linux/sound/soc/meson/aiu-fifo-i2s.c

174 lines
4.6 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
//
// Copyright (c) 2020 BayLibre, SAS.
// Author: Jerome Brunet <jbrunet@baylibre.com>
#include <linux/bitfield.h>
#include <linux/clk.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
#include <sound/soc-dai.h>
#include "aiu.h"
#include "aiu-fifo.h"
#define AIU_I2S_SOURCE_DESC_MODE_8CH BIT(0)
#define AIU_I2S_SOURCE_DESC_MODE_24BIT BIT(5)
#define AIU_I2S_SOURCE_DESC_MODE_32BIT BIT(9)
#define AIU_I2S_SOURCE_DESC_MODE_SPLIT BIT(11)
#define AIU_MEM_I2S_MASKS_IRQ_BLOCK GENMASK(31, 16)
#define AIU_MEM_I2S_CONTROL_MODE_16BIT BIT(6)
#define AIU_MEM_I2S_BUF_CNTL_INIT BIT(0)
#define AIU_RST_SOFT_I2S_FAST BIT(0)
ASoC: meson: aiu: Move AIU_I2S_MISC hold setting to aiu-fifo-i2s The out-of-tree vendor driver uses the following approach to set the AIU_I2S_MISC register: 1) write AIU_MEM_I2S_START_PTR and AIU_MEM_I2S_RD_PTR 2) configure AIU_I2S_MUTE_SWAP[15:0] 3) write AIU_MEM_I2S_END_PTR 4) set AIU_I2S_MISC[2] to 1 (documented as: "put I2S interface in hold mode") 5) set AIU_I2S_MISC[4] to 1 (depending on the driver revision it always stays at 1 while for older drivers this bit is unset in step 4) 6) set AIU_I2S_MISC[2] to 0 7) write AIU_MEM_I2S_MASKS 8) toggle AIU_MEM_I2S_CONTROL[0] 9) toggle AIU_MEM_I2S_BUF_CNTL[0] Move setting the AIU_I2S_MISC[2] bit to aiu_fifo_i2s_hw_params() so it resembles the flow in the vendor kernel more closely. While here also configure AIU_I2S_MISC[4] (documented as: "force each audio data to left or right according to the bit attached with the audio data") similar to how the vendor driver does this. This fixes the infamous and long-standing "machine gun noise" issue (a buffer underrun issue). Fixes: 6ae9ca9ce986bf ("ASoC: meson: aiu: add i2s and spdif support") Reported-by: Christian Hewitt <christianshewitt@gmail.com> Reported-by: Geraldo Nascimento <geraldogabriel@gmail.com> Tested-by: Christian Hewitt <christianshewitt@gmail.com> Tested-by: Geraldo Nascimento <geraldogabriel@gmail.com> Acked-by: Jerome Brunet <jbrunet@baylibre.com> Cc: stable@vger.kernel.org Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20211206210804.2512999-3-martin.blumenstingl@googlemail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-12-06 21:08:04 +00:00
#define AIU_I2S_MISC_HOLD_EN BIT(2)
#define AIU_I2S_MISC_FORCE_LEFT_RIGHT BIT(4)
#define AIU_FIFO_I2S_BLOCK 256
static struct snd_pcm_hardware fifo_i2s_pcm = {
.info = (SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_MMAP_VALID |
SNDRV_PCM_INFO_PAUSE),
.formats = AIU_FORMATS,
.rate_min = 5512,
.rate_max = 192000,
.channels_min = 2,
.channels_max = 8,
.period_bytes_min = AIU_FIFO_I2S_BLOCK,
.period_bytes_max = AIU_FIFO_I2S_BLOCK * USHRT_MAX,
.periods_min = 2,
.periods_max = UINT_MAX,
/* No real justification for this */
.buffer_bytes_max = 1 * 1024 * 1024,
};
static int aiu_fifo_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
struct snd_soc_dai *dai)
{
struct snd_soc_component *component = dai->component;
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
snd_soc_component_write(component, AIU_RST_SOFT,
AIU_RST_SOFT_I2S_FAST);
ASoC: soc-component: merge snd_soc_component_read() and snd_soc_component_read32() We had read/write function for Codec, Platform, etc, but these has been merged into snd_soc_component_read/write(). Internally, it is using regmap or driver function. In read case, each styles are like below regmap ret = regmap_read(..., reg, &val); driver function val = xxx->read(..., reg); Because of this kind of different style, to keep same read style, when we merged each read function into snd_soc_component_read(), we created snd_soc_component_read32(), like below. commit 738b49efe6c6 ("ASoC: add snd_soc_component_read32") (1) val = snd_soc_component_read32(component, reg); (2) ret = snd_soc_component_read(component, reg, &val); Many drivers are using snd_soc_component_read32(), and some drivers are using snd_soc_component_read() today. In generally, we don't check read function successes, because, we will have many other issues at initial timing if read function didn't work. Now we can use soc_component_err() when error case. This means, it is easy to notice if error occurred. This patch aggressively merge snd_soc_component_read() and _read32(), and makes snd_soc_component_read/write() as generally style. This patch do 1) merge snd_soc_component_read() and snd_soc_component_read32() 2) it uses soc_component_err() when error case (easy to notice) 3) keeps read32 for now by #define 4) update snd_soc_component_read() for all drivers Because _read() user drivers are not too many, this patch changes all user drivers. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/87sgev4mfl.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-16 05:19:41 +00:00
snd_soc_component_read(component, AIU_I2S_SYNC);
break;
}
return aiu_fifo_trigger(substream, cmd, dai);
}
static int aiu_fifo_i2s_prepare(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
struct snd_soc_component *component = dai->component;
int ret;
ret = aiu_fifo_prepare(substream, dai);
if (ret)
return ret;
snd_soc_component_update_bits(component,
AIU_MEM_I2S_BUF_CNTL,
AIU_MEM_I2S_BUF_CNTL_INIT,
AIU_MEM_I2S_BUF_CNTL_INIT);
snd_soc_component_update_bits(component,
AIU_MEM_I2S_BUF_CNTL,
AIU_MEM_I2S_BUF_CNTL_INIT, 0);
return 0;
}
static int aiu_fifo_i2s_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai)
{
struct snd_soc_component *component = dai->component;
struct aiu_fifo *fifo = snd_soc_dai_dma_data_get_playback(dai);
unsigned int val;
int ret;
ASoC: meson: aiu: Move AIU_I2S_MISC hold setting to aiu-fifo-i2s The out-of-tree vendor driver uses the following approach to set the AIU_I2S_MISC register: 1) write AIU_MEM_I2S_START_PTR and AIU_MEM_I2S_RD_PTR 2) configure AIU_I2S_MUTE_SWAP[15:0] 3) write AIU_MEM_I2S_END_PTR 4) set AIU_I2S_MISC[2] to 1 (documented as: "put I2S interface in hold mode") 5) set AIU_I2S_MISC[4] to 1 (depending on the driver revision it always stays at 1 while for older drivers this bit is unset in step 4) 6) set AIU_I2S_MISC[2] to 0 7) write AIU_MEM_I2S_MASKS 8) toggle AIU_MEM_I2S_CONTROL[0] 9) toggle AIU_MEM_I2S_BUF_CNTL[0] Move setting the AIU_I2S_MISC[2] bit to aiu_fifo_i2s_hw_params() so it resembles the flow in the vendor kernel more closely. While here also configure AIU_I2S_MISC[4] (documented as: "force each audio data to left or right according to the bit attached with the audio data") similar to how the vendor driver does this. This fixes the infamous and long-standing "machine gun noise" issue (a buffer underrun issue). Fixes: 6ae9ca9ce986bf ("ASoC: meson: aiu: add i2s and spdif support") Reported-by: Christian Hewitt <christianshewitt@gmail.com> Reported-by: Geraldo Nascimento <geraldogabriel@gmail.com> Tested-by: Christian Hewitt <christianshewitt@gmail.com> Tested-by: Geraldo Nascimento <geraldogabriel@gmail.com> Acked-by: Jerome Brunet <jbrunet@baylibre.com> Cc: stable@vger.kernel.org Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20211206210804.2512999-3-martin.blumenstingl@googlemail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-12-06 21:08:04 +00:00
snd_soc_component_update_bits(component, AIU_I2S_MISC,
AIU_I2S_MISC_HOLD_EN,
AIU_I2S_MISC_HOLD_EN);
ret = aiu_fifo_hw_params(substream, params, dai);
if (ret)
return ret;
switch (params_physical_width(params)) {
case 16:
val = AIU_MEM_I2S_CONTROL_MODE_16BIT;
break;
case 32:
val = 0;
break;
default:
dev_err(dai->dev, "Unsupported physical width %u\n",
params_physical_width(params));
return -EINVAL;
}
snd_soc_component_update_bits(component, AIU_MEM_I2S_CONTROL,
AIU_MEM_I2S_CONTROL_MODE_16BIT,
val);
/* Setup the irq periodicity */
val = params_period_bytes(params) / fifo->fifo_block;
val = FIELD_PREP(AIU_MEM_I2S_MASKS_IRQ_BLOCK, val);
snd_soc_component_update_bits(component, AIU_MEM_I2S_MASKS,
AIU_MEM_I2S_MASKS_IRQ_BLOCK, val);
ASoC: meson: aiu: Move AIU_I2S_MISC hold setting to aiu-fifo-i2s The out-of-tree vendor driver uses the following approach to set the AIU_I2S_MISC register: 1) write AIU_MEM_I2S_START_PTR and AIU_MEM_I2S_RD_PTR 2) configure AIU_I2S_MUTE_SWAP[15:0] 3) write AIU_MEM_I2S_END_PTR 4) set AIU_I2S_MISC[2] to 1 (documented as: "put I2S interface in hold mode") 5) set AIU_I2S_MISC[4] to 1 (depending on the driver revision it always stays at 1 while for older drivers this bit is unset in step 4) 6) set AIU_I2S_MISC[2] to 0 7) write AIU_MEM_I2S_MASKS 8) toggle AIU_MEM_I2S_CONTROL[0] 9) toggle AIU_MEM_I2S_BUF_CNTL[0] Move setting the AIU_I2S_MISC[2] bit to aiu_fifo_i2s_hw_params() so it resembles the flow in the vendor kernel more closely. While here also configure AIU_I2S_MISC[4] (documented as: "force each audio data to left or right according to the bit attached with the audio data") similar to how the vendor driver does this. This fixes the infamous and long-standing "machine gun noise" issue (a buffer underrun issue). Fixes: 6ae9ca9ce986bf ("ASoC: meson: aiu: add i2s and spdif support") Reported-by: Christian Hewitt <christianshewitt@gmail.com> Reported-by: Geraldo Nascimento <geraldogabriel@gmail.com> Tested-by: Christian Hewitt <christianshewitt@gmail.com> Tested-by: Geraldo Nascimento <geraldogabriel@gmail.com> Acked-by: Jerome Brunet <jbrunet@baylibre.com> Cc: stable@vger.kernel.org Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20211206210804.2512999-3-martin.blumenstingl@googlemail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-12-06 21:08:04 +00:00
/*
* Most (all?) supported SoCs have this bit set by default. The vendor
* driver however sets it manually (depending on the version either
* while un-setting AIU_I2S_MISC_HOLD_EN or right before that). Follow
* the same approach for consistency with the vendor driver.
*/
snd_soc_component_update_bits(component, AIU_I2S_MISC,
AIU_I2S_MISC_FORCE_LEFT_RIGHT,
AIU_I2S_MISC_FORCE_LEFT_RIGHT);
snd_soc_component_update_bits(component, AIU_I2S_MISC,
AIU_I2S_MISC_HOLD_EN, 0);
return 0;
}
const struct snd_soc_dai_ops aiu_fifo_i2s_dai_ops = {
.pcm_new = aiu_fifo_pcm_new,
.probe = aiu_fifo_i2s_dai_probe,
.remove = aiu_fifo_dai_remove,
.trigger = aiu_fifo_i2s_trigger,
.prepare = aiu_fifo_i2s_prepare,
.hw_params = aiu_fifo_i2s_hw_params,
.startup = aiu_fifo_startup,
.shutdown = aiu_fifo_shutdown,
};
int aiu_fifo_i2s_dai_probe(struct snd_soc_dai *dai)
{
struct snd_soc_component *component = dai->component;
struct aiu *aiu = snd_soc_component_get_drvdata(component);
struct aiu_fifo *fifo;
int ret;
ret = aiu_fifo_dai_probe(dai);
if (ret)
return ret;
fifo = snd_soc_dai_dma_data_get_playback(dai);
fifo->pcm = &fifo_i2s_pcm;
fifo->mem_offset = AIU_MEM_I2S_START;
fifo->fifo_block = AIU_FIFO_I2S_BLOCK;
fifo->pclk = aiu->i2s.clks[PCLK].clk;
fifo->irq = aiu->i2s.irq;
return 0;
}