linux/drivers/net/wireless/b43legacy/main.c

4064 lines
109 KiB
C
Raw Normal View History

/*
*
* Broadcom B43legacy wireless driver
*
* Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>
* Copyright (c) 2005-2008 Stefano Brivio <stefano.brivio@polimi.it>
* Copyright (c) 2005, 2006 Michael Buesch <m@bues.ch>
* Copyright (c) 2005 Danny van Dyk <kugelfang@gentoo.org>
* Copyright (c) 2005 Andreas Jaggi <andreas.jaggi@waterwave.ch>
* Copyright (c) 2007 Larry Finger <Larry.Finger@lwfinger.net>
*
* Some parts of the code in this file are derived from the ipw2200
* driver Copyright(c) 2003 - 2004 Intel Corporation.
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING. If not, write to
* the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
* Boston, MA 02110-1301, USA.
*
*/
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/if_arp.h>
#include <linux/etherdevice.h>
#include <linux/firmware.h>
#include <linux/workqueue.h>
#include <linux/sched.h>
#include <linux/skbuff.h>
#include <linux/dma-mapping.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
#include <net/dst.h>
#include <asm/unaligned.h>
#include "b43legacy.h"
#include "main.h"
#include "debugfs.h"
#include "phy.h"
#include "dma.h"
#include "pio.h"
#include "sysfs.h"
#include "xmit.h"
#include "radio.h"
MODULE_DESCRIPTION("Broadcom B43legacy wireless driver");
MODULE_AUTHOR("Martin Langer");
MODULE_AUTHOR("Stefano Brivio");
MODULE_AUTHOR("Michael Buesch");
MODULE_LICENSE("GPL");
MODULE_FIRMWARE("b43legacy/ucode2.fw");
MODULE_FIRMWARE("b43legacy/ucode4.fw");
#if defined(CONFIG_B43LEGACY_DMA) && defined(CONFIG_B43LEGACY_PIO)
static int modparam_pio;
module_param_named(pio, modparam_pio, int, 0444);
MODULE_PARM_DESC(pio, "enable(1) / disable(0) PIO mode");
#elif defined(CONFIG_B43LEGACY_DMA)
# define modparam_pio 0
#elif defined(CONFIG_B43LEGACY_PIO)
# define modparam_pio 1
#endif
static int modparam_bad_frames_preempt;
module_param_named(bad_frames_preempt, modparam_bad_frames_preempt, int, 0444);
MODULE_PARM_DESC(bad_frames_preempt, "enable(1) / disable(0) Bad Frames"
" Preemption");
static char modparam_fwpostfix[16];
module_param_string(fwpostfix, modparam_fwpostfix, 16, 0444);
MODULE_PARM_DESC(fwpostfix, "Postfix for the firmware files to load.");
/* The following table supports BCM4301, BCM4303 and BCM4306/2 devices. */
static const struct ssb_device_id b43legacy_ssb_tbl[] = {
SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 2),
SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 4),
SSB_DEVTABLE_END
};
MODULE_DEVICE_TABLE(ssb, b43legacy_ssb_tbl);
/* Channel and ratetables are shared for all devices.
* They can't be const, because ieee80211 puts some precalculated
* data in there. This data is the same for all devices, so we don't
* get concurrency issues */
#define RATETAB_ENT(_rateid, _flags) \
{ \
.bitrate = B43legacy_RATE_TO_100KBPS(_rateid), \
.hw_value = (_rateid), \
.flags = (_flags), \
}
/*
* NOTE: When changing this, sync with xmit.c's
* b43legacy_plcp_get_bitrate_idx_* functions!
*/
static struct ieee80211_rate __b43legacy_ratetable[] = {
RATETAB_ENT(B43legacy_CCK_RATE_1MB, 0),
RATETAB_ENT(B43legacy_CCK_RATE_2MB, IEEE80211_RATE_SHORT_PREAMBLE),
RATETAB_ENT(B43legacy_CCK_RATE_5MB, IEEE80211_RATE_SHORT_PREAMBLE),
RATETAB_ENT(B43legacy_CCK_RATE_11MB, IEEE80211_RATE_SHORT_PREAMBLE),
RATETAB_ENT(B43legacy_OFDM_RATE_6MB, 0),
RATETAB_ENT(B43legacy_OFDM_RATE_9MB, 0),
RATETAB_ENT(B43legacy_OFDM_RATE_12MB, 0),
RATETAB_ENT(B43legacy_OFDM_RATE_18MB, 0),
RATETAB_ENT(B43legacy_OFDM_RATE_24MB, 0),
RATETAB_ENT(B43legacy_OFDM_RATE_36MB, 0),
RATETAB_ENT(B43legacy_OFDM_RATE_48MB, 0),
RATETAB_ENT(B43legacy_OFDM_RATE_54MB, 0),
};
#define b43legacy_b_ratetable (__b43legacy_ratetable + 0)
#define b43legacy_b_ratetable_size 4
#define b43legacy_g_ratetable (__b43legacy_ratetable + 0)
#define b43legacy_g_ratetable_size 12
#define CHANTAB_ENT(_chanid, _freq) \
{ \
.center_freq = (_freq), \
.hw_value = (_chanid), \
}
static struct ieee80211_channel b43legacy_bg_chantable[] = {
CHANTAB_ENT(1, 2412),
CHANTAB_ENT(2, 2417),
CHANTAB_ENT(3, 2422),
CHANTAB_ENT(4, 2427),
CHANTAB_ENT(5, 2432),
CHANTAB_ENT(6, 2437),
CHANTAB_ENT(7, 2442),
CHANTAB_ENT(8, 2447),
CHANTAB_ENT(9, 2452),
CHANTAB_ENT(10, 2457),
CHANTAB_ENT(11, 2462),
CHANTAB_ENT(12, 2467),
CHANTAB_ENT(13, 2472),
CHANTAB_ENT(14, 2484),
};
static struct ieee80211_supported_band b43legacy_band_2GHz_BPHY = {
.channels = b43legacy_bg_chantable,
.n_channels = ARRAY_SIZE(b43legacy_bg_chantable),
.bitrates = b43legacy_b_ratetable,
.n_bitrates = b43legacy_b_ratetable_size,
};
static struct ieee80211_supported_band b43legacy_band_2GHz_GPHY = {
.channels = b43legacy_bg_chantable,
.n_channels = ARRAY_SIZE(b43legacy_bg_chantable),
.bitrates = b43legacy_g_ratetable,
.n_bitrates = b43legacy_g_ratetable_size,
};
static void b43legacy_wireless_core_exit(struct b43legacy_wldev *dev);
static int b43legacy_wireless_core_init(struct b43legacy_wldev *dev);
static void b43legacy_wireless_core_stop(struct b43legacy_wldev *dev);
static int b43legacy_wireless_core_start(struct b43legacy_wldev *dev);
static int b43legacy_ratelimit(struct b43legacy_wl *wl)
{
if (!wl || !wl->current_dev)
return 1;
if (b43legacy_status(wl->current_dev) < B43legacy_STAT_STARTED)
return 1;
/* We are up and running.
* Ratelimit the messages to avoid DoS over the net. */
return net_ratelimit();
}
void b43legacyinfo(struct b43legacy_wl *wl, const char *fmt, ...)
{
struct va_format vaf;
va_list args;
if (!b43legacy_ratelimit(wl))
return;
va_start(args, fmt);
vaf.fmt = fmt;
vaf.va = &args;
printk(KERN_INFO "b43legacy-%s: %pV",
(wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan", &vaf);
va_end(args);
}
void b43legacyerr(struct b43legacy_wl *wl, const char *fmt, ...)
{
struct va_format vaf;
va_list args;
if (!b43legacy_ratelimit(wl))
return;
va_start(args, fmt);
vaf.fmt = fmt;
vaf.va = &args;
printk(KERN_ERR "b43legacy-%s ERROR: %pV",
(wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan", &vaf);
va_end(args);
}
void b43legacywarn(struct b43legacy_wl *wl, const char *fmt, ...)
{
struct va_format vaf;
va_list args;
if (!b43legacy_ratelimit(wl))
return;
va_start(args, fmt);
vaf.fmt = fmt;
vaf.va = &args;
printk(KERN_WARNING "b43legacy-%s warning: %pV",
(wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan", &vaf);
va_end(args);
}
#if B43legacy_DEBUG
void b43legacydbg(struct b43legacy_wl *wl, const char *fmt, ...)
{
struct va_format vaf;
va_list args;
va_start(args, fmt);
vaf.fmt = fmt;
vaf.va = &args;
printk(KERN_DEBUG "b43legacy-%s debug: %pV",
(wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan", &vaf);
va_end(args);
}
#endif /* DEBUG */
static void b43legacy_ram_write(struct b43legacy_wldev *dev, u16 offset,
u32 val)
{
u32 status;
B43legacy_WARN_ON(offset % 4 != 0);
status = b43legacy_read32(dev, B43legacy_MMIO_MACCTL);
if (status & B43legacy_MACCTL_BE)
val = swab32(val);
b43legacy_write32(dev, B43legacy_MMIO_RAM_CONTROL, offset);
mmiowb();
b43legacy_write32(dev, B43legacy_MMIO_RAM_DATA, val);
}
static inline
void b43legacy_shm_control_word(struct b43legacy_wldev *dev,
u16 routing, u16 offset)
{
u32 control;
/* "offset" is the WORD offset. */
control = routing;
control <<= 16;
control |= offset;
b43legacy_write32(dev, B43legacy_MMIO_SHM_CONTROL, control);
}
u32 b43legacy_shm_read32(struct b43legacy_wldev *dev,
u16 routing, u16 offset)
{
u32 ret;
if (routing == B43legacy_SHM_SHARED) {
B43legacy_WARN_ON((offset & 0x0001) != 0);
if (offset & 0x0003) {
/* Unaligned access */
b43legacy_shm_control_word(dev, routing, offset >> 2);
ret = b43legacy_read16(dev,
B43legacy_MMIO_SHM_DATA_UNALIGNED);
ret <<= 16;
b43legacy_shm_control_word(dev, routing,
(offset >> 2) + 1);
ret |= b43legacy_read16(dev, B43legacy_MMIO_SHM_DATA);
return ret;
}
offset >>= 2;
}
b43legacy_shm_control_word(dev, routing, offset);
ret = b43legacy_read32(dev, B43legacy_MMIO_SHM_DATA);
return ret;
}
u16 b43legacy_shm_read16(struct b43legacy_wldev *dev,
u16 routing, u16 offset)
{
u16 ret;
if (routing == B43legacy_SHM_SHARED) {
B43legacy_WARN_ON((offset & 0x0001) != 0);
if (offset & 0x0003) {
/* Unaligned access */
b43legacy_shm_control_word(dev, routing, offset >> 2);
ret = b43legacy_read16(dev,
B43legacy_MMIO_SHM_DATA_UNALIGNED);
return ret;
}
offset >>= 2;
}
b43legacy_shm_control_word(dev, routing, offset);
ret = b43legacy_read16(dev, B43legacy_MMIO_SHM_DATA);
return ret;
}
void b43legacy_shm_write32(struct b43legacy_wldev *dev,
u16 routing, u16 offset,
u32 value)
{
if (routing == B43legacy_SHM_SHARED) {
B43legacy_WARN_ON((offset & 0x0001) != 0);
if (offset & 0x0003) {
/* Unaligned access */
b43legacy_shm_control_word(dev, routing, offset >> 2);
mmiowb();
b43legacy_write16(dev,
B43legacy_MMIO_SHM_DATA_UNALIGNED,
(value >> 16) & 0xffff);
mmiowb();
b43legacy_shm_control_word(dev, routing,
(offset >> 2) + 1);
mmiowb();
b43legacy_write16(dev, B43legacy_MMIO_SHM_DATA,
value & 0xffff);
return;
}
offset >>= 2;
}
b43legacy_shm_control_word(dev, routing, offset);
mmiowb();
b43legacy_write32(dev, B43legacy_MMIO_SHM_DATA, value);
}
void b43legacy_shm_write16(struct b43legacy_wldev *dev, u16 routing, u16 offset,
u16 value)
{
if (routing == B43legacy_SHM_SHARED) {
B43legacy_WARN_ON((offset & 0x0001) != 0);
if (offset & 0x0003) {
/* Unaligned access */
b43legacy_shm_control_word(dev, routing, offset >> 2);
mmiowb();
b43legacy_write16(dev,
B43legacy_MMIO_SHM_DATA_UNALIGNED,
value);
return;
}
offset >>= 2;
}
b43legacy_shm_control_word(dev, routing, offset);
mmiowb();
b43legacy_write16(dev, B43legacy_MMIO_SHM_DATA, value);
}
/* Read HostFlags */
u32 b43legacy_hf_read(struct b43legacy_wldev *dev)
{
u32 ret;
ret = b43legacy_shm_read16(dev, B43legacy_SHM_SHARED,
B43legacy_SHM_SH_HOSTFHI);
ret <<= 16;
ret |= b43legacy_shm_read16(dev, B43legacy_SHM_SHARED,
B43legacy_SHM_SH_HOSTFLO);
return ret;
}
/* Write HostFlags */
void b43legacy_hf_write(struct b43legacy_wldev *dev, u32 value)
{
b43legacy_shm_write16(dev, B43legacy_SHM_SHARED,
B43legacy_SHM_SH_HOSTFLO,
(value & 0x0000FFFF));
b43legacy_shm_write16(dev, B43legacy_SHM_SHARED,
B43legacy_SHM_SH_HOSTFHI,
((value & 0xFFFF0000) >> 16));
}
void b43legacy_tsf_read(struct b43legacy_wldev *dev, u64 *tsf)
{
/* We need to be careful. As we read the TSF from multiple
* registers, we should take care of register overflows.
* In theory, the whole tsf read process should be atomic.
* We try to be atomic here, by restaring the read process,
* if any of the high registers changed (overflew).
*/
if (dev->dev->id.revision >= 3) {
u32 low;
u32 high;
u32 high2;
do {
high = b43legacy_read32(dev,
B43legacy_MMIO_REV3PLUS_TSF_HIGH);
low = b43legacy_read32(dev,
B43legacy_MMIO_REV3PLUS_TSF_LOW);
high2 = b43legacy_read32(dev,
B43legacy_MMIO_REV3PLUS_TSF_HIGH);
} while (unlikely(high != high2));
*tsf = high;
*tsf <<= 32;
*tsf |= low;
} else {
u64 tmp;
u16 v0;
u16 v1;
u16 v2;
u16 v3;
u16 test1;
u16 test2;
u16 test3;
do {
v3 = b43legacy_read16(dev, B43legacy_MMIO_TSF_3);
v2 = b43legacy_read16(dev, B43legacy_MMIO_TSF_2);
v1 = b43legacy_read16(dev, B43legacy_MMIO_TSF_1);
v0 = b43legacy_read16(dev, B43legacy_MMIO_TSF_0);
test3 = b43legacy_read16(dev, B43legacy_MMIO_TSF_3);
test2 = b43legacy_read16(dev, B43legacy_MMIO_TSF_2);
test1 = b43legacy_read16(dev, B43legacy_MMIO_TSF_1);
} while (v3 != test3 || v2 != test2 || v1 != test1);
*tsf = v3;
*tsf <<= 48;
tmp = v2;
tmp <<= 32;
*tsf |= tmp;
tmp = v1;
tmp <<= 16;
*tsf |= tmp;
*tsf |= v0;
}
}
static void b43legacy_time_lock(struct b43legacy_wldev *dev)
{
u32 status;
status = b43legacy_read32(dev, B43legacy_MMIO_MACCTL);
status |= B43legacy_MACCTL_TBTTHOLD;
b43legacy_write32(dev, B43legacy_MMIO_MACCTL, status);
mmiowb();
}
static void b43legacy_time_unlock(struct b43legacy_wldev *dev)
{
u32 status;
status = b43legacy_read32(dev, B43legacy_MMIO_MACCTL);
status &= ~B43legacy_MACCTL_TBTTHOLD;
b43legacy_write32(dev, B43legacy_MMIO_MACCTL, status);
}
static void b43legacy_tsf_write_locked(struct b43legacy_wldev *dev, u64 tsf)
{
/* Be careful with the in-progress timer.
* First zero out the low register, so we have a full
* register-overflow duration to complete the operation.
*/
if (dev->dev->id.revision >= 3) {
u32 lo = (tsf & 0x00000000FFFFFFFFULL);
u32 hi = (tsf & 0xFFFFFFFF00000000ULL) >> 32;
b43legacy_write32(dev, B43legacy_MMIO_REV3PLUS_TSF_LOW, 0);
mmiowb();
b43legacy_write32(dev, B43legacy_MMIO_REV3PLUS_TSF_HIGH,
hi);
mmiowb();
b43legacy_write32(dev, B43legacy_MMIO_REV3PLUS_TSF_LOW,
lo);
} else {
u16 v0 = (tsf & 0x000000000000FFFFULL);
u16 v1 = (tsf & 0x00000000FFFF0000ULL) >> 16;
u16 v2 = (tsf & 0x0000FFFF00000000ULL) >> 32;
u16 v3 = (tsf & 0xFFFF000000000000ULL) >> 48;
b43legacy_write16(dev, B43legacy_MMIO_TSF_0, 0);
mmiowb();
b43legacy_write16(dev, B43legacy_MMIO_TSF_3, v3);
mmiowb();
b43legacy_write16(dev, B43legacy_MMIO_TSF_2, v2);
mmiowb();
b43legacy_write16(dev, B43legacy_MMIO_TSF_1, v1);
mmiowb();
b43legacy_write16(dev, B43legacy_MMIO_TSF_0, v0);
}
}
void b43legacy_tsf_write(struct b43legacy_wldev *dev, u64 tsf)
{
b43legacy_time_lock(dev);
b43legacy_tsf_write_locked(dev, tsf);
b43legacy_time_unlock(dev);
}
static
void b43legacy_macfilter_set(struct b43legacy_wldev *dev,
u16 offset, const u8 *mac)
{
static const u8 zero_addr[ETH_ALEN] = { 0 };
u16 data;
if (!mac)
mac = zero_addr;
offset |= 0x0020;
b43legacy_write16(dev, B43legacy_MMIO_MACFILTER_CONTROL, offset);
data = mac[0];
data |= mac[1] << 8;
b43legacy_write16(dev, B43legacy_MMIO_MACFILTER_DATA, data);
data = mac[2];
data |= mac[3] << 8;
b43legacy_write16(dev, B43legacy_MMIO_MACFILTER_DATA, data);
data = mac[4];
data |= mac[5] << 8;
b43legacy_write16(dev, B43legacy_MMIO_MACFILTER_DATA, data);
}
static void b43legacy_write_mac_bssid_templates(struct b43legacy_wldev *dev)
{
static const u8 zero_addr[ETH_ALEN] = { 0 };
const u8 *mac = dev->wl->mac_addr;
const u8 *bssid = dev->wl->bssid;
u8 mac_bssid[ETH_ALEN * 2];
int i;
u32 tmp;
if (!bssid)
bssid = zero_addr;
if (!mac)
mac = zero_addr;
b43legacy_macfilter_set(dev, B43legacy_MACFILTER_BSSID, bssid);
memcpy(mac_bssid, mac, ETH_ALEN);
memcpy(mac_bssid + ETH_ALEN, bssid, ETH_ALEN);
/* Write our MAC address and BSSID to template ram */
for (i = 0; i < ARRAY_SIZE(mac_bssid); i += sizeof(u32)) {
tmp = (u32)(mac_bssid[i + 0]);
tmp |= (u32)(mac_bssid[i + 1]) << 8;
tmp |= (u32)(mac_bssid[i + 2]) << 16;
tmp |= (u32)(mac_bssid[i + 3]) << 24;
b43legacy_ram_write(dev, 0x20 + i, tmp);
b43legacy_ram_write(dev, 0x78 + i, tmp);
b43legacy_ram_write(dev, 0x478 + i, tmp);
}
}
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
static void b43legacy_upload_card_macaddress(struct b43legacy_wldev *dev)
{
b43legacy_write_mac_bssid_templates(dev);
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
b43legacy_macfilter_set(dev, B43legacy_MACFILTER_SELF,
dev->wl->mac_addr);
}
static void b43legacy_set_slot_time(struct b43legacy_wldev *dev,
u16 slot_time)
{
/* slot_time is in usec. */
if (dev->phy.type != B43legacy_PHYTYPE_G)
return;
b43legacy_write16(dev, 0x684, 510 + slot_time);
b43legacy_shm_write16(dev, B43legacy_SHM_SHARED, 0x0010,
slot_time);
}
static void b43legacy_short_slot_timing_enable(struct b43legacy_wldev *dev)
{
b43legacy_set_slot_time(dev, 9);
}
static void b43legacy_short_slot_timing_disable(struct b43legacy_wldev *dev)
{
b43legacy_set_slot_time(dev, 20);
}
/* Synchronize IRQ top- and bottom-half.
* IRQs must be masked before calling this.
* This must not be called with the irq_lock held.
*/
static void b43legacy_synchronize_irq(struct b43legacy_wldev *dev)
{
synchronize_irq(dev->dev->irq);
tasklet_kill(&dev->isr_tasklet);
}
/* DummyTransmission function, as documented on
* http://bcm-specs.sipsolutions.net/DummyTransmission
*/
void b43legacy_dummy_transmission(struct b43legacy_wldev *dev)
{
struct b43legacy_phy *phy = &dev->phy;
unsigned int i;
unsigned int max_loop;
u16 value;
u32 buffer[5] = {
0x00000000,
0x00D40000,
0x00000000,
0x01000000,
0x00000000,
};
switch (phy->type) {
case B43legacy_PHYTYPE_B:
case B43legacy_PHYTYPE_G:
max_loop = 0xFA;
buffer[0] = 0x000B846E;
break;
default:
B43legacy_BUG_ON(1);
return;
}
for (i = 0; i < 5; i++)
b43legacy_ram_write(dev, i * 4, buffer[i]);
/* dummy read follows */
b43legacy_read32(dev, B43legacy_MMIO_MACCTL);
b43legacy_write16(dev, 0x0568, 0x0000);
b43legacy_write16(dev, 0x07C0, 0x0000);
b43legacy_write16(dev, 0x050C, 0x0000);
b43legacy_write16(dev, 0x0508, 0x0000);
b43legacy_write16(dev, 0x050A, 0x0000);
b43legacy_write16(dev, 0x054C, 0x0000);
b43legacy_write16(dev, 0x056A, 0x0014);
b43legacy_write16(dev, 0x0568, 0x0826);
b43legacy_write16(dev, 0x0500, 0x0000);
b43legacy_write16(dev, 0x0502, 0x0030);
if (phy->radio_ver == 0x2050 && phy->radio_rev <= 0x5)
b43legacy_radio_write16(dev, 0x0051, 0x0017);
for (i = 0x00; i < max_loop; i++) {
value = b43legacy_read16(dev, 0x050E);
if (value & 0x0080)
break;
udelay(10);
}
for (i = 0x00; i < 0x0A; i++) {
value = b43legacy_read16(dev, 0x050E);
if (value & 0x0400)
break;
udelay(10);
}
for (i = 0x00; i < 0x0A; i++) {
value = b43legacy_read16(dev, 0x0690);
if (!(value & 0x0100))
break;
udelay(10);
}
if (phy->radio_ver == 0x2050 && phy->radio_rev <= 0x5)
b43legacy_radio_write16(dev, 0x0051, 0x0037);
}
/* Turn the Analog ON/OFF */
static void b43legacy_switch_analog(struct b43legacy_wldev *dev, int on)
{
b43legacy_write16(dev, B43legacy_MMIO_PHY0, on ? 0 : 0xF4);
}
void b43legacy_wireless_core_reset(struct b43legacy_wldev *dev, u32 flags)
{
u32 tmslow;
u32 macctl;
flags |= B43legacy_TMSLOW_PHYCLKEN;
flags |= B43legacy_TMSLOW_PHYRESET;
ssb_device_enable(dev->dev, flags);
msleep(2); /* Wait for the PLL to turn on. */
/* Now take the PHY out of Reset again */
tmslow = ssb_read32(dev->dev, SSB_TMSLOW);
tmslow |= SSB_TMSLOW_FGC;
tmslow &= ~B43legacy_TMSLOW_PHYRESET;
ssb_write32(dev->dev, SSB_TMSLOW, tmslow);
ssb_read32(dev->dev, SSB_TMSLOW); /* flush */
msleep(1);
tmslow &= ~SSB_TMSLOW_FGC;
ssb_write32(dev->dev, SSB_TMSLOW, tmslow);
ssb_read32(dev->dev, SSB_TMSLOW); /* flush */
msleep(1);
/* Turn Analog ON */
b43legacy_switch_analog(dev, 1);
macctl = b43legacy_read32(dev, B43legacy_MMIO_MACCTL);
macctl &= ~B43legacy_MACCTL_GMODE;
if (flags & B43legacy_TMSLOW_GMODE) {
macctl |= B43legacy_MACCTL_GMODE;
dev->phy.gmode = true;
} else
dev->phy.gmode = false;
macctl |= B43legacy_MACCTL_IHR_ENABLED;
b43legacy_write32(dev, B43legacy_MMIO_MACCTL, macctl);
}
static void handle_irq_transmit_status(struct b43legacy_wldev *dev)
{
u32 v0;
u32 v1;
u16 tmp;
struct b43legacy_txstatus stat;
while (1) {
v0 = b43legacy_read32(dev, B43legacy_MMIO_XMITSTAT_0);
if (!(v0 & 0x00000001))
break;
v1 = b43legacy_read32(dev, B43legacy_MMIO_XMITSTAT_1);
stat.cookie = (v0 >> 16);
stat.seq = (v1 & 0x0000FFFF);
stat.phy_stat = ((v1 & 0x00FF0000) >> 16);
tmp = (v0 & 0x0000FFFF);
stat.frame_count = ((tmp & 0xF000) >> 12);
stat.rts_count = ((tmp & 0x0F00) >> 8);
stat.supp_reason = ((tmp & 0x001C) >> 2);
stat.pm_indicated = !!(tmp & 0x0080);
stat.intermediate = !!(tmp & 0x0040);
stat.for_ampdu = !!(tmp & 0x0020);
stat.acked = !!(tmp & 0x0002);
b43legacy_handle_txstatus(dev, &stat);
}
}
static void drain_txstatus_queue(struct b43legacy_wldev *dev)
{
u32 dummy;
if (dev->dev->id.revision < 5)
return;
/* Read all entries from the microcode TXstatus FIFO
* and throw them away.
*/
while (1) {
dummy = b43legacy_read32(dev, B43legacy_MMIO_XMITSTAT_0);
if (!(dummy & 0x00000001))
break;
dummy = b43legacy_read32(dev, B43legacy_MMIO_XMITSTAT_1);
}
}
static u32 b43legacy_jssi_read(struct b43legacy_wldev *dev)
{
u32 val = 0;
val = b43legacy_shm_read16(dev, B43legacy_SHM_SHARED, 0x40A);
val <<= 16;
val |= b43legacy_shm_read16(dev, B43legacy_SHM_SHARED, 0x408);
return val;
}
static void b43legacy_jssi_write(struct b43legacy_wldev *dev, u32 jssi)
{
b43legacy_shm_write16(dev, B43legacy_SHM_SHARED, 0x408,
(jssi & 0x0000FFFF));
b43legacy_shm_write16(dev, B43legacy_SHM_SHARED, 0x40A,
(jssi & 0xFFFF0000) >> 16);
}
static void b43legacy_generate_noise_sample(struct b43legacy_wldev *dev)
{
b43legacy_jssi_write(dev, 0x7F7F7F7F);
b43legacy_write32(dev, B43legacy_MMIO_MACCMD,
b43legacy_read32(dev, B43legacy_MMIO_MACCMD)
| B43legacy_MACCMD_BGNOISE);
B43legacy_WARN_ON(dev->noisecalc.channel_at_start !=
dev->phy.channel);
}
static void b43legacy_calculate_link_quality(struct b43legacy_wldev *dev)
{
/* Top half of Link Quality calculation. */
if (dev->noisecalc.calculation_running)
return;
dev->noisecalc.channel_at_start = dev->phy.channel;
dev->noisecalc.calculation_running = true;
dev->noisecalc.nr_samples = 0;
b43legacy_generate_noise_sample(dev);
}
static void handle_irq_noise(struct b43legacy_wldev *dev)
{
struct b43legacy_phy *phy = &dev->phy;
u16 tmp;
u8 noise[4];
u8 i;
u8 j;
s32 average;
/* Bottom half of Link Quality calculation. */
B43legacy_WARN_ON(!dev->noisecalc.calculation_running);
if (dev->noisecalc.channel_at_start != phy->channel)
goto drop_calculation;
*((__le32 *)noise) = cpu_to_le32(b43legacy_jssi_read(dev));
if (noise[0] == 0x7F || noise[1] == 0x7F ||
noise[2] == 0x7F || noise[3] == 0x7F)
goto generate_new;
/* Get the noise samples. */
B43legacy_WARN_ON(dev->noisecalc.nr_samples >= 8);
i = dev->noisecalc.nr_samples;
noise[0] = clamp_val(noise[0], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
noise[1] = clamp_val(noise[1], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
noise[2] = clamp_val(noise[2], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
noise[3] = clamp_val(noise[3], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
dev->noisecalc.samples[i][0] = phy->nrssi_lt[noise[0]];
dev->noisecalc.samples[i][1] = phy->nrssi_lt[noise[1]];
dev->noisecalc.samples[i][2] = phy->nrssi_lt[noise[2]];
dev->noisecalc.samples[i][3] = phy->nrssi_lt[noise[3]];
dev->noisecalc.nr_samples++;
if (dev->noisecalc.nr_samples == 8) {
/* Calculate the Link Quality by the noise samples. */
average = 0;
for (i = 0; i < 8; i++) {
for (j = 0; j < 4; j++)
average += dev->noisecalc.samples[i][j];
}
average /= (8 * 4);
average *= 125;
average += 64;
average /= 128;
tmp = b43legacy_shm_read16(dev, B43legacy_SHM_SHARED,
0x40C);
tmp = (tmp / 128) & 0x1F;
if (tmp >= 8)
average += 2;
else
average -= 25;
if (tmp == 8)
average -= 72;
else
average -= 48;
dev->stats.link_noise = average;
drop_calculation:
dev->noisecalc.calculation_running = false;
return;
}
generate_new:
b43legacy_generate_noise_sample(dev);
}
static void handle_irq_tbtt_indication(struct b43legacy_wldev *dev)
{
if (b43legacy_is_mode(dev->wl, NL80211_IFTYPE_AP)) {
/* TODO: PS TBTT */
} else {
if (1/*FIXME: the last PSpoll frame was sent successfully */)
b43legacy_power_saving_ctl_bits(dev, -1, -1);
}
if (b43legacy_is_mode(dev->wl, NL80211_IFTYPE_ADHOC))
dev->dfq_valid = true;
}
static void handle_irq_atim_end(struct b43legacy_wldev *dev)
{
if (dev->dfq_valid) {
b43legacy_write32(dev, B43legacy_MMIO_MACCMD,
b43legacy_read32(dev, B43legacy_MMIO_MACCMD)
| B43legacy_MACCMD_DFQ_VALID);
dev->dfq_valid = false;
}
}
static void handle_irq_pmq(struct b43legacy_wldev *dev)
{
u32 tmp;
/* TODO: AP mode. */
while (1) {
tmp = b43legacy_read32(dev, B43legacy_MMIO_PS_STATUS);
if (!(tmp & 0x00000008))
break;
}
/* 16bit write is odd, but correct. */
b43legacy_write16(dev, B43legacy_MMIO_PS_STATUS, 0x0002);
}
static void b43legacy_write_template_common(struct b43legacy_wldev *dev,
const u8 *data, u16 size,
u16 ram_offset,
u16 shm_size_offset, u8 rate)
{
u32 i;
u32 tmp;
struct b43legacy_plcp_hdr4 plcp;
plcp.data = 0;
b43legacy_generate_plcp_hdr(&plcp, size + FCS_LEN, rate);
b43legacy_ram_write(dev, ram_offset, le32_to_cpu(plcp.data));
ram_offset += sizeof(u32);
/* The PLCP is 6 bytes long, but we only wrote 4 bytes, yet.
* So leave the first two bytes of the next write blank.
*/
tmp = (u32)(data[0]) << 16;
tmp |= (u32)(data[1]) << 24;
b43legacy_ram_write(dev, ram_offset, tmp);
ram_offset += sizeof(u32);
for (i = 2; i < size; i += sizeof(u32)) {
tmp = (u32)(data[i + 0]);
if (i + 1 < size)
tmp |= (u32)(data[i + 1]) << 8;
if (i + 2 < size)
tmp |= (u32)(data[i + 2]) << 16;
if (i + 3 < size)
tmp |= (u32)(data[i + 3]) << 24;
b43legacy_ram_write(dev, ram_offset + i - 2, tmp);
}
b43legacy_shm_write16(dev, B43legacy_SHM_SHARED, shm_size_offset,
size + sizeof(struct b43legacy_plcp_hdr6));
}
/* Convert a b43legacy antenna number value to the PHY TX control value. */
static u16 b43legacy_antenna_to_phyctl(int antenna)
{
switch (antenna) {
case B43legacy_ANTENNA0:
return B43legacy_TX4_PHY_ANT0;
case B43legacy_ANTENNA1:
return B43legacy_TX4_PHY_ANT1;
}
return B43legacy_TX4_PHY_ANTLAST;
}
static void b43legacy_write_beacon_template(struct b43legacy_wldev *dev,
u16 ram_offset,
u16 shm_size_offset)
{
unsigned int i, len, variable_len;
const struct ieee80211_mgmt *bcn;
const u8 *ie;
bool tim_found = false;
unsigned int rate;
u16 ctl;
int antenna;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(dev->wl->current_beacon);
bcn = (const struct ieee80211_mgmt *)(dev->wl->current_beacon->data);
len = min((size_t)dev->wl->current_beacon->len,
0x200 - sizeof(struct b43legacy_plcp_hdr6));
rate = ieee80211_get_tx_rate(dev->wl->hw, info)->hw_value;
b43legacy_write_template_common(dev, (const u8 *)bcn, len, ram_offset,
shm_size_offset, rate);
/* Write the PHY TX control parameters. */
antenna = B43legacy_ANTENNA_DEFAULT;
antenna = b43legacy_antenna_to_phyctl(antenna);
ctl = b43legacy_shm_read16(dev, B43legacy_SHM_SHARED,
B43legacy_SHM_SH_BEACPHYCTL);
/* We can't send beacons with short preamble. Would get PHY errors. */
ctl &= ~B43legacy_TX4_PHY_SHORTPRMBL;
ctl &= ~B43legacy_TX4_PHY_ANT;
ctl &= ~B43legacy_TX4_PHY_ENC;
ctl |= antenna;
ctl |= B43legacy_TX4_PHY_ENC_CCK;
b43legacy_shm_write16(dev, B43legacy_SHM_SHARED,
B43legacy_SHM_SH_BEACPHYCTL, ctl);
/* Find the position of the TIM and the DTIM_period value
* and write them to SHM. */
ie = bcn->u.beacon.variable;
variable_len = len - offsetof(struct ieee80211_mgmt, u.beacon.variable);
for (i = 0; i < variable_len - 2; ) {
uint8_t ie_id, ie_len;
ie_id = ie[i];
ie_len = ie[i + 1];
if (ie_id == 5) {
u16 tim_position;
u16 dtim_period;
/* This is the TIM Information Element */
/* Check whether the ie_len is in the beacon data range. */
if (variable_len < ie_len + 2 + i)
break;
/* A valid TIM is at least 4 bytes long. */
if (ie_len < 4)
break;
tim_found = true;
tim_position = sizeof(struct b43legacy_plcp_hdr6);
tim_position += offsetof(struct ieee80211_mgmt,
u.beacon.variable);
tim_position += i;
dtim_period = ie[i + 3];
b43legacy_shm_write16(dev, B43legacy_SHM_SHARED,
B43legacy_SHM_SH_TIMPOS, tim_position);
b43legacy_shm_write16(dev, B43legacy_SHM_SHARED,
B43legacy_SHM_SH_DTIMP, dtim_period);
break;
}
i += ie_len + 2;
}
if (!tim_found) {
b43legacywarn(dev->wl, "Did not find a valid TIM IE in the "
"beacon template packet. AP or IBSS operation "
"may be broken.\n");
} else
b43legacydbg(dev->wl, "Updated beacon template\n");
}
static void b43legacy_write_probe_resp_plcp(struct b43legacy_wldev *dev,
u16 shm_offset, u16 size,
struct ieee80211_rate *rate)
{
struct b43legacy_plcp_hdr4 plcp;
u32 tmp;
__le16 dur;
plcp.data = 0;
b43legacy_generate_plcp_hdr(&plcp, size + FCS_LEN, rate->hw_value);
dur = ieee80211_generic_frame_duration(dev->wl->hw,
dev->wl->vif,
IEEE80211_BAND_2GHZ,
size,
rate);
/* Write PLCP in two parts and timing for packet transfer */
tmp = le32_to_cpu(plcp.data);
b43legacy_shm_write16(dev, B43legacy_SHM_SHARED, shm_offset,
tmp & 0xFFFF);
b43legacy_shm_write16(dev, B43legacy_SHM_SHARED, shm_offset + 2,
tmp >> 16);
b43legacy_shm_write16(dev, B43legacy_SHM_SHARED, shm_offset + 6,
le16_to_cpu(dur));
}
/* Instead of using custom probe response template, this function
* just patches custom beacon template by:
* 1) Changing packet type
* 2) Patching duration field
* 3) Stripping TIM
*/
static const u8 *b43legacy_generate_probe_resp(struct b43legacy_wldev *dev,
u16 *dest_size,
struct ieee80211_rate *rate)
{
const u8 *src_data;
u8 *dest_data;
u16 src_size, elem_size, src_pos, dest_pos;
__le16 dur;
struct ieee80211_hdr *hdr;
size_t ie_start;
src_size = dev->wl->current_beacon->len;
src_data = (const u8 *)dev->wl->current_beacon->data;
/* Get the start offset of the variable IEs in the packet. */
ie_start = offsetof(struct ieee80211_mgmt, u.probe_resp.variable);
B43legacy_WARN_ON(ie_start != offsetof(struct ieee80211_mgmt,
u.beacon.variable));
if (B43legacy_WARN_ON(src_size < ie_start))
return NULL;
dest_data = kmalloc(src_size, GFP_ATOMIC);
if (unlikely(!dest_data))
return NULL;
/* Copy the static data and all Information Elements, except the TIM. */
memcpy(dest_data, src_data, ie_start);
src_pos = ie_start;
dest_pos = ie_start;
for ( ; src_pos < src_size - 2; src_pos += elem_size) {
elem_size = src_data[src_pos + 1] + 2;
if (src_data[src_pos] == 5) {
/* This is the TIM. */
continue;
}
memcpy(dest_data + dest_pos, src_data + src_pos, elem_size);
dest_pos += elem_size;
}
*dest_size = dest_pos;
hdr = (struct ieee80211_hdr *)dest_data;
/* Set the frame control. */
hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
IEEE80211_STYPE_PROBE_RESP);
dur = ieee80211_generic_frame_duration(dev->wl->hw,
dev->wl->vif,
IEEE80211_BAND_2GHZ,
*dest_size,
rate);
hdr->duration_id = dur;
return dest_data;
}
static void b43legacy_write_probe_resp_template(struct b43legacy_wldev *dev,
u16 ram_offset,
u16 shm_size_offset,
struct ieee80211_rate *rate)
{
const u8 *probe_resp_data;
u16 size;
size = dev->wl->current_beacon->len;
probe_resp_data = b43legacy_generate_probe_resp(dev, &size, rate);
if (unlikely(!probe_resp_data))
return;
/* Looks like PLCP headers plus packet timings are stored for
* all possible basic rates
*/
b43legacy_write_probe_resp_plcp(dev, 0x31A, size,
&b43legacy_b_ratetable[0]);
b43legacy_write_probe_resp_plcp(dev, 0x32C, size,
&b43legacy_b_ratetable[1]);
b43legacy_write_probe_resp_plcp(dev, 0x33E, size,
&b43legacy_b_ratetable[2]);
b43legacy_write_probe_resp_plcp(dev, 0x350, size,
&b43legacy_b_ratetable[3]);
size = min((size_t)size,
0x200 - sizeof(struct b43legacy_plcp_hdr6));
b43legacy_write_template_common(dev, probe_resp_data,
size, ram_offset,
shm_size_offset, rate->hw_value);
kfree(probe_resp_data);
}
static void b43legacy_upload_beacon0(struct b43legacy_wldev *dev)
{
struct b43legacy_wl *wl = dev->wl;
if (wl->beacon0_uploaded)
return;
b43legacy_write_beacon_template(dev, 0x68, 0x18);
/* FIXME: Probe resp upload doesn't really belong here,
* but we don't use that feature anyway. */
b43legacy_write_probe_resp_template(dev, 0x268, 0x4A,
&__b43legacy_ratetable[3]);
wl->beacon0_uploaded = true;
}
static void b43legacy_upload_beacon1(struct b43legacy_wldev *dev)
{
struct b43legacy_wl *wl = dev->wl;
if (wl->beacon1_uploaded)
return;
b43legacy_write_beacon_template(dev, 0x468, 0x1A);
wl->beacon1_uploaded = true;
}
static void handle_irq_beacon(struct b43legacy_wldev *dev)
{
struct b43legacy_wl *wl = dev->wl;
u32 cmd, beacon0_valid, beacon1_valid;
if (!b43legacy_is_mode(wl, NL80211_IFTYPE_AP))
return;
/* This is the bottom half of the asynchronous beacon update. */
/* Ignore interrupt in the future. */
dev->irq_mask &= ~B43legacy_IRQ_BEACON;
cmd = b43legacy_read32(dev, B43legacy_MMIO_MACCMD);
beacon0_valid = (cmd & B43legacy_MACCMD_BEACON0_VALID);
beacon1_valid = (cmd & B43legacy_MACCMD_BEACON1_VALID);
/* Schedule interrupt manually, if busy. */
if (beacon0_valid && beacon1_valid) {
b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_REASON, B43legacy_IRQ_BEACON);
dev->irq_mask |= B43legacy_IRQ_BEACON;
return;
}
if (unlikely(wl->beacon_templates_virgin)) {
/* We never uploaded a beacon before.
* Upload both templates now, but only mark one valid. */
wl->beacon_templates_virgin = false;
b43legacy_upload_beacon0(dev);
b43legacy_upload_beacon1(dev);
cmd = b43legacy_read32(dev, B43legacy_MMIO_MACCMD);
cmd |= B43legacy_MACCMD_BEACON0_VALID;
b43legacy_write32(dev, B43legacy_MMIO_MACCMD, cmd);
} else {
if (!beacon0_valid) {
b43legacy_upload_beacon0(dev);
cmd = b43legacy_read32(dev, B43legacy_MMIO_MACCMD);
cmd |= B43legacy_MACCMD_BEACON0_VALID;
b43legacy_write32(dev, B43legacy_MMIO_MACCMD, cmd);
} else if (!beacon1_valid) {
b43legacy_upload_beacon1(dev);
cmd = b43legacy_read32(dev, B43legacy_MMIO_MACCMD);
cmd |= B43legacy_MACCMD_BEACON1_VALID;
b43legacy_write32(dev, B43legacy_MMIO_MACCMD, cmd);
}
}
}
static void b43legacy_beacon_update_trigger_work(struct work_struct *work)
{
struct b43legacy_wl *wl = container_of(work, struct b43legacy_wl,
beacon_update_trigger);
struct b43legacy_wldev *dev;
mutex_lock(&wl->mutex);
dev = wl->current_dev;
if (likely(dev && (b43legacy_status(dev) >= B43legacy_STAT_INITIALIZED))) {
spin_lock_irq(&wl->irq_lock);
/* Update beacon right away or defer to IRQ. */
handle_irq_beacon(dev);
/* The handler might have updated the IRQ mask. */
b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_MASK,
dev->irq_mask);
mmiowb();
spin_unlock_irq(&wl->irq_lock);
}
mutex_unlock(&wl->mutex);
}
/* Asynchronously update the packet templates in template RAM.
* Locking: Requires wl->irq_lock to be locked. */
static void b43legacy_update_templates(struct b43legacy_wl *wl)
{
struct sk_buff *beacon;
/* This is the top half of the ansynchronous beacon update. The bottom
* half is the beacon IRQ. Beacon update must be asynchronous to avoid
* sending an invalid beacon. This can happen for example, if the
* firmware transmits a beacon while we are updating it. */
/* We could modify the existing beacon and set the aid bit in the TIM
* field, but that would probably require resizing and moving of data
* within the beacon template. Simply request a new beacon and let
* mac80211 do the hard work. */
beacon = ieee80211_beacon_get(wl->hw, wl->vif);
if (unlikely(!beacon))
return;
if (wl->current_beacon)
dev_kfree_skb_any(wl->current_beacon);
wl->current_beacon = beacon;
wl->beacon0_uploaded = false;
wl->beacon1_uploaded = false;
ieee80211_queue_work(wl->hw, &wl->beacon_update_trigger);
}
static void b43legacy_set_beacon_int(struct b43legacy_wldev *dev,
u16 beacon_int)
{
b43legacy_time_lock(dev);
if (dev->dev->id.revision >= 3) {
b43legacy_write32(dev, B43legacy_MMIO_TSF_CFP_REP,
(beacon_int << 16));
b43legacy_write32(dev, B43legacy_MMIO_TSF_CFP_START,
(beacon_int << 10));
} else {
b43legacy_write16(dev, 0x606, (beacon_int >> 6));
b43legacy_write16(dev, 0x610, beacon_int);
}
b43legacy_time_unlock(dev);
b43legacydbg(dev->wl, "Set beacon interval to %u\n", beacon_int);
}
static void handle_irq_ucode_debug(struct b43legacy_wldev *dev)
{
}
/* Interrupt handler bottom-half */
static void b43legacy_interrupt_tasklet(struct b43legacy_wldev *dev)
{
u32 reason;
u32 dma_reason[ARRAY_SIZE(dev->dma_reason)];
u32 merged_dma_reason = 0;
int i;
unsigned long flags;
spin_lock_irqsave(&dev->wl->irq_lock, flags);
B43legacy_WARN_ON(b43legacy_status(dev) <
B43legacy_STAT_INITIALIZED);
reason = dev->irq_reason;
for (i = 0; i < ARRAY_SIZE(dma_reason); i++) {
dma_reason[i] = dev->dma_reason[i];
merged_dma_reason |= dma_reason[i];
}
if (unlikely(reason & B43legacy_IRQ_MAC_TXERR))
b43legacyerr(dev->wl, "MAC transmission error\n");
if (unlikely(reason & B43legacy_IRQ_PHY_TXERR)) {
b43legacyerr(dev->wl, "PHY transmission error\n");
rmb();
if (unlikely(atomic_dec_and_test(&dev->phy.txerr_cnt))) {
b43legacyerr(dev->wl, "Too many PHY TX errors, "
"restarting the controller\n");
b43legacy_controller_restart(dev, "PHY TX errors");
}
}
if (unlikely(merged_dma_reason & (B43legacy_DMAIRQ_FATALMASK |
B43legacy_DMAIRQ_NONFATALMASK))) {
if (merged_dma_reason & B43legacy_DMAIRQ_FATALMASK) {
b43legacyerr(dev->wl, "Fatal DMA error: "
"0x%08X, 0x%08X, 0x%08X, "
"0x%08X, 0x%08X, 0x%08X\n",
dma_reason[0], dma_reason[1],
dma_reason[2], dma_reason[3],
dma_reason[4], dma_reason[5]);
b43legacy_controller_restart(dev, "DMA error");
mmiowb();
spin_unlock_irqrestore(&dev->wl->irq_lock, flags);
return;
}
if (merged_dma_reason & B43legacy_DMAIRQ_NONFATALMASK)
b43legacyerr(dev->wl, "DMA error: "
"0x%08X, 0x%08X, 0x%08X, "
"0x%08X, 0x%08X, 0x%08X\n",
dma_reason[0], dma_reason[1],
dma_reason[2], dma_reason[3],
dma_reason[4], dma_reason[5]);
}
if (unlikely(reason & B43legacy_IRQ_UCODE_DEBUG))
handle_irq_ucode_debug(dev);
if (reason & B43legacy_IRQ_TBTT_INDI)
handle_irq_tbtt_indication(dev);
if (reason & B43legacy_IRQ_ATIM_END)
handle_irq_atim_end(dev);
if (reason & B43legacy_IRQ_BEACON)
handle_irq_beacon(dev);
if (reason & B43legacy_IRQ_PMQ)
handle_irq_pmq(dev);
if (reason & B43legacy_IRQ_TXFIFO_FLUSH_OK)
;/*TODO*/
if (reason & B43legacy_IRQ_NOISESAMPLE_OK)
handle_irq_noise(dev);
/* Check the DMA reason registers for received data. */
if (dma_reason[0] & B43legacy_DMAIRQ_RX_DONE) {
if (b43legacy_using_pio(dev))
b43legacy_pio_rx(dev->pio.queue0);
else
b43legacy_dma_rx(dev->dma.rx_ring0);
}
B43legacy_WARN_ON(dma_reason[1] & B43legacy_DMAIRQ_RX_DONE);
B43legacy_WARN_ON(dma_reason[2] & B43legacy_DMAIRQ_RX_DONE);
if (dma_reason[3] & B43legacy_DMAIRQ_RX_DONE) {
if (b43legacy_using_pio(dev))
b43legacy_pio_rx(dev->pio.queue3);
else
b43legacy_dma_rx(dev->dma.rx_ring3);
}
B43legacy_WARN_ON(dma_reason[4] & B43legacy_DMAIRQ_RX_DONE);
B43legacy_WARN_ON(dma_reason[5] & B43legacy_DMAIRQ_RX_DONE);
if (reason & B43legacy_IRQ_TX_OK)
handle_irq_transmit_status(dev);
b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_MASK, dev->irq_mask);
mmiowb();
spin_unlock_irqrestore(&dev->wl->irq_lock, flags);
}
static void pio_irq_workaround(struct b43legacy_wldev *dev,
u16 base, int queueidx)
{
u16 rxctl;
rxctl = b43legacy_read16(dev, base + B43legacy_PIO_RXCTL);
if (rxctl & B43legacy_PIO_RXCTL_DATAAVAILABLE)
dev->dma_reason[queueidx] |= B43legacy_DMAIRQ_RX_DONE;
else
dev->dma_reason[queueidx] &= ~B43legacy_DMAIRQ_RX_DONE;
}
static void b43legacy_interrupt_ack(struct b43legacy_wldev *dev, u32 reason)
{
if (b43legacy_using_pio(dev) &&
(dev->dev->id.revision < 3) &&
(!(reason & B43legacy_IRQ_PIO_WORKAROUND))) {
/* Apply a PIO specific workaround to the dma_reasons */
pio_irq_workaround(dev, B43legacy_MMIO_PIO1_BASE, 0);
pio_irq_workaround(dev, B43legacy_MMIO_PIO2_BASE, 1);
pio_irq_workaround(dev, B43legacy_MMIO_PIO3_BASE, 2);
pio_irq_workaround(dev, B43legacy_MMIO_PIO4_BASE, 3);
}
b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_REASON, reason);
b43legacy_write32(dev, B43legacy_MMIO_DMA0_REASON,
dev->dma_reason[0]);
b43legacy_write32(dev, B43legacy_MMIO_DMA1_REASON,
dev->dma_reason[1]);
b43legacy_write32(dev, B43legacy_MMIO_DMA2_REASON,
dev->dma_reason[2]);
b43legacy_write32(dev, B43legacy_MMIO_DMA3_REASON,
dev->dma_reason[3]);
b43legacy_write32(dev, B43legacy_MMIO_DMA4_REASON,
dev->dma_reason[4]);
b43legacy_write32(dev, B43legacy_MMIO_DMA5_REASON,
dev->dma_reason[5]);
}
/* Interrupt handler top-half */
static irqreturn_t b43legacy_interrupt_handler(int irq, void *dev_id)
{
irqreturn_t ret = IRQ_NONE;
struct b43legacy_wldev *dev = dev_id;
u32 reason;
B43legacy_WARN_ON(!dev);
spin_lock(&dev->wl->irq_lock);
if (unlikely(b43legacy_status(dev) < B43legacy_STAT_STARTED))
/* This can only happen on shared IRQ lines. */
goto out;
reason = b43legacy_read32(dev, B43legacy_MMIO_GEN_IRQ_REASON);
if (reason == 0xffffffff) /* shared IRQ */
goto out;
ret = IRQ_HANDLED;
reason &= dev->irq_mask;
if (!reason)
goto out;
dev->dma_reason[0] = b43legacy_read32(dev,
B43legacy_MMIO_DMA0_REASON)
& 0x0001DC00;
dev->dma_reason[1] = b43legacy_read32(dev,
B43legacy_MMIO_DMA1_REASON)
& 0x0000DC00;
dev->dma_reason[2] = b43legacy_read32(dev,
B43legacy_MMIO_DMA2_REASON)
& 0x0000DC00;
dev->dma_reason[3] = b43legacy_read32(dev,
B43legacy_MMIO_DMA3_REASON)
& 0x0001DC00;
dev->dma_reason[4] = b43legacy_read32(dev,
B43legacy_MMIO_DMA4_REASON)
& 0x0000DC00;
dev->dma_reason[5] = b43legacy_read32(dev,
B43legacy_MMIO_DMA5_REASON)
& 0x0000DC00;
b43legacy_interrupt_ack(dev, reason);
/* Disable all IRQs. They are enabled again in the bottom half. */
b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_MASK, 0);
/* Save the reason code and call our bottom half. */
dev->irq_reason = reason;
tasklet_schedule(&dev->isr_tasklet);
out:
mmiowb();
spin_unlock(&dev->wl->irq_lock);
return ret;
}
static void b43legacy_release_firmware(struct b43legacy_wldev *dev)
{
release_firmware(dev->fw.ucode);
dev->fw.ucode = NULL;
release_firmware(dev->fw.pcm);
dev->fw.pcm = NULL;
release_firmware(dev->fw.initvals);
dev->fw.initvals = NULL;
release_firmware(dev->fw.initvals_band);
dev->fw.initvals_band = NULL;
}
static void b43legacy_print_fw_helptext(struct b43legacy_wl *wl)
{
b43legacyerr(wl, "You must go to http://wireless.kernel.org/en/users/"
"Drivers/b43#devicefirmware "
"and download the correct firmware (version 3).\n");
}
static void b43legacy_fw_cb(const struct firmware *firmware, void *context)
{
struct b43legacy_wldev *dev = context;
dev->fwp = firmware;
complete(&dev->fw_load_complete);
}
static int do_request_fw(struct b43legacy_wldev *dev,
const char *name,
const struct firmware **fw, bool async)
{
char path[sizeof(modparam_fwpostfix) + 32];
struct b43legacy_fw_header *hdr;
u32 size;
int err;
if (!name)
return 0;
snprintf(path, ARRAY_SIZE(path),
"b43legacy%s/%s.fw",
modparam_fwpostfix, name);
b43legacyinfo(dev->wl, "Loading firmware %s\n", path);
if (async) {
init_completion(&dev->fw_load_complete);
err = request_firmware_nowait(THIS_MODULE, 1, path,
dev->dev->dev, GFP_KERNEL,
dev, b43legacy_fw_cb);
if (err) {
b43legacyerr(dev->wl, "Unable to load firmware\n");
return err;
}
/* stall here until fw ready */
wait_for_completion(&dev->fw_load_complete);
if (!dev->fwp)
err = -EINVAL;
*fw = dev->fwp;
} else {
err = request_firmware(fw, path, dev->dev->dev);
}
if (err) {
b43legacyerr(dev->wl, "Firmware file \"%s\" not found "
"or load failed.\n", path);
return err;
}
if ((*fw)->size < sizeof(struct b43legacy_fw_header))
goto err_format;
hdr = (struct b43legacy_fw_header *)((*fw)->data);
switch (hdr->type) {
case B43legacy_FW_TYPE_UCODE:
case B43legacy_FW_TYPE_PCM:
size = be32_to_cpu(hdr->size);
if (size != (*fw)->size - sizeof(struct b43legacy_fw_header))
goto err_format;
/* fallthrough */
case B43legacy_FW_TYPE_IV:
if (hdr->ver != 1)
goto err_format;
break;
default:
goto err_format;
}
return err;
err_format:
b43legacyerr(dev->wl, "Firmware file \"%s\" format error.\n", path);
return -EPROTO;
}
static int b43legacy_one_core_attach(struct ssb_device *dev,
struct b43legacy_wl *wl);
static void b43legacy_one_core_detach(struct ssb_device *dev);
static void b43legacy_request_firmware(struct work_struct *work)
{
struct b43legacy_wl *wl = container_of(work,
struct b43legacy_wl, firmware_load);
struct b43legacy_wldev *dev = wl->current_dev;
struct b43legacy_firmware *fw = &dev->fw;
const u8 rev = dev->dev->id.revision;
const char *filename;
int err;
if (!fw->ucode) {
if (rev == 2)
filename = "ucode2";
else if (rev == 4)
filename = "ucode4";
else
filename = "ucode5";
err = do_request_fw(dev, filename, &fw->ucode, true);
if (err)
goto err_load;
}
if (!fw->pcm) {
if (rev < 5)
filename = "pcm4";
else
filename = "pcm5";
err = do_request_fw(dev, filename, &fw->pcm, false);
if (err)
goto err_load;
}
if (!fw->initvals) {
switch (dev->phy.type) {
case B43legacy_PHYTYPE_B:
case B43legacy_PHYTYPE_G:
if ((rev >= 5) && (rev <= 10))
filename = "b0g0initvals5";
else if (rev == 2 || rev == 4)
filename = "b0g0initvals2";
else
goto err_no_initvals;
break;
default:
goto err_no_initvals;
}
err = do_request_fw(dev, filename, &fw->initvals, false);
if (err)
goto err_load;
}
if (!fw->initvals_band) {
switch (dev->phy.type) {
case B43legacy_PHYTYPE_B:
case B43legacy_PHYTYPE_G:
if ((rev >= 5) && (rev <= 10))
filename = "b0g0bsinitvals5";
else if (rev >= 11)
filename = NULL;
else if (rev == 2 || rev == 4)
filename = NULL;
else
goto err_no_initvals;
break;
default:
goto err_no_initvals;
}
err = do_request_fw(dev, filename, &fw->initvals_band, false);
if (err)
goto err_load;
}
err = ieee80211_register_hw(wl->hw);
if (err)
goto err_one_core_detach;
return;
err_one_core_detach:
b43legacy_one_core_detach(dev->dev);
goto error;
err_load:
b43legacy_print_fw_helptext(dev->wl);
goto error;
err_no_initvals:
err = -ENODEV;
b43legacyerr(dev->wl, "No Initial Values firmware file for PHY %u, "
"core rev %u\n", dev->phy.type, rev);
goto error;
error:
b43legacy_release_firmware(dev);
return;
}
static int b43legacy_upload_microcode(struct b43legacy_wldev *dev)
{
struct wiphy *wiphy = dev->wl->hw->wiphy;
const size_t hdr_len = sizeof(struct b43legacy_fw_header);
const __be32 *data;
unsigned int i;
unsigned int len;
u16 fwrev;
u16 fwpatch;
u16 fwdate;
u16 fwtime;
u32 tmp, macctl;
int err = 0;
/* Jump the microcode PSM to offset 0 */
macctl = b43legacy_read32(dev, B43legacy_MMIO_MACCTL);
B43legacy_WARN_ON(macctl & B43legacy_MACCTL_PSM_RUN);
macctl |= B43legacy_MACCTL_PSM_JMP0;
b43legacy_write32(dev, B43legacy_MMIO_MACCTL, macctl);
/* Zero out all microcode PSM registers and shared memory. */
for (i = 0; i < 64; i++)
b43legacy_shm_write16(dev, B43legacy_SHM_WIRELESS, i, 0);
for (i = 0; i < 4096; i += 2)
b43legacy_shm_write16(dev, B43legacy_SHM_SHARED, i, 0);
/* Upload Microcode. */
data = (__be32 *) (dev->fw.ucode->data + hdr_len);
len = (dev->fw.ucode->size - hdr_len) / sizeof(__be32);
b43legacy_shm_control_word(dev,
B43legacy_SHM_UCODE |
B43legacy_SHM_AUTOINC_W,
0x0000);
for (i = 0; i < len; i++) {
b43legacy_write32(dev, B43legacy_MMIO_SHM_DATA,
be32_to_cpu(data[i]));
udelay(10);
}
if (dev->fw.pcm) {
/* Upload PCM data. */
data = (__be32 *) (dev->fw.pcm->data + hdr_len);
len = (dev->fw.pcm->size - hdr_len) / sizeof(__be32);
b43legacy_shm_control_word(dev, B43legacy_SHM_HW, 0x01EA);
b43legacy_write32(dev, B43legacy_MMIO_SHM_DATA, 0x00004000);
/* No need for autoinc bit in SHM_HW */
b43legacy_shm_control_word(dev, B43legacy_SHM_HW, 0x01EB);
for (i = 0; i < len; i++) {
b43legacy_write32(dev, B43legacy_MMIO_SHM_DATA,
be32_to_cpu(data[i]));
udelay(10);
}
}
b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_REASON,
B43legacy_IRQ_ALL);
/* Start the microcode PSM */
macctl = b43legacy_read32(dev, B43legacy_MMIO_MACCTL);
macctl &= ~B43legacy_MACCTL_PSM_JMP0;
macctl |= B43legacy_MACCTL_PSM_RUN;
b43legacy_write32(dev, B43legacy_MMIO_MACCTL, macctl);
/* Wait for the microcode to load and respond */
i = 0;
while (1) {
tmp = b43legacy_read32(dev, B43legacy_MMIO_GEN_IRQ_REASON);
if (tmp == B43legacy_IRQ_MAC_SUSPENDED)
break;
i++;
if (i >= B43legacy_IRQWAIT_MAX_RETRIES) {
b43legacyerr(dev->wl, "Microcode not responding\n");
b43legacy_print_fw_helptext(dev->wl);
err = -ENODEV;
goto error;
}
msleep_interruptible(50);
if (signal_pending(current)) {
err = -EINTR;
goto error;
}
}
/* dummy read follows */
b43legacy_read32(dev, B43legacy_MMIO_GEN_IRQ_REASON);
/* Get and check the revisions. */
fwrev = b43legacy_shm_read16(dev, B43legacy_SHM_SHARED,
B43legacy_SHM_SH_UCODEREV);
fwpatch = b43legacy_shm_read16(dev, B43legacy_SHM_SHARED,
B43legacy_SHM_SH_UCODEPATCH);
fwdate = b43legacy_shm_read16(dev, B43legacy_SHM_SHARED,
B43legacy_SHM_SH_UCODEDATE);
fwtime = b43legacy_shm_read16(dev, B43legacy_SHM_SHARED,
B43legacy_SHM_SH_UCODETIME);
if (fwrev > 0x128) {
b43legacyerr(dev->wl, "YOU ARE TRYING TO LOAD V4 FIRMWARE."
" Only firmware from binary drivers version 3.x"
" is supported. You must change your firmware"
" files.\n");
b43legacy_print_fw_helptext(dev->wl);
err = -EOPNOTSUPP;
goto error;
}
b43legacyinfo(dev->wl, "Loading firmware version 0x%X, patch level %u "
"(20%.2i-%.2i-%.2i %.2i:%.2i:%.2i)\n", fwrev, fwpatch,
(fwdate >> 12) & 0xF, (fwdate >> 8) & 0xF, fwdate & 0xFF,
(fwtime >> 11) & 0x1F, (fwtime >> 5) & 0x3F,
fwtime & 0x1F);
dev->fw.rev = fwrev;
dev->fw.patch = fwpatch;
snprintf(wiphy->fw_version, sizeof(wiphy->fw_version), "%u.%u",
dev->fw.rev, dev->fw.patch);
wiphy->hw_version = dev->dev->id.coreid;
return 0;
error:
macctl = b43legacy_read32(dev, B43legacy_MMIO_MACCTL);
macctl &= ~B43legacy_MACCTL_PSM_RUN;
macctl |= B43legacy_MACCTL_PSM_JMP0;
b43legacy_write32(dev, B43legacy_MMIO_MACCTL, macctl);
return err;
}
static int b43legacy_write_initvals(struct b43legacy_wldev *dev,
const struct b43legacy_iv *ivals,
size_t count,
size_t array_size)
{
const struct b43legacy_iv *iv;
u16 offset;
size_t i;
bool bit32;
BUILD_BUG_ON(sizeof(struct b43legacy_iv) != 6);
iv = ivals;
for (i = 0; i < count; i++) {
if (array_size < sizeof(iv->offset_size))
goto err_format;
array_size -= sizeof(iv->offset_size);
offset = be16_to_cpu(iv->offset_size);
bit32 = !!(offset & B43legacy_IV_32BIT);
offset &= B43legacy_IV_OFFSET_MASK;
if (offset >= 0x1000)
goto err_format;
if (bit32) {
u32 value;
if (array_size < sizeof(iv->data.d32))
goto err_format;
array_size -= sizeof(iv->data.d32);
value = get_unaligned_be32(&iv->data.d32);
b43legacy_write32(dev, offset, value);
iv = (const struct b43legacy_iv *)((const uint8_t *)iv +
sizeof(__be16) +
sizeof(__be32));
} else {
u16 value;
if (array_size < sizeof(iv->data.d16))
goto err_format;
array_size -= sizeof(iv->data.d16);
value = be16_to_cpu(iv->data.d16);
b43legacy_write16(dev, offset, value);
iv = (const struct b43legacy_iv *)((const uint8_t *)iv +
sizeof(__be16) +
sizeof(__be16));
}
}
if (array_size)
goto err_format;
return 0;
err_format:
b43legacyerr(dev->wl, "Initial Values Firmware file-format error.\n");
b43legacy_print_fw_helptext(dev->wl);
return -EPROTO;
}
static int b43legacy_upload_initvals(struct b43legacy_wldev *dev)
{
const size_t hdr_len = sizeof(struct b43legacy_fw_header);
const struct b43legacy_fw_header *hdr;
struct b43legacy_firmware *fw = &dev->fw;
const struct b43legacy_iv *ivals;
size_t count;
int err;
hdr = (const struct b43legacy_fw_header *)(fw->initvals->data);
ivals = (const struct b43legacy_iv *)(fw->initvals->data + hdr_len);
count = be32_to_cpu(hdr->size);
err = b43legacy_write_initvals(dev, ivals, count,
fw->initvals->size - hdr_len);
if (err)
goto out;
if (fw->initvals_band) {
hdr = (const struct b43legacy_fw_header *)
(fw->initvals_band->data);
ivals = (const struct b43legacy_iv *)(fw->initvals_band->data
+ hdr_len);
count = be32_to_cpu(hdr->size);
err = b43legacy_write_initvals(dev, ivals, count,
fw->initvals_band->size - hdr_len);
if (err)
goto out;
}
out:
return err;
}
/* Initialize the GPIOs
* http://bcm-specs.sipsolutions.net/GPIO
*/
static int b43legacy_gpio_init(struct b43legacy_wldev *dev)
{
struct ssb_bus *bus = dev->dev->bus;
struct ssb_device *gpiodev, *pcidev = NULL;
u32 mask;
u32 set;
b43legacy_write32(dev, B43legacy_MMIO_MACCTL,
b43legacy_read32(dev,
B43legacy_MMIO_MACCTL)
& 0xFFFF3FFF);
b43legacy_write16(dev, B43legacy_MMIO_GPIO_MASK,
b43legacy_read16(dev,
B43legacy_MMIO_GPIO_MASK)
| 0x000F);
mask = 0x0000001F;
set = 0x0000000F;
if (dev->dev->bus->chip_id == 0x4301) {
mask |= 0x0060;
set |= 0x0060;
}
if (dev->dev->bus->sprom.boardflags_lo & B43legacy_BFL_PACTRL) {
b43legacy_write16(dev, B43legacy_MMIO_GPIO_MASK,
b43legacy_read16(dev,
B43legacy_MMIO_GPIO_MASK)
| 0x0200);
mask |= 0x0200;
set |= 0x0200;
}
if (dev->dev->id.revision >= 2)
mask |= 0x0010; /* FIXME: This is redundant. */
#ifdef CONFIG_SSB_DRIVER_PCICORE
pcidev = bus->pcicore.dev;
#endif
gpiodev = bus->chipco.dev ? : pcidev;
if (!gpiodev)
return 0;
ssb_write32(gpiodev, B43legacy_GPIO_CONTROL,
(ssb_read32(gpiodev, B43legacy_GPIO_CONTROL)
& ~mask) | set);
return 0;
}
/* Turn off all GPIO stuff. Call this on module unload, for example. */
static void b43legacy_gpio_cleanup(struct b43legacy_wldev *dev)
{
struct ssb_bus *bus = dev->dev->bus;
struct ssb_device *gpiodev, *pcidev = NULL;
#ifdef CONFIG_SSB_DRIVER_PCICORE
pcidev = bus->pcicore.dev;
#endif
gpiodev = bus->chipco.dev ? : pcidev;
if (!gpiodev)
return;
ssb_write32(gpiodev, B43legacy_GPIO_CONTROL, 0);
}
/* http://bcm-specs.sipsolutions.net/EnableMac */
void b43legacy_mac_enable(struct b43legacy_wldev *dev)
{
dev->mac_suspended--;
B43legacy_WARN_ON(dev->mac_suspended < 0);
B43legacy_WARN_ON(irqs_disabled());
if (dev->mac_suspended == 0) {
b43legacy_write32(dev, B43legacy_MMIO_MACCTL,
b43legacy_read32(dev,
B43legacy_MMIO_MACCTL)
| B43legacy_MACCTL_ENABLED);
b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_REASON,
B43legacy_IRQ_MAC_SUSPENDED);
/* the next two are dummy reads */
b43legacy_read32(dev, B43legacy_MMIO_MACCTL);
b43legacy_read32(dev, B43legacy_MMIO_GEN_IRQ_REASON);
b43legacy_power_saving_ctl_bits(dev, -1, -1);
/* Re-enable IRQs. */
spin_lock_irq(&dev->wl->irq_lock);
b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_MASK,
dev->irq_mask);
spin_unlock_irq(&dev->wl->irq_lock);
}
}
/* http://bcm-specs.sipsolutions.net/SuspendMAC */
void b43legacy_mac_suspend(struct b43legacy_wldev *dev)
{
int i;
u32 tmp;
might_sleep();
B43legacy_WARN_ON(irqs_disabled());
B43legacy_WARN_ON(dev->mac_suspended < 0);
if (dev->mac_suspended == 0) {
/* Mask IRQs before suspending MAC. Otherwise
* the MAC stays busy and won't suspend. */
spin_lock_irq(&dev->wl->irq_lock);
b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_MASK, 0);
spin_unlock_irq(&dev->wl->irq_lock);
b43legacy_synchronize_irq(dev);
b43legacy_power_saving_ctl_bits(dev, -1, 1);
b43legacy_write32(dev, B43legacy_MMIO_MACCTL,
b43legacy_read32(dev,
B43legacy_MMIO_MACCTL)
& ~B43legacy_MACCTL_ENABLED);
b43legacy_read32(dev, B43legacy_MMIO_GEN_IRQ_REASON);
for (i = 40; i; i--) {
tmp = b43legacy_read32(dev,
B43legacy_MMIO_GEN_IRQ_REASON);
if (tmp & B43legacy_IRQ_MAC_SUSPENDED)
goto out;
msleep(1);
}
b43legacyerr(dev->wl, "MAC suspend failed\n");
}
out:
dev->mac_suspended++;
}
static void b43legacy_adjust_opmode(struct b43legacy_wldev *dev)
{
struct b43legacy_wl *wl = dev->wl;
u32 ctl;
u16 cfp_pretbtt;
ctl = b43legacy_read32(dev, B43legacy_MMIO_MACCTL);
/* Reset status to STA infrastructure mode. */
ctl &= ~B43legacy_MACCTL_AP;
ctl &= ~B43legacy_MACCTL_KEEP_CTL;
ctl &= ~B43legacy_MACCTL_KEEP_BADPLCP;
ctl &= ~B43legacy_MACCTL_KEEP_BAD;
ctl &= ~B43legacy_MACCTL_PROMISC;
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
ctl &= ~B43legacy_MACCTL_BEACPROMISC;
ctl |= B43legacy_MACCTL_INFRA;
if (b43legacy_is_mode(wl, NL80211_IFTYPE_AP))
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
ctl |= B43legacy_MACCTL_AP;
else if (b43legacy_is_mode(wl, NL80211_IFTYPE_ADHOC))
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
ctl &= ~B43legacy_MACCTL_INFRA;
if (wl->filter_flags & FIF_CONTROL)
ctl |= B43legacy_MACCTL_KEEP_CTL;
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
if (wl->filter_flags & FIF_FCSFAIL)
ctl |= B43legacy_MACCTL_KEEP_BAD;
if (wl->filter_flags & FIF_PLCPFAIL)
ctl |= B43legacy_MACCTL_KEEP_BADPLCP;
if (wl->filter_flags & FIF_PROMISC_IN_BSS)
ctl |= B43legacy_MACCTL_PROMISC;
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
if (wl->filter_flags & FIF_BCN_PRBRESP_PROMISC)
ctl |= B43legacy_MACCTL_BEACPROMISC;
/* Workaround: On old hardware the HW-MAC-address-filter
* doesn't work properly, so always run promisc in filter
* it in software. */
if (dev->dev->id.revision <= 4)
ctl |= B43legacy_MACCTL_PROMISC;
b43legacy_write32(dev, B43legacy_MMIO_MACCTL, ctl);
cfp_pretbtt = 2;
if ((ctl & B43legacy_MACCTL_INFRA) &&
!(ctl & B43legacy_MACCTL_AP)) {
if (dev->dev->bus->chip_id == 0x4306 &&
dev->dev->bus->chip_rev == 3)
cfp_pretbtt = 100;
else
cfp_pretbtt = 50;
}
b43legacy_write16(dev, 0x612, cfp_pretbtt);
}
static void b43legacy_rate_memory_write(struct b43legacy_wldev *dev,
u16 rate,
int is_ofdm)
{
u16 offset;
if (is_ofdm) {
offset = 0x480;
offset += (b43legacy_plcp_get_ratecode_ofdm(rate) & 0x000F) * 2;
} else {
offset = 0x4C0;
offset += (b43legacy_plcp_get_ratecode_cck(rate) & 0x000F) * 2;
}
b43legacy_shm_write16(dev, B43legacy_SHM_SHARED, offset + 0x20,
b43legacy_shm_read16(dev,
B43legacy_SHM_SHARED, offset));
}
static void b43legacy_rate_memory_init(struct b43legacy_wldev *dev)
{
switch (dev->phy.type) {
case B43legacy_PHYTYPE_G:
b43legacy_rate_memory_write(dev, B43legacy_OFDM_RATE_6MB, 1);
b43legacy_rate_memory_write(dev, B43legacy_OFDM_RATE_12MB, 1);
b43legacy_rate_memory_write(dev, B43legacy_OFDM_RATE_18MB, 1);
b43legacy_rate_memory_write(dev, B43legacy_OFDM_RATE_24MB, 1);
b43legacy_rate_memory_write(dev, B43legacy_OFDM_RATE_36MB, 1);
b43legacy_rate_memory_write(dev, B43legacy_OFDM_RATE_48MB, 1);
b43legacy_rate_memory_write(dev, B43legacy_OFDM_RATE_54MB, 1);
/* fallthrough */
case B43legacy_PHYTYPE_B:
b43legacy_rate_memory_write(dev, B43legacy_CCK_RATE_1MB, 0);
b43legacy_rate_memory_write(dev, B43legacy_CCK_RATE_2MB, 0);
b43legacy_rate_memory_write(dev, B43legacy_CCK_RATE_5MB, 0);
b43legacy_rate_memory_write(dev, B43legacy_CCK_RATE_11MB, 0);
break;
default:
B43legacy_BUG_ON(1);
}
}
/* Set the TX-Antenna for management frames sent by firmware. */
static void b43legacy_mgmtframe_txantenna(struct b43legacy_wldev *dev,
int antenna)
{
u16 ant = 0;
u16 tmp;
switch (antenna) {
case B43legacy_ANTENNA0:
ant |= B43legacy_TX4_PHY_ANT0;
break;
case B43legacy_ANTENNA1:
ant |= B43legacy_TX4_PHY_ANT1;
break;
case B43legacy_ANTENNA_AUTO:
ant |= B43legacy_TX4_PHY_ANTLAST;
break;
default:
B43legacy_BUG_ON(1);
}
/* FIXME We also need to set the other flags of the PHY control
* field somewhere. */
/* For Beacons */
tmp = b43legacy_shm_read16(dev, B43legacy_SHM_SHARED,
B43legacy_SHM_SH_BEACPHYCTL);
tmp = (tmp & ~B43legacy_TX4_PHY_ANT) | ant;
b43legacy_shm_write16(dev, B43legacy_SHM_SHARED,
B43legacy_SHM_SH_BEACPHYCTL, tmp);
/* For ACK/CTS */
tmp = b43legacy_shm_read16(dev, B43legacy_SHM_SHARED,
B43legacy_SHM_SH_ACKCTSPHYCTL);
tmp = (tmp & ~B43legacy_TX4_PHY_ANT) | ant;
b43legacy_shm_write16(dev, B43legacy_SHM_SHARED,
B43legacy_SHM_SH_ACKCTSPHYCTL, tmp);
/* For Probe Resposes */
tmp = b43legacy_shm_read16(dev, B43legacy_SHM_SHARED,
B43legacy_SHM_SH_PRPHYCTL);
tmp = (tmp & ~B43legacy_TX4_PHY_ANT) | ant;
b43legacy_shm_write16(dev, B43legacy_SHM_SHARED,
B43legacy_SHM_SH_PRPHYCTL, tmp);
}
/* This is the opposite of b43legacy_chip_init() */
static void b43legacy_chip_exit(struct b43legacy_wldev *dev)
{
b43legacy_radio_turn_off(dev, 1);
b43legacy_gpio_cleanup(dev);
/* firmware is released later */
}
/* Initialize the chip
* http://bcm-specs.sipsolutions.net/ChipInit
*/
static int b43legacy_chip_init(struct b43legacy_wldev *dev)
{
struct b43legacy_phy *phy = &dev->phy;
int err;
int tmp;
u32 value32, macctl;
u16 value16;
/* Initialize the MAC control */
macctl = B43legacy_MACCTL_IHR_ENABLED | B43legacy_MACCTL_SHM_ENABLED;
if (dev->phy.gmode)
macctl |= B43legacy_MACCTL_GMODE;
macctl |= B43legacy_MACCTL_INFRA;
b43legacy_write32(dev, B43legacy_MMIO_MACCTL, macctl);
err = b43legacy_upload_microcode(dev);
if (err)
goto out; /* firmware is released later */
err = b43legacy_gpio_init(dev);
if (err)
goto out; /* firmware is released later */
err = b43legacy_upload_initvals(dev);
if (err)
goto err_gpio_clean;
b43legacy_radio_turn_on(dev);
b43legacy_write16(dev, 0x03E6, 0x0000);
err = b43legacy_phy_init(dev);
if (err)
goto err_radio_off;
/* Select initial Interference Mitigation. */
tmp = phy->interfmode;
phy->interfmode = B43legacy_INTERFMODE_NONE;
b43legacy_radio_set_interference_mitigation(dev, tmp);
b43legacy_phy_set_antenna_diversity(dev);
b43legacy_mgmtframe_txantenna(dev, B43legacy_ANTENNA_DEFAULT);
if (phy->type == B43legacy_PHYTYPE_B) {
value16 = b43legacy_read16(dev, 0x005E);
value16 |= 0x0004;
b43legacy_write16(dev, 0x005E, value16);
}
b43legacy_write32(dev, 0x0100, 0x01000000);
if (dev->dev->id.revision < 5)
b43legacy_write32(dev, 0x010C, 0x01000000);
value32 = b43legacy_read32(dev, B43legacy_MMIO_MACCTL);
value32 &= ~B43legacy_MACCTL_INFRA;
b43legacy_write32(dev, B43legacy_MMIO_MACCTL, value32);
value32 = b43legacy_read32(dev, B43legacy_MMIO_MACCTL);
value32 |= B43legacy_MACCTL_INFRA;
b43legacy_write32(dev, B43legacy_MMIO_MACCTL, value32);
if (b43legacy_using_pio(dev)) {
b43legacy_write32(dev, 0x0210, 0x00000100);
b43legacy_write32(dev, 0x0230, 0x00000100);
b43legacy_write32(dev, 0x0250, 0x00000100);
b43legacy_write32(dev, 0x0270, 0x00000100);
b43legacy_shm_write16(dev, B43legacy_SHM_SHARED, 0x0034,
0x0000);
}
/* Probe Response Timeout value */
/* FIXME: Default to 0, has to be set by ioctl probably... :-/ */
b43legacy_shm_write16(dev, B43legacy_SHM_SHARED, 0x0074, 0x0000);
/* Initially set the wireless operation mode. */
b43legacy_adjust_opmode(dev);
if (dev->dev->id.revision < 3) {
b43legacy_write16(dev, 0x060E, 0x0000);
b43legacy_write16(dev, 0x0610, 0x8000);
b43legacy_write16(dev, 0x0604, 0x0000);
b43legacy_write16(dev, 0x0606, 0x0200);
} else {
b43legacy_write32(dev, 0x0188, 0x80000000);
b43legacy_write32(dev, 0x018C, 0x02000000);
}
b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_REASON, 0x00004000);
b43legacy_write32(dev, B43legacy_MMIO_DMA0_IRQ_MASK, 0x0001DC00);
b43legacy_write32(dev, B43legacy_MMIO_DMA1_IRQ_MASK, 0x0000DC00);
b43legacy_write32(dev, B43legacy_MMIO_DMA2_IRQ_MASK, 0x0000DC00);
b43legacy_write32(dev, B43legacy_MMIO_DMA3_IRQ_MASK, 0x0001DC00);
b43legacy_write32(dev, B43legacy_MMIO_DMA4_IRQ_MASK, 0x0000DC00);
b43legacy_write32(dev, B43legacy_MMIO_DMA5_IRQ_MASK, 0x0000DC00);
value32 = ssb_read32(dev->dev, SSB_TMSLOW);
value32 |= B43legacy_TMSLOW_MACPHYCLKEN;
ssb_write32(dev->dev, SSB_TMSLOW, value32);
b43legacy_write16(dev, B43legacy_MMIO_POWERUP_DELAY,
dev->dev->bus->chipco.fast_pwrup_delay);
/* PHY TX errors counter. */
atomic_set(&phy->txerr_cnt, B43legacy_PHY_TX_BADNESS_LIMIT);
B43legacy_WARN_ON(err != 0);
b43legacydbg(dev->wl, "Chip initialized\n");
out:
return err;
err_radio_off:
b43legacy_radio_turn_off(dev, 1);
err_gpio_clean:
b43legacy_gpio_cleanup(dev);
goto out;
}
static void b43legacy_periodic_every120sec(struct b43legacy_wldev *dev)
{
struct b43legacy_phy *phy = &dev->phy;
if (phy->type != B43legacy_PHYTYPE_G || phy->rev < 2)
return;
b43legacy_mac_suspend(dev);
b43legacy_phy_lo_g_measure(dev);
b43legacy_mac_enable(dev);
}
static void b43legacy_periodic_every60sec(struct b43legacy_wldev *dev)
{
b43legacy_phy_lo_mark_all_unused(dev);
if (dev->dev->bus->sprom.boardflags_lo & B43legacy_BFL_RSSI) {
b43legacy_mac_suspend(dev);
b43legacy_calc_nrssi_slope(dev);
b43legacy_mac_enable(dev);
}
}
static void b43legacy_periodic_every30sec(struct b43legacy_wldev *dev)
{
/* Update device statistics. */
b43legacy_calculate_link_quality(dev);
}
static void b43legacy_periodic_every15sec(struct b43legacy_wldev *dev)
{
b43legacy_phy_xmitpower(dev); /* FIXME: unless scanning? */
atomic_set(&dev->phy.txerr_cnt, B43legacy_PHY_TX_BADNESS_LIMIT);
wmb();
}
static void do_periodic_work(struct b43legacy_wldev *dev)
{
unsigned int state;
state = dev->periodic_state;
if (state % 8 == 0)
b43legacy_periodic_every120sec(dev);
if (state % 4 == 0)
b43legacy_periodic_every60sec(dev);
if (state % 2 == 0)
b43legacy_periodic_every30sec(dev);
b43legacy_periodic_every15sec(dev);
}
/* Periodic work locking policy:
* The whole periodic work handler is protected by
* wl->mutex. If another lock is needed somewhere in the
* pwork callchain, it's acquired in-place, where it's needed.
*/
static void b43legacy_periodic_work_handler(struct work_struct *work)
{
struct b43legacy_wldev *dev = container_of(work, struct b43legacy_wldev,
periodic_work.work);
struct b43legacy_wl *wl = dev->wl;
unsigned long delay;
mutex_lock(&wl->mutex);
if (unlikely(b43legacy_status(dev) != B43legacy_STAT_STARTED))
goto out;
if (b43legacy_debug(dev, B43legacy_DBG_PWORK_STOP))
goto out_requeue;
do_periodic_work(dev);
dev->periodic_state++;
out_requeue:
if (b43legacy_debug(dev, B43legacy_DBG_PWORK_FAST))
delay = msecs_to_jiffies(50);
else
delay = round_jiffies_relative(HZ * 15);
ieee80211_queue_delayed_work(wl->hw, &dev->periodic_work, delay);
out:
mutex_unlock(&wl->mutex);
}
static void b43legacy_periodic_tasks_setup(struct b43legacy_wldev *dev)
{
struct delayed_work *work = &dev->periodic_work;
dev->periodic_state = 0;
INIT_DELAYED_WORK(work, b43legacy_periodic_work_handler);
ieee80211_queue_delayed_work(dev->wl->hw, work, 0);
}
/* Validate access to the chip (SHM) */
static int b43legacy_validate_chipaccess(struct b43legacy_wldev *dev)
{
u32 value;
u32 shm_backup;
shm_backup = b43legacy_shm_read32(dev, B43legacy_SHM_SHARED, 0);
b43legacy_shm_write32(dev, B43legacy_SHM_SHARED, 0, 0xAA5555AA);
if (b43legacy_shm_read32(dev, B43legacy_SHM_SHARED, 0) !=
0xAA5555AA)
goto error;
b43legacy_shm_write32(dev, B43legacy_SHM_SHARED, 0, 0x55AAAA55);
if (b43legacy_shm_read32(dev, B43legacy_SHM_SHARED, 0) !=
0x55AAAA55)
goto error;
b43legacy_shm_write32(dev, B43legacy_SHM_SHARED, 0, shm_backup);
value = b43legacy_read32(dev, B43legacy_MMIO_MACCTL);
if ((value | B43legacy_MACCTL_GMODE) !=
(B43legacy_MACCTL_GMODE | B43legacy_MACCTL_IHR_ENABLED))
goto error;
value = b43legacy_read32(dev, B43legacy_MMIO_GEN_IRQ_REASON);
if (value)
goto error;
return 0;
error:
b43legacyerr(dev->wl, "Failed to validate the chipaccess\n");
return -ENODEV;
}
static void b43legacy_security_init(struct b43legacy_wldev *dev)
{
dev->max_nr_keys = (dev->dev->id.revision >= 5) ? 58 : 20;
B43legacy_WARN_ON(dev->max_nr_keys > ARRAY_SIZE(dev->key));
dev->ktp = b43legacy_shm_read16(dev, B43legacy_SHM_SHARED,
0x0056);
/* KTP is a word address, but we address SHM bytewise.
* So multiply by two.
*/
dev->ktp *= 2;
if (dev->dev->id.revision >= 5)
/* Number of RCMTA address slots */
b43legacy_write16(dev, B43legacy_MMIO_RCMTA_COUNT,
dev->max_nr_keys - 8);
}
#ifdef CONFIG_B43LEGACY_HWRNG
static int b43legacy_rng_read(struct hwrng *rng, u32 *data)
{
struct b43legacy_wl *wl = (struct b43legacy_wl *)rng->priv;
unsigned long flags;
/* Don't take wl->mutex here, as it could deadlock with
* hwrng internal locking. It's not needed to take
* wl->mutex here, anyway. */
spin_lock_irqsave(&wl->irq_lock, flags);
*data = b43legacy_read16(wl->current_dev, B43legacy_MMIO_RNG);
spin_unlock_irqrestore(&wl->irq_lock, flags);
return (sizeof(u16));
}
#endif
static void b43legacy_rng_exit(struct b43legacy_wl *wl)
{
#ifdef CONFIG_B43LEGACY_HWRNG
if (wl->rng_initialized)
hwrng_unregister(&wl->rng);
#endif
}
static int b43legacy_rng_init(struct b43legacy_wl *wl)
{
int err = 0;
#ifdef CONFIG_B43LEGACY_HWRNG
snprintf(wl->rng_name, ARRAY_SIZE(wl->rng_name),
"%s_%s", KBUILD_MODNAME, wiphy_name(wl->hw->wiphy));
wl->rng.name = wl->rng_name;
wl->rng.data_read = b43legacy_rng_read;
wl->rng.priv = (unsigned long)wl;
wl->rng_initialized = 1;
err = hwrng_register(&wl->rng);
if (err) {
wl->rng_initialized = 0;
b43legacyerr(wl, "Failed to register the random "
"number generator (%d)\n", err);
}
#endif
return err;
}
static void b43legacy_tx_work(struct work_struct *work)
{
struct b43legacy_wl *wl = container_of(work, struct b43legacy_wl,
tx_work);
struct b43legacy_wldev *dev;
struct sk_buff *skb;
int queue_num;
int err = 0;
mutex_lock(&wl->mutex);
dev = wl->current_dev;
if (unlikely(!dev || b43legacy_status(dev) < B43legacy_STAT_STARTED)) {
mutex_unlock(&wl->mutex);
return;
}
for (queue_num = 0; queue_num < B43legacy_QOS_QUEUE_NUM; queue_num++) {
while (skb_queue_len(&wl->tx_queue[queue_num])) {
skb = skb_dequeue(&wl->tx_queue[queue_num]);
if (b43legacy_using_pio(dev))
err = b43legacy_pio_tx(dev, skb);
else
err = b43legacy_dma_tx(dev, skb);
if (err == -ENOSPC) {
wl->tx_queue_stopped[queue_num] = 1;
ieee80211_stop_queue(wl->hw, queue_num);
skb_queue_head(&wl->tx_queue[queue_num], skb);
break;
}
if (unlikely(err))
dev_kfree_skb(skb); /* Drop it */
err = 0;
}
if (!err)
wl->tx_queue_stopped[queue_num] = 0;
}
mutex_unlock(&wl->mutex);
}
static void b43legacy_op_tx(struct ieee80211_hw *hw,
struct ieee80211_tx_control *control,
struct sk_buff *skb)
{
struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw);
if (unlikely(skb->len < 2 + 2 + 6)) {
/* Too short, this can't be a valid frame. */
dev_kfree_skb_any(skb);
return;
}
B43legacy_WARN_ON(skb_shinfo(skb)->nr_frags);
skb_queue_tail(&wl->tx_queue[skb->queue_mapping], skb);
if (!wl->tx_queue_stopped[skb->queue_mapping])
ieee80211_queue_work(wl->hw, &wl->tx_work);
else
ieee80211_stop_queue(wl->hw, skb->queue_mapping);
}
static int b43legacy_op_conf_tx(struct ieee80211_hw *hw,
struct ieee80211_vif *vif, u16 queue,
const struct ieee80211_tx_queue_params *params)
{
return 0;
}
static int b43legacy_op_get_stats(struct ieee80211_hw *hw,
struct ieee80211_low_level_stats *stats)
{
struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw);
unsigned long flags;
spin_lock_irqsave(&wl->irq_lock, flags);
memcpy(stats, &wl->ieee_stats, sizeof(*stats));
spin_unlock_irqrestore(&wl->irq_lock, flags);
return 0;
}
static const char *phymode_to_string(unsigned int phymode)
{
switch (phymode) {
case B43legacy_PHYMODE_B:
return "B";
case B43legacy_PHYMODE_G:
return "G";
default:
B43legacy_BUG_ON(1);
}
return "";
}
static int find_wldev_for_phymode(struct b43legacy_wl *wl,
unsigned int phymode,
struct b43legacy_wldev **dev,
bool *gmode)
{
struct b43legacy_wldev *d;
list_for_each_entry(d, &wl->devlist, list) {
if (d->phy.possible_phymodes & phymode) {
/* Ok, this device supports the PHY-mode.
* Set the gmode bit. */
*gmode = true;
*dev = d;
return 0;
}
}
return -ESRCH;
}
static void b43legacy_put_phy_into_reset(struct b43legacy_wldev *dev)
{
struct ssb_device *sdev = dev->dev;
u32 tmslow;
tmslow = ssb_read32(sdev, SSB_TMSLOW);
tmslow &= ~B43legacy_TMSLOW_GMODE;
tmslow |= B43legacy_TMSLOW_PHYRESET;
tmslow |= SSB_TMSLOW_FGC;
ssb_write32(sdev, SSB_TMSLOW, tmslow);
msleep(1);
tmslow = ssb_read32(sdev, SSB_TMSLOW);
tmslow &= ~SSB_TMSLOW_FGC;
tmslow |= B43legacy_TMSLOW_PHYRESET;
ssb_write32(sdev, SSB_TMSLOW, tmslow);
msleep(1);
}
/* Expects wl->mutex locked */
static int b43legacy_switch_phymode(struct b43legacy_wl *wl,
unsigned int new_mode)
{
struct b43legacy_wldev *uninitialized_var(up_dev);
struct b43legacy_wldev *down_dev;
int err;
bool gmode = false;
int prev_status;
err = find_wldev_for_phymode(wl, new_mode, &up_dev, &gmode);
if (err) {
b43legacyerr(wl, "Could not find a device for %s-PHY mode\n",
phymode_to_string(new_mode));
return err;
}
if ((up_dev == wl->current_dev) &&
(!!wl->current_dev->phy.gmode == !!gmode))
/* This device is already running. */
return 0;
b43legacydbg(wl, "Reconfiguring PHYmode to %s-PHY\n",
phymode_to_string(new_mode));
down_dev = wl->current_dev;
prev_status = b43legacy_status(down_dev);
/* Shutdown the currently running core. */
if (prev_status >= B43legacy_STAT_STARTED)
b43legacy_wireless_core_stop(down_dev);
if (prev_status >= B43legacy_STAT_INITIALIZED)
b43legacy_wireless_core_exit(down_dev);
if (down_dev != up_dev)
/* We switch to a different core, so we put PHY into
* RESET on the old core. */
b43legacy_put_phy_into_reset(down_dev);
/* Now start the new core. */
up_dev->phy.gmode = gmode;
if (prev_status >= B43legacy_STAT_INITIALIZED) {
err = b43legacy_wireless_core_init(up_dev);
if (err) {
b43legacyerr(wl, "Fatal: Could not initialize device"
" for newly selected %s-PHY mode\n",
phymode_to_string(new_mode));
goto init_failure;
}
}
if (prev_status >= B43legacy_STAT_STARTED) {
err = b43legacy_wireless_core_start(up_dev);
if (err) {
b43legacyerr(wl, "Fatal: Could not start device for "
"newly selected %s-PHY mode\n",
phymode_to_string(new_mode));
b43legacy_wireless_core_exit(up_dev);
goto init_failure;
}
}
B43legacy_WARN_ON(b43legacy_status(up_dev) != prev_status);
b43legacy_shm_write32(up_dev, B43legacy_SHM_SHARED, 0x003E, 0);
wl->current_dev = up_dev;
return 0;
init_failure:
/* Whoops, failed to init the new core. No core is operating now. */
wl->current_dev = NULL;
return err;
}
/* Write the short and long frame retry limit values. */
static void b43legacy_set_retry_limits(struct b43legacy_wldev *dev,
unsigned int short_retry,
unsigned int long_retry)
{
/* The retry limit is a 4-bit counter. Enforce this to avoid overflowing
* the chip-internal counter. */
short_retry = min(short_retry, (unsigned int)0xF);
long_retry = min(long_retry, (unsigned int)0xF);
b43legacy_shm_write16(dev, B43legacy_SHM_WIRELESS, 0x0006, short_retry);
b43legacy_shm_write16(dev, B43legacy_SHM_WIRELESS, 0x0007, long_retry);
}
static int b43legacy_op_dev_config(struct ieee80211_hw *hw,
u32 changed)
{
struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw);
struct b43legacy_wldev *dev;
struct b43legacy_phy *phy;
struct ieee80211_conf *conf = &hw->conf;
unsigned long flags;
unsigned int new_phymode = 0xFFFF;
int antenna_tx;
int err = 0;
antenna_tx = B43legacy_ANTENNA_DEFAULT;
mutex_lock(&wl->mutex);
dev = wl->current_dev;
phy = &dev->phy;
if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
b43legacy_set_retry_limits(dev,
conf->short_frame_max_tx_count,
conf->long_frame_max_tx_count);
changed &= ~IEEE80211_CONF_CHANGE_RETRY_LIMITS;
if (!changed)
goto out_unlock_mutex;
/* Switch the PHY mode (if necessary). */
switch (conf->channel->band) {
case IEEE80211_BAND_2GHZ:
if (phy->type == B43legacy_PHYTYPE_B)
new_phymode = B43legacy_PHYMODE_B;
else
new_phymode = B43legacy_PHYMODE_G;
break;
default:
B43legacy_WARN_ON(1);
}
err = b43legacy_switch_phymode(wl, new_phymode);
if (err)
goto out_unlock_mutex;
/* Disable IRQs while reconfiguring the device.
* This makes it possible to drop the spinlock throughout
* the reconfiguration process. */
spin_lock_irqsave(&wl->irq_lock, flags);
if (b43legacy_status(dev) < B43legacy_STAT_STARTED) {
spin_unlock_irqrestore(&wl->irq_lock, flags);
goto out_unlock_mutex;
}
b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_MASK, 0);
spin_unlock_irqrestore(&wl->irq_lock, flags);
b43legacy_synchronize_irq(dev);
/* Switch to the requested channel.
* The firmware takes care of races with the TX handler. */
if (conf->channel->hw_value != phy->channel)
b43legacy_radio_selectchannel(dev, conf->channel->hw_value, 0);
dev->wl->radiotap_enabled = !!(conf->flags & IEEE80211_CONF_MONITOR);
/* Adjust the desired TX power level. */
if (conf->power_level != 0) {
if (conf->power_level != phy->power_level) {
phy->power_level = conf->power_level;
b43legacy_phy_xmitpower(dev);
}
}
/* Antennas for RX and management frame TX. */
b43legacy_mgmtframe_txantenna(dev, antenna_tx);
if (wl->radio_enabled != phy->radio_on) {
if (wl->radio_enabled) {
b43legacy_radio_turn_on(dev);
b43legacyinfo(dev->wl, "Radio turned on by software\n");
if (!dev->radio_hw_enable)
b43legacyinfo(dev->wl, "The hardware RF-kill"
" button still turns the radio"
" physically off. Press the"
" button to turn it on.\n");
} else {
b43legacy_radio_turn_off(dev, 0);
b43legacyinfo(dev->wl, "Radio turned off by"
" software\n");
}
}
spin_lock_irqsave(&wl->irq_lock, flags);
b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_MASK, dev->irq_mask);
mmiowb();
spin_unlock_irqrestore(&wl->irq_lock, flags);
out_unlock_mutex:
mutex_unlock(&wl->mutex);
return err;
}
static void b43legacy_update_basic_rates(struct b43legacy_wldev *dev, u32 brates)
{
struct ieee80211_supported_band *sband =
dev->wl->hw->wiphy->bands[IEEE80211_BAND_2GHZ];
struct ieee80211_rate *rate;
int i;
u16 basic, direct, offset, basic_offset, rateptr;
for (i = 0; i < sband->n_bitrates; i++) {
rate = &sband->bitrates[i];
if (b43legacy_is_cck_rate(rate->hw_value)) {
direct = B43legacy_SHM_SH_CCKDIRECT;
basic = B43legacy_SHM_SH_CCKBASIC;
offset = b43legacy_plcp_get_ratecode_cck(rate->hw_value);
offset &= 0xF;
} else {
direct = B43legacy_SHM_SH_OFDMDIRECT;
basic = B43legacy_SHM_SH_OFDMBASIC;
offset = b43legacy_plcp_get_ratecode_ofdm(rate->hw_value);
offset &= 0xF;
}
rate = ieee80211_get_response_rate(sband, brates, rate->bitrate);
if (b43legacy_is_cck_rate(rate->hw_value)) {
basic_offset = b43legacy_plcp_get_ratecode_cck(rate->hw_value);
basic_offset &= 0xF;
} else {
basic_offset = b43legacy_plcp_get_ratecode_ofdm(rate->hw_value);
basic_offset &= 0xF;
}
/*
* Get the pointer that we need to point to
* from the direct map
*/
rateptr = b43legacy_shm_read16(dev, B43legacy_SHM_SHARED,
direct + 2 * basic_offset);
/* and write it to the basic map */
b43legacy_shm_write16(dev, B43legacy_SHM_SHARED,
basic + 2 * offset, rateptr);
}
}
static void b43legacy_op_bss_info_changed(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_bss_conf *conf,
u32 changed)
{
struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw);
struct b43legacy_wldev *dev;
unsigned long flags;
mutex_lock(&wl->mutex);
B43legacy_WARN_ON(wl->vif != vif);
dev = wl->current_dev;
/* Disable IRQs while reconfiguring the device.
* This makes it possible to drop the spinlock throughout
* the reconfiguration process. */
spin_lock_irqsave(&wl->irq_lock, flags);
if (b43legacy_status(dev) < B43legacy_STAT_STARTED) {
spin_unlock_irqrestore(&wl->irq_lock, flags);
goto out_unlock_mutex;
}
b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_MASK, 0);
if (changed & BSS_CHANGED_BSSID) {
b43legacy_synchronize_irq(dev);
if (conf->bssid)
memcpy(wl->bssid, conf->bssid, ETH_ALEN);
else
memset(wl->bssid, 0, ETH_ALEN);
}
if (b43legacy_status(dev) >= B43legacy_STAT_INITIALIZED) {
if (changed & BSS_CHANGED_BEACON &&
(b43legacy_is_mode(wl, NL80211_IFTYPE_AP) ||
b43legacy_is_mode(wl, NL80211_IFTYPE_ADHOC)))
b43legacy_update_templates(wl);
if (changed & BSS_CHANGED_BSSID)
b43legacy_write_mac_bssid_templates(dev);
}
spin_unlock_irqrestore(&wl->irq_lock, flags);
b43legacy_mac_suspend(dev);
if (changed & BSS_CHANGED_BEACON_INT &&
(b43legacy_is_mode(wl, NL80211_IFTYPE_AP) ||
b43legacy_is_mode(wl, NL80211_IFTYPE_ADHOC)))
b43legacy_set_beacon_int(dev, conf->beacon_int);
if (changed & BSS_CHANGED_BASIC_RATES)
b43legacy_update_basic_rates(dev, conf->basic_rates);
if (changed & BSS_CHANGED_ERP_SLOT) {
if (conf->use_short_slot)
b43legacy_short_slot_timing_enable(dev);
else
b43legacy_short_slot_timing_disable(dev);
}
b43legacy_mac_enable(dev);
spin_lock_irqsave(&wl->irq_lock, flags);
b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_MASK, dev->irq_mask);
/* XXX: why? */
mmiowb();
spin_unlock_irqrestore(&wl->irq_lock, flags);
out_unlock_mutex:
mutex_unlock(&wl->mutex);
}
static void b43legacy_op_configure_filter(struct ieee80211_hw *hw,
unsigned int changed,
unsigned int *fflags,u64 multicast)
{
struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw);
struct b43legacy_wldev *dev = wl->current_dev;
unsigned long flags;
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
if (!dev) {
*fflags = 0;
return;
}
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
spin_lock_irqsave(&wl->irq_lock, flags);
*fflags &= FIF_PROMISC_IN_BSS |
FIF_ALLMULTI |
FIF_FCSFAIL |
FIF_PLCPFAIL |
FIF_CONTROL |
FIF_OTHER_BSS |
FIF_BCN_PRBRESP_PROMISC;
changed &= FIF_PROMISC_IN_BSS |
FIF_ALLMULTI |
FIF_FCSFAIL |
FIF_PLCPFAIL |
FIF_CONTROL |
FIF_OTHER_BSS |
FIF_BCN_PRBRESP_PROMISC;
wl->filter_flags = *fflags;
if (changed && b43legacy_status(dev) >= B43legacy_STAT_INITIALIZED)
b43legacy_adjust_opmode(dev);
spin_unlock_irqrestore(&wl->irq_lock, flags);
}
/* Locking: wl->mutex */
static void b43legacy_wireless_core_stop(struct b43legacy_wldev *dev)
{
struct b43legacy_wl *wl = dev->wl;
unsigned long flags;
int queue_num;
if (b43legacy_status(dev) < B43legacy_STAT_STARTED)
return;
/* Disable and sync interrupts. We must do this before than
* setting the status to INITIALIZED, as the interrupt handler
* won't care about IRQs then. */
spin_lock_irqsave(&wl->irq_lock, flags);
b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_MASK, 0);
b43legacy_read32(dev, B43legacy_MMIO_GEN_IRQ_MASK); /* flush */
spin_unlock_irqrestore(&wl->irq_lock, flags);
b43legacy_synchronize_irq(dev);
b43legacy_set_status(dev, B43legacy_STAT_INITIALIZED);
mutex_unlock(&wl->mutex);
/* Must unlock as it would otherwise deadlock. No races here.
* Cancel the possibly running self-rearming periodic work. */
cancel_delayed_work_sync(&dev->periodic_work);
cancel_work_sync(&wl->tx_work);
mutex_lock(&wl->mutex);
/* Drain all TX queues. */
for (queue_num = 0; queue_num < B43legacy_QOS_QUEUE_NUM; queue_num++) {
while (skb_queue_len(&wl->tx_queue[queue_num]))
dev_kfree_skb(skb_dequeue(&wl->tx_queue[queue_num]));
}
b43legacy_mac_suspend(dev);
free_irq(dev->dev->irq, dev);
b43legacydbg(wl, "Wireless interface stopped\n");
}
/* Locking: wl->mutex */
static int b43legacy_wireless_core_start(struct b43legacy_wldev *dev)
{
int err;
B43legacy_WARN_ON(b43legacy_status(dev) != B43legacy_STAT_INITIALIZED);
drain_txstatus_queue(dev);
err = request_irq(dev->dev->irq, b43legacy_interrupt_handler,
IRQF_SHARED, KBUILD_MODNAME, dev);
if (err) {
b43legacyerr(dev->wl, "Cannot request IRQ-%d\n",
dev->dev->irq);
goto out;
}
/* We are ready to run. */
ieee80211_wake_queues(dev->wl->hw);
b43legacy_set_status(dev, B43legacy_STAT_STARTED);
/* Start data flow (TX/RX) */
b43legacy_mac_enable(dev);
b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_MASK, dev->irq_mask);
/* Start maintenance work */
b43legacy_periodic_tasks_setup(dev);
b43legacydbg(dev->wl, "Wireless interface started\n");
out:
return err;
}
/* Get PHY and RADIO versioning numbers */
static int b43legacy_phy_versioning(struct b43legacy_wldev *dev)
{
struct b43legacy_phy *phy = &dev->phy;
u32 tmp;
u8 analog_type;
u8 phy_type;
u8 phy_rev;
u16 radio_manuf;
u16 radio_ver;
u16 radio_rev;
int unsupported = 0;
/* Get PHY versioning */
tmp = b43legacy_read16(dev, B43legacy_MMIO_PHY_VER);
analog_type = (tmp & B43legacy_PHYVER_ANALOG)
>> B43legacy_PHYVER_ANALOG_SHIFT;
phy_type = (tmp & B43legacy_PHYVER_TYPE) >> B43legacy_PHYVER_TYPE_SHIFT;
phy_rev = (tmp & B43legacy_PHYVER_VERSION);
switch (phy_type) {
case B43legacy_PHYTYPE_B:
if (phy_rev != 2 && phy_rev != 4
&& phy_rev != 6 && phy_rev != 7)
unsupported = 1;
break;
case B43legacy_PHYTYPE_G:
if (phy_rev > 8)
unsupported = 1;
break;
default:
unsupported = 1;
}
if (unsupported) {
b43legacyerr(dev->wl, "FOUND UNSUPPORTED PHY "
"(Analog %u, Type %u, Revision %u)\n",
analog_type, phy_type, phy_rev);
return -EOPNOTSUPP;
}
b43legacydbg(dev->wl, "Found PHY: Analog %u, Type %u, Revision %u\n",
analog_type, phy_type, phy_rev);
/* Get RADIO versioning */
if (dev->dev->bus->chip_id == 0x4317) {
if (dev->dev->bus->chip_rev == 0)
tmp = 0x3205017F;
else if (dev->dev->bus->chip_rev == 1)
tmp = 0x4205017F;
else
tmp = 0x5205017F;
} else {
b43legacy_write16(dev, B43legacy_MMIO_RADIO_CONTROL,
B43legacy_RADIOCTL_ID);
tmp = b43legacy_read16(dev, B43legacy_MMIO_RADIO_DATA_HIGH);
tmp <<= 16;
b43legacy_write16(dev, B43legacy_MMIO_RADIO_CONTROL,
B43legacy_RADIOCTL_ID);
tmp |= b43legacy_read16(dev, B43legacy_MMIO_RADIO_DATA_LOW);
}
radio_manuf = (tmp & 0x00000FFF);
radio_ver = (tmp & 0x0FFFF000) >> 12;
radio_rev = (tmp & 0xF0000000) >> 28;
switch (phy_type) {
case B43legacy_PHYTYPE_B:
if ((radio_ver & 0xFFF0) != 0x2050)
unsupported = 1;
break;
case B43legacy_PHYTYPE_G:
if (radio_ver != 0x2050)
unsupported = 1;
break;
default:
B43legacy_BUG_ON(1);
}
if (unsupported) {
b43legacyerr(dev->wl, "FOUND UNSUPPORTED RADIO "
"(Manuf 0x%X, Version 0x%X, Revision %u)\n",
radio_manuf, radio_ver, radio_rev);
return -EOPNOTSUPP;
}
b43legacydbg(dev->wl, "Found Radio: Manuf 0x%X, Version 0x%X,"
" Revision %u\n", radio_manuf, radio_ver, radio_rev);
phy->radio_manuf = radio_manuf;
phy->radio_ver = radio_ver;
phy->radio_rev = radio_rev;
phy->analog = analog_type;
phy->type = phy_type;
phy->rev = phy_rev;
return 0;
}
static void setup_struct_phy_for_init(struct b43legacy_wldev *dev,
struct b43legacy_phy *phy)
{
struct b43legacy_lopair *lo;
int i;
memset(phy->minlowsig, 0xFF, sizeof(phy->minlowsig));
memset(phy->minlowsigpos, 0, sizeof(phy->minlowsigpos));
/* Assume the radio is enabled. If it's not enabled, the state will
* immediately get fixed on the first periodic work run. */
dev->radio_hw_enable = true;
phy->savedpctlreg = 0xFFFF;
phy->aci_enable = false;
phy->aci_wlan_automatic = false;
phy->aci_hw_rssi = false;
lo = phy->_lo_pairs;
if (lo)
memset(lo, 0, sizeof(struct b43legacy_lopair) *
B43legacy_LO_COUNT);
phy->max_lb_gain = 0;
phy->trsw_rx_gain = 0;
/* Set default attenuation values. */
phy->bbatt = b43legacy_default_baseband_attenuation(dev);
phy->rfatt = b43legacy_default_radio_attenuation(dev);
phy->txctl1 = b43legacy_default_txctl1(dev);
phy->txpwr_offset = 0;
/* NRSSI */
phy->nrssislope = 0;
for (i = 0; i < ARRAY_SIZE(phy->nrssi); i++)
phy->nrssi[i] = -1000;
for (i = 0; i < ARRAY_SIZE(phy->nrssi_lt); i++)
phy->nrssi_lt[i] = i;
phy->lofcal = 0xFFFF;
phy->initval = 0xFFFF;
phy->interfmode = B43legacy_INTERFMODE_NONE;
phy->channel = 0xFF;
}
static void setup_struct_wldev_for_init(struct b43legacy_wldev *dev)
{
/* Flags */
dev->dfq_valid = false;
/* Stats */
memset(&dev->stats, 0, sizeof(dev->stats));
setup_struct_phy_for_init(dev, &dev->phy);
/* IRQ related flags */
dev->irq_reason = 0;
memset(dev->dma_reason, 0, sizeof(dev->dma_reason));
dev->irq_mask = B43legacy_IRQ_MASKTEMPLATE;
dev->mac_suspended = 1;
/* Noise calculation context */
memset(&dev->noisecalc, 0, sizeof(dev->noisecalc));
}
static void b43legacy_set_synth_pu_delay(struct b43legacy_wldev *dev,
bool idle) {
u16 pu_delay = 1050;
if (b43legacy_is_mode(dev->wl, NL80211_IFTYPE_ADHOC) || idle)
pu_delay = 500;
if ((dev->phy.radio_ver == 0x2050) && (dev->phy.radio_rev == 8))
pu_delay = max(pu_delay, (u16)2400);
b43legacy_shm_write16(dev, B43legacy_SHM_SHARED,
B43legacy_SHM_SH_SPUWKUP, pu_delay);
}
/* Set the TSF CFP pre-TargetBeaconTransmissionTime. */
static void b43legacy_set_pretbtt(struct b43legacy_wldev *dev)
{
u16 pretbtt;
/* The time value is in microseconds. */
if (b43legacy_is_mode(dev->wl, NL80211_IFTYPE_ADHOC))
pretbtt = 2;
else
pretbtt = 250;
b43legacy_shm_write16(dev, B43legacy_SHM_SHARED,
B43legacy_SHM_SH_PRETBTT, pretbtt);
b43legacy_write16(dev, B43legacy_MMIO_TSF_CFP_PRETBTT, pretbtt);
}
/* Shutdown a wireless core */
/* Locking: wl->mutex */
static void b43legacy_wireless_core_exit(struct b43legacy_wldev *dev)
{
struct b43legacy_phy *phy = &dev->phy;
u32 macctl;
B43legacy_WARN_ON(b43legacy_status(dev) > B43legacy_STAT_INITIALIZED);
if (b43legacy_status(dev) != B43legacy_STAT_INITIALIZED)
return;
b43legacy_set_status(dev, B43legacy_STAT_UNINIT);
/* Stop the microcode PSM. */
macctl = b43legacy_read32(dev, B43legacy_MMIO_MACCTL);
macctl &= ~B43legacy_MACCTL_PSM_RUN;
macctl |= B43legacy_MACCTL_PSM_JMP0;
b43legacy_write32(dev, B43legacy_MMIO_MACCTL, macctl);
b43legacy_leds_exit(dev);
b43legacy_rng_exit(dev->wl);
b43legacy_pio_free(dev);
b43legacy_dma_free(dev);
b43legacy_chip_exit(dev);
b43legacy_radio_turn_off(dev, 1);
b43legacy_switch_analog(dev, 0);
if (phy->dyn_tssi_tbl)
kfree(phy->tssi2dbm);
kfree(phy->lo_control);
phy->lo_control = NULL;
if (dev->wl->current_beacon) {
dev_kfree_skb_any(dev->wl->current_beacon);
dev->wl->current_beacon = NULL;
}
ssb_device_disable(dev->dev, 0);
ssb_bus_may_powerdown(dev->dev->bus);
}
static void prepare_phy_data_for_init(struct b43legacy_wldev *dev)
{
struct b43legacy_phy *phy = &dev->phy;
int i;
/* Set default attenuation values. */
phy->bbatt = b43legacy_default_baseband_attenuation(dev);
phy->rfatt = b43legacy_default_radio_attenuation(dev);
phy->txctl1 = b43legacy_default_txctl1(dev);
phy->txctl2 = 0xFFFF;
phy->txpwr_offset = 0;
/* NRSSI */
phy->nrssislope = 0;
for (i = 0; i < ARRAY_SIZE(phy->nrssi); i++)
phy->nrssi[i] = -1000;
for (i = 0; i < ARRAY_SIZE(phy->nrssi_lt); i++)
phy->nrssi_lt[i] = i;
phy->lofcal = 0xFFFF;
phy->initval = 0xFFFF;
phy->aci_enable = false;
phy->aci_wlan_automatic = false;
phy->aci_hw_rssi = false;
phy->antenna_diversity = 0xFFFF;
memset(phy->minlowsig, 0xFF, sizeof(phy->minlowsig));
memset(phy->minlowsigpos, 0, sizeof(phy->minlowsigpos));
/* Flags */
phy->calibrated = 0;
if (phy->_lo_pairs)
memset(phy->_lo_pairs, 0,
sizeof(struct b43legacy_lopair) * B43legacy_LO_COUNT);
memset(phy->loopback_gain, 0, sizeof(phy->loopback_gain));
}
/* Initialize a wireless core */
static int b43legacy_wireless_core_init(struct b43legacy_wldev *dev)
{
struct b43legacy_wl *wl = dev->wl;
struct ssb_bus *bus = dev->dev->bus;
struct b43legacy_phy *phy = &dev->phy;
struct ssb_sprom *sprom = &dev->dev->bus->sprom;
int err;
u32 hf;
u32 tmp;
B43legacy_WARN_ON(b43legacy_status(dev) != B43legacy_STAT_UNINIT);
err = ssb_bus_powerup(bus, 0);
if (err)
goto out;
if (!ssb_device_is_enabled(dev->dev)) {
tmp = phy->gmode ? B43legacy_TMSLOW_GMODE : 0;
b43legacy_wireless_core_reset(dev, tmp);
}
if ((phy->type == B43legacy_PHYTYPE_B) ||
(phy->type == B43legacy_PHYTYPE_G)) {
phy->_lo_pairs = kzalloc(sizeof(struct b43legacy_lopair)
* B43legacy_LO_COUNT,
GFP_KERNEL);
if (!phy->_lo_pairs)
return -ENOMEM;
}
setup_struct_wldev_for_init(dev);
err = b43legacy_phy_init_tssi2dbm_table(dev);
if (err)
goto err_kfree_lo_control;
/* Enable IRQ routing to this device. */
ssb_pcicore_dev_irqvecs_enable(&bus->pcicore, dev->dev);
prepare_phy_data_for_init(dev);
b43legacy_phy_calibrate(dev);
err = b43legacy_chip_init(dev);
if (err)
goto err_kfree_tssitbl;
b43legacy_shm_write16(dev, B43legacy_SHM_SHARED,
B43legacy_SHM_SH_WLCOREREV,
dev->dev->id.revision);
hf = b43legacy_hf_read(dev);
if (phy->type == B43legacy_PHYTYPE_G) {
hf |= B43legacy_HF_SYMW;
if (phy->rev == 1)
hf |= B43legacy_HF_GDCW;
if (sprom->boardflags_lo & B43legacy_BFL_PACTRL)
hf |= B43legacy_HF_OFDMPABOOST;
} else if (phy->type == B43legacy_PHYTYPE_B) {
hf |= B43legacy_HF_SYMW;
if (phy->rev >= 2 && phy->radio_ver == 0x2050)
hf &= ~B43legacy_HF_GDCW;
}
b43legacy_hf_write(dev, hf);
b43legacy_set_retry_limits(dev,
B43legacy_DEFAULT_SHORT_RETRY_LIMIT,
B43legacy_DEFAULT_LONG_RETRY_LIMIT);
b43legacy_shm_write16(dev, B43legacy_SHM_SHARED,
0x0044, 3);
b43legacy_shm_write16(dev, B43legacy_SHM_SHARED,
0x0046, 2);
/* Disable sending probe responses from firmware.
* Setting the MaxTime to one usec will always trigger
* a timeout, so we never send any probe resp.
* A timeout of zero is infinite. */
b43legacy_shm_write16(dev, B43legacy_SHM_SHARED,
B43legacy_SHM_SH_PRMAXTIME, 1);
b43legacy_rate_memory_init(dev);
/* Minimum Contention Window */
if (phy->type == B43legacy_PHYTYPE_B)
b43legacy_shm_write16(dev, B43legacy_SHM_WIRELESS,
0x0003, 31);
else
b43legacy_shm_write16(dev, B43legacy_SHM_WIRELESS,
0x0003, 15);
/* Maximum Contention Window */
b43legacy_shm_write16(dev, B43legacy_SHM_WIRELESS,
0x0004, 1023);
do {
if (b43legacy_using_pio(dev))
err = b43legacy_pio_init(dev);
else {
err = b43legacy_dma_init(dev);
if (!err)
b43legacy_qos_init(dev);
}
} while (err == -EAGAIN);
if (err)
goto err_chip_exit;
b43legacy_set_synth_pu_delay(dev, 1);
ssb_bus_powerup(bus, 1); /* Enable dynamic PCTL */
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
b43legacy_upload_card_macaddress(dev);
b43legacy_security_init(dev);
b43legacy_rng_init(wl);
ieee80211_wake_queues(dev->wl->hw);
b43legacy_set_status(dev, B43legacy_STAT_INITIALIZED);
b43legacy_leds_init(dev);
out:
return err;
err_chip_exit:
b43legacy_chip_exit(dev);
err_kfree_tssitbl:
if (phy->dyn_tssi_tbl)
kfree(phy->tssi2dbm);
err_kfree_lo_control:
kfree(phy->lo_control);
phy->lo_control = NULL;
ssb_bus_may_powerdown(bus);
B43legacy_WARN_ON(b43legacy_status(dev) != B43legacy_STAT_UNINIT);
return err;
}
static int b43legacy_op_add_interface(struct ieee80211_hw *hw,
struct ieee80211_vif *vif)
{
struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw);
struct b43legacy_wldev *dev;
unsigned long flags;
int err = -EOPNOTSUPP;
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
/* TODO: allow WDS/AP devices to coexist */
if (vif->type != NL80211_IFTYPE_AP &&
vif->type != NL80211_IFTYPE_STATION &&
vif->type != NL80211_IFTYPE_WDS &&
vif->type != NL80211_IFTYPE_ADHOC)
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
return -EOPNOTSUPP;
mutex_lock(&wl->mutex);
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
if (wl->operating)
goto out_mutex_unlock;
b43legacydbg(wl, "Adding Interface type %d\n", vif->type);
dev = wl->current_dev;
wl->operating = true;
wl->vif = vif;
wl->if_type = vif->type;
memcpy(wl->mac_addr, vif->addr, ETH_ALEN);
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
spin_lock_irqsave(&wl->irq_lock, flags);
b43legacy_adjust_opmode(dev);
b43legacy_set_pretbtt(dev);
b43legacy_set_synth_pu_delay(dev, 0);
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
b43legacy_upload_card_macaddress(dev);
spin_unlock_irqrestore(&wl->irq_lock, flags);
err = 0;
out_mutex_unlock:
mutex_unlock(&wl->mutex);
return err;
}
static void b43legacy_op_remove_interface(struct ieee80211_hw *hw,
struct ieee80211_vif *vif)
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
{
struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw);
struct b43legacy_wldev *dev = wl->current_dev;
unsigned long flags;
b43legacydbg(wl, "Removing Interface type %d\n", vif->type);
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
mutex_lock(&wl->mutex);
B43legacy_WARN_ON(!wl->operating);
B43legacy_WARN_ON(wl->vif != vif);
wl->vif = NULL;
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
wl->operating = false;
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
spin_lock_irqsave(&wl->irq_lock, flags);
b43legacy_adjust_opmode(dev);
memset(wl->mac_addr, 0, ETH_ALEN);
b43legacy_upload_card_macaddress(dev);
spin_unlock_irqrestore(&wl->irq_lock, flags);
mutex_unlock(&wl->mutex);
}
static int b43legacy_op_start(struct ieee80211_hw *hw)
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
{
struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw);
struct b43legacy_wldev *dev = wl->current_dev;
int did_init = 0;
int err = 0;
/* Kill all old instance specific information to make sure
* the card won't use it in the short timeframe between start
* and mac80211 reconfiguring it. */
memset(wl->bssid, 0, ETH_ALEN);
memset(wl->mac_addr, 0, ETH_ALEN);
wl->filter_flags = 0;
wl->beacon0_uploaded = false;
wl->beacon1_uploaded = false;
wl->beacon_templates_virgin = true;
wl->radio_enabled = true;
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
mutex_lock(&wl->mutex);
if (b43legacy_status(dev) < B43legacy_STAT_INITIALIZED) {
err = b43legacy_wireless_core_init(dev);
if (err)
goto out_mutex_unlock;
did_init = 1;
}
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
if (b43legacy_status(dev) < B43legacy_STAT_STARTED) {
err = b43legacy_wireless_core_start(dev);
if (err) {
if (did_init)
b43legacy_wireless_core_exit(dev);
goto out_mutex_unlock;
}
}
wiphy_rfkill_start_polling(hw->wiphy);
out_mutex_unlock:
mutex_unlock(&wl->mutex);
return err;
}
static void b43legacy_op_stop(struct ieee80211_hw *hw)
{
struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw);
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
struct b43legacy_wldev *dev = wl->current_dev;
cancel_work_sync(&(wl->beacon_update_trigger));
mutex_lock(&wl->mutex);
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
if (b43legacy_status(dev) >= B43legacy_STAT_STARTED)
b43legacy_wireless_core_stop(dev);
b43legacy_wireless_core_exit(dev);
wl->radio_enabled = false;
mutex_unlock(&wl->mutex);
}
static int b43legacy_op_beacon_set_tim(struct ieee80211_hw *hw,
struct ieee80211_sta *sta, bool set)
{
struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw);
unsigned long flags;
spin_lock_irqsave(&wl->irq_lock, flags);
b43legacy_update_templates(wl);
spin_unlock_irqrestore(&wl->irq_lock, flags);
return 0;
}
static int b43legacy_op_get_survey(struct ieee80211_hw *hw, int idx,
struct survey_info *survey)
{
struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw);
struct b43legacy_wldev *dev = wl->current_dev;
struct ieee80211_conf *conf = &hw->conf;
if (idx != 0)
return -ENOENT;
survey->channel = conf->channel;
survey->filled = SURVEY_INFO_NOISE_DBM;
survey->noise = dev->stats.link_noise;
return 0;
}
static const struct ieee80211_ops b43legacy_hw_ops = {
.tx = b43legacy_op_tx,
.conf_tx = b43legacy_op_conf_tx,
.add_interface = b43legacy_op_add_interface,
.remove_interface = b43legacy_op_remove_interface,
.config = b43legacy_op_dev_config,
.bss_info_changed = b43legacy_op_bss_info_changed,
.configure_filter = b43legacy_op_configure_filter,
.get_stats = b43legacy_op_get_stats,
.start = b43legacy_op_start,
.stop = b43legacy_op_stop,
.set_tim = b43legacy_op_beacon_set_tim,
.get_survey = b43legacy_op_get_survey,
.rfkill_poll = b43legacy_rfkill_poll,
};
/* Hard-reset the chip. Do not call this directly.
* Use b43legacy_controller_restart()
*/
static void b43legacy_chip_reset(struct work_struct *work)
{
struct b43legacy_wldev *dev =
container_of(work, struct b43legacy_wldev, restart_work);
struct b43legacy_wl *wl = dev->wl;
int err = 0;
int prev_status;
mutex_lock(&wl->mutex);
prev_status = b43legacy_status(dev);
/* Bring the device down... */
if (prev_status >= B43legacy_STAT_STARTED)
b43legacy_wireless_core_stop(dev);
if (prev_status >= B43legacy_STAT_INITIALIZED)
b43legacy_wireless_core_exit(dev);
/* ...and up again. */
if (prev_status >= B43legacy_STAT_INITIALIZED) {
err = b43legacy_wireless_core_init(dev);
if (err)
goto out;
}
if (prev_status >= B43legacy_STAT_STARTED) {
err = b43legacy_wireless_core_start(dev);
if (err) {
b43legacy_wireless_core_exit(dev);
goto out;
}
}
out:
if (err)
wl->current_dev = NULL; /* Failed to init the dev. */
mutex_unlock(&wl->mutex);
if (err)
b43legacyerr(wl, "Controller restart FAILED\n");
else
b43legacyinfo(wl, "Controller restarted\n");
}
static int b43legacy_setup_modes(struct b43legacy_wldev *dev,
int have_bphy,
int have_gphy)
{
struct ieee80211_hw *hw = dev->wl->hw;
struct b43legacy_phy *phy = &dev->phy;
phy->possible_phymodes = 0;
if (have_bphy) {
hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
&b43legacy_band_2GHz_BPHY;
phy->possible_phymodes |= B43legacy_PHYMODE_B;
}
if (have_gphy) {
hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
&b43legacy_band_2GHz_GPHY;
phy->possible_phymodes |= B43legacy_PHYMODE_G;
}
return 0;
}
static void b43legacy_wireless_core_detach(struct b43legacy_wldev *dev)
{
/* We release firmware that late to not be required to re-request
* is all the time when we reinit the core. */
b43legacy_release_firmware(dev);
}
static int b43legacy_wireless_core_attach(struct b43legacy_wldev *dev)
{
struct b43legacy_wl *wl = dev->wl;
struct ssb_bus *bus = dev->dev->bus;
struct pci_dev *pdev = (bus->bustype == SSB_BUSTYPE_PCI) ? bus->host_pci : NULL;
int err;
int have_bphy = 0;
int have_gphy = 0;
u32 tmp;
/* Do NOT do any device initialization here.
* Do it in wireless_core_init() instead.
* This function is for gathering basic information about the HW, only.
* Also some structs may be set up here. But most likely you want to
* have that in core_init(), too.
*/
err = ssb_bus_powerup(bus, 0);
if (err) {
b43legacyerr(wl, "Bus powerup failed\n");
goto out;
}
/* Get the PHY type. */
if (dev->dev->id.revision >= 5) {
u32 tmshigh;
tmshigh = ssb_read32(dev->dev, SSB_TMSHIGH);
have_gphy = !!(tmshigh & B43legacy_TMSHIGH_GPHY);
if (!have_gphy)
have_bphy = 1;
} else if (dev->dev->id.revision == 4)
have_gphy = 1;
else
have_bphy = 1;
dev->phy.gmode = (have_gphy || have_bphy);
dev->phy.radio_on = true;
tmp = dev->phy.gmode ? B43legacy_TMSLOW_GMODE : 0;
b43legacy_wireless_core_reset(dev, tmp);
err = b43legacy_phy_versioning(dev);
if (err)
goto err_powerdown;
/* Check if this device supports multiband. */
if (!pdev ||
(pdev->device != 0x4312 &&
pdev->device != 0x4319 &&
pdev->device != 0x4324)) {
/* No multiband support. */
have_bphy = 0;
have_gphy = 0;
switch (dev->phy.type) {
case B43legacy_PHYTYPE_B:
have_bphy = 1;
break;
case B43legacy_PHYTYPE_G:
have_gphy = 1;
break;
default:
B43legacy_BUG_ON(1);
}
}
dev->phy.gmode = (have_gphy || have_bphy);
tmp = dev->phy.gmode ? B43legacy_TMSLOW_GMODE : 0;
b43legacy_wireless_core_reset(dev, tmp);
err = b43legacy_validate_chipaccess(dev);
if (err)
goto err_powerdown;
err = b43legacy_setup_modes(dev, have_bphy, have_gphy);
if (err)
goto err_powerdown;
/* Now set some default "current_dev" */
if (!wl->current_dev)
wl->current_dev = dev;
INIT_WORK(&dev->restart_work, b43legacy_chip_reset);
b43legacy_radio_turn_off(dev, 1);
b43legacy_switch_analog(dev, 0);
ssb_device_disable(dev->dev, 0);
ssb_bus_may_powerdown(bus);
out:
return err;
err_powerdown:
ssb_bus_may_powerdown(bus);
return err;
}
static void b43legacy_one_core_detach(struct ssb_device *dev)
{
struct b43legacy_wldev *wldev;
struct b43legacy_wl *wl;
/* Do not cancel ieee80211-workqueue based work here.
* See comment in b43legacy_remove(). */
wldev = ssb_get_drvdata(dev);
wl = wldev->wl;
b43legacy_debugfs_remove_device(wldev);
b43legacy_wireless_core_detach(wldev);
list_del(&wldev->list);
wl->nr_devs--;
ssb_set_drvdata(dev, NULL);
kfree(wldev);
}
static int b43legacy_one_core_attach(struct ssb_device *dev,
struct b43legacy_wl *wl)
{
struct b43legacy_wldev *wldev;
int err = -ENOMEM;
wldev = kzalloc(sizeof(*wldev), GFP_KERNEL);
if (!wldev)
goto out;
wldev->dev = dev;
wldev->wl = wl;
b43legacy_set_status(wldev, B43legacy_STAT_UNINIT);
wldev->bad_frames_preempt = modparam_bad_frames_preempt;
tasklet_init(&wldev->isr_tasklet,
(void (*)(unsigned long))b43legacy_interrupt_tasklet,
(unsigned long)wldev);
if (modparam_pio)
wldev->__using_pio = true;
INIT_LIST_HEAD(&wldev->list);
err = b43legacy_wireless_core_attach(wldev);
if (err)
goto err_kfree_wldev;
list_add(&wldev->list, &wl->devlist);
wl->nr_devs++;
ssb_set_drvdata(dev, wldev);
b43legacy_debugfs_add_device(wldev);
out:
return err;
err_kfree_wldev:
kfree(wldev);
return err;
}
static void b43legacy_sprom_fixup(struct ssb_bus *bus)
{
/* boardflags workarounds */
if (bus->boardinfo.vendor == PCI_VENDOR_ID_APPLE &&
bus->boardinfo.type == 0x4E &&
bus->sprom.board_rev > 0x40)
bus->sprom.boardflags_lo |= B43legacy_BFL_PACTRL;
}
static void b43legacy_wireless_exit(struct ssb_device *dev,
struct b43legacy_wl *wl)
{
struct ieee80211_hw *hw = wl->hw;
ssb_set_devtypedata(dev, NULL);
ieee80211_free_hw(hw);
}
static int b43legacy_wireless_init(struct ssb_device *dev)
{
struct ssb_sprom *sprom = &dev->bus->sprom;
struct ieee80211_hw *hw;
struct b43legacy_wl *wl;
int err = -ENOMEM;
int queue_num;
b43legacy_sprom_fixup(dev->bus);
hw = ieee80211_alloc_hw(sizeof(*wl), &b43legacy_hw_ops);
if (!hw) {
b43legacyerr(NULL, "Could not allocate ieee80211 device\n");
goto out;
}
/* fill hw info */
hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
IEEE80211_HW_SIGNAL_DBM;
hw->wiphy->interface_modes =
BIT(NL80211_IFTYPE_AP) |
BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_WDS) |
BIT(NL80211_IFTYPE_ADHOC);
hw->queues = 1; /* FIXME: hardware has more queues */
hw->max_rates = 2;
SET_IEEE80211_DEV(hw, dev->dev);
if (is_valid_ether_addr(sprom->et1mac))
SET_IEEE80211_PERM_ADDR(hw, sprom->et1mac);
else
SET_IEEE80211_PERM_ADDR(hw, sprom->il0mac);
/* Get and initialize struct b43legacy_wl */
wl = hw_to_b43legacy_wl(hw);
memset(wl, 0, sizeof(*wl));
wl->hw = hw;
spin_lock_init(&wl->irq_lock);
spin_lock_init(&wl->leds_lock);
mutex_init(&wl->mutex);
INIT_LIST_HEAD(&wl->devlist);
INIT_WORK(&wl->beacon_update_trigger, b43legacy_beacon_update_trigger_work);
INIT_WORK(&wl->tx_work, b43legacy_tx_work);
/* Initialize queues and flags. */
for (queue_num = 0; queue_num < B43legacy_QOS_QUEUE_NUM; queue_num++) {
skb_queue_head_init(&wl->tx_queue[queue_num]);
wl->tx_queue_stopped[queue_num] = 0;
}
ssb_set_devtypedata(dev, wl);
b43legacyinfo(wl, "Broadcom %04X WLAN found (core revision %u)\n",
dev->bus->chip_id, dev->id.revision);
err = 0;
out:
return err;
}
static int b43legacy_probe(struct ssb_device *dev,
const struct ssb_device_id *id)
{
struct b43legacy_wl *wl;
int err;
int first = 0;
wl = ssb_get_devtypedata(dev);
if (!wl) {
/* Probing the first core - setup common struct b43legacy_wl */
first = 1;
err = b43legacy_wireless_init(dev);
if (err)
goto out;
wl = ssb_get_devtypedata(dev);
B43legacy_WARN_ON(!wl);
}
err = b43legacy_one_core_attach(dev, wl);
if (err)
goto err_wireless_exit;
/* setup and start work to load firmware */
INIT_WORK(&wl->firmware_load, b43legacy_request_firmware);
schedule_work(&wl->firmware_load);
out:
return err;
err_wireless_exit:
if (first)
b43legacy_wireless_exit(dev, wl);
return err;
}
static void b43legacy_remove(struct ssb_device *dev)
{
struct b43legacy_wl *wl = ssb_get_devtypedata(dev);
struct b43legacy_wldev *wldev = ssb_get_drvdata(dev);
/* We must cancel any work here before unregistering from ieee80211,
* as the ieee80211 unreg will destroy the workqueue. */
cancel_work_sync(&wldev->restart_work);
cancel_work_sync(&wl->firmware_load);
B43legacy_WARN_ON(!wl);
b43legacy: Fix crash on unload when firmware not available When b43legacy is loaded without the firmware being available, a following unload generates a kernel NULL pointer dereference BUG as follows: [ 214.330789] BUG: unable to handle kernel NULL pointer dereference at 0000004c [ 214.330997] IP: [<c104c395>] drain_workqueue+0x15/0x170 [ 214.331179] *pde = 00000000 [ 214.331311] Oops: 0000 [#1] SMP [ 214.331471] Modules linked in: b43legacy(-) ssb pcmcia mac80211 cfg80211 af_packet mperf arc4 ppdev sr_mod cdrom sg shpchp yenta_socket pcmcia_rsrc pci_hotplug pcmcia_core battery parport_pc parport floppy container ac button edd autofs4 ohci_hcd ehci_hcd usbcore usb_common thermal processor scsi_dh_rdac scsi_dh_hp_sw scsi_dh_emc scsi_dh_alua scsi_dh fan thermal_sys hwmon ata_generic pata_ali libata [last unloaded: cfg80211] [ 214.333421] Pid: 3639, comm: modprobe Not tainted 3.6.0-rc6-wl+ #163 Source Technology VIC 9921/ALI Based Notebook [ 214.333580] EIP: 0060:[<c104c395>] EFLAGS: 00010246 CPU: 0 [ 214.333687] EIP is at drain_workqueue+0x15/0x170 [ 214.333788] EAX: c162ac40 EBX: cdfb8360 ECX: 0000002a EDX: 00002a2a [ 214.333890] ESI: 00000000 EDI: 00000000 EBP: cd767e7c ESP: cd767e5c [ 214.333957] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 214.333957] CR0: 8005003b CR2: 0000004c CR3: 0c96a000 CR4: 00000090 [ 214.333957] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 214.333957] DR6: ffff0ff0 DR7: 00000400 [ 214.333957] Process modprobe (pid: 3639, ti=cd766000 task=cf802e90 task.ti=cd766000) [ 214.333957] Stack: [ 214.333957] 00000292 cd767e74 c12c5e09 00000296 00000296 cdfb8360 cdfb9220 00000000 [ 214.333957] cd767e90 c104c4fd cdfb8360 cdfb9220 cd682800 cd767ea4 d0c10184 cd682800 [ 214.333957] cd767ea4 cba31064 cd767eb8 d0867908 cba31064 d087e09c cd96f034 cd767ec4 [ 214.333957] Call Trace: [ 214.333957] [<c12c5e09>] ? skb_dequeue+0x49/0x60 [ 214.333957] [<c104c4fd>] destroy_workqueue+0xd/0x150 [ 214.333957] [<d0c10184>] ieee80211_unregister_hw+0xc4/0x100 [mac80211] [ 214.333957] [<d0867908>] b43legacy_remove+0x78/0x80 [b43legacy] [ 214.333957] [<d083654d>] ssb_device_remove+0x1d/0x30 [ssb] [ 214.333957] [<c126f15a>] __device_release_driver+0x5a/0xb0 [ 214.333957] [<c126fb07>] driver_detach+0x87/0x90 [ 214.333957] [<c126ef4c>] bus_remove_driver+0x6c/0xe0 [ 214.333957] [<c1270120>] driver_unregister+0x40/0x70 [ 214.333957] [<d083686b>] ssb_driver_unregister+0xb/0x10 [ssb] [ 214.333957] [<d087c488>] b43legacy_exit+0xd/0xf [b43legacy] [ 214.333957] [<c1089dde>] sys_delete_module+0x14e/0x2b0 [ 214.333957] [<c110a4a7>] ? vfs_write+0xf7/0x150 [ 214.333957] [<c1240050>] ? tty_write_lock+0x50/0x50 [ 214.333957] [<c110a6f8>] ? sys_write+0x38/0x70 [ 214.333957] [<c1397c55>] syscall_call+0x7/0xb [ 214.333957] Code: bc 27 00 00 00 00 a1 74 61 56 c1 55 89 e5 e8 a3 fc ff ff 5d c3 90 55 89 e5 57 56 89 c6 53 b8 40 ac 62 c1 83 ec 14 e8 bb b7 34 00 <8b> 46 4c 8d 50 01 85 c0 89 56 4c 75 03 83 0e 40 80 05 40 ac 62 [ 214.333957] EIP: [<c104c395>] drain_workqueue+0x15/0x170 SS:ESP 0068:cd767e5c [ 214.333957] CR2: 000000000000004c [ 214.341110] ---[ end trace c7e90ec026d875a6 ]---Index: wireless-testing/drivers/net/wireless/b43legacy/main.c The problem is fixed by making certain that the ucode pointer is not NULL before deregistering the driver in mac80211. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> [v 3.3.0+] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-26 17:32:02 +00:00
if (!wldev->fw.ucode)
return; /* NULL if fw never loaded */
if (wl->current_dev == wldev)
ieee80211_unregister_hw(wl->hw);
b43legacy_one_core_detach(dev);
if (list_empty(&wl->devlist))
/* Last core on the chip unregistered.
* We can destroy common struct b43legacy_wl.
*/
b43legacy_wireless_exit(dev, wl);
}
/* Perform a hardware reset. This can be called from any context. */
void b43legacy_controller_restart(struct b43legacy_wldev *dev,
const char *reason)
{
/* Must avoid requeueing, if we are in shutdown. */
if (b43legacy_status(dev) < B43legacy_STAT_INITIALIZED)
return;
b43legacyinfo(dev->wl, "Controller RESET (%s) ...\n", reason);
ieee80211_queue_work(dev->wl->hw, &dev->restart_work);
}
#ifdef CONFIG_PM
static int b43legacy_suspend(struct ssb_device *dev, pm_message_t state)
{
struct b43legacy_wldev *wldev = ssb_get_drvdata(dev);
struct b43legacy_wl *wl = wldev->wl;
b43legacydbg(wl, "Suspending...\n");
mutex_lock(&wl->mutex);
wldev->suspend_init_status = b43legacy_status(wldev);
if (wldev->suspend_init_status >= B43legacy_STAT_STARTED)
b43legacy_wireless_core_stop(wldev);
if (wldev->suspend_init_status >= B43legacy_STAT_INITIALIZED)
b43legacy_wireless_core_exit(wldev);
mutex_unlock(&wl->mutex);
b43legacydbg(wl, "Device suspended.\n");
return 0;
}
static int b43legacy_resume(struct ssb_device *dev)
{
struct b43legacy_wldev *wldev = ssb_get_drvdata(dev);
struct b43legacy_wl *wl = wldev->wl;
int err = 0;
b43legacydbg(wl, "Resuming...\n");
mutex_lock(&wl->mutex);
if (wldev->suspend_init_status >= B43legacy_STAT_INITIALIZED) {
err = b43legacy_wireless_core_init(wldev);
if (err) {
b43legacyerr(wl, "Resume failed at core init\n");
goto out;
}
}
if (wldev->suspend_init_status >= B43legacy_STAT_STARTED) {
err = b43legacy_wireless_core_start(wldev);
if (err) {
b43legacy_wireless_core_exit(wldev);
b43legacyerr(wl, "Resume failed at core start\n");
goto out;
}
}
b43legacydbg(wl, "Device resumed.\n");
out:
mutex_unlock(&wl->mutex);
return err;
}
#else /* CONFIG_PM */
# define b43legacy_suspend NULL
# define b43legacy_resume NULL
#endif /* CONFIG_PM */
static struct ssb_driver b43legacy_ssb_driver = {
.name = KBUILD_MODNAME,
.id_table = b43legacy_ssb_tbl,
.probe = b43legacy_probe,
.remove = b43legacy_remove,
.suspend = b43legacy_suspend,
.resume = b43legacy_resume,
};
static void b43legacy_print_driverinfo(void)
{
const char *feat_pci = "", *feat_leds = "",
*feat_pio = "", *feat_dma = "";
#ifdef CONFIG_B43LEGACY_PCI_AUTOSELECT
feat_pci = "P";
#endif
#ifdef CONFIG_B43LEGACY_LEDS
feat_leds = "L";
#endif
#ifdef CONFIG_B43LEGACY_PIO
feat_pio = "I";
#endif
#ifdef CONFIG_B43LEGACY_DMA
feat_dma = "D";
#endif
printk(KERN_INFO "Broadcom 43xx-legacy driver loaded "
"[ Features: %s%s%s%s ]\n",
feat_pci, feat_leds, feat_pio, feat_dma);
}
static int __init b43legacy_init(void)
{
int err;
b43legacy_debugfs_init();
err = ssb_driver_register(&b43legacy_ssb_driver);
if (err)
goto err_dfs_exit;
b43legacy_print_driverinfo();
return err;
err_dfs_exit:
b43legacy_debugfs_exit();
return err;
}
static void __exit b43legacy_exit(void)
{
ssb_driver_unregister(&b43legacy_ssb_driver);
b43legacy_debugfs_exit();
}
module_init(b43legacy_init)
module_exit(b43legacy_exit)