linux/drivers/firmware/dell_rbu.c

746 lines
19 KiB
C
Raw Normal View History

/*
* dell_rbu.c
* Bios Update driver for Dell systems
* Author: Dell Inc
* Abhay Salunke <abhay_salunke@dell.com>
*
* Copyright (C) 2005 Dell Inc.
*
* Remote BIOS Update (rbu) driver is used for updating DELL BIOS by
* creating entries in the /sys file systems on Linux 2.6 and higher
* kernels. The driver supports two mechanism to update the BIOS namely
* contiguous and packetized. Both these methods still require having some
* application to set the CMOS bit indicating the BIOS to update itself
* after a reboot.
*
* Contiguous method:
* This driver writes the incoming data in a monolithic image by allocating
* contiguous physical pages large enough to accommodate the incoming BIOS
* image size.
*
* Packetized method:
* The driver writes the incoming packet image by allocating a new packet
* on every time the packet data is written. This driver requires an
* application to break the BIOS image in to fixed sized packet chunks.
*
* See Documentation/dell_rbu.txt for more info.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License v2.0 as published by
* the Free Software Foundation
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/init.h>
#include <linux/module.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/blkdev.h>
#include <linux/platform_device.h>
#include <linux/spinlock.h>
#include <linux/moduleparam.h>
#include <linux/firmware.h>
#include <linux/dma-mapping.h>
MODULE_AUTHOR("Abhay Salunke <abhay_salunke@dell.com>");
MODULE_DESCRIPTION("Driver for updating BIOS image on DELL systems");
MODULE_LICENSE("GPL");
[PATCH] dell_rbu: fix Bug 5854 This fixes http://bugzilla.kernel.org/show_bug.cgi?id=5854 Root cause: The dell_rbu driver creates entries in /sys/class/firmware/dell_rbu/ by calling request_firmware_nowait (without hotplug ) this function inturn starts a kernel thread which creates the entries in /sys/class/firmware/dell_rbu/loading , data and the thread waits on the user action to return control back to the callback fucntion of dell_rbu. The thread calls wait_on_completion which puts it in a D state until the user action happens. If there is no user action happening the load average goes up as the thread D state is taken in to account. Also after downloading the BIOS image the enrties go away momentarily but they are recreated from the callback function in dell_rbu. This causes the thread to get recreated causing the load average to permenently stay around 1. Fix: The dell_rbu also creates the entry /sys/devices/platform/dell_rbu/image_type at driver load time. The image type by default is mono if required the user can echo packet to image_type to make the BIOS update mechanism using packets. Also by echoing init in to image_type the /sys/class/firmware/dell_rbu entries can be created. The driver code was changed to not create /sys/class/firmware/dell_rbu entries during load time, and also to not create the above entries from the callback function. The entries are only created by echoing init to /sys/devices/platform/dell_rbu/image_type The user now needs to create the entries to download the image monolithic or packet. This fixes the issue since the kernel thread only is created when ever the user is ready to download the BIOS image; this minimizes the life span of the kernel thread and the load average goes back to normal. Signed off by Abhay Salunke <abhay_salunke@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-14 21:21:14 +00:00
MODULE_VERSION("3.2");
#define BIOS_SCAN_LIMIT 0xffffffff
#define MAX_IMAGE_LENGTH 16
static struct _rbu_data {
void *image_update_buffer;
unsigned long image_update_buffer_size;
unsigned long bios_image_size;
int image_update_ordernum;
int dma_alloc;
spinlock_t lock;
unsigned long packet_read_count;
unsigned long num_packets;
unsigned long packetsize;
[PATCH] dell_rbu: changes in packet update mechanism In the current dell_rbu code ver 2.0 the packet update mechanism makes the user app dump every individual packet in to the driver. This adds in efficiency as every packet update makes the /sys/class/firmware/dell_rbu/loading and data files to disappear and reappear again. Thus the user app needs to wait for the files to reappear to dump another packet. This slows down the packet update tremendously in case of large number of packets. I am submitting a new patch for dell_rbu which will change the way we do packet updates; In the new method the user app will create a new single file which has already packetized the rbu image and all the packets are now staged in this file. This driver also creates a new entry in /sys/devices/platform/dell_rbu/packet_size ; the user needs to echo the packet size here before downloading the packet file. The user should do the following: create one single file which has all the packets stacked together. echo the packet size in to /sys/devices/platform/dell_rbu/packet_size. echo 1 > /sys/class/firmware/dell_rbu/loading cat the packetfile > /sys/class/firmware/dell_rbu/data echo 0 > /sys/class/firmware/dell_rbu/loading The driver takes the file which came through /sys/class/firmware/dell_rbu/data and takes chunks of paket_size data from it and place in contiguous memory. This makes packet update process very efficient and fast. As all the packet update happens in one single operation. The user can still read back the downloaded file from /sys/devices/platform/dell_rbu/data. Signed-off-by: Abhay Salunke <abhay_salunke@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-11 15:29:02 +00:00
unsigned long imagesize;
int entry_created;
} rbu_data;
static char image_type[MAX_IMAGE_LENGTH + 1] = "mono";
module_param_string(image_type, image_type, sizeof (image_type), 0);
[PATCH] dell_rbu: changes in packet update mechanism In the current dell_rbu code ver 2.0 the packet update mechanism makes the user app dump every individual packet in to the driver. This adds in efficiency as every packet update makes the /sys/class/firmware/dell_rbu/loading and data files to disappear and reappear again. Thus the user app needs to wait for the files to reappear to dump another packet. This slows down the packet update tremendously in case of large number of packets. I am submitting a new patch for dell_rbu which will change the way we do packet updates; In the new method the user app will create a new single file which has already packetized the rbu image and all the packets are now staged in this file. This driver also creates a new entry in /sys/devices/platform/dell_rbu/packet_size ; the user needs to echo the packet size here before downloading the packet file. The user should do the following: create one single file which has all the packets stacked together. echo the packet size in to /sys/devices/platform/dell_rbu/packet_size. echo 1 > /sys/class/firmware/dell_rbu/loading cat the packetfile > /sys/class/firmware/dell_rbu/data echo 0 > /sys/class/firmware/dell_rbu/loading The driver takes the file which came through /sys/class/firmware/dell_rbu/data and takes chunks of paket_size data from it and place in contiguous memory. This makes packet update process very efficient and fast. As all the packet update happens in one single operation. The user can still read back the downloaded file from /sys/devices/platform/dell_rbu/data. Signed-off-by: Abhay Salunke <abhay_salunke@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-11 15:29:02 +00:00
MODULE_PARM_DESC(image_type,
"BIOS image type. choose- mono or packet or init");
static unsigned long allocation_floor = 0x100000;
module_param(allocation_floor, ulong, 0644);
MODULE_PARM_DESC(allocation_floor,
"Minimum address for allocations when using Packet mode");
struct packet_data {
struct list_head list;
size_t length;
void *data;
int ordernum;
};
static struct packet_data packet_data_head;
static struct platform_device *rbu_device;
static int context;
static dma_addr_t dell_rbu_dmaaddr;
static void init_packet_head(void)
{
INIT_LIST_HEAD(&packet_data_head.list);
rbu_data.packet_read_count = 0;
rbu_data.num_packets = 0;
rbu_data.packetsize = 0;
[PATCH] dell_rbu: changes in packet update mechanism In the current dell_rbu code ver 2.0 the packet update mechanism makes the user app dump every individual packet in to the driver. This adds in efficiency as every packet update makes the /sys/class/firmware/dell_rbu/loading and data files to disappear and reappear again. Thus the user app needs to wait for the files to reappear to dump another packet. This slows down the packet update tremendously in case of large number of packets. I am submitting a new patch for dell_rbu which will change the way we do packet updates; In the new method the user app will create a new single file which has already packetized the rbu image and all the packets are now staged in this file. This driver also creates a new entry in /sys/devices/platform/dell_rbu/packet_size ; the user needs to echo the packet size here before downloading the packet file. The user should do the following: create one single file which has all the packets stacked together. echo the packet size in to /sys/devices/platform/dell_rbu/packet_size. echo 1 > /sys/class/firmware/dell_rbu/loading cat the packetfile > /sys/class/firmware/dell_rbu/data echo 0 > /sys/class/firmware/dell_rbu/loading The driver takes the file which came through /sys/class/firmware/dell_rbu/data and takes chunks of paket_size data from it and place in contiguous memory. This makes packet update process very efficient and fast. As all the packet update happens in one single operation. The user can still read back the downloaded file from /sys/devices/platform/dell_rbu/data. Signed-off-by: Abhay Salunke <abhay_salunke@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-11 15:29:02 +00:00
rbu_data.imagesize = 0;
}
[PATCH] dell_rbu: changes in packet update mechanism In the current dell_rbu code ver 2.0 the packet update mechanism makes the user app dump every individual packet in to the driver. This adds in efficiency as every packet update makes the /sys/class/firmware/dell_rbu/loading and data files to disappear and reappear again. Thus the user app needs to wait for the files to reappear to dump another packet. This slows down the packet update tremendously in case of large number of packets. I am submitting a new patch for dell_rbu which will change the way we do packet updates; In the new method the user app will create a new single file which has already packetized the rbu image and all the packets are now staged in this file. This driver also creates a new entry in /sys/devices/platform/dell_rbu/packet_size ; the user needs to echo the packet size here before downloading the packet file. The user should do the following: create one single file which has all the packets stacked together. echo the packet size in to /sys/devices/platform/dell_rbu/packet_size. echo 1 > /sys/class/firmware/dell_rbu/loading cat the packetfile > /sys/class/firmware/dell_rbu/data echo 0 > /sys/class/firmware/dell_rbu/loading The driver takes the file which came through /sys/class/firmware/dell_rbu/data and takes chunks of paket_size data from it and place in contiguous memory. This makes packet update process very efficient and fast. As all the packet update happens in one single operation. The user can still read back the downloaded file from /sys/devices/platform/dell_rbu/data. Signed-off-by: Abhay Salunke <abhay_salunke@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-11 15:29:02 +00:00
static int create_packet(void *data, size_t length)
{
struct packet_data *newpacket;
int ordernum = 0;
int retval = 0;
unsigned int packet_array_size = 0;
void **invalid_addr_packet_array = NULL;
void *packet_data_temp_buf = NULL;
unsigned int idx = 0;
pr_debug("create_packet: entry \n");
if (!rbu_data.packetsize) {
pr_debug("create_packet: packetsize not specified\n");
retval = -EINVAL;
goto out_noalloc;
}
spin_unlock(&rbu_data.lock);
newpacket = kzalloc(sizeof (struct packet_data), GFP_KERNEL);
if (!newpacket) {
printk(KERN_WARNING
"dell_rbu:%s: failed to allocate new "
"packet\n", __func__);
retval = -ENOMEM;
spin_lock(&rbu_data.lock);
goto out_noalloc;
}
ordernum = get_order(length);
/*
* BIOS errata mean we cannot allocate packets below 1MB or they will
* be overwritten by BIOS.
*
* array to temporarily hold packets
* that are below the allocation floor
*
* NOTE: very simplistic because we only need the floor to be at 1MB
* due to BIOS errata. This shouldn't be used for higher floors
* or you will run out of mem trying to allocate the array.
*/
packet_array_size = max(
(unsigned int)(allocation_floor / rbu_data.packetsize),
(unsigned int)1);
invalid_addr_packet_array = kzalloc(packet_array_size * sizeof(void*),
GFP_KERNEL);
if (!invalid_addr_packet_array) {
printk(KERN_WARNING
"dell_rbu:%s: failed to allocate "
"invalid_addr_packet_array \n",
__func__);
retval = -ENOMEM;
spin_lock(&rbu_data.lock);
goto out_alloc_packet;
}
while (!packet_data_temp_buf) {
packet_data_temp_buf = (unsigned char *)
__get_free_pages(GFP_KERNEL, ordernum);
if (!packet_data_temp_buf) {
printk(KERN_WARNING
"dell_rbu:%s: failed to allocate new "
"packet\n", __func__);
retval = -ENOMEM;
spin_lock(&rbu_data.lock);
goto out_alloc_packet_array;
}
if ((unsigned long)virt_to_phys(packet_data_temp_buf)
< allocation_floor) {
pr_debug("packet 0x%lx below floor at 0x%lx.\n",
(unsigned long)virt_to_phys(
packet_data_temp_buf),
allocation_floor);
invalid_addr_packet_array[idx++] = packet_data_temp_buf;
packet_data_temp_buf = NULL;
}
}
spin_lock(&rbu_data.lock);
newpacket->data = packet_data_temp_buf;
pr_debug("create_packet: newpacket at physical addr %lx\n",
(unsigned long)virt_to_phys(newpacket->data));
/* packets may not have fixed size */
newpacket->length = length;
newpacket->ordernum = ordernum;
++rbu_data.num_packets;
/* initialize the newly created packet headers */
INIT_LIST_HEAD(&newpacket->list);
list_add_tail(&newpacket->list, &packet_data_head.list);
[PATCH] dell_rbu: changes in packet update mechanism In the current dell_rbu code ver 2.0 the packet update mechanism makes the user app dump every individual packet in to the driver. This adds in efficiency as every packet update makes the /sys/class/firmware/dell_rbu/loading and data files to disappear and reappear again. Thus the user app needs to wait for the files to reappear to dump another packet. This slows down the packet update tremendously in case of large number of packets. I am submitting a new patch for dell_rbu which will change the way we do packet updates; In the new method the user app will create a new single file which has already packetized the rbu image and all the packets are now staged in this file. This driver also creates a new entry in /sys/devices/platform/dell_rbu/packet_size ; the user needs to echo the packet size here before downloading the packet file. The user should do the following: create one single file which has all the packets stacked together. echo the packet size in to /sys/devices/platform/dell_rbu/packet_size. echo 1 > /sys/class/firmware/dell_rbu/loading cat the packetfile > /sys/class/firmware/dell_rbu/data echo 0 > /sys/class/firmware/dell_rbu/loading The driver takes the file which came through /sys/class/firmware/dell_rbu/data and takes chunks of paket_size data from it and place in contiguous memory. This makes packet update process very efficient and fast. As all the packet update happens in one single operation. The user can still read back the downloaded file from /sys/devices/platform/dell_rbu/data. Signed-off-by: Abhay Salunke <abhay_salunke@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-11 15:29:02 +00:00
memcpy(newpacket->data, data, length);
pr_debug("create_packet: exit \n");
out_alloc_packet_array:
/* always free packet array */
for (;idx>0;idx--) {
pr_debug("freeing unused packet below floor 0x%lx.\n",
(unsigned long)virt_to_phys(
invalid_addr_packet_array[idx-1]));
free_pages((unsigned long)invalid_addr_packet_array[idx-1],
ordernum);
}
kfree(invalid_addr_packet_array);
out_alloc_packet:
/* if error, free data */
if (retval)
kfree(newpacket);
out_noalloc:
return retval;
}
static int packetize_data(const u8 *data, size_t length)
{
int rc = 0;
[PATCH] dell_rbu: changes in packet update mechanism In the current dell_rbu code ver 2.0 the packet update mechanism makes the user app dump every individual packet in to the driver. This adds in efficiency as every packet update makes the /sys/class/firmware/dell_rbu/loading and data files to disappear and reappear again. Thus the user app needs to wait for the files to reappear to dump another packet. This slows down the packet update tremendously in case of large number of packets. I am submitting a new patch for dell_rbu which will change the way we do packet updates; In the new method the user app will create a new single file which has already packetized the rbu image and all the packets are now staged in this file. This driver also creates a new entry in /sys/devices/platform/dell_rbu/packet_size ; the user needs to echo the packet size here before downloading the packet file. The user should do the following: create one single file which has all the packets stacked together. echo the packet size in to /sys/devices/platform/dell_rbu/packet_size. echo 1 > /sys/class/firmware/dell_rbu/loading cat the packetfile > /sys/class/firmware/dell_rbu/data echo 0 > /sys/class/firmware/dell_rbu/loading The driver takes the file which came through /sys/class/firmware/dell_rbu/data and takes chunks of paket_size data from it and place in contiguous memory. This makes packet update process very efficient and fast. As all the packet update happens in one single operation. The user can still read back the downloaded file from /sys/devices/platform/dell_rbu/data. Signed-off-by: Abhay Salunke <abhay_salunke@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-11 15:29:02 +00:00
int done = 0;
int packet_length;
u8 *temp;
u8 *end = (u8 *) data + length;
pr_debug("packetize_data: data length %zd\n", length);
[PATCH] dell_rbu: changes in packet update mechanism In the current dell_rbu code ver 2.0 the packet update mechanism makes the user app dump every individual packet in to the driver. This adds in efficiency as every packet update makes the /sys/class/firmware/dell_rbu/loading and data files to disappear and reappear again. Thus the user app needs to wait for the files to reappear to dump another packet. This slows down the packet update tremendously in case of large number of packets. I am submitting a new patch for dell_rbu which will change the way we do packet updates; In the new method the user app will create a new single file which has already packetized the rbu image and all the packets are now staged in this file. This driver also creates a new entry in /sys/devices/platform/dell_rbu/packet_size ; the user needs to echo the packet size here before downloading the packet file. The user should do the following: create one single file which has all the packets stacked together. echo the packet size in to /sys/devices/platform/dell_rbu/packet_size. echo 1 > /sys/class/firmware/dell_rbu/loading cat the packetfile > /sys/class/firmware/dell_rbu/data echo 0 > /sys/class/firmware/dell_rbu/loading The driver takes the file which came through /sys/class/firmware/dell_rbu/data and takes chunks of paket_size data from it and place in contiguous memory. This makes packet update process very efficient and fast. As all the packet update happens in one single operation. The user can still read back the downloaded file from /sys/devices/platform/dell_rbu/data. Signed-off-by: Abhay Salunke <abhay_salunke@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-11 15:29:02 +00:00
if (!rbu_data.packetsize) {
printk(KERN_WARNING
"dell_rbu: packetsize not specified\n");
return -EIO;
}
[PATCH] dell_rbu: changes in packet update mechanism In the current dell_rbu code ver 2.0 the packet update mechanism makes the user app dump every individual packet in to the driver. This adds in efficiency as every packet update makes the /sys/class/firmware/dell_rbu/loading and data files to disappear and reappear again. Thus the user app needs to wait for the files to reappear to dump another packet. This slows down the packet update tremendously in case of large number of packets. I am submitting a new patch for dell_rbu which will change the way we do packet updates; In the new method the user app will create a new single file which has already packetized the rbu image and all the packets are now staged in this file. This driver also creates a new entry in /sys/devices/platform/dell_rbu/packet_size ; the user needs to echo the packet size here before downloading the packet file. The user should do the following: create one single file which has all the packets stacked together. echo the packet size in to /sys/devices/platform/dell_rbu/packet_size. echo 1 > /sys/class/firmware/dell_rbu/loading cat the packetfile > /sys/class/firmware/dell_rbu/data echo 0 > /sys/class/firmware/dell_rbu/loading The driver takes the file which came through /sys/class/firmware/dell_rbu/data and takes chunks of paket_size data from it and place in contiguous memory. This makes packet update process very efficient and fast. As all the packet update happens in one single operation. The user can still read back the downloaded file from /sys/devices/platform/dell_rbu/data. Signed-off-by: Abhay Salunke <abhay_salunke@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-11 15:29:02 +00:00
temp = (u8 *) data;
/* packetize the hunk */
while (!done) {
if ((temp + rbu_data.packetsize) < end)
packet_length = rbu_data.packetsize;
else {
/* this is the last packet */
packet_length = end - temp;
done = 1;
}
if ((rc = create_packet(temp, packet_length)))
return rc;
[PATCH] dell_rbu: changes in packet update mechanism In the current dell_rbu code ver 2.0 the packet update mechanism makes the user app dump every individual packet in to the driver. This adds in efficiency as every packet update makes the /sys/class/firmware/dell_rbu/loading and data files to disappear and reappear again. Thus the user app needs to wait for the files to reappear to dump another packet. This slows down the packet update tremendously in case of large number of packets. I am submitting a new patch for dell_rbu which will change the way we do packet updates; In the new method the user app will create a new single file which has already packetized the rbu image and all the packets are now staged in this file. This driver also creates a new entry in /sys/devices/platform/dell_rbu/packet_size ; the user needs to echo the packet size here before downloading the packet file. The user should do the following: create one single file which has all the packets stacked together. echo the packet size in to /sys/devices/platform/dell_rbu/packet_size. echo 1 > /sys/class/firmware/dell_rbu/loading cat the packetfile > /sys/class/firmware/dell_rbu/data echo 0 > /sys/class/firmware/dell_rbu/loading The driver takes the file which came through /sys/class/firmware/dell_rbu/data and takes chunks of paket_size data from it and place in contiguous memory. This makes packet update process very efficient and fast. As all the packet update happens in one single operation. The user can still read back the downloaded file from /sys/devices/platform/dell_rbu/data. Signed-off-by: Abhay Salunke <abhay_salunke@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-11 15:29:02 +00:00
pr_debug("%p:%td\n", temp, (end - temp));
[PATCH] dell_rbu: changes in packet update mechanism In the current dell_rbu code ver 2.0 the packet update mechanism makes the user app dump every individual packet in to the driver. This adds in efficiency as every packet update makes the /sys/class/firmware/dell_rbu/loading and data files to disappear and reappear again. Thus the user app needs to wait for the files to reappear to dump another packet. This slows down the packet update tremendously in case of large number of packets. I am submitting a new patch for dell_rbu which will change the way we do packet updates; In the new method the user app will create a new single file which has already packetized the rbu image and all the packets are now staged in this file. This driver also creates a new entry in /sys/devices/platform/dell_rbu/packet_size ; the user needs to echo the packet size here before downloading the packet file. The user should do the following: create one single file which has all the packets stacked together. echo the packet size in to /sys/devices/platform/dell_rbu/packet_size. echo 1 > /sys/class/firmware/dell_rbu/loading cat the packetfile > /sys/class/firmware/dell_rbu/data echo 0 > /sys/class/firmware/dell_rbu/loading The driver takes the file which came through /sys/class/firmware/dell_rbu/data and takes chunks of paket_size data from it and place in contiguous memory. This makes packet update process very efficient and fast. As all the packet update happens in one single operation. The user can still read back the downloaded file from /sys/devices/platform/dell_rbu/data. Signed-off-by: Abhay Salunke <abhay_salunke@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-11 15:29:02 +00:00
temp += packet_length;
}
[PATCH] dell_rbu: changes in packet update mechanism In the current dell_rbu code ver 2.0 the packet update mechanism makes the user app dump every individual packet in to the driver. This adds in efficiency as every packet update makes the /sys/class/firmware/dell_rbu/loading and data files to disappear and reappear again. Thus the user app needs to wait for the files to reappear to dump another packet. This slows down the packet update tremendously in case of large number of packets. I am submitting a new patch for dell_rbu which will change the way we do packet updates; In the new method the user app will create a new single file which has already packetized the rbu image and all the packets are now staged in this file. This driver also creates a new entry in /sys/devices/platform/dell_rbu/packet_size ; the user needs to echo the packet size here before downloading the packet file. The user should do the following: create one single file which has all the packets stacked together. echo the packet size in to /sys/devices/platform/dell_rbu/packet_size. echo 1 > /sys/class/firmware/dell_rbu/loading cat the packetfile > /sys/class/firmware/dell_rbu/data echo 0 > /sys/class/firmware/dell_rbu/loading The driver takes the file which came through /sys/class/firmware/dell_rbu/data and takes chunks of paket_size data from it and place in contiguous memory. This makes packet update process very efficient and fast. As all the packet update happens in one single operation. The user can still read back the downloaded file from /sys/devices/platform/dell_rbu/data. Signed-off-by: Abhay Salunke <abhay_salunke@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-11 15:29:02 +00:00
rbu_data.imagesize = length;
return rc;
}
static int do_packet_read(char *data, struct list_head *ptemp_list,
int length, int bytes_read, int *list_read_count)
{
void *ptemp_buf;
struct packet_data *newpacket = NULL;
int bytes_copied = 0;
int j = 0;
newpacket = list_entry(ptemp_list, struct packet_data, list);
*list_read_count += newpacket->length;
if (*list_read_count > bytes_read) {
/* point to the start of unread data */
j = newpacket->length - (*list_read_count - bytes_read);
/* point to the offset in the packet buffer */
ptemp_buf = (u8 *) newpacket->data + j;
/*
* check if there is enough room in
* * the incoming buffer
*/
if (length > (*list_read_count - bytes_read))
/*
* copy what ever is there in this
* packet and move on
*/
bytes_copied = (*list_read_count - bytes_read);
else
/* copy the remaining */
bytes_copied = length;
memcpy(data, ptemp_buf, bytes_copied);
}
return bytes_copied;
}
[PATCH] dell_rbu: changes in packet update mechanism In the current dell_rbu code ver 2.0 the packet update mechanism makes the user app dump every individual packet in to the driver. This adds in efficiency as every packet update makes the /sys/class/firmware/dell_rbu/loading and data files to disappear and reappear again. Thus the user app needs to wait for the files to reappear to dump another packet. This slows down the packet update tremendously in case of large number of packets. I am submitting a new patch for dell_rbu which will change the way we do packet updates; In the new method the user app will create a new single file which has already packetized the rbu image and all the packets are now staged in this file. This driver also creates a new entry in /sys/devices/platform/dell_rbu/packet_size ; the user needs to echo the packet size here before downloading the packet file. The user should do the following: create one single file which has all the packets stacked together. echo the packet size in to /sys/devices/platform/dell_rbu/packet_size. echo 1 > /sys/class/firmware/dell_rbu/loading cat the packetfile > /sys/class/firmware/dell_rbu/data echo 0 > /sys/class/firmware/dell_rbu/loading The driver takes the file which came through /sys/class/firmware/dell_rbu/data and takes chunks of paket_size data from it and place in contiguous memory. This makes packet update process very efficient and fast. As all the packet update happens in one single operation. The user can still read back the downloaded file from /sys/devices/platform/dell_rbu/data. Signed-off-by: Abhay Salunke <abhay_salunke@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-11 15:29:02 +00:00
static int packet_read_list(char *data, size_t * pread_length)
{
struct list_head *ptemp_list;
int temp_count = 0;
int bytes_copied = 0;
int bytes_read = 0;
int remaining_bytes = 0;
char *pdest = data;
/* check if we have any packets */
if (0 == rbu_data.num_packets)
return -ENOMEM;
remaining_bytes = *pread_length;
bytes_read = rbu_data.packet_read_count;
ptemp_list = (&packet_data_head.list)->next;
while (!list_empty(ptemp_list)) {
bytes_copied = do_packet_read(pdest, ptemp_list,
remaining_bytes, bytes_read, &temp_count);
remaining_bytes -= bytes_copied;
bytes_read += bytes_copied;
pdest += bytes_copied;
/*
* check if we reached end of buffer before reaching the
* last packet
*/
if (remaining_bytes == 0)
break;
ptemp_list = ptemp_list->next;
}
/*finally set the bytes read */
*pread_length = bytes_read - rbu_data.packet_read_count;
rbu_data.packet_read_count = bytes_read;
return 0;
}
static void packet_empty_list(void)
{
struct list_head *ptemp_list;
struct list_head *pnext_list;
struct packet_data *newpacket;
ptemp_list = (&packet_data_head.list)->next;
while (!list_empty(ptemp_list)) {
newpacket =
list_entry(ptemp_list, struct packet_data, list);
pnext_list = ptemp_list->next;
list_del(ptemp_list);
ptemp_list = pnext_list;
/*
* zero out the RBU packet memory before freeing
* to make sure there are no stale RBU packets left in memory
*/
memset(newpacket->data, 0, rbu_data.packetsize);
free_pages((unsigned long) newpacket->data,
newpacket->ordernum);
kfree(newpacket);
}
rbu_data.packet_read_count = 0;
rbu_data.num_packets = 0;
[PATCH] dell_rbu: changes in packet update mechanism In the current dell_rbu code ver 2.0 the packet update mechanism makes the user app dump every individual packet in to the driver. This adds in efficiency as every packet update makes the /sys/class/firmware/dell_rbu/loading and data files to disappear and reappear again. Thus the user app needs to wait for the files to reappear to dump another packet. This slows down the packet update tremendously in case of large number of packets. I am submitting a new patch for dell_rbu which will change the way we do packet updates; In the new method the user app will create a new single file which has already packetized the rbu image and all the packets are now staged in this file. This driver also creates a new entry in /sys/devices/platform/dell_rbu/packet_size ; the user needs to echo the packet size here before downloading the packet file. The user should do the following: create one single file which has all the packets stacked together. echo the packet size in to /sys/devices/platform/dell_rbu/packet_size. echo 1 > /sys/class/firmware/dell_rbu/loading cat the packetfile > /sys/class/firmware/dell_rbu/data echo 0 > /sys/class/firmware/dell_rbu/loading The driver takes the file which came through /sys/class/firmware/dell_rbu/data and takes chunks of paket_size data from it and place in contiguous memory. This makes packet update process very efficient and fast. As all the packet update happens in one single operation. The user can still read back the downloaded file from /sys/devices/platform/dell_rbu/data. Signed-off-by: Abhay Salunke <abhay_salunke@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-11 15:29:02 +00:00
rbu_data.imagesize = 0;
}
/*
* img_update_free: Frees the buffer allocated for storing BIOS image
* Always called with lock held and returned with lock held
*/
static void img_update_free(void)
{
if (!rbu_data.image_update_buffer)
return;
/*
* zero out this buffer before freeing it to get rid of any stale
* BIOS image copied in memory.
*/
memset(rbu_data.image_update_buffer, 0,
rbu_data.image_update_buffer_size);
if (rbu_data.dma_alloc == 1)
dma_free_coherent(NULL, rbu_data.bios_image_size,
rbu_data.image_update_buffer, dell_rbu_dmaaddr);
else
free_pages((unsigned long) rbu_data.image_update_buffer,
rbu_data.image_update_ordernum);
/*
* Re-initialize the rbu_data variables after a free
*/
rbu_data.image_update_ordernum = -1;
rbu_data.image_update_buffer = NULL;
rbu_data.image_update_buffer_size = 0;
rbu_data.bios_image_size = 0;
rbu_data.dma_alloc = 0;
}
/*
* img_update_realloc: This function allocates the contiguous pages to
* accommodate the requested size of data. The memory address and size
* values are stored globally and on every call to this function the new
* size is checked to see if more data is required than the existing size.
* If true the previous memory is freed and new allocation is done to
* accommodate the new size. If the incoming size is less then than the
* already allocated size, then that memory is reused. This function is
* called with lock held and returns with lock held.
*/
static int img_update_realloc(unsigned long size)
{
unsigned char *image_update_buffer = NULL;
unsigned long rc;
unsigned long img_buf_phys_addr;
int ordernum;
int dma_alloc = 0;
/*
* check if the buffer of sufficient size has been
* already allocated
*/
if (rbu_data.image_update_buffer_size >= size) {
/*
* check for corruption
*/
if ((size != 0) && (rbu_data.image_update_buffer == NULL)) {
printk(KERN_ERR "dell_rbu:%s: corruption "
"check failed\n", __func__);
return -EINVAL;
}
/*
* we have a valid pre-allocated buffer with
* sufficient size
*/
return 0;
}
/*
* free any previously allocated buffer
*/
img_update_free();
spin_unlock(&rbu_data.lock);
ordernum = get_order(size);
image_update_buffer =
(unsigned char *) __get_free_pages(GFP_KERNEL, ordernum);
img_buf_phys_addr =
(unsigned long) virt_to_phys(image_update_buffer);
if (img_buf_phys_addr > BIOS_SCAN_LIMIT) {
free_pages((unsigned long) image_update_buffer, ordernum);
ordernum = -1;
image_update_buffer = dma_alloc_coherent(NULL, size,
&dell_rbu_dmaaddr, GFP_KERNEL);
dma_alloc = 1;
}
spin_lock(&rbu_data.lock);
if (image_update_buffer != NULL) {
rbu_data.image_update_buffer = image_update_buffer;
rbu_data.image_update_buffer_size = size;
rbu_data.bios_image_size =
rbu_data.image_update_buffer_size;
rbu_data.image_update_ordernum = ordernum;
rbu_data.dma_alloc = dma_alloc;
rc = 0;
} else {
pr_debug("Not enough memory for image update:"
"size = %ld\n", size);
rc = -ENOMEM;
}
return rc;
}
static ssize_t read_packet_data(char *buffer, loff_t pos, size_t count)
{
int retval;
size_t bytes_left;
size_t data_length;
char *ptempBuf = buffer;
/* check to see if we have something to return */
if (rbu_data.num_packets == 0) {
pr_debug("read_packet_data: no packets written\n");
retval = -ENOMEM;
goto read_rbu_data_exit;
}
[PATCH] dell_rbu: changes in packet update mechanism In the current dell_rbu code ver 2.0 the packet update mechanism makes the user app dump every individual packet in to the driver. This adds in efficiency as every packet update makes the /sys/class/firmware/dell_rbu/loading and data files to disappear and reappear again. Thus the user app needs to wait for the files to reappear to dump another packet. This slows down the packet update tremendously in case of large number of packets. I am submitting a new patch for dell_rbu which will change the way we do packet updates; In the new method the user app will create a new single file which has already packetized the rbu image and all the packets are now staged in this file. This driver also creates a new entry in /sys/devices/platform/dell_rbu/packet_size ; the user needs to echo the packet size here before downloading the packet file. The user should do the following: create one single file which has all the packets stacked together. echo the packet size in to /sys/devices/platform/dell_rbu/packet_size. echo 1 > /sys/class/firmware/dell_rbu/loading cat the packetfile > /sys/class/firmware/dell_rbu/data echo 0 > /sys/class/firmware/dell_rbu/loading The driver takes the file which came through /sys/class/firmware/dell_rbu/data and takes chunks of paket_size data from it and place in contiguous memory. This makes packet update process very efficient and fast. As all the packet update happens in one single operation. The user can still read back the downloaded file from /sys/devices/platform/dell_rbu/data. Signed-off-by: Abhay Salunke <abhay_salunke@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-11 15:29:02 +00:00
if (pos > rbu_data.imagesize) {
retval = 0;
printk(KERN_WARNING "dell_rbu:read_packet_data: "
"data underrun\n");
goto read_rbu_data_exit;
}
[PATCH] dell_rbu: changes in packet update mechanism In the current dell_rbu code ver 2.0 the packet update mechanism makes the user app dump every individual packet in to the driver. This adds in efficiency as every packet update makes the /sys/class/firmware/dell_rbu/loading and data files to disappear and reappear again. Thus the user app needs to wait for the files to reappear to dump another packet. This slows down the packet update tremendously in case of large number of packets. I am submitting a new patch for dell_rbu which will change the way we do packet updates; In the new method the user app will create a new single file which has already packetized the rbu image and all the packets are now staged in this file. This driver also creates a new entry in /sys/devices/platform/dell_rbu/packet_size ; the user needs to echo the packet size here before downloading the packet file. The user should do the following: create one single file which has all the packets stacked together. echo the packet size in to /sys/devices/platform/dell_rbu/packet_size. echo 1 > /sys/class/firmware/dell_rbu/loading cat the packetfile > /sys/class/firmware/dell_rbu/data echo 0 > /sys/class/firmware/dell_rbu/loading The driver takes the file which came through /sys/class/firmware/dell_rbu/data and takes chunks of paket_size data from it and place in contiguous memory. This makes packet update process very efficient and fast. As all the packet update happens in one single operation. The user can still read back the downloaded file from /sys/devices/platform/dell_rbu/data. Signed-off-by: Abhay Salunke <abhay_salunke@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-11 15:29:02 +00:00
bytes_left = rbu_data.imagesize - pos;
data_length = min(bytes_left, count);
if ((retval = packet_read_list(ptempBuf, &data_length)) < 0)
goto read_rbu_data_exit;
[PATCH] dell_rbu: changes in packet update mechanism In the current dell_rbu code ver 2.0 the packet update mechanism makes the user app dump every individual packet in to the driver. This adds in efficiency as every packet update makes the /sys/class/firmware/dell_rbu/loading and data files to disappear and reappear again. Thus the user app needs to wait for the files to reappear to dump another packet. This slows down the packet update tremendously in case of large number of packets. I am submitting a new patch for dell_rbu which will change the way we do packet updates; In the new method the user app will create a new single file which has already packetized the rbu image and all the packets are now staged in this file. This driver also creates a new entry in /sys/devices/platform/dell_rbu/packet_size ; the user needs to echo the packet size here before downloading the packet file. The user should do the following: create one single file which has all the packets stacked together. echo the packet size in to /sys/devices/platform/dell_rbu/packet_size. echo 1 > /sys/class/firmware/dell_rbu/loading cat the packetfile > /sys/class/firmware/dell_rbu/data echo 0 > /sys/class/firmware/dell_rbu/loading The driver takes the file which came through /sys/class/firmware/dell_rbu/data and takes chunks of paket_size data from it and place in contiguous memory. This makes packet update process very efficient and fast. As all the packet update happens in one single operation. The user can still read back the downloaded file from /sys/devices/platform/dell_rbu/data. Signed-off-by: Abhay Salunke <abhay_salunke@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-11 15:29:02 +00:00
if ((pos + count) > rbu_data.imagesize) {
rbu_data.packet_read_count = 0;
/* this was the last copy */
retval = bytes_left;
} else
retval = count;
read_rbu_data_exit:
return retval;
}
static ssize_t read_rbu_mono_data(char *buffer, loff_t pos, size_t count)
{
/* check to see if we have something to return */
if ((rbu_data.image_update_buffer == NULL) ||
(rbu_data.bios_image_size == 0)) {
pr_debug("read_rbu_data_mono: image_update_buffer %p ,"
"bios_image_size %lu\n",
rbu_data.image_update_buffer,
rbu_data.bios_image_size);
return -ENOMEM;
}
return memory_read_from_buffer(buffer, count, &pos,
rbu_data.image_update_buffer, rbu_data.bios_image_size);
}
static ssize_t read_rbu_data(struct file *filp, struct kobject *kobj,
sysfs: add parameter "struct bin_attribute *" in .read/.write methods for sysfs binary attributes Well, first of all, I don't want to change so many files either. What I do: Adding a new parameter "struct bin_attribute *" in the .read/.write methods for the sysfs binary attributes. In fact, only the four lines change in fs/sysfs/bin.c and include/linux/sysfs.h do the real work. But I have to update all the files that use binary attributes to make them compatible with the new .read and .write methods. I'm not sure if I missed any. :( Why I do this: For a sysfs attribute, we can get a pointer pointing to the struct attribute in the .show/.store method, while we can't do this for the binary attributes. I don't know why this is different, but this does make it not so handy to use the binary attributes as the regular ones. So I think this patch is reasonable. :) Who benefits from it: The patch that exposes ACPI tables in sysfs requires such an improvement. All the table binary attributes share the same .read method. Parameter "struct bin_attribute *" is used to get the table signature and instance number which are used to distinguish different ACPI table binary attributes. Without this parameter, we need to offer different .read methods for different ACPI table binary attributes. This is impossible as there are various ACPI tables on different platforms, and we don't know what they are until they are loaded. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-09 05:57:22 +00:00
struct bin_attribute *bin_attr,
char *buffer, loff_t pos, size_t count)
{
ssize_t ret_count = 0;
spin_lock(&rbu_data.lock);
if (!strcmp(image_type, "mono"))
ret_count = read_rbu_mono_data(buffer, pos, count);
else if (!strcmp(image_type, "packet"))
ret_count = read_packet_data(buffer, pos, count);
else
pr_debug("read_rbu_data: invalid image type specified\n");
spin_unlock(&rbu_data.lock);
return ret_count;
}
static void callbackfn_rbu(const struct firmware *fw, void *context)
{
[PATCH] dell_rbu: fix Bug 5854 This fixes http://bugzilla.kernel.org/show_bug.cgi?id=5854 Root cause: The dell_rbu driver creates entries in /sys/class/firmware/dell_rbu/ by calling request_firmware_nowait (without hotplug ) this function inturn starts a kernel thread which creates the entries in /sys/class/firmware/dell_rbu/loading , data and the thread waits on the user action to return control back to the callback fucntion of dell_rbu. The thread calls wait_on_completion which puts it in a D state until the user action happens. If there is no user action happening the load average goes up as the thread D state is taken in to account. Also after downloading the BIOS image the enrties go away momentarily but they are recreated from the callback function in dell_rbu. This causes the thread to get recreated causing the load average to permenently stay around 1. Fix: The dell_rbu also creates the entry /sys/devices/platform/dell_rbu/image_type at driver load time. The image type by default is mono if required the user can echo packet to image_type to make the BIOS update mechanism using packets. Also by echoing init in to image_type the /sys/class/firmware/dell_rbu entries can be created. The driver code was changed to not create /sys/class/firmware/dell_rbu entries during load time, and also to not create the above entries from the callback function. The entries are only created by echoing init to /sys/devices/platform/dell_rbu/image_type The user now needs to create the entries to download the image monolithic or packet. This fixes the issue since the kernel thread only is created when ever the user is ready to download the BIOS image; this minimizes the life span of the kernel thread and the load average goes back to normal. Signed off by Abhay Salunke <abhay_salunke@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-14 21:21:14 +00:00
rbu_data.entry_created = 0;
if (!fw)
return;
if (!fw->size)
goto out;
spin_lock(&rbu_data.lock);
if (!strcmp(image_type, "mono")) {
if (!img_update_realloc(fw->size))
memcpy(rbu_data.image_update_buffer,
fw->data, fw->size);
} else if (!strcmp(image_type, "packet")) {
[PATCH] dell_rbu: changes in packet update mechanism In the current dell_rbu code ver 2.0 the packet update mechanism makes the user app dump every individual packet in to the driver. This adds in efficiency as every packet update makes the /sys/class/firmware/dell_rbu/loading and data files to disappear and reappear again. Thus the user app needs to wait for the files to reappear to dump another packet. This slows down the packet update tremendously in case of large number of packets. I am submitting a new patch for dell_rbu which will change the way we do packet updates; In the new method the user app will create a new single file which has already packetized the rbu image and all the packets are now staged in this file. This driver also creates a new entry in /sys/devices/platform/dell_rbu/packet_size ; the user needs to echo the packet size here before downloading the packet file. The user should do the following: create one single file which has all the packets stacked together. echo the packet size in to /sys/devices/platform/dell_rbu/packet_size. echo 1 > /sys/class/firmware/dell_rbu/loading cat the packetfile > /sys/class/firmware/dell_rbu/data echo 0 > /sys/class/firmware/dell_rbu/loading The driver takes the file which came through /sys/class/firmware/dell_rbu/data and takes chunks of paket_size data from it and place in contiguous memory. This makes packet update process very efficient and fast. As all the packet update happens in one single operation. The user can still read back the downloaded file from /sys/devices/platform/dell_rbu/data. Signed-off-by: Abhay Salunke <abhay_salunke@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-11 15:29:02 +00:00
/*
* we need to free previous packets if a
* new hunk of packets needs to be downloaded
*/
packet_empty_list();
if (packetize_data(fw->data, fw->size))
/* Incase something goes wrong when we are
* in middle of packetizing the data, we
* need to free up whatever packets might
* have been created before we quit.
*/
packet_empty_list();
} else
pr_debug("invalid image type specified.\n");
spin_unlock(&rbu_data.lock);
out:
release_firmware(fw);
}
static ssize_t read_rbu_image_type(struct file *filp, struct kobject *kobj,
sysfs: add parameter "struct bin_attribute *" in .read/.write methods for sysfs binary attributes Well, first of all, I don't want to change so many files either. What I do: Adding a new parameter "struct bin_attribute *" in the .read/.write methods for the sysfs binary attributes. In fact, only the four lines change in fs/sysfs/bin.c and include/linux/sysfs.h do the real work. But I have to update all the files that use binary attributes to make them compatible with the new .read and .write methods. I'm not sure if I missed any. :( Why I do this: For a sysfs attribute, we can get a pointer pointing to the struct attribute in the .show/.store method, while we can't do this for the binary attributes. I don't know why this is different, but this does make it not so handy to use the binary attributes as the regular ones. So I think this patch is reasonable. :) Who benefits from it: The patch that exposes ACPI tables in sysfs requires such an improvement. All the table binary attributes share the same .read method. Parameter "struct bin_attribute *" is used to get the table signature and instance number which are used to distinguish different ACPI table binary attributes. Without this parameter, we need to offer different .read methods for different ACPI table binary attributes. This is impossible as there are various ACPI tables on different platforms, and we don't know what they are until they are loaded. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-09 05:57:22 +00:00
struct bin_attribute *bin_attr,
char *buffer, loff_t pos, size_t count)
{
int size = 0;
if (!pos)
size = scnprintf(buffer, count, "%s\n", image_type);
return size;
}
static ssize_t write_rbu_image_type(struct file *filp, struct kobject *kobj,
sysfs: add parameter "struct bin_attribute *" in .read/.write methods for sysfs binary attributes Well, first of all, I don't want to change so many files either. What I do: Adding a new parameter "struct bin_attribute *" in the .read/.write methods for the sysfs binary attributes. In fact, only the four lines change in fs/sysfs/bin.c and include/linux/sysfs.h do the real work. But I have to update all the files that use binary attributes to make them compatible with the new .read and .write methods. I'm not sure if I missed any. :( Why I do this: For a sysfs attribute, we can get a pointer pointing to the struct attribute in the .show/.store method, while we can't do this for the binary attributes. I don't know why this is different, but this does make it not so handy to use the binary attributes as the regular ones. So I think this patch is reasonable. :) Who benefits from it: The patch that exposes ACPI tables in sysfs requires such an improvement. All the table binary attributes share the same .read method. Parameter "struct bin_attribute *" is used to get the table signature and instance number which are used to distinguish different ACPI table binary attributes. Without this parameter, we need to offer different .read methods for different ACPI table binary attributes. This is impossible as there are various ACPI tables on different platforms, and we don't know what they are until they are loaded. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-09 05:57:22 +00:00
struct bin_attribute *bin_attr,
char *buffer, loff_t pos, size_t count)
{
int rc = count;
int req_firm_rc = 0;
int i;
spin_lock(&rbu_data.lock);
/*
* Find the first newline or space
*/
for (i = 0; i < count; ++i)
if (buffer[i] == '\n' || buffer[i] == ' ') {
buffer[i] = '\0';
break;
}
if (i == count)
buffer[count] = '\0';
if (strstr(buffer, "mono"))
strcpy(image_type, "mono");
else if (strstr(buffer, "packet"))
strcpy(image_type, "packet");
else if (strstr(buffer, "init")) {
/*
* If due to the user error the driver gets in a bad
* state where even though it is loaded , the
* /sys/class/firmware/dell_rbu entries are missing.
* to cover this situation the user can recreate entries
* by writing init to image_type.
*/
if (!rbu_data.entry_created) {
spin_unlock(&rbu_data.lock);
req_firm_rc = request_firmware_nowait(THIS_MODULE,
FW_ACTION_NOHOTPLUG, "dell_rbu",
&rbu_device->dev, GFP_KERNEL, &context,
callbackfn_rbu);
if (req_firm_rc) {
printk(KERN_ERR
"dell_rbu:%s request_firmware_nowait"
" failed %d\n", __func__, rc);
rc = -EIO;
} else
rbu_data.entry_created = 1;
spin_lock(&rbu_data.lock);
}
} else {
printk(KERN_WARNING "dell_rbu: image_type is invalid\n");
spin_unlock(&rbu_data.lock);
return -EINVAL;
}
/* we must free all previous allocations */
packet_empty_list();
img_update_free();
spin_unlock(&rbu_data.lock);
return rc;
}
static ssize_t read_rbu_packet_size(struct file *filp, struct kobject *kobj,
sysfs: add parameter "struct bin_attribute *" in .read/.write methods for sysfs binary attributes Well, first of all, I don't want to change so many files either. What I do: Adding a new parameter "struct bin_attribute *" in the .read/.write methods for the sysfs binary attributes. In fact, only the four lines change in fs/sysfs/bin.c and include/linux/sysfs.h do the real work. But I have to update all the files that use binary attributes to make them compatible with the new .read and .write methods. I'm not sure if I missed any. :( Why I do this: For a sysfs attribute, we can get a pointer pointing to the struct attribute in the .show/.store method, while we can't do this for the binary attributes. I don't know why this is different, but this does make it not so handy to use the binary attributes as the regular ones. So I think this patch is reasonable. :) Who benefits from it: The patch that exposes ACPI tables in sysfs requires such an improvement. All the table binary attributes share the same .read method. Parameter "struct bin_attribute *" is used to get the table signature and instance number which are used to distinguish different ACPI table binary attributes. Without this parameter, we need to offer different .read methods for different ACPI table binary attributes. This is impossible as there are various ACPI tables on different platforms, and we don't know what they are until they are loaded. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-09 05:57:22 +00:00
struct bin_attribute *bin_attr,
char *buffer, loff_t pos, size_t count)
[PATCH] dell_rbu: changes in packet update mechanism In the current dell_rbu code ver 2.0 the packet update mechanism makes the user app dump every individual packet in to the driver. This adds in efficiency as every packet update makes the /sys/class/firmware/dell_rbu/loading and data files to disappear and reappear again. Thus the user app needs to wait for the files to reappear to dump another packet. This slows down the packet update tremendously in case of large number of packets. I am submitting a new patch for dell_rbu which will change the way we do packet updates; In the new method the user app will create a new single file which has already packetized the rbu image and all the packets are now staged in this file. This driver also creates a new entry in /sys/devices/platform/dell_rbu/packet_size ; the user needs to echo the packet size here before downloading the packet file. The user should do the following: create one single file which has all the packets stacked together. echo the packet size in to /sys/devices/platform/dell_rbu/packet_size. echo 1 > /sys/class/firmware/dell_rbu/loading cat the packetfile > /sys/class/firmware/dell_rbu/data echo 0 > /sys/class/firmware/dell_rbu/loading The driver takes the file which came through /sys/class/firmware/dell_rbu/data and takes chunks of paket_size data from it and place in contiguous memory. This makes packet update process very efficient and fast. As all the packet update happens in one single operation. The user can still read back the downloaded file from /sys/devices/platform/dell_rbu/data. Signed-off-by: Abhay Salunke <abhay_salunke@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-11 15:29:02 +00:00
{
int size = 0;
if (!pos) {
spin_lock(&rbu_data.lock);
size = scnprintf(buffer, count, "%lu\n", rbu_data.packetsize);
[PATCH] dell_rbu: changes in packet update mechanism In the current dell_rbu code ver 2.0 the packet update mechanism makes the user app dump every individual packet in to the driver. This adds in efficiency as every packet update makes the /sys/class/firmware/dell_rbu/loading and data files to disappear and reappear again. Thus the user app needs to wait for the files to reappear to dump another packet. This slows down the packet update tremendously in case of large number of packets. I am submitting a new patch for dell_rbu which will change the way we do packet updates; In the new method the user app will create a new single file which has already packetized the rbu image and all the packets are now staged in this file. This driver also creates a new entry in /sys/devices/platform/dell_rbu/packet_size ; the user needs to echo the packet size here before downloading the packet file. The user should do the following: create one single file which has all the packets stacked together. echo the packet size in to /sys/devices/platform/dell_rbu/packet_size. echo 1 > /sys/class/firmware/dell_rbu/loading cat the packetfile > /sys/class/firmware/dell_rbu/data echo 0 > /sys/class/firmware/dell_rbu/loading The driver takes the file which came through /sys/class/firmware/dell_rbu/data and takes chunks of paket_size data from it and place in contiguous memory. This makes packet update process very efficient and fast. As all the packet update happens in one single operation. The user can still read back the downloaded file from /sys/devices/platform/dell_rbu/data. Signed-off-by: Abhay Salunke <abhay_salunke@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-11 15:29:02 +00:00
spin_unlock(&rbu_data.lock);
}
return size;
}
static ssize_t write_rbu_packet_size(struct file *filp, struct kobject *kobj,
sysfs: add parameter "struct bin_attribute *" in .read/.write methods for sysfs binary attributes Well, first of all, I don't want to change so many files either. What I do: Adding a new parameter "struct bin_attribute *" in the .read/.write methods for the sysfs binary attributes. In fact, only the four lines change in fs/sysfs/bin.c and include/linux/sysfs.h do the real work. But I have to update all the files that use binary attributes to make them compatible with the new .read and .write methods. I'm not sure if I missed any. :( Why I do this: For a sysfs attribute, we can get a pointer pointing to the struct attribute in the .show/.store method, while we can't do this for the binary attributes. I don't know why this is different, but this does make it not so handy to use the binary attributes as the regular ones. So I think this patch is reasonable. :) Who benefits from it: The patch that exposes ACPI tables in sysfs requires such an improvement. All the table binary attributes share the same .read method. Parameter "struct bin_attribute *" is used to get the table signature and instance number which are used to distinguish different ACPI table binary attributes. Without this parameter, we need to offer different .read methods for different ACPI table binary attributes. This is impossible as there are various ACPI tables on different platforms, and we don't know what they are until they are loaded. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-09 05:57:22 +00:00
struct bin_attribute *bin_attr,
char *buffer, loff_t pos, size_t count)
[PATCH] dell_rbu: changes in packet update mechanism In the current dell_rbu code ver 2.0 the packet update mechanism makes the user app dump every individual packet in to the driver. This adds in efficiency as every packet update makes the /sys/class/firmware/dell_rbu/loading and data files to disappear and reappear again. Thus the user app needs to wait for the files to reappear to dump another packet. This slows down the packet update tremendously in case of large number of packets. I am submitting a new patch for dell_rbu which will change the way we do packet updates; In the new method the user app will create a new single file which has already packetized the rbu image and all the packets are now staged in this file. This driver also creates a new entry in /sys/devices/platform/dell_rbu/packet_size ; the user needs to echo the packet size here before downloading the packet file. The user should do the following: create one single file which has all the packets stacked together. echo the packet size in to /sys/devices/platform/dell_rbu/packet_size. echo 1 > /sys/class/firmware/dell_rbu/loading cat the packetfile > /sys/class/firmware/dell_rbu/data echo 0 > /sys/class/firmware/dell_rbu/loading The driver takes the file which came through /sys/class/firmware/dell_rbu/data and takes chunks of paket_size data from it and place in contiguous memory. This makes packet update process very efficient and fast. As all the packet update happens in one single operation. The user can still read back the downloaded file from /sys/devices/platform/dell_rbu/data. Signed-off-by: Abhay Salunke <abhay_salunke@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-11 15:29:02 +00:00
{
unsigned long temp;
spin_lock(&rbu_data.lock);
packet_empty_list();
sscanf(buffer, "%lu", &temp);
if (temp < 0xffffffff)
rbu_data.packetsize = temp;
spin_unlock(&rbu_data.lock);
return count;
}
static struct bin_attribute rbu_data_attr = {
.attr = {.name = "data", .mode = 0444},
.read = read_rbu_data,
};
static struct bin_attribute rbu_image_type_attr = {
.attr = {.name = "image_type", .mode = 0644},
.read = read_rbu_image_type,
.write = write_rbu_image_type,
};
[PATCH] dell_rbu: changes in packet update mechanism In the current dell_rbu code ver 2.0 the packet update mechanism makes the user app dump every individual packet in to the driver. This adds in efficiency as every packet update makes the /sys/class/firmware/dell_rbu/loading and data files to disappear and reappear again. Thus the user app needs to wait for the files to reappear to dump another packet. This slows down the packet update tremendously in case of large number of packets. I am submitting a new patch for dell_rbu which will change the way we do packet updates; In the new method the user app will create a new single file which has already packetized the rbu image and all the packets are now staged in this file. This driver also creates a new entry in /sys/devices/platform/dell_rbu/packet_size ; the user needs to echo the packet size here before downloading the packet file. The user should do the following: create one single file which has all the packets stacked together. echo the packet size in to /sys/devices/platform/dell_rbu/packet_size. echo 1 > /sys/class/firmware/dell_rbu/loading cat the packetfile > /sys/class/firmware/dell_rbu/data echo 0 > /sys/class/firmware/dell_rbu/loading The driver takes the file which came through /sys/class/firmware/dell_rbu/data and takes chunks of paket_size data from it and place in contiguous memory. This makes packet update process very efficient and fast. As all the packet update happens in one single operation. The user can still read back the downloaded file from /sys/devices/platform/dell_rbu/data. Signed-off-by: Abhay Salunke <abhay_salunke@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-11 15:29:02 +00:00
static struct bin_attribute rbu_packet_size_attr = {
.attr = {.name = "packet_size", .mode = 0644},
[PATCH] dell_rbu: changes in packet update mechanism In the current dell_rbu code ver 2.0 the packet update mechanism makes the user app dump every individual packet in to the driver. This adds in efficiency as every packet update makes the /sys/class/firmware/dell_rbu/loading and data files to disappear and reappear again. Thus the user app needs to wait for the files to reappear to dump another packet. This slows down the packet update tremendously in case of large number of packets. I am submitting a new patch for dell_rbu which will change the way we do packet updates; In the new method the user app will create a new single file which has already packetized the rbu image and all the packets are now staged in this file. This driver also creates a new entry in /sys/devices/platform/dell_rbu/packet_size ; the user needs to echo the packet size here before downloading the packet file. The user should do the following: create one single file which has all the packets stacked together. echo the packet size in to /sys/devices/platform/dell_rbu/packet_size. echo 1 > /sys/class/firmware/dell_rbu/loading cat the packetfile > /sys/class/firmware/dell_rbu/data echo 0 > /sys/class/firmware/dell_rbu/loading The driver takes the file which came through /sys/class/firmware/dell_rbu/data and takes chunks of paket_size data from it and place in contiguous memory. This makes packet update process very efficient and fast. As all the packet update happens in one single operation. The user can still read back the downloaded file from /sys/devices/platform/dell_rbu/data. Signed-off-by: Abhay Salunke <abhay_salunke@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-11 15:29:02 +00:00
.read = read_rbu_packet_size,
.write = write_rbu_packet_size,
};
static int __init dcdrbu_init(void)
{
int rc;
spin_lock_init(&rbu_data.lock);
init_packet_head();
rbu_device = platform_device_register_simple("dell_rbu", -1, NULL, 0);
if (IS_ERR(rbu_device)) {
printk(KERN_ERR
"dell_rbu:%s:platform_device_register_simple "
"failed\n", __func__);
return PTR_ERR(rbu_device);
}
rc = sysfs_create_bin_file(&rbu_device->dev.kobj, &rbu_data_attr);
if (rc)
goto out_devreg;
rc = sysfs_create_bin_file(&rbu_device->dev.kobj, &rbu_image_type_attr);
if (rc)
goto out_data;
rc = sysfs_create_bin_file(&rbu_device->dev.kobj,
[PATCH] dell_rbu: changes in packet update mechanism In the current dell_rbu code ver 2.0 the packet update mechanism makes the user app dump every individual packet in to the driver. This adds in efficiency as every packet update makes the /sys/class/firmware/dell_rbu/loading and data files to disappear and reappear again. Thus the user app needs to wait for the files to reappear to dump another packet. This slows down the packet update tremendously in case of large number of packets. I am submitting a new patch for dell_rbu which will change the way we do packet updates; In the new method the user app will create a new single file which has already packetized the rbu image and all the packets are now staged in this file. This driver also creates a new entry in /sys/devices/platform/dell_rbu/packet_size ; the user needs to echo the packet size here before downloading the packet file. The user should do the following: create one single file which has all the packets stacked together. echo the packet size in to /sys/devices/platform/dell_rbu/packet_size. echo 1 > /sys/class/firmware/dell_rbu/loading cat the packetfile > /sys/class/firmware/dell_rbu/data echo 0 > /sys/class/firmware/dell_rbu/loading The driver takes the file which came through /sys/class/firmware/dell_rbu/data and takes chunks of paket_size data from it and place in contiguous memory. This makes packet update process very efficient and fast. As all the packet update happens in one single operation. The user can still read back the downloaded file from /sys/devices/platform/dell_rbu/data. Signed-off-by: Abhay Salunke <abhay_salunke@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-11 15:29:02 +00:00
&rbu_packet_size_attr);
if (rc)
goto out_imtype;
[PATCH] dell_rbu: fix Bug 5854 This fixes http://bugzilla.kernel.org/show_bug.cgi?id=5854 Root cause: The dell_rbu driver creates entries in /sys/class/firmware/dell_rbu/ by calling request_firmware_nowait (without hotplug ) this function inturn starts a kernel thread which creates the entries in /sys/class/firmware/dell_rbu/loading , data and the thread waits on the user action to return control back to the callback fucntion of dell_rbu. The thread calls wait_on_completion which puts it in a D state until the user action happens. If there is no user action happening the load average goes up as the thread D state is taken in to account. Also after downloading the BIOS image the enrties go away momentarily but they are recreated from the callback function in dell_rbu. This causes the thread to get recreated causing the load average to permenently stay around 1. Fix: The dell_rbu also creates the entry /sys/devices/platform/dell_rbu/image_type at driver load time. The image type by default is mono if required the user can echo packet to image_type to make the BIOS update mechanism using packets. Also by echoing init in to image_type the /sys/class/firmware/dell_rbu entries can be created. The driver code was changed to not create /sys/class/firmware/dell_rbu entries during load time, and also to not create the above entries from the callback function. The entries are only created by echoing init to /sys/devices/platform/dell_rbu/image_type The user now needs to create the entries to download the image monolithic or packet. This fixes the issue since the kernel thread only is created when ever the user is ready to download the BIOS image; this minimizes the life span of the kernel thread and the load average goes back to normal. Signed off by Abhay Salunke <abhay_salunke@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-14 21:21:14 +00:00
rbu_data.entry_created = 0;
return 0;
out_imtype:
sysfs_remove_bin_file(&rbu_device->dev.kobj, &rbu_image_type_attr);
out_data:
sysfs_remove_bin_file(&rbu_device->dev.kobj, &rbu_data_attr);
out_devreg:
platform_device_unregister(rbu_device);
return rc;
}
static __exit void dcdrbu_exit(void)
{
spin_lock(&rbu_data.lock);
packet_empty_list();
img_update_free();
spin_unlock(&rbu_data.lock);
platform_device_unregister(rbu_device);
}
module_exit(dcdrbu_exit);
module_init(dcdrbu_init);
/* vim:noet:ts=8:sw=8
*/