linux/fs/reiserfs/inode.c

3465 lines
93 KiB
C
Raw Normal View History

/*
* Copyright 2000 by Hans Reiser, licensing governed by reiserfs/README
*/
#include <linux/time.h>
#include <linux/fs.h>
#include "reiserfs.h"
#include "acl.h"
#include "xattr.h"
#include <linux/exportfs.h>
#include <linux/pagemap.h>
#include <linux/highmem.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
#include <linux/uaccess.h>
#include <asm/unaligned.h>
#include <linux/buffer_head.h>
#include <linux/mpage.h>
#include <linux/writeback.h>
#include <linux/quotaops.h>
#include <linux/swap.h>
#include <linux/uio.h>
int reiserfs_commit_write(struct file *f, struct page *page,
unsigned from, unsigned to);
void reiserfs_evict_inode(struct inode *inode)
{
/*
* We need blocks for transaction + (user+group) quota
* update (possibly delete)
*/
int jbegin_count =
JOURNAL_PER_BALANCE_CNT * 2 +
2 * REISERFS_QUOTA_INIT_BLOCKS(inode->i_sb);
struct reiserfs_transaction_handle th;
int err;
if (!inode->i_nlink && !is_bad_inode(inode))
dquot_initialize(inode);
mm + fs: store shadow entries in page cache Reclaim will be leaving shadow entries in the page cache radix tree upon evicting the real page. As those pages are found from the LRU, an iput() can lead to the inode being freed concurrently. At this point, reclaim must no longer install shadow pages because the inode freeing code needs to ensure the page tree is really empty. Add an address_space flag, AS_EXITING, that the inode freeing code sets under the tree lock before doing the final truncate. Reclaim will check for this flag before installing shadow pages. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 21:47:49 +00:00
truncate_inode_pages_final(&inode->i_data);
if (inode->i_nlink)
goto no_delete;
/*
* The = 0 happens when we abort creating a new inode
* for some reason like lack of space..
* also handles bad_inode case
*/
if (!(inode->i_state & I_NEW) && INODE_PKEY(inode)->k_objectid != 0) {
reiserfs_delete_xattrs(inode);
reiserfs_write_lock(inode->i_sb);
if (journal_begin(&th, inode->i_sb, jbegin_count))
goto out;
reiserfs_update_inode_transaction(inode);
reiserfs_discard_prealloc(&th, inode);
err = reiserfs_delete_object(&th, inode);
/*
* Do quota update inside a transaction for journaled quotas.
* We must do that after delete_object so that quota updates
* go into the same transaction as stat data deletion
*/
if (!err) {
int depth = reiserfs_write_unlock_nested(inode->i_sb);
dquot_free_inode(inode);
reiserfs_write_lock_nested(inode->i_sb, depth);
}
if (journal_end(&th))
goto out;
/*
* check return value from reiserfs_delete_object after
* ending the transaction
*/
if (err)
goto out;
/*
* all items of file are deleted, so we can remove
* "save" link
* we can't do anything about an error here
*/
remove_save_link(inode, 0 /* not truncate */);
out:
reiserfs_write_unlock(inode->i_sb);
} else {
/* no object items are in the tree */
;
}
/* note this must go after the journal_end to prevent deadlock */
clear_inode(inode);
dquot_drop(inode);
inode->i_blocks = 0;
return;
no_delete:
clear_inode(inode);
dquot_drop(inode);
}
static void _make_cpu_key(struct cpu_key *key, int version, __u32 dirid,
__u32 objectid, loff_t offset, int type, int length)
{
key->version = version;
key->on_disk_key.k_dir_id = dirid;
key->on_disk_key.k_objectid = objectid;
set_cpu_key_k_offset(key, offset);
set_cpu_key_k_type(key, type);
key->key_length = length;
}
/*
* take base of inode_key (it comes from inode always) (dirid, objectid)
* and version from an inode, set offset and type of key
*/
void make_cpu_key(struct cpu_key *key, struct inode *inode, loff_t offset,
int type, int length)
{
_make_cpu_key(key, get_inode_item_key_version(inode),
le32_to_cpu(INODE_PKEY(inode)->k_dir_id),
le32_to_cpu(INODE_PKEY(inode)->k_objectid), offset, type,
length);
}
/* when key is 0, do not set version and short key */
inline void make_le_item_head(struct item_head *ih, const struct cpu_key *key,
int version,
loff_t offset, int type, int length,
int entry_count /*or ih_free_space */ )
{
if (key) {
ih->ih_key.k_dir_id = cpu_to_le32(key->on_disk_key.k_dir_id);
ih->ih_key.k_objectid =
cpu_to_le32(key->on_disk_key.k_objectid);
}
put_ih_version(ih, version);
set_le_ih_k_offset(ih, offset);
set_le_ih_k_type(ih, type);
put_ih_item_len(ih, length);
/* set_ih_free_space (ih, 0); */
/*
* for directory items it is entry count, for directs and stat
* datas - 0xffff, for indirects - 0
*/
put_ih_entry_count(ih, entry_count);
}
/*
* FIXME: we might cache recently accessed indirect item
* Ugh. Not too eager for that....
* I cut the code until such time as I see a convincing argument (benchmark).
* I don't want a bloated inode struct..., and I don't like code complexity....
*/
/*
* cutting the code is fine, since it really isn't in use yet and is easy
* to add back in. But, Vladimir has a really good idea here. Think
* about what happens for reading a file. For each page,
* The VFS layer calls reiserfs_readpage, who searches the tree to find
* an indirect item. This indirect item has X number of pointers, where
* X is a big number if we've done the block allocation right. But,
* we only use one or two of these pointers during each call to readpage,
* needlessly researching again later on.
*
* The size of the cache could be dynamic based on the size of the file.
*
* I'd also like to see us cache the location the stat data item, since
* we are needlessly researching for that frequently.
*
* --chris
*/
/*
* If this page has a file tail in it, and
* it was read in by get_block_create_0, the page data is valid,
* but tail is still sitting in a direct item, and we can't write to
* it. So, look through this page, and check all the mapped buffers
* to make sure they have valid block numbers. Any that don't need
* to be unmapped, so that __block_write_begin will correctly call
* reiserfs_get_block to convert the tail into an unformatted node
*/
static inline void fix_tail_page_for_writing(struct page *page)
{
struct buffer_head *head, *next, *bh;
if (page && page_has_buffers(page)) {
head = page_buffers(page);
bh = head;
do {
next = bh->b_this_page;
if (buffer_mapped(bh) && bh->b_blocknr == 0) {
reiserfs_unmap_buffer(bh);
}
bh = next;
} while (bh != head);
}
}
/*
* reiserfs_get_block does not need to allocate a block only if it has been
* done already or non-hole position has been found in the indirect item
*/
static inline int allocation_needed(int retval, b_blocknr_t allocated,
struct item_head *ih,
__le32 * item, int pos_in_item)
{
if (allocated)
return 0;
if (retval == POSITION_FOUND && is_indirect_le_ih(ih) &&
get_block_num(item, pos_in_item))
return 0;
return 1;
}
static inline int indirect_item_found(int retval, struct item_head *ih)
{
return (retval == POSITION_FOUND) && is_indirect_le_ih(ih);
}
static inline void set_block_dev_mapped(struct buffer_head *bh,
b_blocknr_t block, struct inode *inode)
{
map_bh(bh, inode->i_sb, block);
}
/*
* files which were created in the earlier version can not be longer,
* than 2 gb
*/
static int file_capable(struct inode *inode, sector_t block)
{
/* it is new file. */
if (get_inode_item_key_version(inode) != KEY_FORMAT_3_5 ||
/* old file, but 'block' is inside of 2gb */
block < (1 << (31 - inode->i_sb->s_blocksize_bits)))
return 1;
return 0;
}
static int restart_transaction(struct reiserfs_transaction_handle *th,
struct inode *inode, struct treepath *path)
{
struct super_block *s = th->t_super;
int err;
BUG_ON(!th->t_trans_id);
BUG_ON(!th->t_refcount);
[PATCH] fix reiserfs bad path release panic One of our test team hit a reiserfs_panic while running fsstress tests on 2.6.19-rc1. The message looks like : REISERFS: panic(device Null superblock): reiserfs[5676]: assertion !(p->path_length != 1 ) failed at fs/reiserfs/stree.c:397:reiserfs_check_path: path not properly relsed. The backtrace looked : kernel BUG in reiserfs_panic at fs/reiserfs/prints.c:361! .reiserfs_check_path+0x58/0x74 .reiserfs_get_block+0x1444/0x1508 .__block_prepare_write+0x1c8/0x558 .block_prepare_write+0x34/0x64 .reiserfs_prepare_write+0x118/0x1d0 .generic_file_buffered_write+0x314/0x82c .__generic_file_aio_write_nolock+0x350/0x3e0 .__generic_file_write_nolock+0x78/0xb0 .generic_file_write+0x60/0xf0 .reiserfs_file_write+0x198/0x2038 .vfs_write+0xd0/0x1b4 .sys_write+0x4c/0x8c syscall_exit+0x0/0x4 Upon debugging I found that the restart_transaction was not releasing the path if the th->refcount was > 1. /*static*/ int restart_transaction(struct reiserfs_transaction_handle *th, struct inode *inode, struct path *path) { [...] /* we cannot restart while nested */ if (th->t_refcount > 1) { <<- Path is not released in this case! return 0; } pathrelse(path); <<- Path released here. [...] This could happen in such a situation : In reiserfs/inode.c: reiserfs_get_block() :: if (repeat == NO_DISK_SPACE || repeat == QUOTA_EXCEEDED) { /* restart the transaction to give the journal a chance to free ** some blocks. releases the path, so we have to go back to ** research if we succeed on the second try */ SB_JOURNAL(inode->i_sb)->j_next_async_flush = 1; -->> retval = restart_transaction(th, inode, &path); <<-- We are supposed to release the path, no matter we succeed or fail. But if the th->refcount is > 1, the path is still valid. And, if (retval) goto failure; repeat = _allocate_block(th, block, inode, &allocated_block_nr, NULL, create); If the above allocate_block fails with NO_DISK_SPACE or QUOTA_EXCEEDED, we would have path which is not released. if (repeat != NO_DISK_SPACE && repeat != QUOTA_EXCEEDED) { goto research; } if (repeat == QUOTA_EXCEEDED) retval = -EDQUOT; else retval = -ENOSPC; goto failure; [...] failure: [...] reiserfs_check_path(&path); << Panics here ! Attached here is a patch which could fix the issue. fix reiserfs/inode.c : restart_transaction() to release the path in all cases. The restart_transaction() doesn't release the path when the the journal handle has a refcount > 1. This would trigger a reiserfs_panic() if we encounter an -ENOSPC / -EDQUOT in reiserfs_get_block(). Signed-off-by: Suzuki K P <suzuki@in.ibm.com> Cc: "Vladimir V. Saveliev" <vs@namesys.com> Cc: <reiserfs-dev@namesys.com> Cc: Jeff Mahoney <jeffm@suse.com> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 04:36:10 +00:00
pathrelse(path);
/* we cannot restart while nested */
if (th->t_refcount > 1) {
return 0;
}
reiserfs_update_sd(th, inode);
err = journal_end(th);
if (!err) {
err = journal_begin(th, s, JOURNAL_PER_BALANCE_CNT * 6);
if (!err)
reiserfs_update_inode_transaction(inode);
}
return err;
}
/*
* it is called by get_block when create == 0. Returns block number
* for 'block'-th logical block of file. When it hits direct item it
* returns 0 (being called from bmap) or read direct item into piece
* of page (bh_result)
* Please improve the english/clarity in the comment above, as it is
* hard to understand.
*/
static int _get_block_create_0(struct inode *inode, sector_t block,
struct buffer_head *bh_result, int args)
{
INITIALIZE_PATH(path);
struct cpu_key key;
struct buffer_head *bh;
struct item_head *ih, tmp_ih;
b_blocknr_t blocknr;
char *p = NULL;
int chars;
int ret;
int result;
int done = 0;
unsigned long offset;
/* prepare the key to look for the 'block'-th block of file */
make_cpu_key(&key, inode,
(loff_t) block * inode->i_sb->s_blocksize + 1, TYPE_ANY,
3);
result = search_for_position_by_key(inode->i_sb, &key, &path);
if (result != POSITION_FOUND) {
pathrelse(&path);
if (p)
kunmap(bh_result->b_page);
if (result == IO_ERROR)
return -EIO;
/*
* We do not return -ENOENT if there is a hole but page is
* uptodate, because it means that there is some MMAPED data
* associated with it that is yet to be written to disk.
*/
if ((args & GET_BLOCK_NO_HOLE)
&& !PageUptodate(bh_result->b_page)) {
return -ENOENT;
}
return 0;
}
bh = get_last_bh(&path);
ih = tp_item_head(&path);
if (is_indirect_le_ih(ih)) {
__le32 *ind_item = (__le32 *) ih_item_body(bh, ih);
/*
* FIXME: here we could cache indirect item or part of it in
* the inode to avoid search_by_key in case of subsequent
* access to file
*/
blocknr = get_block_num(ind_item, path.pos_in_item);
ret = 0;
if (blocknr) {
map_bh(bh_result, inode->i_sb, blocknr);
if (path.pos_in_item ==
((ih_item_len(ih) / UNFM_P_SIZE) - 1)) {
set_buffer_boundary(bh_result);
}
} else
/*
* We do not return -ENOENT if there is a hole but
* page is uptodate, because it means that there is
* some MMAPED data associated with it that is
* yet to be written to disk.
*/
if ((args & GET_BLOCK_NO_HOLE)
&& !PageUptodate(bh_result->b_page)) {
ret = -ENOENT;
}
pathrelse(&path);
if (p)
kunmap(bh_result->b_page);
return ret;
}
/* requested data are in direct item(s) */
if (!(args & GET_BLOCK_READ_DIRECT)) {
/*
* we are called by bmap. FIXME: we can not map block of file
* when it is stored in direct item(s)
*/
pathrelse(&path);
if (p)
kunmap(bh_result->b_page);
return -ENOENT;
}
/*
* if we've got a direct item, and the buffer or page was uptodate,
* we don't want to pull data off disk again. skip to the
* end, where we map the buffer and return
*/
if (buffer_uptodate(bh_result)) {
goto finished;
} else
/*
* grab_tail_page can trigger calls to reiserfs_get_block on
* up to date pages without any buffers. If the page is up
* to date, we don't want read old data off disk. Set the up
* to date bit on the buffer instead and jump to the end
*/
if (!bh_result->b_page || PageUptodate(bh_result->b_page)) {
set_buffer_uptodate(bh_result);
goto finished;
}
/* read file tail into part of page */
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
offset = (cpu_key_k_offset(&key) - 1) & (PAGE_SIZE - 1);
copy_item_head(&tmp_ih, ih);
/*
* we only want to kmap if we are reading the tail into the page.
* this is not the common case, so we don't kmap until we are
* sure we need to. But, this means the item might move if
* kmap schedules
*/
if (!p)
p = (char *)kmap(bh_result->b_page);
p += offset;
memset(p, 0, inode->i_sb->s_blocksize);
do {
if (!is_direct_le_ih(ih)) {
BUG();
}
/*
* make sure we don't read more bytes than actually exist in
* the file. This can happen in odd cases where i_size isn't
* correct, and when direct item padding results in a few
* extra bytes at the end of the direct item
*/
if ((le_ih_k_offset(ih) + path.pos_in_item) > inode->i_size)
break;
if ((le_ih_k_offset(ih) - 1 + ih_item_len(ih)) > inode->i_size) {
chars =
inode->i_size - (le_ih_k_offset(ih) - 1) -
path.pos_in_item;
done = 1;
} else {
chars = ih_item_len(ih) - path.pos_in_item;
}
memcpy(p, ih_item_body(bh, ih) + path.pos_in_item, chars);
if (done)
break;
p += chars;
/*
* we done, if read direct item is not the last item of
* node FIXME: we could try to check right delimiting key
* to see whether direct item continues in the right
* neighbor or rely on i_size
*/
if (PATH_LAST_POSITION(&path) != (B_NR_ITEMS(bh) - 1))
break;
/* update key to look for the next piece */
set_cpu_key_k_offset(&key, cpu_key_k_offset(&key) + chars);
result = search_for_position_by_key(inode->i_sb, &key, &path);
if (result != POSITION_FOUND)
/* i/o error most likely */
break;
bh = get_last_bh(&path);
ih = tp_item_head(&path);
} while (1);
flush_dcache_page(bh_result->b_page);
kunmap(bh_result->b_page);
finished:
pathrelse(&path);
if (result == IO_ERROR)
return -EIO;
/*
* this buffer has valid data, but isn't valid for io. mapping it to
* block #0 tells the rest of reiserfs it just has a tail in it
*/
map_bh(bh_result, inode->i_sb, 0);
set_buffer_uptodate(bh_result);
return 0;
}
/*
* this is called to create file map. So, _get_block_create_0 will not
* read direct item
*/
static int reiserfs_bmap(struct inode *inode, sector_t block,
struct buffer_head *bh_result, int create)
{
if (!file_capable(inode, block))
return -EFBIG;
reiserfs_write_lock(inode->i_sb);
/* do not read the direct item */
_get_block_create_0(inode, block, bh_result, 0);
reiserfs_write_unlock(inode->i_sb);
return 0;
}
/*
* special version of get_block that is only used by grab_tail_page right
* now. It is sent to __block_write_begin, and when you try to get a
* block past the end of the file (or a block from a hole) it returns
* -ENOENT instead of a valid buffer. __block_write_begin expects to
* be able to do i/o on the buffers returned, unless an error value
* is also returned.
*
* So, this allows __block_write_begin to be used for reading a single block
* in a page. Where it does not produce a valid page for holes, or past the
* end of the file. This turns out to be exactly what we need for reading
* tails for conversion.
*
* The point of the wrapper is forcing a certain value for create, even
* though the VFS layer is calling this function with create==1. If you
* don't want to send create == GET_BLOCK_NO_HOLE to reiserfs_get_block,
* don't use this function.
*/
static int reiserfs_get_block_create_0(struct inode *inode, sector_t block,
struct buffer_head *bh_result,
int create)
{
return reiserfs_get_block(inode, block, bh_result, GET_BLOCK_NO_HOLE);
}
/*
* This is special helper for reiserfs_get_block in case we are executing
* direct_IO request.
*/
static int reiserfs_get_blocks_direct_io(struct inode *inode,
sector_t iblock,
struct buffer_head *bh_result,
int create)
{
int ret;
bh_result->b_page = NULL;
/*
* We set the b_size before reiserfs_get_block call since it is
* referenced in convert_tail_for_hole() that may be called from
* reiserfs_get_block()
*/
bh_result->b_size = (1 << inode->i_blkbits);
ret = reiserfs_get_block(inode, iblock, bh_result,
create | GET_BLOCK_NO_DANGLE);
if (ret)
goto out;
/* don't allow direct io onto tail pages */
if (buffer_mapped(bh_result) && bh_result->b_blocknr == 0) {
/*
* make sure future calls to the direct io funcs for this
* offset in the file fail by unmapping the buffer
*/
clear_buffer_mapped(bh_result);
ret = -EINVAL;
}
/*
* Possible unpacked tail. Flush the data before pages have
* disappeared
*/
if (REISERFS_I(inode)->i_flags & i_pack_on_close_mask) {
int err;
reiserfs: kill-the-BKL This patch is an attempt to remove the Bkl based locking scheme from reiserfs and is intended. It is a bit inspired from an old attempt by Peter Zijlstra: http://lkml.indiana.edu/hypermail/linux/kernel/0704.2/2174.html The bkl is heavily used in this filesystem to prevent from concurrent write accesses on the filesystem. Reiserfs makes a deep use of the specific properties of the Bkl: - It can be acqquired recursively by a same task - It is released on the schedule() calls and reacquired when schedule() returns The two properties above are a roadmap for the reiserfs write locking so it's very hard to simply replace it with a common mutex. - We need a recursive-able locking unless we want to restructure several blocks of the code. - We need to identify the sites where the bkl was implictly relaxed (schedule, wait, sync, etc...) so that we can in turn release and reacquire our new lock explicitly. Such implicit releases of the lock are often required to let other resources producer/consumer do their job or we can suffer unexpected starvations or deadlocks. So the new lock that replaces the bkl here is a per superblock mutex with a specific property: it can be acquired recursively by a same task, like the bkl. For such purpose, we integrate a lock owner and a lock depth field on the superblock information structure. The first axis on this patch is to turn reiserfs_write_(un)lock() function into a wrapper to manage this mutex. Also some explicit calls to lock_kernel() have been converted to reiserfs_write_lock() helpers. The second axis is to find the important blocking sites (schedule...(), wait_on_buffer(), sync_dirty_buffer(), etc...) and then apply an explicit release of the write lock on these locations before blocking. Then we can safely wait for those who can give us resources or those who need some. Typically this is a fight between the current writer, the reiserfs workqueue (aka the async commiter) and the pdflush threads. The third axis is a consequence of the second. The write lock is usually on top of a lock dependency chain which can include the journal lock, the flush lock or the commit lock. So it's dangerous to release and trying to reacquire the write lock while we still hold other locks. This is fine with the bkl: T1 T2 lock_kernel() mutex_lock(A) unlock_kernel() // do something lock_kernel() mutex_lock(A) -> already locked by T1 schedule() (and then unlock_kernel()) lock_kernel() mutex_unlock(A) .... This is not fine with a mutex: T1 T2 mutex_lock(write) mutex_lock(A) mutex_unlock(write) // do something mutex_lock(write) mutex_lock(A) -> already locked by T1 schedule() mutex_lock(write) -> already locked by T2 deadlock The solution in this patch is to provide a helper which releases the write lock and sleep a bit if we can't lock a mutex that depend on it. It's another simulation of the bkl behaviour. The last axis is to locate the fs callbacks that are called with the bkl held, according to Documentation/filesystem/Locking. Those are: - reiserfs_remount - reiserfs_fill_super - reiserfs_put_super Reiserfs didn't need to explicitly lock because of the context of these callbacks. But now we must take care of that with the new locking. After this patch, reiserfs suffers from a slight performance regression (for now). On UP, a high volume write with dd reports an average of 27 MB/s instead of 30 MB/s without the patch applied. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Reviewed-by: Ingo Molnar <mingo@elte.hu> Cc: Jeff Mahoney <jeffm@suse.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Bron Gondwana <brong@fastmail.fm> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> LKML-Reference: <1239070789-13354-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-07 02:19:49 +00:00
reiserfs_write_lock(inode->i_sb);
err = reiserfs_commit_for_inode(inode);
REISERFS_I(inode)->i_flags &= ~i_pack_on_close_mask;
reiserfs: kill-the-BKL This patch is an attempt to remove the Bkl based locking scheme from reiserfs and is intended. It is a bit inspired from an old attempt by Peter Zijlstra: http://lkml.indiana.edu/hypermail/linux/kernel/0704.2/2174.html The bkl is heavily used in this filesystem to prevent from concurrent write accesses on the filesystem. Reiserfs makes a deep use of the specific properties of the Bkl: - It can be acqquired recursively by a same task - It is released on the schedule() calls and reacquired when schedule() returns The two properties above are a roadmap for the reiserfs write locking so it's very hard to simply replace it with a common mutex. - We need a recursive-able locking unless we want to restructure several blocks of the code. - We need to identify the sites where the bkl was implictly relaxed (schedule, wait, sync, etc...) so that we can in turn release and reacquire our new lock explicitly. Such implicit releases of the lock are often required to let other resources producer/consumer do their job or we can suffer unexpected starvations or deadlocks. So the new lock that replaces the bkl here is a per superblock mutex with a specific property: it can be acquired recursively by a same task, like the bkl. For such purpose, we integrate a lock owner and a lock depth field on the superblock information structure. The first axis on this patch is to turn reiserfs_write_(un)lock() function into a wrapper to manage this mutex. Also some explicit calls to lock_kernel() have been converted to reiserfs_write_lock() helpers. The second axis is to find the important blocking sites (schedule...(), wait_on_buffer(), sync_dirty_buffer(), etc...) and then apply an explicit release of the write lock on these locations before blocking. Then we can safely wait for those who can give us resources or those who need some. Typically this is a fight between the current writer, the reiserfs workqueue (aka the async commiter) and the pdflush threads. The third axis is a consequence of the second. The write lock is usually on top of a lock dependency chain which can include the journal lock, the flush lock or the commit lock. So it's dangerous to release and trying to reacquire the write lock while we still hold other locks. This is fine with the bkl: T1 T2 lock_kernel() mutex_lock(A) unlock_kernel() // do something lock_kernel() mutex_lock(A) -> already locked by T1 schedule() (and then unlock_kernel()) lock_kernel() mutex_unlock(A) .... This is not fine with a mutex: T1 T2 mutex_lock(write) mutex_lock(A) mutex_unlock(write) // do something mutex_lock(write) mutex_lock(A) -> already locked by T1 schedule() mutex_lock(write) -> already locked by T2 deadlock The solution in this patch is to provide a helper which releases the write lock and sleep a bit if we can't lock a mutex that depend on it. It's another simulation of the bkl behaviour. The last axis is to locate the fs callbacks that are called with the bkl held, according to Documentation/filesystem/Locking. Those are: - reiserfs_remount - reiserfs_fill_super - reiserfs_put_super Reiserfs didn't need to explicitly lock because of the context of these callbacks. But now we must take care of that with the new locking. After this patch, reiserfs suffers from a slight performance regression (for now). On UP, a high volume write with dd reports an average of 27 MB/s instead of 30 MB/s without the patch applied. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Reviewed-by: Ingo Molnar <mingo@elte.hu> Cc: Jeff Mahoney <jeffm@suse.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Bron Gondwana <brong@fastmail.fm> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> LKML-Reference: <1239070789-13354-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-07 02:19:49 +00:00
reiserfs_write_unlock(inode->i_sb);
if (err < 0)
ret = err;
}
out:
return ret;
}
/*
* helper function for when reiserfs_get_block is called for a hole
* but the file tail is still in a direct item
* bh_result is the buffer head for the hole
* tail_offset is the offset of the start of the tail in the file
*
* This calls prepare_write, which will start a new transaction
* you should not be in a transaction, or have any paths held when you
* call this.
*/
static int convert_tail_for_hole(struct inode *inode,
struct buffer_head *bh_result,
loff_t tail_offset)
{
unsigned long index;
unsigned long tail_end;
unsigned long tail_start;
struct page *tail_page;
struct page *hole_page = bh_result->b_page;
int retval = 0;
if ((tail_offset & (bh_result->b_size - 1)) != 1)
return -EIO;
/* always try to read until the end of the block */
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
tail_start = tail_offset & (PAGE_SIZE - 1);
tail_end = (tail_start | (bh_result->b_size - 1)) + 1;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
index = tail_offset >> PAGE_SHIFT;
/*
* hole_page can be zero in case of direct_io, we are sure
* that we cannot get here if we write with O_DIRECT into tail page
*/
if (!hole_page || index != hole_page->index) {
tail_page = grab_cache_page(inode->i_mapping, index);
retval = -ENOMEM;
if (!tail_page) {
goto out;
}
} else {
tail_page = hole_page;
}
/*
* we don't have to make sure the conversion did not happen while
* we were locking the page because anyone that could convert
* must first take i_mutex.
*
* We must fix the tail page for writing because it might have buffers
* that are mapped, but have a block number of 0. This indicates tail
* data that has been read directly into the page, and
* __block_write_begin won't trigger a get_block in this case.
*/
fix_tail_page_for_writing(tail_page);
retval = __reiserfs_write_begin(tail_page, tail_start,
tail_end - tail_start);
if (retval)
goto unlock;
/* tail conversion might change the data in the page */
flush_dcache_page(tail_page);
retval = reiserfs_commit_write(NULL, tail_page, tail_start, tail_end);
unlock:
if (tail_page != hole_page) {
unlock_page(tail_page);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
put_page(tail_page);
}
out:
return retval;
}
static inline int _allocate_block(struct reiserfs_transaction_handle *th,
sector_t block,
struct inode *inode,
b_blocknr_t * allocated_block_nr,
struct treepath *path, int flags)
{
BUG_ON(!th->t_trans_id);
#ifdef REISERFS_PREALLOCATE
if (!(flags & GET_BLOCK_NO_IMUX)) {
return reiserfs_new_unf_blocknrs2(th, inode, allocated_block_nr,
path, block);
}
#endif
return reiserfs_new_unf_blocknrs(th, inode, allocated_block_nr, path,
block);
}
int reiserfs_get_block(struct inode *inode, sector_t block,
struct buffer_head *bh_result, int create)
{
int repeat, retval = 0;
/* b_blocknr_t is (unsigned) 32 bit int*/
b_blocknr_t allocated_block_nr = 0;
INITIALIZE_PATH(path);
int pos_in_item;
struct cpu_key key;
struct buffer_head *bh, *unbh = NULL;
struct item_head *ih, tmp_ih;
__le32 *item;
int done;
int fs_gen;
struct reiserfs_transaction_handle *th = NULL;
/*
* space reserved in transaction batch:
* . 3 balancings in direct->indirect conversion
* . 1 block involved into reiserfs_update_sd()
* XXX in practically impossible worst case direct2indirect()
* can incur (much) more than 3 balancings.
* quota update for user, group
*/
int jbegin_count =
JOURNAL_PER_BALANCE_CNT * 3 + 1 +
2 * REISERFS_QUOTA_TRANS_BLOCKS(inode->i_sb);
int version;
int dangle = 1;
loff_t new_offset =
(((loff_t) block) << inode->i_sb->s_blocksize_bits) + 1;
reiserfs_write_lock(inode->i_sb);
version = get_inode_item_key_version(inode);
if (!file_capable(inode, block)) {
reiserfs_write_unlock(inode->i_sb);
return -EFBIG;
}
/*
* if !create, we aren't changing the FS, so we don't need to
* log anything, so we don't need to start a transaction
*/
if (!(create & GET_BLOCK_CREATE)) {
int ret;
/* find number of block-th logical block of the file */
ret = _get_block_create_0(inode, block, bh_result,
create | GET_BLOCK_READ_DIRECT);
reiserfs_write_unlock(inode->i_sb);
return ret;
}
/*
* if we're already in a transaction, make sure to close
* any new transactions we start in this func
*/
if ((create & GET_BLOCK_NO_DANGLE) ||
reiserfs_transaction_running(inode->i_sb))
dangle = 0;
/*
* If file is of such a size, that it might have a tail and
* tails are enabled we should mark it as possibly needing
* tail packing on close
*/
if ((have_large_tails(inode->i_sb)
&& inode->i_size < i_block_size(inode) * 4)
|| (have_small_tails(inode->i_sb)
&& inode->i_size < i_block_size(inode)))
REISERFS_I(inode)->i_flags |= i_pack_on_close_mask;
/* set the key of the first byte in the 'block'-th block of file */
make_cpu_key(&key, inode, new_offset, TYPE_ANY, 3 /*key length */ );
if ((new_offset + inode->i_sb->s_blocksize - 1) > inode->i_size) {
start_trans:
th = reiserfs_persistent_transaction(inode->i_sb, jbegin_count);
if (!th) {
retval = -ENOMEM;
goto failure;
}
reiserfs_update_inode_transaction(inode);
}
research:
retval = search_for_position_by_key(inode->i_sb, &key, &path);
if (retval == IO_ERROR) {
retval = -EIO;
goto failure;
}
bh = get_last_bh(&path);
ih = tp_item_head(&path);
item = tp_item_body(&path);
pos_in_item = path.pos_in_item;
fs_gen = get_generation(inode->i_sb);
copy_item_head(&tmp_ih, ih);
if (allocation_needed
(retval, allocated_block_nr, ih, item, pos_in_item)) {
/* we have to allocate block for the unformatted node */
if (!th) {
pathrelse(&path);
goto start_trans;
}
repeat =
_allocate_block(th, block, inode, &allocated_block_nr,
&path, create);
/*
* restart the transaction to give the journal a chance to free
* some blocks. releases the path, so we have to go back to
* research if we succeed on the second try
*/
if (repeat == NO_DISK_SPACE || repeat == QUOTA_EXCEEDED) {
SB_JOURNAL(inode->i_sb)->j_next_async_flush = 1;
retval = restart_transaction(th, inode, &path);
if (retval)
goto failure;
repeat =
_allocate_block(th, block, inode,
&allocated_block_nr, NULL, create);
if (repeat != NO_DISK_SPACE && repeat != QUOTA_EXCEEDED) {
goto research;
}
if (repeat == QUOTA_EXCEEDED)
retval = -EDQUOT;
else
retval = -ENOSPC;
goto failure;
}
if (fs_changed(fs_gen, inode->i_sb)
&& item_moved(&tmp_ih, &path)) {
goto research;
}
}
if (indirect_item_found(retval, ih)) {
b_blocknr_t unfm_ptr;
/*
* 'block'-th block is in the file already (there is
* corresponding cell in some indirect item). But it may be
* zero unformatted node pointer (hole)
*/
unfm_ptr = get_block_num(item, pos_in_item);
if (unfm_ptr == 0) {
/* use allocated block to plug the hole */
reiserfs_prepare_for_journal(inode->i_sb, bh, 1);
if (fs_changed(fs_gen, inode->i_sb)
&& item_moved(&tmp_ih, &path)) {
reiserfs_restore_prepared_buffer(inode->i_sb,
bh);
goto research;
}
set_buffer_new(bh_result);
if (buffer_dirty(bh_result)
&& reiserfs_data_ordered(inode->i_sb))
reiserfs_add_ordered_list(inode, bh_result);
put_block_num(item, pos_in_item, allocated_block_nr);
unfm_ptr = allocated_block_nr;
journal_mark_dirty(th, bh);
reiserfs_update_sd(th, inode);
}
set_block_dev_mapped(bh_result, unfm_ptr, inode);
pathrelse(&path);
retval = 0;
if (!dangle && th)
retval = reiserfs_end_persistent_transaction(th);
reiserfs_write_unlock(inode->i_sb);
/*
* the item was found, so new blocks were not added to the file
* there is no need to make sure the inode is updated with this
* transaction
*/
return retval;
}
if (!th) {
pathrelse(&path);
goto start_trans;
}
/*
* desired position is not found or is in the direct item. We have
* to append file with holes up to 'block'-th block converting
* direct items to indirect one if necessary
*/
done = 0;
do {
if (is_statdata_le_ih(ih)) {
__le32 unp = 0;
struct cpu_key tmp_key;
/* indirect item has to be inserted */
make_le_item_head(&tmp_ih, &key, version, 1,
TYPE_INDIRECT, UNFM_P_SIZE,
0 /* free_space */ );
/*
* we are going to add 'block'-th block to the file.
* Use allocated block for that
*/
if (cpu_key_k_offset(&key) == 1) {
unp = cpu_to_le32(allocated_block_nr);
set_block_dev_mapped(bh_result,
allocated_block_nr, inode);
set_buffer_new(bh_result);
done = 1;
}
tmp_key = key; /* ;) */
set_cpu_key_k_offset(&tmp_key, 1);
PATH_LAST_POSITION(&path)++;
retval =
reiserfs_insert_item(th, &path, &tmp_key, &tmp_ih,
inode, (char *)&unp);
if (retval) {
reiserfs_free_block(th, inode,
allocated_block_nr, 1);
/*
* retval == -ENOSPC, -EDQUOT or -EIO
* or -EEXIST
*/
goto failure;
}
} else if (is_direct_le_ih(ih)) {
/* direct item has to be converted */
loff_t tail_offset;
tail_offset =
((le_ih_k_offset(ih) -
1) & ~(inode->i_sb->s_blocksize - 1)) + 1;
/*
* direct item we just found fits into block we have
* to map. Convert it into unformatted node: use
* bh_result for the conversion
*/
if (tail_offset == cpu_key_k_offset(&key)) {
set_block_dev_mapped(bh_result,
allocated_block_nr, inode);
unbh = bh_result;
done = 1;
} else {
/*
* we have to pad file tail stored in direct
* item(s) up to block size and convert it
* to unformatted node. FIXME: this should
* also get into page cache
*/
pathrelse(&path);
/*
* ugly, but we can only end the transaction if
* we aren't nested
*/
BUG_ON(!th->t_refcount);
if (th->t_refcount == 1) {
retval =
reiserfs_end_persistent_transaction
(th);
th = NULL;
if (retval)
goto failure;
}
retval =
convert_tail_for_hole(inode, bh_result,
tail_offset);
if (retval) {
if (retval != -ENOSPC)
reiserfs_error(inode->i_sb,
"clm-6004",
"convert tail failed "
"inode %lu, error %d",
inode->i_ino,
retval);
if (allocated_block_nr) {
/*
* the bitmap, the super,
* and the stat data == 3
*/
if (!th)
th = reiserfs_persistent_transaction(inode->i_sb, 3);
if (th)
reiserfs_free_block(th,
inode,
allocated_block_nr,
1);
}
goto failure;
}
goto research;
}
retval =
direct2indirect(th, inode, &path, unbh,
tail_offset);
if (retval) {
reiserfs_unmap_buffer(unbh);
reiserfs_free_block(th, inode,
allocated_block_nr, 1);
goto failure;
}
/*
* it is important the set_buffer_uptodate is done
* after the direct2indirect. The buffer might
* contain valid data newer than the data on disk
* (read by readpage, changed, and then sent here by
* writepage). direct2indirect needs to know if unbh
* was already up to date, so it can decide if the
* data in unbh needs to be replaced with data from
* the disk
*/
set_buffer_uptodate(unbh);
/*
* unbh->b_page == NULL in case of DIRECT_IO request,
* this means buffer will disappear shortly, so it
* should not be added to
*/
if (unbh->b_page) {
/*
* we've converted the tail, so we must
* flush unbh before the transaction commits
*/
reiserfs_add_tail_list(inode, unbh);
/*
* mark it dirty now to prevent commit_write
* from adding this buffer to the inode's
* dirty buffer list
*/
/*
* AKPM: changed __mark_buffer_dirty to
* mark_buffer_dirty(). It's still atomic,
* but it sets the page dirty too, which makes
* it eligible for writeback at any time by the
* VM (which was also the case with
* __mark_buffer_dirty())
*/
mark_buffer_dirty(unbh);
}
} else {
/*
* append indirect item with holes if needed, when
* appending pointer to 'block'-th block use block,
* which is already allocated
*/
struct cpu_key tmp_key;
/*
* We use this in case we need to allocate
* only one block which is a fastpath
*/
unp_t unf_single = 0;
unp_t *un;
__u64 max_to_insert =
MAX_ITEM_LEN(inode->i_sb->s_blocksize) /
UNFM_P_SIZE;
__u64 blocks_needed;
RFALSE(pos_in_item != ih_item_len(ih) / UNFM_P_SIZE,
"vs-804: invalid position for append");
/*
* indirect item has to be appended,
* set up key of that position
* (key type is unimportant)
*/
make_cpu_key(&tmp_key, inode,
le_key_k_offset(version,
&ih->ih_key) +
op_bytes_number(ih,
inode->i_sb->s_blocksize),
TYPE_INDIRECT, 3);
RFALSE(cpu_key_k_offset(&tmp_key) > cpu_key_k_offset(&key),
"green-805: invalid offset");
blocks_needed =
1 +
((cpu_key_k_offset(&key) -
cpu_key_k_offset(&tmp_key)) >> inode->i_sb->
s_blocksize_bits);
if (blocks_needed == 1) {
un = &unf_single;
} else {
un = kzalloc(min(blocks_needed, max_to_insert) * UNFM_P_SIZE, GFP_NOFS);
if (!un) {
un = &unf_single;
blocks_needed = 1;
max_to_insert = 0;
}
}
if (blocks_needed <= max_to_insert) {
/*
* we are going to add target block to
* the file. Use allocated block for that
*/
un[blocks_needed - 1] =
cpu_to_le32(allocated_block_nr);
set_block_dev_mapped(bh_result,
allocated_block_nr, inode);
set_buffer_new(bh_result);
done = 1;
} else {
/* paste hole to the indirect item */
/*
* If kmalloc failed, max_to_insert becomes
* zero and it means we only have space for
* one block
*/
blocks_needed =
max_to_insert ? max_to_insert : 1;
}
retval =
reiserfs_paste_into_item(th, &path, &tmp_key, inode,
(char *)un,
UNFM_P_SIZE *
blocks_needed);
if (blocks_needed != 1)
kfree(un);
if (retval) {
reiserfs_free_block(th, inode,
allocated_block_nr, 1);
goto failure;
}
if (!done) {
/*
* We need to mark new file size in case
* this function will be interrupted/aborted
* later on. And we may do this only for
* holes.
*/
inode->i_size +=
inode->i_sb->s_blocksize * blocks_needed;
}
}
if (done == 1)
break;
/*
* this loop could log more blocks than we had originally
* asked for. So, we have to allow the transaction to end
* if it is too big or too full. Update the inode so things
* are consistent if we crash before the function returns
* release the path so that anybody waiting on the path before
* ending their transaction will be able to continue.
*/
if (journal_transaction_should_end(th, th->t_blocks_allocated)) {
retval = restart_transaction(th, inode, &path);
if (retval)
goto failure;
}
reiserfs: kill-the-BKL This patch is an attempt to remove the Bkl based locking scheme from reiserfs and is intended. It is a bit inspired from an old attempt by Peter Zijlstra: http://lkml.indiana.edu/hypermail/linux/kernel/0704.2/2174.html The bkl is heavily used in this filesystem to prevent from concurrent write accesses on the filesystem. Reiserfs makes a deep use of the specific properties of the Bkl: - It can be acqquired recursively by a same task - It is released on the schedule() calls and reacquired when schedule() returns The two properties above are a roadmap for the reiserfs write locking so it's very hard to simply replace it with a common mutex. - We need a recursive-able locking unless we want to restructure several blocks of the code. - We need to identify the sites where the bkl was implictly relaxed (schedule, wait, sync, etc...) so that we can in turn release and reacquire our new lock explicitly. Such implicit releases of the lock are often required to let other resources producer/consumer do their job or we can suffer unexpected starvations or deadlocks. So the new lock that replaces the bkl here is a per superblock mutex with a specific property: it can be acquired recursively by a same task, like the bkl. For such purpose, we integrate a lock owner and a lock depth field on the superblock information structure. The first axis on this patch is to turn reiserfs_write_(un)lock() function into a wrapper to manage this mutex. Also some explicit calls to lock_kernel() have been converted to reiserfs_write_lock() helpers. The second axis is to find the important blocking sites (schedule...(), wait_on_buffer(), sync_dirty_buffer(), etc...) and then apply an explicit release of the write lock on these locations before blocking. Then we can safely wait for those who can give us resources or those who need some. Typically this is a fight between the current writer, the reiserfs workqueue (aka the async commiter) and the pdflush threads. The third axis is a consequence of the second. The write lock is usually on top of a lock dependency chain which can include the journal lock, the flush lock or the commit lock. So it's dangerous to release and trying to reacquire the write lock while we still hold other locks. This is fine with the bkl: T1 T2 lock_kernel() mutex_lock(A) unlock_kernel() // do something lock_kernel() mutex_lock(A) -> already locked by T1 schedule() (and then unlock_kernel()) lock_kernel() mutex_unlock(A) .... This is not fine with a mutex: T1 T2 mutex_lock(write) mutex_lock(A) mutex_unlock(write) // do something mutex_lock(write) mutex_lock(A) -> already locked by T1 schedule() mutex_lock(write) -> already locked by T2 deadlock The solution in this patch is to provide a helper which releases the write lock and sleep a bit if we can't lock a mutex that depend on it. It's another simulation of the bkl behaviour. The last axis is to locate the fs callbacks that are called with the bkl held, according to Documentation/filesystem/Locking. Those are: - reiserfs_remount - reiserfs_fill_super - reiserfs_put_super Reiserfs didn't need to explicitly lock because of the context of these callbacks. But now we must take care of that with the new locking. After this patch, reiserfs suffers from a slight performance regression (for now). On UP, a high volume write with dd reports an average of 27 MB/s instead of 30 MB/s without the patch applied. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Reviewed-by: Ingo Molnar <mingo@elte.hu> Cc: Jeff Mahoney <jeffm@suse.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Bron Gondwana <brong@fastmail.fm> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> LKML-Reference: <1239070789-13354-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-07 02:19:49 +00:00
/*
* inserting indirect pointers for a hole can take a
* long time. reschedule if needed and also release the write
* lock for others.
*/
reiserfs_cond_resched(inode->i_sb);
retval = search_for_position_by_key(inode->i_sb, &key, &path);
if (retval == IO_ERROR) {
retval = -EIO;
goto failure;
}
if (retval == POSITION_FOUND) {
reiserfs_warning(inode->i_sb, "vs-825",
"%K should not be found", &key);
retval = -EEXIST;
if (allocated_block_nr)
reiserfs_free_block(th, inode,
allocated_block_nr, 1);
pathrelse(&path);
goto failure;
}
bh = get_last_bh(&path);
ih = tp_item_head(&path);
item = tp_item_body(&path);
pos_in_item = path.pos_in_item;
} while (1);
retval = 0;
failure:
if (th && (!dangle || (retval && !th->t_trans_id))) {
int err;
if (th->t_trans_id)
reiserfs_update_sd(th, inode);
err = reiserfs_end_persistent_transaction(th);
if (err)
retval = err;
}
reiserfs_write_unlock(inode->i_sb);
reiserfs_check_path(&path);
return retval;
}
static int
reiserfs_readpages(struct file *file, struct address_space *mapping,
struct list_head *pages, unsigned nr_pages)
{
return mpage_readpages(mapping, pages, nr_pages, reiserfs_get_block);
}
/*
* Compute real number of used bytes by file
* Following three functions can go away when we'll have enough space in
* stat item
*/
static int real_space_diff(struct inode *inode, int sd_size)
{
int bytes;
loff_t blocksize = inode->i_sb->s_blocksize;
if (S_ISLNK(inode->i_mode) || S_ISDIR(inode->i_mode))
return sd_size;
/*
* End of file is also in full block with indirect reference, so round
* up to the next block.
*
* there is just no way to know if the tail is actually packed
* on the file, so we have to assume it isn't. When we pack the
* tail, we add 4 bytes to pretend there really is an unformatted
* node pointer
*/
bytes =
((inode->i_size +
(blocksize - 1)) >> inode->i_sb->s_blocksize_bits) * UNFM_P_SIZE +
sd_size;
return bytes;
}
static inline loff_t to_real_used_space(struct inode *inode, ulong blocks,
int sd_size)
{
if (S_ISLNK(inode->i_mode) || S_ISDIR(inode->i_mode)) {
return inode->i_size +
(loff_t) (real_space_diff(inode, sd_size));
}
return ((loff_t) real_space_diff(inode, sd_size)) +
(((loff_t) blocks) << 9);
}
/* Compute number of blocks used by file in ReiserFS counting */
static inline ulong to_fake_used_blocks(struct inode *inode, int sd_size)
{
loff_t bytes = inode_get_bytes(inode);
loff_t real_space = real_space_diff(inode, sd_size);
/* keeps fsck and non-quota versions of reiserfs happy */
if (S_ISLNK(inode->i_mode) || S_ISDIR(inode->i_mode)) {
bytes += (loff_t) 511;
}
/*
* files from before the quota patch might i_blocks such that
* bytes < real_space. Deal with that here to prevent it from
* going negative.
*/
if (bytes < real_space)
return 0;
return (bytes - real_space) >> 9;
}
/*
* BAD: new directories have stat data of new type and all other items
* of old type. Version stored in the inode says about body items, so
* in update_stat_data we can not rely on inode, but have to check
* item version directly
*/
/* called by read_locked_inode */
static void init_inode(struct inode *inode, struct treepath *path)
{
struct buffer_head *bh;
struct item_head *ih;
__u32 rdev;
bh = PATH_PLAST_BUFFER(path);
ih = tp_item_head(path);
copy_key(INODE_PKEY(inode), &ih->ih_key);
INIT_LIST_HEAD(&REISERFS_I(inode)->i_prealloc_list);
REISERFS_I(inode)->i_flags = 0;
REISERFS_I(inode)->i_prealloc_block = 0;
REISERFS_I(inode)->i_prealloc_count = 0;
REISERFS_I(inode)->i_trans_id = 0;
REISERFS_I(inode)->i_jl = NULL;
reiserfs_init_xattr_rwsem(inode);
if (stat_data_v1(ih)) {
struct stat_data_v1 *sd =
(struct stat_data_v1 *)ih_item_body(bh, ih);
unsigned long blocks;
set_inode_item_key_version(inode, KEY_FORMAT_3_5);
set_inode_sd_version(inode, STAT_DATA_V1);
inode->i_mode = sd_v1_mode(sd);
set_nlink(inode, sd_v1_nlink(sd));
i_uid_write(inode, sd_v1_uid(sd));
i_gid_write(inode, sd_v1_gid(sd));
inode->i_size = sd_v1_size(sd);
inode->i_atime.tv_sec = sd_v1_atime(sd);
inode->i_mtime.tv_sec = sd_v1_mtime(sd);
inode->i_ctime.tv_sec = sd_v1_ctime(sd);
inode->i_atime.tv_nsec = 0;
inode->i_ctime.tv_nsec = 0;
inode->i_mtime.tv_nsec = 0;
inode->i_blocks = sd_v1_blocks(sd);
inode->i_generation = le32_to_cpu(INODE_PKEY(inode)->k_dir_id);
blocks = (inode->i_size + 511) >> 9;
blocks = _ROUND_UP(blocks, inode->i_sb->s_blocksize >> 9);
/*
* there was a bug in <=3.5.23 when i_blocks could take
* negative values. Starting from 3.5.17 this value could
* even be stored in stat data. For such files we set
* i_blocks based on file size. Just 2 notes: this can be
* wrong for sparse files. On-disk value will be only
* updated if file's inode will ever change
*/
if (inode->i_blocks > blocks) {
inode->i_blocks = blocks;
}
rdev = sd_v1_rdev(sd);
REISERFS_I(inode)->i_first_direct_byte =
sd_v1_first_direct_byte(sd);
/*
* an early bug in the quota code can give us an odd
* number for the block count. This is incorrect, fix it here.
*/
if (inode->i_blocks & 1) {
inode->i_blocks++;
}
inode_set_bytes(inode,
to_real_used_space(inode, inode->i_blocks,
SD_V1_SIZE));
/*
* nopack is initially zero for v1 objects. For v2 objects,
* nopack is initialised from sd_attrs
*/
REISERFS_I(inode)->i_flags &= ~i_nopack_mask;
} else {
/*
* new stat data found, but object may have old items
* (directories and symlinks)
*/
struct stat_data *sd = (struct stat_data *)ih_item_body(bh, ih);
inode->i_mode = sd_v2_mode(sd);
set_nlink(inode, sd_v2_nlink(sd));
i_uid_write(inode, sd_v2_uid(sd));
inode->i_size = sd_v2_size(sd);
i_gid_write(inode, sd_v2_gid(sd));
inode->i_mtime.tv_sec = sd_v2_mtime(sd);
inode->i_atime.tv_sec = sd_v2_atime(sd);
inode->i_ctime.tv_sec = sd_v2_ctime(sd);
inode->i_ctime.tv_nsec = 0;
inode->i_mtime.tv_nsec = 0;
inode->i_atime.tv_nsec = 0;
inode->i_blocks = sd_v2_blocks(sd);
rdev = sd_v2_rdev(sd);
if (S_ISCHR(inode->i_mode) || S_ISBLK(inode->i_mode))
inode->i_generation =
le32_to_cpu(INODE_PKEY(inode)->k_dir_id);
else
inode->i_generation = sd_v2_generation(sd);
if (S_ISDIR(inode->i_mode) || S_ISLNK(inode->i_mode))
set_inode_item_key_version(inode, KEY_FORMAT_3_5);
else
set_inode_item_key_version(inode, KEY_FORMAT_3_6);
REISERFS_I(inode)->i_first_direct_byte = 0;
set_inode_sd_version(inode, STAT_DATA_V2);
inode_set_bytes(inode,
to_real_used_space(inode, inode->i_blocks,
SD_V2_SIZE));
/*
* read persistent inode attributes from sd and initialise
* generic inode flags from them
*/
REISERFS_I(inode)->i_attrs = sd_v2_attrs(sd);
sd_attrs_to_i_attrs(sd_v2_attrs(sd), inode);
}
pathrelse(path);
if (S_ISREG(inode->i_mode)) {
inode->i_op = &reiserfs_file_inode_operations;
inode->i_fop = &reiserfs_file_operations;
inode->i_mapping->a_ops = &reiserfs_address_space_operations;
} else if (S_ISDIR(inode->i_mode)) {
inode->i_op = &reiserfs_dir_inode_operations;
inode->i_fop = &reiserfs_dir_operations;
} else if (S_ISLNK(inode->i_mode)) {
inode->i_op = &reiserfs_symlink_inode_operations;
inode_nohighmem(inode);
inode->i_mapping->a_ops = &reiserfs_address_space_operations;
} else {
inode->i_blocks = 0;
inode->i_op = &reiserfs_special_inode_operations;
init_special_inode(inode, inode->i_mode, new_decode_dev(rdev));
}
}
/* update new stat data with inode fields */
static void inode2sd(void *sd, struct inode *inode, loff_t size)
{
struct stat_data *sd_v2 = (struct stat_data *)sd;
__u16 flags;
set_sd_v2_mode(sd_v2, inode->i_mode);
set_sd_v2_nlink(sd_v2, inode->i_nlink);
set_sd_v2_uid(sd_v2, i_uid_read(inode));
set_sd_v2_size(sd_v2, size);
set_sd_v2_gid(sd_v2, i_gid_read(inode));
set_sd_v2_mtime(sd_v2, inode->i_mtime.tv_sec);
set_sd_v2_atime(sd_v2, inode->i_atime.tv_sec);
set_sd_v2_ctime(sd_v2, inode->i_ctime.tv_sec);
set_sd_v2_blocks(sd_v2, to_fake_used_blocks(inode, SD_V2_SIZE));
if (S_ISCHR(inode->i_mode) || S_ISBLK(inode->i_mode))
set_sd_v2_rdev(sd_v2, new_encode_dev(inode->i_rdev));
else
set_sd_v2_generation(sd_v2, inode->i_generation);
flags = REISERFS_I(inode)->i_attrs;
i_attrs_to_sd_attrs(inode, &flags);
set_sd_v2_attrs(sd_v2, flags);
}
/* used to copy inode's fields to old stat data */
static void inode2sd_v1(void *sd, struct inode *inode, loff_t size)
{
struct stat_data_v1 *sd_v1 = (struct stat_data_v1 *)sd;
set_sd_v1_mode(sd_v1, inode->i_mode);
set_sd_v1_uid(sd_v1, i_uid_read(inode));
set_sd_v1_gid(sd_v1, i_gid_read(inode));
set_sd_v1_nlink(sd_v1, inode->i_nlink);
set_sd_v1_size(sd_v1, size);
set_sd_v1_atime(sd_v1, inode->i_atime.tv_sec);
set_sd_v1_ctime(sd_v1, inode->i_ctime.tv_sec);
set_sd_v1_mtime(sd_v1, inode->i_mtime.tv_sec);
if (S_ISCHR(inode->i_mode) || S_ISBLK(inode->i_mode))
set_sd_v1_rdev(sd_v1, new_encode_dev(inode->i_rdev));
else
set_sd_v1_blocks(sd_v1, to_fake_used_blocks(inode, SD_V1_SIZE));
/* Sigh. i_first_direct_byte is back */
set_sd_v1_first_direct_byte(sd_v1,
REISERFS_I(inode)->i_first_direct_byte);
}
/*
* NOTE, you must prepare the buffer head before sending it here,
* and then log it after the call
*/
static void update_stat_data(struct treepath *path, struct inode *inode,
loff_t size)
{
struct buffer_head *bh;
struct item_head *ih;
bh = PATH_PLAST_BUFFER(path);
ih = tp_item_head(path);
if (!is_statdata_le_ih(ih))
reiserfs_panic(inode->i_sb, "vs-13065", "key %k, found item %h",
INODE_PKEY(inode), ih);
/* path points to old stat data */
if (stat_data_v1(ih)) {
inode2sd_v1(ih_item_body(bh, ih), inode, size);
} else {
inode2sd(ih_item_body(bh, ih), inode, size);
}
return;
}
void reiserfs_update_sd_size(struct reiserfs_transaction_handle *th,
struct inode *inode, loff_t size)
{
struct cpu_key key;
INITIALIZE_PATH(path);
struct buffer_head *bh;
int fs_gen;
struct item_head *ih, tmp_ih;
int retval;
BUG_ON(!th->t_trans_id);
/* key type is unimportant */
make_cpu_key(&key, inode, SD_OFFSET, TYPE_STAT_DATA, 3);
for (;;) {
int pos;
/* look for the object's stat data */
retval = search_item(inode->i_sb, &key, &path);
if (retval == IO_ERROR) {
reiserfs_error(inode->i_sb, "vs-13050",
"i/o failure occurred trying to "
"update %K stat data", &key);
return;
}
if (retval == ITEM_NOT_FOUND) {
pos = PATH_LAST_POSITION(&path);
pathrelse(&path);
if (inode->i_nlink == 0) {
/*reiserfs_warning (inode->i_sb, "vs-13050: reiserfs_update_sd: i_nlink == 0, stat data not found"); */
return;
}
reiserfs_warning(inode->i_sb, "vs-13060",
"stat data of object %k (nlink == %d) "
"not found (pos %d)",
INODE_PKEY(inode), inode->i_nlink,
pos);
reiserfs_check_path(&path);
return;
}
/*
* sigh, prepare_for_journal might schedule. When it
* schedules the FS might change. We have to detect that,
* and loop back to the search if the stat data item has moved
*/
bh = get_last_bh(&path);
ih = tp_item_head(&path);
copy_item_head(&tmp_ih, ih);
fs_gen = get_generation(inode->i_sb);
reiserfs_prepare_for_journal(inode->i_sb, bh, 1);
/* Stat_data item has been moved after scheduling. */
if (fs_changed(fs_gen, inode->i_sb)
&& item_moved(&tmp_ih, &path)) {
reiserfs_restore_prepared_buffer(inode->i_sb, bh);
continue;
}
break;
}
update_stat_data(&path, inode, size);
journal_mark_dirty(th, bh);
pathrelse(&path);
return;
}
/*
* reiserfs_read_locked_inode is called to read the inode off disk, and it
* does a make_bad_inode when things go wrong. But, we need to make sure
* and clear the key in the private portion of the inode, otherwise a
* corresponding iput might try to delete whatever object the inode last
* represented.
*/
static void reiserfs_make_bad_inode(struct inode *inode)
{
memset(INODE_PKEY(inode), 0, KEY_SIZE);
make_bad_inode(inode);
}
/*
* initially this function was derived from minix or ext2's analog and
* evolved as the prototype did
*/
int reiserfs_init_locked_inode(struct inode *inode, void *p)
{
struct reiserfs_iget_args *args = (struct reiserfs_iget_args *)p;
inode->i_ino = args->objectid;
INODE_PKEY(inode)->k_dir_id = cpu_to_le32(args->dirid);
return 0;
}
/*
* looks for stat data in the tree, and fills up the fields of in-core
* inode stat data fields
*/
void reiserfs_read_locked_inode(struct inode *inode,
struct reiserfs_iget_args *args)
{
INITIALIZE_PATH(path_to_sd);
struct cpu_key key;
unsigned long dirino;
int retval;
dirino = args->dirid;
/*
* set version 1, version 2 could be used too, because stat data
* key is the same in both versions
*/
key.version = KEY_FORMAT_3_5;
key.on_disk_key.k_dir_id = dirino;
key.on_disk_key.k_objectid = inode->i_ino;
key.on_disk_key.k_offset = 0;
key.on_disk_key.k_type = 0;
/* look for the object's stat data */
retval = search_item(inode->i_sb, &key, &path_to_sd);
if (retval == IO_ERROR) {
reiserfs_error(inode->i_sb, "vs-13070",
"i/o failure occurred trying to find "
"stat data of %K", &key);
reiserfs_make_bad_inode(inode);
return;
}
/* a stale NFS handle can trigger this without it being an error */
if (retval != ITEM_FOUND) {
pathrelse(&path_to_sd);
reiserfs_make_bad_inode(inode);
clear_nlink(inode);
return;
}
init_inode(inode, &path_to_sd);
/*
* It is possible that knfsd is trying to access inode of a file
* that is being removed from the disk by some other thread. As we
* update sd on unlink all that is required is to check for nlink
* here. This bug was first found by Sizif when debugging
* SquidNG/Butterfly, forgotten, and found again after Philippe
* Gramoulle <philippe.gramoulle@mmania.com> reproduced it.
* More logical fix would require changes in fs/inode.c:iput() to
* remove inode from hash-table _after_ fs cleaned disk stuff up and
* in iget() to return NULL if I_FREEING inode is found in
* hash-table.
*/
/*
* Currently there is one place where it's ok to meet inode with
* nlink==0: processing of open-unlinked and half-truncated files
* during mount (fs/reiserfs/super.c:finish_unfinished()).
*/
if ((inode->i_nlink == 0) &&
!REISERFS_SB(inode->i_sb)->s_is_unlinked_ok) {
reiserfs_warning(inode->i_sb, "vs-13075",
"dead inode read from disk %K. "
"This is likely to be race with knfsd. Ignore",
&key);
reiserfs_make_bad_inode(inode);
}
/* init inode should be relsing */
reiserfs_check_path(&path_to_sd);
/*
* Stat data v1 doesn't support ACLs.
*/
if (get_inode_sd_version(inode) == STAT_DATA_V1)
cache_no_acl(inode);
}
/*
* reiserfs_find_actor() - "find actor" reiserfs supplies to iget5_locked().
*
* @inode: inode from hash table to check
* @opaque: "cookie" passed to iget5_locked(). This is &reiserfs_iget_args.
*
* This function is called by iget5_locked() to distinguish reiserfs inodes
* having the same inode numbers. Such inodes can only exist due to some
* error condition. One of them should be bad. Inodes with identical
* inode numbers (objectids) are distinguished by parent directory ids.
*
*/
int reiserfs_find_actor(struct inode *inode, void *opaque)
{
struct reiserfs_iget_args *args;
args = opaque;
/* args is already in CPU order */
return (inode->i_ino == args->objectid) &&
(le32_to_cpu(INODE_PKEY(inode)->k_dir_id) == args->dirid);
}
struct inode *reiserfs_iget(struct super_block *s, const struct cpu_key *key)
{
struct inode *inode;
struct reiserfs_iget_args args;
int depth;
args.objectid = key->on_disk_key.k_objectid;
args.dirid = key->on_disk_key.k_dir_id;
depth = reiserfs_write_unlock_nested(s);
inode = iget5_locked(s, key->on_disk_key.k_objectid,
reiserfs_find_actor, reiserfs_init_locked_inode,
(void *)(&args));
reiserfs_write_lock_nested(s, depth);
if (!inode)
return ERR_PTR(-ENOMEM);
if (inode->i_state & I_NEW) {
reiserfs_read_locked_inode(inode, &args);
unlock_new_inode(inode);
}
if (comp_short_keys(INODE_PKEY(inode), key) || is_bad_inode(inode)) {
/* either due to i/o error or a stale NFS handle */
iput(inode);
inode = NULL;
}
return inode;
}
static struct dentry *reiserfs_get_dentry(struct super_block *sb,
u32 objectid, u32 dir_id, u32 generation)
{
struct cpu_key key;
struct inode *inode;
key.on_disk_key.k_objectid = objectid;
key.on_disk_key.k_dir_id = dir_id;
reiserfs_write_lock(sb);
inode = reiserfs_iget(sb, &key);
if (inode && !IS_ERR(inode) && generation != 0 &&
generation != inode->i_generation) {
iput(inode);
inode = NULL;
}
reiserfs_write_unlock(sb);
return d_obtain_alias(inode);
}
struct dentry *reiserfs_fh_to_dentry(struct super_block *sb, struct fid *fid,
int fh_len, int fh_type)
{
/*
* fhtype happens to reflect the number of u32s encoded.
* due to a bug in earlier code, fhtype might indicate there
* are more u32s then actually fitted.
* so if fhtype seems to be more than len, reduce fhtype.
* Valid types are:
* 2 - objectid + dir_id - legacy support
* 3 - objectid + dir_id + generation
* 4 - objectid + dir_id + objectid and dirid of parent - legacy
* 5 - objectid + dir_id + generation + objectid and dirid of parent
* 6 - as above plus generation of directory
* 6 does not fit in NFSv2 handles
*/
if (fh_type > fh_len) {
if (fh_type != 6 || fh_len != 5)
reiserfs_warning(sb, "reiserfs-13077",
"nfsd/reiserfs, fhtype=%d, len=%d - odd",
fh_type, fh_len);
fh_type = fh_len;
}
if (fh_len < 2)
return NULL;
return reiserfs_get_dentry(sb, fid->raw[0], fid->raw[1],
(fh_type == 3 || fh_type >= 5) ? fid->raw[2] : 0);
}
struct dentry *reiserfs_fh_to_parent(struct super_block *sb, struct fid *fid,
int fh_len, int fh_type)
{
if (fh_type > fh_len)
fh_type = fh_len;
if (fh_type < 4)
return NULL;
return reiserfs_get_dentry(sb,
(fh_type >= 5) ? fid->raw[3] : fid->raw[2],
(fh_type >= 5) ? fid->raw[4] : fid->raw[3],
(fh_type == 6) ? fid->raw[5] : 0);
}
int reiserfs_encode_fh(struct inode *inode, __u32 * data, int *lenp,
struct inode *parent)
{
int maxlen = *lenp;
if (parent && (maxlen < 5)) {
*lenp = 5;
return FILEID_INVALID;
} else if (maxlen < 3) {
*lenp = 3;
return FILEID_INVALID;
}
data[0] = inode->i_ino;
data[1] = le32_to_cpu(INODE_PKEY(inode)->k_dir_id);
data[2] = inode->i_generation;
*lenp = 3;
if (parent) {
data[3] = parent->i_ino;
data[4] = le32_to_cpu(INODE_PKEY(parent)->k_dir_id);
*lenp = 5;
if (maxlen >= 6) {
data[5] = parent->i_generation;
*lenp = 6;
}
}
return *lenp;
}
/*
* looks for stat data, then copies fields to it, marks the buffer
* containing stat data as dirty
*/
/*
* reiserfs inodes are never really dirty, since the dirty inode call
* always logs them. This call allows the VFS inode marking routines
* to properly mark inodes for datasync and such, but only actually
* does something when called for a synchronous update.
*/
int reiserfs_write_inode(struct inode *inode, struct writeback_control *wbc)
{
struct reiserfs_transaction_handle th;
int jbegin_count = 1;
if (inode->i_sb->s_flags & MS_RDONLY)
return -EROFS;
/*
* memory pressure can sometimes initiate write_inode calls with
* sync == 1,
* these cases are just when the system needs ram, not when the
* inode needs to reach disk for safety, and they can safely be
* ignored because the altered inode has already been logged.
*/
if (wbc->sync_mode == WB_SYNC_ALL && !(current->flags & PF_MEMALLOC)) {
reiserfs_write_lock(inode->i_sb);
if (!journal_begin(&th, inode->i_sb, jbegin_count)) {
reiserfs_update_sd(&th, inode);
journal_end_sync(&th);
}
reiserfs_write_unlock(inode->i_sb);
}
return 0;
}
/*
* stat data of new object is inserted already, this inserts the item
* containing "." and ".." entries
*/
static int reiserfs_new_directory(struct reiserfs_transaction_handle *th,
struct inode *inode,
struct item_head *ih, struct treepath *path,
struct inode *dir)
{
struct super_block *sb = th->t_super;
char empty_dir[EMPTY_DIR_SIZE];
char *body = empty_dir;
struct cpu_key key;
int retval;
BUG_ON(!th->t_trans_id);
_make_cpu_key(&key, KEY_FORMAT_3_5, le32_to_cpu(ih->ih_key.k_dir_id),
le32_to_cpu(ih->ih_key.k_objectid), DOT_OFFSET,
TYPE_DIRENTRY, 3 /*key length */ );
/*
* compose item head for new item. Directories consist of items of
* old type (ITEM_VERSION_1). Do not set key (second arg is 0), it
* is done by reiserfs_new_inode
*/
if (old_format_only(sb)) {
make_le_item_head(ih, NULL, KEY_FORMAT_3_5, DOT_OFFSET,
TYPE_DIRENTRY, EMPTY_DIR_SIZE_V1, 2);
make_empty_dir_item_v1(body, ih->ih_key.k_dir_id,
ih->ih_key.k_objectid,
INODE_PKEY(dir)->k_dir_id,
INODE_PKEY(dir)->k_objectid);
} else {
make_le_item_head(ih, NULL, KEY_FORMAT_3_5, DOT_OFFSET,
TYPE_DIRENTRY, EMPTY_DIR_SIZE, 2);
make_empty_dir_item(body, ih->ih_key.k_dir_id,
ih->ih_key.k_objectid,
INODE_PKEY(dir)->k_dir_id,
INODE_PKEY(dir)->k_objectid);
}
/* look for place in the tree for new item */
retval = search_item(sb, &key, path);
if (retval == IO_ERROR) {
reiserfs_error(sb, "vs-13080",
"i/o failure occurred creating new directory");
return -EIO;
}
if (retval == ITEM_FOUND) {
pathrelse(path);
reiserfs_warning(sb, "vs-13070",
"object with this key exists (%k)",
&(ih->ih_key));
return -EEXIST;
}
/* insert item, that is empty directory item */
return reiserfs_insert_item(th, path, &key, ih, inode, body);
}
/*
* stat data of object has been inserted, this inserts the item
* containing the body of symlink
*/
static int reiserfs_new_symlink(struct reiserfs_transaction_handle *th,
struct inode *inode,
struct item_head *ih,
struct treepath *path, const char *symname,
int item_len)
{
struct super_block *sb = th->t_super;
struct cpu_key key;
int retval;
BUG_ON(!th->t_trans_id);
_make_cpu_key(&key, KEY_FORMAT_3_5,
le32_to_cpu(ih->ih_key.k_dir_id),
le32_to_cpu(ih->ih_key.k_objectid),
1, TYPE_DIRECT, 3 /*key length */ );
make_le_item_head(ih, NULL, KEY_FORMAT_3_5, 1, TYPE_DIRECT, item_len,
0 /*free_space */ );
/* look for place in the tree for new item */
retval = search_item(sb, &key, path);
if (retval == IO_ERROR) {
reiserfs_error(sb, "vs-13080",
"i/o failure occurred creating new symlink");
return -EIO;
}
if (retval == ITEM_FOUND) {
pathrelse(path);
reiserfs_warning(sb, "vs-13080",
"object with this key exists (%k)",
&(ih->ih_key));
return -EEXIST;
}
/* insert item, that is body of symlink */
return reiserfs_insert_item(th, path, &key, ih, inode, symname);
}
/*
* inserts the stat data into the tree, and then calls
* reiserfs_new_directory (to insert ".", ".." item if new object is
* directory) or reiserfs_new_symlink (to insert symlink body if new
* object is symlink) or nothing (if new object is regular file)
* NOTE! uid and gid must already be set in the inode. If we return
* non-zero due to an error, we have to drop the quota previously allocated
* for the fresh inode. This can only be done outside a transaction, so
* if we return non-zero, we also end the transaction.
*
* @th: active transaction handle
* @dir: parent directory for new inode
* @mode: mode of new inode
* @symname: symlink contents if inode is symlink
* @isize: 0 for regular file, EMPTY_DIR_SIZE for dirs, strlen(symname) for
* symlinks
* @inode: inode to be filled
* @security: optional security context to associate with this inode
*/
int reiserfs_new_inode(struct reiserfs_transaction_handle *th,
struct inode *dir, umode_t mode, const char *symname,
/* 0 for regular, EMTRY_DIR_SIZE for dirs,
strlen (symname) for symlinks) */
loff_t i_size, struct dentry *dentry,
struct inode *inode,
struct reiserfs_security_handle *security)
{
struct super_block *sb = dir->i_sb;
struct reiserfs_iget_args args;
INITIALIZE_PATH(path_to_key);
struct cpu_key key;
struct item_head ih;
struct stat_data sd;
int retval;
int err;
int depth;
BUG_ON(!th->t_trans_id);
depth = reiserfs_write_unlock_nested(sb);
err = dquot_alloc_inode(inode);
reiserfs_write_lock_nested(sb, depth);
if (err)
goto out_end_trans;
if (!dir->i_nlink) {
err = -EPERM;
goto out_bad_inode;
}
/* item head of new item */
ih.ih_key.k_dir_id = reiserfs_choose_packing(dir);
ih.ih_key.k_objectid = cpu_to_le32(reiserfs_get_unused_objectid(th));
if (!ih.ih_key.k_objectid) {
err = -ENOMEM;
goto out_bad_inode;
}
args.objectid = inode->i_ino = le32_to_cpu(ih.ih_key.k_objectid);
if (old_format_only(sb))
make_le_item_head(&ih, NULL, KEY_FORMAT_3_5, SD_OFFSET,
TYPE_STAT_DATA, SD_V1_SIZE, MAX_US_INT);
else
make_le_item_head(&ih, NULL, KEY_FORMAT_3_6, SD_OFFSET,
TYPE_STAT_DATA, SD_SIZE, MAX_US_INT);
memcpy(INODE_PKEY(inode), &ih.ih_key, KEY_SIZE);
args.dirid = le32_to_cpu(ih.ih_key.k_dir_id);
depth = reiserfs_write_unlock_nested(inode->i_sb);
err = insert_inode_locked4(inode, args.objectid,
reiserfs_find_actor, &args);
reiserfs_write_lock_nested(inode->i_sb, depth);
if (err) {
err = -EINVAL;
goto out_bad_inode;
}
if (old_format_only(sb))
/*
* not a perfect generation count, as object ids can be reused,
* but this is as good as reiserfs can do right now.
* note that the private part of inode isn't filled in yet,
* we have to use the directory.
*/
inode->i_generation = le32_to_cpu(INODE_PKEY(dir)->k_objectid);
else
#if defined( USE_INODE_GENERATION_COUNTER )
inode->i_generation =
le32_to_cpu(REISERFS_SB(sb)->s_rs->s_inode_generation);
#else
inode->i_generation = ++event;
#endif
/* fill stat data */
set_nlink(inode, (S_ISDIR(mode) ? 2 : 1));
/* uid and gid must already be set by the caller for quota init */
/* symlink cannot be immutable or append only, right? */
if (S_ISLNK(inode->i_mode))
inode->i_flags &= ~(S_IMMUTABLE | S_APPEND);
inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME_SEC;
inode->i_size = i_size;
inode->i_blocks = 0;
inode->i_bytes = 0;
REISERFS_I(inode)->i_first_direct_byte = S_ISLNK(mode) ? 1 :
U32_MAX /*NO_BYTES_IN_DIRECT_ITEM */ ;
INIT_LIST_HEAD(&REISERFS_I(inode)->i_prealloc_list);
REISERFS_I(inode)->i_flags = 0;
REISERFS_I(inode)->i_prealloc_block = 0;
REISERFS_I(inode)->i_prealloc_count = 0;
REISERFS_I(inode)->i_trans_id = 0;
REISERFS_I(inode)->i_jl = NULL;
REISERFS_I(inode)->i_attrs =
REISERFS_I(dir)->i_attrs & REISERFS_INHERIT_MASK;
sd_attrs_to_i_attrs(REISERFS_I(inode)->i_attrs, inode);
reiserfs_init_xattr_rwsem(inode);
/* key to search for correct place for new stat data */
_make_cpu_key(&key, KEY_FORMAT_3_6, le32_to_cpu(ih.ih_key.k_dir_id),
le32_to_cpu(ih.ih_key.k_objectid), SD_OFFSET,
TYPE_STAT_DATA, 3 /*key length */ );
/* find proper place for inserting of stat data */
retval = search_item(sb, &key, &path_to_key);
if (retval == IO_ERROR) {
err = -EIO;
goto out_bad_inode;
}
if (retval == ITEM_FOUND) {
pathrelse(&path_to_key);
err = -EEXIST;
goto out_bad_inode;
}
if (old_format_only(sb)) {
/* i_uid or i_gid is too big to be stored in stat data v3.5 */
if (i_uid_read(inode) & ~0xffff || i_gid_read(inode) & ~0xffff) {
pathrelse(&path_to_key);
err = -EINVAL;
goto out_bad_inode;
}
inode2sd_v1(&sd, inode, inode->i_size);
} else {
inode2sd(&sd, inode, inode->i_size);
}
/*
* store in in-core inode the key of stat data and version all
* object items will have (directory items will have old offset
* format, other new objects will consist of new items)
*/
if (old_format_only(sb) || S_ISDIR(mode) || S_ISLNK(mode))
set_inode_item_key_version(inode, KEY_FORMAT_3_5);
else
set_inode_item_key_version(inode, KEY_FORMAT_3_6);
if (old_format_only(sb))
set_inode_sd_version(inode, STAT_DATA_V1);
else
set_inode_sd_version(inode, STAT_DATA_V2);
/* insert the stat data into the tree */
#ifdef DISPLACE_NEW_PACKING_LOCALITIES
if (REISERFS_I(dir)->new_packing_locality)
th->displace_new_blocks = 1;
#endif
retval =
reiserfs_insert_item(th, &path_to_key, &key, &ih, inode,
(char *)(&sd));
if (retval) {
err = retval;
reiserfs_check_path(&path_to_key);
goto out_bad_inode;
}
#ifdef DISPLACE_NEW_PACKING_LOCALITIES
if (!th->displace_new_blocks)
REISERFS_I(dir)->new_packing_locality = 0;
#endif
if (S_ISDIR(mode)) {
/* insert item with "." and ".." */
retval =
reiserfs_new_directory(th, inode, &ih, &path_to_key, dir);
}
if (S_ISLNK(mode)) {
/* insert body of symlink */
if (!old_format_only(sb))
i_size = ROUND_UP(i_size);
retval =
reiserfs_new_symlink(th, inode, &ih, &path_to_key, symname,
i_size);
}
if (retval) {
err = retval;
reiserfs_check_path(&path_to_key);
journal_end(th);
goto out_inserted_sd;
}
if (reiserfs_posixacl(inode->i_sb)) {
reiserfs_write_unlock(inode->i_sb);
retval = reiserfs_inherit_default_acl(th, dir, dentry, inode);
reiserfs_write_lock(inode->i_sb);
if (retval) {
err = retval;
reiserfs_check_path(&path_to_key);
journal_end(th);
goto out_inserted_sd;
}
} else if (inode->i_sb->s_flags & MS_POSIXACL) {
reiserfs_warning(inode->i_sb, "jdm-13090",
"ACLs aren't enabled in the fs, "
"but vfs thinks they are!");
} else if (IS_PRIVATE(dir))
inode->i_flags |= S_PRIVATE;
if (security->name) {
reiserfs_write_unlock(inode->i_sb);
retval = reiserfs_security_write(th, inode, security);
reiserfs_write_lock(inode->i_sb);
if (retval) {
err = retval;
reiserfs_check_path(&path_to_key);
retval = journal_end(th);
if (retval)
err = retval;
goto out_inserted_sd;
}
}
reiserfs_update_sd(th, inode);
reiserfs_check_path(&path_to_key);
return 0;
out_bad_inode:
/* Invalidate the object, nothing was inserted yet */
INODE_PKEY(inode)->k_objectid = 0;
/* Quota change must be inside a transaction for journaling */
depth = reiserfs_write_unlock_nested(inode->i_sb);
dquot_free_inode(inode);
reiserfs_write_lock_nested(inode->i_sb, depth);
out_end_trans:
journal_end(th);
/*
* Drop can be outside and it needs more credits so it's better
* to have it outside
*/
depth = reiserfs_write_unlock_nested(inode->i_sb);
dquot_drop(inode);
reiserfs_write_lock_nested(inode->i_sb, depth);
inode->i_flags |= S_NOQUOTA;
make_bad_inode(inode);
out_inserted_sd:
clear_nlink(inode);
th->t_trans_id = 0; /* so the caller can't use this handle later */
unlock_new_inode(inode); /* OK to do even if we hadn't locked it */
iput(inode);
return err;
}
/*
* finds the tail page in the page cache,
* reads the last block in.
*
* On success, page_result is set to a locked, pinned page, and bh_result
* is set to an up to date buffer for the last block in the file. returns 0.
*
* tail conversion is not done, so bh_result might not be valid for writing
* check buffer_mapped(bh_result) and bh_result->b_blocknr != 0 before
* trying to write the block.
*
* on failure, nonzero is returned, page_result and bh_result are untouched.
*/
static int grab_tail_page(struct inode *inode,
struct page **page_result,
struct buffer_head **bh_result)
{
/*
* we want the page with the last byte in the file,
* not the page that will hold the next byte for appending
*/
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
unsigned long index = (inode->i_size - 1) >> PAGE_SHIFT;
unsigned long pos = 0;
unsigned long start = 0;
unsigned long blocksize = inode->i_sb->s_blocksize;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
unsigned long offset = (inode->i_size) & (PAGE_SIZE - 1);
struct buffer_head *bh;
struct buffer_head *head;
struct page *page;
int error;
/*
* we know that we are only called with inode->i_size > 0.
* we also know that a file tail can never be as big as a block
* If i_size % blocksize == 0, our file is currently block aligned
* and it won't need converting or zeroing after a truncate.
*/
if ((offset & (blocksize - 1)) == 0) {
return -ENOENT;
}
page = grab_cache_page(inode->i_mapping, index);
error = -ENOMEM;
if (!page) {
goto out;
}
/* start within the page of the last block in the file */
start = (offset / blocksize) * blocksize;
error = __block_write_begin(page, start, offset - start,
reiserfs_get_block_create_0);
if (error)
goto unlock;
head = page_buffers(page);
bh = head;
do {
if (pos >= start) {
break;
}
bh = bh->b_this_page;
pos += blocksize;
} while (bh != head);
if (!buffer_uptodate(bh)) {
/*
* note, this should never happen, prepare_write should be
* taking care of this for us. If the buffer isn't up to
* date, I've screwed up the code to find the buffer, or the
* code to call prepare_write
*/
reiserfs_error(inode->i_sb, "clm-6000",
"error reading block %lu", bh->b_blocknr);
error = -EIO;
goto unlock;
}
*bh_result = bh;
*page_result = page;
out:
return error;
unlock:
unlock_page(page);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
put_page(page);
return error;
}
/*
* vfs version of truncate file. Must NOT be called with
* a transaction already started.
*
* some code taken from block_truncate_page
*/
int reiserfs_truncate_file(struct inode *inode, int update_timestamps)
{
struct reiserfs_transaction_handle th;
/* we want the offset for the first byte after the end of the file */
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
unsigned long offset = inode->i_size & (PAGE_SIZE - 1);
unsigned blocksize = inode->i_sb->s_blocksize;
unsigned length;
struct page *page = NULL;
int error;
struct buffer_head *bh = NULL;
int err2;
reiserfs_write_lock(inode->i_sb);
if (inode->i_size > 0) {
error = grab_tail_page(inode, &page, &bh);
if (error) {
/*
* -ENOENT means we truncated past the end of the
* file, and get_block_create_0 could not find a
* block to read in, which is ok.
*/
if (error != -ENOENT)
reiserfs_error(inode->i_sb, "clm-6001",
"grab_tail_page failed %d",
error);
page = NULL;
bh = NULL;
}
}
/*
* so, if page != NULL, we have a buffer head for the offset at
* the end of the file. if the bh is mapped, and bh->b_blocknr != 0,
* then we have an unformatted node. Otherwise, we have a direct item,
* and no zeroing is required on disk. We zero after the truncate,
* because the truncate might pack the item anyway
* (it will unmap bh if it packs).
*
* it is enough to reserve space in transaction for 2 balancings:
* one for "save" link adding and another for the first
* cut_from_item. 1 is for update_sd
*/
error = journal_begin(&th, inode->i_sb,
JOURNAL_PER_BALANCE_CNT * 2 + 1);
if (error)
goto out;
reiserfs_update_inode_transaction(inode);
if (update_timestamps)
/*
* we are doing real truncate: if the system crashes
* before the last transaction of truncating gets committed
* - on reboot the file either appears truncated properly
* or not truncated at all
*/
add_save_link(&th, inode, 1);
err2 = reiserfs_do_truncate(&th, inode, page, update_timestamps);
error = journal_end(&th);
if (error)
goto out;
/* check reiserfs_do_truncate after ending the transaction */
if (err2) {
error = err2;
goto out;
}
if (update_timestamps) {
error = remove_save_link(inode, 1 /* truncate */);
if (error)
goto out;
}
if (page) {
length = offset & (blocksize - 1);
/* if we are not on a block boundary */
if (length) {
length = blocksize - length;
Pagecache zeroing: zero_user_segment, zero_user_segments and zero_user Simplify page cache zeroing of segments of pages through 3 functions zero_user_segments(page, start1, end1, start2, end2) Zeros two segments of the page. It takes the position where to start and end the zeroing which avoids length calculations and makes code clearer. zero_user_segment(page, start, end) Same for a single segment. zero_user(page, start, length) Length variant for the case where we know the length. We remove the zero_user_page macro. Issues: 1. Its a macro. Inline functions are preferable. 2. The KM_USER0 macro is only defined for HIGHMEM. Having to treat this special case everywhere makes the code needlessly complex. The parameter for zeroing is always KM_USER0 except in one single case that we open code. Avoiding KM_USER0 makes a lot of code not having to be dealing with the special casing for HIGHMEM anymore. Dealing with kmap is only necessary for HIGHMEM configurations. In those configurations we use KM_USER0 like we do for a series of other functions defined in highmem.h. Since KM_USER0 is depends on HIGHMEM the existing zero_user_page function could not be a macro. zero_user_* functions introduced here can be be inline because that constant is not used when these functions are called. Also extract the flushing of the caches to be outside of the kmap. [akpm@linux-foundation.org: fix nfs and ntfs build] [akpm@linux-foundation.org: fix ntfs build some more] Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Steven French <sfrench@us.ibm.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: <linux-ext4@vger.kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: Steven French <sfrench@us.ibm.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 06:28:29 +00:00
zero_user(page, offset, length);
if (buffer_mapped(bh) && bh->b_blocknr != 0) {
mark_buffer_dirty(bh);
}
}
unlock_page(page);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
put_page(page);
}
reiserfs_write_unlock(inode->i_sb);
return 0;
out:
if (page) {
unlock_page(page);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
put_page(page);
}
reiserfs_write_unlock(inode->i_sb);
return error;
}
static int map_block_for_writepage(struct inode *inode,
struct buffer_head *bh_result,
unsigned long block)
{
struct reiserfs_transaction_handle th;
int fs_gen;
struct item_head tmp_ih;
struct item_head *ih;
struct buffer_head *bh;
__le32 *item;
struct cpu_key key;
INITIALIZE_PATH(path);
int pos_in_item;
int jbegin_count = JOURNAL_PER_BALANCE_CNT;
loff_t byte_offset = ((loff_t)block << inode->i_sb->s_blocksize_bits)+1;
int retval;
int use_get_block = 0;
int bytes_copied = 0;
int copy_size;
int trans_running = 0;
/*
* catch places below that try to log something without
* starting a trans
*/
th.t_trans_id = 0;
if (!buffer_uptodate(bh_result)) {
return -EIO;
}
kmap(bh_result->b_page);
start_over:
reiserfs_write_lock(inode->i_sb);
make_cpu_key(&key, inode, byte_offset, TYPE_ANY, 3);
research:
retval = search_for_position_by_key(inode->i_sb, &key, &path);
if (retval != POSITION_FOUND) {
use_get_block = 1;
goto out;
}
bh = get_last_bh(&path);
ih = tp_item_head(&path);
item = tp_item_body(&path);
pos_in_item = path.pos_in_item;
/* we've found an unformatted node */
if (indirect_item_found(retval, ih)) {
if (bytes_copied > 0) {
reiserfs_warning(inode->i_sb, "clm-6002",
"bytes_copied %d", bytes_copied);
}
if (!get_block_num(item, pos_in_item)) {
/* crap, we are writing to a hole */
use_get_block = 1;
goto out;
}
set_block_dev_mapped(bh_result,
get_block_num(item, pos_in_item), inode);
} else if (is_direct_le_ih(ih)) {
char *p;
p = page_address(bh_result->b_page);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
p += (byte_offset - 1) & (PAGE_SIZE - 1);
copy_size = ih_item_len(ih) - pos_in_item;
fs_gen = get_generation(inode->i_sb);
copy_item_head(&tmp_ih, ih);
if (!trans_running) {
/* vs-3050 is gone, no need to drop the path */
retval = journal_begin(&th, inode->i_sb, jbegin_count);
if (retval)
goto out;
reiserfs_update_inode_transaction(inode);
trans_running = 1;
if (fs_changed(fs_gen, inode->i_sb)
&& item_moved(&tmp_ih, &path)) {
reiserfs_restore_prepared_buffer(inode->i_sb,
bh);
goto research;
}
}
reiserfs_prepare_for_journal(inode->i_sb, bh, 1);
if (fs_changed(fs_gen, inode->i_sb)
&& item_moved(&tmp_ih, &path)) {
reiserfs_restore_prepared_buffer(inode->i_sb, bh);
goto research;
}
memcpy(ih_item_body(bh, ih) + pos_in_item, p + bytes_copied,
copy_size);
journal_mark_dirty(&th, bh);
bytes_copied += copy_size;
set_block_dev_mapped(bh_result, 0, inode);
/* are there still bytes left? */
if (bytes_copied < bh_result->b_size &&
(byte_offset + bytes_copied) < inode->i_size) {
set_cpu_key_k_offset(&key,
cpu_key_k_offset(&key) +
copy_size);
goto research;
}
} else {
reiserfs_warning(inode->i_sb, "clm-6003",
"bad item inode %lu", inode->i_ino);
retval = -EIO;
goto out;
}
retval = 0;
out:
pathrelse(&path);
if (trans_running) {
int err = journal_end(&th);
if (err)
retval = err;
trans_running = 0;
}
reiserfs_write_unlock(inode->i_sb);
/* this is where we fill in holes in the file. */
if (use_get_block) {
retval = reiserfs_get_block(inode, block, bh_result,
GET_BLOCK_CREATE | GET_BLOCK_NO_IMUX
| GET_BLOCK_NO_DANGLE);
if (!retval) {
if (!buffer_mapped(bh_result)
|| bh_result->b_blocknr == 0) {
/* get_block failed to find a mapped unformatted node. */
use_get_block = 0;
goto start_over;
}
}
}
kunmap(bh_result->b_page);
if (!retval && buffer_mapped(bh_result) && bh_result->b_blocknr == 0) {
/*
* we've copied data from the page into the direct item, so the
* buffer in the page is now clean, mark it to reflect that.
*/
lock_buffer(bh_result);
clear_buffer_dirty(bh_result);
unlock_buffer(bh_result);
}
return retval;
}
/*
* mason@suse.com: updated in 2.5.54 to follow the same general io
* start/recovery path as __block_write_full_page, along with special
* code to handle reiserfs tails.
*/
static int reiserfs_write_full_page(struct page *page,
struct writeback_control *wbc)
{
struct inode *inode = page->mapping->host;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
unsigned long end_index = inode->i_size >> PAGE_SHIFT;
int error = 0;
unsigned long block;
sector_t last_block;
struct buffer_head *head, *bh;
int partial = 0;
int nr = 0;
int checked = PageChecked(page);
struct reiserfs_transaction_handle th;
struct super_block *s = inode->i_sb;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
int bh_per_page = PAGE_SIZE / s->s_blocksize;
th.t_trans_id = 0;
/* no logging allowed when nonblocking or from PF_MEMALLOC */
if (checked && (current->flags & PF_MEMALLOC)) {
redirty_page_for_writepage(wbc, page);
unlock_page(page);
return 0;
}
/*
* The page dirty bit is cleared before writepage is called, which
* means we have to tell create_empty_buffers to make dirty buffers
* The page really should be up to date at this point, so tossing
* in the BH_Uptodate is just a sanity check.
*/
if (!page_has_buffers(page)) {
create_empty_buffers(page, s->s_blocksize,
(1 << BH_Dirty) | (1 << BH_Uptodate));
}
head = page_buffers(page);
/*
* last page in the file, zero out any contents past the
* last byte in the file
*/
if (page->index >= end_index) {
unsigned last_offset;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
last_offset = inode->i_size & (PAGE_SIZE - 1);
/* no file contents in this page */
if (page->index >= end_index + 1 || !last_offset) {
unlock_page(page);
return 0;
}
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
zero_user_segment(page, last_offset, PAGE_SIZE);
}
bh = head;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
block = page->index << (PAGE_SHIFT - s->s_blocksize_bits);
last_block = (i_size_read(inode) - 1) >> inode->i_blkbits;
/* first map all the buffers, logging any direct items we find */
do {
if (block > last_block) {
/*
* This can happen when the block size is less than
* the page size. The corresponding bytes in the page
* were zero filled above
*/
clear_buffer_dirty(bh);
set_buffer_uptodate(bh);
} else if ((checked || buffer_dirty(bh)) &&
(!buffer_mapped(bh) || (buffer_mapped(bh)
&& bh->b_blocknr ==
0))) {
/*
* not mapped yet, or it points to a direct item, search
* the btree for the mapping info, and log any direct
* items found
*/
if ((error = map_block_for_writepage(inode, bh, block))) {
goto fail;
}
}
bh = bh->b_this_page;
block++;
} while (bh != head);
/*
* we start the transaction after map_block_for_writepage,
* because it can create holes in the file (an unbounded operation).
* starting it here, we can make a reliable estimate for how many
* blocks we're going to log
*/
if (checked) {
ClearPageChecked(page);
reiserfs_write_lock(s);
error = journal_begin(&th, s, bh_per_page + 1);
if (error) {
reiserfs_write_unlock(s);
goto fail;
}
reiserfs_update_inode_transaction(inode);
}
/* now go through and lock any dirty buffers on the page */
do {
get_bh(bh);
if (!buffer_mapped(bh))
continue;
if (buffer_mapped(bh) && bh->b_blocknr == 0)
continue;
if (checked) {
reiserfs_prepare_for_journal(s, bh, 1);
journal_mark_dirty(&th, bh);
continue;
}
/*
* from this point on, we know the buffer is mapped to a
* real block and not a direct item
*/
if (wbc->sync_mode != WB_SYNC_NONE) {
lock_buffer(bh);
} else {
if (!trylock_buffer(bh)) {
redirty_page_for_writepage(wbc, page);
continue;
}
}
if (test_clear_buffer_dirty(bh)) {
mark_buffer_async_write(bh);
} else {
unlock_buffer(bh);
}
} while ((bh = bh->b_this_page) != head);
if (checked) {
error = journal_end(&th);
reiserfs_write_unlock(s);
if (error)
goto fail;
}
BUG_ON(PageWriteback(page));
set_page_writeback(page);
unlock_page(page);
/*
* since any buffer might be the only dirty buffer on the page,
* the first submit_bh can bring the page out of writeback.
* be careful with the buffers.
*/
do {
struct buffer_head *next = bh->b_this_page;
if (buffer_async_write(bh)) {
submit_bh(REQ_OP_WRITE, 0, bh);
nr++;
}
put_bh(bh);
bh = next;
} while (bh != head);
error = 0;
done:
if (nr == 0) {
/*
* if this page only had a direct item, it is very possible for
* no io to be required without there being an error. Or,
* someone else could have locked them and sent them down the
* pipe without locking the page
*/
bh = head;
do {
if (!buffer_uptodate(bh)) {
partial = 1;
break;
}
bh = bh->b_this_page;
} while (bh != head);
if (!partial)
SetPageUptodate(page);
end_page_writeback(page);
}
return error;
fail:
/*
* catches various errors, we need to make sure any valid dirty blocks
* get to the media. The page is currently locked and not marked for
* writeback
*/
ClearPageUptodate(page);
bh = head;
do {
get_bh(bh);
if (buffer_mapped(bh) && buffer_dirty(bh) && bh->b_blocknr) {
lock_buffer(bh);
mark_buffer_async_write(bh);
} else {
/*
* clear any dirty bits that might have come from
* getting attached to a dirty page
*/
clear_buffer_dirty(bh);
}
bh = bh->b_this_page;
} while (bh != head);
SetPageError(page);
BUG_ON(PageWriteback(page));
set_page_writeback(page);
unlock_page(page);
do {
struct buffer_head *next = bh->b_this_page;
if (buffer_async_write(bh)) {
clear_buffer_dirty(bh);
submit_bh(REQ_OP_WRITE, 0, bh);
nr++;
}
put_bh(bh);
bh = next;
} while (bh != head);
goto done;
}
static int reiserfs_readpage(struct file *f, struct page *page)
{
return block_read_full_page(page, reiserfs_get_block);
}
static int reiserfs_writepage(struct page *page, struct writeback_control *wbc)
{
struct inode *inode = page->mapping->host;
reiserfs_wait_on_write_block(inode->i_sb);
return reiserfs_write_full_page(page, wbc);
}
static void reiserfs_truncate_failed_write(struct inode *inode)
{
truncate_inode_pages(inode->i_mapping, inode->i_size);
reiserfs_truncate_file(inode, 0);
}
static int reiserfs_write_begin(struct file *file,
struct address_space *mapping,
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata)
{
struct inode *inode;
struct page *page;
pgoff_t index;
int ret;
int old_ref = 0;
inode = mapping->host;
*fsdata = NULL;
if (flags & AOP_FLAG_CONT_EXPAND &&
(pos & (inode->i_sb->s_blocksize - 1)) == 0) {
pos ++;
*fsdata = (void *)(unsigned long)flags;
}
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
index = pos >> PAGE_SHIFT;
fs: symlink write_begin allocation context fix With the write_begin/write_end aops, page_symlink was broken because it could no longer pass a GFP_NOFS type mask into the point where the allocations happened. They are done in write_begin, which would always assume that the filesystem can be entered from reclaim. This bug could cause filesystem deadlocks. The funny thing with having a gfp_t mask there is that it doesn't really allow the caller to arbitrarily tinker with the context in which it can be called. It couldn't ever be GFP_ATOMIC, for example, because it needs to take the page lock. The only thing any callers care about is __GFP_FS anyway, so turn that into a single flag. Add a new flag for write_begin, AOP_FLAG_NOFS. Filesystems can now act on this flag in their write_begin function. Change __grab_cache_page to accept a nofs argument as well, to honour that flag (while we're there, change the name to grab_cache_page_write_begin which is more instructive and does away with random leading underscores). This is really a more flexible way to go in the end anyway -- if a filesystem happens to want any extra allocations aside from the pagecache ones in ints write_begin function, it may now use GFP_KERNEL (rather than GFP_NOFS) for common case allocations (eg. ocfs2_alloc_write_ctxt, for a random example). [kosaki.motohiro@jp.fujitsu.com: fix ubifs] [kosaki.motohiro@jp.fujitsu.com: fix fuse] Signed-off-by: Nick Piggin <npiggin@suse.de> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: <stable@kernel.org> [2.6.28.x] Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> [ Cleaned up the calling convention: just pass in the AOP flags untouched to the grab_cache_page_write_begin() function. That just simplifies everybody, and may even allow future expansion of the logic. - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-04 20:00:53 +00:00
page = grab_cache_page_write_begin(mapping, index, flags);
if (!page)
return -ENOMEM;
*pagep = page;
reiserfs_wait_on_write_block(inode->i_sb);
fix_tail_page_for_writing(page);
if (reiserfs_transaction_running(inode->i_sb)) {
struct reiserfs_transaction_handle *th;
th = (struct reiserfs_transaction_handle *)current->
journal_info;
BUG_ON(!th->t_refcount);
BUG_ON(!th->t_trans_id);
old_ref = th->t_refcount;
th->t_refcount++;
}
ret = __block_write_begin(page, pos, len, reiserfs_get_block);
if (ret && reiserfs_transaction_running(inode->i_sb)) {
struct reiserfs_transaction_handle *th = current->journal_info;
/*
* this gets a little ugly. If reiserfs_get_block returned an
* error and left a transacstion running, we've got to close
* it, and we've got to free handle if it was a persistent
* transaction.
*
* But, if we had nested into an existing transaction, we need
* to just drop the ref count on the handle.
*
* If old_ref == 0, the transaction is from reiserfs_get_block,
* and it was a persistent trans. Otherwise, it was nested
* above.
*/
if (th->t_refcount > old_ref) {
if (old_ref)
th->t_refcount--;
else {
int err;
reiserfs_write_lock(inode->i_sb);
err = reiserfs_end_persistent_transaction(th);
reiserfs_write_unlock(inode->i_sb);
if (err)
ret = err;
}
}
}
if (ret) {
unlock_page(page);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
put_page(page);
/* Truncate allocated blocks */
reiserfs_truncate_failed_write(inode);
}
return ret;
}
int __reiserfs_write_begin(struct page *page, unsigned from, unsigned len)
{
struct inode *inode = page->mapping->host;
int ret;
int old_ref = 0;
int depth;
depth = reiserfs_write_unlock_nested(inode->i_sb);
reiserfs_wait_on_write_block(inode->i_sb);
reiserfs_write_lock_nested(inode->i_sb, depth);
reiserfs: kill-the-BKL This patch is an attempt to remove the Bkl based locking scheme from reiserfs and is intended. It is a bit inspired from an old attempt by Peter Zijlstra: http://lkml.indiana.edu/hypermail/linux/kernel/0704.2/2174.html The bkl is heavily used in this filesystem to prevent from concurrent write accesses on the filesystem. Reiserfs makes a deep use of the specific properties of the Bkl: - It can be acqquired recursively by a same task - It is released on the schedule() calls and reacquired when schedule() returns The two properties above are a roadmap for the reiserfs write locking so it's very hard to simply replace it with a common mutex. - We need a recursive-able locking unless we want to restructure several blocks of the code. - We need to identify the sites where the bkl was implictly relaxed (schedule, wait, sync, etc...) so that we can in turn release and reacquire our new lock explicitly. Such implicit releases of the lock are often required to let other resources producer/consumer do their job or we can suffer unexpected starvations or deadlocks. So the new lock that replaces the bkl here is a per superblock mutex with a specific property: it can be acquired recursively by a same task, like the bkl. For such purpose, we integrate a lock owner and a lock depth field on the superblock information structure. The first axis on this patch is to turn reiserfs_write_(un)lock() function into a wrapper to manage this mutex. Also some explicit calls to lock_kernel() have been converted to reiserfs_write_lock() helpers. The second axis is to find the important blocking sites (schedule...(), wait_on_buffer(), sync_dirty_buffer(), etc...) and then apply an explicit release of the write lock on these locations before blocking. Then we can safely wait for those who can give us resources or those who need some. Typically this is a fight between the current writer, the reiserfs workqueue (aka the async commiter) and the pdflush threads. The third axis is a consequence of the second. The write lock is usually on top of a lock dependency chain which can include the journal lock, the flush lock or the commit lock. So it's dangerous to release and trying to reacquire the write lock while we still hold other locks. This is fine with the bkl: T1 T2 lock_kernel() mutex_lock(A) unlock_kernel() // do something lock_kernel() mutex_lock(A) -> already locked by T1 schedule() (and then unlock_kernel()) lock_kernel() mutex_unlock(A) .... This is not fine with a mutex: T1 T2 mutex_lock(write) mutex_lock(A) mutex_unlock(write) // do something mutex_lock(write) mutex_lock(A) -> already locked by T1 schedule() mutex_lock(write) -> already locked by T2 deadlock The solution in this patch is to provide a helper which releases the write lock and sleep a bit if we can't lock a mutex that depend on it. It's another simulation of the bkl behaviour. The last axis is to locate the fs callbacks that are called with the bkl held, according to Documentation/filesystem/Locking. Those are: - reiserfs_remount - reiserfs_fill_super - reiserfs_put_super Reiserfs didn't need to explicitly lock because of the context of these callbacks. But now we must take care of that with the new locking. After this patch, reiserfs suffers from a slight performance regression (for now). On UP, a high volume write with dd reports an average of 27 MB/s instead of 30 MB/s without the patch applied. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Reviewed-by: Ingo Molnar <mingo@elte.hu> Cc: Jeff Mahoney <jeffm@suse.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Bron Gondwana <brong@fastmail.fm> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> LKML-Reference: <1239070789-13354-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-07 02:19:49 +00:00
fix_tail_page_for_writing(page);
if (reiserfs_transaction_running(inode->i_sb)) {
struct reiserfs_transaction_handle *th;
th = (struct reiserfs_transaction_handle *)current->
journal_info;
BUG_ON(!th->t_refcount);
BUG_ON(!th->t_trans_id);
old_ref = th->t_refcount;
th->t_refcount++;
}
ret = __block_write_begin(page, from, len, reiserfs_get_block);
if (ret && reiserfs_transaction_running(inode->i_sb)) {
struct reiserfs_transaction_handle *th = current->journal_info;
/*
* this gets a little ugly. If reiserfs_get_block returned an
* error and left a transacstion running, we've got to close
* it, and we've got to free handle if it was a persistent
* transaction.
*
* But, if we had nested into an existing transaction, we need
* to just drop the ref count on the handle.
*
* If old_ref == 0, the transaction is from reiserfs_get_block,
* and it was a persistent trans. Otherwise, it was nested
* above.
*/
if (th->t_refcount > old_ref) {
if (old_ref)
th->t_refcount--;
else {
int err;
reiserfs_write_lock(inode->i_sb);
err = reiserfs_end_persistent_transaction(th);
reiserfs_write_unlock(inode->i_sb);
if (err)
ret = err;
}
}
}
return ret;
}
static sector_t reiserfs_aop_bmap(struct address_space *as, sector_t block)
{
return generic_block_bmap(as, block, reiserfs_bmap);
}
static int reiserfs_write_end(struct file *file, struct address_space *mapping,
loff_t pos, unsigned len, unsigned copied,
struct page *page, void *fsdata)
{
struct inode *inode = page->mapping->host;
int ret = 0;
int update_sd = 0;
struct reiserfs_transaction_handle *th;
unsigned start;
bool locked = false;
if ((unsigned long)fsdata & AOP_FLAG_CONT_EXPAND)
pos ++;
reiserfs_wait_on_write_block(inode->i_sb);
if (reiserfs_transaction_running(inode->i_sb))
th = current->journal_info;
else
th = NULL;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
start = pos & (PAGE_SIZE - 1);
if (unlikely(copied < len)) {
if (!PageUptodate(page))
copied = 0;
page_zero_new_buffers(page, start + copied, start + len);
}
flush_dcache_page(page);
reiserfs_commit_page(inode, page, start, start + copied);
/*
* generic_commit_write does this for us, but does not update the
* transaction tracking stuff when the size changes. So, we have
* to do the i_size updates here.
*/
if (pos + copied > inode->i_size) {
struct reiserfs_transaction_handle myth;
reiserfs_write_lock(inode->i_sb);
locked = true;
/*
* If the file have grown beyond the border where it
* can have a tail, unmark it as needing a tail
* packing
*/
if ((have_large_tails(inode->i_sb)
&& inode->i_size > i_block_size(inode) * 4)
|| (have_small_tails(inode->i_sb)
&& inode->i_size > i_block_size(inode)))
REISERFS_I(inode)->i_flags &= ~i_pack_on_close_mask;
ret = journal_begin(&myth, inode->i_sb, 1);
if (ret)
goto journal_error;
reiserfs_update_inode_transaction(inode);
inode->i_size = pos + copied;
/*
* this will just nest into our transaction. It's important
* to use mark_inode_dirty so the inode gets pushed around on
* the dirty lists, and so that O_SYNC works as expected
*/
mark_inode_dirty(inode);
reiserfs_update_sd(&myth, inode);
update_sd = 1;
ret = journal_end(&myth);
if (ret)
goto journal_error;
}
if (th) {
if (!locked) {
reiserfs_write_lock(inode->i_sb);
locked = true;
}
if (!update_sd)
mark_inode_dirty(inode);
ret = reiserfs_end_persistent_transaction(th);
if (ret)
goto out;
}
out:
if (locked)
reiserfs_write_unlock(inode->i_sb);
unlock_page(page);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
put_page(page);
if (pos + len > inode->i_size)
reiserfs_truncate_failed_write(inode);
return ret == 0 ? copied : ret;
journal_error:
reiserfs_write_unlock(inode->i_sb);
locked = false;
if (th) {
if (!update_sd)
reiserfs_update_sd(th, inode);
ret = reiserfs_end_persistent_transaction(th);
}
goto out;
}
int reiserfs_commit_write(struct file *f, struct page *page,
unsigned from, unsigned to)
{
struct inode *inode = page->mapping->host;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
loff_t pos = ((loff_t) page->index << PAGE_SHIFT) + to;
int ret = 0;
int update_sd = 0;
struct reiserfs_transaction_handle *th = NULL;
int depth;
depth = reiserfs_write_unlock_nested(inode->i_sb);
reiserfs_wait_on_write_block(inode->i_sb);
reiserfs_write_lock_nested(inode->i_sb, depth);
reiserfs: kill-the-BKL This patch is an attempt to remove the Bkl based locking scheme from reiserfs and is intended. It is a bit inspired from an old attempt by Peter Zijlstra: http://lkml.indiana.edu/hypermail/linux/kernel/0704.2/2174.html The bkl is heavily used in this filesystem to prevent from concurrent write accesses on the filesystem. Reiserfs makes a deep use of the specific properties of the Bkl: - It can be acqquired recursively by a same task - It is released on the schedule() calls and reacquired when schedule() returns The two properties above are a roadmap for the reiserfs write locking so it's very hard to simply replace it with a common mutex. - We need a recursive-able locking unless we want to restructure several blocks of the code. - We need to identify the sites where the bkl was implictly relaxed (schedule, wait, sync, etc...) so that we can in turn release and reacquire our new lock explicitly. Such implicit releases of the lock are often required to let other resources producer/consumer do their job or we can suffer unexpected starvations or deadlocks. So the new lock that replaces the bkl here is a per superblock mutex with a specific property: it can be acquired recursively by a same task, like the bkl. For such purpose, we integrate a lock owner and a lock depth field on the superblock information structure. The first axis on this patch is to turn reiserfs_write_(un)lock() function into a wrapper to manage this mutex. Also some explicit calls to lock_kernel() have been converted to reiserfs_write_lock() helpers. The second axis is to find the important blocking sites (schedule...(), wait_on_buffer(), sync_dirty_buffer(), etc...) and then apply an explicit release of the write lock on these locations before blocking. Then we can safely wait for those who can give us resources or those who need some. Typically this is a fight between the current writer, the reiserfs workqueue (aka the async commiter) and the pdflush threads. The third axis is a consequence of the second. The write lock is usually on top of a lock dependency chain which can include the journal lock, the flush lock or the commit lock. So it's dangerous to release and trying to reacquire the write lock while we still hold other locks. This is fine with the bkl: T1 T2 lock_kernel() mutex_lock(A) unlock_kernel() // do something lock_kernel() mutex_lock(A) -> already locked by T1 schedule() (and then unlock_kernel()) lock_kernel() mutex_unlock(A) .... This is not fine with a mutex: T1 T2 mutex_lock(write) mutex_lock(A) mutex_unlock(write) // do something mutex_lock(write) mutex_lock(A) -> already locked by T1 schedule() mutex_lock(write) -> already locked by T2 deadlock The solution in this patch is to provide a helper which releases the write lock and sleep a bit if we can't lock a mutex that depend on it. It's another simulation of the bkl behaviour. The last axis is to locate the fs callbacks that are called with the bkl held, according to Documentation/filesystem/Locking. Those are: - reiserfs_remount - reiserfs_fill_super - reiserfs_put_super Reiserfs didn't need to explicitly lock because of the context of these callbacks. But now we must take care of that with the new locking. After this patch, reiserfs suffers from a slight performance regression (for now). On UP, a high volume write with dd reports an average of 27 MB/s instead of 30 MB/s without the patch applied. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Reviewed-by: Ingo Molnar <mingo@elte.hu> Cc: Jeff Mahoney <jeffm@suse.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Bron Gondwana <brong@fastmail.fm> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> LKML-Reference: <1239070789-13354-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-07 02:19:49 +00:00
if (reiserfs_transaction_running(inode->i_sb)) {
th = current->journal_info;
}
reiserfs_commit_page(inode, page, from, to);
/*
* generic_commit_write does this for us, but does not update the
* transaction tracking stuff when the size changes. So, we have
* to do the i_size updates here.
*/
if (pos > inode->i_size) {
struct reiserfs_transaction_handle myth;
/*
* If the file have grown beyond the border where it
* can have a tail, unmark it as needing a tail
* packing
*/
if ((have_large_tails(inode->i_sb)
&& inode->i_size > i_block_size(inode) * 4)
|| (have_small_tails(inode->i_sb)
&& inode->i_size > i_block_size(inode)))
REISERFS_I(inode)->i_flags &= ~i_pack_on_close_mask;
ret = journal_begin(&myth, inode->i_sb, 1);
if (ret)
goto journal_error;
reiserfs_update_inode_transaction(inode);
inode->i_size = pos;
/*
* this will just nest into our transaction. It's important
* to use mark_inode_dirty so the inode gets pushed around
* on the dirty lists, and so that O_SYNC works as expected
*/
mark_inode_dirty(inode);
reiserfs_update_sd(&myth, inode);
update_sd = 1;
ret = journal_end(&myth);
if (ret)
goto journal_error;
}
if (th) {
if (!update_sd)
mark_inode_dirty(inode);
ret = reiserfs_end_persistent_transaction(th);
if (ret)
goto out;
}
out:
return ret;
journal_error:
if (th) {
if (!update_sd)
reiserfs_update_sd(th, inode);
ret = reiserfs_end_persistent_transaction(th);
}
return ret;
}
void sd_attrs_to_i_attrs(__u16 sd_attrs, struct inode *inode)
{
if (reiserfs_attrs(inode->i_sb)) {
if (sd_attrs & REISERFS_SYNC_FL)
inode->i_flags |= S_SYNC;
else
inode->i_flags &= ~S_SYNC;
if (sd_attrs & REISERFS_IMMUTABLE_FL)
inode->i_flags |= S_IMMUTABLE;
else
inode->i_flags &= ~S_IMMUTABLE;
if (sd_attrs & REISERFS_APPEND_FL)
inode->i_flags |= S_APPEND;
else
inode->i_flags &= ~S_APPEND;
if (sd_attrs & REISERFS_NOATIME_FL)
inode->i_flags |= S_NOATIME;
else
inode->i_flags &= ~S_NOATIME;
if (sd_attrs & REISERFS_NOTAIL_FL)
REISERFS_I(inode)->i_flags |= i_nopack_mask;
else
REISERFS_I(inode)->i_flags &= ~i_nopack_mask;
}
}
void i_attrs_to_sd_attrs(struct inode *inode, __u16 * sd_attrs)
{
if (reiserfs_attrs(inode->i_sb)) {
if (inode->i_flags & S_IMMUTABLE)
*sd_attrs |= REISERFS_IMMUTABLE_FL;
else
*sd_attrs &= ~REISERFS_IMMUTABLE_FL;
if (inode->i_flags & S_SYNC)
*sd_attrs |= REISERFS_SYNC_FL;
else
*sd_attrs &= ~REISERFS_SYNC_FL;
if (inode->i_flags & S_NOATIME)
*sd_attrs |= REISERFS_NOATIME_FL;
else
*sd_attrs &= ~REISERFS_NOATIME_FL;
if (REISERFS_I(inode)->i_flags & i_nopack_mask)
*sd_attrs |= REISERFS_NOTAIL_FL;
else
*sd_attrs &= ~REISERFS_NOTAIL_FL;
}
}
/*
* decide if this buffer needs to stay around for data logging or ordered
* write purposes
*/
static int invalidatepage_can_drop(struct inode *inode, struct buffer_head *bh)
{
int ret = 1;
struct reiserfs_journal *j = SB_JOURNAL(inode->i_sb);
lock_buffer(bh);
spin_lock(&j->j_dirty_buffers_lock);
if (!buffer_mapped(bh)) {
goto free_jh;
}
/*
* the page is locked, and the only places that log a data buffer
* also lock the page.
*/
if (reiserfs_file_data_log(inode)) {
/*
* very conservative, leave the buffer pinned if
* anyone might need it.
*/
if (buffer_journaled(bh) || buffer_journal_dirty(bh)) {
ret = 0;
}
} else if (buffer_dirty(bh)) {
struct reiserfs_journal_list *jl;
struct reiserfs_jh *jh = bh->b_private;
/*
* why is this safe?
* reiserfs_setattr updates i_size in the on disk
* stat data before allowing vmtruncate to be called.
*
* If buffer was put onto the ordered list for this
* transaction, we know for sure either this transaction
* or an older one already has updated i_size on disk,
* and this ordered data won't be referenced in the file
* if we crash.
*
* if the buffer was put onto the ordered list for an older
* transaction, we need to leave it around
*/
if (jh && (jl = jh->jl)
&& jl != SB_JOURNAL(inode->i_sb)->j_current_jl)
ret = 0;
}
free_jh:
if (ret && bh->b_private) {
reiserfs_free_jh(bh);
}
spin_unlock(&j->j_dirty_buffers_lock);
unlock_buffer(bh);
return ret;
}
/* clm -- taken from fs/buffer.c:block_invalidate_page */
static void reiserfs_invalidatepage(struct page *page, unsigned int offset,
unsigned int length)
{
struct buffer_head *head, *bh, *next;
struct inode *inode = page->mapping->host;
unsigned int curr_off = 0;
unsigned int stop = offset + length;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 12:29:47 +00:00
int partial_page = (offset || length < PAGE_SIZE);
int ret = 1;
BUG_ON(!PageLocked(page));
if (!partial_page)
ClearPageChecked(page);
if (!page_has_buffers(page))
goto out;
head = page_buffers(page);
bh = head;
do {
unsigned int next_off = curr_off + bh->b_size;
next = bh->b_this_page;
if (next_off > stop)
goto out;
/*
* is this block fully invalidated?
*/
if (offset <= curr_off) {
if (invalidatepage_can_drop(inode, bh))
reiserfs_unmap_buffer(bh);
else
ret = 0;
}
curr_off = next_off;
bh = next;
} while (bh != head);
/*
* We release buffers only if the entire page is being invalidated.
* The get_block cached value has been unconditionally invalidated,
* so real IO is not possible anymore.
*/
if (!partial_page && ret) {
ret = try_to_release_page(page, 0);
/* maybe should BUG_ON(!ret); - neilb */
}
out:
return;
}
static int reiserfs_set_page_dirty(struct page *page)
{
struct inode *inode = page->mapping->host;
if (reiserfs_file_data_log(inode)) {
SetPageChecked(page);
return __set_page_dirty_nobuffers(page);
}
return __set_page_dirty_buffers(page);
}
/*
* Returns 1 if the page's buffers were dropped. The page is locked.
*
* Takes j_dirty_buffers_lock to protect the b_assoc_buffers list_heads
* in the buffers at page_buffers(page).
*
* even in -o notail mode, we can't be sure an old mount without -o notail
* didn't create files with tails.
*/
static int reiserfs_releasepage(struct page *page, gfp_t unused_gfp_flags)
{
struct inode *inode = page->mapping->host;
struct reiserfs_journal *j = SB_JOURNAL(inode->i_sb);
struct buffer_head *head;
struct buffer_head *bh;
int ret = 1;
WARN_ON(PageChecked(page));
spin_lock(&j->j_dirty_buffers_lock);
head = page_buffers(page);
bh = head;
do {
if (bh->b_private) {
if (!buffer_dirty(bh) && !buffer_locked(bh)) {
reiserfs_free_jh(bh);
} else {
ret = 0;
break;
}
}
bh = bh->b_this_page;
} while (bh != head);
if (ret)
ret = try_to_free_buffers(page);
spin_unlock(&j->j_dirty_buffers_lock);
return ret;
}
/*
* We thank Mingming Cao for helping us understand in great detail what
* to do in this section of the code.
*/
static ssize_t reiserfs_direct_IO(struct kiocb *iocb, struct iov_iter *iter)
{
struct file *file = iocb->ki_filp;
struct inode *inode = file->f_mapping->host;
size_t count = iov_iter_count(iter);
ssize_t ret;
ret = blockdev_direct_IO(iocb, inode, iter,
reiserfs_get_blocks_direct_io);
/*
* In case of error extending write may have instantiated a few
* blocks outside i_size. Trim these off again.
*/
if (unlikely(iov_iter_rw(iter) == WRITE && ret < 0)) {
loff_t isize = i_size_read(inode);
loff_t end = iocb->ki_pos + count;
if ((end > isize) && inode_newsize_ok(inode, isize) == 0) {
truncate_setsize(inode, isize);
reiserfs_vfs_truncate_file(inode);
}
}
return ret;
}
int reiserfs_setattr(struct dentry *dentry, struct iattr *attr)
{
struct inode *inode = d_inode(dentry);
unsigned int ia_valid;
reiserfs: Fix recursive lock on lchown On chown, reiserfs will call reiserfs_setattr() to change the owner of the given inode, but it may also recursively call reiserfs_setattr() to propagate the owner change to the private xattr files for this inode. Hence, the reiserfs lock may be acquired twice which is not wanted as reiserfs_setattr() calls journal_begin() that is going to try to relax the lock in order to safely acquire the journal mutex. Using reiserfs_write_lock_once() from reiserfs_setattr() solves the problem. This fixes the following warning, that precedes a lockdep report. WARNING: at fs/reiserfs/lock.c:95 reiserfs_lock_check_recursive+0x3f/0x50() Hardware name: MS-7418 Unwanted recursive reiserfs lock! Pid: 4189, comm: fsstress Not tainted 2.6.33-rc2-tip-atom+ #195 Call Trace: [<c1178bff>] ? reiserfs_lock_check_recursive+0x3f/0x50 [<c1178bff>] ? reiserfs_lock_check_recursive+0x3f/0x50 [<c103f7ac>] warn_slowpath_common+0x6c/0xc0 [<c1178bff>] ? reiserfs_lock_check_recursive+0x3f/0x50 [<c103f84b>] warn_slowpath_fmt+0x2b/0x30 [<c1178bff>] reiserfs_lock_check_recursive+0x3f/0x50 [<c1172ae3>] do_journal_begin_r+0x83/0x350 [<c1172f2d>] journal_begin+0x7d/0x140 [<c106509a>] ? in_group_p+0x2a/0x30 [<c10fda71>] ? inode_change_ok+0x91/0x140 [<c115007d>] reiserfs_setattr+0x15d/0x2e0 [<c10f9bf3>] ? dput+0xe3/0x140 [<c1465adc>] ? _raw_spin_unlock+0x2c/0x50 [<c117831d>] chown_one_xattr+0xd/0x10 [<c11780a3>] reiserfs_for_each_xattr+0x113/0x2c0 [<c1178310>] ? chown_one_xattr+0x0/0x10 [<c14641e9>] ? mutex_lock_nested+0x2a9/0x350 [<c117826f>] reiserfs_chown_xattrs+0x1f/0x60 [<c106509a>] ? in_group_p+0x2a/0x30 [<c10fda71>] ? inode_change_ok+0x91/0x140 [<c1150046>] reiserfs_setattr+0x126/0x2e0 [<c1177c20>] ? reiserfs_getxattr+0x0/0x90 [<c11b0d57>] ? cap_inode_need_killpriv+0x37/0x50 [<c10fde01>] notify_change+0x151/0x330 [<c10e659f>] chown_common+0x6f/0x90 [<c10e67bd>] sys_lchown+0x6d/0x80 [<c1002ccc>] sysenter_do_call+0x12/0x32 ---[ end trace 7c2b77224c1442fc ]--- Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Christian Kujau <lists@nerdbynature.de> Cc: Alexander Beregalov <a.beregalov@gmail.com> Cc: Chris Mason <chris.mason@oracle.com> Cc: Ingo Molnar <mingo@elte.hu>
2010-01-04 21:04:01 +00:00
int error;
error = setattr_prepare(dentry, attr);
if (error)
return error;
/* must be turned off for recursive notify_change calls */
ia_valid = attr->ia_valid &= ~(ATTR_KILL_SUID|ATTR_KILL_SGID);
if (is_quota_modification(inode, attr)) {
error = dquot_initialize(inode);
if (error)
return error;
}
reiserfs_write_lock(inode->i_sb);
if (attr->ia_valid & ATTR_SIZE) {
/*
* version 2 items will be caught by the s_maxbytes check
* done for us in vmtruncate
*/
if (get_inode_item_key_version(inode) == KEY_FORMAT_3_5 &&
attr->ia_size > MAX_NON_LFS) {
reiserfs_write_unlock(inode->i_sb);
error = -EFBIG;
goto out;
}
inode_dio_wait(inode);
/* fill in hole pointers in the expanding truncate case. */
if (attr->ia_size > inode->i_size) {
error = generic_cont_expand_simple(inode, attr->ia_size);
if (REISERFS_I(inode)->i_prealloc_count > 0) {
int err;
struct reiserfs_transaction_handle th;
/* we're changing at most 2 bitmaps, inode + super */
err = journal_begin(&th, inode->i_sb, 4);
if (!err) {
reiserfs_discard_prealloc(&th, inode);
err = journal_end(&th);
}
if (err)
error = err;
}
if (error) {
reiserfs_write_unlock(inode->i_sb);
goto out;
}
/*
* file size is changed, ctime and mtime are
* to be updated
*/
attr->ia_valid |= (ATTR_MTIME | ATTR_CTIME);
}
}
reiserfs_write_unlock(inode->i_sb);
if ((((attr->ia_valid & ATTR_UID) && (from_kuid(&init_user_ns, attr->ia_uid) & ~0xffff)) ||
((attr->ia_valid & ATTR_GID) && (from_kgid(&init_user_ns, attr->ia_gid) & ~0xffff))) &&
(get_inode_sd_version(inode) == STAT_DATA_V1)) {
/* stat data of format v3.5 has 16 bit uid and gid */
error = -EINVAL;
goto out;
}
if ((ia_valid & ATTR_UID && !uid_eq(attr->ia_uid, inode->i_uid)) ||
(ia_valid & ATTR_GID && !gid_eq(attr->ia_gid, inode->i_gid))) {
struct reiserfs_transaction_handle th;
int jbegin_count =
2 *
(REISERFS_QUOTA_INIT_BLOCKS(inode->i_sb) +
REISERFS_QUOTA_DEL_BLOCKS(inode->i_sb)) +
2;
error = reiserfs_chown_xattrs(inode, attr);
if (error)
return error;
/*
* (user+group)*(old+new) structure - we count quota
* info and , inode write (sb, inode)
*/
reiserfs_write_lock(inode->i_sb);
error = journal_begin(&th, inode->i_sb, jbegin_count);
reiserfs_write_unlock(inode->i_sb);
if (error)
goto out;
error = dquot_transfer(inode, attr);
reiserfs_write_lock(inode->i_sb);
if (error) {
journal_end(&th);
reiserfs_write_unlock(inode->i_sb);
goto out;
reiserfs: Relax the lock before truncating pages While truncating a file, reiserfs_setattr() calls inode_setattr() that will truncate the mapping for the given inode, but for that it needs the pages locks. In order to release these, the owners need the reiserfs lock to complete their jobs. But they can't, as we don't release it before calling inode_setattr(). We need to do that to fix the following softlockups: INFO: task flush-8:0:2149 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. flush-8:0 D f51af998 0 2149 2 0x00000000 f51af9ac 00000092 00000002 f51af998 c2803304 00000000 c1894ad0 010f3000 f51af9cc c1462604 c189ef80 f51af974 c1710304 f715b450 f715b5ec c2807c40 00000000 0005bb00 c2803320 c102c55b c1710304 c2807c50 c2803304 00000246 Call Trace: [<c1462604>] ? schedule+0x434/0xb20 [<c102c55b>] ? resched_task+0x4b/0x70 [<c106fa22>] ? mark_held_locks+0x62/0x80 [<c146414d>] ? mutex_lock_nested+0x1fd/0x350 [<c14640b9>] mutex_lock_nested+0x169/0x350 [<c1178cde>] ? reiserfs_write_lock+0x2e/0x40 [<c1178cde>] reiserfs_write_lock+0x2e/0x40 [<c11719a2>] do_journal_end+0xc2/0xe70 [<c1172912>] journal_end+0xb2/0x120 [<c11686b3>] ? pathrelse+0x33/0xb0 [<c11729e4>] reiserfs_end_persistent_transaction+0x64/0x70 [<c1153caa>] reiserfs_get_block+0x12ba/0x15f0 [<c106fa22>] ? mark_held_locks+0x62/0x80 [<c1154b24>] reiserfs_writepage+0xa74/0xe80 [<c1465a27>] ? _raw_spin_unlock_irq+0x27/0x50 [<c11f3d25>] ? radix_tree_gang_lookup_tag_slot+0x95/0xc0 [<c10b5377>] ? find_get_pages_tag+0x127/0x1a0 [<c106fa22>] ? mark_held_locks+0x62/0x80 [<c106fcd4>] ? trace_hardirqs_on_caller+0x124/0x170 [<c10bc1e0>] __writepage+0x10/0x40 [<c10bc9ab>] write_cache_pages+0x16b/0x320 [<c10bc1d0>] ? __writepage+0x0/0x40 [<c10bcb88>] generic_writepages+0x28/0x40 [<c10bcbd5>] do_writepages+0x35/0x40 [<c11059f7>] writeback_single_inode+0xc7/0x330 [<c11067b2>] writeback_inodes_wb+0x2c2/0x490 [<c1106a86>] wb_writeback+0x106/0x1b0 [<c1106cf6>] wb_do_writeback+0x106/0x1e0 [<c1106c18>] ? wb_do_writeback+0x28/0x1e0 [<c1106e0a>] bdi_writeback_task+0x3a/0xb0 [<c10cbb13>] bdi_start_fn+0x63/0xc0 [<c10cbab0>] ? bdi_start_fn+0x0/0xc0 [<c105d1f4>] kthread+0x74/0x80 [<c105d180>] ? kthread+0x0/0x80 [<c100327a>] kernel_thread_helper+0x6/0x10 3 locks held by flush-8:0/2149: #0: (&type->s_umount_key#30){+++++.}, at: [<c110676f>] writeback_inodes_wb+0x27f/0x490 #1: (&journal->j_mutex){+.+...}, at: [<c117199a>] do_journal_end+0xba/0xe70 #2: (&REISERFS_SB(s)->lock){+.+.+.}, at: [<c1178cde>] reiserfs_write_lock+0x2e/0x40 INFO: task fstest:3813 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. fstest D 00000002 0 3813 3812 0x00000000 f5103c94 00000082 f5103c40 00000002 f5ad5450 00000007 f5103c28 011f3000 00000006 f5ad5450 c10bb005 00000480 c1710304 f5ad5450 f5ad55ec c2907c40 00000001 f5ad5450 f5103c74 00000046 00000002 f5ad5450 00000007 f5103c6c Call Trace: [<c10bb005>] ? free_hot_cold_page+0x1d5/0x280 [<c1462d64>] io_schedule+0x74/0xc0 [<c10b5a45>] sync_page+0x35/0x60 [<c146325a>] __wait_on_bit_lock+0x4a/0x90 [<c10b5a10>] ? sync_page+0x0/0x60 [<c10b59e5>] __lock_page+0x85/0x90 [<c105d660>] ? wake_bit_function+0x0/0x60 [<c10bf654>] truncate_inode_pages_range+0x1e4/0x2d0 [<c10bf75f>] truncate_inode_pages+0x1f/0x30 [<c10bf7cf>] truncate_pagecache+0x5f/0xa0 [<c10bf86a>] vmtruncate+0x5a/0x70 [<c10fdb7d>] inode_setattr+0x5d/0x190 [<c1150117>] reiserfs_setattr+0x1f7/0x2f0 [<c1464569>] ? down_write+0x49/0x70 [<c10fde01>] notify_change+0x151/0x330 [<c10e6f3d>] do_truncate+0x6d/0xa0 [<c10f4ce2>] do_filp_open+0x9a2/0xcf0 [<c1465aec>] ? _raw_spin_unlock+0x2c/0x50 [<c10fec50>] ? alloc_fd+0xe0/0x100 [<c10e602d>] do_sys_open+0x6d/0x130 [<c1002cfb>] ? sysenter_exit+0xf/0x16 [<c10e615e>] sys_open+0x2e/0x40 [<c1002ccc>] sysenter_do_call+0x12/0x32 3 locks held by fstest/3813: #0: (&sb->s_type->i_mutex_key#4){+.+.+.}, at: [<c10e6f33>] do_truncate+0x63/0xa0 #1: (&sb->s_type->i_alloc_sem_key#3){+.+.+.}, at: [<c10fdf07>] notify_change+0x257/0x330 #2: (&REISERFS_SB(s)->lock){+.+.+.}, at: [<c1178c8e>] reiserfs_write_lock_once+0x2e/0x50 Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Christian Kujau <lists@nerdbynature.de> Cc: Alexander Beregalov <a.beregalov@gmail.com> Cc: Chris Mason <chris.mason@oracle.com> Cc: Ingo Molnar <mingo@elte.hu>
2010-01-04 23:15:38 +00:00
}
/*
* Update corresponding info in inode so that everything
* is in one transaction
*/
if (attr->ia_valid & ATTR_UID)
inode->i_uid = attr->ia_uid;
if (attr->ia_valid & ATTR_GID)
inode->i_gid = attr->ia_gid;
mark_inode_dirty(inode);
error = journal_end(&th);
reiserfs_write_unlock(inode->i_sb);
if (error)
goto out;
}
if ((attr->ia_valid & ATTR_SIZE) &&
attr->ia_size != i_size_read(inode)) {
error = inode_newsize_ok(inode, attr->ia_size);
if (!error) {
/*
* Could race against reiserfs_file_release
* if called from NFS, so take tailpack mutex.
*/
mutex_lock(&REISERFS_I(inode)->tailpack);
truncate_setsize(inode, attr->ia_size);
reiserfs_truncate_file(inode, 1);
mutex_unlock(&REISERFS_I(inode)->tailpack);
}
}
if (!error) {
setattr_copy(inode, attr);
mark_inode_dirty(inode);
}
if (!error && reiserfs_posixacl(inode->i_sb)) {
if (attr->ia_valid & ATTR_MODE)
error = reiserfs_acl_chmod(inode);
}
out:
return error;
}
const struct address_space_operations reiserfs_address_space_operations = {
.writepage = reiserfs_writepage,
.readpage = reiserfs_readpage,
.readpages = reiserfs_readpages,
.releasepage = reiserfs_releasepage,
.invalidatepage = reiserfs_invalidatepage,
.write_begin = reiserfs_write_begin,
.write_end = reiserfs_write_end,
.bmap = reiserfs_aop_bmap,
.direct_IO = reiserfs_direct_IO,
.set_page_dirty = reiserfs_set_page_dirty,
};