Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-12-11 13:41:55 +00:00
Code Issues Packages Projects Releases Wiki Activity
3567bd6dcd
linux/net/dsa/user.c

3805 lines
93 KiB
C
Raw Normal View History

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-27 06:55:01 +00:00
// SPDX-License-Identifier: GPL-2.0-or-later
net: Distributed Switch Architecture protocol support Distributed Switch Architecture is a protocol for managing hardware switch chips. It consists of a set of MII management registers and commands to configure the switch, and an ethernet header format to signal which of the ports of the switch a packet was received from or is intended to be sent to. The switches that this driver supports are typically embedded in access points and routers, and a typical setup with a DSA switch looks something like this: +-----------+ +-----------+ | | RGMII | | | +-------+ +------ 1000baseT MDI ("WAN") | | | 6-port +------ 1000baseT MDI ("LAN1") | CPU | | ethernet +------ 1000baseT MDI ("LAN2") | |MIImgmt| switch +------ 1000baseT MDI ("LAN3") | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4") | | | | +-----------+ +-----------+ The switch driver presents each port on the switch as a separate network interface to Linux, polls the switch to maintain software link state of those ports, forwards MII management interface accesses to those network interfaces (e.g. as done by ethtool) to the switch, and exposes the switch's hardware statistics counters via the appropriate Linux kernel interfaces. This initial patch supports the MII management interface register layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and supports the "Ethertype DSA" packet tagging format. (There is no officially registered ethertype for the Ethertype DSA packet format, so we just grab a random one. The ethertype to use is programmed into the switch, and the switch driver uses the value of ETH_P_EDSA for this, so this define can be changed at any time in the future if the one we chose is allocated to another protocol or if Ethertype DSA gets its own officially registered ethertype, and everything will continue to work.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 13:44:02 +00:00
/*
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
* net/dsa/user.c - user device handling
dsa: add switch chip cascading support The initial version of the DSA driver only supported a single switch chip per network interface, while DSA-capable switch chips can be interconnected to form a tree of switch chips. This patch adds support for multiple switch chips on a network interface. An example topology for a 16-port device with an embedded CPU is as follows: +-----+ +--------+ +--------+ | |eth0 10| switch |9 10| switch | | CPU +----------+ +-------+ | | | | chip 0 | | chip 1 | +-----+ +---++---+ +---++---+ || || || || ||1000baseT ||1000baseT ||ports 1-8 ||ports 9-16 This requires a couple of interdependent changes in the DSA layer: - The dsa platform driver data needs to be extended: there is still only one netdevice per DSA driver instance (eth0 in the example above), but each of the switch chips in the tree needs its own mii_bus device pointer, MII management bus address, and port name array. (include/net/dsa.h) The existing in-tree dsa users need some small changes to deal with this. (arch/arm) - The DSA and Ethertype DSA tagging modules need to be extended to use the DSA device ID field on receive and demultiplex the packet accordingly, and fill in the DSA device ID field on transmit according to which switch chip the packet is heading to. (net/dsa/tag_{dsa,edsa}.c) - The concept of "CPU port", which is the switch chip port that the CPU is connected to (port 10 on switch chip 0 in the example), needs to be extended with the concept of "upstream port", which is the port on the switch chip that will bring us one hop closer to the CPU (port 10 for both switch chips in the example above). - The dsa platform data needs to specify which ports on which switch chips are links to other switch chips, so that we can enable DSA tagging mode on them. (For inter-switch links, we always use non-EtherType DSA tagging, since it has lower overhead. The CPU link uses dsa or edsa tagging depending on what the 'root' switch chip supports.) This is done by specifying "dsa" for the given port in the port array. - The dsa platform data needs to be extended with information on via which port to reach any given switch chip from any given switch chip. This info is specified via the per-switch chip data struct ->rtable[] array, which gives the nexthop ports for each of the other switches in the tree. For the example topology above, the dsa platform data would look something like this: static struct dsa_chip_data sw[2] = { { .mii_bus = &foo, .sw_addr = 1, .port_names[0] = "p1", .port_names[1] = "p2", .port_names[2] = "p3", .port_names[3] = "p4", .port_names[4] = "p5", .port_names[5] = "p6", .port_names[6] = "p7", .port_names[7] = "p8", .port_names[9] = "dsa", .port_names[10] = "cpu", .rtable = (s8 []){ -1, 9, }, }, { .mii_bus = &foo, .sw_addr = 2, .port_names[0] = "p9", .port_names[1] = "p10", .port_names[2] = "p11", .port_names[3] = "p12", .port_names[4] = "p13", .port_names[5] = "p14", .port_names[6] = "p15", .port_names[7] = "p16", .port_names[10] = "dsa", .rtable = (s8 []){ 10, -1, }, }, }, static struct dsa_platform_data pd = { .netdev = &foo, .nr_switches = 2, .sw = sw, }; Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Gary Thomas <gary@mlbassoc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-20 09:52:09 +00:00
* Copyright (c) 2008-2009 Marvell Semiconductor
net: Distributed Switch Architecture protocol support Distributed Switch Architecture is a protocol for managing hardware switch chips. It consists of a set of MII management registers and commands to configure the switch, and an ethernet header format to signal which of the ports of the switch a packet was received from or is intended to be sent to. The switches that this driver supports are typically embedded in access points and routers, and a typical setup with a DSA switch looks something like this: +-----------+ +-----------+ | | RGMII | | | +-------+ +------ 1000baseT MDI ("WAN") | | | 6-port +------ 1000baseT MDI ("LAN1") | CPU | | ethernet +------ 1000baseT MDI ("LAN2") | |MIImgmt| switch +------ 1000baseT MDI ("LAN3") | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4") | | | | +-----------+ +-----------+ The switch driver presents each port on the switch as a separate network interface to Linux, polls the switch to maintain software link state of those ports, forwards MII management interface accesses to those network interfaces (e.g. as done by ethtool) to the switch, and exposes the switch's hardware statistics counters via the appropriate Linux kernel interfaces. This initial patch supports the MII management interface register layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and supports the "Ethertype DSA" packet tagging format. (There is no officially registered ethertype for the Ethertype DSA packet format, so we just grab a random one. The ethertype to use is programmed into the switch, and the switch driver uses the value of ETH_P_EDSA for this, so this define can be changed at any time in the future if the one we chose is allocated to another protocol or if Ethertype DSA gets its own officially registered ethertype, and everything will continue to work.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 13:44:02 +00:00
*/
#include <linux/list.h>
dsa: fix master interface allmulti/promisc handling Before commit b6c40d68ff6498b7f63ddf97cf0aa818d748dee7 ("net: only invoke dev->change_rx_flags when device is UP"), the dsa driver could sort-of get away with only fiddling with the master interface's allmulti/promisc counts in ->change_rx_flags() and not touching them in ->open() or ->stop(). After this commit (note that it was merged almost simultaneously with the dsa patches, which is why this wasn't caught initially), the breakage that was already there became more apparent. Since it makes no sense to keep the master interface's allmulti or promisc count pinned for a slave interface that is down, copy the vlan driver's sync logic (which does exactly what we want) over to dsa to fix this. Bug report from Dirk Teurlings <dirk@upexia.nl> and Peter van Valderen <linux@ddcrew.com>. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Tested-by: Peter van Valderen <linux@ddcrew.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-11 05:53:12 +00:00
#include <linux/etherdevice.h>
net: dsa: integrate with SWITCHDEV for HW bridging In order to support bridging offloads in DSA switch drivers, select NET_SWITCHDEV to get access to the port_stp_update and parent_get_id NDOs that we are required to implement. To facilitate the integratation at the DSA driver level, we implement 3 types of operations: - port_join_bridge - port_leave_bridge - port_stp_update DSA will resolve which switch ports that are currently bridge port members as some Switch hardware/drivers need to know about that to limit the register programming to just the relevant registers (especially for slow MDIO buses). We also take care of setting the correct STP state when slave network devices are brought up/down while being bridge members. Finally, when a port is leaving the bridge, we make sure we set in BR_STATE_FORWARDING state, otherwise the bridge layer would leave it disabled as a result of having left the bridge. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-24 21:15:33 +00:00
#include <linux/netdevice.h>
net: Distributed Switch Architecture protocol support Distributed Switch Architecture is a protocol for managing hardware switch chips. It consists of a set of MII management registers and commands to configure the switch, and an ethernet header format to signal which of the ports of the switch a packet was received from or is intended to be sent to. The switches that this driver supports are typically embedded in access points and routers, and a typical setup with a DSA switch looks something like this: +-----------+ +-----------+ | | RGMII | | | +-------+ +------ 1000baseT MDI ("WAN") | | | 6-port +------ 1000baseT MDI ("LAN1") | CPU | | ethernet +------ 1000baseT MDI ("LAN2") | |MIImgmt| switch +------ 1000baseT MDI ("LAN3") | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4") | | | | +-----------+ +-----------+ The switch driver presents each port on the switch as a separate network interface to Linux, polls the switch to maintain software link state of those ports, forwards MII management interface accesses to those network interfaces (e.g. as done by ethtool) to the switch, and exposes the switch's hardware statistics counters via the appropriate Linux kernel interfaces. This initial patch supports the MII management interface register layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and supports the "Ethertype DSA" packet tagging format. (There is no officially registered ethertype for the Ethertype DSA packet format, so we just grab a random one. The ethertype to use is programmed into the switch, and the switch driver uses the value of ETH_P_EDSA for this, so this define can be changed at any time in the future if the one we chose is allocated to another protocol or if Ethertype DSA gets its own officially registered ethertype, and everything will continue to work.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 13:44:02 +00:00
#include <linux/phy.h>
net: dsa: add includes for ethtool and phy_fixed definitions net/dsa/slave.c uses functions and structures declared in phy_fixed.h but does not explicitely include it, while dsa.h needs structure declarations for 'struct ethtool_wolinfo' and 'struct ethtool_eee', fix those by including the correct header files. Fixes: ec9436baedb6 ("net: dsa: allow drivers to do link adjustment") Fixes: ce31b31c68e7 ("net: dsa: allow updating fixed PHY link information") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-17 23:02:13 +00:00
#include <linux/phy_fixed.h>
net: dsa: Plug in PHYLINK support Add support for PHYLINK within the DSA subsystem in order to support more complex devices such as pluggable (SFP) and non-pluggable (SFF) modules, 10G PHYs, and traditional PHYs. Using PHYLINK allows us to drop some amount of complexity we had while probing fixed and non-fixed PHYs using Device Tree. Because PHYLINK separates the Ethernet MAC/port configuration into different stages, we let switch drivers implement those, and for now, we maintain functionality by calling dsa_slave_adjust_link() during phylink_mac_link_{up,down} which provides semantically equivalent steps. Drivers willing to take advantage of PHYLINK should implement the phylink_mac_* operations that DSA wraps. We cannot quite remove the adjust_link() callback just yet, because a number of drivers rely on that for configuring their "CPU" and "DSA" ports, this is done dsa_port_setup_phy_of() and dsa_port_fixed_link_register_of() still. Drivers that utilize fixed links for user-facing ports (e.g: bcm_sf2) will need to implement phylink_mac_ops from now on to preserve functionality, since PHYLINK *does not* create a phy_device instance for fixed links. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 20:17:36 +00:00
#include <linux/phylink.h>
net: dsa: allow for more complex PHY setups Modify the DSA slave interface to be bound to an arbitray PHY, not just the ones that are available as child PHY devices of the switch MDIO bus. This allows us for instance to have external PHYs connected to a separate MDIO bus, but yet also connected to a given switch port. Under certain configurations, the physical port mask might not be a 1:1 mapping to the MII PHYs mask. This is the case, if e.g: Port 1 of the switch is used and connects to a PHY at a MDIO address different than 1. Introduce a phys_mii_mask variable which allows driver to implement and divert their own MDIO read/writes operations for a subset of the MDIO PHY addresses. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-28 00:04:51 +00:00
#include <linux/of_net.h>
#include <linux/of_mdio.h>
phy: Add API for {un}registering an mdio device to a bus. Rather than have drivers directly manipulate the mii_bus structure, provide and API for registering and unregistering devices on an MDIO bus, and performing lookups. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06 19:11:18 +00:00
#include <linux/mdio.h>
net: dsa: integrate with SWITCHDEV for HW bridging In order to support bridging offloads in DSA switch drivers, select NET_SWITCHDEV to get access to the port_stp_update and parent_get_id NDOs that we are required to implement. To facilitate the integratation at the DSA driver level, we implement 3 types of operations: - port_join_bridge - port_leave_bridge - port_stp_update DSA will resolve which switch ports that are currently bridge port members as some Switch hardware/drivers need to know about that to limit the register programming to just the relevant registers (especially for slow MDIO buses). We also take care of setting the correct STP state when slave network devices are brought up/down while being bridge members. Finally, when a port is leaving the bridge, we make sure we set in BR_STATE_FORWARDING state, otherwise the bridge layer would leave it disabled as a result of having left the bridge. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-24 21:15:33 +00:00
#include <net/rtnetlink.h>
net: dsa: Add plumbing for port mirroring Add necessary plumbing at the slave network device level to have switch drivers implement ndo_setup_tc() and most particularly the cls_matchall classifier. We add support for two switch operations: port_add_mirror and port_del_mirror() which configure, on a per-port basis the mirror parameters requested from the cls_matchall classifier. Code is largely borrowed from the Mellanox Spectrum switch driver. Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 20:41:40 +00:00
#include <net/pkt_cls.h>
net: dsa: enable selftest support for all switches by default Most of generic selftest should be able to work with probably all ethernet controllers. The DSA switches are not exception, so enable it by default at least for DSA. This patch was tested with SJA1105 and AR9331. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19 13:01:06 +00:00
#include <net/selftests.h>
net: dsa: Add plumbing for port mirroring Add necessary plumbing at the slave network device level to have switch drivers implement ndo_setup_tc() and most particularly the cls_matchall classifier. We add support for two switch operations: port_add_mirror and port_del_mirror() which configure, on a per-port basis the mirror parameters requested from the cls_matchall classifier. Code is largely borrowed from the Mellanox Spectrum switch driver. Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 20:41:40 +00:00
#include <net/tc_act/tc_mirred.h>
net: dsa: integrate with SWITCHDEV for HW bridging In order to support bridging offloads in DSA switch drivers, select NET_SWITCHDEV to get access to the port_stp_update and parent_get_id NDOs that we are required to implement. To facilitate the integratation at the DSA driver level, we implement 3 types of operations: - port_join_bridge - port_leave_bridge - port_stp_update DSA will resolve which switch ports that are currently bridge port members as some Switch hardware/drivers need to know about that to limit the register programming to just the relevant registers (especially for slow MDIO buses). We also take care of setting the correct STP state when slave network devices are brought up/down while being bridge members. Finally, when a port is leaving the bridge, we make sure we set in BR_STATE_FORWARDING state, otherwise the bridge layer would leave it disabled as a result of having left the bridge. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-24 21:15:33 +00:00
#include <linux/if_bridge.h>
net: dsa: add support for offloading HSR Add support for offloading of HSR/PRP (IEC 62439-3) tag insertion tag removal, duplicate generation and forwarding on DSA switches. Add DSA_NOTIFIER_HSR_JOIN and DSA_NOTIFIER_HSR_LEAVE which trigger calls to .port_hsr_join and .port_hsr_leave in the DSA driver for the switch. The DSA switch driver should then set netdev feature flags for the HSR/PRP operation that it offloads. NETIF_F_HW_HSR_TAG_INS NETIF_F_HW_HSR_TAG_RM NETIF_F_HW_HSR_FWD NETIF_F_HW_HSR_DUP Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10 01:02:12 +00:00
#include <linux/if_hsr.h>
net: dsa: report and change port default priority using dcbnl The port-based default QoS class is assigned to packets that lack a VLAN PCP (or the port is configured to not trust the VLAN PCP), an IP DSCP (or the port is configured to not trust IP DSCP), and packets on which no tc-skbedit action has matched. Similar to other drivers, this can be exposed to user space using the DCB Application Priority Table. IEEE 802.1Q-2018 specifies in Table D-8 - Sel field values that when the Selector is 1, the Protocol ID value of 0 denotes the "Default application priority. For use when application priority is not otherwise specified." The way in which the dcbnl integration in DSA has been designed has to do with its requirements. Andrew Lunn explains that SOHO switches are expected to come with some sort of pre-configured QoS profile, and that it is desirable for this to come pre-loaded into the DSA slave interfaces' DCB application priority table. In the dcbnl design, this is possible because calls to dcb_ieee_setapp() can be initiated by anyone including being self-initiated by this device driver. However, what makes this challenging to implement in DSA is that the DSA core manages the net_devices (effectively hiding them from drivers), while drivers manage the hardware. The DSA core has no knowledge of what individual drivers' QoS policies are. DSA could export to drivers a wrapper over dcb_ieee_setapp() and these could call that function to pre-populate the app priority table, however drivers don't have a good moment in time to do this. The dsa_switch_ops :: setup() method gets called before the net_devices are created (dsa_slave_create), and so is dsa_switch_ops :: port_setup(). What remains is dsa_switch_ops :: port_enable(), but this gets called upon each ndo_open. If we add app table entries on every open, we'd need to remove them on close, to avoid duplicate entry errors. But if we delete app priority entries on close, what we delete may not be the initial, driver pre-populated entries, but rather user-added entries. So it is clear that letting drivers choose the timing of the dcb_ieee_setapp() call is inappropriate. The alternative which was chosen is to introduce hardware-specific ops in dsa_switch_ops, and effectively hide dcbnl details from drivers as well. For pre-populating the application table, dsa_slave_dcbnl_init() will call ds->ops->port_get_default_prio() which is supposed to read from hardware. If the operation succeeds, DSA creates a default-prio app table entry. The method is called as soon as the slave_dev is registered, but before we release the rtnl_mutex. This is done such that user space sees the app table entries as soon as it sees the interface being registered. The fact that we populate slave_dev->dcbnl_ops with a non-NULL pointer changes behavior in dcb_doit() from net/dcb/dcbnl.c, which used to return -EOPNOTSUPP for any dcbnl operation where netdev->dcbnl_ops is NULL. Because there are still dcbnl-unaware DSA drivers even if they have dcbnl_ops populated, the way to restore the behavior is to make all dcbnl_ops return -EOPNOTSUPP on absence of the hardware-specific dsa_switch_ops method. The dcbnl framework absurdly allows there to be more than one app table entry for the same selector and protocol (in other words, more than one port-based default priority). In the iproute2 dcb program, there is a "replace" syntactical sugar command which performs an "add" and a "del" to hide this away. But we choose the largest configured priority when we call ds->ops->port_set_default_prio(), using __fls(). When there is no default-prio app table entry left, the port-default priority is restored to 0. Link: https://patchwork.kernel.org/project/netdevbpf/patch/20210113154139.1803705-2-olteanv@gmail.com/ Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-11 21:15:18 +00:00
#include <net/dcbnl.h>
net: dsa: Add netconsole support Add support for using DSA slave network devices with netconsole, which requires us to allocate and free custom netpoll instances and invoke the parent network device poll controller callback. In order for netconsole to work, we need to construct the DSA tag, but not queue the skb for transmission on the master network device xmit function. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-31 18:42:57 +00:00
#include <linux/netpoll.h>
net: dsa: remove deprecated strncpy `strncpy` is deprecated for use on NUL-terminated destination strings [1]. Even call sites utilizing length-bounded destination buffers should switch over to using `strtomem` or `strtomem_pad`. In this case, however, the compiler is unable to determine the size of the `data` buffer which renders `strtomem` unusable. Due to this, `strscpy` should be used. It should be noted that most call sites already zero-initialize the destination buffer. However, I've opted to use `strscpy_pad` to maintain the same exact behavior that `strncpy` produced (zero-padded tail up to `len`). Also see [3]. [1]: www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [2]: elixir.bootlin.com/linux/v6.3/source/net/ethtool/ioctl.c#L1944 [3]: manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html Link: https://github.com/KSPP/linux/issues/90 Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Justin Stitt <justinstitt@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-18 22:56:38 +00:00
#include <linux/string.h>
net: dsa: include dsa.h only once The public include/net/dsa.h file is meant for DSA drivers, while all DSA core files share a common private header net/dsa/dsa_priv.h file. Ensure that dsa_priv.h is the only DSA core file to include net/dsa.h, and add a new line to separate absolute and relative headers at the same time. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17 19:46:03 +00:00
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
#include "conduit.h"
net: dsa: rename dsa2.c back into dsa.c and create its header The previous change moved the code into the larger file (dsa2.c) to minimize the delta. Rename that now to dsa.c, and create dsa.h, where all related definitions from dsa_priv.h go. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-21 13:55:52 +00:00
#include "dsa.h"
net: dsa: kill off dsa_priv.h The last remnants in dsa_priv.h are a netlink-related definition for which we create a new header, and DSA_MAX_NUM_OFFLOADING_BRIDGES which is only used from dsa.c, so move it there. Some inclusions need to be adjusted now that we no longer have headers included transitively from dsa_priv.h. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-21 13:55:55 +00:00
#include "netlink.h"
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
#include "port.h"
net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses When using the felix driver (the only one which supports UC filtering and MC filtering) as a DSA master for a random other DSA switch, one can see the following stack trace when the downstream switch ports join a VLAN-aware bridge: ============================= WARNING: suspicious RCU usage ----------------------------- net/8021q/vlan_core.c:238 suspicious rcu_dereference_protected() usage! stack backtrace: Workqueue: dsa_ordered dsa_slave_switchdev_event_work Call trace: lockdep_rcu_suspicious+0x170/0x210 vlan_for_each+0x8c/0x188 dsa_slave_sync_uc+0x128/0x178 __hw_addr_sync_dev+0x138/0x158 dsa_slave_set_rx_mode+0x58/0x70 __dev_set_rx_mode+0x88/0xa8 dev_uc_add+0x74/0xa0 dsa_port_bridge_host_fdb_add+0xec/0x180 dsa_slave_switchdev_event_work+0x7c/0x1c8 process_one_work+0x290/0x568 What it's saying is that vlan_for_each() expects rtnl_lock() context and it's not getting it, when it's called from the DSA master's ndo_set_rx_mode(). The caller of that - dsa_slave_set_rx_mode() - is the slave DSA interface's dsa_port_bridge_host_fdb_add() which comes from the deferred dsa_slave_switchdev_event_work(). We went to great lengths to avoid the rtnl_lock() context in that call path in commit 0faf890fc519 ("net: dsa: drop rtnl_lock from dsa_slave_switchdev_event_work"), and calling rtnl_lock() is simply not an option due to the possibility of deadlocking when calling dsa_flush_workqueue() from the call paths that do hold rtnl_lock() - basically all of them. So, when the DSA master calls vlan_for_each() from its ndo_set_rx_mode(), the state of the 8021q driver on this device is really not protected from concurrent access by anything. Looking at net/8021q/, I don't think that vlan_info->vid_list was particularly designed with RCU traversal in mind, so introducing an RCU read-side form of vlan_for_each() - vlan_for_each_rcu() - won't be so easy, and it also wouldn't be exactly what we need anyway. In general I believe that the solution isn't in net/8021q/ anyway; vlan_for_each() is not cut out for this task. DSA doesn't need rtnl_lock() to be held per se - since it's not a netdev state change that we're blocking, but rather, just concurrent additions/removals to a VLAN list. We don't even need sleepable context - the callback of vlan_for_each() just schedules deferred work. The proposed escape is to remove the dependency on vlan_for_each() and to open-code a non-sleepable, rtnl-free alternative to that, based on copies of the VLAN list modified from .ndo_vlan_rx_add_vid() and .ndo_vlan_rx_kill_vid(). Fixes: 64fdc5f341db ("net: dsa: sync unicast and multicast addresses for VLAN filters too") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20230626154402.3154454-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-26 15:44:02 +00:00
#include "switch.h"
net: dsa: move tagging protocol code to tag.{c,h} It would be nice if tagging protocol drivers could include just the header they need, since they are (mostly) data path and isolated from most of the other DSA core code does. Create a tag.c and a tag.h file which are meant to support tagging protocol drivers. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-21 13:55:47 +00:00
#include "tag.h"
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
#include "user.h"
net: Distributed Switch Architecture protocol support Distributed Switch Architecture is a protocol for managing hardware switch chips. It consists of a set of MII management registers and commands to configure the switch, and an ethernet header format to signal which of the ports of the switch a packet was received from or is intended to be sent to. The switches that this driver supports are typically embedded in access points and routers, and a typical setup with a DSA switch looks something like this: +-----------+ +-----------+ | | RGMII | | | +-------+ +------ 1000baseT MDI ("WAN") | | | 6-port +------ 1000baseT MDI ("LAN1") | CPU | | ethernet +------ 1000baseT MDI ("LAN2") | |MIImgmt| switch +------ 1000baseT MDI ("LAN3") | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4") | | | | +-----------+ +-----------+ The switch driver presents each port on the switch as a separate network interface to Linux, polls the switch to maintain software link state of those ports, forwards MII management interface accesses to those network interfaces (e.g. as done by ethtool) to the switch, and exposes the switch's hardware statistics counters via the appropriate Linux kernel interfaces. This initial patch supports the MII management interface register layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and supports the "Ethertype DSA" packet tagging format. (There is no officially registered ethertype for the Ethertype DSA packet format, so we just grab a random one. The ethertype to use is programmed into the switch, and the switch driver uses the value of ETH_P_EDSA for this, so this define can be changed at any time in the future if the one we chose is allocated to another protocol or if Ethertype DSA gets its own officially registered ethertype, and everything will continue to work.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 13:44:02 +00:00
net: dsa: move definitions from dsa_priv.h to slave.c There are some definitions in dsa_priv.h which are only used from slave.c. So move them to slave.c. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-21 13:55:53 +00:00
struct dsa_switchdev_event_work {
struct net_device *dev;
struct net_device *orig_dev;
struct work_struct work;
unsigned long event;
/* Specific for SWITCHDEV_FDB_ADD_TO_DEVICE and
* SWITCHDEV_FDB_DEL_TO_DEVICE
*/
unsigned char addr[ETH_ALEN];
u16 vid;
bool host_addr;
};
enum dsa_standalone_event {
DSA_UC_ADD,
DSA_UC_DEL,
DSA_MC_ADD,
DSA_MC_DEL,
};
struct dsa_standalone_event_work {
struct work_struct work;
struct net_device *dev;
enum dsa_standalone_event event;
unsigned char addr[ETH_ALEN];
u16 vid;
};
net: dsa: sync unicast and multicast addresses for VLAN filters too If certain conditions are met, DSA can install all necessary MAC addresses on the CPU ports as FDB entries and disable flooding towards the CPU (we call this RX filtering). There is one corner case where this does not work. ip link add br0 type bridge vlan_filtering 1 && ip link set br0 up ip link set swp0 master br0 && ip link set swp0 up ip link add link swp0 name swp0.100 type vlan id 100 ip link set swp0.100 up && ip addr add 192.168.100.1/24 dev swp0.100 Traffic through swp0.100 is broken, because the bridge turns on VLAN filtering in the swp0 port (causing RX packets to be classified to the FDB database corresponding to the VID from their 802.1Q header), and although the 8021q module does call dev_uc_add() towards the real device, that API is VLAN-unaware, so it only contains the MAC address, not the VID; and DSA's current implementation of ndo_set_rx_mode() is only for VID 0 (corresponding to FDB entries which are installed in an FDB database which is only hit when the port is VLAN-unaware). It's interesting to understand why the bridge does not turn on IFF_PROMISC for its swp0 bridge port, and it may appear at first glance that this is a regression caused by the logic in commit 2796d0c648c9 ("bridge: Automatically manage port promiscuous mode."). After all, a bridge port needs to have IFF_PROMISC by its very nature - it needs to receive and forward frames with a MAC DA different from the bridge ports' MAC addresses. While that may be true, when the bridge is VLAN-aware *and* it has a single port, there is no real reason to enable promiscuity even if that is an automatic port, with flooding and learning (there is nowhere for packets to go except to the BR_FDB_LOCAL entries), and this is how the corner case appears. Adding a second automatic interface to the bridge would make swp0 promisc as well, and would mask the corner case. Given the dev_uc_add() / ndo_set_rx_mode() API is what it is (it doesn't pass a VLAN ID), the only way to address that problem is to install host FDB entries for the cartesian product of RX filtering MAC addresses and VLAN RX filters. Fixes: 7569459a52c9 ("net: dsa: manage flooding on the CPU ports") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230329151821.745752-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-29 15:18:21 +00:00
struct dsa_host_vlan_rx_filtering_ctx {
struct net_device *dev;
const unsigned char *addr;
enum dsa_standalone_event event;
};
net: dsa: move definitions from dsa_priv.h to slave.c There are some definitions in dsa_priv.h which are only used from slave.c. So move them to slave.c. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-21 13:55:53 +00:00
static bool dsa_switch_supports_uc_filtering(struct dsa_switch *ds)
{
return ds->ops->port_fdb_add && ds->ops->port_fdb_del &&
ds->fdb_isolation && !ds->vlan_filtering_is_global &&
!ds->needs_standalone_vlan_filtering;
}
static bool dsa_switch_supports_mc_filtering(struct dsa_switch *ds)
{
return ds->ops->port_mdb_add && ds->ops->port_mdb_del &&
ds->fdb_isolation && !ds->vlan_filtering_is_global &&
!ds->needs_standalone_vlan_filtering;
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static void dsa_user_standalone_event_work(struct work_struct *work)
net: dsa: install secondary unicast and multicast addresses as host FDB/MDB In preparation of disabling flooding towards the CPU in standalone ports mode, identify the addresses requested by upper interfaces and use the new API for DSA FDB isolation to request the hardware driver to offload these as FDB or MDB objects. The objects belong to the user port's database, and are installed pointing towards the CPU port. Because dev_uc_add()/dev_mc_add() is VLAN-unaware, we offload to the port standalone database addresses with VID 0 (also VLAN-unaware). So this excludes switches with global VLAN filtering from supporting unicast filtering, because there, it is possible for a port of a switch to join a VLAN-aware bridge, and this changes the VLAN awareness of standalone ports, requiring VLAN-aware standalone host FDB entries. For the same reason, hellcreek, which requires VLAN awareness in standalone mode, is also exempted from unicast filtering. We create "standalone" variants of dsa_port_host_fdb_add() and dsa_port_host_mdb_add() (and the _del coresponding functions). We also create a separate work item type for handling deferred standalone host FDB/MDB entries compared to the switchdev one. This is done for the purpose of clarity - the procedure for offloading a bridge FDB entry is different than offloading a standalone one, and the switchdev event work handles only FDBs anyway, not MDBs. Deferral is needed for standalone entries because ndo_set_rx_mode runs in atomic context. We could probably optimize things a little by first queuing up all entries that need to be offloaded, and scheduling the work item just once, but the data structures that we can pass through __dev_uc_sync() and __dev_mc_sync() are limiting (there is nothing like a void *priv), so we'd have to keep the list of queued events somewhere in struct dsa_switch, and possibly a lock for it. Too complicated for now. Adding the address to the master is handled by dev_uc_sync(), adding it to the hardware is handled by __dev_uc_sync(). So this is the reason why dsa_port_standalone_host_fdb_add() does not call dev_uc_add(). Not that it had the rtnl_mutex anyway - ndo_set_rx_mode has it, but is atomic. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 19:14:10 +00:00
{
struct dsa_standalone_event_work *standalone_work =
container_of(work, struct dsa_standalone_event_work, work);
const unsigned char *addr = standalone_work->addr;
struct net_device *dev = standalone_work->dev;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: install secondary unicast and multicast addresses as host FDB/MDB In preparation of disabling flooding towards the CPU in standalone ports mode, identify the addresses requested by upper interfaces and use the new API for DSA FDB isolation to request the hardware driver to offload these as FDB or MDB objects. The objects belong to the user port's database, and are installed pointing towards the CPU port. Because dev_uc_add()/dev_mc_add() is VLAN-unaware, we offload to the port standalone database addresses with VID 0 (also VLAN-unaware). So this excludes switches with global VLAN filtering from supporting unicast filtering, because there, it is possible for a port of a switch to join a VLAN-aware bridge, and this changes the VLAN awareness of standalone ports, requiring VLAN-aware standalone host FDB entries. For the same reason, hellcreek, which requires VLAN awareness in standalone mode, is also exempted from unicast filtering. We create "standalone" variants of dsa_port_host_fdb_add() and dsa_port_host_mdb_add() (and the _del coresponding functions). We also create a separate work item type for handling deferred standalone host FDB/MDB entries compared to the switchdev one. This is done for the purpose of clarity - the procedure for offloading a bridge FDB entry is different than offloading a standalone one, and the switchdev event work handles only FDBs anyway, not MDBs. Deferral is needed for standalone entries because ndo_set_rx_mode runs in atomic context. We could probably optimize things a little by first queuing up all entries that need to be offloaded, and scheduling the work item just once, but the data structures that we can pass through __dev_uc_sync() and __dev_mc_sync() are limiting (there is nothing like a void *priv), so we'd have to keep the list of queued events somewhere in struct dsa_switch, and possibly a lock for it. Too complicated for now. Adding the address to the master is handled by dev_uc_sync(), adding it to the hardware is handled by __dev_uc_sync(). So this is the reason why dsa_port_standalone_host_fdb_add() does not call dev_uc_add(). Not that it had the rtnl_mutex anyway - ndo_set_rx_mode has it, but is atomic. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 19:14:10 +00:00
struct switchdev_obj_port_mdb mdb;
struct dsa_switch *ds = dp->ds;
u16 vid = standalone_work->vid;
int err;
switch (standalone_work->event) {
case DSA_UC_ADD:
err = dsa_port_standalone_host_fdb_add(dp, addr, vid);
if (err) {
dev_err(ds->dev,
"port %d failed to add %pM vid %d to fdb: %d\n",
dp->index, addr, vid, err);
break;
}
break;
case DSA_UC_DEL:
err = dsa_port_standalone_host_fdb_del(dp, addr, vid);
if (err) {
dev_err(ds->dev,
"port %d failed to delete %pM vid %d from fdb: %d\n",
dp->index, addr, vid, err);
}
break;
case DSA_MC_ADD:
ether_addr_copy(mdb.addr, addr);
mdb.vid = vid;
err = dsa_port_standalone_host_mdb_add(dp, &mdb);
if (err) {
dev_err(ds->dev,
"port %d failed to add %pM vid %d to mdb: %d\n",
dp->index, addr, vid, err);
break;
}
break;
case DSA_MC_DEL:
ether_addr_copy(mdb.addr, addr);
mdb.vid = vid;
err = dsa_port_standalone_host_mdb_del(dp, &mdb);
if (err) {
dev_err(ds->dev,
"port %d failed to delete %pM vid %d from mdb: %d\n",
dp->index, addr, vid, err);
}
break;
}
kfree(standalone_work);
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_schedule_standalone_work(struct net_device *dev,
enum dsa_standalone_event event,
const unsigned char *addr,
u16 vid)
net: dsa: install secondary unicast and multicast addresses as host FDB/MDB In preparation of disabling flooding towards the CPU in standalone ports mode, identify the addresses requested by upper interfaces and use the new API for DSA FDB isolation to request the hardware driver to offload these as FDB or MDB objects. The objects belong to the user port's database, and are installed pointing towards the CPU port. Because dev_uc_add()/dev_mc_add() is VLAN-unaware, we offload to the port standalone database addresses with VID 0 (also VLAN-unaware). So this excludes switches with global VLAN filtering from supporting unicast filtering, because there, it is possible for a port of a switch to join a VLAN-aware bridge, and this changes the VLAN awareness of standalone ports, requiring VLAN-aware standalone host FDB entries. For the same reason, hellcreek, which requires VLAN awareness in standalone mode, is also exempted from unicast filtering. We create "standalone" variants of dsa_port_host_fdb_add() and dsa_port_host_mdb_add() (and the _del coresponding functions). We also create a separate work item type for handling deferred standalone host FDB/MDB entries compared to the switchdev one. This is done for the purpose of clarity - the procedure for offloading a bridge FDB entry is different than offloading a standalone one, and the switchdev event work handles only FDBs anyway, not MDBs. Deferral is needed for standalone entries because ndo_set_rx_mode runs in atomic context. We could probably optimize things a little by first queuing up all entries that need to be offloaded, and scheduling the work item just once, but the data structures that we can pass through __dev_uc_sync() and __dev_mc_sync() are limiting (there is nothing like a void *priv), so we'd have to keep the list of queued events somewhere in struct dsa_switch, and possibly a lock for it. Too complicated for now. Adding the address to the master is handled by dev_uc_sync(), adding it to the hardware is handled by __dev_uc_sync(). So this is the reason why dsa_port_standalone_host_fdb_add() does not call dev_uc_add(). Not that it had the rtnl_mutex anyway - ndo_set_rx_mode has it, but is atomic. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 19:14:10 +00:00
{
struct dsa_standalone_event_work *standalone_work;
standalone_work = kzalloc(sizeof(*standalone_work), GFP_ATOMIC);
if (!standalone_work)
return -ENOMEM;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
INIT_WORK(&standalone_work->work, dsa_user_standalone_event_work);
net: dsa: install secondary unicast and multicast addresses as host FDB/MDB In preparation of disabling flooding towards the CPU in standalone ports mode, identify the addresses requested by upper interfaces and use the new API for DSA FDB isolation to request the hardware driver to offload these as FDB or MDB objects. The objects belong to the user port's database, and are installed pointing towards the CPU port. Because dev_uc_add()/dev_mc_add() is VLAN-unaware, we offload to the port standalone database addresses with VID 0 (also VLAN-unaware). So this excludes switches with global VLAN filtering from supporting unicast filtering, because there, it is possible for a port of a switch to join a VLAN-aware bridge, and this changes the VLAN awareness of standalone ports, requiring VLAN-aware standalone host FDB entries. For the same reason, hellcreek, which requires VLAN awareness in standalone mode, is also exempted from unicast filtering. We create "standalone" variants of dsa_port_host_fdb_add() and dsa_port_host_mdb_add() (and the _del coresponding functions). We also create a separate work item type for handling deferred standalone host FDB/MDB entries compared to the switchdev one. This is done for the purpose of clarity - the procedure for offloading a bridge FDB entry is different than offloading a standalone one, and the switchdev event work handles only FDBs anyway, not MDBs. Deferral is needed for standalone entries because ndo_set_rx_mode runs in atomic context. We could probably optimize things a little by first queuing up all entries that need to be offloaded, and scheduling the work item just once, but the data structures that we can pass through __dev_uc_sync() and __dev_mc_sync() are limiting (there is nothing like a void *priv), so we'd have to keep the list of queued events somewhere in struct dsa_switch, and possibly a lock for it. Too complicated for now. Adding the address to the master is handled by dev_uc_sync(), adding it to the hardware is handled by __dev_uc_sync(). So this is the reason why dsa_port_standalone_host_fdb_add() does not call dev_uc_add(). Not that it had the rtnl_mutex anyway - ndo_set_rx_mode has it, but is atomic. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 19:14:10 +00:00
standalone_work->event = event;
standalone_work->dev = dev;
ether_addr_copy(standalone_work->addr, addr);
standalone_work->vid = vid;
dsa_schedule_work(&standalone_work->work);
return 0;
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_host_vlan_rx_filtering(void *arg, int vid)
net: dsa: sync unicast and multicast addresses for VLAN filters too If certain conditions are met, DSA can install all necessary MAC addresses on the CPU ports as FDB entries and disable flooding towards the CPU (we call this RX filtering). There is one corner case where this does not work. ip link add br0 type bridge vlan_filtering 1 && ip link set br0 up ip link set swp0 master br0 && ip link set swp0 up ip link add link swp0 name swp0.100 type vlan id 100 ip link set swp0.100 up && ip addr add 192.168.100.1/24 dev swp0.100 Traffic through swp0.100 is broken, because the bridge turns on VLAN filtering in the swp0 port (causing RX packets to be classified to the FDB database corresponding to the VID from their 802.1Q header), and although the 8021q module does call dev_uc_add() towards the real device, that API is VLAN-unaware, so it only contains the MAC address, not the VID; and DSA's current implementation of ndo_set_rx_mode() is only for VID 0 (corresponding to FDB entries which are installed in an FDB database which is only hit when the port is VLAN-unaware). It's interesting to understand why the bridge does not turn on IFF_PROMISC for its swp0 bridge port, and it may appear at first glance that this is a regression caused by the logic in commit 2796d0c648c9 ("bridge: Automatically manage port promiscuous mode."). After all, a bridge port needs to have IFF_PROMISC by its very nature - it needs to receive and forward frames with a MAC DA different from the bridge ports' MAC addresses. While that may be true, when the bridge is VLAN-aware *and* it has a single port, there is no real reason to enable promiscuity even if that is an automatic port, with flooding and learning (there is nowhere for packets to go except to the BR_FDB_LOCAL entries), and this is how the corner case appears. Adding a second automatic interface to the bridge would make swp0 promisc as well, and would mask the corner case. Given the dev_uc_add() / ndo_set_rx_mode() API is what it is (it doesn't pass a VLAN ID), the only way to address that problem is to install host FDB entries for the cartesian product of RX filtering MAC addresses and VLAN RX filters. Fixes: 7569459a52c9 ("net: dsa: manage flooding on the CPU ports") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230329151821.745752-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-29 15:18:21 +00:00
{
struct dsa_host_vlan_rx_filtering_ctx *ctx = arg;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
return dsa_user_schedule_standalone_work(ctx->dev, ctx->event,
net: dsa: sync unicast and multicast addresses for VLAN filters too If certain conditions are met, DSA can install all necessary MAC addresses on the CPU ports as FDB entries and disable flooding towards the CPU (we call this RX filtering). There is one corner case where this does not work. ip link add br0 type bridge vlan_filtering 1 && ip link set br0 up ip link set swp0 master br0 && ip link set swp0 up ip link add link swp0 name swp0.100 type vlan id 100 ip link set swp0.100 up && ip addr add 192.168.100.1/24 dev swp0.100 Traffic through swp0.100 is broken, because the bridge turns on VLAN filtering in the swp0 port (causing RX packets to be classified to the FDB database corresponding to the VID from their 802.1Q header), and although the 8021q module does call dev_uc_add() towards the real device, that API is VLAN-unaware, so it only contains the MAC address, not the VID; and DSA's current implementation of ndo_set_rx_mode() is only for VID 0 (corresponding to FDB entries which are installed in an FDB database which is only hit when the port is VLAN-unaware). It's interesting to understand why the bridge does not turn on IFF_PROMISC for its swp0 bridge port, and it may appear at first glance that this is a regression caused by the logic in commit 2796d0c648c9 ("bridge: Automatically manage port promiscuous mode."). After all, a bridge port needs to have IFF_PROMISC by its very nature - it needs to receive and forward frames with a MAC DA different from the bridge ports' MAC addresses. While that may be true, when the bridge is VLAN-aware *and* it has a single port, there is no real reason to enable promiscuity even if that is an automatic port, with flooding and learning (there is nowhere for packets to go except to the BR_FDB_LOCAL entries), and this is how the corner case appears. Adding a second automatic interface to the bridge would make swp0 promisc as well, and would mask the corner case. Given the dev_uc_add() / ndo_set_rx_mode() API is what it is (it doesn't pass a VLAN ID), the only way to address that problem is to install host FDB entries for the cartesian product of RX filtering MAC addresses and VLAN RX filters. Fixes: 7569459a52c9 ("net: dsa: manage flooding on the CPU ports") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230329151821.745752-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-29 15:18:21 +00:00
ctx->addr, vid);
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_vlan_for_each(struct net_device *dev,
int (*cb)(void *arg, int vid), void *arg)
net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses When using the felix driver (the only one which supports UC filtering and MC filtering) as a DSA master for a random other DSA switch, one can see the following stack trace when the downstream switch ports join a VLAN-aware bridge: ============================= WARNING: suspicious RCU usage ----------------------------- net/8021q/vlan_core.c:238 suspicious rcu_dereference_protected() usage! stack backtrace: Workqueue: dsa_ordered dsa_slave_switchdev_event_work Call trace: lockdep_rcu_suspicious+0x170/0x210 vlan_for_each+0x8c/0x188 dsa_slave_sync_uc+0x128/0x178 __hw_addr_sync_dev+0x138/0x158 dsa_slave_set_rx_mode+0x58/0x70 __dev_set_rx_mode+0x88/0xa8 dev_uc_add+0x74/0xa0 dsa_port_bridge_host_fdb_add+0xec/0x180 dsa_slave_switchdev_event_work+0x7c/0x1c8 process_one_work+0x290/0x568 What it's saying is that vlan_for_each() expects rtnl_lock() context and it's not getting it, when it's called from the DSA master's ndo_set_rx_mode(). The caller of that - dsa_slave_set_rx_mode() - is the slave DSA interface's dsa_port_bridge_host_fdb_add() which comes from the deferred dsa_slave_switchdev_event_work(). We went to great lengths to avoid the rtnl_lock() context in that call path in commit 0faf890fc519 ("net: dsa: drop rtnl_lock from dsa_slave_switchdev_event_work"), and calling rtnl_lock() is simply not an option due to the possibility of deadlocking when calling dsa_flush_workqueue() from the call paths that do hold rtnl_lock() - basically all of them. So, when the DSA master calls vlan_for_each() from its ndo_set_rx_mode(), the state of the 8021q driver on this device is really not protected from concurrent access by anything. Looking at net/8021q/, I don't think that vlan_info->vid_list was particularly designed with RCU traversal in mind, so introducing an RCU read-side form of vlan_for_each() - vlan_for_each_rcu() - won't be so easy, and it also wouldn't be exactly what we need anyway. In general I believe that the solution isn't in net/8021q/ anyway; vlan_for_each() is not cut out for this task. DSA doesn't need rtnl_lock() to be held per se - since it's not a netdev state change that we're blocking, but rather, just concurrent additions/removals to a VLAN list. We don't even need sleepable context - the callback of vlan_for_each() just schedules deferred work. The proposed escape is to remove the dependency on vlan_for_each() and to open-code a non-sleepable, rtnl-free alternative to that, based on copies of the VLAN list modified from .ndo_vlan_rx_add_vid() and .ndo_vlan_rx_kill_vid(). Fixes: 64fdc5f341db ("net: dsa: sync unicast and multicast addresses for VLAN filters too") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20230626154402.3154454-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-26 15:44:02 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses When using the felix driver (the only one which supports UC filtering and MC filtering) as a DSA master for a random other DSA switch, one can see the following stack trace when the downstream switch ports join a VLAN-aware bridge: ============================= WARNING: suspicious RCU usage ----------------------------- net/8021q/vlan_core.c:238 suspicious rcu_dereference_protected() usage! stack backtrace: Workqueue: dsa_ordered dsa_slave_switchdev_event_work Call trace: lockdep_rcu_suspicious+0x170/0x210 vlan_for_each+0x8c/0x188 dsa_slave_sync_uc+0x128/0x178 __hw_addr_sync_dev+0x138/0x158 dsa_slave_set_rx_mode+0x58/0x70 __dev_set_rx_mode+0x88/0xa8 dev_uc_add+0x74/0xa0 dsa_port_bridge_host_fdb_add+0xec/0x180 dsa_slave_switchdev_event_work+0x7c/0x1c8 process_one_work+0x290/0x568 What it's saying is that vlan_for_each() expects rtnl_lock() context and it's not getting it, when it's called from the DSA master's ndo_set_rx_mode(). The caller of that - dsa_slave_set_rx_mode() - is the slave DSA interface's dsa_port_bridge_host_fdb_add() which comes from the deferred dsa_slave_switchdev_event_work(). We went to great lengths to avoid the rtnl_lock() context in that call path in commit 0faf890fc519 ("net: dsa: drop rtnl_lock from dsa_slave_switchdev_event_work"), and calling rtnl_lock() is simply not an option due to the possibility of deadlocking when calling dsa_flush_workqueue() from the call paths that do hold rtnl_lock() - basically all of them. So, when the DSA master calls vlan_for_each() from its ndo_set_rx_mode(), the state of the 8021q driver on this device is really not protected from concurrent access by anything. Looking at net/8021q/, I don't think that vlan_info->vid_list was particularly designed with RCU traversal in mind, so introducing an RCU read-side form of vlan_for_each() - vlan_for_each_rcu() - won't be so easy, and it also wouldn't be exactly what we need anyway. In general I believe that the solution isn't in net/8021q/ anyway; vlan_for_each() is not cut out for this task. DSA doesn't need rtnl_lock() to be held per se - since it's not a netdev state change that we're blocking, but rather, just concurrent additions/removals to a VLAN list. We don't even need sleepable context - the callback of vlan_for_each() just schedules deferred work. The proposed escape is to remove the dependency on vlan_for_each() and to open-code a non-sleepable, rtnl-free alternative to that, based on copies of the VLAN list modified from .ndo_vlan_rx_add_vid() and .ndo_vlan_rx_kill_vid(). Fixes: 64fdc5f341db ("net: dsa: sync unicast and multicast addresses for VLAN filters too") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20230626154402.3154454-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-26 15:44:02 +00:00
struct dsa_vlan *v;
int err;
lockdep_assert_held(&dev->addr_list_lock);
err = cb(arg, 0);
if (err)
return err;
list_for_each_entry(v, &dp->user_vlans, list) {
err = cb(arg, v->vid);
if (err)
return err;
}
return 0;
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_sync_uc(struct net_device *dev,
const unsigned char *addr)
net: dsa: install secondary unicast and multicast addresses as host FDB/MDB In preparation of disabling flooding towards the CPU in standalone ports mode, identify the addresses requested by upper interfaces and use the new API for DSA FDB isolation to request the hardware driver to offload these as FDB or MDB objects. The objects belong to the user port's database, and are installed pointing towards the CPU port. Because dev_uc_add()/dev_mc_add() is VLAN-unaware, we offload to the port standalone database addresses with VID 0 (also VLAN-unaware). So this excludes switches with global VLAN filtering from supporting unicast filtering, because there, it is possible for a port of a switch to join a VLAN-aware bridge, and this changes the VLAN awareness of standalone ports, requiring VLAN-aware standalone host FDB entries. For the same reason, hellcreek, which requires VLAN awareness in standalone mode, is also exempted from unicast filtering. We create "standalone" variants of dsa_port_host_fdb_add() and dsa_port_host_mdb_add() (and the _del coresponding functions). We also create a separate work item type for handling deferred standalone host FDB/MDB entries compared to the switchdev one. This is done for the purpose of clarity - the procedure for offloading a bridge FDB entry is different than offloading a standalone one, and the switchdev event work handles only FDBs anyway, not MDBs. Deferral is needed for standalone entries because ndo_set_rx_mode runs in atomic context. We could probably optimize things a little by first queuing up all entries that need to be offloaded, and scheduling the work item just once, but the data structures that we can pass through __dev_uc_sync() and __dev_mc_sync() are limiting (there is nothing like a void *priv), so we'd have to keep the list of queued events somewhere in struct dsa_switch, and possibly a lock for it. Too complicated for now. Adding the address to the master is handled by dev_uc_sync(), adding it to the hardware is handled by __dev_uc_sync(). So this is the reason why dsa_port_standalone_host_fdb_add() does not call dev_uc_add(). Not that it had the rtnl_mutex anyway - ndo_set_rx_mode has it, but is atomic. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 19:14:10 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct net_device *conduit = dsa_user_to_conduit(dev);
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: sync unicast and multicast addresses for VLAN filters too If certain conditions are met, DSA can install all necessary MAC addresses on the CPU ports as FDB entries and disable flooding towards the CPU (we call this RX filtering). There is one corner case where this does not work. ip link add br0 type bridge vlan_filtering 1 && ip link set br0 up ip link set swp0 master br0 && ip link set swp0 up ip link add link swp0 name swp0.100 type vlan id 100 ip link set swp0.100 up && ip addr add 192.168.100.1/24 dev swp0.100 Traffic through swp0.100 is broken, because the bridge turns on VLAN filtering in the swp0 port (causing RX packets to be classified to the FDB database corresponding to the VID from their 802.1Q header), and although the 8021q module does call dev_uc_add() towards the real device, that API is VLAN-unaware, so it only contains the MAC address, not the VID; and DSA's current implementation of ndo_set_rx_mode() is only for VID 0 (corresponding to FDB entries which are installed in an FDB database which is only hit when the port is VLAN-unaware). It's interesting to understand why the bridge does not turn on IFF_PROMISC for its swp0 bridge port, and it may appear at first glance that this is a regression caused by the logic in commit 2796d0c648c9 ("bridge: Automatically manage port promiscuous mode."). After all, a bridge port needs to have IFF_PROMISC by its very nature - it needs to receive and forward frames with a MAC DA different from the bridge ports' MAC addresses. While that may be true, when the bridge is VLAN-aware *and* it has a single port, there is no real reason to enable promiscuity even if that is an automatic port, with flooding and learning (there is nowhere for packets to go except to the BR_FDB_LOCAL entries), and this is how the corner case appears. Adding a second automatic interface to the bridge would make swp0 promisc as well, and would mask the corner case. Given the dev_uc_add() / ndo_set_rx_mode() API is what it is (it doesn't pass a VLAN ID), the only way to address that problem is to install host FDB entries for the cartesian product of RX filtering MAC addresses and VLAN RX filters. Fixes: 7569459a52c9 ("net: dsa: manage flooding on the CPU ports") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230329151821.745752-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-29 15:18:21 +00:00
struct dsa_host_vlan_rx_filtering_ctx ctx = {
.dev = dev,
.addr = addr,
.event = DSA_UC_ADD,
};
net: dsa: fix missing host-filtered multicast addresses DSA ports are stacked devices, so they use dev_mc_add() to sync their address list to their lower interface (DSA master). But they are also hardware devices, so they program those addresses to hardware using the __dev_mc_add() sync and unsync callbacks. Unfortunately both cannot work at the same time, and it seems that the multicast addresses which are already present on the DSA master, like 33:33:00:00:00:01 (added by addrconf.c as in6addr_linklocal_allnodes) are synced to the master via dev_mc_sync(), but not to hardware by __dev_mc_sync(). This happens because both the dev_mc_sync() -> __hw_addr_sync_one() code path, as well as __dev_mc_sync() -> __hw_addr_sync_dev(), operate on the same variable: ha->sync_cnt, in a way that causes the "sync" method (dsa_slave_sync_mc) to no longer be called. To fix the issue we need to work with the API in the way in which it was intended to be used, and therefore, call dev_uc_add() and friends for each individual hardware address, from the sync and unsync callbacks. Fixes: 5e8a1e03aa4d ("net: dsa: install secondary unicast and multicast addresses as host FDB/MDB") Link: https://lore.kernel.org/netdev/20220321163213.lrn5sk7m6grighbl@skbuf/ Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220322003701.2056895-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-22 00:37:01 +00:00
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dev_uc_add(conduit, addr);
net: dsa: fix missing host-filtered multicast addresses DSA ports are stacked devices, so they use dev_mc_add() to sync their address list to their lower interface (DSA master). But they are also hardware devices, so they program those addresses to hardware using the __dev_mc_add() sync and unsync callbacks. Unfortunately both cannot work at the same time, and it seems that the multicast addresses which are already present on the DSA master, like 33:33:00:00:00:01 (added by addrconf.c as in6addr_linklocal_allnodes) are synced to the master via dev_mc_sync(), but not to hardware by __dev_mc_sync(). This happens because both the dev_mc_sync() -> __hw_addr_sync_one() code path, as well as __dev_mc_sync() -> __hw_addr_sync_dev(), operate on the same variable: ha->sync_cnt, in a way that causes the "sync" method (dsa_slave_sync_mc) to no longer be called. To fix the issue we need to work with the API in the way in which it was intended to be used, and therefore, call dev_uc_add() and friends for each individual hardware address, from the sync and unsync callbacks. Fixes: 5e8a1e03aa4d ("net: dsa: install secondary unicast and multicast addresses as host FDB/MDB") Link: https://lore.kernel.org/netdev/20220321163213.lrn5sk7m6grighbl@skbuf/ Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220322003701.2056895-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-22 00:37:01 +00:00
if (!dsa_switch_supports_uc_filtering(dp->ds))
return 0;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
return dsa_user_vlan_for_each(dev, dsa_user_host_vlan_rx_filtering,
net: dsa: reindent arguments of dsa_user_vlan_for_each() These got misaligned after commit 6ca80638b90c ("net: dsa: Use conduit and user terms"). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-02 16:20:41 +00:00
&ctx);
net: dsa: install secondary unicast and multicast addresses as host FDB/MDB In preparation of disabling flooding towards the CPU in standalone ports mode, identify the addresses requested by upper interfaces and use the new API for DSA FDB isolation to request the hardware driver to offload these as FDB or MDB objects. The objects belong to the user port's database, and are installed pointing towards the CPU port. Because dev_uc_add()/dev_mc_add() is VLAN-unaware, we offload to the port standalone database addresses with VID 0 (also VLAN-unaware). So this excludes switches with global VLAN filtering from supporting unicast filtering, because there, it is possible for a port of a switch to join a VLAN-aware bridge, and this changes the VLAN awareness of standalone ports, requiring VLAN-aware standalone host FDB entries. For the same reason, hellcreek, which requires VLAN awareness in standalone mode, is also exempted from unicast filtering. We create "standalone" variants of dsa_port_host_fdb_add() and dsa_port_host_mdb_add() (and the _del coresponding functions). We also create a separate work item type for handling deferred standalone host FDB/MDB entries compared to the switchdev one. This is done for the purpose of clarity - the procedure for offloading a bridge FDB entry is different than offloading a standalone one, and the switchdev event work handles only FDBs anyway, not MDBs. Deferral is needed for standalone entries because ndo_set_rx_mode runs in atomic context. We could probably optimize things a little by first queuing up all entries that need to be offloaded, and scheduling the work item just once, but the data structures that we can pass through __dev_uc_sync() and __dev_mc_sync() are limiting (there is nothing like a void *priv), so we'd have to keep the list of queued events somewhere in struct dsa_switch, and possibly a lock for it. Too complicated for now. Adding the address to the master is handled by dev_uc_sync(), adding it to the hardware is handled by __dev_uc_sync(). So this is the reason why dsa_port_standalone_host_fdb_add() does not call dev_uc_add(). Not that it had the rtnl_mutex anyway - ndo_set_rx_mode has it, but is atomic. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 19:14:10 +00:00
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_unsync_uc(struct net_device *dev,
const unsigned char *addr)
net: dsa: install secondary unicast and multicast addresses as host FDB/MDB In preparation of disabling flooding towards the CPU in standalone ports mode, identify the addresses requested by upper interfaces and use the new API for DSA FDB isolation to request the hardware driver to offload these as FDB or MDB objects. The objects belong to the user port's database, and are installed pointing towards the CPU port. Because dev_uc_add()/dev_mc_add() is VLAN-unaware, we offload to the port standalone database addresses with VID 0 (also VLAN-unaware). So this excludes switches with global VLAN filtering from supporting unicast filtering, because there, it is possible for a port of a switch to join a VLAN-aware bridge, and this changes the VLAN awareness of standalone ports, requiring VLAN-aware standalone host FDB entries. For the same reason, hellcreek, which requires VLAN awareness in standalone mode, is also exempted from unicast filtering. We create "standalone" variants of dsa_port_host_fdb_add() and dsa_port_host_mdb_add() (and the _del coresponding functions). We also create a separate work item type for handling deferred standalone host FDB/MDB entries compared to the switchdev one. This is done for the purpose of clarity - the procedure for offloading a bridge FDB entry is different than offloading a standalone one, and the switchdev event work handles only FDBs anyway, not MDBs. Deferral is needed for standalone entries because ndo_set_rx_mode runs in atomic context. We could probably optimize things a little by first queuing up all entries that need to be offloaded, and scheduling the work item just once, but the data structures that we can pass through __dev_uc_sync() and __dev_mc_sync() are limiting (there is nothing like a void *priv), so we'd have to keep the list of queued events somewhere in struct dsa_switch, and possibly a lock for it. Too complicated for now. Adding the address to the master is handled by dev_uc_sync(), adding it to the hardware is handled by __dev_uc_sync(). So this is the reason why dsa_port_standalone_host_fdb_add() does not call dev_uc_add(). Not that it had the rtnl_mutex anyway - ndo_set_rx_mode has it, but is atomic. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 19:14:10 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct net_device *conduit = dsa_user_to_conduit(dev);
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: sync unicast and multicast addresses for VLAN filters too If certain conditions are met, DSA can install all necessary MAC addresses on the CPU ports as FDB entries and disable flooding towards the CPU (we call this RX filtering). There is one corner case where this does not work. ip link add br0 type bridge vlan_filtering 1 && ip link set br0 up ip link set swp0 master br0 && ip link set swp0 up ip link add link swp0 name swp0.100 type vlan id 100 ip link set swp0.100 up && ip addr add 192.168.100.1/24 dev swp0.100 Traffic through swp0.100 is broken, because the bridge turns on VLAN filtering in the swp0 port (causing RX packets to be classified to the FDB database corresponding to the VID from their 802.1Q header), and although the 8021q module does call dev_uc_add() towards the real device, that API is VLAN-unaware, so it only contains the MAC address, not the VID; and DSA's current implementation of ndo_set_rx_mode() is only for VID 0 (corresponding to FDB entries which are installed in an FDB database which is only hit when the port is VLAN-unaware). It's interesting to understand why the bridge does not turn on IFF_PROMISC for its swp0 bridge port, and it may appear at first glance that this is a regression caused by the logic in commit 2796d0c648c9 ("bridge: Automatically manage port promiscuous mode."). After all, a bridge port needs to have IFF_PROMISC by its very nature - it needs to receive and forward frames with a MAC DA different from the bridge ports' MAC addresses. While that may be true, when the bridge is VLAN-aware *and* it has a single port, there is no real reason to enable promiscuity even if that is an automatic port, with flooding and learning (there is nowhere for packets to go except to the BR_FDB_LOCAL entries), and this is how the corner case appears. Adding a second automatic interface to the bridge would make swp0 promisc as well, and would mask the corner case. Given the dev_uc_add() / ndo_set_rx_mode() API is what it is (it doesn't pass a VLAN ID), the only way to address that problem is to install host FDB entries for the cartesian product of RX filtering MAC addresses and VLAN RX filters. Fixes: 7569459a52c9 ("net: dsa: manage flooding on the CPU ports") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230329151821.745752-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-29 15:18:21 +00:00
struct dsa_host_vlan_rx_filtering_ctx ctx = {
.dev = dev,
.addr = addr,
.event = DSA_UC_DEL,
};
net: dsa: fix missing host-filtered multicast addresses DSA ports are stacked devices, so they use dev_mc_add() to sync their address list to their lower interface (DSA master). But they are also hardware devices, so they program those addresses to hardware using the __dev_mc_add() sync and unsync callbacks. Unfortunately both cannot work at the same time, and it seems that the multicast addresses which are already present on the DSA master, like 33:33:00:00:00:01 (added by addrconf.c as in6addr_linklocal_allnodes) are synced to the master via dev_mc_sync(), but not to hardware by __dev_mc_sync(). This happens because both the dev_mc_sync() -> __hw_addr_sync_one() code path, as well as __dev_mc_sync() -> __hw_addr_sync_dev(), operate on the same variable: ha->sync_cnt, in a way that causes the "sync" method (dsa_slave_sync_mc) to no longer be called. To fix the issue we need to work with the API in the way in which it was intended to be used, and therefore, call dev_uc_add() and friends for each individual hardware address, from the sync and unsync callbacks. Fixes: 5e8a1e03aa4d ("net: dsa: install secondary unicast and multicast addresses as host FDB/MDB") Link: https://lore.kernel.org/netdev/20220321163213.lrn5sk7m6grighbl@skbuf/ Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220322003701.2056895-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-22 00:37:01 +00:00
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dev_uc_del(conduit, addr);
net: dsa: fix missing host-filtered multicast addresses DSA ports are stacked devices, so they use dev_mc_add() to sync their address list to their lower interface (DSA master). But they are also hardware devices, so they program those addresses to hardware using the __dev_mc_add() sync and unsync callbacks. Unfortunately both cannot work at the same time, and it seems that the multicast addresses which are already present on the DSA master, like 33:33:00:00:00:01 (added by addrconf.c as in6addr_linklocal_allnodes) are synced to the master via dev_mc_sync(), but not to hardware by __dev_mc_sync(). This happens because both the dev_mc_sync() -> __hw_addr_sync_one() code path, as well as __dev_mc_sync() -> __hw_addr_sync_dev(), operate on the same variable: ha->sync_cnt, in a way that causes the "sync" method (dsa_slave_sync_mc) to no longer be called. To fix the issue we need to work with the API in the way in which it was intended to be used, and therefore, call dev_uc_add() and friends for each individual hardware address, from the sync and unsync callbacks. Fixes: 5e8a1e03aa4d ("net: dsa: install secondary unicast and multicast addresses as host FDB/MDB") Link: https://lore.kernel.org/netdev/20220321163213.lrn5sk7m6grighbl@skbuf/ Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220322003701.2056895-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-22 00:37:01 +00:00
if (!dsa_switch_supports_uc_filtering(dp->ds))
return 0;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
return dsa_user_vlan_for_each(dev, dsa_user_host_vlan_rx_filtering,
net: dsa: reindent arguments of dsa_user_vlan_for_each() These got misaligned after commit 6ca80638b90c ("net: dsa: Use conduit and user terms"). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-02 16:20:41 +00:00
&ctx);
net: dsa: install secondary unicast and multicast addresses as host FDB/MDB In preparation of disabling flooding towards the CPU in standalone ports mode, identify the addresses requested by upper interfaces and use the new API for DSA FDB isolation to request the hardware driver to offload these as FDB or MDB objects. The objects belong to the user port's database, and are installed pointing towards the CPU port. Because dev_uc_add()/dev_mc_add() is VLAN-unaware, we offload to the port standalone database addresses with VID 0 (also VLAN-unaware). So this excludes switches with global VLAN filtering from supporting unicast filtering, because there, it is possible for a port of a switch to join a VLAN-aware bridge, and this changes the VLAN awareness of standalone ports, requiring VLAN-aware standalone host FDB entries. For the same reason, hellcreek, which requires VLAN awareness in standalone mode, is also exempted from unicast filtering. We create "standalone" variants of dsa_port_host_fdb_add() and dsa_port_host_mdb_add() (and the _del coresponding functions). We also create a separate work item type for handling deferred standalone host FDB/MDB entries compared to the switchdev one. This is done for the purpose of clarity - the procedure for offloading a bridge FDB entry is different than offloading a standalone one, and the switchdev event work handles only FDBs anyway, not MDBs. Deferral is needed for standalone entries because ndo_set_rx_mode runs in atomic context. We could probably optimize things a little by first queuing up all entries that need to be offloaded, and scheduling the work item just once, but the data structures that we can pass through __dev_uc_sync() and __dev_mc_sync() are limiting (there is nothing like a void *priv), so we'd have to keep the list of queued events somewhere in struct dsa_switch, and possibly a lock for it. Too complicated for now. Adding the address to the master is handled by dev_uc_sync(), adding it to the hardware is handled by __dev_uc_sync(). So this is the reason why dsa_port_standalone_host_fdb_add() does not call dev_uc_add(). Not that it had the rtnl_mutex anyway - ndo_set_rx_mode has it, but is atomic. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 19:14:10 +00:00
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_sync_mc(struct net_device *dev,
const unsigned char *addr)
net: dsa: install secondary unicast and multicast addresses as host FDB/MDB In preparation of disabling flooding towards the CPU in standalone ports mode, identify the addresses requested by upper interfaces and use the new API for DSA FDB isolation to request the hardware driver to offload these as FDB or MDB objects. The objects belong to the user port's database, and are installed pointing towards the CPU port. Because dev_uc_add()/dev_mc_add() is VLAN-unaware, we offload to the port standalone database addresses with VID 0 (also VLAN-unaware). So this excludes switches with global VLAN filtering from supporting unicast filtering, because there, it is possible for a port of a switch to join a VLAN-aware bridge, and this changes the VLAN awareness of standalone ports, requiring VLAN-aware standalone host FDB entries. For the same reason, hellcreek, which requires VLAN awareness in standalone mode, is also exempted from unicast filtering. We create "standalone" variants of dsa_port_host_fdb_add() and dsa_port_host_mdb_add() (and the _del coresponding functions). We also create a separate work item type for handling deferred standalone host FDB/MDB entries compared to the switchdev one. This is done for the purpose of clarity - the procedure for offloading a bridge FDB entry is different than offloading a standalone one, and the switchdev event work handles only FDBs anyway, not MDBs. Deferral is needed for standalone entries because ndo_set_rx_mode runs in atomic context. We could probably optimize things a little by first queuing up all entries that need to be offloaded, and scheduling the work item just once, but the data structures that we can pass through __dev_uc_sync() and __dev_mc_sync() are limiting (there is nothing like a void *priv), so we'd have to keep the list of queued events somewhere in struct dsa_switch, and possibly a lock for it. Too complicated for now. Adding the address to the master is handled by dev_uc_sync(), adding it to the hardware is handled by __dev_uc_sync(). So this is the reason why dsa_port_standalone_host_fdb_add() does not call dev_uc_add(). Not that it had the rtnl_mutex anyway - ndo_set_rx_mode has it, but is atomic. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 19:14:10 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct net_device *conduit = dsa_user_to_conduit(dev);
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: sync unicast and multicast addresses for VLAN filters too If certain conditions are met, DSA can install all necessary MAC addresses on the CPU ports as FDB entries and disable flooding towards the CPU (we call this RX filtering). There is one corner case where this does not work. ip link add br0 type bridge vlan_filtering 1 && ip link set br0 up ip link set swp0 master br0 && ip link set swp0 up ip link add link swp0 name swp0.100 type vlan id 100 ip link set swp0.100 up && ip addr add 192.168.100.1/24 dev swp0.100 Traffic through swp0.100 is broken, because the bridge turns on VLAN filtering in the swp0 port (causing RX packets to be classified to the FDB database corresponding to the VID from their 802.1Q header), and although the 8021q module does call dev_uc_add() towards the real device, that API is VLAN-unaware, so it only contains the MAC address, not the VID; and DSA's current implementation of ndo_set_rx_mode() is only for VID 0 (corresponding to FDB entries which are installed in an FDB database which is only hit when the port is VLAN-unaware). It's interesting to understand why the bridge does not turn on IFF_PROMISC for its swp0 bridge port, and it may appear at first glance that this is a regression caused by the logic in commit 2796d0c648c9 ("bridge: Automatically manage port promiscuous mode."). After all, a bridge port needs to have IFF_PROMISC by its very nature - it needs to receive and forward frames with a MAC DA different from the bridge ports' MAC addresses. While that may be true, when the bridge is VLAN-aware *and* it has a single port, there is no real reason to enable promiscuity even if that is an automatic port, with flooding and learning (there is nowhere for packets to go except to the BR_FDB_LOCAL entries), and this is how the corner case appears. Adding a second automatic interface to the bridge would make swp0 promisc as well, and would mask the corner case. Given the dev_uc_add() / ndo_set_rx_mode() API is what it is (it doesn't pass a VLAN ID), the only way to address that problem is to install host FDB entries for the cartesian product of RX filtering MAC addresses and VLAN RX filters. Fixes: 7569459a52c9 ("net: dsa: manage flooding on the CPU ports") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230329151821.745752-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-29 15:18:21 +00:00
struct dsa_host_vlan_rx_filtering_ctx ctx = {
.dev = dev,
.addr = addr,
.event = DSA_MC_ADD,
};
net: dsa: fix missing host-filtered multicast addresses DSA ports are stacked devices, so they use dev_mc_add() to sync their address list to their lower interface (DSA master). But they are also hardware devices, so they program those addresses to hardware using the __dev_mc_add() sync and unsync callbacks. Unfortunately both cannot work at the same time, and it seems that the multicast addresses which are already present on the DSA master, like 33:33:00:00:00:01 (added by addrconf.c as in6addr_linklocal_allnodes) are synced to the master via dev_mc_sync(), but not to hardware by __dev_mc_sync(). This happens because both the dev_mc_sync() -> __hw_addr_sync_one() code path, as well as __dev_mc_sync() -> __hw_addr_sync_dev(), operate on the same variable: ha->sync_cnt, in a way that causes the "sync" method (dsa_slave_sync_mc) to no longer be called. To fix the issue we need to work with the API in the way in which it was intended to be used, and therefore, call dev_uc_add() and friends for each individual hardware address, from the sync and unsync callbacks. Fixes: 5e8a1e03aa4d ("net: dsa: install secondary unicast and multicast addresses as host FDB/MDB") Link: https://lore.kernel.org/netdev/20220321163213.lrn5sk7m6grighbl@skbuf/ Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220322003701.2056895-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-22 00:37:01 +00:00
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dev_mc_add(conduit, addr);
net: dsa: fix missing host-filtered multicast addresses DSA ports are stacked devices, so they use dev_mc_add() to sync their address list to their lower interface (DSA master). But they are also hardware devices, so they program those addresses to hardware using the __dev_mc_add() sync and unsync callbacks. Unfortunately both cannot work at the same time, and it seems that the multicast addresses which are already present on the DSA master, like 33:33:00:00:00:01 (added by addrconf.c as in6addr_linklocal_allnodes) are synced to the master via dev_mc_sync(), but not to hardware by __dev_mc_sync(). This happens because both the dev_mc_sync() -> __hw_addr_sync_one() code path, as well as __dev_mc_sync() -> __hw_addr_sync_dev(), operate on the same variable: ha->sync_cnt, in a way that causes the "sync" method (dsa_slave_sync_mc) to no longer be called. To fix the issue we need to work with the API in the way in which it was intended to be used, and therefore, call dev_uc_add() and friends for each individual hardware address, from the sync and unsync callbacks. Fixes: 5e8a1e03aa4d ("net: dsa: install secondary unicast and multicast addresses as host FDB/MDB") Link: https://lore.kernel.org/netdev/20220321163213.lrn5sk7m6grighbl@skbuf/ Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220322003701.2056895-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-22 00:37:01 +00:00
if (!dsa_switch_supports_mc_filtering(dp->ds))
return 0;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
return dsa_user_vlan_for_each(dev, dsa_user_host_vlan_rx_filtering,
net: dsa: reindent arguments of dsa_user_vlan_for_each() These got misaligned after commit 6ca80638b90c ("net: dsa: Use conduit and user terms"). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-02 16:20:41 +00:00
&ctx);
net: dsa: install secondary unicast and multicast addresses as host FDB/MDB In preparation of disabling flooding towards the CPU in standalone ports mode, identify the addresses requested by upper interfaces and use the new API for DSA FDB isolation to request the hardware driver to offload these as FDB or MDB objects. The objects belong to the user port's database, and are installed pointing towards the CPU port. Because dev_uc_add()/dev_mc_add() is VLAN-unaware, we offload to the port standalone database addresses with VID 0 (also VLAN-unaware). So this excludes switches with global VLAN filtering from supporting unicast filtering, because there, it is possible for a port of a switch to join a VLAN-aware bridge, and this changes the VLAN awareness of standalone ports, requiring VLAN-aware standalone host FDB entries. For the same reason, hellcreek, which requires VLAN awareness in standalone mode, is also exempted from unicast filtering. We create "standalone" variants of dsa_port_host_fdb_add() and dsa_port_host_mdb_add() (and the _del coresponding functions). We also create a separate work item type for handling deferred standalone host FDB/MDB entries compared to the switchdev one. This is done for the purpose of clarity - the procedure for offloading a bridge FDB entry is different than offloading a standalone one, and the switchdev event work handles only FDBs anyway, not MDBs. Deferral is needed for standalone entries because ndo_set_rx_mode runs in atomic context. We could probably optimize things a little by first queuing up all entries that need to be offloaded, and scheduling the work item just once, but the data structures that we can pass through __dev_uc_sync() and __dev_mc_sync() are limiting (there is nothing like a void *priv), so we'd have to keep the list of queued events somewhere in struct dsa_switch, and possibly a lock for it. Too complicated for now. Adding the address to the master is handled by dev_uc_sync(), adding it to the hardware is handled by __dev_uc_sync(). So this is the reason why dsa_port_standalone_host_fdb_add() does not call dev_uc_add(). Not that it had the rtnl_mutex anyway - ndo_set_rx_mode has it, but is atomic. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 19:14:10 +00:00
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_unsync_mc(struct net_device *dev,
const unsigned char *addr)
net: dsa: install secondary unicast and multicast addresses as host FDB/MDB In preparation of disabling flooding towards the CPU in standalone ports mode, identify the addresses requested by upper interfaces and use the new API for DSA FDB isolation to request the hardware driver to offload these as FDB or MDB objects. The objects belong to the user port's database, and are installed pointing towards the CPU port. Because dev_uc_add()/dev_mc_add() is VLAN-unaware, we offload to the port standalone database addresses with VID 0 (also VLAN-unaware). So this excludes switches with global VLAN filtering from supporting unicast filtering, because there, it is possible for a port of a switch to join a VLAN-aware bridge, and this changes the VLAN awareness of standalone ports, requiring VLAN-aware standalone host FDB entries. For the same reason, hellcreek, which requires VLAN awareness in standalone mode, is also exempted from unicast filtering. We create "standalone" variants of dsa_port_host_fdb_add() and dsa_port_host_mdb_add() (and the _del coresponding functions). We also create a separate work item type for handling deferred standalone host FDB/MDB entries compared to the switchdev one. This is done for the purpose of clarity - the procedure for offloading a bridge FDB entry is different than offloading a standalone one, and the switchdev event work handles only FDBs anyway, not MDBs. Deferral is needed for standalone entries because ndo_set_rx_mode runs in atomic context. We could probably optimize things a little by first queuing up all entries that need to be offloaded, and scheduling the work item just once, but the data structures that we can pass through __dev_uc_sync() and __dev_mc_sync() are limiting (there is nothing like a void *priv), so we'd have to keep the list of queued events somewhere in struct dsa_switch, and possibly a lock for it. Too complicated for now. Adding the address to the master is handled by dev_uc_sync(), adding it to the hardware is handled by __dev_uc_sync(). So this is the reason why dsa_port_standalone_host_fdb_add() does not call dev_uc_add(). Not that it had the rtnl_mutex anyway - ndo_set_rx_mode has it, but is atomic. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 19:14:10 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct net_device *conduit = dsa_user_to_conduit(dev);
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: sync unicast and multicast addresses for VLAN filters too If certain conditions are met, DSA can install all necessary MAC addresses on the CPU ports as FDB entries and disable flooding towards the CPU (we call this RX filtering). There is one corner case where this does not work. ip link add br0 type bridge vlan_filtering 1 && ip link set br0 up ip link set swp0 master br0 && ip link set swp0 up ip link add link swp0 name swp0.100 type vlan id 100 ip link set swp0.100 up && ip addr add 192.168.100.1/24 dev swp0.100 Traffic through swp0.100 is broken, because the bridge turns on VLAN filtering in the swp0 port (causing RX packets to be classified to the FDB database corresponding to the VID from their 802.1Q header), and although the 8021q module does call dev_uc_add() towards the real device, that API is VLAN-unaware, so it only contains the MAC address, not the VID; and DSA's current implementation of ndo_set_rx_mode() is only for VID 0 (corresponding to FDB entries which are installed in an FDB database which is only hit when the port is VLAN-unaware). It's interesting to understand why the bridge does not turn on IFF_PROMISC for its swp0 bridge port, and it may appear at first glance that this is a regression caused by the logic in commit 2796d0c648c9 ("bridge: Automatically manage port promiscuous mode."). After all, a bridge port needs to have IFF_PROMISC by its very nature - it needs to receive and forward frames with a MAC DA different from the bridge ports' MAC addresses. While that may be true, when the bridge is VLAN-aware *and* it has a single port, there is no real reason to enable promiscuity even if that is an automatic port, with flooding and learning (there is nowhere for packets to go except to the BR_FDB_LOCAL entries), and this is how the corner case appears. Adding a second automatic interface to the bridge would make swp0 promisc as well, and would mask the corner case. Given the dev_uc_add() / ndo_set_rx_mode() API is what it is (it doesn't pass a VLAN ID), the only way to address that problem is to install host FDB entries for the cartesian product of RX filtering MAC addresses and VLAN RX filters. Fixes: 7569459a52c9 ("net: dsa: manage flooding on the CPU ports") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230329151821.745752-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-29 15:18:21 +00:00
struct dsa_host_vlan_rx_filtering_ctx ctx = {
.dev = dev,
.addr = addr,
.event = DSA_MC_DEL,
};
net: dsa: fix missing host-filtered multicast addresses DSA ports are stacked devices, so they use dev_mc_add() to sync their address list to their lower interface (DSA master). But they are also hardware devices, so they program those addresses to hardware using the __dev_mc_add() sync and unsync callbacks. Unfortunately both cannot work at the same time, and it seems that the multicast addresses which are already present on the DSA master, like 33:33:00:00:00:01 (added by addrconf.c as in6addr_linklocal_allnodes) are synced to the master via dev_mc_sync(), but not to hardware by __dev_mc_sync(). This happens because both the dev_mc_sync() -> __hw_addr_sync_one() code path, as well as __dev_mc_sync() -> __hw_addr_sync_dev(), operate on the same variable: ha->sync_cnt, in a way that causes the "sync" method (dsa_slave_sync_mc) to no longer be called. To fix the issue we need to work with the API in the way in which it was intended to be used, and therefore, call dev_uc_add() and friends for each individual hardware address, from the sync and unsync callbacks. Fixes: 5e8a1e03aa4d ("net: dsa: install secondary unicast and multicast addresses as host FDB/MDB") Link: https://lore.kernel.org/netdev/20220321163213.lrn5sk7m6grighbl@skbuf/ Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220322003701.2056895-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-22 00:37:01 +00:00
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dev_mc_del(conduit, addr);
net: dsa: fix missing host-filtered multicast addresses DSA ports are stacked devices, so they use dev_mc_add() to sync their address list to their lower interface (DSA master). But they are also hardware devices, so they program those addresses to hardware using the __dev_mc_add() sync and unsync callbacks. Unfortunately both cannot work at the same time, and it seems that the multicast addresses which are already present on the DSA master, like 33:33:00:00:00:01 (added by addrconf.c as in6addr_linklocal_allnodes) are synced to the master via dev_mc_sync(), but not to hardware by __dev_mc_sync(). This happens because both the dev_mc_sync() -> __hw_addr_sync_one() code path, as well as __dev_mc_sync() -> __hw_addr_sync_dev(), operate on the same variable: ha->sync_cnt, in a way that causes the "sync" method (dsa_slave_sync_mc) to no longer be called. To fix the issue we need to work with the API in the way in which it was intended to be used, and therefore, call dev_uc_add() and friends for each individual hardware address, from the sync and unsync callbacks. Fixes: 5e8a1e03aa4d ("net: dsa: install secondary unicast and multicast addresses as host FDB/MDB") Link: https://lore.kernel.org/netdev/20220321163213.lrn5sk7m6grighbl@skbuf/ Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220322003701.2056895-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-22 00:37:01 +00:00
if (!dsa_switch_supports_mc_filtering(dp->ds))
return 0;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
return dsa_user_vlan_for_each(dev, dsa_user_host_vlan_rx_filtering,
net: dsa: reindent arguments of dsa_user_vlan_for_each() These got misaligned after commit 6ca80638b90c ("net: dsa: Use conduit and user terms"). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-02 16:20:41 +00:00
&ctx);
net: dsa: install secondary unicast and multicast addresses as host FDB/MDB In preparation of disabling flooding towards the CPU in standalone ports mode, identify the addresses requested by upper interfaces and use the new API for DSA FDB isolation to request the hardware driver to offload these as FDB or MDB objects. The objects belong to the user port's database, and are installed pointing towards the CPU port. Because dev_uc_add()/dev_mc_add() is VLAN-unaware, we offload to the port standalone database addresses with VID 0 (also VLAN-unaware). So this excludes switches with global VLAN filtering from supporting unicast filtering, because there, it is possible for a port of a switch to join a VLAN-aware bridge, and this changes the VLAN awareness of standalone ports, requiring VLAN-aware standalone host FDB entries. For the same reason, hellcreek, which requires VLAN awareness in standalone mode, is also exempted from unicast filtering. We create "standalone" variants of dsa_port_host_fdb_add() and dsa_port_host_mdb_add() (and the _del coresponding functions). We also create a separate work item type for handling deferred standalone host FDB/MDB entries compared to the switchdev one. This is done for the purpose of clarity - the procedure for offloading a bridge FDB entry is different than offloading a standalone one, and the switchdev event work handles only FDBs anyway, not MDBs. Deferral is needed for standalone entries because ndo_set_rx_mode runs in atomic context. We could probably optimize things a little by first queuing up all entries that need to be offloaded, and scheduling the work item just once, but the data structures that we can pass through __dev_uc_sync() and __dev_mc_sync() are limiting (there is nothing like a void *priv), so we'd have to keep the list of queued events somewhere in struct dsa_switch, and possibly a lock for it. Too complicated for now. Adding the address to the master is handled by dev_uc_sync(), adding it to the hardware is handled by __dev_uc_sync(). So this is the reason why dsa_port_standalone_host_fdb_add() does not call dev_uc_add(). Not that it had the rtnl_mutex anyway - ndo_set_rx_mode has it, but is atomic. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 19:14:10 +00:00
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
void dsa_user_sync_ha(struct net_device *dev)
net: dsa: allow the DSA master to be seen and changed through rtnetlink Some DSA switches have multiple CPU ports, which can be used to improve CPU termination throughput, but DSA, through dsa_tree_setup_cpu_ports(), sets up only the first one, leading to suboptimal use of hardware. The desire is to not change the default configuration but to permit the user to create a dynamic mapping between individual user ports and the CPU port that they are served by, configurable through rtnetlink. It is also intended to permit load balancing between CPU ports, and in that case, the foreseen model is for the DSA master to be a bonding interface whose lowers are the physical DSA masters. To that end, we create a struct rtnl_link_ops for DSA user ports with the "dsa" kind. We expose the IFLA_DSA_MASTER link attribute that contains the ifindex of the newly desired DSA master. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:06:59 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: allow the DSA master to be seen and changed through rtnetlink Some DSA switches have multiple CPU ports, which can be used to improve CPU termination throughput, but DSA, through dsa_tree_setup_cpu_ports(), sets up only the first one, leading to suboptimal use of hardware. The desire is to not change the default configuration but to permit the user to create a dynamic mapping between individual user ports and the CPU port that they are served by, configurable through rtnetlink. It is also intended to permit load balancing between CPU ports, and in that case, the foreseen model is for the DSA master to be a bonding interface whose lowers are the physical DSA masters. To that end, we create a struct rtnl_link_ops for DSA user ports with the "dsa" kind. We expose the IFLA_DSA_MASTER link attribute that contains the ifindex of the newly desired DSA master. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:06:59 +00:00
struct dsa_switch *ds = dp->ds;
struct netdev_hw_addr *ha;
netif_addr_lock_bh(dev);
netdev_for_each_synced_mc_addr(ha, dev)
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dsa_user_sync_mc(dev, ha->addr);
net: dsa: allow the DSA master to be seen and changed through rtnetlink Some DSA switches have multiple CPU ports, which can be used to improve CPU termination throughput, but DSA, through dsa_tree_setup_cpu_ports(), sets up only the first one, leading to suboptimal use of hardware. The desire is to not change the default configuration but to permit the user to create a dynamic mapping between individual user ports and the CPU port that they are served by, configurable through rtnetlink. It is also intended to permit load balancing between CPU ports, and in that case, the foreseen model is for the DSA master to be a bonding interface whose lowers are the physical DSA masters. To that end, we create a struct rtnl_link_ops for DSA user ports with the "dsa" kind. We expose the IFLA_DSA_MASTER link attribute that contains the ifindex of the newly desired DSA master. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:06:59 +00:00
netdev_for_each_synced_uc_addr(ha, dev)
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dsa_user_sync_uc(dev, ha->addr);
net: dsa: allow the DSA master to be seen and changed through rtnetlink Some DSA switches have multiple CPU ports, which can be used to improve CPU termination throughput, but DSA, through dsa_tree_setup_cpu_ports(), sets up only the first one, leading to suboptimal use of hardware. The desire is to not change the default configuration but to permit the user to create a dynamic mapping between individual user ports and the CPU port that they are served by, configurable through rtnetlink. It is also intended to permit load balancing between CPU ports, and in that case, the foreseen model is for the DSA master to be a bonding interface whose lowers are the physical DSA masters. To that end, we create a struct rtnl_link_ops for DSA user ports with the "dsa" kind. We expose the IFLA_DSA_MASTER link attribute that contains the ifindex of the newly desired DSA master. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:06:59 +00:00
netif_addr_unlock_bh(dev);
if (dsa_switch_supports_uc_filtering(ds) ||
dsa_switch_supports_mc_filtering(ds))
dsa_flush_workqueue();
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
void dsa_user_unsync_ha(struct net_device *dev)
net: dsa: allow the DSA master to be seen and changed through rtnetlink Some DSA switches have multiple CPU ports, which can be used to improve CPU termination throughput, but DSA, through dsa_tree_setup_cpu_ports(), sets up only the first one, leading to suboptimal use of hardware. The desire is to not change the default configuration but to permit the user to create a dynamic mapping between individual user ports and the CPU port that they are served by, configurable through rtnetlink. It is also intended to permit load balancing between CPU ports, and in that case, the foreseen model is for the DSA master to be a bonding interface whose lowers are the physical DSA masters. To that end, we create a struct rtnl_link_ops for DSA user ports with the "dsa" kind. We expose the IFLA_DSA_MASTER link attribute that contains the ifindex of the newly desired DSA master. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:06:59 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: allow the DSA master to be seen and changed through rtnetlink Some DSA switches have multiple CPU ports, which can be used to improve CPU termination throughput, but DSA, through dsa_tree_setup_cpu_ports(), sets up only the first one, leading to suboptimal use of hardware. The desire is to not change the default configuration but to permit the user to create a dynamic mapping between individual user ports and the CPU port that they are served by, configurable through rtnetlink. It is also intended to permit load balancing between CPU ports, and in that case, the foreseen model is for the DSA master to be a bonding interface whose lowers are the physical DSA masters. To that end, we create a struct rtnl_link_ops for DSA user ports with the "dsa" kind. We expose the IFLA_DSA_MASTER link attribute that contains the ifindex of the newly desired DSA master. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:06:59 +00:00
struct dsa_switch *ds = dp->ds;
struct netdev_hw_addr *ha;
netif_addr_lock_bh(dev);
netdev_for_each_synced_uc_addr(ha, dev)
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dsa_user_unsync_uc(dev, ha->addr);
net: dsa: allow the DSA master to be seen and changed through rtnetlink Some DSA switches have multiple CPU ports, which can be used to improve CPU termination throughput, but DSA, through dsa_tree_setup_cpu_ports(), sets up only the first one, leading to suboptimal use of hardware. The desire is to not change the default configuration but to permit the user to create a dynamic mapping between individual user ports and the CPU port that they are served by, configurable through rtnetlink. It is also intended to permit load balancing between CPU ports, and in that case, the foreseen model is for the DSA master to be a bonding interface whose lowers are the physical DSA masters. To that end, we create a struct rtnl_link_ops for DSA user ports with the "dsa" kind. We expose the IFLA_DSA_MASTER link attribute that contains the ifindex of the newly desired DSA master. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:06:59 +00:00
netdev_for_each_synced_mc_addr(ha, dev)
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dsa_user_unsync_mc(dev, ha->addr);
net: dsa: allow the DSA master to be seen and changed through rtnetlink Some DSA switches have multiple CPU ports, which can be used to improve CPU termination throughput, but DSA, through dsa_tree_setup_cpu_ports(), sets up only the first one, leading to suboptimal use of hardware. The desire is to not change the default configuration but to permit the user to create a dynamic mapping between individual user ports and the CPU port that they are served by, configurable through rtnetlink. It is also intended to permit load balancing between CPU ports, and in that case, the foreseen model is for the DSA master to be a bonding interface whose lowers are the physical DSA masters. To that end, we create a struct rtnl_link_ops for DSA user ports with the "dsa" kind. We expose the IFLA_DSA_MASTER link attribute that contains the ifindex of the newly desired DSA master. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:06:59 +00:00
netif_addr_unlock_bh(dev);
if (dsa_switch_supports_uc_filtering(ds) ||
dsa_switch_supports_mc_filtering(ds))
dsa_flush_workqueue();
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
/* user mii_bus handling ***************************************************/
static int dsa_user_phy_read(struct mii_bus *bus, int addr, int reg)
net: Distributed Switch Architecture protocol support Distributed Switch Architecture is a protocol for managing hardware switch chips. It consists of a set of MII management registers and commands to configure the switch, and an ethernet header format to signal which of the ports of the switch a packet was received from or is intended to be sent to. The switches that this driver supports are typically embedded in access points and routers, and a typical setup with a DSA switch looks something like this: +-----------+ +-----------+ | | RGMII | | | +-------+ +------ 1000baseT MDI ("WAN") | | | 6-port +------ 1000baseT MDI ("LAN1") | CPU | | ethernet +------ 1000baseT MDI ("LAN2") | |MIImgmt| switch +------ 1000baseT MDI ("LAN3") | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4") | | | | +-----------+ +-----------+ The switch driver presents each port on the switch as a separate network interface to Linux, polls the switch to maintain software link state of those ports, forwards MII management interface accesses to those network interfaces (e.g. as done by ethtool) to the switch, and exposes the switch's hardware statistics counters via the appropriate Linux kernel interfaces. This initial patch supports the MII management interface register layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and supports the "Ethertype DSA" packet tagging format. (There is no officially registered ethertype for the Ethertype DSA packet format, so we just grab a random one. The ethertype to use is programmed into the switch, and the switch driver uses the value of ETH_P_EDSA for this, so this define can be changed at any time in the future if the one we chose is allocated to another protocol or if Ethertype DSA gets its own officially registered ethertype, and everything will continue to work.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 13:44:02 +00:00
{
struct dsa_switch *ds = bus->priv;
net: dsa: allow for more complex PHY setups Modify the DSA slave interface to be bound to an arbitray PHY, not just the ones that are available as child PHY devices of the switch MDIO bus. This allows us for instance to have external PHYs connected to a separate MDIO bus, but yet also connected to a given switch port. Under certain configurations, the physical port mask might not be a 1:1 mapping to the MII PHYs mask. This is the case, if e.g: Port 1 of the switch is used and connects to a PHY at a MDIO address different than 1. Introduce a phys_mii_mask variable which allows driver to implement and divert their own MDIO read/writes operations for a subset of the MDIO PHY addresses. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-28 00:04:51 +00:00
if (ds->phys_mii_mask & (1 << addr))
net: dsa: rename switch operations structure Now that the dsa_switch_driver structure contains only function pointers as it is supposed to, rename it to the more appropriate dsa_switch_ops, uniformly to any other operations structure in the kernel. No functional changes here, basically just the result of something like: s/dsa_switch_driver *drv/dsa_switch_ops *ops/g However keep the {un,}register_switch_driver functions and their dsa_switch_drivers list as is, since they represent the -- likely to be deprecated soon -- legacy DSA registration framework. In the meantime, also fix the following checks from checkpatch.pl to make it happy with this patch: CHECK: Comparison to NULL could be written "!ops" #403: FILE: net/dsa/dsa.c:470: + if (ops == NULL) { CHECK: Comparison to NULL could be written "ds->ops->get_strings" #773: FILE: net/dsa/slave.c:697: + if (ds->ops->get_strings != NULL) CHECK: Comparison to NULL could be written "ds->ops->get_ethtool_stats" #824: FILE: net/dsa/slave.c:785: + if (ds->ops->get_ethtool_stats != NULL) CHECK: Comparison to NULL could be written "ds->ops->get_sset_count" #835: FILE: net/dsa/slave.c:798: + if (ds->ops->get_sset_count != NULL) total: 0 errors, 0 warnings, 4 checks, 784 lines checked Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23 16:38:56 +00:00
return ds->ops->phy_read(ds, addr, reg);
net: Distributed Switch Architecture protocol support Distributed Switch Architecture is a protocol for managing hardware switch chips. It consists of a set of MII management registers and commands to configure the switch, and an ethernet header format to signal which of the ports of the switch a packet was received from or is intended to be sent to. The switches that this driver supports are typically embedded in access points and routers, and a typical setup with a DSA switch looks something like this: +-----------+ +-----------+ | | RGMII | | | +-------+ +------ 1000baseT MDI ("WAN") | | | 6-port +------ 1000baseT MDI ("LAN1") | CPU | | ethernet +------ 1000baseT MDI ("LAN2") | |MIImgmt| switch +------ 1000baseT MDI ("LAN3") | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4") | | | | +-----------+ +-----------+ The switch driver presents each port on the switch as a separate network interface to Linux, polls the switch to maintain software link state of those ports, forwards MII management interface accesses to those network interfaces (e.g. as done by ethtool) to the switch, and exposes the switch's hardware statistics counters via the appropriate Linux kernel interfaces. This initial patch supports the MII management interface register layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and supports the "Ethertype DSA" packet tagging format. (There is no officially registered ethertype for the Ethertype DSA packet format, so we just grab a random one. The ethertype to use is programmed into the switch, and the switch driver uses the value of ETH_P_EDSA for this, so this define can be changed at any time in the future if the one we chose is allocated to another protocol or if Ethertype DSA gets its own officially registered ethertype, and everything will continue to work.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 13:44:02 +00:00
return 0xffff;
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_phy_write(struct mii_bus *bus, int addr, int reg, u16 val)
net: Distributed Switch Architecture protocol support Distributed Switch Architecture is a protocol for managing hardware switch chips. It consists of a set of MII management registers and commands to configure the switch, and an ethernet header format to signal which of the ports of the switch a packet was received from or is intended to be sent to. The switches that this driver supports are typically embedded in access points and routers, and a typical setup with a DSA switch looks something like this: +-----------+ +-----------+ | | RGMII | | | +-------+ +------ 1000baseT MDI ("WAN") | | | 6-port +------ 1000baseT MDI ("LAN1") | CPU | | ethernet +------ 1000baseT MDI ("LAN2") | |MIImgmt| switch +------ 1000baseT MDI ("LAN3") | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4") | | | | +-----------+ +-----------+ The switch driver presents each port on the switch as a separate network interface to Linux, polls the switch to maintain software link state of those ports, forwards MII management interface accesses to those network interfaces (e.g. as done by ethtool) to the switch, and exposes the switch's hardware statistics counters via the appropriate Linux kernel interfaces. This initial patch supports the MII management interface register layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and supports the "Ethertype DSA" packet tagging format. (There is no officially registered ethertype for the Ethertype DSA packet format, so we just grab a random one. The ethertype to use is programmed into the switch, and the switch driver uses the value of ETH_P_EDSA for this, so this define can be changed at any time in the future if the one we chose is allocated to another protocol or if Ethertype DSA gets its own officially registered ethertype, and everything will continue to work.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 13:44:02 +00:00
{
struct dsa_switch *ds = bus->priv;
net: dsa: allow for more complex PHY setups Modify the DSA slave interface to be bound to an arbitray PHY, not just the ones that are available as child PHY devices of the switch MDIO bus. This allows us for instance to have external PHYs connected to a separate MDIO bus, but yet also connected to a given switch port. Under certain configurations, the physical port mask might not be a 1:1 mapping to the MII PHYs mask. This is the case, if e.g: Port 1 of the switch is used and connects to a PHY at a MDIO address different than 1. Introduce a phys_mii_mask variable which allows driver to implement and divert their own MDIO read/writes operations for a subset of the MDIO PHY addresses. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-28 00:04:51 +00:00
if (ds->phys_mii_mask & (1 << addr))
net: dsa: rename switch operations structure Now that the dsa_switch_driver structure contains only function pointers as it is supposed to, rename it to the more appropriate dsa_switch_ops, uniformly to any other operations structure in the kernel. No functional changes here, basically just the result of something like: s/dsa_switch_driver *drv/dsa_switch_ops *ops/g However keep the {un,}register_switch_driver functions and their dsa_switch_drivers list as is, since they represent the -- likely to be deprecated soon -- legacy DSA registration framework. In the meantime, also fix the following checks from checkpatch.pl to make it happy with this patch: CHECK: Comparison to NULL could be written "!ops" #403: FILE: net/dsa/dsa.c:470: + if (ops == NULL) { CHECK: Comparison to NULL could be written "ds->ops->get_strings" #773: FILE: net/dsa/slave.c:697: + if (ds->ops->get_strings != NULL) CHECK: Comparison to NULL could be written "ds->ops->get_ethtool_stats" #824: FILE: net/dsa/slave.c:785: + if (ds->ops->get_ethtool_stats != NULL) CHECK: Comparison to NULL could be written "ds->ops->get_sset_count" #835: FILE: net/dsa/slave.c:798: + if (ds->ops->get_sset_count != NULL) total: 0 errors, 0 warnings, 4 checks, 784 lines checked Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23 16:38:56 +00:00
return ds->ops->phy_write(ds, addr, reg, val);
net: Distributed Switch Architecture protocol support Distributed Switch Architecture is a protocol for managing hardware switch chips. It consists of a set of MII management registers and commands to configure the switch, and an ethernet header format to signal which of the ports of the switch a packet was received from or is intended to be sent to. The switches that this driver supports are typically embedded in access points and routers, and a typical setup with a DSA switch looks something like this: +-----------+ +-----------+ | | RGMII | | | +-------+ +------ 1000baseT MDI ("WAN") | | | 6-port +------ 1000baseT MDI ("LAN1") | CPU | | ethernet +------ 1000baseT MDI ("LAN2") | |MIImgmt| switch +------ 1000baseT MDI ("LAN3") | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4") | | | | +-----------+ +-----------+ The switch driver presents each port on the switch as a separate network interface to Linux, polls the switch to maintain software link state of those ports, forwards MII management interface accesses to those network interfaces (e.g. as done by ethtool) to the switch, and exposes the switch's hardware statistics counters via the appropriate Linux kernel interfaces. This initial patch supports the MII management interface register layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and supports the "Ethertype DSA" packet tagging format. (There is no officially registered ethertype for the Ethertype DSA packet format, so we just grab a random one. The ethertype to use is programmed into the switch, and the switch driver uses the value of ETH_P_EDSA for this, so this define can be changed at any time in the future if the one we chose is allocated to another protocol or if Ethertype DSA gets its own officially registered ethertype, and everything will continue to work.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 13:44:02 +00:00
return 0;
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
void dsa_user_mii_bus_init(struct dsa_switch *ds)
net: Distributed Switch Architecture protocol support Distributed Switch Architecture is a protocol for managing hardware switch chips. It consists of a set of MII management registers and commands to configure the switch, and an ethernet header format to signal which of the ports of the switch a packet was received from or is intended to be sent to. The switches that this driver supports are typically embedded in access points and routers, and a typical setup with a DSA switch looks something like this: +-----------+ +-----------+ | | RGMII | | | +-------+ +------ 1000baseT MDI ("WAN") | | | 6-port +------ 1000baseT MDI ("LAN1") | CPU | | ethernet +------ 1000baseT MDI ("LAN2") | |MIImgmt| switch +------ 1000baseT MDI ("LAN3") | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4") | | | | +-----------+ +-----------+ The switch driver presents each port on the switch as a separate network interface to Linux, polls the switch to maintain software link state of those ports, forwards MII management interface accesses to those network interfaces (e.g. as done by ethtool) to the switch, and exposes the switch's hardware statistics counters via the appropriate Linux kernel interfaces. This initial patch supports the MII management interface register layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and supports the "Ethertype DSA" packet tagging format. (There is no officially registered ethertype for the Ethertype DSA packet format, so we just grab a random one. The ethertype to use is programmed into the switch, and the switch driver uses the value of ETH_P_EDSA for this, so this define can be changed at any time in the future if the one we chose is allocated to another protocol or if Ethertype DSA gets its own officially registered ethertype, and everything will continue to work.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 13:44:02 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
ds->user_mii_bus->priv = (void *)ds;
ds->user_mii_bus->name = "dsa user smi";
ds->user_mii_bus->read = dsa_user_phy_read;
ds->user_mii_bus->write = dsa_user_phy_write;
snprintf(ds->user_mii_bus->id, MII_BUS_ID_SIZE, "dsa-%d.%d",
net: dsa: make tree index unsigned Similarly to a DSA switch and port, rename the tree index from "tree" to "index" and make it an unsigned int because it isn't supposed to be less than 0. u32 is an OF specific data used to retrieve the value and has no need to be propagated up to the tree index. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03 23:05:21 +00:00
ds->dst->index, ds->index);
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
ds->user_mii_bus->parent = ds->dev;
ds->user_mii_bus->phy_mask = ~ds->phys_mii_mask;
net: Distributed Switch Architecture protocol support Distributed Switch Architecture is a protocol for managing hardware switch chips. It consists of a set of MII management registers and commands to configure the switch, and an ethernet header format to signal which of the ports of the switch a packet was received from or is intended to be sent to. The switches that this driver supports are typically embedded in access points and routers, and a typical setup with a DSA switch looks something like this: +-----------+ +-----------+ | | RGMII | | | +-------+ +------ 1000baseT MDI ("WAN") | | | 6-port +------ 1000baseT MDI ("LAN1") | CPU | | ethernet +------ 1000baseT MDI ("LAN2") | |MIImgmt| switch +------ 1000baseT MDI ("LAN3") | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4") | | | | +-----------+ +-----------+ The switch driver presents each port on the switch as a separate network interface to Linux, polls the switch to maintain software link state of those ports, forwards MII management interface accesses to those network interfaces (e.g. as done by ethtool) to the switch, and exposes the switch's hardware statistics counters via the appropriate Linux kernel interfaces. This initial patch supports the MII management interface register layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and supports the "Ethertype DSA" packet tagging format. (There is no officially registered ethertype for the Ethertype DSA packet format, so we just grab a random one. The ethertype to use is programmed into the switch, and the switch driver uses the value of ETH_P_EDSA for this, so this define can be changed at any time in the future if the one we chose is allocated to another protocol or if Ethertype DSA gets its own officially registered ethertype, and everything will continue to work.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 13:44:02 +00:00
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
/* user device handling ****************************************************/
static int dsa_user_get_iflink(const struct net_device *dev)
dsa: set ->iflink on slave interfaces to the ifindex of the parent ..so that we can parse the DSA topology from 'ip link' output: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 4: lan1@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue 5: lan2@eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue 6: lan3@eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue 7: lan4@eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-20 09:49:49 +00:00
{
rtnetlink: prepare nla_put_iflink() to run under RCU We want to be able to run rtnl_fill_ifinfo() under RCU protection instead of RTNL in the future. This patch prepares dev_get_iflink() and nla_put_iflink() to run either with RTNL or RCU held. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-22 10:50:08 +00:00
return READ_ONCE(dsa_user_to_conduit(dev)->ifindex);
dsa: set ->iflink on slave interfaces to the ifindex of the parent ..so that we can parse the DSA topology from 'ip link' output: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 4: lan1@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue 5: lan2@eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue 6: lan3@eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue 7: lan4@eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-20 09:49:49 +00:00
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_open(struct net_device *dev)
net: Distributed Switch Architecture protocol support Distributed Switch Architecture is a protocol for managing hardware switch chips. It consists of a set of MII management registers and commands to configure the switch, and an ethernet header format to signal which of the ports of the switch a packet was received from or is intended to be sent to. The switches that this driver supports are typically embedded in access points and routers, and a typical setup with a DSA switch looks something like this: +-----------+ +-----------+ | | RGMII | | | +-------+ +------ 1000baseT MDI ("WAN") | | | 6-port +------ 1000baseT MDI ("LAN1") | CPU | | ethernet +------ 1000baseT MDI ("LAN2") | |MIImgmt| switch +------ 1000baseT MDI ("LAN3") | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4") | | | | +-----------+ +-----------+ The switch driver presents each port on the switch as a separate network interface to Linux, polls the switch to maintain software link state of those ports, forwards MII management interface accesses to those network interfaces (e.g. as done by ethtool) to the switch, and exposes the switch's hardware statistics counters via the appropriate Linux kernel interfaces. This initial patch supports the MII management interface register layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and supports the "Ethertype DSA" packet tagging format. (There is no officially registered ethertype for the Ethertype DSA packet format, so we just grab a random one. The ethertype to use is programmed into the switch, and the switch driver uses the value of ETH_P_EDSA for this, so this define can be changed at any time in the future if the one we chose is allocated to another protocol or if Ethertype DSA gets its own officially registered ethertype, and everything will continue to work.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 13:44:02 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct net_device *conduit = dsa_user_to_conduit(dev);
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: install the primary unicast MAC address as standalone port host FDB To be able to safely turn off CPU flooding for standalone ports, we need to ensure that the dev_addr of each DSA slave interface is installed as a standalone host FDB entry for compatible switches. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 19:14:11 +00:00
struct dsa_switch *ds = dp->ds;
dsa: fix master interface allmulti/promisc handling Before commit b6c40d68ff6498b7f63ddf97cf0aa818d748dee7 ("net: only invoke dev->change_rx_flags when device is UP"), the dsa driver could sort-of get away with only fiddling with the master interface's allmulti/promisc counts in ->change_rx_flags() and not touching them in ->open() or ->stop(). After this commit (note that it was merged almost simultaneously with the dsa patches, which is why this wasn't caught initially), the breakage that was already there became more apparent. Since it makes no sense to keep the master interface's allmulti or promisc count pinned for a slave interface that is down, copy the vlan driver's sync logic (which does exactly what we want) over to dsa to fix this. Bug report from Dirk Teurlings <dirk@upexia.nl> and Peter van Valderen <linux@ddcrew.com>. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Tested-by: Peter van Valderen <linux@ddcrew.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-11 05:53:12 +00:00
int err;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
err = dev_open(conduit, NULL);
net: dsa: automatically bring up DSA master when opening user port DSA wants the master interface to be open before the user port is due to historical reasons. The promiscuity of interfaces that are down used to have issues, as referenced Lennert Buytenhek in commit df02c6ff2e39 ("dsa: fix master interface allmulti/promisc handling"). The bugfix mentioned there, commit b6c40d68ff64 ("net: only invoke dev->change_rx_flags when device is UP"), was basically a "don't do that" approach to working around the promiscuity while down issue. Further work done by Vlad Yasevich in commit d2615bf45069 ("net: core: Always propagate flag changes to interfaces") has resolved the underlying issue, and it is strictly up to the DSA and 8021q drivers now, it is no longer mandated by the networking core that the master interface must be up when changing its promiscuity. From DSA's point of view, deciding to error out in dsa_slave_open because the master isn't up is (a) a bad user experience and (b) knocking at an open door. Even if there still was an issue with promiscuity while down, DSA could still just open the master and avoid it. Doing it this way has the additional benefit that user space can now remove DSA-specific workarounds, like systemd-networkd with BindCarrier: https://github.com/systemd/systemd/issues/7478 And we can finally remove one of the 2 bullets in the "Common pitfalls using DSA setups" chapter. Tested with two cascaded DSA switches: $ ip link set sw0p2 up fsl_enetc 0000:00:00.2 eno2: configuring for fixed/internal link mode fsl_enetc 0000:00:00.2 eno2: Link is Up - 1Gbps/Full - flow control rx/tx mscc_felix 0000:00:00.5 swp0: configuring for fixed/sgmii link mode mscc_felix 0000:00:00.5 swp0: Link is Up - 1Gbps/Full - flow control off 8021q: adding VLAN 0 to HW filter on device swp0 sja1105 spi2.0 sw0p2: configuring for phy/rgmii-id link mode IPv6: ADDRCONF(NETDEV_CHANGE): eno2: link becomes ready IPv6: ADDRCONF(NETDEV_CHANGE): swp0: link becomes ready Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-05 13:37:10 +00:00
if (err < 0) {
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
netdev_err(dev, "failed to open conduit %s\n", conduit->name);
net: dsa: automatically bring up DSA master when opening user port DSA wants the master interface to be open before the user port is due to historical reasons. The promiscuity of interfaces that are down used to have issues, as referenced Lennert Buytenhek in commit df02c6ff2e39 ("dsa: fix master interface allmulti/promisc handling"). The bugfix mentioned there, commit b6c40d68ff64 ("net: only invoke dev->change_rx_flags when device is UP"), was basically a "don't do that" approach to working around the promiscuity while down issue. Further work done by Vlad Yasevich in commit d2615bf45069 ("net: core: Always propagate flag changes to interfaces") has resolved the underlying issue, and it is strictly up to the DSA and 8021q drivers now, it is no longer mandated by the networking core that the master interface must be up when changing its promiscuity. From DSA's point of view, deciding to error out in dsa_slave_open because the master isn't up is (a) a bad user experience and (b) knocking at an open door. Even if there still was an issue with promiscuity while down, DSA could still just open the master and avoid it. Doing it this way has the additional benefit that user space can now remove DSA-specific workarounds, like systemd-networkd with BindCarrier: https://github.com/systemd/systemd/issues/7478 And we can finally remove one of the 2 bullets in the "Common pitfalls using DSA setups" chapter. Tested with two cascaded DSA switches: $ ip link set sw0p2 up fsl_enetc 0000:00:00.2 eno2: configuring for fixed/internal link mode fsl_enetc 0000:00:00.2 eno2: Link is Up - 1Gbps/Full - flow control rx/tx mscc_felix 0000:00:00.5 swp0: configuring for fixed/sgmii link mode mscc_felix 0000:00:00.5 swp0: Link is Up - 1Gbps/Full - flow control off 8021q: adding VLAN 0 to HW filter on device swp0 sja1105 spi2.0 sw0p2: configuring for phy/rgmii-id link mode IPv6: ADDRCONF(NETDEV_CHANGE): eno2: link becomes ready IPv6: ADDRCONF(NETDEV_CHANGE): swp0: link becomes ready Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-05 13:37:10 +00:00
goto out;
}
dsa: fix master interface allmulti/promisc handling Before commit b6c40d68ff6498b7f63ddf97cf0aa818d748dee7 ("net: only invoke dev->change_rx_flags when device is UP"), the dsa driver could sort-of get away with only fiddling with the master interface's allmulti/promisc counts in ->change_rx_flags() and not touching them in ->open() or ->stop(). After this commit (note that it was merged almost simultaneously with the dsa patches, which is why this wasn't caught initially), the breakage that was already there became more apparent. Since it makes no sense to keep the master interface's allmulti or promisc count pinned for a slave interface that is down, copy the vlan driver's sync logic (which does exactly what we want) over to dsa to fix this. Bug report from Dirk Teurlings <dirk@upexia.nl> and Peter van Valderen <linux@ddcrew.com>. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Tested-by: Peter van Valderen <linux@ddcrew.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-11 05:53:12 +00:00
net: dsa: install the primary unicast MAC address as standalone port host FDB To be able to safely turn off CPU flooding for standalone ports, we need to ensure that the dev_addr of each DSA slave interface is installed as a standalone host FDB entry for compatible switches. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 19:14:11 +00:00
if (dsa_switch_supports_uc_filtering(ds)) {
err = dsa_port_standalone_host_fdb_add(dp, dev->dev_addr, 0);
if (err)
goto out;
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
if (!ether_addr_equal(dev->dev_addr, conduit->dev_addr)) {
err = dev_uc_add(conduit, dev->dev_addr);
dsa: fix master interface allmulti/promisc handling Before commit b6c40d68ff6498b7f63ddf97cf0aa818d748dee7 ("net: only invoke dev->change_rx_flags when device is UP"), the dsa driver could sort-of get away with only fiddling with the master interface's allmulti/promisc counts in ->change_rx_flags() and not touching them in ->open() or ->stop(). After this commit (note that it was merged almost simultaneously with the dsa patches, which is why this wasn't caught initially), the breakage that was already there became more apparent. Since it makes no sense to keep the master interface's allmulti or promisc count pinned for a slave interface that is down, copy the vlan driver's sync logic (which does exactly what we want) over to dsa to fix this. Bug report from Dirk Teurlings <dirk@upexia.nl> and Peter van Valderen <linux@ddcrew.com>. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Tested-by: Peter van Valderen <linux@ddcrew.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-11 05:53:12 +00:00
if (err < 0)
net: dsa: install the primary unicast MAC address as standalone port host FDB To be able to safely turn off CPU flooding for standalone ports, we need to ensure that the dev_addr of each DSA slave interface is installed as a standalone host FDB entry for compatible switches. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 19:14:11 +00:00
goto del_host_addr;
dsa: fix master interface allmulti/promisc handling Before commit b6c40d68ff6498b7f63ddf97cf0aa818d748dee7 ("net: only invoke dev->change_rx_flags when device is UP"), the dsa driver could sort-of get away with only fiddling with the master interface's allmulti/promisc counts in ->change_rx_flags() and not touching them in ->open() or ->stop(). After this commit (note that it was merged almost simultaneously with the dsa patches, which is why this wasn't caught initially), the breakage that was already there became more apparent. Since it makes no sense to keep the master interface's allmulti or promisc count pinned for a slave interface that is down, copy the vlan driver's sync logic (which does exactly what we want) over to dsa to fix this. Bug report from Dirk Teurlings <dirk@upexia.nl> and Peter van Valderen <linux@ddcrew.com>. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Tested-by: Peter van Valderen <linux@ddcrew.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-11 05:53:12 +00:00
}
net: dsa: fix phylink_start()/phylink_stop() calls Place phylink_start()/phylink_stop() inside dsa_port_enable() and dsa_port_disable(), which ensures that we call phylink_stop() before tearing down phylink - which is a documented requirement. Failure to do so can cause use-after-free bugs. Fixes: 0e27921816ad ("net: dsa: Use PHYLINK for the CPU/DSA ports") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03 15:01:46 +00:00
err = dsa_port_enable_rt(dp, dev->phydev);
net: dsa: add port enable and disable helpers Provide dsa_port_enable and dsa_port_disable helpers to respectively enable and disable a switch port. This makes the dsa_port_set_state_now helper static. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-22 23:01:56 +00:00
if (err)
net: dsa: remove workarounds for changing master promisc/allmulti only while up Lennert Buytenhek explains in commit df02c6ff2e39 ("dsa: fix master interface allmulti/promisc handling"), dated Nov 2008, that changing the promiscuity of interfaces that are down (here the master) is broken. This fact regarding promisc/allmulti has changed since commit b6c40d68ff64 ("net: only invoke dev->change_rx_flags when device is UP") by Vlad Yasevich, dated Nov 2013. Therefore, DSA now has unnecessary complexity to handle master state transitions from down to up. In fact, syncing the unicast and multicast addresses can happen completely asynchronously to the administrative state changes. This change reduces that complexity by effectively fully reverting commit df02c6ff2e39 ("dsa: fix master interface allmulti/promisc handling"). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 19:14:08 +00:00
goto del_unicast;
net: dsa: integrate with SWITCHDEV for HW bridging In order to support bridging offloads in DSA switch drivers, select NET_SWITCHDEV to get access to the port_stp_update and parent_get_id NDOs that we are required to implement. To facilitate the integratation at the DSA driver level, we implement 3 types of operations: - port_join_bridge - port_leave_bridge - port_stp_update DSA will resolve which switch ports that are currently bridge port members as some Switch hardware/drivers need to know about that to limit the register programming to just the relevant registers (especially for slow MDIO buses). We also take care of setting the correct STP state when slave network devices are brought up/down while being bridge members. Finally, when a port is leaving the bridge, we make sure we set in BR_STATE_FORWARDING state, otherwise the bridge layer would leave it disabled as a result of having left the bridge. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-24 21:15:33 +00:00
net: Distributed Switch Architecture protocol support Distributed Switch Architecture is a protocol for managing hardware switch chips. It consists of a set of MII management registers and commands to configure the switch, and an ethernet header format to signal which of the ports of the switch a packet was received from or is intended to be sent to. The switches that this driver supports are typically embedded in access points and routers, and a typical setup with a DSA switch looks something like this: +-----------+ +-----------+ | | RGMII | | | +-------+ +------ 1000baseT MDI ("WAN") | | | 6-port +------ 1000baseT MDI ("LAN1") | CPU | | ethernet +------ 1000baseT MDI ("LAN2") | |MIImgmt| switch +------ 1000baseT MDI ("LAN3") | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4") | | | | +-----------+ +-----------+ The switch driver presents each port on the switch as a separate network interface to Linux, polls the switch to maintain software link state of those ports, forwards MII management interface accesses to those network interfaces (e.g. as done by ethtool) to the switch, and exposes the switch's hardware statistics counters via the appropriate Linux kernel interfaces. This initial patch supports the MII management interface register layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and supports the "Ethertype DSA" packet tagging format. (There is no officially registered ethertype for the Ethertype DSA packet format, so we just grab a random one. The ethertype to use is programmed into the switch, and the switch driver uses the value of ETH_P_EDSA for this, so this define can be changed at any time in the future if the one we chose is allocated to another protocol or if Ethertype DSA gets its own officially registered ethertype, and everything will continue to work.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 13:44:02 +00:00
return 0;
dsa: fix master interface allmulti/promisc handling Before commit b6c40d68ff6498b7f63ddf97cf0aa818d748dee7 ("net: only invoke dev->change_rx_flags when device is UP"), the dsa driver could sort-of get away with only fiddling with the master interface's allmulti/promisc counts in ->change_rx_flags() and not touching them in ->open() or ->stop(). After this commit (note that it was merged almost simultaneously with the dsa patches, which is why this wasn't caught initially), the breakage that was already there became more apparent. Since it makes no sense to keep the master interface's allmulti or promisc count pinned for a slave interface that is down, copy the vlan driver's sync logic (which does exactly what we want) over to dsa to fix this. Bug report from Dirk Teurlings <dirk@upexia.nl> and Peter van Valderen <linux@ddcrew.com>. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Tested-by: Peter van Valderen <linux@ddcrew.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-11 05:53:12 +00:00
del_unicast:
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
if (!ether_addr_equal(dev->dev_addr, conduit->dev_addr))
dev_uc_del(conduit, dev->dev_addr);
net: dsa: install the primary unicast MAC address as standalone port host FDB To be able to safely turn off CPU flooding for standalone ports, we need to ensure that the dev_addr of each DSA slave interface is installed as a standalone host FDB entry for compatible switches. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 19:14:11 +00:00
del_host_addr:
if (dsa_switch_supports_uc_filtering(ds))
dsa_port_standalone_host_fdb_del(dp, dev->dev_addr, 0);
dsa: fix master interface allmulti/promisc handling Before commit b6c40d68ff6498b7f63ddf97cf0aa818d748dee7 ("net: only invoke dev->change_rx_flags when device is UP"), the dsa driver could sort-of get away with only fiddling with the master interface's allmulti/promisc counts in ->change_rx_flags() and not touching them in ->open() or ->stop(). After this commit (note that it was merged almost simultaneously with the dsa patches, which is why this wasn't caught initially), the breakage that was already there became more apparent. Since it makes no sense to keep the master interface's allmulti or promisc count pinned for a slave interface that is down, copy the vlan driver's sync logic (which does exactly what we want) over to dsa to fix this. Bug report from Dirk Teurlings <dirk@upexia.nl> and Peter van Valderen <linux@ddcrew.com>. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Tested-by: Peter van Valderen <linux@ddcrew.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-11 05:53:12 +00:00
out:
return err;
net: Distributed Switch Architecture protocol support Distributed Switch Architecture is a protocol for managing hardware switch chips. It consists of a set of MII management registers and commands to configure the switch, and an ethernet header format to signal which of the ports of the switch a packet was received from or is intended to be sent to. The switches that this driver supports are typically embedded in access points and routers, and a typical setup with a DSA switch looks something like this: +-----------+ +-----------+ | | RGMII | | | +-------+ +------ 1000baseT MDI ("WAN") | | | 6-port +------ 1000baseT MDI ("LAN1") | CPU | | ethernet +------ 1000baseT MDI ("LAN2") | |MIImgmt| switch +------ 1000baseT MDI ("LAN3") | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4") | | | | +-----------+ +-----------+ The switch driver presents each port on the switch as a separate network interface to Linux, polls the switch to maintain software link state of those ports, forwards MII management interface accesses to those network interfaces (e.g. as done by ethtool) to the switch, and exposes the switch's hardware statistics counters via the appropriate Linux kernel interfaces. This initial patch supports the MII management interface register layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and supports the "Ethertype DSA" packet tagging format. (There is no officially registered ethertype for the Ethertype DSA packet format, so we just grab a random one. The ethertype to use is programmed into the switch, and the switch driver uses the value of ETH_P_EDSA for this, so this define can be changed at any time in the future if the one we chose is allocated to another protocol or if Ethertype DSA gets its own officially registered ethertype, and everything will continue to work.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 13:44:02 +00:00
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_close(struct net_device *dev)
net: Distributed Switch Architecture protocol support Distributed Switch Architecture is a protocol for managing hardware switch chips. It consists of a set of MII management registers and commands to configure the switch, and an ethernet header format to signal which of the ports of the switch a packet was received from or is intended to be sent to. The switches that this driver supports are typically embedded in access points and routers, and a typical setup with a DSA switch looks something like this: +-----------+ +-----------+ | | RGMII | | | +-------+ +------ 1000baseT MDI ("WAN") | | | 6-port +------ 1000baseT MDI ("LAN1") | CPU | | ethernet +------ 1000baseT MDI ("LAN2") | |MIImgmt| switch +------ 1000baseT MDI ("LAN3") | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4") | | | | +-----------+ +-----------+ The switch driver presents each port on the switch as a separate network interface to Linux, polls the switch to maintain software link state of those ports, forwards MII management interface accesses to those network interfaces (e.g. as done by ethtool) to the switch, and exposes the switch's hardware statistics counters via the appropriate Linux kernel interfaces. This initial patch supports the MII management interface register layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and supports the "Ethertype DSA" packet tagging format. (There is no officially registered ethertype for the Ethertype DSA packet format, so we just grab a random one. The ethertype to use is programmed into the switch, and the switch driver uses the value of ETH_P_EDSA for this, so this define can be changed at any time in the future if the one we chose is allocated to another protocol or if Ethertype DSA gets its own officially registered ethertype, and everything will continue to work.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 13:44:02 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct net_device *conduit = dsa_user_to_conduit(dev);
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: install the primary unicast MAC address as standalone port host FDB To be able to safely turn off CPU flooding for standalone ports, we need to ensure that the dev_addr of each DSA slave interface is installed as a standalone host FDB entry for compatible switches. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 19:14:11 +00:00
struct dsa_switch *ds = dp->ds;
dsa: fix master interface allmulti/promisc handling Before commit b6c40d68ff6498b7f63ddf97cf0aa818d748dee7 ("net: only invoke dev->change_rx_flags when device is UP"), the dsa driver could sort-of get away with only fiddling with the master interface's allmulti/promisc counts in ->change_rx_flags() and not touching them in ->open() or ->stop(). After this commit (note that it was merged almost simultaneously with the dsa patches, which is why this wasn't caught initially), the breakage that was already there became more apparent. Since it makes no sense to keep the master interface's allmulti or promisc count pinned for a slave interface that is down, copy the vlan driver's sync logic (which does exactly what we want) over to dsa to fix this. Bug report from Dirk Teurlings <dirk@upexia.nl> and Peter van Valderen <linux@ddcrew.com>. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Tested-by: Peter van Valderen <linux@ddcrew.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-11 05:53:12 +00:00
net: dsa: fix phylink_start()/phylink_stop() calls Place phylink_start()/phylink_stop() inside dsa_port_enable() and dsa_port_disable(), which ensures that we call phylink_stop() before tearing down phylink - which is a documented requirement. Failure to do so can cause use-after-free bugs. Fixes: 0e27921816ad ("net: dsa: Use PHYLINK for the CPU/DSA ports") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03 15:01:46 +00:00
dsa_port_disable_rt(dp);
net: dsa: make slave close symmetrical to open The DSA slave open function configures the unicast MAC addresses on the master device, enable the switch port, change its STP state, then start the PHY device. Make the close function symmetric, by first stopping the PHY device, then changing the STP state, disabling the switch port and restore the master device. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-22 23:01:55 +00:00
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
if (!ether_addr_equal(dev->dev_addr, conduit->dev_addr))
dev_uc_del(conduit, dev->dev_addr);
dsa: fix master interface allmulti/promisc handling Before commit b6c40d68ff6498b7f63ddf97cf0aa818d748dee7 ("net: only invoke dev->change_rx_flags when device is UP"), the dsa driver could sort-of get away with only fiddling with the master interface's allmulti/promisc counts in ->change_rx_flags() and not touching them in ->open() or ->stop(). After this commit (note that it was merged almost simultaneously with the dsa patches, which is why this wasn't caught initially), the breakage that was already there became more apparent. Since it makes no sense to keep the master interface's allmulti or promisc count pinned for a slave interface that is down, copy the vlan driver's sync logic (which does exactly what we want) over to dsa to fix this. Bug report from Dirk Teurlings <dirk@upexia.nl> and Peter van Valderen <linux@ddcrew.com>. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Tested-by: Peter van Valderen <linux@ddcrew.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-11 05:53:12 +00:00
net: dsa: install the primary unicast MAC address as standalone port host FDB To be able to safely turn off CPU flooding for standalone ports, we need to ensure that the dev_addr of each DSA slave interface is installed as a standalone host FDB entry for compatible switches. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 19:14:11 +00:00
if (dsa_switch_supports_uc_filtering(ds))
dsa_port_standalone_host_fdb_del(dp, dev->dev_addr, 0);
net: Distributed Switch Architecture protocol support Distributed Switch Architecture is a protocol for managing hardware switch chips. It consists of a set of MII management registers and commands to configure the switch, and an ethernet header format to signal which of the ports of the switch a packet was received from or is intended to be sent to. The switches that this driver supports are typically embedded in access points and routers, and a typical setup with a DSA switch looks something like this: +-----------+ +-----------+ | | RGMII | | | +-------+ +------ 1000baseT MDI ("WAN") | | | 6-port +------ 1000baseT MDI ("LAN1") | CPU | | ethernet +------ 1000baseT MDI ("LAN2") | |MIImgmt| switch +------ 1000baseT MDI ("LAN3") | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4") | | | | +-----------+ +-----------+ The switch driver presents each port on the switch as a separate network interface to Linux, polls the switch to maintain software link state of those ports, forwards MII management interface accesses to those network interfaces (e.g. as done by ethtool) to the switch, and exposes the switch's hardware statistics counters via the appropriate Linux kernel interfaces. This initial patch supports the MII management interface register layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and supports the "Ethertype DSA" packet tagging format. (There is no officially registered ethertype for the Ethertype DSA packet format, so we just grab a random one. The ethertype to use is programmed into the switch, and the switch driver uses the value of ETH_P_EDSA for this, so this define can be changed at any time in the future if the one we chose is allocated to another protocol or if Ethertype DSA gets its own officially registered ethertype, and everything will continue to work.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 13:44:02 +00:00
return 0;
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static void dsa_user_manage_host_flood(struct net_device *dev)
net: dsa: manage flooding on the CPU ports DSA can treat IFF_PROMISC and IFF_ALLMULTI on standalone user ports as signifying whether packets with an unknown MAC DA will be received or not. Since known MAC DAs are handled by FDB/MDB entries, this means that promiscuity is analogous to including/excluding the CPU port from the flood domain of those packets. There are two ways to signal CPU flooding to drivers. The first (chosen here) is to synthesize a call to ds->ops->port_bridge_flags() for the CPU port, with a mask of BR_FLOOD | BR_MCAST_FLOOD. This has the effect of turning on egress flooding on the CPU port regardless of source. The alternative would be to create a new ds->ops->port_host_flood() which is called per user port. Some switches (sja1105) have a flood domain that is managed per {ingress port, egress port} pair, so it would make more sense for this kind of switch to not flood the CPU from port A if just port B requires it. Nonetheless, the sja1105 has other quirks that prevent it from making use of unicast filtering, and without a concrete user making use of this feature, I chose not to implement it. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 19:14:12 +00:00
{
net: dsa: felix: manage host flooding using a specific driver callback At the time - commit 7569459a52c9 ("net: dsa: manage flooding on the CPU ports") - not introducing a dedicated switch callback for host flooding made sense, because for the only user, the felix driver, there was nothing different to do for the CPU port than set the flood flags on the CPU port just like on any other bridge port. There are 2 reasons why this approach is not good enough, however. (1) Other drivers, like sja1105, support configuring flooding as a function of {ingress port, egress port}, whereas the DSA ->port_bridge_flags() function only operates on an egress port. So with that driver we'd have useless host flooding from user ports which don't need it. (2) Even with the felix driver, support for multiple CPU ports makes it difficult to piggyback on ->port_bridge_flags(). The way in which the felix driver is going to support host-filtered addresses with multiple CPU ports is that it will direct these addresses towards both CPU ports (in a sort of multicast fashion), then restrict the forwarding to only one of the two using the forwarding masks. Consequently, flooding will also be enabled towards both CPU ports. However, ->port_bridge_flags() gets passed the index of a single CPU port, and that leaves the flood settings out of sync between the 2 CPU ports. This is to say, it's better to have a specific driver method for host flooding, which takes the user port as argument. This solves problem (1) by allowing the driver to do different things for different user ports, and problem (2) by abstracting the operation and letting the driver do whatever, rather than explicitly making the DSA core point to the CPU port it thinks needs to be touched. This new method also creates a problem, which is that cross-chip setups are not handled. However I don't have hardware right now where I can test what is the proper thing to do, and there isn't hardware compatible with multi-switch trees that supports host flooding. So it remains a problem to be tackled in the future. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-11 09:50:17 +00:00
bool mc = dev->flags & (IFF_PROMISC | IFF_ALLMULTI);
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: felix: manage host flooding using a specific driver callback At the time - commit 7569459a52c9 ("net: dsa: manage flooding on the CPU ports") - not introducing a dedicated switch callback for host flooding made sense, because for the only user, the felix driver, there was nothing different to do for the CPU port than set the flood flags on the CPU port just like on any other bridge port. There are 2 reasons why this approach is not good enough, however. (1) Other drivers, like sja1105, support configuring flooding as a function of {ingress port, egress port}, whereas the DSA ->port_bridge_flags() function only operates on an egress port. So with that driver we'd have useless host flooding from user ports which don't need it. (2) Even with the felix driver, support for multiple CPU ports makes it difficult to piggyback on ->port_bridge_flags(). The way in which the felix driver is going to support host-filtered addresses with multiple CPU ports is that it will direct these addresses towards both CPU ports (in a sort of multicast fashion), then restrict the forwarding to only one of the two using the forwarding masks. Consequently, flooding will also be enabled towards both CPU ports. However, ->port_bridge_flags() gets passed the index of a single CPU port, and that leaves the flood settings out of sync between the 2 CPU ports. This is to say, it's better to have a specific driver method for host flooding, which takes the user port as argument. This solves problem (1) by allowing the driver to do different things for different user ports, and problem (2) by abstracting the operation and letting the driver do whatever, rather than explicitly making the DSA core point to the CPU port it thinks needs to be touched. This new method also creates a problem, which is that cross-chip setups are not handled. However I don't have hardware right now where I can test what is the proper thing to do, and there isn't hardware compatible with multi-switch trees that supports host flooding. So it remains a problem to be tackled in the future. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-11 09:50:17 +00:00
bool uc = dev->flags & IFF_PROMISC;
net: dsa: manage flooding on the CPU ports DSA can treat IFF_PROMISC and IFF_ALLMULTI on standalone user ports as signifying whether packets with an unknown MAC DA will be received or not. Since known MAC DAs are handled by FDB/MDB entries, this means that promiscuity is analogous to including/excluding the CPU port from the flood domain of those packets. There are two ways to signal CPU flooding to drivers. The first (chosen here) is to synthesize a call to ds->ops->port_bridge_flags() for the CPU port, with a mask of BR_FLOOD | BR_MCAST_FLOOD. This has the effect of turning on egress flooding on the CPU port regardless of source. The alternative would be to create a new ds->ops->port_host_flood() which is called per user port. Some switches (sja1105) have a flood domain that is managed per {ingress port, egress port} pair, so it would make more sense for this kind of switch to not flood the CPU from port A if just port B requires it. Nonetheless, the sja1105 has other quirks that prevent it from making use of unicast filtering, and without a concrete user making use of this feature, I chose not to implement it. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 19:14:12 +00:00
net: dsa: felix: manage host flooding using a specific driver callback At the time - commit 7569459a52c9 ("net: dsa: manage flooding on the CPU ports") - not introducing a dedicated switch callback for host flooding made sense, because for the only user, the felix driver, there was nothing different to do for the CPU port than set the flood flags on the CPU port just like on any other bridge port. There are 2 reasons why this approach is not good enough, however. (1) Other drivers, like sja1105, support configuring flooding as a function of {ingress port, egress port}, whereas the DSA ->port_bridge_flags() function only operates on an egress port. So with that driver we'd have useless host flooding from user ports which don't need it. (2) Even with the felix driver, support for multiple CPU ports makes it difficult to piggyback on ->port_bridge_flags(). The way in which the felix driver is going to support host-filtered addresses with multiple CPU ports is that it will direct these addresses towards both CPU ports (in a sort of multicast fashion), then restrict the forwarding to only one of the two using the forwarding masks. Consequently, flooding will also be enabled towards both CPU ports. However, ->port_bridge_flags() gets passed the index of a single CPU port, and that leaves the flood settings out of sync between the 2 CPU ports. This is to say, it's better to have a specific driver method for host flooding, which takes the user port as argument. This solves problem (1) by allowing the driver to do different things for different user ports, and problem (2) by abstracting the operation and letting the driver do whatever, rather than explicitly making the DSA core point to the CPU port it thinks needs to be touched. This new method also creates a problem, which is that cross-chip setups are not handled. However I don't have hardware right now where I can test what is the proper thing to do, and there isn't hardware compatible with multi-switch trees that supports host flooding. So it remains a problem to be tackled in the future. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-11 09:50:17 +00:00
dsa_port_set_host_flood(dp, uc, mc);
net: dsa: manage flooding on the CPU ports DSA can treat IFF_PROMISC and IFF_ALLMULTI on standalone user ports as signifying whether packets with an unknown MAC DA will be received or not. Since known MAC DAs are handled by FDB/MDB entries, this means that promiscuity is analogous to including/excluding the CPU port from the flood domain of those packets. There are two ways to signal CPU flooding to drivers. The first (chosen here) is to synthesize a call to ds->ops->port_bridge_flags() for the CPU port, with a mask of BR_FLOOD | BR_MCAST_FLOOD. This has the effect of turning on egress flooding on the CPU port regardless of source. The alternative would be to create a new ds->ops->port_host_flood() which is called per user port. Some switches (sja1105) have a flood domain that is managed per {ingress port, egress port} pair, so it would make more sense for this kind of switch to not flood the CPU from port A if just port B requires it. Nonetheless, the sja1105 has other quirks that prevent it from making use of unicast filtering, and without a concrete user making use of this feature, I chose not to implement it. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 19:14:12 +00:00
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static void dsa_user_change_rx_flags(struct net_device *dev, int change)
net: Distributed Switch Architecture protocol support Distributed Switch Architecture is a protocol for managing hardware switch chips. It consists of a set of MII management registers and commands to configure the switch, and an ethernet header format to signal which of the ports of the switch a packet was received from or is intended to be sent to. The switches that this driver supports are typically embedded in access points and routers, and a typical setup with a DSA switch looks something like this: +-----------+ +-----------+ | | RGMII | | | +-------+ +------ 1000baseT MDI ("WAN") | | | 6-port +------ 1000baseT MDI ("LAN1") | CPU | | ethernet +------ 1000baseT MDI ("LAN2") | |MIImgmt| switch +------ 1000baseT MDI ("LAN3") | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4") | | | | +-----------+ +-----------+ The switch driver presents each port on the switch as a separate network interface to Linux, polls the switch to maintain software link state of those ports, forwards MII management interface accesses to those network interfaces (e.g. as done by ethtool) to the switch, and exposes the switch's hardware statistics counters via the appropriate Linux kernel interfaces. This initial patch supports the MII management interface register layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and supports the "Ethertype DSA" packet tagging format. (There is no officially registered ethertype for the Ethertype DSA packet format, so we just grab a random one. The ethertype to use is programmed into the switch, and the switch driver uses the value of ETH_P_EDSA for this, so this define can be changed at any time in the future if the one we chose is allocated to another protocol or if Ethertype DSA gets its own officially registered ethertype, and everything will continue to work.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 13:44:02 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct net_device *conduit = dsa_user_to_conduit(dev);
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: manage flooding on the CPU ports DSA can treat IFF_PROMISC and IFF_ALLMULTI on standalone user ports as signifying whether packets with an unknown MAC DA will be received or not. Since known MAC DAs are handled by FDB/MDB entries, this means that promiscuity is analogous to including/excluding the CPU port from the flood domain of those packets. There are two ways to signal CPU flooding to drivers. The first (chosen here) is to synthesize a call to ds->ops->port_bridge_flags() for the CPU port, with a mask of BR_FLOOD | BR_MCAST_FLOOD. This has the effect of turning on egress flooding on the CPU port regardless of source. The alternative would be to create a new ds->ops->port_host_flood() which is called per user port. Some switches (sja1105) have a flood domain that is managed per {ingress port, egress port} pair, so it would make more sense for this kind of switch to not flood the CPU from port A if just port B requires it. Nonetheless, the sja1105 has other quirks that prevent it from making use of unicast filtering, and without a concrete user making use of this feature, I chose not to implement it. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 19:14:12 +00:00
struct dsa_switch *ds = dp->ds;
net: dsa: remove workarounds for changing master promisc/allmulti only while up Lennert Buytenhek explains in commit df02c6ff2e39 ("dsa: fix master interface allmulti/promisc handling"), dated Nov 2008, that changing the promiscuity of interfaces that are down (here the master) is broken. This fact regarding promisc/allmulti has changed since commit b6c40d68ff64 ("net: only invoke dev->change_rx_flags when device is UP") by Vlad Yasevich, dated Nov 2013. Therefore, DSA now has unnecessary complexity to handle master state transitions from down to up. In fact, syncing the unicast and multicast addresses can happen completely asynchronously to the administrative state changes. This change reduces that complexity by effectively fully reverting commit df02c6ff2e39 ("dsa: fix master interface allmulti/promisc handling"). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 19:14:08 +00:00
if (change & IFF_ALLMULTI)
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dev_set_allmulti(conduit,
net: dsa: remove workarounds for changing master promisc/allmulti only while up Lennert Buytenhek explains in commit df02c6ff2e39 ("dsa: fix master interface allmulti/promisc handling"), dated Nov 2008, that changing the promiscuity of interfaces that are down (here the master) is broken. This fact regarding promisc/allmulti has changed since commit b6c40d68ff64 ("net: only invoke dev->change_rx_flags when device is UP") by Vlad Yasevich, dated Nov 2013. Therefore, DSA now has unnecessary complexity to handle master state transitions from down to up. In fact, syncing the unicast and multicast addresses can happen completely asynchronously to the administrative state changes. This change reduces that complexity by effectively fully reverting commit df02c6ff2e39 ("dsa: fix master interface allmulti/promisc handling"). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 19:14:08 +00:00
dev->flags & IFF_ALLMULTI ? 1 : -1);
if (change & IFF_PROMISC)
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dev_set_promiscuity(conduit,
net: dsa: remove workarounds for changing master promisc/allmulti only while up Lennert Buytenhek explains in commit df02c6ff2e39 ("dsa: fix master interface allmulti/promisc handling"), dated Nov 2008, that changing the promiscuity of interfaces that are down (here the master) is broken. This fact regarding promisc/allmulti has changed since commit b6c40d68ff64 ("net: only invoke dev->change_rx_flags when device is UP") by Vlad Yasevich, dated Nov 2013. Therefore, DSA now has unnecessary complexity to handle master state transitions from down to up. In fact, syncing the unicast and multicast addresses can happen completely asynchronously to the administrative state changes. This change reduces that complexity by effectively fully reverting commit df02c6ff2e39 ("dsa: fix master interface allmulti/promisc handling"). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 19:14:08 +00:00
dev->flags & IFF_PROMISC ? 1 : -1);
net: dsa: manage flooding on the CPU ports DSA can treat IFF_PROMISC and IFF_ALLMULTI on standalone user ports as signifying whether packets with an unknown MAC DA will be received or not. Since known MAC DAs are handled by FDB/MDB entries, this means that promiscuity is analogous to including/excluding the CPU port from the flood domain of those packets. There are two ways to signal CPU flooding to drivers. The first (chosen here) is to synthesize a call to ds->ops->port_bridge_flags() for the CPU port, with a mask of BR_FLOOD | BR_MCAST_FLOOD. This has the effect of turning on egress flooding on the CPU port regardless of source. The alternative would be to create a new ds->ops->port_host_flood() which is called per user port. Some switches (sja1105) have a flood domain that is managed per {ingress port, egress port} pair, so it would make more sense for this kind of switch to not flood the CPU from port A if just port B requires it. Nonetheless, the sja1105 has other quirks that prevent it from making use of unicast filtering, and without a concrete user making use of this feature, I chose not to implement it. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 19:14:12 +00:00
if (dsa_switch_supports_uc_filtering(ds) &&
dsa_switch_supports_mc_filtering(ds))
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dsa_user_manage_host_flood(dev);
net: Distributed Switch Architecture protocol support Distributed Switch Architecture is a protocol for managing hardware switch chips. It consists of a set of MII management registers and commands to configure the switch, and an ethernet header format to signal which of the ports of the switch a packet was received from or is intended to be sent to. The switches that this driver supports are typically embedded in access points and routers, and a typical setup with a DSA switch looks something like this: +-----------+ +-----------+ | | RGMII | | | +-------+ +------ 1000baseT MDI ("WAN") | | | 6-port +------ 1000baseT MDI ("LAN1") | CPU | | ethernet +------ 1000baseT MDI ("LAN2") | |MIImgmt| switch +------ 1000baseT MDI ("LAN3") | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4") | | | | +-----------+ +-----------+ The switch driver presents each port on the switch as a separate network interface to Linux, polls the switch to maintain software link state of those ports, forwards MII management interface accesses to those network interfaces (e.g. as done by ethtool) to the switch, and exposes the switch's hardware statistics counters via the appropriate Linux kernel interfaces. This initial patch supports the MII management interface register layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and supports the "Ethertype DSA" packet tagging format. (There is no officially registered ethertype for the Ethertype DSA packet format, so we just grab a random one. The ethertype to use is programmed into the switch, and the switch driver uses the value of ETH_P_EDSA for this, so this define can be changed at any time in the future if the one we chose is allocated to another protocol or if Ethertype DSA gets its own officially registered ethertype, and everything will continue to work.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 13:44:02 +00:00
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static void dsa_user_set_rx_mode(struct net_device *dev)
net: Distributed Switch Architecture protocol support Distributed Switch Architecture is a protocol for managing hardware switch chips. It consists of a set of MII management registers and commands to configure the switch, and an ethernet header format to signal which of the ports of the switch a packet was received from or is intended to be sent to. The switches that this driver supports are typically embedded in access points and routers, and a typical setup with a DSA switch looks something like this: +-----------+ +-----------+ | | RGMII | | | +-------+ +------ 1000baseT MDI ("WAN") | | | 6-port +------ 1000baseT MDI ("LAN1") | CPU | | ethernet +------ 1000baseT MDI ("LAN2") | |MIImgmt| switch +------ 1000baseT MDI ("LAN3") | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4") | | | | +-----------+ +-----------+ The switch driver presents each port on the switch as a separate network interface to Linux, polls the switch to maintain software link state of those ports, forwards MII management interface accesses to those network interfaces (e.g. as done by ethtool) to the switch, and exposes the switch's hardware statistics counters via the appropriate Linux kernel interfaces. This initial patch supports the MII management interface register layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and supports the "Ethertype DSA" packet tagging format. (There is no officially registered ethertype for the Ethertype DSA packet format, so we just grab a random one. The ethertype to use is programmed into the switch, and the switch driver uses the value of ETH_P_EDSA for this, so this define can be changed at any time in the future if the one we chose is allocated to another protocol or if Ethertype DSA gets its own officially registered ethertype, and everything will continue to work.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 13:44:02 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
__dev_mc_sync(dev, dsa_user_sync_mc, dsa_user_unsync_mc);
__dev_uc_sync(dev, dsa_user_sync_uc, dsa_user_unsync_uc);
net: Distributed Switch Architecture protocol support Distributed Switch Architecture is a protocol for managing hardware switch chips. It consists of a set of MII management registers and commands to configure the switch, and an ethernet header format to signal which of the ports of the switch a packet was received from or is intended to be sent to. The switches that this driver supports are typically embedded in access points and routers, and a typical setup with a DSA switch looks something like this: +-----------+ +-----------+ | | RGMII | | | +-------+ +------ 1000baseT MDI ("WAN") | | | 6-port +------ 1000baseT MDI ("LAN1") | CPU | | ethernet +------ 1000baseT MDI ("LAN2") | |MIImgmt| switch +------ 1000baseT MDI ("LAN3") | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4") | | | | +-----------+ +-----------+ The switch driver presents each port on the switch as a separate network interface to Linux, polls the switch to maintain software link state of those ports, forwards MII management interface accesses to those network interfaces (e.g. as done by ethtool) to the switch, and exposes the switch's hardware statistics counters via the appropriate Linux kernel interfaces. This initial patch supports the MII management interface register layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and supports the "Ethertype DSA" packet tagging format. (There is no officially registered ethertype for the Ethertype DSA packet format, so we just grab a random one. The ethertype to use is programmed into the switch, and the switch driver uses the value of ETH_P_EDSA for this, so this define can be changed at any time in the future if the one we chose is allocated to another protocol or if Ethertype DSA gets its own officially registered ethertype, and everything will continue to work.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 13:44:02 +00:00
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_set_mac_address(struct net_device *dev, void *a)
net: Distributed Switch Architecture protocol support Distributed Switch Architecture is a protocol for managing hardware switch chips. It consists of a set of MII management registers and commands to configure the switch, and an ethernet header format to signal which of the ports of the switch a packet was received from or is intended to be sent to. The switches that this driver supports are typically embedded in access points and routers, and a typical setup with a DSA switch looks something like this: +-----------+ +-----------+ | | RGMII | | | +-------+ +------ 1000baseT MDI ("WAN") | | | 6-port +------ 1000baseT MDI ("LAN1") | CPU | | ethernet +------ 1000baseT MDI ("LAN2") | |MIImgmt| switch +------ 1000baseT MDI ("LAN3") | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4") | | | | +-----------+ +-----------+ The switch driver presents each port on the switch as a separate network interface to Linux, polls the switch to maintain software link state of those ports, forwards MII management interface accesses to those network interfaces (e.g. as done by ethtool) to the switch, and exposes the switch's hardware statistics counters via the appropriate Linux kernel interfaces. This initial patch supports the MII management interface register layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and supports the "Ethertype DSA" packet tagging format. (There is no officially registered ethertype for the Ethertype DSA packet format, so we just grab a random one. The ethertype to use is programmed into the switch, and the switch driver uses the value of ETH_P_EDSA for this, so this define can be changed at any time in the future if the one we chose is allocated to another protocol or if Ethertype DSA gets its own officially registered ethertype, and everything will continue to work.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 13:44:02 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct net_device *conduit = dsa_user_to_conduit(dev);
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: install the primary unicast MAC address as standalone port host FDB To be able to safely turn off CPU flooding for standalone ports, we need to ensure that the dev_addr of each DSA slave interface is installed as a standalone host FDB entry for compatible switches. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 19:14:11 +00:00
struct dsa_switch *ds = dp->ds;
dsa: fix master interface allmulti/promisc handling Before commit b6c40d68ff6498b7f63ddf97cf0aa818d748dee7 ("net: only invoke dev->change_rx_flags when device is UP"), the dsa driver could sort-of get away with only fiddling with the master interface's allmulti/promisc counts in ->change_rx_flags() and not touching them in ->open() or ->stop(). After this commit (note that it was merged almost simultaneously with the dsa patches, which is why this wasn't caught initially), the breakage that was already there became more apparent. Since it makes no sense to keep the master interface's allmulti or promisc count pinned for a slave interface that is down, copy the vlan driver's sync logic (which does exactly what we want) over to dsa to fix this. Bug report from Dirk Teurlings <dirk@upexia.nl> and Peter van Valderen <linux@ddcrew.com>. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Tested-by: Peter van Valderen <linux@ddcrew.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-11 05:53:12 +00:00
struct sockaddr *addr = a;
int err;
if (!is_valid_ether_addr(addr->sa_data))
return -EADDRNOTAVAIL;
net: dsa: notify drivers of MAC address changes on user ports In some cases, drivers may need to veto the changing of a MAC address on a user port. Such is the case with KSZ9477 when it offloads a HSR device, because it programs the MAC address of multiple ports to a shared hardware register. Those ports need to have equal MAC addresses for the lifetime of the HSR offload. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-22 13:31:05 +00:00
if (ds->ops->port_set_mac_address) {
err = ds->ops->port_set_mac_address(ds, dp->index,
addr->sa_data);
if (err)
return err;
}
net: dsa: be mostly no-op in dsa_slave_set_mac_address when down Since the slave unicast address is synced to hardware and to the DSA master during dsa_slave_open(), this means that a call to dsa_slave_set_mac_address() while the slave interface is down will result to a call to dsa_port_standalone_host_fdb_del() and to dev_uc_del() for the MAC address while there was no previous dsa_port_standalone_host_fdb_add() or dev_uc_add(). This is a partial revert of the blamed commit below, which was too aggressive. Fixes: 35aae5ab9121 ("net: dsa: remove workarounds for changing master promisc/allmulti only while up") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-08 09:15:13 +00:00
/* If the port is down, the address isn't synced yet to hardware or
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
* to the DSA conduit, so there is nothing to change.
net: dsa: be mostly no-op in dsa_slave_set_mac_address when down Since the slave unicast address is synced to hardware and to the DSA master during dsa_slave_open(), this means that a call to dsa_slave_set_mac_address() while the slave interface is down will result to a call to dsa_port_standalone_host_fdb_del() and to dev_uc_del() for the MAC address while there was no previous dsa_port_standalone_host_fdb_add() or dev_uc_add(). This is a partial revert of the blamed commit below, which was too aggressive. Fixes: 35aae5ab9121 ("net: dsa: remove workarounds for changing master promisc/allmulti only while up") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-08 09:15:13 +00:00
*/
if (!(dev->flags & IFF_UP))
goto out_change_dev_addr;
net: dsa: install the primary unicast MAC address as standalone port host FDB To be able to safely turn off CPU flooding for standalone ports, we need to ensure that the dev_addr of each DSA slave interface is installed as a standalone host FDB entry for compatible switches. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 19:14:11 +00:00
if (dsa_switch_supports_uc_filtering(ds)) {
err = dsa_port_standalone_host_fdb_add(dp, addr->sa_data, 0);
if (err)
return err;
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
if (!ether_addr_equal(addr->sa_data, conduit->dev_addr)) {
err = dev_uc_add(conduit, addr->sa_data);
dsa: fix master interface allmulti/promisc handling Before commit b6c40d68ff6498b7f63ddf97cf0aa818d748dee7 ("net: only invoke dev->change_rx_flags when device is UP"), the dsa driver could sort-of get away with only fiddling with the master interface's allmulti/promisc counts in ->change_rx_flags() and not touching them in ->open() or ->stop(). After this commit (note that it was merged almost simultaneously with the dsa patches, which is why this wasn't caught initially), the breakage that was already there became more apparent. Since it makes no sense to keep the master interface's allmulti or promisc count pinned for a slave interface that is down, copy the vlan driver's sync logic (which does exactly what we want) over to dsa to fix this. Bug report from Dirk Teurlings <dirk@upexia.nl> and Peter van Valderen <linux@ddcrew.com>. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Tested-by: Peter van Valderen <linux@ddcrew.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-11 05:53:12 +00:00
if (err < 0)
net: dsa: install the primary unicast MAC address as standalone port host FDB To be able to safely turn off CPU flooding for standalone ports, we need to ensure that the dev_addr of each DSA slave interface is installed as a standalone host FDB entry for compatible switches. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 19:14:11 +00:00
goto del_unicast;
dsa: fix master interface allmulti/promisc handling Before commit b6c40d68ff6498b7f63ddf97cf0aa818d748dee7 ("net: only invoke dev->change_rx_flags when device is UP"), the dsa driver could sort-of get away with only fiddling with the master interface's allmulti/promisc counts in ->change_rx_flags() and not touching them in ->open() or ->stop(). After this commit (note that it was merged almost simultaneously with the dsa patches, which is why this wasn't caught initially), the breakage that was already there became more apparent. Since it makes no sense to keep the master interface's allmulti or promisc count pinned for a slave interface that is down, copy the vlan driver's sync logic (which does exactly what we want) over to dsa to fix this. Bug report from Dirk Teurlings <dirk@upexia.nl> and Peter van Valderen <linux@ddcrew.com>. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Tested-by: Peter van Valderen <linux@ddcrew.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-11 05:53:12 +00:00
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
if (!ether_addr_equal(dev->dev_addr, conduit->dev_addr))
dev_uc_del(conduit, dev->dev_addr);
dsa: fix master interface allmulti/promisc handling Before commit b6c40d68ff6498b7f63ddf97cf0aa818d748dee7 ("net: only invoke dev->change_rx_flags when device is UP"), the dsa driver could sort-of get away with only fiddling with the master interface's allmulti/promisc counts in ->change_rx_flags() and not touching them in ->open() or ->stop(). After this commit (note that it was merged almost simultaneously with the dsa patches, which is why this wasn't caught initially), the breakage that was already there became more apparent. Since it makes no sense to keep the master interface's allmulti or promisc count pinned for a slave interface that is down, copy the vlan driver's sync logic (which does exactly what we want) over to dsa to fix this. Bug report from Dirk Teurlings <dirk@upexia.nl> and Peter van Valderen <linux@ddcrew.com>. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Tested-by: Peter van Valderen <linux@ddcrew.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-11 05:53:12 +00:00
net: dsa: install the primary unicast MAC address as standalone port host FDB To be able to safely turn off CPU flooding for standalone ports, we need to ensure that the dev_addr of each DSA slave interface is installed as a standalone host FDB entry for compatible switches. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 19:14:11 +00:00
if (dsa_switch_supports_uc_filtering(ds))
dsa_port_standalone_host_fdb_del(dp, dev->dev_addr, 0);
net: dsa: be mostly no-op in dsa_slave_set_mac_address when down Since the slave unicast address is synced to hardware and to the DSA master during dsa_slave_open(), this means that a call to dsa_slave_set_mac_address() while the slave interface is down will result to a call to dsa_port_standalone_host_fdb_del() and to dev_uc_del() for the MAC address while there was no previous dsa_port_standalone_host_fdb_add() or dev_uc_add(). This is a partial revert of the blamed commit below, which was too aggressive. Fixes: 35aae5ab9121 ("net: dsa: remove workarounds for changing master promisc/allmulti only while up") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-08 09:15:13 +00:00
out_change_dev_addr:
net: use eth_hw_addr_set() instead of ether_addr_copy() Convert from ether_addr_copy() to eth_hw_addr_set(): @@ expression dev, np; @@ - ether_addr_copy(dev->dev_addr, np) + eth_hw_addr_set(dev, np) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-01 21:32:22 +00:00
eth_hw_addr_set(dev, addr->sa_data);
net: Distributed Switch Architecture protocol support Distributed Switch Architecture is a protocol for managing hardware switch chips. It consists of a set of MII management registers and commands to configure the switch, and an ethernet header format to signal which of the ports of the switch a packet was received from or is intended to be sent to. The switches that this driver supports are typically embedded in access points and routers, and a typical setup with a DSA switch looks something like this: +-----------+ +-----------+ | | RGMII | | | +-------+ +------ 1000baseT MDI ("WAN") | | | 6-port +------ 1000baseT MDI ("LAN1") | CPU | | ethernet +------ 1000baseT MDI ("LAN2") | |MIImgmt| switch +------ 1000baseT MDI ("LAN3") | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4") | | | | +-----------+ +-----------+ The switch driver presents each port on the switch as a separate network interface to Linux, polls the switch to maintain software link state of those ports, forwards MII management interface accesses to those network interfaces (e.g. as done by ethtool) to the switch, and exposes the switch's hardware statistics counters via the appropriate Linux kernel interfaces. This initial patch supports the MII management interface register layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and supports the "Ethertype DSA" packet tagging format. (There is no officially registered ethertype for the Ethertype DSA packet format, so we just grab a random one. The ethertype to use is programmed into the switch, and the switch driver uses the value of ETH_P_EDSA for this, so this define can be changed at any time in the future if the one we chose is allocated to another protocol or if Ethertype DSA gets its own officially registered ethertype, and everything will continue to work.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 13:44:02 +00:00
return 0;
net: dsa: install the primary unicast MAC address as standalone port host FDB To be able to safely turn off CPU flooding for standalone ports, we need to ensure that the dev_addr of each DSA slave interface is installed as a standalone host FDB entry for compatible switches. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 19:14:11 +00:00
del_unicast:
if (dsa_switch_supports_uc_filtering(ds))
dsa_port_standalone_host_fdb_del(dp, addr->sa_data, 0);
return err;
net: Distributed Switch Architecture protocol support Distributed Switch Architecture is a protocol for managing hardware switch chips. It consists of a set of MII management registers and commands to configure the switch, and an ethernet header format to signal which of the ports of the switch a packet was received from or is intended to be sent to. The switches that this driver supports are typically embedded in access points and routers, and a typical setup with a DSA switch looks something like this: +-----------+ +-----------+ | | RGMII | | | +-------+ +------ 1000baseT MDI ("WAN") | | | 6-port +------ 1000baseT MDI ("LAN1") | CPU | | ethernet +------ 1000baseT MDI ("LAN2") | |MIImgmt| switch +------ 1000baseT MDI ("LAN3") | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4") | | | | +-----------+ +-----------+ The switch driver presents each port on the switch as a separate network interface to Linux, polls the switch to maintain software link state of those ports, forwards MII management interface accesses to those network interfaces (e.g. as done by ethtool) to the switch, and exposes the switch's hardware statistics counters via the appropriate Linux kernel interfaces. This initial patch supports the MII management interface register layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and supports the "Ethertype DSA" packet tagging format. (There is no officially registered ethertype for the Ethertype DSA packet format, so we just grab a random one. The ethertype to use is programmed into the switch, and the switch driver uses the value of ETH_P_EDSA for this, so this define can be changed at any time in the future if the one we chose is allocated to another protocol or if Ethertype DSA gets its own officially registered ethertype, and everything will continue to work.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 13:44:02 +00:00
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_user_dump_ctx {
net: dsa: Move FDB dump implementation inside DSA >From all switchdev devices only DSA requires special FDB dump. This is due to lack of ability for syncing the hardware learned FDBs with the bridge. Due to this it is removed from switchdev and moved inside DSA. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06 13:15:49 +00:00
struct net_device *dev;
struct sk_buff *skb;
struct netlink_callback *cb;
int idx;
};
static int
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dsa_user_port_fdb_do_dump(const unsigned char *addr, u16 vid,
bool is_static, void *data)
net: dsa: Move FDB dump implementation inside DSA >From all switchdev devices only DSA requires special FDB dump. This is due to lack of ability for syncing the hardware learned FDBs with the bridge. Due to this it is removed from switchdev and moved inside DSA. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06 13:15:49 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_user_dump_ctx *dump = data;
net: dsa: Move FDB dump implementation inside DSA >From all switchdev devices only DSA requires special FDB dump. This is due to lack of ability for syncing the hardware learned FDBs with the bridge. Due to this it is removed from switchdev and moved inside DSA. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06 13:15:49 +00:00
u32 portid = NETLINK_CB(dump->cb->skb).portid;
u32 seq = dump->cb->nlh->nlmsg_seq;
struct nlmsghdr *nlh;
struct ndmsg *ndm;
if (dump->idx < dump->cb->args[2])
goto skip;
nlh = nlmsg_put(dump->skb, portid, seq, RTM_NEWNEIGH,
sizeof(*ndm), NLM_F_MULTI);
if (!nlh)
return -EMSGSIZE;
ndm = nlmsg_data(nlh);
ndm->ndm_family = AF_BRIDGE;
ndm->ndm_pad1 = 0;
ndm->ndm_pad2 = 0;
ndm->ndm_flags = NTF_SELF;
ndm->ndm_type = 0;
ndm->ndm_ifindex = dump->dev->ifindex;
ndm->ndm_state = is_static ? NUD_NOARP : NUD_REACHABLE;
if (nla_put(dump->skb, NDA_LLADDR, ETH_ALEN, addr))
goto nla_put_failure;
if (vid && nla_put_u16(dump->skb, NDA_VLAN, vid))
goto nla_put_failure;
nlmsg_end(dump->skb, nlh);
skip:
dump->idx++;
return 0;
nla_put_failure:
nlmsg_cancel(dump->skb, nlh);
return -EMSGSIZE;
}
static int
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dsa_user_fdb_dump(struct sk_buff *skb, struct netlink_callback *cb,
struct net_device *dev, struct net_device *filter_dev,
int *idx)
net: dsa: Move FDB dump implementation inside DSA >From all switchdev devices only DSA requires special FDB dump. This is due to lack of ability for syncing the hardware learned FDBs with the bridge. Due to this it is removed from switchdev and moved inside DSA. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06 13:15:49 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
struct dsa_user_dump_ctx dump = {
net: dsa: Move FDB dump implementation inside DSA >From all switchdev devices only DSA requires special FDB dump. This is due to lack of ability for syncing the hardware learned FDBs with the bridge. Due to this it is removed from switchdev and moved inside DSA. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06 13:15:49 +00:00
.dev = dev,
.skb = skb,
.cb = cb,
.idx = *idx,
};
int err;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
err = dsa_port_fdb_dump(dp, dsa_user_port_fdb_do_dump, &dump);
net: dsa: Move FDB dump implementation inside DSA >From all switchdev devices only DSA requires special FDB dump. This is due to lack of ability for syncing the hardware learned FDBs with the bridge. Due to this it is removed from switchdev and moved inside DSA. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06 13:15:49 +00:00
*idx = dump.idx;
net: dsa: add port fdb dump Dumping a DSA port's FDB entries is not specific to a DSA slave, so add a dsa_port_fdb_dump function, similarly to dsa_port_fdb_add and dsa_port_fdb_del. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20 23:32:14 +00:00
net: dsa: Move FDB dump implementation inside DSA >From all switchdev devices only DSA requires special FDB dump. This is due to lack of ability for syncing the hardware learned FDBs with the bridge. Due to this it is removed from switchdev and moved inside DSA. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06 13:15:49 +00:00
return err;
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
net: Distributed Switch Architecture protocol support Distributed Switch Architecture is a protocol for managing hardware switch chips. It consists of a set of MII management registers and commands to configure the switch, and an ethernet header format to signal which of the ports of the switch a packet was received from or is intended to be sent to. The switches that this driver supports are typically embedded in access points and routers, and a typical setup with a DSA switch looks something like this: +-----------+ +-----------+ | | RGMII | | | +-------+ +------ 1000baseT MDI ("WAN") | | | 6-port +------ 1000baseT MDI ("LAN1") | CPU | | ethernet +------ 1000baseT MDI ("LAN2") | |MIImgmt| switch +------ 1000baseT MDI ("LAN3") | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4") | | | | +-----------+ +-----------+ The switch driver presents each port on the switch as a separate network interface to Linux, polls the switch to maintain software link state of those ports, forwards MII management interface accesses to those network interfaces (e.g. as done by ethtool) to the switch, and exposes the switch's hardware statistics counters via the appropriate Linux kernel interfaces. This initial patch supports the MII management interface register layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and supports the "Ethertype DSA" packet tagging format. (There is no officially registered ethertype for the Ethertype DSA packet format, so we just grab a random one. The ethertype to use is programmed into the switch, and the switch driver uses the value of ETH_P_EDSA for this, so this define can be changed at any time in the future if the one we chose is allocated to another protocol or if Ethertype DSA gets its own officially registered ethertype, and everything will continue to work.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 13:44:02 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_user_priv *p = netdev_priv(dev);
net: dsa: forward hardware timestamping ioctls to switch driver This patch adds support to the dsa slave network device so that switch drivers can implement the SIOC[GS]HWTSTAMP ioctls and the ethtool timestamp-info interface. Signed-off-by: Brandon Streiff <brandon.streiff@ni.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-14 00:07:48 +00:00
struct dsa_switch *ds = p->dp->ds;
int port = p->dp->index;
/* Pass through to switch driver if it supports timestamping */
switch (cmd) {
case SIOCGHWTSTAMP:
if (ds->ops->port_hwtstamp_get)
return ds->ops->port_hwtstamp_get(ds, port, ifr);
break;
case SIOCSHWTSTAMP:
if (ds->ops->port_hwtstamp_set)
return ds->ops->port_hwtstamp_set(ds, port, ifr);
break;
}
net: dsa: Plug in PHYLINK support Add support for PHYLINK within the DSA subsystem in order to support more complex devices such as pluggable (SFP) and non-pluggable (SFF) modules, 10G PHYs, and traditional PHYs. Using PHYLINK allows us to drop some amount of complexity we had while probing fixed and non-fixed PHYs using Device Tree. Because PHYLINK separates the Ethernet MAC/port configuration into different stages, we let switch drivers implement those, and for now, we maintain functionality by calling dsa_slave_adjust_link() during phylink_mac_link_{up,down} which provides semantically equivalent steps. Drivers willing to take advantage of PHYLINK should implement the phylink_mac_* operations that DSA wraps. We cannot quite remove the adjust_link() callback just yet, because a number of drivers rely on that for configuring their "CPU" and "DSA" ports, this is done dsa_port_setup_phy_of() and dsa_port_fixed_link_register_of() still. Drivers that utilize fixed links for user-facing ports (e.g: bcm_sf2) will need to implement phylink_mac_ops from now on to preserve functionality, since PHYLINK *does not* create a phy_device instance for fixed links. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 20:17:36 +00:00
return phylink_mii_ioctl(p->dp->pl, ifr, cmd);
net: Distributed Switch Architecture protocol support Distributed Switch Architecture is a protocol for managing hardware switch chips. It consists of a set of MII management registers and commands to configure the switch, and an ethernet header format to signal which of the ports of the switch a packet was received from or is intended to be sent to. The switches that this driver supports are typically embedded in access points and routers, and a typical setup with a DSA switch looks something like this: +-----------+ +-----------+ | | RGMII | | | +-------+ +------ 1000baseT MDI ("WAN") | | | 6-port +------ 1000baseT MDI ("LAN1") | CPU | | ethernet +------ 1000baseT MDI ("LAN2") | |MIImgmt| switch +------ 1000baseT MDI ("LAN3") | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4") | | | | +-----------+ +-----------+ The switch driver presents each port on the switch as a separate network interface to Linux, polls the switch to maintain software link state of those ports, forwards MII management interface accesses to those network interfaces (e.g. as done by ethtool) to the switch, and exposes the switch's hardware statistics counters via the appropriate Linux kernel interfaces. This initial patch supports the MII management interface register layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and supports the "Ethertype DSA" packet tagging format. (There is no officially registered ethertype for the Ethertype DSA packet format, so we just grab a random one. The ethertype to use is programmed into the switch, and the switch driver uses the value of ETH_P_EDSA for this, so this define can be changed at any time in the future if the one we chose is allocated to another protocol or if Ethertype DSA gets its own officially registered ethertype, and everything will continue to work.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 13:44:02 +00:00
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_port_attr_set(struct net_device *dev, const void *ctx,
const struct switchdev_attr *attr,
struct netlink_ext_ack *extack)
switchdev: convert STP update to switchdev attr set STP update is just a settable port attribute, so convert switchdev_port_stp_update to an attr set. For DSA, the prepare phase is skipped and STP updates are only done in the commit phase. This is because currently the DSA drivers don't need to allocate any memory for STP updates and the STP update will not fail to HW (unless something horrible goes wrong on the MDIO bus, in which case the prepare phase wouldn't have been able to predict anyway). Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-10 16:47:51 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: fix preparation of a port STP update Because of the default 0 value of ret in dsa_slave_port_attr_set, a driver may return -EOPNOTSUPP from the commit phase of a STP state, which triggers a WARN() from switchdev. This happened on a 6185 switch which does not support hardware bridging. Reported-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-29 16:38:36 +00:00
int ret;
switchdev: convert STP update to switchdev attr set STP update is just a settable port attribute, so convert switchdev_port_stp_update to an attr set. For DSA, the prepare phase is skipped and STP updates are only done in the commit phase. This is because currently the DSA drivers don't need to allocate any memory for STP updates and the STP update will not fail to HW (unless something horrible goes wrong on the MDIO bus, in which case the prepare phase wouldn't have been able to predict anyway). Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-10 16:47:51 +00:00
net: bridge: ignore switchdev events for LAG ports which didn't request replay There is a slight inconvenience in the switchdev replay helpers added recently, and this is when: ip link add br0 type bridge ip link add bond0 type bond ip link set bond0 master br0 bridge vlan add dev bond0 vid 100 ip link set swp0 master bond0 ip link set swp1 master bond0 Since the underlying driver (currently only DSA) asks for a replay of VLANs when swp0 and swp1 join the LAG because it is bridged, what will happen is that DSA will try to react twice on the VLAN event for swp0. This is not really a huge problem right now, because most drivers accept duplicates since the bridge itself does, but it will become a problem when we add support for replaying switchdev object deletions. Let's fix this by adding a blank void *ctx in the replay helpers, which will be passed on by the bridge in the switchdev notifications. If the context is NULL, everything is the same as before. But if the context is populated with a valid pointer, the underlying switchdev driver (currently DSA) can use the pointer to 'see through' the bridge port (which in the example above is bond0) and 'know' that the event is only for a particular physical port offloading that bridge port, and not for all of them. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-27 11:54:25 +00:00
if (ctx && ctx != dp)
return 0;
switchdev: convert STP update to switchdev attr set STP update is just a settable port attribute, so convert switchdev_port_stp_update to an attr set. For DSA, the prepare phase is skipped and STP updates are only done in the commit phase. This is because currently the DSA drivers don't need to allocate any memory for STP updates and the STP update will not fail to HW (unless something horrible goes wrong on the MDIO bus, in which case the prepare phase wouldn't have been able to predict anyway). Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-10 16:47:51 +00:00
switch (attr->id) {
switchdev: rename SWITCHDEV_ATTR_* enum values to SWITCHDEV_ATTR_ID_* To be aligned with obj. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 09:03:42 +00:00
case SWITCHDEV_ATTR_ID_PORT_STP_STATE:
net: dsa: fix switchdev objects on bridge master mistakenly being applied on ports Tobias reports that after the blamed patch, VLAN objects being added to a bridge device are being added to all slave ports instead (swp2, swp3). ip link add br0 type bridge vlan_filtering 1 ip link set swp2 master br0 ip link set swp3 master br0 bridge vlan add dev br0 vid 100 self This is because the fix was too broad: we made dsa_port_offloads_netdev say "yes, I offload the br0 bridge" for all slave ports, but we didn't add the checks whether the switchdev object was in fact meant for the physical port or for the bridge itself. So we are reacting on events in a way in which we shouldn't. The reason why the fix was too broad is because the question itself, "does this DSA port offload this netdev", was too broad in the first place. The solution is to disambiguate the question and separate it into two different functions, one to be called for each switchdev attribute / object that has an orig_dev == net_bridge (dsa_port_offloads_bridge), and the other for orig_dev == net_bridge_port (*_offloads_bridge_port). In the case of VLAN objects on the bridge interface, this solves the problem because we know that VLAN objects are per bridge port and not per bridge. And when orig_dev is equal to the net_bridge, we offload it as a bridge, but not as a bridge port; that's how we are able to skip reacting on those events. Note that this is compatible with future plans to have explicit offloading of VLAN objects on the bridge interface as a bridge port (in DSA, this signifies that we should add that VLAN towards the CPU port). Fixes: 99b8202b179f ("net: dsa: fix SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING getting ignored") Reported-by: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com> Tested-by: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-07 10:21:56 +00:00
if (!dsa_port_offloads_bridge_port(dp, attr->orig_dev))
return -EOPNOTSUPP;
net: dsa: don't fast age standalone ports DSA drives the procedure to flush dynamic FDB entries from a port based on the change of STP state: whenever we go from a state where address learning is enabled (LEARNING, FORWARDING) to a state where it isn't (LISTENING, BLOCKING, DISABLED), we need to flush the existing dynamic entries. However, there are cases when this is not needed. Internally, when a DSA switch interface is not under a bridge, DSA still keeps it in the "FORWARDING" STP state. And when that interface joins a bridge, the bridge will meticulously iterate that port through all STP states, starting with BLOCKING and ending with FORWARDING. Because there is a state transition from the standalone version of FORWARDING into the temporary BLOCKING bridge port state, DSA calls the fast age procedure. Since commit 5e38c15856e9 ("net: dsa: configure better brport flags when ports leave the bridge"), DSA asks standalone ports to disable address learning. Therefore, there can be no dynamic FDB entries on a standalone port. Therefore, it does not make sense to flush dynamic FDB entries on one. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-08 11:16:37 +00:00
ret = dsa_port_set_state(dp, attr->u.stp_state, true);
switchdev: convert STP update to switchdev attr set STP update is just a settable port attribute, so convert switchdev_port_stp_update to an attr set. For DSA, the prepare phase is skipped and STP updates are only done in the commit phase. This is because currently the DSA drivers don't need to allocate any memory for STP updates and the STP update will not fail to HW (unless something horrible goes wrong on the MDIO bus, in which case the prepare phase wouldn't have been able to predict anyway). Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-10 16:47:51 +00:00
break;
net: dsa: Handle MST state changes Add the usual trampoline functionality from the generic DSA layer down to the drivers for MST state changes. When a state changes to disabled/blocking/listening, make sure to fast age any dynamic entries in the affected VLANs (those controlled by the MSTI in question). Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-16 15:08:54 +00:00
case SWITCHDEV_ATTR_ID_PORT_MST_STATE:
if (!dsa_port_offloads_bridge_port(dp, attr->orig_dev))
return -EOPNOTSUPP;
ret = dsa_port_set_mst_state(dp, &attr->u.mst_state, extack);
break;
net: dsa: support VLAN filtering switchdev attr When a user explicitly requests VLAN filtering with something like: # echo 1 > /sys/class/net/<bridge>/bridge/vlan_filtering Switchdev propagates a SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING port attribute. Add support for it in the DSA layer with a new port_vlan_filtering function to let drivers toggle 802.1Q filtering on user demand. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-26 18:16:00 +00:00
case SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING:
net: dsa: rename dsa_port_offloads_bridge to dsa_port_offloads_bridge_dev Currently the majority of dsa_port_bridge_dev_get() calls in drivers is just to check whether a port is under the bridge device provided as argument by the DSA API. We'd like to change that DSA API so that a more complex structure is provided as argument. To keep things more generic, and considering that the new complex structure will be provided by value and not by reference, direct comparisons between dp->bridge and the provided bridge will be broken. The generic way to do the checking would simply be to do something like dsa_port_offloads_bridge(dp, &bridge). But there's a problem, we already have a function named that way, which actually takes a bridge_dev net_device as argument. Rename it so that we can use dsa_port_offloads_bridge for something else. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-06 16:57:54 +00:00
if (!dsa_port_offloads_bridge_dev(dp, attr->orig_dev))
net: dsa: fix switchdev objects on bridge master mistakenly being applied on ports Tobias reports that after the blamed patch, VLAN objects being added to a bridge device are being added to all slave ports instead (swp2, swp3). ip link add br0 type bridge vlan_filtering 1 ip link set swp2 master br0 ip link set swp3 master br0 bridge vlan add dev br0 vid 100 self This is because the fix was too broad: we made dsa_port_offloads_netdev say "yes, I offload the br0 bridge" for all slave ports, but we didn't add the checks whether the switchdev object was in fact meant for the physical port or for the bridge itself. So we are reacting on events in a way in which we shouldn't. The reason why the fix was too broad is because the question itself, "does this DSA port offload this netdev", was too broad in the first place. The solution is to disambiguate the question and separate it into two different functions, one to be called for each switchdev attribute / object that has an orig_dev == net_bridge (dsa_port_offloads_bridge), and the other for orig_dev == net_bridge_port (*_offloads_bridge_port). In the case of VLAN objects on the bridge interface, this solves the problem because we know that VLAN objects are per bridge port and not per bridge. And when orig_dev is equal to the net_bridge, we offload it as a bridge, but not as a bridge port; that's how we are able to skip reacting on those events. Note that this is compatible with future plans to have explicit offloading of VLAN objects on the bridge interface as a bridge port (in DSA, this signifies that we should add that VLAN towards the CPU port). Fixes: 99b8202b179f ("net: dsa: fix SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING getting ignored") Reported-by: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com> Tested-by: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-07 10:21:56 +00:00
return -EOPNOTSUPP;
net: dsa: propagate extack to .port_vlan_filtering Some drivers can't dynamically change the VLAN filtering option, or impose some restrictions, it would be nice to propagate this info through netlink instead of printing it to a kernel log that might never be read. Also netlink extack includes the module that emitted the message, which means that it's easier to figure out which ones are driver-generated errors as opposed to command misuse. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-13 20:43:19 +00:00
ret = dsa_port_vlan_filtering(dp, attr->u.vlan_filtering,
extack);
net: dsa: support VLAN filtering switchdev attr When a user explicitly requests VLAN filtering with something like: # echo 1 > /sys/class/net/<bridge>/bridge/vlan_filtering Switchdev propagates a SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING port attribute. Add support for it in the DSA layer with a new port_vlan_filtering function to let drivers toggle 802.1Q filtering on user demand. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-26 18:16:00 +00:00
break;
net: dsa: support switchdev ageing time attr Add a new function for DSA drivers to handle the switchdev SWITCHDEV_ATTR_ID_BRIDGE_AGEING_TIME attribute. The ageing time is passed as milliseconds. Also because we can have multiple logical bridges on top of a physical switch and ageing time are switch-wide, call the driver function with the fastest ageing time in use on the chip instead of the requested one. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19 00:45:38 +00:00
case SWITCHDEV_ATTR_ID_BRIDGE_AGEING_TIME:
net: dsa: rename dsa_port_offloads_bridge to dsa_port_offloads_bridge_dev Currently the majority of dsa_port_bridge_dev_get() calls in drivers is just to check whether a port is under the bridge device provided as argument by the DSA API. We'd like to change that DSA API so that a more complex structure is provided as argument. To keep things more generic, and considering that the new complex structure will be provided by value and not by reference, direct comparisons between dp->bridge and the provided bridge will be broken. The generic way to do the checking would simply be to do something like dsa_port_offloads_bridge(dp, &bridge). But there's a problem, we already have a function named that way, which actually takes a bridge_dev net_device as argument. Rename it so that we can use dsa_port_offloads_bridge for something else. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-06 16:57:54 +00:00
if (!dsa_port_offloads_bridge_dev(dp, attr->orig_dev))
net: dsa: fix switchdev objects on bridge master mistakenly being applied on ports Tobias reports that after the blamed patch, VLAN objects being added to a bridge device are being added to all slave ports instead (swp2, swp3). ip link add br0 type bridge vlan_filtering 1 ip link set swp2 master br0 ip link set swp3 master br0 bridge vlan add dev br0 vid 100 self This is because the fix was too broad: we made dsa_port_offloads_netdev say "yes, I offload the br0 bridge" for all slave ports, but we didn't add the checks whether the switchdev object was in fact meant for the physical port or for the bridge itself. So we are reacting on events in a way in which we shouldn't. The reason why the fix was too broad is because the question itself, "does this DSA port offload this netdev", was too broad in the first place. The solution is to disambiguate the question and separate it into two different functions, one to be called for each switchdev attribute / object that has an orig_dev == net_bridge (dsa_port_offloads_bridge), and the other for orig_dev == net_bridge_port (*_offloads_bridge_port). In the case of VLAN objects on the bridge interface, this solves the problem because we know that VLAN objects are per bridge port and not per bridge. And when orig_dev is equal to the net_bridge, we offload it as a bridge, but not as a bridge port; that's how we are able to skip reacting on those events. Note that this is compatible with future plans to have explicit offloading of VLAN objects on the bridge interface as a bridge port (in DSA, this signifies that we should add that VLAN towards the CPU port). Fixes: 99b8202b179f ("net: dsa: fix SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING getting ignored") Reported-by: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com> Tested-by: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-07 10:21:56 +00:00
return -EOPNOTSUPP;
net: switchdev: remove the transaction structure from port attributes Since the introduction of the switchdev API, port attributes were transmitted to drivers for offloading using a two-step transactional model, with a prepare phase that was supposed to catch all errors, and a commit phase that was supposed to never fail. Some classes of failures can never be avoided, like hardware access, or memory allocation. In the latter case, merely attempting to move the memory allocation to the preparation phase makes it impossible to avoid memory leaks, since commit 91cf8eceffc1 ("switchdev: Remove unused transaction item queue") which has removed the unused mechanism of passing on the allocated memory between one phase and another. It is time we admit that separating the preparation from the commit phase is something that is best left for the driver to decide, and not something that should be baked into the API, especially since there are no switchdev callers that depend on this. This patch removes the struct switchdev_trans member from switchdev port attribute notifier structures, and converts drivers to not look at this member. In part, this patch contains a revert of my previous commit 2e554a7a5d8a ("net: dsa: propagate switchdev vlan_filtering prepare phase to drivers"). For the most part, the conversion was trivial except for: - Rocker's world implementation based on Broadcom OF-DPA had an odd implementation of ofdpa_port_attr_bridge_flags_set. The conversion was done mechanically, by pasting the implementation twice, then only keeping the code that would get executed during prepare phase on top, then only keeping the code that gets executed during the commit phase on bottom, then simplifying the resulting code until this was obtained. - DSA's offloading of STP state, bridge flags, VLAN filtering and multicast router could be converted right away. But the ageing time could not, so a shim was introduced and this was left for a further commit. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> # hellcreek Reviewed-by: Linus Walleij <linus.walleij@linaro.org> # RTL8366RB Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-09 00:01:50 +00:00
ret = dsa_port_ageing_time(dp, attr->u.ageing_time);
net: dsa: support switchdev ageing time attr Add a new function for DSA drivers to handle the switchdev SWITCHDEV_ATTR_ID_BRIDGE_AGEING_TIME attribute. The ageing time is passed as milliseconds. Also because we can have multiple logical bridges on top of a physical switch and ageing time are switch-wide, call the driver function with the fastest ageing time in use on the chip instead of the requested one. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19 00:45:38 +00:00
break;
net: dsa: Validate hardware support for MST When joining a bridge where MST is enabled, we validate that the proper offloading support is in place, otherwise we fallback to software bridging. When then mode is changed on a bridge in which we are members, we refuse the change if offloading is not supported. At the moment we only check for configurable learning, but this will be further restricted as we support more MST related switchdev events. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-16 15:08:52 +00:00
case SWITCHDEV_ATTR_ID_BRIDGE_MST:
if (!dsa_port_offloads_bridge_dev(dp, attr->orig_dev))
return -EOPNOTSUPP;
ret = dsa_port_mst_enable(dp, attr->u.mst, extack);
break;
net: dsa: Add setter for SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS In preparation for removing SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS_SUPPORT, add support for a function that processes the SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS and SWITCHDEV_ATTR_ID_PORT_PRE_BRIDGE_FLAGS attributes and returns not supported for any flag set, since DSA does not currently support toggling those bridge port attributes (yet). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21 00:58:22 +00:00
case SWITCHDEV_ATTR_ID_PORT_PRE_BRIDGE_FLAGS:
net: dsa: fix switchdev objects on bridge master mistakenly being applied on ports Tobias reports that after the blamed patch, VLAN objects being added to a bridge device are being added to all slave ports instead (swp2, swp3). ip link add br0 type bridge vlan_filtering 1 ip link set swp2 master br0 ip link set swp3 master br0 bridge vlan add dev br0 vid 100 self This is because the fix was too broad: we made dsa_port_offloads_netdev say "yes, I offload the br0 bridge" for all slave ports, but we didn't add the checks whether the switchdev object was in fact meant for the physical port or for the bridge itself. So we are reacting on events in a way in which we shouldn't. The reason why the fix was too broad is because the question itself, "does this DSA port offload this netdev", was too broad in the first place. The solution is to disambiguate the question and separate it into two different functions, one to be called for each switchdev attribute / object that has an orig_dev == net_bridge (dsa_port_offloads_bridge), and the other for orig_dev == net_bridge_port (*_offloads_bridge_port). In the case of VLAN objects on the bridge interface, this solves the problem because we know that VLAN objects are per bridge port and not per bridge. And when orig_dev is equal to the net_bridge, we offload it as a bridge, but not as a bridge port; that's how we are able to skip reacting on those events. Note that this is compatible with future plans to have explicit offloading of VLAN objects on the bridge interface as a bridge port (in DSA, this signifies that we should add that VLAN towards the CPU port). Fixes: 99b8202b179f ("net: dsa: fix SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING getting ignored") Reported-by: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com> Tested-by: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-07 10:21:56 +00:00
if (!dsa_port_offloads_bridge_port(dp, attr->orig_dev))
return -EOPNOTSUPP;
net: dsa: act as passthrough for bridge port flags There are multiple ways in which a PORT_BRIDGE_FLAGS attribute can be expressed by the bridge through switchdev, and not all of them can be emulated by DSA mid-layer API at the same time. One possible configuration is when the bridge offloads the port flags using a mask that has a single bit set - therefore only one feature should change. However, DSA currently groups together unicast and multicast flooding in the .port_egress_floods method, which limits our options when we try to add support for turning off broadcast flooding: do we extend .port_egress_floods with a third parameter which b53 and mv88e6xxx will ignore? But that means that the DSA layer, which currently implements the PRE_BRIDGE_FLAGS attribute all by itself, will see that .port_egress_floods is implemented, and will report that all 3 types of flooding are supported - not necessarily true. Another configuration is when the user specifies more than one flag at the same time, in the same netlink message. If we were to create one individual function per offloadable bridge port flag, we would limit the expressiveness of the switch driver of refusing certain combinations of flag values. For example, a switch may not have an explicit knob for flooding of unknown multicast, just for flooding in general. In that case, the only correct thing to do is to allow changes to BR_FLOOD and BR_MCAST_FLOOD in tandem, and never allow mismatched values. But having a separate .port_set_unicast_flood and .port_set_multicast_flood would not allow the driver to possibly reject that. Also, DSA doesn't consider it necessary to inform the driver that a SWITCHDEV_ATTR_ID_BRIDGE_MROUTER attribute was offloaded, because it just calls .port_egress_floods for the CPU port. When we'll add support for the plain SWITCHDEV_ATTR_ID_PORT_MROUTER, that will become a real problem because the flood settings will need to be held statefully in the DSA middle layer, otherwise changing the mrouter port attribute will impact the flooding attribute. And that's _assuming_ that the underlying hardware doesn't have anything else to do when a multicast router attaches to a port than flood unknown traffic to it. If it does, there will need to be a dedicated .port_set_mrouter anyway. So we need to let the DSA drivers see the exact form that the bridge passes this switchdev attribute in, otherwise we are standing in the way. Therefore we also need to use this form of language when communicating to the driver that it needs to configure its initial (before bridge join) and final (after bridge leave) port flags. The b53 and mv88e6xxx drivers are converted to the passthrough API and their implementation of .port_egress_floods is split into two: a function that configures unicast flooding and another for multicast. The mv88e6xxx implementation is quite hairy, and it turns out that the implementations of unknown unicast flooding are actually the same for 6185 and for 6352: behind the confusing names actually lie two individual bits: NO_UNKNOWN_MC -> FLOOD_UC = 0x4 = BIT(2) NO_UNKNOWN_UC -> FLOOD_MC = 0x8 = BIT(3) so there was no reason to entangle them in the first place. Whereas the 6185 writes to MV88E6185_PORT_CTL0_FORWARD_UNKNOWN of PORT_CTL0, which has the exact same bit index. I have left the implementations separate though, for the only reason that the names are different enough to confuse me, since I am not able to double-check with a user manual. The multicast flooding setting for 6185 is in a different register than for 6352 though. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12 15:15:56 +00:00
ret = dsa_port_pre_bridge_flags(dp, attr->u.brport_flags,
extack);
net: dsa: Add setter for SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS In preparation for removing SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS_SUPPORT, add support for a function that processes the SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS and SWITCHDEV_ATTR_ID_PORT_PRE_BRIDGE_FLAGS attributes and returns not supported for any flag set, since DSA does not currently support toggling those bridge port attributes (yet). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21 00:58:22 +00:00
break;
net: dsa: add support for bridge flags The Linux bridge implementation allows various properties of the bridge to be controlled, such as flooding unknown unicast and multicast frames. This patch adds the necessary DSA infrastructure to allow the Linux bridge support to control these properties for DSA switches. Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> [florian: Add missing dp and ds variables declaration to fix build] Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-20 23:35:04 +00:00
case SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS:
net: dsa: fix switchdev objects on bridge master mistakenly being applied on ports Tobias reports that after the blamed patch, VLAN objects being added to a bridge device are being added to all slave ports instead (swp2, swp3). ip link add br0 type bridge vlan_filtering 1 ip link set swp2 master br0 ip link set swp3 master br0 bridge vlan add dev br0 vid 100 self This is because the fix was too broad: we made dsa_port_offloads_netdev say "yes, I offload the br0 bridge" for all slave ports, but we didn't add the checks whether the switchdev object was in fact meant for the physical port or for the bridge itself. So we are reacting on events in a way in which we shouldn't. The reason why the fix was too broad is because the question itself, "does this DSA port offload this netdev", was too broad in the first place. The solution is to disambiguate the question and separate it into two different functions, one to be called for each switchdev attribute / object that has an orig_dev == net_bridge (dsa_port_offloads_bridge), and the other for orig_dev == net_bridge_port (*_offloads_bridge_port). In the case of VLAN objects on the bridge interface, this solves the problem because we know that VLAN objects are per bridge port and not per bridge. And when orig_dev is equal to the net_bridge, we offload it as a bridge, but not as a bridge port; that's how we are able to skip reacting on those events. Note that this is compatible with future plans to have explicit offloading of VLAN objects on the bridge interface as a bridge port (in DSA, this signifies that we should add that VLAN towards the CPU port). Fixes: 99b8202b179f ("net: dsa: fix SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING getting ignored") Reported-by: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com> Tested-by: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-07 10:21:56 +00:00
if (!dsa_port_offloads_bridge_port(dp, attr->orig_dev))
return -EOPNOTSUPP;
net: dsa: act as passthrough for bridge port flags There are multiple ways in which a PORT_BRIDGE_FLAGS attribute can be expressed by the bridge through switchdev, and not all of them can be emulated by DSA mid-layer API at the same time. One possible configuration is when the bridge offloads the port flags using a mask that has a single bit set - therefore only one feature should change. However, DSA currently groups together unicast and multicast flooding in the .port_egress_floods method, which limits our options when we try to add support for turning off broadcast flooding: do we extend .port_egress_floods with a third parameter which b53 and mv88e6xxx will ignore? But that means that the DSA layer, which currently implements the PRE_BRIDGE_FLAGS attribute all by itself, will see that .port_egress_floods is implemented, and will report that all 3 types of flooding are supported - not necessarily true. Another configuration is when the user specifies more than one flag at the same time, in the same netlink message. If we were to create one individual function per offloadable bridge port flag, we would limit the expressiveness of the switch driver of refusing certain combinations of flag values. For example, a switch may not have an explicit knob for flooding of unknown multicast, just for flooding in general. In that case, the only correct thing to do is to allow changes to BR_FLOOD and BR_MCAST_FLOOD in tandem, and never allow mismatched values. But having a separate .port_set_unicast_flood and .port_set_multicast_flood would not allow the driver to possibly reject that. Also, DSA doesn't consider it necessary to inform the driver that a SWITCHDEV_ATTR_ID_BRIDGE_MROUTER attribute was offloaded, because it just calls .port_egress_floods for the CPU port. When we'll add support for the plain SWITCHDEV_ATTR_ID_PORT_MROUTER, that will become a real problem because the flood settings will need to be held statefully in the DSA middle layer, otherwise changing the mrouter port attribute will impact the flooding attribute. And that's _assuming_ that the underlying hardware doesn't have anything else to do when a multicast router attaches to a port than flood unknown traffic to it. If it does, there will need to be a dedicated .port_set_mrouter anyway. So we need to let the DSA drivers see the exact form that the bridge passes this switchdev attribute in, otherwise we are standing in the way. Therefore we also need to use this form of language when communicating to the driver that it needs to configure its initial (before bridge join) and final (after bridge leave) port flags. The b53 and mv88e6xxx drivers are converted to the passthrough API and their implementation of .port_egress_floods is split into two: a function that configures unicast flooding and another for multicast. The mv88e6xxx implementation is quite hairy, and it turns out that the implementations of unknown unicast flooding are actually the same for 6185 and for 6352: behind the confusing names actually lie two individual bits: NO_UNKNOWN_MC -> FLOOD_UC = 0x4 = BIT(2) NO_UNKNOWN_UC -> FLOOD_MC = 0x8 = BIT(3) so there was no reason to entangle them in the first place. Whereas the 6185 writes to MV88E6185_PORT_CTL0_FORWARD_UNKNOWN of PORT_CTL0, which has the exact same bit index. I have left the implementations separate though, for the only reason that the names are different enough to confuse me, since I am not able to double-check with a user manual. The multicast flooding setting for 6185 is in a different register than for 6352 though. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12 15:15:56 +00:00
ret = dsa_port_bridge_flags(dp, attr->u.brport_flags, extack);
net: dsa: add support for bridge flags The Linux bridge implementation allows various properties of the bridge to be controlled, such as flooding unknown unicast and multicast frames. This patch adds the necessary DSA infrastructure to allow the Linux bridge support to control these properties for DSA switches. Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> [florian: Add missing dp and ds variables declaration to fix build] Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-20 23:35:04 +00:00
break;
net: dsa: Pass VLAN MSTI migration notifications to driver Add the usual trampoline functionality from the generic DSA layer down to the drivers for VLAN MSTI migrations. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-16 15:08:53 +00:00
case SWITCHDEV_ATTR_ID_VLAN_MSTI:
if (!dsa_port_offloads_bridge_dev(dp, attr->orig_dev))
return -EOPNOTSUPP;
ret = dsa_port_vlan_msti(dp, &attr->u.vlan_msti);
break;
switchdev: convert STP update to switchdev attr set STP update is just a settable port attribute, so convert switchdev_port_stp_update to an attr set. For DSA, the prepare phase is skipped and STP updates are only done in the commit phase. This is because currently the DSA drivers don't need to allocate any memory for STP updates and the STP update will not fail to HW (unless something horrible goes wrong on the MDIO bus, in which case the prepare phase wouldn't have been able to predict anyway). Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-10 16:47:51 +00:00
default:
ret = -EOPNOTSUPP;
break;
}
return ret;
}
net: dsa: convert denying bridge VLAN with existing 8021q upper to PRECHANGEUPPER This is checking for the following order of operations, and makes sure to deny that configuration: ip link add link swp2 name swp2.100 type vlan id 100 ip link add br0 type bridge vlan_filtering 1 ip link set swp2 master br0 bridge vlan add dev swp2 vid 100 Instead of using vlan_for_each(), which looks at the VLAN filters installed with vlan_vid_add(), just track the 8021q uppers. This has the advantage of freeing up the vlan_vid_add() call for actual VLAN filtering. There is another change in this patch. The check is moved in slave.c, from switch.c. I don't think it makes sense to have this 8021q upper check for each switch port that gets notified of that VLAN addition (these include DSA links and CPU ports, we know those can't have 8021q uppers because they don't have a net_device registered for them), so just do it in slave.c, for that one slave interface. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21 00:10:26 +00:00
/* Must be called under rcu_read_lock() */
static int
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dsa_user_vlan_check_for_8021q_uppers(struct net_device *user,
const struct switchdev_obj_port_vlan *vlan)
net: dsa: convert denying bridge VLAN with existing 8021q upper to PRECHANGEUPPER This is checking for the following order of operations, and makes sure to deny that configuration: ip link add link swp2 name swp2.100 type vlan id 100 ip link add br0 type bridge vlan_filtering 1 ip link set swp2 master br0 bridge vlan add dev swp2 vid 100 Instead of using vlan_for_each(), which looks at the VLAN filters installed with vlan_vid_add(), just track the 8021q uppers. This has the advantage of freeing up the vlan_vid_add() call for actual VLAN filtering. There is another change in this patch. The check is moved in slave.c, from switch.c. I don't think it makes sense to have this 8021q upper check for each switch port that gets notified of that VLAN addition (these include DSA links and CPU ports, we know those can't have 8021q uppers because they don't have a net_device registered for them), so just do it in slave.c, for that one slave interface. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21 00:10:26 +00:00
{
struct net_device *upper_dev;
struct list_head *iter;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
netdev_for_each_upper_dev_rcu(user, upper_dev, iter) {
net: dsa: convert denying bridge VLAN with existing 8021q upper to PRECHANGEUPPER This is checking for the following order of operations, and makes sure to deny that configuration: ip link add link swp2 name swp2.100 type vlan id 100 ip link add br0 type bridge vlan_filtering 1 ip link set swp2 master br0 bridge vlan add dev swp2 vid 100 Instead of using vlan_for_each(), which looks at the VLAN filters installed with vlan_vid_add(), just track the 8021q uppers. This has the advantage of freeing up the vlan_vid_add() call for actual VLAN filtering. There is another change in this patch. The check is moved in slave.c, from switch.c. I don't think it makes sense to have this 8021q upper check for each switch port that gets notified of that VLAN addition (these include DSA links and CPU ports, we know those can't have 8021q uppers because they don't have a net_device registered for them), so just do it in slave.c, for that one slave interface. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21 00:10:26 +00:00
u16 vid;
if (!is_vlan_dev(upper_dev))
continue;
vid = vlan_dev_vlan_id(upper_dev);
net: switchdev: remove vid_begin -> vid_end range from VLAN objects The call path of a switchdev VLAN addition to the bridge looks something like this today: nbp_vlan_init | __br_vlan_set_default_pvid | | | | | br_afspec | | | | | | | v | | | br_process_vlan_info | | | | | | | v | | | br_vlan_info | | | / \ / | | / \ / | | / \ / | | / \ / v v v v v nbp_vlan_add br_vlan_add ------+ | ^ ^ | | | / | | | | / / / | \ br_vlan_get_master/ / v \ ^ / / br_vlan_add_existing \ | / / | \ | / / / \ | / / / \ | / / / \ | / / / v | | v / __vlan_add / / | / / | / v | / __vlan_vid_add | / \ | / v v v br_switchdev_port_vlan_add The ranges UAPI was introduced to the bridge in commit bdced7ef7838 ("bridge: support for multiple vlans and vlan ranges in setlink and dellink requests") (Jan 10 2015). But the VLAN ranges (parsed in br_afspec) have always been passed one by one, through struct bridge_vlan_info tmp_vinfo, to br_vlan_info. So the range never went too far in depth. Then Scott Feldman introduced the switchdev_port_bridge_setlink function in commit 47f8328bb1a4 ("switchdev: add new switchdev bridge setlink"). That marked the introduction of the SWITCHDEV_OBJ_PORT_VLAN, which made full use of the range. But switchdev_port_bridge_setlink was called like this: br_setlink -> br_afspec -> switchdev_port_bridge_setlink Basically, the switchdev and the bridge code were not tightly integrated. Then commit 41c498b9359e ("bridge: restore br_setlink back to original") came, and switchdev drivers were required to implement .ndo_bridge_setlink = switchdev_port_bridge_setlink for a while. In the meantime, commits such as 0944d6b5a2fa ("bridge: try switchdev op first in __vlan_vid_add/del") finally made switchdev penetrate the br_vlan_info() barrier and start to develop the call path we have today. But remember, br_vlan_info() still receives VLANs one by one. Then Arkadi Sharshevsky refactored the switchdev API in 2017 in commit 29ab586c3d83 ("net: switchdev: Remove bridge bypass support from switchdev") so that drivers would not implement .ndo_bridge_setlink any longer. The switchdev_port_bridge_setlink also got deleted. This refactoring removed the parallel bridge_setlink implementation from switchdev, and left the only switchdev VLAN objects to be the ones offloaded from __vlan_vid_add (basically RX filtering) and __vlan_add (the latter coming from commit 9c86ce2c1ae3 ("net: bridge: Notify about bridge VLANs")). That is to say, today the switchdev VLAN object ranges are not used in the kernel. Refactoring the above call path is a bit complicated, when the bridge VLAN call path is already a bit complicated. Let's go off and finish the job of commit 29ab586c3d83 by deleting the bogus iteration through the VLAN ranges from the drivers. Some aspects of this feature never made too much sense in the first place. For example, what is a range of VLANs all having the BRIDGE_VLAN_INFO_PVID flag supposed to mean, when a port can obviously have a single pvid? This particular configuration _is_ denied as of commit 6623c60dc28e ("bridge: vlan: enforce no pvid flag in vlan ranges"), but from an API perspective, the driver still has to play pretend, and only offload the vlan->vid_end as pvid. And the addition of a switchdev VLAN object can modify the flags of another, completely unrelated, switchdev VLAN object! (a VLAN that is PVID will invalidate the PVID flag from whatever other VLAN had previously been offloaded with switchdev and had that flag. Yet switchdev never notifies about that change, drivers are supposed to guess). Nonetheless, having a VLAN range in the API makes error handling look scarier than it really is - unwinding on errors and all of that. When in reality, no one really calls this API with more than one VLAN. It is all unnecessary complexity. And despite appearing pretentious (two-phase transactional model and all), the switchdev API is really sloppy because the VLAN addition and removal operations are not paired with one another (you can add a VLAN 100 times and delete it just once). The bridge notifies through switchdev of a VLAN addition not only when the flags of an existing VLAN change, but also when nothing changes. There are switchdev drivers out there who don't like adding a VLAN that has already been added, and those checks don't really belong at driver level. But the fact that the API contains ranges is yet another factor that prevents this from being addressed in the future. Of the existing switchdev pieces of hardware, it appears that only Mellanox Spectrum supports offloading more than one VLAN at a time, through mlxsw_sp_port_vlan_set. I have kept that code internal to the driver, because there is some more bookkeeping that makes use of it, but I deleted it from the switchdev API. But since the switchdev support for ranges has already been de facto deleted by a Mellanox employee and nobody noticed for 4 years, I'm going to assume it's not a biggie. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> # switchdev and mlxsw Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> # hellcreek Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-09 00:01:46 +00:00
if (vid == vlan->vid)
net: dsa: convert denying bridge VLAN with existing 8021q upper to PRECHANGEUPPER This is checking for the following order of operations, and makes sure to deny that configuration: ip link add link swp2 name swp2.100 type vlan id 100 ip link add br0 type bridge vlan_filtering 1 ip link set swp2 master br0 bridge vlan add dev swp2 vid 100 Instead of using vlan_for_each(), which looks at the VLAN filters installed with vlan_vid_add(), just track the 8021q uppers. This has the advantage of freeing up the vlan_vid_add() call for actual VLAN filtering. There is another change in this patch. The check is moved in slave.c, from switch.c. I don't think it makes sense to have this 8021q upper check for each switch port that gets notified of that VLAN addition (these include DSA links and CPU ports, we know those can't have 8021q uppers because they don't have a net_device registered for them), so just do it in slave.c, for that one slave interface. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21 00:10:26 +00:00
return -EBUSY;
}
return 0;
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_vlan_add(struct net_device *dev,
const struct switchdev_obj *obj,
struct netlink_ext_ack *extack)
net: dsa: add slave VLAN helpers Add dsa_slave_vlan_add and dsa_slave_vlan_del helpers to handle SWITCHDEV_OBJ_ID_PORT_VLAN switchdev objects. Also copy the switchdev_obj_port_vlan structure on add since we will modify it in future patches. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-25 17:25:17 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: add explicit support for host bridge VLANs Currently, DSA programs VLANs on shared (DSA and CPU) ports each time it does so on user ports. This is good for basic functionality but has several limitations: - the VLAN group which must reach the CPU may be radically different from the VLAN group that must be autonomously forwarded by the switch. In other words, the admin may want to isolate noisy stations and avoid traffic from them going to the control processor of the switch, where it would just waste useless cycles. The bridge already supports independent control of VLAN groups on bridge ports and on the bridge itself, and when VLAN-aware, it will drop packets in software anyway if their VID isn't added as a 'self' entry towards the bridge device. - Replaying host FDB entries may depend, for some drivers like mv88e6xxx, on replaying the host VLANs as well. The 2 VLAN groups are approximately the same in most regular cases, but there are corner cases when timing matters, and DSA's approximation of replicating VLANs on shared ports simply does not work. - If a user makes the bridge (implicitly the CPU port) join a VLAN by accident, there is no way for the CPU port to isolate itself from that noisy VLAN except by rebooting the system. This is because for each VLAN added on a user port, DSA will add it on shared ports too, but for each VLAN deletion on a user port, it will remain installed on shared ports, since DSA has no good indication of whether the VLAN is still in use or not. Now that the bridge driver emits well-balanced SWITCHDEV_OBJ_ID_PORT_VLAN addition and removal events, DSA has a simple and straightforward task of separating the bridge port VLANs (these have an orig_dev which is a DSA slave interface, or a LAG interface) from the host VLANs (these have an orig_dev which is a bridge interface), and to keep a simple reference count of each VID on each shared port. Forwarding VLANs must be installed on the bridge ports and on all DSA ports interconnecting them. We don't have a good view of the exact topology, so we simply install forwarding VLANs on all DSA ports, which is what has been done until now. Host VLANs must be installed primarily on the dedicated CPU port of each bridge port. More subtly, they must also be installed on upstream-facing and downstream-facing DSA ports that are connecting the bridge ports and the CPU. This ensures that the mv88e6xxx's problem (VID of host FDB entry may be absent from VTU) is still addressed even if that switch is in a cross-chip setup, and it has no local CPU port. Therefore: - user ports contain only bridge port (forwarding) VLANs, and no refcounting is necessary - DSA ports contain both forwarding and host VLANs. Refcounting is necessary among these 2 types. - CPU ports contain only host VLANs. Refcounting is also necessary. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-15 17:02:17 +00:00
struct switchdev_obj_port_vlan *vlan;
net: switchdev: remove vid_begin -> vid_end range from VLAN objects The call path of a switchdev VLAN addition to the bridge looks something like this today: nbp_vlan_init | __br_vlan_set_default_pvid | | | | | br_afspec | | | | | | | v | | | br_process_vlan_info | | | | | | | v | | | br_vlan_info | | | / \ / | | / \ / | | / \ / | | / \ / v v v v v nbp_vlan_add br_vlan_add ------+ | ^ ^ | | | / | | | | / / / | \ br_vlan_get_master/ / v \ ^ / / br_vlan_add_existing \ | / / | \ | / / / \ | / / / \ | / / / \ | / / / v | | v / __vlan_add / / | / / | / v | / __vlan_vid_add | / \ | / v v v br_switchdev_port_vlan_add The ranges UAPI was introduced to the bridge in commit bdced7ef7838 ("bridge: support for multiple vlans and vlan ranges in setlink and dellink requests") (Jan 10 2015). But the VLAN ranges (parsed in br_afspec) have always been passed one by one, through struct bridge_vlan_info tmp_vinfo, to br_vlan_info. So the range never went too far in depth. Then Scott Feldman introduced the switchdev_port_bridge_setlink function in commit 47f8328bb1a4 ("switchdev: add new switchdev bridge setlink"). That marked the introduction of the SWITCHDEV_OBJ_PORT_VLAN, which made full use of the range. But switchdev_port_bridge_setlink was called like this: br_setlink -> br_afspec -> switchdev_port_bridge_setlink Basically, the switchdev and the bridge code were not tightly integrated. Then commit 41c498b9359e ("bridge: restore br_setlink back to original") came, and switchdev drivers were required to implement .ndo_bridge_setlink = switchdev_port_bridge_setlink for a while. In the meantime, commits such as 0944d6b5a2fa ("bridge: try switchdev op first in __vlan_vid_add/del") finally made switchdev penetrate the br_vlan_info() barrier and start to develop the call path we have today. But remember, br_vlan_info() still receives VLANs one by one. Then Arkadi Sharshevsky refactored the switchdev API in 2017 in commit 29ab586c3d83 ("net: switchdev: Remove bridge bypass support from switchdev") so that drivers would not implement .ndo_bridge_setlink any longer. The switchdev_port_bridge_setlink also got deleted. This refactoring removed the parallel bridge_setlink implementation from switchdev, and left the only switchdev VLAN objects to be the ones offloaded from __vlan_vid_add (basically RX filtering) and __vlan_add (the latter coming from commit 9c86ce2c1ae3 ("net: bridge: Notify about bridge VLANs")). That is to say, today the switchdev VLAN object ranges are not used in the kernel. Refactoring the above call path is a bit complicated, when the bridge VLAN call path is already a bit complicated. Let's go off and finish the job of commit 29ab586c3d83 by deleting the bogus iteration through the VLAN ranges from the drivers. Some aspects of this feature never made too much sense in the first place. For example, what is a range of VLANs all having the BRIDGE_VLAN_INFO_PVID flag supposed to mean, when a port can obviously have a single pvid? This particular configuration _is_ denied as of commit 6623c60dc28e ("bridge: vlan: enforce no pvid flag in vlan ranges"), but from an API perspective, the driver still has to play pretend, and only offload the vlan->vid_end as pvid. And the addition of a switchdev VLAN object can modify the flags of another, completely unrelated, switchdev VLAN object! (a VLAN that is PVID will invalidate the PVID flag from whatever other VLAN had previously been offloaded with switchdev and had that flag. Yet switchdev never notifies about that change, drivers are supposed to guess). Nonetheless, having a VLAN range in the API makes error handling look scarier than it really is - unwinding on errors and all of that. When in reality, no one really calls this API with more than one VLAN. It is all unnecessary complexity. And despite appearing pretentious (two-phase transactional model and all), the switchdev API is really sloppy because the VLAN addition and removal operations are not paired with one another (you can add a VLAN 100 times and delete it just once). The bridge notifies through switchdev of a VLAN addition not only when the flags of an existing VLAN change, but also when nothing changes. There are switchdev drivers out there who don't like adding a VLAN that has already been added, and those checks don't really belong at driver level. But the fact that the API contains ranges is yet another factor that prevents this from being addressed in the future. Of the existing switchdev pieces of hardware, it appears that only Mellanox Spectrum supports offloading more than one VLAN at a time, through mlxsw_sp_port_vlan_set. I have kept that code internal to the driver, because there is some more bookkeeping that makes use of it, but I deleted it from the switchdev API. But since the switchdev support for ranges has already been de facto deleted by a Mellanox employee and nobody noticed for 4 years, I'm going to assume it's not a biggie. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> # switchdev and mlxsw Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> # hellcreek Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-09 00:01:46 +00:00
int err;
net: dsa: add slave VLAN helpers Add dsa_slave_vlan_add and dsa_slave_vlan_del helpers to handle SWITCHDEV_OBJ_ID_PORT_VLAN switchdev objects. Also copy the switchdev_obj_port_vlan structure on add since we will modify it in future patches. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-25 17:25:17 +00:00
net: dsa: set configure_vlan_while_not_filtering to true by default As explained in commit 54a0ed0df496 ("net: dsa: provide an option for drivers to always receive bridge VLANs"), DSA has historically been skipping VLAN switchdev operations when the bridge wasn't in vlan_filtering mode, but the reason why it was doing that has never been clear. So the configure_vlan_while_not_filtering option is there merely to preserve functionality for existing drivers. It isn't some behavior that drivers should opt into. Ideally, when all drivers leave this flag set, we can delete the dsa_port_skip_vlan_configuration() function. New drivers always seem to omit setting this flag, for some reason. So let's reverse the logic: the DSA core sets it by default to true before the .setup() callback, and legacy drivers can turn it off. This way, new drivers get the new behavior by default, unless they explicitly set the flag to false, which is more obvious during review. Remove the assignment from drivers which were setting it to true, and add the assignment to false for the drivers that didn't previously have it. This way, it should be easier to see how many we have left. The following drivers: lan9303, mv88e6060 were skipped from setting this flag to false, because they didn't have any VLAN offload ops in the first place. The Broadcom Starfighter 2 driver calls the common b53_switch_alloc and therefore also inherits the configure_vlan_while_not_filtering=true behavior. Also, print a message through netlink extack every time a VLAN has been skipped. This is mildly annoying on purpose, so that (a) it is at least clear that VLANs are being skipped - the legacy behavior in itself is confusing, and the extack should be much more difficult to miss, unlike kernel logs - and (b) people have one more incentive to convert to the new behavior. No behavior change except for the added prints is intended at this time. $ ip link add br0 type bridge vlan_filtering 0 $ ip link set sw0p2 master br0 [ 60.315148] br0: port 1(sw0p2) entered blocking state [ 60.320350] br0: port 1(sw0p2) entered disabled state [ 60.327839] device sw0p2 entered promiscuous mode [ 60.334905] br0: port 1(sw0p2) entered blocking state [ 60.340142] br0: port 1(sw0p2) entered forwarding state Warning: dsa_core: skipping configuration of VLAN. # This was the pvid $ bridge vlan add dev sw0p2 vid 100 Warning: dsa_core: skipping configuration of VLAN. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210115231919.43834-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-15 23:19:19 +00:00
if (dsa_port_skip_vlan_configuration(dp)) {
NL_SET_ERR_MSG_MOD(extack, "skipping configuration of VLAN");
net: dsa: check bridge VLAN in slave operations The bridge VLANs are not offloaded by dsa_port_vlan_* if the port is not bridged or if its bridge is not VLAN aware. This is a good thing but other corners of DSA, such as the tag_8021q driver, may need to program VLANs regardless the bridge state. And also because bridge_dev is specific to user ports anyway, move these checks were it belongs, one layer up in the slave code. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Suggested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-25 17:25:18 +00:00
return 0;
net: dsa: set configure_vlan_while_not_filtering to true by default As explained in commit 54a0ed0df496 ("net: dsa: provide an option for drivers to always receive bridge VLANs"), DSA has historically been skipping VLAN switchdev operations when the bridge wasn't in vlan_filtering mode, but the reason why it was doing that has never been clear. So the configure_vlan_while_not_filtering option is there merely to preserve functionality for existing drivers. It isn't some behavior that drivers should opt into. Ideally, when all drivers leave this flag set, we can delete the dsa_port_skip_vlan_configuration() function. New drivers always seem to omit setting this flag, for some reason. So let's reverse the logic: the DSA core sets it by default to true before the .setup() callback, and legacy drivers can turn it off. This way, new drivers get the new behavior by default, unless they explicitly set the flag to false, which is more obvious during review. Remove the assignment from drivers which were setting it to true, and add the assignment to false for the drivers that didn't previously have it. This way, it should be easier to see how many we have left. The following drivers: lan9303, mv88e6060 were skipped from setting this flag to false, because they didn't have any VLAN offload ops in the first place. The Broadcom Starfighter 2 driver calls the common b53_switch_alloc and therefore also inherits the configure_vlan_while_not_filtering=true behavior. Also, print a message through netlink extack every time a VLAN has been skipped. This is mildly annoying on purpose, so that (a) it is at least clear that VLANs are being skipped - the legacy behavior in itself is confusing, and the extack should be much more difficult to miss, unlike kernel logs - and (b) people have one more incentive to convert to the new behavior. No behavior change except for the added prints is intended at this time. $ ip link add br0 type bridge vlan_filtering 0 $ ip link set sw0p2 master br0 [ 60.315148] br0: port 1(sw0p2) entered blocking state [ 60.320350] br0: port 1(sw0p2) entered disabled state [ 60.327839] device sw0p2 entered promiscuous mode [ 60.334905] br0: port 1(sw0p2) entered blocking state [ 60.340142] br0: port 1(sw0p2) entered forwarding state Warning: dsa_core: skipping configuration of VLAN. # This was the pvid $ bridge vlan add dev sw0p2 vid 100 Warning: dsa_core: skipping configuration of VLAN. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210115231919.43834-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-15 23:19:19 +00:00
}
net: dsa: check bridge VLAN in slave operations The bridge VLANs are not offloaded by dsa_port_vlan_* if the port is not bridged or if its bridge is not VLAN aware. This is a good thing but other corners of DSA, such as the tag_8021q driver, may need to program VLANs regardless the bridge state. And also because bridge_dev is specific to user ports anyway, move these checks were it belongs, one layer up in the slave code. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Suggested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-25 17:25:18 +00:00
net: dsa: add explicit support for host bridge VLANs Currently, DSA programs VLANs on shared (DSA and CPU) ports each time it does so on user ports. This is good for basic functionality but has several limitations: - the VLAN group which must reach the CPU may be radically different from the VLAN group that must be autonomously forwarded by the switch. In other words, the admin may want to isolate noisy stations and avoid traffic from them going to the control processor of the switch, where it would just waste useless cycles. The bridge already supports independent control of VLAN groups on bridge ports and on the bridge itself, and when VLAN-aware, it will drop packets in software anyway if their VID isn't added as a 'self' entry towards the bridge device. - Replaying host FDB entries may depend, for some drivers like mv88e6xxx, on replaying the host VLANs as well. The 2 VLAN groups are approximately the same in most regular cases, but there are corner cases when timing matters, and DSA's approximation of replicating VLANs on shared ports simply does not work. - If a user makes the bridge (implicitly the CPU port) join a VLAN by accident, there is no way for the CPU port to isolate itself from that noisy VLAN except by rebooting the system. This is because for each VLAN added on a user port, DSA will add it on shared ports too, but for each VLAN deletion on a user port, it will remain installed on shared ports, since DSA has no good indication of whether the VLAN is still in use or not. Now that the bridge driver emits well-balanced SWITCHDEV_OBJ_ID_PORT_VLAN addition and removal events, DSA has a simple and straightforward task of separating the bridge port VLANs (these have an orig_dev which is a DSA slave interface, or a LAG interface) from the host VLANs (these have an orig_dev which is a bridge interface), and to keep a simple reference count of each VID on each shared port. Forwarding VLANs must be installed on the bridge ports and on all DSA ports interconnecting them. We don't have a good view of the exact topology, so we simply install forwarding VLANs on all DSA ports, which is what has been done until now. Host VLANs must be installed primarily on the dedicated CPU port of each bridge port. More subtly, they must also be installed on upstream-facing and downstream-facing DSA ports that are connecting the bridge ports and the CPU. This ensures that the mv88e6xxx's problem (VID of host FDB entry may be absent from VTU) is still addressed even if that switch is in a cross-chip setup, and it has no local CPU port. Therefore: - user ports contain only bridge port (forwarding) VLANs, and no refcounting is necessary - DSA ports contain both forwarding and host VLANs. Refcounting is necessary among these 2 types. - CPU ports contain only host VLANs. Refcounting is also necessary. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-15 17:02:17 +00:00
vlan = SWITCHDEV_OBJ_PORT_VLAN(obj);
net: dsa: add slave VLAN helpers Add dsa_slave_vlan_add and dsa_slave_vlan_del helpers to handle SWITCHDEV_OBJ_ID_PORT_VLAN switchdev objects. Also copy the switchdev_obj_port_vlan structure on add since we will modify it in future patches. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-25 17:25:17 +00:00
net: dsa: convert denying bridge VLAN with existing 8021q upper to PRECHANGEUPPER This is checking for the following order of operations, and makes sure to deny that configuration: ip link add link swp2 name swp2.100 type vlan id 100 ip link add br0 type bridge vlan_filtering 1 ip link set swp2 master br0 bridge vlan add dev swp2 vid 100 Instead of using vlan_for_each(), which looks at the VLAN filters installed with vlan_vid_add(), just track the 8021q uppers. This has the advantage of freeing up the vlan_vid_add() call for actual VLAN filtering. There is another change in this patch. The check is moved in slave.c, from switch.c. I don't think it makes sense to have this 8021q upper check for each switch port that gets notified of that VLAN addition (these include DSA links and CPU ports, we know those can't have 8021q uppers because they don't have a net_device registered for them), so just do it in slave.c, for that one slave interface. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21 00:10:26 +00:00
/* Deny adding a bridge VLAN when there is already an 802.1Q upper with
* the same VID.
*/
net: dsa: hide dp->bridge_dev and dp->bridge_num in the core behind helpers The location of the bridge device pointer and number is going to change. It is not going to be kept individually per port, but in a common structure allocated dynamically and which will have lockdep validation. Create helpers to access these elements so that we have a migration path to the new organization. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-06 16:57:52 +00:00
if (br_vlan_enabled(dsa_port_bridge_dev_get(dp))) {
net: dsa: convert denying bridge VLAN with existing 8021q upper to PRECHANGEUPPER This is checking for the following order of operations, and makes sure to deny that configuration: ip link add link swp2 name swp2.100 type vlan id 100 ip link add br0 type bridge vlan_filtering 1 ip link set swp2 master br0 bridge vlan add dev swp2 vid 100 Instead of using vlan_for_each(), which looks at the VLAN filters installed with vlan_vid_add(), just track the 8021q uppers. This has the advantage of freeing up the vlan_vid_add() call for actual VLAN filtering. There is another change in this patch. The check is moved in slave.c, from switch.c. I don't think it makes sense to have this 8021q upper check for each switch port that gets notified of that VLAN addition (these include DSA links and CPU ports, we know those can't have 8021q uppers because they don't have a net_device registered for them), so just do it in slave.c, for that one slave interface. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21 00:10:26 +00:00
rcu_read_lock();
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
err = dsa_user_vlan_check_for_8021q_uppers(dev, vlan);
net: dsa: convert denying bridge VLAN with existing 8021q upper to PRECHANGEUPPER This is checking for the following order of operations, and makes sure to deny that configuration: ip link add link swp2 name swp2.100 type vlan id 100 ip link add br0 type bridge vlan_filtering 1 ip link set swp2 master br0 bridge vlan add dev swp2 vid 100 Instead of using vlan_for_each(), which looks at the VLAN filters installed with vlan_vid_add(), just track the 8021q uppers. This has the advantage of freeing up the vlan_vid_add() call for actual VLAN filtering. There is another change in this patch. The check is moved in slave.c, from switch.c. I don't think it makes sense to have this 8021q upper check for each switch port that gets notified of that VLAN addition (these include DSA links and CPU ports, we know those can't have 8021q uppers because they don't have a net_device registered for them), so just do it in slave.c, for that one slave interface. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21 00:10:26 +00:00
rcu_read_unlock();
net: dsa: propagate extack to .port_vlan_add Allow drivers to communicate their restrictions to user space directly, instead of printing to the kernel log. Where the conversion would have been lossy and things like VLAN ID could no longer be conveyed (due to the lack of support for printf format specifier in netlink extack), I chose to keep the messages in full form to the kernel log only, and leave it up to individual driver maintainers to move more messages to extack. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-13 20:43:18 +00:00
if (err) {
NL_SET_ERR_MSG_MOD(extack,
"Port already has a VLAN upper with this VID");
net: dsa: convert denying bridge VLAN with existing 8021q upper to PRECHANGEUPPER This is checking for the following order of operations, and makes sure to deny that configuration: ip link add link swp2 name swp2.100 type vlan id 100 ip link add br0 type bridge vlan_filtering 1 ip link set swp2 master br0 bridge vlan add dev swp2 vid 100 Instead of using vlan_for_each(), which looks at the VLAN filters installed with vlan_vid_add(), just track the 8021q uppers. This has the advantage of freeing up the vlan_vid_add() call for actual VLAN filtering. There is another change in this patch. The check is moved in slave.c, from switch.c. I don't think it makes sense to have this 8021q upper check for each switch port that gets notified of that VLAN addition (these include DSA links and CPU ports, we know those can't have 8021q uppers because they don't have a net_device registered for them), so just do it in slave.c, for that one slave interface. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21 00:10:26 +00:00
return err;
net: dsa: propagate extack to .port_vlan_add Allow drivers to communicate their restrictions to user space directly, instead of printing to the kernel log. Where the conversion would have been lossy and things like VLAN ID could no longer be conveyed (due to the lack of support for printf format specifier in netlink extack), I chose to keep the messages in full form to the kernel log only, and leave it up to individual driver maintainers to move more messages to extack. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-13 20:43:18 +00:00
}
net: dsa: convert denying bridge VLAN with existing 8021q upper to PRECHANGEUPPER This is checking for the following order of operations, and makes sure to deny that configuration: ip link add link swp2 name swp2.100 type vlan id 100 ip link add br0 type bridge vlan_filtering 1 ip link set swp2 master br0 bridge vlan add dev swp2 vid 100 Instead of using vlan_for_each(), which looks at the VLAN filters installed with vlan_vid_add(), just track the 8021q uppers. This has the advantage of freeing up the vlan_vid_add() call for actual VLAN filtering. There is another change in this patch. The check is moved in slave.c, from switch.c. I don't think it makes sense to have this 8021q upper check for each switch port that gets notified of that VLAN addition (these include DSA links and CPU ports, we know those can't have 8021q uppers because they don't have a net_device registered for them), so just do it in slave.c, for that one slave interface. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21 00:10:26 +00:00
}
net: dsa: add explicit support for host bridge VLANs Currently, DSA programs VLANs on shared (DSA and CPU) ports each time it does so on user ports. This is good for basic functionality but has several limitations: - the VLAN group which must reach the CPU may be radically different from the VLAN group that must be autonomously forwarded by the switch. In other words, the admin may want to isolate noisy stations and avoid traffic from them going to the control processor of the switch, where it would just waste useless cycles. The bridge already supports independent control of VLAN groups on bridge ports and on the bridge itself, and when VLAN-aware, it will drop packets in software anyway if their VID isn't added as a 'self' entry towards the bridge device. - Replaying host FDB entries may depend, for some drivers like mv88e6xxx, on replaying the host VLANs as well. The 2 VLAN groups are approximately the same in most regular cases, but there are corner cases when timing matters, and DSA's approximation of replicating VLANs on shared ports simply does not work. - If a user makes the bridge (implicitly the CPU port) join a VLAN by accident, there is no way for the CPU port to isolate itself from that noisy VLAN except by rebooting the system. This is because for each VLAN added on a user port, DSA will add it on shared ports too, but for each VLAN deletion on a user port, it will remain installed on shared ports, since DSA has no good indication of whether the VLAN is still in use or not. Now that the bridge driver emits well-balanced SWITCHDEV_OBJ_ID_PORT_VLAN addition and removal events, DSA has a simple and straightforward task of separating the bridge port VLANs (these have an orig_dev which is a DSA slave interface, or a LAG interface) from the host VLANs (these have an orig_dev which is a bridge interface), and to keep a simple reference count of each VID on each shared port. Forwarding VLANs must be installed on the bridge ports and on all DSA ports interconnecting them. We don't have a good view of the exact topology, so we simply install forwarding VLANs on all DSA ports, which is what has been done until now. Host VLANs must be installed primarily on the dedicated CPU port of each bridge port. More subtly, they must also be installed on upstream-facing and downstream-facing DSA ports that are connecting the bridge ports and the CPU. This ensures that the mv88e6xxx's problem (VID of host FDB entry may be absent from VTU) is still addressed even if that switch is in a cross-chip setup, and it has no local CPU port. Therefore: - user ports contain only bridge port (forwarding) VLANs, and no refcounting is necessary - DSA ports contain both forwarding and host VLANs. Refcounting is necessary among these 2 types. - CPU ports contain only host VLANs. Refcounting is also necessary. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-15 17:02:17 +00:00
return dsa_port_vlan_add(dp, vlan, extack);
}
net: dsa: offload bridge port VLANs on foreign interfaces DSA now explicitly handles VLANs installed with the 'self' flag on the bridge as host VLANs, instead of just replicating every bridge port VLAN also on the CPU port and never deleting it, which is what it did before. However, this leaves a corner case uncovered, as explained by Tobias Waldekranz: https://patchwork.kernel.org/project/netdevbpf/patch/20220209213044.2353153-6-vladimir.oltean@nxp.com/#24735260 Forwarding towards a bridge port VLAN installed on a bridge port foreign to DSA (separate NIC, Wi-Fi AP) used to work by virtue of the fact that DSA itself needed to have at least one port in that VLAN (therefore, it also had the CPU port in said VLAN). However, now that the CPU port may not be member of all VLANs that user ports are members of, we need to ensure this isn't the case if software forwarding to a foreign interface is required. The solution is to treat bridge port VLANs on standalone interfaces in the exact same way as host VLANs. From DSA's perspective, there is no difference between local termination and software forwarding; packets in that VLAN must reach the CPU in both cases. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-15 17:02:18 +00:00
/* Offload a VLAN installed on the bridge or on a foreign interface by
* installing it as a VLAN towards the CPU port.
*/
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_host_vlan_add(struct net_device *dev,
const struct switchdev_obj *obj,
struct netlink_ext_ack *extack)
net: dsa: add explicit support for host bridge VLANs Currently, DSA programs VLANs on shared (DSA and CPU) ports each time it does so on user ports. This is good for basic functionality but has several limitations: - the VLAN group which must reach the CPU may be radically different from the VLAN group that must be autonomously forwarded by the switch. In other words, the admin may want to isolate noisy stations and avoid traffic from them going to the control processor of the switch, where it would just waste useless cycles. The bridge already supports independent control of VLAN groups on bridge ports and on the bridge itself, and when VLAN-aware, it will drop packets in software anyway if their VID isn't added as a 'self' entry towards the bridge device. - Replaying host FDB entries may depend, for some drivers like mv88e6xxx, on replaying the host VLANs as well. The 2 VLAN groups are approximately the same in most regular cases, but there are corner cases when timing matters, and DSA's approximation of replicating VLANs on shared ports simply does not work. - If a user makes the bridge (implicitly the CPU port) join a VLAN by accident, there is no way for the CPU port to isolate itself from that noisy VLAN except by rebooting the system. This is because for each VLAN added on a user port, DSA will add it on shared ports too, but for each VLAN deletion on a user port, it will remain installed on shared ports, since DSA has no good indication of whether the VLAN is still in use or not. Now that the bridge driver emits well-balanced SWITCHDEV_OBJ_ID_PORT_VLAN addition and removal events, DSA has a simple and straightforward task of separating the bridge port VLANs (these have an orig_dev which is a DSA slave interface, or a LAG interface) from the host VLANs (these have an orig_dev which is a bridge interface), and to keep a simple reference count of each VID on each shared port. Forwarding VLANs must be installed on the bridge ports and on all DSA ports interconnecting them. We don't have a good view of the exact topology, so we simply install forwarding VLANs on all DSA ports, which is what has been done until now. Host VLANs must be installed primarily on the dedicated CPU port of each bridge port. More subtly, they must also be installed on upstream-facing and downstream-facing DSA ports that are connecting the bridge ports and the CPU. This ensures that the mv88e6xxx's problem (VID of host FDB entry may be absent from VTU) is still addressed even if that switch is in a cross-chip setup, and it has no local CPU port. Therefore: - user ports contain only bridge port (forwarding) VLANs, and no refcounting is necessary - DSA ports contain both forwarding and host VLANs. Refcounting is necessary among these 2 types. - CPU ports contain only host VLANs. Refcounting is also necessary. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-15 17:02:17 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: add explicit support for host bridge VLANs Currently, DSA programs VLANs on shared (DSA and CPU) ports each time it does so on user ports. This is good for basic functionality but has several limitations: - the VLAN group which must reach the CPU may be radically different from the VLAN group that must be autonomously forwarded by the switch. In other words, the admin may want to isolate noisy stations and avoid traffic from them going to the control processor of the switch, where it would just waste useless cycles. The bridge already supports independent control of VLAN groups on bridge ports and on the bridge itself, and when VLAN-aware, it will drop packets in software anyway if their VID isn't added as a 'self' entry towards the bridge device. - Replaying host FDB entries may depend, for some drivers like mv88e6xxx, on replaying the host VLANs as well. The 2 VLAN groups are approximately the same in most regular cases, but there are corner cases when timing matters, and DSA's approximation of replicating VLANs on shared ports simply does not work. - If a user makes the bridge (implicitly the CPU port) join a VLAN by accident, there is no way for the CPU port to isolate itself from that noisy VLAN except by rebooting the system. This is because for each VLAN added on a user port, DSA will add it on shared ports too, but for each VLAN deletion on a user port, it will remain installed on shared ports, since DSA has no good indication of whether the VLAN is still in use or not. Now that the bridge driver emits well-balanced SWITCHDEV_OBJ_ID_PORT_VLAN addition and removal events, DSA has a simple and straightforward task of separating the bridge port VLANs (these have an orig_dev which is a DSA slave interface, or a LAG interface) from the host VLANs (these have an orig_dev which is a bridge interface), and to keep a simple reference count of each VID on each shared port. Forwarding VLANs must be installed on the bridge ports and on all DSA ports interconnecting them. We don't have a good view of the exact topology, so we simply install forwarding VLANs on all DSA ports, which is what has been done until now. Host VLANs must be installed primarily on the dedicated CPU port of each bridge port. More subtly, they must also be installed on upstream-facing and downstream-facing DSA ports that are connecting the bridge ports and the CPU. This ensures that the mv88e6xxx's problem (VID of host FDB entry may be absent from VTU) is still addressed even if that switch is in a cross-chip setup, and it has no local CPU port. Therefore: - user ports contain only bridge port (forwarding) VLANs, and no refcounting is necessary - DSA ports contain both forwarding and host VLANs. Refcounting is necessary among these 2 types. - CPU ports contain only host VLANs. Refcounting is also necessary. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-15 17:02:17 +00:00
struct switchdev_obj_port_vlan vlan;
net: dsa: add slave VLAN helpers Add dsa_slave_vlan_add and dsa_slave_vlan_del helpers to handle SWITCHDEV_OBJ_ID_PORT_VLAN switchdev objects. Also copy the switchdev_obj_port_vlan structure on add since we will modify it in future patches. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-25 17:25:17 +00:00
net: dsa: offload bridge port VLANs on foreign interfaces DSA now explicitly handles VLANs installed with the 'self' flag on the bridge as host VLANs, instead of just replicating every bridge port VLAN also on the CPU port and never deleting it, which is what it did before. However, this leaves a corner case uncovered, as explained by Tobias Waldekranz: https://patchwork.kernel.org/project/netdevbpf/patch/20220209213044.2353153-6-vladimir.oltean@nxp.com/#24735260 Forwarding towards a bridge port VLAN installed on a bridge port foreign to DSA (separate NIC, Wi-Fi AP) used to work by virtue of the fact that DSA itself needed to have at least one port in that VLAN (therefore, it also had the CPU port in said VLAN). However, now that the CPU port may not be member of all VLANs that user ports are members of, we need to ensure this isn't the case if software forwarding to a foreign interface is required. The solution is to treat bridge port VLANs on standalone interfaces in the exact same way as host VLANs. From DSA's perspective, there is no difference between local termination and software forwarding; packets in that VLAN must reach the CPU in both cases. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-15 17:02:18 +00:00
/* Do nothing if this is a software bridge */
if (!dp->bridge)
return -EOPNOTSUPP;
net: dsa: add explicit support for host bridge VLANs Currently, DSA programs VLANs on shared (DSA and CPU) ports each time it does so on user ports. This is good for basic functionality but has several limitations: - the VLAN group which must reach the CPU may be radically different from the VLAN group that must be autonomously forwarded by the switch. In other words, the admin may want to isolate noisy stations and avoid traffic from them going to the control processor of the switch, where it would just waste useless cycles. The bridge already supports independent control of VLAN groups on bridge ports and on the bridge itself, and when VLAN-aware, it will drop packets in software anyway if their VID isn't added as a 'self' entry towards the bridge device. - Replaying host FDB entries may depend, for some drivers like mv88e6xxx, on replaying the host VLANs as well. The 2 VLAN groups are approximately the same in most regular cases, but there are corner cases when timing matters, and DSA's approximation of replicating VLANs on shared ports simply does not work. - If a user makes the bridge (implicitly the CPU port) join a VLAN by accident, there is no way for the CPU port to isolate itself from that noisy VLAN except by rebooting the system. This is because for each VLAN added on a user port, DSA will add it on shared ports too, but for each VLAN deletion on a user port, it will remain installed on shared ports, since DSA has no good indication of whether the VLAN is still in use or not. Now that the bridge driver emits well-balanced SWITCHDEV_OBJ_ID_PORT_VLAN addition and removal events, DSA has a simple and straightforward task of separating the bridge port VLANs (these have an orig_dev which is a DSA slave interface, or a LAG interface) from the host VLANs (these have an orig_dev which is a bridge interface), and to keep a simple reference count of each VID on each shared port. Forwarding VLANs must be installed on the bridge ports and on all DSA ports interconnecting them. We don't have a good view of the exact topology, so we simply install forwarding VLANs on all DSA ports, which is what has been done until now. Host VLANs must be installed primarily on the dedicated CPU port of each bridge port. More subtly, they must also be installed on upstream-facing and downstream-facing DSA ports that are connecting the bridge ports and the CPU. This ensures that the mv88e6xxx's problem (VID of host FDB entry may be absent from VTU) is still addressed even if that switch is in a cross-chip setup, and it has no local CPU port. Therefore: - user ports contain only bridge port (forwarding) VLANs, and no refcounting is necessary - DSA ports contain both forwarding and host VLANs. Refcounting is necessary among these 2 types. - CPU ports contain only host VLANs. Refcounting is also necessary. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-15 17:02:17 +00:00
if (dsa_port_skip_vlan_configuration(dp)) {
NL_SET_ERR_MSG_MOD(extack, "skipping configuration of VLAN");
return 0;
}
vlan = *SWITCHDEV_OBJ_PORT_VLAN(obj);
/* Even though drivers often handle CPU membership in special ways,
net: dsa: clear VLAN PVID flag for CPU port When the bridge offloads a VLAN on a slave port, we also need to program its dedicated CPU port as a member of the VLAN. Drivers may handle the CPU port's membership as they want. For example, Marvell as a special "Unmodified" mode to pass frames as is through such ports. Even though DSA expects the drivers to handle the CPU port membership, it does not make sense to program user VLANs as PVID on the CPU port. This patch clears this flag before programming the CPU port. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Suggested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-25 17:25:20 +00:00
* it doesn't make sense to program a PVID, so clear this flag.
*/
vlan.flags &= ~BRIDGE_VLAN_INFO_PVID;
net: dsa: add explicit support for host bridge VLANs Currently, DSA programs VLANs on shared (DSA and CPU) ports each time it does so on user ports. This is good for basic functionality but has several limitations: - the VLAN group which must reach the CPU may be radically different from the VLAN group that must be autonomously forwarded by the switch. In other words, the admin may want to isolate noisy stations and avoid traffic from them going to the control processor of the switch, where it would just waste useless cycles. The bridge already supports independent control of VLAN groups on bridge ports and on the bridge itself, and when VLAN-aware, it will drop packets in software anyway if their VID isn't added as a 'self' entry towards the bridge device. - Replaying host FDB entries may depend, for some drivers like mv88e6xxx, on replaying the host VLANs as well. The 2 VLAN groups are approximately the same in most regular cases, but there are corner cases when timing matters, and DSA's approximation of replicating VLANs on shared ports simply does not work. - If a user makes the bridge (implicitly the CPU port) join a VLAN by accident, there is no way for the CPU port to isolate itself from that noisy VLAN except by rebooting the system. This is because for each VLAN added on a user port, DSA will add it on shared ports too, but for each VLAN deletion on a user port, it will remain installed on shared ports, since DSA has no good indication of whether the VLAN is still in use or not. Now that the bridge driver emits well-balanced SWITCHDEV_OBJ_ID_PORT_VLAN addition and removal events, DSA has a simple and straightforward task of separating the bridge port VLANs (these have an orig_dev which is a DSA slave interface, or a LAG interface) from the host VLANs (these have an orig_dev which is a bridge interface), and to keep a simple reference count of each VID on each shared port. Forwarding VLANs must be installed on the bridge ports and on all DSA ports interconnecting them. We don't have a good view of the exact topology, so we simply install forwarding VLANs on all DSA ports, which is what has been done until now. Host VLANs must be installed primarily on the dedicated CPU port of each bridge port. More subtly, they must also be installed on upstream-facing and downstream-facing DSA ports that are connecting the bridge ports and the CPU. This ensures that the mv88e6xxx's problem (VID of host FDB entry may be absent from VTU) is still addressed even if that switch is in a cross-chip setup, and it has no local CPU port. Therefore: - user ports contain only bridge port (forwarding) VLANs, and no refcounting is necessary - DSA ports contain both forwarding and host VLANs. Refcounting is necessary among these 2 types. - CPU ports contain only host VLANs. Refcounting is also necessary. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-15 17:02:17 +00:00
return dsa_port_host_vlan_add(dp, &vlan, extack);
net: dsa: add slave VLAN helpers Add dsa_slave_vlan_add and dsa_slave_vlan_del helpers to handle SWITCHDEV_OBJ_ID_PORT_VLAN switchdev objects. Also copy the switchdev_obj_port_vlan structure on add since we will modify it in future patches. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-25 17:25:17 +00:00
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_port_obj_add(struct net_device *dev, const void *ctx,
const struct switchdev_obj *obj,
struct netlink_ext_ack *extack)
net: dsa: add support for switchdev FDB objects Implement the switchdev_port_obj_{add,del,dump} functions in DSA to support the SWITCHDEV_OBJ_PORT_FDB objects. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-10 13:09:53 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: add support for switchdev FDB objects Implement the switchdev_port_obj_{add,del,dump} functions in DSA to support the SWITCHDEV_OBJ_PORT_FDB objects. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-10 13:09:53 +00:00
int err;
net: bridge: ignore switchdev events for LAG ports which didn't request replay There is a slight inconvenience in the switchdev replay helpers added recently, and this is when: ip link add br0 type bridge ip link add bond0 type bond ip link set bond0 master br0 bridge vlan add dev bond0 vid 100 ip link set swp0 master bond0 ip link set swp1 master bond0 Since the underlying driver (currently only DSA) asks for a replay of VLANs when swp0 and swp1 join the LAG because it is bridged, what will happen is that DSA will try to react twice on the VLAN event for swp0. This is not really a huge problem right now, because most drivers accept duplicates since the bridge itself does, but it will become a problem when we add support for replaying switchdev object deletions. Let's fix this by adding a blank void *ctx in the replay helpers, which will be passed on by the bridge in the switchdev notifications. If the context is NULL, everything is the same as before. But if the context is populated with a valid pointer, the underlying switchdev driver (currently DSA) can use the pointer to 'see through' the bridge port (which in the example above is bond0) and 'know' that the event is only for a particular physical port offloading that bridge port, and not for all of them. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-27 11:54:25 +00:00
if (ctx && ctx != dp)
return 0;
switchdev: push object ID back to object structure Suggested-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 09:03:46 +00:00
switch (obj->id) {
net: dsa: add MDB support Add SWITCHDEV_OBJ_ID_PORT_MDB support to the DSA layer. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31 15:50:03 +00:00
case SWITCHDEV_OBJ_ID_PORT_MDB:
net: dsa: fix switchdev objects on bridge master mistakenly being applied on ports Tobias reports that after the blamed patch, VLAN objects being added to a bridge device are being added to all slave ports instead (swp2, swp3). ip link add br0 type bridge vlan_filtering 1 ip link set swp2 master br0 ip link set swp3 master br0 bridge vlan add dev br0 vid 100 self This is because the fix was too broad: we made dsa_port_offloads_netdev say "yes, I offload the br0 bridge" for all slave ports, but we didn't add the checks whether the switchdev object was in fact meant for the physical port or for the bridge itself. So we are reacting on events in a way in which we shouldn't. The reason why the fix was too broad is because the question itself, "does this DSA port offload this netdev", was too broad in the first place. The solution is to disambiguate the question and separate it into two different functions, one to be called for each switchdev attribute / object that has an orig_dev == net_bridge (dsa_port_offloads_bridge), and the other for orig_dev == net_bridge_port (*_offloads_bridge_port). In the case of VLAN objects on the bridge interface, this solves the problem because we know that VLAN objects are per bridge port and not per bridge. And when orig_dev is equal to the net_bridge, we offload it as a bridge, but not as a bridge port; that's how we are able to skip reacting on those events. Note that this is compatible with future plans to have explicit offloading of VLAN objects on the bridge interface as a bridge port (in DSA, this signifies that we should add that VLAN towards the CPU port). Fixes: 99b8202b179f ("net: dsa: fix SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING getting ignored") Reported-by: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com> Tested-by: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-07 10:21:56 +00:00
if (!dsa_port_offloads_bridge_port(dp, obj->orig_dev))
net: dsa: use switchdev handle helpers Get rid of the dsa_slave_switchdev_port_{attr_set,obj}_event functions in favor of the switchdev_handle_port_{attr_set,obj_add,obj_del} helpers which recurse into the lower devices of the target interface. This has the benefit of being aware of the operations made on the bridge device itself, where orig_dev is the bridge, and dev is the slave. This can be used later to configure the hardware switches. Only VLAN and (port) MDB objects not directly targeting the slave device are unsupported at the moment, so skip this case in their respective case statements. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14 17:49:22 +00:00
return -EOPNOTSUPP;
net: dsa: fix switchdev objects on bridge master mistakenly being applied on ports Tobias reports that after the blamed patch, VLAN objects being added to a bridge device are being added to all slave ports instead (swp2, swp3). ip link add br0 type bridge vlan_filtering 1 ip link set swp2 master br0 ip link set swp3 master br0 bridge vlan add dev br0 vid 100 self This is because the fix was too broad: we made dsa_port_offloads_netdev say "yes, I offload the br0 bridge" for all slave ports, but we didn't add the checks whether the switchdev object was in fact meant for the physical port or for the bridge itself. So we are reacting on events in a way in which we shouldn't. The reason why the fix was too broad is because the question itself, "does this DSA port offload this netdev", was too broad in the first place. The solution is to disambiguate the question and separate it into two different functions, one to be called for each switchdev attribute / object that has an orig_dev == net_bridge (dsa_port_offloads_bridge), and the other for orig_dev == net_bridge_port (*_offloads_bridge_port). In the case of VLAN objects on the bridge interface, this solves the problem because we know that VLAN objects are per bridge port and not per bridge. And when orig_dev is equal to the net_bridge, we offload it as a bridge, but not as a bridge port; that's how we are able to skip reacting on those events. Note that this is compatible with future plans to have explicit offloading of VLAN objects on the bridge interface as a bridge port (in DSA, this signifies that we should add that VLAN towards the CPU port). Fixes: 99b8202b179f ("net: dsa: fix SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING getting ignored") Reported-by: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com> Tested-by: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-07 10:21:56 +00:00
net: switchdev: remove the transaction structure from port object notifiers Since the introduction of the switchdev API, port objects were transmitted to drivers for offloading using a two-step transactional model, with a prepare phase that was supposed to catch all errors, and a commit phase that was supposed to never fail. Some classes of failures can never be avoided, like hardware access, or memory allocation. In the latter case, merely attempting to move the memory allocation to the preparation phase makes it impossible to avoid memory leaks, since commit 91cf8eceffc1 ("switchdev: Remove unused transaction item queue") which has removed the unused mechanism of passing on the allocated memory between one phase and another. It is time we admit that separating the preparation from the commit phase is something that is best left for the driver to decide, and not something that should be baked into the API, especially since there are no switchdev callers that depend on this. This patch removes the struct switchdev_trans member from switchdev port object notifier structures, and converts drivers to not look at this member. Where driver conversion is trivial (like in the case of the Marvell Prestera driver, NXP DPAA2 switch, TI CPSW, and Rocker drivers), it is done in this patch. Where driver conversion needs more attention (DSA, Mellanox Spectrum), the conversion is left for subsequent patches and here we only fake the prepare/commit phases at a lower level, just not in the switchdev notifier itself. Where the code has a natural structure that is best left alone as a preparation and a commit phase (as in the case of the Ocelot switch), that structure is left in place, just made to not depend upon the switchdev transactional model. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-09 00:01:48 +00:00
err = dsa_port_mdb_add(dp, SWITCHDEV_OBJ_PORT_MDB(obj));
net: dsa: add MDB support Add SWITCHDEV_OBJ_ID_PORT_MDB support to the DSA layer. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31 15:50:03 +00:00
break;
net: dsa: slave: Handle switchdev host mdb add/del Add code to handle switchdev host mdb add/del. Since DSA uses one of the switch ports as a transport to the host, we just need to add an MDB on this port. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-09 22:11:00 +00:00
case SWITCHDEV_OBJ_ID_HOST_MDB:
net: dsa: rename dsa_port_offloads_bridge to dsa_port_offloads_bridge_dev Currently the majority of dsa_port_bridge_dev_get() calls in drivers is just to check whether a port is under the bridge device provided as argument by the DSA API. We'd like to change that DSA API so that a more complex structure is provided as argument. To keep things more generic, and considering that the new complex structure will be provided by value and not by reference, direct comparisons between dp->bridge and the provided bridge will be broken. The generic way to do the checking would simply be to do something like dsa_port_offloads_bridge(dp, &bridge). But there's a problem, we already have a function named that way, which actually takes a bridge_dev net_device as argument. Rename it so that we can use dsa_port_offloads_bridge for something else. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-06 16:57:54 +00:00
if (!dsa_port_offloads_bridge_dev(dp, obj->orig_dev))
net: dsa: fix switchdev objects on bridge master mistakenly being applied on ports Tobias reports that after the blamed patch, VLAN objects being added to a bridge device are being added to all slave ports instead (swp2, swp3). ip link add br0 type bridge vlan_filtering 1 ip link set swp2 master br0 ip link set swp3 master br0 bridge vlan add dev br0 vid 100 self This is because the fix was too broad: we made dsa_port_offloads_netdev say "yes, I offload the br0 bridge" for all slave ports, but we didn't add the checks whether the switchdev object was in fact meant for the physical port or for the bridge itself. So we are reacting on events in a way in which we shouldn't. The reason why the fix was too broad is because the question itself, "does this DSA port offload this netdev", was too broad in the first place. The solution is to disambiguate the question and separate it into two different functions, one to be called for each switchdev attribute / object that has an orig_dev == net_bridge (dsa_port_offloads_bridge), and the other for orig_dev == net_bridge_port (*_offloads_bridge_port). In the case of VLAN objects on the bridge interface, this solves the problem because we know that VLAN objects are per bridge port and not per bridge. And when orig_dev is equal to the net_bridge, we offload it as a bridge, but not as a bridge port; that's how we are able to skip reacting on those events. Note that this is compatible with future plans to have explicit offloading of VLAN objects on the bridge interface as a bridge port (in DSA, this signifies that we should add that VLAN towards the CPU port). Fixes: 99b8202b179f ("net: dsa: fix SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING getting ignored") Reported-by: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com> Tested-by: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-07 10:21:56 +00:00
return -EOPNOTSUPP;
net: dsa: rename the host FDB and MDB methods to contain the "bridge" namespace We are preparing to add API in port.c that adds FDB and MDB entries that correspond to the port's standalone database. Rename the existing methods to make it clear that the FDB and MDB entries offloaded come from the bridge database. Since the function names lengthen in dsa_slave_switchdev_event_work(), we place "addr" and "vid" in temporary variables, to shorten those. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 19:14:09 +00:00
err = dsa_port_bridge_host_mdb_add(dp, SWITCHDEV_OBJ_PORT_MDB(obj));
net: dsa: slave: Handle switchdev host mdb add/del Add code to handle switchdev host mdb add/del. Since DSA uses one of the switch ports as a transport to the host, we just need to add an MDB on this port. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-09 22:11:00 +00:00
break;
switchdev: rename SWITCHDEV_OBJ_* enum values to SWITCHDEV_OBJ_ID_* Suggested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 09:03:41 +00:00
case SWITCHDEV_OBJ_ID_PORT_VLAN:
net: dsa: offload bridge port VLANs on foreign interfaces DSA now explicitly handles VLANs installed with the 'self' flag on the bridge as host VLANs, instead of just replicating every bridge port VLAN also on the CPU port and never deleting it, which is what it did before. However, this leaves a corner case uncovered, as explained by Tobias Waldekranz: https://patchwork.kernel.org/project/netdevbpf/patch/20220209213044.2353153-6-vladimir.oltean@nxp.com/#24735260 Forwarding towards a bridge port VLAN installed on a bridge port foreign to DSA (separate NIC, Wi-Fi AP) used to work by virtue of the fact that DSA itself needed to have at least one port in that VLAN (therefore, it also had the CPU port in said VLAN). However, now that the CPU port may not be member of all VLANs that user ports are members of, we need to ensure this isn't the case if software forwarding to a foreign interface is required. The solution is to treat bridge port VLANs on standalone interfaces in the exact same way as host VLANs. From DSA's perspective, there is no difference between local termination and software forwarding; packets in that VLAN must reach the CPU in both cases. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-15 17:02:18 +00:00
if (dsa_port_offloads_bridge_port(dp, obj->orig_dev))
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
err = dsa_user_vlan_add(dev, obj, extack);
net: dsa: offload bridge port VLANs on foreign interfaces DSA now explicitly handles VLANs installed with the 'self' flag on the bridge as host VLANs, instead of just replicating every bridge port VLAN also on the CPU port and never deleting it, which is what it did before. However, this leaves a corner case uncovered, as explained by Tobias Waldekranz: https://patchwork.kernel.org/project/netdevbpf/patch/20220209213044.2353153-6-vladimir.oltean@nxp.com/#24735260 Forwarding towards a bridge port VLAN installed on a bridge port foreign to DSA (separate NIC, Wi-Fi AP) used to work by virtue of the fact that DSA itself needed to have at least one port in that VLAN (therefore, it also had the CPU port in said VLAN). However, now that the CPU port may not be member of all VLANs that user ports are members of, we need to ensure this isn't the case if software forwarding to a foreign interface is required. The solution is to treat bridge port VLANs on standalone interfaces in the exact same way as host VLANs. From DSA's perspective, there is no difference between local termination and software forwarding; packets in that VLAN must reach the CPU in both cases. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-15 17:02:18 +00:00
else
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
err = dsa_user_host_vlan_add(dev, obj, extack);
net: dsa: add support for switchdev VLAN objects Add new functions in DSA drivers to access hardware VLAN entries through SWITCHDEV_OBJ_PORT_VLAN objects: - port_pvid_get() and vlan_getnext() to dump a VLAN - port_vlan_del() to exclude a port from a VLAN - port_pvid_set() and port_vlan_add() to join a port to a VLAN The DSA infrastructure will ensure that each VLAN of the given range does not already belong to another bridge. If it does, it will fallback to software VLAN and won't program the hardware. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 16:52:17 +00:00
break;
net: dsa: add MRP support Add support for offloading MRP in HW. Currently implement the switchdev calls 'SWITCHDEV_OBJ_ID_MRP', 'SWITCHDEV_OBJ_ID_RING_ROLE_MRP', to allow to create MRP instances and to set the role of these instances. Add DSA_NOTIFIER_MRP_ADD/DEL and DSA_NOTIFIER_MRP_ADD/DEL_RING_ROLE which calls to .port_mrp_add/del and .port_mrp_add/del_ring_role in the DSA driver for the switch. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16 21:42:04 +00:00
case SWITCHDEV_OBJ_ID_MRP:
net: dsa: rename dsa_port_offloads_bridge to dsa_port_offloads_bridge_dev Currently the majority of dsa_port_bridge_dev_get() calls in drivers is just to check whether a port is under the bridge device provided as argument by the DSA API. We'd like to change that DSA API so that a more complex structure is provided as argument. To keep things more generic, and considering that the new complex structure will be provided by value and not by reference, direct comparisons between dp->bridge and the provided bridge will be broken. The generic way to do the checking would simply be to do something like dsa_port_offloads_bridge(dp, &bridge). But there's a problem, we already have a function named that way, which actually takes a bridge_dev net_device as argument. Rename it so that we can use dsa_port_offloads_bridge for something else. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-06 16:57:54 +00:00
if (!dsa_port_offloads_bridge_dev(dp, obj->orig_dev))
net: dsa: add MRP support Add support for offloading MRP in HW. Currently implement the switchdev calls 'SWITCHDEV_OBJ_ID_MRP', 'SWITCHDEV_OBJ_ID_RING_ROLE_MRP', to allow to create MRP instances and to set the role of these instances. Add DSA_NOTIFIER_MRP_ADD/DEL and DSA_NOTIFIER_MRP_ADD/DEL_RING_ROLE which calls to .port_mrp_add/del and .port_mrp_add/del_ring_role in the DSA driver for the switch. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16 21:42:04 +00:00
return -EOPNOTSUPP;
net: dsa: fix switchdev objects on bridge master mistakenly being applied on ports Tobias reports that after the blamed patch, VLAN objects being added to a bridge device are being added to all slave ports instead (swp2, swp3). ip link add br0 type bridge vlan_filtering 1 ip link set swp2 master br0 ip link set swp3 master br0 bridge vlan add dev br0 vid 100 self This is because the fix was too broad: we made dsa_port_offloads_netdev say "yes, I offload the br0 bridge" for all slave ports, but we didn't add the checks whether the switchdev object was in fact meant for the physical port or for the bridge itself. So we are reacting on events in a way in which we shouldn't. The reason why the fix was too broad is because the question itself, "does this DSA port offload this netdev", was too broad in the first place. The solution is to disambiguate the question and separate it into two different functions, one to be called for each switchdev attribute / object that has an orig_dev == net_bridge (dsa_port_offloads_bridge), and the other for orig_dev == net_bridge_port (*_offloads_bridge_port). In the case of VLAN objects on the bridge interface, this solves the problem because we know that VLAN objects are per bridge port and not per bridge. And when orig_dev is equal to the net_bridge, we offload it as a bridge, but not as a bridge port; that's how we are able to skip reacting on those events. Note that this is compatible with future plans to have explicit offloading of VLAN objects on the bridge interface as a bridge port (in DSA, this signifies that we should add that VLAN towards the CPU port). Fixes: 99b8202b179f ("net: dsa: fix SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING getting ignored") Reported-by: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com> Tested-by: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-07 10:21:56 +00:00
net: dsa: add MRP support Add support for offloading MRP in HW. Currently implement the switchdev calls 'SWITCHDEV_OBJ_ID_MRP', 'SWITCHDEV_OBJ_ID_RING_ROLE_MRP', to allow to create MRP instances and to set the role of these instances. Add DSA_NOTIFIER_MRP_ADD/DEL and DSA_NOTIFIER_MRP_ADD/DEL_RING_ROLE which calls to .port_mrp_add/del and .port_mrp_add/del_ring_role in the DSA driver for the switch. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16 21:42:04 +00:00
err = dsa_port_mrp_add(dp, SWITCHDEV_OBJ_MRP(obj));
break;
case SWITCHDEV_OBJ_ID_RING_ROLE_MRP:
net: dsa: rename dsa_port_offloads_bridge to dsa_port_offloads_bridge_dev Currently the majority of dsa_port_bridge_dev_get() calls in drivers is just to check whether a port is under the bridge device provided as argument by the DSA API. We'd like to change that DSA API so that a more complex structure is provided as argument. To keep things more generic, and considering that the new complex structure will be provided by value and not by reference, direct comparisons between dp->bridge and the provided bridge will be broken. The generic way to do the checking would simply be to do something like dsa_port_offloads_bridge(dp, &bridge). But there's a problem, we already have a function named that way, which actually takes a bridge_dev net_device as argument. Rename it so that we can use dsa_port_offloads_bridge for something else. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-06 16:57:54 +00:00
if (!dsa_port_offloads_bridge_dev(dp, obj->orig_dev))
net: dsa: add MRP support Add support for offloading MRP in HW. Currently implement the switchdev calls 'SWITCHDEV_OBJ_ID_MRP', 'SWITCHDEV_OBJ_ID_RING_ROLE_MRP', to allow to create MRP instances and to set the role of these instances. Add DSA_NOTIFIER_MRP_ADD/DEL and DSA_NOTIFIER_MRP_ADD/DEL_RING_ROLE which calls to .port_mrp_add/del and .port_mrp_add/del_ring_role in the DSA driver for the switch. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16 21:42:04 +00:00
return -EOPNOTSUPP;
net: dsa: fix switchdev objects on bridge master mistakenly being applied on ports Tobias reports that after the blamed patch, VLAN objects being added to a bridge device are being added to all slave ports instead (swp2, swp3). ip link add br0 type bridge vlan_filtering 1 ip link set swp2 master br0 ip link set swp3 master br0 bridge vlan add dev br0 vid 100 self This is because the fix was too broad: we made dsa_port_offloads_netdev say "yes, I offload the br0 bridge" for all slave ports, but we didn't add the checks whether the switchdev object was in fact meant for the physical port or for the bridge itself. So we are reacting on events in a way in which we shouldn't. The reason why the fix was too broad is because the question itself, "does this DSA port offload this netdev", was too broad in the first place. The solution is to disambiguate the question and separate it into two different functions, one to be called for each switchdev attribute / object that has an orig_dev == net_bridge (dsa_port_offloads_bridge), and the other for orig_dev == net_bridge_port (*_offloads_bridge_port). In the case of VLAN objects on the bridge interface, this solves the problem because we know that VLAN objects are per bridge port and not per bridge. And when orig_dev is equal to the net_bridge, we offload it as a bridge, but not as a bridge port; that's how we are able to skip reacting on those events. Note that this is compatible with future plans to have explicit offloading of VLAN objects on the bridge interface as a bridge port (in DSA, this signifies that we should add that VLAN towards the CPU port). Fixes: 99b8202b179f ("net: dsa: fix SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING getting ignored") Reported-by: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com> Tested-by: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-07 10:21:56 +00:00
net: dsa: add MRP support Add support for offloading MRP in HW. Currently implement the switchdev calls 'SWITCHDEV_OBJ_ID_MRP', 'SWITCHDEV_OBJ_ID_RING_ROLE_MRP', to allow to create MRP instances and to set the role of these instances. Add DSA_NOTIFIER_MRP_ADD/DEL and DSA_NOTIFIER_MRP_ADD/DEL_RING_ROLE which calls to .port_mrp_add/del and .port_mrp_add/del_ring_role in the DSA driver for the switch. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16 21:42:04 +00:00
err = dsa_port_mrp_add_ring_role(dp,
SWITCHDEV_OBJ_RING_ROLE_MRP(obj));
break;
net: dsa: add support for switchdev FDB objects Implement the switchdev_port_obj_{add,del,dump} functions in DSA to support the SWITCHDEV_OBJ_PORT_FDB objects. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-10 13:09:53 +00:00
default:
err = -EOPNOTSUPP;
break;
}
return err;
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_vlan_del(struct net_device *dev,
const struct switchdev_obj *obj)
net: dsa: add slave VLAN helpers Add dsa_slave_vlan_add and dsa_slave_vlan_del helpers to handle SWITCHDEV_OBJ_ID_PORT_VLAN switchdev objects. Also copy the switchdev_obj_port_vlan structure on add since we will modify it in future patches. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-25 17:25:17 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: install VLANs into the master's RX filter too Most DSA switch tags shift the EtherType to the right, causing the master to not parse the VLAN as VLAN. However, not all switches do that (example: tail tags, tag_8021q etc), and if the DSA master has "rx-vlan-filter: on" in ethtool -k, then we have a problem. Therefore, we could populate the VLAN table of the master, just in case (for some switches it will not make a difference), so that network I/O can work even with a VLAN filtering master. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21 00:10:29 +00:00
struct switchdev_obj_port_vlan *vlan;
net: dsa: add slave VLAN helpers Add dsa_slave_vlan_add and dsa_slave_vlan_del helpers to handle SWITCHDEV_OBJ_ID_PORT_VLAN switchdev objects. Also copy the switchdev_obj_port_vlan structure on add since we will modify it in future patches. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-25 17:25:17 +00:00
net: dsa: provide an option for drivers to always receive bridge VLANs DSA assumes that a bridge which has vlan filtering disabled is not vlan aware, and ignores all vlan configuration. However, the kernel software bridge code allows configuration in this state. This causes the kernel's idea of the bridge vlan state and the hardware state to disagree, so "bridge vlan show" indicates a correct configuration but the hardware lacks all configuration. Even worse, enabling vlan filtering on a DSA bridge immediately blocks all traffic which, given the output of "bridge vlan show", is very confusing. Provide an option that drivers can set to indicate they want to receive vlan configuration even when vlan filtering is disabled. At the very least, this is safe for Marvell DSA bridges, which do not look up ingress traffic in the VTU if the port is in 8021Q disabled state. It is also safe for the Ocelot switch family. Whether this change is suitable for all DSA bridges is not known. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-12 17:20:25 +00:00
if (dsa_port_skip_vlan_configuration(dp))
net: dsa: check bridge VLAN in slave operations The bridge VLANs are not offloaded by dsa_port_vlan_* if the port is not bridged or if its bridge is not VLAN aware. This is a good thing but other corners of DSA, such as the tag_8021q driver, may need to program VLANs regardless the bridge state. And also because bridge_dev is specific to user ports anyway, move these checks were it belongs, one layer up in the slave code. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Suggested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-25 17:25:18 +00:00
return 0;
net: dsa: install VLANs into the master's RX filter too Most DSA switch tags shift the EtherType to the right, causing the master to not parse the VLAN as VLAN. However, not all switches do that (example: tail tags, tag_8021q etc), and if the DSA master has "rx-vlan-filter: on" in ethtool -k, then we have a problem. Therefore, we could populate the VLAN table of the master, just in case (for some switches it will not make a difference), so that network I/O can work even with a VLAN filtering master. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21 00:10:29 +00:00
vlan = SWITCHDEV_OBJ_PORT_VLAN(obj);
net: dsa: add explicit support for host bridge VLANs Currently, DSA programs VLANs on shared (DSA and CPU) ports each time it does so on user ports. This is good for basic functionality but has several limitations: - the VLAN group which must reach the CPU may be radically different from the VLAN group that must be autonomously forwarded by the switch. In other words, the admin may want to isolate noisy stations and avoid traffic from them going to the control processor of the switch, where it would just waste useless cycles. The bridge already supports independent control of VLAN groups on bridge ports and on the bridge itself, and when VLAN-aware, it will drop packets in software anyway if their VID isn't added as a 'self' entry towards the bridge device. - Replaying host FDB entries may depend, for some drivers like mv88e6xxx, on replaying the host VLANs as well. The 2 VLAN groups are approximately the same in most regular cases, but there are corner cases when timing matters, and DSA's approximation of replicating VLANs on shared ports simply does not work. - If a user makes the bridge (implicitly the CPU port) join a VLAN by accident, there is no way for the CPU port to isolate itself from that noisy VLAN except by rebooting the system. This is because for each VLAN added on a user port, DSA will add it on shared ports too, but for each VLAN deletion on a user port, it will remain installed on shared ports, since DSA has no good indication of whether the VLAN is still in use or not. Now that the bridge driver emits well-balanced SWITCHDEV_OBJ_ID_PORT_VLAN addition and removal events, DSA has a simple and straightforward task of separating the bridge port VLANs (these have an orig_dev which is a DSA slave interface, or a LAG interface) from the host VLANs (these have an orig_dev which is a bridge interface), and to keep a simple reference count of each VID on each shared port. Forwarding VLANs must be installed on the bridge ports and on all DSA ports interconnecting them. We don't have a good view of the exact topology, so we simply install forwarding VLANs on all DSA ports, which is what has been done until now. Host VLANs must be installed primarily on the dedicated CPU port of each bridge port. More subtly, they must also be installed on upstream-facing and downstream-facing DSA ports that are connecting the bridge ports and the CPU. This ensures that the mv88e6xxx's problem (VID of host FDB entry may be absent from VTU) is still addressed even if that switch is in a cross-chip setup, and it has no local CPU port. Therefore: - user ports contain only bridge port (forwarding) VLANs, and no refcounting is necessary - DSA ports contain both forwarding and host VLANs. Refcounting is necessary among these 2 types. - CPU ports contain only host VLANs. Refcounting is also necessary. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-15 17:02:17 +00:00
return dsa_port_vlan_del(dp, vlan);
}
net: dsa: install VLANs into the master's RX filter too Most DSA switch tags shift the EtherType to the right, causing the master to not parse the VLAN as VLAN. However, not all switches do that (example: tail tags, tag_8021q etc), and if the DSA master has "rx-vlan-filter: on" in ethtool -k, then we have a problem. Therefore, we could populate the VLAN table of the master, just in case (for some switches it will not make a difference), so that network I/O can work even with a VLAN filtering master. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21 00:10:29 +00:00
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_host_vlan_del(struct net_device *dev,
const struct switchdev_obj *obj)
net: dsa: add explicit support for host bridge VLANs Currently, DSA programs VLANs on shared (DSA and CPU) ports each time it does so on user ports. This is good for basic functionality but has several limitations: - the VLAN group which must reach the CPU may be radically different from the VLAN group that must be autonomously forwarded by the switch. In other words, the admin may want to isolate noisy stations and avoid traffic from them going to the control processor of the switch, where it would just waste useless cycles. The bridge already supports independent control of VLAN groups on bridge ports and on the bridge itself, and when VLAN-aware, it will drop packets in software anyway if their VID isn't added as a 'self' entry towards the bridge device. - Replaying host FDB entries may depend, for some drivers like mv88e6xxx, on replaying the host VLANs as well. The 2 VLAN groups are approximately the same in most regular cases, but there are corner cases when timing matters, and DSA's approximation of replicating VLANs on shared ports simply does not work. - If a user makes the bridge (implicitly the CPU port) join a VLAN by accident, there is no way for the CPU port to isolate itself from that noisy VLAN except by rebooting the system. This is because for each VLAN added on a user port, DSA will add it on shared ports too, but for each VLAN deletion on a user port, it will remain installed on shared ports, since DSA has no good indication of whether the VLAN is still in use or not. Now that the bridge driver emits well-balanced SWITCHDEV_OBJ_ID_PORT_VLAN addition and removal events, DSA has a simple and straightforward task of separating the bridge port VLANs (these have an orig_dev which is a DSA slave interface, or a LAG interface) from the host VLANs (these have an orig_dev which is a bridge interface), and to keep a simple reference count of each VID on each shared port. Forwarding VLANs must be installed on the bridge ports and on all DSA ports interconnecting them. We don't have a good view of the exact topology, so we simply install forwarding VLANs on all DSA ports, which is what has been done until now. Host VLANs must be installed primarily on the dedicated CPU port of each bridge port. More subtly, they must also be installed on upstream-facing and downstream-facing DSA ports that are connecting the bridge ports and the CPU. This ensures that the mv88e6xxx's problem (VID of host FDB entry may be absent from VTU) is still addressed even if that switch is in a cross-chip setup, and it has no local CPU port. Therefore: - user ports contain only bridge port (forwarding) VLANs, and no refcounting is necessary - DSA ports contain both forwarding and host VLANs. Refcounting is necessary among these 2 types. - CPU ports contain only host VLANs. Refcounting is also necessary. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-15 17:02:17 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: add explicit support for host bridge VLANs Currently, DSA programs VLANs on shared (DSA and CPU) ports each time it does so on user ports. This is good for basic functionality but has several limitations: - the VLAN group which must reach the CPU may be radically different from the VLAN group that must be autonomously forwarded by the switch. In other words, the admin may want to isolate noisy stations and avoid traffic from them going to the control processor of the switch, where it would just waste useless cycles. The bridge already supports independent control of VLAN groups on bridge ports and on the bridge itself, and when VLAN-aware, it will drop packets in software anyway if their VID isn't added as a 'self' entry towards the bridge device. - Replaying host FDB entries may depend, for some drivers like mv88e6xxx, on replaying the host VLANs as well. The 2 VLAN groups are approximately the same in most regular cases, but there are corner cases when timing matters, and DSA's approximation of replicating VLANs on shared ports simply does not work. - If a user makes the bridge (implicitly the CPU port) join a VLAN by accident, there is no way for the CPU port to isolate itself from that noisy VLAN except by rebooting the system. This is because for each VLAN added on a user port, DSA will add it on shared ports too, but for each VLAN deletion on a user port, it will remain installed on shared ports, since DSA has no good indication of whether the VLAN is still in use or not. Now that the bridge driver emits well-balanced SWITCHDEV_OBJ_ID_PORT_VLAN addition and removal events, DSA has a simple and straightforward task of separating the bridge port VLANs (these have an orig_dev which is a DSA slave interface, or a LAG interface) from the host VLANs (these have an orig_dev which is a bridge interface), and to keep a simple reference count of each VID on each shared port. Forwarding VLANs must be installed on the bridge ports and on all DSA ports interconnecting them. We don't have a good view of the exact topology, so we simply install forwarding VLANs on all DSA ports, which is what has been done until now. Host VLANs must be installed primarily on the dedicated CPU port of each bridge port. More subtly, they must also be installed on upstream-facing and downstream-facing DSA ports that are connecting the bridge ports and the CPU. This ensures that the mv88e6xxx's problem (VID of host FDB entry may be absent from VTU) is still addressed even if that switch is in a cross-chip setup, and it has no local CPU port. Therefore: - user ports contain only bridge port (forwarding) VLANs, and no refcounting is necessary - DSA ports contain both forwarding and host VLANs. Refcounting is necessary among these 2 types. - CPU ports contain only host VLANs. Refcounting is also necessary. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-15 17:02:17 +00:00
struct switchdev_obj_port_vlan *vlan;
net: dsa: install VLANs into the master's RX filter too Most DSA switch tags shift the EtherType to the right, causing the master to not parse the VLAN as VLAN. However, not all switches do that (example: tail tags, tag_8021q etc), and if the DSA master has "rx-vlan-filter: on" in ethtool -k, then we have a problem. Therefore, we could populate the VLAN table of the master, just in case (for some switches it will not make a difference), so that network I/O can work even with a VLAN filtering master. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21 00:10:29 +00:00
net: dsa: offload bridge port VLANs on foreign interfaces DSA now explicitly handles VLANs installed with the 'self' flag on the bridge as host VLANs, instead of just replicating every bridge port VLAN also on the CPU port and never deleting it, which is what it did before. However, this leaves a corner case uncovered, as explained by Tobias Waldekranz: https://patchwork.kernel.org/project/netdevbpf/patch/20220209213044.2353153-6-vladimir.oltean@nxp.com/#24735260 Forwarding towards a bridge port VLAN installed on a bridge port foreign to DSA (separate NIC, Wi-Fi AP) used to work by virtue of the fact that DSA itself needed to have at least one port in that VLAN (therefore, it also had the CPU port in said VLAN). However, now that the CPU port may not be member of all VLANs that user ports are members of, we need to ensure this isn't the case if software forwarding to a foreign interface is required. The solution is to treat bridge port VLANs on standalone interfaces in the exact same way as host VLANs. From DSA's perspective, there is no difference between local termination and software forwarding; packets in that VLAN must reach the CPU in both cases. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-15 17:02:18 +00:00
/* Do nothing if this is a software bridge */
if (!dp->bridge)
return -EOPNOTSUPP;
net: dsa: add explicit support for host bridge VLANs Currently, DSA programs VLANs on shared (DSA and CPU) ports each time it does so on user ports. This is good for basic functionality but has several limitations: - the VLAN group which must reach the CPU may be radically different from the VLAN group that must be autonomously forwarded by the switch. In other words, the admin may want to isolate noisy stations and avoid traffic from them going to the control processor of the switch, where it would just waste useless cycles. The bridge already supports independent control of VLAN groups on bridge ports and on the bridge itself, and when VLAN-aware, it will drop packets in software anyway if their VID isn't added as a 'self' entry towards the bridge device. - Replaying host FDB entries may depend, for some drivers like mv88e6xxx, on replaying the host VLANs as well. The 2 VLAN groups are approximately the same in most regular cases, but there are corner cases when timing matters, and DSA's approximation of replicating VLANs on shared ports simply does not work. - If a user makes the bridge (implicitly the CPU port) join a VLAN by accident, there is no way for the CPU port to isolate itself from that noisy VLAN except by rebooting the system. This is because for each VLAN added on a user port, DSA will add it on shared ports too, but for each VLAN deletion on a user port, it will remain installed on shared ports, since DSA has no good indication of whether the VLAN is still in use or not. Now that the bridge driver emits well-balanced SWITCHDEV_OBJ_ID_PORT_VLAN addition and removal events, DSA has a simple and straightforward task of separating the bridge port VLANs (these have an orig_dev which is a DSA slave interface, or a LAG interface) from the host VLANs (these have an orig_dev which is a bridge interface), and to keep a simple reference count of each VID on each shared port. Forwarding VLANs must be installed on the bridge ports and on all DSA ports interconnecting them. We don't have a good view of the exact topology, so we simply install forwarding VLANs on all DSA ports, which is what has been done until now. Host VLANs must be installed primarily on the dedicated CPU port of each bridge port. More subtly, they must also be installed on upstream-facing and downstream-facing DSA ports that are connecting the bridge ports and the CPU. This ensures that the mv88e6xxx's problem (VID of host FDB entry may be absent from VTU) is still addressed even if that switch is in a cross-chip setup, and it has no local CPU port. Therefore: - user ports contain only bridge port (forwarding) VLANs, and no refcounting is necessary - DSA ports contain both forwarding and host VLANs. Refcounting is necessary among these 2 types. - CPU ports contain only host VLANs. Refcounting is also necessary. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-15 17:02:17 +00:00
if (dsa_port_skip_vlan_configuration(dp))
return 0;
vlan = SWITCHDEV_OBJ_PORT_VLAN(obj);
return dsa_port_host_vlan_del(dp, vlan);
net: dsa: add slave VLAN helpers Add dsa_slave_vlan_add and dsa_slave_vlan_del helpers to handle SWITCHDEV_OBJ_ID_PORT_VLAN switchdev objects. Also copy the switchdev_obj_port_vlan structure on add since we will modify it in future patches. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-25 17:25:17 +00:00
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_port_obj_del(struct net_device *dev, const void *ctx,
const struct switchdev_obj *obj)
net: dsa: add support for switchdev FDB objects Implement the switchdev_port_obj_{add,del,dump} functions in DSA to support the SWITCHDEV_OBJ_PORT_FDB objects. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-10 13:09:53 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: add support for switchdev FDB objects Implement the switchdev_port_obj_{add,del,dump} functions in DSA to support the SWITCHDEV_OBJ_PORT_FDB objects. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-10 13:09:53 +00:00
int err;
net: bridge: ignore switchdev events for LAG ports which didn't request replay There is a slight inconvenience in the switchdev replay helpers added recently, and this is when: ip link add br0 type bridge ip link add bond0 type bond ip link set bond0 master br0 bridge vlan add dev bond0 vid 100 ip link set swp0 master bond0 ip link set swp1 master bond0 Since the underlying driver (currently only DSA) asks for a replay of VLANs when swp0 and swp1 join the LAG because it is bridged, what will happen is that DSA will try to react twice on the VLAN event for swp0. This is not really a huge problem right now, because most drivers accept duplicates since the bridge itself does, but it will become a problem when we add support for replaying switchdev object deletions. Let's fix this by adding a blank void *ctx in the replay helpers, which will be passed on by the bridge in the switchdev notifications. If the context is NULL, everything is the same as before. But if the context is populated with a valid pointer, the underlying switchdev driver (currently DSA) can use the pointer to 'see through' the bridge port (which in the example above is bond0) and 'know' that the event is only for a particular physical port offloading that bridge port, and not for all of them. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-27 11:54:25 +00:00
if (ctx && ctx != dp)
return 0;
switchdev: push object ID back to object structure Suggested-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 09:03:46 +00:00
switch (obj->id) {
net: dsa: add MDB support Add SWITCHDEV_OBJ_ID_PORT_MDB support to the DSA layer. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31 15:50:03 +00:00
case SWITCHDEV_OBJ_ID_PORT_MDB:
net: dsa: fix switchdev objects on bridge master mistakenly being applied on ports Tobias reports that after the blamed patch, VLAN objects being added to a bridge device are being added to all slave ports instead (swp2, swp3). ip link add br0 type bridge vlan_filtering 1 ip link set swp2 master br0 ip link set swp3 master br0 bridge vlan add dev br0 vid 100 self This is because the fix was too broad: we made dsa_port_offloads_netdev say "yes, I offload the br0 bridge" for all slave ports, but we didn't add the checks whether the switchdev object was in fact meant for the physical port or for the bridge itself. So we are reacting on events in a way in which we shouldn't. The reason why the fix was too broad is because the question itself, "does this DSA port offload this netdev", was too broad in the first place. The solution is to disambiguate the question and separate it into two different functions, one to be called for each switchdev attribute / object that has an orig_dev == net_bridge (dsa_port_offloads_bridge), and the other for orig_dev == net_bridge_port (*_offloads_bridge_port). In the case of VLAN objects on the bridge interface, this solves the problem because we know that VLAN objects are per bridge port and not per bridge. And when orig_dev is equal to the net_bridge, we offload it as a bridge, but not as a bridge port; that's how we are able to skip reacting on those events. Note that this is compatible with future plans to have explicit offloading of VLAN objects on the bridge interface as a bridge port (in DSA, this signifies that we should add that VLAN towards the CPU port). Fixes: 99b8202b179f ("net: dsa: fix SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING getting ignored") Reported-by: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com> Tested-by: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-07 10:21:56 +00:00
if (!dsa_port_offloads_bridge_port(dp, obj->orig_dev))
net: dsa: use switchdev handle helpers Get rid of the dsa_slave_switchdev_port_{attr_set,obj}_event functions in favor of the switchdev_handle_port_{attr_set,obj_add,obj_del} helpers which recurse into the lower devices of the target interface. This has the benefit of being aware of the operations made on the bridge device itself, where orig_dev is the bridge, and dev is the slave. This can be used later to configure the hardware switches. Only VLAN and (port) MDB objects not directly targeting the slave device are unsupported at the moment, so skip this case in their respective case statements. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14 17:49:22 +00:00
return -EOPNOTSUPP;
net: dsa: fix switchdev objects on bridge master mistakenly being applied on ports Tobias reports that after the blamed patch, VLAN objects being added to a bridge device are being added to all slave ports instead (swp2, swp3). ip link add br0 type bridge vlan_filtering 1 ip link set swp2 master br0 ip link set swp3 master br0 bridge vlan add dev br0 vid 100 self This is because the fix was too broad: we made dsa_port_offloads_netdev say "yes, I offload the br0 bridge" for all slave ports, but we didn't add the checks whether the switchdev object was in fact meant for the physical port or for the bridge itself. So we are reacting on events in a way in which we shouldn't. The reason why the fix was too broad is because the question itself, "does this DSA port offload this netdev", was too broad in the first place. The solution is to disambiguate the question and separate it into two different functions, one to be called for each switchdev attribute / object that has an orig_dev == net_bridge (dsa_port_offloads_bridge), and the other for orig_dev == net_bridge_port (*_offloads_bridge_port). In the case of VLAN objects on the bridge interface, this solves the problem because we know that VLAN objects are per bridge port and not per bridge. And when orig_dev is equal to the net_bridge, we offload it as a bridge, but not as a bridge port; that's how we are able to skip reacting on those events. Note that this is compatible with future plans to have explicit offloading of VLAN objects on the bridge interface as a bridge port (in DSA, this signifies that we should add that VLAN towards the CPU port). Fixes: 99b8202b179f ("net: dsa: fix SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING getting ignored") Reported-by: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com> Tested-by: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-07 10:21:56 +00:00
net: dsa: change scope of MDB handlers Change the scope of the switchdev MDB object handlers from the DSA slave device to the generic DSA port, so that the future port-wide API can also be used for other port types, such as CPU and DSA links. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:40 +00:00
err = dsa_port_mdb_del(dp, SWITCHDEV_OBJ_PORT_MDB(obj));
net: dsa: add MDB support Add SWITCHDEV_OBJ_ID_PORT_MDB support to the DSA layer. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31 15:50:03 +00:00
break;
net: dsa: slave: Handle switchdev host mdb add/del Add code to handle switchdev host mdb add/del. Since DSA uses one of the switch ports as a transport to the host, we just need to add an MDB on this port. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-09 22:11:00 +00:00
case SWITCHDEV_OBJ_ID_HOST_MDB:
net: dsa: rename dsa_port_offloads_bridge to dsa_port_offloads_bridge_dev Currently the majority of dsa_port_bridge_dev_get() calls in drivers is just to check whether a port is under the bridge device provided as argument by the DSA API. We'd like to change that DSA API so that a more complex structure is provided as argument. To keep things more generic, and considering that the new complex structure will be provided by value and not by reference, direct comparisons between dp->bridge and the provided bridge will be broken. The generic way to do the checking would simply be to do something like dsa_port_offloads_bridge(dp, &bridge). But there's a problem, we already have a function named that way, which actually takes a bridge_dev net_device as argument. Rename it so that we can use dsa_port_offloads_bridge for something else. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-06 16:57:54 +00:00
if (!dsa_port_offloads_bridge_dev(dp, obj->orig_dev))
net: dsa: fix switchdev objects on bridge master mistakenly being applied on ports Tobias reports that after the blamed patch, VLAN objects being added to a bridge device are being added to all slave ports instead (swp2, swp3). ip link add br0 type bridge vlan_filtering 1 ip link set swp2 master br0 ip link set swp3 master br0 bridge vlan add dev br0 vid 100 self This is because the fix was too broad: we made dsa_port_offloads_netdev say "yes, I offload the br0 bridge" for all slave ports, but we didn't add the checks whether the switchdev object was in fact meant for the physical port or for the bridge itself. So we are reacting on events in a way in which we shouldn't. The reason why the fix was too broad is because the question itself, "does this DSA port offload this netdev", was too broad in the first place. The solution is to disambiguate the question and separate it into two different functions, one to be called for each switchdev attribute / object that has an orig_dev == net_bridge (dsa_port_offloads_bridge), and the other for orig_dev == net_bridge_port (*_offloads_bridge_port). In the case of VLAN objects on the bridge interface, this solves the problem because we know that VLAN objects are per bridge port and not per bridge. And when orig_dev is equal to the net_bridge, we offload it as a bridge, but not as a bridge port; that's how we are able to skip reacting on those events. Note that this is compatible with future plans to have explicit offloading of VLAN objects on the bridge interface as a bridge port (in DSA, this signifies that we should add that VLAN towards the CPU port). Fixes: 99b8202b179f ("net: dsa: fix SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING getting ignored") Reported-by: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com> Tested-by: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-07 10:21:56 +00:00
return -EOPNOTSUPP;
net: dsa: rename the host FDB and MDB methods to contain the "bridge" namespace We are preparing to add API in port.c that adds FDB and MDB entries that correspond to the port's standalone database. Rename the existing methods to make it clear that the FDB and MDB entries offloaded come from the bridge database. Since the function names lengthen in dsa_slave_switchdev_event_work(), we place "addr" and "vid" in temporary variables, to shorten those. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 19:14:09 +00:00
err = dsa_port_bridge_host_mdb_del(dp, SWITCHDEV_OBJ_PORT_MDB(obj));
net: dsa: slave: Handle switchdev host mdb add/del Add code to handle switchdev host mdb add/del. Since DSA uses one of the switch ports as a transport to the host, we just need to add an MDB on this port. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-09 22:11:00 +00:00
break;
switchdev: rename SWITCHDEV_OBJ_* enum values to SWITCHDEV_OBJ_ID_* Suggested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 09:03:41 +00:00
case SWITCHDEV_OBJ_ID_PORT_VLAN:
net: dsa: offload bridge port VLANs on foreign interfaces DSA now explicitly handles VLANs installed with the 'self' flag on the bridge as host VLANs, instead of just replicating every bridge port VLAN also on the CPU port and never deleting it, which is what it did before. However, this leaves a corner case uncovered, as explained by Tobias Waldekranz: https://patchwork.kernel.org/project/netdevbpf/patch/20220209213044.2353153-6-vladimir.oltean@nxp.com/#24735260 Forwarding towards a bridge port VLAN installed on a bridge port foreign to DSA (separate NIC, Wi-Fi AP) used to work by virtue of the fact that DSA itself needed to have at least one port in that VLAN (therefore, it also had the CPU port in said VLAN). However, now that the CPU port may not be member of all VLANs that user ports are members of, we need to ensure this isn't the case if software forwarding to a foreign interface is required. The solution is to treat bridge port VLANs on standalone interfaces in the exact same way as host VLANs. From DSA's perspective, there is no difference between local termination and software forwarding; packets in that VLAN must reach the CPU in both cases. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-15 17:02:18 +00:00
if (dsa_port_offloads_bridge_port(dp, obj->orig_dev))
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
err = dsa_user_vlan_del(dev, obj);
net: dsa: offload bridge port VLANs on foreign interfaces DSA now explicitly handles VLANs installed with the 'self' flag on the bridge as host VLANs, instead of just replicating every bridge port VLAN also on the CPU port and never deleting it, which is what it did before. However, this leaves a corner case uncovered, as explained by Tobias Waldekranz: https://patchwork.kernel.org/project/netdevbpf/patch/20220209213044.2353153-6-vladimir.oltean@nxp.com/#24735260 Forwarding towards a bridge port VLAN installed on a bridge port foreign to DSA (separate NIC, Wi-Fi AP) used to work by virtue of the fact that DSA itself needed to have at least one port in that VLAN (therefore, it also had the CPU port in said VLAN). However, now that the CPU port may not be member of all VLANs that user ports are members of, we need to ensure this isn't the case if software forwarding to a foreign interface is required. The solution is to treat bridge port VLANs on standalone interfaces in the exact same way as host VLANs. From DSA's perspective, there is no difference between local termination and software forwarding; packets in that VLAN must reach the CPU in both cases. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-15 17:02:18 +00:00
else
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
err = dsa_user_host_vlan_del(dev, obj);
net: dsa: add support for switchdev VLAN objects Add new functions in DSA drivers to access hardware VLAN entries through SWITCHDEV_OBJ_PORT_VLAN objects: - port_pvid_get() and vlan_getnext() to dump a VLAN - port_vlan_del() to exclude a port from a VLAN - port_pvid_set() and port_vlan_add() to join a port to a VLAN The DSA infrastructure will ensure that each VLAN of the given range does not already belong to another bridge. If it does, it will fallback to software VLAN and won't program the hardware. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 16:52:17 +00:00
break;
net: dsa: add MRP support Add support for offloading MRP in HW. Currently implement the switchdev calls 'SWITCHDEV_OBJ_ID_MRP', 'SWITCHDEV_OBJ_ID_RING_ROLE_MRP', to allow to create MRP instances and to set the role of these instances. Add DSA_NOTIFIER_MRP_ADD/DEL and DSA_NOTIFIER_MRP_ADD/DEL_RING_ROLE which calls to .port_mrp_add/del and .port_mrp_add/del_ring_role in the DSA driver for the switch. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16 21:42:04 +00:00
case SWITCHDEV_OBJ_ID_MRP:
net: dsa: rename dsa_port_offloads_bridge to dsa_port_offloads_bridge_dev Currently the majority of dsa_port_bridge_dev_get() calls in drivers is just to check whether a port is under the bridge device provided as argument by the DSA API. We'd like to change that DSA API so that a more complex structure is provided as argument. To keep things more generic, and considering that the new complex structure will be provided by value and not by reference, direct comparisons between dp->bridge and the provided bridge will be broken. The generic way to do the checking would simply be to do something like dsa_port_offloads_bridge(dp, &bridge). But there's a problem, we already have a function named that way, which actually takes a bridge_dev net_device as argument. Rename it so that we can use dsa_port_offloads_bridge for something else. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-06 16:57:54 +00:00
if (!dsa_port_offloads_bridge_dev(dp, obj->orig_dev))
net: dsa: add MRP support Add support for offloading MRP in HW. Currently implement the switchdev calls 'SWITCHDEV_OBJ_ID_MRP', 'SWITCHDEV_OBJ_ID_RING_ROLE_MRP', to allow to create MRP instances and to set the role of these instances. Add DSA_NOTIFIER_MRP_ADD/DEL and DSA_NOTIFIER_MRP_ADD/DEL_RING_ROLE which calls to .port_mrp_add/del and .port_mrp_add/del_ring_role in the DSA driver for the switch. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16 21:42:04 +00:00
return -EOPNOTSUPP;
net: dsa: fix switchdev objects on bridge master mistakenly being applied on ports Tobias reports that after the blamed patch, VLAN objects being added to a bridge device are being added to all slave ports instead (swp2, swp3). ip link add br0 type bridge vlan_filtering 1 ip link set swp2 master br0 ip link set swp3 master br0 bridge vlan add dev br0 vid 100 self This is because the fix was too broad: we made dsa_port_offloads_netdev say "yes, I offload the br0 bridge" for all slave ports, but we didn't add the checks whether the switchdev object was in fact meant for the physical port or for the bridge itself. So we are reacting on events in a way in which we shouldn't. The reason why the fix was too broad is because the question itself, "does this DSA port offload this netdev", was too broad in the first place. The solution is to disambiguate the question and separate it into two different functions, one to be called for each switchdev attribute / object that has an orig_dev == net_bridge (dsa_port_offloads_bridge), and the other for orig_dev == net_bridge_port (*_offloads_bridge_port). In the case of VLAN objects on the bridge interface, this solves the problem because we know that VLAN objects are per bridge port and not per bridge. And when orig_dev is equal to the net_bridge, we offload it as a bridge, but not as a bridge port; that's how we are able to skip reacting on those events. Note that this is compatible with future plans to have explicit offloading of VLAN objects on the bridge interface as a bridge port (in DSA, this signifies that we should add that VLAN towards the CPU port). Fixes: 99b8202b179f ("net: dsa: fix SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING getting ignored") Reported-by: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com> Tested-by: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-07 10:21:56 +00:00
net: dsa: add MRP support Add support for offloading MRP in HW. Currently implement the switchdev calls 'SWITCHDEV_OBJ_ID_MRP', 'SWITCHDEV_OBJ_ID_RING_ROLE_MRP', to allow to create MRP instances and to set the role of these instances. Add DSA_NOTIFIER_MRP_ADD/DEL and DSA_NOTIFIER_MRP_ADD/DEL_RING_ROLE which calls to .port_mrp_add/del and .port_mrp_add/del_ring_role in the DSA driver for the switch. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16 21:42:04 +00:00
err = dsa_port_mrp_del(dp, SWITCHDEV_OBJ_MRP(obj));
break;
case SWITCHDEV_OBJ_ID_RING_ROLE_MRP:
net: dsa: rename dsa_port_offloads_bridge to dsa_port_offloads_bridge_dev Currently the majority of dsa_port_bridge_dev_get() calls in drivers is just to check whether a port is under the bridge device provided as argument by the DSA API. We'd like to change that DSA API so that a more complex structure is provided as argument. To keep things more generic, and considering that the new complex structure will be provided by value and not by reference, direct comparisons between dp->bridge and the provided bridge will be broken. The generic way to do the checking would simply be to do something like dsa_port_offloads_bridge(dp, &bridge). But there's a problem, we already have a function named that way, which actually takes a bridge_dev net_device as argument. Rename it so that we can use dsa_port_offloads_bridge for something else. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-06 16:57:54 +00:00
if (!dsa_port_offloads_bridge_dev(dp, obj->orig_dev))
net: dsa: add MRP support Add support for offloading MRP in HW. Currently implement the switchdev calls 'SWITCHDEV_OBJ_ID_MRP', 'SWITCHDEV_OBJ_ID_RING_ROLE_MRP', to allow to create MRP instances and to set the role of these instances. Add DSA_NOTIFIER_MRP_ADD/DEL and DSA_NOTIFIER_MRP_ADD/DEL_RING_ROLE which calls to .port_mrp_add/del and .port_mrp_add/del_ring_role in the DSA driver for the switch. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16 21:42:04 +00:00
return -EOPNOTSUPP;
net: dsa: fix switchdev objects on bridge master mistakenly being applied on ports Tobias reports that after the blamed patch, VLAN objects being added to a bridge device are being added to all slave ports instead (swp2, swp3). ip link add br0 type bridge vlan_filtering 1 ip link set swp2 master br0 ip link set swp3 master br0 bridge vlan add dev br0 vid 100 self This is because the fix was too broad: we made dsa_port_offloads_netdev say "yes, I offload the br0 bridge" for all slave ports, but we didn't add the checks whether the switchdev object was in fact meant for the physical port or for the bridge itself. So we are reacting on events in a way in which we shouldn't. The reason why the fix was too broad is because the question itself, "does this DSA port offload this netdev", was too broad in the first place. The solution is to disambiguate the question and separate it into two different functions, one to be called for each switchdev attribute / object that has an orig_dev == net_bridge (dsa_port_offloads_bridge), and the other for orig_dev == net_bridge_port (*_offloads_bridge_port). In the case of VLAN objects on the bridge interface, this solves the problem because we know that VLAN objects are per bridge port and not per bridge. And when orig_dev is equal to the net_bridge, we offload it as a bridge, but not as a bridge port; that's how we are able to skip reacting on those events. Note that this is compatible with future plans to have explicit offloading of VLAN objects on the bridge interface as a bridge port (in DSA, this signifies that we should add that VLAN towards the CPU port). Fixes: 99b8202b179f ("net: dsa: fix SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING getting ignored") Reported-by: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com> Tested-by: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-07 10:21:56 +00:00
net: dsa: add MRP support Add support for offloading MRP in HW. Currently implement the switchdev calls 'SWITCHDEV_OBJ_ID_MRP', 'SWITCHDEV_OBJ_ID_RING_ROLE_MRP', to allow to create MRP instances and to set the role of these instances. Add DSA_NOTIFIER_MRP_ADD/DEL and DSA_NOTIFIER_MRP_ADD/DEL_RING_ROLE which calls to .port_mrp_add/del and .port_mrp_add/del_ring_role in the DSA driver for the switch. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16 21:42:04 +00:00
err = dsa_port_mrp_del_ring_role(dp,
SWITCHDEV_OBJ_RING_ROLE_MRP(obj));
break;
net: dsa: add support for switchdev FDB objects Implement the switchdev_port_obj_{add,del,dump} functions in DSA to support the SWITCHDEV_OBJ_PORT_FDB objects. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-10 13:09:53 +00:00
default:
err = -EOPNOTSUPP;
break;
}
return err;
}
net: dsa: remove "inline" from dsa_user_netpoll_send_skb() The convention is to not use "inline" functions in C files, and let the compiler decide whether to inline or not. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240206112927.4134375-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-06 11:29:26 +00:00
static netdev_tx_t dsa_user_netpoll_send_skb(struct net_device *dev,
struct sk_buff *skb)
net: dsa: Add netconsole support Add support for using DSA slave network devices with netconsole, which requires us to allocate and free custom netpoll instances and invoke the parent network device poll controller callback. In order for netconsole to work, we need to construct the DSA tag, but not queue the skb for transmission on the master network device xmit function. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-31 18:42:57 +00:00
{
#ifdef CONFIG_NET_POLL_CONTROLLER
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_user_priv *p = netdev_priv(dev);
net: dsa: better scoping of slave functions A few DSA slave functions take a dsa_slave_priv pointer as first argument, whereas the scope of the slave.c functions is the slave net_device structure. Fix this and rename dsa_netpoll_send_skb to dsa_slave_netpoll_send_skb. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20 23:31:57 +00:00
netpoll: accept NULL np argument in netpoll_send_skb() netpoll_send_skb() callers seem to leak skb if the np pointer is NULL. While this should not happen, we can make the code more robust. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-07 16:32:21 +00:00
return netpoll_send_skb(p->netpoll, skb);
net: dsa: Add netconsole support Add support for using DSA slave network devices with netconsole, which requires us to allocate and free custom netpoll instances and invoke the parent network device poll controller callback. In order for netconsole to work, we need to construct the DSA tag, but not queue the skb for transmission on the master network device xmit function. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-31 18:42:57 +00:00
#else
BUG();
return NETDEV_TX_OK;
netpoll: accept NULL np argument in netpoll_send_skb() netpoll_send_skb() callers seem to leak skb if the np pointer is NULL. While this should not happen, we can make the code more robust. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-07 16:32:21 +00:00
#endif
net: dsa: Add netconsole support Add support for using DSA slave network devices with netconsole, which requires us to allocate and free custom netpoll instances and invoke the parent network device poll controller callback. In order for netconsole to work, we need to construct the DSA tag, but not queue the skb for transmission on the master network device xmit function. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-31 18:42:57 +00:00
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static void dsa_skb_tx_timestamp(struct dsa_user_priv *p,
net: dsa: forward timestamping callbacks to switch drivers Forward the rx/tx timestamp machinery from the dsa infrastructure to the switch driver. On the rx side, defer delivery of skbs until we have an rx timestamp. This mimicks the behavior of skb_defer_rx_timestamp. On the tx side, identify PTP packets, clone them, and pass them to the underlying switch driver before we transmit. This mimicks the behavior of skb_tx_timestamp. Adjusted txstamp API to keep the allocation and freeing of the clone in the same central function by Richard Cochran Signed-off-by: Brandon Streiff <brandon.streiff@ni.com> Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-14 00:07:49 +00:00
struct sk_buff *skb)
{
struct dsa_switch *ds = p->dp->ds;
net: dsa: check tx timestamp request in core driver Check tx timestamp request in core driver at very beginning of dsa_skb_tx_timestamp(), so that most skbs not requiring tx timestamp just return. And drop such checking in device drivers. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-27 04:21:57 +00:00
if (!(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP))
return;
net: dsa: forward timestamping callbacks to switch drivers Forward the rx/tx timestamp machinery from the dsa infrastructure to the switch driver. On the rx side, defer delivery of skbs until we have an rx timestamp. This mimicks the behavior of skb_defer_rx_timestamp. On the tx side, identify PTP packets, clone them, and pass them to the underlying switch driver before we transmit. This mimicks the behavior of skb_tx_timestamp. Adjusted txstamp API to keep the allocation and freeing of the clone in the same central function by Richard Cochran Signed-off-by: Brandon Streiff <brandon.streiff@ni.com> Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-14 00:07:49 +00:00
if (!ds->ops->port_txtstamp)
return;
net: dsa: no longer clone skb in core driver It was a waste to clone skb directly in dsa_skb_tx_timestamp(). For one-step timestamping, a clone was not needed. For any failure of port_txtstamp (this may usually happen), the skb clone had to be freed. So this patch moves skb cloning for tx timestamp out of dsa core, and let drivers clone skb in port_txtstamp if they really need. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Kurt Kanzenbach <kurt@linutronix.de> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-27 04:21:59 +00:00
ds->ops->port_txtstamp(ds, p->dp->index, skb);
net: dsa: forward timestamping callbacks to switch drivers Forward the rx/tx timestamp machinery from the dsa infrastructure to the switch driver. On the rx side, defer delivery of skbs until we have an rx timestamp. This mimicks the behavior of skb_defer_rx_timestamp. On the tx side, identify PTP packets, clone them, and pass them to the underlying switch driver before we transmit. This mimicks the behavior of skb_tx_timestamp. Adjusted txstamp API to keep the allocation and freeing of the clone in the same central function by Richard Cochran Signed-off-by: Brandon Streiff <brandon.streiff@ni.com> Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-14 00:07:49 +00:00
}
net: dsa: Add support for deferred xmit Some hardware needs to take work to get convinced to receive frames on the CPU port (such as the sja1105 which takes temporary L2 forwarding rules over SPI that last for a single frame). Such work needs a sleepable context, and because the regular .ndo_start_xmit is atomic, this cannot be done in the tagger. So introduce a generic DSA mechanism that sets up a transmit skb queue and a workqueue for deferred transmission. The new driver callback (.port_deferred_xmit) is in dsa_switch and not in the tagger because the operations that require sleeping typically also involve interacting with the hardware, and not simply skb manipulations. Therefore having it there simplifies the structure a bit and makes it unnecessary to export functions from the driver to the tagger. The driver is responsible of calling dsa_enqueue_skb which transfers it to the master netdevice. This is so that it has a chance of performing some more work afterwards, such as cleanup or TX timestamping. To tell DSA that skb xmit deferral is required, I have thought about changing the return type of the tagger .xmit from struct sk_buff * into a enum dsa_tx_t that could potentially encode a DSA_XMIT_DEFER value. But the trailer tagger is reallocating every skb on xmit and therefore making a valid use of the pointer return value. So instead of reworking the API in complicated ways, right now a boolean property in the newly introduced DSA_SKB_CB is set. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05 10:19:25 +00:00
netdev_tx_t dsa_enqueue_skb(struct sk_buff *skb, struct net_device *dev)
{
/* SKB for netpoll still need to be mangled with the protocol-specific
* tag to be successfully transmitted
*/
if (unlikely(netpoll_tx_running(dev)))
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
return dsa_user_netpoll_send_skb(dev, skb);
net: dsa: Add support for deferred xmit Some hardware needs to take work to get convinced to receive frames on the CPU port (such as the sja1105 which takes temporary L2 forwarding rules over SPI that last for a single frame). Such work needs a sleepable context, and because the regular .ndo_start_xmit is atomic, this cannot be done in the tagger. So introduce a generic DSA mechanism that sets up a transmit skb queue and a workqueue for deferred transmission. The new driver callback (.port_deferred_xmit) is in dsa_switch and not in the tagger because the operations that require sleeping typically also involve interacting with the hardware, and not simply skb manipulations. Therefore having it there simplifies the structure a bit and makes it unnecessary to export functions from the driver to the tagger. The driver is responsible of calling dsa_enqueue_skb which transfers it to the master netdevice. This is so that it has a chance of performing some more work afterwards, such as cleanup or TX timestamping. To tell DSA that skb xmit deferral is required, I have thought about changing the return type of the tagger .xmit from struct sk_buff * into a enum dsa_tx_t that could potentially encode a DSA_XMIT_DEFER value. But the trailer tagger is reallocating every skb on xmit and therefore making a valid use of the pointer return value. So instead of reworking the API in complicated ways, right now a boolean property in the newly introduced DSA_SKB_CB is set. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05 10:19:25 +00:00
/* Queue the SKB for transmission on the parent interface, but
* do not modify its EtherType
*/
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
skb->dev = dsa_user_to_conduit(dev);
net: dsa: Add support for deferred xmit Some hardware needs to take work to get convinced to receive frames on the CPU port (such as the sja1105 which takes temporary L2 forwarding rules over SPI that last for a single frame). Such work needs a sleepable context, and because the regular .ndo_start_xmit is atomic, this cannot be done in the tagger. So introduce a generic DSA mechanism that sets up a transmit skb queue and a workqueue for deferred transmission. The new driver callback (.port_deferred_xmit) is in dsa_switch and not in the tagger because the operations that require sleeping typically also involve interacting with the hardware, and not simply skb manipulations. Therefore having it there simplifies the structure a bit and makes it unnecessary to export functions from the driver to the tagger. The driver is responsible of calling dsa_enqueue_skb which transfers it to the master netdevice. This is so that it has a chance of performing some more work afterwards, such as cleanup or TX timestamping. To tell DSA that skb xmit deferral is required, I have thought about changing the return type of the tagger .xmit from struct sk_buff * into a enum dsa_tx_t that could potentially encode a DSA_XMIT_DEFER value. But the trailer tagger is reallocating every skb on xmit and therefore making a valid use of the pointer return value. So instead of reworking the API in complicated ways, right now a boolean property in the newly introduced DSA_SKB_CB is set. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05 10:19:25 +00:00
dev_queue_xmit(skb);
return NETDEV_TX_OK;
}
EXPORT_SYMBOL_GPL(dsa_enqueue_skb);
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static netdev_tx_t dsa_user_xmit(struct sk_buff *skb, struct net_device *dev)
net: dsa: reduce number of protocol hooks DSA is currently registering one packet_type function per EtherType it needs to intercept in the receive path of a DSA-enabled Ethernet device. Right now we have three of them: trailer, DSA and eDSA, and there might be more in the future, this will not scale to the addition of new protocols. This patch proceeds with adding a new layer of abstraction and two new functions: dsa_switch_rcv() which will dispatch into the tag-protocol specific receive function implemented by net/dsa/tag_*.c dsa_slave_xmit() which will dispatch into the tag-protocol specific transmit function implemented by net/dsa/tag_*.c When we do create the per-port slave network devices, we iterate over the switch protocol to assign the DSA-specific receive and transmit operations. A new fake ethertype value is used: ETH_P_XDSA to illustrate the fact that this is no longer going to look like ETH_P_DSA or ETH_P_TRAILER like it used to be. This allows us to greatly simplify the check in eth_type_trans() and always override the skb->protocol with ETH_P_XDSA for Ethernet switches tagged protocol, while also reducing the number repetitive slave netdevice_ops assignments. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-28 00:04:46 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_user_priv *p = netdev_priv(dev);
net: dsa: Refactor transmit path to eliminate duplication All tagging protocols do the same thing: increment device statistics, make room for the tag to be inserted, create the tag, invoke the parent network device transmit function. In order to prepare for adding netpoll support, which requires the tag creation, but not using the parent network device transmit function, do some little refactoring which eliminates duplication between the 4 tagging protocols supported. We need to return a sk_buff pointer back to the caller because the tag specific transmit function may have to reallocate the original skb (e.g: tag_trailer.c) and this is the one we should be transmitting, not the original sk_buff we were passed. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-31 18:42:56 +00:00
struct sk_buff *nskb;
net: dsa: reduce number of protocol hooks DSA is currently registering one packet_type function per EtherType it needs to intercept in the receive path of a DSA-enabled Ethernet device. Right now we have three of them: trailer, DSA and eDSA, and there might be more in the future, this will not scale to the addition of new protocols. This patch proceeds with adding a new layer of abstraction and two new functions: dsa_switch_rcv() which will dispatch into the tag-protocol specific receive function implemented by net/dsa/tag_*.c dsa_slave_xmit() which will dispatch into the tag-protocol specific transmit function implemented by net/dsa/tag_*.c When we do create the per-port slave network devices, we iterate over the switch protocol to assign the DSA-specific receive and transmit operations. A new fake ethertype value is used: ETH_P_XDSA to illustrate the fact that this is no longer going to look like ETH_P_DSA or ETH_P_TRAILER like it used to be. This allows us to greatly simplify the check in eth_type_trans() and always override the skb->protocol with ETH_P_XDSA for Ethernet switches tagged protocol, while also reducing the number repetitive slave netdevice_ops assignments. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-28 00:04:46 +00:00
net: dsa: use net core stats64 handling Use netdev->tstats instead of a member of dsa_slave_priv for storing a pointer to the per-cpu counters. This allows us to use core functionality for statistics handling. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-07 20:49:46 +00:00
dev_sw_netstats_tx_add(dev, 1, skb->len);
net: dsa: reduce number of protocol hooks DSA is currently registering one packet_type function per EtherType it needs to intercept in the receive path of a DSA-enabled Ethernet device. Right now we have three of them: trailer, DSA and eDSA, and there might be more in the future, this will not scale to the addition of new protocols. This patch proceeds with adding a new layer of abstraction and two new functions: dsa_switch_rcv() which will dispatch into the tag-protocol specific receive function implemented by net/dsa/tag_*.c dsa_slave_xmit() which will dispatch into the tag-protocol specific transmit function implemented by net/dsa/tag_*.c When we do create the per-port slave network devices, we iterate over the switch protocol to assign the DSA-specific receive and transmit operations. A new fake ethertype value is used: ETH_P_XDSA to illustrate the fact that this is no longer going to look like ETH_P_DSA or ETH_P_TRAILER like it used to be. This allows us to greatly simplify the check in eth_type_trans() and always override the skb->protocol with ETH_P_XDSA for Ethernet switches tagged protocol, while also reducing the number repetitive slave netdevice_ops assignments. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-28 00:04:46 +00:00
net: dsa: free skb->cb usage in core driver Free skb->cb usage in core driver and let device drivers decide to use or not. The reason having a DSA_SKB_CB(skb)->clone was because dsa_skb_tx_timestamp() which may set the clone pointer was called before p->xmit() which would use the clone if any, and the device driver has no way to initialize the clone pointer. This patch just put memset(skb->cb, 0, sizeof(skb->cb)) at beginning of dsa_slave_xmit(). Some new features in the future, like one-step timestamp may need more bytes of skb->cb to use in dsa_skb_tx_timestamp(), and p->xmit(). Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-27 04:22:00 +00:00
memset(skb->cb, 0, sizeof(skb->cb));
net: dsa: Initialize DSA_SKB_CB(skb)->deferred_xmit variable The sk_buff control block can have any contents on xmit put there by the stack, so initialization is mandatory, since we are checking its value after the actual DSA xmit (the tagger may have changed it). The DSA_SKB_ZERO() macro could have been used for this purpose, but: - Zeroizing a 48-byte memory region in the hotpath is best avoided. - It would have triggered a warning with newer compilers since __dsa_skb_cb contains a structure within a structure, and the {0} initializer was incorrect for that purpose. So simply remove the DSA_SKB_ZERO() macro and initialize the deferred_xmit variable by hand (which should be done for all further dsa_skb_cb variables which need initialization - currently none - to avoid the performance penalty). Fixes: 97a69a0dea9a ("net: dsa: Add support for deferred xmit") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-11 20:14:45 +00:00
net: dsa: no longer identify PTP packet in core driver Move ptp_classify_raw out of dsa core driver for handling tx timestamp request. Let device drivers do this if they want. Not all drivers want to limit tx timestamping for only PTP packet. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Kurt Kanzenbach <kurt@linutronix.de> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-27 04:21:58 +00:00
/* Handle tx timestamp if any */
net: dsa: forward timestamping callbacks to switch drivers Forward the rx/tx timestamp machinery from the dsa infrastructure to the switch driver. On the rx side, defer delivery of skbs until we have an rx timestamp. This mimicks the behavior of skb_defer_rx_timestamp. On the tx side, identify PTP packets, clone them, and pass them to the underlying switch driver before we transmit. This mimicks the behavior of skb_tx_timestamp. Adjusted txstamp API to keep the allocation and freeing of the clone in the same central function by Richard Cochran Signed-off-by: Brandon Streiff <brandon.streiff@ni.com> Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-14 00:07:49 +00:00
dsa_skb_tx_timestamp(p, skb);
net: rename dsa_realloc_skb to skb_ensure_writable_head_tail Rename dsa_realloc_skb to skb_ensure_writable_head_tail and move it to skbuff.c to use it as helper. Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-19 14:53:25 +00:00
if (skb_ensure_writable_head_tail(skb, dev)) {
net: dsa: implement a central TX reallocation procedure At the moment, taggers are left with the task of ensuring that the skb headers are writable (which they aren't, if the frames were cloned for TX timestamping, for flooding by the bridge, etc), and that there is enough space in the skb data area for the DSA tag to be pushed. Moreover, the life of tail taggers is even harder, because they need to ensure that short frames have enough padding, a problem that normal taggers don't have. The principle of the DSA framework is that everything except for the most intimate hardware specifics (like in this case, the actual packing of the DSA tag bits) should be done inside the core, to avoid having code paths that are very rarely tested. So provide a TX reallocation procedure that should cover the known needs of DSA today. Note that this patch also gives the network stack a good hint about the headroom/tailroom it's going to need. Up till now it wasn't doing that. So the reallocation procedure should really be there only for the exceptional cases, and for cloned packets which need to be unshared. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Christian Eggers <ceggers@arri.de> # For tail taggers only Tested-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-01 19:16:09 +00:00
dev_kfree_skb_any(skb);
return NETDEV_TX_OK;
}
/* needed_tailroom should still be 'warm' in the cache line from
net: rename dsa_realloc_skb to skb_ensure_writable_head_tail Rename dsa_realloc_skb to skb_ensure_writable_head_tail and move it to skbuff.c to use it as helper. Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-19 14:53:25 +00:00
* skb_ensure_writable_head_tail(), which has also ensured that
* padding is safe.
net: dsa: implement a central TX reallocation procedure At the moment, taggers are left with the task of ensuring that the skb headers are writable (which they aren't, if the frames were cloned for TX timestamping, for flooding by the bridge, etc), and that there is enough space in the skb data area for the DSA tag to be pushed. Moreover, the life of tail taggers is even harder, because they need to ensure that short frames have enough padding, a problem that normal taggers don't have. The principle of the DSA framework is that everything except for the most intimate hardware specifics (like in this case, the actual packing of the DSA tag bits) should be done inside the core, to avoid having code paths that are very rarely tested. So provide a TX reallocation procedure that should cover the known needs of DSA today. Note that this patch also gives the network stack a good hint about the headroom/tailroom it's going to need. Up till now it wasn't doing that. So the reallocation procedure should really be there only for the exceptional cases, and for cloned packets which need to be unshared. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Christian Eggers <ceggers@arri.de> # For tail taggers only Tested-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-01 19:16:09 +00:00
*/
if (dev->needed_tailroom)
eth_skb_pad(skb);
net: dsa: factor skb freeing on xmit As of a86d8becc3f0 ("net: dsa: Factor bottom tag receive functions"), the rcv caller frees the original SKB in case or error. Be symmetric with that and make the xmit caller do the same. At the same time, fix the checkpatch NULL comparison check: CHECK: Comparison to NULL could be written "!nskb" #208: FILE: net/dsa/tag_trailer.c:35: + if (nskb == NULL) Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-01 20:07:15 +00:00
/* Transmit function may have to reallocate the original SKB,
* in which case it must have freed it. Only free it here on error.
*/
net: dsa: Refactor transmit path to eliminate duplication All tagging protocols do the same thing: increment device statistics, make room for the tag to be inserted, create the tag, invoke the parent network device transmit function. In order to prepare for adding netpoll support, which requires the tag creation, but not using the parent network device transmit function, do some little refactoring which eliminates duplication between the 4 tagging protocols supported. We need to return a sk_buff pointer back to the caller because the tag specific transmit function may have to reallocate the original skb (e.g: tag_trailer.c) and this is the one we should be transmitting, not the original sk_buff we were passed. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-31 18:42:56 +00:00
nskb = p->xmit(skb, dev);
net: dsa: factor skb freeing on xmit As of a86d8becc3f0 ("net: dsa: Factor bottom tag receive functions"), the rcv caller frees the original SKB in case or error. Be symmetric with that and make the xmit caller do the same. At the same time, fix the checkpatch NULL comparison check: CHECK: Comparison to NULL could be written "!nskb" #208: FILE: net/dsa/tag_trailer.c:35: + if (nskb == NULL) Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-01 20:07:15 +00:00
if (!nskb) {
net: dsa: Make deferred_xmit private to sja1105 There are 3 things that are wrong with the DSA deferred xmit mechanism: 1. Its introduction has made the DSA hotpath ever so slightly more inefficient for everybody, since DSA_SKB_CB(skb)->deferred_xmit needs to be initialized to false for every transmitted frame, in order to figure out whether the driver requested deferral or not (a very rare occasion, rare even for the only driver that does use this mechanism: sja1105). That was necessary to avoid kfree_skb from freeing the skb. 2. Because L2 PTP is a link-local protocol like STP, it requires management routes and deferred xmit with this switch. But as opposed to STP, the deferred work mechanism needs to schedule the packet rather quickly for the TX timstamp to be collected in time and sent to user space. But there is no provision for controlling the scheduling priority of this deferred xmit workqueue. Too bad this is a rather specific requirement for a feature that nobody else uses (more below). 3. Perhaps most importantly, it makes the DSA core adhere a bit too much to the NXP company-wide policy "Innovate Where It Doesn't Matter". The sja1105 is probably the only DSA switch that requires some frames sent from the CPU to be routed to the slave port via an out-of-band configuration (register write) rather than in-band (DSA tag). And there are indeed very good reasons to not want to do that: if that out-of-band register is at the other end of a slow bus such as SPI, then you limit that Ethernet flow's throughput to effectively the throughput of the SPI bus. So hardware vendors should definitely not be encouraged to design this way. We do _not_ want more widespread use of this mechanism. Luckily we have a solution for each of the 3 issues: For 1, we can just remove that variable in the skb->cb and counteract the effect of kfree_skb with skb_get, much to the same effect. The advantage, of course, being that anybody who doesn't use deferred xmit doesn't need to do any extra operation in the hotpath. For 2, we can create a kernel thread for each port's deferred xmit work. If the user switch ports are named swp0, swp1, swp2, the kernel threads will be named swp0_xmit, swp1_xmit, swp2_xmit (there appears to be a 15 character length limit on kernel thread names). With this, the user can change the scheduling priority with chrt $(pidof swp2_xmit). For 3, we can actually move the entire implementation to the sja1105 driver. So this patch deletes the generic implementation from the DSA core and adds a new one, more adequate to the requirements of PTP TX timestamping, in sja1105_main.c. Suggested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-04 00:37:10 +00:00
kfree_skb(skb);
net: dsa: Refactor transmit path to eliminate duplication All tagging protocols do the same thing: increment device statistics, make room for the tag to be inserted, create the tag, invoke the parent network device transmit function. In order to prepare for adding netpoll support, which requires the tag creation, but not using the parent network device transmit function, do some little refactoring which eliminates duplication between the 4 tagging protocols supported. We need to return a sk_buff pointer back to the caller because the tag specific transmit function may have to reallocate the original skb (e.g: tag_trailer.c) and this is the one we should be transmitting, not the original sk_buff we were passed. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-31 18:42:56 +00:00
return NETDEV_TX_OK;
net: dsa: factor skb freeing on xmit As of a86d8becc3f0 ("net: dsa: Factor bottom tag receive functions"), the rcv caller frees the original SKB in case or error. Be symmetric with that and make the xmit caller do the same. At the same time, fix the checkpatch NULL comparison check: CHECK: Comparison to NULL could be written "!nskb" #208: FILE: net/dsa/tag_trailer.c:35: + if (nskb == NULL) Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-01 20:07:15 +00:00
}
net: dsa: allow switches to work without tagging In case switch port tagging is disabled (voluntarily, or the switch just does not support it), allow us to continue using the defined set of dsa_device_ops in net/dsa/slave.c. We introduce dsa_protocol_is_tagged() to check whether we need to override skb->protocol and go through the DSA-specifif packet_type function, or if we just go on and receive the SKB through the normal path. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-28 00:04:52 +00:00
net: dsa: Add support for deferred xmit Some hardware needs to take work to get convinced to receive frames on the CPU port (such as the sja1105 which takes temporary L2 forwarding rules over SPI that last for a single frame). Such work needs a sleepable context, and because the regular .ndo_start_xmit is atomic, this cannot be done in the tagger. So introduce a generic DSA mechanism that sets up a transmit skb queue and a workqueue for deferred transmission. The new driver callback (.port_deferred_xmit) is in dsa_switch and not in the tagger because the operations that require sleeping typically also involve interacting with the hardware, and not simply skb manipulations. Therefore having it there simplifies the structure a bit and makes it unnecessary to export functions from the driver to the tagger. The driver is responsible of calling dsa_enqueue_skb which transfers it to the master netdevice. This is so that it has a chance of performing some more work afterwards, such as cleanup or TX timestamping. To tell DSA that skb xmit deferral is required, I have thought about changing the return type of the tagger .xmit from struct sk_buff * into a enum dsa_tx_t that could potentially encode a DSA_XMIT_DEFER value. But the trailer tagger is reallocating every skb on xmit and therefore making a valid use of the pointer return value. So instead of reworking the API in complicated ways, right now a boolean property in the newly introduced DSA_SKB_CB is set. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05 10:19:25 +00:00
return dsa_enqueue_skb(nskb, dev);
}
net: dsa: Add netconsole support Add support for using DSA slave network devices with netconsole, which requires us to allocate and free custom netpoll instances and invoke the parent network device poll controller callback. In order for netconsole to work, we need to construct the DSA tag, but not queue the skb for transmission on the master network device xmit function. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-31 18:42:57 +00:00
net: Distributed Switch Architecture protocol support Distributed Switch Architecture is a protocol for managing hardware switch chips. It consists of a set of MII management registers and commands to configure the switch, and an ethernet header format to signal which of the ports of the switch a packet was received from or is intended to be sent to. The switches that this driver supports are typically embedded in access points and routers, and a typical setup with a DSA switch looks something like this: +-----------+ +-----------+ | | RGMII | | | +-------+ +------ 1000baseT MDI ("WAN") | | | 6-port +------ 1000baseT MDI ("LAN1") | CPU | | ethernet +------ 1000baseT MDI ("LAN2") | |MIImgmt| switch +------ 1000baseT MDI ("LAN3") | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4") | | | | +-----------+ +-----------+ The switch driver presents each port on the switch as a separate network interface to Linux, polls the switch to maintain software link state of those ports, forwards MII management interface accesses to those network interfaces (e.g. as done by ethtool) to the switch, and exposes the switch's hardware statistics counters via the appropriate Linux kernel interfaces. This initial patch supports the MII management interface register layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and supports the "Ethertype DSA" packet tagging format. (There is no officially registered ethertype for the Ethertype DSA packet format, so we just grab a random one. The ethertype to use is programmed into the switch, and the switch driver uses the value of ETH_P_EDSA for this, so this define can be changed at any time in the future if the one we chose is allocated to another protocol or if Ethertype DSA gets its own officially registered ethertype, and everything will continue to work.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 13:44:02 +00:00
/* ethtool operations *******************************************************/
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static void dsa_user_get_drvinfo(struct net_device *dev,
struct ethtool_drvinfo *drvinfo)
net: Distributed Switch Architecture protocol support Distributed Switch Architecture is a protocol for managing hardware switch chips. It consists of a set of MII management registers and commands to configure the switch, and an ethernet header format to signal which of the ports of the switch a packet was received from or is intended to be sent to. The switches that this driver supports are typically embedded in access points and routers, and a typical setup with a DSA switch looks something like this: +-----------+ +-----------+ | | RGMII | | | +-------+ +------ 1000baseT MDI ("WAN") | | | 6-port +------ 1000baseT MDI ("LAN1") | CPU | | ethernet +------ 1000baseT MDI ("LAN2") | |MIImgmt| switch +------ 1000baseT MDI ("LAN3") | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4") | | | | +-----------+ +-----------+ The switch driver presents each port on the switch as a separate network interface to Linux, polls the switch to maintain software link state of those ports, forwards MII management interface accesses to those network interfaces (e.g. as done by ethtool) to the switch, and exposes the switch's hardware statistics counters via the appropriate Linux kernel interfaces. This initial patch supports the MII management interface register layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and supports the "Ethertype DSA" packet tagging format. (There is no officially registered ethertype for the Ethertype DSA packet format, so we just grab a random one. The ethertype to use is programmed into the switch, and the switch driver uses the value of ETH_P_EDSA for this, so this define can be changed at any time in the future if the one we chose is allocated to another protocol or if Ethertype DSA gets its own officially registered ethertype, and everything will continue to work.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 13:44:02 +00:00
{
dsa: move from strlcpy with unused retval to strscpy Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220818210216.8419-1-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-18 21:02:16 +00:00
strscpy(drvinfo->driver, "dsa", sizeof(drvinfo->driver));
strscpy(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version));
strscpy(drvinfo->bus_info, "platform", sizeof(drvinfo->bus_info));
net: Distributed Switch Architecture protocol support Distributed Switch Architecture is a protocol for managing hardware switch chips. It consists of a set of MII management registers and commands to configure the switch, and an ethernet header format to signal which of the ports of the switch a packet was received from or is intended to be sent to. The switches that this driver supports are typically embedded in access points and routers, and a typical setup with a DSA switch looks something like this: +-----------+ +-----------+ | | RGMII | | | +-------+ +------ 1000baseT MDI ("WAN") | | | 6-port +------ 1000baseT MDI ("LAN1") | CPU | | ethernet +------ 1000baseT MDI ("LAN2") | |MIImgmt| switch +------ 1000baseT MDI ("LAN3") | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4") | | | | +-----------+ +-----------+ The switch driver presents each port on the switch as a separate network interface to Linux, polls the switch to maintain software link state of those ports, forwards MII management interface accesses to those network interfaces (e.g. as done by ethtool) to the switch, and exposes the switch's hardware statistics counters via the appropriate Linux kernel interfaces. This initial patch supports the MII management interface register layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and supports the "Ethertype DSA" packet tagging format. (There is no officially registered ethertype for the Ethertype DSA packet format, so we just grab a random one. The ethertype to use is programmed into the switch, and the switch driver uses the value of ETH_P_EDSA for this, so this define can be changed at any time in the future if the one we chose is allocated to another protocol or if Ethertype DSA gets its own officially registered ethertype, and everything will continue to work.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 13:44:02 +00:00
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_get_regs_len(struct net_device *dev)
net: dsa: Add support for reading switch registers with ethtool Add support for reading switch registers with 'ethtool -d'. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-29 17:45:04 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: add slave to port helper Many portions of DSA core code require to get the dsa_port structure corresponding to a slave net_device. For this purpose, introduce a dsa_slave_to_port() helper. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 15:12:15 +00:00
struct dsa_switch *ds = dp->ds;
net: dsa: Add support for reading switch registers with ethtool Add support for reading switch registers with 'ethtool -d'. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-29 17:45:04 +00:00
net: dsa: rename switch operations structure Now that the dsa_switch_driver structure contains only function pointers as it is supposed to, rename it to the more appropriate dsa_switch_ops, uniformly to any other operations structure in the kernel. No functional changes here, basically just the result of something like: s/dsa_switch_driver *drv/dsa_switch_ops *ops/g However keep the {un,}register_switch_driver functions and their dsa_switch_drivers list as is, since they represent the -- likely to be deprecated soon -- legacy DSA registration framework. In the meantime, also fix the following checks from checkpatch.pl to make it happy with this patch: CHECK: Comparison to NULL could be written "!ops" #403: FILE: net/dsa/dsa.c:470: + if (ops == NULL) { CHECK: Comparison to NULL could be written "ds->ops->get_strings" #773: FILE: net/dsa/slave.c:697: + if (ds->ops->get_strings != NULL) CHECK: Comparison to NULL could be written "ds->ops->get_ethtool_stats" #824: FILE: net/dsa/slave.c:785: + if (ds->ops->get_ethtool_stats != NULL) CHECK: Comparison to NULL could be written "ds->ops->get_sset_count" #835: FILE: net/dsa/slave.c:798: + if (ds->ops->get_sset_count != NULL) total: 0 errors, 0 warnings, 4 checks, 784 lines checked Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23 16:38:56 +00:00
if (ds->ops->get_regs_len)
net: dsa: add slave to port helper Many portions of DSA core code require to get the dsa_port structure corresponding to a slave net_device. For this purpose, introduce a dsa_slave_to_port() helper. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 15:12:15 +00:00
return ds->ops->get_regs_len(ds, dp->index);
net: dsa: Add support for reading switch registers with ethtool Add support for reading switch registers with 'ethtool -d'. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-29 17:45:04 +00:00
return -EOPNOTSUPP;
}
static void
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dsa_user_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *_p)
net: dsa: Add support for reading switch registers with ethtool Add support for reading switch registers with 'ethtool -d'. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-29 17:45:04 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: add slave to port helper Many portions of DSA core code require to get the dsa_port structure corresponding to a slave net_device. For this purpose, introduce a dsa_slave_to_port() helper. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 15:12:15 +00:00
struct dsa_switch *ds = dp->ds;
net: dsa: Add support for reading switch registers with ethtool Add support for reading switch registers with 'ethtool -d'. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-29 17:45:04 +00:00
net: dsa: rename switch operations structure Now that the dsa_switch_driver structure contains only function pointers as it is supposed to, rename it to the more appropriate dsa_switch_ops, uniformly to any other operations structure in the kernel. No functional changes here, basically just the result of something like: s/dsa_switch_driver *drv/dsa_switch_ops *ops/g However keep the {un,}register_switch_driver functions and their dsa_switch_drivers list as is, since they represent the -- likely to be deprecated soon -- legacy DSA registration framework. In the meantime, also fix the following checks from checkpatch.pl to make it happy with this patch: CHECK: Comparison to NULL could be written "!ops" #403: FILE: net/dsa/dsa.c:470: + if (ops == NULL) { CHECK: Comparison to NULL could be written "ds->ops->get_strings" #773: FILE: net/dsa/slave.c:697: + if (ds->ops->get_strings != NULL) CHECK: Comparison to NULL could be written "ds->ops->get_ethtool_stats" #824: FILE: net/dsa/slave.c:785: + if (ds->ops->get_ethtool_stats != NULL) CHECK: Comparison to NULL could be written "ds->ops->get_sset_count" #835: FILE: net/dsa/slave.c:798: + if (ds->ops->get_sset_count != NULL) total: 0 errors, 0 warnings, 4 checks, 784 lines checked Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23 16:38:56 +00:00
if (ds->ops->get_regs)
net: dsa: add slave to port helper Many portions of DSA core code require to get the dsa_port structure corresponding to a slave net_device. For this purpose, introduce a dsa_slave_to_port() helper. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 15:12:15 +00:00
ds->ops->get_regs(ds, dp->index, regs, _p);
net: dsa: Add support for reading switch registers with ethtool Add support for reading switch registers with 'ethtool -d'. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-29 17:45:04 +00:00
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_nway_reset(struct net_device *dev)
net: dsa: Plug in PHYLINK support Add support for PHYLINK within the DSA subsystem in order to support more complex devices such as pluggable (SFP) and non-pluggable (SFF) modules, 10G PHYs, and traditional PHYs. Using PHYLINK allows us to drop some amount of complexity we had while probing fixed and non-fixed PHYs using Device Tree. Because PHYLINK separates the Ethernet MAC/port configuration into different stages, we let switch drivers implement those, and for now, we maintain functionality by calling dsa_slave_adjust_link() during phylink_mac_link_{up,down} which provides semantically equivalent steps. Drivers willing to take advantage of PHYLINK should implement the phylink_mac_* operations that DSA wraps. We cannot quite remove the adjust_link() callback just yet, because a number of drivers rely on that for configuring their "CPU" and "DSA" ports, this is done dsa_port_setup_phy_of() and dsa_port_fixed_link_register_of() still. Drivers that utilize fixed links for user-facing ports (e.g: bcm_sf2) will need to implement phylink_mac_ops from now on to preserve functionality, since PHYLINK *does not* create a phy_device instance for fixed links. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 20:17:36 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: Plug in PHYLINK support Add support for PHYLINK within the DSA subsystem in order to support more complex devices such as pluggable (SFP) and non-pluggable (SFF) modules, 10G PHYs, and traditional PHYs. Using PHYLINK allows us to drop some amount of complexity we had while probing fixed and non-fixed PHYs using Device Tree. Because PHYLINK separates the Ethernet MAC/port configuration into different stages, we let switch drivers implement those, and for now, we maintain functionality by calling dsa_slave_adjust_link() during phylink_mac_link_{up,down} which provides semantically equivalent steps. Drivers willing to take advantage of PHYLINK should implement the phylink_mac_* operations that DSA wraps. We cannot quite remove the adjust_link() callback just yet, because a number of drivers rely on that for configuring their "CPU" and "DSA" ports, this is done dsa_port_setup_phy_of() and dsa_port_fixed_link_register_of() still. Drivers that utilize fixed links for user-facing ports (e.g: bcm_sf2) will need to implement phylink_mac_ops from now on to preserve functionality, since PHYLINK *does not* create a phy_device instance for fixed links. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 20:17:36 +00:00
return phylink_ethtool_nway_reset(dp->pl);
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_get_eeprom_len(struct net_device *dev)
net: dsa: Add support for switch EEPROM access On some chips it is possible to access the switch eeprom. Add infrastructure support for it. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-29 17:45:01 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: add slave to port helper Many portions of DSA core code require to get the dsa_port structure corresponding to a slave net_device. For this purpose, introduce a dsa_slave_to_port() helper. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 15:12:15 +00:00
struct dsa_switch *ds = dp->ds;
net: dsa: Add support for switch EEPROM access On some chips it is possible to access the switch eeprom. Add infrastructure support for it. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-29 17:45:01 +00:00
net: dsa: slave: chip data is optional, don't dereference NULL The new binding does not make use of dsa_chip_data, a.k.a cd. When retrieving the size of the EEPROM attached to a switch, don't assume there is a cd attached to the switch structure. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-04 19:16:52 +00:00
if (ds->cd && ds->cd->eeprom_len)
dsa: Rename switch chip data to cd The dsa_switch structure contains a dsa_chip_data member called pd. However in the rest of the code, pd is used for dsa_platform_data. This is confusing. Rename it cd, which is already often used in dsa.c and slave.c for this data type. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-10 21:27:24 +00:00
return ds->cd->eeprom_len;
net: dsa: Add support for switch EEPROM access On some chips it is possible to access the switch eeprom. Add infrastructure support for it. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-29 17:45:01 +00:00
net: dsa: rename switch operations structure Now that the dsa_switch_driver structure contains only function pointers as it is supposed to, rename it to the more appropriate dsa_switch_ops, uniformly to any other operations structure in the kernel. No functional changes here, basically just the result of something like: s/dsa_switch_driver *drv/dsa_switch_ops *ops/g However keep the {un,}register_switch_driver functions and their dsa_switch_drivers list as is, since they represent the -- likely to be deprecated soon -- legacy DSA registration framework. In the meantime, also fix the following checks from checkpatch.pl to make it happy with this patch: CHECK: Comparison to NULL could be written "!ops" #403: FILE: net/dsa/dsa.c:470: + if (ops == NULL) { CHECK: Comparison to NULL could be written "ds->ops->get_strings" #773: FILE: net/dsa/slave.c:697: + if (ds->ops->get_strings != NULL) CHECK: Comparison to NULL could be written "ds->ops->get_ethtool_stats" #824: FILE: net/dsa/slave.c:785: + if (ds->ops->get_ethtool_stats != NULL) CHECK: Comparison to NULL could be written "ds->ops->get_sset_count" #835: FILE: net/dsa/slave.c:798: + if (ds->ops->get_sset_count != NULL) total: 0 errors, 0 warnings, 4 checks, 784 lines checked Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23 16:38:56 +00:00
if (ds->ops->get_eeprom_len)
return ds->ops->get_eeprom_len(ds);
net: dsa: Add support for switch EEPROM access On some chips it is possible to access the switch eeprom. Add infrastructure support for it. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-29 17:45:01 +00:00
return 0;
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_get_eeprom(struct net_device *dev,
struct ethtool_eeprom *eeprom, u8 *data)
net: dsa: Add support for switch EEPROM access On some chips it is possible to access the switch eeprom. Add infrastructure support for it. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-29 17:45:01 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: add slave to port helper Many portions of DSA core code require to get the dsa_port structure corresponding to a slave net_device. For this purpose, introduce a dsa_slave_to_port() helper. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 15:12:15 +00:00
struct dsa_switch *ds = dp->ds;
net: dsa: Add support for switch EEPROM access On some chips it is possible to access the switch eeprom. Add infrastructure support for it. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-29 17:45:01 +00:00
net: dsa: rename switch operations structure Now that the dsa_switch_driver structure contains only function pointers as it is supposed to, rename it to the more appropriate dsa_switch_ops, uniformly to any other operations structure in the kernel. No functional changes here, basically just the result of something like: s/dsa_switch_driver *drv/dsa_switch_ops *ops/g However keep the {un,}register_switch_driver functions and their dsa_switch_drivers list as is, since they represent the -- likely to be deprecated soon -- legacy DSA registration framework. In the meantime, also fix the following checks from checkpatch.pl to make it happy with this patch: CHECK: Comparison to NULL could be written "!ops" #403: FILE: net/dsa/dsa.c:470: + if (ops == NULL) { CHECK: Comparison to NULL could be written "ds->ops->get_strings" #773: FILE: net/dsa/slave.c:697: + if (ds->ops->get_strings != NULL) CHECK: Comparison to NULL could be written "ds->ops->get_ethtool_stats" #824: FILE: net/dsa/slave.c:785: + if (ds->ops->get_ethtool_stats != NULL) CHECK: Comparison to NULL could be written "ds->ops->get_sset_count" #835: FILE: net/dsa/slave.c:798: + if (ds->ops->get_sset_count != NULL) total: 0 errors, 0 warnings, 4 checks, 784 lines checked Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23 16:38:56 +00:00
if (ds->ops->get_eeprom)
return ds->ops->get_eeprom(ds, eeprom, data);
net: dsa: Add support for switch EEPROM access On some chips it is possible to access the switch eeprom. Add infrastructure support for it. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-29 17:45:01 +00:00
return -EOPNOTSUPP;
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_set_eeprom(struct net_device *dev,
struct ethtool_eeprom *eeprom, u8 *data)
net: dsa: Add support for switch EEPROM access On some chips it is possible to access the switch eeprom. Add infrastructure support for it. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-29 17:45:01 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: add slave to port helper Many portions of DSA core code require to get the dsa_port structure corresponding to a slave net_device. For this purpose, introduce a dsa_slave_to_port() helper. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 15:12:15 +00:00
struct dsa_switch *ds = dp->ds;
net: dsa: Add support for switch EEPROM access On some chips it is possible to access the switch eeprom. Add infrastructure support for it. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-29 17:45:01 +00:00
net: dsa: rename switch operations structure Now that the dsa_switch_driver structure contains only function pointers as it is supposed to, rename it to the more appropriate dsa_switch_ops, uniformly to any other operations structure in the kernel. No functional changes here, basically just the result of something like: s/dsa_switch_driver *drv/dsa_switch_ops *ops/g However keep the {un,}register_switch_driver functions and their dsa_switch_drivers list as is, since they represent the -- likely to be deprecated soon -- legacy DSA registration framework. In the meantime, also fix the following checks from checkpatch.pl to make it happy with this patch: CHECK: Comparison to NULL could be written "!ops" #403: FILE: net/dsa/dsa.c:470: + if (ops == NULL) { CHECK: Comparison to NULL could be written "ds->ops->get_strings" #773: FILE: net/dsa/slave.c:697: + if (ds->ops->get_strings != NULL) CHECK: Comparison to NULL could be written "ds->ops->get_ethtool_stats" #824: FILE: net/dsa/slave.c:785: + if (ds->ops->get_ethtool_stats != NULL) CHECK: Comparison to NULL could be written "ds->ops->get_sset_count" #835: FILE: net/dsa/slave.c:798: + if (ds->ops->get_sset_count != NULL) total: 0 errors, 0 warnings, 4 checks, 784 lines checked Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23 16:38:56 +00:00
if (ds->ops->set_eeprom)
return ds->ops->set_eeprom(ds, eeprom, data);
net: dsa: Add support for switch EEPROM access On some chips it is possible to access the switch eeprom. Add infrastructure support for it. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-29 17:45:01 +00:00
return -EOPNOTSUPP;
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static void dsa_user_get_strings(struct net_device *dev,
uint32_t stringset, uint8_t *data)
net: Distributed Switch Architecture protocol support Distributed Switch Architecture is a protocol for managing hardware switch chips. It consists of a set of MII management registers and commands to configure the switch, and an ethernet header format to signal which of the ports of the switch a packet was received from or is intended to be sent to. The switches that this driver supports are typically embedded in access points and routers, and a typical setup with a DSA switch looks something like this: +-----------+ +-----------+ | | RGMII | | | +-------+ +------ 1000baseT MDI ("WAN") | | | 6-port +------ 1000baseT MDI ("LAN1") | CPU | | ethernet +------ 1000baseT MDI ("LAN2") | |MIImgmt| switch +------ 1000baseT MDI ("LAN3") | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4") | | | | +-----------+ +-----------+ The switch driver presents each port on the switch as a separate network interface to Linux, polls the switch to maintain software link state of those ports, forwards MII management interface accesses to those network interfaces (e.g. as done by ethtool) to the switch, and exposes the switch's hardware statistics counters via the appropriate Linux kernel interfaces. This initial patch supports the MII management interface register layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and supports the "Ethertype DSA" packet tagging format. (There is no officially registered ethertype for the Ethertype DSA packet format, so we just grab a random one. The ethertype to use is programmed into the switch, and the switch driver uses the value of ETH_P_EDSA for this, so this define can be changed at any time in the future if the one we chose is allocated to another protocol or if Ethertype DSA gets its own officially registered ethertype, and everything will continue to work.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 13:44:02 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: add slave to port helper Many portions of DSA core code require to get the dsa_port structure corresponding to a slave net_device. For this purpose, introduce a dsa_slave_to_port() helper. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 15:12:15 +00:00
struct dsa_switch *ds = dp->ds;
net: Distributed Switch Architecture protocol support Distributed Switch Architecture is a protocol for managing hardware switch chips. It consists of a set of MII management registers and commands to configure the switch, and an ethernet header format to signal which of the ports of the switch a packet was received from or is intended to be sent to. The switches that this driver supports are typically embedded in access points and routers, and a typical setup with a DSA switch looks something like this: +-----------+ +-----------+ | | RGMII | | | +-------+ +------ 1000baseT MDI ("WAN") | | | 6-port +------ 1000baseT MDI ("LAN1") | CPU | | ethernet +------ 1000baseT MDI ("LAN2") | |MIImgmt| switch +------ 1000baseT MDI ("LAN3") | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4") | | | | +-----------+ +-----------+ The switch driver presents each port on the switch as a separate network interface to Linux, polls the switch to maintain software link state of those ports, forwards MII management interface accesses to those network interfaces (e.g. as done by ethtool) to the switch, and exposes the switch's hardware statistics counters via the appropriate Linux kernel interfaces. This initial patch supports the MII management interface register layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and supports the "Ethertype DSA" packet tagging format. (There is no officially registered ethertype for the Ethertype DSA packet format, so we just grab a random one. The ethertype to use is programmed into the switch, and the switch driver uses the value of ETH_P_EDSA for this, so this define can be changed at any time in the future if the one we chose is allocated to another protocol or if Ethertype DSA gets its own officially registered ethertype, and everything will continue to work.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 13:44:02 +00:00
if (stringset == ETH_SS_STATS) {
int len = ETH_GSTRING_LEN;
net: dsa: remove deprecated strncpy `strncpy` is deprecated for use on NUL-terminated destination strings [1]. Even call sites utilizing length-bounded destination buffers should switch over to using `strtomem` or `strtomem_pad`. In this case, however, the compiler is unable to determine the size of the `data` buffer which renders `strtomem` unusable. Due to this, `strscpy` should be used. It should be noted that most call sites already zero-initialize the destination buffer. However, I've opted to use `strscpy_pad` to maintain the same exact behavior that `strncpy` produced (zero-padded tail up to `len`). Also see [3]. [1]: www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [2]: elixir.bootlin.com/linux/v6.3/source/net/ethtool/ioctl.c#L1944 [3]: manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html Link: https://github.com/KSPP/linux/issues/90 Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Justin Stitt <justinstitt@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-18 22:56:38 +00:00
strscpy_pad(data, "tx_packets", len);
strscpy_pad(data + len, "tx_bytes", len);
strscpy_pad(data + 2 * len, "rx_packets", len);
strscpy_pad(data + 3 * len, "rx_bytes", len);
net: dsa: rename switch operations structure Now that the dsa_switch_driver structure contains only function pointers as it is supposed to, rename it to the more appropriate dsa_switch_ops, uniformly to any other operations structure in the kernel. No functional changes here, basically just the result of something like: s/dsa_switch_driver *drv/dsa_switch_ops *ops/g However keep the {un,}register_switch_driver functions and their dsa_switch_drivers list as is, since they represent the -- likely to be deprecated soon -- legacy DSA registration framework. In the meantime, also fix the following checks from checkpatch.pl to make it happy with this patch: CHECK: Comparison to NULL could be written "!ops" #403: FILE: net/dsa/dsa.c:470: + if (ops == NULL) { CHECK: Comparison to NULL could be written "ds->ops->get_strings" #773: FILE: net/dsa/slave.c:697: + if (ds->ops->get_strings != NULL) CHECK: Comparison to NULL could be written "ds->ops->get_ethtool_stats" #824: FILE: net/dsa/slave.c:785: + if (ds->ops->get_ethtool_stats != NULL) CHECK: Comparison to NULL could be written "ds->ops->get_sset_count" #835: FILE: net/dsa/slave.c:798: + if (ds->ops->get_sset_count != NULL) total: 0 errors, 0 warnings, 4 checks, 784 lines checked Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23 16:38:56 +00:00
if (ds->ops->get_strings)
net: dsa: Pass stringset to ethtool operations Up until now we largely assumed that we were interested in ETH_SS_STATS type of strings for all ethtool operations, this is about to change with the introduction of additional string sets, e.g: ETH_SS_PHY_STATS. Update all functions to take an appropriate stringset argument and act on it when it is different than ETH_SS_STATS for now. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-25 19:12:50 +00:00
ds->ops->get_strings(ds, dp->index, stringset,
data + 4 * len);
net: dsa: enable selftest support for all switches by default Most of generic selftest should be able to work with probably all ethernet controllers. The DSA switches are not exception, so enable it by default at least for DSA. This patch was tested with SJA1105 and AR9331. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19 13:01:06 +00:00
} else if (stringset == ETH_SS_TEST) {
net_selftest_get_strings(data);
net: Distributed Switch Architecture protocol support Distributed Switch Architecture is a protocol for managing hardware switch chips. It consists of a set of MII management registers and commands to configure the switch, and an ethernet header format to signal which of the ports of the switch a packet was received from or is intended to be sent to. The switches that this driver supports are typically embedded in access points and routers, and a typical setup with a DSA switch looks something like this: +-----------+ +-----------+ | | RGMII | | | +-------+ +------ 1000baseT MDI ("WAN") | | | 6-port +------ 1000baseT MDI ("LAN1") | CPU | | ethernet +------ 1000baseT MDI ("LAN2") | |MIImgmt| switch +------ 1000baseT MDI ("LAN3") | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4") | | | | +-----------+ +-----------+ The switch driver presents each port on the switch as a separate network interface to Linux, polls the switch to maintain software link state of those ports, forwards MII management interface accesses to those network interfaces (e.g. as done by ethtool) to the switch, and exposes the switch's hardware statistics counters via the appropriate Linux kernel interfaces. This initial patch supports the MII management interface register layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and supports the "Ethertype DSA" packet tagging format. (There is no officially registered ethertype for the Ethertype DSA packet format, so we just grab a random one. The ethertype to use is programmed into the switch, and the switch driver uses the value of ETH_P_EDSA for this, so this define can be changed at any time in the future if the one we chose is allocated to another protocol or if Ethertype DSA gets its own officially registered ethertype, and everything will continue to work.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 13:44:02 +00:00
}
net: dsa: enable selftest support for all switches by default Most of generic selftest should be able to work with probably all ethernet controllers. The DSA switches are not exception, so enable it by default at least for DSA. This patch was tested with SJA1105 and AR9331. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19 13:01:06 +00:00
net: Distributed Switch Architecture protocol support Distributed Switch Architecture is a protocol for managing hardware switch chips. It consists of a set of MII management registers and commands to configure the switch, and an ethernet header format to signal which of the ports of the switch a packet was received from or is intended to be sent to. The switches that this driver supports are typically embedded in access points and routers, and a typical setup with a DSA switch looks something like this: +-----------+ +-----------+ | | RGMII | | | +-------+ +------ 1000baseT MDI ("WAN") | | | 6-port +------ 1000baseT MDI ("LAN1") | CPU | | ethernet +------ 1000baseT MDI ("LAN2") | |MIImgmt| switch +------ 1000baseT MDI ("LAN3") | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4") | | | | +-----------+ +-----------+ The switch driver presents each port on the switch as a separate network interface to Linux, polls the switch to maintain software link state of those ports, forwards MII management interface accesses to those network interfaces (e.g. as done by ethtool) to the switch, and exposes the switch's hardware statistics counters via the appropriate Linux kernel interfaces. This initial patch supports the MII management interface register layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and supports the "Ethertype DSA" packet tagging format. (There is no officially registered ethertype for the Ethertype DSA packet format, so we just grab a random one. The ethertype to use is programmed into the switch, and the switch driver uses the value of ETH_P_EDSA for this, so this define can be changed at any time in the future if the one we chose is allocated to another protocol or if Ethertype DSA gets its own officially registered ethertype, and everything will continue to work.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 13:44:02 +00:00
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static void dsa_user_get_ethtool_stats(struct net_device *dev,
struct ethtool_stats *stats,
uint64_t *data)
net: Distributed Switch Architecture protocol support Distributed Switch Architecture is a protocol for managing hardware switch chips. It consists of a set of MII management registers and commands to configure the switch, and an ethernet header format to signal which of the ports of the switch a packet was received from or is intended to be sent to. The switches that this driver supports are typically embedded in access points and routers, and a typical setup with a DSA switch looks something like this: +-----------+ +-----------+ | | RGMII | | | +-------+ +------ 1000baseT MDI ("WAN") | | | 6-port +------ 1000baseT MDI ("LAN1") | CPU | | ethernet +------ 1000baseT MDI ("LAN2") | |MIImgmt| switch +------ 1000baseT MDI ("LAN3") | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4") | | | | +-----------+ +-----------+ The switch driver presents each port on the switch as a separate network interface to Linux, polls the switch to maintain software link state of those ports, forwards MII management interface accesses to those network interfaces (e.g. as done by ethtool) to the switch, and exposes the switch's hardware statistics counters via the appropriate Linux kernel interfaces. This initial patch supports the MII management interface register layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and supports the "Ethertype DSA" packet tagging format. (There is no officially registered ethertype for the Ethertype DSA packet format, so we just grab a random one. The ethertype to use is programmed into the switch, and the switch driver uses the value of ETH_P_EDSA for this, so this define can be changed at any time in the future if the one we chose is allocated to another protocol or if Ethertype DSA gets its own officially registered ethertype, and everything will continue to work.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 13:44:02 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: add slave to port helper Many portions of DSA core code require to get the dsa_port structure corresponding to a slave net_device. For this purpose, introduce a dsa_slave_to_port() helper. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 15:12:15 +00:00
struct dsa_switch *ds = dp->ds;
net: dsa: User per-cpu 64-bit statistics During testing with a background iperf pushing 1Gbit/sec worth of traffic and having both ifconfig and ethtool collect statistics, we could see quite frequent deadlocks. Convert the often accessed DSA slave network devices statistics to per-cpu 64-bit statistics to remove these deadlocks and provide fast efficient statistics updates. Fixes: f613ed665bb3 ("net: dsa: Add support for 64-bit statistics") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-04 04:33:27 +00:00
struct pcpu_sw_netstats *s;
net: dsa: Add support for 64-bit statistics DSA slave network devices maintain a pair of bytes and packets counters for each directions, but these are not 64-bit capable. Re-use pcpu_sw_netstats which contains exactly what we need for that purpose and update the code path to report 64-bit capable statistics. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01 22:00:36 +00:00
unsigned int start;
net: dsa: User per-cpu 64-bit statistics During testing with a background iperf pushing 1Gbit/sec worth of traffic and having both ifconfig and ethtool collect statistics, we could see quite frequent deadlocks. Convert the often accessed DSA slave network devices statistics to per-cpu 64-bit statistics to remove these deadlocks and provide fast efficient statistics updates. Fixes: f613ed665bb3 ("net: dsa: Add support for 64-bit statistics") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-04 04:33:27 +00:00
int i;
for_each_possible_cpu(i) {
u64 tx_packets, tx_bytes, rx_packets, rx_bytes;
net: dsa: use net core stats64 handling Use netdev->tstats instead of a member of dsa_slave_priv for storing a pointer to the per-cpu counters. This allows us to use core functionality for statistics handling. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-07 20:49:46 +00:00
s = per_cpu_ptr(dev->tstats, i);
net: dsa: User per-cpu 64-bit statistics During testing with a background iperf pushing 1Gbit/sec worth of traffic and having both ifconfig and ethtool collect statistics, we could see quite frequent deadlocks. Convert the often accessed DSA slave network devices statistics to per-cpu 64-bit statistics to remove these deadlocks and provide fast efficient statistics updates. Fixes: f613ed665bb3 ("net: dsa: Add support for 64-bit statistics") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-04 04:33:27 +00:00
do {
net: Remove the obsolte u64_stats_fetch_*_irq() users (net). Now that the 32bit UP oddity is gone and 32bit uses always a sequence count, there is no need for the fetch_irq() variants anymore. Convert to the regular interface. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-26 13:22:15 +00:00
start = u64_stats_fetch_begin(&s->syncp);
net: adopt u64_stats_t in struct pcpu_sw_netstats As explained in commit 316580b69d0a ("u64_stats: provide u64_stats_t type") we should use u64_stats_t and related accessors to avoid load/store tearing. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-08 15:46:37 +00:00
tx_packets = u64_stats_read(&s->tx_packets);
tx_bytes = u64_stats_read(&s->tx_bytes);
rx_packets = u64_stats_read(&s->rx_packets);
rx_bytes = u64_stats_read(&s->rx_bytes);
net: Remove the obsolte u64_stats_fetch_*_irq() users (net). Now that the 32bit UP oddity is gone and 32bit uses always a sequence count, there is no need for the fetch_irq() variants anymore. Convert to the regular interface. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-26 13:22:15 +00:00
} while (u64_stats_fetch_retry(&s->syncp, start));
net: dsa: User per-cpu 64-bit statistics During testing with a background iperf pushing 1Gbit/sec worth of traffic and having both ifconfig and ethtool collect statistics, we could see quite frequent deadlocks. Convert the often accessed DSA slave network devices statistics to per-cpu 64-bit statistics to remove these deadlocks and provide fast efficient statistics updates. Fixes: f613ed665bb3 ("net: dsa: Add support for 64-bit statistics") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-04 04:33:27 +00:00
data[0] += tx_packets;
data[1] += tx_bytes;
data[2] += rx_packets;
data[3] += rx_bytes;
}
net: dsa: rename switch operations structure Now that the dsa_switch_driver structure contains only function pointers as it is supposed to, rename it to the more appropriate dsa_switch_ops, uniformly to any other operations structure in the kernel. No functional changes here, basically just the result of something like: s/dsa_switch_driver *drv/dsa_switch_ops *ops/g However keep the {un,}register_switch_driver functions and their dsa_switch_drivers list as is, since they represent the -- likely to be deprecated soon -- legacy DSA registration framework. In the meantime, also fix the following checks from checkpatch.pl to make it happy with this patch: CHECK: Comparison to NULL could be written "!ops" #403: FILE: net/dsa/dsa.c:470: + if (ops == NULL) { CHECK: Comparison to NULL could be written "ds->ops->get_strings" #773: FILE: net/dsa/slave.c:697: + if (ds->ops->get_strings != NULL) CHECK: Comparison to NULL could be written "ds->ops->get_ethtool_stats" #824: FILE: net/dsa/slave.c:785: + if (ds->ops->get_ethtool_stats != NULL) CHECK: Comparison to NULL could be written "ds->ops->get_sset_count" #835: FILE: net/dsa/slave.c:798: + if (ds->ops->get_sset_count != NULL) total: 0 errors, 0 warnings, 4 checks, 784 lines checked Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23 16:38:56 +00:00
if (ds->ops->get_ethtool_stats)
net: dsa: add slave to port helper Many portions of DSA core code require to get the dsa_port structure corresponding to a slave net_device. For this purpose, introduce a dsa_slave_to_port() helper. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 15:12:15 +00:00
ds->ops->get_ethtool_stats(ds, dp->index, data + 4);
net: Distributed Switch Architecture protocol support Distributed Switch Architecture is a protocol for managing hardware switch chips. It consists of a set of MII management registers and commands to configure the switch, and an ethernet header format to signal which of the ports of the switch a packet was received from or is intended to be sent to. The switches that this driver supports are typically embedded in access points and routers, and a typical setup with a DSA switch looks something like this: +-----------+ +-----------+ | | RGMII | | | +-------+ +------ 1000baseT MDI ("WAN") | | | 6-port +------ 1000baseT MDI ("LAN1") | CPU | | ethernet +------ 1000baseT MDI ("LAN2") | |MIImgmt| switch +------ 1000baseT MDI ("LAN3") | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4") | | | | +-----------+ +-----------+ The switch driver presents each port on the switch as a separate network interface to Linux, polls the switch to maintain software link state of those ports, forwards MII management interface accesses to those network interfaces (e.g. as done by ethtool) to the switch, and exposes the switch's hardware statistics counters via the appropriate Linux kernel interfaces. This initial patch supports the MII management interface register layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and supports the "Ethertype DSA" packet tagging format. (There is no officially registered ethertype for the Ethertype DSA packet format, so we just grab a random one. The ethertype to use is programmed into the switch, and the switch driver uses the value of ETH_P_EDSA for this, so this define can be changed at any time in the future if the one we chose is allocated to another protocol or if Ethertype DSA gets its own officially registered ethertype, and everything will continue to work.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 13:44:02 +00:00
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_get_sset_count(struct net_device *dev, int sset)
net: Distributed Switch Architecture protocol support Distributed Switch Architecture is a protocol for managing hardware switch chips. It consists of a set of MII management registers and commands to configure the switch, and an ethernet header format to signal which of the ports of the switch a packet was received from or is intended to be sent to. The switches that this driver supports are typically embedded in access points and routers, and a typical setup with a DSA switch looks something like this: +-----------+ +-----------+ | | RGMII | | | +-------+ +------ 1000baseT MDI ("WAN") | | | 6-port +------ 1000baseT MDI ("LAN1") | CPU | | ethernet +------ 1000baseT MDI ("LAN2") | |MIImgmt| switch +------ 1000baseT MDI ("LAN3") | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4") | | | | +-----------+ +-----------+ The switch driver presents each port on the switch as a separate network interface to Linux, polls the switch to maintain software link state of those ports, forwards MII management interface accesses to those network interfaces (e.g. as done by ethtool) to the switch, and exposes the switch's hardware statistics counters via the appropriate Linux kernel interfaces. This initial patch supports the MII management interface register layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and supports the "Ethertype DSA" packet tagging format. (There is no officially registered ethertype for the Ethertype DSA packet format, so we just grab a random one. The ethertype to use is programmed into the switch, and the switch driver uses the value of ETH_P_EDSA for this, so this define can be changed at any time in the future if the one we chose is allocated to another protocol or if Ethertype DSA gets its own officially registered ethertype, and everything will continue to work.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 13:44:02 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: add slave to port helper Many portions of DSA core code require to get the dsa_port structure corresponding to a slave net_device. For this purpose, introduce a dsa_slave_to_port() helper. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 15:12:15 +00:00
struct dsa_switch *ds = dp->ds;
net: Distributed Switch Architecture protocol support Distributed Switch Architecture is a protocol for managing hardware switch chips. It consists of a set of MII management registers and commands to configure the switch, and an ethernet header format to signal which of the ports of the switch a packet was received from or is intended to be sent to. The switches that this driver supports are typically embedded in access points and routers, and a typical setup with a DSA switch looks something like this: +-----------+ +-----------+ | | RGMII | | | +-------+ +------ 1000baseT MDI ("WAN") | | | 6-port +------ 1000baseT MDI ("LAN1") | CPU | | ethernet +------ 1000baseT MDI ("LAN2") | |MIImgmt| switch +------ 1000baseT MDI ("LAN3") | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4") | | | | +-----------+ +-----------+ The switch driver presents each port on the switch as a separate network interface to Linux, polls the switch to maintain software link state of those ports, forwards MII management interface accesses to those network interfaces (e.g. as done by ethtool) to the switch, and exposes the switch's hardware statistics counters via the appropriate Linux kernel interfaces. This initial patch supports the MII management interface register layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and supports the "Ethertype DSA" packet tagging format. (There is no officially registered ethertype for the Ethertype DSA packet format, so we just grab a random one. The ethertype to use is programmed into the switch, and the switch driver uses the value of ETH_P_EDSA for this, so this define can be changed at any time in the future if the one we chose is allocated to another protocol or if Ethertype DSA gets its own officially registered ethertype, and everything will continue to work.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 13:44:02 +00:00
if (sset == ETH_SS_STATS) {
net: dsa: fix error code getting shifted with 4 in dsa_slave_get_sset_count DSA implements a bunch of 'standardized' ethtool statistics counters, namely tx_packets, tx_bytes, rx_packets, rx_bytes. So whatever the hardware driver returns in .get_sset_count(), we need to add 4 to that. That is ok, except that .get_sset_count() can return a negative error code, for example: b53_get_sset_count -> phy_ethtool_get_sset_count -> return -EIO -EIO is -5, and with 4 added to it, it becomes -1, aka -EPERM. One can imagine that certain error codes may even become positive, although based on code inspection I did not see instances of that. Check the error code first, if it is negative return it as-is. Based on a similar patch for dsa_master_get_strings from Dan Carpenter: https://patchwork.kernel.org/project/netdevbpf/patch/YJaSe3RPgn7gKxZv@mwanda/ Fixes: 91da11f870f0 ("net: Distributed Switch Architecture protocol support") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-09 19:33:38 +00:00
int count = 0;
net: Distributed Switch Architecture protocol support Distributed Switch Architecture is a protocol for managing hardware switch chips. It consists of a set of MII management registers and commands to configure the switch, and an ethernet header format to signal which of the ports of the switch a packet was received from or is intended to be sent to. The switches that this driver supports are typically embedded in access points and routers, and a typical setup with a DSA switch looks something like this: +-----------+ +-----------+ | | RGMII | | | +-------+ +------ 1000baseT MDI ("WAN") | | | 6-port +------ 1000baseT MDI ("LAN1") | CPU | | ethernet +------ 1000baseT MDI ("LAN2") | |MIImgmt| switch +------ 1000baseT MDI ("LAN3") | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4") | | | | +-----------+ +-----------+ The switch driver presents each port on the switch as a separate network interface to Linux, polls the switch to maintain software link state of those ports, forwards MII management interface accesses to those network interfaces (e.g. as done by ethtool) to the switch, and exposes the switch's hardware statistics counters via the appropriate Linux kernel interfaces. This initial patch supports the MII management interface register layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and supports the "Ethertype DSA" packet tagging format. (There is no officially registered ethertype for the Ethertype DSA packet format, so we just grab a random one. The ethertype to use is programmed into the switch, and the switch driver uses the value of ETH_P_EDSA for this, so this define can be changed at any time in the future if the one we chose is allocated to another protocol or if Ethertype DSA gets its own officially registered ethertype, and everything will continue to work.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 13:44:02 +00:00
net: dsa: fix error code getting shifted with 4 in dsa_slave_get_sset_count DSA implements a bunch of 'standardized' ethtool statistics counters, namely tx_packets, tx_bytes, rx_packets, rx_bytes. So whatever the hardware driver returns in .get_sset_count(), we need to add 4 to that. That is ok, except that .get_sset_count() can return a negative error code, for example: b53_get_sset_count -> phy_ethtool_get_sset_count -> return -EIO -EIO is -5, and with 4 added to it, it becomes -1, aka -EPERM. One can imagine that certain error codes may even become positive, although based on code inspection I did not see instances of that. Check the error code first, if it is negative return it as-is. Based on a similar patch for dsa_master_get_strings from Dan Carpenter: https://patchwork.kernel.org/project/netdevbpf/patch/YJaSe3RPgn7gKxZv@mwanda/ Fixes: 91da11f870f0 ("net: Distributed Switch Architecture protocol support") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-09 19:33:38 +00:00
if (ds->ops->get_sset_count) {
count = ds->ops->get_sset_count(ds, dp->index, sset);
if (count < 0)
return count;
}
net: Distributed Switch Architecture protocol support Distributed Switch Architecture is a protocol for managing hardware switch chips. It consists of a set of MII management registers and commands to configure the switch, and an ethernet header format to signal which of the ports of the switch a packet was received from or is intended to be sent to. The switches that this driver supports are typically embedded in access points and routers, and a typical setup with a DSA switch looks something like this: +-----------+ +-----------+ | | RGMII | | | +-------+ +------ 1000baseT MDI ("WAN") | | | 6-port +------ 1000baseT MDI ("LAN1") | CPU | | ethernet +------ 1000baseT MDI ("LAN2") | |MIImgmt| switch +------ 1000baseT MDI ("LAN3") | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4") | | | | +-----------+ +-----------+ The switch driver presents each port on the switch as a separate network interface to Linux, polls the switch to maintain software link state of those ports, forwards MII management interface accesses to those network interfaces (e.g. as done by ethtool) to the switch, and exposes the switch's hardware statistics counters via the appropriate Linux kernel interfaces. This initial patch supports the MII management interface register layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and supports the "Ethertype DSA" packet tagging format. (There is no officially registered ethertype for the Ethertype DSA packet format, so we just grab a random one. The ethertype to use is programmed into the switch, and the switch driver uses the value of ETH_P_EDSA for this, so this define can be changed at any time in the future if the one we chose is allocated to another protocol or if Ethertype DSA gets its own officially registered ethertype, and everything will continue to work.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 13:44:02 +00:00
net: dsa: fix error code getting shifted with 4 in dsa_slave_get_sset_count DSA implements a bunch of 'standardized' ethtool statistics counters, namely tx_packets, tx_bytes, rx_packets, rx_bytes. So whatever the hardware driver returns in .get_sset_count(), we need to add 4 to that. That is ok, except that .get_sset_count() can return a negative error code, for example: b53_get_sset_count -> phy_ethtool_get_sset_count -> return -EIO -EIO is -5, and with 4 added to it, it becomes -1, aka -EPERM. One can imagine that certain error codes may even become positive, although based on code inspection I did not see instances of that. Check the error code first, if it is negative return it as-is. Based on a similar patch for dsa_master_get_strings from Dan Carpenter: https://patchwork.kernel.org/project/netdevbpf/patch/YJaSe3RPgn7gKxZv@mwanda/ Fixes: 91da11f870f0 ("net: Distributed Switch Architecture protocol support") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-09 19:33:38 +00:00
return count + 4;
net: dsa: enable selftest support for all switches by default Most of generic selftest should be able to work with probably all ethernet controllers. The DSA switches are not exception, so enable it by default at least for DSA. This patch was tested with SJA1105 and AR9331. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19 13:01:06 +00:00
} else if (sset == ETH_SS_TEST) {
return net_selftest_get_count();
net: Distributed Switch Architecture protocol support Distributed Switch Architecture is a protocol for managing hardware switch chips. It consists of a set of MII management registers and commands to configure the switch, and an ethernet header format to signal which of the ports of the switch a packet was received from or is intended to be sent to. The switches that this driver supports are typically embedded in access points and routers, and a typical setup with a DSA switch looks something like this: +-----------+ +-----------+ | | RGMII | | | +-------+ +------ 1000baseT MDI ("WAN") | | | 6-port +------ 1000baseT MDI ("LAN1") | CPU | | ethernet +------ 1000baseT MDI ("LAN2") | |MIImgmt| switch +------ 1000baseT MDI ("LAN3") | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4") | | | | +-----------+ +-----------+ The switch driver presents each port on the switch as a separate network interface to Linux, polls the switch to maintain software link state of those ports, forwards MII management interface accesses to those network interfaces (e.g. as done by ethtool) to the switch, and exposes the switch's hardware statistics counters via the appropriate Linux kernel interfaces. This initial patch supports the MII management interface register layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and supports the "Ethertype DSA" packet tagging format. (There is no officially registered ethertype for the Ethertype DSA packet format, so we just grab a random one. The ethertype to use is programmed into the switch, and the switch driver uses the value of ETH_P_EDSA for this, so this define can be changed at any time in the future if the one we chose is allocated to another protocol or if Ethertype DSA gets its own officially registered ethertype, and everything will continue to work.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 13:44:02 +00:00
}
return -EOPNOTSUPP;
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static void dsa_user_get_eth_phy_stats(struct net_device *dev,
struct ethtool_eth_phy_stats *phy_stats)
net: dsa: allow reporting of standard ethtool stats for slave devices Jakub pointed out that we have a new ethtool API for reporting device statistics in a standardized way, via .get_eth_{phy,mac,ctrl}_stats. Add a small amount of plumbing to allow DSA drivers to take advantage of this when exposing statistics. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-18 09:37:57 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: allow reporting of standard ethtool stats for slave devices Jakub pointed out that we have a new ethtool API for reporting device statistics in a standardized way, via .get_eth_{phy,mac,ctrl}_stats. Add a small amount of plumbing to allow DSA drivers to take advantage of this when exposing statistics. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-18 09:37:57 +00:00
struct dsa_switch *ds = dp->ds;
if (ds->ops->get_eth_phy_stats)
ds->ops->get_eth_phy_stats(ds, dp->index, phy_stats);
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static void dsa_user_get_eth_mac_stats(struct net_device *dev,
struct ethtool_eth_mac_stats *mac_stats)
net: dsa: allow reporting of standard ethtool stats for slave devices Jakub pointed out that we have a new ethtool API for reporting device statistics in a standardized way, via .get_eth_{phy,mac,ctrl}_stats. Add a small amount of plumbing to allow DSA drivers to take advantage of this when exposing statistics. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-18 09:37:57 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: allow reporting of standard ethtool stats for slave devices Jakub pointed out that we have a new ethtool API for reporting device statistics in a standardized way, via .get_eth_{phy,mac,ctrl}_stats. Add a small amount of plumbing to allow DSA drivers to take advantage of this when exposing statistics. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-18 09:37:57 +00:00
struct dsa_switch *ds = dp->ds;
if (ds->ops->get_eth_mac_stats)
ds->ops->get_eth_mac_stats(ds, dp->index, mac_stats);
}
static void
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dsa_user_get_eth_ctrl_stats(struct net_device *dev,
struct ethtool_eth_ctrl_stats *ctrl_stats)
net: dsa: allow reporting of standard ethtool stats for slave devices Jakub pointed out that we have a new ethtool API for reporting device statistics in a standardized way, via .get_eth_{phy,mac,ctrl}_stats. Add a small amount of plumbing to allow DSA drivers to take advantage of this when exposing statistics. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-18 09:37:57 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: allow reporting of standard ethtool stats for slave devices Jakub pointed out that we have a new ethtool API for reporting device statistics in a standardized way, via .get_eth_{phy,mac,ctrl}_stats. Add a small amount of plumbing to allow DSA drivers to take advantage of this when exposing statistics. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-18 09:37:57 +00:00
struct dsa_switch *ds = dp->ds;
if (ds->ops->get_eth_ctrl_stats)
ds->ops->get_eth_ctrl_stats(ds, dp->index, ctrl_stats);
}
net: dsa: add support for ethtool get_rmon_stats() Add support to allow dsa drivers to specify the .get_rmon_stats() operation. Signed-off-by: Clément Léger <clement.leger@bootlin.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-24 14:39:47 +00:00
static void
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dsa_user_get_rmon_stats(struct net_device *dev,
struct ethtool_rmon_stats *rmon_stats,
const struct ethtool_rmon_hist_range **ranges)
net: dsa: add support for ethtool get_rmon_stats() Add support to allow dsa drivers to specify the .get_rmon_stats() operation. Signed-off-by: Clément Léger <clement.leger@bootlin.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-24 14:39:47 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: add support for ethtool get_rmon_stats() Add support to allow dsa drivers to specify the .get_rmon_stats() operation. Signed-off-by: Clément Léger <clement.leger@bootlin.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-24 14:39:47 +00:00
struct dsa_switch *ds = dp->ds;
if (ds->ops->get_rmon_stats)
ds->ops->get_rmon_stats(ds, dp->index, rmon_stats, ranges);
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static void dsa_user_net_selftest(struct net_device *ndev,
struct ethtool_test *etest, u64 *buf)
net: dsa: enable selftest support for all switches by default Most of generic selftest should be able to work with probably all ethernet controllers. The DSA switches are not exception, so enable it by default at least for DSA. This patch was tested with SJA1105 and AR9331. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19 13:01:06 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(ndev);
net: dsa: enable selftest support for all switches by default Most of generic selftest should be able to work with probably all ethernet controllers. The DSA switches are not exception, so enable it by default at least for DSA. This patch was tested with SJA1105 and AR9331. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19 13:01:06 +00:00
struct dsa_switch *ds = dp->ds;
if (ds->ops->self_test) {
ds->ops->self_test(ds, dp->index, etest, buf);
return;
}
net_selftest(ndev, etest, buf);
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_get_mm(struct net_device *dev,
struct ethtool_mm_state *state)
net: dsa: add plumbing for changing and getting MAC merge layer state The DSA core is in charge of the ethtool_ops of the net devices associated with switch ports, so in case a hardware driver supports the MAC merge layer, DSA must pass the callbacks through to the driver. Add support for precisely that. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-19 12:27:00 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: add plumbing for changing and getting MAC merge layer state The DSA core is in charge of the ethtool_ops of the net devices associated with switch ports, so in case a hardware driver supports the MAC merge layer, DSA must pass the callbacks through to the driver. Add support for precisely that. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-19 12:27:00 +00:00
struct dsa_switch *ds = dp->ds;
if (!ds->ops->get_mm)
return -EOPNOTSUPP;
return ds->ops->get_mm(ds, dp->index, state);
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_set_mm(struct net_device *dev, struct ethtool_mm_cfg *cfg,
struct netlink_ext_ack *extack)
net: dsa: add plumbing for changing and getting MAC merge layer state The DSA core is in charge of the ethtool_ops of the net devices associated with switch ports, so in case a hardware driver supports the MAC merge layer, DSA must pass the callbacks through to the driver. Add support for precisely that. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-19 12:27:00 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: add plumbing for changing and getting MAC merge layer state The DSA core is in charge of the ethtool_ops of the net devices associated with switch ports, so in case a hardware driver supports the MAC merge layer, DSA must pass the callbacks through to the driver. Add support for precisely that. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-19 12:27:00 +00:00
struct dsa_switch *ds = dp->ds;
if (!ds->ops->set_mm)
return -EOPNOTSUPP;
return ds->ops->set_mm(ds, dp->index, cfg, extack);
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static void dsa_user_get_mm_stats(struct net_device *dev,
struct ethtool_mm_stats *stats)
net: dsa: add plumbing for changing and getting MAC merge layer state The DSA core is in charge of the ethtool_ops of the net devices associated with switch ports, so in case a hardware driver supports the MAC merge layer, DSA must pass the callbacks through to the driver. Add support for precisely that. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-19 12:27:00 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: add plumbing for changing and getting MAC merge layer state The DSA core is in charge of the ethtool_ops of the net devices associated with switch ports, so in case a hardware driver supports the MAC merge layer, DSA must pass the callbacks through to the driver. Add support for precisely that. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-19 12:27:00 +00:00
struct dsa_switch *ds = dp->ds;
if (ds->ops->get_mm_stats)
ds->ops->get_mm_stats(ds, dp->index, stats);
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static void dsa_user_get_wol(struct net_device *dev, struct ethtool_wolinfo *w)
net: dsa: add {get, set}_wol callbacks to slave devices Allow switch drivers to implement per-port Wake-on-LAN getter and setters. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19 00:31:24 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: add slave to port helper Many portions of DSA core code require to get the dsa_port structure corresponding to a slave net_device. For this purpose, introduce a dsa_slave_to_port() helper. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 15:12:15 +00:00
struct dsa_switch *ds = dp->ds;
net: dsa: add {get, set}_wol callbacks to slave devices Allow switch drivers to implement per-port Wake-on-LAN getter and setters. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19 00:31:24 +00:00
net: dsa: Plug in PHYLINK support Add support for PHYLINK within the DSA subsystem in order to support more complex devices such as pluggable (SFP) and non-pluggable (SFF) modules, 10G PHYs, and traditional PHYs. Using PHYLINK allows us to drop some amount of complexity we had while probing fixed and non-fixed PHYs using Device Tree. Because PHYLINK separates the Ethernet MAC/port configuration into different stages, we let switch drivers implement those, and for now, we maintain functionality by calling dsa_slave_adjust_link() during phylink_mac_link_{up,down} which provides semantically equivalent steps. Drivers willing to take advantage of PHYLINK should implement the phylink_mac_* operations that DSA wraps. We cannot quite remove the adjust_link() callback just yet, because a number of drivers rely on that for configuring their "CPU" and "DSA" ports, this is done dsa_port_setup_phy_of() and dsa_port_fixed_link_register_of() still. Drivers that utilize fixed links for user-facing ports (e.g: bcm_sf2) will need to implement phylink_mac_ops from now on to preserve functionality, since PHYLINK *does not* create a phy_device instance for fixed links. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 20:17:36 +00:00
phylink_ethtool_get_wol(dp->pl, w);
net: dsa: rename switch operations structure Now that the dsa_switch_driver structure contains only function pointers as it is supposed to, rename it to the more appropriate dsa_switch_ops, uniformly to any other operations structure in the kernel. No functional changes here, basically just the result of something like: s/dsa_switch_driver *drv/dsa_switch_ops *ops/g However keep the {un,}register_switch_driver functions and their dsa_switch_drivers list as is, since they represent the -- likely to be deprecated soon -- legacy DSA registration framework. In the meantime, also fix the following checks from checkpatch.pl to make it happy with this patch: CHECK: Comparison to NULL could be written "!ops" #403: FILE: net/dsa/dsa.c:470: + if (ops == NULL) { CHECK: Comparison to NULL could be written "ds->ops->get_strings" #773: FILE: net/dsa/slave.c:697: + if (ds->ops->get_strings != NULL) CHECK: Comparison to NULL could be written "ds->ops->get_ethtool_stats" #824: FILE: net/dsa/slave.c:785: + if (ds->ops->get_ethtool_stats != NULL) CHECK: Comparison to NULL could be written "ds->ops->get_sset_count" #835: FILE: net/dsa/slave.c:798: + if (ds->ops->get_sset_count != NULL) total: 0 errors, 0 warnings, 4 checks, 784 lines checked Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23 16:38:56 +00:00
if (ds->ops->get_wol)
net: dsa: add slave to port helper Many portions of DSA core code require to get the dsa_port structure corresponding to a slave net_device. For this purpose, introduce a dsa_slave_to_port() helper. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 15:12:15 +00:00
ds->ops->get_wol(ds, dp->index, w);
net: dsa: add {get, set}_wol callbacks to slave devices Allow switch drivers to implement per-port Wake-on-LAN getter and setters. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19 00:31:24 +00:00
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_set_wol(struct net_device *dev, struct ethtool_wolinfo *w)
net: dsa: add {get, set}_wol callbacks to slave devices Allow switch drivers to implement per-port Wake-on-LAN getter and setters. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19 00:31:24 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: add slave to port helper Many portions of DSA core code require to get the dsa_port structure corresponding to a slave net_device. For this purpose, introduce a dsa_slave_to_port() helper. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 15:12:15 +00:00
struct dsa_switch *ds = dp->ds;
net: dsa: add {get, set}_wol callbacks to slave devices Allow switch drivers to implement per-port Wake-on-LAN getter and setters. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19 00:31:24 +00:00
int ret = -EOPNOTSUPP;
net: dsa: Plug in PHYLINK support Add support for PHYLINK within the DSA subsystem in order to support more complex devices such as pluggable (SFP) and non-pluggable (SFF) modules, 10G PHYs, and traditional PHYs. Using PHYLINK allows us to drop some amount of complexity we had while probing fixed and non-fixed PHYs using Device Tree. Because PHYLINK separates the Ethernet MAC/port configuration into different stages, we let switch drivers implement those, and for now, we maintain functionality by calling dsa_slave_adjust_link() during phylink_mac_link_{up,down} which provides semantically equivalent steps. Drivers willing to take advantage of PHYLINK should implement the phylink_mac_* operations that DSA wraps. We cannot quite remove the adjust_link() callback just yet, because a number of drivers rely on that for configuring their "CPU" and "DSA" ports, this is done dsa_port_setup_phy_of() and dsa_port_fixed_link_register_of() still. Drivers that utilize fixed links for user-facing ports (e.g: bcm_sf2) will need to implement phylink_mac_ops from now on to preserve functionality, since PHYLINK *does not* create a phy_device instance for fixed links. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 20:17:36 +00:00
phylink_ethtool_set_wol(dp->pl, w);
net: dsa: rename switch operations structure Now that the dsa_switch_driver structure contains only function pointers as it is supposed to, rename it to the more appropriate dsa_switch_ops, uniformly to any other operations structure in the kernel. No functional changes here, basically just the result of something like: s/dsa_switch_driver *drv/dsa_switch_ops *ops/g However keep the {un,}register_switch_driver functions and their dsa_switch_drivers list as is, since they represent the -- likely to be deprecated soon -- legacy DSA registration framework. In the meantime, also fix the following checks from checkpatch.pl to make it happy with this patch: CHECK: Comparison to NULL could be written "!ops" #403: FILE: net/dsa/dsa.c:470: + if (ops == NULL) { CHECK: Comparison to NULL could be written "ds->ops->get_strings" #773: FILE: net/dsa/slave.c:697: + if (ds->ops->get_strings != NULL) CHECK: Comparison to NULL could be written "ds->ops->get_ethtool_stats" #824: FILE: net/dsa/slave.c:785: + if (ds->ops->get_ethtool_stats != NULL) CHECK: Comparison to NULL could be written "ds->ops->get_sset_count" #835: FILE: net/dsa/slave.c:798: + if (ds->ops->get_sset_count != NULL) total: 0 errors, 0 warnings, 4 checks, 784 lines checked Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23 16:38:56 +00:00
if (ds->ops->set_wol)
net: dsa: add slave to port helper Many portions of DSA core code require to get the dsa_port structure corresponding to a slave net_device. For this purpose, introduce a dsa_slave_to_port() helper. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 15:12:15 +00:00
ret = ds->ops->set_wol(ds, dp->index, w);
net: dsa: add {get, set}_wol callbacks to slave devices Allow switch drivers to implement per-port Wake-on-LAN getter and setters. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19 00:31:24 +00:00
return ret;
}
ethtool: replace struct ethtool_eee with a new struct ethtool_keee on kernel side In order to pass EEE link modes beyond bit 32 to userspace we have to complement the 32 bit bitmaps in struct ethtool_eee with linkmode bitmaps. Therefore, similar to ethtool_link_settings and ethtool_link_ksettings, add a struct ethtool_keee. In a first step it's an identical copy of ethtool_eee. This patch simply does a s/ethtool_eee/ethtool_keee/g for all users. No functional change intended. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-27 13:25:09 +00:00
static int dsa_user_set_eee(struct net_device *dev, struct ethtool_keee *e)
net: dsa: allow switches driver to implement get/set EEE Allow switches driver to query and enable/disable EEE on a per-port basis by implementing the ethtool_{get,set}_eee settings and delegating these operations to the switch driver. set_eee() will need to coordinate with the PHY driver to make sure that EEE is enabled, the link-partner supports it and the auto-negotiation result is satisfactory. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-25 00:05:21 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: add slave to port helper Many portions of DSA core code require to get the dsa_port structure corresponding to a slave net_device. For this purpose, introduce a dsa_slave_to_port() helper. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 15:12:15 +00:00
struct dsa_switch *ds = dp->ds;
net: dsa: allow switches driver to implement get/set EEE Allow switches driver to query and enable/disable EEE on a per-port basis by implementing the ethtool_{get,set}_eee settings and delegating these operations to the switch driver. set_eee() will need to coordinate with the PHY driver to make sure that EEE is enabled, the link-partner supports it and the auto-negotiation result is satisfactory. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-25 00:05:21 +00:00
int ret;
net: dsa: PHY device is mandatory for EEE The port's PHY and MAC are both implied in EEE. The current code does not call the PHY operations if the related device is NULL. Change that by returning -ENODEV if there's no PHY device attached to the interface. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01 20:32:31 +00:00
/* Port's PHY and MAC both need to be EEE capable */
net: dsa: Fix NULL checking in dsa_slave_set_eee() This function can't succeed if dp->pl is NULL. It will Oops inside the call to return phylink_ethtool_get_eee(dp->pl, e); Fixes: 1be52e97ed3e ("dsa: slave: eee: Allow ports to use phylink") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06 15:35:15 +00:00
if (!dev->phydev || !dp->pl)
net: dsa: PHY device is mandatory for EEE The port's PHY and MAC are both implied in EEE. The current code does not call the PHY operations if the related device is NULL. Change that by returning -ENODEV if there's no PHY device attached to the interface. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01 20:32:31 +00:00
return -ENODEV;
net: dsa: rename switch EEE ops To avoid confusion with the PHY EEE settings, rename the .set_eee and .get_eee ops to respectively .set_mac_eee and .get_mac_eee. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01 20:32:41 +00:00
if (!ds->ops->set_mac_eee)
net: dsa: allow switches driver to implement get/set EEE Allow switches driver to query and enable/disable EEE on a per-port basis by implementing the ethtool_{get,set}_eee settings and delegating these operations to the switch driver. set_eee() will need to coordinate with the PHY driver to make sure that EEE is enabled, the link-partner supports it and the auto-negotiation result is satisfactory. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-25 00:05:21 +00:00
return -EOPNOTSUPP;
net: dsa: add slave to port helper Many portions of DSA core code require to get the dsa_port structure corresponding to a slave net_device. For this purpose, introduce a dsa_slave_to_port() helper. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 15:12:15 +00:00
ret = ds->ops->set_mac_eee(ds, dp->index, e);
net: dsa: allow switches driver to implement get/set EEE Allow switches driver to query and enable/disable EEE on a per-port basis by implementing the ethtool_{get,set}_eee settings and delegating these operations to the switch driver. set_eee() will need to coordinate with the PHY driver to make sure that EEE is enabled, the link-partner supports it and the auto-negotiation result is satisfactory. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-25 00:05:21 +00:00
if (ret)
return ret;
net: dsa: Plug in PHYLINK support Add support for PHYLINK within the DSA subsystem in order to support more complex devices such as pluggable (SFP) and non-pluggable (SFF) modules, 10G PHYs, and traditional PHYs. Using PHYLINK allows us to drop some amount of complexity we had while probing fixed and non-fixed PHYs using Device Tree. Because PHYLINK separates the Ethernet MAC/port configuration into different stages, we let switch drivers implement those, and for now, we maintain functionality by calling dsa_slave_adjust_link() during phylink_mac_link_{up,down} which provides semantically equivalent steps. Drivers willing to take advantage of PHYLINK should implement the phylink_mac_* operations that DSA wraps. We cannot quite remove the adjust_link() callback just yet, because a number of drivers rely on that for configuring their "CPU" and "DSA" ports, this is done dsa_port_setup_phy_of() and dsa_port_fixed_link_register_of() still. Drivers that utilize fixed links for user-facing ports (e.g: bcm_sf2) will need to implement phylink_mac_ops from now on to preserve functionality, since PHYLINK *does not* create a phy_device instance for fixed links. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 20:17:36 +00:00
return phylink_ethtool_set_eee(dp->pl, e);
net: dsa: allow switches driver to implement get/set EEE Allow switches driver to query and enable/disable EEE on a per-port basis by implementing the ethtool_{get,set}_eee settings and delegating these operations to the switch driver. set_eee() will need to coordinate with the PHY driver to make sure that EEE is enabled, the link-partner supports it and the auto-negotiation result is satisfactory. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-25 00:05:21 +00:00
}
ethtool: replace struct ethtool_eee with a new struct ethtool_keee on kernel side In order to pass EEE link modes beyond bit 32 to userspace we have to complement the 32 bit bitmaps in struct ethtool_eee with linkmode bitmaps. Therefore, similar to ethtool_link_settings and ethtool_link_ksettings, add a struct ethtool_keee. In a first step it's an identical copy of ethtool_eee. This patch simply does a s/ethtool_eee/ethtool_keee/g for all users. No functional change intended. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-27 13:25:09 +00:00
static int dsa_user_get_eee(struct net_device *dev, struct ethtool_keee *e)
net: dsa: allow switches driver to implement get/set EEE Allow switches driver to query and enable/disable EEE on a per-port basis by implementing the ethtool_{get,set}_eee settings and delegating these operations to the switch driver. set_eee() will need to coordinate with the PHY driver to make sure that EEE is enabled, the link-partner supports it and the auto-negotiation result is satisfactory. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-25 00:05:21 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: add slave to port helper Many portions of DSA core code require to get the dsa_port structure corresponding to a slave net_device. For this purpose, introduce a dsa_slave_to_port() helper. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 15:12:15 +00:00
struct dsa_switch *ds = dp->ds;
net: dsa: allow switches driver to implement get/set EEE Allow switches driver to query and enable/disable EEE on a per-port basis by implementing the ethtool_{get,set}_eee settings and delegating these operations to the switch driver. set_eee() will need to coordinate with the PHY driver to make sure that EEE is enabled, the link-partner supports it and the auto-negotiation result is satisfactory. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-25 00:05:21 +00:00
int ret;
net: dsa: PHY device is mandatory for EEE The port's PHY and MAC are both implied in EEE. The current code does not call the PHY operations if the related device is NULL. Change that by returning -ENODEV if there's no PHY device attached to the interface. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01 20:32:31 +00:00
/* Port's PHY and MAC both need to be EEE capable */
net: dsa: Fix NULL checking in dsa_slave_set_eee() This function can't succeed if dp->pl is NULL. It will Oops inside the call to return phylink_ethtool_get_eee(dp->pl, e); Fixes: 1be52e97ed3e ("dsa: slave: eee: Allow ports to use phylink") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06 15:35:15 +00:00
if (!dev->phydev || !dp->pl)
net: dsa: PHY device is mandatory for EEE The port's PHY and MAC are both implied in EEE. The current code does not call the PHY operations if the related device is NULL. Change that by returning -ENODEV if there's no PHY device attached to the interface. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01 20:32:31 +00:00
return -ENODEV;
net: dsa: rename switch EEE ops To avoid confusion with the PHY EEE settings, rename the .set_eee and .get_eee ops to respectively .set_mac_eee and .get_mac_eee. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01 20:32:41 +00:00
if (!ds->ops->get_mac_eee)
net: dsa: allow switches driver to implement get/set EEE Allow switches driver to query and enable/disable EEE on a per-port basis by implementing the ethtool_{get,set}_eee settings and delegating these operations to the switch driver. set_eee() will need to coordinate with the PHY driver to make sure that EEE is enabled, the link-partner supports it and the auto-negotiation result is satisfactory. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-25 00:05:21 +00:00
return -EOPNOTSUPP;
net: dsa: add slave to port helper Many portions of DSA core code require to get the dsa_port structure corresponding to a slave net_device. For this purpose, introduce a dsa_slave_to_port() helper. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 15:12:15 +00:00
ret = ds->ops->get_mac_eee(ds, dp->index, e);
net: dsa: allow switches driver to implement get/set EEE Allow switches driver to query and enable/disable EEE on a per-port basis by implementing the ethtool_{get,set}_eee settings and delegating these operations to the switch driver. set_eee() will need to coordinate with the PHY driver to make sure that EEE is enabled, the link-partner supports it and the auto-negotiation result is satisfactory. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-25 00:05:21 +00:00
if (ret)
return ret;
net: dsa: Plug in PHYLINK support Add support for PHYLINK within the DSA subsystem in order to support more complex devices such as pluggable (SFP) and non-pluggable (SFF) modules, 10G PHYs, and traditional PHYs. Using PHYLINK allows us to drop some amount of complexity we had while probing fixed and non-fixed PHYs using Device Tree. Because PHYLINK separates the Ethernet MAC/port configuration into different stages, we let switch drivers implement those, and for now, we maintain functionality by calling dsa_slave_adjust_link() during phylink_mac_link_{up,down} which provides semantically equivalent steps. Drivers willing to take advantage of PHYLINK should implement the phylink_mac_* operations that DSA wraps. We cannot quite remove the adjust_link() callback just yet, because a number of drivers rely on that for configuring their "CPU" and "DSA" ports, this is done dsa_port_setup_phy_of() and dsa_port_fixed_link_register_of() still. Drivers that utilize fixed links for user-facing ports (e.g: bcm_sf2) will need to implement phylink_mac_ops from now on to preserve functionality, since PHYLINK *does not* create a phy_device instance for fixed links. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 20:17:36 +00:00
return phylink_ethtool_get_eee(dp->pl, e);
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_get_link_ksettings(struct net_device *dev,
struct ethtool_link_ksettings *cmd)
net: dsa: Plug in PHYLINK support Add support for PHYLINK within the DSA subsystem in order to support more complex devices such as pluggable (SFP) and non-pluggable (SFF) modules, 10G PHYs, and traditional PHYs. Using PHYLINK allows us to drop some amount of complexity we had while probing fixed and non-fixed PHYs using Device Tree. Because PHYLINK separates the Ethernet MAC/port configuration into different stages, we let switch drivers implement those, and for now, we maintain functionality by calling dsa_slave_adjust_link() during phylink_mac_link_{up,down} which provides semantically equivalent steps. Drivers willing to take advantage of PHYLINK should implement the phylink_mac_* operations that DSA wraps. We cannot quite remove the adjust_link() callback just yet, because a number of drivers rely on that for configuring their "CPU" and "DSA" ports, this is done dsa_port_setup_phy_of() and dsa_port_fixed_link_register_of() still. Drivers that utilize fixed links for user-facing ports (e.g: bcm_sf2) will need to implement phylink_mac_ops from now on to preserve functionality, since PHYLINK *does not* create a phy_device instance for fixed links. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 20:17:36 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: Plug in PHYLINK support Add support for PHYLINK within the DSA subsystem in order to support more complex devices such as pluggable (SFP) and non-pluggable (SFF) modules, 10G PHYs, and traditional PHYs. Using PHYLINK allows us to drop some amount of complexity we had while probing fixed and non-fixed PHYs using Device Tree. Because PHYLINK separates the Ethernet MAC/port configuration into different stages, we let switch drivers implement those, and for now, we maintain functionality by calling dsa_slave_adjust_link() during phylink_mac_link_{up,down} which provides semantically equivalent steps. Drivers willing to take advantage of PHYLINK should implement the phylink_mac_* operations that DSA wraps. We cannot quite remove the adjust_link() callback just yet, because a number of drivers rely on that for configuring their "CPU" and "DSA" ports, this is done dsa_port_setup_phy_of() and dsa_port_fixed_link_register_of() still. Drivers that utilize fixed links for user-facing ports (e.g: bcm_sf2) will need to implement phylink_mac_ops from now on to preserve functionality, since PHYLINK *does not* create a phy_device instance for fixed links. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 20:17:36 +00:00
return phylink_ethtool_ksettings_get(dp->pl, cmd);
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_set_link_ksettings(struct net_device *dev,
const struct ethtool_link_ksettings *cmd)
net: dsa: Plug in PHYLINK support Add support for PHYLINK within the DSA subsystem in order to support more complex devices such as pluggable (SFP) and non-pluggable (SFF) modules, 10G PHYs, and traditional PHYs. Using PHYLINK allows us to drop some amount of complexity we had while probing fixed and non-fixed PHYs using Device Tree. Because PHYLINK separates the Ethernet MAC/port configuration into different stages, we let switch drivers implement those, and for now, we maintain functionality by calling dsa_slave_adjust_link() during phylink_mac_link_{up,down} which provides semantically equivalent steps. Drivers willing to take advantage of PHYLINK should implement the phylink_mac_* operations that DSA wraps. We cannot quite remove the adjust_link() callback just yet, because a number of drivers rely on that for configuring their "CPU" and "DSA" ports, this is done dsa_port_setup_phy_of() and dsa_port_fixed_link_register_of() still. Drivers that utilize fixed links for user-facing ports (e.g: bcm_sf2) will need to implement phylink_mac_ops from now on to preserve functionality, since PHYLINK *does not* create a phy_device instance for fixed links. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 20:17:36 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: Plug in PHYLINK support Add support for PHYLINK within the DSA subsystem in order to support more complex devices such as pluggable (SFP) and non-pluggable (SFF) modules, 10G PHYs, and traditional PHYs. Using PHYLINK allows us to drop some amount of complexity we had while probing fixed and non-fixed PHYs using Device Tree. Because PHYLINK separates the Ethernet MAC/port configuration into different stages, we let switch drivers implement those, and for now, we maintain functionality by calling dsa_slave_adjust_link() during phylink_mac_link_{up,down} which provides semantically equivalent steps. Drivers willing to take advantage of PHYLINK should implement the phylink_mac_* operations that DSA wraps. We cannot quite remove the adjust_link() callback just yet, because a number of drivers rely on that for configuring their "CPU" and "DSA" ports, this is done dsa_port_setup_phy_of() and dsa_port_fixed_link_register_of() still. Drivers that utilize fixed links for user-facing ports (e.g: bcm_sf2) will need to implement phylink_mac_ops from now on to preserve functionality, since PHYLINK *does not* create a phy_device instance for fixed links. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 20:17:36 +00:00
return phylink_ethtool_ksettings_set(dp->pl, cmd);
net: dsa: allow switches driver to implement get/set EEE Allow switches driver to query and enable/disable EEE on a per-port basis by implementing the ethtool_{get,set}_eee settings and delegating these operations to the switch driver. set_eee() will need to coordinate with the PHY driver to make sure that EEE is enabled, the link-partner supports it and the auto-negotiation result is satisfactory. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-25 00:05:21 +00:00
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static void dsa_user_get_pause_stats(struct net_device *dev,
struct ethtool_pause_stats *pause_stats)
net: dsa: add get_pause_stats support Add support for pause stats Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-28 08:51:52 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: add get_pause_stats support Add support for pause stats Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-28 08:51:52 +00:00
struct dsa_switch *ds = dp->ds;
if (ds->ops->get_pause_stats)
ds->ops->get_pause_stats(ds, dp->index, pause_stats);
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static void dsa_user_get_pauseparam(struct net_device *dev,
struct ethtool_pauseparam *pause)
net: dsa: add ethtool pause configuration support This patch adds glue logic to make pause settings per port configurable vie ethtool. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-29 21:32:48 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: add ethtool pause configuration support This patch adds glue logic to make pause settings per port configurable vie ethtool. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-29 21:32:48 +00:00
phylink_ethtool_get_pauseparam(dp->pl, pause);
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_set_pauseparam(struct net_device *dev,
struct ethtool_pauseparam *pause)
net: dsa: add ethtool pause configuration support This patch adds glue logic to make pause settings per port configurable vie ethtool. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-29 21:32:48 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: add ethtool pause configuration support This patch adds glue logic to make pause settings per port configurable vie ethtool. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-29 21:32:48 +00:00
return phylink_ethtool_set_pauseparam(dp->pl, pause);
}
net: dsa: Add netconsole support Add support for using DSA slave network devices with netconsole, which requires us to allocate and free custom netpoll instances and invoke the parent network device poll controller callback. In order for netconsole to work, we need to construct the DSA tag, but not queue the skb for transmission on the master network device xmit function. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-31 18:42:57 +00:00
#ifdef CONFIG_NET_POLL_CONTROLLER
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_netpoll_setup(struct net_device *dev,
struct netpoll_info *ni)
net: dsa: Add netconsole support Add support for using DSA slave network devices with netconsole, which requires us to allocate and free custom netpoll instances and invoke the parent network device poll controller callback. In order for netconsole to work, we need to construct the DSA tag, but not queue the skb for transmission on the master network device xmit function. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-31 18:42:57 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct net_device *conduit = dsa_user_to_conduit(dev);
struct dsa_user_priv *p = netdev_priv(dev);
net: dsa: Add netconsole support Add support for using DSA slave network devices with netconsole, which requires us to allocate and free custom netpoll instances and invoke the parent network device poll controller callback. In order for netconsole to work, we need to construct the DSA tag, but not queue the skb for transmission on the master network device xmit function. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-31 18:42:57 +00:00
struct netpoll *netpoll;
int err = 0;
netpoll = kzalloc(sizeof(*netpoll), GFP_KERNEL);
if (!netpoll)
return -ENOMEM;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
err = __netpoll_setup(netpoll, conduit);
net: dsa: Add netconsole support Add support for using DSA slave network devices with netconsole, which requires us to allocate and free custom netpoll instances and invoke the parent network device poll controller callback. In order for netconsole to work, we need to construct the DSA tag, but not queue the skb for transmission on the master network device xmit function. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-31 18:42:57 +00:00
if (err) {
kfree(netpoll);
goto out;
}
p->netpoll = netpoll;
out:
return err;
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static void dsa_user_netpoll_cleanup(struct net_device *dev)
net: dsa: Add netconsole support Add support for using DSA slave network devices with netconsole, which requires us to allocate and free custom netpoll instances and invoke the parent network device poll controller callback. In order for netconsole to work, we need to construct the DSA tag, but not queue the skb for transmission on the master network device xmit function. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-31 18:42:57 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_user_priv *p = netdev_priv(dev);
net: dsa: Add netconsole support Add support for using DSA slave network devices with netconsole, which requires us to allocate and free custom netpoll instances and invoke the parent network device poll controller callback. In order for netconsole to work, we need to construct the DSA tag, but not queue the skb for transmission on the master network device xmit function. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-31 18:42:57 +00:00
struct netpoll *netpoll = p->netpoll;
if (!netpoll)
return;
p->netpoll = NULL;
netpoll: allow cleanup to be synchronous This fixes a problem introduced by: commit 2cde6acd49da ("netpoll: Fix __netpoll_rcu_free so that it can hold the rtnl lock") When using netconsole on a bond, __netpoll_cleanup can asynchronously recurse multiple times, each __netpoll_free_async call can result in more __netpoll_free_async's. This means there is now a race between cleanup_work queues on multiple netpoll_info's on multiple devices and the configuration of a new netpoll. For example if a netconsole is set to enable 0, reconfigured, and enable 1 immediately, this netconsole will likely not work. Given the reason for __netpoll_free_async is it can be called when rtnl is not locked, if it is locked, we should be able to execute synchronously. It appears to be locked everywhere it's called from. Generalize the design pattern from the teaming driver for current callers of __netpoll_free_async. CC: Neil Horman <nhorman@tuxdriver.com> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-18 15:18:26 +00:00
__netpoll_free(netpoll);
net: dsa: Add netconsole support Add support for using DSA slave network devices with netconsole, which requires us to allocate and free custom netpoll instances and invoke the parent network device poll controller callback. In order for netconsole to work, we need to construct the DSA tag, but not queue the skb for transmission on the master network device xmit function. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-31 18:42:57 +00:00
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static void dsa_user_poll_controller(struct net_device *dev)
net: dsa: Add netconsole support Add support for using DSA slave network devices with netconsole, which requires us to allocate and free custom netpoll instances and invoke the parent network device poll controller callback. In order for netconsole to work, we need to construct the DSA tag, but not queue the skb for transmission on the master network device xmit function. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-31 18:42:57 +00:00
{
}
#endif
net: dsa: Add plumbing for port mirroring Add necessary plumbing at the slave network device level to have switch drivers implement ndo_setup_tc() and most particularly the cls_matchall classifier. We add support for two switch operations: port_add_mirror and port_del_mirror() which configure, on a per-port basis the mirror parameters requested from the cls_matchall classifier. Code is largely borrowed from the Mellanox Spectrum switch driver. Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 20:41:40 +00:00
static struct dsa_mall_tc_entry *
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dsa_user_mall_tc_entry_find(struct net_device *dev, unsigned long cookie)
net: dsa: Add plumbing for port mirroring Add necessary plumbing at the slave network device level to have switch drivers implement ndo_setup_tc() and most particularly the cls_matchall classifier. We add support for two switch operations: port_add_mirror and port_del_mirror() which configure, on a per-port basis the mirror parameters requested from the cls_matchall classifier. Code is largely borrowed from the Mellanox Spectrum switch driver. Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 20:41:40 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_user_priv *p = netdev_priv(dev);
net: dsa: Add plumbing for port mirroring Add necessary plumbing at the slave network device level to have switch drivers implement ndo_setup_tc() and most particularly the cls_matchall classifier. We add support for two switch operations: port_add_mirror and port_del_mirror() which configure, on a per-port basis the mirror parameters requested from the cls_matchall classifier. Code is largely borrowed from the Mellanox Spectrum switch driver. Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 20:41:40 +00:00
struct dsa_mall_tc_entry *mall_tc_entry;
list_for_each_entry(mall_tc_entry, &p->mall_tc_list, list)
if (mall_tc_entry->cookie == cookie)
return mall_tc_entry;
return NULL;
}
net: dsa: refactor matchall mirred action to separate function Make room for other actions for the matchall filter by keeping the mirred argument parsing self-contained in its own function. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-29 11:51:58 +00:00
static int
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dsa_user_add_cls_matchall_mirred(struct net_device *dev,
struct tc_cls_matchall_offload *cls,
bool ingress)
net: dsa: Add plumbing for port mirroring Add necessary plumbing at the slave network device level to have switch drivers implement ndo_setup_tc() and most particularly the cls_matchall classifier. We add support for two switch operations: port_add_mirror and port_del_mirror() which configure, on a per-port basis the mirror parameters requested from the cls_matchall classifier. Code is largely borrowed from the Mellanox Spectrum switch driver. Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 20:41:40 +00:00
{
net: dsa: pass extack to dsa_switch_ops :: port_mirror_add() Drivers might have error messages to propagate to user space, most common being that they support a single mirror port. Propagate the netlink extack so that they can inform user space in a verbal way of their limitations. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-16 20:41:43 +00:00
struct netlink_ext_ack *extack = cls->common.extack;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
struct dsa_user_priv *p = netdev_priv(dev);
net: dsa: refactor matchall mirred action to separate function Make room for other actions for the matchall filter by keeping the mirred argument parsing self-contained in its own function. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-29 11:51:58 +00:00
struct dsa_mall_mirror_tc_entry *mirror;
net: dsa: Add plumbing for port mirroring Add necessary plumbing at the slave network device level to have switch drivers implement ndo_setup_tc() and most particularly the cls_matchall classifier. We add support for two switch operations: port_add_mirror and port_del_mirror() which configure, on a per-port basis the mirror parameters requested from the cls_matchall classifier. Code is largely borrowed from the Mellanox Spectrum switch driver. Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 20:41:40 +00:00
struct dsa_mall_tc_entry *mall_tc_entry;
net: dsa: add slave to port helper Many portions of DSA core code require to get the dsa_port structure corresponding to a slave net_device. For this purpose, introduce a dsa_slave_to_port() helper. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 15:12:15 +00:00
struct dsa_switch *ds = dp->ds;
net/dsa: use intermediate representation for matchall offload Updates dsa hardware switch handling infrastructure to use the newer intermediate representation for flow actions in matchall offloads. Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04 11:46:19 +00:00
struct flow_action_entry *act;
net: dsa: add slave to port helper Many portions of DSA core code require to get the dsa_port structure corresponding to a slave net_device. For this purpose, introduce a dsa_slave_to_port() helper. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 15:12:15 +00:00
struct dsa_port *to_dp;
net: dsa: refactor matchall mirred action to separate function Make room for other actions for the matchall filter by keeping the mirred argument parsing self-contained in its own function. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-29 11:51:58 +00:00
int err;
net: dsa: Add plumbing for port mirroring Add necessary plumbing at the slave network device level to have switch drivers implement ndo_setup_tc() and most particularly the cls_matchall classifier. We add support for two switch operations: port_add_mirror and port_del_mirror() which configure, on a per-port basis the mirror parameters requested from the cls_matchall classifier. Code is largely borrowed from the Mellanox Spectrum switch driver. Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 20:41:40 +00:00
if (!ds->ops->port_mirror_add)
net: dsa: add port policers The approach taken to pass the port policer methods on to drivers is pragmatic. It is similar to the port mirroring implementation (in that the DSA core does all of the filter block interaction and only passes simple operations for the driver to implement) and dissimilar to how flow-based policers are going to be implemented (where the driver has full control over the flow_cls_offload data structure). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-29 11:51:59 +00:00
return -EOPNOTSUPP;
net: dsa: Add plumbing for port mirroring Add necessary plumbing at the slave network device level to have switch drivers implement ndo_setup_tc() and most particularly the cls_matchall classifier. We add support for two switch operations: port_add_mirror and port_del_mirror() which configure, on a per-port basis the mirror parameters requested from the cls_matchall classifier. Code is largely borrowed from the Mellanox Spectrum switch driver. Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 20:41:40 +00:00
net: rename flow_action_hw_stats_types* -> flow_action_hw_stats* flow_action_hw_stats_types_check() helper takes one of the FLOW_ACTION_HW_STATS_*_BIT values as input. If we align the arguments to the opening bracket of the helper there is no way to call this helper and stay under 80 characters. Remove the "types" part from the new flow_action helpers and enum values. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17 01:42:11 +00:00
if (!flow_action_basic_hw_stats_check(&cls->rule->action,
cls->common.extack))
net: dsa: add port policers The approach taken to pass the port policer methods on to drivers is pragmatic. It is similar to the port mirroring implementation (in that the DSA core does all of the filter block interaction and only passes simple operations for the driver to implement) and dissimilar to how flow-based policers are going to be implemented (where the driver has full control over the flow_cls_offload data structure). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-29 11:51:59 +00:00
return -EOPNOTSUPP;
flow_offload: check for basic action hw stats type Introduce flow_action_basic_hw_stats_types_check() helper and use it in drivers. That sanitizes the drivers which do not have support for action HW stats types. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-07 11:40:13 +00:00
net/dsa: use intermediate representation for matchall offload Updates dsa hardware switch handling infrastructure to use the newer intermediate representation for flow actions in matchall offloads. Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04 11:46:19 +00:00
act = &cls->rule->action.entries[0];
net: dsa: Add plumbing for port mirroring Add necessary plumbing at the slave network device level to have switch drivers implement ndo_setup_tc() and most particularly the cls_matchall classifier. We add support for two switch operations: port_add_mirror and port_del_mirror() which configure, on a per-port basis the mirror parameters requested from the cls_matchall classifier. Code is largely borrowed from the Mellanox Spectrum switch driver. Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 20:41:40 +00:00
net: dsa: remove duplicate assignment in dsa_slave_add_cls_matchall_mirred This was caused by a poor merge conflict resolution on my side. The "act = &cls->rule->action.entries[0];" assignment was already present in the code prior to the patch mentioned below. Fixes: e13c2075280e ("net: dsa: refactor matchall mirred action to separate function") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-04 19:58:56 +00:00
if (!act->dev)
return -EINVAL;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
if (!dsa_user_dev_check(act->dev))
net: dsa: refactor matchall mirred action to separate function Make room for other actions for the matchall filter by keeping the mirred argument parsing self-contained in its own function. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-29 11:51:58 +00:00
return -EOPNOTSUPP;
net: dsa: Add plumbing for port mirroring Add necessary plumbing at the slave network device level to have switch drivers implement ndo_setup_tc() and most particularly the cls_matchall classifier. We add support for two switch operations: port_add_mirror and port_del_mirror() which configure, on a per-port basis the mirror parameters requested from the cls_matchall classifier. Code is largely borrowed from the Mellanox Spectrum switch driver. Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 20:41:40 +00:00
net: dsa: refactor matchall mirred action to separate function Make room for other actions for the matchall filter by keeping the mirred argument parsing self-contained in its own function. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-29 11:51:58 +00:00
mall_tc_entry = kzalloc(sizeof(*mall_tc_entry), GFP_KERNEL);
if (!mall_tc_entry)
return -ENOMEM;
net: dsa: Add plumbing for port mirroring Add necessary plumbing at the slave network device level to have switch drivers implement ndo_setup_tc() and most particularly the cls_matchall classifier. We add support for two switch operations: port_add_mirror and port_del_mirror() which configure, on a per-port basis the mirror parameters requested from the cls_matchall classifier. Code is largely borrowed from the Mellanox Spectrum switch driver. Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 20:41:40 +00:00
net: dsa: refactor matchall mirred action to separate function Make room for other actions for the matchall filter by keeping the mirred argument parsing self-contained in its own function. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-29 11:51:58 +00:00
mall_tc_entry->cookie = cls->cookie;
mall_tc_entry->type = DSA_PORT_MALL_MIRROR;
mirror = &mall_tc_entry->mirror;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
to_dp = dsa_user_to_port(act->dev);
net: dsa: Add plumbing for port mirroring Add necessary plumbing at the slave network device level to have switch drivers implement ndo_setup_tc() and most particularly the cls_matchall classifier. We add support for two switch operations: port_add_mirror and port_del_mirror() which configure, on a per-port basis the mirror parameters requested from the cls_matchall classifier. Code is largely borrowed from the Mellanox Spectrum switch driver. Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 20:41:40 +00:00
net: dsa: refactor matchall mirred action to separate function Make room for other actions for the matchall filter by keeping the mirred argument parsing self-contained in its own function. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-29 11:51:58 +00:00
mirror->to_local_port = to_dp->index;
mirror->ingress = ingress;
net: dsa: Add plumbing for port mirroring Add necessary plumbing at the slave network device level to have switch drivers implement ndo_setup_tc() and most particularly the cls_matchall classifier. We add support for two switch operations: port_add_mirror and port_del_mirror() which configure, on a per-port basis the mirror parameters requested from the cls_matchall classifier. Code is largely borrowed from the Mellanox Spectrum switch driver. Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 20:41:40 +00:00
net: dsa: pass extack to dsa_switch_ops :: port_mirror_add() Drivers might have error messages to propagate to user space, most common being that they support a single mirror port. Propagate the netlink extack so that they can inform user space in a verbal way of their limitations. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-16 20:41:43 +00:00
err = ds->ops->port_mirror_add(ds, dp->index, mirror, ingress, extack);
net: dsa: refactor matchall mirred action to separate function Make room for other actions for the matchall filter by keeping the mirred argument parsing self-contained in its own function. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-29 11:51:58 +00:00
if (err) {
kfree(mall_tc_entry);
return err;
}
net: dsa: Add plumbing for port mirroring Add necessary plumbing at the slave network device level to have switch drivers implement ndo_setup_tc() and most particularly the cls_matchall classifier. We add support for two switch operations: port_add_mirror and port_del_mirror() which configure, on a per-port basis the mirror parameters requested from the cls_matchall classifier. Code is largely borrowed from the Mellanox Spectrum switch driver. Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 20:41:40 +00:00
net: dsa: refactor matchall mirred action to separate function Make room for other actions for the matchall filter by keeping the mirred argument parsing self-contained in its own function. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-29 11:51:58 +00:00
list_add_tail(&mall_tc_entry->list, &p->mall_tc_list);
net: dsa: Add plumbing for port mirroring Add necessary plumbing at the slave network device level to have switch drivers implement ndo_setup_tc() and most particularly the cls_matchall classifier. We add support for two switch operations: port_add_mirror and port_del_mirror() which configure, on a per-port basis the mirror parameters requested from the cls_matchall classifier. Code is largely borrowed from the Mellanox Spectrum switch driver. Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 20:41:40 +00:00
net: dsa: refactor matchall mirred action to separate function Make room for other actions for the matchall filter by keeping the mirred argument parsing self-contained in its own function. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-29 11:51:58 +00:00
return err;
}
net: dsa: Add plumbing for port mirroring Add necessary plumbing at the slave network device level to have switch drivers implement ndo_setup_tc() and most particularly the cls_matchall classifier. We add support for two switch operations: port_add_mirror and port_del_mirror() which configure, on a per-port basis the mirror parameters requested from the cls_matchall classifier. Code is largely borrowed from the Mellanox Spectrum switch driver. Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 20:41:40 +00:00
net: dsa: add port policers The approach taken to pass the port policer methods on to drivers is pragmatic. It is similar to the port mirroring implementation (in that the DSA core does all of the filter block interaction and only passes simple operations for the driver to implement) and dissimilar to how flow-based policers are going to be implemented (where the driver has full control over the flow_cls_offload data structure). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-29 11:51:59 +00:00
static int
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dsa_user_add_cls_matchall_police(struct net_device *dev,
struct tc_cls_matchall_offload *cls,
bool ingress)
net: dsa: add port policers The approach taken to pass the port policer methods on to drivers is pragmatic. It is similar to the port mirroring implementation (in that the DSA core does all of the filter block interaction and only passes simple operations for the driver to implement) and dissimilar to how flow-based policers are going to be implemented (where the driver has full control over the flow_cls_offload data structure). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-29 11:51:59 +00:00
{
struct netlink_ext_ack *extack = cls->common.extack;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
struct dsa_user_priv *p = netdev_priv(dev);
net: dsa: add port policers The approach taken to pass the port policer methods on to drivers is pragmatic. It is similar to the port mirroring implementation (in that the DSA core does all of the filter block interaction and only passes simple operations for the driver to implement) and dissimilar to how flow-based policers are going to be implemented (where the driver has full control over the flow_cls_offload data structure). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-29 11:51:59 +00:00
struct dsa_mall_policer_tc_entry *policer;
struct dsa_mall_tc_entry *mall_tc_entry;
struct dsa_switch *ds = dp->ds;
struct flow_action_entry *act;
int err;
if (!ds->ops->port_policer_add) {
NL_SET_ERR_MSG_MOD(extack,
net: remove newlines in NL_SET_ERR_MSG_MOD The NL_SET_ERR_MSG_MOD macro is used to report a string describing an error message to userspace via the netlink extended ACK structure. It should not have a trailing newline. Add a cocci script which catches cases where the newline marker is present. Using this script, fix the handful of cases which accidentally included a trailing new line. I couldn't figure out a way to get a patch mode working, so this script only implements context, report, and org. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Andy Whitcroft <apw@canonical.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-07 00:58:27 +00:00
"Policing offload not implemented");
net: dsa: add port policers The approach taken to pass the port policer methods on to drivers is pragmatic. It is similar to the port mirroring implementation (in that the DSA core does all of the filter block interaction and only passes simple operations for the driver to implement) and dissimilar to how flow-based policers are going to be implemented (where the driver has full control over the flow_cls_offload data structure). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-29 11:51:59 +00:00
return -EOPNOTSUPP;
}
if (!ingress) {
NL_SET_ERR_MSG_MOD(extack,
net: remove newlines in NL_SET_ERR_MSG_MOD The NL_SET_ERR_MSG_MOD macro is used to report a string describing an error message to userspace via the netlink extended ACK structure. It should not have a trailing newline. Add a cocci script which catches cases where the newline marker is present. Using this script, fix the handful of cases which accidentally included a trailing new line. I couldn't figure out a way to get a patch mode working, so this script only implements context, report, and org. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Andy Whitcroft <apw@canonical.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-07 00:58:27 +00:00
"Only supported on ingress qdisc");
net: dsa: add port policers The approach taken to pass the port policer methods on to drivers is pragmatic. It is similar to the port mirroring implementation (in that the DSA core does all of the filter block interaction and only passes simple operations for the driver to implement) and dissimilar to how flow-based policers are going to be implemented (where the driver has full control over the flow_cls_offload data structure). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-29 11:51:59 +00:00
return -EOPNOTSUPP;
}
if (!flow_action_basic_hw_stats_check(&cls->rule->action,
cls->common.extack))
return -EOPNOTSUPP;
list_for_each_entry(mall_tc_entry, &p->mall_tc_list, list) {
if (mall_tc_entry->type == DSA_PORT_MALL_POLICER) {
NL_SET_ERR_MSG_MOD(extack,
net: remove newlines in NL_SET_ERR_MSG_MOD The NL_SET_ERR_MSG_MOD macro is used to report a string describing an error message to userspace via the netlink extended ACK structure. It should not have a trailing newline. Add a cocci script which catches cases where the newline marker is present. Using this script, fix the handful of cases which accidentally included a trailing new line. I couldn't figure out a way to get a patch mode working, so this script only implements context, report, and org. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Andy Whitcroft <apw@canonical.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-07 00:58:27 +00:00
"Only one port policer allowed");
net: dsa: add port policers The approach taken to pass the port policer methods on to drivers is pragmatic. It is similar to the port mirroring implementation (in that the DSA core does all of the filter block interaction and only passes simple operations for the driver to implement) and dissimilar to how flow-based policers are going to be implemented (where the driver has full control over the flow_cls_offload data structure). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-29 11:51:59 +00:00
return -EEXIST;
}
}
act = &cls->rule->action.entries[0];
mall_tc_entry = kzalloc(sizeof(*mall_tc_entry), GFP_KERNEL);
if (!mall_tc_entry)
return -ENOMEM;
mall_tc_entry->cookie = cls->cookie;
mall_tc_entry->type = DSA_PORT_MALL_POLICER;
policer = &mall_tc_entry->policer;
policer->rate_bytes_per_sec = act->police.rate_bytes_ps;
policer->burst = act->police.burst;
err = ds->ops->port_policer_add(ds, dp->index, policer);
if (err) {
kfree(mall_tc_entry);
return err;
}
list_add_tail(&mall_tc_entry->list, &p->mall_tc_list);
return err;
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_add_cls_matchall(struct net_device *dev,
struct tc_cls_matchall_offload *cls,
bool ingress)
net: dsa: refactor matchall mirred action to separate function Make room for other actions for the matchall filter by keeping the mirred argument parsing self-contained in its own function. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-29 11:51:58 +00:00
{
int err = -EOPNOTSUPP;
net: dsa: Add plumbing for port mirroring Add necessary plumbing at the slave network device level to have switch drivers implement ndo_setup_tc() and most particularly the cls_matchall classifier. We add support for two switch operations: port_add_mirror and port_del_mirror() which configure, on a per-port basis the mirror parameters requested from the cls_matchall classifier. Code is largely borrowed from the Mellanox Spectrum switch driver. Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 20:41:40 +00:00
net: dsa: refactor matchall mirred action to separate function Make room for other actions for the matchall filter by keeping the mirred argument parsing self-contained in its own function. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-29 11:51:58 +00:00
if (cls->common.protocol == htons(ETH_P_ALL) &&
flow_offload_has_one_action(&cls->rule->action) &&
cls->rule->action.entries[0].id == FLOW_ACTION_MIRRED)
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
err = dsa_user_add_cls_matchall_mirred(dev, cls, ingress);
net: dsa: add port policers The approach taken to pass the port policer methods on to drivers is pragmatic. It is similar to the port mirroring implementation (in that the DSA core does all of the filter block interaction and only passes simple operations for the driver to implement) and dissimilar to how flow-based policers are going to be implemented (where the driver has full control over the flow_cls_offload data structure). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-29 11:51:59 +00:00
else if (flow_offload_has_one_action(&cls->rule->action) &&
cls->rule->action.entries[0].id == FLOW_ACTION_POLICE)
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
err = dsa_user_add_cls_matchall_police(dev, cls, ingress);
net: dsa: Add plumbing for port mirroring Add necessary plumbing at the slave network device level to have switch drivers implement ndo_setup_tc() and most particularly the cls_matchall classifier. We add support for two switch operations: port_add_mirror and port_del_mirror() which configure, on a per-port basis the mirror parameters requested from the cls_matchall classifier. Code is largely borrowed from the Mellanox Spectrum switch driver. Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 20:41:40 +00:00
net: dsa: refactor matchall mirred action to separate function Make room for other actions for the matchall filter by keeping the mirred argument parsing self-contained in its own function. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-29 11:51:58 +00:00
return err;
net: dsa: Add plumbing for port mirroring Add necessary plumbing at the slave network device level to have switch drivers implement ndo_setup_tc() and most particularly the cls_matchall classifier. We add support for two switch operations: port_add_mirror and port_del_mirror() which configure, on a per-port basis the mirror parameters requested from the cls_matchall classifier. Code is largely borrowed from the Mellanox Spectrum switch driver. Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 20:41:40 +00:00
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static void dsa_user_del_cls_matchall(struct net_device *dev,
struct tc_cls_matchall_offload *cls)
net: dsa: Add plumbing for port mirroring Add necessary plumbing at the slave network device level to have switch drivers implement ndo_setup_tc() and most particularly the cls_matchall classifier. We add support for two switch operations: port_add_mirror and port_del_mirror() which configure, on a per-port basis the mirror parameters requested from the cls_matchall classifier. Code is largely borrowed from the Mellanox Spectrum switch driver. Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 20:41:40 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: Add plumbing for port mirroring Add necessary plumbing at the slave network device level to have switch drivers implement ndo_setup_tc() and most particularly the cls_matchall classifier. We add support for two switch operations: port_add_mirror and port_del_mirror() which configure, on a per-port basis the mirror parameters requested from the cls_matchall classifier. Code is largely borrowed from the Mellanox Spectrum switch driver. Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 20:41:40 +00:00
struct dsa_mall_tc_entry *mall_tc_entry;
net: dsa: add slave to port helper Many portions of DSA core code require to get the dsa_port structure corresponding to a slave net_device. For this purpose, introduce a dsa_slave_to_port() helper. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 15:12:15 +00:00
struct dsa_switch *ds = dp->ds;
net: dsa: Add plumbing for port mirroring Add necessary plumbing at the slave network device level to have switch drivers implement ndo_setup_tc() and most particularly the cls_matchall classifier. We add support for two switch operations: port_add_mirror and port_del_mirror() which configure, on a per-port basis the mirror parameters requested from the cls_matchall classifier. Code is largely borrowed from the Mellanox Spectrum switch driver. Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 20:41:40 +00:00
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
mall_tc_entry = dsa_user_mall_tc_entry_find(dev, cls->cookie);
net: dsa: Add plumbing for port mirroring Add necessary plumbing at the slave network device level to have switch drivers implement ndo_setup_tc() and most particularly the cls_matchall classifier. We add support for two switch operations: port_add_mirror and port_del_mirror() which configure, on a per-port basis the mirror parameters requested from the cls_matchall classifier. Code is largely borrowed from the Mellanox Spectrum switch driver. Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 20:41:40 +00:00
if (!mall_tc_entry)
return;
list_del(&mall_tc_entry->list);
switch (mall_tc_entry->type) {
case DSA_PORT_MALL_MIRROR:
net: dsa: add port policers The approach taken to pass the port policer methods on to drivers is pragmatic. It is similar to the port mirroring implementation (in that the DSA core does all of the filter block interaction and only passes simple operations for the driver to implement) and dissimilar to how flow-based policers are going to be implemented (where the driver has full control over the flow_cls_offload data structure). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-29 11:51:59 +00:00
if (ds->ops->port_mirror_del)
ds->ops->port_mirror_del(ds, dp->index,
&mall_tc_entry->mirror);
break;
case DSA_PORT_MALL_POLICER:
if (ds->ops->port_policer_del)
ds->ops->port_policer_del(ds, dp->index);
net: dsa: Add plumbing for port mirroring Add necessary plumbing at the slave network device level to have switch drivers implement ndo_setup_tc() and most particularly the cls_matchall classifier. We add support for two switch operations: port_add_mirror and port_del_mirror() which configure, on a per-port basis the mirror parameters requested from the cls_matchall classifier. Code is largely borrowed from the Mellanox Spectrum switch driver. Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 20:41:40 +00:00
break;
default:
WARN_ON(1);
}
kfree(mall_tc_entry);
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_setup_tc_cls_matchall(struct net_device *dev,
struct tc_cls_matchall_offload *cls,
bool ingress)
net: dsa: Add plumbing for port mirroring Add necessary plumbing at the slave network device level to have switch drivers implement ndo_setup_tc() and most particularly the cls_matchall classifier. We add support for two switch operations: port_add_mirror and port_del_mirror() which configure, on a per-port basis the mirror parameters requested from the cls_matchall classifier. Code is largely borrowed from the Mellanox Spectrum switch driver. Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 20:41:40 +00:00
{
net: sched: push cls related args into cls_common structure As ndo_setup_tc is generic offload op for whole tc subsystem, does not really make sense to have cls-specific args. So move them under cls_common structurure which is embedded in all cls structs. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07 08:15:29 +00:00
if (cls->common.chain_index)
net: propagate tc filter chain index down the ndo_setup_tc call We need to push the chain index down to the drivers, so they have the information to which chain the rule belongs. For now, no driver supports multichain offload, so only chain 0 is supported. This is needed to prevent chain squashes during offload for now. Later this will be used to implement multichain offload. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-06 15:00:16 +00:00
return -EOPNOTSUPP;
net: dsa: Add plumbing for port mirroring Add necessary plumbing at the slave network device level to have switch drivers implement ndo_setup_tc() and most particularly the cls_matchall classifier. We add support for two switch operations: port_add_mirror and port_del_mirror() which configure, on a per-port basis the mirror parameters requested from the cls_matchall classifier. Code is largely borrowed from the Mellanox Spectrum switch driver. Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 20:41:40 +00:00
dsa: push cls_matchall setup_tc processing into a separate function Let dsa_slave_setup_tc be a splitter for specific setup_tc types and push out cls_matchall specific code into a separate function. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07 08:15:26 +00:00
switch (cls->command) {
case TC_CLSMATCHALL_REPLACE:
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
return dsa_user_add_cls_matchall(dev, cls, ingress);
dsa: push cls_matchall setup_tc processing into a separate function Let dsa_slave_setup_tc be a splitter for specific setup_tc types and push out cls_matchall specific code into a separate function. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07 08:15:26 +00:00
case TC_CLSMATCHALL_DESTROY:
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dsa_user_del_cls_matchall(dev, cls);
dsa: push cls_matchall setup_tc processing into a separate function Let dsa_slave_setup_tc be a splitter for specific setup_tc types and push out cls_matchall specific code into a separate function. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07 08:15:26 +00:00
return 0;
default:
return -EOPNOTSUPP;
}
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_add_cls_flower(struct net_device *dev,
struct flow_cls_offload *cls,
bool ingress)
net: dsa: Add bypass operations for the flower classifier-action filter Due to the immense variety of classification keys and actions available for tc-flower, as well as due to potentially very different DSA switch capabilities, it doesn't make a lot of sense for the DSA mid layer to even attempt to interpret these. So just pass them on to the underlying switch driver. DSA implements just the standard boilerplate for binding and unbinding flow blocks to ports, since nobody wants to deal with that. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-29 14:31:13 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: Add bypass operations for the flower classifier-action filter Due to the immense variety of classification keys and actions available for tc-flower, as well as due to potentially very different DSA switch capabilities, it doesn't make a lot of sense for the DSA mid layer to even attempt to interpret these. So just pass them on to the underlying switch driver. DSA implements just the standard boilerplate for binding and unbinding flow blocks to ports, since nobody wants to deal with that. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-29 14:31:13 +00:00
struct dsa_switch *ds = dp->ds;
int port = dp->index;
if (!ds->ops->cls_flower_add)
return -EOPNOTSUPP;
return ds->ops->cls_flower_add(ds, port, cls, ingress);
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_del_cls_flower(struct net_device *dev,
struct flow_cls_offload *cls,
bool ingress)
net: dsa: Add bypass operations for the flower classifier-action filter Due to the immense variety of classification keys and actions available for tc-flower, as well as due to potentially very different DSA switch capabilities, it doesn't make a lot of sense for the DSA mid layer to even attempt to interpret these. So just pass them on to the underlying switch driver. DSA implements just the standard boilerplate for binding and unbinding flow blocks to ports, since nobody wants to deal with that. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-29 14:31:13 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: Add bypass operations for the flower classifier-action filter Due to the immense variety of classification keys and actions available for tc-flower, as well as due to potentially very different DSA switch capabilities, it doesn't make a lot of sense for the DSA mid layer to even attempt to interpret these. So just pass them on to the underlying switch driver. DSA implements just the standard boilerplate for binding and unbinding flow blocks to ports, since nobody wants to deal with that. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-29 14:31:13 +00:00
struct dsa_switch *ds = dp->ds;
int port = dp->index;
if (!ds->ops->cls_flower_del)
return -EOPNOTSUPP;
return ds->ops->cls_flower_del(ds, port, cls, ingress);
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_stats_cls_flower(struct net_device *dev,
struct flow_cls_offload *cls,
bool ingress)
net: dsa: Add bypass operations for the flower classifier-action filter Due to the immense variety of classification keys and actions available for tc-flower, as well as due to potentially very different DSA switch capabilities, it doesn't make a lot of sense for the DSA mid layer to even attempt to interpret these. So just pass them on to the underlying switch driver. DSA implements just the standard boilerplate for binding and unbinding flow blocks to ports, since nobody wants to deal with that. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-29 14:31:13 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: Add bypass operations for the flower classifier-action filter Due to the immense variety of classification keys and actions available for tc-flower, as well as due to potentially very different DSA switch capabilities, it doesn't make a lot of sense for the DSA mid layer to even attempt to interpret these. So just pass them on to the underlying switch driver. DSA implements just the standard boilerplate for binding and unbinding flow blocks to ports, since nobody wants to deal with that. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-29 14:31:13 +00:00
struct dsa_switch *ds = dp->ds;
int port = dp->index;
if (!ds->ops->cls_flower_stats)
return -EOPNOTSUPP;
return ds->ops->cls_flower_stats(ds, port, cls, ingress);
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_setup_tc_cls_flower(struct net_device *dev,
struct flow_cls_offload *cls,
bool ingress)
net: dsa: Add bypass operations for the flower classifier-action filter Due to the immense variety of classification keys and actions available for tc-flower, as well as due to potentially very different DSA switch capabilities, it doesn't make a lot of sense for the DSA mid layer to even attempt to interpret these. So just pass them on to the underlying switch driver. DSA implements just the standard boilerplate for binding and unbinding flow blocks to ports, since nobody wants to deal with that. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-29 14:31:13 +00:00
{
switch (cls->command) {
case FLOW_CLS_REPLACE:
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
return dsa_user_add_cls_flower(dev, cls, ingress);
net: dsa: Add bypass operations for the flower classifier-action filter Due to the immense variety of classification keys and actions available for tc-flower, as well as due to potentially very different DSA switch capabilities, it doesn't make a lot of sense for the DSA mid layer to even attempt to interpret these. So just pass them on to the underlying switch driver. DSA implements just the standard boilerplate for binding and unbinding flow blocks to ports, since nobody wants to deal with that. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-29 14:31:13 +00:00
case FLOW_CLS_DESTROY:
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
return dsa_user_del_cls_flower(dev, cls, ingress);
net: dsa: Add bypass operations for the flower classifier-action filter Due to the immense variety of classification keys and actions available for tc-flower, as well as due to potentially very different DSA switch capabilities, it doesn't make a lot of sense for the DSA mid layer to even attempt to interpret these. So just pass them on to the underlying switch driver. DSA implements just the standard boilerplate for binding and unbinding flow blocks to ports, since nobody wants to deal with that. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-29 14:31:13 +00:00
case FLOW_CLS_STATS:
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
return dsa_user_stats_cls_flower(dev, cls, ingress);
net: dsa: Add bypass operations for the flower classifier-action filter Due to the immense variety of classification keys and actions available for tc-flower, as well as due to potentially very different DSA switch capabilities, it doesn't make a lot of sense for the DSA mid layer to even attempt to interpret these. So just pass them on to the underlying switch driver. DSA implements just the standard boilerplate for binding and unbinding flow blocks to ports, since nobody wants to deal with that. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-29 14:31:13 +00:00
default:
return -EOPNOTSUPP;
}
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_setup_tc_block_cb(enum tc_setup_type type, void *type_data,
void *cb_priv, bool ingress)
dsa: Convert ndo_setup_tc offloads to block callbacks Benefit from the newly introduced block callback infrastructure and convert ndo_setup_tc calls for matchall offloads to block callbacks. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-19 13:50:45 +00:00
{
struct net_device *dev = cb_priv;
net: sched: move the can_offload check from binding phase to rule insertion phase This restores the original behaviour before the block callbacks were introduced. Allow the drivers to do binding of block always, no matter if the NETIF_F_HW_TC feature is on or off. Move the check to the block callback which is called for rule insertion. Reported-by: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01 10:47:39 +00:00
if (!tc_can_offload(dev))
return -EOPNOTSUPP;
dsa: Convert ndo_setup_tc offloads to block callbacks Benefit from the newly introduced block callback infrastructure and convert ndo_setup_tc calls for matchall offloads to block callbacks. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-19 13:50:45 +00:00
switch (type) {
case TC_SETUP_CLSMATCHALL:
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
return dsa_user_setup_tc_cls_matchall(dev, type_data, ingress);
net: dsa: Add bypass operations for the flower classifier-action filter Due to the immense variety of classification keys and actions available for tc-flower, as well as due to potentially very different DSA switch capabilities, it doesn't make a lot of sense for the DSA mid layer to even attempt to interpret these. So just pass them on to the underlying switch driver. DSA implements just the standard boilerplate for binding and unbinding flow blocks to ports, since nobody wants to deal with that. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-29 14:31:13 +00:00
case TC_SETUP_CLSFLOWER:
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
return dsa_user_setup_tc_cls_flower(dev, type_data, ingress);
dsa: Convert ndo_setup_tc offloads to block callbacks Benefit from the newly introduced block callback infrastructure and convert ndo_setup_tc calls for matchall offloads to block callbacks. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-19 13:50:45 +00:00
default:
return -EOPNOTSUPP;
}
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_setup_tc_block_cb_ig(enum tc_setup_type type,
void *type_data, void *cb_priv)
dsa: Convert ndo_setup_tc offloads to block callbacks Benefit from the newly introduced block callback infrastructure and convert ndo_setup_tc calls for matchall offloads to block callbacks. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-19 13:50:45 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
return dsa_user_setup_tc_block_cb(type, type_data, cb_priv, true);
dsa: Convert ndo_setup_tc offloads to block callbacks Benefit from the newly introduced block callback infrastructure and convert ndo_setup_tc calls for matchall offloads to block callbacks. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-19 13:50:45 +00:00
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_setup_tc_block_cb_eg(enum tc_setup_type type,
void *type_data, void *cb_priv)
dsa: Convert ndo_setup_tc offloads to block callbacks Benefit from the newly introduced block callback infrastructure and convert ndo_setup_tc calls for matchall offloads to block callbacks. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-19 13:50:45 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
return dsa_user_setup_tc_block_cb(type, type_data, cb_priv, false);
dsa: Convert ndo_setup_tc offloads to block callbacks Benefit from the newly introduced block callback infrastructure and convert ndo_setup_tc calls for matchall offloads to block callbacks. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-19 13:50:45 +00:00
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static LIST_HEAD(dsa_user_block_cb_list);
drivers: net: use flow block API This patch updates flow_block_cb_setup_simple() to use the flow block API. Several drivers are also adjusted to use it. This patch introduces the per-driver list of flow blocks to account for blocks that are already in use. Remove tc_block_offload alias. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 20:55:46 +00:00
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_setup_tc_block(struct net_device *dev,
struct flow_block_offload *f)
dsa: Convert ndo_setup_tc offloads to block callbacks Benefit from the newly introduced block callback infrastructure and convert ndo_setup_tc calls for matchall offloads to block callbacks. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-19 13:50:45 +00:00
{
drivers: net: use flow block API This patch updates flow_block_cb_setup_simple() to use the flow block API. Several drivers are also adjusted to use it. This patch introduces the per-driver list of flow blocks to account for blocks that are already in use. Remove tc_block_offload alias. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 20:55:46 +00:00
struct flow_block_cb *block_cb;
net: flow_offload: rename tc_setup_cb_t to flow_setup_cb_t Rename this type definition and adapt users. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-19 16:20:15 +00:00
flow_setup_cb_t *cb;
dsa: Convert ndo_setup_tc offloads to block callbacks Benefit from the newly introduced block callback infrastructure and convert ndo_setup_tc calls for matchall offloads to block callbacks. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-19 13:50:45 +00:00
net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_* Rename from TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_* and remove temporary tcf_block_binder_type alias. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 20:55:41 +00:00
if (f->binder_type == FLOW_BLOCK_BINDER_TYPE_CLSACT_INGRESS)
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
cb = dsa_user_setup_tc_block_cb_ig;
net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_* Rename from TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_* and remove temporary tcf_block_binder_type alias. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 20:55:41 +00:00
else if (f->binder_type == FLOW_BLOCK_BINDER_TYPE_CLSACT_EGRESS)
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
cb = dsa_user_setup_tc_block_cb_eg;
dsa: Convert ndo_setup_tc offloads to block callbacks Benefit from the newly introduced block callback infrastructure and convert ndo_setup_tc calls for matchall offloads to block callbacks. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-19 13:50:45 +00:00
else
return -EOPNOTSUPP;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
f->driver_block_list = &dsa_user_block_cb_list;
drivers: net: use flow block API This patch updates flow_block_cb_setup_simple() to use the flow block API. Several drivers are also adjusted to use it. This patch introduces the per-driver list of flow blocks to account for blocks that are already in use. Remove tc_block_offload alias. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 20:55:46 +00:00
dsa: Convert ndo_setup_tc offloads to block callbacks Benefit from the newly introduced block callback infrastructure and convert ndo_setup_tc calls for matchall offloads to block callbacks. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-19 13:50:45 +00:00
switch (f->command) {
net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND Rename from TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND and remove temporary tc_block_command alias. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 20:55:40 +00:00
case FLOW_BLOCK_BIND:
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
if (flow_block_cb_is_busy(cb, dev, &dsa_user_block_cb_list))
net: flow_offload: add flow_block_cb_is_busy() and use it This patch adds a function to check if flow block callback is already in use. Call this new function from flow_block_cb_setup_simple() and from drivers. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 20:55:48 +00:00
return -EBUSY;
net: flow_offload: remove netns parameter from flow_block_cb_alloc() No need to annotate the netns on the flow block callback object, flow_block_cb_is_busy() already checks for used blocks. Fixes: d63db30c8537 ("net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free()") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-19 16:20:14 +00:00
block_cb = flow_block_cb_alloc(cb, dev, dev, NULL);
drivers: net: use flow block API This patch updates flow_block_cb_setup_simple() to use the flow block API. Several drivers are also adjusted to use it. This patch introduces the per-driver list of flow blocks to account for blocks that are already in use. Remove tc_block_offload alias. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 20:55:46 +00:00
if (IS_ERR(block_cb))
return PTR_ERR(block_cb);
flow_block_cb_add(block_cb, f);
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
list_add_tail(&block_cb->driver_list, &dsa_user_block_cb_list);
drivers: net: use flow block API This patch updates flow_block_cb_setup_simple() to use the flow block API. Several drivers are also adjusted to use it. This patch introduces the per-driver list of flow blocks to account for blocks that are already in use. Remove tc_block_offload alias. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 20:55:46 +00:00
return 0;
net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND Rename from TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND and remove temporary tc_block_command alias. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 20:55:40 +00:00
case FLOW_BLOCK_UNBIND:
net: flow_offload: add flow_block structure and use it This object stores the flow block callbacks that are attached to this block. Update flow_block_cb_lookup() to take this new object. This patch restores the block sharing feature. Fixes: da3eeb904ff4 ("net: flow_offload: add list handling functions") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-19 16:20:16 +00:00
block_cb = flow_block_cb_lookup(f->block, cb, dev);
drivers: net: use flow block API This patch updates flow_block_cb_setup_simple() to use the flow block API. Several drivers are also adjusted to use it. This patch introduces the per-driver list of flow blocks to account for blocks that are already in use. Remove tc_block_offload alias. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 20:55:46 +00:00
if (!block_cb)
return -ENOENT;
flow_block_cb_remove(block_cb, f);
list_del(&block_cb->driver_list);
dsa: Convert ndo_setup_tc offloads to block callbacks Benefit from the newly introduced block callback infrastructure and convert ndo_setup_tc calls for matchall offloads to block callbacks. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-19 13:50:45 +00:00
return 0;
default:
return -EOPNOTSUPP;
}
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_setup_ft_block(struct dsa_switch *ds, int port,
void *type_data)
dsa: slave: add support for TC_SETUP_FT The dsa infrastructure provides a well-defined hierarchy of devices, pass up the call to set up the flow block to the master device. From the software dataplane, the netfilter infrastructure uses the dsa slave devices to refer to the input and output device for the given skbuff. Similarly, the flowtable definition in the ruleset refers to the dsa slave port devices. This patch adds the glue code to call ndo_setup_tc with TC_SETUP_FT with the master device via the dsa slave devices. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-24 01:30:51 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct net_device *conduit = dsa_port_to_conduit(dsa_to_port(ds, port));
dsa: slave: add support for TC_SETUP_FT The dsa infrastructure provides a well-defined hierarchy of devices, pass up the call to set up the flow block to the master device. From the software dataplane, the netfilter infrastructure uses the dsa slave devices to refer to the input and output device for the given skbuff. Similarly, the flowtable definition in the ruleset refers to the dsa slave port devices. This patch adds the glue code to call ndo_setup_tc with TC_SETUP_FT with the master device via the dsa slave devices. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-24 01:30:51 +00:00
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
if (!conduit->netdev_ops->ndo_setup_tc)
dsa: slave: add support for TC_SETUP_FT The dsa infrastructure provides a well-defined hierarchy of devices, pass up the call to set up the flow block to the master device. From the software dataplane, the netfilter infrastructure uses the dsa slave devices to refer to the input and output device for the given skbuff. Similarly, the flowtable definition in the ruleset refers to the dsa slave port devices. This patch adds the glue code to call ndo_setup_tc with TC_SETUP_FT with the master device via the dsa slave devices. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-24 01:30:51 +00:00
return -EOPNOTSUPP;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
return conduit->netdev_ops->ndo_setup_tc(conduit, TC_SETUP_FT, type_data);
dsa: slave: add support for TC_SETUP_FT The dsa infrastructure provides a well-defined hierarchy of devices, pass up the call to set up the flow block to the master device. From the software dataplane, the netfilter infrastructure uses the dsa slave devices to refer to the input and output device for the given skbuff. Similarly, the flowtable definition in the ruleset refers to the dsa slave port devices. This patch adds the glue code to call ndo_setup_tc with TC_SETUP_FT with the master device via the dsa slave devices. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-24 01:30:51 +00:00
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_setup_tc(struct net_device *dev, enum tc_setup_type type,
void *type_data)
dsa: push cls_matchall setup_tc processing into a separate function Let dsa_slave_setup_tc be a splitter for specific setup_tc types and push out cls_matchall specific code into a separate function. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07 08:15:26 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: Pass ndo_setup_tc slave callback to drivers DSA currently handles shared block filters (for the classifier-action qdisc) in the core due to what I believe are simply pragmatic reasons - hiding the complexity from drivers and offerring a simple API for port mirroring. Extend the dsa_slave_setup_tc function by passing all other qdisc offloads to the driver layer, where the driver may choose what it implements and how. DSA is simply a pass-through in this case. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 01:59:59 +00:00
struct dsa_switch *ds = dp->ds;
dsa: slave: add support for TC_SETUP_FT The dsa infrastructure provides a well-defined hierarchy of devices, pass up the call to set up the flow block to the master device. From the software dataplane, the netfilter infrastructure uses the dsa slave devices to refer to the input and output device for the given skbuff. Similarly, the flowtable definition in the ruleset refers to the dsa slave port devices. This patch adds the glue code to call ndo_setup_tc with TC_SETUP_FT with the master device via the dsa slave devices. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-24 01:30:51 +00:00
switch (type) {
case TC_SETUP_BLOCK:
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
return dsa_user_setup_tc_block(dev, type_data);
dsa: slave: add support for TC_SETUP_FT The dsa infrastructure provides a well-defined hierarchy of devices, pass up the call to set up the flow block to the master device. From the software dataplane, the netfilter infrastructure uses the dsa slave devices to refer to the input and output device for the given skbuff. Similarly, the flowtable definition in the ruleset refers to the dsa slave port devices. This patch adds the glue code to call ndo_setup_tc with TC_SETUP_FT with the master device via the dsa slave devices. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-24 01:30:51 +00:00
case TC_SETUP_FT:
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
return dsa_user_setup_ft_block(ds, dp->index, type_data);
dsa: slave: add support for TC_SETUP_FT The dsa infrastructure provides a well-defined hierarchy of devices, pass up the call to set up the flow block to the master device. From the software dataplane, the netfilter infrastructure uses the dsa slave devices to refer to the input and output device for the given skbuff. Similarly, the flowtable definition in the ruleset refers to the dsa slave port devices. This patch adds the glue code to call ndo_setup_tc with TC_SETUP_FT with the master device via the dsa slave devices. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-24 01:30:51 +00:00
default:
break;
}
net: dsa: Pass ndo_setup_tc slave callback to drivers DSA currently handles shared block filters (for the classifier-action qdisc) in the core due to what I believe are simply pragmatic reasons - hiding the complexity from drivers and offerring a simple API for port mirroring. Extend the dsa_slave_setup_tc function by passing all other qdisc offloads to the driver layer, where the driver may choose what it implements and how. DSA is simply a pass-through in this case. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 01:59:59 +00:00
if (!ds->ops->port_setup_tc)
net: propagate tc filter chain index down the ndo_setup_tc call We need to push the chain index down to the drivers, so they have the information to which chain the rule belongs. For now, no driver supports multichain offload, so only chain 0 is supported. This is needed to prevent chain squashes during offload for now. Later this will be used to implement multichain offload. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-06 15:00:16 +00:00
return -EOPNOTSUPP;
net: dsa: Pass ndo_setup_tc slave callback to drivers DSA currently handles shared block filters (for the classifier-action qdisc) in the core due to what I believe are simply pragmatic reasons - hiding the complexity from drivers and offerring a simple API for port mirroring. Extend the dsa_slave_setup_tc function by passing all other qdisc offloads to the driver layer, where the driver may choose what it implements and how. DSA is simply a pass-through in this case. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 01:59:59 +00:00
return ds->ops->port_setup_tc(ds, dp->index, type, type_data);
net: dsa: Add plumbing for port mirroring Add necessary plumbing at the slave network device level to have switch drivers implement ndo_setup_tc() and most particularly the cls_matchall classifier. We add support for two switch operations: port_add_mirror and port_del_mirror() which configure, on a per-port basis the mirror parameters requested from the cls_matchall classifier. Code is largely borrowed from the Mellanox Spectrum switch driver. Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 20:41:40 +00:00
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_get_rxnfc(struct net_device *dev,
struct ethtool_rxnfc *nfc, u32 *rule_locs)
net: dsa: Hook {get,set}_rxnfc ethtool operations In preparation for adding support for CFP/TCAMP in the bcm_sf2 driver add the plumbing to call into driver specific {get,set}_rxnfc operations. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 17:48:40 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: add slave to port helper Many portions of DSA core code require to get the dsa_port structure corresponding to a slave net_device. For this purpose, introduce a dsa_slave_to_port() helper. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 15:12:15 +00:00
struct dsa_switch *ds = dp->ds;
net: dsa: Hook {get,set}_rxnfc ethtool operations In preparation for adding support for CFP/TCAMP in the bcm_sf2 driver add the plumbing to call into driver specific {get,set}_rxnfc operations. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 17:48:40 +00:00
if (!ds->ops->get_rxnfc)
return -EOPNOTSUPP;
net: dsa: add slave to port helper Many portions of DSA core code require to get the dsa_port structure corresponding to a slave net_device. For this purpose, introduce a dsa_slave_to_port() helper. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 15:12:15 +00:00
return ds->ops->get_rxnfc(ds, dp->index, nfc, rule_locs);
net: dsa: Hook {get,set}_rxnfc ethtool operations In preparation for adding support for CFP/TCAMP in the bcm_sf2 driver add the plumbing to call into driver specific {get,set}_rxnfc operations. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 17:48:40 +00:00
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_set_rxnfc(struct net_device *dev,
struct ethtool_rxnfc *nfc)
net: dsa: Hook {get,set}_rxnfc ethtool operations In preparation for adding support for CFP/TCAMP in the bcm_sf2 driver add the plumbing to call into driver specific {get,set}_rxnfc operations. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 17:48:40 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: add slave to port helper Many portions of DSA core code require to get the dsa_port structure corresponding to a slave net_device. For this purpose, introduce a dsa_slave_to_port() helper. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 15:12:15 +00:00
struct dsa_switch *ds = dp->ds;
net: dsa: Hook {get,set}_rxnfc ethtool operations In preparation for adding support for CFP/TCAMP in the bcm_sf2 driver add the plumbing to call into driver specific {get,set}_rxnfc operations. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 17:48:40 +00:00
if (!ds->ops->set_rxnfc)
return -EOPNOTSUPP;
net: dsa: add slave to port helper Many portions of DSA core code require to get the dsa_port structure corresponding to a slave net_device. For this purpose, introduce a dsa_slave_to_port() helper. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 15:12:15 +00:00
return ds->ops->set_rxnfc(ds, dp->index, nfc);
net: dsa: Hook {get,set}_rxnfc ethtool operations In preparation for adding support for CFP/TCAMP in the bcm_sf2 driver add the plumbing to call into driver specific {get,set}_rxnfc operations. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 17:48:40 +00:00
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_get_ts_info(struct net_device *dev,
struct ethtool_ts_info *ts)
net: dsa: forward hardware timestamping ioctls to switch driver This patch adds support to the dsa slave network device so that switch drivers can implement the SIOC[GS]HWTSTAMP ioctls and the ethtool timestamp-info interface. Signed-off-by: Brandon Streiff <brandon.streiff@ni.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-14 00:07:48 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_user_priv *p = netdev_priv(dev);
net: dsa: forward hardware timestamping ioctls to switch driver This patch adds support to the dsa slave network device so that switch drivers can implement the SIOC[GS]HWTSTAMP ioctls and the ethtool timestamp-info interface. Signed-off-by: Brandon Streiff <brandon.streiff@ni.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-14 00:07:48 +00:00
struct dsa_switch *ds = p->dp->ds;
if (!ds->ops->get_ts_info)
return -EOPNOTSUPP;
return ds->ops->get_ts_info(ds, p->dp->index, ts);
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_vlan_rx_add_vid(struct net_device *dev, __be16 proto,
u16 vid)
net: dsa: Add ndo_vlan_rx_{add, kill}_vid implementation In order to properly support VLAN filtering being enabled/disabled on a bridge, while having other ports being non bridge port members, we need to support the ndo_vlan_rx_{add,kill}_vid callbacks in order to make sure the non-bridge ports can continue receiving VLAN tags, even when the switch is globally configured to do ingress/egress VID checking. Since we can call dsa_port_vlan_{add,del} with a bridge_dev pointer NULL, we now need to check that in these two functions. We specifically deal with two possibly problematic cases: - creating a bridge VLAN entry while there is an existing VLAN device claiming that same VID - creating a VLAN device while there is an existing bridge VLAN entry with that VID Those are both resolved with returning -EBUSY back to user-space. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-20 22:35:39 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
Revert "net: dsa: Add more convenient functions for installing port VLANs" This reverts commit 314f76d7a68bab0516aa52877944e6aacfa0fc3f. Citing that commit message, the call graph was: dsa_slave_vlan_rx_add_vid dsa_port_setup_8021q_tagging | | | | | +-------------+ | | v v dsa_port_vid_add dsa_slave_port_obj_add | | +-------+ +-------+ | | v v dsa_port_vlan_add Now that tag_8021q has its own ops structure, it no longer relies on dsa_port_vid_add, and therefore on the dsa_switch_ops to install its VLANs. So dsa_port_vid_add now only has one single caller. So we can simplify the call graph to what it was before, aka: dsa_slave_vlan_rx_add_vid dsa_slave_port_obj_add | | +-------+ +-------+ | | v v dsa_port_vlan_add Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-10 16:48:57 +00:00
struct switchdev_obj_port_vlan vlan = {
.obj.id = SWITCHDEV_OBJ_ID_PORT_VLAN,
net: switchdev: remove vid_begin -> vid_end range from VLAN objects The call path of a switchdev VLAN addition to the bridge looks something like this today: nbp_vlan_init | __br_vlan_set_default_pvid | | | | | br_afspec | | | | | | | v | | | br_process_vlan_info | | | | | | | v | | | br_vlan_info | | | / \ / | | / \ / | | / \ / | | / \ / v v v v v nbp_vlan_add br_vlan_add ------+ | ^ ^ | | | / | | | | / / / | \ br_vlan_get_master/ / v \ ^ / / br_vlan_add_existing \ | / / | \ | / / / \ | / / / \ | / / / \ | / / / v | | v / __vlan_add / / | / / | / v | / __vlan_vid_add | / \ | / v v v br_switchdev_port_vlan_add The ranges UAPI was introduced to the bridge in commit bdced7ef7838 ("bridge: support for multiple vlans and vlan ranges in setlink and dellink requests") (Jan 10 2015). But the VLAN ranges (parsed in br_afspec) have always been passed one by one, through struct bridge_vlan_info tmp_vinfo, to br_vlan_info. So the range never went too far in depth. Then Scott Feldman introduced the switchdev_port_bridge_setlink function in commit 47f8328bb1a4 ("switchdev: add new switchdev bridge setlink"). That marked the introduction of the SWITCHDEV_OBJ_PORT_VLAN, which made full use of the range. But switchdev_port_bridge_setlink was called like this: br_setlink -> br_afspec -> switchdev_port_bridge_setlink Basically, the switchdev and the bridge code were not tightly integrated. Then commit 41c498b9359e ("bridge: restore br_setlink back to original") came, and switchdev drivers were required to implement .ndo_bridge_setlink = switchdev_port_bridge_setlink for a while. In the meantime, commits such as 0944d6b5a2fa ("bridge: try switchdev op first in __vlan_vid_add/del") finally made switchdev penetrate the br_vlan_info() barrier and start to develop the call path we have today. But remember, br_vlan_info() still receives VLANs one by one. Then Arkadi Sharshevsky refactored the switchdev API in 2017 in commit 29ab586c3d83 ("net: switchdev: Remove bridge bypass support from switchdev") so that drivers would not implement .ndo_bridge_setlink any longer. The switchdev_port_bridge_setlink also got deleted. This refactoring removed the parallel bridge_setlink implementation from switchdev, and left the only switchdev VLAN objects to be the ones offloaded from __vlan_vid_add (basically RX filtering) and __vlan_add (the latter coming from commit 9c86ce2c1ae3 ("net: bridge: Notify about bridge VLANs")). That is to say, today the switchdev VLAN object ranges are not used in the kernel. Refactoring the above call path is a bit complicated, when the bridge VLAN call path is already a bit complicated. Let's go off and finish the job of commit 29ab586c3d83 by deleting the bogus iteration through the VLAN ranges from the drivers. Some aspects of this feature never made too much sense in the first place. For example, what is a range of VLANs all having the BRIDGE_VLAN_INFO_PVID flag supposed to mean, when a port can obviously have a single pvid? This particular configuration _is_ denied as of commit 6623c60dc28e ("bridge: vlan: enforce no pvid flag in vlan ranges"), but from an API perspective, the driver still has to play pretend, and only offload the vlan->vid_end as pvid. And the addition of a switchdev VLAN object can modify the flags of another, completely unrelated, switchdev VLAN object! (a VLAN that is PVID will invalidate the PVID flag from whatever other VLAN had previously been offloaded with switchdev and had that flag. Yet switchdev never notifies about that change, drivers are supposed to guess). Nonetheless, having a VLAN range in the API makes error handling look scarier than it really is - unwinding on errors and all of that. When in reality, no one really calls this API with more than one VLAN. It is all unnecessary complexity. And despite appearing pretentious (two-phase transactional model and all), the switchdev API is really sloppy because the VLAN addition and removal operations are not paired with one another (you can add a VLAN 100 times and delete it just once). The bridge notifies through switchdev of a VLAN addition not only when the flags of an existing VLAN change, but also when nothing changes. There are switchdev drivers out there who don't like adding a VLAN that has already been added, and those checks don't really belong at driver level. But the fact that the API contains ranges is yet another factor that prevents this from being addressed in the future. Of the existing switchdev pieces of hardware, it appears that only Mellanox Spectrum supports offloading more than one VLAN at a time, through mlxsw_sp_port_vlan_set. I have kept that code internal to the driver, because there is some more bookkeeping that makes use of it, but I deleted it from the switchdev API. But since the switchdev support for ranges has already been de facto deleted by a Mellanox employee and nobody noticed for 4 years, I'm going to assume it's not a biggie. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> # switchdev and mlxsw Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> # hellcreek Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-09 00:01:46 +00:00
.vid = vid,
Revert "net: dsa: Add more convenient functions for installing port VLANs" This reverts commit 314f76d7a68bab0516aa52877944e6aacfa0fc3f. Citing that commit message, the call graph was: dsa_slave_vlan_rx_add_vid dsa_port_setup_8021q_tagging | | | | | +-------------+ | | v v dsa_port_vid_add dsa_slave_port_obj_add | | +-------+ +-------+ | | v v dsa_port_vlan_add Now that tag_8021q has its own ops structure, it no longer relies on dsa_port_vid_add, and therefore on the dsa_switch_ops to install its VLANs. So dsa_port_vid_add now only has one single caller. So we can simplify the call graph to what it was before, aka: dsa_slave_vlan_rx_add_vid dsa_slave_port_obj_add | | +-------+ +-------+ | | v v dsa_port_vlan_add Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-10 16:48:57 +00:00
/* This API only allows programming tagged, non-PVID VIDs */
.flags = 0,
};
net: dsa: propagate extack to .port_vlan_add Allow drivers to communicate their restrictions to user space directly, instead of printing to the kernel log. Where the conversion would have been lossy and things like VLAN ID could no longer be conveyed (due to the lack of support for printf format specifier in netlink extack), I chose to keep the messages in full form to the kernel log only, and leave it up to individual driver maintainers to move more messages to extack. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-13 20:43:18 +00:00
struct netlink_ext_ack extack = {0};
net: dsa: sync unicast and multicast addresses for VLAN filters too If certain conditions are met, DSA can install all necessary MAC addresses on the CPU ports as FDB entries and disable flooding towards the CPU (we call this RX filtering). There is one corner case where this does not work. ip link add br0 type bridge vlan_filtering 1 && ip link set br0 up ip link set swp0 master br0 && ip link set swp0 up ip link add link swp0 name swp0.100 type vlan id 100 ip link set swp0.100 up && ip addr add 192.168.100.1/24 dev swp0.100 Traffic through swp0.100 is broken, because the bridge turns on VLAN filtering in the swp0 port (causing RX packets to be classified to the FDB database corresponding to the VID from their 802.1Q header), and although the 8021q module does call dev_uc_add() towards the real device, that API is VLAN-unaware, so it only contains the MAC address, not the VID; and DSA's current implementation of ndo_set_rx_mode() is only for VID 0 (corresponding to FDB entries which are installed in an FDB database which is only hit when the port is VLAN-unaware). It's interesting to understand why the bridge does not turn on IFF_PROMISC for its swp0 bridge port, and it may appear at first glance that this is a regression caused by the logic in commit 2796d0c648c9 ("bridge: Automatically manage port promiscuous mode."). After all, a bridge port needs to have IFF_PROMISC by its very nature - it needs to receive and forward frames with a MAC DA different from the bridge ports' MAC addresses. While that may be true, when the bridge is VLAN-aware *and* it has a single port, there is no real reason to enable promiscuity even if that is an automatic port, with flooding and learning (there is nowhere for packets to go except to the BR_FDB_LOCAL entries), and this is how the corner case appears. Adding a second automatic interface to the bridge would make swp0 promisc as well, and would mask the corner case. Given the dev_uc_add() / ndo_set_rx_mode() API is what it is (it doesn't pass a VLAN ID), the only way to address that problem is to install host FDB entries for the cartesian product of RX filtering MAC addresses and VLAN RX filters. Fixes: 7569459a52c9 ("net: dsa: manage flooding on the CPU ports") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230329151821.745752-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-29 15:18:21 +00:00
struct dsa_switch *ds = dp->ds;
struct netdev_hw_addr *ha;
net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses When using the felix driver (the only one which supports UC filtering and MC filtering) as a DSA master for a random other DSA switch, one can see the following stack trace when the downstream switch ports join a VLAN-aware bridge: ============================= WARNING: suspicious RCU usage ----------------------------- net/8021q/vlan_core.c:238 suspicious rcu_dereference_protected() usage! stack backtrace: Workqueue: dsa_ordered dsa_slave_switchdev_event_work Call trace: lockdep_rcu_suspicious+0x170/0x210 vlan_for_each+0x8c/0x188 dsa_slave_sync_uc+0x128/0x178 __hw_addr_sync_dev+0x138/0x158 dsa_slave_set_rx_mode+0x58/0x70 __dev_set_rx_mode+0x88/0xa8 dev_uc_add+0x74/0xa0 dsa_port_bridge_host_fdb_add+0xec/0x180 dsa_slave_switchdev_event_work+0x7c/0x1c8 process_one_work+0x290/0x568 What it's saying is that vlan_for_each() expects rtnl_lock() context and it's not getting it, when it's called from the DSA master's ndo_set_rx_mode(). The caller of that - dsa_slave_set_rx_mode() - is the slave DSA interface's dsa_port_bridge_host_fdb_add() which comes from the deferred dsa_slave_switchdev_event_work(). We went to great lengths to avoid the rtnl_lock() context in that call path in commit 0faf890fc519 ("net: dsa: drop rtnl_lock from dsa_slave_switchdev_event_work"), and calling rtnl_lock() is simply not an option due to the possibility of deadlocking when calling dsa_flush_workqueue() from the call paths that do hold rtnl_lock() - basically all of them. So, when the DSA master calls vlan_for_each() from its ndo_set_rx_mode(), the state of the 8021q driver on this device is really not protected from concurrent access by anything. Looking at net/8021q/, I don't think that vlan_info->vid_list was particularly designed with RCU traversal in mind, so introducing an RCU read-side form of vlan_for_each() - vlan_for_each_rcu() - won't be so easy, and it also wouldn't be exactly what we need anyway. In general I believe that the solution isn't in net/8021q/ anyway; vlan_for_each() is not cut out for this task. DSA doesn't need rtnl_lock() to be held per se - since it's not a netdev state change that we're blocking, but rather, just concurrent additions/removals to a VLAN list. We don't even need sleepable context - the callback of vlan_for_each() just schedules deferred work. The proposed escape is to remove the dependency on vlan_for_each() and to open-code a non-sleepable, rtnl-free alternative to that, based on copies of the VLAN list modified from .ndo_vlan_rx_add_vid() and .ndo_vlan_rx_kill_vid(). Fixes: 64fdc5f341db ("net: dsa: sync unicast and multicast addresses for VLAN filters too") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20230626154402.3154454-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-26 15:44:02 +00:00
struct dsa_vlan *v;
net: dsa: Add ndo_vlan_rx_{add, kill}_vid implementation In order to properly support VLAN filtering being enabled/disabled on a bridge, while having other ports being non bridge port members, we need to support the ndo_vlan_rx_{add,kill}_vid callbacks in order to make sure the non-bridge ports can continue receiving VLAN tags, even when the switch is globally configured to do ingress/egress VID checking. Since we can call dsa_port_vlan_{add,del} with a bridge_dev pointer NULL, we now need to check that in these two functions. We specifically deal with two possibly problematic cases: - creating a bridge VLAN entry while there is an existing VLAN device claiming that same VID - creating a VLAN device while there is an existing bridge VLAN entry with that VID Those are both resolved with returning -EBUSY back to user-space. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-20 22:35:39 +00:00
int ret;
Revert "net: dsa: Add more convenient functions for installing port VLANs" This reverts commit 314f76d7a68bab0516aa52877944e6aacfa0fc3f. Citing that commit message, the call graph was: dsa_slave_vlan_rx_add_vid dsa_port_setup_8021q_tagging | | | | | +-------------+ | | v v dsa_port_vid_add dsa_slave_port_obj_add | | +-------+ +-------+ | | v v dsa_port_vlan_add Now that tag_8021q has its own ops structure, it no longer relies on dsa_port_vid_add, and therefore on the dsa_switch_ops to install its VLANs. So dsa_port_vid_add now only has one single caller. So we can simplify the call graph to what it was before, aka: dsa_slave_vlan_rx_add_vid dsa_slave_port_obj_add | | +-------+ +-------+ | | v v dsa_port_vlan_add Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-10 16:48:57 +00:00
/* User port... */
net: dsa: propagate extack to .port_vlan_add Allow drivers to communicate their restrictions to user space directly, instead of printing to the kernel log. Where the conversion would have been lossy and things like VLAN ID could no longer be conveyed (due to the lack of support for printf format specifier in netlink extack), I chose to keep the messages in full form to the kernel log only, and leave it up to individual driver maintainers to move more messages to extack. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-13 20:43:18 +00:00
ret = dsa_port_vlan_add(dp, &vlan, &extack);
if (ret) {
if (extack._msg)
netdev_err(dev, "%s\n", extack._msg);
net: dsa: do not skip -EOPNOTSUPP in dsa_port_vid_add Currently dsa_port_vid_add returns 0 if the switch returns -EOPNOTSUPP. This function is used in the tag_8021q.c code to offload the PVID of ports, which would simply not work if .port_vlan_add is not supported by the underlying switch. Do not skip -EOPNOTSUPP in dsa_port_vid_add but only when necessary, that is to say in dsa_slave_vlan_rx_add_vid. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-25 17:25:16 +00:00
return ret;
net: dsa: propagate extack to .port_vlan_add Allow drivers to communicate their restrictions to user space directly, instead of printing to the kernel log. Where the conversion would have been lossy and things like VLAN ID could no longer be conveyed (due to the lack of support for printf format specifier in netlink extack), I chose to keep the messages in full form to the kernel log only, and leave it up to individual driver maintainers to move more messages to extack. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-13 20:43:18 +00:00
}
net: dsa: do not skip -EOPNOTSUPP in dsa_port_vid_add Currently dsa_port_vid_add returns 0 if the switch returns -EOPNOTSUPP. This function is used in the tag_8021q.c code to offload the PVID of ports, which would simply not work if .port_vlan_add is not supported by the underlying switch. Do not skip -EOPNOTSUPP in dsa_port_vid_add but only when necessary, that is to say in dsa_slave_vlan_rx_add_vid. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-25 17:25:16 +00:00
Revert "net: dsa: Add more convenient functions for installing port VLANs" This reverts commit 314f76d7a68bab0516aa52877944e6aacfa0fc3f. Citing that commit message, the call graph was: dsa_slave_vlan_rx_add_vid dsa_port_setup_8021q_tagging | | | | | +-------------+ | | v v dsa_port_vid_add dsa_slave_port_obj_add | | +-------+ +-------+ | | v v dsa_port_vlan_add Now that tag_8021q has its own ops structure, it no longer relies on dsa_port_vid_add, and therefore on the dsa_switch_ops to install its VLANs. So dsa_port_vid_add now only has one single caller. So we can simplify the call graph to what it was before, aka: dsa_slave_vlan_rx_add_vid dsa_slave_port_obj_add | | +-------+ +-------+ | | v v dsa_port_vlan_add Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-10 16:48:57 +00:00
/* And CPU port... */
net: dsa: add explicit support for host bridge VLANs Currently, DSA programs VLANs on shared (DSA and CPU) ports each time it does so on user ports. This is good for basic functionality but has several limitations: - the VLAN group which must reach the CPU may be radically different from the VLAN group that must be autonomously forwarded by the switch. In other words, the admin may want to isolate noisy stations and avoid traffic from them going to the control processor of the switch, where it would just waste useless cycles. The bridge already supports independent control of VLAN groups on bridge ports and on the bridge itself, and when VLAN-aware, it will drop packets in software anyway if their VID isn't added as a 'self' entry towards the bridge device. - Replaying host FDB entries may depend, for some drivers like mv88e6xxx, on replaying the host VLANs as well. The 2 VLAN groups are approximately the same in most regular cases, but there are corner cases when timing matters, and DSA's approximation of replicating VLANs on shared ports simply does not work. - If a user makes the bridge (implicitly the CPU port) join a VLAN by accident, there is no way for the CPU port to isolate itself from that noisy VLAN except by rebooting the system. This is because for each VLAN added on a user port, DSA will add it on shared ports too, but for each VLAN deletion on a user port, it will remain installed on shared ports, since DSA has no good indication of whether the VLAN is still in use or not. Now that the bridge driver emits well-balanced SWITCHDEV_OBJ_ID_PORT_VLAN addition and removal events, DSA has a simple and straightforward task of separating the bridge port VLANs (these have an orig_dev which is a DSA slave interface, or a LAG interface) from the host VLANs (these have an orig_dev which is a bridge interface), and to keep a simple reference count of each VID on each shared port. Forwarding VLANs must be installed on the bridge ports and on all DSA ports interconnecting them. We don't have a good view of the exact topology, so we simply install forwarding VLANs on all DSA ports, which is what has been done until now. Host VLANs must be installed primarily on the dedicated CPU port of each bridge port. More subtly, they must also be installed on upstream-facing and downstream-facing DSA ports that are connecting the bridge ports and the CPU. This ensures that the mv88e6xxx's problem (VID of host FDB entry may be absent from VTU) is still addressed even if that switch is in a cross-chip setup, and it has no local CPU port. Therefore: - user ports contain only bridge port (forwarding) VLANs, and no refcounting is necessary - DSA ports contain both forwarding and host VLANs. Refcounting is necessary among these 2 types. - CPU ports contain only host VLANs. Refcounting is also necessary. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-15 17:02:17 +00:00
ret = dsa_port_host_vlan_add(dp, &vlan, &extack);
net: dsa: propagate extack to .port_vlan_add Allow drivers to communicate their restrictions to user space directly, instead of printing to the kernel log. Where the conversion would have been lossy and things like VLAN ID could no longer be conveyed (due to the lack of support for printf format specifier in netlink extack), I chose to keep the messages in full form to the kernel log only, and leave it up to individual driver maintainers to move more messages to extack. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-13 20:43:18 +00:00
if (ret) {
if (extack._msg)
netdev_err(dev, "CPU port %d: %s\n", dp->cpu_dp->index,
extack._msg);
net: dsa: program VLAN on CPU port from slave DSA currently programs a VLAN on the CPU port implicitly after the related notifier is received by a switch. While we still need to do this transparent programmation of the DSA links in the fabric, programming the CPU port this way may cause problems in some corners such as the tag_8021q driver. Because the dedicated CPU port is specific to a slave, make their programmation explicit a few layers up, in the slave code. Note that technically, DSA links have a dedicated CPU port as well, but since they are only used as conduit between interconnected switches of a fabric, programming them transparently this way is what we want. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-25 17:25:19 +00:00
return ret;
net: dsa: propagate extack to .port_vlan_add Allow drivers to communicate their restrictions to user space directly, instead of printing to the kernel log. Where the conversion would have been lossy and things like VLAN ID could no longer be conveyed (due to the lack of support for printf format specifier in netlink extack), I chose to keep the messages in full form to the kernel log only, and leave it up to individual driver maintainers to move more messages to extack. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-13 20:43:18 +00:00
}
net: dsa: program VLAN on CPU port from slave DSA currently programs a VLAN on the CPU port implicitly after the related notifier is received by a switch. While we still need to do this transparent programmation of the DSA links in the fabric, programming the CPU port this way may cause problems in some corners such as the tag_8021q driver. Because the dedicated CPU port is specific to a slave, make their programmation explicit a few layers up, in the slave code. Note that technically, DSA links have a dedicated CPU port as well, but since they are only used as conduit between interconnected switches of a fabric, programming them transparently this way is what we want. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-25 17:25:19 +00:00
net: dsa: sync unicast and multicast addresses for VLAN filters too If certain conditions are met, DSA can install all necessary MAC addresses on the CPU ports as FDB entries and disable flooding towards the CPU (we call this RX filtering). There is one corner case where this does not work. ip link add br0 type bridge vlan_filtering 1 && ip link set br0 up ip link set swp0 master br0 && ip link set swp0 up ip link add link swp0 name swp0.100 type vlan id 100 ip link set swp0.100 up && ip addr add 192.168.100.1/24 dev swp0.100 Traffic through swp0.100 is broken, because the bridge turns on VLAN filtering in the swp0 port (causing RX packets to be classified to the FDB database corresponding to the VID from their 802.1Q header), and although the 8021q module does call dev_uc_add() towards the real device, that API is VLAN-unaware, so it only contains the MAC address, not the VID; and DSA's current implementation of ndo_set_rx_mode() is only for VID 0 (corresponding to FDB entries which are installed in an FDB database which is only hit when the port is VLAN-unaware). It's interesting to understand why the bridge does not turn on IFF_PROMISC for its swp0 bridge port, and it may appear at first glance that this is a regression caused by the logic in commit 2796d0c648c9 ("bridge: Automatically manage port promiscuous mode."). After all, a bridge port needs to have IFF_PROMISC by its very nature - it needs to receive and forward frames with a MAC DA different from the bridge ports' MAC addresses. While that may be true, when the bridge is VLAN-aware *and* it has a single port, there is no real reason to enable promiscuity even if that is an automatic port, with flooding and learning (there is nowhere for packets to go except to the BR_FDB_LOCAL entries), and this is how the corner case appears. Adding a second automatic interface to the bridge would make swp0 promisc as well, and would mask the corner case. Given the dev_uc_add() / ndo_set_rx_mode() API is what it is (it doesn't pass a VLAN ID), the only way to address that problem is to install host FDB entries for the cartesian product of RX filtering MAC addresses and VLAN RX filters. Fixes: 7569459a52c9 ("net: dsa: manage flooding on the CPU ports") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230329151821.745752-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-29 15:18:21 +00:00
if (!dsa_switch_supports_uc_filtering(ds) &&
!dsa_switch_supports_mc_filtering(ds))
return 0;
net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses When using the felix driver (the only one which supports UC filtering and MC filtering) as a DSA master for a random other DSA switch, one can see the following stack trace when the downstream switch ports join a VLAN-aware bridge: ============================= WARNING: suspicious RCU usage ----------------------------- net/8021q/vlan_core.c:238 suspicious rcu_dereference_protected() usage! stack backtrace: Workqueue: dsa_ordered dsa_slave_switchdev_event_work Call trace: lockdep_rcu_suspicious+0x170/0x210 vlan_for_each+0x8c/0x188 dsa_slave_sync_uc+0x128/0x178 __hw_addr_sync_dev+0x138/0x158 dsa_slave_set_rx_mode+0x58/0x70 __dev_set_rx_mode+0x88/0xa8 dev_uc_add+0x74/0xa0 dsa_port_bridge_host_fdb_add+0xec/0x180 dsa_slave_switchdev_event_work+0x7c/0x1c8 process_one_work+0x290/0x568 What it's saying is that vlan_for_each() expects rtnl_lock() context and it's not getting it, when it's called from the DSA master's ndo_set_rx_mode(). The caller of that - dsa_slave_set_rx_mode() - is the slave DSA interface's dsa_port_bridge_host_fdb_add() which comes from the deferred dsa_slave_switchdev_event_work(). We went to great lengths to avoid the rtnl_lock() context in that call path in commit 0faf890fc519 ("net: dsa: drop rtnl_lock from dsa_slave_switchdev_event_work"), and calling rtnl_lock() is simply not an option due to the possibility of deadlocking when calling dsa_flush_workqueue() from the call paths that do hold rtnl_lock() - basically all of them. So, when the DSA master calls vlan_for_each() from its ndo_set_rx_mode(), the state of the 8021q driver on this device is really not protected from concurrent access by anything. Looking at net/8021q/, I don't think that vlan_info->vid_list was particularly designed with RCU traversal in mind, so introducing an RCU read-side form of vlan_for_each() - vlan_for_each_rcu() - won't be so easy, and it also wouldn't be exactly what we need anyway. In general I believe that the solution isn't in net/8021q/ anyway; vlan_for_each() is not cut out for this task. DSA doesn't need rtnl_lock() to be held per se - since it's not a netdev state change that we're blocking, but rather, just concurrent additions/removals to a VLAN list. We don't even need sleepable context - the callback of vlan_for_each() just schedules deferred work. The proposed escape is to remove the dependency on vlan_for_each() and to open-code a non-sleepable, rtnl-free alternative to that, based on copies of the VLAN list modified from .ndo_vlan_rx_add_vid() and .ndo_vlan_rx_kill_vid(). Fixes: 64fdc5f341db ("net: dsa: sync unicast and multicast addresses for VLAN filters too") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20230626154402.3154454-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-26 15:44:02 +00:00
v = kzalloc(sizeof(*v), GFP_KERNEL);
if (!v) {
ret = -ENOMEM;
goto rollback;
}
net: dsa: sync unicast and multicast addresses for VLAN filters too If certain conditions are met, DSA can install all necessary MAC addresses on the CPU ports as FDB entries and disable flooding towards the CPU (we call this RX filtering). There is one corner case where this does not work. ip link add br0 type bridge vlan_filtering 1 && ip link set br0 up ip link set swp0 master br0 && ip link set swp0 up ip link add link swp0 name swp0.100 type vlan id 100 ip link set swp0.100 up && ip addr add 192.168.100.1/24 dev swp0.100 Traffic through swp0.100 is broken, because the bridge turns on VLAN filtering in the swp0 port (causing RX packets to be classified to the FDB database corresponding to the VID from their 802.1Q header), and although the 8021q module does call dev_uc_add() towards the real device, that API is VLAN-unaware, so it only contains the MAC address, not the VID; and DSA's current implementation of ndo_set_rx_mode() is only for VID 0 (corresponding to FDB entries which are installed in an FDB database which is only hit when the port is VLAN-unaware). It's interesting to understand why the bridge does not turn on IFF_PROMISC for its swp0 bridge port, and it may appear at first glance that this is a regression caused by the logic in commit 2796d0c648c9 ("bridge: Automatically manage port promiscuous mode."). After all, a bridge port needs to have IFF_PROMISC by its very nature - it needs to receive and forward frames with a MAC DA different from the bridge ports' MAC addresses. While that may be true, when the bridge is VLAN-aware *and* it has a single port, there is no real reason to enable promiscuity even if that is an automatic port, with flooding and learning (there is nowhere for packets to go except to the BR_FDB_LOCAL entries), and this is how the corner case appears. Adding a second automatic interface to the bridge would make swp0 promisc as well, and would mask the corner case. Given the dev_uc_add() / ndo_set_rx_mode() API is what it is (it doesn't pass a VLAN ID), the only way to address that problem is to install host FDB entries for the cartesian product of RX filtering MAC addresses and VLAN RX filters. Fixes: 7569459a52c9 ("net: dsa: manage flooding on the CPU ports") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230329151821.745752-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-29 15:18:21 +00:00
netif_addr_lock_bh(dev);
net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses When using the felix driver (the only one which supports UC filtering and MC filtering) as a DSA master for a random other DSA switch, one can see the following stack trace when the downstream switch ports join a VLAN-aware bridge: ============================= WARNING: suspicious RCU usage ----------------------------- net/8021q/vlan_core.c:238 suspicious rcu_dereference_protected() usage! stack backtrace: Workqueue: dsa_ordered dsa_slave_switchdev_event_work Call trace: lockdep_rcu_suspicious+0x170/0x210 vlan_for_each+0x8c/0x188 dsa_slave_sync_uc+0x128/0x178 __hw_addr_sync_dev+0x138/0x158 dsa_slave_set_rx_mode+0x58/0x70 __dev_set_rx_mode+0x88/0xa8 dev_uc_add+0x74/0xa0 dsa_port_bridge_host_fdb_add+0xec/0x180 dsa_slave_switchdev_event_work+0x7c/0x1c8 process_one_work+0x290/0x568 What it's saying is that vlan_for_each() expects rtnl_lock() context and it's not getting it, when it's called from the DSA master's ndo_set_rx_mode(). The caller of that - dsa_slave_set_rx_mode() - is the slave DSA interface's dsa_port_bridge_host_fdb_add() which comes from the deferred dsa_slave_switchdev_event_work(). We went to great lengths to avoid the rtnl_lock() context in that call path in commit 0faf890fc519 ("net: dsa: drop rtnl_lock from dsa_slave_switchdev_event_work"), and calling rtnl_lock() is simply not an option due to the possibility of deadlocking when calling dsa_flush_workqueue() from the call paths that do hold rtnl_lock() - basically all of them. So, when the DSA master calls vlan_for_each() from its ndo_set_rx_mode(), the state of the 8021q driver on this device is really not protected from concurrent access by anything. Looking at net/8021q/, I don't think that vlan_info->vid_list was particularly designed with RCU traversal in mind, so introducing an RCU read-side form of vlan_for_each() - vlan_for_each_rcu() - won't be so easy, and it also wouldn't be exactly what we need anyway. In general I believe that the solution isn't in net/8021q/ anyway; vlan_for_each() is not cut out for this task. DSA doesn't need rtnl_lock() to be held per se - since it's not a netdev state change that we're blocking, but rather, just concurrent additions/removals to a VLAN list. We don't even need sleepable context - the callback of vlan_for_each() just schedules deferred work. The proposed escape is to remove the dependency on vlan_for_each() and to open-code a non-sleepable, rtnl-free alternative to that, based on copies of the VLAN list modified from .ndo_vlan_rx_add_vid() and .ndo_vlan_rx_kill_vid(). Fixes: 64fdc5f341db ("net: dsa: sync unicast and multicast addresses for VLAN filters too") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20230626154402.3154454-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-26 15:44:02 +00:00
v->vid = vid;
list_add_tail(&v->list, &dp->user_vlans);
net: dsa: sync unicast and multicast addresses for VLAN filters too If certain conditions are met, DSA can install all necessary MAC addresses on the CPU ports as FDB entries and disable flooding towards the CPU (we call this RX filtering). There is one corner case where this does not work. ip link add br0 type bridge vlan_filtering 1 && ip link set br0 up ip link set swp0 master br0 && ip link set swp0 up ip link add link swp0 name swp0.100 type vlan id 100 ip link set swp0.100 up && ip addr add 192.168.100.1/24 dev swp0.100 Traffic through swp0.100 is broken, because the bridge turns on VLAN filtering in the swp0 port (causing RX packets to be classified to the FDB database corresponding to the VID from their 802.1Q header), and although the 8021q module does call dev_uc_add() towards the real device, that API is VLAN-unaware, so it only contains the MAC address, not the VID; and DSA's current implementation of ndo_set_rx_mode() is only for VID 0 (corresponding to FDB entries which are installed in an FDB database which is only hit when the port is VLAN-unaware). It's interesting to understand why the bridge does not turn on IFF_PROMISC for its swp0 bridge port, and it may appear at first glance that this is a regression caused by the logic in commit 2796d0c648c9 ("bridge: Automatically manage port promiscuous mode."). After all, a bridge port needs to have IFF_PROMISC by its very nature - it needs to receive and forward frames with a MAC DA different from the bridge ports' MAC addresses. While that may be true, when the bridge is VLAN-aware *and* it has a single port, there is no real reason to enable promiscuity even if that is an automatic port, with flooding and learning (there is nowhere for packets to go except to the BR_FDB_LOCAL entries), and this is how the corner case appears. Adding a second automatic interface to the bridge would make swp0 promisc as well, and would mask the corner case. Given the dev_uc_add() / ndo_set_rx_mode() API is what it is (it doesn't pass a VLAN ID), the only way to address that problem is to install host FDB entries for the cartesian product of RX filtering MAC addresses and VLAN RX filters. Fixes: 7569459a52c9 ("net: dsa: manage flooding on the CPU ports") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230329151821.745752-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-29 15:18:21 +00:00
if (dsa_switch_supports_mc_filtering(ds)) {
netdev_for_each_synced_mc_addr(ha, dev) {
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dsa_user_schedule_standalone_work(dev, DSA_MC_ADD,
ha->addr, vid);
net: dsa: sync unicast and multicast addresses for VLAN filters too If certain conditions are met, DSA can install all necessary MAC addresses on the CPU ports as FDB entries and disable flooding towards the CPU (we call this RX filtering). There is one corner case where this does not work. ip link add br0 type bridge vlan_filtering 1 && ip link set br0 up ip link set swp0 master br0 && ip link set swp0 up ip link add link swp0 name swp0.100 type vlan id 100 ip link set swp0.100 up && ip addr add 192.168.100.1/24 dev swp0.100 Traffic through swp0.100 is broken, because the bridge turns on VLAN filtering in the swp0 port (causing RX packets to be classified to the FDB database corresponding to the VID from their 802.1Q header), and although the 8021q module does call dev_uc_add() towards the real device, that API is VLAN-unaware, so it only contains the MAC address, not the VID; and DSA's current implementation of ndo_set_rx_mode() is only for VID 0 (corresponding to FDB entries which are installed in an FDB database which is only hit when the port is VLAN-unaware). It's interesting to understand why the bridge does not turn on IFF_PROMISC for its swp0 bridge port, and it may appear at first glance that this is a regression caused by the logic in commit 2796d0c648c9 ("bridge: Automatically manage port promiscuous mode."). After all, a bridge port needs to have IFF_PROMISC by its very nature - it needs to receive and forward frames with a MAC DA different from the bridge ports' MAC addresses. While that may be true, when the bridge is VLAN-aware *and* it has a single port, there is no real reason to enable promiscuity even if that is an automatic port, with flooding and learning (there is nowhere for packets to go except to the BR_FDB_LOCAL entries), and this is how the corner case appears. Adding a second automatic interface to the bridge would make swp0 promisc as well, and would mask the corner case. Given the dev_uc_add() / ndo_set_rx_mode() API is what it is (it doesn't pass a VLAN ID), the only way to address that problem is to install host FDB entries for the cartesian product of RX filtering MAC addresses and VLAN RX filters. Fixes: 7569459a52c9 ("net: dsa: manage flooding on the CPU ports") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230329151821.745752-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-29 15:18:21 +00:00
}
}
if (dsa_switch_supports_uc_filtering(ds)) {
netdev_for_each_synced_uc_addr(ha, dev) {
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dsa_user_schedule_standalone_work(dev, DSA_UC_ADD,
ha->addr, vid);
net: dsa: sync unicast and multicast addresses for VLAN filters too If certain conditions are met, DSA can install all necessary MAC addresses on the CPU ports as FDB entries and disable flooding towards the CPU (we call this RX filtering). There is one corner case where this does not work. ip link add br0 type bridge vlan_filtering 1 && ip link set br0 up ip link set swp0 master br0 && ip link set swp0 up ip link add link swp0 name swp0.100 type vlan id 100 ip link set swp0.100 up && ip addr add 192.168.100.1/24 dev swp0.100 Traffic through swp0.100 is broken, because the bridge turns on VLAN filtering in the swp0 port (causing RX packets to be classified to the FDB database corresponding to the VID from their 802.1Q header), and although the 8021q module does call dev_uc_add() towards the real device, that API is VLAN-unaware, so it only contains the MAC address, not the VID; and DSA's current implementation of ndo_set_rx_mode() is only for VID 0 (corresponding to FDB entries which are installed in an FDB database which is only hit when the port is VLAN-unaware). It's interesting to understand why the bridge does not turn on IFF_PROMISC for its swp0 bridge port, and it may appear at first glance that this is a regression caused by the logic in commit 2796d0c648c9 ("bridge: Automatically manage port promiscuous mode."). After all, a bridge port needs to have IFF_PROMISC by its very nature - it needs to receive and forward frames with a MAC DA different from the bridge ports' MAC addresses. While that may be true, when the bridge is VLAN-aware *and* it has a single port, there is no real reason to enable promiscuity even if that is an automatic port, with flooding and learning (there is nowhere for packets to go except to the BR_FDB_LOCAL entries), and this is how the corner case appears. Adding a second automatic interface to the bridge would make swp0 promisc as well, and would mask the corner case. Given the dev_uc_add() / ndo_set_rx_mode() API is what it is (it doesn't pass a VLAN ID), the only way to address that problem is to install host FDB entries for the cartesian product of RX filtering MAC addresses and VLAN RX filters. Fixes: 7569459a52c9 ("net: dsa: manage flooding on the CPU ports") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230329151821.745752-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-29 15:18:21 +00:00
}
}
netif_addr_unlock_bh(dev);
dsa_flush_workqueue();
net: dsa: add explicit support for host bridge VLANs Currently, DSA programs VLANs on shared (DSA and CPU) ports each time it does so on user ports. This is good for basic functionality but has several limitations: - the VLAN group which must reach the CPU may be radically different from the VLAN group that must be autonomously forwarded by the switch. In other words, the admin may want to isolate noisy stations and avoid traffic from them going to the control processor of the switch, where it would just waste useless cycles. The bridge already supports independent control of VLAN groups on bridge ports and on the bridge itself, and when VLAN-aware, it will drop packets in software anyway if their VID isn't added as a 'self' entry towards the bridge device. - Replaying host FDB entries may depend, for some drivers like mv88e6xxx, on replaying the host VLANs as well. The 2 VLAN groups are approximately the same in most regular cases, but there are corner cases when timing matters, and DSA's approximation of replicating VLANs on shared ports simply does not work. - If a user makes the bridge (implicitly the CPU port) join a VLAN by accident, there is no way for the CPU port to isolate itself from that noisy VLAN except by rebooting the system. This is because for each VLAN added on a user port, DSA will add it on shared ports too, but for each VLAN deletion on a user port, it will remain installed on shared ports, since DSA has no good indication of whether the VLAN is still in use or not. Now that the bridge driver emits well-balanced SWITCHDEV_OBJ_ID_PORT_VLAN addition and removal events, DSA has a simple and straightforward task of separating the bridge port VLANs (these have an orig_dev which is a DSA slave interface, or a LAG interface) from the host VLANs (these have an orig_dev which is a bridge interface), and to keep a simple reference count of each VID on each shared port. Forwarding VLANs must be installed on the bridge ports and on all DSA ports interconnecting them. We don't have a good view of the exact topology, so we simply install forwarding VLANs on all DSA ports, which is what has been done until now. Host VLANs must be installed primarily on the dedicated CPU port of each bridge port. More subtly, they must also be installed on upstream-facing and downstream-facing DSA ports that are connecting the bridge ports and the CPU. This ensures that the mv88e6xxx's problem (VID of host FDB entry may be absent from VTU) is still addressed even if that switch is in a cross-chip setup, and it has no local CPU port. Therefore: - user ports contain only bridge port (forwarding) VLANs, and no refcounting is necessary - DSA ports contain both forwarding and host VLANs. Refcounting is necessary among these 2 types. - CPU ports contain only host VLANs. Refcounting is also necessary. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-15 17:02:17 +00:00
return 0;
net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses When using the felix driver (the only one which supports UC filtering and MC filtering) as a DSA master for a random other DSA switch, one can see the following stack trace when the downstream switch ports join a VLAN-aware bridge: ============================= WARNING: suspicious RCU usage ----------------------------- net/8021q/vlan_core.c:238 suspicious rcu_dereference_protected() usage! stack backtrace: Workqueue: dsa_ordered dsa_slave_switchdev_event_work Call trace: lockdep_rcu_suspicious+0x170/0x210 vlan_for_each+0x8c/0x188 dsa_slave_sync_uc+0x128/0x178 __hw_addr_sync_dev+0x138/0x158 dsa_slave_set_rx_mode+0x58/0x70 __dev_set_rx_mode+0x88/0xa8 dev_uc_add+0x74/0xa0 dsa_port_bridge_host_fdb_add+0xec/0x180 dsa_slave_switchdev_event_work+0x7c/0x1c8 process_one_work+0x290/0x568 What it's saying is that vlan_for_each() expects rtnl_lock() context and it's not getting it, when it's called from the DSA master's ndo_set_rx_mode(). The caller of that - dsa_slave_set_rx_mode() - is the slave DSA interface's dsa_port_bridge_host_fdb_add() which comes from the deferred dsa_slave_switchdev_event_work(). We went to great lengths to avoid the rtnl_lock() context in that call path in commit 0faf890fc519 ("net: dsa: drop rtnl_lock from dsa_slave_switchdev_event_work"), and calling rtnl_lock() is simply not an option due to the possibility of deadlocking when calling dsa_flush_workqueue() from the call paths that do hold rtnl_lock() - basically all of them. So, when the DSA master calls vlan_for_each() from its ndo_set_rx_mode(), the state of the 8021q driver on this device is really not protected from concurrent access by anything. Looking at net/8021q/, I don't think that vlan_info->vid_list was particularly designed with RCU traversal in mind, so introducing an RCU read-side form of vlan_for_each() - vlan_for_each_rcu() - won't be so easy, and it also wouldn't be exactly what we need anyway. In general I believe that the solution isn't in net/8021q/ anyway; vlan_for_each() is not cut out for this task. DSA doesn't need rtnl_lock() to be held per se - since it's not a netdev state change that we're blocking, but rather, just concurrent additions/removals to a VLAN list. We don't even need sleepable context - the callback of vlan_for_each() just schedules deferred work. The proposed escape is to remove the dependency on vlan_for_each() and to open-code a non-sleepable, rtnl-free alternative to that, based on copies of the VLAN list modified from .ndo_vlan_rx_add_vid() and .ndo_vlan_rx_kill_vid(). Fixes: 64fdc5f341db ("net: dsa: sync unicast and multicast addresses for VLAN filters too") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20230626154402.3154454-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-26 15:44:02 +00:00
rollback:
dsa_port_host_vlan_del(dp, &vlan);
dsa_port_vlan_del(dp, &vlan);
return ret;
net: dsa: Add ndo_vlan_rx_{add, kill}_vid implementation In order to properly support VLAN filtering being enabled/disabled on a bridge, while having other ports being non bridge port members, we need to support the ndo_vlan_rx_{add,kill}_vid callbacks in order to make sure the non-bridge ports can continue receiving VLAN tags, even when the switch is globally configured to do ingress/egress VID checking. Since we can call dsa_port_vlan_{add,del} with a bridge_dev pointer NULL, we now need to check that in these two functions. We specifically deal with two possibly problematic cases: - creating a bridge VLAN entry while there is an existing VLAN device claiming that same VID - creating a VLAN device while there is an existing bridge VLAN entry with that VID Those are both resolved with returning -EBUSY back to user-space. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-20 22:35:39 +00:00
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_vlan_rx_kill_vid(struct net_device *dev, __be16 proto,
u16 vid)
net: dsa: Add ndo_vlan_rx_{add, kill}_vid implementation In order to properly support VLAN filtering being enabled/disabled on a bridge, while having other ports being non bridge port members, we need to support the ndo_vlan_rx_{add,kill}_vid callbacks in order to make sure the non-bridge ports can continue receiving VLAN tags, even when the switch is globally configured to do ingress/egress VID checking. Since we can call dsa_port_vlan_{add,del} with a bridge_dev pointer NULL, we now need to check that in these two functions. We specifically deal with two possibly problematic cases: - creating a bridge VLAN entry while there is an existing VLAN device claiming that same VID - creating a VLAN device while there is an existing bridge VLAN entry with that VID Those are both resolved with returning -EBUSY back to user-space. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-20 22:35:39 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
Revert "net: dsa: Add more convenient functions for installing port VLANs" This reverts commit 314f76d7a68bab0516aa52877944e6aacfa0fc3f. Citing that commit message, the call graph was: dsa_slave_vlan_rx_add_vid dsa_port_setup_8021q_tagging | | | | | +-------------+ | | v v dsa_port_vid_add dsa_slave_port_obj_add | | +-------+ +-------+ | | v v dsa_port_vlan_add Now that tag_8021q has its own ops structure, it no longer relies on dsa_port_vid_add, and therefore on the dsa_switch_ops to install its VLANs. So dsa_port_vid_add now only has one single caller. So we can simplify the call graph to what it was before, aka: dsa_slave_vlan_rx_add_vid dsa_slave_port_obj_add | | +-------+ +-------+ | | v v dsa_port_vlan_add Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-10 16:48:57 +00:00
struct switchdev_obj_port_vlan vlan = {
net: switchdev: remove vid_begin -> vid_end range from VLAN objects The call path of a switchdev VLAN addition to the bridge looks something like this today: nbp_vlan_init | __br_vlan_set_default_pvid | | | | | br_afspec | | | | | | | v | | | br_process_vlan_info | | | | | | | v | | | br_vlan_info | | | / \ / | | / \ / | | / \ / | | / \ / v v v v v nbp_vlan_add br_vlan_add ------+ | ^ ^ | | | / | | | | / / / | \ br_vlan_get_master/ / v \ ^ / / br_vlan_add_existing \ | / / | \ | / / / \ | / / / \ | / / / \ | / / / v | | v / __vlan_add / / | / / | / v | / __vlan_vid_add | / \ | / v v v br_switchdev_port_vlan_add The ranges UAPI was introduced to the bridge in commit bdced7ef7838 ("bridge: support for multiple vlans and vlan ranges in setlink and dellink requests") (Jan 10 2015). But the VLAN ranges (parsed in br_afspec) have always been passed one by one, through struct bridge_vlan_info tmp_vinfo, to br_vlan_info. So the range never went too far in depth. Then Scott Feldman introduced the switchdev_port_bridge_setlink function in commit 47f8328bb1a4 ("switchdev: add new switchdev bridge setlink"). That marked the introduction of the SWITCHDEV_OBJ_PORT_VLAN, which made full use of the range. But switchdev_port_bridge_setlink was called like this: br_setlink -> br_afspec -> switchdev_port_bridge_setlink Basically, the switchdev and the bridge code were not tightly integrated. Then commit 41c498b9359e ("bridge: restore br_setlink back to original") came, and switchdev drivers were required to implement .ndo_bridge_setlink = switchdev_port_bridge_setlink for a while. In the meantime, commits such as 0944d6b5a2fa ("bridge: try switchdev op first in __vlan_vid_add/del") finally made switchdev penetrate the br_vlan_info() barrier and start to develop the call path we have today. But remember, br_vlan_info() still receives VLANs one by one. Then Arkadi Sharshevsky refactored the switchdev API in 2017 in commit 29ab586c3d83 ("net: switchdev: Remove bridge bypass support from switchdev") so that drivers would not implement .ndo_bridge_setlink any longer. The switchdev_port_bridge_setlink also got deleted. This refactoring removed the parallel bridge_setlink implementation from switchdev, and left the only switchdev VLAN objects to be the ones offloaded from __vlan_vid_add (basically RX filtering) and __vlan_add (the latter coming from commit 9c86ce2c1ae3 ("net: bridge: Notify about bridge VLANs")). That is to say, today the switchdev VLAN object ranges are not used in the kernel. Refactoring the above call path is a bit complicated, when the bridge VLAN call path is already a bit complicated. Let's go off and finish the job of commit 29ab586c3d83 by deleting the bogus iteration through the VLAN ranges from the drivers. Some aspects of this feature never made too much sense in the first place. For example, what is a range of VLANs all having the BRIDGE_VLAN_INFO_PVID flag supposed to mean, when a port can obviously have a single pvid? This particular configuration _is_ denied as of commit 6623c60dc28e ("bridge: vlan: enforce no pvid flag in vlan ranges"), but from an API perspective, the driver still has to play pretend, and only offload the vlan->vid_end as pvid. And the addition of a switchdev VLAN object can modify the flags of another, completely unrelated, switchdev VLAN object! (a VLAN that is PVID will invalidate the PVID flag from whatever other VLAN had previously been offloaded with switchdev and had that flag. Yet switchdev never notifies about that change, drivers are supposed to guess). Nonetheless, having a VLAN range in the API makes error handling look scarier than it really is - unwinding on errors and all of that. When in reality, no one really calls this API with more than one VLAN. It is all unnecessary complexity. And despite appearing pretentious (two-phase transactional model and all), the switchdev API is really sloppy because the VLAN addition and removal operations are not paired with one another (you can add a VLAN 100 times and delete it just once). The bridge notifies through switchdev of a VLAN addition not only when the flags of an existing VLAN change, but also when nothing changes. There are switchdev drivers out there who don't like adding a VLAN that has already been added, and those checks don't really belong at driver level. But the fact that the API contains ranges is yet another factor that prevents this from being addressed in the future. Of the existing switchdev pieces of hardware, it appears that only Mellanox Spectrum supports offloading more than one VLAN at a time, through mlxsw_sp_port_vlan_set. I have kept that code internal to the driver, because there is some more bookkeeping that makes use of it, but I deleted it from the switchdev API. But since the switchdev support for ranges has already been de facto deleted by a Mellanox employee and nobody noticed for 4 years, I'm going to assume it's not a biggie. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> # switchdev and mlxsw Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> # hellcreek Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-09 00:01:46 +00:00
.vid = vid,
Revert "net: dsa: Add more convenient functions for installing port VLANs" This reverts commit 314f76d7a68bab0516aa52877944e6aacfa0fc3f. Citing that commit message, the call graph was: dsa_slave_vlan_rx_add_vid dsa_port_setup_8021q_tagging | | | | | +-------------+ | | v v dsa_port_vid_add dsa_slave_port_obj_add | | +-------+ +-------+ | | v v dsa_port_vlan_add Now that tag_8021q has its own ops structure, it no longer relies on dsa_port_vid_add, and therefore on the dsa_switch_ops to install its VLANs. So dsa_port_vid_add now only has one single caller. So we can simplify the call graph to what it was before, aka: dsa_slave_vlan_rx_add_vid dsa_slave_port_obj_add | | +-------+ +-------+ | | v v dsa_port_vlan_add Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-10 16:48:57 +00:00
/* This API only allows programming tagged, non-PVID VIDs */
.flags = 0,
};
net: dsa: sync unicast and multicast addresses for VLAN filters too If certain conditions are met, DSA can install all necessary MAC addresses on the CPU ports as FDB entries and disable flooding towards the CPU (we call this RX filtering). There is one corner case where this does not work. ip link add br0 type bridge vlan_filtering 1 && ip link set br0 up ip link set swp0 master br0 && ip link set swp0 up ip link add link swp0 name swp0.100 type vlan id 100 ip link set swp0.100 up && ip addr add 192.168.100.1/24 dev swp0.100 Traffic through swp0.100 is broken, because the bridge turns on VLAN filtering in the swp0 port (causing RX packets to be classified to the FDB database corresponding to the VID from their 802.1Q header), and although the 8021q module does call dev_uc_add() towards the real device, that API is VLAN-unaware, so it only contains the MAC address, not the VID; and DSA's current implementation of ndo_set_rx_mode() is only for VID 0 (corresponding to FDB entries which are installed in an FDB database which is only hit when the port is VLAN-unaware). It's interesting to understand why the bridge does not turn on IFF_PROMISC for its swp0 bridge port, and it may appear at first glance that this is a regression caused by the logic in commit 2796d0c648c9 ("bridge: Automatically manage port promiscuous mode."). After all, a bridge port needs to have IFF_PROMISC by its very nature - it needs to receive and forward frames with a MAC DA different from the bridge ports' MAC addresses. While that may be true, when the bridge is VLAN-aware *and* it has a single port, there is no real reason to enable promiscuity even if that is an automatic port, with flooding and learning (there is nowhere for packets to go except to the BR_FDB_LOCAL entries), and this is how the corner case appears. Adding a second automatic interface to the bridge would make swp0 promisc as well, and would mask the corner case. Given the dev_uc_add() / ndo_set_rx_mode() API is what it is (it doesn't pass a VLAN ID), the only way to address that problem is to install host FDB entries for the cartesian product of RX filtering MAC addresses and VLAN RX filters. Fixes: 7569459a52c9 ("net: dsa: manage flooding on the CPU ports") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230329151821.745752-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-29 15:18:21 +00:00
struct dsa_switch *ds = dp->ds;
struct netdev_hw_addr *ha;
net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses When using the felix driver (the only one which supports UC filtering and MC filtering) as a DSA master for a random other DSA switch, one can see the following stack trace when the downstream switch ports join a VLAN-aware bridge: ============================= WARNING: suspicious RCU usage ----------------------------- net/8021q/vlan_core.c:238 suspicious rcu_dereference_protected() usage! stack backtrace: Workqueue: dsa_ordered dsa_slave_switchdev_event_work Call trace: lockdep_rcu_suspicious+0x170/0x210 vlan_for_each+0x8c/0x188 dsa_slave_sync_uc+0x128/0x178 __hw_addr_sync_dev+0x138/0x158 dsa_slave_set_rx_mode+0x58/0x70 __dev_set_rx_mode+0x88/0xa8 dev_uc_add+0x74/0xa0 dsa_port_bridge_host_fdb_add+0xec/0x180 dsa_slave_switchdev_event_work+0x7c/0x1c8 process_one_work+0x290/0x568 What it's saying is that vlan_for_each() expects rtnl_lock() context and it's not getting it, when it's called from the DSA master's ndo_set_rx_mode(). The caller of that - dsa_slave_set_rx_mode() - is the slave DSA interface's dsa_port_bridge_host_fdb_add() which comes from the deferred dsa_slave_switchdev_event_work(). We went to great lengths to avoid the rtnl_lock() context in that call path in commit 0faf890fc519 ("net: dsa: drop rtnl_lock from dsa_slave_switchdev_event_work"), and calling rtnl_lock() is simply not an option due to the possibility of deadlocking when calling dsa_flush_workqueue() from the call paths that do hold rtnl_lock() - basically all of them. So, when the DSA master calls vlan_for_each() from its ndo_set_rx_mode(), the state of the 8021q driver on this device is really not protected from concurrent access by anything. Looking at net/8021q/, I don't think that vlan_info->vid_list was particularly designed with RCU traversal in mind, so introducing an RCU read-side form of vlan_for_each() - vlan_for_each_rcu() - won't be so easy, and it also wouldn't be exactly what we need anyway. In general I believe that the solution isn't in net/8021q/ anyway; vlan_for_each() is not cut out for this task. DSA doesn't need rtnl_lock() to be held per se - since it's not a netdev state change that we're blocking, but rather, just concurrent additions/removals to a VLAN list. We don't even need sleepable context - the callback of vlan_for_each() just schedules deferred work. The proposed escape is to remove the dependency on vlan_for_each() and to open-code a non-sleepable, rtnl-free alternative to that, based on copies of the VLAN list modified from .ndo_vlan_rx_add_vid() and .ndo_vlan_rx_kill_vid(). Fixes: 64fdc5f341db ("net: dsa: sync unicast and multicast addresses for VLAN filters too") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20230626154402.3154454-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-26 15:44:02 +00:00
struct dsa_vlan *v;
net: dsa: install VLANs into the master's RX filter too Most DSA switch tags shift the EtherType to the right, causing the master to not parse the VLAN as VLAN. However, not all switches do that (example: tail tags, tag_8021q etc), and if the DSA master has "rx-vlan-filter: on" in ethtool -k, then we have a problem. Therefore, we could populate the VLAN table of the master, just in case (for some switches it will not make a difference), so that network I/O can work even with a VLAN filtering master. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21 00:10:29 +00:00
int err;
net: dsa: Add ndo_vlan_rx_{add, kill}_vid implementation In order to properly support VLAN filtering being enabled/disabled on a bridge, while having other ports being non bridge port members, we need to support the ndo_vlan_rx_{add,kill}_vid callbacks in order to make sure the non-bridge ports can continue receiving VLAN tags, even when the switch is globally configured to do ingress/egress VID checking. Since we can call dsa_port_vlan_{add,del} with a bridge_dev pointer NULL, we now need to check that in these two functions. We specifically deal with two possibly problematic cases: - creating a bridge VLAN entry while there is an existing VLAN device claiming that same VID - creating a VLAN device while there is an existing bridge VLAN entry with that VID Those are both resolved with returning -EBUSY back to user-space. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-20 22:35:39 +00:00
net: dsa: install VLANs into the master's RX filter too Most DSA switch tags shift the EtherType to the right, causing the master to not parse the VLAN as VLAN. However, not all switches do that (example: tail tags, tag_8021q etc), and if the DSA master has "rx-vlan-filter: on" in ethtool -k, then we have a problem. Therefore, we could populate the VLAN table of the master, just in case (for some switches it will not make a difference), so that network I/O can work even with a VLAN filtering master. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21 00:10:29 +00:00
err = dsa_port_vlan_del(dp, &vlan);
if (err)
return err;
net: dsa: sync unicast and multicast addresses for VLAN filters too If certain conditions are met, DSA can install all necessary MAC addresses on the CPU ports as FDB entries and disable flooding towards the CPU (we call this RX filtering). There is one corner case where this does not work. ip link add br0 type bridge vlan_filtering 1 && ip link set br0 up ip link set swp0 master br0 && ip link set swp0 up ip link add link swp0 name swp0.100 type vlan id 100 ip link set swp0.100 up && ip addr add 192.168.100.1/24 dev swp0.100 Traffic through swp0.100 is broken, because the bridge turns on VLAN filtering in the swp0 port (causing RX packets to be classified to the FDB database corresponding to the VID from their 802.1Q header), and although the 8021q module does call dev_uc_add() towards the real device, that API is VLAN-unaware, so it only contains the MAC address, not the VID; and DSA's current implementation of ndo_set_rx_mode() is only for VID 0 (corresponding to FDB entries which are installed in an FDB database which is only hit when the port is VLAN-unaware). It's interesting to understand why the bridge does not turn on IFF_PROMISC for its swp0 bridge port, and it may appear at first glance that this is a regression caused by the logic in commit 2796d0c648c9 ("bridge: Automatically manage port promiscuous mode."). After all, a bridge port needs to have IFF_PROMISC by its very nature - it needs to receive and forward frames with a MAC DA different from the bridge ports' MAC addresses. While that may be true, when the bridge is VLAN-aware *and* it has a single port, there is no real reason to enable promiscuity even if that is an automatic port, with flooding and learning (there is nowhere for packets to go except to the BR_FDB_LOCAL entries), and this is how the corner case appears. Adding a second automatic interface to the bridge would make swp0 promisc as well, and would mask the corner case. Given the dev_uc_add() / ndo_set_rx_mode() API is what it is (it doesn't pass a VLAN ID), the only way to address that problem is to install host FDB entries for the cartesian product of RX filtering MAC addresses and VLAN RX filters. Fixes: 7569459a52c9 ("net: dsa: manage flooding on the CPU ports") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230329151821.745752-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-29 15:18:21 +00:00
err = dsa_port_host_vlan_del(dp, &vlan);
if (err)
return err;
if (!dsa_switch_supports_uc_filtering(ds) &&
!dsa_switch_supports_mc_filtering(ds))
return 0;
netif_addr_lock_bh(dev);
net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses When using the felix driver (the only one which supports UC filtering and MC filtering) as a DSA master for a random other DSA switch, one can see the following stack trace when the downstream switch ports join a VLAN-aware bridge: ============================= WARNING: suspicious RCU usage ----------------------------- net/8021q/vlan_core.c:238 suspicious rcu_dereference_protected() usage! stack backtrace: Workqueue: dsa_ordered dsa_slave_switchdev_event_work Call trace: lockdep_rcu_suspicious+0x170/0x210 vlan_for_each+0x8c/0x188 dsa_slave_sync_uc+0x128/0x178 __hw_addr_sync_dev+0x138/0x158 dsa_slave_set_rx_mode+0x58/0x70 __dev_set_rx_mode+0x88/0xa8 dev_uc_add+0x74/0xa0 dsa_port_bridge_host_fdb_add+0xec/0x180 dsa_slave_switchdev_event_work+0x7c/0x1c8 process_one_work+0x290/0x568 What it's saying is that vlan_for_each() expects rtnl_lock() context and it's not getting it, when it's called from the DSA master's ndo_set_rx_mode(). The caller of that - dsa_slave_set_rx_mode() - is the slave DSA interface's dsa_port_bridge_host_fdb_add() which comes from the deferred dsa_slave_switchdev_event_work(). We went to great lengths to avoid the rtnl_lock() context in that call path in commit 0faf890fc519 ("net: dsa: drop rtnl_lock from dsa_slave_switchdev_event_work"), and calling rtnl_lock() is simply not an option due to the possibility of deadlocking when calling dsa_flush_workqueue() from the call paths that do hold rtnl_lock() - basically all of them. So, when the DSA master calls vlan_for_each() from its ndo_set_rx_mode(), the state of the 8021q driver on this device is really not protected from concurrent access by anything. Looking at net/8021q/, I don't think that vlan_info->vid_list was particularly designed with RCU traversal in mind, so introducing an RCU read-side form of vlan_for_each() - vlan_for_each_rcu() - won't be so easy, and it also wouldn't be exactly what we need anyway. In general I believe that the solution isn't in net/8021q/ anyway; vlan_for_each() is not cut out for this task. DSA doesn't need rtnl_lock() to be held per se - since it's not a netdev state change that we're blocking, but rather, just concurrent additions/removals to a VLAN list. We don't even need sleepable context - the callback of vlan_for_each() just schedules deferred work. The proposed escape is to remove the dependency on vlan_for_each() and to open-code a non-sleepable, rtnl-free alternative to that, based on copies of the VLAN list modified from .ndo_vlan_rx_add_vid() and .ndo_vlan_rx_kill_vid(). Fixes: 64fdc5f341db ("net: dsa: sync unicast and multicast addresses for VLAN filters too") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20230626154402.3154454-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-26 15:44:02 +00:00
v = dsa_vlan_find(&dp->user_vlans, &vlan);
if (!v) {
netif_addr_unlock_bh(dev);
return -ENOENT;
}
list_del(&v->list);
kfree(v);
net: dsa: sync unicast and multicast addresses for VLAN filters too If certain conditions are met, DSA can install all necessary MAC addresses on the CPU ports as FDB entries and disable flooding towards the CPU (we call this RX filtering). There is one corner case where this does not work. ip link add br0 type bridge vlan_filtering 1 && ip link set br0 up ip link set swp0 master br0 && ip link set swp0 up ip link add link swp0 name swp0.100 type vlan id 100 ip link set swp0.100 up && ip addr add 192.168.100.1/24 dev swp0.100 Traffic through swp0.100 is broken, because the bridge turns on VLAN filtering in the swp0 port (causing RX packets to be classified to the FDB database corresponding to the VID from their 802.1Q header), and although the 8021q module does call dev_uc_add() towards the real device, that API is VLAN-unaware, so it only contains the MAC address, not the VID; and DSA's current implementation of ndo_set_rx_mode() is only for VID 0 (corresponding to FDB entries which are installed in an FDB database which is only hit when the port is VLAN-unaware). It's interesting to understand why the bridge does not turn on IFF_PROMISC for its swp0 bridge port, and it may appear at first glance that this is a regression caused by the logic in commit 2796d0c648c9 ("bridge: Automatically manage port promiscuous mode."). After all, a bridge port needs to have IFF_PROMISC by its very nature - it needs to receive and forward frames with a MAC DA different from the bridge ports' MAC addresses. While that may be true, when the bridge is VLAN-aware *and* it has a single port, there is no real reason to enable promiscuity even if that is an automatic port, with flooding and learning (there is nowhere for packets to go except to the BR_FDB_LOCAL entries), and this is how the corner case appears. Adding a second automatic interface to the bridge would make swp0 promisc as well, and would mask the corner case. Given the dev_uc_add() / ndo_set_rx_mode() API is what it is (it doesn't pass a VLAN ID), the only way to address that problem is to install host FDB entries for the cartesian product of RX filtering MAC addresses and VLAN RX filters. Fixes: 7569459a52c9 ("net: dsa: manage flooding on the CPU ports") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230329151821.745752-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-29 15:18:21 +00:00
if (dsa_switch_supports_mc_filtering(ds)) {
netdev_for_each_synced_mc_addr(ha, dev) {
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dsa_user_schedule_standalone_work(dev, DSA_MC_DEL,
ha->addr, vid);
net: dsa: sync unicast and multicast addresses for VLAN filters too If certain conditions are met, DSA can install all necessary MAC addresses on the CPU ports as FDB entries and disable flooding towards the CPU (we call this RX filtering). There is one corner case where this does not work. ip link add br0 type bridge vlan_filtering 1 && ip link set br0 up ip link set swp0 master br0 && ip link set swp0 up ip link add link swp0 name swp0.100 type vlan id 100 ip link set swp0.100 up && ip addr add 192.168.100.1/24 dev swp0.100 Traffic through swp0.100 is broken, because the bridge turns on VLAN filtering in the swp0 port (causing RX packets to be classified to the FDB database corresponding to the VID from their 802.1Q header), and although the 8021q module does call dev_uc_add() towards the real device, that API is VLAN-unaware, so it only contains the MAC address, not the VID; and DSA's current implementation of ndo_set_rx_mode() is only for VID 0 (corresponding to FDB entries which are installed in an FDB database which is only hit when the port is VLAN-unaware). It's interesting to understand why the bridge does not turn on IFF_PROMISC for its swp0 bridge port, and it may appear at first glance that this is a regression caused by the logic in commit 2796d0c648c9 ("bridge: Automatically manage port promiscuous mode."). After all, a bridge port needs to have IFF_PROMISC by its very nature - it needs to receive and forward frames with a MAC DA different from the bridge ports' MAC addresses. While that may be true, when the bridge is VLAN-aware *and* it has a single port, there is no real reason to enable promiscuity even if that is an automatic port, with flooding and learning (there is nowhere for packets to go except to the BR_FDB_LOCAL entries), and this is how the corner case appears. Adding a second automatic interface to the bridge would make swp0 promisc as well, and would mask the corner case. Given the dev_uc_add() / ndo_set_rx_mode() API is what it is (it doesn't pass a VLAN ID), the only way to address that problem is to install host FDB entries for the cartesian product of RX filtering MAC addresses and VLAN RX filters. Fixes: 7569459a52c9 ("net: dsa: manage flooding on the CPU ports") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230329151821.745752-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-29 15:18:21 +00:00
}
}
if (dsa_switch_supports_uc_filtering(ds)) {
netdev_for_each_synced_uc_addr(ha, dev) {
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dsa_user_schedule_standalone_work(dev, DSA_UC_DEL,
ha->addr, vid);
net: dsa: sync unicast and multicast addresses for VLAN filters too If certain conditions are met, DSA can install all necessary MAC addresses on the CPU ports as FDB entries and disable flooding towards the CPU (we call this RX filtering). There is one corner case where this does not work. ip link add br0 type bridge vlan_filtering 1 && ip link set br0 up ip link set swp0 master br0 && ip link set swp0 up ip link add link swp0 name swp0.100 type vlan id 100 ip link set swp0.100 up && ip addr add 192.168.100.1/24 dev swp0.100 Traffic through swp0.100 is broken, because the bridge turns on VLAN filtering in the swp0 port (causing RX packets to be classified to the FDB database corresponding to the VID from their 802.1Q header), and although the 8021q module does call dev_uc_add() towards the real device, that API is VLAN-unaware, so it only contains the MAC address, not the VID; and DSA's current implementation of ndo_set_rx_mode() is only for VID 0 (corresponding to FDB entries which are installed in an FDB database which is only hit when the port is VLAN-unaware). It's interesting to understand why the bridge does not turn on IFF_PROMISC for its swp0 bridge port, and it may appear at first glance that this is a regression caused by the logic in commit 2796d0c648c9 ("bridge: Automatically manage port promiscuous mode."). After all, a bridge port needs to have IFF_PROMISC by its very nature - it needs to receive and forward frames with a MAC DA different from the bridge ports' MAC addresses. While that may be true, when the bridge is VLAN-aware *and* it has a single port, there is no real reason to enable promiscuity even if that is an automatic port, with flooding and learning (there is nowhere for packets to go except to the BR_FDB_LOCAL entries), and this is how the corner case appears. Adding a second automatic interface to the bridge would make swp0 promisc as well, and would mask the corner case. Given the dev_uc_add() / ndo_set_rx_mode() API is what it is (it doesn't pass a VLAN ID), the only way to address that problem is to install host FDB entries for the cartesian product of RX filtering MAC addresses and VLAN RX filters. Fixes: 7569459a52c9 ("net: dsa: manage flooding on the CPU ports") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230329151821.745752-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-29 15:18:21 +00:00
}
}
netif_addr_unlock_bh(dev);
dsa_flush_workqueue();
return 0;
net: dsa: Add ndo_vlan_rx_{add, kill}_vid implementation In order to properly support VLAN filtering being enabled/disabled on a bridge, while having other ports being non bridge port members, we need to support the ndo_vlan_rx_{add,kill}_vid callbacks in order to make sure the non-bridge ports can continue receiving VLAN tags, even when the switch is globally configured to do ingress/egress VID checking. Since we can call dsa_port_vlan_{add,del} with a bridge_dev pointer NULL, we now need to check that in these two functions. We specifically deal with two possibly problematic cases: - creating a bridge VLAN entry while there is an existing VLAN device claiming that same VID - creating a VLAN device while there is an existing bridge VLAN entry with that VID Those are both resolved with returning -EBUSY back to user-space. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-20 22:35:39 +00:00
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_restore_vlan(struct net_device *vdev, int vid, void *arg)
net: dsa: don't advertise 'rx-vlan-filter' when not needed There have been multiple independent reports about dsa_slave_vlan_rx_add_vid being called (and consequently calling the drivers' .port_vlan_add) when it isn't needed, and sometimes (not always) causing problems in the process. Case 1: mv88e6xxx_port_vlan_prepare is stubborn and only accepts VLANs on bridged ports. That is understandably so, because standalone mv88e6xxx ports are VLAN-unaware, and VTU entries are said to be a scarce resource. Otherwise said, the following fails lamentably on mv88e6xxx: ip link add br0 type bridge vlan_filtering 1 ip link set lan3 master br0 ip link add link lan10 name lan10.1 type vlan id 1 [485256.724147] mv88e6085 d0032004.mdio-mii:12: p10: hw VLAN 1 already used by port 3 in br0 RTNETLINK answers: Operation not supported This has become a worse issue since commit 9b236d2a69da ("net: dsa: Advertise the VLAN offload netdev ability only if switch supports it"). Up to that point, the driver was returning -EOPNOTSUPP and DSA was reconverting that error to 0, making the 8021q upper think all is ok (but obviously the error message was there even prior to this change). After that change the -EOPNOTSUPP is propagated to vlan_vid_add, and it is a hard error. Case 2: Ports that don't offload the Linux bridge (have a dp->bridge_dev = NULL because they don't implement .port_bridge_{join,leave}). Understandably, a standalone port should not offload VLANs either, it should remain VLAN unaware and any VLAN should be a software VLAN (as long as the hardware is not quirky, that is). In fact, dsa_slave_port_obj_add does do the right thing and rejects switchdev VLAN objects coming from the bridge when that bridge is not offloaded: case SWITCHDEV_OBJ_ID_PORT_VLAN: if (!dsa_port_offloads_bridge_port(dp, obj->orig_dev)) return -EOPNOTSUPP; err = dsa_slave_vlan_add(dev, obj, extack); But it seems that the bridge is able to trick us. The __vlan_vid_add from br_vlan.c has: /* Try switchdev op first. In case it is not supported, fallback to * 8021q add. */ err = br_switchdev_port_vlan_add(dev, v->vid, flags, extack); if (err == -EOPNOTSUPP) return vlan_vid_add(dev, br->vlan_proto, v->vid); So it says "no, no, you need this VLAN in your life!". And we, naive as we are, say "oh, this comes from the vlan_vid_add code path, it must be an 8021q upper, sure, I'll take that". And we end up with that bridge VLAN installed on our port anyway. But this time, it has the wrong flags: if the bridge was trying to install VLAN 1 as a pvid/untagged VLAN, failed via switchdev, retried via vlan_vid_add, we have this comment: /* This API only allows programming tagged, non-PVID VIDs */ So what we do makes absolutely no sense. Backtracing a bit, we see the common pattern. We allow the network stack to think that our standalone ports are VLAN-aware, but they aren't, for the vast majority of switches. The quirky ones should not dictate the norm. The dsa_slave_vlan_rx_add_vid and dsa_slave_vlan_rx_kill_vid methods exist for drivers that need the 'rx-vlan-filter: on' feature in ethtool -k, which can be due to any of the following reasons: 1. vlan_filtering_is_global = true, and some ports are under a VLAN-aware bridge while others are standalone, and the standalone ports would otherwise drop VLAN-tagged traffic. This is described in commit 061f6a505ac3 ("net: dsa: Add ndo_vlan_rx_{add, kill}_vid implementation"). 2. the ports that are under a VLAN-aware bridge should also set this feature, for 8021q uppers having a VID not claimed by the bridge. In this case, the driver will essentially not even know that the VID is coming from the 8021q layer and not the bridge. 3. Hellcreek. This driver needs it because in standalone mode, it uses unique VLANs per port to ensure separation. For separation of untagged traffic, it uses different PVIDs for each port, and for separation of VLAN-tagged traffic, it never accepts 8021q uppers with the same vid on two ports. If a driver does not fall under any of the above 3 categories, there is no reason why it should advertise the 'rx-vlan-filter' feature, therefore no reason why it should offload the VLANs added through vlan_vid_add. This commit fixes the problem by removing the 'rx-vlan-filter' feature from the slave devices when they operate in standalone mode, and when they offload a VLAN-unaware bridge. The way it works is that vlan_vid_add will now stop its processing here: vlan_add_rx_filter_info: if (!vlan_hw_filter_capable(dev, proto)) return 0; So the VLAN will still be saved in the interface's VLAN RX filtering list, but because it does not declare VLAN filtering in its features, the 8021q module will return zero without committing that VLAN to hardware. This gives the drivers what they want, since it keeps the 8021q VLANs away from the VLAN table until VLAN awareness is enabled (point at which the ports are no longer standalone, hence in the mv88e6xxx case, the check in mv88e6xxx_port_vlan_prepare passes). Since the issue predates the existence of the hellcreek driver, case 3 will be dealt with in a separate patch. The main change that this patch makes is to no longer set NETIF_F_HW_VLAN_CTAG_FILTER unconditionally, but toggle it dynamically (for most switches, never). The second part of the patch addresses an issue that the first part introduces: because the 'rx-vlan-filter' feature is now dynamically toggled, and our .ndo_vlan_rx_add_vid does not get called when 'rx-vlan-filter' is off, we need to avoid bugs such as the following by replaying the VLANs from 8021q uppers every time we enable VLAN filtering: ip link add link lan0 name lan0.100 type vlan id 100 ip addr add 192.168.100.1/24 dev lan0.100 ping 192.168.100.2 # should work ip link add br0 type bridge vlan_filtering 0 ip link set lan0 master br0 ping 192.168.100.2 # should still work ip link set br0 type bridge vlan_filtering 1 ping 192.168.100.2 # should still work but doesn't As reported by Florian, some drivers look at ds->vlan_filtering in their .port_vlan_add() implementation. So this patch also makes sure that ds->vlan_filtering is committed before calling the driver. This is the reason why it is first committed, then restored on the failure path. Reported-by: Tobias Waldekranz <tobias@waldekranz.com> Reported-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-23 21:22:57 +00:00
{
__be16 proto = vdev ? vlan_dev_vlan_proto(vdev) : htons(ETH_P_8021Q);
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
return dsa_user_vlan_rx_add_vid(arg, proto, vid);
net: dsa: don't advertise 'rx-vlan-filter' when not needed There have been multiple independent reports about dsa_slave_vlan_rx_add_vid being called (and consequently calling the drivers' .port_vlan_add) when it isn't needed, and sometimes (not always) causing problems in the process. Case 1: mv88e6xxx_port_vlan_prepare is stubborn and only accepts VLANs on bridged ports. That is understandably so, because standalone mv88e6xxx ports are VLAN-unaware, and VTU entries are said to be a scarce resource. Otherwise said, the following fails lamentably on mv88e6xxx: ip link add br0 type bridge vlan_filtering 1 ip link set lan3 master br0 ip link add link lan10 name lan10.1 type vlan id 1 [485256.724147] mv88e6085 d0032004.mdio-mii:12: p10: hw VLAN 1 already used by port 3 in br0 RTNETLINK answers: Operation not supported This has become a worse issue since commit 9b236d2a69da ("net: dsa: Advertise the VLAN offload netdev ability only if switch supports it"). Up to that point, the driver was returning -EOPNOTSUPP and DSA was reconverting that error to 0, making the 8021q upper think all is ok (but obviously the error message was there even prior to this change). After that change the -EOPNOTSUPP is propagated to vlan_vid_add, and it is a hard error. Case 2: Ports that don't offload the Linux bridge (have a dp->bridge_dev = NULL because they don't implement .port_bridge_{join,leave}). Understandably, a standalone port should not offload VLANs either, it should remain VLAN unaware and any VLAN should be a software VLAN (as long as the hardware is not quirky, that is). In fact, dsa_slave_port_obj_add does do the right thing and rejects switchdev VLAN objects coming from the bridge when that bridge is not offloaded: case SWITCHDEV_OBJ_ID_PORT_VLAN: if (!dsa_port_offloads_bridge_port(dp, obj->orig_dev)) return -EOPNOTSUPP; err = dsa_slave_vlan_add(dev, obj, extack); But it seems that the bridge is able to trick us. The __vlan_vid_add from br_vlan.c has: /* Try switchdev op first. In case it is not supported, fallback to * 8021q add. */ err = br_switchdev_port_vlan_add(dev, v->vid, flags, extack); if (err == -EOPNOTSUPP) return vlan_vid_add(dev, br->vlan_proto, v->vid); So it says "no, no, you need this VLAN in your life!". And we, naive as we are, say "oh, this comes from the vlan_vid_add code path, it must be an 8021q upper, sure, I'll take that". And we end up with that bridge VLAN installed on our port anyway. But this time, it has the wrong flags: if the bridge was trying to install VLAN 1 as a pvid/untagged VLAN, failed via switchdev, retried via vlan_vid_add, we have this comment: /* This API only allows programming tagged, non-PVID VIDs */ So what we do makes absolutely no sense. Backtracing a bit, we see the common pattern. We allow the network stack to think that our standalone ports are VLAN-aware, but they aren't, for the vast majority of switches. The quirky ones should not dictate the norm. The dsa_slave_vlan_rx_add_vid and dsa_slave_vlan_rx_kill_vid methods exist for drivers that need the 'rx-vlan-filter: on' feature in ethtool -k, which can be due to any of the following reasons: 1. vlan_filtering_is_global = true, and some ports are under a VLAN-aware bridge while others are standalone, and the standalone ports would otherwise drop VLAN-tagged traffic. This is described in commit 061f6a505ac3 ("net: dsa: Add ndo_vlan_rx_{add, kill}_vid implementation"). 2. the ports that are under a VLAN-aware bridge should also set this feature, for 8021q uppers having a VID not claimed by the bridge. In this case, the driver will essentially not even know that the VID is coming from the 8021q layer and not the bridge. 3. Hellcreek. This driver needs it because in standalone mode, it uses unique VLANs per port to ensure separation. For separation of untagged traffic, it uses different PVIDs for each port, and for separation of VLAN-tagged traffic, it never accepts 8021q uppers with the same vid on two ports. If a driver does not fall under any of the above 3 categories, there is no reason why it should advertise the 'rx-vlan-filter' feature, therefore no reason why it should offload the VLANs added through vlan_vid_add. This commit fixes the problem by removing the 'rx-vlan-filter' feature from the slave devices when they operate in standalone mode, and when they offload a VLAN-unaware bridge. The way it works is that vlan_vid_add will now stop its processing here: vlan_add_rx_filter_info: if (!vlan_hw_filter_capable(dev, proto)) return 0; So the VLAN will still be saved in the interface's VLAN RX filtering list, but because it does not declare VLAN filtering in its features, the 8021q module will return zero without committing that VLAN to hardware. This gives the drivers what they want, since it keeps the 8021q VLANs away from the VLAN table until VLAN awareness is enabled (point at which the ports are no longer standalone, hence in the mv88e6xxx case, the check in mv88e6xxx_port_vlan_prepare passes). Since the issue predates the existence of the hellcreek driver, case 3 will be dealt with in a separate patch. The main change that this patch makes is to no longer set NETIF_F_HW_VLAN_CTAG_FILTER unconditionally, but toggle it dynamically (for most switches, never). The second part of the patch addresses an issue that the first part introduces: because the 'rx-vlan-filter' feature is now dynamically toggled, and our .ndo_vlan_rx_add_vid does not get called when 'rx-vlan-filter' is off, we need to avoid bugs such as the following by replaying the VLANs from 8021q uppers every time we enable VLAN filtering: ip link add link lan0 name lan0.100 type vlan id 100 ip addr add 192.168.100.1/24 dev lan0.100 ping 192.168.100.2 # should work ip link add br0 type bridge vlan_filtering 0 ip link set lan0 master br0 ping 192.168.100.2 # should still work ip link set br0 type bridge vlan_filtering 1 ping 192.168.100.2 # should still work but doesn't As reported by Florian, some drivers look at ds->vlan_filtering in their .port_vlan_add() implementation. So this patch also makes sure that ds->vlan_filtering is committed before calling the driver. This is the reason why it is first committed, then restored on the failure path. Reported-by: Tobias Waldekranz <tobias@waldekranz.com> Reported-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-23 21:22:57 +00:00
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_clear_vlan(struct net_device *vdev, int vid, void *arg)
net: dsa: don't advertise 'rx-vlan-filter' when not needed There have been multiple independent reports about dsa_slave_vlan_rx_add_vid being called (and consequently calling the drivers' .port_vlan_add) when it isn't needed, and sometimes (not always) causing problems in the process. Case 1: mv88e6xxx_port_vlan_prepare is stubborn and only accepts VLANs on bridged ports. That is understandably so, because standalone mv88e6xxx ports are VLAN-unaware, and VTU entries are said to be a scarce resource. Otherwise said, the following fails lamentably on mv88e6xxx: ip link add br0 type bridge vlan_filtering 1 ip link set lan3 master br0 ip link add link lan10 name lan10.1 type vlan id 1 [485256.724147] mv88e6085 d0032004.mdio-mii:12: p10: hw VLAN 1 already used by port 3 in br0 RTNETLINK answers: Operation not supported This has become a worse issue since commit 9b236d2a69da ("net: dsa: Advertise the VLAN offload netdev ability only if switch supports it"). Up to that point, the driver was returning -EOPNOTSUPP and DSA was reconverting that error to 0, making the 8021q upper think all is ok (but obviously the error message was there even prior to this change). After that change the -EOPNOTSUPP is propagated to vlan_vid_add, and it is a hard error. Case 2: Ports that don't offload the Linux bridge (have a dp->bridge_dev = NULL because they don't implement .port_bridge_{join,leave}). Understandably, a standalone port should not offload VLANs either, it should remain VLAN unaware and any VLAN should be a software VLAN (as long as the hardware is not quirky, that is). In fact, dsa_slave_port_obj_add does do the right thing and rejects switchdev VLAN objects coming from the bridge when that bridge is not offloaded: case SWITCHDEV_OBJ_ID_PORT_VLAN: if (!dsa_port_offloads_bridge_port(dp, obj->orig_dev)) return -EOPNOTSUPP; err = dsa_slave_vlan_add(dev, obj, extack); But it seems that the bridge is able to trick us. The __vlan_vid_add from br_vlan.c has: /* Try switchdev op first. In case it is not supported, fallback to * 8021q add. */ err = br_switchdev_port_vlan_add(dev, v->vid, flags, extack); if (err == -EOPNOTSUPP) return vlan_vid_add(dev, br->vlan_proto, v->vid); So it says "no, no, you need this VLAN in your life!". And we, naive as we are, say "oh, this comes from the vlan_vid_add code path, it must be an 8021q upper, sure, I'll take that". And we end up with that bridge VLAN installed on our port anyway. But this time, it has the wrong flags: if the bridge was trying to install VLAN 1 as a pvid/untagged VLAN, failed via switchdev, retried via vlan_vid_add, we have this comment: /* This API only allows programming tagged, non-PVID VIDs */ So what we do makes absolutely no sense. Backtracing a bit, we see the common pattern. We allow the network stack to think that our standalone ports are VLAN-aware, but they aren't, for the vast majority of switches. The quirky ones should not dictate the norm. The dsa_slave_vlan_rx_add_vid and dsa_slave_vlan_rx_kill_vid methods exist for drivers that need the 'rx-vlan-filter: on' feature in ethtool -k, which can be due to any of the following reasons: 1. vlan_filtering_is_global = true, and some ports are under a VLAN-aware bridge while others are standalone, and the standalone ports would otherwise drop VLAN-tagged traffic. This is described in commit 061f6a505ac3 ("net: dsa: Add ndo_vlan_rx_{add, kill}_vid implementation"). 2. the ports that are under a VLAN-aware bridge should also set this feature, for 8021q uppers having a VID not claimed by the bridge. In this case, the driver will essentially not even know that the VID is coming from the 8021q layer and not the bridge. 3. Hellcreek. This driver needs it because in standalone mode, it uses unique VLANs per port to ensure separation. For separation of untagged traffic, it uses different PVIDs for each port, and for separation of VLAN-tagged traffic, it never accepts 8021q uppers with the same vid on two ports. If a driver does not fall under any of the above 3 categories, there is no reason why it should advertise the 'rx-vlan-filter' feature, therefore no reason why it should offload the VLANs added through vlan_vid_add. This commit fixes the problem by removing the 'rx-vlan-filter' feature from the slave devices when they operate in standalone mode, and when they offload a VLAN-unaware bridge. The way it works is that vlan_vid_add will now stop its processing here: vlan_add_rx_filter_info: if (!vlan_hw_filter_capable(dev, proto)) return 0; So the VLAN will still be saved in the interface's VLAN RX filtering list, but because it does not declare VLAN filtering in its features, the 8021q module will return zero without committing that VLAN to hardware. This gives the drivers what they want, since it keeps the 8021q VLANs away from the VLAN table until VLAN awareness is enabled (point at which the ports are no longer standalone, hence in the mv88e6xxx case, the check in mv88e6xxx_port_vlan_prepare passes). Since the issue predates the existence of the hellcreek driver, case 3 will be dealt with in a separate patch. The main change that this patch makes is to no longer set NETIF_F_HW_VLAN_CTAG_FILTER unconditionally, but toggle it dynamically (for most switches, never). The second part of the patch addresses an issue that the first part introduces: because the 'rx-vlan-filter' feature is now dynamically toggled, and our .ndo_vlan_rx_add_vid does not get called when 'rx-vlan-filter' is off, we need to avoid bugs such as the following by replaying the VLANs from 8021q uppers every time we enable VLAN filtering: ip link add link lan0 name lan0.100 type vlan id 100 ip addr add 192.168.100.1/24 dev lan0.100 ping 192.168.100.2 # should work ip link add br0 type bridge vlan_filtering 0 ip link set lan0 master br0 ping 192.168.100.2 # should still work ip link set br0 type bridge vlan_filtering 1 ping 192.168.100.2 # should still work but doesn't As reported by Florian, some drivers look at ds->vlan_filtering in their .port_vlan_add() implementation. So this patch also makes sure that ds->vlan_filtering is committed before calling the driver. This is the reason why it is first committed, then restored on the failure path. Reported-by: Tobias Waldekranz <tobias@waldekranz.com> Reported-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-23 21:22:57 +00:00
{
__be16 proto = vdev ? vlan_dev_vlan_proto(vdev) : htons(ETH_P_8021Q);
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
return dsa_user_vlan_rx_kill_vid(arg, proto, vid);
net: dsa: don't advertise 'rx-vlan-filter' when not needed There have been multiple independent reports about dsa_slave_vlan_rx_add_vid being called (and consequently calling the drivers' .port_vlan_add) when it isn't needed, and sometimes (not always) causing problems in the process. Case 1: mv88e6xxx_port_vlan_prepare is stubborn and only accepts VLANs on bridged ports. That is understandably so, because standalone mv88e6xxx ports are VLAN-unaware, and VTU entries are said to be a scarce resource. Otherwise said, the following fails lamentably on mv88e6xxx: ip link add br0 type bridge vlan_filtering 1 ip link set lan3 master br0 ip link add link lan10 name lan10.1 type vlan id 1 [485256.724147] mv88e6085 d0032004.mdio-mii:12: p10: hw VLAN 1 already used by port 3 in br0 RTNETLINK answers: Operation not supported This has become a worse issue since commit 9b236d2a69da ("net: dsa: Advertise the VLAN offload netdev ability only if switch supports it"). Up to that point, the driver was returning -EOPNOTSUPP and DSA was reconverting that error to 0, making the 8021q upper think all is ok (but obviously the error message was there even prior to this change). After that change the -EOPNOTSUPP is propagated to vlan_vid_add, and it is a hard error. Case 2: Ports that don't offload the Linux bridge (have a dp->bridge_dev = NULL because they don't implement .port_bridge_{join,leave}). Understandably, a standalone port should not offload VLANs either, it should remain VLAN unaware and any VLAN should be a software VLAN (as long as the hardware is not quirky, that is). In fact, dsa_slave_port_obj_add does do the right thing and rejects switchdev VLAN objects coming from the bridge when that bridge is not offloaded: case SWITCHDEV_OBJ_ID_PORT_VLAN: if (!dsa_port_offloads_bridge_port(dp, obj->orig_dev)) return -EOPNOTSUPP; err = dsa_slave_vlan_add(dev, obj, extack); But it seems that the bridge is able to trick us. The __vlan_vid_add from br_vlan.c has: /* Try switchdev op first. In case it is not supported, fallback to * 8021q add. */ err = br_switchdev_port_vlan_add(dev, v->vid, flags, extack); if (err == -EOPNOTSUPP) return vlan_vid_add(dev, br->vlan_proto, v->vid); So it says "no, no, you need this VLAN in your life!". And we, naive as we are, say "oh, this comes from the vlan_vid_add code path, it must be an 8021q upper, sure, I'll take that". And we end up with that bridge VLAN installed on our port anyway. But this time, it has the wrong flags: if the bridge was trying to install VLAN 1 as a pvid/untagged VLAN, failed via switchdev, retried via vlan_vid_add, we have this comment: /* This API only allows programming tagged, non-PVID VIDs */ So what we do makes absolutely no sense. Backtracing a bit, we see the common pattern. We allow the network stack to think that our standalone ports are VLAN-aware, but they aren't, for the vast majority of switches. The quirky ones should not dictate the norm. The dsa_slave_vlan_rx_add_vid and dsa_slave_vlan_rx_kill_vid methods exist for drivers that need the 'rx-vlan-filter: on' feature in ethtool -k, which can be due to any of the following reasons: 1. vlan_filtering_is_global = true, and some ports are under a VLAN-aware bridge while others are standalone, and the standalone ports would otherwise drop VLAN-tagged traffic. This is described in commit 061f6a505ac3 ("net: dsa: Add ndo_vlan_rx_{add, kill}_vid implementation"). 2. the ports that are under a VLAN-aware bridge should also set this feature, for 8021q uppers having a VID not claimed by the bridge. In this case, the driver will essentially not even know that the VID is coming from the 8021q layer and not the bridge. 3. Hellcreek. This driver needs it because in standalone mode, it uses unique VLANs per port to ensure separation. For separation of untagged traffic, it uses different PVIDs for each port, and for separation of VLAN-tagged traffic, it never accepts 8021q uppers with the same vid on two ports. If a driver does not fall under any of the above 3 categories, there is no reason why it should advertise the 'rx-vlan-filter' feature, therefore no reason why it should offload the VLANs added through vlan_vid_add. This commit fixes the problem by removing the 'rx-vlan-filter' feature from the slave devices when they operate in standalone mode, and when they offload a VLAN-unaware bridge. The way it works is that vlan_vid_add will now stop its processing here: vlan_add_rx_filter_info: if (!vlan_hw_filter_capable(dev, proto)) return 0; So the VLAN will still be saved in the interface's VLAN RX filtering list, but because it does not declare VLAN filtering in its features, the 8021q module will return zero without committing that VLAN to hardware. This gives the drivers what they want, since it keeps the 8021q VLANs away from the VLAN table until VLAN awareness is enabled (point at which the ports are no longer standalone, hence in the mv88e6xxx case, the check in mv88e6xxx_port_vlan_prepare passes). Since the issue predates the existence of the hellcreek driver, case 3 will be dealt with in a separate patch. The main change that this patch makes is to no longer set NETIF_F_HW_VLAN_CTAG_FILTER unconditionally, but toggle it dynamically (for most switches, never). The second part of the patch addresses an issue that the first part introduces: because the 'rx-vlan-filter' feature is now dynamically toggled, and our .ndo_vlan_rx_add_vid does not get called when 'rx-vlan-filter' is off, we need to avoid bugs such as the following by replaying the VLANs from 8021q uppers every time we enable VLAN filtering: ip link add link lan0 name lan0.100 type vlan id 100 ip addr add 192.168.100.1/24 dev lan0.100 ping 192.168.100.2 # should work ip link add br0 type bridge vlan_filtering 0 ip link set lan0 master br0 ping 192.168.100.2 # should still work ip link set br0 type bridge vlan_filtering 1 ping 192.168.100.2 # should still work but doesn't As reported by Florian, some drivers look at ds->vlan_filtering in their .port_vlan_add() implementation. So this patch also makes sure that ds->vlan_filtering is committed before calling the driver. This is the reason why it is first committed, then restored on the failure path. Reported-by: Tobias Waldekranz <tobias@waldekranz.com> Reported-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-23 21:22:57 +00:00
}
/* Keep the VLAN RX filtering list in sync with the hardware only if VLAN
* filtering is enabled. The baseline is that only ports that offload a
* VLAN-aware bridge are VLAN-aware, and standalone ports are VLAN-unaware,
* but there are exceptions for quirky hardware.
*
* If ds->vlan_filtering_is_global = true, then standalone ports which share
* the same switch with other ports that offload a VLAN-aware bridge are also
* inevitably VLAN-aware.
*
* To summarize, a DSA switch port offloads:
*
* - If standalone (this includes software bridge, software LAG):
net: dsa: let drivers state that they need VLAN filtering while standalone As explained in commit e358bef7c392 ("net: dsa: Give drivers the chance to veto certain upper devices"), the hellcreek driver uses some tricks to comply with the network stack expectations: it enforces port separation in standalone mode using VLANs. For untagged traffic, bridging between ports is prevented by using different PVIDs, and for VLAN-tagged traffic, it never accepts 8021q uppers with the same VID on two ports, so packets with one VLAN cannot leak from one port to another. That is almost fine*, and has worked because hellcreek relied on an implicit behavior of the DSA core that was changed by the previous patch: the standalone ports declare the 'rx-vlan-filter' feature as 'on [fixed]'. Since most of the DSA drivers are actually VLAN-unaware in standalone mode, that feature was actually incorrectly reflecting the hardware/driver state, so there was a desire to fix it. This leaves the hellcreek driver in a situation where it has to explicitly request this behavior from the DSA framework. We configure the ports as follows: - Standalone: 'rx-vlan-filter' is on. An 8021q upper on top of a standalone hellcreek port will go through dsa_slave_vlan_rx_add_vid and will add a VLAN to the hardware tables, giving the driver the opportunity to refuse it through .port_prechangeupper. - Bridged with vlan_filtering=0: 'rx-vlan-filter' is off. An 8021q upper on top of a bridged hellcreek port will not go through dsa_slave_vlan_rx_add_vid, because there will not be any attempt to offload this VLAN. The driver already disables VLAN awareness, so that upper should receive the traffic it needs. - Bridged with vlan_filtering=1: 'rx-vlan-filter' is on. An 8021q upper on top of a bridged hellcreek port will call dsa_slave_vlan_rx_add_vid, and can again be vetoed through .port_prechangeupper. *It is not actually completely fine, because if I follow through correctly, we can have the following situation: ip link add br0 type bridge vlan_filtering 0 ip link set lan0 master br0 # lan0 now becomes VLAN-unaware ip link set lan0 nomaster # lan0 fails to become VLAN-aware again, therefore breaking isolation This patch fixes that corner case by extending the DSA core logic, based on this requested attribute, to change the VLAN awareness state of the switch (port) when it leaves the bridge. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-23 21:22:58 +00:00
* - if ds->needs_standalone_vlan_filtering = true, OR if
* (ds->vlan_filtering_is_global = true AND there are bridges spanning
* this switch chip which have vlan_filtering=1)
net: dsa: don't advertise 'rx-vlan-filter' when not needed There have been multiple independent reports about dsa_slave_vlan_rx_add_vid being called (and consequently calling the drivers' .port_vlan_add) when it isn't needed, and sometimes (not always) causing problems in the process. Case 1: mv88e6xxx_port_vlan_prepare is stubborn and only accepts VLANs on bridged ports. That is understandably so, because standalone mv88e6xxx ports are VLAN-unaware, and VTU entries are said to be a scarce resource. Otherwise said, the following fails lamentably on mv88e6xxx: ip link add br0 type bridge vlan_filtering 1 ip link set lan3 master br0 ip link add link lan10 name lan10.1 type vlan id 1 [485256.724147] mv88e6085 d0032004.mdio-mii:12: p10: hw VLAN 1 already used by port 3 in br0 RTNETLINK answers: Operation not supported This has become a worse issue since commit 9b236d2a69da ("net: dsa: Advertise the VLAN offload netdev ability only if switch supports it"). Up to that point, the driver was returning -EOPNOTSUPP and DSA was reconverting that error to 0, making the 8021q upper think all is ok (but obviously the error message was there even prior to this change). After that change the -EOPNOTSUPP is propagated to vlan_vid_add, and it is a hard error. Case 2: Ports that don't offload the Linux bridge (have a dp->bridge_dev = NULL because they don't implement .port_bridge_{join,leave}). Understandably, a standalone port should not offload VLANs either, it should remain VLAN unaware and any VLAN should be a software VLAN (as long as the hardware is not quirky, that is). In fact, dsa_slave_port_obj_add does do the right thing and rejects switchdev VLAN objects coming from the bridge when that bridge is not offloaded: case SWITCHDEV_OBJ_ID_PORT_VLAN: if (!dsa_port_offloads_bridge_port(dp, obj->orig_dev)) return -EOPNOTSUPP; err = dsa_slave_vlan_add(dev, obj, extack); But it seems that the bridge is able to trick us. The __vlan_vid_add from br_vlan.c has: /* Try switchdev op first. In case it is not supported, fallback to * 8021q add. */ err = br_switchdev_port_vlan_add(dev, v->vid, flags, extack); if (err == -EOPNOTSUPP) return vlan_vid_add(dev, br->vlan_proto, v->vid); So it says "no, no, you need this VLAN in your life!". And we, naive as we are, say "oh, this comes from the vlan_vid_add code path, it must be an 8021q upper, sure, I'll take that". And we end up with that bridge VLAN installed on our port anyway. But this time, it has the wrong flags: if the bridge was trying to install VLAN 1 as a pvid/untagged VLAN, failed via switchdev, retried via vlan_vid_add, we have this comment: /* This API only allows programming tagged, non-PVID VIDs */ So what we do makes absolutely no sense. Backtracing a bit, we see the common pattern. We allow the network stack to think that our standalone ports are VLAN-aware, but they aren't, for the vast majority of switches. The quirky ones should not dictate the norm. The dsa_slave_vlan_rx_add_vid and dsa_slave_vlan_rx_kill_vid methods exist for drivers that need the 'rx-vlan-filter: on' feature in ethtool -k, which can be due to any of the following reasons: 1. vlan_filtering_is_global = true, and some ports are under a VLAN-aware bridge while others are standalone, and the standalone ports would otherwise drop VLAN-tagged traffic. This is described in commit 061f6a505ac3 ("net: dsa: Add ndo_vlan_rx_{add, kill}_vid implementation"). 2. the ports that are under a VLAN-aware bridge should also set this feature, for 8021q uppers having a VID not claimed by the bridge. In this case, the driver will essentially not even know that the VID is coming from the 8021q layer and not the bridge. 3. Hellcreek. This driver needs it because in standalone mode, it uses unique VLANs per port to ensure separation. For separation of untagged traffic, it uses different PVIDs for each port, and for separation of VLAN-tagged traffic, it never accepts 8021q uppers with the same vid on two ports. If a driver does not fall under any of the above 3 categories, there is no reason why it should advertise the 'rx-vlan-filter' feature, therefore no reason why it should offload the VLANs added through vlan_vid_add. This commit fixes the problem by removing the 'rx-vlan-filter' feature from the slave devices when they operate in standalone mode, and when they offload a VLAN-unaware bridge. The way it works is that vlan_vid_add will now stop its processing here: vlan_add_rx_filter_info: if (!vlan_hw_filter_capable(dev, proto)) return 0; So the VLAN will still be saved in the interface's VLAN RX filtering list, but because it does not declare VLAN filtering in its features, the 8021q module will return zero without committing that VLAN to hardware. This gives the drivers what they want, since it keeps the 8021q VLANs away from the VLAN table until VLAN awareness is enabled (point at which the ports are no longer standalone, hence in the mv88e6xxx case, the check in mv88e6xxx_port_vlan_prepare passes). Since the issue predates the existence of the hellcreek driver, case 3 will be dealt with in a separate patch. The main change that this patch makes is to no longer set NETIF_F_HW_VLAN_CTAG_FILTER unconditionally, but toggle it dynamically (for most switches, never). The second part of the patch addresses an issue that the first part introduces: because the 'rx-vlan-filter' feature is now dynamically toggled, and our .ndo_vlan_rx_add_vid does not get called when 'rx-vlan-filter' is off, we need to avoid bugs such as the following by replaying the VLANs from 8021q uppers every time we enable VLAN filtering: ip link add link lan0 name lan0.100 type vlan id 100 ip addr add 192.168.100.1/24 dev lan0.100 ping 192.168.100.2 # should work ip link add br0 type bridge vlan_filtering 0 ip link set lan0 master br0 ping 192.168.100.2 # should still work ip link set br0 type bridge vlan_filtering 1 ping 192.168.100.2 # should still work but doesn't As reported by Florian, some drivers look at ds->vlan_filtering in their .port_vlan_add() implementation. So this patch also makes sure that ds->vlan_filtering is committed before calling the driver. This is the reason why it is first committed, then restored on the failure path. Reported-by: Tobias Waldekranz <tobias@waldekranz.com> Reported-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-23 21:22:57 +00:00
* - the 8021q upper VLANs
net: dsa: let drivers state that they need VLAN filtering while standalone As explained in commit e358bef7c392 ("net: dsa: Give drivers the chance to veto certain upper devices"), the hellcreek driver uses some tricks to comply with the network stack expectations: it enforces port separation in standalone mode using VLANs. For untagged traffic, bridging between ports is prevented by using different PVIDs, and for VLAN-tagged traffic, it never accepts 8021q uppers with the same VID on two ports, so packets with one VLAN cannot leak from one port to another. That is almost fine*, and has worked because hellcreek relied on an implicit behavior of the DSA core that was changed by the previous patch: the standalone ports declare the 'rx-vlan-filter' feature as 'on [fixed]'. Since most of the DSA drivers are actually VLAN-unaware in standalone mode, that feature was actually incorrectly reflecting the hardware/driver state, so there was a desire to fix it. This leaves the hellcreek driver in a situation where it has to explicitly request this behavior from the DSA framework. We configure the ports as follows: - Standalone: 'rx-vlan-filter' is on. An 8021q upper on top of a standalone hellcreek port will go through dsa_slave_vlan_rx_add_vid and will add a VLAN to the hardware tables, giving the driver the opportunity to refuse it through .port_prechangeupper. - Bridged with vlan_filtering=0: 'rx-vlan-filter' is off. An 8021q upper on top of a bridged hellcreek port will not go through dsa_slave_vlan_rx_add_vid, because there will not be any attempt to offload this VLAN. The driver already disables VLAN awareness, so that upper should receive the traffic it needs. - Bridged with vlan_filtering=1: 'rx-vlan-filter' is on. An 8021q upper on top of a bridged hellcreek port will call dsa_slave_vlan_rx_add_vid, and can again be vetoed through .port_prechangeupper. *It is not actually completely fine, because if I follow through correctly, we can have the following situation: ip link add br0 type bridge vlan_filtering 0 ip link set lan0 master br0 # lan0 now becomes VLAN-unaware ip link set lan0 nomaster # lan0 fails to become VLAN-aware again, therefore breaking isolation This patch fixes that corner case by extending the DSA core logic, based on this requested attribute, to change the VLAN awareness state of the switch (port) when it leaves the bridge. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-23 21:22:58 +00:00
* - else (standalone VLAN filtering is not needed, VLAN filtering is not
* global, or it is, but no port is under a VLAN-aware bridge):
net: dsa: don't advertise 'rx-vlan-filter' when not needed There have been multiple independent reports about dsa_slave_vlan_rx_add_vid being called (and consequently calling the drivers' .port_vlan_add) when it isn't needed, and sometimes (not always) causing problems in the process. Case 1: mv88e6xxx_port_vlan_prepare is stubborn and only accepts VLANs on bridged ports. That is understandably so, because standalone mv88e6xxx ports are VLAN-unaware, and VTU entries are said to be a scarce resource. Otherwise said, the following fails lamentably on mv88e6xxx: ip link add br0 type bridge vlan_filtering 1 ip link set lan3 master br0 ip link add link lan10 name lan10.1 type vlan id 1 [485256.724147] mv88e6085 d0032004.mdio-mii:12: p10: hw VLAN 1 already used by port 3 in br0 RTNETLINK answers: Operation not supported This has become a worse issue since commit 9b236d2a69da ("net: dsa: Advertise the VLAN offload netdev ability only if switch supports it"). Up to that point, the driver was returning -EOPNOTSUPP and DSA was reconverting that error to 0, making the 8021q upper think all is ok (but obviously the error message was there even prior to this change). After that change the -EOPNOTSUPP is propagated to vlan_vid_add, and it is a hard error. Case 2: Ports that don't offload the Linux bridge (have a dp->bridge_dev = NULL because they don't implement .port_bridge_{join,leave}). Understandably, a standalone port should not offload VLANs either, it should remain VLAN unaware and any VLAN should be a software VLAN (as long as the hardware is not quirky, that is). In fact, dsa_slave_port_obj_add does do the right thing and rejects switchdev VLAN objects coming from the bridge when that bridge is not offloaded: case SWITCHDEV_OBJ_ID_PORT_VLAN: if (!dsa_port_offloads_bridge_port(dp, obj->orig_dev)) return -EOPNOTSUPP; err = dsa_slave_vlan_add(dev, obj, extack); But it seems that the bridge is able to trick us. The __vlan_vid_add from br_vlan.c has: /* Try switchdev op first. In case it is not supported, fallback to * 8021q add. */ err = br_switchdev_port_vlan_add(dev, v->vid, flags, extack); if (err == -EOPNOTSUPP) return vlan_vid_add(dev, br->vlan_proto, v->vid); So it says "no, no, you need this VLAN in your life!". And we, naive as we are, say "oh, this comes from the vlan_vid_add code path, it must be an 8021q upper, sure, I'll take that". And we end up with that bridge VLAN installed on our port anyway. But this time, it has the wrong flags: if the bridge was trying to install VLAN 1 as a pvid/untagged VLAN, failed via switchdev, retried via vlan_vid_add, we have this comment: /* This API only allows programming tagged, non-PVID VIDs */ So what we do makes absolutely no sense. Backtracing a bit, we see the common pattern. We allow the network stack to think that our standalone ports are VLAN-aware, but they aren't, for the vast majority of switches. The quirky ones should not dictate the norm. The dsa_slave_vlan_rx_add_vid and dsa_slave_vlan_rx_kill_vid methods exist for drivers that need the 'rx-vlan-filter: on' feature in ethtool -k, which can be due to any of the following reasons: 1. vlan_filtering_is_global = true, and some ports are under a VLAN-aware bridge while others are standalone, and the standalone ports would otherwise drop VLAN-tagged traffic. This is described in commit 061f6a505ac3 ("net: dsa: Add ndo_vlan_rx_{add, kill}_vid implementation"). 2. the ports that are under a VLAN-aware bridge should also set this feature, for 8021q uppers having a VID not claimed by the bridge. In this case, the driver will essentially not even know that the VID is coming from the 8021q layer and not the bridge. 3. Hellcreek. This driver needs it because in standalone mode, it uses unique VLANs per port to ensure separation. For separation of untagged traffic, it uses different PVIDs for each port, and for separation of VLAN-tagged traffic, it never accepts 8021q uppers with the same vid on two ports. If a driver does not fall under any of the above 3 categories, there is no reason why it should advertise the 'rx-vlan-filter' feature, therefore no reason why it should offload the VLANs added through vlan_vid_add. This commit fixes the problem by removing the 'rx-vlan-filter' feature from the slave devices when they operate in standalone mode, and when they offload a VLAN-unaware bridge. The way it works is that vlan_vid_add will now stop its processing here: vlan_add_rx_filter_info: if (!vlan_hw_filter_capable(dev, proto)) return 0; So the VLAN will still be saved in the interface's VLAN RX filtering list, but because it does not declare VLAN filtering in its features, the 8021q module will return zero without committing that VLAN to hardware. This gives the drivers what they want, since it keeps the 8021q VLANs away from the VLAN table until VLAN awareness is enabled (point at which the ports are no longer standalone, hence in the mv88e6xxx case, the check in mv88e6xxx_port_vlan_prepare passes). Since the issue predates the existence of the hellcreek driver, case 3 will be dealt with in a separate patch. The main change that this patch makes is to no longer set NETIF_F_HW_VLAN_CTAG_FILTER unconditionally, but toggle it dynamically (for most switches, never). The second part of the patch addresses an issue that the first part introduces: because the 'rx-vlan-filter' feature is now dynamically toggled, and our .ndo_vlan_rx_add_vid does not get called when 'rx-vlan-filter' is off, we need to avoid bugs such as the following by replaying the VLANs from 8021q uppers every time we enable VLAN filtering: ip link add link lan0 name lan0.100 type vlan id 100 ip addr add 192.168.100.1/24 dev lan0.100 ping 192.168.100.2 # should work ip link add br0 type bridge vlan_filtering 0 ip link set lan0 master br0 ping 192.168.100.2 # should still work ip link set br0 type bridge vlan_filtering 1 ping 192.168.100.2 # should still work but doesn't As reported by Florian, some drivers look at ds->vlan_filtering in their .port_vlan_add() implementation. So this patch also makes sure that ds->vlan_filtering is committed before calling the driver. This is the reason why it is first committed, then restored on the failure path. Reported-by: Tobias Waldekranz <tobias@waldekranz.com> Reported-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-23 21:22:57 +00:00
* - no VLAN (any 8021q upper is a software VLAN)
*
* - If under a vlan_filtering=0 bridge which it offload:
* - if ds->configure_vlan_while_not_filtering = true (default):
* - the bridge VLANs. These VLANs are committed to hardware but inactive.
* - else (deprecated):
* - no VLAN. The bridge VLANs are not restored when VLAN awareness is
* enabled, so this behavior is broken and discouraged.
*
* - If under a vlan_filtering=1 bridge which it offload:
* - the bridge VLANs
* - the 8021q upper VLANs
*/
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
int dsa_user_manage_vlan_filtering(struct net_device *user,
bool vlan_filtering)
net: dsa: don't advertise 'rx-vlan-filter' when not needed There have been multiple independent reports about dsa_slave_vlan_rx_add_vid being called (and consequently calling the drivers' .port_vlan_add) when it isn't needed, and sometimes (not always) causing problems in the process. Case 1: mv88e6xxx_port_vlan_prepare is stubborn and only accepts VLANs on bridged ports. That is understandably so, because standalone mv88e6xxx ports are VLAN-unaware, and VTU entries are said to be a scarce resource. Otherwise said, the following fails lamentably on mv88e6xxx: ip link add br0 type bridge vlan_filtering 1 ip link set lan3 master br0 ip link add link lan10 name lan10.1 type vlan id 1 [485256.724147] mv88e6085 d0032004.mdio-mii:12: p10: hw VLAN 1 already used by port 3 in br0 RTNETLINK answers: Operation not supported This has become a worse issue since commit 9b236d2a69da ("net: dsa: Advertise the VLAN offload netdev ability only if switch supports it"). Up to that point, the driver was returning -EOPNOTSUPP and DSA was reconverting that error to 0, making the 8021q upper think all is ok (but obviously the error message was there even prior to this change). After that change the -EOPNOTSUPP is propagated to vlan_vid_add, and it is a hard error. Case 2: Ports that don't offload the Linux bridge (have a dp->bridge_dev = NULL because they don't implement .port_bridge_{join,leave}). Understandably, a standalone port should not offload VLANs either, it should remain VLAN unaware and any VLAN should be a software VLAN (as long as the hardware is not quirky, that is). In fact, dsa_slave_port_obj_add does do the right thing and rejects switchdev VLAN objects coming from the bridge when that bridge is not offloaded: case SWITCHDEV_OBJ_ID_PORT_VLAN: if (!dsa_port_offloads_bridge_port(dp, obj->orig_dev)) return -EOPNOTSUPP; err = dsa_slave_vlan_add(dev, obj, extack); But it seems that the bridge is able to trick us. The __vlan_vid_add from br_vlan.c has: /* Try switchdev op first. In case it is not supported, fallback to * 8021q add. */ err = br_switchdev_port_vlan_add(dev, v->vid, flags, extack); if (err == -EOPNOTSUPP) return vlan_vid_add(dev, br->vlan_proto, v->vid); So it says "no, no, you need this VLAN in your life!". And we, naive as we are, say "oh, this comes from the vlan_vid_add code path, it must be an 8021q upper, sure, I'll take that". And we end up with that bridge VLAN installed on our port anyway. But this time, it has the wrong flags: if the bridge was trying to install VLAN 1 as a pvid/untagged VLAN, failed via switchdev, retried via vlan_vid_add, we have this comment: /* This API only allows programming tagged, non-PVID VIDs */ So what we do makes absolutely no sense. Backtracing a bit, we see the common pattern. We allow the network stack to think that our standalone ports are VLAN-aware, but they aren't, for the vast majority of switches. The quirky ones should not dictate the norm. The dsa_slave_vlan_rx_add_vid and dsa_slave_vlan_rx_kill_vid methods exist for drivers that need the 'rx-vlan-filter: on' feature in ethtool -k, which can be due to any of the following reasons: 1. vlan_filtering_is_global = true, and some ports are under a VLAN-aware bridge while others are standalone, and the standalone ports would otherwise drop VLAN-tagged traffic. This is described in commit 061f6a505ac3 ("net: dsa: Add ndo_vlan_rx_{add, kill}_vid implementation"). 2. the ports that are under a VLAN-aware bridge should also set this feature, for 8021q uppers having a VID not claimed by the bridge. In this case, the driver will essentially not even know that the VID is coming from the 8021q layer and not the bridge. 3. Hellcreek. This driver needs it because in standalone mode, it uses unique VLANs per port to ensure separation. For separation of untagged traffic, it uses different PVIDs for each port, and for separation of VLAN-tagged traffic, it never accepts 8021q uppers with the same vid on two ports. If a driver does not fall under any of the above 3 categories, there is no reason why it should advertise the 'rx-vlan-filter' feature, therefore no reason why it should offload the VLANs added through vlan_vid_add. This commit fixes the problem by removing the 'rx-vlan-filter' feature from the slave devices when they operate in standalone mode, and when they offload a VLAN-unaware bridge. The way it works is that vlan_vid_add will now stop its processing here: vlan_add_rx_filter_info: if (!vlan_hw_filter_capable(dev, proto)) return 0; So the VLAN will still be saved in the interface's VLAN RX filtering list, but because it does not declare VLAN filtering in its features, the 8021q module will return zero without committing that VLAN to hardware. This gives the drivers what they want, since it keeps the 8021q VLANs away from the VLAN table until VLAN awareness is enabled (point at which the ports are no longer standalone, hence in the mv88e6xxx case, the check in mv88e6xxx_port_vlan_prepare passes). Since the issue predates the existence of the hellcreek driver, case 3 will be dealt with in a separate patch. The main change that this patch makes is to no longer set NETIF_F_HW_VLAN_CTAG_FILTER unconditionally, but toggle it dynamically (for most switches, never). The second part of the patch addresses an issue that the first part introduces: because the 'rx-vlan-filter' feature is now dynamically toggled, and our .ndo_vlan_rx_add_vid does not get called when 'rx-vlan-filter' is off, we need to avoid bugs such as the following by replaying the VLANs from 8021q uppers every time we enable VLAN filtering: ip link add link lan0 name lan0.100 type vlan id 100 ip addr add 192.168.100.1/24 dev lan0.100 ping 192.168.100.2 # should work ip link add br0 type bridge vlan_filtering 0 ip link set lan0 master br0 ping 192.168.100.2 # should still work ip link set br0 type bridge vlan_filtering 1 ping 192.168.100.2 # should still work but doesn't As reported by Florian, some drivers look at ds->vlan_filtering in their .port_vlan_add() implementation. So this patch also makes sure that ds->vlan_filtering is committed before calling the driver. This is the reason why it is first committed, then restored on the failure path. Reported-by: Tobias Waldekranz <tobias@waldekranz.com> Reported-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-23 21:22:57 +00:00
{
int err;
if (vlan_filtering) {
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
user->features |= NETIF_F_HW_VLAN_CTAG_FILTER;
net: dsa: don't advertise 'rx-vlan-filter' when not needed There have been multiple independent reports about dsa_slave_vlan_rx_add_vid being called (and consequently calling the drivers' .port_vlan_add) when it isn't needed, and sometimes (not always) causing problems in the process. Case 1: mv88e6xxx_port_vlan_prepare is stubborn and only accepts VLANs on bridged ports. That is understandably so, because standalone mv88e6xxx ports are VLAN-unaware, and VTU entries are said to be a scarce resource. Otherwise said, the following fails lamentably on mv88e6xxx: ip link add br0 type bridge vlan_filtering 1 ip link set lan3 master br0 ip link add link lan10 name lan10.1 type vlan id 1 [485256.724147] mv88e6085 d0032004.mdio-mii:12: p10: hw VLAN 1 already used by port 3 in br0 RTNETLINK answers: Operation not supported This has become a worse issue since commit 9b236d2a69da ("net: dsa: Advertise the VLAN offload netdev ability only if switch supports it"). Up to that point, the driver was returning -EOPNOTSUPP and DSA was reconverting that error to 0, making the 8021q upper think all is ok (but obviously the error message was there even prior to this change). After that change the -EOPNOTSUPP is propagated to vlan_vid_add, and it is a hard error. Case 2: Ports that don't offload the Linux bridge (have a dp->bridge_dev = NULL because they don't implement .port_bridge_{join,leave}). Understandably, a standalone port should not offload VLANs either, it should remain VLAN unaware and any VLAN should be a software VLAN (as long as the hardware is not quirky, that is). In fact, dsa_slave_port_obj_add does do the right thing and rejects switchdev VLAN objects coming from the bridge when that bridge is not offloaded: case SWITCHDEV_OBJ_ID_PORT_VLAN: if (!dsa_port_offloads_bridge_port(dp, obj->orig_dev)) return -EOPNOTSUPP; err = dsa_slave_vlan_add(dev, obj, extack); But it seems that the bridge is able to trick us. The __vlan_vid_add from br_vlan.c has: /* Try switchdev op first. In case it is not supported, fallback to * 8021q add. */ err = br_switchdev_port_vlan_add(dev, v->vid, flags, extack); if (err == -EOPNOTSUPP) return vlan_vid_add(dev, br->vlan_proto, v->vid); So it says "no, no, you need this VLAN in your life!". And we, naive as we are, say "oh, this comes from the vlan_vid_add code path, it must be an 8021q upper, sure, I'll take that". And we end up with that bridge VLAN installed on our port anyway. But this time, it has the wrong flags: if the bridge was trying to install VLAN 1 as a pvid/untagged VLAN, failed via switchdev, retried via vlan_vid_add, we have this comment: /* This API only allows programming tagged, non-PVID VIDs */ So what we do makes absolutely no sense. Backtracing a bit, we see the common pattern. We allow the network stack to think that our standalone ports are VLAN-aware, but they aren't, for the vast majority of switches. The quirky ones should not dictate the norm. The dsa_slave_vlan_rx_add_vid and dsa_slave_vlan_rx_kill_vid methods exist for drivers that need the 'rx-vlan-filter: on' feature in ethtool -k, which can be due to any of the following reasons: 1. vlan_filtering_is_global = true, and some ports are under a VLAN-aware bridge while others are standalone, and the standalone ports would otherwise drop VLAN-tagged traffic. This is described in commit 061f6a505ac3 ("net: dsa: Add ndo_vlan_rx_{add, kill}_vid implementation"). 2. the ports that are under a VLAN-aware bridge should also set this feature, for 8021q uppers having a VID not claimed by the bridge. In this case, the driver will essentially not even know that the VID is coming from the 8021q layer and not the bridge. 3. Hellcreek. This driver needs it because in standalone mode, it uses unique VLANs per port to ensure separation. For separation of untagged traffic, it uses different PVIDs for each port, and for separation of VLAN-tagged traffic, it never accepts 8021q uppers with the same vid on two ports. If a driver does not fall under any of the above 3 categories, there is no reason why it should advertise the 'rx-vlan-filter' feature, therefore no reason why it should offload the VLANs added through vlan_vid_add. This commit fixes the problem by removing the 'rx-vlan-filter' feature from the slave devices when they operate in standalone mode, and when they offload a VLAN-unaware bridge. The way it works is that vlan_vid_add will now stop its processing here: vlan_add_rx_filter_info: if (!vlan_hw_filter_capable(dev, proto)) return 0; So the VLAN will still be saved in the interface's VLAN RX filtering list, but because it does not declare VLAN filtering in its features, the 8021q module will return zero without committing that VLAN to hardware. This gives the drivers what they want, since it keeps the 8021q VLANs away from the VLAN table until VLAN awareness is enabled (point at which the ports are no longer standalone, hence in the mv88e6xxx case, the check in mv88e6xxx_port_vlan_prepare passes). Since the issue predates the existence of the hellcreek driver, case 3 will be dealt with in a separate patch. The main change that this patch makes is to no longer set NETIF_F_HW_VLAN_CTAG_FILTER unconditionally, but toggle it dynamically (for most switches, never). The second part of the patch addresses an issue that the first part introduces: because the 'rx-vlan-filter' feature is now dynamically toggled, and our .ndo_vlan_rx_add_vid does not get called when 'rx-vlan-filter' is off, we need to avoid bugs such as the following by replaying the VLANs from 8021q uppers every time we enable VLAN filtering: ip link add link lan0 name lan0.100 type vlan id 100 ip addr add 192.168.100.1/24 dev lan0.100 ping 192.168.100.2 # should work ip link add br0 type bridge vlan_filtering 0 ip link set lan0 master br0 ping 192.168.100.2 # should still work ip link set br0 type bridge vlan_filtering 1 ping 192.168.100.2 # should still work but doesn't As reported by Florian, some drivers look at ds->vlan_filtering in their .port_vlan_add() implementation. So this patch also makes sure that ds->vlan_filtering is committed before calling the driver. This is the reason why it is first committed, then restored on the failure path. Reported-by: Tobias Waldekranz <tobias@waldekranz.com> Reported-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-23 21:22:57 +00:00
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
err = vlan_for_each(user, dsa_user_restore_vlan, user);
net: dsa: don't advertise 'rx-vlan-filter' when not needed There have been multiple independent reports about dsa_slave_vlan_rx_add_vid being called (and consequently calling the drivers' .port_vlan_add) when it isn't needed, and sometimes (not always) causing problems in the process. Case 1: mv88e6xxx_port_vlan_prepare is stubborn and only accepts VLANs on bridged ports. That is understandably so, because standalone mv88e6xxx ports are VLAN-unaware, and VTU entries are said to be a scarce resource. Otherwise said, the following fails lamentably on mv88e6xxx: ip link add br0 type bridge vlan_filtering 1 ip link set lan3 master br0 ip link add link lan10 name lan10.1 type vlan id 1 [485256.724147] mv88e6085 d0032004.mdio-mii:12: p10: hw VLAN 1 already used by port 3 in br0 RTNETLINK answers: Operation not supported This has become a worse issue since commit 9b236d2a69da ("net: dsa: Advertise the VLAN offload netdev ability only if switch supports it"). Up to that point, the driver was returning -EOPNOTSUPP and DSA was reconverting that error to 0, making the 8021q upper think all is ok (but obviously the error message was there even prior to this change). After that change the -EOPNOTSUPP is propagated to vlan_vid_add, and it is a hard error. Case 2: Ports that don't offload the Linux bridge (have a dp->bridge_dev = NULL because they don't implement .port_bridge_{join,leave}). Understandably, a standalone port should not offload VLANs either, it should remain VLAN unaware and any VLAN should be a software VLAN (as long as the hardware is not quirky, that is). In fact, dsa_slave_port_obj_add does do the right thing and rejects switchdev VLAN objects coming from the bridge when that bridge is not offloaded: case SWITCHDEV_OBJ_ID_PORT_VLAN: if (!dsa_port_offloads_bridge_port(dp, obj->orig_dev)) return -EOPNOTSUPP; err = dsa_slave_vlan_add(dev, obj, extack); But it seems that the bridge is able to trick us. The __vlan_vid_add from br_vlan.c has: /* Try switchdev op first. In case it is not supported, fallback to * 8021q add. */ err = br_switchdev_port_vlan_add(dev, v->vid, flags, extack); if (err == -EOPNOTSUPP) return vlan_vid_add(dev, br->vlan_proto, v->vid); So it says "no, no, you need this VLAN in your life!". And we, naive as we are, say "oh, this comes from the vlan_vid_add code path, it must be an 8021q upper, sure, I'll take that". And we end up with that bridge VLAN installed on our port anyway. But this time, it has the wrong flags: if the bridge was trying to install VLAN 1 as a pvid/untagged VLAN, failed via switchdev, retried via vlan_vid_add, we have this comment: /* This API only allows programming tagged, non-PVID VIDs */ So what we do makes absolutely no sense. Backtracing a bit, we see the common pattern. We allow the network stack to think that our standalone ports are VLAN-aware, but they aren't, for the vast majority of switches. The quirky ones should not dictate the norm. The dsa_slave_vlan_rx_add_vid and dsa_slave_vlan_rx_kill_vid methods exist for drivers that need the 'rx-vlan-filter: on' feature in ethtool -k, which can be due to any of the following reasons: 1. vlan_filtering_is_global = true, and some ports are under a VLAN-aware bridge while others are standalone, and the standalone ports would otherwise drop VLAN-tagged traffic. This is described in commit 061f6a505ac3 ("net: dsa: Add ndo_vlan_rx_{add, kill}_vid implementation"). 2. the ports that are under a VLAN-aware bridge should also set this feature, for 8021q uppers having a VID not claimed by the bridge. In this case, the driver will essentially not even know that the VID is coming from the 8021q layer and not the bridge. 3. Hellcreek. This driver needs it because in standalone mode, it uses unique VLANs per port to ensure separation. For separation of untagged traffic, it uses different PVIDs for each port, and for separation of VLAN-tagged traffic, it never accepts 8021q uppers with the same vid on two ports. If a driver does not fall under any of the above 3 categories, there is no reason why it should advertise the 'rx-vlan-filter' feature, therefore no reason why it should offload the VLANs added through vlan_vid_add. This commit fixes the problem by removing the 'rx-vlan-filter' feature from the slave devices when they operate in standalone mode, and when they offload a VLAN-unaware bridge. The way it works is that vlan_vid_add will now stop its processing here: vlan_add_rx_filter_info: if (!vlan_hw_filter_capable(dev, proto)) return 0; So the VLAN will still be saved in the interface's VLAN RX filtering list, but because it does not declare VLAN filtering in its features, the 8021q module will return zero without committing that VLAN to hardware. This gives the drivers what they want, since it keeps the 8021q VLANs away from the VLAN table until VLAN awareness is enabled (point at which the ports are no longer standalone, hence in the mv88e6xxx case, the check in mv88e6xxx_port_vlan_prepare passes). Since the issue predates the existence of the hellcreek driver, case 3 will be dealt with in a separate patch. The main change that this patch makes is to no longer set NETIF_F_HW_VLAN_CTAG_FILTER unconditionally, but toggle it dynamically (for most switches, never). The second part of the patch addresses an issue that the first part introduces: because the 'rx-vlan-filter' feature is now dynamically toggled, and our .ndo_vlan_rx_add_vid does not get called when 'rx-vlan-filter' is off, we need to avoid bugs such as the following by replaying the VLANs from 8021q uppers every time we enable VLAN filtering: ip link add link lan0 name lan0.100 type vlan id 100 ip addr add 192.168.100.1/24 dev lan0.100 ping 192.168.100.2 # should work ip link add br0 type bridge vlan_filtering 0 ip link set lan0 master br0 ping 192.168.100.2 # should still work ip link set br0 type bridge vlan_filtering 1 ping 192.168.100.2 # should still work but doesn't As reported by Florian, some drivers look at ds->vlan_filtering in their .port_vlan_add() implementation. So this patch also makes sure that ds->vlan_filtering is committed before calling the driver. This is the reason why it is first committed, then restored on the failure path. Reported-by: Tobias Waldekranz <tobias@waldekranz.com> Reported-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-23 21:22:57 +00:00
if (err) {
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
vlan_for_each(user, dsa_user_clear_vlan, user);
user->features &= ~NETIF_F_HW_VLAN_CTAG_FILTER;
net: dsa: don't advertise 'rx-vlan-filter' when not needed There have been multiple independent reports about dsa_slave_vlan_rx_add_vid being called (and consequently calling the drivers' .port_vlan_add) when it isn't needed, and sometimes (not always) causing problems in the process. Case 1: mv88e6xxx_port_vlan_prepare is stubborn and only accepts VLANs on bridged ports. That is understandably so, because standalone mv88e6xxx ports are VLAN-unaware, and VTU entries are said to be a scarce resource. Otherwise said, the following fails lamentably on mv88e6xxx: ip link add br0 type bridge vlan_filtering 1 ip link set lan3 master br0 ip link add link lan10 name lan10.1 type vlan id 1 [485256.724147] mv88e6085 d0032004.mdio-mii:12: p10: hw VLAN 1 already used by port 3 in br0 RTNETLINK answers: Operation not supported This has become a worse issue since commit 9b236d2a69da ("net: dsa: Advertise the VLAN offload netdev ability only if switch supports it"). Up to that point, the driver was returning -EOPNOTSUPP and DSA was reconverting that error to 0, making the 8021q upper think all is ok (but obviously the error message was there even prior to this change). After that change the -EOPNOTSUPP is propagated to vlan_vid_add, and it is a hard error. Case 2: Ports that don't offload the Linux bridge (have a dp->bridge_dev = NULL because they don't implement .port_bridge_{join,leave}). Understandably, a standalone port should not offload VLANs either, it should remain VLAN unaware and any VLAN should be a software VLAN (as long as the hardware is not quirky, that is). In fact, dsa_slave_port_obj_add does do the right thing and rejects switchdev VLAN objects coming from the bridge when that bridge is not offloaded: case SWITCHDEV_OBJ_ID_PORT_VLAN: if (!dsa_port_offloads_bridge_port(dp, obj->orig_dev)) return -EOPNOTSUPP; err = dsa_slave_vlan_add(dev, obj, extack); But it seems that the bridge is able to trick us. The __vlan_vid_add from br_vlan.c has: /* Try switchdev op first. In case it is not supported, fallback to * 8021q add. */ err = br_switchdev_port_vlan_add(dev, v->vid, flags, extack); if (err == -EOPNOTSUPP) return vlan_vid_add(dev, br->vlan_proto, v->vid); So it says "no, no, you need this VLAN in your life!". And we, naive as we are, say "oh, this comes from the vlan_vid_add code path, it must be an 8021q upper, sure, I'll take that". And we end up with that bridge VLAN installed on our port anyway. But this time, it has the wrong flags: if the bridge was trying to install VLAN 1 as a pvid/untagged VLAN, failed via switchdev, retried via vlan_vid_add, we have this comment: /* This API only allows programming tagged, non-PVID VIDs */ So what we do makes absolutely no sense. Backtracing a bit, we see the common pattern. We allow the network stack to think that our standalone ports are VLAN-aware, but they aren't, for the vast majority of switches. The quirky ones should not dictate the norm. The dsa_slave_vlan_rx_add_vid and dsa_slave_vlan_rx_kill_vid methods exist for drivers that need the 'rx-vlan-filter: on' feature in ethtool -k, which can be due to any of the following reasons: 1. vlan_filtering_is_global = true, and some ports are under a VLAN-aware bridge while others are standalone, and the standalone ports would otherwise drop VLAN-tagged traffic. This is described in commit 061f6a505ac3 ("net: dsa: Add ndo_vlan_rx_{add, kill}_vid implementation"). 2. the ports that are under a VLAN-aware bridge should also set this feature, for 8021q uppers having a VID not claimed by the bridge. In this case, the driver will essentially not even know that the VID is coming from the 8021q layer and not the bridge. 3. Hellcreek. This driver needs it because in standalone mode, it uses unique VLANs per port to ensure separation. For separation of untagged traffic, it uses different PVIDs for each port, and for separation of VLAN-tagged traffic, it never accepts 8021q uppers with the same vid on two ports. If a driver does not fall under any of the above 3 categories, there is no reason why it should advertise the 'rx-vlan-filter' feature, therefore no reason why it should offload the VLANs added through vlan_vid_add. This commit fixes the problem by removing the 'rx-vlan-filter' feature from the slave devices when they operate in standalone mode, and when they offload a VLAN-unaware bridge. The way it works is that vlan_vid_add will now stop its processing here: vlan_add_rx_filter_info: if (!vlan_hw_filter_capable(dev, proto)) return 0; So the VLAN will still be saved in the interface's VLAN RX filtering list, but because it does not declare VLAN filtering in its features, the 8021q module will return zero without committing that VLAN to hardware. This gives the drivers what they want, since it keeps the 8021q VLANs away from the VLAN table until VLAN awareness is enabled (point at which the ports are no longer standalone, hence in the mv88e6xxx case, the check in mv88e6xxx_port_vlan_prepare passes). Since the issue predates the existence of the hellcreek driver, case 3 will be dealt with in a separate patch. The main change that this patch makes is to no longer set NETIF_F_HW_VLAN_CTAG_FILTER unconditionally, but toggle it dynamically (for most switches, never). The second part of the patch addresses an issue that the first part introduces: because the 'rx-vlan-filter' feature is now dynamically toggled, and our .ndo_vlan_rx_add_vid does not get called when 'rx-vlan-filter' is off, we need to avoid bugs such as the following by replaying the VLANs from 8021q uppers every time we enable VLAN filtering: ip link add link lan0 name lan0.100 type vlan id 100 ip addr add 192.168.100.1/24 dev lan0.100 ping 192.168.100.2 # should work ip link add br0 type bridge vlan_filtering 0 ip link set lan0 master br0 ping 192.168.100.2 # should still work ip link set br0 type bridge vlan_filtering 1 ping 192.168.100.2 # should still work but doesn't As reported by Florian, some drivers look at ds->vlan_filtering in their .port_vlan_add() implementation. So this patch also makes sure that ds->vlan_filtering is committed before calling the driver. This is the reason why it is first committed, then restored on the failure path. Reported-by: Tobias Waldekranz <tobias@waldekranz.com> Reported-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-23 21:22:57 +00:00
return err;
}
} else {
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
err = vlan_for_each(user, dsa_user_clear_vlan, user);
net: dsa: don't advertise 'rx-vlan-filter' when not needed There have been multiple independent reports about dsa_slave_vlan_rx_add_vid being called (and consequently calling the drivers' .port_vlan_add) when it isn't needed, and sometimes (not always) causing problems in the process. Case 1: mv88e6xxx_port_vlan_prepare is stubborn and only accepts VLANs on bridged ports. That is understandably so, because standalone mv88e6xxx ports are VLAN-unaware, and VTU entries are said to be a scarce resource. Otherwise said, the following fails lamentably on mv88e6xxx: ip link add br0 type bridge vlan_filtering 1 ip link set lan3 master br0 ip link add link lan10 name lan10.1 type vlan id 1 [485256.724147] mv88e6085 d0032004.mdio-mii:12: p10: hw VLAN 1 already used by port 3 in br0 RTNETLINK answers: Operation not supported This has become a worse issue since commit 9b236d2a69da ("net: dsa: Advertise the VLAN offload netdev ability only if switch supports it"). Up to that point, the driver was returning -EOPNOTSUPP and DSA was reconverting that error to 0, making the 8021q upper think all is ok (but obviously the error message was there even prior to this change). After that change the -EOPNOTSUPP is propagated to vlan_vid_add, and it is a hard error. Case 2: Ports that don't offload the Linux bridge (have a dp->bridge_dev = NULL because they don't implement .port_bridge_{join,leave}). Understandably, a standalone port should not offload VLANs either, it should remain VLAN unaware and any VLAN should be a software VLAN (as long as the hardware is not quirky, that is). In fact, dsa_slave_port_obj_add does do the right thing and rejects switchdev VLAN objects coming from the bridge when that bridge is not offloaded: case SWITCHDEV_OBJ_ID_PORT_VLAN: if (!dsa_port_offloads_bridge_port(dp, obj->orig_dev)) return -EOPNOTSUPP; err = dsa_slave_vlan_add(dev, obj, extack); But it seems that the bridge is able to trick us. The __vlan_vid_add from br_vlan.c has: /* Try switchdev op first. In case it is not supported, fallback to * 8021q add. */ err = br_switchdev_port_vlan_add(dev, v->vid, flags, extack); if (err == -EOPNOTSUPP) return vlan_vid_add(dev, br->vlan_proto, v->vid); So it says "no, no, you need this VLAN in your life!". And we, naive as we are, say "oh, this comes from the vlan_vid_add code path, it must be an 8021q upper, sure, I'll take that". And we end up with that bridge VLAN installed on our port anyway. But this time, it has the wrong flags: if the bridge was trying to install VLAN 1 as a pvid/untagged VLAN, failed via switchdev, retried via vlan_vid_add, we have this comment: /* This API only allows programming tagged, non-PVID VIDs */ So what we do makes absolutely no sense. Backtracing a bit, we see the common pattern. We allow the network stack to think that our standalone ports are VLAN-aware, but they aren't, for the vast majority of switches. The quirky ones should not dictate the norm. The dsa_slave_vlan_rx_add_vid and dsa_slave_vlan_rx_kill_vid methods exist for drivers that need the 'rx-vlan-filter: on' feature in ethtool -k, which can be due to any of the following reasons: 1. vlan_filtering_is_global = true, and some ports are under a VLAN-aware bridge while others are standalone, and the standalone ports would otherwise drop VLAN-tagged traffic. This is described in commit 061f6a505ac3 ("net: dsa: Add ndo_vlan_rx_{add, kill}_vid implementation"). 2. the ports that are under a VLAN-aware bridge should also set this feature, for 8021q uppers having a VID not claimed by the bridge. In this case, the driver will essentially not even know that the VID is coming from the 8021q layer and not the bridge. 3. Hellcreek. This driver needs it because in standalone mode, it uses unique VLANs per port to ensure separation. For separation of untagged traffic, it uses different PVIDs for each port, and for separation of VLAN-tagged traffic, it never accepts 8021q uppers with the same vid on two ports. If a driver does not fall under any of the above 3 categories, there is no reason why it should advertise the 'rx-vlan-filter' feature, therefore no reason why it should offload the VLANs added through vlan_vid_add. This commit fixes the problem by removing the 'rx-vlan-filter' feature from the slave devices when they operate in standalone mode, and when they offload a VLAN-unaware bridge. The way it works is that vlan_vid_add will now stop its processing here: vlan_add_rx_filter_info: if (!vlan_hw_filter_capable(dev, proto)) return 0; So the VLAN will still be saved in the interface's VLAN RX filtering list, but because it does not declare VLAN filtering in its features, the 8021q module will return zero without committing that VLAN to hardware. This gives the drivers what they want, since it keeps the 8021q VLANs away from the VLAN table until VLAN awareness is enabled (point at which the ports are no longer standalone, hence in the mv88e6xxx case, the check in mv88e6xxx_port_vlan_prepare passes). Since the issue predates the existence of the hellcreek driver, case 3 will be dealt with in a separate patch. The main change that this patch makes is to no longer set NETIF_F_HW_VLAN_CTAG_FILTER unconditionally, but toggle it dynamically (for most switches, never). The second part of the patch addresses an issue that the first part introduces: because the 'rx-vlan-filter' feature is now dynamically toggled, and our .ndo_vlan_rx_add_vid does not get called when 'rx-vlan-filter' is off, we need to avoid bugs such as the following by replaying the VLANs from 8021q uppers every time we enable VLAN filtering: ip link add link lan0 name lan0.100 type vlan id 100 ip addr add 192.168.100.1/24 dev lan0.100 ping 192.168.100.2 # should work ip link add br0 type bridge vlan_filtering 0 ip link set lan0 master br0 ping 192.168.100.2 # should still work ip link set br0 type bridge vlan_filtering 1 ping 192.168.100.2 # should still work but doesn't As reported by Florian, some drivers look at ds->vlan_filtering in their .port_vlan_add() implementation. So this patch also makes sure that ds->vlan_filtering is committed before calling the driver. This is the reason why it is first committed, then restored on the failure path. Reported-by: Tobias Waldekranz <tobias@waldekranz.com> Reported-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-23 21:22:57 +00:00
if (err)
return err;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
user->features &= ~NETIF_F_HW_VLAN_CTAG_FILTER;
net: dsa: don't advertise 'rx-vlan-filter' when not needed There have been multiple independent reports about dsa_slave_vlan_rx_add_vid being called (and consequently calling the drivers' .port_vlan_add) when it isn't needed, and sometimes (not always) causing problems in the process. Case 1: mv88e6xxx_port_vlan_prepare is stubborn and only accepts VLANs on bridged ports. That is understandably so, because standalone mv88e6xxx ports are VLAN-unaware, and VTU entries are said to be a scarce resource. Otherwise said, the following fails lamentably on mv88e6xxx: ip link add br0 type bridge vlan_filtering 1 ip link set lan3 master br0 ip link add link lan10 name lan10.1 type vlan id 1 [485256.724147] mv88e6085 d0032004.mdio-mii:12: p10: hw VLAN 1 already used by port 3 in br0 RTNETLINK answers: Operation not supported This has become a worse issue since commit 9b236d2a69da ("net: dsa: Advertise the VLAN offload netdev ability only if switch supports it"). Up to that point, the driver was returning -EOPNOTSUPP and DSA was reconverting that error to 0, making the 8021q upper think all is ok (but obviously the error message was there even prior to this change). After that change the -EOPNOTSUPP is propagated to vlan_vid_add, and it is a hard error. Case 2: Ports that don't offload the Linux bridge (have a dp->bridge_dev = NULL because they don't implement .port_bridge_{join,leave}). Understandably, a standalone port should not offload VLANs either, it should remain VLAN unaware and any VLAN should be a software VLAN (as long as the hardware is not quirky, that is). In fact, dsa_slave_port_obj_add does do the right thing and rejects switchdev VLAN objects coming from the bridge when that bridge is not offloaded: case SWITCHDEV_OBJ_ID_PORT_VLAN: if (!dsa_port_offloads_bridge_port(dp, obj->orig_dev)) return -EOPNOTSUPP; err = dsa_slave_vlan_add(dev, obj, extack); But it seems that the bridge is able to trick us. The __vlan_vid_add from br_vlan.c has: /* Try switchdev op first. In case it is not supported, fallback to * 8021q add. */ err = br_switchdev_port_vlan_add(dev, v->vid, flags, extack); if (err == -EOPNOTSUPP) return vlan_vid_add(dev, br->vlan_proto, v->vid); So it says "no, no, you need this VLAN in your life!". And we, naive as we are, say "oh, this comes from the vlan_vid_add code path, it must be an 8021q upper, sure, I'll take that". And we end up with that bridge VLAN installed on our port anyway. But this time, it has the wrong flags: if the bridge was trying to install VLAN 1 as a pvid/untagged VLAN, failed via switchdev, retried via vlan_vid_add, we have this comment: /* This API only allows programming tagged, non-PVID VIDs */ So what we do makes absolutely no sense. Backtracing a bit, we see the common pattern. We allow the network stack to think that our standalone ports are VLAN-aware, but they aren't, for the vast majority of switches. The quirky ones should not dictate the norm. The dsa_slave_vlan_rx_add_vid and dsa_slave_vlan_rx_kill_vid methods exist for drivers that need the 'rx-vlan-filter: on' feature in ethtool -k, which can be due to any of the following reasons: 1. vlan_filtering_is_global = true, and some ports are under a VLAN-aware bridge while others are standalone, and the standalone ports would otherwise drop VLAN-tagged traffic. This is described in commit 061f6a505ac3 ("net: dsa: Add ndo_vlan_rx_{add, kill}_vid implementation"). 2. the ports that are under a VLAN-aware bridge should also set this feature, for 8021q uppers having a VID not claimed by the bridge. In this case, the driver will essentially not even know that the VID is coming from the 8021q layer and not the bridge. 3. Hellcreek. This driver needs it because in standalone mode, it uses unique VLANs per port to ensure separation. For separation of untagged traffic, it uses different PVIDs for each port, and for separation of VLAN-tagged traffic, it never accepts 8021q uppers with the same vid on two ports. If a driver does not fall under any of the above 3 categories, there is no reason why it should advertise the 'rx-vlan-filter' feature, therefore no reason why it should offload the VLANs added through vlan_vid_add. This commit fixes the problem by removing the 'rx-vlan-filter' feature from the slave devices when they operate in standalone mode, and when they offload a VLAN-unaware bridge. The way it works is that vlan_vid_add will now stop its processing here: vlan_add_rx_filter_info: if (!vlan_hw_filter_capable(dev, proto)) return 0; So the VLAN will still be saved in the interface's VLAN RX filtering list, but because it does not declare VLAN filtering in its features, the 8021q module will return zero without committing that VLAN to hardware. This gives the drivers what they want, since it keeps the 8021q VLANs away from the VLAN table until VLAN awareness is enabled (point at which the ports are no longer standalone, hence in the mv88e6xxx case, the check in mv88e6xxx_port_vlan_prepare passes). Since the issue predates the existence of the hellcreek driver, case 3 will be dealt with in a separate patch. The main change that this patch makes is to no longer set NETIF_F_HW_VLAN_CTAG_FILTER unconditionally, but toggle it dynamically (for most switches, never). The second part of the patch addresses an issue that the first part introduces: because the 'rx-vlan-filter' feature is now dynamically toggled, and our .ndo_vlan_rx_add_vid does not get called when 'rx-vlan-filter' is off, we need to avoid bugs such as the following by replaying the VLANs from 8021q uppers every time we enable VLAN filtering: ip link add link lan0 name lan0.100 type vlan id 100 ip addr add 192.168.100.1/24 dev lan0.100 ping 192.168.100.2 # should work ip link add br0 type bridge vlan_filtering 0 ip link set lan0 master br0 ping 192.168.100.2 # should still work ip link set br0 type bridge vlan_filtering 1 ping 192.168.100.2 # should still work but doesn't As reported by Florian, some drivers look at ds->vlan_filtering in their .port_vlan_add() implementation. So this patch also makes sure that ds->vlan_filtering is committed before calling the driver. This is the reason why it is first committed, then restored on the failure path. Reported-by: Tobias Waldekranz <tobias@waldekranz.com> Reported-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-23 21:22:57 +00:00
}
return 0;
}
net: dsa: implement auto-normalization of MTU for bridge hardware datapath Many switches don't have an explicit knob for configuring the MTU (maximum transmission unit per interface). Instead, they do the length-based packet admission checks on the ingress interface, for reasons that are easy to understand (why would you accept a packet in the queuing subsystem if you know you're going to drop it anyway). So it is actually the MRU that these switches permit configuring. In Linux there only exists the IFLA_MTU netlink attribute and the associated dev_set_mtu function. The comments like to play blind and say that it's changing the "maximum transfer unit", which is to say that there isn't any directionality in the meaning of the MTU word. So that is the interpretation that this patch is giving to things: MTU == MRU. When 2 interfaces having different MTUs are bridged, the bridge driver MTU auto-adjustment logic kicks in: what br_mtu_auto_adjust() does is it adjusts the MTU of the bridge net device itself (and not that of the slave net devices) to the minimum value of all slave interfaces, in order for forwarded packets to not exceed the MTU regardless of the interface they are received and send on. The idea behind this behavior, and why the slave MTUs are not adjusted, is that normal termination from Linux over the L2 forwarding domain should happen over the bridge net device, which _is_ properly limited by the minimum MTU. And termination over individual slave devices is possible even if those are bridged. But that is not "forwarding", so there's no reason to do normalization there, since only a single interface sees that packet. The problem with those switches that can only control the MRU is with the offloaded data path, where a packet received on an interface with MRU 9000 would still be forwarded to an interface with MRU 1500. And the br_mtu_auto_adjust() function does not really help, since the MTU configured on the bridge net device is ignored. In order to enforce the de-facto MTU == MRU rule for these switches, we need to do MTU normalization, which means: in order for no packet larger than the MTU configured on this port to be sent, then we need to limit the MRU on all ports that this packet could possibly come from. AKA since we are configuring the MRU via MTU, it means that all ports within a bridge forwarding domain should have the same MTU. And that is exactly what this patch is trying to do. >From an implementation perspective, we try to follow the intent of the user, otherwise there is a risk that we might livelock them (they try to change the MTU on an already-bridged interface, but we just keep changing it back in an attempt to keep the MTU normalized). So the MTU that the bridge is normalized to is either: - The most recently changed one: ip link set dev swp0 master br0 ip link set dev swp1 master br0 ip link set dev swp0 mtu 1400 This sequence will make swp1 inherit MTU 1400 from swp0. - The one of the most recently added interface to the bridge: ip link set dev swp0 master br0 ip link set dev swp1 mtu 1400 ip link set dev swp1 master br0 The above sequence will make swp0 inherit MTU 1400 as well. Suggested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27 19:55:43 +00:00
struct dsa_hw_port {
struct list_head list;
struct net_device *dev;
int old_mtu;
};
static int dsa_hw_port_list_set_mtu(struct list_head *hw_port_list, int mtu)
{
const struct dsa_hw_port *p;
int err;
list_for_each_entry(p, hw_port_list, list) {
if (p->dev->mtu == mtu)
continue;
err = dev_set_mtu(p->dev, mtu);
if (err)
goto rollback;
}
return 0;
rollback:
list_for_each_entry_continue_reverse(p, hw_port_list, list) {
if (p->dev->mtu == p->old_mtu)
continue;
if (dev_set_mtu(p->dev, p->old_mtu))
netdev_err(p->dev, "Failed to restore MTU\n");
}
return err;
}
static void dsa_hw_port_list_free(struct list_head *hw_port_list)
{
struct dsa_hw_port *p, *n;
list_for_each_entry_safe(p, n, hw_port_list, list)
kfree(p);
}
/* Make the hardware datapath to/from @dev limited to a common MTU */
net: dsa: dsa_bridge_mtu_normalization() can be static Fixes: f41071407c85 ("net: dsa: implement auto-normalization of MTU for bridge hardware datapath") Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-02 01:25:48 +00:00
static void dsa_bridge_mtu_normalization(struct dsa_port *dp)
net: dsa: implement auto-normalization of MTU for bridge hardware datapath Many switches don't have an explicit knob for configuring the MTU (maximum transmission unit per interface). Instead, they do the length-based packet admission checks on the ingress interface, for reasons that are easy to understand (why would you accept a packet in the queuing subsystem if you know you're going to drop it anyway). So it is actually the MRU that these switches permit configuring. In Linux there only exists the IFLA_MTU netlink attribute and the associated dev_set_mtu function. The comments like to play blind and say that it's changing the "maximum transfer unit", which is to say that there isn't any directionality in the meaning of the MTU word. So that is the interpretation that this patch is giving to things: MTU == MRU. When 2 interfaces having different MTUs are bridged, the bridge driver MTU auto-adjustment logic kicks in: what br_mtu_auto_adjust() does is it adjusts the MTU of the bridge net device itself (and not that of the slave net devices) to the minimum value of all slave interfaces, in order for forwarded packets to not exceed the MTU regardless of the interface they are received and send on. The idea behind this behavior, and why the slave MTUs are not adjusted, is that normal termination from Linux over the L2 forwarding domain should happen over the bridge net device, which _is_ properly limited by the minimum MTU. And termination over individual slave devices is possible even if those are bridged. But that is not "forwarding", so there's no reason to do normalization there, since only a single interface sees that packet. The problem with those switches that can only control the MRU is with the offloaded data path, where a packet received on an interface with MRU 9000 would still be forwarded to an interface with MRU 1500. And the br_mtu_auto_adjust() function does not really help, since the MTU configured on the bridge net device is ignored. In order to enforce the de-facto MTU == MRU rule for these switches, we need to do MTU normalization, which means: in order for no packet larger than the MTU configured on this port to be sent, then we need to limit the MRU on all ports that this packet could possibly come from. AKA since we are configuring the MRU via MTU, it means that all ports within a bridge forwarding domain should have the same MTU. And that is exactly what this patch is trying to do. >From an implementation perspective, we try to follow the intent of the user, otherwise there is a risk that we might livelock them (they try to change the MTU on an already-bridged interface, but we just keep changing it back in an attempt to keep the MTU normalized). So the MTU that the bridge is normalized to is either: - The most recently changed one: ip link set dev swp0 master br0 ip link set dev swp1 master br0 ip link set dev swp0 mtu 1400 This sequence will make swp1 inherit MTU 1400 from swp0. - The one of the most recently added interface to the bridge: ip link set dev swp0 master br0 ip link set dev swp1 mtu 1400 ip link set dev swp1 master br0 The above sequence will make swp0 inherit MTU 1400 as well. Suggested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27 19:55:43 +00:00
{
struct list_head hw_port_list;
struct dsa_switch_tree *dst;
int min_mtu = ETH_MAX_MTU;
struct dsa_port *other_dp;
int err;
if (!dp->ds->mtu_enforcement_ingress)
return;
net: dsa: keep the bridge_dev and bridge_num as part of the same structure The main desire behind this is to provide coherent bridge information to the fast path without locking. For example, right now we set dp->bridge_dev and dp->bridge_num from separate code paths, it is theoretically possible for a packet transmission to read these two port properties consecutively and find a bridge number which does not correspond with the bridge device. Another desire is to start passing more complex bridge information to dsa_switch_ops functions. For example, with FDB isolation, it is expected that drivers will need to be passed the bridge which requested an FDB/MDB entry to be offloaded, and along with that bridge_dev, the associated bridge_num should be passed too, in case the driver might want to implement an isolation scheme based on that number. We already pass the {bridge_dev, bridge_num} pair to the TX forwarding offload switch API, however we'd like to remove that and squash it into the basic bridge join/leave API. So that means we need to pass this pair to the bridge join/leave API. During dsa_port_bridge_leave, first we unset dp->bridge_dev, then we call the driver's .port_bridge_leave with what used to be our dp->bridge_dev, but provided as an argument. When bridge_dev and bridge_num get folded into a single structure, we need to preserve this behavior in dsa_port_bridge_leave: we need a copy of what used to be in dp->bridge. Switch drivers check bridge membership by comparing dp->bridge_dev with the provided bridge_dev, but now, if we provide the struct dsa_bridge as a pointer, they cannot keep comparing dp->bridge to the provided pointer, since this only points to an on-stack copy. To make this obvious and prevent driver writers from forgetting and doing stupid things, in this new API, the struct dsa_bridge is provided as a full structure (not very large, contains an int and a pointer) instead of a pointer. An explicit comparison function needs to be used to determine bridge membership: dsa_port_offloads_bridge(). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-06 16:57:56 +00:00
if (!dp->bridge)
net: dsa: implement auto-normalization of MTU for bridge hardware datapath Many switches don't have an explicit knob for configuring the MTU (maximum transmission unit per interface). Instead, they do the length-based packet admission checks on the ingress interface, for reasons that are easy to understand (why would you accept a packet in the queuing subsystem if you know you're going to drop it anyway). So it is actually the MRU that these switches permit configuring. In Linux there only exists the IFLA_MTU netlink attribute and the associated dev_set_mtu function. The comments like to play blind and say that it's changing the "maximum transfer unit", which is to say that there isn't any directionality in the meaning of the MTU word. So that is the interpretation that this patch is giving to things: MTU == MRU. When 2 interfaces having different MTUs are bridged, the bridge driver MTU auto-adjustment logic kicks in: what br_mtu_auto_adjust() does is it adjusts the MTU of the bridge net device itself (and not that of the slave net devices) to the minimum value of all slave interfaces, in order for forwarded packets to not exceed the MTU regardless of the interface they are received and send on. The idea behind this behavior, and why the slave MTUs are not adjusted, is that normal termination from Linux over the L2 forwarding domain should happen over the bridge net device, which _is_ properly limited by the minimum MTU. And termination over individual slave devices is possible even if those are bridged. But that is not "forwarding", so there's no reason to do normalization there, since only a single interface sees that packet. The problem with those switches that can only control the MRU is with the offloaded data path, where a packet received on an interface with MRU 9000 would still be forwarded to an interface with MRU 1500. And the br_mtu_auto_adjust() function does not really help, since the MTU configured on the bridge net device is ignored. In order to enforce the de-facto MTU == MRU rule for these switches, we need to do MTU normalization, which means: in order for no packet larger than the MTU configured on this port to be sent, then we need to limit the MRU on all ports that this packet could possibly come from. AKA since we are configuring the MRU via MTU, it means that all ports within a bridge forwarding domain should have the same MTU. And that is exactly what this patch is trying to do. >From an implementation perspective, we try to follow the intent of the user, otherwise there is a risk that we might livelock them (they try to change the MTU on an already-bridged interface, but we just keep changing it back in an attempt to keep the MTU normalized). So the MTU that the bridge is normalized to is either: - The most recently changed one: ip link set dev swp0 master br0 ip link set dev swp1 master br0 ip link set dev swp0 mtu 1400 This sequence will make swp1 inherit MTU 1400 from swp0. - The one of the most recently added interface to the bridge: ip link set dev swp0 master br0 ip link set dev swp1 mtu 1400 ip link set dev swp1 master br0 The above sequence will make swp0 inherit MTU 1400 as well. Suggested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27 19:55:43 +00:00
return;
INIT_LIST_HEAD(&hw_port_list);
/* Populate the list of ports that are part of the same bridge
* as the newly added/modified port
*/
list_for_each_entry(dst, &dsa_tree_list, list) {
list_for_each_entry(other_dp, &dst->ports, list) {
struct dsa_hw_port *hw_port;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct net_device *user;
net: dsa: implement auto-normalization of MTU for bridge hardware datapath Many switches don't have an explicit knob for configuring the MTU (maximum transmission unit per interface). Instead, they do the length-based packet admission checks on the ingress interface, for reasons that are easy to understand (why would you accept a packet in the queuing subsystem if you know you're going to drop it anyway). So it is actually the MRU that these switches permit configuring. In Linux there only exists the IFLA_MTU netlink attribute and the associated dev_set_mtu function. The comments like to play blind and say that it's changing the "maximum transfer unit", which is to say that there isn't any directionality in the meaning of the MTU word. So that is the interpretation that this patch is giving to things: MTU == MRU. When 2 interfaces having different MTUs are bridged, the bridge driver MTU auto-adjustment logic kicks in: what br_mtu_auto_adjust() does is it adjusts the MTU of the bridge net device itself (and not that of the slave net devices) to the minimum value of all slave interfaces, in order for forwarded packets to not exceed the MTU regardless of the interface they are received and send on. The idea behind this behavior, and why the slave MTUs are not adjusted, is that normal termination from Linux over the L2 forwarding domain should happen over the bridge net device, which _is_ properly limited by the minimum MTU. And termination over individual slave devices is possible even if those are bridged. But that is not "forwarding", so there's no reason to do normalization there, since only a single interface sees that packet. The problem with those switches that can only control the MRU is with the offloaded data path, where a packet received on an interface with MRU 9000 would still be forwarded to an interface with MRU 1500. And the br_mtu_auto_adjust() function does not really help, since the MTU configured on the bridge net device is ignored. In order to enforce the de-facto MTU == MRU rule for these switches, we need to do MTU normalization, which means: in order for no packet larger than the MTU configured on this port to be sent, then we need to limit the MRU on all ports that this packet could possibly come from. AKA since we are configuring the MRU via MTU, it means that all ports within a bridge forwarding domain should have the same MTU. And that is exactly what this patch is trying to do. >From an implementation perspective, we try to follow the intent of the user, otherwise there is a risk that we might livelock them (they try to change the MTU on an already-bridged interface, but we just keep changing it back in an attempt to keep the MTU normalized). So the MTU that the bridge is normalized to is either: - The most recently changed one: ip link set dev swp0 master br0 ip link set dev swp1 master br0 ip link set dev swp0 mtu 1400 This sequence will make swp1 inherit MTU 1400 from swp0. - The one of the most recently added interface to the bridge: ip link set dev swp0 master br0 ip link set dev swp1 mtu 1400 ip link set dev swp1 master br0 The above sequence will make swp0 inherit MTU 1400 as well. Suggested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27 19:55:43 +00:00
if (other_dp->type != DSA_PORT_TYPE_USER)
continue;
net: dsa: hide dp->bridge_dev and dp->bridge_num in the core behind helpers The location of the bridge device pointer and number is going to change. It is not going to be kept individually per port, but in a common structure allocated dynamically and which will have lockdep validation. Create helpers to access these elements so that we have a migration path to the new organization. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-06 16:57:52 +00:00
if (!dsa_port_bridge_same(dp, other_dp))
net: dsa: implement auto-normalization of MTU for bridge hardware datapath Many switches don't have an explicit knob for configuring the MTU (maximum transmission unit per interface). Instead, they do the length-based packet admission checks on the ingress interface, for reasons that are easy to understand (why would you accept a packet in the queuing subsystem if you know you're going to drop it anyway). So it is actually the MRU that these switches permit configuring. In Linux there only exists the IFLA_MTU netlink attribute and the associated dev_set_mtu function. The comments like to play blind and say that it's changing the "maximum transfer unit", which is to say that there isn't any directionality in the meaning of the MTU word. So that is the interpretation that this patch is giving to things: MTU == MRU. When 2 interfaces having different MTUs are bridged, the bridge driver MTU auto-adjustment logic kicks in: what br_mtu_auto_adjust() does is it adjusts the MTU of the bridge net device itself (and not that of the slave net devices) to the minimum value of all slave interfaces, in order for forwarded packets to not exceed the MTU regardless of the interface they are received and send on. The idea behind this behavior, and why the slave MTUs are not adjusted, is that normal termination from Linux over the L2 forwarding domain should happen over the bridge net device, which _is_ properly limited by the minimum MTU. And termination over individual slave devices is possible even if those are bridged. But that is not "forwarding", so there's no reason to do normalization there, since only a single interface sees that packet. The problem with those switches that can only control the MRU is with the offloaded data path, where a packet received on an interface with MRU 9000 would still be forwarded to an interface with MRU 1500. And the br_mtu_auto_adjust() function does not really help, since the MTU configured on the bridge net device is ignored. In order to enforce the de-facto MTU == MRU rule for these switches, we need to do MTU normalization, which means: in order for no packet larger than the MTU configured on this port to be sent, then we need to limit the MRU on all ports that this packet could possibly come from. AKA since we are configuring the MRU via MTU, it means that all ports within a bridge forwarding domain should have the same MTU. And that is exactly what this patch is trying to do. >From an implementation perspective, we try to follow the intent of the user, otherwise there is a risk that we might livelock them (they try to change the MTU on an already-bridged interface, but we just keep changing it back in an attempt to keep the MTU normalized). So the MTU that the bridge is normalized to is either: - The most recently changed one: ip link set dev swp0 master br0 ip link set dev swp1 master br0 ip link set dev swp0 mtu 1400 This sequence will make swp1 inherit MTU 1400 from swp0. - The one of the most recently added interface to the bridge: ip link set dev swp0 master br0 ip link set dev swp1 mtu 1400 ip link set dev swp1 master br0 The above sequence will make swp0 inherit MTU 1400 as well. Suggested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27 19:55:43 +00:00
continue;
if (!other_dp->ds->mtu_enforcement_ingress)
continue;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
user = other_dp->user;
net: dsa: implement auto-normalization of MTU for bridge hardware datapath Many switches don't have an explicit knob for configuring the MTU (maximum transmission unit per interface). Instead, they do the length-based packet admission checks on the ingress interface, for reasons that are easy to understand (why would you accept a packet in the queuing subsystem if you know you're going to drop it anyway). So it is actually the MRU that these switches permit configuring. In Linux there only exists the IFLA_MTU netlink attribute and the associated dev_set_mtu function. The comments like to play blind and say that it's changing the "maximum transfer unit", which is to say that there isn't any directionality in the meaning of the MTU word. So that is the interpretation that this patch is giving to things: MTU == MRU. When 2 interfaces having different MTUs are bridged, the bridge driver MTU auto-adjustment logic kicks in: what br_mtu_auto_adjust() does is it adjusts the MTU of the bridge net device itself (and not that of the slave net devices) to the minimum value of all slave interfaces, in order for forwarded packets to not exceed the MTU regardless of the interface they are received and send on. The idea behind this behavior, and why the slave MTUs are not adjusted, is that normal termination from Linux over the L2 forwarding domain should happen over the bridge net device, which _is_ properly limited by the minimum MTU. And termination over individual slave devices is possible even if those are bridged. But that is not "forwarding", so there's no reason to do normalization there, since only a single interface sees that packet. The problem with those switches that can only control the MRU is with the offloaded data path, where a packet received on an interface with MRU 9000 would still be forwarded to an interface with MRU 1500. And the br_mtu_auto_adjust() function does not really help, since the MTU configured on the bridge net device is ignored. In order to enforce the de-facto MTU == MRU rule for these switches, we need to do MTU normalization, which means: in order for no packet larger than the MTU configured on this port to be sent, then we need to limit the MRU on all ports that this packet could possibly come from. AKA since we are configuring the MRU via MTU, it means that all ports within a bridge forwarding domain should have the same MTU. And that is exactly what this patch is trying to do. >From an implementation perspective, we try to follow the intent of the user, otherwise there is a risk that we might livelock them (they try to change the MTU on an already-bridged interface, but we just keep changing it back in an attempt to keep the MTU normalized). So the MTU that the bridge is normalized to is either: - The most recently changed one: ip link set dev swp0 master br0 ip link set dev swp1 master br0 ip link set dev swp0 mtu 1400 This sequence will make swp1 inherit MTU 1400 from swp0. - The one of the most recently added interface to the bridge: ip link set dev swp0 master br0 ip link set dev swp1 mtu 1400 ip link set dev swp1 master br0 The above sequence will make swp0 inherit MTU 1400 as well. Suggested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27 19:55:43 +00:00
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
if (min_mtu > user->mtu)
min_mtu = user->mtu;
net: dsa: implement auto-normalization of MTU for bridge hardware datapath Many switches don't have an explicit knob for configuring the MTU (maximum transmission unit per interface). Instead, they do the length-based packet admission checks on the ingress interface, for reasons that are easy to understand (why would you accept a packet in the queuing subsystem if you know you're going to drop it anyway). So it is actually the MRU that these switches permit configuring. In Linux there only exists the IFLA_MTU netlink attribute and the associated dev_set_mtu function. The comments like to play blind and say that it's changing the "maximum transfer unit", which is to say that there isn't any directionality in the meaning of the MTU word. So that is the interpretation that this patch is giving to things: MTU == MRU. When 2 interfaces having different MTUs are bridged, the bridge driver MTU auto-adjustment logic kicks in: what br_mtu_auto_adjust() does is it adjusts the MTU of the bridge net device itself (and not that of the slave net devices) to the minimum value of all slave interfaces, in order for forwarded packets to not exceed the MTU regardless of the interface they are received and send on. The idea behind this behavior, and why the slave MTUs are not adjusted, is that normal termination from Linux over the L2 forwarding domain should happen over the bridge net device, which _is_ properly limited by the minimum MTU. And termination over individual slave devices is possible even if those are bridged. But that is not "forwarding", so there's no reason to do normalization there, since only a single interface sees that packet. The problem with those switches that can only control the MRU is with the offloaded data path, where a packet received on an interface with MRU 9000 would still be forwarded to an interface with MRU 1500. And the br_mtu_auto_adjust() function does not really help, since the MTU configured on the bridge net device is ignored. In order to enforce the de-facto MTU == MRU rule for these switches, we need to do MTU normalization, which means: in order for no packet larger than the MTU configured on this port to be sent, then we need to limit the MRU on all ports that this packet could possibly come from. AKA since we are configuring the MRU via MTU, it means that all ports within a bridge forwarding domain should have the same MTU. And that is exactly what this patch is trying to do. >From an implementation perspective, we try to follow the intent of the user, otherwise there is a risk that we might livelock them (they try to change the MTU on an already-bridged interface, but we just keep changing it back in an attempt to keep the MTU normalized). So the MTU that the bridge is normalized to is either: - The most recently changed one: ip link set dev swp0 master br0 ip link set dev swp1 master br0 ip link set dev swp0 mtu 1400 This sequence will make swp1 inherit MTU 1400 from swp0. - The one of the most recently added interface to the bridge: ip link set dev swp0 master br0 ip link set dev swp1 mtu 1400 ip link set dev swp1 master br0 The above sequence will make swp0 inherit MTU 1400 as well. Suggested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27 19:55:43 +00:00
hw_port = kzalloc(sizeof(*hw_port), GFP_KERNEL);
if (!hw_port)
goto out;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
hw_port->dev = user;
hw_port->old_mtu = user->mtu;
net: dsa: implement auto-normalization of MTU for bridge hardware datapath Many switches don't have an explicit knob for configuring the MTU (maximum transmission unit per interface). Instead, they do the length-based packet admission checks on the ingress interface, for reasons that are easy to understand (why would you accept a packet in the queuing subsystem if you know you're going to drop it anyway). So it is actually the MRU that these switches permit configuring. In Linux there only exists the IFLA_MTU netlink attribute and the associated dev_set_mtu function. The comments like to play blind and say that it's changing the "maximum transfer unit", which is to say that there isn't any directionality in the meaning of the MTU word. So that is the interpretation that this patch is giving to things: MTU == MRU. When 2 interfaces having different MTUs are bridged, the bridge driver MTU auto-adjustment logic kicks in: what br_mtu_auto_adjust() does is it adjusts the MTU of the bridge net device itself (and not that of the slave net devices) to the minimum value of all slave interfaces, in order for forwarded packets to not exceed the MTU regardless of the interface they are received and send on. The idea behind this behavior, and why the slave MTUs are not adjusted, is that normal termination from Linux over the L2 forwarding domain should happen over the bridge net device, which _is_ properly limited by the minimum MTU. And termination over individual slave devices is possible even if those are bridged. But that is not "forwarding", so there's no reason to do normalization there, since only a single interface sees that packet. The problem with those switches that can only control the MRU is with the offloaded data path, where a packet received on an interface with MRU 9000 would still be forwarded to an interface with MRU 1500. And the br_mtu_auto_adjust() function does not really help, since the MTU configured on the bridge net device is ignored. In order to enforce the de-facto MTU == MRU rule for these switches, we need to do MTU normalization, which means: in order for no packet larger than the MTU configured on this port to be sent, then we need to limit the MRU on all ports that this packet could possibly come from. AKA since we are configuring the MRU via MTU, it means that all ports within a bridge forwarding domain should have the same MTU. And that is exactly what this patch is trying to do. >From an implementation perspective, we try to follow the intent of the user, otherwise there is a risk that we might livelock them (they try to change the MTU on an already-bridged interface, but we just keep changing it back in an attempt to keep the MTU normalized). So the MTU that the bridge is normalized to is either: - The most recently changed one: ip link set dev swp0 master br0 ip link set dev swp1 master br0 ip link set dev swp0 mtu 1400 This sequence will make swp1 inherit MTU 1400 from swp0. - The one of the most recently added interface to the bridge: ip link set dev swp0 master br0 ip link set dev swp1 mtu 1400 ip link set dev swp1 master br0 The above sequence will make swp0 inherit MTU 1400 as well. Suggested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27 19:55:43 +00:00
list_add(&hw_port->list, &hw_port_list);
}
}
/* Attempt to configure the entire hardware bridge to the newly added
* interface's MTU first, regardless of whether the intention of the
* user was to raise or lower it.
*/
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
err = dsa_hw_port_list_set_mtu(&hw_port_list, dp->user->mtu);
net: dsa: implement auto-normalization of MTU for bridge hardware datapath Many switches don't have an explicit knob for configuring the MTU (maximum transmission unit per interface). Instead, they do the length-based packet admission checks on the ingress interface, for reasons that are easy to understand (why would you accept a packet in the queuing subsystem if you know you're going to drop it anyway). So it is actually the MRU that these switches permit configuring. In Linux there only exists the IFLA_MTU netlink attribute and the associated dev_set_mtu function. The comments like to play blind and say that it's changing the "maximum transfer unit", which is to say that there isn't any directionality in the meaning of the MTU word. So that is the interpretation that this patch is giving to things: MTU == MRU. When 2 interfaces having different MTUs are bridged, the bridge driver MTU auto-adjustment logic kicks in: what br_mtu_auto_adjust() does is it adjusts the MTU of the bridge net device itself (and not that of the slave net devices) to the minimum value of all slave interfaces, in order for forwarded packets to not exceed the MTU regardless of the interface they are received and send on. The idea behind this behavior, and why the slave MTUs are not adjusted, is that normal termination from Linux over the L2 forwarding domain should happen over the bridge net device, which _is_ properly limited by the minimum MTU. And termination over individual slave devices is possible even if those are bridged. But that is not "forwarding", so there's no reason to do normalization there, since only a single interface sees that packet. The problem with those switches that can only control the MRU is with the offloaded data path, where a packet received on an interface with MRU 9000 would still be forwarded to an interface with MRU 1500. And the br_mtu_auto_adjust() function does not really help, since the MTU configured on the bridge net device is ignored. In order to enforce the de-facto MTU == MRU rule for these switches, we need to do MTU normalization, which means: in order for no packet larger than the MTU configured on this port to be sent, then we need to limit the MRU on all ports that this packet could possibly come from. AKA since we are configuring the MRU via MTU, it means that all ports within a bridge forwarding domain should have the same MTU. And that is exactly what this patch is trying to do. >From an implementation perspective, we try to follow the intent of the user, otherwise there is a risk that we might livelock them (they try to change the MTU on an already-bridged interface, but we just keep changing it back in an attempt to keep the MTU normalized). So the MTU that the bridge is normalized to is either: - The most recently changed one: ip link set dev swp0 master br0 ip link set dev swp1 master br0 ip link set dev swp0 mtu 1400 This sequence will make swp1 inherit MTU 1400 from swp0. - The one of the most recently added interface to the bridge: ip link set dev swp0 master br0 ip link set dev swp1 mtu 1400 ip link set dev swp1 master br0 The above sequence will make swp0 inherit MTU 1400 as well. Suggested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27 19:55:43 +00:00
if (!err)
goto out;
/* Clearly that didn't work out so well, so just set the minimum MTU on
* all hardware bridge ports now. If this fails too, then all ports will
* still have their old MTU rolled back anyway.
*/
dsa_hw_port_list_set_mtu(&hw_port_list, min_mtu);
out:
dsa_hw_port_list_free(&hw_port_list);
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
int dsa_user_change_mtu(struct net_device *dev, int new_mtu)
net: dsa: configure the MTU for switch ports It is useful be able to configure port policers on a switch to accept frames of various sizes: - Increase the MTU for better throughput from the default of 1500 if it is known that there is no 10/100 Mbps device in the network. - Decrease the MTU to limit the latency of high-priority frames under congestion, or work around various network segments that add extra headers to packets which can't be fragmented. For DSA slave ports, this is mostly a pass-through callback, called through the regular ndo ops and at probe time (to ensure consistency across all supported switches). The CPU port is called with an MTU equal to the largest configured MTU of the slave ports. The assumption is that the user might want to sustain a bidirectional conversation with a partner over any switch port. The DSA master is configured the same as the CPU port, plus the tagger overhead. Since the MTU is by definition L2 payload (sans Ethernet header), it is up to each individual driver to figure out if it needs to do anything special for its frame tags on the CPU port (it shouldn't except in special cases). So the MTU does not contain the tagger overhead on the CPU port. However the MTU of the DSA master, minus the tagger overhead, is used as a proxy for the MTU of the CPU port, which does not have a net device. This is to avoid uselessly calling the .change_mtu function on the CPU port when nothing should change. So it is safe to assume that the DSA master and the CPU port MTUs are apart by exactly the tagger's overhead in bytes. Some changes were made around dsa_master_set_mtu(), function which was now removed, for 2 reasons: - dev_set_mtu() already calls dev_validate_mtu(), so it's redundant to do the same thing in DSA - __dev_set_mtu() returns 0 if ops->ndo_change_mtu is an absent method That is to say, there's no need for this function in DSA, we can safely call dev_set_mtu() directly, take the rtnl lock when necessary, and just propagate whatever errors get reported (since the user probably wants to be informed). Some inspiration (mainly in the MTU DSA notifier) was taken from a vaguely similar patch from Murali and Florian, who are credited as co-developers down below. Co-developed-by: Murali Krishna Policharla <murali.policharla@broadcom.com> Signed-off-by: Murali Krishna Policharla <murali.policharla@broadcom.com> Co-developed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27 19:55:42 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct net_device *conduit = dsa_user_to_conduit(dev);
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: avoid one dsa_to_port() in dsa_slave_change_mtu We could retrieve the cpu_dp pointer directly from the "dp" we already have, no need to resort to dsa_to_port(ds, port). This change also removes the need for an "int port", so that is also deleted. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15 15:46:24 +00:00
struct dsa_port *cpu_dp = dp->cpu_dp;
net: dsa: drop dsa_slave_priv from dsa_slave_change_mtu We can get a hold of the "ds" pointer directly from "dp", no need for the dsa_slave_priv. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15 15:46:25 +00:00
struct dsa_switch *ds = dp->ds;
net: dsa: use dsa_tree_for_each_user_port in dsa_slave_change_mtu Use the more conventional iterator over user ports instead of explicitly ignoring them, and use the more conventional name "other_dp" instead of "dp_iter", for readability. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15 15:46:23 +00:00
struct dsa_port *other_dp;
net: dsa: configure the MTU for switch ports It is useful be able to configure port policers on a switch to accept frames of various sizes: - Increase the MTU for better throughput from the default of 1500 if it is known that there is no 10/100 Mbps device in the network. - Decrease the MTU to limit the latency of high-priority frames under congestion, or work around various network segments that add extra headers to packets which can't be fragmented. For DSA slave ports, this is mostly a pass-through callback, called through the regular ndo ops and at probe time (to ensure consistency across all supported switches). The CPU port is called with an MTU equal to the largest configured MTU of the slave ports. The assumption is that the user might want to sustain a bidirectional conversation with a partner over any switch port. The DSA master is configured the same as the CPU port, plus the tagger overhead. Since the MTU is by definition L2 payload (sans Ethernet header), it is up to each individual driver to figure out if it needs to do anything special for its frame tags on the CPU port (it shouldn't except in special cases). So the MTU does not contain the tagger overhead on the CPU port. However the MTU of the DSA master, minus the tagger overhead, is used as a proxy for the MTU of the CPU port, which does not have a net device. This is to avoid uselessly calling the .change_mtu function on the CPU port when nothing should change. So it is safe to assume that the DSA master and the CPU port MTUs are apart by exactly the tagger's overhead in bytes. Some changes were made around dsa_master_set_mtu(), function which was now removed, for 2 reasons: - dev_set_mtu() already calls dev_validate_mtu(), so it's redundant to do the same thing in DSA - __dev_set_mtu() returns 0 if ops->ndo_change_mtu is an absent method That is to say, there's no need for this function in DSA, we can safely call dev_set_mtu() directly, take the rtnl lock when necessary, and just propagate whatever errors get reported (since the user probably wants to be informed). Some inspiration (mainly in the MTU DSA notifier) was taken from a vaguely similar patch from Murali and Florian, who are credited as co-developers down below. Co-developed-by: Murali Krishna Policharla <murali.policharla@broadcom.com> Signed-off-by: Murali Krishna Policharla <murali.policharla@broadcom.com> Co-developed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27 19:55:42 +00:00
int largest_mtu = 0;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
int new_conduit_mtu;
int old_conduit_mtu;
net: dsa: configure the MTU for switch ports It is useful be able to configure port policers on a switch to accept frames of various sizes: - Increase the MTU for better throughput from the default of 1500 if it is known that there is no 10/100 Mbps device in the network. - Decrease the MTU to limit the latency of high-priority frames under congestion, or work around various network segments that add extra headers to packets which can't be fragmented. For DSA slave ports, this is mostly a pass-through callback, called through the regular ndo ops and at probe time (to ensure consistency across all supported switches). The CPU port is called with an MTU equal to the largest configured MTU of the slave ports. The assumption is that the user might want to sustain a bidirectional conversation with a partner over any switch port. The DSA master is configured the same as the CPU port, plus the tagger overhead. Since the MTU is by definition L2 payload (sans Ethernet header), it is up to each individual driver to figure out if it needs to do anything special for its frame tags on the CPU port (it shouldn't except in special cases). So the MTU does not contain the tagger overhead on the CPU port. However the MTU of the DSA master, minus the tagger overhead, is used as a proxy for the MTU of the CPU port, which does not have a net device. This is to avoid uselessly calling the .change_mtu function on the CPU port when nothing should change. So it is safe to assume that the DSA master and the CPU port MTUs are apart by exactly the tagger's overhead in bytes. Some changes were made around dsa_master_set_mtu(), function which was now removed, for 2 reasons: - dev_set_mtu() already calls dev_validate_mtu(), so it's redundant to do the same thing in DSA - __dev_set_mtu() returns 0 if ops->ndo_change_mtu is an absent method That is to say, there's no need for this function in DSA, we can safely call dev_set_mtu() directly, take the rtnl lock when necessary, and just propagate whatever errors get reported (since the user probably wants to be informed). Some inspiration (mainly in the MTU DSA notifier) was taken from a vaguely similar patch from Murali and Florian, who are credited as co-developers down below. Co-developed-by: Murali Krishna Policharla <murali.policharla@broadcom.com> Signed-off-by: Murali Krishna Policharla <murali.policharla@broadcom.com> Co-developed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27 19:55:42 +00:00
int mtu_limit;
net: dsa: don't error out when drivers return ETH_DATA_LEN in .port_max_mtu() Currently, when dsa_slave_change_mtu() is called on a user port where dev->max_mtu is 1500 (as returned by ds->ops->port_max_mtu()), the code will stumble upon this check: if (new_master_mtu > mtu_limit) return -ERANGE; because new_master_mtu is adjusted for the tagger overhead but mtu_limit is not. But it would be good if the logic went through, for example if the DSA master really depends on an MTU adjustment to accept DSA-tagged frames. To make the code pass through the check, we need to adjust mtu_limit for the overhead as well, if the minimum restriction was caused by the DSA user port's MTU (dev->max_mtu). A DSA user port MTU and a DSA master MTU are always offset by the protocol overhead. Currently no drivers return 1500 .port_max_mtu(), but this is only temporary and a bug in itself - mv88e6xxx should have done that, but since commit b9c587fed61c ("dsa: mv88e6xxx: Include tagger overhead when setting MTU for DSA and CPU ports") it no longer does. This is a preparation for fixing that. Fixes: bfcb813203e6 ("net: dsa: configure the MTU for switch ports") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-14 18:24:04 +00:00
int overhead;
net: dsa: configure the MTU for switch ports It is useful be able to configure port policers on a switch to accept frames of various sizes: - Increase the MTU for better throughput from the default of 1500 if it is known that there is no 10/100 Mbps device in the network. - Decrease the MTU to limit the latency of high-priority frames under congestion, or work around various network segments that add extra headers to packets which can't be fragmented. For DSA slave ports, this is mostly a pass-through callback, called through the regular ndo ops and at probe time (to ensure consistency across all supported switches). The CPU port is called with an MTU equal to the largest configured MTU of the slave ports. The assumption is that the user might want to sustain a bidirectional conversation with a partner over any switch port. The DSA master is configured the same as the CPU port, plus the tagger overhead. Since the MTU is by definition L2 payload (sans Ethernet header), it is up to each individual driver to figure out if it needs to do anything special for its frame tags on the CPU port (it shouldn't except in special cases). So the MTU does not contain the tagger overhead on the CPU port. However the MTU of the DSA master, minus the tagger overhead, is used as a proxy for the MTU of the CPU port, which does not have a net device. This is to avoid uselessly calling the .change_mtu function on the CPU port when nothing should change. So it is safe to assume that the DSA master and the CPU port MTUs are apart by exactly the tagger's overhead in bytes. Some changes were made around dsa_master_set_mtu(), function which was now removed, for 2 reasons: - dev_set_mtu() already calls dev_validate_mtu(), so it's redundant to do the same thing in DSA - __dev_set_mtu() returns 0 if ops->ndo_change_mtu is an absent method That is to say, there's no need for this function in DSA, we can safely call dev_set_mtu() directly, take the rtnl lock when necessary, and just propagate whatever errors get reported (since the user probably wants to be informed). Some inspiration (mainly in the MTU DSA notifier) was taken from a vaguely similar patch from Murali and Florian, who are credited as co-developers down below. Co-developed-by: Murali Krishna Policharla <murali.policharla@broadcom.com> Signed-off-by: Murali Krishna Policharla <murali.policharla@broadcom.com> Co-developed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27 19:55:42 +00:00
int cpu_mtu;
net: dsa: calculate the largest_mtu across all ports in the tree If we have a cross-chip topology like this: sw0p0 sw0p1 sw0p2 sw0p3 sw0p4 [ cpu ] [ user ] [ user ] [ dsa ] [ user ] | +---------+ | sw1p0 sw1p1 sw1p2 sw1p3 sw1p4 [ user ] [ user ] [ user ] [ dsa ] [ dsa ] and we issue the following commands: 1. ip link set sw0p1 mtu 1700 2. ip link set sw1p1 mtu 1600 we notice the following happening: Command 1. emits a non-targeted MTU notifier for the CPU port (sw0p0) with the largest_mtu calculated across switch 0, of 1700. This matches sw0p0, sw0p3 and sw1p4 (all CPU ports and DSA links). Then, it emits a targeted MTU notifier for the user port (sw0p1), again with MTU 1700 (this doesn't matter). Command 2. emits a non-targeted MTU notifier for the CPU port (sw0p0) with the largest_mtu calculated across switch 1, of 1600. This matches the same group of ports as above, and decreases the MTU for the CPU port and the DSA links from 1700 to 1600. As a result, the sw0p1 user port can no longer communicate with its CPU port at MTU 1700. To address this, we should calculate the largest_mtu across all switches that may share a CPU port, and only emit MTU notifiers with that value. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21 16:42:17 +00:00
int err;
net: dsa: configure the MTU for switch ports It is useful be able to configure port policers on a switch to accept frames of various sizes: - Increase the MTU for better throughput from the default of 1500 if it is known that there is no 10/100 Mbps device in the network. - Decrease the MTU to limit the latency of high-priority frames under congestion, or work around various network segments that add extra headers to packets which can't be fragmented. For DSA slave ports, this is mostly a pass-through callback, called through the regular ndo ops and at probe time (to ensure consistency across all supported switches). The CPU port is called with an MTU equal to the largest configured MTU of the slave ports. The assumption is that the user might want to sustain a bidirectional conversation with a partner over any switch port. The DSA master is configured the same as the CPU port, plus the tagger overhead. Since the MTU is by definition L2 payload (sans Ethernet header), it is up to each individual driver to figure out if it needs to do anything special for its frame tags on the CPU port (it shouldn't except in special cases). So the MTU does not contain the tagger overhead on the CPU port. However the MTU of the DSA master, minus the tagger overhead, is used as a proxy for the MTU of the CPU port, which does not have a net device. This is to avoid uselessly calling the .change_mtu function on the CPU port when nothing should change. So it is safe to assume that the DSA master and the CPU port MTUs are apart by exactly the tagger's overhead in bytes. Some changes were made around dsa_master_set_mtu(), function which was now removed, for 2 reasons: - dev_set_mtu() already calls dev_validate_mtu(), so it's redundant to do the same thing in DSA - __dev_set_mtu() returns 0 if ops->ndo_change_mtu is an absent method That is to say, there's no need for this function in DSA, we can safely call dev_set_mtu() directly, take the rtnl lock when necessary, and just propagate whatever errors get reported (since the user probably wants to be informed). Some inspiration (mainly in the MTU DSA notifier) was taken from a vaguely similar patch from Murali and Florian, who are credited as co-developers down below. Co-developed-by: Murali Krishna Policharla <murali.policharla@broadcom.com> Signed-off-by: Murali Krishna Policharla <murali.policharla@broadcom.com> Co-developed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27 19:55:42 +00:00
if (!ds->ops->port_change_mtu)
return -EOPNOTSUPP;
net: dsa: use dsa_tree_for_each_user_port in dsa_slave_change_mtu Use the more conventional iterator over user ports instead of explicitly ignoring them, and use the more conventional name "other_dp" instead of "dp_iter", for readability. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15 15:46:23 +00:00
dsa_tree_for_each_user_port(other_dp, ds->dst) {
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
int user_mtu;
net: dsa: configure the MTU for switch ports It is useful be able to configure port policers on a switch to accept frames of various sizes: - Increase the MTU for better throughput from the default of 1500 if it is known that there is no 10/100 Mbps device in the network. - Decrease the MTU to limit the latency of high-priority frames under congestion, or work around various network segments that add extra headers to packets which can't be fragmented. For DSA slave ports, this is mostly a pass-through callback, called through the regular ndo ops and at probe time (to ensure consistency across all supported switches). The CPU port is called with an MTU equal to the largest configured MTU of the slave ports. The assumption is that the user might want to sustain a bidirectional conversation with a partner over any switch port. The DSA master is configured the same as the CPU port, plus the tagger overhead. Since the MTU is by definition L2 payload (sans Ethernet header), it is up to each individual driver to figure out if it needs to do anything special for its frame tags on the CPU port (it shouldn't except in special cases). So the MTU does not contain the tagger overhead on the CPU port. However the MTU of the DSA master, minus the tagger overhead, is used as a proxy for the MTU of the CPU port, which does not have a net device. This is to avoid uselessly calling the .change_mtu function on the CPU port when nothing should change. So it is safe to assume that the DSA master and the CPU port MTUs are apart by exactly the tagger's overhead in bytes. Some changes were made around dsa_master_set_mtu(), function which was now removed, for 2 reasons: - dev_set_mtu() already calls dev_validate_mtu(), so it's redundant to do the same thing in DSA - __dev_set_mtu() returns 0 if ops->ndo_change_mtu is an absent method That is to say, there's no need for this function in DSA, we can safely call dev_set_mtu() directly, take the rtnl lock when necessary, and just propagate whatever errors get reported (since the user probably wants to be informed). Some inspiration (mainly in the MTU DSA notifier) was taken from a vaguely similar patch from Murali and Florian, who are credited as co-developers down below. Co-developed-by: Murali Krishna Policharla <murali.policharla@broadcom.com> Signed-off-by: Murali Krishna Policharla <murali.policharla@broadcom.com> Co-developed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27 19:55:42 +00:00
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
/* During probe, this function will be called for each user
net: dsa: configure the MTU for switch ports It is useful be able to configure port policers on a switch to accept frames of various sizes: - Increase the MTU for better throughput from the default of 1500 if it is known that there is no 10/100 Mbps device in the network. - Decrease the MTU to limit the latency of high-priority frames under congestion, or work around various network segments that add extra headers to packets which can't be fragmented. For DSA slave ports, this is mostly a pass-through callback, called through the regular ndo ops and at probe time (to ensure consistency across all supported switches). The CPU port is called with an MTU equal to the largest configured MTU of the slave ports. The assumption is that the user might want to sustain a bidirectional conversation with a partner over any switch port. The DSA master is configured the same as the CPU port, plus the tagger overhead. Since the MTU is by definition L2 payload (sans Ethernet header), it is up to each individual driver to figure out if it needs to do anything special for its frame tags on the CPU port (it shouldn't except in special cases). So the MTU does not contain the tagger overhead on the CPU port. However the MTU of the DSA master, minus the tagger overhead, is used as a proxy for the MTU of the CPU port, which does not have a net device. This is to avoid uselessly calling the .change_mtu function on the CPU port when nothing should change. So it is safe to assume that the DSA master and the CPU port MTUs are apart by exactly the tagger's overhead in bytes. Some changes were made around dsa_master_set_mtu(), function which was now removed, for 2 reasons: - dev_set_mtu() already calls dev_validate_mtu(), so it's redundant to do the same thing in DSA - __dev_set_mtu() returns 0 if ops->ndo_change_mtu is an absent method That is to say, there's no need for this function in DSA, we can safely call dev_set_mtu() directly, take the rtnl lock when necessary, and just propagate whatever errors get reported (since the user probably wants to be informed). Some inspiration (mainly in the MTU DSA notifier) was taken from a vaguely similar patch from Murali and Florian, who are credited as co-developers down below. Co-developed-by: Murali Krishna Policharla <murali.policharla@broadcom.com> Signed-off-by: Murali Krishna Policharla <murali.policharla@broadcom.com> Co-developed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27 19:55:42 +00:00
* device, while not all of them have been allocated. That's
* ok, it doesn't change what the maximum is, so ignore it.
*/
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
if (!other_dp->user)
net: dsa: configure the MTU for switch ports It is useful be able to configure port policers on a switch to accept frames of various sizes: - Increase the MTU for better throughput from the default of 1500 if it is known that there is no 10/100 Mbps device in the network. - Decrease the MTU to limit the latency of high-priority frames under congestion, or work around various network segments that add extra headers to packets which can't be fragmented. For DSA slave ports, this is mostly a pass-through callback, called through the regular ndo ops and at probe time (to ensure consistency across all supported switches). The CPU port is called with an MTU equal to the largest configured MTU of the slave ports. The assumption is that the user might want to sustain a bidirectional conversation with a partner over any switch port. The DSA master is configured the same as the CPU port, plus the tagger overhead. Since the MTU is by definition L2 payload (sans Ethernet header), it is up to each individual driver to figure out if it needs to do anything special for its frame tags on the CPU port (it shouldn't except in special cases). So the MTU does not contain the tagger overhead on the CPU port. However the MTU of the DSA master, minus the tagger overhead, is used as a proxy for the MTU of the CPU port, which does not have a net device. This is to avoid uselessly calling the .change_mtu function on the CPU port when nothing should change. So it is safe to assume that the DSA master and the CPU port MTUs are apart by exactly the tagger's overhead in bytes. Some changes were made around dsa_master_set_mtu(), function which was now removed, for 2 reasons: - dev_set_mtu() already calls dev_validate_mtu(), so it's redundant to do the same thing in DSA - __dev_set_mtu() returns 0 if ops->ndo_change_mtu is an absent method That is to say, there's no need for this function in DSA, we can safely call dev_set_mtu() directly, take the rtnl lock when necessary, and just propagate whatever errors get reported (since the user probably wants to be informed). Some inspiration (mainly in the MTU DSA notifier) was taken from a vaguely similar patch from Murali and Florian, who are credited as co-developers down below. Co-developed-by: Murali Krishna Policharla <murali.policharla@broadcom.com> Signed-off-by: Murali Krishna Policharla <murali.policharla@broadcom.com> Co-developed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27 19:55:42 +00:00
continue;
/* Pretend that we already applied the setting, which we
* actually haven't (still haven't done all integrity checks)
*/
net: dsa: use dsa_tree_for_each_user_port in dsa_slave_change_mtu Use the more conventional iterator over user ports instead of explicitly ignoring them, and use the more conventional name "other_dp" instead of "dp_iter", for readability. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15 15:46:23 +00:00
if (dp == other_dp)
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
user_mtu = new_mtu;
net: dsa: configure the MTU for switch ports It is useful be able to configure port policers on a switch to accept frames of various sizes: - Increase the MTU for better throughput from the default of 1500 if it is known that there is no 10/100 Mbps device in the network. - Decrease the MTU to limit the latency of high-priority frames under congestion, or work around various network segments that add extra headers to packets which can't be fragmented. For DSA slave ports, this is mostly a pass-through callback, called through the regular ndo ops and at probe time (to ensure consistency across all supported switches). The CPU port is called with an MTU equal to the largest configured MTU of the slave ports. The assumption is that the user might want to sustain a bidirectional conversation with a partner over any switch port. The DSA master is configured the same as the CPU port, plus the tagger overhead. Since the MTU is by definition L2 payload (sans Ethernet header), it is up to each individual driver to figure out if it needs to do anything special for its frame tags on the CPU port (it shouldn't except in special cases). So the MTU does not contain the tagger overhead on the CPU port. However the MTU of the DSA master, minus the tagger overhead, is used as a proxy for the MTU of the CPU port, which does not have a net device. This is to avoid uselessly calling the .change_mtu function on the CPU port when nothing should change. So it is safe to assume that the DSA master and the CPU port MTUs are apart by exactly the tagger's overhead in bytes. Some changes were made around dsa_master_set_mtu(), function which was now removed, for 2 reasons: - dev_set_mtu() already calls dev_validate_mtu(), so it's redundant to do the same thing in DSA - __dev_set_mtu() returns 0 if ops->ndo_change_mtu is an absent method That is to say, there's no need for this function in DSA, we can safely call dev_set_mtu() directly, take the rtnl lock when necessary, and just propagate whatever errors get reported (since the user probably wants to be informed). Some inspiration (mainly in the MTU DSA notifier) was taken from a vaguely similar patch from Murali and Florian, who are credited as co-developers down below. Co-developed-by: Murali Krishna Policharla <murali.policharla@broadcom.com> Signed-off-by: Murali Krishna Policharla <murali.policharla@broadcom.com> Co-developed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27 19:55:42 +00:00
else
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
user_mtu = other_dp->user->mtu;
net: dsa: configure the MTU for switch ports It is useful be able to configure port policers on a switch to accept frames of various sizes: - Increase the MTU for better throughput from the default of 1500 if it is known that there is no 10/100 Mbps device in the network. - Decrease the MTU to limit the latency of high-priority frames under congestion, or work around various network segments that add extra headers to packets which can't be fragmented. For DSA slave ports, this is mostly a pass-through callback, called through the regular ndo ops and at probe time (to ensure consistency across all supported switches). The CPU port is called with an MTU equal to the largest configured MTU of the slave ports. The assumption is that the user might want to sustain a bidirectional conversation with a partner over any switch port. The DSA master is configured the same as the CPU port, plus the tagger overhead. Since the MTU is by definition L2 payload (sans Ethernet header), it is up to each individual driver to figure out if it needs to do anything special for its frame tags on the CPU port (it shouldn't except in special cases). So the MTU does not contain the tagger overhead on the CPU port. However the MTU of the DSA master, minus the tagger overhead, is used as a proxy for the MTU of the CPU port, which does not have a net device. This is to avoid uselessly calling the .change_mtu function on the CPU port when nothing should change. So it is safe to assume that the DSA master and the CPU port MTUs are apart by exactly the tagger's overhead in bytes. Some changes were made around dsa_master_set_mtu(), function which was now removed, for 2 reasons: - dev_set_mtu() already calls dev_validate_mtu(), so it's redundant to do the same thing in DSA - __dev_set_mtu() returns 0 if ops->ndo_change_mtu is an absent method That is to say, there's no need for this function in DSA, we can safely call dev_set_mtu() directly, take the rtnl lock when necessary, and just propagate whatever errors get reported (since the user probably wants to be informed). Some inspiration (mainly in the MTU DSA notifier) was taken from a vaguely similar patch from Murali and Florian, who are credited as co-developers down below. Co-developed-by: Murali Krishna Policharla <murali.policharla@broadcom.com> Signed-off-by: Murali Krishna Policharla <murali.policharla@broadcom.com> Co-developed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27 19:55:42 +00:00
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
if (largest_mtu < user_mtu)
largest_mtu = user_mtu;
net: dsa: configure the MTU for switch ports It is useful be able to configure port policers on a switch to accept frames of various sizes: - Increase the MTU for better throughput from the default of 1500 if it is known that there is no 10/100 Mbps device in the network. - Decrease the MTU to limit the latency of high-priority frames under congestion, or work around various network segments that add extra headers to packets which can't be fragmented. For DSA slave ports, this is mostly a pass-through callback, called through the regular ndo ops and at probe time (to ensure consistency across all supported switches). The CPU port is called with an MTU equal to the largest configured MTU of the slave ports. The assumption is that the user might want to sustain a bidirectional conversation with a partner over any switch port. The DSA master is configured the same as the CPU port, plus the tagger overhead. Since the MTU is by definition L2 payload (sans Ethernet header), it is up to each individual driver to figure out if it needs to do anything special for its frame tags on the CPU port (it shouldn't except in special cases). So the MTU does not contain the tagger overhead on the CPU port. However the MTU of the DSA master, minus the tagger overhead, is used as a proxy for the MTU of the CPU port, which does not have a net device. This is to avoid uselessly calling the .change_mtu function on the CPU port when nothing should change. So it is safe to assume that the DSA master and the CPU port MTUs are apart by exactly the tagger's overhead in bytes. Some changes were made around dsa_master_set_mtu(), function which was now removed, for 2 reasons: - dev_set_mtu() already calls dev_validate_mtu(), so it's redundant to do the same thing in DSA - __dev_set_mtu() returns 0 if ops->ndo_change_mtu is an absent method That is to say, there's no need for this function in DSA, we can safely call dev_set_mtu() directly, take the rtnl lock when necessary, and just propagate whatever errors get reported (since the user probably wants to be informed). Some inspiration (mainly in the MTU DSA notifier) was taken from a vaguely similar patch from Murali and Florian, who are credited as co-developers down below. Co-developed-by: Murali Krishna Policharla <murali.policharla@broadcom.com> Signed-off-by: Murali Krishna Policharla <murali.policharla@broadcom.com> Co-developed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27 19:55:42 +00:00
}
net: dsa: don't error out when drivers return ETH_DATA_LEN in .port_max_mtu() Currently, when dsa_slave_change_mtu() is called on a user port where dev->max_mtu is 1500 (as returned by ds->ops->port_max_mtu()), the code will stumble upon this check: if (new_master_mtu > mtu_limit) return -ERANGE; because new_master_mtu is adjusted for the tagger overhead but mtu_limit is not. But it would be good if the logic went through, for example if the DSA master really depends on an MTU adjustment to accept DSA-tagged frames. To make the code pass through the check, we need to adjust mtu_limit for the overhead as well, if the minimum restriction was caused by the DSA user port's MTU (dev->max_mtu). A DSA user port MTU and a DSA master MTU are always offset by the protocol overhead. Currently no drivers return 1500 .port_max_mtu(), but this is only temporary and a bug in itself - mv88e6xxx should have done that, but since commit b9c587fed61c ("dsa: mv88e6xxx: Include tagger overhead when setting MTU for DSA and CPU ports") it no longer does. This is a preparation for fixing that. Fixes: bfcb813203e6 ("net: dsa: configure the MTU for switch ports") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-14 18:24:04 +00:00
overhead = dsa_tag_protocol_overhead(cpu_dp->tag_ops);
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
mtu_limit = min_t(int, conduit->max_mtu, dev->max_mtu + overhead);
old_conduit_mtu = conduit->mtu;
new_conduit_mtu = largest_mtu + overhead;
if (new_conduit_mtu > mtu_limit)
net: dsa: configure the MTU for switch ports It is useful be able to configure port policers on a switch to accept frames of various sizes: - Increase the MTU for better throughput from the default of 1500 if it is known that there is no 10/100 Mbps device in the network. - Decrease the MTU to limit the latency of high-priority frames under congestion, or work around various network segments that add extra headers to packets which can't be fragmented. For DSA slave ports, this is mostly a pass-through callback, called through the regular ndo ops and at probe time (to ensure consistency across all supported switches). The CPU port is called with an MTU equal to the largest configured MTU of the slave ports. The assumption is that the user might want to sustain a bidirectional conversation with a partner over any switch port. The DSA master is configured the same as the CPU port, plus the tagger overhead. Since the MTU is by definition L2 payload (sans Ethernet header), it is up to each individual driver to figure out if it needs to do anything special for its frame tags on the CPU port (it shouldn't except in special cases). So the MTU does not contain the tagger overhead on the CPU port. However the MTU of the DSA master, minus the tagger overhead, is used as a proxy for the MTU of the CPU port, which does not have a net device. This is to avoid uselessly calling the .change_mtu function on the CPU port when nothing should change. So it is safe to assume that the DSA master and the CPU port MTUs are apart by exactly the tagger's overhead in bytes. Some changes were made around dsa_master_set_mtu(), function which was now removed, for 2 reasons: - dev_set_mtu() already calls dev_validate_mtu(), so it's redundant to do the same thing in DSA - __dev_set_mtu() returns 0 if ops->ndo_change_mtu is an absent method That is to say, there's no need for this function in DSA, we can safely call dev_set_mtu() directly, take the rtnl lock when necessary, and just propagate whatever errors get reported (since the user probably wants to be informed). Some inspiration (mainly in the MTU DSA notifier) was taken from a vaguely similar patch from Murali and Florian, who are credited as co-developers down below. Co-developed-by: Murali Krishna Policharla <murali.policharla@broadcom.com> Signed-off-by: Murali Krishna Policharla <murali.policharla@broadcom.com> Co-developed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27 19:55:42 +00:00
return -ERANGE;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
/* If the conduit MTU isn't over limit, there's no need to check the CPU
net: dsa: configure the MTU for switch ports It is useful be able to configure port policers on a switch to accept frames of various sizes: - Increase the MTU for better throughput from the default of 1500 if it is known that there is no 10/100 Mbps device in the network. - Decrease the MTU to limit the latency of high-priority frames under congestion, or work around various network segments that add extra headers to packets which can't be fragmented. For DSA slave ports, this is mostly a pass-through callback, called through the regular ndo ops and at probe time (to ensure consistency across all supported switches). The CPU port is called with an MTU equal to the largest configured MTU of the slave ports. The assumption is that the user might want to sustain a bidirectional conversation with a partner over any switch port. The DSA master is configured the same as the CPU port, plus the tagger overhead. Since the MTU is by definition L2 payload (sans Ethernet header), it is up to each individual driver to figure out if it needs to do anything special for its frame tags on the CPU port (it shouldn't except in special cases). So the MTU does not contain the tagger overhead on the CPU port. However the MTU of the DSA master, minus the tagger overhead, is used as a proxy for the MTU of the CPU port, which does not have a net device. This is to avoid uselessly calling the .change_mtu function on the CPU port when nothing should change. So it is safe to assume that the DSA master and the CPU port MTUs are apart by exactly the tagger's overhead in bytes. Some changes were made around dsa_master_set_mtu(), function which was now removed, for 2 reasons: - dev_set_mtu() already calls dev_validate_mtu(), so it's redundant to do the same thing in DSA - __dev_set_mtu() returns 0 if ops->ndo_change_mtu is an absent method That is to say, there's no need for this function in DSA, we can safely call dev_set_mtu() directly, take the rtnl lock when necessary, and just propagate whatever errors get reported (since the user probably wants to be informed). Some inspiration (mainly in the MTU DSA notifier) was taken from a vaguely similar patch from Murali and Florian, who are credited as co-developers down below. Co-developed-by: Murali Krishna Policharla <murali.policharla@broadcom.com> Signed-off-by: Murali Krishna Policharla <murali.policharla@broadcom.com> Co-developed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27 19:55:42 +00:00
* MTU, since that surely isn't either.
*/
cpu_mtu = largest_mtu;
/* Start applying stuff */
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
if (new_conduit_mtu != old_conduit_mtu) {
err = dev_set_mtu(conduit, new_conduit_mtu);
net: dsa: configure the MTU for switch ports It is useful be able to configure port policers on a switch to accept frames of various sizes: - Increase the MTU for better throughput from the default of 1500 if it is known that there is no 10/100 Mbps device in the network. - Decrease the MTU to limit the latency of high-priority frames under congestion, or work around various network segments that add extra headers to packets which can't be fragmented. For DSA slave ports, this is mostly a pass-through callback, called through the regular ndo ops and at probe time (to ensure consistency across all supported switches). The CPU port is called with an MTU equal to the largest configured MTU of the slave ports. The assumption is that the user might want to sustain a bidirectional conversation with a partner over any switch port. The DSA master is configured the same as the CPU port, plus the tagger overhead. Since the MTU is by definition L2 payload (sans Ethernet header), it is up to each individual driver to figure out if it needs to do anything special for its frame tags on the CPU port (it shouldn't except in special cases). So the MTU does not contain the tagger overhead on the CPU port. However the MTU of the DSA master, minus the tagger overhead, is used as a proxy for the MTU of the CPU port, which does not have a net device. This is to avoid uselessly calling the .change_mtu function on the CPU port when nothing should change. So it is safe to assume that the DSA master and the CPU port MTUs are apart by exactly the tagger's overhead in bytes. Some changes were made around dsa_master_set_mtu(), function which was now removed, for 2 reasons: - dev_set_mtu() already calls dev_validate_mtu(), so it's redundant to do the same thing in DSA - __dev_set_mtu() returns 0 if ops->ndo_change_mtu is an absent method That is to say, there's no need for this function in DSA, we can safely call dev_set_mtu() directly, take the rtnl lock when necessary, and just propagate whatever errors get reported (since the user probably wants to be informed). Some inspiration (mainly in the MTU DSA notifier) was taken from a vaguely similar patch from Murali and Florian, who are credited as co-developers down below. Co-developed-by: Murali Krishna Policharla <murali.policharla@broadcom.com> Signed-off-by: Murali Krishna Policharla <murali.policharla@broadcom.com> Co-developed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27 19:55:42 +00:00
if (err < 0)
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
goto out_conduit_failed;
net: dsa: configure the MTU for switch ports It is useful be able to configure port policers on a switch to accept frames of various sizes: - Increase the MTU for better throughput from the default of 1500 if it is known that there is no 10/100 Mbps device in the network. - Decrease the MTU to limit the latency of high-priority frames under congestion, or work around various network segments that add extra headers to packets which can't be fragmented. For DSA slave ports, this is mostly a pass-through callback, called through the regular ndo ops and at probe time (to ensure consistency across all supported switches). The CPU port is called with an MTU equal to the largest configured MTU of the slave ports. The assumption is that the user might want to sustain a bidirectional conversation with a partner over any switch port. The DSA master is configured the same as the CPU port, plus the tagger overhead. Since the MTU is by definition L2 payload (sans Ethernet header), it is up to each individual driver to figure out if it needs to do anything special for its frame tags on the CPU port (it shouldn't except in special cases). So the MTU does not contain the tagger overhead on the CPU port. However the MTU of the DSA master, minus the tagger overhead, is used as a proxy for the MTU of the CPU port, which does not have a net device. This is to avoid uselessly calling the .change_mtu function on the CPU port when nothing should change. So it is safe to assume that the DSA master and the CPU port MTUs are apart by exactly the tagger's overhead in bytes. Some changes were made around dsa_master_set_mtu(), function which was now removed, for 2 reasons: - dev_set_mtu() already calls dev_validate_mtu(), so it's redundant to do the same thing in DSA - __dev_set_mtu() returns 0 if ops->ndo_change_mtu is an absent method That is to say, there's no need for this function in DSA, we can safely call dev_set_mtu() directly, take the rtnl lock when necessary, and just propagate whatever errors get reported (since the user probably wants to be informed). Some inspiration (mainly in the MTU DSA notifier) was taken from a vaguely similar patch from Murali and Florian, who are credited as co-developers down below. Co-developed-by: Murali Krishna Policharla <murali.policharla@broadcom.com> Signed-off-by: Murali Krishna Policharla <murali.policharla@broadcom.com> Co-developed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27 19:55:42 +00:00
/* We only need to propagate the MTU of the CPU port to
net: dsa: don't emit targeted cross-chip notifiers for MTU change A cross-chip notifier with "targeted_match=true" is one that matches only the local port of the switch that emitted it. In other words, passing through the cross-chip notifier layer serves no purpose. Eliminate this concept by calling directly ds->ops->port_change_mtu instead of emitting a targeted cross-chip notifier. This leaves the DSA_NOTIFIER_MTU event being emitted only for MTU updates on the CPU port, which need to be reflected also across all DSA links. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15 15:46:26 +00:00
* upstream switches, so emit a notifier which updates them.
net: dsa: configure the MTU for switch ports It is useful be able to configure port policers on a switch to accept frames of various sizes: - Increase the MTU for better throughput from the default of 1500 if it is known that there is no 10/100 Mbps device in the network. - Decrease the MTU to limit the latency of high-priority frames under congestion, or work around various network segments that add extra headers to packets which can't be fragmented. For DSA slave ports, this is mostly a pass-through callback, called through the regular ndo ops and at probe time (to ensure consistency across all supported switches). The CPU port is called with an MTU equal to the largest configured MTU of the slave ports. The assumption is that the user might want to sustain a bidirectional conversation with a partner over any switch port. The DSA master is configured the same as the CPU port, plus the tagger overhead. Since the MTU is by definition L2 payload (sans Ethernet header), it is up to each individual driver to figure out if it needs to do anything special for its frame tags on the CPU port (it shouldn't except in special cases). So the MTU does not contain the tagger overhead on the CPU port. However the MTU of the DSA master, minus the tagger overhead, is used as a proxy for the MTU of the CPU port, which does not have a net device. This is to avoid uselessly calling the .change_mtu function on the CPU port when nothing should change. So it is safe to assume that the DSA master and the CPU port MTUs are apart by exactly the tagger's overhead in bytes. Some changes were made around dsa_master_set_mtu(), function which was now removed, for 2 reasons: - dev_set_mtu() already calls dev_validate_mtu(), so it's redundant to do the same thing in DSA - __dev_set_mtu() returns 0 if ops->ndo_change_mtu is an absent method That is to say, there's no need for this function in DSA, we can safely call dev_set_mtu() directly, take the rtnl lock when necessary, and just propagate whatever errors get reported (since the user probably wants to be informed). Some inspiration (mainly in the MTU DSA notifier) was taken from a vaguely similar patch from Murali and Florian, who are credited as co-developers down below. Co-developed-by: Murali Krishna Policharla <murali.policharla@broadcom.com> Signed-off-by: Murali Krishna Policharla <murali.policharla@broadcom.com> Co-developed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27 19:55:42 +00:00
*/
net: dsa: don't emit targeted cross-chip notifiers for MTU change A cross-chip notifier with "targeted_match=true" is one that matches only the local port of the switch that emitted it. In other words, passing through the cross-chip notifier layer serves no purpose. Eliminate this concept by calling directly ds->ops->port_change_mtu instead of emitting a targeted cross-chip notifier. This leaves the DSA_NOTIFIER_MTU event being emitted only for MTU updates on the CPU port, which need to be reflected also across all DSA links. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15 15:46:26 +00:00
err = dsa_port_mtu_change(cpu_dp, cpu_mtu);
net: dsa: configure the MTU for switch ports It is useful be able to configure port policers on a switch to accept frames of various sizes: - Increase the MTU for better throughput from the default of 1500 if it is known that there is no 10/100 Mbps device in the network. - Decrease the MTU to limit the latency of high-priority frames under congestion, or work around various network segments that add extra headers to packets which can't be fragmented. For DSA slave ports, this is mostly a pass-through callback, called through the regular ndo ops and at probe time (to ensure consistency across all supported switches). The CPU port is called with an MTU equal to the largest configured MTU of the slave ports. The assumption is that the user might want to sustain a bidirectional conversation with a partner over any switch port. The DSA master is configured the same as the CPU port, plus the tagger overhead. Since the MTU is by definition L2 payload (sans Ethernet header), it is up to each individual driver to figure out if it needs to do anything special for its frame tags on the CPU port (it shouldn't except in special cases). So the MTU does not contain the tagger overhead on the CPU port. However the MTU of the DSA master, minus the tagger overhead, is used as a proxy for the MTU of the CPU port, which does not have a net device. This is to avoid uselessly calling the .change_mtu function on the CPU port when nothing should change. So it is safe to assume that the DSA master and the CPU port MTUs are apart by exactly the tagger's overhead in bytes. Some changes were made around dsa_master_set_mtu(), function which was now removed, for 2 reasons: - dev_set_mtu() already calls dev_validate_mtu(), so it's redundant to do the same thing in DSA - __dev_set_mtu() returns 0 if ops->ndo_change_mtu is an absent method That is to say, there's no need for this function in DSA, we can safely call dev_set_mtu() directly, take the rtnl lock when necessary, and just propagate whatever errors get reported (since the user probably wants to be informed). Some inspiration (mainly in the MTU DSA notifier) was taken from a vaguely similar patch from Murali and Florian, who are credited as co-developers down below. Co-developed-by: Murali Krishna Policharla <murali.policharla@broadcom.com> Signed-off-by: Murali Krishna Policharla <murali.policharla@broadcom.com> Co-developed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27 19:55:42 +00:00
if (err)
goto out_cpu_failed;
}
net: dsa: don't emit targeted cross-chip notifiers for MTU change A cross-chip notifier with "targeted_match=true" is one that matches only the local port of the switch that emitted it. In other words, passing through the cross-chip notifier layer serves no purpose. Eliminate this concept by calling directly ds->ops->port_change_mtu instead of emitting a targeted cross-chip notifier. This leaves the DSA_NOTIFIER_MTU event being emitted only for MTU updates on the CPU port, which need to be reflected also across all DSA links. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15 15:46:26 +00:00
err = ds->ops->port_change_mtu(ds, dp->index, new_mtu);
net: dsa: configure the MTU for switch ports It is useful be able to configure port policers on a switch to accept frames of various sizes: - Increase the MTU for better throughput from the default of 1500 if it is known that there is no 10/100 Mbps device in the network. - Decrease the MTU to limit the latency of high-priority frames under congestion, or work around various network segments that add extra headers to packets which can't be fragmented. For DSA slave ports, this is mostly a pass-through callback, called through the regular ndo ops and at probe time (to ensure consistency across all supported switches). The CPU port is called with an MTU equal to the largest configured MTU of the slave ports. The assumption is that the user might want to sustain a bidirectional conversation with a partner over any switch port. The DSA master is configured the same as the CPU port, plus the tagger overhead. Since the MTU is by definition L2 payload (sans Ethernet header), it is up to each individual driver to figure out if it needs to do anything special for its frame tags on the CPU port (it shouldn't except in special cases). So the MTU does not contain the tagger overhead on the CPU port. However the MTU of the DSA master, minus the tagger overhead, is used as a proxy for the MTU of the CPU port, which does not have a net device. This is to avoid uselessly calling the .change_mtu function on the CPU port when nothing should change. So it is safe to assume that the DSA master and the CPU port MTUs are apart by exactly the tagger's overhead in bytes. Some changes were made around dsa_master_set_mtu(), function which was now removed, for 2 reasons: - dev_set_mtu() already calls dev_validate_mtu(), so it's redundant to do the same thing in DSA - __dev_set_mtu() returns 0 if ops->ndo_change_mtu is an absent method That is to say, there's no need for this function in DSA, we can safely call dev_set_mtu() directly, take the rtnl lock when necessary, and just propagate whatever errors get reported (since the user probably wants to be informed). Some inspiration (mainly in the MTU DSA notifier) was taken from a vaguely similar patch from Murali and Florian, who are credited as co-developers down below. Co-developed-by: Murali Krishna Policharla <murali.policharla@broadcom.com> Signed-off-by: Murali Krishna Policharla <murali.policharla@broadcom.com> Co-developed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27 19:55:42 +00:00
if (err)
goto out_port_failed;
net: annotate writes on dev->mtu from ndo_change_mtu() Simon reported that ndo_change_mtu() methods were never updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted in commit 501a90c94510 ("inet: protect against too small mtu values.") We read dev->mtu without holding RTNL in many places, with READ_ONCE() annotations. It is time to take care of ndo_change_mtu() methods to use corresponding WRITE_ONCE() Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Simon Horman <horms@kernel.org> Closes: https://lore.kernel.org/netdev/20240505144608.GB67882@kernel.org/ Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://lore.kernel.org/r/20240506102812.3025432-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-06 10:28:12 +00:00
WRITE_ONCE(dev->mtu, new_mtu);
net: dsa: configure the MTU for switch ports It is useful be able to configure port policers on a switch to accept frames of various sizes: - Increase the MTU for better throughput from the default of 1500 if it is known that there is no 10/100 Mbps device in the network. - Decrease the MTU to limit the latency of high-priority frames under congestion, or work around various network segments that add extra headers to packets which can't be fragmented. For DSA slave ports, this is mostly a pass-through callback, called through the regular ndo ops and at probe time (to ensure consistency across all supported switches). The CPU port is called with an MTU equal to the largest configured MTU of the slave ports. The assumption is that the user might want to sustain a bidirectional conversation with a partner over any switch port. The DSA master is configured the same as the CPU port, plus the tagger overhead. Since the MTU is by definition L2 payload (sans Ethernet header), it is up to each individual driver to figure out if it needs to do anything special for its frame tags on the CPU port (it shouldn't except in special cases). So the MTU does not contain the tagger overhead on the CPU port. However the MTU of the DSA master, minus the tagger overhead, is used as a proxy for the MTU of the CPU port, which does not have a net device. This is to avoid uselessly calling the .change_mtu function on the CPU port when nothing should change. So it is safe to assume that the DSA master and the CPU port MTUs are apart by exactly the tagger's overhead in bytes. Some changes were made around dsa_master_set_mtu(), function which was now removed, for 2 reasons: - dev_set_mtu() already calls dev_validate_mtu(), so it's redundant to do the same thing in DSA - __dev_set_mtu() returns 0 if ops->ndo_change_mtu is an absent method That is to say, there's no need for this function in DSA, we can safely call dev_set_mtu() directly, take the rtnl lock when necessary, and just propagate whatever errors get reported (since the user probably wants to be informed). Some inspiration (mainly in the MTU DSA notifier) was taken from a vaguely similar patch from Murali and Florian, who are credited as co-developers down below. Co-developed-by: Murali Krishna Policharla <murali.policharla@broadcom.com> Signed-off-by: Murali Krishna Policharla <murali.policharla@broadcom.com> Co-developed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27 19:55:42 +00:00
net: dsa: implement auto-normalization of MTU for bridge hardware datapath Many switches don't have an explicit knob for configuring the MTU (maximum transmission unit per interface). Instead, they do the length-based packet admission checks on the ingress interface, for reasons that are easy to understand (why would you accept a packet in the queuing subsystem if you know you're going to drop it anyway). So it is actually the MRU that these switches permit configuring. In Linux there only exists the IFLA_MTU netlink attribute and the associated dev_set_mtu function. The comments like to play blind and say that it's changing the "maximum transfer unit", which is to say that there isn't any directionality in the meaning of the MTU word. So that is the interpretation that this patch is giving to things: MTU == MRU. When 2 interfaces having different MTUs are bridged, the bridge driver MTU auto-adjustment logic kicks in: what br_mtu_auto_adjust() does is it adjusts the MTU of the bridge net device itself (and not that of the slave net devices) to the minimum value of all slave interfaces, in order for forwarded packets to not exceed the MTU regardless of the interface they are received and send on. The idea behind this behavior, and why the slave MTUs are not adjusted, is that normal termination from Linux over the L2 forwarding domain should happen over the bridge net device, which _is_ properly limited by the minimum MTU. And termination over individual slave devices is possible even if those are bridged. But that is not "forwarding", so there's no reason to do normalization there, since only a single interface sees that packet. The problem with those switches that can only control the MRU is with the offloaded data path, where a packet received on an interface with MRU 9000 would still be forwarded to an interface with MRU 1500. And the br_mtu_auto_adjust() function does not really help, since the MTU configured on the bridge net device is ignored. In order to enforce the de-facto MTU == MRU rule for these switches, we need to do MTU normalization, which means: in order for no packet larger than the MTU configured on this port to be sent, then we need to limit the MRU on all ports that this packet could possibly come from. AKA since we are configuring the MRU via MTU, it means that all ports within a bridge forwarding domain should have the same MTU. And that is exactly what this patch is trying to do. >From an implementation perspective, we try to follow the intent of the user, otherwise there is a risk that we might livelock them (they try to change the MTU on an already-bridged interface, but we just keep changing it back in an attempt to keep the MTU normalized). So the MTU that the bridge is normalized to is either: - The most recently changed one: ip link set dev swp0 master br0 ip link set dev swp1 master br0 ip link set dev swp0 mtu 1400 This sequence will make swp1 inherit MTU 1400 from swp0. - The one of the most recently added interface to the bridge: ip link set dev swp0 master br0 ip link set dev swp1 mtu 1400 ip link set dev swp1 master br0 The above sequence will make swp0 inherit MTU 1400 as well. Suggested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27 19:55:43 +00:00
dsa_bridge_mtu_normalization(dp);
net: dsa: configure the MTU for switch ports It is useful be able to configure port policers on a switch to accept frames of various sizes: - Increase the MTU for better throughput from the default of 1500 if it is known that there is no 10/100 Mbps device in the network. - Decrease the MTU to limit the latency of high-priority frames under congestion, or work around various network segments that add extra headers to packets which can't be fragmented. For DSA slave ports, this is mostly a pass-through callback, called through the regular ndo ops and at probe time (to ensure consistency across all supported switches). The CPU port is called with an MTU equal to the largest configured MTU of the slave ports. The assumption is that the user might want to sustain a bidirectional conversation with a partner over any switch port. The DSA master is configured the same as the CPU port, plus the tagger overhead. Since the MTU is by definition L2 payload (sans Ethernet header), it is up to each individual driver to figure out if it needs to do anything special for its frame tags on the CPU port (it shouldn't except in special cases). So the MTU does not contain the tagger overhead on the CPU port. However the MTU of the DSA master, minus the tagger overhead, is used as a proxy for the MTU of the CPU port, which does not have a net device. This is to avoid uselessly calling the .change_mtu function on the CPU port when nothing should change. So it is safe to assume that the DSA master and the CPU port MTUs are apart by exactly the tagger's overhead in bytes. Some changes were made around dsa_master_set_mtu(), function which was now removed, for 2 reasons: - dev_set_mtu() already calls dev_validate_mtu(), so it's redundant to do the same thing in DSA - __dev_set_mtu() returns 0 if ops->ndo_change_mtu is an absent method That is to say, there's no need for this function in DSA, we can safely call dev_set_mtu() directly, take the rtnl lock when necessary, and just propagate whatever errors get reported (since the user probably wants to be informed). Some inspiration (mainly in the MTU DSA notifier) was taken from a vaguely similar patch from Murali and Florian, who are credited as co-developers down below. Co-developed-by: Murali Krishna Policharla <murali.policharla@broadcom.com> Signed-off-by: Murali Krishna Policharla <murali.policharla@broadcom.com> Co-developed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27 19:55:42 +00:00
return 0;
out_port_failed:
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
if (new_conduit_mtu != old_conduit_mtu)
dsa_port_mtu_change(cpu_dp, old_conduit_mtu - overhead);
net: dsa: configure the MTU for switch ports It is useful be able to configure port policers on a switch to accept frames of various sizes: - Increase the MTU for better throughput from the default of 1500 if it is known that there is no 10/100 Mbps device in the network. - Decrease the MTU to limit the latency of high-priority frames under congestion, or work around various network segments that add extra headers to packets which can't be fragmented. For DSA slave ports, this is mostly a pass-through callback, called through the regular ndo ops and at probe time (to ensure consistency across all supported switches). The CPU port is called with an MTU equal to the largest configured MTU of the slave ports. The assumption is that the user might want to sustain a bidirectional conversation with a partner over any switch port. The DSA master is configured the same as the CPU port, plus the tagger overhead. Since the MTU is by definition L2 payload (sans Ethernet header), it is up to each individual driver to figure out if it needs to do anything special for its frame tags on the CPU port (it shouldn't except in special cases). So the MTU does not contain the tagger overhead on the CPU port. However the MTU of the DSA master, minus the tagger overhead, is used as a proxy for the MTU of the CPU port, which does not have a net device. This is to avoid uselessly calling the .change_mtu function on the CPU port when nothing should change. So it is safe to assume that the DSA master and the CPU port MTUs are apart by exactly the tagger's overhead in bytes. Some changes were made around dsa_master_set_mtu(), function which was now removed, for 2 reasons: - dev_set_mtu() already calls dev_validate_mtu(), so it's redundant to do the same thing in DSA - __dev_set_mtu() returns 0 if ops->ndo_change_mtu is an absent method That is to say, there's no need for this function in DSA, we can safely call dev_set_mtu() directly, take the rtnl lock when necessary, and just propagate whatever errors get reported (since the user probably wants to be informed). Some inspiration (mainly in the MTU DSA notifier) was taken from a vaguely similar patch from Murali and Florian, who are credited as co-developers down below. Co-developed-by: Murali Krishna Policharla <murali.policharla@broadcom.com> Signed-off-by: Murali Krishna Policharla <murali.policharla@broadcom.com> Co-developed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27 19:55:42 +00:00
out_cpu_failed:
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
if (new_conduit_mtu != old_conduit_mtu)
dev_set_mtu(conduit, old_conduit_mtu);
out_conduit_failed:
net: dsa: configure the MTU for switch ports It is useful be able to configure port policers on a switch to accept frames of various sizes: - Increase the MTU for better throughput from the default of 1500 if it is known that there is no 10/100 Mbps device in the network. - Decrease the MTU to limit the latency of high-priority frames under congestion, or work around various network segments that add extra headers to packets which can't be fragmented. For DSA slave ports, this is mostly a pass-through callback, called through the regular ndo ops and at probe time (to ensure consistency across all supported switches). The CPU port is called with an MTU equal to the largest configured MTU of the slave ports. The assumption is that the user might want to sustain a bidirectional conversation with a partner over any switch port. The DSA master is configured the same as the CPU port, plus the tagger overhead. Since the MTU is by definition L2 payload (sans Ethernet header), it is up to each individual driver to figure out if it needs to do anything special for its frame tags on the CPU port (it shouldn't except in special cases). So the MTU does not contain the tagger overhead on the CPU port. However the MTU of the DSA master, minus the tagger overhead, is used as a proxy for the MTU of the CPU port, which does not have a net device. This is to avoid uselessly calling the .change_mtu function on the CPU port when nothing should change. So it is safe to assume that the DSA master and the CPU port MTUs are apart by exactly the tagger's overhead in bytes. Some changes were made around dsa_master_set_mtu(), function which was now removed, for 2 reasons: - dev_set_mtu() already calls dev_validate_mtu(), so it's redundant to do the same thing in DSA - __dev_set_mtu() returns 0 if ops->ndo_change_mtu is an absent method That is to say, there's no need for this function in DSA, we can safely call dev_set_mtu() directly, take the rtnl lock when necessary, and just propagate whatever errors get reported (since the user probably wants to be informed). Some inspiration (mainly in the MTU DSA notifier) was taken from a vaguely similar patch from Murali and Florian, who are credited as co-developers down below. Co-developed-by: Murali Krishna Policharla <murali.policharla@broadcom.com> Signed-off-by: Murali Krishna Policharla <murali.policharla@broadcom.com> Co-developed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27 19:55:42 +00:00
return err;
}
net: dsa: add support for DCB get/set apptrust configuration Add DCB support to get/set trust configuration for different packet priority information sources. Some switch allow to chose different source of packet priority classification. For example on KSZ switches it is possible to configure VLAN PCP and/or DSCP sources. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-05-03 13:13:40 +00:00
static int __maybe_unused
dsa_user_dcbnl_set_apptrust(struct net_device *dev, u8 *sel, int nsel)
{
struct dsa_port *dp = dsa_user_to_port(dev);
struct dsa_switch *ds = dp->ds;
int port = dp->index;
if (!ds->ops->port_set_apptrust)
return -EOPNOTSUPP;
return ds->ops->port_set_apptrust(ds, port, sel, nsel);
}
static int __maybe_unused
dsa_user_dcbnl_get_apptrust(struct net_device *dev, u8 *sel, int *nsel)
{
struct dsa_port *dp = dsa_user_to_port(dev);
struct dsa_switch *ds = dp->ds;
int port = dp->index;
if (!ds->ops->port_get_apptrust)
return -EOPNOTSUPP;
return ds->ops->port_get_apptrust(ds, port, sel, nsel);
}
net: dsa: report and change port default priority using dcbnl The port-based default QoS class is assigned to packets that lack a VLAN PCP (or the port is configured to not trust the VLAN PCP), an IP DSCP (or the port is configured to not trust IP DSCP), and packets on which no tc-skbedit action has matched. Similar to other drivers, this can be exposed to user space using the DCB Application Priority Table. IEEE 802.1Q-2018 specifies in Table D-8 - Sel field values that when the Selector is 1, the Protocol ID value of 0 denotes the "Default application priority. For use when application priority is not otherwise specified." The way in which the dcbnl integration in DSA has been designed has to do with its requirements. Andrew Lunn explains that SOHO switches are expected to come with some sort of pre-configured QoS profile, and that it is desirable for this to come pre-loaded into the DSA slave interfaces' DCB application priority table. In the dcbnl design, this is possible because calls to dcb_ieee_setapp() can be initiated by anyone including being self-initiated by this device driver. However, what makes this challenging to implement in DSA is that the DSA core manages the net_devices (effectively hiding them from drivers), while drivers manage the hardware. The DSA core has no knowledge of what individual drivers' QoS policies are. DSA could export to drivers a wrapper over dcb_ieee_setapp() and these could call that function to pre-populate the app priority table, however drivers don't have a good moment in time to do this. The dsa_switch_ops :: setup() method gets called before the net_devices are created (dsa_slave_create), and so is dsa_switch_ops :: port_setup(). What remains is dsa_switch_ops :: port_enable(), but this gets called upon each ndo_open. If we add app table entries on every open, we'd need to remove them on close, to avoid duplicate entry errors. But if we delete app priority entries on close, what we delete may not be the initial, driver pre-populated entries, but rather user-added entries. So it is clear that letting drivers choose the timing of the dcb_ieee_setapp() call is inappropriate. The alternative which was chosen is to introduce hardware-specific ops in dsa_switch_ops, and effectively hide dcbnl details from drivers as well. For pre-populating the application table, dsa_slave_dcbnl_init() will call ds->ops->port_get_default_prio() which is supposed to read from hardware. If the operation succeeds, DSA creates a default-prio app table entry. The method is called as soon as the slave_dev is registered, but before we release the rtnl_mutex. This is done such that user space sees the app table entries as soon as it sees the interface being registered. The fact that we populate slave_dev->dcbnl_ops with a non-NULL pointer changes behavior in dcb_doit() from net/dcb/dcbnl.c, which used to return -EOPNOTSUPP for any dcbnl operation where netdev->dcbnl_ops is NULL. Because there are still dcbnl-unaware DSA drivers even if they have dcbnl_ops populated, the way to restore the behavior is to make all dcbnl_ops return -EOPNOTSUPP on absence of the hardware-specific dsa_switch_ops method. The dcbnl framework absurdly allows there to be more than one app table entry for the same selector and protocol (in other words, more than one port-based default priority). In the iproute2 dcb program, there is a "replace" syntactical sugar command which performs an "add" and a "del" to hide this away. But we choose the largest configured priority when we call ds->ops->port_set_default_prio(), using __fls(). When there is no default-prio app table entry left, the port-default priority is restored to 0. Link: https://patchwork.kernel.org/project/netdevbpf/patch/20210113154139.1803705-2-olteanv@gmail.com/ Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-11 21:15:18 +00:00
static int __maybe_unused
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dsa_user_dcbnl_set_default_prio(struct net_device *dev, struct dcb_app *app)
net: dsa: report and change port default priority using dcbnl The port-based default QoS class is assigned to packets that lack a VLAN PCP (or the port is configured to not trust the VLAN PCP), an IP DSCP (or the port is configured to not trust IP DSCP), and packets on which no tc-skbedit action has matched. Similar to other drivers, this can be exposed to user space using the DCB Application Priority Table. IEEE 802.1Q-2018 specifies in Table D-8 - Sel field values that when the Selector is 1, the Protocol ID value of 0 denotes the "Default application priority. For use when application priority is not otherwise specified." The way in which the dcbnl integration in DSA has been designed has to do with its requirements. Andrew Lunn explains that SOHO switches are expected to come with some sort of pre-configured QoS profile, and that it is desirable for this to come pre-loaded into the DSA slave interfaces' DCB application priority table. In the dcbnl design, this is possible because calls to dcb_ieee_setapp() can be initiated by anyone including being self-initiated by this device driver. However, what makes this challenging to implement in DSA is that the DSA core manages the net_devices (effectively hiding them from drivers), while drivers manage the hardware. The DSA core has no knowledge of what individual drivers' QoS policies are. DSA could export to drivers a wrapper over dcb_ieee_setapp() and these could call that function to pre-populate the app priority table, however drivers don't have a good moment in time to do this. The dsa_switch_ops :: setup() method gets called before the net_devices are created (dsa_slave_create), and so is dsa_switch_ops :: port_setup(). What remains is dsa_switch_ops :: port_enable(), but this gets called upon each ndo_open. If we add app table entries on every open, we'd need to remove them on close, to avoid duplicate entry errors. But if we delete app priority entries on close, what we delete may not be the initial, driver pre-populated entries, but rather user-added entries. So it is clear that letting drivers choose the timing of the dcb_ieee_setapp() call is inappropriate. The alternative which was chosen is to introduce hardware-specific ops in dsa_switch_ops, and effectively hide dcbnl details from drivers as well. For pre-populating the application table, dsa_slave_dcbnl_init() will call ds->ops->port_get_default_prio() which is supposed to read from hardware. If the operation succeeds, DSA creates a default-prio app table entry. The method is called as soon as the slave_dev is registered, but before we release the rtnl_mutex. This is done such that user space sees the app table entries as soon as it sees the interface being registered. The fact that we populate slave_dev->dcbnl_ops with a non-NULL pointer changes behavior in dcb_doit() from net/dcb/dcbnl.c, which used to return -EOPNOTSUPP for any dcbnl operation where netdev->dcbnl_ops is NULL. Because there are still dcbnl-unaware DSA drivers even if they have dcbnl_ops populated, the way to restore the behavior is to make all dcbnl_ops return -EOPNOTSUPP on absence of the hardware-specific dsa_switch_ops method. The dcbnl framework absurdly allows there to be more than one app table entry for the same selector and protocol (in other words, more than one port-based default priority). In the iproute2 dcb program, there is a "replace" syntactical sugar command which performs an "add" and a "del" to hide this away. But we choose the largest configured priority when we call ds->ops->port_set_default_prio(), using __fls(). When there is no default-prio app table entry left, the port-default priority is restored to 0. Link: https://patchwork.kernel.org/project/netdevbpf/patch/20210113154139.1803705-2-olteanv@gmail.com/ Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-11 21:15:18 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: report and change port default priority using dcbnl The port-based default QoS class is assigned to packets that lack a VLAN PCP (or the port is configured to not trust the VLAN PCP), an IP DSCP (or the port is configured to not trust IP DSCP), and packets on which no tc-skbedit action has matched. Similar to other drivers, this can be exposed to user space using the DCB Application Priority Table. IEEE 802.1Q-2018 specifies in Table D-8 - Sel field values that when the Selector is 1, the Protocol ID value of 0 denotes the "Default application priority. For use when application priority is not otherwise specified." The way in which the dcbnl integration in DSA has been designed has to do with its requirements. Andrew Lunn explains that SOHO switches are expected to come with some sort of pre-configured QoS profile, and that it is desirable for this to come pre-loaded into the DSA slave interfaces' DCB application priority table. In the dcbnl design, this is possible because calls to dcb_ieee_setapp() can be initiated by anyone including being self-initiated by this device driver. However, what makes this challenging to implement in DSA is that the DSA core manages the net_devices (effectively hiding them from drivers), while drivers manage the hardware. The DSA core has no knowledge of what individual drivers' QoS policies are. DSA could export to drivers a wrapper over dcb_ieee_setapp() and these could call that function to pre-populate the app priority table, however drivers don't have a good moment in time to do this. The dsa_switch_ops :: setup() method gets called before the net_devices are created (dsa_slave_create), and so is dsa_switch_ops :: port_setup(). What remains is dsa_switch_ops :: port_enable(), but this gets called upon each ndo_open. If we add app table entries on every open, we'd need to remove them on close, to avoid duplicate entry errors. But if we delete app priority entries on close, what we delete may not be the initial, driver pre-populated entries, but rather user-added entries. So it is clear that letting drivers choose the timing of the dcb_ieee_setapp() call is inappropriate. The alternative which was chosen is to introduce hardware-specific ops in dsa_switch_ops, and effectively hide dcbnl details from drivers as well. For pre-populating the application table, dsa_slave_dcbnl_init() will call ds->ops->port_get_default_prio() which is supposed to read from hardware. If the operation succeeds, DSA creates a default-prio app table entry. The method is called as soon as the slave_dev is registered, but before we release the rtnl_mutex. This is done such that user space sees the app table entries as soon as it sees the interface being registered. The fact that we populate slave_dev->dcbnl_ops with a non-NULL pointer changes behavior in dcb_doit() from net/dcb/dcbnl.c, which used to return -EOPNOTSUPP for any dcbnl operation where netdev->dcbnl_ops is NULL. Because there are still dcbnl-unaware DSA drivers even if they have dcbnl_ops populated, the way to restore the behavior is to make all dcbnl_ops return -EOPNOTSUPP on absence of the hardware-specific dsa_switch_ops method. The dcbnl framework absurdly allows there to be more than one app table entry for the same selector and protocol (in other words, more than one port-based default priority). In the iproute2 dcb program, there is a "replace" syntactical sugar command which performs an "add" and a "del" to hide this away. But we choose the largest configured priority when we call ds->ops->port_set_default_prio(), using __fls(). When there is no default-prio app table entry left, the port-default priority is restored to 0. Link: https://patchwork.kernel.org/project/netdevbpf/patch/20210113154139.1803705-2-olteanv@gmail.com/ Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-11 21:15:18 +00:00
struct dsa_switch *ds = dp->ds;
unsigned long mask, new_prio;
int err, port = dp->index;
if (!ds->ops->port_set_default_prio)
return -EOPNOTSUPP;
err = dcb_ieee_setapp(dev, app);
if (err)
return err;
mask = dcb_ieee_getapp_mask(dev, app);
new_prio = __fls(mask);
err = ds->ops->port_set_default_prio(ds, port, new_prio);
if (err) {
dcb_ieee_delapp(dev, app);
return err;
}
return 0;
}
net: dsa: add support switches global DSCP priority mapping Some switches like Microchip KSZ variants do not support per port DSCP priority configuration. Instead there is a global DSCP mapping table. To handle it, we will accept set/del request to any of user ports to make global configuration and update dcb app entries for all other ports. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-05-03 13:13:49 +00:00
/* Update the DSCP prio entries on all user ports of the switch in case
* the switch supports global DSCP prio instead of per port DSCP prios.
*/
static int dsa_user_dcbnl_ieee_global_dscp_setdel(struct net_device *dev,
struct dcb_app *app, bool del)
{
int (*setdel)(struct net_device *dev, struct dcb_app *app);
struct dsa_port *dp = dsa_user_to_port(dev);
struct dsa_switch *ds = dp->ds;
struct dsa_port *other_dp;
int err, restore_err;
if (del)
setdel = dcb_ieee_delapp;
else
setdel = dcb_ieee_setapp;
dsa_switch_for_each_user_port(other_dp, ds) {
struct net_device *user = other_dp->user;
if (!user || user == dev)
continue;
err = setdel(user, app);
if (err)
goto err_try_to_restore;
}
return 0;
err_try_to_restore:
/* Revert logic to restore previous state of app entries */
if (!del)
setdel = dcb_ieee_delapp;
else
setdel = dcb_ieee_setapp;
dsa_switch_for_each_user_port_continue_reverse(other_dp, ds) {
struct net_device *user = other_dp->user;
if (!user || user == dev)
continue;
restore_err = setdel(user, app);
if (restore_err)
netdev_err(user, "Failed to restore DSCP prio entry configuration\n");
}
return err;
}
net: dsa: report and change port dscp priority using dcbnl Similar to the port-based default priority, IEEE 802.1Q-2018 allows the Application Priority Table to define QoS classes (0 to 7) per IP DSCP value (0 to 63). In the absence of an app table entry for a packet with DSCP value X, QoS classification for that packet falls back to other methods (VLAN PCP or port-based default). The presence of an app table for DSCP value X with priority Y makes the hardware classify the packet to QoS class Y. As opposed to the default-prio where DSA exposes only a "set" in dsa_switch_ops (because the port-based default is the fallback, it always exists, either implicitly or explicitly), for DSCP priorities we expose an "add" and a "del". The addition of a DSCP entry means trusting that DSCP priority, the deletion means ignoring it. Drivers that already trust (at least some) DSCP values can describe their configuration in dsa_switch_ops :: port_get_dscp_prio(), which is called for each DSCP value from 0 to 63. Again, there can be more than one dcbnl app table entry for the same DSCP value, DSA chooses the one with the largest configured priority. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-11 21:15:19 +00:00
static int __maybe_unused
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dsa_user_dcbnl_add_dscp_prio(struct net_device *dev, struct dcb_app *app)
net: dsa: report and change port dscp priority using dcbnl Similar to the port-based default priority, IEEE 802.1Q-2018 allows the Application Priority Table to define QoS classes (0 to 7) per IP DSCP value (0 to 63). In the absence of an app table entry for a packet with DSCP value X, QoS classification for that packet falls back to other methods (VLAN PCP or port-based default). The presence of an app table for DSCP value X with priority Y makes the hardware classify the packet to QoS class Y. As opposed to the default-prio where DSA exposes only a "set" in dsa_switch_ops (because the port-based default is the fallback, it always exists, either implicitly or explicitly), for DSCP priorities we expose an "add" and a "del". The addition of a DSCP entry means trusting that DSCP priority, the deletion means ignoring it. Drivers that already trust (at least some) DSCP values can describe their configuration in dsa_switch_ops :: port_get_dscp_prio(), which is called for each DSCP value from 0 to 63. Again, there can be more than one dcbnl app table entry for the same DSCP value, DSA chooses the one with the largest configured priority. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-11 21:15:19 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: report and change port dscp priority using dcbnl Similar to the port-based default priority, IEEE 802.1Q-2018 allows the Application Priority Table to define QoS classes (0 to 7) per IP DSCP value (0 to 63). In the absence of an app table entry for a packet with DSCP value X, QoS classification for that packet falls back to other methods (VLAN PCP or port-based default). The presence of an app table for DSCP value X with priority Y makes the hardware classify the packet to QoS class Y. As opposed to the default-prio where DSA exposes only a "set" in dsa_switch_ops (because the port-based default is the fallback, it always exists, either implicitly or explicitly), for DSCP priorities we expose an "add" and a "del". The addition of a DSCP entry means trusting that DSCP priority, the deletion means ignoring it. Drivers that already trust (at least some) DSCP values can describe their configuration in dsa_switch_ops :: port_get_dscp_prio(), which is called for each DSCP value from 0 to 63. Again, there can be more than one dcbnl app table entry for the same DSCP value, DSA chooses the one with the largest configured priority. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-11 21:15:19 +00:00
struct dsa_switch *ds = dp->ds;
unsigned long mask, new_prio;
int err, port = dp->index;
u8 dscp = app->protocol;
if (!ds->ops->port_add_dscp_prio)
return -EOPNOTSUPP;
if (dscp >= 64) {
netdev_err(dev, "DSCP APP entry with protocol value %u is invalid\n",
dscp);
return -EINVAL;
}
err = dcb_ieee_setapp(dev, app);
if (err)
return err;
mask = dcb_ieee_getapp_mask(dev, app);
new_prio = __fls(mask);
err = ds->ops->port_add_dscp_prio(ds, port, dscp, new_prio);
if (err) {
dcb_ieee_delapp(dev, app);
return err;
}
net: dsa: add support switches global DSCP priority mapping Some switches like Microchip KSZ variants do not support per port DSCP priority configuration. Instead there is a global DSCP mapping table. To handle it, we will accept set/del request to any of user ports to make global configuration and update dcb app entries for all other ports. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-05-03 13:13:49 +00:00
if (!ds->dscp_prio_mapping_is_global)
return 0;
err = dsa_user_dcbnl_ieee_global_dscp_setdel(dev, app, false);
if (err) {
if (ds->ops->port_del_dscp_prio)
ds->ops->port_del_dscp_prio(ds, port, dscp, new_prio);
dcb_ieee_delapp(dev, app);
return err;
}
net: dsa: report and change port dscp priority using dcbnl Similar to the port-based default priority, IEEE 802.1Q-2018 allows the Application Priority Table to define QoS classes (0 to 7) per IP DSCP value (0 to 63). In the absence of an app table entry for a packet with DSCP value X, QoS classification for that packet falls back to other methods (VLAN PCP or port-based default). The presence of an app table for DSCP value X with priority Y makes the hardware classify the packet to QoS class Y. As opposed to the default-prio where DSA exposes only a "set" in dsa_switch_ops (because the port-based default is the fallback, it always exists, either implicitly or explicitly), for DSCP priorities we expose an "add" and a "del". The addition of a DSCP entry means trusting that DSCP priority, the deletion means ignoring it. Drivers that already trust (at least some) DSCP values can describe their configuration in dsa_switch_ops :: port_get_dscp_prio(), which is called for each DSCP value from 0 to 63. Again, there can be more than one dcbnl app table entry for the same DSCP value, DSA chooses the one with the largest configured priority. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-11 21:15:19 +00:00
return 0;
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int __maybe_unused dsa_user_dcbnl_ieee_setapp(struct net_device *dev,
struct dcb_app *app)
net: dsa: report and change port default priority using dcbnl The port-based default QoS class is assigned to packets that lack a VLAN PCP (or the port is configured to not trust the VLAN PCP), an IP DSCP (or the port is configured to not trust IP DSCP), and packets on which no tc-skbedit action has matched. Similar to other drivers, this can be exposed to user space using the DCB Application Priority Table. IEEE 802.1Q-2018 specifies in Table D-8 - Sel field values that when the Selector is 1, the Protocol ID value of 0 denotes the "Default application priority. For use when application priority is not otherwise specified." The way in which the dcbnl integration in DSA has been designed has to do with its requirements. Andrew Lunn explains that SOHO switches are expected to come with some sort of pre-configured QoS profile, and that it is desirable for this to come pre-loaded into the DSA slave interfaces' DCB application priority table. In the dcbnl design, this is possible because calls to dcb_ieee_setapp() can be initiated by anyone including being self-initiated by this device driver. However, what makes this challenging to implement in DSA is that the DSA core manages the net_devices (effectively hiding them from drivers), while drivers manage the hardware. The DSA core has no knowledge of what individual drivers' QoS policies are. DSA could export to drivers a wrapper over dcb_ieee_setapp() and these could call that function to pre-populate the app priority table, however drivers don't have a good moment in time to do this. The dsa_switch_ops :: setup() method gets called before the net_devices are created (dsa_slave_create), and so is dsa_switch_ops :: port_setup(). What remains is dsa_switch_ops :: port_enable(), but this gets called upon each ndo_open. If we add app table entries on every open, we'd need to remove them on close, to avoid duplicate entry errors. But if we delete app priority entries on close, what we delete may not be the initial, driver pre-populated entries, but rather user-added entries. So it is clear that letting drivers choose the timing of the dcb_ieee_setapp() call is inappropriate. The alternative which was chosen is to introduce hardware-specific ops in dsa_switch_ops, and effectively hide dcbnl details from drivers as well. For pre-populating the application table, dsa_slave_dcbnl_init() will call ds->ops->port_get_default_prio() which is supposed to read from hardware. If the operation succeeds, DSA creates a default-prio app table entry. The method is called as soon as the slave_dev is registered, but before we release the rtnl_mutex. This is done such that user space sees the app table entries as soon as it sees the interface being registered. The fact that we populate slave_dev->dcbnl_ops with a non-NULL pointer changes behavior in dcb_doit() from net/dcb/dcbnl.c, which used to return -EOPNOTSUPP for any dcbnl operation where netdev->dcbnl_ops is NULL. Because there are still dcbnl-unaware DSA drivers even if they have dcbnl_ops populated, the way to restore the behavior is to make all dcbnl_ops return -EOPNOTSUPP on absence of the hardware-specific dsa_switch_ops method. The dcbnl framework absurdly allows there to be more than one app table entry for the same selector and protocol (in other words, more than one port-based default priority). In the iproute2 dcb program, there is a "replace" syntactical sugar command which performs an "add" and a "del" to hide this away. But we choose the largest configured priority when we call ds->ops->port_set_default_prio(), using __fls(). When there is no default-prio app table entry left, the port-default priority is restored to 0. Link: https://patchwork.kernel.org/project/netdevbpf/patch/20210113154139.1803705-2-olteanv@gmail.com/ Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-11 21:15:18 +00:00
{
switch (app->selector) {
case IEEE_8021QAZ_APP_SEL_ETHERTYPE:
switch (app->protocol) {
case 0:
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
return dsa_user_dcbnl_set_default_prio(dev, app);
net: dsa: report and change port default priority using dcbnl The port-based default QoS class is assigned to packets that lack a VLAN PCP (or the port is configured to not trust the VLAN PCP), an IP DSCP (or the port is configured to not trust IP DSCP), and packets on which no tc-skbedit action has matched. Similar to other drivers, this can be exposed to user space using the DCB Application Priority Table. IEEE 802.1Q-2018 specifies in Table D-8 - Sel field values that when the Selector is 1, the Protocol ID value of 0 denotes the "Default application priority. For use when application priority is not otherwise specified." The way in which the dcbnl integration in DSA has been designed has to do with its requirements. Andrew Lunn explains that SOHO switches are expected to come with some sort of pre-configured QoS profile, and that it is desirable for this to come pre-loaded into the DSA slave interfaces' DCB application priority table. In the dcbnl design, this is possible because calls to dcb_ieee_setapp() can be initiated by anyone including being self-initiated by this device driver. However, what makes this challenging to implement in DSA is that the DSA core manages the net_devices (effectively hiding them from drivers), while drivers manage the hardware. The DSA core has no knowledge of what individual drivers' QoS policies are. DSA could export to drivers a wrapper over dcb_ieee_setapp() and these could call that function to pre-populate the app priority table, however drivers don't have a good moment in time to do this. The dsa_switch_ops :: setup() method gets called before the net_devices are created (dsa_slave_create), and so is dsa_switch_ops :: port_setup(). What remains is dsa_switch_ops :: port_enable(), but this gets called upon each ndo_open. If we add app table entries on every open, we'd need to remove them on close, to avoid duplicate entry errors. But if we delete app priority entries on close, what we delete may not be the initial, driver pre-populated entries, but rather user-added entries. So it is clear that letting drivers choose the timing of the dcb_ieee_setapp() call is inappropriate. The alternative which was chosen is to introduce hardware-specific ops in dsa_switch_ops, and effectively hide dcbnl details from drivers as well. For pre-populating the application table, dsa_slave_dcbnl_init() will call ds->ops->port_get_default_prio() which is supposed to read from hardware. If the operation succeeds, DSA creates a default-prio app table entry. The method is called as soon as the slave_dev is registered, but before we release the rtnl_mutex. This is done such that user space sees the app table entries as soon as it sees the interface being registered. The fact that we populate slave_dev->dcbnl_ops with a non-NULL pointer changes behavior in dcb_doit() from net/dcb/dcbnl.c, which used to return -EOPNOTSUPP for any dcbnl operation where netdev->dcbnl_ops is NULL. Because there are still dcbnl-unaware DSA drivers even if they have dcbnl_ops populated, the way to restore the behavior is to make all dcbnl_ops return -EOPNOTSUPP on absence of the hardware-specific dsa_switch_ops method. The dcbnl framework absurdly allows there to be more than one app table entry for the same selector and protocol (in other words, more than one port-based default priority). In the iproute2 dcb program, there is a "replace" syntactical sugar command which performs an "add" and a "del" to hide this away. But we choose the largest configured priority when we call ds->ops->port_set_default_prio(), using __fls(). When there is no default-prio app table entry left, the port-default priority is restored to 0. Link: https://patchwork.kernel.org/project/netdevbpf/patch/20210113154139.1803705-2-olteanv@gmail.com/ Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-11 21:15:18 +00:00
default:
return -EOPNOTSUPP;
}
break;
net: dsa: report and change port dscp priority using dcbnl Similar to the port-based default priority, IEEE 802.1Q-2018 allows the Application Priority Table to define QoS classes (0 to 7) per IP DSCP value (0 to 63). In the absence of an app table entry for a packet with DSCP value X, QoS classification for that packet falls back to other methods (VLAN PCP or port-based default). The presence of an app table for DSCP value X with priority Y makes the hardware classify the packet to QoS class Y. As opposed to the default-prio where DSA exposes only a "set" in dsa_switch_ops (because the port-based default is the fallback, it always exists, either implicitly or explicitly), for DSCP priorities we expose an "add" and a "del". The addition of a DSCP entry means trusting that DSCP priority, the deletion means ignoring it. Drivers that already trust (at least some) DSCP values can describe their configuration in dsa_switch_ops :: port_get_dscp_prio(), which is called for each DSCP value from 0 to 63. Again, there can be more than one dcbnl app table entry for the same DSCP value, DSA chooses the one with the largest configured priority. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-11 21:15:19 +00:00
case IEEE_8021QAZ_APP_SEL_DSCP:
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
return dsa_user_dcbnl_add_dscp_prio(dev, app);
net: dsa: report and change port default priority using dcbnl The port-based default QoS class is assigned to packets that lack a VLAN PCP (or the port is configured to not trust the VLAN PCP), an IP DSCP (or the port is configured to not trust IP DSCP), and packets on which no tc-skbedit action has matched. Similar to other drivers, this can be exposed to user space using the DCB Application Priority Table. IEEE 802.1Q-2018 specifies in Table D-8 - Sel field values that when the Selector is 1, the Protocol ID value of 0 denotes the "Default application priority. For use when application priority is not otherwise specified." The way in which the dcbnl integration in DSA has been designed has to do with its requirements. Andrew Lunn explains that SOHO switches are expected to come with some sort of pre-configured QoS profile, and that it is desirable for this to come pre-loaded into the DSA slave interfaces' DCB application priority table. In the dcbnl design, this is possible because calls to dcb_ieee_setapp() can be initiated by anyone including being self-initiated by this device driver. However, what makes this challenging to implement in DSA is that the DSA core manages the net_devices (effectively hiding them from drivers), while drivers manage the hardware. The DSA core has no knowledge of what individual drivers' QoS policies are. DSA could export to drivers a wrapper over dcb_ieee_setapp() and these could call that function to pre-populate the app priority table, however drivers don't have a good moment in time to do this. The dsa_switch_ops :: setup() method gets called before the net_devices are created (dsa_slave_create), and so is dsa_switch_ops :: port_setup(). What remains is dsa_switch_ops :: port_enable(), but this gets called upon each ndo_open. If we add app table entries on every open, we'd need to remove them on close, to avoid duplicate entry errors. But if we delete app priority entries on close, what we delete may not be the initial, driver pre-populated entries, but rather user-added entries. So it is clear that letting drivers choose the timing of the dcb_ieee_setapp() call is inappropriate. The alternative which was chosen is to introduce hardware-specific ops in dsa_switch_ops, and effectively hide dcbnl details from drivers as well. For pre-populating the application table, dsa_slave_dcbnl_init() will call ds->ops->port_get_default_prio() which is supposed to read from hardware. If the operation succeeds, DSA creates a default-prio app table entry. The method is called as soon as the slave_dev is registered, but before we release the rtnl_mutex. This is done such that user space sees the app table entries as soon as it sees the interface being registered. The fact that we populate slave_dev->dcbnl_ops with a non-NULL pointer changes behavior in dcb_doit() from net/dcb/dcbnl.c, which used to return -EOPNOTSUPP for any dcbnl operation where netdev->dcbnl_ops is NULL. Because there are still dcbnl-unaware DSA drivers even if they have dcbnl_ops populated, the way to restore the behavior is to make all dcbnl_ops return -EOPNOTSUPP on absence of the hardware-specific dsa_switch_ops method. The dcbnl framework absurdly allows there to be more than one app table entry for the same selector and protocol (in other words, more than one port-based default priority). In the iproute2 dcb program, there is a "replace" syntactical sugar command which performs an "add" and a "del" to hide this away. But we choose the largest configured priority when we call ds->ops->port_set_default_prio(), using __fls(). When there is no default-prio app table entry left, the port-default priority is restored to 0. Link: https://patchwork.kernel.org/project/netdevbpf/patch/20210113154139.1803705-2-olteanv@gmail.com/ Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-11 21:15:18 +00:00
default:
return -EOPNOTSUPP;
}
}
static int __maybe_unused
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dsa_user_dcbnl_del_default_prio(struct net_device *dev, struct dcb_app *app)
net: dsa: report and change port default priority using dcbnl The port-based default QoS class is assigned to packets that lack a VLAN PCP (or the port is configured to not trust the VLAN PCP), an IP DSCP (or the port is configured to not trust IP DSCP), and packets on which no tc-skbedit action has matched. Similar to other drivers, this can be exposed to user space using the DCB Application Priority Table. IEEE 802.1Q-2018 specifies in Table D-8 - Sel field values that when the Selector is 1, the Protocol ID value of 0 denotes the "Default application priority. For use when application priority is not otherwise specified." The way in which the dcbnl integration in DSA has been designed has to do with its requirements. Andrew Lunn explains that SOHO switches are expected to come with some sort of pre-configured QoS profile, and that it is desirable for this to come pre-loaded into the DSA slave interfaces' DCB application priority table. In the dcbnl design, this is possible because calls to dcb_ieee_setapp() can be initiated by anyone including being self-initiated by this device driver. However, what makes this challenging to implement in DSA is that the DSA core manages the net_devices (effectively hiding them from drivers), while drivers manage the hardware. The DSA core has no knowledge of what individual drivers' QoS policies are. DSA could export to drivers a wrapper over dcb_ieee_setapp() and these could call that function to pre-populate the app priority table, however drivers don't have a good moment in time to do this. The dsa_switch_ops :: setup() method gets called before the net_devices are created (dsa_slave_create), and so is dsa_switch_ops :: port_setup(). What remains is dsa_switch_ops :: port_enable(), but this gets called upon each ndo_open. If we add app table entries on every open, we'd need to remove them on close, to avoid duplicate entry errors. But if we delete app priority entries on close, what we delete may not be the initial, driver pre-populated entries, but rather user-added entries. So it is clear that letting drivers choose the timing of the dcb_ieee_setapp() call is inappropriate. The alternative which was chosen is to introduce hardware-specific ops in dsa_switch_ops, and effectively hide dcbnl details from drivers as well. For pre-populating the application table, dsa_slave_dcbnl_init() will call ds->ops->port_get_default_prio() which is supposed to read from hardware. If the operation succeeds, DSA creates a default-prio app table entry. The method is called as soon as the slave_dev is registered, but before we release the rtnl_mutex. This is done such that user space sees the app table entries as soon as it sees the interface being registered. The fact that we populate slave_dev->dcbnl_ops with a non-NULL pointer changes behavior in dcb_doit() from net/dcb/dcbnl.c, which used to return -EOPNOTSUPP for any dcbnl operation where netdev->dcbnl_ops is NULL. Because there are still dcbnl-unaware DSA drivers even if they have dcbnl_ops populated, the way to restore the behavior is to make all dcbnl_ops return -EOPNOTSUPP on absence of the hardware-specific dsa_switch_ops method. The dcbnl framework absurdly allows there to be more than one app table entry for the same selector and protocol (in other words, more than one port-based default priority). In the iproute2 dcb program, there is a "replace" syntactical sugar command which performs an "add" and a "del" to hide this away. But we choose the largest configured priority when we call ds->ops->port_set_default_prio(), using __fls(). When there is no default-prio app table entry left, the port-default priority is restored to 0. Link: https://patchwork.kernel.org/project/netdevbpf/patch/20210113154139.1803705-2-olteanv@gmail.com/ Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-11 21:15:18 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: report and change port default priority using dcbnl The port-based default QoS class is assigned to packets that lack a VLAN PCP (or the port is configured to not trust the VLAN PCP), an IP DSCP (or the port is configured to not trust IP DSCP), and packets on which no tc-skbedit action has matched. Similar to other drivers, this can be exposed to user space using the DCB Application Priority Table. IEEE 802.1Q-2018 specifies in Table D-8 - Sel field values that when the Selector is 1, the Protocol ID value of 0 denotes the "Default application priority. For use when application priority is not otherwise specified." The way in which the dcbnl integration in DSA has been designed has to do with its requirements. Andrew Lunn explains that SOHO switches are expected to come with some sort of pre-configured QoS profile, and that it is desirable for this to come pre-loaded into the DSA slave interfaces' DCB application priority table. In the dcbnl design, this is possible because calls to dcb_ieee_setapp() can be initiated by anyone including being self-initiated by this device driver. However, what makes this challenging to implement in DSA is that the DSA core manages the net_devices (effectively hiding them from drivers), while drivers manage the hardware. The DSA core has no knowledge of what individual drivers' QoS policies are. DSA could export to drivers a wrapper over dcb_ieee_setapp() and these could call that function to pre-populate the app priority table, however drivers don't have a good moment in time to do this. The dsa_switch_ops :: setup() method gets called before the net_devices are created (dsa_slave_create), and so is dsa_switch_ops :: port_setup(). What remains is dsa_switch_ops :: port_enable(), but this gets called upon each ndo_open. If we add app table entries on every open, we'd need to remove them on close, to avoid duplicate entry errors. But if we delete app priority entries on close, what we delete may not be the initial, driver pre-populated entries, but rather user-added entries. So it is clear that letting drivers choose the timing of the dcb_ieee_setapp() call is inappropriate. The alternative which was chosen is to introduce hardware-specific ops in dsa_switch_ops, and effectively hide dcbnl details from drivers as well. For pre-populating the application table, dsa_slave_dcbnl_init() will call ds->ops->port_get_default_prio() which is supposed to read from hardware. If the operation succeeds, DSA creates a default-prio app table entry. The method is called as soon as the slave_dev is registered, but before we release the rtnl_mutex. This is done such that user space sees the app table entries as soon as it sees the interface being registered. The fact that we populate slave_dev->dcbnl_ops with a non-NULL pointer changes behavior in dcb_doit() from net/dcb/dcbnl.c, which used to return -EOPNOTSUPP for any dcbnl operation where netdev->dcbnl_ops is NULL. Because there are still dcbnl-unaware DSA drivers even if they have dcbnl_ops populated, the way to restore the behavior is to make all dcbnl_ops return -EOPNOTSUPP on absence of the hardware-specific dsa_switch_ops method. The dcbnl framework absurdly allows there to be more than one app table entry for the same selector and protocol (in other words, more than one port-based default priority). In the iproute2 dcb program, there is a "replace" syntactical sugar command which performs an "add" and a "del" to hide this away. But we choose the largest configured priority when we call ds->ops->port_set_default_prio(), using __fls(). When there is no default-prio app table entry left, the port-default priority is restored to 0. Link: https://patchwork.kernel.org/project/netdevbpf/patch/20210113154139.1803705-2-olteanv@gmail.com/ Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-11 21:15:18 +00:00
struct dsa_switch *ds = dp->ds;
unsigned long mask, new_prio;
int err, port = dp->index;
if (!ds->ops->port_set_default_prio)
return -EOPNOTSUPP;
err = dcb_ieee_delapp(dev, app);
if (err)
return err;
mask = dcb_ieee_getapp_mask(dev, app);
new_prio = mask ? __fls(mask) : 0;
err = ds->ops->port_set_default_prio(ds, port, new_prio);
if (err) {
dcb_ieee_setapp(dev, app);
return err;
}
return 0;
}
net: dsa: report and change port dscp priority using dcbnl Similar to the port-based default priority, IEEE 802.1Q-2018 allows the Application Priority Table to define QoS classes (0 to 7) per IP DSCP value (0 to 63). In the absence of an app table entry for a packet with DSCP value X, QoS classification for that packet falls back to other methods (VLAN PCP or port-based default). The presence of an app table for DSCP value X with priority Y makes the hardware classify the packet to QoS class Y. As opposed to the default-prio where DSA exposes only a "set" in dsa_switch_ops (because the port-based default is the fallback, it always exists, either implicitly or explicitly), for DSCP priorities we expose an "add" and a "del". The addition of a DSCP entry means trusting that DSCP priority, the deletion means ignoring it. Drivers that already trust (at least some) DSCP values can describe their configuration in dsa_switch_ops :: port_get_dscp_prio(), which is called for each DSCP value from 0 to 63. Again, there can be more than one dcbnl app table entry for the same DSCP value, DSA chooses the one with the largest configured priority. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-11 21:15:19 +00:00
static int __maybe_unused
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dsa_user_dcbnl_del_dscp_prio(struct net_device *dev, struct dcb_app *app)
net: dsa: report and change port dscp priority using dcbnl Similar to the port-based default priority, IEEE 802.1Q-2018 allows the Application Priority Table to define QoS classes (0 to 7) per IP DSCP value (0 to 63). In the absence of an app table entry for a packet with DSCP value X, QoS classification for that packet falls back to other methods (VLAN PCP or port-based default). The presence of an app table for DSCP value X with priority Y makes the hardware classify the packet to QoS class Y. As opposed to the default-prio where DSA exposes only a "set" in dsa_switch_ops (because the port-based default is the fallback, it always exists, either implicitly or explicitly), for DSCP priorities we expose an "add" and a "del". The addition of a DSCP entry means trusting that DSCP priority, the deletion means ignoring it. Drivers that already trust (at least some) DSCP values can describe their configuration in dsa_switch_ops :: port_get_dscp_prio(), which is called for each DSCP value from 0 to 63. Again, there can be more than one dcbnl app table entry for the same DSCP value, DSA chooses the one with the largest configured priority. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-11 21:15:19 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: report and change port dscp priority using dcbnl Similar to the port-based default priority, IEEE 802.1Q-2018 allows the Application Priority Table to define QoS classes (0 to 7) per IP DSCP value (0 to 63). In the absence of an app table entry for a packet with DSCP value X, QoS classification for that packet falls back to other methods (VLAN PCP or port-based default). The presence of an app table for DSCP value X with priority Y makes the hardware classify the packet to QoS class Y. As opposed to the default-prio where DSA exposes only a "set" in dsa_switch_ops (because the port-based default is the fallback, it always exists, either implicitly or explicitly), for DSCP priorities we expose an "add" and a "del". The addition of a DSCP entry means trusting that DSCP priority, the deletion means ignoring it. Drivers that already trust (at least some) DSCP values can describe their configuration in dsa_switch_ops :: port_get_dscp_prio(), which is called for each DSCP value from 0 to 63. Again, there can be more than one dcbnl app table entry for the same DSCP value, DSA chooses the one with the largest configured priority. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-11 21:15:19 +00:00
struct dsa_switch *ds = dp->ds;
int err, port = dp->index;
u8 dscp = app->protocol;
if (!ds->ops->port_del_dscp_prio)
return -EOPNOTSUPP;
err = dcb_ieee_delapp(dev, app);
if (err)
return err;
err = ds->ops->port_del_dscp_prio(ds, port, dscp, app->priority);
if (err) {
dcb_ieee_setapp(dev, app);
return err;
}
net: dsa: add support switches global DSCP priority mapping Some switches like Microchip KSZ variants do not support per port DSCP priority configuration. Instead there is a global DSCP mapping table. To handle it, we will accept set/del request to any of user ports to make global configuration and update dcb app entries for all other ports. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-05-03 13:13:49 +00:00
if (!ds->dscp_prio_mapping_is_global)
return 0;
err = dsa_user_dcbnl_ieee_global_dscp_setdel(dev, app, true);
if (err) {
if (ds->ops->port_add_dscp_prio)
ds->ops->port_add_dscp_prio(ds, port, dscp,
app->priority);
dcb_ieee_setapp(dev, app);
return err;
}
net: dsa: report and change port dscp priority using dcbnl Similar to the port-based default priority, IEEE 802.1Q-2018 allows the Application Priority Table to define QoS classes (0 to 7) per IP DSCP value (0 to 63). In the absence of an app table entry for a packet with DSCP value X, QoS classification for that packet falls back to other methods (VLAN PCP or port-based default). The presence of an app table for DSCP value X with priority Y makes the hardware classify the packet to QoS class Y. As opposed to the default-prio where DSA exposes only a "set" in dsa_switch_ops (because the port-based default is the fallback, it always exists, either implicitly or explicitly), for DSCP priorities we expose an "add" and a "del". The addition of a DSCP entry means trusting that DSCP priority, the deletion means ignoring it. Drivers that already trust (at least some) DSCP values can describe their configuration in dsa_switch_ops :: port_get_dscp_prio(), which is called for each DSCP value from 0 to 63. Again, there can be more than one dcbnl app table entry for the same DSCP value, DSA chooses the one with the largest configured priority. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-11 21:15:19 +00:00
return 0;
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int __maybe_unused dsa_user_dcbnl_ieee_delapp(struct net_device *dev,
struct dcb_app *app)
net: dsa: report and change port default priority using dcbnl The port-based default QoS class is assigned to packets that lack a VLAN PCP (or the port is configured to not trust the VLAN PCP), an IP DSCP (or the port is configured to not trust IP DSCP), and packets on which no tc-skbedit action has matched. Similar to other drivers, this can be exposed to user space using the DCB Application Priority Table. IEEE 802.1Q-2018 specifies in Table D-8 - Sel field values that when the Selector is 1, the Protocol ID value of 0 denotes the "Default application priority. For use when application priority is not otherwise specified." The way in which the dcbnl integration in DSA has been designed has to do with its requirements. Andrew Lunn explains that SOHO switches are expected to come with some sort of pre-configured QoS profile, and that it is desirable for this to come pre-loaded into the DSA slave interfaces' DCB application priority table. In the dcbnl design, this is possible because calls to dcb_ieee_setapp() can be initiated by anyone including being self-initiated by this device driver. However, what makes this challenging to implement in DSA is that the DSA core manages the net_devices (effectively hiding them from drivers), while drivers manage the hardware. The DSA core has no knowledge of what individual drivers' QoS policies are. DSA could export to drivers a wrapper over dcb_ieee_setapp() and these could call that function to pre-populate the app priority table, however drivers don't have a good moment in time to do this. The dsa_switch_ops :: setup() method gets called before the net_devices are created (dsa_slave_create), and so is dsa_switch_ops :: port_setup(). What remains is dsa_switch_ops :: port_enable(), but this gets called upon each ndo_open. If we add app table entries on every open, we'd need to remove them on close, to avoid duplicate entry errors. But if we delete app priority entries on close, what we delete may not be the initial, driver pre-populated entries, but rather user-added entries. So it is clear that letting drivers choose the timing of the dcb_ieee_setapp() call is inappropriate. The alternative which was chosen is to introduce hardware-specific ops in dsa_switch_ops, and effectively hide dcbnl details from drivers as well. For pre-populating the application table, dsa_slave_dcbnl_init() will call ds->ops->port_get_default_prio() which is supposed to read from hardware. If the operation succeeds, DSA creates a default-prio app table entry. The method is called as soon as the slave_dev is registered, but before we release the rtnl_mutex. This is done such that user space sees the app table entries as soon as it sees the interface being registered. The fact that we populate slave_dev->dcbnl_ops with a non-NULL pointer changes behavior in dcb_doit() from net/dcb/dcbnl.c, which used to return -EOPNOTSUPP for any dcbnl operation where netdev->dcbnl_ops is NULL. Because there are still dcbnl-unaware DSA drivers even if they have dcbnl_ops populated, the way to restore the behavior is to make all dcbnl_ops return -EOPNOTSUPP on absence of the hardware-specific dsa_switch_ops method. The dcbnl framework absurdly allows there to be more than one app table entry for the same selector and protocol (in other words, more than one port-based default priority). In the iproute2 dcb program, there is a "replace" syntactical sugar command which performs an "add" and a "del" to hide this away. But we choose the largest configured priority when we call ds->ops->port_set_default_prio(), using __fls(). When there is no default-prio app table entry left, the port-default priority is restored to 0. Link: https://patchwork.kernel.org/project/netdevbpf/patch/20210113154139.1803705-2-olteanv@gmail.com/ Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-11 21:15:18 +00:00
{
switch (app->selector) {
case IEEE_8021QAZ_APP_SEL_ETHERTYPE:
switch (app->protocol) {
case 0:
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
return dsa_user_dcbnl_del_default_prio(dev, app);
net: dsa: report and change port default priority using dcbnl The port-based default QoS class is assigned to packets that lack a VLAN PCP (or the port is configured to not trust the VLAN PCP), an IP DSCP (or the port is configured to not trust IP DSCP), and packets on which no tc-skbedit action has matched. Similar to other drivers, this can be exposed to user space using the DCB Application Priority Table. IEEE 802.1Q-2018 specifies in Table D-8 - Sel field values that when the Selector is 1, the Protocol ID value of 0 denotes the "Default application priority. For use when application priority is not otherwise specified." The way in which the dcbnl integration in DSA has been designed has to do with its requirements. Andrew Lunn explains that SOHO switches are expected to come with some sort of pre-configured QoS profile, and that it is desirable for this to come pre-loaded into the DSA slave interfaces' DCB application priority table. In the dcbnl design, this is possible because calls to dcb_ieee_setapp() can be initiated by anyone including being self-initiated by this device driver. However, what makes this challenging to implement in DSA is that the DSA core manages the net_devices (effectively hiding them from drivers), while drivers manage the hardware. The DSA core has no knowledge of what individual drivers' QoS policies are. DSA could export to drivers a wrapper over dcb_ieee_setapp() and these could call that function to pre-populate the app priority table, however drivers don't have a good moment in time to do this. The dsa_switch_ops :: setup() method gets called before the net_devices are created (dsa_slave_create), and so is dsa_switch_ops :: port_setup(). What remains is dsa_switch_ops :: port_enable(), but this gets called upon each ndo_open. If we add app table entries on every open, we'd need to remove them on close, to avoid duplicate entry errors. But if we delete app priority entries on close, what we delete may not be the initial, driver pre-populated entries, but rather user-added entries. So it is clear that letting drivers choose the timing of the dcb_ieee_setapp() call is inappropriate. The alternative which was chosen is to introduce hardware-specific ops in dsa_switch_ops, and effectively hide dcbnl details from drivers as well. For pre-populating the application table, dsa_slave_dcbnl_init() will call ds->ops->port_get_default_prio() which is supposed to read from hardware. If the operation succeeds, DSA creates a default-prio app table entry. The method is called as soon as the slave_dev is registered, but before we release the rtnl_mutex. This is done such that user space sees the app table entries as soon as it sees the interface being registered. The fact that we populate slave_dev->dcbnl_ops with a non-NULL pointer changes behavior in dcb_doit() from net/dcb/dcbnl.c, which used to return -EOPNOTSUPP for any dcbnl operation where netdev->dcbnl_ops is NULL. Because there are still dcbnl-unaware DSA drivers even if they have dcbnl_ops populated, the way to restore the behavior is to make all dcbnl_ops return -EOPNOTSUPP on absence of the hardware-specific dsa_switch_ops method. The dcbnl framework absurdly allows there to be more than one app table entry for the same selector and protocol (in other words, more than one port-based default priority). In the iproute2 dcb program, there is a "replace" syntactical sugar command which performs an "add" and a "del" to hide this away. But we choose the largest configured priority when we call ds->ops->port_set_default_prio(), using __fls(). When there is no default-prio app table entry left, the port-default priority is restored to 0. Link: https://patchwork.kernel.org/project/netdevbpf/patch/20210113154139.1803705-2-olteanv@gmail.com/ Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-11 21:15:18 +00:00
default:
return -EOPNOTSUPP;
}
break;
net: dsa: report and change port dscp priority using dcbnl Similar to the port-based default priority, IEEE 802.1Q-2018 allows the Application Priority Table to define QoS classes (0 to 7) per IP DSCP value (0 to 63). In the absence of an app table entry for a packet with DSCP value X, QoS classification for that packet falls back to other methods (VLAN PCP or port-based default). The presence of an app table for DSCP value X with priority Y makes the hardware classify the packet to QoS class Y. As opposed to the default-prio where DSA exposes only a "set" in dsa_switch_ops (because the port-based default is the fallback, it always exists, either implicitly or explicitly), for DSCP priorities we expose an "add" and a "del". The addition of a DSCP entry means trusting that DSCP priority, the deletion means ignoring it. Drivers that already trust (at least some) DSCP values can describe their configuration in dsa_switch_ops :: port_get_dscp_prio(), which is called for each DSCP value from 0 to 63. Again, there can be more than one dcbnl app table entry for the same DSCP value, DSA chooses the one with the largest configured priority. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-11 21:15:19 +00:00
case IEEE_8021QAZ_APP_SEL_DSCP:
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
return dsa_user_dcbnl_del_dscp_prio(dev, app);
net: dsa: report and change port default priority using dcbnl The port-based default QoS class is assigned to packets that lack a VLAN PCP (or the port is configured to not trust the VLAN PCP), an IP DSCP (or the port is configured to not trust IP DSCP), and packets on which no tc-skbedit action has matched. Similar to other drivers, this can be exposed to user space using the DCB Application Priority Table. IEEE 802.1Q-2018 specifies in Table D-8 - Sel field values that when the Selector is 1, the Protocol ID value of 0 denotes the "Default application priority. For use when application priority is not otherwise specified." The way in which the dcbnl integration in DSA has been designed has to do with its requirements. Andrew Lunn explains that SOHO switches are expected to come with some sort of pre-configured QoS profile, and that it is desirable for this to come pre-loaded into the DSA slave interfaces' DCB application priority table. In the dcbnl design, this is possible because calls to dcb_ieee_setapp() can be initiated by anyone including being self-initiated by this device driver. However, what makes this challenging to implement in DSA is that the DSA core manages the net_devices (effectively hiding them from drivers), while drivers manage the hardware. The DSA core has no knowledge of what individual drivers' QoS policies are. DSA could export to drivers a wrapper over dcb_ieee_setapp() and these could call that function to pre-populate the app priority table, however drivers don't have a good moment in time to do this. The dsa_switch_ops :: setup() method gets called before the net_devices are created (dsa_slave_create), and so is dsa_switch_ops :: port_setup(). What remains is dsa_switch_ops :: port_enable(), but this gets called upon each ndo_open. If we add app table entries on every open, we'd need to remove them on close, to avoid duplicate entry errors. But if we delete app priority entries on close, what we delete may not be the initial, driver pre-populated entries, but rather user-added entries. So it is clear that letting drivers choose the timing of the dcb_ieee_setapp() call is inappropriate. The alternative which was chosen is to introduce hardware-specific ops in dsa_switch_ops, and effectively hide dcbnl details from drivers as well. For pre-populating the application table, dsa_slave_dcbnl_init() will call ds->ops->port_get_default_prio() which is supposed to read from hardware. If the operation succeeds, DSA creates a default-prio app table entry. The method is called as soon as the slave_dev is registered, but before we release the rtnl_mutex. This is done such that user space sees the app table entries as soon as it sees the interface being registered. The fact that we populate slave_dev->dcbnl_ops with a non-NULL pointer changes behavior in dcb_doit() from net/dcb/dcbnl.c, which used to return -EOPNOTSUPP for any dcbnl operation where netdev->dcbnl_ops is NULL. Because there are still dcbnl-unaware DSA drivers even if they have dcbnl_ops populated, the way to restore the behavior is to make all dcbnl_ops return -EOPNOTSUPP on absence of the hardware-specific dsa_switch_ops method. The dcbnl framework absurdly allows there to be more than one app table entry for the same selector and protocol (in other words, more than one port-based default priority). In the iproute2 dcb program, there is a "replace" syntactical sugar command which performs an "add" and a "del" to hide this away. But we choose the largest configured priority when we call ds->ops->port_set_default_prio(), using __fls(). When there is no default-prio app table entry left, the port-default priority is restored to 0. Link: https://patchwork.kernel.org/project/netdevbpf/patch/20210113154139.1803705-2-olteanv@gmail.com/ Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-11 21:15:18 +00:00
default:
return -EOPNOTSUPP;
}
}
/* Pre-populate the DCB application priority table with the priorities
* configured during switch setup, which we read from hardware here.
*/
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_dcbnl_init(struct net_device *dev)
net: dsa: report and change port default priority using dcbnl The port-based default QoS class is assigned to packets that lack a VLAN PCP (or the port is configured to not trust the VLAN PCP), an IP DSCP (or the port is configured to not trust IP DSCP), and packets on which no tc-skbedit action has matched. Similar to other drivers, this can be exposed to user space using the DCB Application Priority Table. IEEE 802.1Q-2018 specifies in Table D-8 - Sel field values that when the Selector is 1, the Protocol ID value of 0 denotes the "Default application priority. For use when application priority is not otherwise specified." The way in which the dcbnl integration in DSA has been designed has to do with its requirements. Andrew Lunn explains that SOHO switches are expected to come with some sort of pre-configured QoS profile, and that it is desirable for this to come pre-loaded into the DSA slave interfaces' DCB application priority table. In the dcbnl design, this is possible because calls to dcb_ieee_setapp() can be initiated by anyone including being self-initiated by this device driver. However, what makes this challenging to implement in DSA is that the DSA core manages the net_devices (effectively hiding them from drivers), while drivers manage the hardware. The DSA core has no knowledge of what individual drivers' QoS policies are. DSA could export to drivers a wrapper over dcb_ieee_setapp() and these could call that function to pre-populate the app priority table, however drivers don't have a good moment in time to do this. The dsa_switch_ops :: setup() method gets called before the net_devices are created (dsa_slave_create), and so is dsa_switch_ops :: port_setup(). What remains is dsa_switch_ops :: port_enable(), but this gets called upon each ndo_open. If we add app table entries on every open, we'd need to remove them on close, to avoid duplicate entry errors. But if we delete app priority entries on close, what we delete may not be the initial, driver pre-populated entries, but rather user-added entries. So it is clear that letting drivers choose the timing of the dcb_ieee_setapp() call is inappropriate. The alternative which was chosen is to introduce hardware-specific ops in dsa_switch_ops, and effectively hide dcbnl details from drivers as well. For pre-populating the application table, dsa_slave_dcbnl_init() will call ds->ops->port_get_default_prio() which is supposed to read from hardware. If the operation succeeds, DSA creates a default-prio app table entry. The method is called as soon as the slave_dev is registered, but before we release the rtnl_mutex. This is done such that user space sees the app table entries as soon as it sees the interface being registered. The fact that we populate slave_dev->dcbnl_ops with a non-NULL pointer changes behavior in dcb_doit() from net/dcb/dcbnl.c, which used to return -EOPNOTSUPP for any dcbnl operation where netdev->dcbnl_ops is NULL. Because there are still dcbnl-unaware DSA drivers even if they have dcbnl_ops populated, the way to restore the behavior is to make all dcbnl_ops return -EOPNOTSUPP on absence of the hardware-specific dsa_switch_ops method. The dcbnl framework absurdly allows there to be more than one app table entry for the same selector and protocol (in other words, more than one port-based default priority). In the iproute2 dcb program, there is a "replace" syntactical sugar command which performs an "add" and a "del" to hide this away. But we choose the largest configured priority when we call ds->ops->port_set_default_prio(), using __fls(). When there is no default-prio app table entry left, the port-default priority is restored to 0. Link: https://patchwork.kernel.org/project/netdevbpf/patch/20210113154139.1803705-2-olteanv@gmail.com/ Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-11 21:15:18 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: report and change port default priority using dcbnl The port-based default QoS class is assigned to packets that lack a VLAN PCP (or the port is configured to not trust the VLAN PCP), an IP DSCP (or the port is configured to not trust IP DSCP), and packets on which no tc-skbedit action has matched. Similar to other drivers, this can be exposed to user space using the DCB Application Priority Table. IEEE 802.1Q-2018 specifies in Table D-8 - Sel field values that when the Selector is 1, the Protocol ID value of 0 denotes the "Default application priority. For use when application priority is not otherwise specified." The way in which the dcbnl integration in DSA has been designed has to do with its requirements. Andrew Lunn explains that SOHO switches are expected to come with some sort of pre-configured QoS profile, and that it is desirable for this to come pre-loaded into the DSA slave interfaces' DCB application priority table. In the dcbnl design, this is possible because calls to dcb_ieee_setapp() can be initiated by anyone including being self-initiated by this device driver. However, what makes this challenging to implement in DSA is that the DSA core manages the net_devices (effectively hiding them from drivers), while drivers manage the hardware. The DSA core has no knowledge of what individual drivers' QoS policies are. DSA could export to drivers a wrapper over dcb_ieee_setapp() and these could call that function to pre-populate the app priority table, however drivers don't have a good moment in time to do this. The dsa_switch_ops :: setup() method gets called before the net_devices are created (dsa_slave_create), and so is dsa_switch_ops :: port_setup(). What remains is dsa_switch_ops :: port_enable(), but this gets called upon each ndo_open. If we add app table entries on every open, we'd need to remove them on close, to avoid duplicate entry errors. But if we delete app priority entries on close, what we delete may not be the initial, driver pre-populated entries, but rather user-added entries. So it is clear that letting drivers choose the timing of the dcb_ieee_setapp() call is inappropriate. The alternative which was chosen is to introduce hardware-specific ops in dsa_switch_ops, and effectively hide dcbnl details from drivers as well. For pre-populating the application table, dsa_slave_dcbnl_init() will call ds->ops->port_get_default_prio() which is supposed to read from hardware. If the operation succeeds, DSA creates a default-prio app table entry. The method is called as soon as the slave_dev is registered, but before we release the rtnl_mutex. This is done such that user space sees the app table entries as soon as it sees the interface being registered. The fact that we populate slave_dev->dcbnl_ops with a non-NULL pointer changes behavior in dcb_doit() from net/dcb/dcbnl.c, which used to return -EOPNOTSUPP for any dcbnl operation where netdev->dcbnl_ops is NULL. Because there are still dcbnl-unaware DSA drivers even if they have dcbnl_ops populated, the way to restore the behavior is to make all dcbnl_ops return -EOPNOTSUPP on absence of the hardware-specific dsa_switch_ops method. The dcbnl framework absurdly allows there to be more than one app table entry for the same selector and protocol (in other words, more than one port-based default priority). In the iproute2 dcb program, there is a "replace" syntactical sugar command which performs an "add" and a "del" to hide this away. But we choose the largest configured priority when we call ds->ops->port_set_default_prio(), using __fls(). When there is no default-prio app table entry left, the port-default priority is restored to 0. Link: https://patchwork.kernel.org/project/netdevbpf/patch/20210113154139.1803705-2-olteanv@gmail.com/ Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-11 21:15:18 +00:00
struct dsa_switch *ds = dp->ds;
int port = dp->index;
int err;
if (ds->ops->port_get_default_prio) {
int prio = ds->ops->port_get_default_prio(ds, port);
struct dcb_app app = {
.selector = IEEE_8021QAZ_APP_SEL_ETHERTYPE,
.protocol = 0,
.priority = prio,
};
if (prio < 0)
return prio;
err = dcb_ieee_setapp(dev, &app);
if (err)
return err;
}
net: dsa: report and change port dscp priority using dcbnl Similar to the port-based default priority, IEEE 802.1Q-2018 allows the Application Priority Table to define QoS classes (0 to 7) per IP DSCP value (0 to 63). In the absence of an app table entry for a packet with DSCP value X, QoS classification for that packet falls back to other methods (VLAN PCP or port-based default). The presence of an app table for DSCP value X with priority Y makes the hardware classify the packet to QoS class Y. As opposed to the default-prio where DSA exposes only a "set" in dsa_switch_ops (because the port-based default is the fallback, it always exists, either implicitly or explicitly), for DSCP priorities we expose an "add" and a "del". The addition of a DSCP entry means trusting that DSCP priority, the deletion means ignoring it. Drivers that already trust (at least some) DSCP values can describe their configuration in dsa_switch_ops :: port_get_dscp_prio(), which is called for each DSCP value from 0 to 63. Again, there can be more than one dcbnl app table entry for the same DSCP value, DSA chooses the one with the largest configured priority. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-11 21:15:19 +00:00
if (ds->ops->port_get_dscp_prio) {
int protocol;
for (protocol = 0; protocol < 64; protocol++) {
struct dcb_app app = {
.selector = IEEE_8021QAZ_APP_SEL_DSCP,
.protocol = protocol,
};
int prio;
prio = ds->ops->port_get_dscp_prio(ds, port, protocol);
if (prio == -EOPNOTSUPP)
continue;
if (prio < 0)
return prio;
app.priority = prio;
err = dcb_ieee_setapp(dev, &app);
if (err)
return err;
}
}
net: dsa: report and change port default priority using dcbnl The port-based default QoS class is assigned to packets that lack a VLAN PCP (or the port is configured to not trust the VLAN PCP), an IP DSCP (or the port is configured to not trust IP DSCP), and packets on which no tc-skbedit action has matched. Similar to other drivers, this can be exposed to user space using the DCB Application Priority Table. IEEE 802.1Q-2018 specifies in Table D-8 - Sel field values that when the Selector is 1, the Protocol ID value of 0 denotes the "Default application priority. For use when application priority is not otherwise specified." The way in which the dcbnl integration in DSA has been designed has to do with its requirements. Andrew Lunn explains that SOHO switches are expected to come with some sort of pre-configured QoS profile, and that it is desirable for this to come pre-loaded into the DSA slave interfaces' DCB application priority table. In the dcbnl design, this is possible because calls to dcb_ieee_setapp() can be initiated by anyone including being self-initiated by this device driver. However, what makes this challenging to implement in DSA is that the DSA core manages the net_devices (effectively hiding them from drivers), while drivers manage the hardware. The DSA core has no knowledge of what individual drivers' QoS policies are. DSA could export to drivers a wrapper over dcb_ieee_setapp() and these could call that function to pre-populate the app priority table, however drivers don't have a good moment in time to do this. The dsa_switch_ops :: setup() method gets called before the net_devices are created (dsa_slave_create), and so is dsa_switch_ops :: port_setup(). What remains is dsa_switch_ops :: port_enable(), but this gets called upon each ndo_open. If we add app table entries on every open, we'd need to remove them on close, to avoid duplicate entry errors. But if we delete app priority entries on close, what we delete may not be the initial, driver pre-populated entries, but rather user-added entries. So it is clear that letting drivers choose the timing of the dcb_ieee_setapp() call is inappropriate. The alternative which was chosen is to introduce hardware-specific ops in dsa_switch_ops, and effectively hide dcbnl details from drivers as well. For pre-populating the application table, dsa_slave_dcbnl_init() will call ds->ops->port_get_default_prio() which is supposed to read from hardware. If the operation succeeds, DSA creates a default-prio app table entry. The method is called as soon as the slave_dev is registered, but before we release the rtnl_mutex. This is done such that user space sees the app table entries as soon as it sees the interface being registered. The fact that we populate slave_dev->dcbnl_ops with a non-NULL pointer changes behavior in dcb_doit() from net/dcb/dcbnl.c, which used to return -EOPNOTSUPP for any dcbnl operation where netdev->dcbnl_ops is NULL. Because there are still dcbnl-unaware DSA drivers even if they have dcbnl_ops populated, the way to restore the behavior is to make all dcbnl_ops return -EOPNOTSUPP on absence of the hardware-specific dsa_switch_ops method. The dcbnl framework absurdly allows there to be more than one app table entry for the same selector and protocol (in other words, more than one port-based default priority). In the iproute2 dcb program, there is a "replace" syntactical sugar command which performs an "add" and a "del" to hide this away. But we choose the largest configured priority when we call ds->ops->port_set_default_prio(), using __fls(). When there is no default-prio app table entry left, the port-default priority is restored to 0. Link: https://patchwork.kernel.org/project/netdevbpf/patch/20210113154139.1803705-2-olteanv@gmail.com/ Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-11 21:15:18 +00:00
return 0;
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static const struct ethtool_ops dsa_user_ethtool_ops = {
.get_drvinfo = dsa_user_get_drvinfo,
.get_regs_len = dsa_user_get_regs_len,
.get_regs = dsa_user_get_regs,
.nway_reset = dsa_user_nway_reset,
net: dsa: Eliminate dsa_slave_get_link() Since we use PHYLIB to manage the per-port link indication, this will also be reflected correctly in the network device's carrier state, so we can use ethtool_op_get_link() instead. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 20:17:34 +00:00
.get_link = ethtool_op_get_link,
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
.get_eeprom_len = dsa_user_get_eeprom_len,
.get_eeprom = dsa_user_get_eeprom,
.set_eeprom = dsa_user_set_eeprom,
.get_strings = dsa_user_get_strings,
.get_ethtool_stats = dsa_user_get_ethtool_stats,
.get_sset_count = dsa_user_get_sset_count,
.get_eth_phy_stats = dsa_user_get_eth_phy_stats,
.get_eth_mac_stats = dsa_user_get_eth_mac_stats,
.get_eth_ctrl_stats = dsa_user_get_eth_ctrl_stats,
.get_rmon_stats = dsa_user_get_rmon_stats,
.set_wol = dsa_user_set_wol,
.get_wol = dsa_user_get_wol,
.set_eee = dsa_user_set_eee,
.get_eee = dsa_user_get_eee,
.get_link_ksettings = dsa_user_get_link_ksettings,
.set_link_ksettings = dsa_user_set_link_ksettings,
.get_pause_stats = dsa_user_get_pause_stats,
.get_pauseparam = dsa_user_get_pauseparam,
.set_pauseparam = dsa_user_set_pauseparam,
.get_rxnfc = dsa_user_get_rxnfc,
.set_rxnfc = dsa_user_set_rxnfc,
.get_ts_info = dsa_user_get_ts_info,
.self_test = dsa_user_net_selftest,
.get_mm = dsa_user_get_mm,
.set_mm = dsa_user_set_mm,
.get_mm_stats = dsa_user_get_mm_stats,
net: Distributed Switch Architecture protocol support Distributed Switch Architecture is a protocol for managing hardware switch chips. It consists of a set of MII management registers and commands to configure the switch, and an ethernet header format to signal which of the ports of the switch a packet was received from or is intended to be sent to. The switches that this driver supports are typically embedded in access points and routers, and a typical setup with a DSA switch looks something like this: +-----------+ +-----------+ | | RGMII | | | +-------+ +------ 1000baseT MDI ("WAN") | | | 6-port +------ 1000baseT MDI ("LAN1") | CPU | | ethernet +------ 1000baseT MDI ("LAN2") | |MIImgmt| switch +------ 1000baseT MDI ("LAN3") | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4") | | | | +-----------+ +-----------+ The switch driver presents each port on the switch as a separate network interface to Linux, polls the switch to maintain software link state of those ports, forwards MII management interface accesses to those network interfaces (e.g. as done by ethtool) to the switch, and exposes the switch's hardware statistics counters via the appropriate Linux kernel interfaces. This initial patch supports the MII management interface register layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and supports the "Ethertype DSA" packet tagging format. (There is no officially registered ethertype for the Ethertype DSA packet format, so we just grab a random one. The ethertype to use is programmed into the switch, and the switch driver uses the value of ETH_P_EDSA for this, so this define can be changed at any time in the future if the one we chose is allocated to another protocol or if Ethertype DSA gets its own officially registered ethertype, and everything will continue to work.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 13:44:02 +00:00
};
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static const struct dcbnl_rtnl_ops __maybe_unused dsa_user_dcbnl_ops = {
.ieee_setapp = dsa_user_dcbnl_ieee_setapp,
.ieee_delapp = dsa_user_dcbnl_ieee_delapp,
net: dsa: add support for DCB get/set apptrust configuration Add DCB support to get/set trust configuration for different packet priority information sources. Some switch allow to chose different source of packet priority classification. For example on KSZ switches it is possible to configure VLAN PCP and/or DSCP sources. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-05-03 13:13:40 +00:00
.dcbnl_setapptrust = dsa_user_dcbnl_set_apptrust,
.dcbnl_getapptrust = dsa_user_dcbnl_get_apptrust,
net: dsa: report and change port default priority using dcbnl The port-based default QoS class is assigned to packets that lack a VLAN PCP (or the port is configured to not trust the VLAN PCP), an IP DSCP (or the port is configured to not trust IP DSCP), and packets on which no tc-skbedit action has matched. Similar to other drivers, this can be exposed to user space using the DCB Application Priority Table. IEEE 802.1Q-2018 specifies in Table D-8 - Sel field values that when the Selector is 1, the Protocol ID value of 0 denotes the "Default application priority. For use when application priority is not otherwise specified." The way in which the dcbnl integration in DSA has been designed has to do with its requirements. Andrew Lunn explains that SOHO switches are expected to come with some sort of pre-configured QoS profile, and that it is desirable for this to come pre-loaded into the DSA slave interfaces' DCB application priority table. In the dcbnl design, this is possible because calls to dcb_ieee_setapp() can be initiated by anyone including being self-initiated by this device driver. However, what makes this challenging to implement in DSA is that the DSA core manages the net_devices (effectively hiding them from drivers), while drivers manage the hardware. The DSA core has no knowledge of what individual drivers' QoS policies are. DSA could export to drivers a wrapper over dcb_ieee_setapp() and these could call that function to pre-populate the app priority table, however drivers don't have a good moment in time to do this. The dsa_switch_ops :: setup() method gets called before the net_devices are created (dsa_slave_create), and so is dsa_switch_ops :: port_setup(). What remains is dsa_switch_ops :: port_enable(), but this gets called upon each ndo_open. If we add app table entries on every open, we'd need to remove them on close, to avoid duplicate entry errors. But if we delete app priority entries on close, what we delete may not be the initial, driver pre-populated entries, but rather user-added entries. So it is clear that letting drivers choose the timing of the dcb_ieee_setapp() call is inappropriate. The alternative which was chosen is to introduce hardware-specific ops in dsa_switch_ops, and effectively hide dcbnl details from drivers as well. For pre-populating the application table, dsa_slave_dcbnl_init() will call ds->ops->port_get_default_prio() which is supposed to read from hardware. If the operation succeeds, DSA creates a default-prio app table entry. The method is called as soon as the slave_dev is registered, but before we release the rtnl_mutex. This is done such that user space sees the app table entries as soon as it sees the interface being registered. The fact that we populate slave_dev->dcbnl_ops with a non-NULL pointer changes behavior in dcb_doit() from net/dcb/dcbnl.c, which used to return -EOPNOTSUPP for any dcbnl operation where netdev->dcbnl_ops is NULL. Because there are still dcbnl-unaware DSA drivers even if they have dcbnl_ops populated, the way to restore the behavior is to make all dcbnl_ops return -EOPNOTSUPP on absence of the hardware-specific dsa_switch_ops method. The dcbnl framework absurdly allows there to be more than one app table entry for the same selector and protocol (in other words, more than one port-based default priority). In the iproute2 dcb program, there is a "replace" syntactical sugar command which performs an "add" and a "del" to hide this away. But we choose the largest configured priority when we call ds->ops->port_set_default_prio(), using __fls(). When there is no default-prio app table entry left, the port-default priority is restored to 0. Link: https://patchwork.kernel.org/project/netdevbpf/patch/20210113154139.1803705-2-olteanv@gmail.com/ Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-11 21:15:18 +00:00
};
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static void dsa_user_get_stats64(struct net_device *dev,
struct rtnl_link_stats64 *s)
net: dsa: add optional stats64 support Allow DSA drivers to export stats64 Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-11 10:46:57 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: add optional stats64 support Allow DSA drivers to export stats64 Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-11 10:46:57 +00:00
struct dsa_switch *ds = dp->ds;
if (ds->ops->get_stats64)
ds->ops->get_stats64(ds, dp->index, s);
else
dev_get_tstats64(dev, s);
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_fill_forward_path(struct net_device_path_ctx *ctx,
struct net_device_path *path)
net: dsa: resolve forwarding path for dsa slave ports Add .ndo_fill_forward_path for dsa slave port devices Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-24 01:30:37 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(ctx->dev);
struct net_device *conduit = dsa_port_to_conduit(dp);
net: dsa: resolve forwarding path for dsa slave ports Add .ndo_fill_forward_path for dsa slave port devices Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-24 01:30:37 +00:00
struct dsa_port *cpu_dp = dp->cpu_dp;
path->dev = ctx->dev;
path->type = DEV_PATH_DSA;
path->dsa.proto = cpu_dp->tag_ops->proto;
path->dsa.port = dp->index;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
ctx->dev = conduit;
net: dsa: resolve forwarding path for dsa slave ports Add .ndo_fill_forward_path for dsa slave port devices Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-24 01:30:37 +00:00
return 0;
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static const struct net_device_ops dsa_user_netdev_ops = {
.ndo_open = dsa_user_open,
.ndo_stop = dsa_user_close,
.ndo_start_xmit = dsa_user_xmit,
.ndo_change_rx_flags = dsa_user_change_rx_flags,
.ndo_set_rx_mode = dsa_user_set_rx_mode,
.ndo_set_mac_address = dsa_user_set_mac_address,
.ndo_fdb_dump = dsa_user_fdb_dump,
.ndo_eth_ioctl = dsa_user_ioctl,
.ndo_get_iflink = dsa_user_get_iflink,
net: dsa: Add netconsole support Add support for using DSA slave network devices with netconsole, which requires us to allocate and free custom netpoll instances and invoke the parent network device poll controller callback. In order for netconsole to work, we need to construct the DSA tag, but not queue the skb for transmission on the master network device xmit function. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-31 18:42:57 +00:00
#ifdef CONFIG_NET_POLL_CONTROLLER
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
.ndo_netpoll_setup = dsa_user_netpoll_setup,
.ndo_netpoll_cleanup = dsa_user_netpoll_cleanup,
.ndo_poll_controller = dsa_user_poll_controller,
net: dsa: Add netconsole support Add support for using DSA slave network devices with netconsole, which requires us to allocate and free custom netpoll instances and invoke the parent network device poll controller callback. In order for netconsole to work, we need to construct the DSA tag, but not queue the skb for transmission on the master network device xmit function. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-31 18:42:57 +00:00
#endif
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
.ndo_setup_tc = dsa_user_setup_tc,
.ndo_get_stats64 = dsa_user_get_stats64,
.ndo_vlan_rx_add_vid = dsa_user_vlan_rx_add_vid,
.ndo_vlan_rx_kill_vid = dsa_user_vlan_rx_kill_vid,
.ndo_change_mtu = dsa_user_change_mtu,
.ndo_fill_forward_path = dsa_user_fill_forward_path,
switchdev: use new swdev ops Move swdev wrappers over to new swdev ops (from previous ndo ops). No functional changes to the implementation. Signed-off-by: Scott Feldman <sfeldma@gmail.com> rocker: move to new swdev ops Signed-off-by: Scott Feldman <sfeldma@gmail.com> dsa: move to new swdev ops Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-16 04:07:15 +00:00
};
net: dsa: constify the struct device_type usage Since commit aed65af1cc2f ("drivers: make device_type const"), the driver core can properly handle constant struct device_type. Move the dsa_type variable to be a constant structure as well, placing it into read-only memory which can not be modified at runtime. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-17 20:13:24 +00:00
static const struct device_type dsa_type = {
net: dsa: Set a "dsa" device_type Provide a device_type information for slave network devices created by DSA, this is useful for user-space application to easily locate/search for devices of a specific kind. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24 01:19:58 +00:00
.name = "dsa",
};
net: dsa: Plug in PHYLINK support Add support for PHYLINK within the DSA subsystem in order to support more complex devices such as pluggable (SFP) and non-pluggable (SFF) modules, 10G PHYs, and traditional PHYs. Using PHYLINK allows us to drop some amount of complexity we had while probing fixed and non-fixed PHYs using Device Tree. Because PHYLINK separates the Ethernet MAC/port configuration into different stages, we let switch drivers implement those, and for now, we maintain functionality by calling dsa_slave_adjust_link() during phylink_mac_link_{up,down} which provides semantically equivalent steps. Drivers willing to take advantage of PHYLINK should implement the phylink_mac_* operations that DSA wraps. We cannot quite remove the adjust_link() callback just yet, because a number of drivers rely on that for configuring their "CPU" and "DSA" ports, this is done dsa_port_setup_phy_of() and dsa_port_fixed_link_register_of() still. Drivers that utilize fixed links for user-facing ports (e.g: bcm_sf2) will need to implement phylink_mac_ops from now on to preserve functionality, since PHYLINK *does not* create a phy_device instance for fixed links. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 20:17:36 +00:00
void dsa_port_phylink_mac_change(struct dsa_switch *ds, int port, bool up)
{
const struct dsa_port *dp = dsa_to_port(ds, port);
net: dsa: fix oops while probing Marvell DSA switches Fix an oops in dsa_port_phylink_mac_change() caused by a combination of a20f997010c4 ("net: dsa: Don't instantiate phylink for CPU/DSA ports unless needed") and the net-dsa-improve-serdes-integration series of patches 65b7a2c8e369 ("Merge branch 'net-dsa-improve-serdes-integration'"). Unable to handle kernel NULL pointer dereference at virtual address 00000124 pgd = c0004000 [00000124] *pgd=00000000 Internal error: Oops: 805 [#1] SMP ARM Modules linked in: tag_edsa spi_nor mtd xhci_plat_hcd mv88e6xxx(+) xhci_hcd armada_thermal marvell_cesa dsa_core ehci_orion libdes phy_armada38x_comphy at24 mcp3021 sfp evbug spi_orion sff mdio_i2c CPU: 1 PID: 214 Comm: irq/55-mv88e6xx Not tainted 5.6.0+ #470 Hardware name: Marvell Armada 380/385 (Device Tree) PC is at phylink_mac_change+0x10/0x88 LR is at mv88e6352_serdes_irq_status+0x74/0x94 [mv88e6xxx] Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-31 14:17:36 +00:00
if (dp->pl)
phylink_mac_change(dp->pl, up);
net: dsa: Plug in PHYLINK support Add support for PHYLINK within the DSA subsystem in order to support more complex devices such as pluggable (SFP) and non-pluggable (SFF) modules, 10G PHYs, and traditional PHYs. Using PHYLINK allows us to drop some amount of complexity we had while probing fixed and non-fixed PHYs using Device Tree. Because PHYLINK separates the Ethernet MAC/port configuration into different stages, we let switch drivers implement those, and for now, we maintain functionality by calling dsa_slave_adjust_link() during phylink_mac_link_{up,down} which provides semantically equivalent steps. Drivers willing to take advantage of PHYLINK should implement the phylink_mac_* operations that DSA wraps. We cannot quite remove the adjust_link() callback just yet, because a number of drivers rely on that for configuring their "CPU" and "DSA" ports, this is done dsa_port_setup_phy_of() and dsa_port_fixed_link_register_of() still. Drivers that utilize fixed links for user-facing ports (e.g: bcm_sf2) will need to implement phylink_mac_ops from now on to preserve functionality, since PHYLINK *does not* create a phy_device instance for fixed links. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 20:17:36 +00:00
}
EXPORT_SYMBOL_GPL(dsa_port_phylink_mac_change);
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static void dsa_user_phylink_fixed_state(struct phylink_config *config,
struct phylink_link_state *state)
net: dsa: Plug in PHYLINK support Add support for PHYLINK within the DSA subsystem in order to support more complex devices such as pluggable (SFP) and non-pluggable (SFF) modules, 10G PHYs, and traditional PHYs. Using PHYLINK allows us to drop some amount of complexity we had while probing fixed and non-fixed PHYs using Device Tree. Because PHYLINK separates the Ethernet MAC/port configuration into different stages, we let switch drivers implement those, and for now, we maintain functionality by calling dsa_slave_adjust_link() during phylink_mac_link_{up,down} which provides semantically equivalent steps. Drivers willing to take advantage of PHYLINK should implement the phylink_mac_* operations that DSA wraps. We cannot quite remove the adjust_link() callback just yet, because a number of drivers rely on that for configuring their "CPU" and "DSA" ports, this is done dsa_port_setup_phy_of() and dsa_port_fixed_link_register_of() still. Drivers that utilize fixed links for user-facing ports (e.g: bcm_sf2) will need to implement phylink_mac_ops from now on to preserve functionality, since PHYLINK *does not* create a phy_device instance for fixed links. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 20:17:36 +00:00
{
net: dsa: convert dsa_user_phylink_fixed_state() to use dsa_phylink_to_port() Convert dsa_user_phylink_fixed_state() to use the newly introduced dsa_phylink_to_port() helper. Suggested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-12 15:15:03 +00:00
struct dsa_port *dp = dsa_phylink_to_port(config);
net: dsa: Plug in PHYLINK support Add support for PHYLINK within the DSA subsystem in order to support more complex devices such as pluggable (SFP) and non-pluggable (SFF) modules, 10G PHYs, and traditional PHYs. Using PHYLINK allows us to drop some amount of complexity we had while probing fixed and non-fixed PHYs using Device Tree. Because PHYLINK separates the Ethernet MAC/port configuration into different stages, we let switch drivers implement those, and for now, we maintain functionality by calling dsa_slave_adjust_link() during phylink_mac_link_{up,down} which provides semantically equivalent steps. Drivers willing to take advantage of PHYLINK should implement the phylink_mac_* operations that DSA wraps. We cannot quite remove the adjust_link() callback just yet, because a number of drivers rely on that for configuring their "CPU" and "DSA" ports, this is done dsa_port_setup_phy_of() and dsa_port_fixed_link_register_of() still. Drivers that utilize fixed links for user-facing ports (e.g: bcm_sf2) will need to implement phylink_mac_ops from now on to preserve functionality, since PHYLINK *does not* create a phy_device instance for fixed links. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 20:17:36 +00:00
struct dsa_switch *ds = dp->ds;
/* No need to check that this operation is valid, the callback would
* not be called if it was not.
*/
ds->ops->phylink_fixed_state(ds, dp->index, state);
net: dsa: allow updating fixed PHY link information Allow switch drivers to hook a PHY link update callback to perform port-specific link work. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-28 00:04:54 +00:00
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
/* user device setup *******************************************************/
static int dsa_user_phy_connect(struct net_device *user_dev, int addr,
u32 flags)
net: dsa: move PHY setup on DSA MII bus to its own function In preparation for dealing with indirect reads and writes towards certain PHY devices, move the code which deals with binding the PHY device to the slave MII bus created by DSA to its own function: dsa_slave_phy_connect(). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-10 23:57:12 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(user_dev);
net: dsa: add slave to port helper Many portions of DSA core code require to get the dsa_port structure corresponding to a slave net_device. For this purpose, introduce a dsa_slave_to_port() helper. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 15:12:15 +00:00
struct dsa_switch *ds = dp->ds;
net: dsa: move PHY setup on DSA MII bus to its own function In preparation for dealing with indirect reads and writes towards certain PHY devices, move the code which deals with binding the PHY device to the slave MII bus created by DSA to its own function: dsa_slave_phy_connect(). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-10 23:57:12 +00:00
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
user_dev->phydev = mdiobus_get_phy(ds->user_mii_bus, addr);
if (!user_dev->phydev) {
netdev_err(user_dev, "no phy at %d\n", addr);
net: dsa: move PHY setup on DSA MII bus to its own function In preparation for dealing with indirect reads and writes towards certain PHY devices, move the code which deals with binding the PHY device to the slave MII bus created by DSA to its own function: dsa_slave_phy_connect(). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-10 23:57:12 +00:00
return -ENODEV;
net: dsa: better error reporting Add additional error reporting to the generic DSA code, so it's easier to debug when things go wrong. This was useful when initially bringing up 88e6176 on a new board. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-03 17:09:07 +00:00
}
net: dsa: move PHY setup on DSA MII bus to its own function In preparation for dealing with indirect reads and writes towards certain PHY devices, move the code which deals with binding the PHY device to the slave MII bus created by DSA to its own function: dsa_slave_phy_connect(). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-10 23:57:12 +00:00
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
user_dev->phydev->dev_flags |= flags;
net: dsa: dsa_slave_phy_connect(): extend phy's flags with port specific phy flags The current get_phy_flags() is only processed when we connect to a PHY via a designed phy-handle property via phylink_of_phy_connect(), but if we fallback on the internal MDIO bus created by a switch and take the dsa_slave_phy_connect() path then we would not be processing that flag and using it at PHY connection time. Suggested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-14 04:31:24 +00:00
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
return phylink_connect_phy(dp->pl, user_dev->phydev);
net: dsa: Add PHYLINK switch operations In preparation for adding support for PHYLINK within DSA, define a number of operations that we will need and that switch drivers can start implementing. Proper integration with PHYLINK will follow in subsequent patches. We start selecting PHYLINK (which implies PHYLIB) in net/dsa/Kconfig such that drivers can be guaranteed that this dependency is properly taken care of and can start referencing PHYLINK helper functions without requiring stubs or anything. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 20:17:32 +00:00
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_phy_setup(struct net_device *user_dev)
net: dsa: allow for more complex PHY setups Modify the DSA slave interface to be bound to an arbitray PHY, not just the ones that are available as child PHY devices of the switch MDIO bus. This allows us for instance to have external PHYs connected to a separate MDIO bus, but yet also connected to a given switch port. Under certain configurations, the physical port mask might not be a 1:1 mapping to the MII PHYs mask. This is the case, if e.g: Port 1 of the switch is used and connects to a PHY at a MDIO address different than 1. Introduce a phys_mii_mask variable which allows driver to implement and divert their own MDIO read/writes operations for a subset of the MDIO PHY addresses. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-28 00:04:51 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(user_dev);
net: dsa: add slave to port helper Many portions of DSA core code require to get the dsa_port structure corresponding to a slave net_device. For this purpose, introduce a dsa_slave_to_port() helper. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 15:12:15 +00:00
struct device_node *port_dn = dp->dn;
struct dsa_switch *ds = dp->ds;
net: dsa: allow switch drivers to specify phy_device::dev_flags Some switch drivers (e.g: bcm_sf2) may have to communicate specific workarounds or flags towards the PHY device driver. Allow switches driver to be delegated that task by introducing a get_phy_flags() callback which will do just that. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19 20:07:54 +00:00
u32 phy_flags = 0;
net: of_get_phy_mode: Change API to solve int/unit warnings Before this change of_get_phy_mode() returned an enum, phy_interface_t. On error, -ENODEV etc, is returned. If the result of the function is stored in a variable of type phy_interface_t, and the compiler has decided to represent this as an unsigned int, comparision with -ENODEV etc, is a signed vs unsigned comparision. Fix this problem by changing the API. Make the function return an error, or 0 on success, and pass a pointer, of type phy_interface_t, where the phy mode should be stored. v2: Return with *interface set to PHY_INTERFACE_MODE_NA on error. Add error checks to all users of of_get_phy_mode() Fixup a few reverse christmas tree errors Fixup a few slightly malformed reverse christmas trees v3: Fix 0-day reported errors. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-04 01:40:33 +00:00
int ret;
net: dsa: allow for more complex PHY setups Modify the DSA slave interface to be bound to an arbitray PHY, not just the ones that are available as child PHY devices of the switch MDIO bus. This allows us for instance to have external PHYs connected to a separate MDIO bus, but yet also connected to a given switch port. Under certain configurations, the physical port mask might not be a 1:1 mapping to the MII PHYs mask. This is the case, if e.g: Port 1 of the switch is used and connects to a PHY at a MDIO address different than 1. Introduce a phys_mii_mask variable which allows driver to implement and divert their own MDIO read/writes operations for a subset of the MDIO PHY addresses. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-28 00:04:51 +00:00
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dp->pl_config.dev = &user_dev->dev;
net: phylink: Add struct phylink_config to PHYLINK API The phylink_config structure will encapsulate a pointer to a struct device and the operation type requested for this instance of PHYLINK. This patch does not make any functional changes, it just transitions the PHYLINK internals and all its users to the new API. A pointer to a phylink_config structure will be passed to phylink_create() instead of the net_device directly. Also, the same phylink_config pointer will be passed back to all phylink_mac_ops callbacks instead of the net_device. Using this mechanism, a PHYLINK user can get the original net_device using a structure such as 'to_net_dev(config->dev)' or directly the structure containing the phylink_config using a container_of call. At the moment, only the PHYLINK_NETDEV is defined as a valid operation type for PHYLINK. In this mode, a valid reference to a struct device linked to the original net_device should be passed to PHYLINK through the phylink_config structure. This API changes is mainly driven by the necessity of adding a new operation type in PHYLINK that disconnects the phy_device from the net_device and also works when the net_device is lacking. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-28 17:38:12 +00:00
dp->pl_config.type = PHYLINK_NETDEV;
net: phylink, dsa: eliminate phylink_fixed_state_cb() Move the callback into the phylink_config structure, rather than providing a callback to set this up. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-23 16:02:56 +00:00
/* The get_fixed_state callback takes precedence over polling the
* link GPIO in PHYLINK (see phylink_get_fixed_state). Only set
* this if the switch provides such a callback.
*/
if (ds->ops->phylink_fixed_state) {
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dp->pl_config.get_fixed_state = dsa_user_phylink_fixed_state;
net: phylink, dsa: eliminate phylink_fixed_state_cb() Move the callback into the phylink_config structure, rather than providing a callback to set this up. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-23 16:02:56 +00:00
dp->pl_config.poll_fixed_state = true;
}
net: dsa: consolidate phylink creation The code in port.c and slave.c creating the phylink instance is very similar - let's consolidate this into a single function. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Marek Behún <kabel@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-30 13:09:55 +00:00
ret = dsa_port_phylink_create(dp);
if (ret)
return ret;
net: dsa: allow for more complex PHY setups Modify the DSA slave interface to be bound to an arbitray PHY, not just the ones that are available as child PHY devices of the switch MDIO bus. This allows us for instance to have external PHYs connected to a separate MDIO bus, but yet also connected to a given switch port. Under certain configurations, the physical port mask might not be a 1:1 mapping to the MII PHYs mask. This is the case, if e.g: Port 1 of the switch is used and connects to a PHY at a MDIO address different than 1. Introduce a phys_mii_mask variable which allows driver to implement and divert their own MDIO read/writes operations for a subset of the MDIO PHY addresses. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-28 00:04:51 +00:00
net: dsa: rename switch operations structure Now that the dsa_switch_driver structure contains only function pointers as it is supposed to, rename it to the more appropriate dsa_switch_ops, uniformly to any other operations structure in the kernel. No functional changes here, basically just the result of something like: s/dsa_switch_driver *drv/dsa_switch_ops *ops/g However keep the {un,}register_switch_driver functions and their dsa_switch_drivers list as is, since they represent the -- likely to be deprecated soon -- legacy DSA registration framework. In the meantime, also fix the following checks from checkpatch.pl to make it happy with this patch: CHECK: Comparison to NULL could be written "!ops" #403: FILE: net/dsa/dsa.c:470: + if (ops == NULL) { CHECK: Comparison to NULL could be written "ds->ops->get_strings" #773: FILE: net/dsa/slave.c:697: + if (ds->ops->get_strings != NULL) CHECK: Comparison to NULL could be written "ds->ops->get_ethtool_stats" #824: FILE: net/dsa/slave.c:785: + if (ds->ops->get_ethtool_stats != NULL) CHECK: Comparison to NULL could be written "ds->ops->get_sset_count" #835: FILE: net/dsa/slave.c:798: + if (ds->ops->get_sset_count != NULL) total: 0 errors, 0 warnings, 4 checks, 784 lines checked Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23 16:38:56 +00:00
if (ds->ops->get_phy_flags)
net: dsa: add slave to port helper Many portions of DSA core code require to get the dsa_port structure corresponding to a slave net_device. For this purpose, introduce a dsa_slave_to_port() helper. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 15:12:15 +00:00
phy_flags = ds->ops->get_phy_flags(ds, dp->index);
net: dsa: allow switch drivers to specify phy_device::dev_flags Some switch drivers (e.g: bcm_sf2) may have to communicate specific workarounds or flags towards the PHY device driver. Allow switches driver to be delegated that task by introducing a get_phy_flags() callback which will do just that. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19 20:07:54 +00:00
net: dsa: Plug in PHYLINK support Add support for PHYLINK within the DSA subsystem in order to support more complex devices such as pluggable (SFP) and non-pluggable (SFF) modules, 10G PHYs, and traditional PHYs. Using PHYLINK allows us to drop some amount of complexity we had while probing fixed and non-fixed PHYs using Device Tree. Because PHYLINK separates the Ethernet MAC/port configuration into different stages, we let switch drivers implement those, and for now, we maintain functionality by calling dsa_slave_adjust_link() during phylink_mac_link_{up,down} which provides semantically equivalent steps. Drivers willing to take advantage of PHYLINK should implement the phylink_mac_* operations that DSA wraps. We cannot quite remove the adjust_link() callback just yet, because a number of drivers rely on that for configuring their "CPU" and "DSA" ports, this is done dsa_port_setup_phy_of() and dsa_port_fixed_link_register_of() still. Drivers that utilize fixed links for user-facing ports (e.g: bcm_sf2) will need to implement phylink_mac_ops from now on to preserve functionality, since PHYLINK *does not* create a phy_device instance for fixed links. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 20:17:36 +00:00
ret = phylink_of_phy_connect(dp->pl, port_dn, phy_flags);
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
if (ret == -ENODEV && ds->user_mii_bus) {
net: dsa: Avoid null pointer when failing to connect to PHY When phylink_of_phy_connect fails, dsa_slave_phy_setup tries to save the day by connecting to an alternative PHY, none other than a PHY on the switch's internal MDIO bus, at an address equal to the port's index. However this does not take into consideration the scenario when the switch that failed to probe an external PHY does not have an internal MDIO bus at all. Fixes: aab9c4067d23 ("net: dsa: Plug in PHYLINK support") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-23 23:24:07 +00:00
/* We could not connect to a designated PHY or SFP, so try to
* use the switch internal MDIO bus instead
net: dsa: Plug in PHYLINK support Add support for PHYLINK within the DSA subsystem in order to support more complex devices such as pluggable (SFP) and non-pluggable (SFF) modules, 10G PHYs, and traditional PHYs. Using PHYLINK allows us to drop some amount of complexity we had while probing fixed and non-fixed PHYs using Device Tree. Because PHYLINK separates the Ethernet MAC/port configuration into different stages, we let switch drivers implement those, and for now, we maintain functionality by calling dsa_slave_adjust_link() during phylink_mac_link_{up,down} which provides semantically equivalent steps. Drivers willing to take advantage of PHYLINK should implement the phylink_mac_* operations that DSA wraps. We cannot quite remove the adjust_link() callback just yet, because a number of drivers rely on that for configuring their "CPU" and "DSA" ports, this is done dsa_port_setup_phy_of() and dsa_port_fixed_link_register_of() still. Drivers that utilize fixed links for user-facing ports (e.g: bcm_sf2) will need to implement phylink_mac_ops from now on to preserve functionality, since PHYLINK *does not* create a phy_device instance for fixed links. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 20:17:36 +00:00
*/
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
ret = dsa_user_phy_connect(user_dev, dp->index, phy_flags);
net: dsa: destroy the phylink instance on any error in dsa_slave_phy_setup DSA supports connecting to a phy-handle, and has a fallback to a non-OF based method of connecting to an internal PHY on the switch's own MDIO bus, if no phy-handle and no fixed-link nodes were present. The -ENODEV error code from the first attempt (phylink_of_phy_connect) is what triggers the second attempt (phylink_connect_phy). However, when the first attempt returns a different error code than -ENODEV, this results in an unbalance of calls to phylink_create and phylink_destroy by the time we exit the function. The phylink instance has leaked. There are many other error codes that can be returned by phylink_of_phy_connect. For example, phylink_validate returns -EINVAL. So this is a practical issue too. Fixes: aab9c4067d23 ("net: dsa: Plug in PHYLINK support") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20210914134331.2303380-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-14 13:43:31 +00:00
}
if (ret) {
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
netdev_err(user_dev, "failed to connect to PHY: %pe\n",
net: dsa: destroy the phylink instance on any error in dsa_slave_phy_setup DSA supports connecting to a phy-handle, and has a fallback to a non-OF based method of connecting to an internal PHY on the switch's own MDIO bus, if no phy-handle and no fixed-link nodes were present. The -ENODEV error code from the first attempt (phylink_of_phy_connect) is what triggers the second attempt (phylink_connect_phy). However, when the first attempt returns a different error code than -ENODEV, this results in an unbalance of calls to phylink_create and phylink_destroy by the time we exit the function. The phylink instance has leaked. There are many other error codes that can be returned by phylink_of_phy_connect. For example, phylink_validate returns -EINVAL. So this is a practical issue too. Fixes: aab9c4067d23 ("net: dsa: Plug in PHYLINK support") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20210914134331.2303380-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-14 13:43:31 +00:00
ERR_PTR(ret));
net: dsa: don't leave dangling pointers in dp->pl when failing There is a desire to simplify the dsa_port registration path with devlink, and this involves reworking a bit how user ports which fail to connect to their PHY (because it's missing) get reinitialized as UNUSED devlink ports. The desire is for the change to look something like this; basically dsa_port_setup() has failed, we just change dp->type and call dsa_port_setup() again. -/* Destroy the current devlink port, and create a new one which has the UNUSED - * flavour. - */ -static int dsa_port_reinit_as_unused(struct dsa_port *dp) +static int dsa_port_setup_as_unused(struct dsa_port *dp) { - dsa_port_devlink_teardown(dp); dp->type = DSA_PORT_TYPE_UNUSED; - return dsa_port_devlink_setup(dp); + return dsa_port_setup(dp); } For an UNUSED port, dsa_port_setup() mostly only calls dsa_port_devlink_setup() anyway, so we could get away with calling just that. But if we call the full blown dsa_port_setup(dp) (which will be needed to properly set dp->setup = true), the callee will have the tendency to go through this code block too, and call dsa_port_disable(dp): switch (dp->type) { case DSA_PORT_TYPE_UNUSED: dsa_port_disable(dp); break; That is not very good, because dsa_port_disable() has this hidden inside of it: if (dp->pl) phylink_stop(dp->pl); Fact is, we are not prepared to handle a call to dsa_port_disable() with a struct dsa_port that came from a previous (and failed) call to dsa_port_setup(). We do not clean up dp->pl, and this will make the second call to dsa_port_setup() call phylink_stop() on a dangling dp->pl pointer. Solve this by creating an API for phylink destruction which is symmetric to the phylink creation, and never leave dp->pl set to anything except NULL or a valid phylink structure. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-29 07:29:00 +00:00
dsa_port_phylink_destroy(dp);
net: dsa: slave: Fix autoneg for phys on switch MDIO bus When the ports phys are connected to the switches internal MDIO bus, we need to connect the phy to the slave netdev, otherwise auto-negotiation etc, does not work. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05 18:47:28 +00:00
}
net: dsa: propagate error code from dsa_slave_phy_setup In case we cannot attach to our slave netdevice PHY, error out and propagate that error up to the caller: dsa_slave_create(). Fixes: 0d8bcdd383b8 ("net: dsa: allow for more complex PHY setups") Signed-off-by: Andrey Volkov <andrey.volkov@nexvision.fr> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-11 20:49:16 +00:00
net: dsa: Avoid null pointer when failing to connect to PHY When phylink_of_phy_connect fails, dsa_slave_phy_setup tries to save the day by connecting to an alternative PHY, none other than a PHY on the switch's internal MDIO bus, at an address equal to the port's index. However this does not take into consideration the scenario when the switch that failed to probe an external PHY does not have an internal MDIO bus at all. Fixes: aab9c4067d23 ("net: dsa: Plug in PHYLINK support") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-23 23:24:07 +00:00
return ret;
net: dsa: allow for more complex PHY setups Modify the DSA slave interface to be bound to an arbitray PHY, not just the ones that are available as child PHY devices of the switch MDIO bus. This allows us for instance to have external PHYs connected to a separate MDIO bus, but yet also connected to a given switch port. Under certain configurations, the physical port mask might not be a 1:1 mapping to the MII PHYs mask. This is the case, if e.g: Port 1 of the switch is used and connects to a PHY at a MDIO address different than 1. Introduce a phys_mii_mask variable which allows driver to implement and divert their own MDIO read/writes operations for a subset of the MDIO PHY addresses. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-28 00:04:51 +00:00
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
void dsa_user_setup_tagger(struct net_device *user)
net: dsa: allow changing the tag protocol via the "tagging" device attribute Currently DSA exposes the following sysfs: $ cat /sys/class/net/eno2/dsa/tagging ocelot which is a read-only device attribute, introduced in the kernel as commit 98cdb4807123 ("net: dsa: Expose tagging protocol to user-space"), and used by libpcap since its commit 993db3800d7d ("Add support for DSA link-layer types"). It would be nice if we could extend this device attribute by making it writable: $ echo ocelot-8021q > /sys/class/net/eno2/dsa/tagging This is useful with DSA switches that can make use of more than one tagging protocol. It may be useful in dsa_loop in the future too, to perform offline testing of various taggers, or for changing between dsa and edsa on Marvell switches, if that is desirable. In terms of implementation, drivers can support this feature by implementing .change_tag_protocol, which should always leave the switch in a consistent state: either with the new protocol if things went well, or with the old one if something failed. Teardown of the old protocol, if necessary, must be handled by the driver. Some things remain as before: - The .get_tag_protocol is currently only called at probe time, to load the initial tagging protocol driver. Nonetheless, new drivers should report the tagging protocol in current use now. - The driver should manage by itself the initial setup of tagging protocol, no later than the .setup() method, as well as destroying resources used by the last tagger in use, no earlier than the .teardown() method. For multi-switch DSA trees, error handling is a bit more complicated, since e.g. the 5th out of 7 switches may fail to change the tag protocol. When that happens, a revert to the original tag protocol is attempted, but that may fail too, leaving the tree in an inconsistent state despite each individual switch implementing .change_tag_protocol transactionally. Since the intersection between drivers that implement .change_tag_protocol and drivers that support D in DSA is currently the empty set, the possibility for this error to happen is ignored for now. Testing: $ insmod mscc_felix.ko [ 79.549784] mscc_felix 0000:00:00.5: Adding to iommu group 14 [ 79.565712] mscc_felix 0000:00:00.5: Failed to register DSA switch: -517 $ insmod tag_ocelot.ko $ rmmod mscc_felix.ko $ insmod mscc_felix.ko [ 97.261724] libphy: VSC9959 internal MDIO bus: probed [ 97.267363] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 0 [ 97.274998] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 1 [ 97.282561] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 2 [ 97.289700] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 3 [ 97.599163] mscc_felix 0000:00:00.5 swp0 (uninitialized): PHY [0000:00:00.3:10] driver [Microsemi GE VSC8514 SyncE] (irq=POLL) [ 97.862034] mscc_felix 0000:00:00.5 swp1 (uninitialized): PHY [0000:00:00.3:11] driver [Microsemi GE VSC8514 SyncE] (irq=POLL) [ 97.950731] mscc_felix 0000:00:00.5 swp0: configuring for inband/qsgmii link mode [ 97.964278] 8021q: adding VLAN 0 to HW filter on device swp0 [ 98.146161] mscc_felix 0000:00:00.5 swp2 (uninitialized): PHY [0000:00:00.3:12] driver [Microsemi GE VSC8514 SyncE] (irq=POLL) [ 98.238649] mscc_felix 0000:00:00.5 swp1: configuring for inband/qsgmii link mode [ 98.251845] 8021q: adding VLAN 0 to HW filter on device swp1 [ 98.433916] mscc_felix 0000:00:00.5 swp3 (uninitialized): PHY [0000:00:00.3:13] driver [Microsemi GE VSC8514 SyncE] (irq=POLL) [ 98.485542] mscc_felix 0000:00:00.5: configuring for fixed/internal link mode [ 98.503584] mscc_felix 0000:00:00.5: Link is Up - 2.5Gbps/Full - flow control rx/tx [ 98.527948] device eno2 entered promiscuous mode [ 98.544755] DSA: tree 0 setup $ ping 10.0.0.1 PING 10.0.0.1 (10.0.0.1): 56 data bytes 64 bytes from 10.0.0.1: seq=0 ttl=64 time=2.337 ms 64 bytes from 10.0.0.1: seq=1 ttl=64 time=0.754 ms ^C - 10.0.0.1 ping statistics - 2 packets transmitted, 2 packets received, 0% packet loss round-trip min/avg/max = 0.754/1.545/2.337 ms $ cat /sys/class/net/eno2/dsa/tagging ocelot $ cat ./test_ocelot_8021q.sh #!/bin/bash ip link set swp0 down ip link set swp1 down ip link set swp2 down ip link set swp3 down ip link set swp5 down ip link set eno2 down echo ocelot-8021q > /sys/class/net/eno2/dsa/tagging ip link set eno2 up ip link set swp0 up ip link set swp1 up ip link set swp2 up ip link set swp3 up ip link set swp5 up $ ./test_ocelot_8021q.sh ./test_ocelot_8021q.sh: line 9: echo: write error: Protocol not available $ rmmod tag_ocelot.ko rmmod: can't unload module 'tag_ocelot': Resource temporarily unavailable $ insmod tag_ocelot_8021q.ko $ ./test_ocelot_8021q.sh $ cat /sys/class/net/eno2/dsa/tagging ocelot-8021q $ rmmod tag_ocelot.ko $ rmmod tag_ocelot_8021q.ko rmmod: can't unload module 'tag_ocelot_8021q': Resource temporarily unavailable $ ping 10.0.0.1 PING 10.0.0.1 (10.0.0.1): 56 data bytes 64 bytes from 10.0.0.1: seq=0 ttl=64 time=0.953 ms 64 bytes from 10.0.0.1: seq=1 ttl=64 time=0.787 ms 64 bytes from 10.0.0.1: seq=2 ttl=64 time=0.771 ms $ rmmod mscc_felix.ko [ 645.544426] mscc_felix 0000:00:00.5: Link is Down [ 645.838608] DSA: tree 0 torn down $ rmmod tag_ocelot_8021q.ko Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-29 01:00:06 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(user);
struct net_device *conduit = dsa_port_to_conduit(dp);
struct dsa_user_priv *p = netdev_priv(user);
net: dsa: allow changing the tag protocol via the "tagging" device attribute Currently DSA exposes the following sysfs: $ cat /sys/class/net/eno2/dsa/tagging ocelot which is a read-only device attribute, introduced in the kernel as commit 98cdb4807123 ("net: dsa: Expose tagging protocol to user-space"), and used by libpcap since its commit 993db3800d7d ("Add support for DSA link-layer types"). It would be nice if we could extend this device attribute by making it writable: $ echo ocelot-8021q > /sys/class/net/eno2/dsa/tagging This is useful with DSA switches that can make use of more than one tagging protocol. It may be useful in dsa_loop in the future too, to perform offline testing of various taggers, or for changing between dsa and edsa on Marvell switches, if that is desirable. In terms of implementation, drivers can support this feature by implementing .change_tag_protocol, which should always leave the switch in a consistent state: either with the new protocol if things went well, or with the old one if something failed. Teardown of the old protocol, if necessary, must be handled by the driver. Some things remain as before: - The .get_tag_protocol is currently only called at probe time, to load the initial tagging protocol driver. Nonetheless, new drivers should report the tagging protocol in current use now. - The driver should manage by itself the initial setup of tagging protocol, no later than the .setup() method, as well as destroying resources used by the last tagger in use, no earlier than the .teardown() method. For multi-switch DSA trees, error handling is a bit more complicated, since e.g. the 5th out of 7 switches may fail to change the tag protocol. When that happens, a revert to the original tag protocol is attempted, but that may fail too, leaving the tree in an inconsistent state despite each individual switch implementing .change_tag_protocol transactionally. Since the intersection between drivers that implement .change_tag_protocol and drivers that support D in DSA is currently the empty set, the possibility for this error to happen is ignored for now. Testing: $ insmod mscc_felix.ko [ 79.549784] mscc_felix 0000:00:00.5: Adding to iommu group 14 [ 79.565712] mscc_felix 0000:00:00.5: Failed to register DSA switch: -517 $ insmod tag_ocelot.ko $ rmmod mscc_felix.ko $ insmod mscc_felix.ko [ 97.261724] libphy: VSC9959 internal MDIO bus: probed [ 97.267363] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 0 [ 97.274998] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 1 [ 97.282561] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 2 [ 97.289700] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 3 [ 97.599163] mscc_felix 0000:00:00.5 swp0 (uninitialized): PHY [0000:00:00.3:10] driver [Microsemi GE VSC8514 SyncE] (irq=POLL) [ 97.862034] mscc_felix 0000:00:00.5 swp1 (uninitialized): PHY [0000:00:00.3:11] driver [Microsemi GE VSC8514 SyncE] (irq=POLL) [ 97.950731] mscc_felix 0000:00:00.5 swp0: configuring for inband/qsgmii link mode [ 97.964278] 8021q: adding VLAN 0 to HW filter on device swp0 [ 98.146161] mscc_felix 0000:00:00.5 swp2 (uninitialized): PHY [0000:00:00.3:12] driver [Microsemi GE VSC8514 SyncE] (irq=POLL) [ 98.238649] mscc_felix 0000:00:00.5 swp1: configuring for inband/qsgmii link mode [ 98.251845] 8021q: adding VLAN 0 to HW filter on device swp1 [ 98.433916] mscc_felix 0000:00:00.5 swp3 (uninitialized): PHY [0000:00:00.3:13] driver [Microsemi GE VSC8514 SyncE] (irq=POLL) [ 98.485542] mscc_felix 0000:00:00.5: configuring for fixed/internal link mode [ 98.503584] mscc_felix 0000:00:00.5: Link is Up - 2.5Gbps/Full - flow control rx/tx [ 98.527948] device eno2 entered promiscuous mode [ 98.544755] DSA: tree 0 setup $ ping 10.0.0.1 PING 10.0.0.1 (10.0.0.1): 56 data bytes 64 bytes from 10.0.0.1: seq=0 ttl=64 time=2.337 ms 64 bytes from 10.0.0.1: seq=1 ttl=64 time=0.754 ms ^C - 10.0.0.1 ping statistics - 2 packets transmitted, 2 packets received, 0% packet loss round-trip min/avg/max = 0.754/1.545/2.337 ms $ cat /sys/class/net/eno2/dsa/tagging ocelot $ cat ./test_ocelot_8021q.sh #!/bin/bash ip link set swp0 down ip link set swp1 down ip link set swp2 down ip link set swp3 down ip link set swp5 down ip link set eno2 down echo ocelot-8021q > /sys/class/net/eno2/dsa/tagging ip link set eno2 up ip link set swp0 up ip link set swp1 up ip link set swp2 up ip link set swp3 up ip link set swp5 up $ ./test_ocelot_8021q.sh ./test_ocelot_8021q.sh: line 9: echo: write error: Protocol not available $ rmmod tag_ocelot.ko rmmod: can't unload module 'tag_ocelot': Resource temporarily unavailable $ insmod tag_ocelot_8021q.ko $ ./test_ocelot_8021q.sh $ cat /sys/class/net/eno2/dsa/tagging ocelot-8021q $ rmmod tag_ocelot.ko $ rmmod tag_ocelot_8021q.ko rmmod: can't unload module 'tag_ocelot_8021q': Resource temporarily unavailable $ ping 10.0.0.1 PING 10.0.0.1 (10.0.0.1): 56 data bytes 64 bytes from 10.0.0.1: seq=0 ttl=64 time=0.953 ms 64 bytes from 10.0.0.1: seq=1 ttl=64 time=0.787 ms 64 bytes from 10.0.0.1: seq=2 ttl=64 time=0.771 ms $ rmmod mscc_felix.ko [ 645.544426] mscc_felix 0000:00:00.5: Link is Down [ 645.838608] DSA: tree 0 torn down $ rmmod tag_ocelot_8021q.ko Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-29 01:00:06 +00:00
const struct dsa_port *cpu_dp = dp->cpu_dp;
net: dsa: let drivers state that they need VLAN filtering while standalone As explained in commit e358bef7c392 ("net: dsa: Give drivers the chance to veto certain upper devices"), the hellcreek driver uses some tricks to comply with the network stack expectations: it enforces port separation in standalone mode using VLANs. For untagged traffic, bridging between ports is prevented by using different PVIDs, and for VLAN-tagged traffic, it never accepts 8021q uppers with the same VID on two ports, so packets with one VLAN cannot leak from one port to another. That is almost fine*, and has worked because hellcreek relied on an implicit behavior of the DSA core that was changed by the previous patch: the standalone ports declare the 'rx-vlan-filter' feature as 'on [fixed]'. Since most of the DSA drivers are actually VLAN-unaware in standalone mode, that feature was actually incorrectly reflecting the hardware/driver state, so there was a desire to fix it. This leaves the hellcreek driver in a situation where it has to explicitly request this behavior from the DSA framework. We configure the ports as follows: - Standalone: 'rx-vlan-filter' is on. An 8021q upper on top of a standalone hellcreek port will go through dsa_slave_vlan_rx_add_vid and will add a VLAN to the hardware tables, giving the driver the opportunity to refuse it through .port_prechangeupper. - Bridged with vlan_filtering=0: 'rx-vlan-filter' is off. An 8021q upper on top of a bridged hellcreek port will not go through dsa_slave_vlan_rx_add_vid, because there will not be any attempt to offload this VLAN. The driver already disables VLAN awareness, so that upper should receive the traffic it needs. - Bridged with vlan_filtering=1: 'rx-vlan-filter' is on. An 8021q upper on top of a bridged hellcreek port will call dsa_slave_vlan_rx_add_vid, and can again be vetoed through .port_prechangeupper. *It is not actually completely fine, because if I follow through correctly, we can have the following situation: ip link add br0 type bridge vlan_filtering 0 ip link set lan0 master br0 # lan0 now becomes VLAN-unaware ip link set lan0 nomaster # lan0 fails to become VLAN-aware again, therefore breaking isolation This patch fixes that corner case by extending the DSA core logic, based on this requested attribute, to change the VLAN awareness state of the switch (port) when it leaves the bridge. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-23 21:22:58 +00:00
const struct dsa_switch *ds = dp->ds;
net: dsa: allow changing the tag protocol via the "tagging" device attribute Currently DSA exposes the following sysfs: $ cat /sys/class/net/eno2/dsa/tagging ocelot which is a read-only device attribute, introduced in the kernel as commit 98cdb4807123 ("net: dsa: Expose tagging protocol to user-space"), and used by libpcap since its commit 993db3800d7d ("Add support for DSA link-layer types"). It would be nice if we could extend this device attribute by making it writable: $ echo ocelot-8021q > /sys/class/net/eno2/dsa/tagging This is useful with DSA switches that can make use of more than one tagging protocol. It may be useful in dsa_loop in the future too, to perform offline testing of various taggers, or for changing between dsa and edsa on Marvell switches, if that is desirable. In terms of implementation, drivers can support this feature by implementing .change_tag_protocol, which should always leave the switch in a consistent state: either with the new protocol if things went well, or with the old one if something failed. Teardown of the old protocol, if necessary, must be handled by the driver. Some things remain as before: - The .get_tag_protocol is currently only called at probe time, to load the initial tagging protocol driver. Nonetheless, new drivers should report the tagging protocol in current use now. - The driver should manage by itself the initial setup of tagging protocol, no later than the .setup() method, as well as destroying resources used by the last tagger in use, no earlier than the .teardown() method. For multi-switch DSA trees, error handling is a bit more complicated, since e.g. the 5th out of 7 switches may fail to change the tag protocol. When that happens, a revert to the original tag protocol is attempted, but that may fail too, leaving the tree in an inconsistent state despite each individual switch implementing .change_tag_protocol transactionally. Since the intersection between drivers that implement .change_tag_protocol and drivers that support D in DSA is currently the empty set, the possibility for this error to happen is ignored for now. Testing: $ insmod mscc_felix.ko [ 79.549784] mscc_felix 0000:00:00.5: Adding to iommu group 14 [ 79.565712] mscc_felix 0000:00:00.5: Failed to register DSA switch: -517 $ insmod tag_ocelot.ko $ rmmod mscc_felix.ko $ insmod mscc_felix.ko [ 97.261724] libphy: VSC9959 internal MDIO bus: probed [ 97.267363] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 0 [ 97.274998] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 1 [ 97.282561] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 2 [ 97.289700] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 3 [ 97.599163] mscc_felix 0000:00:00.5 swp0 (uninitialized): PHY [0000:00:00.3:10] driver [Microsemi GE VSC8514 SyncE] (irq=POLL) [ 97.862034] mscc_felix 0000:00:00.5 swp1 (uninitialized): PHY [0000:00:00.3:11] driver [Microsemi GE VSC8514 SyncE] (irq=POLL) [ 97.950731] mscc_felix 0000:00:00.5 swp0: configuring for inband/qsgmii link mode [ 97.964278] 8021q: adding VLAN 0 to HW filter on device swp0 [ 98.146161] mscc_felix 0000:00:00.5 swp2 (uninitialized): PHY [0000:00:00.3:12] driver [Microsemi GE VSC8514 SyncE] (irq=POLL) [ 98.238649] mscc_felix 0000:00:00.5 swp1: configuring for inband/qsgmii link mode [ 98.251845] 8021q: adding VLAN 0 to HW filter on device swp1 [ 98.433916] mscc_felix 0000:00:00.5 swp3 (uninitialized): PHY [0000:00:00.3:13] driver [Microsemi GE VSC8514 SyncE] (irq=POLL) [ 98.485542] mscc_felix 0000:00:00.5: configuring for fixed/internal link mode [ 98.503584] mscc_felix 0000:00:00.5: Link is Up - 2.5Gbps/Full - flow control rx/tx [ 98.527948] device eno2 entered promiscuous mode [ 98.544755] DSA: tree 0 setup $ ping 10.0.0.1 PING 10.0.0.1 (10.0.0.1): 56 data bytes 64 bytes from 10.0.0.1: seq=0 ttl=64 time=2.337 ms 64 bytes from 10.0.0.1: seq=1 ttl=64 time=0.754 ms ^C - 10.0.0.1 ping statistics - 2 packets transmitted, 2 packets received, 0% packet loss round-trip min/avg/max = 0.754/1.545/2.337 ms $ cat /sys/class/net/eno2/dsa/tagging ocelot $ cat ./test_ocelot_8021q.sh #!/bin/bash ip link set swp0 down ip link set swp1 down ip link set swp2 down ip link set swp3 down ip link set swp5 down ip link set eno2 down echo ocelot-8021q > /sys/class/net/eno2/dsa/tagging ip link set eno2 up ip link set swp0 up ip link set swp1 up ip link set swp2 up ip link set swp3 up ip link set swp5 up $ ./test_ocelot_8021q.sh ./test_ocelot_8021q.sh: line 9: echo: write error: Protocol not available $ rmmod tag_ocelot.ko rmmod: can't unload module 'tag_ocelot': Resource temporarily unavailable $ insmod tag_ocelot_8021q.ko $ ./test_ocelot_8021q.sh $ cat /sys/class/net/eno2/dsa/tagging ocelot-8021q $ rmmod tag_ocelot.ko $ rmmod tag_ocelot_8021q.ko rmmod: can't unload module 'tag_ocelot_8021q': Resource temporarily unavailable $ ping 10.0.0.1 PING 10.0.0.1 (10.0.0.1): 56 data bytes 64 bytes from 10.0.0.1: seq=0 ttl=64 time=0.953 ms 64 bytes from 10.0.0.1: seq=1 ttl=64 time=0.787 ms 64 bytes from 10.0.0.1: seq=2 ttl=64 time=0.771 ms $ rmmod mscc_felix.ko [ 645.544426] mscc_felix 0000:00:00.5: Link is Down [ 645.838608] DSA: tree 0 torn down $ rmmod tag_ocelot_8021q.ko Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-29 01:00:06 +00:00
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
user->needed_headroom = cpu_dp->tag_ops->needed_headroom;
user->needed_tailroom = cpu_dp->tag_ops->needed_tailroom;
/* Try to save one extra realloc later in the TX path (in the conduit)
* by also inheriting the conduit's needed headroom and tailroom.
net: dsa: allow changing the tag protocol via the "tagging" device attribute Currently DSA exposes the following sysfs: $ cat /sys/class/net/eno2/dsa/tagging ocelot which is a read-only device attribute, introduced in the kernel as commit 98cdb4807123 ("net: dsa: Expose tagging protocol to user-space"), and used by libpcap since its commit 993db3800d7d ("Add support for DSA link-layer types"). It would be nice if we could extend this device attribute by making it writable: $ echo ocelot-8021q > /sys/class/net/eno2/dsa/tagging This is useful with DSA switches that can make use of more than one tagging protocol. It may be useful in dsa_loop in the future too, to perform offline testing of various taggers, or for changing between dsa and edsa on Marvell switches, if that is desirable. In terms of implementation, drivers can support this feature by implementing .change_tag_protocol, which should always leave the switch in a consistent state: either with the new protocol if things went well, or with the old one if something failed. Teardown of the old protocol, if necessary, must be handled by the driver. Some things remain as before: - The .get_tag_protocol is currently only called at probe time, to load the initial tagging protocol driver. Nonetheless, new drivers should report the tagging protocol in current use now. - The driver should manage by itself the initial setup of tagging protocol, no later than the .setup() method, as well as destroying resources used by the last tagger in use, no earlier than the .teardown() method. For multi-switch DSA trees, error handling is a bit more complicated, since e.g. the 5th out of 7 switches may fail to change the tag protocol. When that happens, a revert to the original tag protocol is attempted, but that may fail too, leaving the tree in an inconsistent state despite each individual switch implementing .change_tag_protocol transactionally. Since the intersection between drivers that implement .change_tag_protocol and drivers that support D in DSA is currently the empty set, the possibility for this error to happen is ignored for now. Testing: $ insmod mscc_felix.ko [ 79.549784] mscc_felix 0000:00:00.5: Adding to iommu group 14 [ 79.565712] mscc_felix 0000:00:00.5: Failed to register DSA switch: -517 $ insmod tag_ocelot.ko $ rmmod mscc_felix.ko $ insmod mscc_felix.ko [ 97.261724] libphy: VSC9959 internal MDIO bus: probed [ 97.267363] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 0 [ 97.274998] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 1 [ 97.282561] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 2 [ 97.289700] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 3 [ 97.599163] mscc_felix 0000:00:00.5 swp0 (uninitialized): PHY [0000:00:00.3:10] driver [Microsemi GE VSC8514 SyncE] (irq=POLL) [ 97.862034] mscc_felix 0000:00:00.5 swp1 (uninitialized): PHY [0000:00:00.3:11] driver [Microsemi GE VSC8514 SyncE] (irq=POLL) [ 97.950731] mscc_felix 0000:00:00.5 swp0: configuring for inband/qsgmii link mode [ 97.964278] 8021q: adding VLAN 0 to HW filter on device swp0 [ 98.146161] mscc_felix 0000:00:00.5 swp2 (uninitialized): PHY [0000:00:00.3:12] driver [Microsemi GE VSC8514 SyncE] (irq=POLL) [ 98.238649] mscc_felix 0000:00:00.5 swp1: configuring for inband/qsgmii link mode [ 98.251845] 8021q: adding VLAN 0 to HW filter on device swp1 [ 98.433916] mscc_felix 0000:00:00.5 swp3 (uninitialized): PHY [0000:00:00.3:13] driver [Microsemi GE VSC8514 SyncE] (irq=POLL) [ 98.485542] mscc_felix 0000:00:00.5: configuring for fixed/internal link mode [ 98.503584] mscc_felix 0000:00:00.5: Link is Up - 2.5Gbps/Full - flow control rx/tx [ 98.527948] device eno2 entered promiscuous mode [ 98.544755] DSA: tree 0 setup $ ping 10.0.0.1 PING 10.0.0.1 (10.0.0.1): 56 data bytes 64 bytes from 10.0.0.1: seq=0 ttl=64 time=2.337 ms 64 bytes from 10.0.0.1: seq=1 ttl=64 time=0.754 ms ^C - 10.0.0.1 ping statistics - 2 packets transmitted, 2 packets received, 0% packet loss round-trip min/avg/max = 0.754/1.545/2.337 ms $ cat /sys/class/net/eno2/dsa/tagging ocelot $ cat ./test_ocelot_8021q.sh #!/bin/bash ip link set swp0 down ip link set swp1 down ip link set swp2 down ip link set swp3 down ip link set swp5 down ip link set eno2 down echo ocelot-8021q > /sys/class/net/eno2/dsa/tagging ip link set eno2 up ip link set swp0 up ip link set swp1 up ip link set swp2 up ip link set swp3 up ip link set swp5 up $ ./test_ocelot_8021q.sh ./test_ocelot_8021q.sh: line 9: echo: write error: Protocol not available $ rmmod tag_ocelot.ko rmmod: can't unload module 'tag_ocelot': Resource temporarily unavailable $ insmod tag_ocelot_8021q.ko $ ./test_ocelot_8021q.sh $ cat /sys/class/net/eno2/dsa/tagging ocelot-8021q $ rmmod tag_ocelot.ko $ rmmod tag_ocelot_8021q.ko rmmod: can't unload module 'tag_ocelot_8021q': Resource temporarily unavailable $ ping 10.0.0.1 PING 10.0.0.1 (10.0.0.1): 56 data bytes 64 bytes from 10.0.0.1: seq=0 ttl=64 time=0.953 ms 64 bytes from 10.0.0.1: seq=1 ttl=64 time=0.787 ms 64 bytes from 10.0.0.1: seq=2 ttl=64 time=0.771 ms $ rmmod mscc_felix.ko [ 645.544426] mscc_felix 0000:00:00.5: Link is Down [ 645.838608] DSA: tree 0 torn down $ rmmod tag_ocelot_8021q.ko Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-29 01:00:06 +00:00
* The 8021q driver also does this.
*/
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
user->needed_headroom += conduit->needed_headroom;
user->needed_tailroom += conduit->needed_tailroom;
net: dsa: allow changing the tag protocol via the "tagging" device attribute Currently DSA exposes the following sysfs: $ cat /sys/class/net/eno2/dsa/tagging ocelot which is a read-only device attribute, introduced in the kernel as commit 98cdb4807123 ("net: dsa: Expose tagging protocol to user-space"), and used by libpcap since its commit 993db3800d7d ("Add support for DSA link-layer types"). It would be nice if we could extend this device attribute by making it writable: $ echo ocelot-8021q > /sys/class/net/eno2/dsa/tagging This is useful with DSA switches that can make use of more than one tagging protocol. It may be useful in dsa_loop in the future too, to perform offline testing of various taggers, or for changing between dsa and edsa on Marvell switches, if that is desirable. In terms of implementation, drivers can support this feature by implementing .change_tag_protocol, which should always leave the switch in a consistent state: either with the new protocol if things went well, or with the old one if something failed. Teardown of the old protocol, if necessary, must be handled by the driver. Some things remain as before: - The .get_tag_protocol is currently only called at probe time, to load the initial tagging protocol driver. Nonetheless, new drivers should report the tagging protocol in current use now. - The driver should manage by itself the initial setup of tagging protocol, no later than the .setup() method, as well as destroying resources used by the last tagger in use, no earlier than the .teardown() method. For multi-switch DSA trees, error handling is a bit more complicated, since e.g. the 5th out of 7 switches may fail to change the tag protocol. When that happens, a revert to the original tag protocol is attempted, but that may fail too, leaving the tree in an inconsistent state despite each individual switch implementing .change_tag_protocol transactionally. Since the intersection between drivers that implement .change_tag_protocol and drivers that support D in DSA is currently the empty set, the possibility for this error to happen is ignored for now. Testing: $ insmod mscc_felix.ko [ 79.549784] mscc_felix 0000:00:00.5: Adding to iommu group 14 [ 79.565712] mscc_felix 0000:00:00.5: Failed to register DSA switch: -517 $ insmod tag_ocelot.ko $ rmmod mscc_felix.ko $ insmod mscc_felix.ko [ 97.261724] libphy: VSC9959 internal MDIO bus: probed [ 97.267363] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 0 [ 97.274998] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 1 [ 97.282561] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 2 [ 97.289700] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 3 [ 97.599163] mscc_felix 0000:00:00.5 swp0 (uninitialized): PHY [0000:00:00.3:10] driver [Microsemi GE VSC8514 SyncE] (irq=POLL) [ 97.862034] mscc_felix 0000:00:00.5 swp1 (uninitialized): PHY [0000:00:00.3:11] driver [Microsemi GE VSC8514 SyncE] (irq=POLL) [ 97.950731] mscc_felix 0000:00:00.5 swp0: configuring for inband/qsgmii link mode [ 97.964278] 8021q: adding VLAN 0 to HW filter on device swp0 [ 98.146161] mscc_felix 0000:00:00.5 swp2 (uninitialized): PHY [0000:00:00.3:12] driver [Microsemi GE VSC8514 SyncE] (irq=POLL) [ 98.238649] mscc_felix 0000:00:00.5 swp1: configuring for inband/qsgmii link mode [ 98.251845] 8021q: adding VLAN 0 to HW filter on device swp1 [ 98.433916] mscc_felix 0000:00:00.5 swp3 (uninitialized): PHY [0000:00:00.3:13] driver [Microsemi GE VSC8514 SyncE] (irq=POLL) [ 98.485542] mscc_felix 0000:00:00.5: configuring for fixed/internal link mode [ 98.503584] mscc_felix 0000:00:00.5: Link is Up - 2.5Gbps/Full - flow control rx/tx [ 98.527948] device eno2 entered promiscuous mode [ 98.544755] DSA: tree 0 setup $ ping 10.0.0.1 PING 10.0.0.1 (10.0.0.1): 56 data bytes 64 bytes from 10.0.0.1: seq=0 ttl=64 time=2.337 ms 64 bytes from 10.0.0.1: seq=1 ttl=64 time=0.754 ms ^C - 10.0.0.1 ping statistics - 2 packets transmitted, 2 packets received, 0% packet loss round-trip min/avg/max = 0.754/1.545/2.337 ms $ cat /sys/class/net/eno2/dsa/tagging ocelot $ cat ./test_ocelot_8021q.sh #!/bin/bash ip link set swp0 down ip link set swp1 down ip link set swp2 down ip link set swp3 down ip link set swp5 down ip link set eno2 down echo ocelot-8021q > /sys/class/net/eno2/dsa/tagging ip link set eno2 up ip link set swp0 up ip link set swp1 up ip link set swp2 up ip link set swp3 up ip link set swp5 up $ ./test_ocelot_8021q.sh ./test_ocelot_8021q.sh: line 9: echo: write error: Protocol not available $ rmmod tag_ocelot.ko rmmod: can't unload module 'tag_ocelot': Resource temporarily unavailable $ insmod tag_ocelot_8021q.ko $ ./test_ocelot_8021q.sh $ cat /sys/class/net/eno2/dsa/tagging ocelot-8021q $ rmmod tag_ocelot.ko $ rmmod tag_ocelot_8021q.ko rmmod: can't unload module 'tag_ocelot_8021q': Resource temporarily unavailable $ ping 10.0.0.1 PING 10.0.0.1 (10.0.0.1): 56 data bytes 64 bytes from 10.0.0.1: seq=0 ttl=64 time=0.953 ms 64 bytes from 10.0.0.1: seq=1 ttl=64 time=0.787 ms 64 bytes from 10.0.0.1: seq=2 ttl=64 time=0.771 ms $ rmmod mscc_felix.ko [ 645.544426] mscc_felix 0000:00:00.5: Link is Down [ 645.838608] DSA: tree 0 torn down $ rmmod tag_ocelot_8021q.ko Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-29 01:00:06 +00:00
p->xmit = cpu_dp->tag_ops->xmit;
net: dsa: ensure linearized SKBs in case of tail taggers The function skb_put() that is used by tail taggers to make room for the DSA tag must only be called for linearized SKBS. However in case that the slave device inherited features like NETIF_F_HW_SG or NETIF_F_FRAGLIST the SKB passed to the slaves transmit function may not be linearized. Avoid those SKBs by clearing the NETIF_F_HW_SG and NETIF_F_FRAGLIST flags for tail taggers. Furthermore since the tagging protocol can be changed at runtime move the code for setting up the slaves features into dsa_slave_setup_tagger(). Suggested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21 21:56:41 +00:00
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
user->features = conduit->vlan_features | NETIF_F_HW_TC;
user->hw_features |= NETIF_F_HW_TC;
user->features |= NETIF_F_LLTX;
if (user->needed_tailroom)
user->features &= ~(NETIF_F_SG | NETIF_F_FRAGLIST);
net: dsa: let drivers state that they need VLAN filtering while standalone As explained in commit e358bef7c392 ("net: dsa: Give drivers the chance to veto certain upper devices"), the hellcreek driver uses some tricks to comply with the network stack expectations: it enforces port separation in standalone mode using VLANs. For untagged traffic, bridging between ports is prevented by using different PVIDs, and for VLAN-tagged traffic, it never accepts 8021q uppers with the same VID on two ports, so packets with one VLAN cannot leak from one port to another. That is almost fine*, and has worked because hellcreek relied on an implicit behavior of the DSA core that was changed by the previous patch: the standalone ports declare the 'rx-vlan-filter' feature as 'on [fixed]'. Since most of the DSA drivers are actually VLAN-unaware in standalone mode, that feature was actually incorrectly reflecting the hardware/driver state, so there was a desire to fix it. This leaves the hellcreek driver in a situation where it has to explicitly request this behavior from the DSA framework. We configure the ports as follows: - Standalone: 'rx-vlan-filter' is on. An 8021q upper on top of a standalone hellcreek port will go through dsa_slave_vlan_rx_add_vid and will add a VLAN to the hardware tables, giving the driver the opportunity to refuse it through .port_prechangeupper. - Bridged with vlan_filtering=0: 'rx-vlan-filter' is off. An 8021q upper on top of a bridged hellcreek port will not go through dsa_slave_vlan_rx_add_vid, because there will not be any attempt to offload this VLAN. The driver already disables VLAN awareness, so that upper should receive the traffic it needs. - Bridged with vlan_filtering=1: 'rx-vlan-filter' is on. An 8021q upper on top of a bridged hellcreek port will call dsa_slave_vlan_rx_add_vid, and can again be vetoed through .port_prechangeupper. *It is not actually completely fine, because if I follow through correctly, we can have the following situation: ip link add br0 type bridge vlan_filtering 0 ip link set lan0 master br0 # lan0 now becomes VLAN-unaware ip link set lan0 nomaster # lan0 fails to become VLAN-aware again, therefore breaking isolation This patch fixes that corner case by extending the DSA core logic, based on this requested attribute, to change the VLAN awareness state of the switch (port) when it leaves the bridge. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-23 21:22:58 +00:00
if (ds->needs_standalone_vlan_filtering)
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
user->features |= NETIF_F_HW_VLAN_CTAG_FILTER;
net: dsa: allow changing the tag protocol via the "tagging" device attribute Currently DSA exposes the following sysfs: $ cat /sys/class/net/eno2/dsa/tagging ocelot which is a read-only device attribute, introduced in the kernel as commit 98cdb4807123 ("net: dsa: Expose tagging protocol to user-space"), and used by libpcap since its commit 993db3800d7d ("Add support for DSA link-layer types"). It would be nice if we could extend this device attribute by making it writable: $ echo ocelot-8021q > /sys/class/net/eno2/dsa/tagging This is useful with DSA switches that can make use of more than one tagging protocol. It may be useful in dsa_loop in the future too, to perform offline testing of various taggers, or for changing between dsa and edsa on Marvell switches, if that is desirable. In terms of implementation, drivers can support this feature by implementing .change_tag_protocol, which should always leave the switch in a consistent state: either with the new protocol if things went well, or with the old one if something failed. Teardown of the old protocol, if necessary, must be handled by the driver. Some things remain as before: - The .get_tag_protocol is currently only called at probe time, to load the initial tagging protocol driver. Nonetheless, new drivers should report the tagging protocol in current use now. - The driver should manage by itself the initial setup of tagging protocol, no later than the .setup() method, as well as destroying resources used by the last tagger in use, no earlier than the .teardown() method. For multi-switch DSA trees, error handling is a bit more complicated, since e.g. the 5th out of 7 switches may fail to change the tag protocol. When that happens, a revert to the original tag protocol is attempted, but that may fail too, leaving the tree in an inconsistent state despite each individual switch implementing .change_tag_protocol transactionally. Since the intersection between drivers that implement .change_tag_protocol and drivers that support D in DSA is currently the empty set, the possibility for this error to happen is ignored for now. Testing: $ insmod mscc_felix.ko [ 79.549784] mscc_felix 0000:00:00.5: Adding to iommu group 14 [ 79.565712] mscc_felix 0000:00:00.5: Failed to register DSA switch: -517 $ insmod tag_ocelot.ko $ rmmod mscc_felix.ko $ insmod mscc_felix.ko [ 97.261724] libphy: VSC9959 internal MDIO bus: probed [ 97.267363] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 0 [ 97.274998] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 1 [ 97.282561] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 2 [ 97.289700] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 3 [ 97.599163] mscc_felix 0000:00:00.5 swp0 (uninitialized): PHY [0000:00:00.3:10] driver [Microsemi GE VSC8514 SyncE] (irq=POLL) [ 97.862034] mscc_felix 0000:00:00.5 swp1 (uninitialized): PHY [0000:00:00.3:11] driver [Microsemi GE VSC8514 SyncE] (irq=POLL) [ 97.950731] mscc_felix 0000:00:00.5 swp0: configuring for inband/qsgmii link mode [ 97.964278] 8021q: adding VLAN 0 to HW filter on device swp0 [ 98.146161] mscc_felix 0000:00:00.5 swp2 (uninitialized): PHY [0000:00:00.3:12] driver [Microsemi GE VSC8514 SyncE] (irq=POLL) [ 98.238649] mscc_felix 0000:00:00.5 swp1: configuring for inband/qsgmii link mode [ 98.251845] 8021q: adding VLAN 0 to HW filter on device swp1 [ 98.433916] mscc_felix 0000:00:00.5 swp3 (uninitialized): PHY [0000:00:00.3:13] driver [Microsemi GE VSC8514 SyncE] (irq=POLL) [ 98.485542] mscc_felix 0000:00:00.5: configuring for fixed/internal link mode [ 98.503584] mscc_felix 0000:00:00.5: Link is Up - 2.5Gbps/Full - flow control rx/tx [ 98.527948] device eno2 entered promiscuous mode [ 98.544755] DSA: tree 0 setup $ ping 10.0.0.1 PING 10.0.0.1 (10.0.0.1): 56 data bytes 64 bytes from 10.0.0.1: seq=0 ttl=64 time=2.337 ms 64 bytes from 10.0.0.1: seq=1 ttl=64 time=0.754 ms ^C - 10.0.0.1 ping statistics - 2 packets transmitted, 2 packets received, 0% packet loss round-trip min/avg/max = 0.754/1.545/2.337 ms $ cat /sys/class/net/eno2/dsa/tagging ocelot $ cat ./test_ocelot_8021q.sh #!/bin/bash ip link set swp0 down ip link set swp1 down ip link set swp2 down ip link set swp3 down ip link set swp5 down ip link set eno2 down echo ocelot-8021q > /sys/class/net/eno2/dsa/tagging ip link set eno2 up ip link set swp0 up ip link set swp1 up ip link set swp2 up ip link set swp3 up ip link set swp5 up $ ./test_ocelot_8021q.sh ./test_ocelot_8021q.sh: line 9: echo: write error: Protocol not available $ rmmod tag_ocelot.ko rmmod: can't unload module 'tag_ocelot': Resource temporarily unavailable $ insmod tag_ocelot_8021q.ko $ ./test_ocelot_8021q.sh $ cat /sys/class/net/eno2/dsa/tagging ocelot-8021q $ rmmod tag_ocelot.ko $ rmmod tag_ocelot_8021q.ko rmmod: can't unload module 'tag_ocelot_8021q': Resource temporarily unavailable $ ping 10.0.0.1 PING 10.0.0.1 (10.0.0.1): 56 data bytes 64 bytes from 10.0.0.1: seq=0 ttl=64 time=0.953 ms 64 bytes from 10.0.0.1: seq=1 ttl=64 time=0.787 ms 64 bytes from 10.0.0.1: seq=2 ttl=64 time=0.771 ms $ rmmod mscc_felix.ko [ 645.544426] mscc_felix 0000:00:00.5: Link is Down [ 645.838608] DSA: tree 0 torn down $ rmmod tag_ocelot_8021q.ko Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-29 01:00:06 +00:00
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
int dsa_user_suspend(struct net_device *user_dev)
net: dsa: allow switch drivers to implement suspend/resume hooks Add an abstraction layer to suspend/resume switch devices, doing the following split: - suspend/resume the slave network devices and their corresponding PHY devices - suspend/resume the switch hardware using switch driver callbacks Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19 00:31:22 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(user_dev);
net: dsa: allow switch drivers to implement suspend/resume hooks Add an abstraction layer to suspend/resume switch devices, doing the following split: - suspend/resume the slave network devices and their corresponding PHY devices - suspend/resume the switch hardware using switch driver callbacks Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19 00:31:22 +00:00
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
if (!netif_running(user_dev))
net: dsa: Do not suspend/resume closed slave_dev If a DSA slave network device was previously disabled, there is no need to suspend or resume it. Fixes: 2446254915a7 ("net: dsa: allow switch drivers to implement suspend/resume hooks") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01 00:12:52 +00:00
return 0;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
netif_device_detach(user_dev);
net: dsa: Bring back device detaching in dsa_slave_suspend() Commit 448b4482c671 ("net: dsa: Add lockdep class to tx queues to avoid lockdep splat") removed the netif_device_detach() call done in dsa_slave_suspend() which is necessary, and paired with a corresponding netif_device_attach(), bring it back. Fixes: 448b4482c671 ("net: dsa: Add lockdep class to tx queues to avoid lockdep splat") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-25 17:10:41 +00:00
net: dsa: Plug in PHYLINK support Add support for PHYLINK within the DSA subsystem in order to support more complex devices such as pluggable (SFP) and non-pluggable (SFF) modules, 10G PHYs, and traditional PHYs. Using PHYLINK allows us to drop some amount of complexity we had while probing fixed and non-fixed PHYs using Device Tree. Because PHYLINK separates the Ethernet MAC/port configuration into different stages, we let switch drivers implement those, and for now, we maintain functionality by calling dsa_slave_adjust_link() during phylink_mac_link_{up,down} which provides semantically equivalent steps. Drivers willing to take advantage of PHYLINK should implement the phylink_mac_* operations that DSA wraps. We cannot quite remove the adjust_link() callback just yet, because a number of drivers rely on that for configuring their "CPU" and "DSA" ports, this is done dsa_port_setup_phy_of() and dsa_port_fixed_link_register_of() still. Drivers that utilize fixed links for user-facing ports (e.g: bcm_sf2) will need to implement phylink_mac_ops from now on to preserve functionality, since PHYLINK *does not* create a phy_device instance for fixed links. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 20:17:36 +00:00
rtnl_lock();
phylink_stop(dp->pl);
rtnl_unlock();
net: dsa: allow switch drivers to implement suspend/resume hooks Add an abstraction layer to suspend/resume switch devices, doing the following split: - suspend/resume the slave network devices and their corresponding PHY devices - suspend/resume the switch hardware using switch driver callbacks Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19 00:31:22 +00:00
return 0;
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
int dsa_user_resume(struct net_device *user_dev)
net: dsa: allow switch drivers to implement suspend/resume hooks Add an abstraction layer to suspend/resume switch devices, doing the following split: - suspend/resume the slave network devices and their corresponding PHY devices - suspend/resume the switch hardware using switch driver callbacks Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19 00:31:22 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(user_dev);
net: dsa: Plug in PHYLINK support Add support for PHYLINK within the DSA subsystem in order to support more complex devices such as pluggable (SFP) and non-pluggable (SFF) modules, 10G PHYs, and traditional PHYs. Using PHYLINK allows us to drop some amount of complexity we had while probing fixed and non-fixed PHYs using Device Tree. Because PHYLINK separates the Ethernet MAC/port configuration into different stages, we let switch drivers implement those, and for now, we maintain functionality by calling dsa_slave_adjust_link() during phylink_mac_link_{up,down} which provides semantically equivalent steps. Drivers willing to take advantage of PHYLINK should implement the phylink_mac_* operations that DSA wraps. We cannot quite remove the adjust_link() callback just yet, because a number of drivers rely on that for configuring their "CPU" and "DSA" ports, this is done dsa_port_setup_phy_of() and dsa_port_fixed_link_register_of() still. Drivers that utilize fixed links for user-facing ports (e.g: bcm_sf2) will need to implement phylink_mac_ops from now on to preserve functionality, since PHYLINK *does not* create a phy_device instance for fixed links. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 20:17:36 +00:00
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
if (!netif_running(user_dev))
net: dsa: Do not suspend/resume closed slave_dev If a DSA slave network device was previously disabled, there is no need to suspend or resume it. Fixes: 2446254915a7 ("net: dsa: allow switch drivers to implement suspend/resume hooks") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01 00:12:52 +00:00
return 0;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
netif_device_attach(user_dev);
net: dsa: allow switch drivers to implement suspend/resume hooks Add an abstraction layer to suspend/resume switch devices, doing the following split: - suspend/resume the slave network devices and their corresponding PHY devices - suspend/resume the switch hardware using switch driver callbacks Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19 00:31:22 +00:00
net: dsa: Plug in PHYLINK support Add support for PHYLINK within the DSA subsystem in order to support more complex devices such as pluggable (SFP) and non-pluggable (SFF) modules, 10G PHYs, and traditional PHYs. Using PHYLINK allows us to drop some amount of complexity we had while probing fixed and non-fixed PHYs using Device Tree. Because PHYLINK separates the Ethernet MAC/port configuration into different stages, we let switch drivers implement those, and for now, we maintain functionality by calling dsa_slave_adjust_link() during phylink_mac_link_{up,down} which provides semantically equivalent steps. Drivers willing to take advantage of PHYLINK should implement the phylink_mac_* operations that DSA wraps. We cannot quite remove the adjust_link() callback just yet, because a number of drivers rely on that for configuring their "CPU" and "DSA" ports, this is done dsa_port_setup_phy_of() and dsa_port_fixed_link_register_of() still. Drivers that utilize fixed links for user-facing ports (e.g: bcm_sf2) will need to implement phylink_mac_ops from now on to preserve functionality, since PHYLINK *does not* create a phy_device instance for fixed links. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 20:17:36 +00:00
rtnl_lock();
phylink_start(dp->pl);
rtnl_unlock();
net: dsa: allow switch drivers to implement suspend/resume hooks Add an abstraction layer to suspend/resume switch devices, doing the following split: - suspend/resume the slave network devices and their corresponding PHY devices - suspend/resume the switch hardware using switch driver callbacks Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19 00:31:22 +00:00
return 0;
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
int dsa_user_create(struct dsa_port *port)
net: Distributed Switch Architecture protocol support Distributed Switch Architecture is a protocol for managing hardware switch chips. It consists of a set of MII management registers and commands to configure the switch, and an ethernet header format to signal which of the ports of the switch a packet was received from or is intended to be sent to. The switches that this driver supports are typically embedded in access points and routers, and a typical setup with a DSA switch looks something like this: +-----------+ +-----------+ | | RGMII | | | +-------+ +------ 1000baseT MDI ("WAN") | | | 6-port +------ 1000baseT MDI ("LAN1") | CPU | | ethernet +------ 1000baseT MDI ("LAN2") | |MIImgmt| switch +------ 1000baseT MDI ("LAN3") | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4") | | | | +-----------+ +-----------+ The switch driver presents each port on the switch as a separate network interface to Linux, polls the switch to maintain software link state of those ports, forwards MII management interface accesses to those network interfaces (e.g. as done by ethtool) to the switch, and exposes the switch's hardware statistics counters via the appropriate Linux kernel interfaces. This initial patch supports the MII management interface register layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and supports the "Ethertype DSA" packet tagging format. (There is no officially registered ethertype for the Ethertype DSA packet format, so we just grab a random one. The ethertype to use is programmed into the switch, and the switch driver uses the value of ETH_P_EDSA for this, so this define can be changed at any time in the future if the one we chose is allocated to another protocol or if Ethertype DSA gets its own officially registered ethertype, and everything will continue to work.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 13:44:02 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct net_device *conduit = dsa_port_to_conduit(port);
net: dsa: remove useless args of dsa_slave_create dsa_slave_create currently takes 4 arguments while it only needs the related dsa_port and its name. Remove all other arguments. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-05 20:20:19 +00:00
struct dsa_switch *ds = port->ds;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct net_device *user_dev;
struct dsa_user_priv *p;
net: dsa: refactor name assignment for user ports The following two patches each have a (small) chance of causing regressions for userspace and will in that case of course need to be reverted. In order to prepare for that and make those two patches independent and individually revertable, refactor the code which sets the names for user ports by moving the "fall back to eth%d if no label is given in device tree" to dsa_slave_create(). No functional change (at least none intended). Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.faineli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-16 10:52:02 +00:00
const char *name;
int assign_type;
net: Distributed Switch Architecture protocol support Distributed Switch Architecture is a protocol for managing hardware switch chips. It consists of a set of MII management registers and commands to configure the switch, and an ethernet header format to signal which of the ports of the switch a packet was received from or is intended to be sent to. The switches that this driver supports are typically embedded in access points and routers, and a typical setup with a DSA switch looks something like this: +-----------+ +-----------+ | | RGMII | | | +-------+ +------ 1000baseT MDI ("WAN") | | | 6-port +------ 1000baseT MDI ("LAN1") | CPU | | ethernet +------ 1000baseT MDI ("LAN2") | |MIImgmt| switch +------ 1000baseT MDI ("LAN3") | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4") | | | | +-----------+ +-----------+ The switch driver presents each port on the switch as a separate network interface to Linux, polls the switch to maintain software link state of those ports, forwards MII management interface accesses to those network interfaces (e.g. as done by ethtool) to the switch, and exposes the switch's hardware statistics counters via the appropriate Linux kernel interfaces. This initial patch supports the MII management interface register layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and supports the "Ethertype DSA" packet tagging format. (There is no officially registered ethertype for the Ethertype DSA packet format, so we just grab a random one. The ethertype to use is programmed into the switch, and the switch driver uses the value of ETH_P_EDSA for this, so this define can be changed at any time in the future if the one we chose is allocated to another protocol or if Ethertype DSA gets its own officially registered ethertype, and everything will continue to work.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 13:44:02 +00:00
int ret;
net: dsa: Allow switch drivers to indicate number of TX queues Let switch drivers indicate how many TX queues they support. Some switches, such as Broadcom Starfighter 2 are designed with 8 egress queues. Future changes will allow us to leverage the queue mapping and direct the transmission towards a particular queue. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-04 03:27:00 +00:00
if (!ds->num_tx_queues)
ds->num_tx_queues = 1;
net: dsa: refactor name assignment for user ports The following two patches each have a (small) chance of causing regressions for userspace and will in that case of course need to be reverted. In order to prepare for that and make those two patches independent and individually revertable, refactor the code which sets the names for user ports by moving the "fall back to eth%d if no label is given in device tree" to dsa_slave_create(). No functional change (at least none intended). Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.faineli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-16 10:52:02 +00:00
if (port->name) {
name = port->name;
net: dsa: use NET_NAME_PREDICTABLE for user ports with name given in DT When a user port has a label in device tree, the corresponding netdevice is, to quote include/uapi/linux/netdevice.h, "predictably named by the kernel". This is also explicitly one of the intended use cases for NET_NAME_PREDICTABLE, quoting 685343fc3ba6 ("net: add name_assign_type netdev attribute"): NET_NAME_PREDICTABLE: The ifname has been assigned by the kernel in a predictable way [...] Examples include [...] and names deduced from hardware properties (including being given explicitly by the firmware). Expose that information properly for the benefit of userspace tools that make decisions based on the name_assign_type attribute, e.g. a systemd-udev rule with "kernel" in NamePolicy. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.faineli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-16 10:52:03 +00:00
assign_type = NET_NAME_PREDICTABLE;
net: dsa: refactor name assignment for user ports The following two patches each have a (small) chance of causing regressions for userspace and will in that case of course need to be reverted. In order to prepare for that and make those two patches independent and individually revertable, refactor the code which sets the names for user ports by moving the "fall back to eth%d if no label is given in device tree" to dsa_slave_create(). No functional change (at least none intended). Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.faineli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-16 10:52:02 +00:00
} else {
name = "eth%d";
net: dsa: set name_assign_type to NET_NAME_ENUM for enumerated user ports When a user port does not have a label in device tree, and we thus fall back to the eth%d scheme, the proper constant to use is NET_NAME_ENUM. See also commit e9f656b7a214 ("net: ethernet: set default assignment identifier to NET_NAME_ENUM"), which in turn quoted commit 685343fc3ba6 ("net: add name_assign_type netdev attribute"): ... when the kernel has given the interface a name using global device enumeration based on order of discovery (ethX, wlanY, etc) ... are labelled NET_NAME_ENUM. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.faineli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-16 10:52:04 +00:00
assign_type = NET_NAME_ENUM;
net: dsa: refactor name assignment for user ports The following two patches each have a (small) chance of causing regressions for userspace and will in that case of course need to be reverted. In order to prepare for that and make those two patches independent and individually revertable, refactor the code which sets the names for user ports by moving the "fall back to eth%d if no label is given in device tree" to dsa_slave_create(). No functional change (at least none intended). Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.faineli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-16 10:52:02 +00:00
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
user_dev = alloc_netdev_mqs(sizeof(struct dsa_user_priv), name,
assign_type, ether_setup,
ds->num_tx_queues, 1);
if (user_dev == NULL)
net: dsa: Ensure that port array elements are initialized before being used A network device notifier can be called for one or more of the created slave devices before all slave devices have been registered. This can result in a mismatch between ds->phys_port_mask and the registered devices by the time the call is made, and it can result in a slave device being added to a bridge before its entry in ds->ports[] has been initialized. Rework the initialization code to initialize entries in ds->ports[] in dsa_slave_create. With this change, dsa_slave_create no longer needs to return slave_dev but can return an error code instead. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-24 21:15:32 +00:00
return -ENOMEM;
net: Distributed Switch Architecture protocol support Distributed Switch Architecture is a protocol for managing hardware switch chips. It consists of a set of MII management registers and commands to configure the switch, and an ethernet header format to signal which of the ports of the switch a packet was received from or is intended to be sent to. The switches that this driver supports are typically embedded in access points and routers, and a typical setup with a DSA switch looks something like this: +-----------+ +-----------+ | | RGMII | | | +-------+ +------ 1000baseT MDI ("WAN") | | | 6-port +------ 1000baseT MDI ("LAN1") | CPU | | ethernet +------ 1000baseT MDI ("LAN2") | |MIImgmt| switch +------ 1000baseT MDI ("LAN3") | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4") | | | | +-----------+ +-----------+ The switch driver presents each port on the switch as a separate network interface to Linux, polls the switch to maintain software link state of those ports, forwards MII management interface accesses to those network interfaces (e.g. as done by ethtool) to the switch, and exposes the switch's hardware statistics counters via the appropriate Linux kernel interfaces. This initial patch supports the MII management interface register layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and supports the "Ethertype DSA" packet tagging format. (There is no officially registered ethertype for the Ethertype DSA packet format, so we just grab a random one. The ethertype to use is programmed into the switch, and the switch driver uses the value of ETH_P_EDSA for this, so this define can be changed at any time in the future if the one we chose is allocated to another protocol or if Ethertype DSA gets its own officially registered ethertype, and everything will continue to work.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 13:44:02 +00:00
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
user_dev->rtnl_link_ops = &dsa_link_ops;
user_dev->ethtool_ops = &dsa_user_ethtool_ops;
net: dsa: report and change port default priority using dcbnl The port-based default QoS class is assigned to packets that lack a VLAN PCP (or the port is configured to not trust the VLAN PCP), an IP DSCP (or the port is configured to not trust IP DSCP), and packets on which no tc-skbedit action has matched. Similar to other drivers, this can be exposed to user space using the DCB Application Priority Table. IEEE 802.1Q-2018 specifies in Table D-8 - Sel field values that when the Selector is 1, the Protocol ID value of 0 denotes the "Default application priority. For use when application priority is not otherwise specified." The way in which the dcbnl integration in DSA has been designed has to do with its requirements. Andrew Lunn explains that SOHO switches are expected to come with some sort of pre-configured QoS profile, and that it is desirable for this to come pre-loaded into the DSA slave interfaces' DCB application priority table. In the dcbnl design, this is possible because calls to dcb_ieee_setapp() can be initiated by anyone including being self-initiated by this device driver. However, what makes this challenging to implement in DSA is that the DSA core manages the net_devices (effectively hiding them from drivers), while drivers manage the hardware. The DSA core has no knowledge of what individual drivers' QoS policies are. DSA could export to drivers a wrapper over dcb_ieee_setapp() and these could call that function to pre-populate the app priority table, however drivers don't have a good moment in time to do this. The dsa_switch_ops :: setup() method gets called before the net_devices are created (dsa_slave_create), and so is dsa_switch_ops :: port_setup(). What remains is dsa_switch_ops :: port_enable(), but this gets called upon each ndo_open. If we add app table entries on every open, we'd need to remove them on close, to avoid duplicate entry errors. But if we delete app priority entries on close, what we delete may not be the initial, driver pre-populated entries, but rather user-added entries. So it is clear that letting drivers choose the timing of the dcb_ieee_setapp() call is inappropriate. The alternative which was chosen is to introduce hardware-specific ops in dsa_switch_ops, and effectively hide dcbnl details from drivers as well. For pre-populating the application table, dsa_slave_dcbnl_init() will call ds->ops->port_get_default_prio() which is supposed to read from hardware. If the operation succeeds, DSA creates a default-prio app table entry. The method is called as soon as the slave_dev is registered, but before we release the rtnl_mutex. This is done such that user space sees the app table entries as soon as it sees the interface being registered. The fact that we populate slave_dev->dcbnl_ops with a non-NULL pointer changes behavior in dcb_doit() from net/dcb/dcbnl.c, which used to return -EOPNOTSUPP for any dcbnl operation where netdev->dcbnl_ops is NULL. Because there are still dcbnl-unaware DSA drivers even if they have dcbnl_ops populated, the way to restore the behavior is to make all dcbnl_ops return -EOPNOTSUPP on absence of the hardware-specific dsa_switch_ops method. The dcbnl framework absurdly allows there to be more than one app table entry for the same selector and protocol (in other words, more than one port-based default priority). In the iproute2 dcb program, there is a "replace" syntactical sugar command which performs an "add" and a "del" to hide this away. But we choose the largest configured priority when we call ds->ops->port_set_default_prio(), using __fls(). When there is no default-prio app table entry left, the port-default priority is restored to 0. Link: https://patchwork.kernel.org/project/netdevbpf/patch/20210113154139.1803705-2-olteanv@gmail.com/ Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-11 21:15:18 +00:00
#if IS_ENABLED(CONFIG_DCB)
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
user_dev->dcbnl_ops = &dsa_user_dcbnl_ops;
net: dsa: report and change port default priority using dcbnl The port-based default QoS class is assigned to packets that lack a VLAN PCP (or the port is configured to not trust the VLAN PCP), an IP DSCP (or the port is configured to not trust IP DSCP), and packets on which no tc-skbedit action has matched. Similar to other drivers, this can be exposed to user space using the DCB Application Priority Table. IEEE 802.1Q-2018 specifies in Table D-8 - Sel field values that when the Selector is 1, the Protocol ID value of 0 denotes the "Default application priority. For use when application priority is not otherwise specified." The way in which the dcbnl integration in DSA has been designed has to do with its requirements. Andrew Lunn explains that SOHO switches are expected to come with some sort of pre-configured QoS profile, and that it is desirable for this to come pre-loaded into the DSA slave interfaces' DCB application priority table. In the dcbnl design, this is possible because calls to dcb_ieee_setapp() can be initiated by anyone including being self-initiated by this device driver. However, what makes this challenging to implement in DSA is that the DSA core manages the net_devices (effectively hiding them from drivers), while drivers manage the hardware. The DSA core has no knowledge of what individual drivers' QoS policies are. DSA could export to drivers a wrapper over dcb_ieee_setapp() and these could call that function to pre-populate the app priority table, however drivers don't have a good moment in time to do this. The dsa_switch_ops :: setup() method gets called before the net_devices are created (dsa_slave_create), and so is dsa_switch_ops :: port_setup(). What remains is dsa_switch_ops :: port_enable(), but this gets called upon each ndo_open. If we add app table entries on every open, we'd need to remove them on close, to avoid duplicate entry errors. But if we delete app priority entries on close, what we delete may not be the initial, driver pre-populated entries, but rather user-added entries. So it is clear that letting drivers choose the timing of the dcb_ieee_setapp() call is inappropriate. The alternative which was chosen is to introduce hardware-specific ops in dsa_switch_ops, and effectively hide dcbnl details from drivers as well. For pre-populating the application table, dsa_slave_dcbnl_init() will call ds->ops->port_get_default_prio() which is supposed to read from hardware. If the operation succeeds, DSA creates a default-prio app table entry. The method is called as soon as the slave_dev is registered, but before we release the rtnl_mutex. This is done such that user space sees the app table entries as soon as it sees the interface being registered. The fact that we populate slave_dev->dcbnl_ops with a non-NULL pointer changes behavior in dcb_doit() from net/dcb/dcbnl.c, which used to return -EOPNOTSUPP for any dcbnl operation where netdev->dcbnl_ops is NULL. Because there are still dcbnl-unaware DSA drivers even if they have dcbnl_ops populated, the way to restore the behavior is to make all dcbnl_ops return -EOPNOTSUPP on absence of the hardware-specific dsa_switch_ops method. The dcbnl framework absurdly allows there to be more than one app table entry for the same selector and protocol (in other words, more than one port-based default priority). In the iproute2 dcb program, there is a "replace" syntactical sugar command which performs an "add" and a "del" to hide this away. But we choose the largest configured priority when we call ds->ops->port_set_default_prio(), using __fls(). When there is no default-prio app table entry left, the port-default priority is restored to 0. Link: https://patchwork.kernel.org/project/netdevbpf/patch/20210113154139.1803705-2-olteanv@gmail.com/ Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-11 21:15:18 +00:00
#endif
of: net: pass the dst buffer to of_get_mac_address() of_get_mac_address() returns a "const void*" pointer to a MAC address. Lately, support to fetch the MAC address by an NVMEM provider was added. But this will only work with platform devices. It will not work with PCI devices (e.g. of an integrated root complex) and esp. not with DSA ports. There is an of_* variant of the nvmem binding which works without devices. The returned data of a nvmem_cell_read() has to be freed after use. On the other hand the return of_get_mac_address() points to some static data without a lifetime. The trick for now, was to allocate a device resource managed buffer which is then returned. This will only work if we have an actual device. Change it, so that the caller of of_get_mac_address() has to supply a buffer where the MAC address is written to. Unfortunately, this will touch all drivers which use the of_get_mac_address(). Usually the code looks like: const char *addr; addr = of_get_mac_address(np); if (!IS_ERR(addr)) ether_addr_copy(ndev->dev_addr, addr); This can then be simply rewritten as: of_get_mac_address(np, ndev->dev_addr); Sometimes is_valid_ether_addr() is used to test the MAC address. of_get_mac_address() already makes sure, it just returns a valid MAC address. Thus we can just test its return code. But we have to be careful if there are still other sources for the MAC address before the of_get_mac_address(). In this case we have to keep the is_valid_ether_addr() call. The following coccinelle patch was used to convert common cases to the new style. Afterwards, I've manually gone over the drivers and fixed the return code variable: either used a new one or if one was already available use that. Mansour Moufid, thanks for that coccinelle patch! <spml> @a@ identifier x; expression y, z; @@ - x = of_get_mac_address(y); + x = of_get_mac_address(y, z); <... - ether_addr_copy(z, x); ...> @@ identifier a.x; @@ - if (<+... x ...+>) {} @@ identifier a.x; @@ if (<+... x ...+>) { ... } - else {} @@ identifier a.x; expression e; @@ - if (<+... x ...+>@e) - {} - else + if (!(e)) {...} @@ expression x, y, z; @@ - x = of_get_mac_address(y, z); + of_get_mac_address(y, z); ... when != x </spml> All drivers, except drivers/net/ethernet/aeroflex/greth.c, were compile-time tested. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-12 17:47:17 +00:00
if (!is_zero_ether_addr(port->mac))
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
eth_hw_addr_set(user_dev, port->mac);
net: dsa: read mac address from DT for slave device Before creating a slave netdevice, get the mac address from DTS and apply in case it is valid. Signed-off-by: Xiaofei Shen <xiaofeis@codeaurora.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-29 05:34:58 +00:00
else
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
eth_hw_addr_inherit(user_dev, conduit);
user_dev->priv_flags |= IFF_NO_QUEUE;
net: dsa: install secondary unicast and multicast addresses as host FDB/MDB In preparation of disabling flooding towards the CPU in standalone ports mode, identify the addresses requested by upper interfaces and use the new API for DSA FDB isolation to request the hardware driver to offload these as FDB or MDB objects. The objects belong to the user port's database, and are installed pointing towards the CPU port. Because dev_uc_add()/dev_mc_add() is VLAN-unaware, we offload to the port standalone database addresses with VID 0 (also VLAN-unaware). So this excludes switches with global VLAN filtering from supporting unicast filtering, because there, it is possible for a port of a switch to join a VLAN-aware bridge, and this changes the VLAN awareness of standalone ports, requiring VLAN-aware standalone host FDB entries. For the same reason, hellcreek, which requires VLAN awareness in standalone mode, is also exempted from unicast filtering. We create "standalone" variants of dsa_port_host_fdb_add() and dsa_port_host_mdb_add() (and the _del coresponding functions). We also create a separate work item type for handling deferred standalone host FDB/MDB entries compared to the switchdev one. This is done for the purpose of clarity - the procedure for offloading a bridge FDB entry is different than offloading a standalone one, and the switchdev event work handles only FDBs anyway, not MDBs. Deferral is needed for standalone entries because ndo_set_rx_mode runs in atomic context. We could probably optimize things a little by first queuing up all entries that need to be offloaded, and scheduling the work item just once, but the data structures that we can pass through __dev_uc_sync() and __dev_mc_sync() are limiting (there is nothing like a void *priv), so we'd have to keep the list of queued events somewhere in struct dsa_switch, and possibly a lock for it. Too complicated for now. Adding the address to the master is handled by dev_uc_sync(), adding it to the hardware is handled by __dev_uc_sync(). So this is the reason why dsa_port_standalone_host_fdb_add() does not call dev_uc_add(). Not that it had the rtnl_mutex anyway - ndo_set_rx_mode has it, but is atomic. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 19:14:10 +00:00
if (dsa_switch_supports_uc_filtering(ds))
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
user_dev->priv_flags |= IFF_UNICAST_FLT;
user_dev->netdev_ops = &dsa_user_netdev_ops;
net: dsa: configure the MTU for switch ports It is useful be able to configure port policers on a switch to accept frames of various sizes: - Increase the MTU for better throughput from the default of 1500 if it is known that there is no 10/100 Mbps device in the network. - Decrease the MTU to limit the latency of high-priority frames under congestion, or work around various network segments that add extra headers to packets which can't be fragmented. For DSA slave ports, this is mostly a pass-through callback, called through the regular ndo ops and at probe time (to ensure consistency across all supported switches). The CPU port is called with an MTU equal to the largest configured MTU of the slave ports. The assumption is that the user might want to sustain a bidirectional conversation with a partner over any switch port. The DSA master is configured the same as the CPU port, plus the tagger overhead. Since the MTU is by definition L2 payload (sans Ethernet header), it is up to each individual driver to figure out if it needs to do anything special for its frame tags on the CPU port (it shouldn't except in special cases). So the MTU does not contain the tagger overhead on the CPU port. However the MTU of the DSA master, minus the tagger overhead, is used as a proxy for the MTU of the CPU port, which does not have a net device. This is to avoid uselessly calling the .change_mtu function on the CPU port when nothing should change. So it is safe to assume that the DSA master and the CPU port MTUs are apart by exactly the tagger's overhead in bytes. Some changes were made around dsa_master_set_mtu(), function which was now removed, for 2 reasons: - dev_set_mtu() already calls dev_validate_mtu(), so it's redundant to do the same thing in DSA - __dev_set_mtu() returns 0 if ops->ndo_change_mtu is an absent method That is to say, there's no need for this function in DSA, we can safely call dev_set_mtu() directly, take the rtnl lock when necessary, and just propagate whatever errors get reported (since the user probably wants to be informed). Some inspiration (mainly in the MTU DSA notifier) was taken from a vaguely similar patch from Murali and Florian, who are credited as co-developers down below. Co-developed-by: Murali Krishna Policharla <murali.policharla@broadcom.com> Signed-off-by: Murali Krishna Policharla <murali.policharla@broadcom.com> Co-developed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27 19:55:42 +00:00
if (ds->ops->port_max_mtu)
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
user_dev->max_mtu = ds->ops->port_max_mtu(ds, port->index);
SET_NETDEV_DEVTYPE(user_dev, &dsa_type);
SET_NETDEV_DEV(user_dev, port->ds->dev);
SET_NETDEV_DEVLINK_PORT(user_dev, &port->devlink_port);
user_dev->dev.of_node = port->dn;
user_dev->vlan_features = conduit->vlan_features;
p = netdev_priv(user_dev);
net: dsa: Leverage core stats allocator With commit 34d21de99cea9 ("net: Move {l,t,d}stats allocation to core and convert veth & vrf"), stats allocation could be done on net core instead of in this driver. With this new approach, the driver doesn't have to bother with error handling (allocation failure checking, making sure free happens in the right spot, etc). This is core responsibility now. Remove the allocation in the DSA user network device code and leverage the network core allocation instead. Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Breno Leitao <leitao@debian.org> Link: https://lore.kernel.org/r/20240306200416.2973179-1-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-06 20:04:09 +00:00
user_dev->pcpu_stat_type = NETDEV_PCPU_STAT_TSTATS;
net: dsa: add GRO support via gro_cells gro_cells lib is used by different encapsulating netdevices, such as geneve, macsec, vxlan etc. to speed up decapsulated traffic processing. CPU tag is a sort of "encapsulation", and we can use the same mechs to greatly improve overall DSA performance. skbs are passed to the GRO layer after removing CPU tags, so we don't need any new packet offload types as it was firstly proposed by me in the first GRO-over-DSA variant [1]. The size of struct gro_cells is sizeof(void *), so hot struct dsa_slave_priv becomes only 4/8 bytes bigger, and all critical fields remain in one 32-byte cacheline. The other positive side effect is that drivers for network devices that can be shipped as CPU ports of DSA-driven switches can now use napi_gro_frags() to pass skbs to kernel. Packets built that way are completely non-linear and are likely being dropped without GRO. This was tested on to-be-mainlined-soon Ethernet driver that uses napi_gro_frags(), and the overall performance was on par with the variant from [1], sometimes even better due to minimal overhead. net.core.gro_normal_batch tuning may help to push it to the limit on particular setups and platforms. iperf3 IPoE VLAN NAT TCP forwarding (port1.218 -> port0) setup on 1.2 GHz MIPS board: 5.7-rc2 baseline: [ID] Interval Transfer Bitrate Retr [ 5] 0.00-120.01 sec 9.00 GBytes 644 Mbits/sec 413 sender [ 5] 0.00-120.00 sec 8.99 GBytes 644 Mbits/sec receiver Iface RX packets TX packets eth0 7097731 7097702 port0 426050 6671829 port1 6671681 425862 port1.218 6671677 425851 With this patch: [ID] Interval Transfer Bitrate Retr [ 5] 0.00-120.01 sec 12.2 GBytes 870 Mbits/sec 122 sender [ 5] 0.00-120.00 sec 12.2 GBytes 870 Mbits/sec receiver Iface RX packets TX packets eth0 9474792 9474777 port0 455200 353288 port1 9019592 455035 port1.218 353144 455024 v2: - Add some performance examples in the commit message; - No functional changes. [1] https://lore.kernel.org/netdev/20191230143028.27313-1-alobakin@dlink.ru/ Signed-off-by: Alexander Lobakin <bloodyreaper@yandex.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-21 13:41:08 +00:00
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
ret = gro_cells_init(&p->gcells, user_dev);
net: dsa: add GRO support via gro_cells gro_cells lib is used by different encapsulating netdevices, such as geneve, macsec, vxlan etc. to speed up decapsulated traffic processing. CPU tag is a sort of "encapsulation", and we can use the same mechs to greatly improve overall DSA performance. skbs are passed to the GRO layer after removing CPU tags, so we don't need any new packet offload types as it was firstly proposed by me in the first GRO-over-DSA variant [1]. The size of struct gro_cells is sizeof(void *), so hot struct dsa_slave_priv becomes only 4/8 bytes bigger, and all critical fields remain in one 32-byte cacheline. The other positive side effect is that drivers for network devices that can be shipped as CPU ports of DSA-driven switches can now use napi_gro_frags() to pass skbs to kernel. Packets built that way are completely non-linear and are likely being dropped without GRO. This was tested on to-be-mainlined-soon Ethernet driver that uses napi_gro_frags(), and the overall performance was on par with the variant from [1], sometimes even better due to minimal overhead. net.core.gro_normal_batch tuning may help to push it to the limit on particular setups and platforms. iperf3 IPoE VLAN NAT TCP forwarding (port1.218 -> port0) setup on 1.2 GHz MIPS board: 5.7-rc2 baseline: [ID] Interval Transfer Bitrate Retr [ 5] 0.00-120.01 sec 9.00 GBytes 644 Mbits/sec 413 sender [ 5] 0.00-120.00 sec 8.99 GBytes 644 Mbits/sec receiver Iface RX packets TX packets eth0 7097731 7097702 port0 426050 6671829 port1 6671681 425862 port1.218 6671677 425851 With this patch: [ID] Interval Transfer Bitrate Retr [ 5] 0.00-120.01 sec 12.2 GBytes 870 Mbits/sec 122 sender [ 5] 0.00-120.00 sec 12.2 GBytes 870 Mbits/sec receiver Iface RX packets TX packets eth0 9474792 9474777 port0 455200 353288 port1 9019592 455035 port1.218 353144 455024 v2: - Add some performance examples in the commit message; - No functional changes. [1] https://lore.kernel.org/netdev/20191230143028.27313-1-alobakin@dlink.ru/ Signed-off-by: Alexander Lobakin <bloodyreaper@yandex.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-21 13:41:08 +00:00
if (ret)
goto out_free;
net: dsa: remove useless args of dsa_slave_create dsa_slave_create currently takes 4 arguments while it only needs the related dsa_port and its name. Remove all other arguments. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-05 20:20:19 +00:00
p->dp = port;
net: dsa: Add plumbing for port mirroring Add necessary plumbing at the slave network device level to have switch drivers implement ndo_setup_tc() and most particularly the cls_matchall classifier. We add support for two switch operations: port_add_mirror and port_del_mirror() which configure, on a per-port basis the mirror parameters requested from the cls_matchall classifier. Code is largely borrowed from the Mellanox Spectrum switch driver. Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30 20:41:40 +00:00
INIT_LIST_HEAD(&p->mall_tc_list);
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
port->user = user_dev;
dsa_user_setup_tagger(user_dev);
net: Distributed Switch Architecture protocol support Distributed Switch Architecture is a protocol for managing hardware switch chips. It consists of a set of MII management registers and commands to configure the switch, and an ethernet header format to signal which of the ports of the switch a packet was received from or is intended to be sent to. The switches that this driver supports are typically embedded in access points and routers, and a typical setup with a DSA switch looks something like this: +-----------+ +-----------+ | | RGMII | | | +-------+ +------ 1000baseT MDI ("WAN") | | | 6-port +------ 1000baseT MDI ("LAN1") | CPU | | ethernet +------ 1000baseT MDI ("LAN2") | |MIImgmt| switch +------ 1000baseT MDI ("LAN3") | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4") | | | | +-----------+ +-----------+ The switch driver presents each port on the switch as a separate network interface to Linux, polls the switch to maintain software link state of those ports, forwards MII management interface accesses to those network interfaces (e.g. as done by ethtool) to the switch, and exposes the switch's hardware statistics counters via the appropriate Linux kernel interfaces. This initial patch supports the MII management interface register layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and supports the "Ethertype DSA" packet tagging format. (There is no officially registered ethertype for the Ethertype DSA packet format, so we just grab a random one. The ethertype to use is programmed into the switch, and the switch driver uses the value of ETH_P_EDSA for this, so this define can be changed at any time in the future if the one we chose is allocated to another protocol or if Ethertype DSA gets its own officially registered ethertype, and everything will continue to work.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 13:44:02 +00:00
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
netif_carrier_off(user_dev);
net: Distributed Switch Architecture protocol support Distributed Switch Architecture is a protocol for managing hardware switch chips. It consists of a set of MII management registers and commands to configure the switch, and an ethernet header format to signal which of the ports of the switch a packet was received from or is intended to be sent to. The switches that this driver supports are typically embedded in access points and routers, and a typical setup with a DSA switch looks something like this: +-----------+ +-----------+ | | RGMII | | | +-------+ +------ 1000baseT MDI ("WAN") | | | 6-port +------ 1000baseT MDI ("LAN1") | CPU | | ethernet +------ 1000baseT MDI ("LAN2") | |MIImgmt| switch +------ 1000baseT MDI ("LAN3") | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4") | | | | +-----------+ +-----------+ The switch driver presents each port on the switch as a separate network interface to Linux, polls the switch to maintain software link state of those ports, forwards MII management interface accesses to those network interfaces (e.g. as done by ethtool) to the switch, and exposes the switch's hardware statistics counters via the appropriate Linux kernel interfaces. This initial patch supports the MII management interface register layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and supports the "Ethertype DSA" packet tagging format. (There is no officially registered ethertype for the Ethertype DSA packet format, so we just grab a random one. The ethertype to use is programmed into the switch, and the switch driver uses the value of ETH_P_EDSA for this, so this define can be changed at any time in the future if the one we chose is allocated to another protocol or if Ethertype DSA gets its own officially registered ethertype, and everything will continue to work.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 13:44:02 +00:00
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
ret = dsa_user_phy_setup(user_dev);
dsa: Register netdev before phy When the phy is connected, an info message is printed. If the netdev it is attached to has not been registered yet, the name 'uninitialised' in the output. By registering the netdev first, then connecting they phy, we can avoid this. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06 19:11:20 +00:00
if (ret) {
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
netdev_err(user_dev,
net: dsa: change PHY error message again slave_dev->name is only populated at this stage if it was specified through a label in the device tree. However that is not mandatory. When it isn't, the error message looks like this: [ 5.037057] fsl_enetc 0000:00:00.2 eth2: error -19 setting up slave PHY for eth%d [ 5.044672] fsl_enetc 0000:00:00.2 eth2: error -19 setting up slave PHY for eth%d [ 5.052275] fsl_enetc 0000:00:00.2 eth2: error -19 setting up slave PHY for eth%d [ 5.059877] fsl_enetc 0000:00:00.2 eth2: error -19 setting up slave PHY for eth%d which is especially confusing since the error gets printed on behalf of the DSA master (fsl_enetc in this case). Printing an error message that contains a valid reference to the DSA port's name is difficult at this point in the initialization stage, so at least we should print some info that is more reliable, even if less user-friendly. That may be the driver name and the hardware port index. After this change, the error is printed as: [ 6.051587] mscc_felix 0000:00:00.5: error -19 setting up PHY for tree 0, switch 0, port 0 [ 6.061192] mscc_felix 0000:00:00.5: error -19 setting up PHY for tree 0, switch 0, port 1 [ 6.070765] mscc_felix 0000:00:00.5: error -19 setting up PHY for tree 0, switch 0, port 2 [ 6.080324] mscc_felix 0000:00:00.5: error -19 setting up PHY for tree 0, switch 0, port 3 Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-07 23:06:56 +00:00
"error %d setting up PHY for tree %d, switch %d, port %d\n",
ret, ds->dst->index, ds->index, port->index);
net: dsa: add GRO support via gro_cells gro_cells lib is used by different encapsulating netdevices, such as geneve, macsec, vxlan etc. to speed up decapsulated traffic processing. CPU tag is a sort of "encapsulation", and we can use the same mechs to greatly improve overall DSA performance. skbs are passed to the GRO layer after removing CPU tags, so we don't need any new packet offload types as it was firstly proposed by me in the first GRO-over-DSA variant [1]. The size of struct gro_cells is sizeof(void *), so hot struct dsa_slave_priv becomes only 4/8 bytes bigger, and all critical fields remain in one 32-byte cacheline. The other positive side effect is that drivers for network devices that can be shipped as CPU ports of DSA-driven switches can now use napi_gro_frags() to pass skbs to kernel. Packets built that way are completely non-linear and are likely being dropped without GRO. This was tested on to-be-mainlined-soon Ethernet driver that uses napi_gro_frags(), and the overall performance was on par with the variant from [1], sometimes even better due to minimal overhead. net.core.gro_normal_batch tuning may help to push it to the limit on particular setups and platforms. iperf3 IPoE VLAN NAT TCP forwarding (port1.218 -> port0) setup on 1.2 GHz MIPS board: 5.7-rc2 baseline: [ID] Interval Transfer Bitrate Retr [ 5] 0.00-120.01 sec 9.00 GBytes 644 Mbits/sec 413 sender [ 5] 0.00-120.00 sec 8.99 GBytes 644 Mbits/sec receiver Iface RX packets TX packets eth0 7097731 7097702 port0 426050 6671829 port1 6671681 425862 port1.218 6671677 425851 With this patch: [ID] Interval Transfer Bitrate Retr [ 5] 0.00-120.01 sec 12.2 GBytes 870 Mbits/sec 122 sender [ 5] 0.00-120.00 sec 12.2 GBytes 870 Mbits/sec receiver Iface RX packets TX packets eth0 9474792 9474777 port0 455200 353288 port1 9019592 455035 port1.218 353144 455024 v2: - Add some performance examples in the commit message; - No functional changes. [1] https://lore.kernel.org/netdev/20191230143028.27313-1-alobakin@dlink.ru/ Signed-off-by: Alexander Lobakin <bloodyreaper@yandex.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-21 13:41:08 +00:00
goto out_gcells;
net: dsa: Fix network device registration order We cannot be registering the network device first, then setting its carrier off and finally connecting it to a PHY, doing that leaves a window during which the carrier is at best inconsistent, and at worse the device is not usable without a down/up sequence since the network device is visible to user space with possibly no PHY device attached. Re-order steps so that they make logical sense. This fixes some devices where the port was not usable after e.g: an unbind then bind of the driver. Fixes: 0071f56e46da ("dsa: Register netdev before phy") Fixes: 91da11f870f0 ("net: Distributed Switch Architecture protocol support") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-25 22:55:53 +00:00
}
net: dsa: reorder PHY initialization with MTU setup in slave.c In dsa_slave_create() there are 2 sections that take rtnl_lock(): MTU change and netdev registration. They are separated by PHY initialization. There isn't any strict ordering requirement except for the fact that netdev registration should be last. Therefore, we can perform the MTU change a bit later, after the PHY setup. A future change will then be able to merge the two rtnl_lock sections into one. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-05 23:11:12 +00:00
rtnl_lock();
net: dsa: merge rtnl_lock sections in dsa_slave_create Currently dsa_slave_create() has two sequences of rtnl_lock/rtnl_unlock in a row. Remove the rtnl_unlock() and rtnl_lock() in between, such that the operation can execute slighly faster. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-05 23:11:13 +00:00
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
ret = dsa_user_change_mtu(user_dev, ETH_DATA_LEN);
net: dsa: reorder PHY initialization with MTU setup in slave.c In dsa_slave_create() there are 2 sections that take rtnl_lock(): MTU change and netdev registration. They are separated by PHY initialization. There isn't any strict ordering requirement except for the fact that netdev registration should be last. Therefore, we can perform the MTU change a bit later, after the PHY setup. A future change will then be able to merge the two rtnl_lock sections into one. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-05 23:11:12 +00:00
if (ret && ret != -EOPNOTSUPP)
dev_warn(ds->dev, "nonfatal error %d setting MTU to %d on port %d\n",
ret, ETH_DATA_LEN, port->index);
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
ret = register_netdevice(user_dev);
net: dsa: Fix network device registration order We cannot be registering the network device first, then setting its carrier off and finally connecting it to a PHY, doing that leaves a window during which the carrier is at best inconsistent, and at worse the device is not usable without a down/up sequence since the network device is visible to user space with possibly no PHY device attached. Re-order steps so that they make logical sense. This fixes some devices where the port was not usable after e.g: an unbind then bind of the driver. Fixes: 0071f56e46da ("dsa: Register netdev before phy") Fixes: 91da11f870f0 ("net: Distributed Switch Architecture protocol support") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-25 22:55:53 +00:00
if (ret) {
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
netdev_err(conduit, "error %d registering interface %s\n",
ret, user_dev->name);
net: dsa: link interfaces with the DSA master to get rid of lockdep warnings Since commit 845e0ebb4408 ("net: change addr_list_lock back to static key"), cascaded DSA setups (DSA switch port as DSA master for another DSA switch port) are emitting this lockdep warning: ============================================ WARNING: possible recursive locking detected 5.8.0-rc1-00133-g923e4b5032dd-dirty #208 Not tainted -------------------------------------------- dhcpcd/323 is trying to acquire lock: ffff000066dd4268 (&dsa_master_addr_list_lock_key/1){+...}-{2:2}, at: dev_mc_sync+0x44/0x90 but task is already holding lock: ffff00006608c268 (&dsa_master_addr_list_lock_key/1){+...}-{2:2}, at: dev_mc_sync+0x44/0x90 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&dsa_master_addr_list_lock_key/1); lock(&dsa_master_addr_list_lock_key/1); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by dhcpcd/323: #0: ffffdbd1381dda18 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x24/0x30 #1: ffff00006614b268 (_xmit_ETHER){+...}-{2:2}, at: dev_set_rx_mode+0x28/0x48 #2: ffff00006608c268 (&dsa_master_addr_list_lock_key/1){+...}-{2:2}, at: dev_mc_sync+0x44/0x90 stack backtrace: Call trace: dump_backtrace+0x0/0x1e0 show_stack+0x20/0x30 dump_stack+0xec/0x158 __lock_acquire+0xca0/0x2398 lock_acquire+0xe8/0x440 _raw_spin_lock_nested+0x64/0x90 dev_mc_sync+0x44/0x90 dsa_slave_set_rx_mode+0x34/0x50 __dev_set_rx_mode+0x60/0xa0 dev_mc_sync+0x84/0x90 dsa_slave_set_rx_mode+0x34/0x50 __dev_set_rx_mode+0x60/0xa0 dev_set_rx_mode+0x30/0x48 __dev_open+0x10c/0x180 __dev_change_flags+0x170/0x1c8 dev_change_flags+0x2c/0x70 devinet_ioctl+0x774/0x878 inet_ioctl+0x348/0x3b0 sock_do_ioctl+0x50/0x310 sock_ioctl+0x1f8/0x580 ksys_ioctl+0xb0/0xf0 __arm64_sys_ioctl+0x28/0x38 el0_svc_common.constprop.0+0x7c/0x180 do_el0_svc+0x2c/0x98 el0_sync_handler+0x9c/0x1b8 el0_sync+0x158/0x180 Since DSA never made use of the netdev API for describing links between upper devices and lower devices, the dev->lower_level value of a DSA switch interface would be 1, which would warn when it is a DSA master. We can use netdev_upper_dev_link() to describe the relationship between a DSA slave and a DSA master. To be precise, a DSA "slave" (switch port) is an "upper" to a DSA "master" (host port). The relationship is "many uppers to one lower", like in the case of VLAN. So, for that reason, we use the same function as VLAN uses. There might be a chance that somebody will try to take hold of this interface and use it immediately after register_netdev() and before netdev_upper_dev_link(). To avoid that, we do the registration and linkage while holding the RTNL, and we use the RTNL-locked cousin of register_netdev(), which is register_netdevice(). Since this warning was not there when lockdep was using dynamic keys for addr_list_lock, we are blaming the lockdep patch itself. The network stack _has_ been using static lockdep keys before, and it _is_ likely that stacked DSA setups have been triggering these lockdep warnings since forever, however I can't test very old kernels on this particular stacked DSA setup, to ensure I'm not in fact introducing regressions. Fixes: 845e0ebb4408 ("net: change addr_list_lock back to static key") Suggested-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-07 23:48:42 +00:00
rtnl_unlock();
net: dsa: Fix network device registration order We cannot be registering the network device first, then setting its carrier off and finally connecting it to a PHY, doing that leaves a window during which the carrier is at best inconsistent, and at worse the device is not usable without a down/up sequence since the network device is visible to user space with possibly no PHY device attached. Re-order steps so that they make logical sense. This fixes some devices where the port was not usable after e.g: an unbind then bind of the driver. Fixes: 0071f56e46da ("dsa: Register netdev before phy") Fixes: 91da11f870f0 ("net: Distributed Switch Architecture protocol support") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-25 22:55:53 +00:00
goto out_phy;
dsa: Register netdev before phy When the phy is connected, an info message is printed. If the netdev it is attached to has not been registered yet, the name 'uninitialised' in the output. By registering the netdev first, then connecting they phy, we can avoid this. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06 19:11:20 +00:00
}
net: dsa: report and change port default priority using dcbnl The port-based default QoS class is assigned to packets that lack a VLAN PCP (or the port is configured to not trust the VLAN PCP), an IP DSCP (or the port is configured to not trust IP DSCP), and packets on which no tc-skbedit action has matched. Similar to other drivers, this can be exposed to user space using the DCB Application Priority Table. IEEE 802.1Q-2018 specifies in Table D-8 - Sel field values that when the Selector is 1, the Protocol ID value of 0 denotes the "Default application priority. For use when application priority is not otherwise specified." The way in which the dcbnl integration in DSA has been designed has to do with its requirements. Andrew Lunn explains that SOHO switches are expected to come with some sort of pre-configured QoS profile, and that it is desirable for this to come pre-loaded into the DSA slave interfaces' DCB application priority table. In the dcbnl design, this is possible because calls to dcb_ieee_setapp() can be initiated by anyone including being self-initiated by this device driver. However, what makes this challenging to implement in DSA is that the DSA core manages the net_devices (effectively hiding them from drivers), while drivers manage the hardware. The DSA core has no knowledge of what individual drivers' QoS policies are. DSA could export to drivers a wrapper over dcb_ieee_setapp() and these could call that function to pre-populate the app priority table, however drivers don't have a good moment in time to do this. The dsa_switch_ops :: setup() method gets called before the net_devices are created (dsa_slave_create), and so is dsa_switch_ops :: port_setup(). What remains is dsa_switch_ops :: port_enable(), but this gets called upon each ndo_open. If we add app table entries on every open, we'd need to remove them on close, to avoid duplicate entry errors. But if we delete app priority entries on close, what we delete may not be the initial, driver pre-populated entries, but rather user-added entries. So it is clear that letting drivers choose the timing of the dcb_ieee_setapp() call is inappropriate. The alternative which was chosen is to introduce hardware-specific ops in dsa_switch_ops, and effectively hide dcbnl details from drivers as well. For pre-populating the application table, dsa_slave_dcbnl_init() will call ds->ops->port_get_default_prio() which is supposed to read from hardware. If the operation succeeds, DSA creates a default-prio app table entry. The method is called as soon as the slave_dev is registered, but before we release the rtnl_mutex. This is done such that user space sees the app table entries as soon as it sees the interface being registered. The fact that we populate slave_dev->dcbnl_ops with a non-NULL pointer changes behavior in dcb_doit() from net/dcb/dcbnl.c, which used to return -EOPNOTSUPP for any dcbnl operation where netdev->dcbnl_ops is NULL. Because there are still dcbnl-unaware DSA drivers even if they have dcbnl_ops populated, the way to restore the behavior is to make all dcbnl_ops return -EOPNOTSUPP on absence of the hardware-specific dsa_switch_ops method. The dcbnl framework absurdly allows there to be more than one app table entry for the same selector and protocol (in other words, more than one port-based default priority). In the iproute2 dcb program, there is a "replace" syntactical sugar command which performs an "add" and a "del" to hide this away. But we choose the largest configured priority when we call ds->ops->port_set_default_prio(), using __fls(). When there is no default-prio app table entry left, the port-default priority is restored to 0. Link: https://patchwork.kernel.org/project/netdevbpf/patch/20210113154139.1803705-2-olteanv@gmail.com/ Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-11 21:15:18 +00:00
if (IS_ENABLED(CONFIG_DCB)) {
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
ret = dsa_user_dcbnl_init(user_dev);
net: dsa: report and change port default priority using dcbnl The port-based default QoS class is assigned to packets that lack a VLAN PCP (or the port is configured to not trust the VLAN PCP), an IP DSCP (or the port is configured to not trust IP DSCP), and packets on which no tc-skbedit action has matched. Similar to other drivers, this can be exposed to user space using the DCB Application Priority Table. IEEE 802.1Q-2018 specifies in Table D-8 - Sel field values that when the Selector is 1, the Protocol ID value of 0 denotes the "Default application priority. For use when application priority is not otherwise specified." The way in which the dcbnl integration in DSA has been designed has to do with its requirements. Andrew Lunn explains that SOHO switches are expected to come with some sort of pre-configured QoS profile, and that it is desirable for this to come pre-loaded into the DSA slave interfaces' DCB application priority table. In the dcbnl design, this is possible because calls to dcb_ieee_setapp() can be initiated by anyone including being self-initiated by this device driver. However, what makes this challenging to implement in DSA is that the DSA core manages the net_devices (effectively hiding them from drivers), while drivers manage the hardware. The DSA core has no knowledge of what individual drivers' QoS policies are. DSA could export to drivers a wrapper over dcb_ieee_setapp() and these could call that function to pre-populate the app priority table, however drivers don't have a good moment in time to do this. The dsa_switch_ops :: setup() method gets called before the net_devices are created (dsa_slave_create), and so is dsa_switch_ops :: port_setup(). What remains is dsa_switch_ops :: port_enable(), but this gets called upon each ndo_open. If we add app table entries on every open, we'd need to remove them on close, to avoid duplicate entry errors. But if we delete app priority entries on close, what we delete may not be the initial, driver pre-populated entries, but rather user-added entries. So it is clear that letting drivers choose the timing of the dcb_ieee_setapp() call is inappropriate. The alternative which was chosen is to introduce hardware-specific ops in dsa_switch_ops, and effectively hide dcbnl details from drivers as well. For pre-populating the application table, dsa_slave_dcbnl_init() will call ds->ops->port_get_default_prio() which is supposed to read from hardware. If the operation succeeds, DSA creates a default-prio app table entry. The method is called as soon as the slave_dev is registered, but before we release the rtnl_mutex. This is done such that user space sees the app table entries as soon as it sees the interface being registered. The fact that we populate slave_dev->dcbnl_ops with a non-NULL pointer changes behavior in dcb_doit() from net/dcb/dcbnl.c, which used to return -EOPNOTSUPP for any dcbnl operation where netdev->dcbnl_ops is NULL. Because there are still dcbnl-unaware DSA drivers even if they have dcbnl_ops populated, the way to restore the behavior is to make all dcbnl_ops return -EOPNOTSUPP on absence of the hardware-specific dsa_switch_ops method. The dcbnl framework absurdly allows there to be more than one app table entry for the same selector and protocol (in other words, more than one port-based default priority). In the iproute2 dcb program, there is a "replace" syntactical sugar command which performs an "add" and a "del" to hide this away. But we choose the largest configured priority when we call ds->ops->port_set_default_prio(), using __fls(). When there is no default-prio app table entry left, the port-default priority is restored to 0. Link: https://patchwork.kernel.org/project/netdevbpf/patch/20210113154139.1803705-2-olteanv@gmail.com/ Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-11 21:15:18 +00:00
if (ret) {
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
netdev_err(user_dev,
net: dsa: report and change port default priority using dcbnl The port-based default QoS class is assigned to packets that lack a VLAN PCP (or the port is configured to not trust the VLAN PCP), an IP DSCP (or the port is configured to not trust IP DSCP), and packets on which no tc-skbedit action has matched. Similar to other drivers, this can be exposed to user space using the DCB Application Priority Table. IEEE 802.1Q-2018 specifies in Table D-8 - Sel field values that when the Selector is 1, the Protocol ID value of 0 denotes the "Default application priority. For use when application priority is not otherwise specified." The way in which the dcbnl integration in DSA has been designed has to do with its requirements. Andrew Lunn explains that SOHO switches are expected to come with some sort of pre-configured QoS profile, and that it is desirable for this to come pre-loaded into the DSA slave interfaces' DCB application priority table. In the dcbnl design, this is possible because calls to dcb_ieee_setapp() can be initiated by anyone including being self-initiated by this device driver. However, what makes this challenging to implement in DSA is that the DSA core manages the net_devices (effectively hiding them from drivers), while drivers manage the hardware. The DSA core has no knowledge of what individual drivers' QoS policies are. DSA could export to drivers a wrapper over dcb_ieee_setapp() and these could call that function to pre-populate the app priority table, however drivers don't have a good moment in time to do this. The dsa_switch_ops :: setup() method gets called before the net_devices are created (dsa_slave_create), and so is dsa_switch_ops :: port_setup(). What remains is dsa_switch_ops :: port_enable(), but this gets called upon each ndo_open. If we add app table entries on every open, we'd need to remove them on close, to avoid duplicate entry errors. But if we delete app priority entries on close, what we delete may not be the initial, driver pre-populated entries, but rather user-added entries. So it is clear that letting drivers choose the timing of the dcb_ieee_setapp() call is inappropriate. The alternative which was chosen is to introduce hardware-specific ops in dsa_switch_ops, and effectively hide dcbnl details from drivers as well. For pre-populating the application table, dsa_slave_dcbnl_init() will call ds->ops->port_get_default_prio() which is supposed to read from hardware. If the operation succeeds, DSA creates a default-prio app table entry. The method is called as soon as the slave_dev is registered, but before we release the rtnl_mutex. This is done such that user space sees the app table entries as soon as it sees the interface being registered. The fact that we populate slave_dev->dcbnl_ops with a non-NULL pointer changes behavior in dcb_doit() from net/dcb/dcbnl.c, which used to return -EOPNOTSUPP for any dcbnl operation where netdev->dcbnl_ops is NULL. Because there are still dcbnl-unaware DSA drivers even if they have dcbnl_ops populated, the way to restore the behavior is to make all dcbnl_ops return -EOPNOTSUPP on absence of the hardware-specific dsa_switch_ops method. The dcbnl framework absurdly allows there to be more than one app table entry for the same selector and protocol (in other words, more than one port-based default priority). In the iproute2 dcb program, there is a "replace" syntactical sugar command which performs an "add" and a "del" to hide this away. But we choose the largest configured priority when we call ds->ops->port_set_default_prio(), using __fls(). When there is no default-prio app table entry left, the port-default priority is restored to 0. Link: https://patchwork.kernel.org/project/netdevbpf/patch/20210113154139.1803705-2-olteanv@gmail.com/ Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-11 21:15:18 +00:00
"failed to initialize DCB: %pe\n",
ERR_PTR(ret));
rtnl_unlock();
goto out_unregister;
}
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
ret = netdev_upper_dev_link(conduit, user_dev, NULL);
net: dsa: link interfaces with the DSA master to get rid of lockdep warnings Since commit 845e0ebb4408 ("net: change addr_list_lock back to static key"), cascaded DSA setups (DSA switch port as DSA master for another DSA switch port) are emitting this lockdep warning: ============================================ WARNING: possible recursive locking detected 5.8.0-rc1-00133-g923e4b5032dd-dirty #208 Not tainted -------------------------------------------- dhcpcd/323 is trying to acquire lock: ffff000066dd4268 (&dsa_master_addr_list_lock_key/1){+...}-{2:2}, at: dev_mc_sync+0x44/0x90 but task is already holding lock: ffff00006608c268 (&dsa_master_addr_list_lock_key/1){+...}-{2:2}, at: dev_mc_sync+0x44/0x90 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&dsa_master_addr_list_lock_key/1); lock(&dsa_master_addr_list_lock_key/1); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by dhcpcd/323: #0: ffffdbd1381dda18 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x24/0x30 #1: ffff00006614b268 (_xmit_ETHER){+...}-{2:2}, at: dev_set_rx_mode+0x28/0x48 #2: ffff00006608c268 (&dsa_master_addr_list_lock_key/1){+...}-{2:2}, at: dev_mc_sync+0x44/0x90 stack backtrace: Call trace: dump_backtrace+0x0/0x1e0 show_stack+0x20/0x30 dump_stack+0xec/0x158 __lock_acquire+0xca0/0x2398 lock_acquire+0xe8/0x440 _raw_spin_lock_nested+0x64/0x90 dev_mc_sync+0x44/0x90 dsa_slave_set_rx_mode+0x34/0x50 __dev_set_rx_mode+0x60/0xa0 dev_mc_sync+0x84/0x90 dsa_slave_set_rx_mode+0x34/0x50 __dev_set_rx_mode+0x60/0xa0 dev_set_rx_mode+0x30/0x48 __dev_open+0x10c/0x180 __dev_change_flags+0x170/0x1c8 dev_change_flags+0x2c/0x70 devinet_ioctl+0x774/0x878 inet_ioctl+0x348/0x3b0 sock_do_ioctl+0x50/0x310 sock_ioctl+0x1f8/0x580 ksys_ioctl+0xb0/0xf0 __arm64_sys_ioctl+0x28/0x38 el0_svc_common.constprop.0+0x7c/0x180 do_el0_svc+0x2c/0x98 el0_sync_handler+0x9c/0x1b8 el0_sync+0x158/0x180 Since DSA never made use of the netdev API for describing links between upper devices and lower devices, the dev->lower_level value of a DSA switch interface would be 1, which would warn when it is a DSA master. We can use netdev_upper_dev_link() to describe the relationship between a DSA slave and a DSA master. To be precise, a DSA "slave" (switch port) is an "upper" to a DSA "master" (host port). The relationship is "many uppers to one lower", like in the case of VLAN. So, for that reason, we use the same function as VLAN uses. There might be a chance that somebody will try to take hold of this interface and use it immediately after register_netdev() and before netdev_upper_dev_link(). To avoid that, we do the registration and linkage while holding the RTNL, and we use the RTNL-locked cousin of register_netdev(), which is register_netdevice(). Since this warning was not there when lockdep was using dynamic keys for addr_list_lock, we are blaming the lockdep patch itself. The network stack _has_ been using static lockdep keys before, and it _is_ likely that stacked DSA setups have been triggering these lockdep warnings since forever, however I can't test very old kernels on this particular stacked DSA setup, to ensure I'm not in fact introducing regressions. Fixes: 845e0ebb4408 ("net: change addr_list_lock back to static key") Suggested-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-07 23:48:42 +00:00
rtnl_unlock();
if (ret)
goto out_unregister;
net: dsa: Ensure that port array elements are initialized before being used A network device notifier can be called for one or more of the created slave devices before all slave devices have been registered. This can result in a mismatch between ds->phys_port_mask and the registered devices by the time the call is made, and it can result in a slave device being added to a bridge before its entry in ds->ports[] has been initialized. Rework the initialization code to initialize entries in ds->ports[] in dsa_slave_create. With this change, dsa_slave_create no longer needs to return slave_dev but can return an error code instead. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-24 21:15:32 +00:00
return 0;
net: dsa: Fix network device registration order We cannot be registering the network device first, then setting its carrier off and finally connecting it to a PHY, doing that leaves a window during which the carrier is at best inconsistent, and at worse the device is not usable without a down/up sequence since the network device is visible to user space with possibly no PHY device attached. Re-order steps so that they make logical sense. This fixes some devices where the port was not usable after e.g: an unbind then bind of the driver. Fixes: 0071f56e46da ("dsa: Register netdev before phy") Fixes: 91da11f870f0 ("net: Distributed Switch Architecture protocol support") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-25 22:55:53 +00:00
net: dsa: link interfaces with the DSA master to get rid of lockdep warnings Since commit 845e0ebb4408 ("net: change addr_list_lock back to static key"), cascaded DSA setups (DSA switch port as DSA master for another DSA switch port) are emitting this lockdep warning: ============================================ WARNING: possible recursive locking detected 5.8.0-rc1-00133-g923e4b5032dd-dirty #208 Not tainted -------------------------------------------- dhcpcd/323 is trying to acquire lock: ffff000066dd4268 (&dsa_master_addr_list_lock_key/1){+...}-{2:2}, at: dev_mc_sync+0x44/0x90 but task is already holding lock: ffff00006608c268 (&dsa_master_addr_list_lock_key/1){+...}-{2:2}, at: dev_mc_sync+0x44/0x90 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&dsa_master_addr_list_lock_key/1); lock(&dsa_master_addr_list_lock_key/1); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by dhcpcd/323: #0: ffffdbd1381dda18 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x24/0x30 #1: ffff00006614b268 (_xmit_ETHER){+...}-{2:2}, at: dev_set_rx_mode+0x28/0x48 #2: ffff00006608c268 (&dsa_master_addr_list_lock_key/1){+...}-{2:2}, at: dev_mc_sync+0x44/0x90 stack backtrace: Call trace: dump_backtrace+0x0/0x1e0 show_stack+0x20/0x30 dump_stack+0xec/0x158 __lock_acquire+0xca0/0x2398 lock_acquire+0xe8/0x440 _raw_spin_lock_nested+0x64/0x90 dev_mc_sync+0x44/0x90 dsa_slave_set_rx_mode+0x34/0x50 __dev_set_rx_mode+0x60/0xa0 dev_mc_sync+0x84/0x90 dsa_slave_set_rx_mode+0x34/0x50 __dev_set_rx_mode+0x60/0xa0 dev_set_rx_mode+0x30/0x48 __dev_open+0x10c/0x180 __dev_change_flags+0x170/0x1c8 dev_change_flags+0x2c/0x70 devinet_ioctl+0x774/0x878 inet_ioctl+0x348/0x3b0 sock_do_ioctl+0x50/0x310 sock_ioctl+0x1f8/0x580 ksys_ioctl+0xb0/0xf0 __arm64_sys_ioctl+0x28/0x38 el0_svc_common.constprop.0+0x7c/0x180 do_el0_svc+0x2c/0x98 el0_sync_handler+0x9c/0x1b8 el0_sync+0x158/0x180 Since DSA never made use of the netdev API for describing links between upper devices and lower devices, the dev->lower_level value of a DSA switch interface would be 1, which would warn when it is a DSA master. We can use netdev_upper_dev_link() to describe the relationship between a DSA slave and a DSA master. To be precise, a DSA "slave" (switch port) is an "upper" to a DSA "master" (host port). The relationship is "many uppers to one lower", like in the case of VLAN. So, for that reason, we use the same function as VLAN uses. There might be a chance that somebody will try to take hold of this interface and use it immediately after register_netdev() and before netdev_upper_dev_link(). To avoid that, we do the registration and linkage while holding the RTNL, and we use the RTNL-locked cousin of register_netdev(), which is register_netdevice(). Since this warning was not there when lockdep was using dynamic keys for addr_list_lock, we are blaming the lockdep patch itself. The network stack _has_ been using static lockdep keys before, and it _is_ likely that stacked DSA setups have been triggering these lockdep warnings since forever, however I can't test very old kernels on this particular stacked DSA setup, to ensure I'm not in fact introducing regressions. Fixes: 845e0ebb4408 ("net: change addr_list_lock back to static key") Suggested-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-07 23:48:42 +00:00
out_unregister:
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
unregister_netdev(user_dev);
net: dsa: Fix network device registration order We cannot be registering the network device first, then setting its carrier off and finally connecting it to a PHY, doing that leaves a window during which the carrier is at best inconsistent, and at worse the device is not usable without a down/up sequence since the network device is visible to user space with possibly no PHY device attached. Re-order steps so that they make logical sense. This fixes some devices where the port was not usable after e.g: an unbind then bind of the driver. Fixes: 0071f56e46da ("dsa: Register netdev before phy") Fixes: 91da11f870f0 ("net: Distributed Switch Architecture protocol support") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-25 22:55:53 +00:00
out_phy:
net: dsa: Plug in PHYLINK support Add support for PHYLINK within the DSA subsystem in order to support more complex devices such as pluggable (SFP) and non-pluggable (SFF) modules, 10G PHYs, and traditional PHYs. Using PHYLINK allows us to drop some amount of complexity we had while probing fixed and non-fixed PHYs using Device Tree. Because PHYLINK separates the Ethernet MAC/port configuration into different stages, we let switch drivers implement those, and for now, we maintain functionality by calling dsa_slave_adjust_link() during phylink_mac_link_{up,down} which provides semantically equivalent steps. Drivers willing to take advantage of PHYLINK should implement the phylink_mac_* operations that DSA wraps. We cannot quite remove the adjust_link() callback just yet, because a number of drivers rely on that for configuring their "CPU" and "DSA" ports, this is done dsa_port_setup_phy_of() and dsa_port_fixed_link_register_of() still. Drivers that utilize fixed links for user-facing ports (e.g: bcm_sf2) will need to implement phylink_mac_ops from now on to preserve functionality, since PHYLINK *does not* create a phy_device instance for fixed links. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 20:17:36 +00:00
rtnl_lock();
phylink_disconnect_phy(p->dp->pl);
rtnl_unlock();
net: dsa: don't leave dangling pointers in dp->pl when failing There is a desire to simplify the dsa_port registration path with devlink, and this involves reworking a bit how user ports which fail to connect to their PHY (because it's missing) get reinitialized as UNUSED devlink ports. The desire is for the change to look something like this; basically dsa_port_setup() has failed, we just change dp->type and call dsa_port_setup() again. -/* Destroy the current devlink port, and create a new one which has the UNUSED - * flavour. - */ -static int dsa_port_reinit_as_unused(struct dsa_port *dp) +static int dsa_port_setup_as_unused(struct dsa_port *dp) { - dsa_port_devlink_teardown(dp); dp->type = DSA_PORT_TYPE_UNUSED; - return dsa_port_devlink_setup(dp); + return dsa_port_setup(dp); } For an UNUSED port, dsa_port_setup() mostly only calls dsa_port_devlink_setup() anyway, so we could get away with calling just that. But if we call the full blown dsa_port_setup(dp) (which will be needed to properly set dp->setup = true), the callee will have the tendency to go through this code block too, and call dsa_port_disable(dp): switch (dp->type) { case DSA_PORT_TYPE_UNUSED: dsa_port_disable(dp); break; That is not very good, because dsa_port_disable() has this hidden inside of it: if (dp->pl) phylink_stop(dp->pl); Fact is, we are not prepared to handle a call to dsa_port_disable() with a struct dsa_port that came from a previous (and failed) call to dsa_port_setup(). We do not clean up dp->pl, and this will make the second call to dsa_port_setup() call phylink_stop() on a dangling dp->pl pointer. Solve this by creating an API for phylink destruction which is symmetric to the phylink creation, and never leave dp->pl set to anything except NULL or a valid phylink structure. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-29 07:29:00 +00:00
dsa_port_phylink_destroy(p->dp);
net: dsa: add GRO support via gro_cells gro_cells lib is used by different encapsulating netdevices, such as geneve, macsec, vxlan etc. to speed up decapsulated traffic processing. CPU tag is a sort of "encapsulation", and we can use the same mechs to greatly improve overall DSA performance. skbs are passed to the GRO layer after removing CPU tags, so we don't need any new packet offload types as it was firstly proposed by me in the first GRO-over-DSA variant [1]. The size of struct gro_cells is sizeof(void *), so hot struct dsa_slave_priv becomes only 4/8 bytes bigger, and all critical fields remain in one 32-byte cacheline. The other positive side effect is that drivers for network devices that can be shipped as CPU ports of DSA-driven switches can now use napi_gro_frags() to pass skbs to kernel. Packets built that way are completely non-linear and are likely being dropped without GRO. This was tested on to-be-mainlined-soon Ethernet driver that uses napi_gro_frags(), and the overall performance was on par with the variant from [1], sometimes even better due to minimal overhead. net.core.gro_normal_batch tuning may help to push it to the limit on particular setups and platforms. iperf3 IPoE VLAN NAT TCP forwarding (port1.218 -> port0) setup on 1.2 GHz MIPS board: 5.7-rc2 baseline: [ID] Interval Transfer Bitrate Retr [ 5] 0.00-120.01 sec 9.00 GBytes 644 Mbits/sec 413 sender [ 5] 0.00-120.00 sec 8.99 GBytes 644 Mbits/sec receiver Iface RX packets TX packets eth0 7097731 7097702 port0 426050 6671829 port1 6671681 425862 port1.218 6671677 425851 With this patch: [ID] Interval Transfer Bitrate Retr [ 5] 0.00-120.01 sec 12.2 GBytes 870 Mbits/sec 122 sender [ 5] 0.00-120.00 sec 12.2 GBytes 870 Mbits/sec receiver Iface RX packets TX packets eth0 9474792 9474777 port0 455200 353288 port1 9019592 455035 port1.218 353144 455024 v2: - Add some performance examples in the commit message; - No functional changes. [1] https://lore.kernel.org/netdev/20191230143028.27313-1-alobakin@dlink.ru/ Signed-off-by: Alexander Lobakin <bloodyreaper@yandex.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-21 13:41:08 +00:00
out_gcells:
gro_cells_destroy(&p->gcells);
net: dsa: Fix network device registration order We cannot be registering the network device first, then setting its carrier off and finally connecting it to a PHY, doing that leaves a window during which the carrier is at best inconsistent, and at worse the device is not usable without a down/up sequence since the network device is visible to user space with possibly no PHY device attached. Re-order steps so that they make logical sense. This fixes some devices where the port was not usable after e.g: an unbind then bind of the driver. Fixes: 0071f56e46da ("dsa: Register netdev before phy") Fixes: 91da11f870f0 ("net: Distributed Switch Architecture protocol support") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-25 22:55:53 +00:00
out_free:
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
free_netdev(user_dev);
port->user = NULL;
net: dsa: Fix network device registration order We cannot be registering the network device first, then setting its carrier off and finally connecting it to a PHY, doing that leaves a window during which the carrier is at best inconsistent, and at worse the device is not usable without a down/up sequence since the network device is visible to user space with possibly no PHY device attached. Re-order steps so that they make logical sense. This fixes some devices where the port was not usable after e.g: an unbind then bind of the driver. Fixes: 0071f56e46da ("dsa: Register netdev before phy") Fixes: 91da11f870f0 ("net: Distributed Switch Architecture protocol support") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-25 22:55:53 +00:00
return ret;
net: Distributed Switch Architecture protocol support Distributed Switch Architecture is a protocol for managing hardware switch chips. It consists of a set of MII management registers and commands to configure the switch, and an ethernet header format to signal which of the ports of the switch a packet was received from or is intended to be sent to. The switches that this driver supports are typically embedded in access points and routers, and a typical setup with a DSA switch looks something like this: +-----------+ +-----------+ | | RGMII | | | +-------+ +------ 1000baseT MDI ("WAN") | | | 6-port +------ 1000baseT MDI ("LAN1") | CPU | | ethernet +------ 1000baseT MDI ("LAN2") | |MIImgmt| switch +------ 1000baseT MDI ("LAN3") | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4") | | | | +-----------+ +-----------+ The switch driver presents each port on the switch as a separate network interface to Linux, polls the switch to maintain software link state of those ports, forwards MII management interface accesses to those network interfaces (e.g. as done by ethtool) to the switch, and exposes the switch's hardware statistics counters via the appropriate Linux kernel interfaces. This initial patch supports the MII management interface register layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and supports the "Ethertype DSA" packet tagging format. (There is no officially registered ethertype for the Ethertype DSA packet format, so we just grab a random one. The ethertype to use is programmed into the switch, and the switch driver uses the value of ETH_P_EDSA for this, so this define can be changed at any time in the future if the one we chose is allocated to another protocol or if Ethertype DSA gets its own officially registered ethertype, and everything will continue to work.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 13:44:02 +00:00
}
net: dsa: integrate with SWITCHDEV for HW bridging In order to support bridging offloads in DSA switch drivers, select NET_SWITCHDEV to get access to the port_stp_update and parent_get_id NDOs that we are required to implement. To facilitate the integratation at the DSA driver level, we implement 3 types of operations: - port_join_bridge - port_leave_bridge - port_stp_update DSA will resolve which switch ports that are currently bridge port members as some Switch hardware/drivers need to know about that to limit the register programming to just the relevant registers (especially for slow MDIO buses). We also take care of setting the correct STP state when slave network devices are brought up/down while being bridge members. Finally, when a port is leaving the bridge, we make sure we set in BR_STATE_FORWARDING state, otherwise the bridge layer would leave it disabled as a result of having left the bridge. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-24 21:15:33 +00:00
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
void dsa_user_destroy(struct net_device *user_dev)
net: dsa: move dsa slave destroy code to slave.c Move dsa slave dedicated code from dsa_switch_destroy to a new dsa_slave_destroy function in slave.c. Add the netif_carrier_off and phy_disconnect calls in order to correctly cleanup the netdev state and PHY state machine. Signed-off-by: Frode Isaksen <fisaksen@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-07 12:57:35 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct net_device *conduit = dsa_user_to_conduit(user_dev);
struct dsa_port *dp = dsa_user_to_port(user_dev);
struct dsa_user_priv *p = netdev_priv(user_dev);
net: dsa: move dsa slave destroy code to slave.c Move dsa slave dedicated code from dsa_switch_destroy to a new dsa_slave_destroy function in slave.c. Add the netif_carrier_off and phy_disconnect calls in order to correctly cleanup the netdev state and PHY state machine. Signed-off-by: Frode Isaksen <fisaksen@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-07 12:57:35 +00:00
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
netif_carrier_off(user_dev);
net: dsa: Plug in PHYLINK support Add support for PHYLINK within the DSA subsystem in order to support more complex devices such as pluggable (SFP) and non-pluggable (SFF) modules, 10G PHYs, and traditional PHYs. Using PHYLINK allows us to drop some amount of complexity we had while probing fixed and non-fixed PHYs using Device Tree. Because PHYLINK separates the Ethernet MAC/port configuration into different stages, we let switch drivers implement those, and for now, we maintain functionality by calling dsa_slave_adjust_link() during phylink_mac_link_{up,down} which provides semantically equivalent steps. Drivers willing to take advantage of PHYLINK should implement the phylink_mac_* operations that DSA wraps. We cannot quite remove the adjust_link() callback just yet, because a number of drivers rely on that for configuring their "CPU" and "DSA" ports, this is done dsa_port_setup_phy_of() and dsa_port_fixed_link_register_of() still. Drivers that utilize fixed links for user-facing ports (e.g: bcm_sf2) will need to implement phylink_mac_ops from now on to preserve functionality, since PHYLINK *does not* create a phy_device instance for fixed links. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 20:17:36 +00:00
rtnl_lock();
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
netdev_upper_dev_unlink(conduit, user_dev);
unregister_netdevice(user_dev);
net: dsa: Plug in PHYLINK support Add support for PHYLINK within the DSA subsystem in order to support more complex devices such as pluggable (SFP) and non-pluggable (SFF) modules, 10G PHYs, and traditional PHYs. Using PHYLINK allows us to drop some amount of complexity we had while probing fixed and non-fixed PHYs using Device Tree. Because PHYLINK separates the Ethernet MAC/port configuration into different stages, we let switch drivers implement those, and for now, we maintain functionality by calling dsa_slave_adjust_link() during phylink_mac_link_{up,down} which provides semantically equivalent steps. Drivers willing to take advantage of PHYLINK should implement the phylink_mac_* operations that DSA wraps. We cannot quite remove the adjust_link() callback just yet, because a number of drivers rely on that for configuring their "CPU" and "DSA" ports, this is done dsa_port_setup_phy_of() and dsa_port_fixed_link_register_of() still. Drivers that utilize fixed links for user-facing ports (e.g: bcm_sf2) will need to implement phylink_mac_ops from now on to preserve functionality, since PHYLINK *does not* create a phy_device instance for fixed links. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 20:17:36 +00:00
phylink_disconnect_phy(dp->pl);
rtnl_unlock();
net: dsa: slave: fix fixed-link phydev leaks Make sure to deregister and free any fixed-link PHY registered using of_phy_register_fixed_link() on slave-setup errors and on slave destroy. Fixes: 0d8bcdd383b8 ("net: dsa: allow for more complex PHY setups") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-28 18:25:09 +00:00
net: dsa: don't leave dangling pointers in dp->pl when failing There is a desire to simplify the dsa_port registration path with devlink, and this involves reworking a bit how user ports which fail to connect to their PHY (because it's missing) get reinitialized as UNUSED devlink ports. The desire is for the change to look something like this; basically dsa_port_setup() has failed, we just change dp->type and call dsa_port_setup() again. -/* Destroy the current devlink port, and create a new one which has the UNUSED - * flavour. - */ -static int dsa_port_reinit_as_unused(struct dsa_port *dp) +static int dsa_port_setup_as_unused(struct dsa_port *dp) { - dsa_port_devlink_teardown(dp); dp->type = DSA_PORT_TYPE_UNUSED; - return dsa_port_devlink_setup(dp); + return dsa_port_setup(dp); } For an UNUSED port, dsa_port_setup() mostly only calls dsa_port_devlink_setup() anyway, so we could get away with calling just that. But if we call the full blown dsa_port_setup(dp) (which will be needed to properly set dp->setup = true), the callee will have the tendency to go through this code block too, and call dsa_port_disable(dp): switch (dp->type) { case DSA_PORT_TYPE_UNUSED: dsa_port_disable(dp); break; That is not very good, because dsa_port_disable() has this hidden inside of it: if (dp->pl) phylink_stop(dp->pl); Fact is, we are not prepared to handle a call to dsa_port_disable() with a struct dsa_port that came from a previous (and failed) call to dsa_port_setup(). We do not clean up dp->pl, and this will make the second call to dsa_port_setup() call phylink_stop() on a dangling dp->pl pointer. Solve this by creating an API for phylink destruction which is symmetric to the phylink creation, and never leave dp->pl set to anything except NULL or a valid phylink structure. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-29 07:29:00 +00:00
dsa_port_phylink_destroy(dp);
net: dsa: add GRO support via gro_cells gro_cells lib is used by different encapsulating netdevices, such as geneve, macsec, vxlan etc. to speed up decapsulated traffic processing. CPU tag is a sort of "encapsulation", and we can use the same mechs to greatly improve overall DSA performance. skbs are passed to the GRO layer after removing CPU tags, so we don't need any new packet offload types as it was firstly proposed by me in the first GRO-over-DSA variant [1]. The size of struct gro_cells is sizeof(void *), so hot struct dsa_slave_priv becomes only 4/8 bytes bigger, and all critical fields remain in one 32-byte cacheline. The other positive side effect is that drivers for network devices that can be shipped as CPU ports of DSA-driven switches can now use napi_gro_frags() to pass skbs to kernel. Packets built that way are completely non-linear and are likely being dropped without GRO. This was tested on to-be-mainlined-soon Ethernet driver that uses napi_gro_frags(), and the overall performance was on par with the variant from [1], sometimes even better due to minimal overhead. net.core.gro_normal_batch tuning may help to push it to the limit on particular setups and platforms. iperf3 IPoE VLAN NAT TCP forwarding (port1.218 -> port0) setup on 1.2 GHz MIPS board: 5.7-rc2 baseline: [ID] Interval Transfer Bitrate Retr [ 5] 0.00-120.01 sec 9.00 GBytes 644 Mbits/sec 413 sender [ 5] 0.00-120.00 sec 8.99 GBytes 644 Mbits/sec receiver Iface RX packets TX packets eth0 7097731 7097702 port0 426050 6671829 port1 6671681 425862 port1.218 6671677 425851 With this patch: [ID] Interval Transfer Bitrate Retr [ 5] 0.00-120.01 sec 12.2 GBytes 870 Mbits/sec 122 sender [ 5] 0.00-120.00 sec 12.2 GBytes 870 Mbits/sec receiver Iface RX packets TX packets eth0 9474792 9474777 port0 455200 353288 port1 9019592 455035 port1.218 353144 455024 v2: - Add some performance examples in the commit message; - No functional changes. [1] https://lore.kernel.org/netdev/20191230143028.27313-1-alobakin@dlink.ru/ Signed-off-by: Alexander Lobakin <bloodyreaper@yandex.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-21 13:41:08 +00:00
gro_cells_destroy(&p->gcells);
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
free_netdev(user_dev);
net: dsa: move dsa slave destroy code to slave.c Move dsa slave dedicated code from dsa_switch_destroy to a new dsa_slave_destroy function in slave.c. Add the netif_carrier_off and phy_disconnect calls in order to correctly cleanup the netdev state and PHY state machine. Signed-off-by: Frode Isaksen <fisaksen@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-07 12:57:35 +00:00
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
int dsa_user_change_conduit(struct net_device *dev, struct net_device *conduit,
net: dsa: allow the DSA master to be seen and changed through rtnetlink Some DSA switches have multiple CPU ports, which can be used to improve CPU termination throughput, but DSA, through dsa_tree_setup_cpu_ports(), sets up only the first one, leading to suboptimal use of hardware. The desire is to not change the default configuration but to permit the user to create a dynamic mapping between individual user ports and the CPU port that they are served by, configurable through rtnetlink. It is also intended to permit load balancing between CPU ports, and in that case, the foreseen model is for the DSA master to be a bonding interface whose lowers are the physical DSA masters. To that end, we create a struct rtnl_link_ops for DSA user ports with the "dsa" kind. We expose the IFLA_DSA_MASTER link attribute that contains the ifindex of the newly desired DSA master. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:06:59 +00:00
struct netlink_ext_ack *extack)
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct net_device *old_conduit = dsa_user_to_conduit(dev);
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: allow the DSA master to be seen and changed through rtnetlink Some DSA switches have multiple CPU ports, which can be used to improve CPU termination throughput, but DSA, through dsa_tree_setup_cpu_ports(), sets up only the first one, leading to suboptimal use of hardware. The desire is to not change the default configuration but to permit the user to create a dynamic mapping between individual user ports and the CPU port that they are served by, configurable through rtnetlink. It is also intended to permit load balancing between CPU ports, and in that case, the foreseen model is for the DSA master to be a bonding interface whose lowers are the physical DSA masters. To that end, we create a struct rtnl_link_ops for DSA user ports with the "dsa" kind. We expose the IFLA_DSA_MASTER link attribute that contains the ifindex of the newly desired DSA master. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:06:59 +00:00
struct dsa_switch *ds = dp->ds;
struct net_device *upper;
struct list_head *iter;
int err;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
if (conduit == old_conduit)
net: dsa: allow the DSA master to be seen and changed through rtnetlink Some DSA switches have multiple CPU ports, which can be used to improve CPU termination throughput, but DSA, through dsa_tree_setup_cpu_ports(), sets up only the first one, leading to suboptimal use of hardware. The desire is to not change the default configuration but to permit the user to create a dynamic mapping between individual user ports and the CPU port that they are served by, configurable through rtnetlink. It is also intended to permit load balancing between CPU ports, and in that case, the foreseen model is for the DSA master to be a bonding interface whose lowers are the physical DSA masters. To that end, we create a struct rtnl_link_ops for DSA user ports with the "dsa" kind. We expose the IFLA_DSA_MASTER link attribute that contains the ifindex of the newly desired DSA master. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:06:59 +00:00
return 0;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
if (!ds->ops->port_change_conduit) {
net: dsa: allow the DSA master to be seen and changed through rtnetlink Some DSA switches have multiple CPU ports, which can be used to improve CPU termination throughput, but DSA, through dsa_tree_setup_cpu_ports(), sets up only the first one, leading to suboptimal use of hardware. The desire is to not change the default configuration but to permit the user to create a dynamic mapping between individual user ports and the CPU port that they are served by, configurable through rtnetlink. It is also intended to permit load balancing between CPU ports, and in that case, the foreseen model is for the DSA master to be a bonding interface whose lowers are the physical DSA masters. To that end, we create a struct rtnl_link_ops for DSA user ports with the "dsa" kind. We expose the IFLA_DSA_MASTER link attribute that contains the ifindex of the newly desired DSA master. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:06:59 +00:00
NL_SET_ERR_MSG_MOD(extack,
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
"Driver does not support changing DSA conduit");
net: dsa: allow the DSA master to be seen and changed through rtnetlink Some DSA switches have multiple CPU ports, which can be used to improve CPU termination throughput, but DSA, through dsa_tree_setup_cpu_ports(), sets up only the first one, leading to suboptimal use of hardware. The desire is to not change the default configuration but to permit the user to create a dynamic mapping between individual user ports and the CPU port that they are served by, configurable through rtnetlink. It is also intended to permit load balancing between CPU ports, and in that case, the foreseen model is for the DSA master to be a bonding interface whose lowers are the physical DSA masters. To that end, we create a struct rtnl_link_ops for DSA user ports with the "dsa" kind. We expose the IFLA_DSA_MASTER link attribute that contains the ifindex of the newly desired DSA master. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:06:59 +00:00
return -EOPNOTSUPP;
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
if (!netdev_uses_dsa(conduit)) {
net: dsa: allow the DSA master to be seen and changed through rtnetlink Some DSA switches have multiple CPU ports, which can be used to improve CPU termination throughput, but DSA, through dsa_tree_setup_cpu_ports(), sets up only the first one, leading to suboptimal use of hardware. The desire is to not change the default configuration but to permit the user to create a dynamic mapping between individual user ports and the CPU port that they are served by, configurable through rtnetlink. It is also intended to permit load balancing between CPU ports, and in that case, the foreseen model is for the DSA master to be a bonding interface whose lowers are the physical DSA masters. To that end, we create a struct rtnl_link_ops for DSA user ports with the "dsa" kind. We expose the IFLA_DSA_MASTER link attribute that contains the ifindex of the newly desired DSA master. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:06:59 +00:00
NL_SET_ERR_MSG_MOD(extack,
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
"Interface not eligible as DSA conduit");
net: dsa: allow the DSA master to be seen and changed through rtnetlink Some DSA switches have multiple CPU ports, which can be used to improve CPU termination throughput, but DSA, through dsa_tree_setup_cpu_ports(), sets up only the first one, leading to suboptimal use of hardware. The desire is to not change the default configuration but to permit the user to create a dynamic mapping between individual user ports and the CPU port that they are served by, configurable through rtnetlink. It is also intended to permit load balancing between CPU ports, and in that case, the foreseen model is for the DSA master to be a bonding interface whose lowers are the physical DSA masters. To that end, we create a struct rtnl_link_ops for DSA user ports with the "dsa" kind. We expose the IFLA_DSA_MASTER link attribute that contains the ifindex of the newly desired DSA master. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:06:59 +00:00
return -EOPNOTSUPP;
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
netdev_for_each_upper_dev_rcu(conduit, upper, iter) {
if (dsa_user_dev_check(upper))
net: dsa: allow the DSA master to be seen and changed through rtnetlink Some DSA switches have multiple CPU ports, which can be used to improve CPU termination throughput, but DSA, through dsa_tree_setup_cpu_ports(), sets up only the first one, leading to suboptimal use of hardware. The desire is to not change the default configuration but to permit the user to create a dynamic mapping between individual user ports and the CPU port that they are served by, configurable through rtnetlink. It is also intended to permit load balancing between CPU ports, and in that case, the foreseen model is for the DSA master to be a bonding interface whose lowers are the physical DSA masters. To that end, we create a struct rtnl_link_ops for DSA user ports with the "dsa" kind. We expose the IFLA_DSA_MASTER link attribute that contains the ifindex of the newly desired DSA master. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:06:59 +00:00
continue;
if (netif_is_bridge_master(upper))
continue;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
NL_SET_ERR_MSG_MOD(extack, "Cannot join conduit with unknown uppers");
net: dsa: allow the DSA master to be seen and changed through rtnetlink Some DSA switches have multiple CPU ports, which can be used to improve CPU termination throughput, but DSA, through dsa_tree_setup_cpu_ports(), sets up only the first one, leading to suboptimal use of hardware. The desire is to not change the default configuration but to permit the user to create a dynamic mapping between individual user ports and the CPU port that they are served by, configurable through rtnetlink. It is also intended to permit load balancing between CPU ports, and in that case, the foreseen model is for the DSA master to be a bonding interface whose lowers are the physical DSA masters. To that end, we create a struct rtnl_link_ops for DSA user ports with the "dsa" kind. We expose the IFLA_DSA_MASTER link attribute that contains the ifindex of the newly desired DSA master. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:06:59 +00:00
return -EOPNOTSUPP;
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
/* Since we allow live-changing the DSA conduit, plus we auto-open the
* DSA conduit when the user port opens => we need to ensure that the
* new DSA conduit is open too.
net: dsa: allow the DSA master to be seen and changed through rtnetlink Some DSA switches have multiple CPU ports, which can be used to improve CPU termination throughput, but DSA, through dsa_tree_setup_cpu_ports(), sets up only the first one, leading to suboptimal use of hardware. The desire is to not change the default configuration but to permit the user to create a dynamic mapping between individual user ports and the CPU port that they are served by, configurable through rtnetlink. It is also intended to permit load balancing between CPU ports, and in that case, the foreseen model is for the DSA master to be a bonding interface whose lowers are the physical DSA masters. To that end, we create a struct rtnl_link_ops for DSA user ports with the "dsa" kind. We expose the IFLA_DSA_MASTER link attribute that contains the ifindex of the newly desired DSA master. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:06:59 +00:00
*/
if (dev->flags & IFF_UP) {
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
err = dev_open(conduit, extack);
net: dsa: allow the DSA master to be seen and changed through rtnetlink Some DSA switches have multiple CPU ports, which can be used to improve CPU termination throughput, but DSA, through dsa_tree_setup_cpu_ports(), sets up only the first one, leading to suboptimal use of hardware. The desire is to not change the default configuration but to permit the user to create a dynamic mapping between individual user ports and the CPU port that they are served by, configurable through rtnetlink. It is also intended to permit load balancing between CPU ports, and in that case, the foreseen model is for the DSA master to be a bonding interface whose lowers are the physical DSA masters. To that end, we create a struct rtnl_link_ops for DSA user ports with the "dsa" kind. We expose the IFLA_DSA_MASTER link attribute that contains the ifindex of the newly desired DSA master. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:06:59 +00:00
if (err)
return err;
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
netdev_upper_dev_unlink(old_conduit, dev);
net: dsa: allow the DSA master to be seen and changed through rtnetlink Some DSA switches have multiple CPU ports, which can be used to improve CPU termination throughput, but DSA, through dsa_tree_setup_cpu_ports(), sets up only the first one, leading to suboptimal use of hardware. The desire is to not change the default configuration but to permit the user to create a dynamic mapping between individual user ports and the CPU port that they are served by, configurable through rtnetlink. It is also intended to permit load balancing between CPU ports, and in that case, the foreseen model is for the DSA master to be a bonding interface whose lowers are the physical DSA masters. To that end, we create a struct rtnl_link_ops for DSA user ports with the "dsa" kind. We expose the IFLA_DSA_MASTER link attribute that contains the ifindex of the newly desired DSA master. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:06:59 +00:00
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
err = netdev_upper_dev_link(conduit, dev, extack);
net: dsa: allow the DSA master to be seen and changed through rtnetlink Some DSA switches have multiple CPU ports, which can be used to improve CPU termination throughput, but DSA, through dsa_tree_setup_cpu_ports(), sets up only the first one, leading to suboptimal use of hardware. The desire is to not change the default configuration but to permit the user to create a dynamic mapping between individual user ports and the CPU port that they are served by, configurable through rtnetlink. It is also intended to permit load balancing between CPU ports, and in that case, the foreseen model is for the DSA master to be a bonding interface whose lowers are the physical DSA masters. To that end, we create a struct rtnl_link_ops for DSA user ports with the "dsa" kind. We expose the IFLA_DSA_MASTER link attribute that contains the ifindex of the newly desired DSA master. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:06:59 +00:00
if (err)
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
goto out_revert_old_conduit_unlink;
net: dsa: allow the DSA master to be seen and changed through rtnetlink Some DSA switches have multiple CPU ports, which can be used to improve CPU termination throughput, but DSA, through dsa_tree_setup_cpu_ports(), sets up only the first one, leading to suboptimal use of hardware. The desire is to not change the default configuration but to permit the user to create a dynamic mapping between individual user ports and the CPU port that they are served by, configurable through rtnetlink. It is also intended to permit load balancing between CPU ports, and in that case, the foreseen model is for the DSA master to be a bonding interface whose lowers are the physical DSA masters. To that end, we create a struct rtnl_link_ops for DSA user ports with the "dsa" kind. We expose the IFLA_DSA_MASTER link attribute that contains the ifindex of the newly desired DSA master. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:06:59 +00:00
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
err = dsa_port_change_conduit(dp, conduit, extack);
net: dsa: allow the DSA master to be seen and changed through rtnetlink Some DSA switches have multiple CPU ports, which can be used to improve CPU termination throughput, but DSA, through dsa_tree_setup_cpu_ports(), sets up only the first one, leading to suboptimal use of hardware. The desire is to not change the default configuration but to permit the user to create a dynamic mapping between individual user ports and the CPU port that they are served by, configurable through rtnetlink. It is also intended to permit load balancing between CPU ports, and in that case, the foreseen model is for the DSA master to be a bonding interface whose lowers are the physical DSA masters. To that end, we create a struct rtnl_link_ops for DSA user ports with the "dsa" kind. We expose the IFLA_DSA_MASTER link attribute that contains the ifindex of the newly desired DSA master. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:06:59 +00:00
if (err)
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
goto out_revert_conduit_link;
net: dsa: allow the DSA master to be seen and changed through rtnetlink Some DSA switches have multiple CPU ports, which can be used to improve CPU termination throughput, but DSA, through dsa_tree_setup_cpu_ports(), sets up only the first one, leading to suboptimal use of hardware. The desire is to not change the default configuration but to permit the user to create a dynamic mapping between individual user ports and the CPU port that they are served by, configurable through rtnetlink. It is also intended to permit load balancing between CPU ports, and in that case, the foreseen model is for the DSA master to be a bonding interface whose lowers are the physical DSA masters. To that end, we create a struct rtnl_link_ops for DSA user ports with the "dsa" kind. We expose the IFLA_DSA_MASTER link attribute that contains the ifindex of the newly desired DSA master. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:06:59 +00:00
/* Update the MTU of the new CPU port through cross-chip notifiers */
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
err = dsa_user_change_mtu(dev, dev->mtu);
net: dsa: allow the DSA master to be seen and changed through rtnetlink Some DSA switches have multiple CPU ports, which can be used to improve CPU termination throughput, but DSA, through dsa_tree_setup_cpu_ports(), sets up only the first one, leading to suboptimal use of hardware. The desire is to not change the default configuration but to permit the user to create a dynamic mapping between individual user ports and the CPU port that they are served by, configurable through rtnetlink. It is also intended to permit load balancing between CPU ports, and in that case, the foreseen model is for the DSA master to be a bonding interface whose lowers are the physical DSA masters. To that end, we create a struct rtnl_link_ops for DSA user ports with the "dsa" kind. We expose the IFLA_DSA_MASTER link attribute that contains the ifindex of the newly desired DSA master. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:06:59 +00:00
if (err && err != -EOPNOTSUPP) {
netdev_warn(dev,
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
"nonfatal error updating MTU with new conduit: %pe\n",
net: dsa: allow the DSA master to be seen and changed through rtnetlink Some DSA switches have multiple CPU ports, which can be used to improve CPU termination throughput, but DSA, through dsa_tree_setup_cpu_ports(), sets up only the first one, leading to suboptimal use of hardware. The desire is to not change the default configuration but to permit the user to create a dynamic mapping between individual user ports and the CPU port that they are served by, configurable through rtnetlink. It is also intended to permit load balancing between CPU ports, and in that case, the foreseen model is for the DSA master to be a bonding interface whose lowers are the physical DSA masters. To that end, we create a struct rtnl_link_ops for DSA user ports with the "dsa" kind. We expose the IFLA_DSA_MASTER link attribute that contains the ifindex of the newly desired DSA master. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:06:59 +00:00
ERR_PTR(err));
}
/* If the port doesn't have its own MAC address and relies on the DSA
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
* conduit's one, inherit it again from the new DSA conduit.
net: dsa: allow the DSA master to be seen and changed through rtnetlink Some DSA switches have multiple CPU ports, which can be used to improve CPU termination throughput, but DSA, through dsa_tree_setup_cpu_ports(), sets up only the first one, leading to suboptimal use of hardware. The desire is to not change the default configuration but to permit the user to create a dynamic mapping between individual user ports and the CPU port that they are served by, configurable through rtnetlink. It is also intended to permit load balancing between CPU ports, and in that case, the foreseen model is for the DSA master to be a bonding interface whose lowers are the physical DSA masters. To that end, we create a struct rtnl_link_ops for DSA user ports with the "dsa" kind. We expose the IFLA_DSA_MASTER link attribute that contains the ifindex of the newly desired DSA master. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:06:59 +00:00
*/
if (is_zero_ether_addr(dp->mac))
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
eth_hw_addr_inherit(dev, conduit);
net: dsa: allow the DSA master to be seen and changed through rtnetlink Some DSA switches have multiple CPU ports, which can be used to improve CPU termination throughput, but DSA, through dsa_tree_setup_cpu_ports(), sets up only the first one, leading to suboptimal use of hardware. The desire is to not change the default configuration but to permit the user to create a dynamic mapping between individual user ports and the CPU port that they are served by, configurable through rtnetlink. It is also intended to permit load balancing between CPU ports, and in that case, the foreseen model is for the DSA master to be a bonding interface whose lowers are the physical DSA masters. To that end, we create a struct rtnl_link_ops for DSA user ports with the "dsa" kind. We expose the IFLA_DSA_MASTER link attribute that contains the ifindex of the newly desired DSA master. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:06:59 +00:00
return 0;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
out_revert_conduit_link:
netdev_upper_dev_unlink(conduit, dev);
out_revert_old_conduit_unlink:
netdev_upper_dev_link(old_conduit, dev, NULL);
net: dsa: allow the DSA master to be seen and changed through rtnetlink Some DSA switches have multiple CPU ports, which can be used to improve CPU termination throughput, but DSA, through dsa_tree_setup_cpu_ports(), sets up only the first one, leading to suboptimal use of hardware. The desire is to not change the default configuration but to permit the user to create a dynamic mapping between individual user ports and the CPU port that they are served by, configurable through rtnetlink. It is also intended to permit load balancing between CPU ports, and in that case, the foreseen model is for the DSA master to be a bonding interface whose lowers are the physical DSA masters. To that end, we create a struct rtnl_link_ops for DSA user ports with the "dsa" kind. We expose the IFLA_DSA_MASTER link attribute that contains the ifindex of the newly desired DSA master. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:06:59 +00:00
return err;
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
bool dsa_user_dev_check(const struct net_device *dev)
net: dsa: integrate with SWITCHDEV for HW bridging In order to support bridging offloads in DSA switch drivers, select NET_SWITCHDEV to get access to the port_stp_update and parent_get_id NDOs that we are required to implement. To facilitate the integratation at the DSA driver level, we implement 3 types of operations: - port_join_bridge - port_leave_bridge - port_stp_update DSA will resolve which switch ports that are currently bridge port members as some Switch hardware/drivers need to know about that to limit the register programming to just the relevant registers (especially for slow MDIO buses). We also take care of setting the correct STP state when slave network devices are brought up/down while being bridge members. Finally, when a port is leaving the bridge, we make sure we set in BR_STATE_FORWARDING state, otherwise the bridge layer would leave it disabled as a result of having left the bridge. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-24 21:15:33 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
return dev->netdev_ops == &dsa_user_netdev_ops;
net: dsa: integrate with SWITCHDEV for HW bridging In order to support bridging offloads in DSA switch drivers, select NET_SWITCHDEV to get access to the port_stp_update and parent_get_id NDOs that we are required to implement. To facilitate the integratation at the DSA driver level, we implement 3 types of operations: - port_join_bridge - port_leave_bridge - port_stp_update DSA will resolve which switch ports that are currently bridge port members as some Switch hardware/drivers need to know about that to limit the register programming to just the relevant registers (especially for slow MDIO buses). We also take care of setting the correct STP state when slave network devices are brought up/down while being bridge members. Finally, when a port is leaving the bridge, we make sure we set in BR_STATE_FORWARDING state, otherwise the bridge layer would leave it disabled as a result of having left the bridge. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-24 21:15:33 +00:00
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
EXPORT_SYMBOL_GPL(dsa_user_dev_check);
net: dsa: integrate with SWITCHDEV for HW bridging In order to support bridging offloads in DSA switch drivers, select NET_SWITCHDEV to get access to the port_stp_update and parent_get_id NDOs that we are required to implement. To facilitate the integratation at the DSA driver level, we implement 3 types of operations: - port_join_bridge - port_leave_bridge - port_stp_update DSA will resolve which switch ports that are currently bridge port members as some Switch hardware/drivers need to know about that to limit the register programming to just the relevant registers (especially for slow MDIO buses). We also take care of setting the correct STP state when slave network devices are brought up/down while being bridge members. Finally, when a port is leaving the bridge, we make sure we set in BR_STATE_FORWARDING state, otherwise the bridge layer would leave it disabled as a result of having left the bridge. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-24 21:15:33 +00:00
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_changeupper(struct net_device *dev,
struct netdev_notifier_changeupper_info *info)
net: dsa: integrate with SWITCHDEV for HW bridging In order to support bridging offloads in DSA switch drivers, select NET_SWITCHDEV to get access to the port_stp_update and parent_get_id NDOs that we are required to implement. To facilitate the integratation at the DSA driver level, we implement 3 types of operations: - port_join_bridge - port_leave_bridge - port_stp_update DSA will resolve which switch ports that are currently bridge port members as some Switch hardware/drivers need to know about that to limit the register programming to just the relevant registers (especially for slow MDIO buses). We also take care of setting the correct STP state when slave network devices are brought up/down while being bridge members. Finally, when a port is leaving the bridge, we make sure we set in BR_STATE_FORWARDING state, otherwise the bridge layer would leave it disabled as a result of having left the bridge. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-24 21:15:33 +00:00
{
net: dsa: pass extack to dsa_port_{bridge,lag}_join This is a pretty noisy change that was broken out of the larger change for replaying switchdev attributes and objects at bridge join time, which is when these extack objects are actually used. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-22 23:51:48 +00:00
struct netlink_ext_ack *extack;
net: dsa: simplify netdevice events handling Simplify the code handling the slave netdevice notifier call by providing a dsa_slave_changeupper helper for NETDEV_CHANGEUPPER, and so on (only this event is supported at the moment.) Return NOTIFY_DONE when we did not care about an event, and NOTIFY_OK when we were concerned but no error occurred, as the API suggests. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03 18:20:17 +00:00
int err = NOTIFY_DONE;
net: dsa: fix netdev_priv() dereference before check on non-DSA netdevice events After the blamed commit, we started doing this dereference for every NETDEV_CHANGEUPPER and NETDEV_PRECHANGEUPPER event in the system. static inline struct dsa_port *dsa_user_to_port(const struct net_device *dev) { struct dsa_user_priv *p = netdev_priv(dev); return p->dp; } Which is obviously bogus, because not all net_devices have a netdev_priv() of type struct dsa_user_priv. But struct dsa_user_priv is fairly small, and p->dp means dereferencing 8 bytes starting with offset 16. Most drivers allocate that much private memory anyway, making our access not fault, and we discard the bogus data quickly afterwards, so this wasn't caught. But the dummy interface is somewhat special in that it calls alloc_netdev() with a priv size of 0. So every netdev_priv() dereference is invalid, and we get this when we emit a NETDEV_PRECHANGEUPPER event with a VLAN as its new upper: $ ip link add dummy1 type dummy $ ip link add link dummy1 name dummy1.100 type vlan id 100 [ 43.309174] ================================================================== [ 43.316456] BUG: KASAN: slab-out-of-bounds in dsa_user_prechangeupper+0x30/0xe8 [ 43.323835] Read of size 8 at addr ffff3f86481d2990 by task ip/374 [ 43.330058] [ 43.342436] Call trace: [ 43.366542] dsa_user_prechangeupper+0x30/0xe8 [ 43.371024] dsa_user_netdevice_event+0xb38/0xee8 [ 43.375768] notifier_call_chain+0xa4/0x210 [ 43.379985] raw_notifier_call_chain+0x24/0x38 [ 43.384464] __netdev_upper_dev_link+0x3ec/0x5d8 [ 43.389120] netdev_upper_dev_link+0x70/0xa8 [ 43.393424] register_vlan_dev+0x1bc/0x310 [ 43.397554] vlan_newlink+0x210/0x248 [ 43.401247] rtnl_newlink+0x9fc/0xe30 [ 43.404942] rtnetlink_rcv_msg+0x378/0x580 Avoid the kernel oops by dereferencing after the type check, as customary. Fixes: 4c3f80d22b2e ("net: dsa: walk through all changeupper notifier functions") Reported-and-tested-by: syzbot+d81bcd883824180500c8@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/0000000000001d4255060e87545c@google.com/ Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240110003354.2796778-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-10 00:33:54 +00:00
struct dsa_port *dp;
net: dsa: integrate with SWITCHDEV for HW bridging In order to support bridging offloads in DSA switch drivers, select NET_SWITCHDEV to get access to the port_stp_update and parent_get_id NDOs that we are required to implement. To facilitate the integratation at the DSA driver level, we implement 3 types of operations: - port_join_bridge - port_leave_bridge - port_stp_update DSA will resolve which switch ports that are currently bridge port members as some Switch hardware/drivers need to know about that to limit the register programming to just the relevant registers (especially for slow MDIO buses). We also take care of setting the correct STP state when slave network devices are brought up/down while being bridge members. Finally, when a port is leaving the bridge, we make sure we set in BR_STATE_FORWARDING state, otherwise the bridge layer would leave it disabled as a result of having left the bridge. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-24 21:15:33 +00:00
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
if (!dsa_user_dev_check(dev))
net: dsa: walk through all changeupper notifier functions Traditionally, DSA has had a single netdev notifier handling function for each device type. For the sake of code cleanliness, we would like to introduce more handling functions which do one thing, but the conditions for entering these functions start to overlap. Example: a handling function which tracks whether any bridges contain both DSA and non-DSA interfaces. Either this is placed before dsa_slave_changeupper(), case in which it will prevent that function from executing, or we place it after dsa_slave_changeupper(), case in which we will prevent it from executing. The other alternative is to ignore errors from the new handling function (not ideal). To support this usage, we need to change the pattern. In the new model, we enter all notifier handling sub-functions, and exit with NOTIFY_DONE if there is nothing to do. This allows the sub-functions to be relatively free-form and independent from each other. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-19 17:48:12 +00:00
return err;
net: dsa: fix netdev_priv() dereference before check on non-DSA netdevice events After the blamed commit, we started doing this dereference for every NETDEV_CHANGEUPPER and NETDEV_PRECHANGEUPPER event in the system. static inline struct dsa_port *dsa_user_to_port(const struct net_device *dev) { struct dsa_user_priv *p = netdev_priv(dev); return p->dp; } Which is obviously bogus, because not all net_devices have a netdev_priv() of type struct dsa_user_priv. But struct dsa_user_priv is fairly small, and p->dp means dereferencing 8 bytes starting with offset 16. Most drivers allocate that much private memory anyway, making our access not fault, and we discard the bogus data quickly afterwards, so this wasn't caught. But the dummy interface is somewhat special in that it calls alloc_netdev() with a priv size of 0. So every netdev_priv() dereference is invalid, and we get this when we emit a NETDEV_PRECHANGEUPPER event with a VLAN as its new upper: $ ip link add dummy1 type dummy $ ip link add link dummy1 name dummy1.100 type vlan id 100 [ 43.309174] ================================================================== [ 43.316456] BUG: KASAN: slab-out-of-bounds in dsa_user_prechangeupper+0x30/0xe8 [ 43.323835] Read of size 8 at addr ffff3f86481d2990 by task ip/374 [ 43.330058] [ 43.342436] Call trace: [ 43.366542] dsa_user_prechangeupper+0x30/0xe8 [ 43.371024] dsa_user_netdevice_event+0xb38/0xee8 [ 43.375768] notifier_call_chain+0xa4/0x210 [ 43.379985] raw_notifier_call_chain+0x24/0x38 [ 43.384464] __netdev_upper_dev_link+0x3ec/0x5d8 [ 43.389120] netdev_upper_dev_link+0x70/0xa8 [ 43.393424] register_vlan_dev+0x1bc/0x310 [ 43.397554] vlan_newlink+0x210/0x248 [ 43.401247] rtnl_newlink+0x9fc/0xe30 [ 43.404942] rtnetlink_rcv_msg+0x378/0x580 Avoid the kernel oops by dereferencing after the type check, as customary. Fixes: 4c3f80d22b2e ("net: dsa: walk through all changeupper notifier functions") Reported-and-tested-by: syzbot+d81bcd883824180500c8@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/0000000000001d4255060e87545c@google.com/ Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240110003354.2796778-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-10 00:33:54 +00:00
dp = dsa_user_to_port(dev);
net: dsa: pass extack to dsa_port_{bridge,lag}_join This is a pretty noisy change that was broken out of the larger change for replaying switchdev attributes and objects at bridge join time, which is when these extack objects are actually used. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-22 23:51:48 +00:00
extack = netdev_notifier_info_to_extack(&info->info);
net: dsa: simplify netdevice events handling Simplify the code handling the slave netdevice notifier call by providing a dsa_slave_changeupper helper for NETDEV_CHANGEUPPER, and so on (only this event is supported at the moment.) Return NOTIFY_DONE when we did not care about an event, and NOTIFY_OK when we were concerned but no error occurred, as the API suggests. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03 18:20:17 +00:00
if (netif_is_bridge_master(info->upper_dev)) {
if (info->linking) {
net: dsa: pass extack to dsa_port_{bridge,lag}_join This is a pretty noisy change that was broken out of the larger change for replaying switchdev attributes and objects at bridge join time, which is when these extack objects are actually used. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-22 23:51:48 +00:00
err = dsa_port_bridge_join(dp, info->upper_dev, extack);
net: dsa: implement auto-normalization of MTU for bridge hardware datapath Many switches don't have an explicit knob for configuring the MTU (maximum transmission unit per interface). Instead, they do the length-based packet admission checks on the ingress interface, for reasons that are easy to understand (why would you accept a packet in the queuing subsystem if you know you're going to drop it anyway). So it is actually the MRU that these switches permit configuring. In Linux there only exists the IFLA_MTU netlink attribute and the associated dev_set_mtu function. The comments like to play blind and say that it's changing the "maximum transfer unit", which is to say that there isn't any directionality in the meaning of the MTU word. So that is the interpretation that this patch is giving to things: MTU == MRU. When 2 interfaces having different MTUs are bridged, the bridge driver MTU auto-adjustment logic kicks in: what br_mtu_auto_adjust() does is it adjusts the MTU of the bridge net device itself (and not that of the slave net devices) to the minimum value of all slave interfaces, in order for forwarded packets to not exceed the MTU regardless of the interface they are received and send on. The idea behind this behavior, and why the slave MTUs are not adjusted, is that normal termination from Linux over the L2 forwarding domain should happen over the bridge net device, which _is_ properly limited by the minimum MTU. And termination over individual slave devices is possible even if those are bridged. But that is not "forwarding", so there's no reason to do normalization there, since only a single interface sees that packet. The problem with those switches that can only control the MRU is with the offloaded data path, where a packet received on an interface with MRU 9000 would still be forwarded to an interface with MRU 1500. And the br_mtu_auto_adjust() function does not really help, since the MTU configured on the bridge net device is ignored. In order to enforce the de-facto MTU == MRU rule for these switches, we need to do MTU normalization, which means: in order for no packet larger than the MTU configured on this port to be sent, then we need to limit the MRU on all ports that this packet could possibly come from. AKA since we are configuring the MRU via MTU, it means that all ports within a bridge forwarding domain should have the same MTU. And that is exactly what this patch is trying to do. >From an implementation perspective, we try to follow the intent of the user, otherwise there is a risk that we might livelock them (they try to change the MTU on an already-bridged interface, but we just keep changing it back in an attempt to keep the MTU normalized). So the MTU that the bridge is normalized to is either: - The most recently changed one: ip link set dev swp0 master br0 ip link set dev swp1 master br0 ip link set dev swp0 mtu 1400 This sequence will make swp1 inherit MTU 1400 from swp0. - The one of the most recently added interface to the bridge: ip link set dev swp0 master br0 ip link set dev swp1 mtu 1400 ip link set dev swp1 master br0 The above sequence will make swp0 inherit MTU 1400 as well. Suggested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27 19:55:43 +00:00
if (!err)
dsa_bridge_mtu_normalization(dp);
net: dsa: properly fall back to software bridging If the driver does not implement .port_bridge_{join,leave}, then we must fall back to standalone operation on that port, and trigger the error path of dsa_port_bridge_join. This sets dp->bridge_dev = NULL. In turn, having a non-NULL dp->bridge_dev when there is no offloading support makes the following things go wrong: - dsa_default_offload_fwd_mark make the wrong decision in setting skb->offload_fwd_mark. It should set skb->offload_fwd_mark = 0 for ports that don't offload the bridge, which should instruct the bridge to forward in software. But this does not happen, dp->bridge_dev is incorrectly set to point to the bridge, so the bridge is told that packets have been forwarded in hardware, which they haven't. - switchdev objects (MDBs, VLANs) should not be offloaded by ports that don't offload the bridge. Standalone ports should behave as packet-in, packet-out and the bridge should not be able to manipulate the pvid of the port, or tag stripping on egress, or ingress filtering. This should already work fine because dsa_slave_port_obj_add has: case SWITCHDEV_OBJ_ID_PORT_VLAN: if (!dsa_port_offloads_bridge_port(dp, obj->orig_dev)) return -EOPNOTSUPP; err = dsa_slave_vlan_add(dev, obj, extack); but since dsa_port_offloads_bridge_port works based on dp->bridge_dev, this is again sabotaging us. All the above work in case the port has an unoffloaded LAG interface, so this is well exercised code, we should apply it for plain unoffloaded bridge ports too. Reported-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-23 21:22:56 +00:00
if (err == -EOPNOTSUPP) {
net: dsa: use NL_SET_ERR_MSG_WEAK_MOD() more consistently Now that commit 028fb19c6ba7 ("netlink: provide an ability to set default extack message") provides a weak function that doesn't override an existing extack message provided by the driver, it makes sense to use it also for LAG and HSR offloading, not just for bridge offloading. Also consistently put the message string on a separate line, to reduce line length from 92 to 84 characters. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230202140354.3158129-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-02 14:03:54 +00:00
NL_SET_ERR_MSG_WEAK_MOD(extack,
"Offloading not supported");
net: dsa: properly fall back to software bridging If the driver does not implement .port_bridge_{join,leave}, then we must fall back to standalone operation on that port, and trigger the error path of dsa_port_bridge_join. This sets dp->bridge_dev = NULL. In turn, having a non-NULL dp->bridge_dev when there is no offloading support makes the following things go wrong: - dsa_default_offload_fwd_mark make the wrong decision in setting skb->offload_fwd_mark. It should set skb->offload_fwd_mark = 0 for ports that don't offload the bridge, which should instruct the bridge to forward in software. But this does not happen, dp->bridge_dev is incorrectly set to point to the bridge, so the bridge is told that packets have been forwarded in hardware, which they haven't. - switchdev objects (MDBs, VLANs) should not be offloaded by ports that don't offload the bridge. Standalone ports should behave as packet-in, packet-out and the bridge should not be able to manipulate the pvid of the port, or tag stripping on egress, or ingress filtering. This should already work fine because dsa_slave_port_obj_add has: case SWITCHDEV_OBJ_ID_PORT_VLAN: if (!dsa_port_offloads_bridge_port(dp, obj->orig_dev)) return -EOPNOTSUPP; err = dsa_slave_vlan_add(dev, obj, extack); but since dsa_port_offloads_bridge_port works based on dp->bridge_dev, this is again sabotaging us. All the above work in case the port has an unoffloaded LAG interface, so this is well exercised code, we should apply it for plain unoffloaded bridge ports too. Reported-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-23 21:22:56 +00:00
err = 0;
}
net: dsa: simplify netdevice events handling Simplify the code handling the slave netdevice notifier call by providing a dsa_slave_changeupper helper for NETDEV_CHANGEUPPER, and so on (only this event is supported at the moment.) Return NOTIFY_DONE when we did not care about an event, and NOTIFY_OK when we were concerned but no error occurred, as the API suggests. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03 18:20:17 +00:00
err = notifier_from_errno(err);
} else {
net: dsa: change scope of bridging code Now that the bridge join and leave functions only deal with a DSA port, change their scope from the DSA slave net_device to the DSA generic dsa_port. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:38 +00:00
dsa_port_bridge_leave(dp, info->upper_dev);
net: dsa: simplify netdevice events handling Simplify the code handling the slave netdevice notifier call by providing a dsa_slave_changeupper helper for NETDEV_CHANGEUPPER, and so on (only this event is supported at the moment.) Return NOTIFY_DONE when we did not care about an event, and NOTIFY_OK when we were concerned but no error occurred, as the API suggests. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03 18:20:17 +00:00
err = NOTIFY_OK;
net: dsa: refine netdev event notifier Rework the netdev event handler, similar to what the Mellanox Spectrum driver does, to easily welcome more events later (for example NETDEV_PRECHANGEUPPER) and use netdev helpers (such as netif_is_bridge_master). Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-13 20:21:34 +00:00
}
net: dsa: Link aggregation support Monitor the following events and notify the driver when: - A DSA port joins/leaves a LAG. - A LAG, made up of DSA ports, joins/leaves a bridge. - A DSA port in a LAG is enabled/disabled (enabled meaning "distributing" in 802.3ad LACP terms). When a LAG joins a bridge, the DSA subsystem will treat that as each individual port joining the bridge. The driver may look at the port's LAG device pointer to see if it is associated with any LAG, if that is required. This is analogue to how switchdev events are replicated out to all lower devices when reaching e.g. a LAG. Drivers can optionally request that DSA maintain a linear mapping from a LAG ID to the corresponding netdev by setting ds->num_lag_ids to the desired size. In the event that the hardware is not capable of offloading a particular LAG for any reason (the typical case being use of exotic modes like broadcast), DSA will take a hands-off approach, allowing the LAG to be formed as a pure software construct. This is reported back through the extended ACK, but is otherwise transparent to the user. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-13 08:42:53 +00:00
} else if (netif_is_lag_master(info->upper_dev)) {
if (info->linking) {
err = dsa_port_lag_join(dp, info->upper_dev,
net: dsa: pass extack to dsa_port_{bridge,lag}_join This is a pretty noisy change that was broken out of the larger change for replaying switchdev attributes and objects at bridge join time, which is when these extack objects are actually used. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-22 23:51:48 +00:00
info->upper_info, extack);
net: dsa: Link aggregation support Monitor the following events and notify the driver when: - A DSA port joins/leaves a LAG. - A LAG, made up of DSA ports, joins/leaves a bridge. - A DSA port in a LAG is enabled/disabled (enabled meaning "distributing" in 802.3ad LACP terms). When a LAG joins a bridge, the DSA subsystem will treat that as each individual port joining the bridge. The driver may look at the port's LAG device pointer to see if it is associated with any LAG, if that is required. This is analogue to how switchdev events are replicated out to all lower devices when reaching e.g. a LAG. Drivers can optionally request that DSA maintain a linear mapping from a LAG ID to the corresponding netdev by setting ds->num_lag_ids to the desired size. In the event that the hardware is not capable of offloading a particular LAG for any reason (the typical case being use of exotic modes like broadcast), DSA will take a hands-off approach, allowing the LAG to be formed as a pure software construct. This is reported back through the extended ACK, but is otherwise transparent to the user. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-13 08:42:53 +00:00
if (err == -EOPNOTSUPP) {
net: dsa: use NL_SET_ERR_MSG_WEAK_MOD() more consistently Now that commit 028fb19c6ba7 ("netlink: provide an ability to set default extack message") provides a weak function that doesn't override an existing extack message provided by the driver, it makes sense to use it also for LAG and HSR offloading, not just for bridge offloading. Also consistently put the message string on a separate line, to reduce line length from 92 to 84 characters. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230202140354.3158129-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-02 14:03:54 +00:00
NL_SET_ERR_MSG_WEAK_MOD(extack,
"Offloading not supported");
net: dsa: Link aggregation support Monitor the following events and notify the driver when: - A DSA port joins/leaves a LAG. - A LAG, made up of DSA ports, joins/leaves a bridge. - A DSA port in a LAG is enabled/disabled (enabled meaning "distributing" in 802.3ad LACP terms). When a LAG joins a bridge, the DSA subsystem will treat that as each individual port joining the bridge. The driver may look at the port's LAG device pointer to see if it is associated with any LAG, if that is required. This is analogue to how switchdev events are replicated out to all lower devices when reaching e.g. a LAG. Drivers can optionally request that DSA maintain a linear mapping from a LAG ID to the corresponding netdev by setting ds->num_lag_ids to the desired size. In the event that the hardware is not capable of offloading a particular LAG for any reason (the typical case being use of exotic modes like broadcast), DSA will take a hands-off approach, allowing the LAG to be formed as a pure software construct. This is reported back through the extended ACK, but is otherwise transparent to the user. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-13 08:42:53 +00:00
err = 0;
}
err = notifier_from_errno(err);
} else {
dsa_port_lag_leave(dp, info->upper_dev);
err = NOTIFY_OK;
}
net: dsa: add support for offloading HSR Add support for offloading of HSR/PRP (IEC 62439-3) tag insertion tag removal, duplicate generation and forwarding on DSA switches. Add DSA_NOTIFIER_HSR_JOIN and DSA_NOTIFIER_HSR_LEAVE which trigger calls to .port_hsr_join and .port_hsr_leave in the DSA driver for the switch. The DSA switch driver should then set netdev feature flags for the HSR/PRP operation that it offloads. NETIF_F_HW_HSR_TAG_INS NETIF_F_HW_HSR_TAG_RM NETIF_F_HW_HSR_FWD NETIF_F_HW_HSR_DUP Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10 01:02:12 +00:00
} else if (is_hsr_master(info->upper_dev)) {
if (info->linking) {
net: dsa: propagate extack to ds->ops->port_hsr_join() Drivers can provide meaningful error messages which state a reason why they can't perform an offload, and dsa_slave_changeupper() already has the infrastructure to propagate these over netlink rather than printing to the kernel log. So pass the extack argument and modify the xrs700x driver's port_hsr_join() prototype. Also take the opportunity and use the extack for the 2 -EOPNOTSUPP cases from xrs700x_hsr_join(). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-22 13:31:04 +00:00
err = dsa_port_hsr_join(dp, info->upper_dev, extack);
net: dsa: add support for offloading HSR Add support for offloading of HSR/PRP (IEC 62439-3) tag insertion tag removal, duplicate generation and forwarding on DSA switches. Add DSA_NOTIFIER_HSR_JOIN and DSA_NOTIFIER_HSR_LEAVE which trigger calls to .port_hsr_join and .port_hsr_leave in the DSA driver for the switch. The DSA switch driver should then set netdev feature flags for the HSR/PRP operation that it offloads. NETIF_F_HW_HSR_TAG_INS NETIF_F_HW_HSR_TAG_RM NETIF_F_HW_HSR_FWD NETIF_F_HW_HSR_DUP Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10 01:02:12 +00:00
if (err == -EOPNOTSUPP) {
net: dsa: use NL_SET_ERR_MSG_WEAK_MOD() more consistently Now that commit 028fb19c6ba7 ("netlink: provide an ability to set default extack message") provides a weak function that doesn't override an existing extack message provided by the driver, it makes sense to use it also for LAG and HSR offloading, not just for bridge offloading. Also consistently put the message string on a separate line, to reduce line length from 92 to 84 characters. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230202140354.3158129-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-02 14:03:54 +00:00
NL_SET_ERR_MSG_WEAK_MOD(extack,
"Offloading not supported");
net: dsa: add support for offloading HSR Add support for offloading of HSR/PRP (IEC 62439-3) tag insertion tag removal, duplicate generation and forwarding on DSA switches. Add DSA_NOTIFIER_HSR_JOIN and DSA_NOTIFIER_HSR_LEAVE which trigger calls to .port_hsr_join and .port_hsr_leave in the DSA driver for the switch. The DSA switch driver should then set netdev feature flags for the HSR/PRP operation that it offloads. NETIF_F_HW_HSR_TAG_INS NETIF_F_HW_HSR_TAG_RM NETIF_F_HW_HSR_FWD NETIF_F_HW_HSR_DUP Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10 01:02:12 +00:00
err = 0;
}
err = notifier_from_errno(err);
} else {
dsa_port_hsr_leave(dp, info->upper_dev);
err = NOTIFY_OK;
}
net: dsa: Link aggregation support Monitor the following events and notify the driver when: - A DSA port joins/leaves a LAG. - A LAG, made up of DSA ports, joins/leaves a bridge. - A DSA port in a LAG is enabled/disabled (enabled meaning "distributing" in 802.3ad LACP terms). When a LAG joins a bridge, the DSA subsystem will treat that as each individual port joining the bridge. The driver may look at the port's LAG device pointer to see if it is associated with any LAG, if that is required. This is analogue to how switchdev events are replicated out to all lower devices when reaching e.g. a LAG. Drivers can optionally request that DSA maintain a linear mapping from a LAG ID to the corresponding netdev by setting ds->num_lag_ids to the desired size. In the event that the hardware is not capable of offloading a particular LAG for any reason (the typical case being use of exotic modes like broadcast), DSA will take a hands-off approach, allowing the LAG to be formed as a pure software construct. This is reported back through the extended ACK, but is otherwise transparent to the user. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-13 08:42:53 +00:00
}
return err;
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_prechangeupper(struct net_device *dev,
struct netdev_notifier_changeupper_info *info)
net: dsa: replay a deletion of switchdev objects for ports leaving a bridged LAG When a DSA switch port leaves a bonding interface that is under a bridge, there might be dangling switchdev objects on that port left behind, because the bridge is not aware that its lower interface (the bond) changed state in any way. Call the bridge replay helpers with adding=false before changing dp->bridge_dev to NULL, because we need to simulate to dsa_slave_port_obj_del() that these notifications were emitted by the bridge. We add this hook to the NETDEV_PRECHANGEUPPER event handler, because we are calling into switchdev (and the __switchdev_handle_port_obj_del fanout helpers expect the upper/lower adjacency lists to still be valid) and PRECHANGEUPPER is the last moment in time when they still are. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-27 11:54:29 +00:00
{
net: dsa: fix netdev_priv() dereference before check on non-DSA netdevice events After the blamed commit, we started doing this dereference for every NETDEV_CHANGEUPPER and NETDEV_PRECHANGEUPPER event in the system. static inline struct dsa_port *dsa_user_to_port(const struct net_device *dev) { struct dsa_user_priv *p = netdev_priv(dev); return p->dp; } Which is obviously bogus, because not all net_devices have a netdev_priv() of type struct dsa_user_priv. But struct dsa_user_priv is fairly small, and p->dp means dereferencing 8 bytes starting with offset 16. Most drivers allocate that much private memory anyway, making our access not fault, and we discard the bogus data quickly afterwards, so this wasn't caught. But the dummy interface is somewhat special in that it calls alloc_netdev() with a priv size of 0. So every netdev_priv() dereference is invalid, and we get this when we emit a NETDEV_PRECHANGEUPPER event with a VLAN as its new upper: $ ip link add dummy1 type dummy $ ip link add link dummy1 name dummy1.100 type vlan id 100 [ 43.309174] ================================================================== [ 43.316456] BUG: KASAN: slab-out-of-bounds in dsa_user_prechangeupper+0x30/0xe8 [ 43.323835] Read of size 8 at addr ffff3f86481d2990 by task ip/374 [ 43.330058] [ 43.342436] Call trace: [ 43.366542] dsa_user_prechangeupper+0x30/0xe8 [ 43.371024] dsa_user_netdevice_event+0xb38/0xee8 [ 43.375768] notifier_call_chain+0xa4/0x210 [ 43.379985] raw_notifier_call_chain+0x24/0x38 [ 43.384464] __netdev_upper_dev_link+0x3ec/0x5d8 [ 43.389120] netdev_upper_dev_link+0x70/0xa8 [ 43.393424] register_vlan_dev+0x1bc/0x310 [ 43.397554] vlan_newlink+0x210/0x248 [ 43.401247] rtnl_newlink+0x9fc/0xe30 [ 43.404942] rtnetlink_rcv_msg+0x378/0x580 Avoid the kernel oops by dereferencing after the type check, as customary. Fixes: 4c3f80d22b2e ("net: dsa: walk through all changeupper notifier functions") Reported-and-tested-by: syzbot+d81bcd883824180500c8@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/0000000000001d4255060e87545c@google.com/ Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240110003354.2796778-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-10 00:33:54 +00:00
struct dsa_port *dp;
net: dsa: replay a deletion of switchdev objects for ports leaving a bridged LAG When a DSA switch port leaves a bonding interface that is under a bridge, there might be dangling switchdev objects on that port left behind, because the bridge is not aware that its lower interface (the bond) changed state in any way. Call the bridge replay helpers with adding=false before changing dp->bridge_dev to NULL, because we need to simulate to dsa_slave_port_obj_del() that these notifications were emitted by the bridge. We add this hook to the NETDEV_PRECHANGEUPPER event handler, because we are calling into switchdev (and the __switchdev_handle_port_obj_del fanout helpers expect the upper/lower adjacency lists to still be valid) and PRECHANGEUPPER is the last moment in time when they still are. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-27 11:54:29 +00:00
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
if (!dsa_user_dev_check(dev))
net: dsa: walk through all changeupper notifier functions Traditionally, DSA has had a single netdev notifier handling function for each device type. For the sake of code cleanliness, we would like to introduce more handling functions which do one thing, but the conditions for entering these functions start to overlap. Example: a handling function which tracks whether any bridges contain both DSA and non-DSA interfaces. Either this is placed before dsa_slave_changeupper(), case in which it will prevent that function from executing, or we place it after dsa_slave_changeupper(), case in which we will prevent it from executing. The other alternative is to ignore errors from the new handling function (not ideal). To support this usage, we need to change the pattern. In the new model, we enter all notifier handling sub-functions, and exit with NOTIFY_DONE if there is nothing to do. This allows the sub-functions to be relatively free-form and independent from each other. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-19 17:48:12 +00:00
return NOTIFY_DONE;
net: dsa: fix netdev_priv() dereference before check on non-DSA netdevice events After the blamed commit, we started doing this dereference for every NETDEV_CHANGEUPPER and NETDEV_PRECHANGEUPPER event in the system. static inline struct dsa_port *dsa_user_to_port(const struct net_device *dev) { struct dsa_user_priv *p = netdev_priv(dev); return p->dp; } Which is obviously bogus, because not all net_devices have a netdev_priv() of type struct dsa_user_priv. But struct dsa_user_priv is fairly small, and p->dp means dereferencing 8 bytes starting with offset 16. Most drivers allocate that much private memory anyway, making our access not fault, and we discard the bogus data quickly afterwards, so this wasn't caught. But the dummy interface is somewhat special in that it calls alloc_netdev() with a priv size of 0. So every netdev_priv() dereference is invalid, and we get this when we emit a NETDEV_PRECHANGEUPPER event with a VLAN as its new upper: $ ip link add dummy1 type dummy $ ip link add link dummy1 name dummy1.100 type vlan id 100 [ 43.309174] ================================================================== [ 43.316456] BUG: KASAN: slab-out-of-bounds in dsa_user_prechangeupper+0x30/0xe8 [ 43.323835] Read of size 8 at addr ffff3f86481d2990 by task ip/374 [ 43.330058] [ 43.342436] Call trace: [ 43.366542] dsa_user_prechangeupper+0x30/0xe8 [ 43.371024] dsa_user_netdevice_event+0xb38/0xee8 [ 43.375768] notifier_call_chain+0xa4/0x210 [ 43.379985] raw_notifier_call_chain+0x24/0x38 [ 43.384464] __netdev_upper_dev_link+0x3ec/0x5d8 [ 43.389120] netdev_upper_dev_link+0x70/0xa8 [ 43.393424] register_vlan_dev+0x1bc/0x310 [ 43.397554] vlan_newlink+0x210/0x248 [ 43.401247] rtnl_newlink+0x9fc/0xe30 [ 43.404942] rtnetlink_rcv_msg+0x378/0x580 Avoid the kernel oops by dereferencing after the type check, as customary. Fixes: 4c3f80d22b2e ("net: dsa: walk through all changeupper notifier functions") Reported-and-tested-by: syzbot+d81bcd883824180500c8@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/0000000000001d4255060e87545c@google.com/ Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240110003354.2796778-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-10 00:33:54 +00:00
dp = dsa_user_to_port(dev);
net: dsa: replay a deletion of switchdev objects for ports leaving a bridged LAG When a DSA switch port leaves a bonding interface that is under a bridge, there might be dangling switchdev objects on that port left behind, because the bridge is not aware that its lower interface (the bond) changed state in any way. Call the bridge replay helpers with adding=false before changing dp->bridge_dev to NULL, because we need to simulate to dsa_slave_port_obj_del() that these notifications were emitted by the bridge. We add this hook to the NETDEV_PRECHANGEUPPER event handler, because we are calling into switchdev (and the __switchdev_handle_port_obj_del fanout helpers expect the upper/lower adjacency lists to still be valid) and PRECHANGEUPPER is the last moment in time when they still are. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-27 11:54:29 +00:00
if (netif_is_bridge_master(info->upper_dev) && !info->linking)
net: bridge: move the switchdev object replay helpers to "push" mode Starting with commit 4f2673b3a2b6 ("net: bridge: add helper to replay port and host-joined mdb entries"), DSA has introduced some bridge helpers that replay switchdev events (FDB/MDB/VLAN additions and deletions) that can be lost by the switchdev drivers in a variety of circumstances: - an IP multicast group was host-joined on the bridge itself before any switchdev port joined the bridge, leading to the host MDB entries missing in the hardware database. - during the bridge creation process, the MAC address of the bridge was added to the FDB as an entry pointing towards the bridge device itself, but with no switchdev ports being part of the bridge yet, this local FDB entry would remain unknown to the switchdev hardware database. - a VLAN/FDB/MDB was added to a bridge port that is a LAG interface, before any switchdev port joined that LAG, leading to the hardware database missing those entries. - a switchdev port left a LAG that is a bridge port, while the LAG remained part of the bridge, and all FDB/MDB/VLAN entries remained installed in the hardware database of the switchdev port. Also, since commit 0d2cfbd41c4a ("net: bridge: ignore switchdev events for LAG ports which didn't request replay"), DSA introduced a method, based on a const void *ctx, to ensure that two switchdev ports under the same LAG that is a bridge port do not see the same MDB/VLAN entry being replayed twice by the bridge, once for every bridge port that joins the LAG. With so many ordering corner cases being possible, it seems unreasonable to expect a switchdev driver writer to get it right from the first try. Therefore, now that DSA has experimented with the bridge replay helpers for a little bit, we can move the code to the bridge driver where it is more readily available to all switchdev drivers. To convert the switchdev object replay helpers from "pull mode" (where the driver asks for them) to a "push mode" (where the bridge offers them automatically), the biggest problem is that the bridge needs to be aware when a switchdev port joins and leaves, even when the switchdev is only indirectly a bridge port (for example when the bridge port is a LAG upper of the switchdev). Luckily, we already have a hook for that, in the form of the newly introduced switchdev_bridge_port_offload() and switchdev_bridge_port_unoffload() calls. These offer a natural place for hooking the object addition and deletion replays. Extend the above 2 functions with: - pointers to the switchdev atomic notifier (for FDB replays) and the blocking notifier (for MDB and VLAN replays). - the "const void *ctx" argument required for drivers to be able to disambiguate between which port is targeted, when multiple ports are lowers of the same LAG that is a bridge port. Most of the drivers pass NULL to this argument, except the ones that support LAG offload and have the proper context check already in place in the switchdev blocking notifier handler. Also unexport the replay helpers, since nobody except the bridge calls them directly now. Note that: (a) we abuse the terminology slightly, because FDB entries are not "switchdev objects", but we count them as objects nonetheless. With no direct way to prove it, I think they are not modeled as switchdev objects because those can only be installed by the bridge to the hardware (as opposed to FDB entries which can be propagated in the other direction too). This is merely an abuse of terms, FDB entries are replayed too, despite not being objects. (b) the bridge does not attempt to sync port attributes to newly joined ports, just the countable stuff (the objects). The reason for this is simple: no universal and symmetric way to sync and unsync them is known. For example, VLAN filtering: what to do on unsync, disable or leave it enabled? Similarly, STP state, ageing timer, etc etc. What a switchdev port does when it becomes standalone again is not really up to the bridge's competence, and the driver should deal with it. On the other hand, replaying deletions of switchdev objects can be seen a matter of cleanup and therefore be treated by the bridge, hence this patch. We make the replay helpers opt-in for drivers, because they might not bring immediate benefits for them: - nbp_vlan_init() is called _after_ netdev_master_upper_dev_link(), so br_vlan_replay() should not do anything for the new drivers on which we call it. The existing drivers where there was even a slight possibility for there to exist a VLAN on a bridge port before they join it are already guarded against this: mlxsw and prestera deny joining LAG interfaces that are members of a bridge. - br_fdb_replay() should now notify of local FDB entries, but I patched all drivers except DSA to ignore these new entries in commit 2c4eca3ef716 ("net: bridge: switchdev: include local flag in FDB notifications"). Driver authors can lift this restriction as they wish, and when they do, they can also opt into the FDB replay functionality. - br_mdb_replay() should fix a real issue which is described in commit 4f2673b3a2b6 ("net: bridge: add helper to replay port and host-joined mdb entries"). However most drivers do not offload the SWITCHDEV_OBJ_ID_HOST_MDB to see this issue: only cpsw and am65_cpsw offload this switchdev object, and I don't completely understand the way in which they offload this switchdev object anyway. So I'll leave it up to these drivers' respective maintainers to opt into br_mdb_replay(). So most of the drivers pass NULL notifier blocks for the replay helpers, except: - dpaa2-switch which was already acked/regression-tested with the helpers enabled (and there isn't much of a downside in having them) - ocelot which already had replay logic in "pull" mode - DSA which already had replay logic in "pull" mode An important observation is that the drivers which don't currently request bridge event replays don't even have the switchdev_bridge_port_{offload,unoffload} calls placed in proper places right now. This was done to avoid unnecessary rework for drivers which might never even add support for this. For driver writers who wish to add replay support, this can be used as a tentative placement guide: https://patchwork.kernel.org/project/netdevbpf/patch/20210720134655.892334-11-vladimir.oltean@nxp.com/ Cc: Vadym Kochan <vkochan@marvell.com> Cc: Taras Chornyi <tchornyi@marvell.com> Cc: Ioana Ciornei <ioana.ciornei@nxp.com> Cc: Lars Povlsen <lars.povlsen@microchip.com> Cc: Steen Hegelund <Steen.Hegelund@microchip.com> Cc: UNGLinuxDriver@microchip.com Cc: Claudiu Manoil <claudiu.manoil@nxp.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Ioana Ciornei <ioana.ciornei@nxp.com> # dpaa2-switch Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21 16:24:03 +00:00
dsa_port_pre_bridge_leave(dp, info->upper_dev);
net: dsa: replay a deletion of switchdev objects for ports leaving a bridged LAG When a DSA switch port leaves a bonding interface that is under a bridge, there might be dangling switchdev objects on that port left behind, because the bridge is not aware that its lower interface (the bond) changed state in any way. Call the bridge replay helpers with adding=false before changing dp->bridge_dev to NULL, because we need to simulate to dsa_slave_port_obj_del() that these notifications were emitted by the bridge. We add this hook to the NETDEV_PRECHANGEUPPER event handler, because we are calling into switchdev (and the __switchdev_handle_port_obj_del fanout helpers expect the upper/lower adjacency lists to still be valid) and PRECHANGEUPPER is the last moment in time when they still are. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-27 11:54:29 +00:00
else if (netif_is_lag_master(info->upper_dev) && !info->linking)
net: bridge: move the switchdev object replay helpers to "push" mode Starting with commit 4f2673b3a2b6 ("net: bridge: add helper to replay port and host-joined mdb entries"), DSA has introduced some bridge helpers that replay switchdev events (FDB/MDB/VLAN additions and deletions) that can be lost by the switchdev drivers in a variety of circumstances: - an IP multicast group was host-joined on the bridge itself before any switchdev port joined the bridge, leading to the host MDB entries missing in the hardware database. - during the bridge creation process, the MAC address of the bridge was added to the FDB as an entry pointing towards the bridge device itself, but with no switchdev ports being part of the bridge yet, this local FDB entry would remain unknown to the switchdev hardware database. - a VLAN/FDB/MDB was added to a bridge port that is a LAG interface, before any switchdev port joined that LAG, leading to the hardware database missing those entries. - a switchdev port left a LAG that is a bridge port, while the LAG remained part of the bridge, and all FDB/MDB/VLAN entries remained installed in the hardware database of the switchdev port. Also, since commit 0d2cfbd41c4a ("net: bridge: ignore switchdev events for LAG ports which didn't request replay"), DSA introduced a method, based on a const void *ctx, to ensure that two switchdev ports under the same LAG that is a bridge port do not see the same MDB/VLAN entry being replayed twice by the bridge, once for every bridge port that joins the LAG. With so many ordering corner cases being possible, it seems unreasonable to expect a switchdev driver writer to get it right from the first try. Therefore, now that DSA has experimented with the bridge replay helpers for a little bit, we can move the code to the bridge driver where it is more readily available to all switchdev drivers. To convert the switchdev object replay helpers from "pull mode" (where the driver asks for them) to a "push mode" (where the bridge offers them automatically), the biggest problem is that the bridge needs to be aware when a switchdev port joins and leaves, even when the switchdev is only indirectly a bridge port (for example when the bridge port is a LAG upper of the switchdev). Luckily, we already have a hook for that, in the form of the newly introduced switchdev_bridge_port_offload() and switchdev_bridge_port_unoffload() calls. These offer a natural place for hooking the object addition and deletion replays. Extend the above 2 functions with: - pointers to the switchdev atomic notifier (for FDB replays) and the blocking notifier (for MDB and VLAN replays). - the "const void *ctx" argument required for drivers to be able to disambiguate between which port is targeted, when multiple ports are lowers of the same LAG that is a bridge port. Most of the drivers pass NULL to this argument, except the ones that support LAG offload and have the proper context check already in place in the switchdev blocking notifier handler. Also unexport the replay helpers, since nobody except the bridge calls them directly now. Note that: (a) we abuse the terminology slightly, because FDB entries are not "switchdev objects", but we count them as objects nonetheless. With no direct way to prove it, I think they are not modeled as switchdev objects because those can only be installed by the bridge to the hardware (as opposed to FDB entries which can be propagated in the other direction too). This is merely an abuse of terms, FDB entries are replayed too, despite not being objects. (b) the bridge does not attempt to sync port attributes to newly joined ports, just the countable stuff (the objects). The reason for this is simple: no universal and symmetric way to sync and unsync them is known. For example, VLAN filtering: what to do on unsync, disable or leave it enabled? Similarly, STP state, ageing timer, etc etc. What a switchdev port does when it becomes standalone again is not really up to the bridge's competence, and the driver should deal with it. On the other hand, replaying deletions of switchdev objects can be seen a matter of cleanup and therefore be treated by the bridge, hence this patch. We make the replay helpers opt-in for drivers, because they might not bring immediate benefits for them: - nbp_vlan_init() is called _after_ netdev_master_upper_dev_link(), so br_vlan_replay() should not do anything for the new drivers on which we call it. The existing drivers where there was even a slight possibility for there to exist a VLAN on a bridge port before they join it are already guarded against this: mlxsw and prestera deny joining LAG interfaces that are members of a bridge. - br_fdb_replay() should now notify of local FDB entries, but I patched all drivers except DSA to ignore these new entries in commit 2c4eca3ef716 ("net: bridge: switchdev: include local flag in FDB notifications"). Driver authors can lift this restriction as they wish, and when they do, they can also opt into the FDB replay functionality. - br_mdb_replay() should fix a real issue which is described in commit 4f2673b3a2b6 ("net: bridge: add helper to replay port and host-joined mdb entries"). However most drivers do not offload the SWITCHDEV_OBJ_ID_HOST_MDB to see this issue: only cpsw and am65_cpsw offload this switchdev object, and I don't completely understand the way in which they offload this switchdev object anyway. So I'll leave it up to these drivers' respective maintainers to opt into br_mdb_replay(). So most of the drivers pass NULL notifier blocks for the replay helpers, except: - dpaa2-switch which was already acked/regression-tested with the helpers enabled (and there isn't much of a downside in having them) - ocelot which already had replay logic in "pull" mode - DSA which already had replay logic in "pull" mode An important observation is that the drivers which don't currently request bridge event replays don't even have the switchdev_bridge_port_{offload,unoffload} calls placed in proper places right now. This was done to avoid unnecessary rework for drivers which might never even add support for this. For driver writers who wish to add replay support, this can be used as a tentative placement guide: https://patchwork.kernel.org/project/netdevbpf/patch/20210720134655.892334-11-vladimir.oltean@nxp.com/ Cc: Vadym Kochan <vkochan@marvell.com> Cc: Taras Chornyi <tchornyi@marvell.com> Cc: Ioana Ciornei <ioana.ciornei@nxp.com> Cc: Lars Povlsen <lars.povlsen@microchip.com> Cc: Steen Hegelund <Steen.Hegelund@microchip.com> Cc: UNGLinuxDriver@microchip.com Cc: Claudiu Manoil <claudiu.manoil@nxp.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Ioana Ciornei <ioana.ciornei@nxp.com> # dpaa2-switch Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21 16:24:03 +00:00
dsa_port_pre_lag_leave(dp, info->upper_dev);
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
/* dsa_port_pre_hsr_leave is not yet necessary since hsr devices cannot
* meaningfully placed under a bridge yet
net: dsa: replay a deletion of switchdev objects for ports leaving a bridged LAG When a DSA switch port leaves a bonding interface that is under a bridge, there might be dangling switchdev objects on that port left behind, because the bridge is not aware that its lower interface (the bond) changed state in any way. Call the bridge replay helpers with adding=false before changing dp->bridge_dev to NULL, because we need to simulate to dsa_slave_port_obj_del() that these notifications were emitted by the bridge. We add this hook to the NETDEV_PRECHANGEUPPER event handler, because we are calling into switchdev (and the __switchdev_handle_port_obj_del fanout helpers expect the upper/lower adjacency lists to still be valid) and PRECHANGEUPPER is the last moment in time when they still are. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-27 11:54:29 +00:00
*/
net: bridge: move the switchdev object replay helpers to "push" mode Starting with commit 4f2673b3a2b6 ("net: bridge: add helper to replay port and host-joined mdb entries"), DSA has introduced some bridge helpers that replay switchdev events (FDB/MDB/VLAN additions and deletions) that can be lost by the switchdev drivers in a variety of circumstances: - an IP multicast group was host-joined on the bridge itself before any switchdev port joined the bridge, leading to the host MDB entries missing in the hardware database. - during the bridge creation process, the MAC address of the bridge was added to the FDB as an entry pointing towards the bridge device itself, but with no switchdev ports being part of the bridge yet, this local FDB entry would remain unknown to the switchdev hardware database. - a VLAN/FDB/MDB was added to a bridge port that is a LAG interface, before any switchdev port joined that LAG, leading to the hardware database missing those entries. - a switchdev port left a LAG that is a bridge port, while the LAG remained part of the bridge, and all FDB/MDB/VLAN entries remained installed in the hardware database of the switchdev port. Also, since commit 0d2cfbd41c4a ("net: bridge: ignore switchdev events for LAG ports which didn't request replay"), DSA introduced a method, based on a const void *ctx, to ensure that two switchdev ports under the same LAG that is a bridge port do not see the same MDB/VLAN entry being replayed twice by the bridge, once for every bridge port that joins the LAG. With so many ordering corner cases being possible, it seems unreasonable to expect a switchdev driver writer to get it right from the first try. Therefore, now that DSA has experimented with the bridge replay helpers for a little bit, we can move the code to the bridge driver where it is more readily available to all switchdev drivers. To convert the switchdev object replay helpers from "pull mode" (where the driver asks for them) to a "push mode" (where the bridge offers them automatically), the biggest problem is that the bridge needs to be aware when a switchdev port joins and leaves, even when the switchdev is only indirectly a bridge port (for example when the bridge port is a LAG upper of the switchdev). Luckily, we already have a hook for that, in the form of the newly introduced switchdev_bridge_port_offload() and switchdev_bridge_port_unoffload() calls. These offer a natural place for hooking the object addition and deletion replays. Extend the above 2 functions with: - pointers to the switchdev atomic notifier (for FDB replays) and the blocking notifier (for MDB and VLAN replays). - the "const void *ctx" argument required for drivers to be able to disambiguate between which port is targeted, when multiple ports are lowers of the same LAG that is a bridge port. Most of the drivers pass NULL to this argument, except the ones that support LAG offload and have the proper context check already in place in the switchdev blocking notifier handler. Also unexport the replay helpers, since nobody except the bridge calls them directly now. Note that: (a) we abuse the terminology slightly, because FDB entries are not "switchdev objects", but we count them as objects nonetheless. With no direct way to prove it, I think they are not modeled as switchdev objects because those can only be installed by the bridge to the hardware (as opposed to FDB entries which can be propagated in the other direction too). This is merely an abuse of terms, FDB entries are replayed too, despite not being objects. (b) the bridge does not attempt to sync port attributes to newly joined ports, just the countable stuff (the objects). The reason for this is simple: no universal and symmetric way to sync and unsync them is known. For example, VLAN filtering: what to do on unsync, disable or leave it enabled? Similarly, STP state, ageing timer, etc etc. What a switchdev port does when it becomes standalone again is not really up to the bridge's competence, and the driver should deal with it. On the other hand, replaying deletions of switchdev objects can be seen a matter of cleanup and therefore be treated by the bridge, hence this patch. We make the replay helpers opt-in for drivers, because they might not bring immediate benefits for them: - nbp_vlan_init() is called _after_ netdev_master_upper_dev_link(), so br_vlan_replay() should not do anything for the new drivers on which we call it. The existing drivers where there was even a slight possibility for there to exist a VLAN on a bridge port before they join it are already guarded against this: mlxsw and prestera deny joining LAG interfaces that are members of a bridge. - br_fdb_replay() should now notify of local FDB entries, but I patched all drivers except DSA to ignore these new entries in commit 2c4eca3ef716 ("net: bridge: switchdev: include local flag in FDB notifications"). Driver authors can lift this restriction as they wish, and when they do, they can also opt into the FDB replay functionality. - br_mdb_replay() should fix a real issue which is described in commit 4f2673b3a2b6 ("net: bridge: add helper to replay port and host-joined mdb entries"). However most drivers do not offload the SWITCHDEV_OBJ_ID_HOST_MDB to see this issue: only cpsw and am65_cpsw offload this switchdev object, and I don't completely understand the way in which they offload this switchdev object anyway. So I'll leave it up to these drivers' respective maintainers to opt into br_mdb_replay(). So most of the drivers pass NULL notifier blocks for the replay helpers, except: - dpaa2-switch which was already acked/regression-tested with the helpers enabled (and there isn't much of a downside in having them) - ocelot which already had replay logic in "pull" mode - DSA which already had replay logic in "pull" mode An important observation is that the drivers which don't currently request bridge event replays don't even have the switchdev_bridge_port_{offload,unoffload} calls placed in proper places right now. This was done to avoid unnecessary rework for drivers which might never even add support for this. For driver writers who wish to add replay support, this can be used as a tentative placement guide: https://patchwork.kernel.org/project/netdevbpf/patch/20210720134655.892334-11-vladimir.oltean@nxp.com/ Cc: Vadym Kochan <vkochan@marvell.com> Cc: Taras Chornyi <tchornyi@marvell.com> Cc: Ioana Ciornei <ioana.ciornei@nxp.com> Cc: Lars Povlsen <lars.povlsen@microchip.com> Cc: Steen Hegelund <Steen.Hegelund@microchip.com> Cc: UNGLinuxDriver@microchip.com Cc: Claudiu Manoil <claudiu.manoil@nxp.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Ioana Ciornei <ioana.ciornei@nxp.com> # dpaa2-switch Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21 16:24:03 +00:00
return NOTIFY_DONE;
net: dsa: replay a deletion of switchdev objects for ports leaving a bridged LAG When a DSA switch port leaves a bonding interface that is under a bridge, there might be dangling switchdev objects on that port left behind, because the bridge is not aware that its lower interface (the bond) changed state in any way. Call the bridge replay helpers with adding=false before changing dp->bridge_dev to NULL, because we need to simulate to dsa_slave_port_obj_del() that these notifications were emitted by the bridge. We add this hook to the NETDEV_PRECHANGEUPPER event handler, because we are calling into switchdev (and the __switchdev_handle_port_obj_del fanout helpers expect the upper/lower adjacency lists to still be valid) and PRECHANGEUPPER is the last moment in time when they still are. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-27 11:54:29 +00:00
}
net: dsa: Link aggregation support Monitor the following events and notify the driver when: - A DSA port joins/leaves a LAG. - A LAG, made up of DSA ports, joins/leaves a bridge. - A DSA port in a LAG is enabled/disabled (enabled meaning "distributing" in 802.3ad LACP terms). When a LAG joins a bridge, the DSA subsystem will treat that as each individual port joining the bridge. The driver may look at the port's LAG device pointer to see if it is associated with any LAG, if that is required. This is analogue to how switchdev events are replicated out to all lower devices when reaching e.g. a LAG. Drivers can optionally request that DSA maintain a linear mapping from a LAG ID to the corresponding netdev by setting ds->num_lag_ids to the desired size. In the event that the hardware is not capable of offloading a particular LAG for any reason (the typical case being use of exotic modes like broadcast), DSA will take a hands-off approach, allowing the LAG to be formed as a pure software construct. This is reported back through the extended ACK, but is otherwise transparent to the user. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-13 08:42:53 +00:00
static int
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dsa_user_lag_changeupper(struct net_device *dev,
struct netdev_notifier_changeupper_info *info)
net: dsa: Link aggregation support Monitor the following events and notify the driver when: - A DSA port joins/leaves a LAG. - A LAG, made up of DSA ports, joins/leaves a bridge. - A DSA port in a LAG is enabled/disabled (enabled meaning "distributing" in 802.3ad LACP terms). When a LAG joins a bridge, the DSA subsystem will treat that as each individual port joining the bridge. The driver may look at the port's LAG device pointer to see if it is associated with any LAG, if that is required. This is analogue to how switchdev events are replicated out to all lower devices when reaching e.g. a LAG. Drivers can optionally request that DSA maintain a linear mapping from a LAG ID to the corresponding netdev by setting ds->num_lag_ids to the desired size. In the event that the hardware is not capable of offloading a particular LAG for any reason (the typical case being use of exotic modes like broadcast), DSA will take a hands-off approach, allowing the LAG to be formed as a pure software construct. This is reported back through the extended ACK, but is otherwise transparent to the user. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-13 08:42:53 +00:00
{
struct net_device *lower;
struct list_head *iter;
int err = NOTIFY_DONE;
struct dsa_port *dp;
net: dsa: walk through all changeupper notifier functions Traditionally, DSA has had a single netdev notifier handling function for each device type. For the sake of code cleanliness, we would like to introduce more handling functions which do one thing, but the conditions for entering these functions start to overlap. Example: a handling function which tracks whether any bridges contain both DSA and non-DSA interfaces. Either this is placed before dsa_slave_changeupper(), case in which it will prevent that function from executing, or we place it after dsa_slave_changeupper(), case in which we will prevent it from executing. The other alternative is to ignore errors from the new handling function (not ideal). To support this usage, we need to change the pattern. In the new model, we enter all notifier handling sub-functions, and exit with NOTIFY_DONE if there is nothing to do. This allows the sub-functions to be relatively free-form and independent from each other. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-19 17:48:12 +00:00
if (!netif_is_lag_master(dev))
return err;
net: dsa: Link aggregation support Monitor the following events and notify the driver when: - A DSA port joins/leaves a LAG. - A LAG, made up of DSA ports, joins/leaves a bridge. - A DSA port in a LAG is enabled/disabled (enabled meaning "distributing" in 802.3ad LACP terms). When a LAG joins a bridge, the DSA subsystem will treat that as each individual port joining the bridge. The driver may look at the port's LAG device pointer to see if it is associated with any LAG, if that is required. This is analogue to how switchdev events are replicated out to all lower devices when reaching e.g. a LAG. Drivers can optionally request that DSA maintain a linear mapping from a LAG ID to the corresponding netdev by setting ds->num_lag_ids to the desired size. In the event that the hardware is not capable of offloading a particular LAG for any reason (the typical case being use of exotic modes like broadcast), DSA will take a hands-off approach, allowing the LAG to be formed as a pure software construct. This is reported back through the extended ACK, but is otherwise transparent to the user. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-13 08:42:53 +00:00
netdev_for_each_lower_dev(dev, lower, iter) {
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
if (!dsa_user_dev_check(lower))
net: dsa: Link aggregation support Monitor the following events and notify the driver when: - A DSA port joins/leaves a LAG. - A LAG, made up of DSA ports, joins/leaves a bridge. - A DSA port in a LAG is enabled/disabled (enabled meaning "distributing" in 802.3ad LACP terms). When a LAG joins a bridge, the DSA subsystem will treat that as each individual port joining the bridge. The driver may look at the port's LAG device pointer to see if it is associated with any LAG, if that is required. This is analogue to how switchdev events are replicated out to all lower devices when reaching e.g. a LAG. Drivers can optionally request that DSA maintain a linear mapping from a LAG ID to the corresponding netdev by setting ds->num_lag_ids to the desired size. In the event that the hardware is not capable of offloading a particular LAG for any reason (the typical case being use of exotic modes like broadcast), DSA will take a hands-off approach, allowing the LAG to be formed as a pure software construct. This is reported back through the extended ACK, but is otherwise transparent to the user. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-13 08:42:53 +00:00
continue;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dp = dsa_user_to_port(lower);
net: dsa: create a dsa_lag structure The main purpose of this change is to create a data structure for a LAG as seen by DSA. This is similar to what we have for bridging - we pass a copy of this structure by value to ->port_lag_join and ->port_lag_leave. For now we keep the lag_dev, id and a reference count in it. Future patches will add a list of FDB entries for the LAG (these also need to be refcounted to work properly). The LAG structure is created using dsa_port_lag_create() and destroyed using dsa_port_lag_destroy(), just like we have for bridging. Because now, the dsa_lag itself is refcounted, we can simplify dsa_lag_map() and dsa_lag_unmap(). These functions need to keep a LAG in the dst->lags array only as long as at least one port uses it. The refcounting logic inside those functions can be removed now - they are called only when we should perform the operation. dsa_lag_dev() is renamed to dsa_lag_by_id() and now returns the dsa_lag structure instead of the lag_dev net_device. dsa_lag_foreach_port() now takes the dsa_lag structure as argument. dst->lags holds an array of dsa_lag structures. dsa_lag_map() now also saves the dsa_lag->id value, so that linear walking of dst->lags in drivers using dsa_lag_id() is no longer necessary. They can just look at lag.id. dsa_port_lag_id_get() is a helper, similar to dsa_port_bridge_num_get(), which can be used by drivers to get the LAG ID assigned by DSA to a given port. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-23 14:00:49 +00:00
if (!dp->lag)
net: dsa: Link aggregation support Monitor the following events and notify the driver when: - A DSA port joins/leaves a LAG. - A LAG, made up of DSA ports, joins/leaves a bridge. - A DSA port in a LAG is enabled/disabled (enabled meaning "distributing" in 802.3ad LACP terms). When a LAG joins a bridge, the DSA subsystem will treat that as each individual port joining the bridge. The driver may look at the port's LAG device pointer to see if it is associated with any LAG, if that is required. This is analogue to how switchdev events are replicated out to all lower devices when reaching e.g. a LAG. Drivers can optionally request that DSA maintain a linear mapping from a LAG ID to the corresponding netdev by setting ds->num_lag_ids to the desired size. In the event that the hardware is not capable of offloading a particular LAG for any reason (the typical case being use of exotic modes like broadcast), DSA will take a hands-off approach, allowing the LAG to be formed as a pure software construct. This is reported back through the extended ACK, but is otherwise transparent to the user. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-13 08:42:53 +00:00
/* Software LAG */
continue;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
err = dsa_user_changeupper(lower, info);
net: dsa: Link aggregation support Monitor the following events and notify the driver when: - A DSA port joins/leaves a LAG. - A LAG, made up of DSA ports, joins/leaves a bridge. - A DSA port in a LAG is enabled/disabled (enabled meaning "distributing" in 802.3ad LACP terms). When a LAG joins a bridge, the DSA subsystem will treat that as each individual port joining the bridge. The driver may look at the port's LAG device pointer to see if it is associated with any LAG, if that is required. This is analogue to how switchdev events are replicated out to all lower devices when reaching e.g. a LAG. Drivers can optionally request that DSA maintain a linear mapping from a LAG ID to the corresponding netdev by setting ds->num_lag_ids to the desired size. In the event that the hardware is not capable of offloading a particular LAG for any reason (the typical case being use of exotic modes like broadcast), DSA will take a hands-off approach, allowing the LAG to be formed as a pure software construct. This is reported back through the extended ACK, but is otherwise transparent to the user. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-13 08:42:53 +00:00
if (notifier_to_errno(err))
break;
net: dsa: refine netdev event notifier Rework the netdev event handler, similar to what the Mellanox Spectrum driver does, to easily welcome more events later (for example NETDEV_PRECHANGEUPPER) and use netdev helpers (such as netif_is_bridge_master). Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-13 20:21:34 +00:00
}
net: dsa: integrate with SWITCHDEV for HW bridging In order to support bridging offloads in DSA switch drivers, select NET_SWITCHDEV to get access to the port_stp_update and parent_get_id NDOs that we are required to implement. To facilitate the integratation at the DSA driver level, we implement 3 types of operations: - port_join_bridge - port_leave_bridge - port_stp_update DSA will resolve which switch ports that are currently bridge port members as some Switch hardware/drivers need to know about that to limit the register programming to just the relevant registers (especially for slow MDIO buses). We also take care of setting the correct STP state when slave network devices are brought up/down while being bridge members. Finally, when a port is leaving the bridge, we make sure we set in BR_STATE_FORWARDING state, otherwise the bridge layer would leave it disabled as a result of having left the bridge. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-24 21:15:33 +00:00
net: dsa: simplify netdevice events handling Simplify the code handling the slave netdevice notifier call by providing a dsa_slave_changeupper helper for NETDEV_CHANGEUPPER, and so on (only this event is supported at the moment.) Return NOTIFY_DONE when we did not care about an event, and NOTIFY_OK when we were concerned but no error occurred, as the API suggests. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03 18:20:17 +00:00
return err;
net: dsa: refine netdev event notifier Rework the netdev event handler, similar to what the Mellanox Spectrum driver does, to easily welcome more events later (for example NETDEV_PRECHANGEUPPER) and use netdev helpers (such as netif_is_bridge_master). Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-13 20:21:34 +00:00
}
net: dsa: integrate with SWITCHDEV for HW bridging In order to support bridging offloads in DSA switch drivers, select NET_SWITCHDEV to get access to the port_stp_update and parent_get_id NDOs that we are required to implement. To facilitate the integratation at the DSA driver level, we implement 3 types of operations: - port_join_bridge - port_leave_bridge - port_stp_update DSA will resolve which switch ports that are currently bridge port members as some Switch hardware/drivers need to know about that to limit the register programming to just the relevant registers (especially for slow MDIO buses). We also take care of setting the correct STP state when slave network devices are brought up/down while being bridge members. Finally, when a port is leaving the bridge, we make sure we set in BR_STATE_FORWARDING state, otherwise the bridge layer would leave it disabled as a result of having left the bridge. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-24 21:15:33 +00:00
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
/* Same as dsa_user_lag_changeupper() except that it calls
* dsa_user_prechangeupper()
net: dsa: replay a deletion of switchdev objects for ports leaving a bridged LAG When a DSA switch port leaves a bonding interface that is under a bridge, there might be dangling switchdev objects on that port left behind, because the bridge is not aware that its lower interface (the bond) changed state in any way. Call the bridge replay helpers with adding=false before changing dp->bridge_dev to NULL, because we need to simulate to dsa_slave_port_obj_del() that these notifications were emitted by the bridge. We add this hook to the NETDEV_PRECHANGEUPPER event handler, because we are calling into switchdev (and the __switchdev_handle_port_obj_del fanout helpers expect the upper/lower adjacency lists to still be valid) and PRECHANGEUPPER is the last moment in time when they still are. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-27 11:54:29 +00:00
*/
static int
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dsa_user_lag_prechangeupper(struct net_device *dev,
struct netdev_notifier_changeupper_info *info)
net: dsa: replay a deletion of switchdev objects for ports leaving a bridged LAG When a DSA switch port leaves a bonding interface that is under a bridge, there might be dangling switchdev objects on that port left behind, because the bridge is not aware that its lower interface (the bond) changed state in any way. Call the bridge replay helpers with adding=false before changing dp->bridge_dev to NULL, because we need to simulate to dsa_slave_port_obj_del() that these notifications were emitted by the bridge. We add this hook to the NETDEV_PRECHANGEUPPER event handler, because we are calling into switchdev (and the __switchdev_handle_port_obj_del fanout helpers expect the upper/lower adjacency lists to still be valid) and PRECHANGEUPPER is the last moment in time when they still are. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-27 11:54:29 +00:00
{
struct net_device *lower;
struct list_head *iter;
int err = NOTIFY_DONE;
struct dsa_port *dp;
net: dsa: walk through all changeupper notifier functions Traditionally, DSA has had a single netdev notifier handling function for each device type. For the sake of code cleanliness, we would like to introduce more handling functions which do one thing, but the conditions for entering these functions start to overlap. Example: a handling function which tracks whether any bridges contain both DSA and non-DSA interfaces. Either this is placed before dsa_slave_changeupper(), case in which it will prevent that function from executing, or we place it after dsa_slave_changeupper(), case in which we will prevent it from executing. The other alternative is to ignore errors from the new handling function (not ideal). To support this usage, we need to change the pattern. In the new model, we enter all notifier handling sub-functions, and exit with NOTIFY_DONE if there is nothing to do. This allows the sub-functions to be relatively free-form and independent from each other. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-19 17:48:12 +00:00
if (!netif_is_lag_master(dev))
return err;
net: dsa: replay a deletion of switchdev objects for ports leaving a bridged LAG When a DSA switch port leaves a bonding interface that is under a bridge, there might be dangling switchdev objects on that port left behind, because the bridge is not aware that its lower interface (the bond) changed state in any way. Call the bridge replay helpers with adding=false before changing dp->bridge_dev to NULL, because we need to simulate to dsa_slave_port_obj_del() that these notifications were emitted by the bridge. We add this hook to the NETDEV_PRECHANGEUPPER event handler, because we are calling into switchdev (and the __switchdev_handle_port_obj_del fanout helpers expect the upper/lower adjacency lists to still be valid) and PRECHANGEUPPER is the last moment in time when they still are. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-27 11:54:29 +00:00
netdev_for_each_lower_dev(dev, lower, iter) {
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
if (!dsa_user_dev_check(lower))
net: dsa: replay a deletion of switchdev objects for ports leaving a bridged LAG When a DSA switch port leaves a bonding interface that is under a bridge, there might be dangling switchdev objects on that port left behind, because the bridge is not aware that its lower interface (the bond) changed state in any way. Call the bridge replay helpers with adding=false before changing dp->bridge_dev to NULL, because we need to simulate to dsa_slave_port_obj_del() that these notifications were emitted by the bridge. We add this hook to the NETDEV_PRECHANGEUPPER event handler, because we are calling into switchdev (and the __switchdev_handle_port_obj_del fanout helpers expect the upper/lower adjacency lists to still be valid) and PRECHANGEUPPER is the last moment in time when they still are. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-27 11:54:29 +00:00
continue;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dp = dsa_user_to_port(lower);
net: dsa: create a dsa_lag structure The main purpose of this change is to create a data structure for a LAG as seen by DSA. This is similar to what we have for bridging - we pass a copy of this structure by value to ->port_lag_join and ->port_lag_leave. For now we keep the lag_dev, id and a reference count in it. Future patches will add a list of FDB entries for the LAG (these also need to be refcounted to work properly). The LAG structure is created using dsa_port_lag_create() and destroyed using dsa_port_lag_destroy(), just like we have for bridging. Because now, the dsa_lag itself is refcounted, we can simplify dsa_lag_map() and dsa_lag_unmap(). These functions need to keep a LAG in the dst->lags array only as long as at least one port uses it. The refcounting logic inside those functions can be removed now - they are called only when we should perform the operation. dsa_lag_dev() is renamed to dsa_lag_by_id() and now returns the dsa_lag structure instead of the lag_dev net_device. dsa_lag_foreach_port() now takes the dsa_lag structure as argument. dst->lags holds an array of dsa_lag structures. dsa_lag_map() now also saves the dsa_lag->id value, so that linear walking of dst->lags in drivers using dsa_lag_id() is no longer necessary. They can just look at lag.id. dsa_port_lag_id_get() is a helper, similar to dsa_port_bridge_num_get(), which can be used by drivers to get the LAG ID assigned by DSA to a given port. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-23 14:00:49 +00:00
if (!dp->lag)
net: dsa: replay a deletion of switchdev objects for ports leaving a bridged LAG When a DSA switch port leaves a bonding interface that is under a bridge, there might be dangling switchdev objects on that port left behind, because the bridge is not aware that its lower interface (the bond) changed state in any way. Call the bridge replay helpers with adding=false before changing dp->bridge_dev to NULL, because we need to simulate to dsa_slave_port_obj_del() that these notifications were emitted by the bridge. We add this hook to the NETDEV_PRECHANGEUPPER event handler, because we are calling into switchdev (and the __switchdev_handle_port_obj_del fanout helpers expect the upper/lower adjacency lists to still be valid) and PRECHANGEUPPER is the last moment in time when they still are. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-27 11:54:29 +00:00
/* Software LAG */
continue;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
err = dsa_user_prechangeupper(lower, info);
net: dsa: replay a deletion of switchdev objects for ports leaving a bridged LAG When a DSA switch port leaves a bonding interface that is under a bridge, there might be dangling switchdev objects on that port left behind, because the bridge is not aware that its lower interface (the bond) changed state in any way. Call the bridge replay helpers with adding=false before changing dp->bridge_dev to NULL, because we need to simulate to dsa_slave_port_obj_del() that these notifications were emitted by the bridge. We add this hook to the NETDEV_PRECHANGEUPPER event handler, because we are calling into switchdev (and the __switchdev_handle_port_obj_del fanout helpers expect the upper/lower adjacency lists to still be valid) and PRECHANGEUPPER is the last moment in time when they still are. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-27 11:54:29 +00:00
if (notifier_to_errno(err))
break;
}
return err;
}
net: dsa: rename dsa_slave_upper_vlan_check to something more suggestive We'll be adding a new check in the PRECHANGEUPPER notifier, where we'll need to check some VLAN uppers. It is hard to do that when there is already a function named dsa_slave_upper_vlan_check. So rename this one. Not to mention that this function probably shouldn't have started with "dsa_slave_" in the first place, since the struct net_device argument isn't a DSA slave, but an 8021q upper of one. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21 00:10:24 +00:00
static int
dsa_prevent_bridging_8021q_upper(struct net_device *dev,
struct netdev_notifier_changeupper_info *info)
net: dsa: Deny enslaving VLAN devices into VLAN aware bridge VLAN devices on top of a DSA network device which is already part of a bridge and with said bridge being VLAN aware should not be allowed to be enslaved into that bridge. For one, this duplicates functionality offered by the VLAN aware bridge which supports tagged and untagged VLAN frames processing and it would make things needlessly complex to e.g.: propagate FDB/MDB accordingly. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-20 22:35:38 +00:00
{
struct netlink_ext_ack *ext_ack;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct net_device *user, *br;
net: dsa: Deny enslaving VLAN devices into VLAN aware bridge VLAN devices on top of a DSA network device which is already part of a bridge and with said bridge being VLAN aware should not be allowed to be enslaved into that bridge. For one, this duplicates functionality offered by the VLAN aware bridge which supports tagged and untagged VLAN frames processing and it would make things needlessly complex to e.g.: propagate FDB/MDB accordingly. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-20 22:35:38 +00:00
struct dsa_port *dp;
ext_ack = netdev_notifier_info_to_extack(&info->info);
if (!is_vlan_dev(dev))
return NOTIFY_DONE;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
user = vlan_dev_real_dev(dev);
if (!dsa_user_dev_check(user))
net: dsa: Deny enslaving VLAN devices into VLAN aware bridge VLAN devices on top of a DSA network device which is already part of a bridge and with said bridge being VLAN aware should not be allowed to be enslaved into that bridge. For one, this duplicates functionality offered by the VLAN aware bridge which supports tagged and untagged VLAN frames processing and it would make things needlessly complex to e.g.: propagate FDB/MDB accordingly. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-20 22:35:38 +00:00
return NOTIFY_DONE;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dp = dsa_user_to_port(user);
net: dsa: hide dp->bridge_dev and dp->bridge_num in the core behind helpers The location of the bridge device pointer and number is going to change. It is not going to be kept individually per port, but in a common structure allocated dynamically and which will have lockdep validation. Create helpers to access these elements so that we have a migration path to the new organization. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-06 16:57:52 +00:00
br = dsa_port_bridge_dev_get(dp);
if (!br)
net: dsa: Deny enslaving VLAN devices into VLAN aware bridge VLAN devices on top of a DSA network device which is already part of a bridge and with said bridge being VLAN aware should not be allowed to be enslaved into that bridge. For one, this duplicates functionality offered by the VLAN aware bridge which supports tagged and untagged VLAN frames processing and it would make things needlessly complex to e.g.: propagate FDB/MDB accordingly. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-20 22:35:38 +00:00
return NOTIFY_DONE;
/* Deny enslaving a VLAN device into a VLAN-aware bridge */
net: dsa: hide dp->bridge_dev and dp->bridge_num in the core behind helpers The location of the bridge device pointer and number is going to change. It is not going to be kept individually per port, but in a common structure allocated dynamically and which will have lockdep validation. Create helpers to access these elements so that we have a migration path to the new organization. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-06 16:57:52 +00:00
if (br_vlan_enabled(br) &&
net: dsa: Deny enslaving VLAN devices into VLAN aware bridge VLAN devices on top of a DSA network device which is already part of a bridge and with said bridge being VLAN aware should not be allowed to be enslaved into that bridge. For one, this duplicates functionality offered by the VLAN aware bridge which supports tagged and untagged VLAN frames processing and it would make things needlessly complex to e.g.: propagate FDB/MDB accordingly. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-20 22:35:38 +00:00
netif_is_bridge_master(info->upper_dev) && info->linking) {
NL_SET_ERR_MSG_MOD(ext_ack,
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
"Cannot make VLAN device join VLAN-aware bridge");
net: dsa: Deny enslaving VLAN devices into VLAN aware bridge VLAN devices on top of a DSA network device which is already part of a bridge and with said bridge being VLAN aware should not be allowed to be enslaved into that bridge. For one, this duplicates functionality offered by the VLAN aware bridge which supports tagged and untagged VLAN frames processing and it would make things needlessly complex to e.g.: propagate FDB/MDB accordingly. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-20 22:35:38 +00:00
return notifier_from_errno(-EINVAL);
}
return NOTIFY_DONE;
}
net: dsa: convert check for 802.1Q upper when bridged into PRECHANGEUPPER DSA tries to prevent having a VLAN added by a bridge and by an 802.1Q upper at the same time. It does that by checking the VID in .ndo_vlan_rx_add_vid(), since that's something that the 8021q module calls, via vlan_vid_add(). When a VLAN matches in both subsystems, this check returns -EBUSY. However the vlan_vid_add() function isn't specific to the 8021q module in any way at all. It is simply the kernel's way to tell an interface to add a VLAN to its RX filter and not drop that VLAN. So there's no reason to return -EBUSY when somebody tries to call vlan_vid_add() for a VLAN that was installed by the bridge. The proper behavior is to accept that configuration. So what's wrong is how DSA checks that it has an 8021q upper. It should look at the actual uppers for that, not just assume that the 8021q module was somewhere in the call stack of .ndo_vlan_rx_add_vid(). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21 00:10:25 +00:00
static int
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dsa_user_check_8021q_upper(struct net_device *dev,
struct netdev_notifier_changeupper_info *info)
net: dsa: convert check for 802.1Q upper when bridged into PRECHANGEUPPER DSA tries to prevent having a VLAN added by a bridge and by an 802.1Q upper at the same time. It does that by checking the VID in .ndo_vlan_rx_add_vid(), since that's something that the 8021q module calls, via vlan_vid_add(). When a VLAN matches in both subsystems, this check returns -EBUSY. However the vlan_vid_add() function isn't specific to the 8021q module in any way at all. It is simply the kernel's way to tell an interface to add a VLAN to its RX filter and not drop that VLAN. So there's no reason to return -EBUSY when somebody tries to call vlan_vid_add() for a VLAN that was installed by the bridge. The proper behavior is to accept that configuration. So what's wrong is how DSA checks that it has an 8021q upper. It should look at the actual uppers for that, not just assume that the 8021q module was somewhere in the call stack of .ndo_vlan_rx_add_vid(). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21 00:10:25 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: hide dp->bridge_dev and dp->bridge_num in the core behind helpers The location of the bridge device pointer and number is going to change. It is not going to be kept individually per port, but in a common structure allocated dynamically and which will have lockdep validation. Create helpers to access these elements so that we have a migration path to the new organization. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-06 16:57:52 +00:00
struct net_device *br = dsa_port_bridge_dev_get(dp);
net: dsa: convert check for 802.1Q upper when bridged into PRECHANGEUPPER DSA tries to prevent having a VLAN added by a bridge and by an 802.1Q upper at the same time. It does that by checking the VID in .ndo_vlan_rx_add_vid(), since that's something that the 8021q module calls, via vlan_vid_add(). When a VLAN matches in both subsystems, this check returns -EBUSY. However the vlan_vid_add() function isn't specific to the 8021q module in any way at all. It is simply the kernel's way to tell an interface to add a VLAN to its RX filter and not drop that VLAN. So there's no reason to return -EBUSY when somebody tries to call vlan_vid_add() for a VLAN that was installed by the bridge. The proper behavior is to accept that configuration. So what's wrong is how DSA checks that it has an 8021q upper. It should look at the actual uppers for that, not just assume that the 8021q module was somewhere in the call stack of .ndo_vlan_rx_add_vid(). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21 00:10:25 +00:00
struct bridge_vlan_info br_info;
struct netlink_ext_ack *extack;
int err = NOTIFY_DONE;
u16 vid;
net: dsa: allow 8021q uppers while the bridge has vlan_filtering=0 When the bridge has VLAN awareness disabled there isn't any duplication of functionality, since the bridge does not process VLAN. Don't deny adding 8021q uppers to DSA switch ports in that case. The switch is supposed to simply pass traffic leaving the VLAN tag as-is, and the stack will happily strip the VLAN tag for all 8021q uppers that exist. We need to ensure that there are no 8021q uppers when the user attempts to enable bridge vlan_filtering. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21 00:10:28 +00:00
if (!br || !br_vlan_enabled(br))
net: dsa: convert check for 802.1Q upper when bridged into PRECHANGEUPPER DSA tries to prevent having a VLAN added by a bridge and by an 802.1Q upper at the same time. It does that by checking the VID in .ndo_vlan_rx_add_vid(), since that's something that the 8021q module calls, via vlan_vid_add(). When a VLAN matches in both subsystems, this check returns -EBUSY. However the vlan_vid_add() function isn't specific to the 8021q module in any way at all. It is simply the kernel's way to tell an interface to add a VLAN to its RX filter and not drop that VLAN. So there's no reason to return -EBUSY when somebody tries to call vlan_vid_add() for a VLAN that was installed by the bridge. The proper behavior is to accept that configuration. So what's wrong is how DSA checks that it has an 8021q upper. It should look at the actual uppers for that, not just assume that the 8021q module was somewhere in the call stack of .ndo_vlan_rx_add_vid(). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21 00:10:25 +00:00
return NOTIFY_DONE;
extack = netdev_notifier_info_to_extack(&info->info);
vid = vlan_dev_vlan_id(info->upper_dev);
/* br_vlan_get_info() returns -EINVAL or -ENOENT if the
* device, respectively the VID is not found, returning
* 0 means success, which is a failure for us here.
*/
err = br_vlan_get_info(br, vid, &br_info);
if (err == 0) {
NL_SET_ERR_MSG_MOD(extack,
"This VLAN is already configured by the bridge");
return notifier_from_errno(-EBUSY);
}
return NOTIFY_DONE;
}
net: dsa: refactor the prechangeupper sanity checks into a dedicated function We need to add more logic to the DSA NETDEV_PRECHANGEUPPER event handler, more exactly we need to request an unsync of switchdev objects. In order to fit more code, refactor the existing logic into a helper. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-27 11:54:28 +00:00
static int
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dsa_user_prechangeupper_sanity_check(struct net_device *dev,
struct netdev_notifier_changeupper_info *info)
net: dsa: refactor the prechangeupper sanity checks into a dedicated function We need to add more logic to the DSA NETDEV_PRECHANGEUPPER event handler, more exactly we need to request an unsync of switchdev objects. In order to fit more code, refactor the existing logic into a helper. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-27 11:54:28 +00:00
{
struct dsa_switch *ds;
struct dsa_port *dp;
int err;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
if (!dsa_user_dev_check(dev))
net: dsa: refactor the prechangeupper sanity checks into a dedicated function We need to add more logic to the DSA NETDEV_PRECHANGEUPPER event handler, more exactly we need to request an unsync of switchdev objects. In order to fit more code, refactor the existing logic into a helper. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-27 11:54:28 +00:00
return dsa_prevent_bridging_8021q_upper(dev, info);
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dp = dsa_user_to_port(dev);
net: dsa: refactor the prechangeupper sanity checks into a dedicated function We need to add more logic to the DSA NETDEV_PRECHANGEUPPER event handler, more exactly we need to request an unsync of switchdev objects. In order to fit more code, refactor the existing logic into a helper. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-27 11:54:28 +00:00
ds = dp->ds;
if (ds->ops->port_prechangeupper) {
err = ds->ops->port_prechangeupper(ds, dp->index, info);
if (err)
return notifier_from_errno(err);
}
if (is_vlan_dev(info->upper_dev))
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
return dsa_user_check_8021q_upper(dev, info);
net: dsa: refactor the prechangeupper sanity checks into a dedicated function We need to add more logic to the DSA NETDEV_PRECHANGEUPPER event handler, more exactly we need to request an unsync of switchdev objects. In order to fit more code, refactor the existing logic into a helper. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-27 11:54:28 +00:00
return NOTIFY_DONE;
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
/* To be eligible as a DSA conduit, a LAG must have all lower interfaces be
* eligible DSA conduits. Additionally, all LAG slaves must be DSA conduits of
net: dsa: allow masters to join a LAG There are 2 ways in which a DSA user port may become handled by 2 CPU ports in a LAG: (1) its current DSA master joins a LAG ip link del bond0 && ip link add bond0 type bond mode 802.3ad ip link set eno2 master bond0 When this happens, all user ports with "eno2" as DSA master get automatically migrated to "bond0" as DSA master. (2) it is explicitly configured as such by the user # Before, the DSA master was eno3 ip link set swp0 type dsa master bond0 The design of this configuration is that the LAG device dynamically becomes a DSA master through dsa_master_setup() when the first physical DSA master becomes a LAG slave, and stops being so through dsa_master_teardown() when the last physical DSA master leaves. A LAG interface is considered as a valid DSA master only if it contains existing DSA masters, and no other lower interfaces. Therefore, we mainly rely on method (1) to enter this configuration. Each physical DSA master (LAG slave) retains its dev->dsa_ptr for when it becomes a standalone DSA master again. But the LAG master also has a dev->dsa_ptr, and this is actually duplicated from one of the physical LAG slaves, and therefore needs to be balanced when LAG slaves come and go. To the switch driver, putting DSA masters in a LAG is seen as putting their associated CPU ports in a LAG. We need to prepare cross-chip host FDB notifiers for CPU ports in a LAG, by calling the driver's ->lag_fdb_add method rather than ->port_fdb_add. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:07:04 +00:00
* switches in the same switch tree.
*/
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_lag_conduit_validate(struct net_device *lag_dev,
struct netlink_ext_ack *extack)
net: dsa: allow masters to join a LAG There are 2 ways in which a DSA user port may become handled by 2 CPU ports in a LAG: (1) its current DSA master joins a LAG ip link del bond0 && ip link add bond0 type bond mode 802.3ad ip link set eno2 master bond0 When this happens, all user ports with "eno2" as DSA master get automatically migrated to "bond0" as DSA master. (2) it is explicitly configured as such by the user # Before, the DSA master was eno3 ip link set swp0 type dsa master bond0 The design of this configuration is that the LAG device dynamically becomes a DSA master through dsa_master_setup() when the first physical DSA master becomes a LAG slave, and stops being so through dsa_master_teardown() when the last physical DSA master leaves. A LAG interface is considered as a valid DSA master only if it contains existing DSA masters, and no other lower interfaces. Therefore, we mainly rely on method (1) to enter this configuration. Each physical DSA master (LAG slave) retains its dev->dsa_ptr for when it becomes a standalone DSA master again. But the LAG master also has a dev->dsa_ptr, and this is actually duplicated from one of the physical LAG slaves, and therefore needs to be balanced when LAG slaves come and go. To the switch driver, putting DSA masters in a LAG is seen as putting their associated CPU ports in a LAG. We need to prepare cross-chip host FDB notifiers for CPU ports in a LAG, by calling the driver's ->lag_fdb_add method rather than ->port_fdb_add. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:07:04 +00:00
{
struct net_device *lower1, *lower2;
struct list_head *iter1, *iter2;
netdev_for_each_lower_dev(lag_dev, lower1, iter1) {
netdev_for_each_lower_dev(lag_dev, lower2, iter2) {
if (!netdev_uses_dsa(lower1) ||
!netdev_uses_dsa(lower2)) {
NL_SET_ERR_MSG_MOD(extack,
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
"All LAG ports must be eligible as DSA conduits");
net: dsa: allow masters to join a LAG There are 2 ways in which a DSA user port may become handled by 2 CPU ports in a LAG: (1) its current DSA master joins a LAG ip link del bond0 && ip link add bond0 type bond mode 802.3ad ip link set eno2 master bond0 When this happens, all user ports with "eno2" as DSA master get automatically migrated to "bond0" as DSA master. (2) it is explicitly configured as such by the user # Before, the DSA master was eno3 ip link set swp0 type dsa master bond0 The design of this configuration is that the LAG device dynamically becomes a DSA master through dsa_master_setup() when the first physical DSA master becomes a LAG slave, and stops being so through dsa_master_teardown() when the last physical DSA master leaves. A LAG interface is considered as a valid DSA master only if it contains existing DSA masters, and no other lower interfaces. Therefore, we mainly rely on method (1) to enter this configuration. Each physical DSA master (LAG slave) retains its dev->dsa_ptr for when it becomes a standalone DSA master again. But the LAG master also has a dev->dsa_ptr, and this is actually duplicated from one of the physical LAG slaves, and therefore needs to be balanced when LAG slaves come and go. To the switch driver, putting DSA masters in a LAG is seen as putting their associated CPU ports in a LAG. We need to prepare cross-chip host FDB notifiers for CPU ports in a LAG, by calling the driver's ->lag_fdb_add method rather than ->port_fdb_add. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:07:04 +00:00
return notifier_from_errno(-EINVAL);
}
if (lower1 == lower2)
continue;
if (!dsa_port_tree_same(lower1->dsa_ptr,
lower2->dsa_ptr)) {
NL_SET_ERR_MSG_MOD(extack,
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
"LAG contains DSA conduits of disjoint switch trees");
net: dsa: allow masters to join a LAG There are 2 ways in which a DSA user port may become handled by 2 CPU ports in a LAG: (1) its current DSA master joins a LAG ip link del bond0 && ip link add bond0 type bond mode 802.3ad ip link set eno2 master bond0 When this happens, all user ports with "eno2" as DSA master get automatically migrated to "bond0" as DSA master. (2) it is explicitly configured as such by the user # Before, the DSA master was eno3 ip link set swp0 type dsa master bond0 The design of this configuration is that the LAG device dynamically becomes a DSA master through dsa_master_setup() when the first physical DSA master becomes a LAG slave, and stops being so through dsa_master_teardown() when the last physical DSA master leaves. A LAG interface is considered as a valid DSA master only if it contains existing DSA masters, and no other lower interfaces. Therefore, we mainly rely on method (1) to enter this configuration. Each physical DSA master (LAG slave) retains its dev->dsa_ptr for when it becomes a standalone DSA master again. But the LAG master also has a dev->dsa_ptr, and this is actually duplicated from one of the physical LAG slaves, and therefore needs to be balanced when LAG slaves come and go. To the switch driver, putting DSA masters in a LAG is seen as putting their associated CPU ports in a LAG. We need to prepare cross-chip host FDB notifiers for CPU ports in a LAG, by calling the driver's ->lag_fdb_add method rather than ->port_fdb_add. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:07:04 +00:00
return notifier_from_errno(-EINVAL);
}
}
}
return NOTIFY_DONE;
}
net: dsa: existing DSA masters cannot join upper interfaces All the traffic to/from a DSA master is supposed to be distributed among its DSA switch upper interfaces, so we should not allow other upper device kinds. An exception to this is DSA_TAG_PROTO_NONE (switches with no DSA tags), and in that case it is actually expected to create e.g. VLAN interfaces on the master. But for those, netdev_uses_dsa(master) returns false, so the restriction doesn't apply. The motivation for this change is to allow LAG interfaces of DSA masters to be DSA masters themselves. We want to restrict the user's degrees of freedom by 1: the LAG should already have all DSA masters as lowers, and while lower ports of the LAG can be removed, none can be added after the fact. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-19 17:48:15 +00:00
static int
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dsa_conduit_prechangeupper_sanity_check(struct net_device *conduit,
struct netdev_notifier_changeupper_info *info)
net: dsa: existing DSA masters cannot join upper interfaces All the traffic to/from a DSA master is supposed to be distributed among its DSA switch upper interfaces, so we should not allow other upper device kinds. An exception to this is DSA_TAG_PROTO_NONE (switches with no DSA tags), and in that case it is actually expected to create e.g. VLAN interfaces on the master. But for those, netdev_uses_dsa(master) returns false, so the restriction doesn't apply. The motivation for this change is to allow LAG interfaces of DSA masters to be DSA masters themselves. We want to restrict the user's degrees of freedom by 1: the LAG should already have all DSA masters as lowers, and while lower ports of the LAG can be removed, none can be added after the fact. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-19 17:48:15 +00:00
{
net: dsa: allow masters to join a LAG There are 2 ways in which a DSA user port may become handled by 2 CPU ports in a LAG: (1) its current DSA master joins a LAG ip link del bond0 && ip link add bond0 type bond mode 802.3ad ip link set eno2 master bond0 When this happens, all user ports with "eno2" as DSA master get automatically migrated to "bond0" as DSA master. (2) it is explicitly configured as such by the user # Before, the DSA master was eno3 ip link set swp0 type dsa master bond0 The design of this configuration is that the LAG device dynamically becomes a DSA master through dsa_master_setup() when the first physical DSA master becomes a LAG slave, and stops being so through dsa_master_teardown() when the last physical DSA master leaves. A LAG interface is considered as a valid DSA master only if it contains existing DSA masters, and no other lower interfaces. Therefore, we mainly rely on method (1) to enter this configuration. Each physical DSA master (LAG slave) retains its dev->dsa_ptr for when it becomes a standalone DSA master again. But the LAG master also has a dev->dsa_ptr, and this is actually duplicated from one of the physical LAG slaves, and therefore needs to be balanced when LAG slaves come and go. To the switch driver, putting DSA masters in a LAG is seen as putting their associated CPU ports in a LAG. We need to prepare cross-chip host FDB notifiers for CPU ports in a LAG, by calling the driver's ->lag_fdb_add method rather than ->port_fdb_add. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:07:04 +00:00
struct netlink_ext_ack *extack = netdev_notifier_info_to_extack(&info->info);
net: dsa: existing DSA masters cannot join upper interfaces All the traffic to/from a DSA master is supposed to be distributed among its DSA switch upper interfaces, so we should not allow other upper device kinds. An exception to this is DSA_TAG_PROTO_NONE (switches with no DSA tags), and in that case it is actually expected to create e.g. VLAN interfaces on the master. But for those, netdev_uses_dsa(master) returns false, so the restriction doesn't apply. The motivation for this change is to allow LAG interfaces of DSA masters to be DSA masters themselves. We want to restrict the user's degrees of freedom by 1: the LAG should already have all DSA masters as lowers, and while lower ports of the LAG can be removed, none can be added after the fact. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-19 17:48:15 +00:00
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
if (!netdev_uses_dsa(conduit))
net: dsa: existing DSA masters cannot join upper interfaces All the traffic to/from a DSA master is supposed to be distributed among its DSA switch upper interfaces, so we should not allow other upper device kinds. An exception to this is DSA_TAG_PROTO_NONE (switches with no DSA tags), and in that case it is actually expected to create e.g. VLAN interfaces on the master. But for those, netdev_uses_dsa(master) returns false, so the restriction doesn't apply. The motivation for this change is to allow LAG interfaces of DSA masters to be DSA masters themselves. We want to restrict the user's degrees of freedom by 1: the LAG should already have all DSA masters as lowers, and while lower ports of the LAG can be removed, none can be added after the fact. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-19 17:48:15 +00:00
return NOTIFY_DONE;
if (!info->linking)
return NOTIFY_DONE;
/* Allow DSA switch uppers */
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
if (dsa_user_dev_check(info->upper_dev))
net: dsa: existing DSA masters cannot join upper interfaces All the traffic to/from a DSA master is supposed to be distributed among its DSA switch upper interfaces, so we should not allow other upper device kinds. An exception to this is DSA_TAG_PROTO_NONE (switches with no DSA tags), and in that case it is actually expected to create e.g. VLAN interfaces on the master. But for those, netdev_uses_dsa(master) returns false, so the restriction doesn't apply. The motivation for this change is to allow LAG interfaces of DSA masters to be DSA masters themselves. We want to restrict the user's degrees of freedom by 1: the LAG should already have all DSA masters as lowers, and while lower ports of the LAG can be removed, none can be added after the fact. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-19 17:48:15 +00:00
return NOTIFY_DONE;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
/* Allow bridge uppers of DSA conduits, subject to further
net: dsa: existing DSA masters cannot join upper interfaces All the traffic to/from a DSA master is supposed to be distributed among its DSA switch upper interfaces, so we should not allow other upper device kinds. An exception to this is DSA_TAG_PROTO_NONE (switches with no DSA tags), and in that case it is actually expected to create e.g. VLAN interfaces on the master. But for those, netdev_uses_dsa(master) returns false, so the restriction doesn't apply. The motivation for this change is to allow LAG interfaces of DSA masters to be DSA masters themselves. We want to restrict the user's degrees of freedom by 1: the LAG should already have all DSA masters as lowers, and while lower ports of the LAG can be removed, none can be added after the fact. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-19 17:48:15 +00:00
* restrictions in dsa_bridge_prechangelower_sanity_check()
*/
if (netif_is_bridge_master(info->upper_dev))
return NOTIFY_DONE;
net: dsa: allow masters to join a LAG There are 2 ways in which a DSA user port may become handled by 2 CPU ports in a LAG: (1) its current DSA master joins a LAG ip link del bond0 && ip link add bond0 type bond mode 802.3ad ip link set eno2 master bond0 When this happens, all user ports with "eno2" as DSA master get automatically migrated to "bond0" as DSA master. (2) it is explicitly configured as such by the user # Before, the DSA master was eno3 ip link set swp0 type dsa master bond0 The design of this configuration is that the LAG device dynamically becomes a DSA master through dsa_master_setup() when the first physical DSA master becomes a LAG slave, and stops being so through dsa_master_teardown() when the last physical DSA master leaves. A LAG interface is considered as a valid DSA master only if it contains existing DSA masters, and no other lower interfaces. Therefore, we mainly rely on method (1) to enter this configuration. Each physical DSA master (LAG slave) retains its dev->dsa_ptr for when it becomes a standalone DSA master again. But the LAG master also has a dev->dsa_ptr, and this is actually duplicated from one of the physical LAG slaves, and therefore needs to be balanced when LAG slaves come and go. To the switch driver, putting DSA masters in a LAG is seen as putting their associated CPU ports in a LAG. We need to prepare cross-chip host FDB notifiers for CPU ports in a LAG, by calling the driver's ->lag_fdb_add method rather than ->port_fdb_add. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:07:04 +00:00
/* Allow LAG uppers, subject to further restrictions in
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
* dsa_lag_conduit_prechangelower_sanity_check()
net: dsa: allow masters to join a LAG There are 2 ways in which a DSA user port may become handled by 2 CPU ports in a LAG: (1) its current DSA master joins a LAG ip link del bond0 && ip link add bond0 type bond mode 802.3ad ip link set eno2 master bond0 When this happens, all user ports with "eno2" as DSA master get automatically migrated to "bond0" as DSA master. (2) it is explicitly configured as such by the user # Before, the DSA master was eno3 ip link set swp0 type dsa master bond0 The design of this configuration is that the LAG device dynamically becomes a DSA master through dsa_master_setup() when the first physical DSA master becomes a LAG slave, and stops being so through dsa_master_teardown() when the last physical DSA master leaves. A LAG interface is considered as a valid DSA master only if it contains existing DSA masters, and no other lower interfaces. Therefore, we mainly rely on method (1) to enter this configuration. Each physical DSA master (LAG slave) retains its dev->dsa_ptr for when it becomes a standalone DSA master again. But the LAG master also has a dev->dsa_ptr, and this is actually duplicated from one of the physical LAG slaves, and therefore needs to be balanced when LAG slaves come and go. To the switch driver, putting DSA masters in a LAG is seen as putting their associated CPU ports in a LAG. We need to prepare cross-chip host FDB notifiers for CPU ports in a LAG, by calling the driver's ->lag_fdb_add method rather than ->port_fdb_add. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:07:04 +00:00
*/
if (netif_is_lag_master(info->upper_dev))
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
return dsa_lag_conduit_validate(info->upper_dev, extack);
net: dsa: existing DSA masters cannot join upper interfaces All the traffic to/from a DSA master is supposed to be distributed among its DSA switch upper interfaces, so we should not allow other upper device kinds. An exception to this is DSA_TAG_PROTO_NONE (switches with no DSA tags), and in that case it is actually expected to create e.g. VLAN interfaces on the master. But for those, netdev_uses_dsa(master) returns false, so the restriction doesn't apply. The motivation for this change is to allow LAG interfaces of DSA masters to be DSA masters themselves. We want to restrict the user's degrees of freedom by 1: the LAG should already have all DSA masters as lowers, and while lower ports of the LAG can be removed, none can be added after the fact. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-19 17:48:15 +00:00
NL_SET_ERR_MSG_MOD(extack,
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
"DSA conduit cannot join unknown upper interfaces");
net: dsa: existing DSA masters cannot join upper interfaces All the traffic to/from a DSA master is supposed to be distributed among its DSA switch upper interfaces, so we should not allow other upper device kinds. An exception to this is DSA_TAG_PROTO_NONE (switches with no DSA tags), and in that case it is actually expected to create e.g. VLAN interfaces on the master. But for those, netdev_uses_dsa(master) returns false, so the restriction doesn't apply. The motivation for this change is to allow LAG interfaces of DSA masters to be DSA masters themselves. We want to restrict the user's degrees of freedom by 1: the LAG should already have all DSA masters as lowers, and while lower ports of the LAG can be removed, none can be added after the fact. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-19 17:48:15 +00:00
return notifier_from_errno(-EBUSY);
}
net: dsa: allow masters to join a LAG There are 2 ways in which a DSA user port may become handled by 2 CPU ports in a LAG: (1) its current DSA master joins a LAG ip link del bond0 && ip link add bond0 type bond mode 802.3ad ip link set eno2 master bond0 When this happens, all user ports with "eno2" as DSA master get automatically migrated to "bond0" as DSA master. (2) it is explicitly configured as such by the user # Before, the DSA master was eno3 ip link set swp0 type dsa master bond0 The design of this configuration is that the LAG device dynamically becomes a DSA master through dsa_master_setup() when the first physical DSA master becomes a LAG slave, and stops being so through dsa_master_teardown() when the last physical DSA master leaves. A LAG interface is considered as a valid DSA master only if it contains existing DSA masters, and no other lower interfaces. Therefore, we mainly rely on method (1) to enter this configuration. Each physical DSA master (LAG slave) retains its dev->dsa_ptr for when it becomes a standalone DSA master again. But the LAG master also has a dev->dsa_ptr, and this is actually duplicated from one of the physical LAG slaves, and therefore needs to be balanced when LAG slaves come and go. To the switch driver, putting DSA masters in a LAG is seen as putting their associated CPU ports in a LAG. We need to prepare cross-chip host FDB notifiers for CPU ports in a LAG, by calling the driver's ->lag_fdb_add method rather than ->port_fdb_add. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:07:04 +00:00
static int
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dsa_lag_conduit_prechangelower_sanity_check(struct net_device *dev,
struct netdev_notifier_changeupper_info *info)
net: dsa: allow masters to join a LAG There are 2 ways in which a DSA user port may become handled by 2 CPU ports in a LAG: (1) its current DSA master joins a LAG ip link del bond0 && ip link add bond0 type bond mode 802.3ad ip link set eno2 master bond0 When this happens, all user ports with "eno2" as DSA master get automatically migrated to "bond0" as DSA master. (2) it is explicitly configured as such by the user # Before, the DSA master was eno3 ip link set swp0 type dsa master bond0 The design of this configuration is that the LAG device dynamically becomes a DSA master through dsa_master_setup() when the first physical DSA master becomes a LAG slave, and stops being so through dsa_master_teardown() when the last physical DSA master leaves. A LAG interface is considered as a valid DSA master only if it contains existing DSA masters, and no other lower interfaces. Therefore, we mainly rely on method (1) to enter this configuration. Each physical DSA master (LAG slave) retains its dev->dsa_ptr for when it becomes a standalone DSA master again. But the LAG master also has a dev->dsa_ptr, and this is actually duplicated from one of the physical LAG slaves, and therefore needs to be balanced when LAG slaves come and go. To the switch driver, putting DSA masters in a LAG is seen as putting their associated CPU ports in a LAG. We need to prepare cross-chip host FDB notifiers for CPU ports in a LAG, by calling the driver's ->lag_fdb_add method rather than ->port_fdb_add. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:07:04 +00:00
{
struct netlink_ext_ack *extack = netdev_notifier_info_to_extack(&info->info);
struct net_device *lag_dev = info->upper_dev;
struct net_device *lower;
struct list_head *iter;
if (!netdev_uses_dsa(lag_dev) || !netif_is_lag_master(lag_dev))
return NOTIFY_DONE;
if (!info->linking)
return NOTIFY_DONE;
if (!netdev_uses_dsa(dev)) {
NL_SET_ERR_MSG(extack,
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
"Only DSA conduits can join a LAG DSA conduit");
net: dsa: allow masters to join a LAG There are 2 ways in which a DSA user port may become handled by 2 CPU ports in a LAG: (1) its current DSA master joins a LAG ip link del bond0 && ip link add bond0 type bond mode 802.3ad ip link set eno2 master bond0 When this happens, all user ports with "eno2" as DSA master get automatically migrated to "bond0" as DSA master. (2) it is explicitly configured as such by the user # Before, the DSA master was eno3 ip link set swp0 type dsa master bond0 The design of this configuration is that the LAG device dynamically becomes a DSA master through dsa_master_setup() when the first physical DSA master becomes a LAG slave, and stops being so through dsa_master_teardown() when the last physical DSA master leaves. A LAG interface is considered as a valid DSA master only if it contains existing DSA masters, and no other lower interfaces. Therefore, we mainly rely on method (1) to enter this configuration. Each physical DSA master (LAG slave) retains its dev->dsa_ptr for when it becomes a standalone DSA master again. But the LAG master also has a dev->dsa_ptr, and this is actually duplicated from one of the physical LAG slaves, and therefore needs to be balanced when LAG slaves come and go. To the switch driver, putting DSA masters in a LAG is seen as putting their associated CPU ports in a LAG. We need to prepare cross-chip host FDB notifiers for CPU ports in a LAG, by calling the driver's ->lag_fdb_add method rather than ->port_fdb_add. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:07:04 +00:00
return notifier_from_errno(-EINVAL);
}
netdev_for_each_lower_dev(lag_dev, lower, iter) {
if (!dsa_port_tree_same(dev->dsa_ptr, lower->dsa_ptr)) {
NL_SET_ERR_MSG(extack,
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
"Interface is DSA conduit for a different switch tree than this LAG");
net: dsa: allow masters to join a LAG There are 2 ways in which a DSA user port may become handled by 2 CPU ports in a LAG: (1) its current DSA master joins a LAG ip link del bond0 && ip link add bond0 type bond mode 802.3ad ip link set eno2 master bond0 When this happens, all user ports with "eno2" as DSA master get automatically migrated to "bond0" as DSA master. (2) it is explicitly configured as such by the user # Before, the DSA master was eno3 ip link set swp0 type dsa master bond0 The design of this configuration is that the LAG device dynamically becomes a DSA master through dsa_master_setup() when the first physical DSA master becomes a LAG slave, and stops being so through dsa_master_teardown() when the last physical DSA master leaves. A LAG interface is considered as a valid DSA master only if it contains existing DSA masters, and no other lower interfaces. Therefore, we mainly rely on method (1) to enter this configuration. Each physical DSA master (LAG slave) retains its dev->dsa_ptr for when it becomes a standalone DSA master again. But the LAG master also has a dev->dsa_ptr, and this is actually duplicated from one of the physical LAG slaves, and therefore needs to be balanced when LAG slaves come and go. To the switch driver, putting DSA masters in a LAG is seen as putting their associated CPU ports in a LAG. We need to prepare cross-chip host FDB notifiers for CPU ports in a LAG, by calling the driver's ->lag_fdb_add method rather than ->port_fdb_add. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:07:04 +00:00
return notifier_from_errno(-EINVAL);
}
break;
}
return NOTIFY_DONE;
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
/* Don't allow bridging of DSA conduits, since the bridge layer rx_handler
net: bridge: move DSA master bridging restriction to DSA When DSA gains support for multiple CPU ports in a LAG, it will become mandatory to monitor the changeupper events for the DSA master. In fact, there are already some restrictions to be imposed in that area, namely that a DSA master cannot be a bridge port except in some special circumstances. Centralize the restrictions at the level of the DSA layer as a preliminary step. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-19 17:48:14 +00:00
* prevents the DSA fake ethertype handler to be invoked, so we don't get the
* chance to strip off and parse the DSA switch tag protocol header (the bridge
* layer just returns RX_HANDLER_CONSUMED, stopping RX processing for these
* frames).
* The only case where that would not be an issue is when bridging can already
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
* be offloaded, such as when the DSA conduit is itself a DSA or plain switchdev
net: bridge: move DSA master bridging restriction to DSA When DSA gains support for multiple CPU ports in a LAG, it will become mandatory to monitor the changeupper events for the DSA master. In fact, there are already some restrictions to be imposed in that area, namely that a DSA master cannot be a bridge port except in some special circumstances. Centralize the restrictions at the level of the DSA layer as a preliminary step. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-19 17:48:14 +00:00
* port, and is bridged only with other ports from the same hardware device.
*/
static int
dsa_bridge_prechangelower_sanity_check(struct net_device *new_lower,
struct netdev_notifier_changeupper_info *info)
{
struct net_device *br = info->upper_dev;
struct netlink_ext_ack *extack;
struct net_device *lower;
struct list_head *iter;
if (!netif_is_bridge_master(br))
return NOTIFY_DONE;
if (!info->linking)
return NOTIFY_DONE;
extack = netdev_notifier_info_to_extack(&info->info);
netdev_for_each_lower_dev(br, lower, iter) {
if (!netdev_uses_dsa(new_lower) && !netdev_uses_dsa(lower))
continue;
if (!netdev_port_same_parent_id(lower, new_lower)) {
NL_SET_ERR_MSG(extack,
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
"Cannot do software bridging with a DSA conduit");
net: bridge: move DSA master bridging restriction to DSA When DSA gains support for multiple CPU ports in a LAG, it will become mandatory to monitor the changeupper events for the DSA master. In fact, there are already some restrictions to be imposed in that area, namely that a DSA master cannot be a bridge port except in some special circumstances. Centralize the restrictions at the level of the DSA layer as a preliminary step. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-19 17:48:14 +00:00
return notifier_from_errno(-EINVAL);
}
}
return NOTIFY_DONE;
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static void dsa_tree_migrate_ports_from_lag_conduit(struct dsa_switch_tree *dst,
struct net_device *lag_dev)
net: dsa: allow masters to join a LAG There are 2 ways in which a DSA user port may become handled by 2 CPU ports in a LAG: (1) its current DSA master joins a LAG ip link del bond0 && ip link add bond0 type bond mode 802.3ad ip link set eno2 master bond0 When this happens, all user ports with "eno2" as DSA master get automatically migrated to "bond0" as DSA master. (2) it is explicitly configured as such by the user # Before, the DSA master was eno3 ip link set swp0 type dsa master bond0 The design of this configuration is that the LAG device dynamically becomes a DSA master through dsa_master_setup() when the first physical DSA master becomes a LAG slave, and stops being so through dsa_master_teardown() when the last physical DSA master leaves. A LAG interface is considered as a valid DSA master only if it contains existing DSA masters, and no other lower interfaces. Therefore, we mainly rely on method (1) to enter this configuration. Each physical DSA master (LAG slave) retains its dev->dsa_ptr for when it becomes a standalone DSA master again. But the LAG master also has a dev->dsa_ptr, and this is actually duplicated from one of the physical LAG slaves, and therefore needs to be balanced when LAG slaves come and go. To the switch driver, putting DSA masters in a LAG is seen as putting their associated CPU ports in a LAG. We need to prepare cross-chip host FDB notifiers for CPU ports in a LAG, by calling the driver's ->lag_fdb_add method rather than ->port_fdb_add. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:07:04 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct net_device *new_conduit = dsa_tree_find_first_conduit(dst);
net: dsa: allow masters to join a LAG There are 2 ways in which a DSA user port may become handled by 2 CPU ports in a LAG: (1) its current DSA master joins a LAG ip link del bond0 && ip link add bond0 type bond mode 802.3ad ip link set eno2 master bond0 When this happens, all user ports with "eno2" as DSA master get automatically migrated to "bond0" as DSA master. (2) it is explicitly configured as such by the user # Before, the DSA master was eno3 ip link set swp0 type dsa master bond0 The design of this configuration is that the LAG device dynamically becomes a DSA master through dsa_master_setup() when the first physical DSA master becomes a LAG slave, and stops being so through dsa_master_teardown() when the last physical DSA master leaves. A LAG interface is considered as a valid DSA master only if it contains existing DSA masters, and no other lower interfaces. Therefore, we mainly rely on method (1) to enter this configuration. Each physical DSA master (LAG slave) retains its dev->dsa_ptr for when it becomes a standalone DSA master again. But the LAG master also has a dev->dsa_ptr, and this is actually duplicated from one of the physical LAG slaves, and therefore needs to be balanced when LAG slaves come and go. To the switch driver, putting DSA masters in a LAG is seen as putting their associated CPU ports in a LAG. We need to prepare cross-chip host FDB notifiers for CPU ports in a LAG, by calling the driver's ->lag_fdb_add method rather than ->port_fdb_add. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:07:04 +00:00
struct dsa_port *dp;
int err;
dsa_tree_for_each_user_port(dp, dst) {
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
if (dsa_port_to_conduit(dp) != lag_dev)
net: dsa: allow masters to join a LAG There are 2 ways in which a DSA user port may become handled by 2 CPU ports in a LAG: (1) its current DSA master joins a LAG ip link del bond0 && ip link add bond0 type bond mode 802.3ad ip link set eno2 master bond0 When this happens, all user ports with "eno2" as DSA master get automatically migrated to "bond0" as DSA master. (2) it is explicitly configured as such by the user # Before, the DSA master was eno3 ip link set swp0 type dsa master bond0 The design of this configuration is that the LAG device dynamically becomes a DSA master through dsa_master_setup() when the first physical DSA master becomes a LAG slave, and stops being so through dsa_master_teardown() when the last physical DSA master leaves. A LAG interface is considered as a valid DSA master only if it contains existing DSA masters, and no other lower interfaces. Therefore, we mainly rely on method (1) to enter this configuration. Each physical DSA master (LAG slave) retains its dev->dsa_ptr for when it becomes a standalone DSA master again. But the LAG master also has a dev->dsa_ptr, and this is actually duplicated from one of the physical LAG slaves, and therefore needs to be balanced when LAG slaves come and go. To the switch driver, putting DSA masters in a LAG is seen as putting their associated CPU ports in a LAG. We need to prepare cross-chip host FDB notifiers for CPU ports in a LAG, by calling the driver's ->lag_fdb_add method rather than ->port_fdb_add. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:07:04 +00:00
continue;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
err = dsa_user_change_conduit(dp->user, new_conduit, NULL);
net: dsa: allow masters to join a LAG There are 2 ways in which a DSA user port may become handled by 2 CPU ports in a LAG: (1) its current DSA master joins a LAG ip link del bond0 && ip link add bond0 type bond mode 802.3ad ip link set eno2 master bond0 When this happens, all user ports with "eno2" as DSA master get automatically migrated to "bond0" as DSA master. (2) it is explicitly configured as such by the user # Before, the DSA master was eno3 ip link set swp0 type dsa master bond0 The design of this configuration is that the LAG device dynamically becomes a DSA master through dsa_master_setup() when the first physical DSA master becomes a LAG slave, and stops being so through dsa_master_teardown() when the last physical DSA master leaves. A LAG interface is considered as a valid DSA master only if it contains existing DSA masters, and no other lower interfaces. Therefore, we mainly rely on method (1) to enter this configuration. Each physical DSA master (LAG slave) retains its dev->dsa_ptr for when it becomes a standalone DSA master again. But the LAG master also has a dev->dsa_ptr, and this is actually duplicated from one of the physical LAG slaves, and therefore needs to be balanced when LAG slaves come and go. To the switch driver, putting DSA masters in a LAG is seen as putting their associated CPU ports in a LAG. We need to prepare cross-chip host FDB notifiers for CPU ports in a LAG, by calling the driver's ->lag_fdb_add method rather than ->port_fdb_add. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:07:04 +00:00
if (err) {
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
netdev_err(dp->user,
"failed to restore conduit to %s: %pe\n",
new_conduit->name, ERR_PTR(err));
net: dsa: allow masters to join a LAG There are 2 ways in which a DSA user port may become handled by 2 CPU ports in a LAG: (1) its current DSA master joins a LAG ip link del bond0 && ip link add bond0 type bond mode 802.3ad ip link set eno2 master bond0 When this happens, all user ports with "eno2" as DSA master get automatically migrated to "bond0" as DSA master. (2) it is explicitly configured as such by the user # Before, the DSA master was eno3 ip link set swp0 type dsa master bond0 The design of this configuration is that the LAG device dynamically becomes a DSA master through dsa_master_setup() when the first physical DSA master becomes a LAG slave, and stops being so through dsa_master_teardown() when the last physical DSA master leaves. A LAG interface is considered as a valid DSA master only if it contains existing DSA masters, and no other lower interfaces. Therefore, we mainly rely on method (1) to enter this configuration. Each physical DSA master (LAG slave) retains its dev->dsa_ptr for when it becomes a standalone DSA master again. But the LAG master also has a dev->dsa_ptr, and this is actually duplicated from one of the physical LAG slaves, and therefore needs to be balanced when LAG slaves come and go. To the switch driver, putting DSA masters in a LAG is seen as putting their associated CPU ports in a LAG. We need to prepare cross-chip host FDB notifiers for CPU ports in a LAG, by calling the driver's ->lag_fdb_add method rather than ->port_fdb_add. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:07:04 +00:00
}
}
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_conduit_lag_join(struct net_device *conduit,
struct net_device *lag_dev,
struct netdev_lag_upper_info *uinfo,
struct netlink_ext_ack *extack)
net: dsa: allow masters to join a LAG There are 2 ways in which a DSA user port may become handled by 2 CPU ports in a LAG: (1) its current DSA master joins a LAG ip link del bond0 && ip link add bond0 type bond mode 802.3ad ip link set eno2 master bond0 When this happens, all user ports with "eno2" as DSA master get automatically migrated to "bond0" as DSA master. (2) it is explicitly configured as such by the user # Before, the DSA master was eno3 ip link set swp0 type dsa master bond0 The design of this configuration is that the LAG device dynamically becomes a DSA master through dsa_master_setup() when the first physical DSA master becomes a LAG slave, and stops being so through dsa_master_teardown() when the last physical DSA master leaves. A LAG interface is considered as a valid DSA master only if it contains existing DSA masters, and no other lower interfaces. Therefore, we mainly rely on method (1) to enter this configuration. Each physical DSA master (LAG slave) retains its dev->dsa_ptr for when it becomes a standalone DSA master again. But the LAG master also has a dev->dsa_ptr, and this is actually duplicated from one of the physical LAG slaves, and therefore needs to be balanced when LAG slaves come and go. To the switch driver, putting DSA masters in a LAG is seen as putting their associated CPU ports in a LAG. We need to prepare cross-chip host FDB notifiers for CPU ports in a LAG, by calling the driver's ->lag_fdb_add method rather than ->port_fdb_add. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:07:04 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *cpu_dp = conduit->dsa_ptr;
net: dsa: allow masters to join a LAG There are 2 ways in which a DSA user port may become handled by 2 CPU ports in a LAG: (1) its current DSA master joins a LAG ip link del bond0 && ip link add bond0 type bond mode 802.3ad ip link set eno2 master bond0 When this happens, all user ports with "eno2" as DSA master get automatically migrated to "bond0" as DSA master. (2) it is explicitly configured as such by the user # Before, the DSA master was eno3 ip link set swp0 type dsa master bond0 The design of this configuration is that the LAG device dynamically becomes a DSA master through dsa_master_setup() when the first physical DSA master becomes a LAG slave, and stops being so through dsa_master_teardown() when the last physical DSA master leaves. A LAG interface is considered as a valid DSA master only if it contains existing DSA masters, and no other lower interfaces. Therefore, we mainly rely on method (1) to enter this configuration. Each physical DSA master (LAG slave) retains its dev->dsa_ptr for when it becomes a standalone DSA master again. But the LAG master also has a dev->dsa_ptr, and this is actually duplicated from one of the physical LAG slaves, and therefore needs to be balanced when LAG slaves come and go. To the switch driver, putting DSA masters in a LAG is seen as putting their associated CPU ports in a LAG. We need to prepare cross-chip host FDB notifiers for CPU ports in a LAG, by calling the driver's ->lag_fdb_add method rather than ->port_fdb_add. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:07:04 +00:00
struct dsa_switch_tree *dst = cpu_dp->dst;
struct dsa_port *dp;
int err;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
err = dsa_conduit_lag_setup(lag_dev, cpu_dp, uinfo, extack);
net: dsa: allow masters to join a LAG There are 2 ways in which a DSA user port may become handled by 2 CPU ports in a LAG: (1) its current DSA master joins a LAG ip link del bond0 && ip link add bond0 type bond mode 802.3ad ip link set eno2 master bond0 When this happens, all user ports with "eno2" as DSA master get automatically migrated to "bond0" as DSA master. (2) it is explicitly configured as such by the user # Before, the DSA master was eno3 ip link set swp0 type dsa master bond0 The design of this configuration is that the LAG device dynamically becomes a DSA master through dsa_master_setup() when the first physical DSA master becomes a LAG slave, and stops being so through dsa_master_teardown() when the last physical DSA master leaves. A LAG interface is considered as a valid DSA master only if it contains existing DSA masters, and no other lower interfaces. Therefore, we mainly rely on method (1) to enter this configuration. Each physical DSA master (LAG slave) retains its dev->dsa_ptr for when it becomes a standalone DSA master again. But the LAG master also has a dev->dsa_ptr, and this is actually duplicated from one of the physical LAG slaves, and therefore needs to be balanced when LAG slaves come and go. To the switch driver, putting DSA masters in a LAG is seen as putting their associated CPU ports in a LAG. We need to prepare cross-chip host FDB notifiers for CPU ports in a LAG, by calling the driver's ->lag_fdb_add method rather than ->port_fdb_add. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:07:04 +00:00
if (err)
return err;
dsa_tree_for_each_user_port(dp, dst) {
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
if (dsa_port_to_conduit(dp) != conduit)
net: dsa: allow masters to join a LAG There are 2 ways in which a DSA user port may become handled by 2 CPU ports in a LAG: (1) its current DSA master joins a LAG ip link del bond0 && ip link add bond0 type bond mode 802.3ad ip link set eno2 master bond0 When this happens, all user ports with "eno2" as DSA master get automatically migrated to "bond0" as DSA master. (2) it is explicitly configured as such by the user # Before, the DSA master was eno3 ip link set swp0 type dsa master bond0 The design of this configuration is that the LAG device dynamically becomes a DSA master through dsa_master_setup() when the first physical DSA master becomes a LAG slave, and stops being so through dsa_master_teardown() when the last physical DSA master leaves. A LAG interface is considered as a valid DSA master only if it contains existing DSA masters, and no other lower interfaces. Therefore, we mainly rely on method (1) to enter this configuration. Each physical DSA master (LAG slave) retains its dev->dsa_ptr for when it becomes a standalone DSA master again. But the LAG master also has a dev->dsa_ptr, and this is actually duplicated from one of the physical LAG slaves, and therefore needs to be balanced when LAG slaves come and go. To the switch driver, putting DSA masters in a LAG is seen as putting their associated CPU ports in a LAG. We need to prepare cross-chip host FDB notifiers for CPU ports in a LAG, by calling the driver's ->lag_fdb_add method rather than ->port_fdb_add. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:07:04 +00:00
continue;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
err = dsa_user_change_conduit(dp->user, lag_dev, extack);
net: dsa: allow masters to join a LAG There are 2 ways in which a DSA user port may become handled by 2 CPU ports in a LAG: (1) its current DSA master joins a LAG ip link del bond0 && ip link add bond0 type bond mode 802.3ad ip link set eno2 master bond0 When this happens, all user ports with "eno2" as DSA master get automatically migrated to "bond0" as DSA master. (2) it is explicitly configured as such by the user # Before, the DSA master was eno3 ip link set swp0 type dsa master bond0 The design of this configuration is that the LAG device dynamically becomes a DSA master through dsa_master_setup() when the first physical DSA master becomes a LAG slave, and stops being so through dsa_master_teardown() when the last physical DSA master leaves. A LAG interface is considered as a valid DSA master only if it contains existing DSA masters, and no other lower interfaces. Therefore, we mainly rely on method (1) to enter this configuration. Each physical DSA master (LAG slave) retains its dev->dsa_ptr for when it becomes a standalone DSA master again. But the LAG master also has a dev->dsa_ptr, and this is actually duplicated from one of the physical LAG slaves, and therefore needs to be balanced when LAG slaves come and go. To the switch driver, putting DSA masters in a LAG is seen as putting their associated CPU ports in a LAG. We need to prepare cross-chip host FDB notifiers for CPU ports in a LAG, by calling the driver's ->lag_fdb_add method rather than ->port_fdb_add. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:07:04 +00:00
if (err)
goto restore;
}
return 0;
restore:
dsa_tree_for_each_user_port_continue_reverse(dp, dst) {
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
if (dsa_port_to_conduit(dp) != lag_dev)
net: dsa: allow masters to join a LAG There are 2 ways in which a DSA user port may become handled by 2 CPU ports in a LAG: (1) its current DSA master joins a LAG ip link del bond0 && ip link add bond0 type bond mode 802.3ad ip link set eno2 master bond0 When this happens, all user ports with "eno2" as DSA master get automatically migrated to "bond0" as DSA master. (2) it is explicitly configured as such by the user # Before, the DSA master was eno3 ip link set swp0 type dsa master bond0 The design of this configuration is that the LAG device dynamically becomes a DSA master through dsa_master_setup() when the first physical DSA master becomes a LAG slave, and stops being so through dsa_master_teardown() when the last physical DSA master leaves. A LAG interface is considered as a valid DSA master only if it contains existing DSA masters, and no other lower interfaces. Therefore, we mainly rely on method (1) to enter this configuration. Each physical DSA master (LAG slave) retains its dev->dsa_ptr for when it becomes a standalone DSA master again. But the LAG master also has a dev->dsa_ptr, and this is actually duplicated from one of the physical LAG slaves, and therefore needs to be balanced when LAG slaves come and go. To the switch driver, putting DSA masters in a LAG is seen as putting their associated CPU ports in a LAG. We need to prepare cross-chip host FDB notifiers for CPU ports in a LAG, by calling the driver's ->lag_fdb_add method rather than ->port_fdb_add. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:07:04 +00:00
continue;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
err = dsa_user_change_conduit(dp->user, conduit, NULL);
net: dsa: allow masters to join a LAG There are 2 ways in which a DSA user port may become handled by 2 CPU ports in a LAG: (1) its current DSA master joins a LAG ip link del bond0 && ip link add bond0 type bond mode 802.3ad ip link set eno2 master bond0 When this happens, all user ports with "eno2" as DSA master get automatically migrated to "bond0" as DSA master. (2) it is explicitly configured as such by the user # Before, the DSA master was eno3 ip link set swp0 type dsa master bond0 The design of this configuration is that the LAG device dynamically becomes a DSA master through dsa_master_setup() when the first physical DSA master becomes a LAG slave, and stops being so through dsa_master_teardown() when the last physical DSA master leaves. A LAG interface is considered as a valid DSA master only if it contains existing DSA masters, and no other lower interfaces. Therefore, we mainly rely on method (1) to enter this configuration. Each physical DSA master (LAG slave) retains its dev->dsa_ptr for when it becomes a standalone DSA master again. But the LAG master also has a dev->dsa_ptr, and this is actually duplicated from one of the physical LAG slaves, and therefore needs to be balanced when LAG slaves come and go. To the switch driver, putting DSA masters in a LAG is seen as putting their associated CPU ports in a LAG. We need to prepare cross-chip host FDB notifiers for CPU ports in a LAG, by calling the driver's ->lag_fdb_add method rather than ->port_fdb_add. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:07:04 +00:00
if (err) {
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
netdev_err(dp->user,
"failed to restore conduit to %s: %pe\n",
conduit->name, ERR_PTR(err));
net: dsa: allow masters to join a LAG There are 2 ways in which a DSA user port may become handled by 2 CPU ports in a LAG: (1) its current DSA master joins a LAG ip link del bond0 && ip link add bond0 type bond mode 802.3ad ip link set eno2 master bond0 When this happens, all user ports with "eno2" as DSA master get automatically migrated to "bond0" as DSA master. (2) it is explicitly configured as such by the user # Before, the DSA master was eno3 ip link set swp0 type dsa master bond0 The design of this configuration is that the LAG device dynamically becomes a DSA master through dsa_master_setup() when the first physical DSA master becomes a LAG slave, and stops being so through dsa_master_teardown() when the last physical DSA master leaves. A LAG interface is considered as a valid DSA master only if it contains existing DSA masters, and no other lower interfaces. Therefore, we mainly rely on method (1) to enter this configuration. Each physical DSA master (LAG slave) retains its dev->dsa_ptr for when it becomes a standalone DSA master again. But the LAG master also has a dev->dsa_ptr, and this is actually duplicated from one of the physical LAG slaves, and therefore needs to be balanced when LAG slaves come and go. To the switch driver, putting DSA masters in a LAG is seen as putting their associated CPU ports in a LAG. We need to prepare cross-chip host FDB notifiers for CPU ports in a LAG, by calling the driver's ->lag_fdb_add method rather than ->port_fdb_add. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:07:04 +00:00
}
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dsa_conduit_lag_teardown(lag_dev, conduit->dsa_ptr);
net: dsa: allow masters to join a LAG There are 2 ways in which a DSA user port may become handled by 2 CPU ports in a LAG: (1) its current DSA master joins a LAG ip link del bond0 && ip link add bond0 type bond mode 802.3ad ip link set eno2 master bond0 When this happens, all user ports with "eno2" as DSA master get automatically migrated to "bond0" as DSA master. (2) it is explicitly configured as such by the user # Before, the DSA master was eno3 ip link set swp0 type dsa master bond0 The design of this configuration is that the LAG device dynamically becomes a DSA master through dsa_master_setup() when the first physical DSA master becomes a LAG slave, and stops being so through dsa_master_teardown() when the last physical DSA master leaves. A LAG interface is considered as a valid DSA master only if it contains existing DSA masters, and no other lower interfaces. Therefore, we mainly rely on method (1) to enter this configuration. Each physical DSA master (LAG slave) retains its dev->dsa_ptr for when it becomes a standalone DSA master again. But the LAG master also has a dev->dsa_ptr, and this is actually duplicated from one of the physical LAG slaves, and therefore needs to be balanced when LAG slaves come and go. To the switch driver, putting DSA masters in a LAG is seen as putting their associated CPU ports in a LAG. We need to prepare cross-chip host FDB notifiers for CPU ports in a LAG, by calling the driver's ->lag_fdb_add method rather than ->port_fdb_add. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:07:04 +00:00
return err;
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static void dsa_conduit_lag_leave(struct net_device *conduit,
struct net_device *lag_dev)
net: dsa: allow masters to join a LAG There are 2 ways in which a DSA user port may become handled by 2 CPU ports in a LAG: (1) its current DSA master joins a LAG ip link del bond0 && ip link add bond0 type bond mode 802.3ad ip link set eno2 master bond0 When this happens, all user ports with "eno2" as DSA master get automatically migrated to "bond0" as DSA master. (2) it is explicitly configured as such by the user # Before, the DSA master was eno3 ip link set swp0 type dsa master bond0 The design of this configuration is that the LAG device dynamically becomes a DSA master through dsa_master_setup() when the first physical DSA master becomes a LAG slave, and stops being so through dsa_master_teardown() when the last physical DSA master leaves. A LAG interface is considered as a valid DSA master only if it contains existing DSA masters, and no other lower interfaces. Therefore, we mainly rely on method (1) to enter this configuration. Each physical DSA master (LAG slave) retains its dev->dsa_ptr for when it becomes a standalone DSA master again. But the LAG master also has a dev->dsa_ptr, and this is actually duplicated from one of the physical LAG slaves, and therefore needs to be balanced when LAG slaves come and go. To the switch driver, putting DSA masters in a LAG is seen as putting their associated CPU ports in a LAG. We need to prepare cross-chip host FDB notifiers for CPU ports in a LAG, by calling the driver's ->lag_fdb_add method rather than ->port_fdb_add. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:07:04 +00:00
{
struct dsa_port *dp, *cpu_dp = lag_dev->dsa_ptr;
struct dsa_switch_tree *dst = cpu_dp->dst;
struct dsa_port *new_cpu_dp = NULL;
struct net_device *lower;
struct list_head *iter;
netdev_for_each_lower_dev(lag_dev, lower, iter) {
if (netdev_uses_dsa(lower)) {
new_cpu_dp = lower->dsa_ptr;
break;
}
}
if (new_cpu_dp) {
/* Update the CPU port of the user ports still under the LAG
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
* so that dsa_port_to_conduit() continues to work properly
net: dsa: allow masters to join a LAG There are 2 ways in which a DSA user port may become handled by 2 CPU ports in a LAG: (1) its current DSA master joins a LAG ip link del bond0 && ip link add bond0 type bond mode 802.3ad ip link set eno2 master bond0 When this happens, all user ports with "eno2" as DSA master get automatically migrated to "bond0" as DSA master. (2) it is explicitly configured as such by the user # Before, the DSA master was eno3 ip link set swp0 type dsa master bond0 The design of this configuration is that the LAG device dynamically becomes a DSA master through dsa_master_setup() when the first physical DSA master becomes a LAG slave, and stops being so through dsa_master_teardown() when the last physical DSA master leaves. A LAG interface is considered as a valid DSA master only if it contains existing DSA masters, and no other lower interfaces. Therefore, we mainly rely on method (1) to enter this configuration. Each physical DSA master (LAG slave) retains its dev->dsa_ptr for when it becomes a standalone DSA master again. But the LAG master also has a dev->dsa_ptr, and this is actually duplicated from one of the physical LAG slaves, and therefore needs to be balanced when LAG slaves come and go. To the switch driver, putting DSA masters in a LAG is seen as putting their associated CPU ports in a LAG. We need to prepare cross-chip host FDB notifiers for CPU ports in a LAG, by calling the driver's ->lag_fdb_add method rather than ->port_fdb_add. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:07:04 +00:00
*/
dsa_tree_for_each_user_port(dp, dst)
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
if (dsa_port_to_conduit(dp) == lag_dev)
net: dsa: allow masters to join a LAG There are 2 ways in which a DSA user port may become handled by 2 CPU ports in a LAG: (1) its current DSA master joins a LAG ip link del bond0 && ip link add bond0 type bond mode 802.3ad ip link set eno2 master bond0 When this happens, all user ports with "eno2" as DSA master get automatically migrated to "bond0" as DSA master. (2) it is explicitly configured as such by the user # Before, the DSA master was eno3 ip link set swp0 type dsa master bond0 The design of this configuration is that the LAG device dynamically becomes a DSA master through dsa_master_setup() when the first physical DSA master becomes a LAG slave, and stops being so through dsa_master_teardown() when the last physical DSA master leaves. A LAG interface is considered as a valid DSA master only if it contains existing DSA masters, and no other lower interfaces. Therefore, we mainly rely on method (1) to enter this configuration. Each physical DSA master (LAG slave) retains its dev->dsa_ptr for when it becomes a standalone DSA master again. But the LAG master also has a dev->dsa_ptr, and this is actually duplicated from one of the physical LAG slaves, and therefore needs to be balanced when LAG slaves come and go. To the switch driver, putting DSA masters in a LAG is seen as putting their associated CPU ports in a LAG. We need to prepare cross-chip host FDB notifiers for CPU ports in a LAG, by calling the driver's ->lag_fdb_add method rather than ->port_fdb_add. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:07:04 +00:00
dp->cpu_dp = new_cpu_dp;
/* Update the index of the virtual CPU port to match the lowest
* physical CPU port
*/
lag_dev->dsa_ptr = new_cpu_dp;
wmb();
} else {
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
/* If the LAG DSA conduit has no ports left, migrate back all
net: dsa: allow masters to join a LAG There are 2 ways in which a DSA user port may become handled by 2 CPU ports in a LAG: (1) its current DSA master joins a LAG ip link del bond0 && ip link add bond0 type bond mode 802.3ad ip link set eno2 master bond0 When this happens, all user ports with "eno2" as DSA master get automatically migrated to "bond0" as DSA master. (2) it is explicitly configured as such by the user # Before, the DSA master was eno3 ip link set swp0 type dsa master bond0 The design of this configuration is that the LAG device dynamically becomes a DSA master through dsa_master_setup() when the first physical DSA master becomes a LAG slave, and stops being so through dsa_master_teardown() when the last physical DSA master leaves. A LAG interface is considered as a valid DSA master only if it contains existing DSA masters, and no other lower interfaces. Therefore, we mainly rely on method (1) to enter this configuration. Each physical DSA master (LAG slave) retains its dev->dsa_ptr for when it becomes a standalone DSA master again. But the LAG master also has a dev->dsa_ptr, and this is actually duplicated from one of the physical LAG slaves, and therefore needs to be balanced when LAG slaves come and go. To the switch driver, putting DSA masters in a LAG is seen as putting their associated CPU ports in a LAG. We need to prepare cross-chip host FDB notifiers for CPU ports in a LAG, by calling the driver's ->lag_fdb_add method rather than ->port_fdb_add. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:07:04 +00:00
* user ports to the first physical CPU port
*/
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dsa_tree_migrate_ports_from_lag_conduit(dst, lag_dev);
net: dsa: allow masters to join a LAG There are 2 ways in which a DSA user port may become handled by 2 CPU ports in a LAG: (1) its current DSA master joins a LAG ip link del bond0 && ip link add bond0 type bond mode 802.3ad ip link set eno2 master bond0 When this happens, all user ports with "eno2" as DSA master get automatically migrated to "bond0" as DSA master. (2) it is explicitly configured as such by the user # Before, the DSA master was eno3 ip link set swp0 type dsa master bond0 The design of this configuration is that the LAG device dynamically becomes a DSA master through dsa_master_setup() when the first physical DSA master becomes a LAG slave, and stops being so through dsa_master_teardown() when the last physical DSA master leaves. A LAG interface is considered as a valid DSA master only if it contains existing DSA masters, and no other lower interfaces. Therefore, we mainly rely on method (1) to enter this configuration. Each physical DSA master (LAG slave) retains its dev->dsa_ptr for when it becomes a standalone DSA master again. But the LAG master also has a dev->dsa_ptr, and this is actually duplicated from one of the physical LAG slaves, and therefore needs to be balanced when LAG slaves come and go. To the switch driver, putting DSA masters in a LAG is seen as putting their associated CPU ports in a LAG. We need to prepare cross-chip host FDB notifiers for CPU ports in a LAG, by calling the driver's ->lag_fdb_add method rather than ->port_fdb_add. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:07:04 +00:00
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
/* This DSA conduit has left its LAG in any case, so let
net: dsa: allow masters to join a LAG There are 2 ways in which a DSA user port may become handled by 2 CPU ports in a LAG: (1) its current DSA master joins a LAG ip link del bond0 && ip link add bond0 type bond mode 802.3ad ip link set eno2 master bond0 When this happens, all user ports with "eno2" as DSA master get automatically migrated to "bond0" as DSA master. (2) it is explicitly configured as such by the user # Before, the DSA master was eno3 ip link set swp0 type dsa master bond0 The design of this configuration is that the LAG device dynamically becomes a DSA master through dsa_master_setup() when the first physical DSA master becomes a LAG slave, and stops being so through dsa_master_teardown() when the last physical DSA master leaves. A LAG interface is considered as a valid DSA master only if it contains existing DSA masters, and no other lower interfaces. Therefore, we mainly rely on method (1) to enter this configuration. Each physical DSA master (LAG slave) retains its dev->dsa_ptr for when it becomes a standalone DSA master again. But the LAG master also has a dev->dsa_ptr, and this is actually duplicated from one of the physical LAG slaves, and therefore needs to be balanced when LAG slaves come and go. To the switch driver, putting DSA masters in a LAG is seen as putting their associated CPU ports in a LAG. We need to prepare cross-chip host FDB notifiers for CPU ports in a LAG, by calling the driver's ->lag_fdb_add method rather than ->port_fdb_add. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:07:04 +00:00
* the CPU port leave the hardware LAG as well
*/
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dsa_conduit_lag_teardown(lag_dev, conduit->dsa_ptr);
net: dsa: allow masters to join a LAG There are 2 ways in which a DSA user port may become handled by 2 CPU ports in a LAG: (1) its current DSA master joins a LAG ip link del bond0 && ip link add bond0 type bond mode 802.3ad ip link set eno2 master bond0 When this happens, all user ports with "eno2" as DSA master get automatically migrated to "bond0" as DSA master. (2) it is explicitly configured as such by the user # Before, the DSA master was eno3 ip link set swp0 type dsa master bond0 The design of this configuration is that the LAG device dynamically becomes a DSA master through dsa_master_setup() when the first physical DSA master becomes a LAG slave, and stops being so through dsa_master_teardown() when the last physical DSA master leaves. A LAG interface is considered as a valid DSA master only if it contains existing DSA masters, and no other lower interfaces. Therefore, we mainly rely on method (1) to enter this configuration. Each physical DSA master (LAG slave) retains its dev->dsa_ptr for when it becomes a standalone DSA master again. But the LAG master also has a dev->dsa_ptr, and this is actually duplicated from one of the physical LAG slaves, and therefore needs to be balanced when LAG slaves come and go. To the switch driver, putting DSA masters in a LAG is seen as putting their associated CPU ports in a LAG. We need to prepare cross-chip host FDB notifiers for CPU ports in a LAG, by calling the driver's ->lag_fdb_add method rather than ->port_fdb_add. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:07:04 +00:00
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_conduit_changeupper(struct net_device *dev,
struct netdev_notifier_changeupper_info *info)
net: dsa: allow masters to join a LAG There are 2 ways in which a DSA user port may become handled by 2 CPU ports in a LAG: (1) its current DSA master joins a LAG ip link del bond0 && ip link add bond0 type bond mode 802.3ad ip link set eno2 master bond0 When this happens, all user ports with "eno2" as DSA master get automatically migrated to "bond0" as DSA master. (2) it is explicitly configured as such by the user # Before, the DSA master was eno3 ip link set swp0 type dsa master bond0 The design of this configuration is that the LAG device dynamically becomes a DSA master through dsa_master_setup() when the first physical DSA master becomes a LAG slave, and stops being so through dsa_master_teardown() when the last physical DSA master leaves. A LAG interface is considered as a valid DSA master only if it contains existing DSA masters, and no other lower interfaces. Therefore, we mainly rely on method (1) to enter this configuration. Each physical DSA master (LAG slave) retains its dev->dsa_ptr for when it becomes a standalone DSA master again. But the LAG master also has a dev->dsa_ptr, and this is actually duplicated from one of the physical LAG slaves, and therefore needs to be balanced when LAG slaves come and go. To the switch driver, putting DSA masters in a LAG is seen as putting their associated CPU ports in a LAG. We need to prepare cross-chip host FDB notifiers for CPU ports in a LAG, by calling the driver's ->lag_fdb_add method rather than ->port_fdb_add. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:07:04 +00:00
{
struct netlink_ext_ack *extack;
int err = NOTIFY_DONE;
if (!netdev_uses_dsa(dev))
return err;
extack = netdev_notifier_info_to_extack(&info->info);
if (netif_is_lag_master(info->upper_dev)) {
if (info->linking) {
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
err = dsa_conduit_lag_join(dev, info->upper_dev,
info->upper_info, extack);
net: dsa: allow masters to join a LAG There are 2 ways in which a DSA user port may become handled by 2 CPU ports in a LAG: (1) its current DSA master joins a LAG ip link del bond0 && ip link add bond0 type bond mode 802.3ad ip link set eno2 master bond0 When this happens, all user ports with "eno2" as DSA master get automatically migrated to "bond0" as DSA master. (2) it is explicitly configured as such by the user # Before, the DSA master was eno3 ip link set swp0 type dsa master bond0 The design of this configuration is that the LAG device dynamically becomes a DSA master through dsa_master_setup() when the first physical DSA master becomes a LAG slave, and stops being so through dsa_master_teardown() when the last physical DSA master leaves. A LAG interface is considered as a valid DSA master only if it contains existing DSA masters, and no other lower interfaces. Therefore, we mainly rely on method (1) to enter this configuration. Each physical DSA master (LAG slave) retains its dev->dsa_ptr for when it becomes a standalone DSA master again. But the LAG master also has a dev->dsa_ptr, and this is actually duplicated from one of the physical LAG slaves, and therefore needs to be balanced when LAG slaves come and go. To the switch driver, putting DSA masters in a LAG is seen as putting their associated CPU ports in a LAG. We need to prepare cross-chip host FDB notifiers for CPU ports in a LAG, by calling the driver's ->lag_fdb_add method rather than ->port_fdb_add. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:07:04 +00:00
err = notifier_from_errno(err);
} else {
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dsa_conduit_lag_leave(dev, info->upper_dev);
net: dsa: allow masters to join a LAG There are 2 ways in which a DSA user port may become handled by 2 CPU ports in a LAG: (1) its current DSA master joins a LAG ip link del bond0 && ip link add bond0 type bond mode 802.3ad ip link set eno2 master bond0 When this happens, all user ports with "eno2" as DSA master get automatically migrated to "bond0" as DSA master. (2) it is explicitly configured as such by the user # Before, the DSA master was eno3 ip link set swp0 type dsa master bond0 The design of this configuration is that the LAG device dynamically becomes a DSA master through dsa_master_setup() when the first physical DSA master becomes a LAG slave, and stops being so through dsa_master_teardown() when the last physical DSA master leaves. A LAG interface is considered as a valid DSA master only if it contains existing DSA masters, and no other lower interfaces. Therefore, we mainly rely on method (1) to enter this configuration. Each physical DSA master (LAG slave) retains its dev->dsa_ptr for when it becomes a standalone DSA master again. But the LAG master also has a dev->dsa_ptr, and this is actually duplicated from one of the physical LAG slaves, and therefore needs to be balanced when LAG slaves come and go. To the switch driver, putting DSA masters in a LAG is seen as putting their associated CPU ports in a LAG. We need to prepare cross-chip host FDB notifiers for CPU ports in a LAG, by calling the driver's ->lag_fdb_add method rather than ->port_fdb_add. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:07:04 +00:00
err = NOTIFY_OK;
}
}
return err;
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_netdevice_event(struct notifier_block *nb,
unsigned long event, void *ptr)
net: dsa: refine netdev event notifier Rework the netdev event handler, similar to what the Mellanox Spectrum driver does, to easily welcome more events later (for example NETDEV_PRECHANGEUPPER) and use netdev helpers (such as netif_is_bridge_master). Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-13 20:21:34 +00:00
{
struct net_device *dev = netdev_notifier_info_to_dev(ptr);
net: dsa: deny enslaving 802.1Q upper to VLAN-aware bridge from PRECHANGEUPPER There doesn't seem to be any strong technical reason for doing it this way, but we'll be adding more checks for invalid upper device configurations, and it will be easier to have them all grouped under PRECHANGEUPPER. Tested that it still works: ip link set br0 type bridge vlan_filtering 1 ip link add link swp2 name swp2.100 type vlan id 100 ip link set swp2.100 master br0 [ 20.321312] br0: port 5(swp2.100) entered blocking state [ 20.326711] br0: port 5(swp2.100) entered disabled state Error: dsa_core: Cannot enslave VLAN device into VLAN aware bridge. [ 20.346549] br0: port 5(swp2.100) entered blocking state [ 20.351957] br0: port 5(swp2.100) entered disabled state Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21 00:10:23 +00:00
switch (event) {
net: dsa: convert check for 802.1Q upper when bridged into PRECHANGEUPPER DSA tries to prevent having a VLAN added by a bridge and by an 802.1Q upper at the same time. It does that by checking the VID in .ndo_vlan_rx_add_vid(), since that's something that the 8021q module calls, via vlan_vid_add(). When a VLAN matches in both subsystems, this check returns -EBUSY. However the vlan_vid_add() function isn't specific to the 8021q module in any way at all. It is simply the kernel's way to tell an interface to add a VLAN to its RX filter and not drop that VLAN. So there's no reason to return -EBUSY when somebody tries to call vlan_vid_add() for a VLAN that was installed by the bridge. The proper behavior is to accept that configuration. So what's wrong is how DSA checks that it has an 8021q upper. It should look at the actual uppers for that, not just assume that the 8021q module was somewhere in the call stack of .ndo_vlan_rx_add_vid(). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21 00:10:25 +00:00
case NETDEV_PRECHANGEUPPER: {
struct netdev_notifier_changeupper_info *info = ptr;
net: dsa: Give drivers the chance to veto certain upper devices Some switches rely on unique pvids to ensure port separation in standalone mode, because they don't have a port forwarding matrix configurable in hardware. So, setups like a group of 2 uppers with the same VLAN, swp0.100 and swp1.100, will cause traffic tagged with VLAN 100 to be autonomously forwarded between these switch ports, in spite of there being no bridge between swp0 and swp1. These drivers need to prevent this from happening. They need to have VLAN filtering enabled in standalone mode (so they'll drop frames tagged with unknown VLANs) and they can only accept an 8021q upper on a port as long as it isn't installed on any other port too. So give them the chance to veto bad user requests. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> [Kurt: Pass info instead of ptr] Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-03 07:10:55 +00:00
int err;
net: dsa: convert check for 802.1Q upper when bridged into PRECHANGEUPPER DSA tries to prevent having a VLAN added by a bridge and by an 802.1Q upper at the same time. It does that by checking the VID in .ndo_vlan_rx_add_vid(), since that's something that the 8021q module calls, via vlan_vid_add(). When a VLAN matches in both subsystems, this check returns -EBUSY. However the vlan_vid_add() function isn't specific to the 8021q module in any way at all. It is simply the kernel's way to tell an interface to add a VLAN to its RX filter and not drop that VLAN. So there's no reason to return -EBUSY when somebody tries to call vlan_vid_add() for a VLAN that was installed by the bridge. The proper behavior is to accept that configuration. So what's wrong is how DSA checks that it has an 8021q upper. It should look at the actual uppers for that, not just assume that the 8021q module was somewhere in the call stack of .ndo_vlan_rx_add_vid(). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21 00:10:25 +00:00
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
err = dsa_user_prechangeupper_sanity_check(dev, info);
net: dsa: don't stop at NOTIFY_OK when calling ds->ops->port_prechangeupper dsa_slave_prechangeupper_sanity_check() is supposed to enforce some adjacency restrictions, and calls ds->ops->port_prechangeupper if the driver implements it. We convert the error code from the port_prechangeupper() call to a notifier code, and 0 is converted to NOTIFY_OK, but the caller of dsa_slave_prechangeupper_sanity_check() stops at any notifier code different from NOTIFY_DONE. Avoid this by converting back the notifier code to an error code, so that both NOTIFY_OK and NOTIFY_DONE will be seen as 0. This allows more parallel sanity check functions to be added. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-19 17:48:13 +00:00
if (notifier_to_errno(err))
net: dsa: refactor the prechangeupper sanity checks into a dedicated function We need to add more logic to the DSA NETDEV_PRECHANGEUPPER event handler, more exactly we need to request an unsync of switchdev objects. In order to fit more code, refactor the existing logic into a helper. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-27 11:54:28 +00:00
return err;
net: dsa: Give drivers the chance to veto certain upper devices Some switches rely on unique pvids to ensure port separation in standalone mode, because they don't have a port forwarding matrix configurable in hardware. So, setups like a group of 2 uppers with the same VLAN, swp0.100 and swp1.100, will cause traffic tagged with VLAN 100 to be autonomously forwarded between these switch ports, in spite of there being no bridge between swp0 and swp1. These drivers need to prevent this from happening. They need to have VLAN filtering enabled in standalone mode (so they'll drop frames tagged with unknown VLANs) and they can only accept an 8021q upper on a port as long as it isn't installed on any other port too. So give them the chance to veto bad user requests. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> [Kurt: Pass info instead of ptr] Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-03 07:10:55 +00:00
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
err = dsa_conduit_prechangeupper_sanity_check(dev, info);
net: dsa: existing DSA masters cannot join upper interfaces All the traffic to/from a DSA master is supposed to be distributed among its DSA switch upper interfaces, so we should not allow other upper device kinds. An exception to this is DSA_TAG_PROTO_NONE (switches with no DSA tags), and in that case it is actually expected to create e.g. VLAN interfaces on the master. But for those, netdev_uses_dsa(master) returns false, so the restriction doesn't apply. The motivation for this change is to allow LAG interfaces of DSA masters to be DSA masters themselves. We want to restrict the user's degrees of freedom by 1: the LAG should already have all DSA masters as lowers, and while lower ports of the LAG can be removed, none can be added after the fact. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-19 17:48:15 +00:00
if (notifier_to_errno(err))
return err;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
err = dsa_lag_conduit_prechangelower_sanity_check(dev, info);
net: dsa: allow masters to join a LAG There are 2 ways in which a DSA user port may become handled by 2 CPU ports in a LAG: (1) its current DSA master joins a LAG ip link del bond0 && ip link add bond0 type bond mode 802.3ad ip link set eno2 master bond0 When this happens, all user ports with "eno2" as DSA master get automatically migrated to "bond0" as DSA master. (2) it is explicitly configured as such by the user # Before, the DSA master was eno3 ip link set swp0 type dsa master bond0 The design of this configuration is that the LAG device dynamically becomes a DSA master through dsa_master_setup() when the first physical DSA master becomes a LAG slave, and stops being so through dsa_master_teardown() when the last physical DSA master leaves. A LAG interface is considered as a valid DSA master only if it contains existing DSA masters, and no other lower interfaces. Therefore, we mainly rely on method (1) to enter this configuration. Each physical DSA master (LAG slave) retains its dev->dsa_ptr for when it becomes a standalone DSA master again. But the LAG master also has a dev->dsa_ptr, and this is actually duplicated from one of the physical LAG slaves, and therefore needs to be balanced when LAG slaves come and go. To the switch driver, putting DSA masters in a LAG is seen as putting their associated CPU ports in a LAG. We need to prepare cross-chip host FDB notifiers for CPU ports in a LAG, by calling the driver's ->lag_fdb_add method rather than ->port_fdb_add. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:07:04 +00:00
if (notifier_to_errno(err))
return err;
net: bridge: move DSA master bridging restriction to DSA When DSA gains support for multiple CPU ports in a LAG, it will become mandatory to monitor the changeupper events for the DSA master. In fact, there are already some restrictions to be imposed in that area, namely that a DSA master cannot be a bridge port except in some special circumstances. Centralize the restrictions at the level of the DSA layer as a preliminary step. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-19 17:48:14 +00:00
err = dsa_bridge_prechangelower_sanity_check(dev, info);
if (notifier_to_errno(err))
return err;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
err = dsa_user_prechangeupper(dev, ptr);
net: dsa: walk through all changeupper notifier functions Traditionally, DSA has had a single netdev notifier handling function for each device type. For the sake of code cleanliness, we would like to introduce more handling functions which do one thing, but the conditions for entering these functions start to overlap. Example: a handling function which tracks whether any bridges contain both DSA and non-DSA interfaces. Either this is placed before dsa_slave_changeupper(), case in which it will prevent that function from executing, or we place it after dsa_slave_changeupper(), case in which we will prevent it from executing. The other alternative is to ignore errors from the new handling function (not ideal). To support this usage, we need to change the pattern. In the new model, we enter all notifier handling sub-functions, and exit with NOTIFY_DONE if there is nothing to do. This allows the sub-functions to be relatively free-form and independent from each other. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-19 17:48:12 +00:00
if (notifier_to_errno(err))
return err;
net: dsa: replay a deletion of switchdev objects for ports leaving a bridged LAG When a DSA switch port leaves a bonding interface that is under a bridge, there might be dangling switchdev objects on that port left behind, because the bridge is not aware that its lower interface (the bond) changed state in any way. Call the bridge replay helpers with adding=false before changing dp->bridge_dev to NULL, because we need to simulate to dsa_slave_port_obj_del() that these notifications were emitted by the bridge. We add this hook to the NETDEV_PRECHANGEUPPER event handler, because we are calling into switchdev (and the __switchdev_handle_port_obj_del fanout helpers expect the upper/lower adjacency lists to still be valid) and PRECHANGEUPPER is the last moment in time when they still are. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-27 11:54:29 +00:00
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
err = dsa_user_lag_prechangeupper(dev, ptr);
net: dsa: walk through all changeupper notifier functions Traditionally, DSA has had a single netdev notifier handling function for each device type. For the sake of code cleanliness, we would like to introduce more handling functions which do one thing, but the conditions for entering these functions start to overlap. Example: a handling function which tracks whether any bridges contain both DSA and non-DSA interfaces. Either this is placed before dsa_slave_changeupper(), case in which it will prevent that function from executing, or we place it after dsa_slave_changeupper(), case in which we will prevent it from executing. The other alternative is to ignore errors from the new handling function (not ideal). To support this usage, we need to change the pattern. In the new model, we enter all notifier handling sub-functions, and exit with NOTIFY_DONE if there is nothing to do. This allows the sub-functions to be relatively free-form and independent from each other. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-19 17:48:12 +00:00
if (notifier_to_errno(err))
return err;
net: dsa: replay a deletion of switchdev objects for ports leaving a bridged LAG When a DSA switch port leaves a bonding interface that is under a bridge, there might be dangling switchdev objects on that port left behind, because the bridge is not aware that its lower interface (the bond) changed state in any way. Call the bridge replay helpers with adding=false before changing dp->bridge_dev to NULL, because we need to simulate to dsa_slave_port_obj_del() that these notifications were emitted by the bridge. We add this hook to the NETDEV_PRECHANGEUPPER event handler, because we are calling into switchdev (and the __switchdev_handle_port_obj_del fanout helpers expect the upper/lower adjacency lists to still be valid) and PRECHANGEUPPER is the last moment in time when they still are. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-27 11:54:29 +00:00
net: dsa: deny enslaving 802.1Q upper to VLAN-aware bridge from PRECHANGEUPPER There doesn't seem to be any strong technical reason for doing it this way, but we'll be adding more checks for invalid upper device configurations, and it will be easier to have them all grouped under PRECHANGEUPPER. Tested that it still works: ip link set br0 type bridge vlan_filtering 1 ip link add link swp2 name swp2.100 type vlan id 100 ip link set swp2.100 master br0 [ 20.321312] br0: port 5(swp2.100) entered blocking state [ 20.326711] br0: port 5(swp2.100) entered disabled state Error: dsa_core: Cannot enslave VLAN device into VLAN aware bridge. [ 20.346549] br0: port 5(swp2.100) entered blocking state [ 20.351957] br0: port 5(swp2.100) entered disabled state Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21 00:10:23 +00:00
break;
net: dsa: convert check for 802.1Q upper when bridged into PRECHANGEUPPER DSA tries to prevent having a VLAN added by a bridge and by an 802.1Q upper at the same time. It does that by checking the VID in .ndo_vlan_rx_add_vid(), since that's something that the 8021q module calls, via vlan_vid_add(). When a VLAN matches in both subsystems, this check returns -EBUSY. However the vlan_vid_add() function isn't specific to the 8021q module in any way at all. It is simply the kernel's way to tell an interface to add a VLAN to its RX filter and not drop that VLAN. So there's no reason to return -EBUSY when somebody tries to call vlan_vid_add() for a VLAN that was installed by the bridge. The proper behavior is to accept that configuration. So what's wrong is how DSA checks that it has an 8021q upper. It should look at the actual uppers for that, not just assume that the 8021q module was somewhere in the call stack of .ndo_vlan_rx_add_vid(). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21 00:10:25 +00:00
}
net: dsa: walk through all changeupper notifier functions Traditionally, DSA has had a single netdev notifier handling function for each device type. For the sake of code cleanliness, we would like to introduce more handling functions which do one thing, but the conditions for entering these functions start to overlap. Example: a handling function which tracks whether any bridges contain both DSA and non-DSA interfaces. Either this is placed before dsa_slave_changeupper(), case in which it will prevent that function from executing, or we place it after dsa_slave_changeupper(), case in which we will prevent it from executing. The other alternative is to ignore errors from the new handling function (not ideal). To support this usage, we need to change the pattern. In the new model, we enter all notifier handling sub-functions, and exit with NOTIFY_DONE if there is nothing to do. This allows the sub-functions to be relatively free-form and independent from each other. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-19 17:48:12 +00:00
case NETDEV_CHANGEUPPER: {
int err;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
err = dsa_user_changeupper(dev, ptr);
net: dsa: walk through all changeupper notifier functions Traditionally, DSA has had a single netdev notifier handling function for each device type. For the sake of code cleanliness, we would like to introduce more handling functions which do one thing, but the conditions for entering these functions start to overlap. Example: a handling function which tracks whether any bridges contain both DSA and non-DSA interfaces. Either this is placed before dsa_slave_changeupper(), case in which it will prevent that function from executing, or we place it after dsa_slave_changeupper(), case in which we will prevent it from executing. The other alternative is to ignore errors from the new handling function (not ideal). To support this usage, we need to change the pattern. In the new model, we enter all notifier handling sub-functions, and exit with NOTIFY_DONE if there is nothing to do. This allows the sub-functions to be relatively free-form and independent from each other. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-19 17:48:12 +00:00
if (notifier_to_errno(err))
return err;
net: dsa: Link aggregation support Monitor the following events and notify the driver when: - A DSA port joins/leaves a LAG. - A LAG, made up of DSA ports, joins/leaves a bridge. - A DSA port in a LAG is enabled/disabled (enabled meaning "distributing" in 802.3ad LACP terms). When a LAG joins a bridge, the DSA subsystem will treat that as each individual port joining the bridge. The driver may look at the port's LAG device pointer to see if it is associated with any LAG, if that is required. This is analogue to how switchdev events are replicated out to all lower devices when reaching e.g. a LAG. Drivers can optionally request that DSA maintain a linear mapping from a LAG ID to the corresponding netdev by setting ds->num_lag_ids to the desired size. In the event that the hardware is not capable of offloading a particular LAG for any reason (the typical case being use of exotic modes like broadcast), DSA will take a hands-off approach, allowing the LAG to be formed as a pure software construct. This is reported back through the extended ACK, but is otherwise transparent to the user. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-13 08:42:53 +00:00
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
err = dsa_user_lag_changeupper(dev, ptr);
net: dsa: walk through all changeupper notifier functions Traditionally, DSA has had a single netdev notifier handling function for each device type. For the sake of code cleanliness, we would like to introduce more handling functions which do one thing, but the conditions for entering these functions start to overlap. Example: a handling function which tracks whether any bridges contain both DSA and non-DSA interfaces. Either this is placed before dsa_slave_changeupper(), case in which it will prevent that function from executing, or we place it after dsa_slave_changeupper(), case in which we will prevent it from executing. The other alternative is to ignore errors from the new handling function (not ideal). To support this usage, we need to change the pattern. In the new model, we enter all notifier handling sub-functions, and exit with NOTIFY_DONE if there is nothing to do. This allows the sub-functions to be relatively free-form and independent from each other. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-19 17:48:12 +00:00
if (notifier_to_errno(err))
return err;
net: dsa: Link aggregation support Monitor the following events and notify the driver when: - A DSA port joins/leaves a LAG. - A LAG, made up of DSA ports, joins/leaves a bridge. - A DSA port in a LAG is enabled/disabled (enabled meaning "distributing" in 802.3ad LACP terms). When a LAG joins a bridge, the DSA subsystem will treat that as each individual port joining the bridge. The driver may look at the port's LAG device pointer to see if it is associated with any LAG, if that is required. This is analogue to how switchdev events are replicated out to all lower devices when reaching e.g. a LAG. Drivers can optionally request that DSA maintain a linear mapping from a LAG ID to the corresponding netdev by setting ds->num_lag_ids to the desired size. In the event that the hardware is not capable of offloading a particular LAG for any reason (the typical case being use of exotic modes like broadcast), DSA will take a hands-off approach, allowing the LAG to be formed as a pure software construct. This is reported back through the extended ACK, but is otherwise transparent to the user. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-13 08:42:53 +00:00
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
err = dsa_conduit_changeupper(dev, ptr);
net: dsa: allow masters to join a LAG There are 2 ways in which a DSA user port may become handled by 2 CPU ports in a LAG: (1) its current DSA master joins a LAG ip link del bond0 && ip link add bond0 type bond mode 802.3ad ip link set eno2 master bond0 When this happens, all user ports with "eno2" as DSA master get automatically migrated to "bond0" as DSA master. (2) it is explicitly configured as such by the user # Before, the DSA master was eno3 ip link set swp0 type dsa master bond0 The design of this configuration is that the LAG device dynamically becomes a DSA master through dsa_master_setup() when the first physical DSA master becomes a LAG slave, and stops being so through dsa_master_teardown() when the last physical DSA master leaves. A LAG interface is considered as a valid DSA master only if it contains existing DSA masters, and no other lower interfaces. Therefore, we mainly rely on method (1) to enter this configuration. Each physical DSA master (LAG slave) retains its dev->dsa_ptr for when it becomes a standalone DSA master again. But the LAG master also has a dev->dsa_ptr, and this is actually duplicated from one of the physical LAG slaves, and therefore needs to be balanced when LAG slaves come and go. To the switch driver, putting DSA masters in a LAG is seen as putting their associated CPU ports in a LAG. We need to prepare cross-chip host FDB notifiers for CPU ports in a LAG, by calling the driver's ->lag_fdb_add method rather than ->port_fdb_add. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:07:04 +00:00
if (notifier_to_errno(err))
return err;
net: dsa: Link aggregation support Monitor the following events and notify the driver when: - A DSA port joins/leaves a LAG. - A LAG, made up of DSA ports, joins/leaves a bridge. - A DSA port in a LAG is enabled/disabled (enabled meaning "distributing" in 802.3ad LACP terms). When a LAG joins a bridge, the DSA subsystem will treat that as each individual port joining the bridge. The driver may look at the port's LAG device pointer to see if it is associated with any LAG, if that is required. This is analogue to how switchdev events are replicated out to all lower devices when reaching e.g. a LAG. Drivers can optionally request that DSA maintain a linear mapping from a LAG ID to the corresponding netdev by setting ds->num_lag_ids to the desired size. In the event that the hardware is not capable of offloading a particular LAG for any reason (the typical case being use of exotic modes like broadcast), DSA will take a hands-off approach, allowing the LAG to be formed as a pure software construct. This is reported back through the extended ACK, but is otherwise transparent to the user. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-13 08:42:53 +00:00
break;
net: dsa: walk through all changeupper notifier functions Traditionally, DSA has had a single netdev notifier handling function for each device type. For the sake of code cleanliness, we would like to introduce more handling functions which do one thing, but the conditions for entering these functions start to overlap. Example: a handling function which tracks whether any bridges contain both DSA and non-DSA interfaces. Either this is placed before dsa_slave_changeupper(), case in which it will prevent that function from executing, or we place it after dsa_slave_changeupper(), case in which we will prevent it from executing. The other alternative is to ignore errors from the new handling function (not ideal). To support this usage, we need to change the pattern. In the new model, we enter all notifier handling sub-functions, and exit with NOTIFY_DONE if there is nothing to do. This allows the sub-functions to be relatively free-form and independent from each other. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-19 17:48:12 +00:00
}
net: dsa: Link aggregation support Monitor the following events and notify the driver when: - A DSA port joins/leaves a LAG. - A LAG, made up of DSA ports, joins/leaves a bridge. - A DSA port in a LAG is enabled/disabled (enabled meaning "distributing" in 802.3ad LACP terms). When a LAG joins a bridge, the DSA subsystem will treat that as each individual port joining the bridge. The driver may look at the port's LAG device pointer to see if it is associated with any LAG, if that is required. This is analogue to how switchdev events are replicated out to all lower devices when reaching e.g. a LAG. Drivers can optionally request that DSA maintain a linear mapping from a LAG ID to the corresponding netdev by setting ds->num_lag_ids to the desired size. In the event that the hardware is not capable of offloading a particular LAG for any reason (the typical case being use of exotic modes like broadcast), DSA will take a hands-off approach, allowing the LAG to be formed as a pure software construct. This is reported back through the extended ACK, but is otherwise transparent to the user. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-13 08:42:53 +00:00
case NETDEV_CHANGELOWERSTATE: {
struct netdev_notifier_changelowerstate_info *info = ptr;
struct dsa_port *dp;
net: dsa: uninitialized variable in dsa_slave_netdevice_event() Return zero if both dsa_slave_dev_check() and netdev_uses_dsa() are false. Fixes: acc43b7bf52a ("net: dsa: allow masters to join a LAG") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-14 15:08:39 +00:00
int err = 0;
net: dsa: Link aggregation support Monitor the following events and notify the driver when: - A DSA port joins/leaves a LAG. - A LAG, made up of DSA ports, joins/leaves a bridge. - A DSA port in a LAG is enabled/disabled (enabled meaning "distributing" in 802.3ad LACP terms). When a LAG joins a bridge, the DSA subsystem will treat that as each individual port joining the bridge. The driver may look at the port's LAG device pointer to see if it is associated with any LAG, if that is required. This is analogue to how switchdev events are replicated out to all lower devices when reaching e.g. a LAG. Drivers can optionally request that DSA maintain a linear mapping from a LAG ID to the corresponding netdev by setting ds->num_lag_ids to the desired size. In the event that the hardware is not capable of offloading a particular LAG for any reason (the typical case being use of exotic modes like broadcast), DSA will take a hands-off approach, allowing the LAG to be formed as a pure software construct. This is reported back through the extended ACK, but is otherwise transparent to the user. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-13 08:42:53 +00:00
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
if (dsa_user_dev_check(dev)) {
dp = dsa_user_to_port(dev);
net: dsa: allow masters to join a LAG There are 2 ways in which a DSA user port may become handled by 2 CPU ports in a LAG: (1) its current DSA master joins a LAG ip link del bond0 && ip link add bond0 type bond mode 802.3ad ip link set eno2 master bond0 When this happens, all user ports with "eno2" as DSA master get automatically migrated to "bond0" as DSA master. (2) it is explicitly configured as such by the user # Before, the DSA master was eno3 ip link set swp0 type dsa master bond0 The design of this configuration is that the LAG device dynamically becomes a DSA master through dsa_master_setup() when the first physical DSA master becomes a LAG slave, and stops being so through dsa_master_teardown() when the last physical DSA master leaves. A LAG interface is considered as a valid DSA master only if it contains existing DSA masters, and no other lower interfaces. Therefore, we mainly rely on method (1) to enter this configuration. Each physical DSA master (LAG slave) retains its dev->dsa_ptr for when it becomes a standalone DSA master again. But the LAG master also has a dev->dsa_ptr, and this is actually duplicated from one of the physical LAG slaves, and therefore needs to be balanced when LAG slaves come and go. To the switch driver, putting DSA masters in a LAG is seen as putting their associated CPU ports in a LAG. We need to prepare cross-chip host FDB notifiers for CPU ports in a LAG, by calling the driver's ->lag_fdb_add method rather than ->port_fdb_add. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:07:04 +00:00
err = dsa_port_lag_change(dp, info->lower_state_info);
}
net: dsa: simplify netdevice events handling Simplify the code handling the slave netdevice notifier call by providing a dsa_slave_changeupper helper for NETDEV_CHANGEUPPER, and so on (only this event is supported at the moment.) Return NOTIFY_DONE when we did not care about an event, and NOTIFY_OK when we were concerned but no error occurred, as the API suggests. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03 18:20:17 +00:00
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
/* Mirror LAG port events on DSA conduits that are in
net: dsa: allow masters to join a LAG There are 2 ways in which a DSA user port may become handled by 2 CPU ports in a LAG: (1) its current DSA master joins a LAG ip link del bond0 && ip link add bond0 type bond mode 802.3ad ip link set eno2 master bond0 When this happens, all user ports with "eno2" as DSA master get automatically migrated to "bond0" as DSA master. (2) it is explicitly configured as such by the user # Before, the DSA master was eno3 ip link set swp0 type dsa master bond0 The design of this configuration is that the LAG device dynamically becomes a DSA master through dsa_master_setup() when the first physical DSA master becomes a LAG slave, and stops being so through dsa_master_teardown() when the last physical DSA master leaves. A LAG interface is considered as a valid DSA master only if it contains existing DSA masters, and no other lower interfaces. Therefore, we mainly rely on method (1) to enter this configuration. Each physical DSA master (LAG slave) retains its dev->dsa_ptr for when it becomes a standalone DSA master again. But the LAG master also has a dev->dsa_ptr, and this is actually duplicated from one of the physical LAG slaves, and therefore needs to be balanced when LAG slaves come and go. To the switch driver, putting DSA masters in a LAG is seen as putting their associated CPU ports in a LAG. We need to prepare cross-chip host FDB notifiers for CPU ports in a LAG, by calling the driver's ->lag_fdb_add method rather than ->port_fdb_add. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-11 01:07:04 +00:00
* a LAG towards their respective switch CPU ports
*/
if (netdev_uses_dsa(dev)) {
dp = dev->dsa_ptr;
err = dsa_port_lag_change(dp, info->lower_state_info);
}
net: dsa: Link aggregation support Monitor the following events and notify the driver when: - A DSA port joins/leaves a LAG. - A LAG, made up of DSA ports, joins/leaves a bridge. - A DSA port in a LAG is enabled/disabled (enabled meaning "distributing" in 802.3ad LACP terms). When a LAG joins a bridge, the DSA subsystem will treat that as each individual port joining the bridge. The driver may look at the port's LAG device pointer to see if it is associated with any LAG, if that is required. This is analogue to how switchdev events are replicated out to all lower devices when reaching e.g. a LAG. Drivers can optionally request that DSA maintain a linear mapping from a LAG ID to the corresponding netdev by setting ds->num_lag_ids to the desired size. In the event that the hardware is not capable of offloading a particular LAG for any reason (the typical case being use of exotic modes like broadcast), DSA will take a hands-off approach, allowing the LAG to be formed as a pure software construct. This is reported back through the extended ACK, but is otherwise transparent to the user. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-13 08:42:53 +00:00
return notifier_from_errno(err);
}
net: dsa: provide switch operations for tracking the master state Certain drivers may need to send management traffic to the switch for things like register access, FDB dump, etc, to accelerate what their slow bus (SPI, I2C, MDIO) can already do. Ethernet is faster (especially in bulk transactions) but is also more unreliable, since the user may decide to bring the DSA master down (or not bring it up), therefore severing the link between the host and the attached switch. Drivers needing Ethernet-based register access already should have fallback logic to the slow bus if the Ethernet method fails, but that fallback may be based on a timeout, and the I/O to the switch may slow down to a halt if the master is down, because every Ethernet packet will have to time out. The driver also doesn't have the option to turn off Ethernet-based I/O momentarily, because it wouldn't know when to turn it back on. Which is where this change comes in. By tracking NETDEV_CHANGE, NETDEV_UP and NETDEV_GOING_DOWN events on the DSA master, we should know the exact interval of time during which this interface is reliably available for traffic. Provide this information to switches so they can use it as they wish. An helper is added dsa_port_master_is_operational() to check if a master port is operational. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-02 00:03:20 +00:00
case NETDEV_CHANGE:
case NETDEV_UP: {
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
/* Track state of conduit port.
* DSA driver may require the conduit port (and indirectly
net: dsa: provide switch operations for tracking the master state Certain drivers may need to send management traffic to the switch for things like register access, FDB dump, etc, to accelerate what their slow bus (SPI, I2C, MDIO) can already do. Ethernet is faster (especially in bulk transactions) but is also more unreliable, since the user may decide to bring the DSA master down (or not bring it up), therefore severing the link between the host and the attached switch. Drivers needing Ethernet-based register access already should have fallback logic to the slow bus if the Ethernet method fails, but that fallback may be based on a timeout, and the I/O to the switch may slow down to a halt if the master is down, because every Ethernet packet will have to time out. The driver also doesn't have the option to turn off Ethernet-based I/O momentarily, because it wouldn't know when to turn it back on. Which is where this change comes in. By tracking NETDEV_CHANGE, NETDEV_UP and NETDEV_GOING_DOWN events on the DSA master, we should know the exact interval of time during which this interface is reliably available for traffic. Provide this information to switches so they can use it as they wish. An helper is added dsa_port_master_is_operational() to check if a master port is operational. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-02 00:03:20 +00:00
* the tagger) to be available for some special operation.
*/
if (netdev_uses_dsa(dev)) {
struct dsa_port *cpu_dp = dev->dsa_ptr;
struct dsa_switch_tree *dst = cpu_dp->ds->dst;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
/* Track when the conduit port is UP */
dsa_tree_conduit_oper_state_change(dst, dev,
netif_oper_up(dev));
net: dsa: provide switch operations for tracking the master state Certain drivers may need to send management traffic to the switch for things like register access, FDB dump, etc, to accelerate what their slow bus (SPI, I2C, MDIO) can already do. Ethernet is faster (especially in bulk transactions) but is also more unreliable, since the user may decide to bring the DSA master down (or not bring it up), therefore severing the link between the host and the attached switch. Drivers needing Ethernet-based register access already should have fallback logic to the slow bus if the Ethernet method fails, but that fallback may be based on a timeout, and the I/O to the switch may slow down to a halt if the master is down, because every Ethernet packet will have to time out. The driver also doesn't have the option to turn off Ethernet-based I/O momentarily, because it wouldn't know when to turn it back on. Which is where this change comes in. By tracking NETDEV_CHANGE, NETDEV_UP and NETDEV_GOING_DOWN events on the DSA master, we should know the exact interval of time during which this interface is reliably available for traffic. Provide this information to switches so they can use it as they wish. An helper is added dsa_port_master_is_operational() to check if a master port is operational. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-02 00:03:20 +00:00
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
/* Track when the conduit port is ready and can accept
net: dsa: provide switch operations for tracking the master state Certain drivers may need to send management traffic to the switch for things like register access, FDB dump, etc, to accelerate what their slow bus (SPI, I2C, MDIO) can already do. Ethernet is faster (especially in bulk transactions) but is also more unreliable, since the user may decide to bring the DSA master down (or not bring it up), therefore severing the link between the host and the attached switch. Drivers needing Ethernet-based register access already should have fallback logic to the slow bus if the Ethernet method fails, but that fallback may be based on a timeout, and the I/O to the switch may slow down to a halt if the master is down, because every Ethernet packet will have to time out. The driver also doesn't have the option to turn off Ethernet-based I/O momentarily, because it wouldn't know when to turn it back on. Which is where this change comes in. By tracking NETDEV_CHANGE, NETDEV_UP and NETDEV_GOING_DOWN events on the DSA master, we should know the exact interval of time during which this interface is reliably available for traffic. Provide this information to switches so they can use it as they wish. An helper is added dsa_port_master_is_operational() to check if a master port is operational. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-02 00:03:20 +00:00
* packet.
* NETDEV_UP event is not enough to flag a port as ready.
* We also have to wait for linkwatch_do_dev to dev_activate
* and emit a NETDEV_CHANGE event.
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
* We check if a conduit port is ready by checking if the dev
net: dsa: provide switch operations for tracking the master state Certain drivers may need to send management traffic to the switch for things like register access, FDB dump, etc, to accelerate what their slow bus (SPI, I2C, MDIO) can already do. Ethernet is faster (especially in bulk transactions) but is also more unreliable, since the user may decide to bring the DSA master down (or not bring it up), therefore severing the link between the host and the attached switch. Drivers needing Ethernet-based register access already should have fallback logic to the slow bus if the Ethernet method fails, but that fallback may be based on a timeout, and the I/O to the switch may slow down to a halt if the master is down, because every Ethernet packet will have to time out. The driver also doesn't have the option to turn off Ethernet-based I/O momentarily, because it wouldn't know when to turn it back on. Which is where this change comes in. By tracking NETDEV_CHANGE, NETDEV_UP and NETDEV_GOING_DOWN events on the DSA master, we should know the exact interval of time during which this interface is reliably available for traffic. Provide this information to switches so they can use it as they wish. An helper is added dsa_port_master_is_operational() to check if a master port is operational. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-02 00:03:20 +00:00
* have a qdisc assigned and is not noop.
*/
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dsa_tree_conduit_admin_state_change(dst, dev,
!qdisc_tx_is_noop(dev));
net: dsa: provide switch operations for tracking the master state Certain drivers may need to send management traffic to the switch for things like register access, FDB dump, etc, to accelerate what their slow bus (SPI, I2C, MDIO) can already do. Ethernet is faster (especially in bulk transactions) but is also more unreliable, since the user may decide to bring the DSA master down (or not bring it up), therefore severing the link between the host and the attached switch. Drivers needing Ethernet-based register access already should have fallback logic to the slow bus if the Ethernet method fails, but that fallback may be based on a timeout, and the I/O to the switch may slow down to a halt if the master is down, because every Ethernet packet will have to time out. The driver also doesn't have the option to turn off Ethernet-based I/O momentarily, because it wouldn't know when to turn it back on. Which is where this change comes in. By tracking NETDEV_CHANGE, NETDEV_UP and NETDEV_GOING_DOWN events on the DSA master, we should know the exact interval of time during which this interface is reliably available for traffic. Provide this information to switches so they can use it as they wish. An helper is added dsa_port_master_is_operational() to check if a master port is operational. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-02 00:03:20 +00:00
return NOTIFY_OK;
}
return NOTIFY_DONE;
}
net: dsa: automatically bring user ports down when master goes down This is not fixing any actual bug that I know of, but having a DSA interface that is up even when its lower (master) interface is down is one of those things that just do not sound right. Yes, DSA checks if the master is up before actually bringing the user interface up, but nobody prevents bringing the master interface down immediately afterwards... Then the user ports would attempt dev_queue_xmit on an interface that is down, and wonder what's wrong. This patch prevents that from happening. NETDEV_GOING_DOWN is the notification emitted _before_ the master actually goes down, and we are protected by the rtnl_mutex, so all is well. For those of you reading this because you were doing switch testing such as latency measurements for autonomously forwarded traffic, and you needed a controlled environment with no extra packets sent by the network stack, this patch breaks that, because now the user ports go down too, which may shut down the PHY etc. But please don't do it like that, just do instead: tc qdisc add dev eno2 clsact tc filter add dev eno2 egress flower action drop Tested with two cascaded DSA switches: $ ip link set eno2 down sja1105 spi2.0 sw0p2: Link is Down mscc_felix 0000:00:00.5 swp0: Link is Down fsl_enetc 0000:00:00.2 eno2: Link is Down Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-05 13:37:11 +00:00
case NETDEV_GOING_DOWN: {
struct dsa_port *dp, *cpu_dp;
struct dsa_switch_tree *dst;
LIST_HEAD(close_list);
if (!netdev_uses_dsa(dev))
return NOTIFY_DONE;
cpu_dp = dev->dsa_ptr;
dst = cpu_dp->ds->dst;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dsa_tree_conduit_admin_state_change(dst, dev, false);
net: dsa: provide switch operations for tracking the master state Certain drivers may need to send management traffic to the switch for things like register access, FDB dump, etc, to accelerate what their slow bus (SPI, I2C, MDIO) can already do. Ethernet is faster (especially in bulk transactions) but is also more unreliable, since the user may decide to bring the DSA master down (or not bring it up), therefore severing the link between the host and the attached switch. Drivers needing Ethernet-based register access already should have fallback logic to the slow bus if the Ethernet method fails, but that fallback may be based on a timeout, and the I/O to the switch may slow down to a halt if the master is down, because every Ethernet packet will have to time out. The driver also doesn't have the option to turn off Ethernet-based I/O momentarily, because it wouldn't know when to turn it back on. Which is where this change comes in. By tracking NETDEV_CHANGE, NETDEV_UP and NETDEV_GOING_DOWN events on the DSA master, we should know the exact interval of time during which this interface is reliably available for traffic. Provide this information to switches so they can use it as they wish. An helper is added dsa_port_master_is_operational() to check if a master port is operational. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-02 00:03:20 +00:00
net: dsa: automatically bring user ports down when master goes down This is not fixing any actual bug that I know of, but having a DSA interface that is up even when its lower (master) interface is down is one of those things that just do not sound right. Yes, DSA checks if the master is up before actually bringing the user interface up, but nobody prevents bringing the master interface down immediately afterwards... Then the user ports would attempt dev_queue_xmit on an interface that is down, and wonder what's wrong. This patch prevents that from happening. NETDEV_GOING_DOWN is the notification emitted _before_ the master actually goes down, and we are protected by the rtnl_mutex, so all is well. For those of you reading this because you were doing switch testing such as latency measurements for autonomously forwarded traffic, and you needed a controlled environment with no extra packets sent by the network stack, this patch breaks that, because now the user ports go down too, which may shut down the PHY etc. But please don't do it like that, just do instead: tc qdisc add dev eno2 clsact tc filter add dev eno2 egress flower action drop Tested with two cascaded DSA switches: $ ip link set eno2 down sja1105 spi2.0 sw0p2: Link is Down mscc_felix 0000:00:00.5 swp0: Link is Down fsl_enetc 0000:00:00.2 eno2: Link is Down Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-05 13:37:11 +00:00
list_for_each_entry(dp, &dst->ports, list) {
net: dsa: remove the "dsa_to_port in a loop" antipattern from the core Ever since Vivien's conversion of the ds->ports array into a dst->ports list, and the introduction of dsa_to_port, iterations through the ports of a switch became quadratic whenever dsa_to_port was needed. dsa_to_port can either be called directly, or indirectly through the dsa_is_{user,cpu,dsa,unused}_port helpers. Use the newly introduced dsa_switch_for_each_port() iteration macro that works with the iterator variable being a struct dsa_port *dp directly, and not an int i. It is an expensive variable to go from i to dp, but cheap to go from dp to i. This macro iterates through the entire ds->dst->ports list and filters by the ports belonging just to the switch provided as argument. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20 17:49:50 +00:00
if (!dsa_port_is_user(dp))
net: dsa: automatically bring user ports down when master goes down This is not fixing any actual bug that I know of, but having a DSA interface that is up even when its lower (master) interface is down is one of those things that just do not sound right. Yes, DSA checks if the master is up before actually bringing the user interface up, but nobody prevents bringing the master interface down immediately afterwards... Then the user ports would attempt dev_queue_xmit on an interface that is down, and wonder what's wrong. This patch prevents that from happening. NETDEV_GOING_DOWN is the notification emitted _before_ the master actually goes down, and we are protected by the rtnl_mutex, so all is well. For those of you reading this because you were doing switch testing such as latency measurements for autonomously forwarded traffic, and you needed a controlled environment with no extra packets sent by the network stack, this patch breaks that, because now the user ports go down too, which may shut down the PHY etc. But please don't do it like that, just do instead: tc qdisc add dev eno2 clsact tc filter add dev eno2 egress flower action drop Tested with two cascaded DSA switches: $ ip link set eno2 down sja1105 spi2.0 sw0p2: Link is Down mscc_felix 0000:00:00.5 swp0: Link is Down fsl_enetc 0000:00:00.2 eno2: Link is Down Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-05 13:37:11 +00:00
continue;
net: dsa: only bring down user ports assigned to a given DSA master This is an adaptation of commit c0a8a9c27493 ("net: dsa: automatically bring user ports down when master goes down") for multiple DSA masters. When a DSA master goes down, only the user ports under its control should go down too, the others can still send/receive traffic. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-19 17:48:16 +00:00
if (dp->cpu_dp != cpu_dp)
continue;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
list_add(&dp->user->close_list, &close_list);
net: dsa: automatically bring user ports down when master goes down This is not fixing any actual bug that I know of, but having a DSA interface that is up even when its lower (master) interface is down is one of those things that just do not sound right. Yes, DSA checks if the master is up before actually bringing the user interface up, but nobody prevents bringing the master interface down immediately afterwards... Then the user ports would attempt dev_queue_xmit on an interface that is down, and wonder what's wrong. This patch prevents that from happening. NETDEV_GOING_DOWN is the notification emitted _before_ the master actually goes down, and we are protected by the rtnl_mutex, so all is well. For those of you reading this because you were doing switch testing such as latency measurements for autonomously forwarded traffic, and you needed a controlled environment with no extra packets sent by the network stack, this patch breaks that, because now the user ports go down too, which may shut down the PHY etc. But please don't do it like that, just do instead: tc qdisc add dev eno2 clsact tc filter add dev eno2 egress flower action drop Tested with two cascaded DSA switches: $ ip link set eno2 down sja1105 spi2.0 sw0p2: Link is Down mscc_felix 0000:00:00.5 swp0: Link is Down fsl_enetc 0000:00:00.2 eno2: Link is Down Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-05 13:37:11 +00:00
}
dev_close_many(&close_list, true);
return NOTIFY_OK;
}
default:
break;
net: dsa: Deny enslaving VLAN devices into VLAN aware bridge VLAN devices on top of a DSA network device which is already part of a bridge and with said bridge being VLAN aware should not be allowed to be enslaved into that bridge. For one, this duplicates functionality offered by the VLAN aware bridge which supports tagged and untagged VLAN frames processing and it would make things needlessly complex to e.g.: propagate FDB/MDB accordingly. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-20 22:35:38 +00:00
}
net: dsa: integrate with SWITCHDEV for HW bridging In order to support bridging offloads in DSA switch drivers, select NET_SWITCHDEV to get access to the port_stp_update and parent_get_id NDOs that we are required to implement. To facilitate the integratation at the DSA driver level, we implement 3 types of operations: - port_join_bridge - port_leave_bridge - port_stp_update DSA will resolve which switch ports that are currently bridge port members as some Switch hardware/drivers need to know about that to limit the register programming to just the relevant registers (especially for slow MDIO buses). We also take care of setting the correct STP state when slave network devices are brought up/down while being bridge members. Finally, when a port is leaving the bridge, we make sure we set in BR_STATE_FORWARDING state, otherwise the bridge layer would leave it disabled as a result of having left the bridge. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-24 21:15:33 +00:00
return NOTIFY_DONE;
}
net: dsa: move netdevice notifier registration Move the netdevice notifier block register code in slave.c and provide helpers for dsa.c to register and unregister it. At the same time, check for errors since (un)register_netdevice_notifier may fail. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03 18:20:16 +00:00
net: dsa: don't use switchdev_notifier_fdb_info in dsa_switchdev_event_work Currently DSA doesn't add FDB entries on the CPU port, because it only does so through switchdev, which is associated with a net_device, and there are none of those for the CPU port. But actually FDB addresses on the CPU port have some use cases of their own, if the switchdev operations are initiated from within the DSA layer. There is just one problem with the existing code: it passes a structure in dsa_switchdev_event_work which was retrieved directly from switchdev, so it contains a net_device. We need to generalize the contents to something that covers the CPU port as well: the "ds, port" tuple is fine for that. Note that the new procedure for notifying the successful FDB offload is inspired from the rocker model. Also, nothing was being done if added_by_user was false. Let's check for that a lot earlier, and don't actually bother to schedule the worker for nothing. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-06 09:51:32 +00:00
static void
dsa_fdb_offload_notify(struct dsa_switchdev_event_work *switchdev_work)
{
net: switchdev: zero-initialize struct switchdev_notifier_fdb_info emitted by drivers towards the bridge The blamed commit added a new field to struct switchdev_notifier_fdb_info, but did not make sure that all call paths set it to something valid. For example, a switchdev driver may emit a SWITCHDEV_FDB_ADD_TO_BRIDGE notifier, and since the 'is_local' flag is not set, it contains junk from the stack, so the bridge might interpret those notifications as being for local FDB entries when that was not intended. To avoid that now and in the future, zero-initialize all switchdev_notifier_fdb_info structures created by drivers such that all newly added fields to not need to touch drivers again. Fixes: 2c4eca3ef716 ("net: bridge: switchdev: include local flag in FDB notifications") Reported-by: Ido Schimmel <idosch@idosch.org> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Karsten Graul <kgraul@linux.ibm.com> Link: https://lore.kernel.org/r/20210810115024.1629983-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-10 11:50:24 +00:00
struct switchdev_notifier_fdb_info info = {};
net: dsa: don't use switchdev_notifier_fdb_info in dsa_switchdev_event_work Currently DSA doesn't add FDB entries on the CPU port, because it only does so through switchdev, which is associated with a net_device, and there are none of those for the CPU port. But actually FDB addresses on the CPU port have some use cases of their own, if the switchdev operations are initiated from within the DSA layer. There is just one problem with the existing code: it passes a structure in dsa_switchdev_event_work which was retrieved directly from switchdev, so it contains a net_device. We need to generalize the contents to something that covers the CPU port as well: the "ds, port" tuple is fine for that. Note that the new procedure for notifying the successful FDB offload is inspired from the rocker model. Also, nothing was being done if added_by_user was false. Let's check for that a lot earlier, and don't actually bother to schedule the worker for nothing. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-06 09:51:32 +00:00
info.addr = switchdev_work->addr;
info.vid = switchdev_work->vid;
info.offloaded = true;
call_switchdev_notifiers(SWITCHDEV_FDB_OFFLOADED,
net: dsa: call SWITCHDEV_FDB_OFFLOADED for the orig_dev When switchdev_handle_fdb_event_to_device() replicates a FDB event emitted for the bridge or for a LAG port and DSA offloads that, we should notify back to switchdev that the FDB entry on the original device is what was offloaded, not on the DSA slave devices that the event is replicated on. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-23 14:00:52 +00:00
switchdev_work->orig_dev, &info.info, NULL);
net: dsa: don't use switchdev_notifier_fdb_info in dsa_switchdev_event_work Currently DSA doesn't add FDB entries on the CPU port, because it only does so through switchdev, which is associated with a net_device, and there are none of those for the CPU port. But actually FDB addresses on the CPU port have some use cases of their own, if the switchdev operations are initiated from within the DSA layer. There is just one problem with the existing code: it passes a structure in dsa_switchdev_event_work which was retrieved directly from switchdev, so it contains a net_device. We need to generalize the contents to something that covers the CPU port as well: the "ds, port" tuple is fine for that. Note that the new procedure for notifying the successful FDB offload is inspired from the rocker model. Also, nothing was being done if added_by_user was false. Let's check for that a lot earlier, and don't actually bother to schedule the worker for nothing. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-06 09:51:32 +00:00
}
net: dsa: Add support for learning FDB through notification Add support for learning FDB through notification. The driver defers the hardware update via ordered work queue. In case of a successful FDB add a notification is sent back to bridge. In case of hw FDB del failure the static FDB will be deleted from the bridge, thus, the interface is moved to down state in order to indicate inconsistent situation. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06 13:15:42 +00:00
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static void dsa_user_switchdev_event_work(struct work_struct *work)
net: dsa: Add support for learning FDB through notification Add support for learning FDB through notification. The driver defers the hardware update via ordered work queue. In case of a successful FDB add a notification is sent back to bridge. In case of hw FDB del failure the static FDB will be deleted from the bridge, thus, the interface is moved to down state in order to indicate inconsistent situation. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06 13:15:42 +00:00
{
struct dsa_switchdev_event_work *switchdev_work =
container_of(work, struct dsa_switchdev_event_work, work);
net: dsa: rename the host FDB and MDB methods to contain the "bridge" namespace We are preparing to add API in port.c that adds FDB and MDB entries that correspond to the port's standalone database. Rename the existing methods to make it clear that the FDB and MDB entries offloaded come from the bridge database. Since the function names lengthen in dsa_slave_switchdev_event_work(), we place "addr" and "vid" in temporary variables, to shorten those. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 19:14:09 +00:00
const unsigned char *addr = switchdev_work->addr;
net: dsa: remove "ds" and "port" from struct dsa_switchdev_event_work By construction, the struct net_device *dev passed to dsa_slave_switchdev_event_work() via struct dsa_switchdev_event_work is always a DSA slave device. Therefore, it is redundant to pass struct dsa_switch and int port information in the deferred work structure. This can be retrieved at all times from the provided struct net_device via dsa_slave_to_port(). For the same reason, we can drop the dsa_is_user_port() check in dsa_fdb_offload_notify(). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-23 14:00:51 +00:00
struct net_device *dev = switchdev_work->dev;
net: dsa: rename the host FDB and MDB methods to contain the "bridge" namespace We are preparing to add API in port.c that adds FDB and MDB entries that correspond to the port's standalone database. Rename the existing methods to make it clear that the FDB and MDB entries offloaded come from the bridge database. Since the function names lengthen in dsa_slave_switchdev_event_work(), we place "addr" and "vid" in temporary variables, to shorten those. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 19:14:09 +00:00
u16 vid = switchdev_work->vid;
net: dsa: remove "ds" and "port" from struct dsa_switchdev_event_work By construction, the struct net_device *dev passed to dsa_slave_switchdev_event_work() via struct dsa_switchdev_event_work is always a DSA slave device. Therefore, it is redundant to pass struct dsa_switch and int port information in the deferred work structure. This can be retrieved at all times from the provided struct net_device via dsa_slave_to_port(). For the same reason, we can drop the dsa_is_user_port() check in dsa_fdb_offload_notify(). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-23 14:00:51 +00:00
struct dsa_switch *ds;
net: dsa: don't use switchdev_notifier_fdb_info in dsa_switchdev_event_work Currently DSA doesn't add FDB entries on the CPU port, because it only does so through switchdev, which is associated with a net_device, and there are none of those for the CPU port. But actually FDB addresses on the CPU port have some use cases of their own, if the switchdev operations are initiated from within the DSA layer. There is just one problem with the existing code: it passes a structure in dsa_switchdev_event_work which was retrieved directly from switchdev, so it contains a net_device. We need to generalize the contents to something that covers the CPU port as well: the "ds, port" tuple is fine for that. Note that the new procedure for notifying the successful FDB offload is inspired from the rocker model. Also, nothing was being done if added_by_user was false. Let's check for that a lot earlier, and don't actually bother to schedule the worker for nothing. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-06 09:51:32 +00:00
struct dsa_port *dp;
net: dsa: Add support for learning FDB through notification Add support for learning FDB through notification. The driver defers the hardware update via ordered work queue. In case of a successful FDB add a notification is sent back to bridge. In case of hw FDB del failure the static FDB will be deleted from the bridge, thus, the interface is moved to down state in order to indicate inconsistent situation. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06 13:15:42 +00:00
int err;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dp = dsa_user_to_port(dev);
net: dsa: remove "ds" and "port" from struct dsa_switchdev_event_work By construction, the struct net_device *dev passed to dsa_slave_switchdev_event_work() via struct dsa_switchdev_event_work is always a DSA slave device. Therefore, it is redundant to pass struct dsa_switch and int port information in the deferred work structure. This can be retrieved at all times from the provided struct net_device via dsa_slave_to_port(). For the same reason, we can drop the dsa_is_user_port() check in dsa_fdb_offload_notify(). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-23 14:00:51 +00:00
ds = dp->ds;
net: dsa: don't use switchdev_notifier_fdb_info in dsa_switchdev_event_work Currently DSA doesn't add FDB entries on the CPU port, because it only does so through switchdev, which is associated with a net_device, and there are none of those for the CPU port. But actually FDB addresses on the CPU port have some use cases of their own, if the switchdev operations are initiated from within the DSA layer. There is just one problem with the existing code: it passes a structure in dsa_switchdev_event_work which was retrieved directly from switchdev, so it contains a net_device. We need to generalize the contents to something that covers the CPU port as well: the "ds, port" tuple is fine for that. Note that the new procedure for notifying the successful FDB offload is inspired from the rocker model. Also, nothing was being done if added_by_user was false. Let's check for that a lot earlier, and don't actually bother to schedule the worker for nothing. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-06 09:51:32 +00:00
net: dsa: Add support for learning FDB through notification Add support for learning FDB through notification. The driver defers the hardware update via ordered work queue. In case of a successful FDB add a notification is sent back to bridge. In case of hw FDB del failure the static FDB will be deleted from the bridge, thus, the interface is moved to down state in order to indicate inconsistent situation. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06 13:15:42 +00:00
switch (switchdev_work->event) {
case SWITCHDEV_FDB_ADD_TO_DEVICE:
net: dsa: introduce a separate cross-chip notifier type for host FDBs DSA treats some bridge FDB entries by trapping them to the CPU port. Currently, the only class of such entries are FDB addresses learnt by the software bridge on a foreign interface. However there are many more to be added: - FDB entries with the is_local flag (for termination) added by the bridge on the user ports (typically containing the MAC address of the bridge port) - FDB entries pointing towards the bridge net device (for termination). Typically these contain the MAC address of the bridge net device. - Static FDB entries installed on a foreign interface that is in the same bridge with a DSA user port. The reason why a separate cross-chip notifier for host FDBs is justified compared to normal FDBs is the same as in the case of host MDBs: the cross-chip notifier matching function in switch.c should avoid installing these entries on routing ports that route towards the targeted switch, but not towards the CPU. This is required in order to have proper support for H-like multi-chip topologies. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-29 14:06:51 +00:00
if (switchdev_work->host_addr)
net: dsa: rename the host FDB and MDB methods to contain the "bridge" namespace We are preparing to add API in port.c that adds FDB and MDB entries that correspond to the port's standalone database. Rename the existing methods to make it clear that the FDB and MDB entries offloaded come from the bridge database. Since the function names lengthen in dsa_slave_switchdev_event_work(), we place "addr" and "vid" in temporary variables, to shorten those. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 19:14:09 +00:00
err = dsa_port_bridge_host_fdb_add(dp, addr, vid);
net: dsa: support FDB events on offloaded LAG interfaces This change introduces support for installing static FDB entries towards a bridge port that is a LAG of multiple DSA switch ports, as well as support for filtering towards the CPU local FDB entries emitted for LAG interfaces that are bridge ports. Conceptually, host addresses on LAG ports are identical to what we do for plain bridge ports. Whereas FDB entries _towards_ a LAG can't simply be replicated towards all member ports like we do for multicast, or VLAN. Instead we need new driver API. Hardware usually considers a LAG to be a "logical port", and sets the entire LAG as the forwarding destination. The physical egress port selection within the LAG is made by hashing policy, as usual. To represent the logical port corresponding to the LAG, we pass by value a copy of the dsa_lag structure to all switches in the tree that have at least one port in that LAG. To illustrate why a refcounted list of FDB entries is needed in struct dsa_lag, it is enough to say that: - a LAG may be a bridge port and may therefore receive FDB events even while it isn't yet offloaded by any DSA interface - DSA interfaces may be removed from a LAG while that is a bridge port; we don't want FDB entries lingering around, but we don't want to remove entries that are still in use, either For all the cases below to work, the idea is to always keep an FDB entry on a LAG with a reference count equal to the DSA member ports. So: - if a port joins a LAG, it requests the bridge to replay the FDB, and the FDB entries get created, or their refcount gets bumped by one - if a port leaves a LAG, the FDB replay deletes or decrements refcount by one - if an FDB is installed towards a LAG with ports already present, that entry is created (if it doesn't exist) and its refcount is bumped by the amount of ports already present in the LAG echo "Adding FDB entry to bond with existing ports" ip link del bond0 ip link add bond0 type bond mode 802.3ad ip link set swp1 down && ip link set swp1 master bond0 && ip link set swp1 up ip link set swp2 down && ip link set swp2 master bond0 && ip link set swp2 up ip link del br0 ip link add br0 type bridge ip link set bond0 master br0 bridge fdb add dev bond0 00:01:02:03:04:05 master static ip link del br0 ip link del bond0 echo "Adding FDB entry to empty bond" ip link del bond0 ip link add bond0 type bond mode 802.3ad ip link del br0 ip link add br0 type bridge ip link set bond0 master br0 bridge fdb add dev bond0 00:01:02:03:04:05 master static ip link set swp1 down && ip link set swp1 master bond0 && ip link set swp1 up ip link set swp2 down && ip link set swp2 master bond0 && ip link set swp2 up ip link del br0 ip link del bond0 echo "Adding FDB entry to empty bond, then removing ports one by one" ip link del bond0 ip link add bond0 type bond mode 802.3ad ip link del br0 ip link add br0 type bridge ip link set bond0 master br0 bridge fdb add dev bond0 00:01:02:03:04:05 master static ip link set swp1 down && ip link set swp1 master bond0 && ip link set swp1 up ip link set swp2 down && ip link set swp2 master bond0 && ip link set swp2 up ip link set swp1 nomaster ip link set swp2 nomaster ip link del br0 ip link del bond0 Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-23 14:00:53 +00:00
else if (dp->lag)
net: dsa: rename the host FDB and MDB methods to contain the "bridge" namespace We are preparing to add API in port.c that adds FDB and MDB entries that correspond to the port's standalone database. Rename the existing methods to make it clear that the FDB and MDB entries offloaded come from the bridge database. Since the function names lengthen in dsa_slave_switchdev_event_work(), we place "addr" and "vid" in temporary variables, to shorten those. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 19:14:09 +00:00
err = dsa_port_lag_fdb_add(dp, addr, vid);
net: dsa: introduce a separate cross-chip notifier type for host FDBs DSA treats some bridge FDB entries by trapping them to the CPU port. Currently, the only class of such entries are FDB addresses learnt by the software bridge on a foreign interface. However there are many more to be added: - FDB entries with the is_local flag (for termination) added by the bridge on the user ports (typically containing the MAC address of the bridge port) - FDB entries pointing towards the bridge net device (for termination). Typically these contain the MAC address of the bridge net device. - Static FDB entries installed on a foreign interface that is in the same bridge with a DSA user port. The reason why a separate cross-chip notifier for host FDBs is justified compared to normal FDBs is the same as in the case of host MDBs: the cross-chip notifier matching function in switch.c should avoid installing these entries on routing ports that route towards the targeted switch, but not towards the CPU. This is required in order to have proper support for H-like multi-chip topologies. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-29 14:06:51 +00:00
else
net: dsa: rename the host FDB and MDB methods to contain the "bridge" namespace We are preparing to add API in port.c that adds FDB and MDB entries that correspond to the port's standalone database. Rename the existing methods to make it clear that the FDB and MDB entries offloaded come from the bridge database. Since the function names lengthen in dsa_slave_switchdev_event_work(), we place "addr" and "vid" in temporary variables, to shorten those. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 19:14:09 +00:00
err = dsa_port_fdb_add(dp, addr, vid);
net: dsa: Add support for learning FDB through notification Add support for learning FDB through notification. The driver defers the hardware update via ordered work queue. In case of a successful FDB add a notification is sent back to bridge. In case of hw FDB del failure the static FDB will be deleted from the bridge, thus, the interface is moved to down state in order to indicate inconsistent situation. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06 13:15:42 +00:00
if (err) {
net: dsa: don't use switchdev_notifier_fdb_info in dsa_switchdev_event_work Currently DSA doesn't add FDB entries on the CPU port, because it only does so through switchdev, which is associated with a net_device, and there are none of those for the CPU port. But actually FDB addresses on the CPU port have some use cases of their own, if the switchdev operations are initiated from within the DSA layer. There is just one problem with the existing code: it passes a structure in dsa_switchdev_event_work which was retrieved directly from switchdev, so it contains a net_device. We need to generalize the contents to something that covers the CPU port as well: the "ds, port" tuple is fine for that. Note that the new procedure for notifying the successful FDB offload is inspired from the rocker model. Also, nothing was being done if added_by_user was false. Let's check for that a lot earlier, and don't actually bother to schedule the worker for nothing. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-06 09:51:32 +00:00
dev_err(ds->dev,
"port %d failed to add %pM vid %d to fdb: %d\n",
net: dsa: rename the host FDB and MDB methods to contain the "bridge" namespace We are preparing to add API in port.c that adds FDB and MDB entries that correspond to the port's standalone database. Rename the existing methods to make it clear that the FDB and MDB entries offloaded come from the bridge database. Since the function names lengthen in dsa_slave_switchdev_event_work(), we place "addr" and "vid" in temporary variables, to shorten those. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 19:14:09 +00:00
dp->index, addr, vid, err);
net: dsa: Add support for learning FDB through notification Add support for learning FDB through notification. The driver defers the hardware update via ordered work queue. In case of a successful FDB add a notification is sent back to bridge. In case of hw FDB del failure the static FDB will be deleted from the bridge, thus, the interface is moved to down state in order to indicate inconsistent situation. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06 13:15:42 +00:00
break;
}
net: dsa: don't use switchdev_notifier_fdb_info in dsa_switchdev_event_work Currently DSA doesn't add FDB entries on the CPU port, because it only does so through switchdev, which is associated with a net_device, and there are none of those for the CPU port. But actually FDB addresses on the CPU port have some use cases of their own, if the switchdev operations are initiated from within the DSA layer. There is just one problem with the existing code: it passes a structure in dsa_switchdev_event_work which was retrieved directly from switchdev, so it contains a net_device. We need to generalize the contents to something that covers the CPU port as well: the "ds, port" tuple is fine for that. Note that the new procedure for notifying the successful FDB offload is inspired from the rocker model. Also, nothing was being done if added_by_user was false. Let's check for that a lot earlier, and don't actually bother to schedule the worker for nothing. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-06 09:51:32 +00:00
dsa_fdb_offload_notify(switchdev_work);
net: dsa: Add support for learning FDB through notification Add support for learning FDB through notification. The driver defers the hardware update via ordered work queue. In case of a successful FDB add a notification is sent back to bridge. In case of hw FDB del failure the static FDB will be deleted from the bridge, thus, the interface is moved to down state in order to indicate inconsistent situation. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06 13:15:42 +00:00
break;
case SWITCHDEV_FDB_DEL_TO_DEVICE:
net: dsa: introduce a separate cross-chip notifier type for host FDBs DSA treats some bridge FDB entries by trapping them to the CPU port. Currently, the only class of such entries are FDB addresses learnt by the software bridge on a foreign interface. However there are many more to be added: - FDB entries with the is_local flag (for termination) added by the bridge on the user ports (typically containing the MAC address of the bridge port) - FDB entries pointing towards the bridge net device (for termination). Typically these contain the MAC address of the bridge net device. - Static FDB entries installed on a foreign interface that is in the same bridge with a DSA user port. The reason why a separate cross-chip notifier for host FDBs is justified compared to normal FDBs is the same as in the case of host MDBs: the cross-chip notifier matching function in switch.c should avoid installing these entries on routing ports that route towards the targeted switch, but not towards the CPU. This is required in order to have proper support for H-like multi-chip topologies. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-29 14:06:51 +00:00
if (switchdev_work->host_addr)
net: dsa: rename the host FDB and MDB methods to contain the "bridge" namespace We are preparing to add API in port.c that adds FDB and MDB entries that correspond to the port's standalone database. Rename the existing methods to make it clear that the FDB and MDB entries offloaded come from the bridge database. Since the function names lengthen in dsa_slave_switchdev_event_work(), we place "addr" and "vid" in temporary variables, to shorten those. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 19:14:09 +00:00
err = dsa_port_bridge_host_fdb_del(dp, addr, vid);
net: dsa: support FDB events on offloaded LAG interfaces This change introduces support for installing static FDB entries towards a bridge port that is a LAG of multiple DSA switch ports, as well as support for filtering towards the CPU local FDB entries emitted for LAG interfaces that are bridge ports. Conceptually, host addresses on LAG ports are identical to what we do for plain bridge ports. Whereas FDB entries _towards_ a LAG can't simply be replicated towards all member ports like we do for multicast, or VLAN. Instead we need new driver API. Hardware usually considers a LAG to be a "logical port", and sets the entire LAG as the forwarding destination. The physical egress port selection within the LAG is made by hashing policy, as usual. To represent the logical port corresponding to the LAG, we pass by value a copy of the dsa_lag structure to all switches in the tree that have at least one port in that LAG. To illustrate why a refcounted list of FDB entries is needed in struct dsa_lag, it is enough to say that: - a LAG may be a bridge port and may therefore receive FDB events even while it isn't yet offloaded by any DSA interface - DSA interfaces may be removed from a LAG while that is a bridge port; we don't want FDB entries lingering around, but we don't want to remove entries that are still in use, either For all the cases below to work, the idea is to always keep an FDB entry on a LAG with a reference count equal to the DSA member ports. So: - if a port joins a LAG, it requests the bridge to replay the FDB, and the FDB entries get created, or their refcount gets bumped by one - if a port leaves a LAG, the FDB replay deletes or decrements refcount by one - if an FDB is installed towards a LAG with ports already present, that entry is created (if it doesn't exist) and its refcount is bumped by the amount of ports already present in the LAG echo "Adding FDB entry to bond with existing ports" ip link del bond0 ip link add bond0 type bond mode 802.3ad ip link set swp1 down && ip link set swp1 master bond0 && ip link set swp1 up ip link set swp2 down && ip link set swp2 master bond0 && ip link set swp2 up ip link del br0 ip link add br0 type bridge ip link set bond0 master br0 bridge fdb add dev bond0 00:01:02:03:04:05 master static ip link del br0 ip link del bond0 echo "Adding FDB entry to empty bond" ip link del bond0 ip link add bond0 type bond mode 802.3ad ip link del br0 ip link add br0 type bridge ip link set bond0 master br0 bridge fdb add dev bond0 00:01:02:03:04:05 master static ip link set swp1 down && ip link set swp1 master bond0 && ip link set swp1 up ip link set swp2 down && ip link set swp2 master bond0 && ip link set swp2 up ip link del br0 ip link del bond0 echo "Adding FDB entry to empty bond, then removing ports one by one" ip link del bond0 ip link add bond0 type bond mode 802.3ad ip link del br0 ip link add br0 type bridge ip link set bond0 master br0 bridge fdb add dev bond0 00:01:02:03:04:05 master static ip link set swp1 down && ip link set swp1 master bond0 && ip link set swp1 up ip link set swp2 down && ip link set swp2 master bond0 && ip link set swp2 up ip link set swp1 nomaster ip link set swp2 nomaster ip link del br0 ip link del bond0 Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-23 14:00:53 +00:00
else if (dp->lag)
net: dsa: rename the host FDB and MDB methods to contain the "bridge" namespace We are preparing to add API in port.c that adds FDB and MDB entries that correspond to the port's standalone database. Rename the existing methods to make it clear that the FDB and MDB entries offloaded come from the bridge database. Since the function names lengthen in dsa_slave_switchdev_event_work(), we place "addr" and "vid" in temporary variables, to shorten those. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 19:14:09 +00:00
err = dsa_port_lag_fdb_del(dp, addr, vid);
net: dsa: introduce a separate cross-chip notifier type for host FDBs DSA treats some bridge FDB entries by trapping them to the CPU port. Currently, the only class of such entries are FDB addresses learnt by the software bridge on a foreign interface. However there are many more to be added: - FDB entries with the is_local flag (for termination) added by the bridge on the user ports (typically containing the MAC address of the bridge port) - FDB entries pointing towards the bridge net device (for termination). Typically these contain the MAC address of the bridge net device. - Static FDB entries installed on a foreign interface that is in the same bridge with a DSA user port. The reason why a separate cross-chip notifier for host FDBs is justified compared to normal FDBs is the same as in the case of host MDBs: the cross-chip notifier matching function in switch.c should avoid installing these entries on routing ports that route towards the targeted switch, but not towards the CPU. This is required in order to have proper support for H-like multi-chip topologies. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-29 14:06:51 +00:00
else
net: dsa: rename the host FDB and MDB methods to contain the "bridge" namespace We are preparing to add API in port.c that adds FDB and MDB entries that correspond to the port's standalone database. Rename the existing methods to make it clear that the FDB and MDB entries offloaded come from the bridge database. Since the function names lengthen in dsa_slave_switchdev_event_work(), we place "addr" and "vid" in temporary variables, to shorten those. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 19:14:09 +00:00
err = dsa_port_fdb_del(dp, addr, vid);
net: dsa: Add support for learning FDB through notification Add support for learning FDB through notification. The driver defers the hardware update via ordered work queue. In case of a successful FDB add a notification is sent back to bridge. In case of hw FDB del failure the static FDB will be deleted from the bridge, thus, the interface is moved to down state in order to indicate inconsistent situation. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06 13:15:42 +00:00
if (err) {
net: dsa: don't use switchdev_notifier_fdb_info in dsa_switchdev_event_work Currently DSA doesn't add FDB entries on the CPU port, because it only does so through switchdev, which is associated with a net_device, and there are none of those for the CPU port. But actually FDB addresses on the CPU port have some use cases of their own, if the switchdev operations are initiated from within the DSA layer. There is just one problem with the existing code: it passes a structure in dsa_switchdev_event_work which was retrieved directly from switchdev, so it contains a net_device. We need to generalize the contents to something that covers the CPU port as well: the "ds, port" tuple is fine for that. Note that the new procedure for notifying the successful FDB offload is inspired from the rocker model. Also, nothing was being done if added_by_user was false. Let's check for that a lot earlier, and don't actually bother to schedule the worker for nothing. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-06 09:51:32 +00:00
dev_err(ds->dev,
"port %d failed to delete %pM vid %d from fdb: %d\n",
net: dsa: rename the host FDB and MDB methods to contain the "bridge" namespace We are preparing to add API in port.c that adds FDB and MDB entries that correspond to the port's standalone database. Rename the existing methods to make it clear that the FDB and MDB entries offloaded come from the bridge database. Since the function names lengthen in dsa_slave_switchdev_event_work(), we place "addr" and "vid" in temporary variables, to shorten those. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 19:14:09 +00:00
dp->index, addr, vid, err);
net: dsa: Add support for learning FDB through notification Add support for learning FDB through notification. The driver defers the hardware update via ordered work queue. In case of a successful FDB add a notification is sent back to bridge. In case of hw FDB del failure the static FDB will be deleted from the bridge, thus, the interface is moved to down state in order to indicate inconsistent situation. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06 13:15:42 +00:00
}
net: dsa: be louder when a non-legacy FDB operation fails The dev_close() call was added in commit c9eb3e0f8701 ("net: dsa: Add support for learning FDB through notification") "to indicate inconsistent situation" when we could not delete an FDB entry from the port. bridge fdb del d8:58:d7:00:ca:6d dev swp0 self master It is a bit drastic and at the same time not helpful if the above fails to only print with netdev_dbg log level, but on the other hand to bring the interface down. So increase the verbosity of the error message, and drop dev_close(). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-06 09:51:31 +00:00
net: dsa: Add support for learning FDB through notification Add support for learning FDB through notification. The driver defers the hardware update via ordered work queue. In case of a successful FDB add a notification is sent back to bridge. In case of hw FDB del failure the static FDB will be deleted from the bridge, thus, the interface is moved to down state in order to indicate inconsistent situation. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06 13:15:42 +00:00
break;
}
kfree(switchdev_work);
}
net: dsa: use switchdev_handle_fdb_{add,del}_to_device Using the new fan-out helper for FDB entries installed on the software bridge, we can install host addresses with the proper refcount on the CPU port, such that this case: ip link set swp0 master br0 ip link set swp1 master br0 ip link set swp2 master br0 ip link set swp3 master br0 ip link set br0 address 00:01:02:03:04:05 ip link set swp3 nomaster works properly and the br0 address remains installed as a host entry with refcount 3 instead of getting deleted. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-19 13:51:40 +00:00
static bool dsa_foreign_dev_check(const struct net_device *dev,
const struct net_device *foreign_dev)
net: dsa: listen for SWITCHDEV_{FDB,DEL}_ADD_TO_DEVICE on foreign bridge neighbors Some DSA switches (and not only) cannot learn source MAC addresses from packets injected from the CPU. They only perform hardware address learning from inbound traffic. This can be problematic when we have a bridge spanning some DSA switch ports and some non-DSA ports (which we'll call "foreign interfaces" from DSA's perspective). There are 2 classes of problems created by the lack of learning on CPU-injected traffic: - excessive flooding, due to the fact that DSA treats those addresses as unknown - the risk of stale routes, which can lead to temporary packet loss To illustrate the second class, consider the following situation, which is common in production equipment (wireless access points, where there is a WLAN interface and an Ethernet switch, and these form a single bridging domain). AP 1: +------------------------------------------------------------------------+ | br0 | +------------------------------------------------------------------------+ +------------+ +------------+ +------------+ +------------+ +------------+ | swp0 | | swp1 | | swp2 | | swp3 | | wlan0 | +------------+ +------------+ +------------+ +------------+ +------------+ | ^ ^ | | | | | | | Client A Client B | | | +------------+ +------------+ +------------+ +------------+ +------------+ | swp0 | | swp1 | | swp2 | | swp3 | | wlan0 | +------------+ +------------+ +------------+ +------------+ +------------+ +------------------------------------------------------------------------+ | br0 | +------------------------------------------------------------------------+ AP 2 - br0 of AP 1 will know that Clients A and B are reachable via wlan0 - the hardware fdb of a DSA switch driver today is not kept in sync with the software entries on other bridge ports, so it will not know that clients A and B are reachable via the CPU port UNLESS the hardware switch itself performs SA learning from traffic injected from the CPU. Nonetheless, a substantial number of switches don't. - the hardware fdb of the DSA switch on AP 2 may autonomously learn that Client A and B are reachable through swp0. Therefore, the software br0 of AP 2 also may or may not learn this. In the example we're illustrating, some Ethernet traffic has been going on, and br0 from AP 2 has indeed learnt that it can reach Client B through swp0. One of the wireless clients, say Client B, disconnects from AP 1 and roams to AP 2. The topology now looks like this: AP 1: +------------------------------------------------------------------------+ | br0 | +------------------------------------------------------------------------+ +------------+ +------------+ +------------+ +------------+ +------------+ | swp0 | | swp1 | | swp2 | | swp3 | | wlan0 | +------------+ +------------+ +------------+ +------------+ +------------+ | ^ | | | Client A | | | Client B | | | v +------------+ +------------+ +------------+ +------------+ +------------+ | swp0 | | swp1 | | swp2 | | swp3 | | wlan0 | +------------+ +------------+ +------------+ +------------+ +------------+ +------------------------------------------------------------------------+ | br0 | +------------------------------------------------------------------------+ AP 2 - br0 of AP 1 still knows that Client A is reachable via wlan0 (no change) - br0 of AP 1 will (possibly) know that Client B has left wlan0. There are cases where it might never find out though. Either way, DSA today does not process that notification in any way. - the hardware FDB of the DSA switch on AP 1 may learn autonomously that Client B can be reached via swp0, if it receives any packet with Client 1's source MAC address over Ethernet. - the hardware FDB of the DSA switch on AP 2 still thinks that Client B can be reached via swp0. It does not know that it has roamed to wlan0, because it doesn't perform SA learning from the CPU port. Now Client A contacts Client B. AP 1 routes the packet fine towards swp0 and delivers it on the Ethernet segment. AP 2 sees a frame on swp0 and its fdb says that the destination is swp0. Hairpinning is disabled => drop. This problem comes from the fact that these switches have a 'blind spot' for addresses coming from software bridging. The generic solution is not to assume that hardware learning can be enabled somehow, but to listen to more bridge learning events. It turns out that the bridge driver does learn in software from all inbound frames, in __br_handle_local_finish. A proper SWITCHDEV_FDB_ADD_TO_DEVICE notification is emitted for the addresses serviced by the bridge on 'foreign' interfaces. The software bridge also does the right thing on migration, by notifying that the old entry is deleted, so that does not need to be special-cased in DSA. When it is deleted, we just need to delete our static FDB entry towards the CPU too, and wait. The problem is that DSA currently only cares about SWITCHDEV_FDB_ADD_TO_DEVICE events received on its own interfaces, such as static FDB entries. Luckily we can change that, and DSA can listen to all switchdev FDB add/del events in the system and figure out if those events were emitted by a bridge that spans at least one of DSA's own ports. In case that is true, DSA will also offload that address towards its own CPU port, in the eventuality that there might be bridge clients attached to the DSA switch who want to talk to the station connected to the foreign interface. In terms of implementation, we need to keep the fdb_info->added_by_user check for the case where the switchdev event was targeted directly at a DSA switch port. But we don't need to look at that flag for snooped events. So the check is currently too late, we need to move it earlier. This also simplifies the code a bit, since we avoid uselessly allocating and freeing switchdev_work. We could probably do some improvements in the future. For example, multi-bridge support is rudimentary at the moment. If there are two bridges spanning a DSA switch's ports, and both of them need to service the same MAC address, then what will happen is that the migration of one of those stations will trigger the deletion of the FDB entry from the CPU port while it is still used by other bridge. That could be improved with reference counting but is left for another time. This behavior needs to be enabled at driver level by setting ds->assisted_learning_on_cpu_port = true. This is because we don't want to inflict a potential performance penalty (accesses through MDIO/I2C/SPI are expensive) to hardware that really doesn't need it because address learning on the CPU port works there. Reported-by: DENG Qingfang <dqfext@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-06 09:51:35 +00:00
{
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
const struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: use switchdev_handle_fdb_{add,del}_to_device Using the new fan-out helper for FDB entries installed on the software bridge, we can install host addresses with the proper refcount on the CPU port, such that this case: ip link set swp0 master br0 ip link set swp1 master br0 ip link set swp2 master br0 ip link set swp3 master br0 ip link set br0 address 00:01:02:03:04:05 ip link set swp3 nomaster works properly and the br0 address remains installed as a host entry with refcount 3 instead of getting deleted. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-19 13:51:40 +00:00
struct dsa_switch_tree *dst = dp->ds->dst;
net: dsa: listen for SWITCHDEV_{FDB,DEL}_ADD_TO_DEVICE on foreign bridge neighbors Some DSA switches (and not only) cannot learn source MAC addresses from packets injected from the CPU. They only perform hardware address learning from inbound traffic. This can be problematic when we have a bridge spanning some DSA switch ports and some non-DSA ports (which we'll call "foreign interfaces" from DSA's perspective). There are 2 classes of problems created by the lack of learning on CPU-injected traffic: - excessive flooding, due to the fact that DSA treats those addresses as unknown - the risk of stale routes, which can lead to temporary packet loss To illustrate the second class, consider the following situation, which is common in production equipment (wireless access points, where there is a WLAN interface and an Ethernet switch, and these form a single bridging domain). AP 1: +------------------------------------------------------------------------+ | br0 | +------------------------------------------------------------------------+ +------------+ +------------+ +------------+ +------------+ +------------+ | swp0 | | swp1 | | swp2 | | swp3 | | wlan0 | +------------+ +------------+ +------------+ +------------+ +------------+ | ^ ^ | | | | | | | Client A Client B | | | +------------+ +------------+ +------------+ +------------+ +------------+ | swp0 | | swp1 | | swp2 | | swp3 | | wlan0 | +------------+ +------------+ +------------+ +------------+ +------------+ +------------------------------------------------------------------------+ | br0 | +------------------------------------------------------------------------+ AP 2 - br0 of AP 1 will know that Clients A and B are reachable via wlan0 - the hardware fdb of a DSA switch driver today is not kept in sync with the software entries on other bridge ports, so it will not know that clients A and B are reachable via the CPU port UNLESS the hardware switch itself performs SA learning from traffic injected from the CPU. Nonetheless, a substantial number of switches don't. - the hardware fdb of the DSA switch on AP 2 may autonomously learn that Client A and B are reachable through swp0. Therefore, the software br0 of AP 2 also may or may not learn this. In the example we're illustrating, some Ethernet traffic has been going on, and br0 from AP 2 has indeed learnt that it can reach Client B through swp0. One of the wireless clients, say Client B, disconnects from AP 1 and roams to AP 2. The topology now looks like this: AP 1: +------------------------------------------------------------------------+ | br0 | +------------------------------------------------------------------------+ +------------+ +------------+ +------------+ +------------+ +------------+ | swp0 | | swp1 | | swp2 | | swp3 | | wlan0 | +------------+ +------------+ +------------+ +------------+ +------------+ | ^ | | | Client A | | | Client B | | | v +------------+ +------------+ +------------+ +------------+ +------------+ | swp0 | | swp1 | | swp2 | | swp3 | | wlan0 | +------------+ +------------+ +------------+ +------------+ +------------+ +------------------------------------------------------------------------+ | br0 | +------------------------------------------------------------------------+ AP 2 - br0 of AP 1 still knows that Client A is reachable via wlan0 (no change) - br0 of AP 1 will (possibly) know that Client B has left wlan0. There are cases where it might never find out though. Either way, DSA today does not process that notification in any way. - the hardware FDB of the DSA switch on AP 1 may learn autonomously that Client B can be reached via swp0, if it receives any packet with Client 1's source MAC address over Ethernet. - the hardware FDB of the DSA switch on AP 2 still thinks that Client B can be reached via swp0. It does not know that it has roamed to wlan0, because it doesn't perform SA learning from the CPU port. Now Client A contacts Client B. AP 1 routes the packet fine towards swp0 and delivers it on the Ethernet segment. AP 2 sees a frame on swp0 and its fdb says that the destination is swp0. Hairpinning is disabled => drop. This problem comes from the fact that these switches have a 'blind spot' for addresses coming from software bridging. The generic solution is not to assume that hardware learning can be enabled somehow, but to listen to more bridge learning events. It turns out that the bridge driver does learn in software from all inbound frames, in __br_handle_local_finish. A proper SWITCHDEV_FDB_ADD_TO_DEVICE notification is emitted for the addresses serviced by the bridge on 'foreign' interfaces. The software bridge also does the right thing on migration, by notifying that the old entry is deleted, so that does not need to be special-cased in DSA. When it is deleted, we just need to delete our static FDB entry towards the CPU too, and wait. The problem is that DSA currently only cares about SWITCHDEV_FDB_ADD_TO_DEVICE events received on its own interfaces, such as static FDB entries. Luckily we can change that, and DSA can listen to all switchdev FDB add/del events in the system and figure out if those events were emitted by a bridge that spans at least one of DSA's own ports. In case that is true, DSA will also offload that address towards its own CPU port, in the eventuality that there might be bridge clients attached to the DSA switch who want to talk to the station connected to the foreign interface. In terms of implementation, we need to keep the fdb_info->added_by_user check for the case where the switchdev event was targeted directly at a DSA switch port. But we don't need to look at that flag for snooped events. So the check is currently too late, we need to move it earlier. This also simplifies the code a bit, since we avoid uselessly allocating and freeing switchdev_work. We could probably do some improvements in the future. For example, multi-bridge support is rudimentary at the moment. If there are two bridges spanning a DSA switch's ports, and both of them need to service the same MAC address, then what will happen is that the migration of one of those stations will trigger the deletion of the FDB entry from the CPU port while it is still used by other bridge. That could be improved with reference counting but is left for another time. This behavior needs to be enabled at driver level by setting ds->assisted_learning_on_cpu_port = true. This is because we don't want to inflict a potential performance penalty (accesses through MDIO/I2C/SPI are expensive) to hardware that really doesn't need it because address learning on the CPU port works there. Reported-by: DENG Qingfang <dqfext@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-06 09:51:35 +00:00
net: dsa: use switchdev_handle_fdb_{add,del}_to_device Using the new fan-out helper for FDB entries installed on the software bridge, we can install host addresses with the proper refcount on the CPU port, such that this case: ip link set swp0 master br0 ip link set swp1 master br0 ip link set swp2 master br0 ip link set swp3 master br0 ip link set br0 address 00:01:02:03:04:05 ip link set swp3 nomaster works properly and the br0 address remains installed as a host entry with refcount 3 instead of getting deleted. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-19 13:51:40 +00:00
if (netif_is_bridge_master(foreign_dev))
net: dsa: rename dsa_port_offloads_bridge to dsa_port_offloads_bridge_dev Currently the majority of dsa_port_bridge_dev_get() calls in drivers is just to check whether a port is under the bridge device provided as argument by the DSA API. We'd like to change that DSA API so that a more complex structure is provided as argument. To keep things more generic, and considering that the new complex structure will be provided by value and not by reference, direct comparisons between dp->bridge and the provided bridge will be broken. The generic way to do the checking would simply be to do something like dsa_port_offloads_bridge(dp, &bridge). But there's a problem, we already have a function named that way, which actually takes a bridge_dev net_device as argument. Rename it so that we can use dsa_port_offloads_bridge for something else. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-06 16:57:54 +00:00
return !dsa_tree_offloads_bridge_dev(dst, foreign_dev);
net: dsa: use switchdev_handle_fdb_{add,del}_to_device Using the new fan-out helper for FDB entries installed on the software bridge, we can install host addresses with the proper refcount on the CPU port, such that this case: ip link set swp0 master br0 ip link set swp1 master br0 ip link set swp2 master br0 ip link set swp3 master br0 ip link set br0 address 00:01:02:03:04:05 ip link set swp3 nomaster works properly and the br0 address remains installed as a host entry with refcount 3 instead of getting deleted. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-19 13:51:40 +00:00
if (netif_is_bridge_port(foreign_dev))
return !dsa_tree_offloads_bridge_port(dst, foreign_dev);
/* Everything else is foreign */
return true;
net: dsa: listen for SWITCHDEV_{FDB,DEL}_ADD_TO_DEVICE on foreign bridge neighbors Some DSA switches (and not only) cannot learn source MAC addresses from packets injected from the CPU. They only perform hardware address learning from inbound traffic. This can be problematic when we have a bridge spanning some DSA switch ports and some non-DSA ports (which we'll call "foreign interfaces" from DSA's perspective). There are 2 classes of problems created by the lack of learning on CPU-injected traffic: - excessive flooding, due to the fact that DSA treats those addresses as unknown - the risk of stale routes, which can lead to temporary packet loss To illustrate the second class, consider the following situation, which is common in production equipment (wireless access points, where there is a WLAN interface and an Ethernet switch, and these form a single bridging domain). AP 1: +------------------------------------------------------------------------+ | br0 | +------------------------------------------------------------------------+ +------------+ +------------+ +------------+ +------------+ +------------+ | swp0 | | swp1 | | swp2 | | swp3 | | wlan0 | +------------+ +------------+ +------------+ +------------+ +------------+ | ^ ^ | | | | | | | Client A Client B | | | +------------+ +------------+ +------------+ +------------+ +------------+ | swp0 | | swp1 | | swp2 | | swp3 | | wlan0 | +------------+ +------------+ +------------+ +------------+ +------------+ +------------------------------------------------------------------------+ | br0 | +------------------------------------------------------------------------+ AP 2 - br0 of AP 1 will know that Clients A and B are reachable via wlan0 - the hardware fdb of a DSA switch driver today is not kept in sync with the software entries on other bridge ports, so it will not know that clients A and B are reachable via the CPU port UNLESS the hardware switch itself performs SA learning from traffic injected from the CPU. Nonetheless, a substantial number of switches don't. - the hardware fdb of the DSA switch on AP 2 may autonomously learn that Client A and B are reachable through swp0. Therefore, the software br0 of AP 2 also may or may not learn this. In the example we're illustrating, some Ethernet traffic has been going on, and br0 from AP 2 has indeed learnt that it can reach Client B through swp0. One of the wireless clients, say Client B, disconnects from AP 1 and roams to AP 2. The topology now looks like this: AP 1: +------------------------------------------------------------------------+ | br0 | +------------------------------------------------------------------------+ +------------+ +------------+ +------------+ +------------+ +------------+ | swp0 | | swp1 | | swp2 | | swp3 | | wlan0 | +------------+ +------------+ +------------+ +------------+ +------------+ | ^ | | | Client A | | | Client B | | | v +------------+ +------------+ +------------+ +------------+ +------------+ | swp0 | | swp1 | | swp2 | | swp3 | | wlan0 | +------------+ +------------+ +------------+ +------------+ +------------+ +------------------------------------------------------------------------+ | br0 | +------------------------------------------------------------------------+ AP 2 - br0 of AP 1 still knows that Client A is reachable via wlan0 (no change) - br0 of AP 1 will (possibly) know that Client B has left wlan0. There are cases where it might never find out though. Either way, DSA today does not process that notification in any way. - the hardware FDB of the DSA switch on AP 1 may learn autonomously that Client B can be reached via swp0, if it receives any packet with Client 1's source MAC address over Ethernet. - the hardware FDB of the DSA switch on AP 2 still thinks that Client B can be reached via swp0. It does not know that it has roamed to wlan0, because it doesn't perform SA learning from the CPU port. Now Client A contacts Client B. AP 1 routes the packet fine towards swp0 and delivers it on the Ethernet segment. AP 2 sees a frame on swp0 and its fdb says that the destination is swp0. Hairpinning is disabled => drop. This problem comes from the fact that these switches have a 'blind spot' for addresses coming from software bridging. The generic solution is not to assume that hardware learning can be enabled somehow, but to listen to more bridge learning events. It turns out that the bridge driver does learn in software from all inbound frames, in __br_handle_local_finish. A proper SWITCHDEV_FDB_ADD_TO_DEVICE notification is emitted for the addresses serviced by the bridge on 'foreign' interfaces. The software bridge also does the right thing on migration, by notifying that the old entry is deleted, so that does not need to be special-cased in DSA. When it is deleted, we just need to delete our static FDB entry towards the CPU too, and wait. The problem is that DSA currently only cares about SWITCHDEV_FDB_ADD_TO_DEVICE events received on its own interfaces, such as static FDB entries. Luckily we can change that, and DSA can listen to all switchdev FDB add/del events in the system and figure out if those events were emitted by a bridge that spans at least one of DSA's own ports. In case that is true, DSA will also offload that address towards its own CPU port, in the eventuality that there might be bridge clients attached to the DSA switch who want to talk to the station connected to the foreign interface. In terms of implementation, we need to keep the fdb_info->added_by_user check for the case where the switchdev event was targeted directly at a DSA switch port. But we don't need to look at that flag for snooped events. So the check is currently too late, we need to move it earlier. This also simplifies the code a bit, since we avoid uselessly allocating and freeing switchdev_work. We could probably do some improvements in the future. For example, multi-bridge support is rudimentary at the moment. If there are two bridges spanning a DSA switch's ports, and both of them need to service the same MAC address, then what will happen is that the migration of one of those stations will trigger the deletion of the FDB entry from the CPU port while it is still used by other bridge. That could be improved with reference counting but is left for another time. This behavior needs to be enabled at driver level by setting ds->assisted_learning_on_cpu_port = true. This is because we don't want to inflict a potential performance penalty (accesses through MDIO/I2C/SPI are expensive) to hardware that really doesn't need it because address learning on the CPU port works there. Reported-by: DENG Qingfang <dqfext@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-06 09:51:35 +00:00
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_fdb_event(struct net_device *dev,
struct net_device *orig_dev,
unsigned long event, const void *ctx,
const struct switchdev_notifier_fdb_info *fdb_info)
net: dsa: listen for SWITCHDEV_{FDB,DEL}_ADD_TO_DEVICE on foreign bridge neighbors Some DSA switches (and not only) cannot learn source MAC addresses from packets injected from the CPU. They only perform hardware address learning from inbound traffic. This can be problematic when we have a bridge spanning some DSA switch ports and some non-DSA ports (which we'll call "foreign interfaces" from DSA's perspective). There are 2 classes of problems created by the lack of learning on CPU-injected traffic: - excessive flooding, due to the fact that DSA treats those addresses as unknown - the risk of stale routes, which can lead to temporary packet loss To illustrate the second class, consider the following situation, which is common in production equipment (wireless access points, where there is a WLAN interface and an Ethernet switch, and these form a single bridging domain). AP 1: +------------------------------------------------------------------------+ | br0 | +------------------------------------------------------------------------+ +------------+ +------------+ +------------+ +------------+ +------------+ | swp0 | | swp1 | | swp2 | | swp3 | | wlan0 | +------------+ +------------+ +------------+ +------------+ +------------+ | ^ ^ | | | | | | | Client A Client B | | | +------------+ +------------+ +------------+ +------------+ +------------+ | swp0 | | swp1 | | swp2 | | swp3 | | wlan0 | +------------+ +------------+ +------------+ +------------+ +------------+ +------------------------------------------------------------------------+ | br0 | +------------------------------------------------------------------------+ AP 2 - br0 of AP 1 will know that Clients A and B are reachable via wlan0 - the hardware fdb of a DSA switch driver today is not kept in sync with the software entries on other bridge ports, so it will not know that clients A and B are reachable via the CPU port UNLESS the hardware switch itself performs SA learning from traffic injected from the CPU. Nonetheless, a substantial number of switches don't. - the hardware fdb of the DSA switch on AP 2 may autonomously learn that Client A and B are reachable through swp0. Therefore, the software br0 of AP 2 also may or may not learn this. In the example we're illustrating, some Ethernet traffic has been going on, and br0 from AP 2 has indeed learnt that it can reach Client B through swp0. One of the wireless clients, say Client B, disconnects from AP 1 and roams to AP 2. The topology now looks like this: AP 1: +------------------------------------------------------------------------+ | br0 | +------------------------------------------------------------------------+ +------------+ +------------+ +------------+ +------------+ +------------+ | swp0 | | swp1 | | swp2 | | swp3 | | wlan0 | +------------+ +------------+ +------------+ +------------+ +------------+ | ^ | | | Client A | | | Client B | | | v +------------+ +------------+ +------------+ +------------+ +------------+ | swp0 | | swp1 | | swp2 | | swp3 | | wlan0 | +------------+ +------------+ +------------+ +------------+ +------------+ +------------------------------------------------------------------------+ | br0 | +------------------------------------------------------------------------+ AP 2 - br0 of AP 1 still knows that Client A is reachable via wlan0 (no change) - br0 of AP 1 will (possibly) know that Client B has left wlan0. There are cases where it might never find out though. Either way, DSA today does not process that notification in any way. - the hardware FDB of the DSA switch on AP 1 may learn autonomously that Client B can be reached via swp0, if it receives any packet with Client 1's source MAC address over Ethernet. - the hardware FDB of the DSA switch on AP 2 still thinks that Client B can be reached via swp0. It does not know that it has roamed to wlan0, because it doesn't perform SA learning from the CPU port. Now Client A contacts Client B. AP 1 routes the packet fine towards swp0 and delivers it on the Ethernet segment. AP 2 sees a frame on swp0 and its fdb says that the destination is swp0. Hairpinning is disabled => drop. This problem comes from the fact that these switches have a 'blind spot' for addresses coming from software bridging. The generic solution is not to assume that hardware learning can be enabled somehow, but to listen to more bridge learning events. It turns out that the bridge driver does learn in software from all inbound frames, in __br_handle_local_finish. A proper SWITCHDEV_FDB_ADD_TO_DEVICE notification is emitted for the addresses serviced by the bridge on 'foreign' interfaces. The software bridge also does the right thing on migration, by notifying that the old entry is deleted, so that does not need to be special-cased in DSA. When it is deleted, we just need to delete our static FDB entry towards the CPU too, and wait. The problem is that DSA currently only cares about SWITCHDEV_FDB_ADD_TO_DEVICE events received on its own interfaces, such as static FDB entries. Luckily we can change that, and DSA can listen to all switchdev FDB add/del events in the system and figure out if those events were emitted by a bridge that spans at least one of DSA's own ports. In case that is true, DSA will also offload that address towards its own CPU port, in the eventuality that there might be bridge clients attached to the DSA switch who want to talk to the station connected to the foreign interface. In terms of implementation, we need to keep the fdb_info->added_by_user check for the case where the switchdev event was targeted directly at a DSA switch port. But we don't need to look at that flag for snooped events. So the check is currently too late, we need to move it earlier. This also simplifies the code a bit, since we avoid uselessly allocating and freeing switchdev_work. We could probably do some improvements in the future. For example, multi-bridge support is rudimentary at the moment. If there are two bridges spanning a DSA switch's ports, and both of them need to service the same MAC address, then what will happen is that the migration of one of those stations will trigger the deletion of the FDB entry from the CPU port while it is still used by other bridge. That could be improved with reference counting but is left for another time. This behavior needs to be enabled at driver level by setting ds->assisted_learning_on_cpu_port = true. This is because we don't want to inflict a potential performance penalty (accesses through MDIO/I2C/SPI are expensive) to hardware that really doesn't need it because address learning on the CPU port works there. Reported-by: DENG Qingfang <dqfext@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-06 09:51:35 +00:00
{
net: dsa: use switchdev_handle_fdb_{add,del}_to_device Using the new fan-out helper for FDB entries installed on the software bridge, we can install host addresses with the proper refcount on the CPU port, such that this case: ip link set swp0 master br0 ip link set swp1 master br0 ip link set swp2 master br0 ip link set swp3 master br0 ip link set br0 address 00:01:02:03:04:05 ip link set swp3 nomaster works properly and the br0 address remains installed as a host entry with refcount 3 instead of getting deleted. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-19 13:51:40 +00:00
struct dsa_switchdev_event_work *switchdev_work;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct dsa_port *dp = dsa_user_to_port(dev);
net: dsa: use switchdev_handle_fdb_{add,del}_to_device Using the new fan-out helper for FDB entries installed on the software bridge, we can install host addresses with the proper refcount on the CPU port, such that this case: ip link set swp0 master br0 ip link set swp1 master br0 ip link set swp2 master br0 ip link set swp3 master br0 ip link set br0 address 00:01:02:03:04:05 ip link set swp3 nomaster works properly and the br0 address remains installed as a host entry with refcount 3 instead of getting deleted. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-19 13:51:40 +00:00
bool host_addr = fdb_info->is_local;
struct dsa_switch *ds = dp->ds;
if (ctx && ctx != dp)
return 0;
net: dsa: Never offload FDB entries on standalone ports If a port joins a bridge that it can't offload, it will fallback to standalone mode and software bridging. In this case, we never want to offload any FDB entries to hardware either. Previously, for host addresses, we would eventually end up in dsa_port_bridge_host_fdb_add, which would unconditionally dereference dp->bridge and cause a segfault. Fixes: c26933639b54 ("net: dsa: request drivers to perform FDB isolation") Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220315233033.1468071-1-tobias@waldekranz.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-15 23:30:33 +00:00
if (!dp->bridge)
return 0;
net: dsa: support FDB events on offloaded LAG interfaces This change introduces support for installing static FDB entries towards a bridge port that is a LAG of multiple DSA switch ports, as well as support for filtering towards the CPU local FDB entries emitted for LAG interfaces that are bridge ports. Conceptually, host addresses on LAG ports are identical to what we do for plain bridge ports. Whereas FDB entries _towards_ a LAG can't simply be replicated towards all member ports like we do for multicast, or VLAN. Instead we need new driver API. Hardware usually considers a LAG to be a "logical port", and sets the entire LAG as the forwarding destination. The physical egress port selection within the LAG is made by hashing policy, as usual. To represent the logical port corresponding to the LAG, we pass by value a copy of the dsa_lag structure to all switches in the tree that have at least one port in that LAG. To illustrate why a refcounted list of FDB entries is needed in struct dsa_lag, it is enough to say that: - a LAG may be a bridge port and may therefore receive FDB events even while it isn't yet offloaded by any DSA interface - DSA interfaces may be removed from a LAG while that is a bridge port; we don't want FDB entries lingering around, but we don't want to remove entries that are still in use, either For all the cases below to work, the idea is to always keep an FDB entry on a LAG with a reference count equal to the DSA member ports. So: - if a port joins a LAG, it requests the bridge to replay the FDB, and the FDB entries get created, or their refcount gets bumped by one - if a port leaves a LAG, the FDB replay deletes or decrements refcount by one - if an FDB is installed towards a LAG with ports already present, that entry is created (if it doesn't exist) and its refcount is bumped by the amount of ports already present in the LAG echo "Adding FDB entry to bond with existing ports" ip link del bond0 ip link add bond0 type bond mode 802.3ad ip link set swp1 down && ip link set swp1 master bond0 && ip link set swp1 up ip link set swp2 down && ip link set swp2 master bond0 && ip link set swp2 up ip link del br0 ip link add br0 type bridge ip link set bond0 master br0 bridge fdb add dev bond0 00:01:02:03:04:05 master static ip link del br0 ip link del bond0 echo "Adding FDB entry to empty bond" ip link del bond0 ip link add bond0 type bond mode 802.3ad ip link del br0 ip link add br0 type bridge ip link set bond0 master br0 bridge fdb add dev bond0 00:01:02:03:04:05 master static ip link set swp1 down && ip link set swp1 master bond0 && ip link set swp1 up ip link set swp2 down && ip link set swp2 master bond0 && ip link set swp2 up ip link del br0 ip link del bond0 echo "Adding FDB entry to empty bond, then removing ports one by one" ip link del bond0 ip link add bond0 type bond mode 802.3ad ip link del br0 ip link add br0 type bridge ip link set bond0 master br0 bridge fdb add dev bond0 00:01:02:03:04:05 master static ip link set swp1 down && ip link set swp1 master bond0 && ip link set swp1 up ip link set swp2 down && ip link set swp2 master bond0 && ip link set swp2 up ip link set swp1 nomaster ip link set swp2 nomaster ip link del br0 ip link del bond0 Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-23 14:00:53 +00:00
if (switchdev_fdb_is_dynamically_learned(fdb_info)) {
if (dsa_port_offloads_bridge_port(dp, orig_dev))
return 0;
net: dsa: use switchdev_handle_fdb_{add,del}_to_device Using the new fan-out helper for FDB entries installed on the software bridge, we can install host addresses with the proper refcount on the CPU port, such that this case: ip link set swp0 master br0 ip link set swp1 master br0 ip link set swp2 master br0 ip link set swp3 master br0 ip link set br0 address 00:01:02:03:04:05 ip link set swp3 nomaster works properly and the br0 address remains installed as a host entry with refcount 3 instead of getting deleted. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-19 13:51:40 +00:00
net: dsa: support FDB events on offloaded LAG interfaces This change introduces support for installing static FDB entries towards a bridge port that is a LAG of multiple DSA switch ports, as well as support for filtering towards the CPU local FDB entries emitted for LAG interfaces that are bridge ports. Conceptually, host addresses on LAG ports are identical to what we do for plain bridge ports. Whereas FDB entries _towards_ a LAG can't simply be replicated towards all member ports like we do for multicast, or VLAN. Instead we need new driver API. Hardware usually considers a LAG to be a "logical port", and sets the entire LAG as the forwarding destination. The physical egress port selection within the LAG is made by hashing policy, as usual. To represent the logical port corresponding to the LAG, we pass by value a copy of the dsa_lag structure to all switches in the tree that have at least one port in that LAG. To illustrate why a refcounted list of FDB entries is needed in struct dsa_lag, it is enough to say that: - a LAG may be a bridge port and may therefore receive FDB events even while it isn't yet offloaded by any DSA interface - DSA interfaces may be removed from a LAG while that is a bridge port; we don't want FDB entries lingering around, but we don't want to remove entries that are still in use, either For all the cases below to work, the idea is to always keep an FDB entry on a LAG with a reference count equal to the DSA member ports. So: - if a port joins a LAG, it requests the bridge to replay the FDB, and the FDB entries get created, or their refcount gets bumped by one - if a port leaves a LAG, the FDB replay deletes or decrements refcount by one - if an FDB is installed towards a LAG with ports already present, that entry is created (if it doesn't exist) and its refcount is bumped by the amount of ports already present in the LAG echo "Adding FDB entry to bond with existing ports" ip link del bond0 ip link add bond0 type bond mode 802.3ad ip link set swp1 down && ip link set swp1 master bond0 && ip link set swp1 up ip link set swp2 down && ip link set swp2 master bond0 && ip link set swp2 up ip link del br0 ip link add br0 type bridge ip link set bond0 master br0 bridge fdb add dev bond0 00:01:02:03:04:05 master static ip link del br0 ip link del bond0 echo "Adding FDB entry to empty bond" ip link del bond0 ip link add bond0 type bond mode 802.3ad ip link del br0 ip link add br0 type bridge ip link set bond0 master br0 bridge fdb add dev bond0 00:01:02:03:04:05 master static ip link set swp1 down && ip link set swp1 master bond0 && ip link set swp1 up ip link set swp2 down && ip link set swp2 master bond0 && ip link set swp2 up ip link del br0 ip link del bond0 echo "Adding FDB entry to empty bond, then removing ports one by one" ip link del bond0 ip link add bond0 type bond mode 802.3ad ip link del br0 ip link add br0 type bridge ip link set bond0 master br0 bridge fdb add dev bond0 00:01:02:03:04:05 master static ip link set swp1 down && ip link set swp1 master bond0 && ip link set swp1 up ip link set swp2 down && ip link set swp2 master bond0 && ip link set swp2 up ip link set swp1 nomaster ip link set swp2 nomaster ip link del br0 ip link del bond0 Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-23 14:00:53 +00:00
/* FDB entries learned by the software bridge or by foreign
* bridge ports should be installed as host addresses only if
* the driver requests assisted learning.
*/
if (!ds->assisted_learning_on_cpu_port)
return 0;
}
net: dsa: use switchdev_handle_fdb_{add,del}_to_device Using the new fan-out helper for FDB entries installed on the software bridge, we can install host addresses with the proper refcount on the CPU port, such that this case: ip link set swp0 master br0 ip link set swp1 master br0 ip link set swp2 master br0 ip link set swp3 master br0 ip link set br0 address 00:01:02:03:04:05 ip link set swp3 nomaster works properly and the br0 address remains installed as a host entry with refcount 3 instead of getting deleted. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-19 13:51:40 +00:00
/* Also treat FDB entries on foreign interfaces bridged with us as host
* addresses.
*/
if (dsa_foreign_dev_check(dev, orig_dev))
host_addr = true;
net: dsa: support FDB events on offloaded LAG interfaces This change introduces support for installing static FDB entries towards a bridge port that is a LAG of multiple DSA switch ports, as well as support for filtering towards the CPU local FDB entries emitted for LAG interfaces that are bridge ports. Conceptually, host addresses on LAG ports are identical to what we do for plain bridge ports. Whereas FDB entries _towards_ a LAG can't simply be replicated towards all member ports like we do for multicast, or VLAN. Instead we need new driver API. Hardware usually considers a LAG to be a "logical port", and sets the entire LAG as the forwarding destination. The physical egress port selection within the LAG is made by hashing policy, as usual. To represent the logical port corresponding to the LAG, we pass by value a copy of the dsa_lag structure to all switches in the tree that have at least one port in that LAG. To illustrate why a refcounted list of FDB entries is needed in struct dsa_lag, it is enough to say that: - a LAG may be a bridge port and may therefore receive FDB events even while it isn't yet offloaded by any DSA interface - DSA interfaces may be removed from a LAG while that is a bridge port; we don't want FDB entries lingering around, but we don't want to remove entries that are still in use, either For all the cases below to work, the idea is to always keep an FDB entry on a LAG with a reference count equal to the DSA member ports. So: - if a port joins a LAG, it requests the bridge to replay the FDB, and the FDB entries get created, or their refcount gets bumped by one - if a port leaves a LAG, the FDB replay deletes or decrements refcount by one - if an FDB is installed towards a LAG with ports already present, that entry is created (if it doesn't exist) and its refcount is bumped by the amount of ports already present in the LAG echo "Adding FDB entry to bond with existing ports" ip link del bond0 ip link add bond0 type bond mode 802.3ad ip link set swp1 down && ip link set swp1 master bond0 && ip link set swp1 up ip link set swp2 down && ip link set swp2 master bond0 && ip link set swp2 up ip link del br0 ip link add br0 type bridge ip link set bond0 master br0 bridge fdb add dev bond0 00:01:02:03:04:05 master static ip link del br0 ip link del bond0 echo "Adding FDB entry to empty bond" ip link del bond0 ip link add bond0 type bond mode 802.3ad ip link del br0 ip link add br0 type bridge ip link set bond0 master br0 bridge fdb add dev bond0 00:01:02:03:04:05 master static ip link set swp1 down && ip link set swp1 master bond0 && ip link set swp1 up ip link set swp2 down && ip link set swp2 master bond0 && ip link set swp2 up ip link del br0 ip link del bond0 echo "Adding FDB entry to empty bond, then removing ports one by one" ip link del bond0 ip link add bond0 type bond mode 802.3ad ip link del br0 ip link add br0 type bridge ip link set bond0 master br0 bridge fdb add dev bond0 00:01:02:03:04:05 master static ip link set swp1 down && ip link set swp1 master bond0 && ip link set swp1 up ip link set swp2 down && ip link set swp2 master bond0 && ip link set swp2 up ip link set swp1 nomaster ip link set swp2 nomaster ip link del br0 ip link del bond0 Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-23 14:00:53 +00:00
/* Check early that we're not doing work in vain.
* Host addresses on LAG ports still require regular FDB ops,
* since the CPU port isn't in a LAG.
*/
if (dp->lag && !host_addr) {
if (!ds->ops->lag_fdb_add || !ds->ops->lag_fdb_del)
return -EOPNOTSUPP;
} else {
if (!ds->ops->port_fdb_add || !ds->ops->port_fdb_del)
return -EOPNOTSUPP;
}
net: dsa: use switchdev_handle_fdb_{add,del}_to_device Using the new fan-out helper for FDB entries installed on the software bridge, we can install host addresses with the proper refcount on the CPU port, such that this case: ip link set swp0 master br0 ip link set swp1 master br0 ip link set swp2 master br0 ip link set swp3 master br0 ip link set br0 address 00:01:02:03:04:05 ip link set swp3 nomaster works properly and the br0 address remains installed as a host entry with refcount 3 instead of getting deleted. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-19 13:51:40 +00:00
switchdev_work = kzalloc(sizeof(*switchdev_work), GFP_ATOMIC);
if (!switchdev_work)
return -ENOMEM;
netdev_dbg(dev, "%s FDB entry towards %s, addr %pM vid %d%s\n",
event == SWITCHDEV_FDB_ADD_TO_DEVICE ? "Adding" : "Deleting",
orig_dev->name, fdb_info->addr, fdb_info->vid,
host_addr ? " as host address" : "");
net: dsa: listen for SWITCHDEV_{FDB,DEL}_ADD_TO_DEVICE on foreign bridge neighbors Some DSA switches (and not only) cannot learn source MAC addresses from packets injected from the CPU. They only perform hardware address learning from inbound traffic. This can be problematic when we have a bridge spanning some DSA switch ports and some non-DSA ports (which we'll call "foreign interfaces" from DSA's perspective). There are 2 classes of problems created by the lack of learning on CPU-injected traffic: - excessive flooding, due to the fact that DSA treats those addresses as unknown - the risk of stale routes, which can lead to temporary packet loss To illustrate the second class, consider the following situation, which is common in production equipment (wireless access points, where there is a WLAN interface and an Ethernet switch, and these form a single bridging domain). AP 1: +------------------------------------------------------------------------+ | br0 | +------------------------------------------------------------------------+ +------------+ +------------+ +------------+ +------------+ +------------+ | swp0 | | swp1 | | swp2 | | swp3 | | wlan0 | +------------+ +------------+ +------------+ +------------+ +------------+ | ^ ^ | | | | | | | Client A Client B | | | +------------+ +------------+ +------------+ +------------+ +------------+ | swp0 | | swp1 | | swp2 | | swp3 | | wlan0 | +------------+ +------------+ +------------+ +------------+ +------------+ +------------------------------------------------------------------------+ | br0 | +------------------------------------------------------------------------+ AP 2 - br0 of AP 1 will know that Clients A and B are reachable via wlan0 - the hardware fdb of a DSA switch driver today is not kept in sync with the software entries on other bridge ports, so it will not know that clients A and B are reachable via the CPU port UNLESS the hardware switch itself performs SA learning from traffic injected from the CPU. Nonetheless, a substantial number of switches don't. - the hardware fdb of the DSA switch on AP 2 may autonomously learn that Client A and B are reachable through swp0. Therefore, the software br0 of AP 2 also may or may not learn this. In the example we're illustrating, some Ethernet traffic has been going on, and br0 from AP 2 has indeed learnt that it can reach Client B through swp0. One of the wireless clients, say Client B, disconnects from AP 1 and roams to AP 2. The topology now looks like this: AP 1: +------------------------------------------------------------------------+ | br0 | +------------------------------------------------------------------------+ +------------+ +------------+ +------------+ +------------+ +------------+ | swp0 | | swp1 | | swp2 | | swp3 | | wlan0 | +------------+ +------------+ +------------+ +------------+ +------------+ | ^ | | | Client A | | | Client B | | | v +------------+ +------------+ +------------+ +------------+ +------------+ | swp0 | | swp1 | | swp2 | | swp3 | | wlan0 | +------------+ +------------+ +------------+ +------------+ +------------+ +------------------------------------------------------------------------+ | br0 | +------------------------------------------------------------------------+ AP 2 - br0 of AP 1 still knows that Client A is reachable via wlan0 (no change) - br0 of AP 1 will (possibly) know that Client B has left wlan0. There are cases where it might never find out though. Either way, DSA today does not process that notification in any way. - the hardware FDB of the DSA switch on AP 1 may learn autonomously that Client B can be reached via swp0, if it receives any packet with Client 1's source MAC address over Ethernet. - the hardware FDB of the DSA switch on AP 2 still thinks that Client B can be reached via swp0. It does not know that it has roamed to wlan0, because it doesn't perform SA learning from the CPU port. Now Client A contacts Client B. AP 1 routes the packet fine towards swp0 and delivers it on the Ethernet segment. AP 2 sees a frame on swp0 and its fdb says that the destination is swp0. Hairpinning is disabled => drop. This problem comes from the fact that these switches have a 'blind spot' for addresses coming from software bridging. The generic solution is not to assume that hardware learning can be enabled somehow, but to listen to more bridge learning events. It turns out that the bridge driver does learn in software from all inbound frames, in __br_handle_local_finish. A proper SWITCHDEV_FDB_ADD_TO_DEVICE notification is emitted for the addresses serviced by the bridge on 'foreign' interfaces. The software bridge also does the right thing on migration, by notifying that the old entry is deleted, so that does not need to be special-cased in DSA. When it is deleted, we just need to delete our static FDB entry towards the CPU too, and wait. The problem is that DSA currently only cares about SWITCHDEV_FDB_ADD_TO_DEVICE events received on its own interfaces, such as static FDB entries. Luckily we can change that, and DSA can listen to all switchdev FDB add/del events in the system and figure out if those events were emitted by a bridge that spans at least one of DSA's own ports. In case that is true, DSA will also offload that address towards its own CPU port, in the eventuality that there might be bridge clients attached to the DSA switch who want to talk to the station connected to the foreign interface. In terms of implementation, we need to keep the fdb_info->added_by_user check for the case where the switchdev event was targeted directly at a DSA switch port. But we don't need to look at that flag for snooped events. So the check is currently too late, we need to move it earlier. This also simplifies the code a bit, since we avoid uselessly allocating and freeing switchdev_work. We could probably do some improvements in the future. For example, multi-bridge support is rudimentary at the moment. If there are two bridges spanning a DSA switch's ports, and both of them need to service the same MAC address, then what will happen is that the migration of one of those stations will trigger the deletion of the FDB entry from the CPU port while it is still used by other bridge. That could be improved with reference counting but is left for another time. This behavior needs to be enabled at driver level by setting ds->assisted_learning_on_cpu_port = true. This is because we don't want to inflict a potential performance penalty (accesses through MDIO/I2C/SPI are expensive) to hardware that really doesn't need it because address learning on the CPU port works there. Reported-by: DENG Qingfang <dqfext@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-06 09:51:35 +00:00
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
INIT_WORK(&switchdev_work->work, dsa_user_switchdev_event_work);
net: dsa: use switchdev_handle_fdb_{add,del}_to_device Using the new fan-out helper for FDB entries installed on the software bridge, we can install host addresses with the proper refcount on the CPU port, such that this case: ip link set swp0 master br0 ip link set swp1 master br0 ip link set swp2 master br0 ip link set swp3 master br0 ip link set br0 address 00:01:02:03:04:05 ip link set swp3 nomaster works properly and the br0 address remains installed as a host entry with refcount 3 instead of getting deleted. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-19 13:51:40 +00:00
switchdev_work->event = event;
switchdev_work->dev = dev;
net: dsa: call SWITCHDEV_FDB_OFFLOADED for the orig_dev When switchdev_handle_fdb_event_to_device() replicates a FDB event emitted for the bridge or for a LAG port and DSA offloads that, we should notify back to switchdev that the FDB entry on the original device is what was offloaded, not on the DSA slave devices that the event is replicated on. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-23 14:00:52 +00:00
switchdev_work->orig_dev = orig_dev;
net: dsa: listen for SWITCHDEV_{FDB,DEL}_ADD_TO_DEVICE on foreign bridge neighbors Some DSA switches (and not only) cannot learn source MAC addresses from packets injected from the CPU. They only perform hardware address learning from inbound traffic. This can be problematic when we have a bridge spanning some DSA switch ports and some non-DSA ports (which we'll call "foreign interfaces" from DSA's perspective). There are 2 classes of problems created by the lack of learning on CPU-injected traffic: - excessive flooding, due to the fact that DSA treats those addresses as unknown - the risk of stale routes, which can lead to temporary packet loss To illustrate the second class, consider the following situation, which is common in production equipment (wireless access points, where there is a WLAN interface and an Ethernet switch, and these form a single bridging domain). AP 1: +------------------------------------------------------------------------+ | br0 | +------------------------------------------------------------------------+ +------------+ +------------+ +------------+ +------------+ +------------+ | swp0 | | swp1 | | swp2 | | swp3 | | wlan0 | +------------+ +------------+ +------------+ +------------+ +------------+ | ^ ^ | | | | | | | Client A Client B | | | +------------+ +------------+ +------------+ +------------+ +------------+ | swp0 | | swp1 | | swp2 | | swp3 | | wlan0 | +------------+ +------------+ +------------+ +------------+ +------------+ +------------------------------------------------------------------------+ | br0 | +------------------------------------------------------------------------+ AP 2 - br0 of AP 1 will know that Clients A and B are reachable via wlan0 - the hardware fdb of a DSA switch driver today is not kept in sync with the software entries on other bridge ports, so it will not know that clients A and B are reachable via the CPU port UNLESS the hardware switch itself performs SA learning from traffic injected from the CPU. Nonetheless, a substantial number of switches don't. - the hardware fdb of the DSA switch on AP 2 may autonomously learn that Client A and B are reachable through swp0. Therefore, the software br0 of AP 2 also may or may not learn this. In the example we're illustrating, some Ethernet traffic has been going on, and br0 from AP 2 has indeed learnt that it can reach Client B through swp0. One of the wireless clients, say Client B, disconnects from AP 1 and roams to AP 2. The topology now looks like this: AP 1: +------------------------------------------------------------------------+ | br0 | +------------------------------------------------------------------------+ +------------+ +------------+ +------------+ +------------+ +------------+ | swp0 | | swp1 | | swp2 | | swp3 | | wlan0 | +------------+ +------------+ +------------+ +------------+ +------------+ | ^ | | | Client A | | | Client B | | | v +------------+ +------------+ +------------+ +------------+ +------------+ | swp0 | | swp1 | | swp2 | | swp3 | | wlan0 | +------------+ +------------+ +------------+ +------------+ +------------+ +------------------------------------------------------------------------+ | br0 | +------------------------------------------------------------------------+ AP 2 - br0 of AP 1 still knows that Client A is reachable via wlan0 (no change) - br0 of AP 1 will (possibly) know that Client B has left wlan0. There are cases where it might never find out though. Either way, DSA today does not process that notification in any way. - the hardware FDB of the DSA switch on AP 1 may learn autonomously that Client B can be reached via swp0, if it receives any packet with Client 1's source MAC address over Ethernet. - the hardware FDB of the DSA switch on AP 2 still thinks that Client B can be reached via swp0. It does not know that it has roamed to wlan0, because it doesn't perform SA learning from the CPU port. Now Client A contacts Client B. AP 1 routes the packet fine towards swp0 and delivers it on the Ethernet segment. AP 2 sees a frame on swp0 and its fdb says that the destination is swp0. Hairpinning is disabled => drop. This problem comes from the fact that these switches have a 'blind spot' for addresses coming from software bridging. The generic solution is not to assume that hardware learning can be enabled somehow, but to listen to more bridge learning events. It turns out that the bridge driver does learn in software from all inbound frames, in __br_handle_local_finish. A proper SWITCHDEV_FDB_ADD_TO_DEVICE notification is emitted for the addresses serviced by the bridge on 'foreign' interfaces. The software bridge also does the right thing on migration, by notifying that the old entry is deleted, so that does not need to be special-cased in DSA. When it is deleted, we just need to delete our static FDB entry towards the CPU too, and wait. The problem is that DSA currently only cares about SWITCHDEV_FDB_ADD_TO_DEVICE events received on its own interfaces, such as static FDB entries. Luckily we can change that, and DSA can listen to all switchdev FDB add/del events in the system and figure out if those events were emitted by a bridge that spans at least one of DSA's own ports. In case that is true, DSA will also offload that address towards its own CPU port, in the eventuality that there might be bridge clients attached to the DSA switch who want to talk to the station connected to the foreign interface. In terms of implementation, we need to keep the fdb_info->added_by_user check for the case where the switchdev event was targeted directly at a DSA switch port. But we don't need to look at that flag for snooped events. So the check is currently too late, we need to move it earlier. This also simplifies the code a bit, since we avoid uselessly allocating and freeing switchdev_work. We could probably do some improvements in the future. For example, multi-bridge support is rudimentary at the moment. If there are two bridges spanning a DSA switch's ports, and both of them need to service the same MAC address, then what will happen is that the migration of one of those stations will trigger the deletion of the FDB entry from the CPU port while it is still used by other bridge. That could be improved with reference counting but is left for another time. This behavior needs to be enabled at driver level by setting ds->assisted_learning_on_cpu_port = true. This is because we don't want to inflict a potential performance penalty (accesses through MDIO/I2C/SPI are expensive) to hardware that really doesn't need it because address learning on the CPU port works there. Reported-by: DENG Qingfang <dqfext@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-06 09:51:35 +00:00
net: dsa: use switchdev_handle_fdb_{add,del}_to_device Using the new fan-out helper for FDB entries installed on the software bridge, we can install host addresses with the proper refcount on the CPU port, such that this case: ip link set swp0 master br0 ip link set swp1 master br0 ip link set swp2 master br0 ip link set swp3 master br0 ip link set br0 address 00:01:02:03:04:05 ip link set swp3 nomaster works properly and the br0 address remains installed as a host entry with refcount 3 instead of getting deleted. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-19 13:51:40 +00:00
ether_addr_copy(switchdev_work->addr, fdb_info->addr);
switchdev_work->vid = fdb_info->vid;
switchdev_work->host_addr = host_addr;
dsa_schedule_work(&switchdev_work->work);
return 0;
}
net: dsa: Add support for learning FDB through notification Add support for learning FDB through notification. The driver defers the hardware update via ordered work queue. In case of a successful FDB add a notification is sent back to bridge. In case of hw FDB del failure the static FDB will be deleted from the bridge, thus, the interface is moved to down state in order to indicate inconsistent situation. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06 13:15:42 +00:00
/* Called under rcu_read_lock() */
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_switchdev_event(struct notifier_block *unused,
unsigned long event, void *ptr)
net: dsa: Add support for learning FDB through notification Add support for learning FDB through notification. The driver defers the hardware update via ordered work queue. In case of a successful FDB add a notification is sent back to bridge. In case of hw FDB del failure the static FDB will be deleted from the bridge, thus, the interface is moved to down state in order to indicate inconsistent situation. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06 13:15:42 +00:00
{
struct net_device *dev = switchdev_notifier_info_to_dev(ptr);
net: dsa: use switchdev handle helpers Get rid of the dsa_slave_switchdev_port_{attr_set,obj}_event functions in favor of the switchdev_handle_port_{attr_set,obj_add,obj_del} helpers which recurse into the lower devices of the target interface. This has the benefit of being aware of the operations made on the bridge device itself, where orig_dev is the bridge, and dev is the slave. This can be used later to configure the hardware switches. Only VLAN and (port) MDB objects not directly targeting the slave device are unsupported at the moment, so skip this case in their respective case statements. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14 17:49:22 +00:00
int err;
net: dsa: move switchdev event implementation under the same switch/case statement We'll need to start listening to SWITCHDEV_FDB_{ADD,DEL}_TO_DEVICE events even for interfaces where dsa_slave_dev_check returns false, so we need that check inside the switch-case statement for SWITCHDEV_FDB_*. This movement also avoids a useless allocation / free of switchdev_work on the untreated "default event" case. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-06 09:51:33 +00:00
switch (event) {
case SWITCHDEV_PORT_ATTR_SET:
net: dsa: use switchdev handle helpers Get rid of the dsa_slave_switchdev_port_{attr_set,obj}_event functions in favor of the switchdev_handle_port_{attr_set,obj_add,obj_del} helpers which recurse into the lower devices of the target interface. This has the benefit of being aware of the operations made on the bridge device itself, where orig_dev is the bridge, and dev is the slave. This can be used later to configure the hardware switches. Only VLAN and (port) MDB objects not directly targeting the slave device are unsupported at the moment, so skip this case in their respective case statements. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14 17:49:22 +00:00
err = switchdev_handle_port_attr_set(dev, ptr,
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dsa_user_dev_check,
dsa_user_port_attr_set);
net: dsa: use switchdev handle helpers Get rid of the dsa_slave_switchdev_port_{attr_set,obj}_event functions in favor of the switchdev_handle_port_{attr_set,obj_add,obj_del} helpers which recurse into the lower devices of the target interface. This has the benefit of being aware of the operations made on the bridge device itself, where orig_dev is the bridge, and dev is the slave. This can be used later to configure the hardware switches. Only VLAN and (port) MDB objects not directly targeting the slave device are unsupported at the moment, so skip this case in their respective case statements. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14 17:49:22 +00:00
return notifier_from_errno(err);
net: dsa: move switchdev event implementation under the same switch/case statement We'll need to start listening to SWITCHDEV_FDB_{ADD,DEL}_TO_DEVICE events even for interfaces where dsa_slave_dev_check returns false, so we need that check inside the switch-case statement for SWITCHDEV_FDB_*. This movement also avoids a useless allocation / free of switchdev_work on the untreated "default event" case. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-06 09:51:33 +00:00
case SWITCHDEV_FDB_ADD_TO_DEVICE:
case SWITCHDEV_FDB_DEL_TO_DEVICE:
net: switchdev: merge switchdev_handle_fdb_{add,del}_to_device To reduce code churn, the same patch makes multiple changes, since they all touch the same lines: 1. The implementations for these two are identical, just with different function pointers. Reduce duplications and name the function pointers "mod_cb" instead of "add_cb" and "del_cb". Pass the event as argument. 2. Drop the "const" attribute from "orig_dev". If the driver needs to check whether orig_dev belongs to itself and then call_switchdev_notifiers(orig_dev, SWITCHDEV_FDB_OFFLOADED), it can't, because call_switchdev_notifiers takes a non-const struct net_device *. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-26 14:27:43 +00:00
err = switchdev_handle_fdb_event_to_device(dev, event, ptr,
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dsa_user_dev_check,
net: switchdev: merge switchdev_handle_fdb_{add,del}_to_device To reduce code churn, the same patch makes multiple changes, since they all touch the same lines: 1. The implementations for these two are identical, just with different function pointers. Reduce duplications and name the function pointers "mod_cb" instead of "add_cb" and "del_cb". Pass the event as argument. 2. Drop the "const" attribute from "orig_dev". If the driver needs to check whether orig_dev belongs to itself and then call_switchdev_notifiers(orig_dev, SWITCHDEV_FDB_OFFLOADED), it can't, because call_switchdev_notifiers takes a non-const struct net_device *. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-26 14:27:43 +00:00
dsa_foreign_dev_check,
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dsa_user_fdb_event);
net: dsa: use switchdev_handle_fdb_{add,del}_to_device Using the new fan-out helper for FDB entries installed on the software bridge, we can install host addresses with the proper refcount on the CPU port, such that this case: ip link set swp0 master br0 ip link set swp1 master br0 ip link set swp2 master br0 ip link set swp3 master br0 ip link set br0 address 00:01:02:03:04:05 ip link set swp3 nomaster works properly and the br0 address remains installed as a host entry with refcount 3 instead of getting deleted. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-19 13:51:40 +00:00
return notifier_from_errno(err);
net: dsa: Add support for learning FDB through notification Add support for learning FDB through notification. The driver defers the hardware update via ordered work queue. In case of a successful FDB add a notification is sent back to bridge. In case of hw FDB del failure the static FDB will be deleted from the bridge, thus, the interface is moved to down state in order to indicate inconsistent situation. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06 13:15:42 +00:00
default:
return NOTIFY_DONE;
}
return NOTIFY_OK;
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static int dsa_user_switchdev_blocking_event(struct notifier_block *unused,
unsigned long event, void *ptr)
net: dsa: slave: Handle SWITCHDEV_PORT_OBJ_ADD/_DEL Following patches will change the way of distributing port object changes from a switchdev operation to a switchdev notifier. The switchdev code currently recursively descends through layers of lower devices, eventually calling the op on a front-panel port device. The notifier will instead be sent referencing the bridge port device, which may be a stacking device that's one of front-panel ports uppers, or a completely unrelated device. DSA currently doesn't support any other uppers than bridge. SWITCHDEV_OBJ_ID_HOST_MDB and _PORT_MDB objects are always notified on the bridge port device. Thus the only case that a stacked device could be validly referenced by port object notifications are bridge notifications for VLAN objects added to the bridge itself. But the driver explicitly rejects such notifications in dsa_port_vlan_add(). It is therefore safe to assume that the only interesting case is that the notification is on a front-panel port netdevice. Therefore keep the filtering by dsa_slave_dev_check() in place. To handle SWITCHDEV_PORT_OBJ_ADD and _DEL, subscribe to the blocking notifier chain. Dispatch to rocker_port_obj_add() resp. _del() to maintain the behavior that the switchdev operation based code currently has. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-22 23:29:05 +00:00
{
struct net_device *dev = switchdev_notifier_info_to_dev(ptr);
net: dsa: use switchdev handle helpers Get rid of the dsa_slave_switchdev_port_{attr_set,obj}_event functions in favor of the switchdev_handle_port_{attr_set,obj_add,obj_del} helpers which recurse into the lower devices of the target interface. This has the benefit of being aware of the operations made on the bridge device itself, where orig_dev is the bridge, and dev is the slave. This can be used later to configure the hardware switches. Only VLAN and (port) MDB objects not directly targeting the slave device are unsupported at the moment, so skip this case in their respective case statements. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14 17:49:22 +00:00
int err;
net: dsa: slave: Handle SWITCHDEV_PORT_OBJ_ADD/_DEL Following patches will change the way of distributing port object changes from a switchdev operation to a switchdev notifier. The switchdev code currently recursively descends through layers of lower devices, eventually calling the op on a front-panel port device. The notifier will instead be sent referencing the bridge port device, which may be a stacking device that's one of front-panel ports uppers, or a completely unrelated device. DSA currently doesn't support any other uppers than bridge. SWITCHDEV_OBJ_ID_HOST_MDB and _PORT_MDB objects are always notified on the bridge port device. Thus the only case that a stacked device could be validly referenced by port object notifications are bridge notifications for VLAN objects added to the bridge itself. But the driver explicitly rejects such notifications in dsa_port_vlan_add(). It is therefore safe to assume that the only interesting case is that the notification is on a front-panel port netdevice. Therefore keep the filtering by dsa_slave_dev_check() in place. To handle SWITCHDEV_PORT_OBJ_ADD and _DEL, subscribe to the blocking notifier chain. Dispatch to rocker_port_obj_add() resp. _del() to maintain the behavior that the switchdev operation based code currently has. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-22 23:29:05 +00:00
switch (event) {
net: dsa: use switchdev handle helpers Get rid of the dsa_slave_switchdev_port_{attr_set,obj}_event functions in favor of the switchdev_handle_port_{attr_set,obj_add,obj_del} helpers which recurse into the lower devices of the target interface. This has the benefit of being aware of the operations made on the bridge device itself, where orig_dev is the bridge, and dev is the slave. This can be used later to configure the hardware switches. Only VLAN and (port) MDB objects not directly targeting the slave device are unsupported at the moment, so skip this case in their respective case statements. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14 17:49:22 +00:00
case SWITCHDEV_PORT_OBJ_ADD:
net: dsa: offload bridge port VLANs on foreign interfaces DSA now explicitly handles VLANs installed with the 'self' flag on the bridge as host VLANs, instead of just replicating every bridge port VLAN also on the CPU port and never deleting it, which is what it did before. However, this leaves a corner case uncovered, as explained by Tobias Waldekranz: https://patchwork.kernel.org/project/netdevbpf/patch/20220209213044.2353153-6-vladimir.oltean@nxp.com/#24735260 Forwarding towards a bridge port VLAN installed on a bridge port foreign to DSA (separate NIC, Wi-Fi AP) used to work by virtue of the fact that DSA itself needed to have at least one port in that VLAN (therefore, it also had the CPU port in said VLAN). However, now that the CPU port may not be member of all VLANs that user ports are members of, we need to ensure this isn't the case if software forwarding to a foreign interface is required. The solution is to treat bridge port VLANs on standalone interfaces in the exact same way as host VLANs. From DSA's perspective, there is no difference between local termination and software forwarding; packets in that VLAN must reach the CPU in both cases. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-15 17:02:18 +00:00
err = switchdev_handle_port_obj_add_foreign(dev, ptr,
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dsa_user_dev_check,
net: dsa: offload bridge port VLANs on foreign interfaces DSA now explicitly handles VLANs installed with the 'self' flag on the bridge as host VLANs, instead of just replicating every bridge port VLAN also on the CPU port and never deleting it, which is what it did before. However, this leaves a corner case uncovered, as explained by Tobias Waldekranz: https://patchwork.kernel.org/project/netdevbpf/patch/20220209213044.2353153-6-vladimir.oltean@nxp.com/#24735260 Forwarding towards a bridge port VLAN installed on a bridge port foreign to DSA (separate NIC, Wi-Fi AP) used to work by virtue of the fact that DSA itself needed to have at least one port in that VLAN (therefore, it also had the CPU port in said VLAN). However, now that the CPU port may not be member of all VLANs that user ports are members of, we need to ensure this isn't the case if software forwarding to a foreign interface is required. The solution is to treat bridge port VLANs on standalone interfaces in the exact same way as host VLANs. From DSA's perspective, there is no difference between local termination and software forwarding; packets in that VLAN must reach the CPU in both cases. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-15 17:02:18 +00:00
dsa_foreign_dev_check,
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dsa_user_port_obj_add);
net: dsa: use switchdev handle helpers Get rid of the dsa_slave_switchdev_port_{attr_set,obj}_event functions in favor of the switchdev_handle_port_{attr_set,obj_add,obj_del} helpers which recurse into the lower devices of the target interface. This has the benefit of being aware of the operations made on the bridge device itself, where orig_dev is the bridge, and dev is the slave. This can be used later to configure the hardware switches. Only VLAN and (port) MDB objects not directly targeting the slave device are unsupported at the moment, so skip this case in their respective case statements. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14 17:49:22 +00:00
return notifier_from_errno(err);
net: dsa: slave: Handle SWITCHDEV_PORT_OBJ_ADD/_DEL Following patches will change the way of distributing port object changes from a switchdev operation to a switchdev notifier. The switchdev code currently recursively descends through layers of lower devices, eventually calling the op on a front-panel port device. The notifier will instead be sent referencing the bridge port device, which may be a stacking device that's one of front-panel ports uppers, or a completely unrelated device. DSA currently doesn't support any other uppers than bridge. SWITCHDEV_OBJ_ID_HOST_MDB and _PORT_MDB objects are always notified on the bridge port device. Thus the only case that a stacked device could be validly referenced by port object notifications are bridge notifications for VLAN objects added to the bridge itself. But the driver explicitly rejects such notifications in dsa_port_vlan_add(). It is therefore safe to assume that the only interesting case is that the notification is on a front-panel port netdevice. Therefore keep the filtering by dsa_slave_dev_check() in place. To handle SWITCHDEV_PORT_OBJ_ADD and _DEL, subscribe to the blocking notifier chain. Dispatch to rocker_port_obj_add() resp. _del() to maintain the behavior that the switchdev operation based code currently has. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-22 23:29:05 +00:00
case SWITCHDEV_PORT_OBJ_DEL:
net: dsa: offload bridge port VLANs on foreign interfaces DSA now explicitly handles VLANs installed with the 'self' flag on the bridge as host VLANs, instead of just replicating every bridge port VLAN also on the CPU port and never deleting it, which is what it did before. However, this leaves a corner case uncovered, as explained by Tobias Waldekranz: https://patchwork.kernel.org/project/netdevbpf/patch/20220209213044.2353153-6-vladimir.oltean@nxp.com/#24735260 Forwarding towards a bridge port VLAN installed on a bridge port foreign to DSA (separate NIC, Wi-Fi AP) used to work by virtue of the fact that DSA itself needed to have at least one port in that VLAN (therefore, it also had the CPU port in said VLAN). However, now that the CPU port may not be member of all VLANs that user ports are members of, we need to ensure this isn't the case if software forwarding to a foreign interface is required. The solution is to treat bridge port VLANs on standalone interfaces in the exact same way as host VLANs. From DSA's perspective, there is no difference between local termination and software forwarding; packets in that VLAN must reach the CPU in both cases. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-15 17:02:18 +00:00
err = switchdev_handle_port_obj_del_foreign(dev, ptr,
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dsa_user_dev_check,
net: dsa: offload bridge port VLANs on foreign interfaces DSA now explicitly handles VLANs installed with the 'self' flag on the bridge as host VLANs, instead of just replicating every bridge port VLAN also on the CPU port and never deleting it, which is what it did before. However, this leaves a corner case uncovered, as explained by Tobias Waldekranz: https://patchwork.kernel.org/project/netdevbpf/patch/20220209213044.2353153-6-vladimir.oltean@nxp.com/#24735260 Forwarding towards a bridge port VLAN installed on a bridge port foreign to DSA (separate NIC, Wi-Fi AP) used to work by virtue of the fact that DSA itself needed to have at least one port in that VLAN (therefore, it also had the CPU port in said VLAN). However, now that the CPU port may not be member of all VLANs that user ports are members of, we need to ensure this isn't the case if software forwarding to a foreign interface is required. The solution is to treat bridge port VLANs on standalone interfaces in the exact same way as host VLANs. From DSA's perspective, there is no difference between local termination and software forwarding; packets in that VLAN must reach the CPU in both cases. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-15 17:02:18 +00:00
dsa_foreign_dev_check,
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dsa_user_port_obj_del);
net: dsa: use switchdev handle helpers Get rid of the dsa_slave_switchdev_port_{attr_set,obj}_event functions in favor of the switchdev_handle_port_{attr_set,obj_add,obj_del} helpers which recurse into the lower devices of the target interface. This has the benefit of being aware of the operations made on the bridge device itself, where orig_dev is the bridge, and dev is the slave. This can be used later to configure the hardware switches. Only VLAN and (port) MDB objects not directly targeting the slave device are unsupported at the moment, so skip this case in their respective case statements. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14 17:49:22 +00:00
return notifier_from_errno(err);
net: dsa: Handle SWITCHDEV_PORT_ATTR_SET Following patches will change the way we communicate setting a port's attribute and use notifiers towards that goal. Prepare DSA to support receiving notifier events targeting SWITCHDEV_PORT_ATTR_SET from both atomic and process context and use a small helper to translate the event notifier into something that dsa_slave_port_attr_set() can process. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-27 19:44:27 +00:00
case SWITCHDEV_PORT_ATTR_SET:
net: dsa: use switchdev handle helpers Get rid of the dsa_slave_switchdev_port_{attr_set,obj}_event functions in favor of the switchdev_handle_port_{attr_set,obj_add,obj_del} helpers which recurse into the lower devices of the target interface. This has the benefit of being aware of the operations made on the bridge device itself, where orig_dev is the bridge, and dev is the slave. This can be used later to configure the hardware switches. Only VLAN and (port) MDB objects not directly targeting the slave device are unsupported at the moment, so skip this case in their respective case statements. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14 17:49:22 +00:00
err = switchdev_handle_port_attr_set(dev, ptr,
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
dsa_user_dev_check,
dsa_user_port_attr_set);
net: dsa: use switchdev handle helpers Get rid of the dsa_slave_switchdev_port_{attr_set,obj}_event functions in favor of the switchdev_handle_port_{attr_set,obj_add,obj_del} helpers which recurse into the lower devices of the target interface. This has the benefit of being aware of the operations made on the bridge device itself, where orig_dev is the bridge, and dev is the slave. This can be used later to configure the hardware switches. Only VLAN and (port) MDB objects not directly targeting the slave device are unsupported at the moment, so skip this case in their respective case statements. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14 17:49:22 +00:00
return notifier_from_errno(err);
net: dsa: slave: Handle SWITCHDEV_PORT_OBJ_ADD/_DEL Following patches will change the way of distributing port object changes from a switchdev operation to a switchdev notifier. The switchdev code currently recursively descends through layers of lower devices, eventually calling the op on a front-panel port device. The notifier will instead be sent referencing the bridge port device, which may be a stacking device that's one of front-panel ports uppers, or a completely unrelated device. DSA currently doesn't support any other uppers than bridge. SWITCHDEV_OBJ_ID_HOST_MDB and _PORT_MDB objects are always notified on the bridge port device. Thus the only case that a stacked device could be validly referenced by port object notifications are bridge notifications for VLAN objects added to the bridge itself. But the driver explicitly rejects such notifications in dsa_port_vlan_add(). It is therefore safe to assume that the only interesting case is that the notification is on a front-panel port netdevice. Therefore keep the filtering by dsa_slave_dev_check() in place. To handle SWITCHDEV_PORT_OBJ_ADD and _DEL, subscribe to the blocking notifier chain. Dispatch to rocker_port_obj_add() resp. _del() to maintain the behavior that the switchdev operation based code currently has. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-22 23:29:05 +00:00
}
return NOTIFY_DONE;
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
static struct notifier_block dsa_user_nb __read_mostly = {
.notifier_call = dsa_user_netdevice_event,
net: dsa: Add support for learning FDB through notification Add support for learning FDB through notification. The driver defers the hardware update via ordered work queue. In case of a successful FDB add a notification is sent back to bridge. In case of hw FDB del failure the static FDB will be deleted from the bridge, thus, the interface is moved to down state in order to indicate inconsistent situation. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06 13:15:42 +00:00
};
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct notifier_block dsa_user_switchdev_notifier = {
.notifier_call = dsa_user_switchdev_event,
net: dsa: move netdevice notifier registration Move the netdevice notifier block register code in slave.c and provide helpers for dsa.c to register and unregister it. At the same time, check for errors since (un)register_netdevice_notifier may fail. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03 18:20:16 +00:00
};
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
struct notifier_block dsa_user_switchdev_blocking_notifier = {
.notifier_call = dsa_user_switchdev_blocking_event,
net: dsa: slave: Handle SWITCHDEV_PORT_OBJ_ADD/_DEL Following patches will change the way of distributing port object changes from a switchdev operation to a switchdev notifier. The switchdev code currently recursively descends through layers of lower devices, eventually calling the op on a front-panel port device. The notifier will instead be sent referencing the bridge port device, which may be a stacking device that's one of front-panel ports uppers, or a completely unrelated device. DSA currently doesn't support any other uppers than bridge. SWITCHDEV_OBJ_ID_HOST_MDB and _PORT_MDB objects are always notified on the bridge port device. Thus the only case that a stacked device could be validly referenced by port object notifications are bridge notifications for VLAN objects added to the bridge itself. But the driver explicitly rejects such notifications in dsa_port_vlan_add(). It is therefore safe to assume that the only interesting case is that the notification is on a front-panel port netdevice. Therefore keep the filtering by dsa_slave_dev_check() in place. To handle SWITCHDEV_PORT_OBJ_ADD and _DEL, subscribe to the blocking notifier chain. Dispatch to rocker_port_obj_add() resp. _del() to maintain the behavior that the switchdev operation based code currently has. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-22 23:29:05 +00:00
};
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
int dsa_user_register_notifier(void)
net: dsa: move netdevice notifier registration Move the netdevice notifier block register code in slave.c and provide helpers for dsa.c to register and unregister it. At the same time, check for errors since (un)register_netdevice_notifier may fail. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03 18:20:16 +00:00
{
net: dsa: slave: Handle SWITCHDEV_PORT_OBJ_ADD/_DEL Following patches will change the way of distributing port object changes from a switchdev operation to a switchdev notifier. The switchdev code currently recursively descends through layers of lower devices, eventually calling the op on a front-panel port device. The notifier will instead be sent referencing the bridge port device, which may be a stacking device that's one of front-panel ports uppers, or a completely unrelated device. DSA currently doesn't support any other uppers than bridge. SWITCHDEV_OBJ_ID_HOST_MDB and _PORT_MDB objects are always notified on the bridge port device. Thus the only case that a stacked device could be validly referenced by port object notifications are bridge notifications for VLAN objects added to the bridge itself. But the driver explicitly rejects such notifications in dsa_port_vlan_add(). It is therefore safe to assume that the only interesting case is that the notification is on a front-panel port netdevice. Therefore keep the filtering by dsa_slave_dev_check() in place. To handle SWITCHDEV_PORT_OBJ_ADD and _DEL, subscribe to the blocking notifier chain. Dispatch to rocker_port_obj_add() resp. _del() to maintain the behavior that the switchdev operation based code currently has. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-22 23:29:05 +00:00
struct notifier_block *nb;
net: dsa: Add support for learning FDB through notification Add support for learning FDB through notification. The driver defers the hardware update via ordered work queue. In case of a successful FDB add a notification is sent back to bridge. In case of hw FDB del failure the static FDB will be deleted from the bridge, thus, the interface is moved to down state in order to indicate inconsistent situation. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06 13:15:42 +00:00
int err;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
err = register_netdevice_notifier(&dsa_user_nb);
net: dsa: Add support for learning FDB through notification Add support for learning FDB through notification. The driver defers the hardware update via ordered work queue. In case of a successful FDB add a notification is sent back to bridge. In case of hw FDB del failure the static FDB will be deleted from the bridge, thus, the interface is moved to down state in order to indicate inconsistent situation. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06 13:15:42 +00:00
if (err)
return err;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
err = register_switchdev_notifier(&dsa_user_switchdev_notifier);
net: dsa: Add support for learning FDB through notification Add support for learning FDB through notification. The driver defers the hardware update via ordered work queue. In case of a successful FDB add a notification is sent back to bridge. In case of hw FDB del failure the static FDB will be deleted from the bridge, thus, the interface is moved to down state in order to indicate inconsistent situation. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06 13:15:42 +00:00
if (err)
goto err_switchdev_nb;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
nb = &dsa_user_switchdev_blocking_notifier;
net: dsa: slave: Handle SWITCHDEV_PORT_OBJ_ADD/_DEL Following patches will change the way of distributing port object changes from a switchdev operation to a switchdev notifier. The switchdev code currently recursively descends through layers of lower devices, eventually calling the op on a front-panel port device. The notifier will instead be sent referencing the bridge port device, which may be a stacking device that's one of front-panel ports uppers, or a completely unrelated device. DSA currently doesn't support any other uppers than bridge. SWITCHDEV_OBJ_ID_HOST_MDB and _PORT_MDB objects are always notified on the bridge port device. Thus the only case that a stacked device could be validly referenced by port object notifications are bridge notifications for VLAN objects added to the bridge itself. But the driver explicitly rejects such notifications in dsa_port_vlan_add(). It is therefore safe to assume that the only interesting case is that the notification is on a front-panel port netdevice. Therefore keep the filtering by dsa_slave_dev_check() in place. To handle SWITCHDEV_PORT_OBJ_ADD and _DEL, subscribe to the blocking notifier chain. Dispatch to rocker_port_obj_add() resp. _del() to maintain the behavior that the switchdev operation based code currently has. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-22 23:29:05 +00:00
err = register_switchdev_blocking_notifier(nb);
if (err)
goto err_switchdev_blocking_nb;
net: dsa: Add support for learning FDB through notification Add support for learning FDB through notification. The driver defers the hardware update via ordered work queue. In case of a successful FDB add a notification is sent back to bridge. In case of hw FDB del failure the static FDB will be deleted from the bridge, thus, the interface is moved to down state in order to indicate inconsistent situation. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06 13:15:42 +00:00
return 0;
net: dsa: slave: Handle SWITCHDEV_PORT_OBJ_ADD/_DEL Following patches will change the way of distributing port object changes from a switchdev operation to a switchdev notifier. The switchdev code currently recursively descends through layers of lower devices, eventually calling the op on a front-panel port device. The notifier will instead be sent referencing the bridge port device, which may be a stacking device that's one of front-panel ports uppers, or a completely unrelated device. DSA currently doesn't support any other uppers than bridge. SWITCHDEV_OBJ_ID_HOST_MDB and _PORT_MDB objects are always notified on the bridge port device. Thus the only case that a stacked device could be validly referenced by port object notifications are bridge notifications for VLAN objects added to the bridge itself. But the driver explicitly rejects such notifications in dsa_port_vlan_add(). It is therefore safe to assume that the only interesting case is that the notification is on a front-panel port netdevice. Therefore keep the filtering by dsa_slave_dev_check() in place. To handle SWITCHDEV_PORT_OBJ_ADD and _DEL, subscribe to the blocking notifier chain. Dispatch to rocker_port_obj_add() resp. _del() to maintain the behavior that the switchdev operation based code currently has. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-22 23:29:05 +00:00
err_switchdev_blocking_nb:
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
unregister_switchdev_notifier(&dsa_user_switchdev_notifier);
net: dsa: Add support for learning FDB through notification Add support for learning FDB through notification. The driver defers the hardware update via ordered work queue. In case of a successful FDB add a notification is sent back to bridge. In case of hw FDB del failure the static FDB will be deleted from the bridge, thus, the interface is moved to down state in order to indicate inconsistent situation. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06 13:15:42 +00:00
err_switchdev_nb:
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
unregister_netdevice_notifier(&dsa_user_nb);
net: dsa: Add support for learning FDB through notification Add support for learning FDB through notification. The driver defers the hardware update via ordered work queue. In case of a successful FDB add a notification is sent back to bridge. In case of hw FDB del failure the static FDB will be deleted from the bridge, thus, the interface is moved to down state in order to indicate inconsistent situation. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06 13:15:42 +00:00
return err;
net: dsa: move netdevice notifier registration Move the netdevice notifier block register code in slave.c and provide helpers for dsa.c to register and unregister it. At the same time, check for errors since (un)register_netdevice_notifier may fail. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03 18:20:16 +00:00
}
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
void dsa_user_unregister_notifier(void)
net: dsa: move netdevice notifier registration Move the netdevice notifier block register code in slave.c and provide helpers for dsa.c to register and unregister it. At the same time, check for errors since (un)register_netdevice_notifier may fail. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03 18:20:16 +00:00
{
net: dsa: slave: Handle SWITCHDEV_PORT_OBJ_ADD/_DEL Following patches will change the way of distributing port object changes from a switchdev operation to a switchdev notifier. The switchdev code currently recursively descends through layers of lower devices, eventually calling the op on a front-panel port device. The notifier will instead be sent referencing the bridge port device, which may be a stacking device that's one of front-panel ports uppers, or a completely unrelated device. DSA currently doesn't support any other uppers than bridge. SWITCHDEV_OBJ_ID_HOST_MDB and _PORT_MDB objects are always notified on the bridge port device. Thus the only case that a stacked device could be validly referenced by port object notifications are bridge notifications for VLAN objects added to the bridge itself. But the driver explicitly rejects such notifications in dsa_port_vlan_add(). It is therefore safe to assume that the only interesting case is that the notification is on a front-panel port netdevice. Therefore keep the filtering by dsa_slave_dev_check() in place. To handle SWITCHDEV_PORT_OBJ_ADD and _DEL, subscribe to the blocking notifier chain. Dispatch to rocker_port_obj_add() resp. _del() to maintain the behavior that the switchdev operation based code currently has. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-22 23:29:05 +00:00
struct notifier_block *nb;
net: dsa: move netdevice notifier registration Move the netdevice notifier block register code in slave.c and provide helpers for dsa.c to register and unregister it. At the same time, check for errors since (un)register_netdevice_notifier may fail. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03 18:20:16 +00:00
int err;
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
nb = &dsa_user_switchdev_blocking_notifier;
net: dsa: slave: Handle SWITCHDEV_PORT_OBJ_ADD/_DEL Following patches will change the way of distributing port object changes from a switchdev operation to a switchdev notifier. The switchdev code currently recursively descends through layers of lower devices, eventually calling the op on a front-panel port device. The notifier will instead be sent referencing the bridge port device, which may be a stacking device that's one of front-panel ports uppers, or a completely unrelated device. DSA currently doesn't support any other uppers than bridge. SWITCHDEV_OBJ_ID_HOST_MDB and _PORT_MDB objects are always notified on the bridge port device. Thus the only case that a stacked device could be validly referenced by port object notifications are bridge notifications for VLAN objects added to the bridge itself. But the driver explicitly rejects such notifications in dsa_port_vlan_add(). It is therefore safe to assume that the only interesting case is that the notification is on a front-panel port netdevice. Therefore keep the filtering by dsa_slave_dev_check() in place. To handle SWITCHDEV_PORT_OBJ_ADD and _DEL, subscribe to the blocking notifier chain. Dispatch to rocker_port_obj_add() resp. _del() to maintain the behavior that the switchdev operation based code currently has. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-22 23:29:05 +00:00
err = unregister_switchdev_blocking_notifier(nb);
if (err)
pr_err("DSA: failed to unregister switchdev blocking notifier (%d)\n", err);
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
err = unregister_switchdev_notifier(&dsa_user_switchdev_notifier);
net: dsa: Add support for learning FDB through notification Add support for learning FDB through notification. The driver defers the hardware update via ordered work queue. In case of a successful FDB add a notification is sent back to bridge. In case of hw FDB del failure the static FDB will be deleted from the bridge, thus, the interface is moved to down state in order to indicate inconsistent situation. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06 13:15:42 +00:00
if (err)
pr_err("DSA: failed to unregister switchdev notifier (%d)\n", err);
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
err = unregister_netdevice_notifier(&dsa_user_nb);
net: dsa: move netdevice notifier registration Move the netdevice notifier block register code in slave.c and provide helpers for dsa.c to register and unregister it. At the same time, check for errors since (un)register_netdevice_notifier may fail. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03 18:20:16 +00:00
if (err)
net: dsa: Use conduit and user terms Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23 18:17:28 +00:00
pr_err("DSA: failed to unregister user notifier (%d)\n", err);
net: dsa: move netdevice notifier registration Move the netdevice notifier block register code in slave.c and provide helpers for dsa.c to register and unregister it. At the same time, check for errors since (un)register_netdevice_notifier may fail. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03 18:20:16 +00:00
}
Reference in New Issue Copy Permalink