Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-12-22 19:01:37 +00:00
Code Issues Packages Projects Releases Wiki Activity
2b632970da
linux/arch/m68k/coldfire/m520x.c

197 lines
5.4 KiB
C
Raw Normal View History

[PATCH] m68knommu: platform config code for 5208 ColdFire Platform configuration code for the Freescale 5208 ColdFire processor. Patch originally from Matt Waddel (from code originally written by Mike Lavender). Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 04:09:50 +00:00
/***************************************************************************/
/*
m68k: fix crufty ColdFire intro comments Quite a few of the ColdFire specific support files have a pathname in the title comments of the file. These files have moved around a bit over the years, and most are no longer accurate. Remove the pathname and fix the comments to include at least a short description of the files contents. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2014-08-19 01:55:24 +00:00
* m520x.c -- platform support for ColdFire 520x based boards
[PATCH] m68knommu: platform config code for 5208 ColdFire Platform configuration code for the Freescale 5208 ColdFire processor. Patch originally from Matt Waddel (from code originally written by Mike Lavender). Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 04:09:50 +00:00
*
* Copyright (C) 2005, Freescale (www.freescale.com)
* Copyright (C) 2005, Intec Automation (mike@steroidmicros.com)
m68knommu: platform setup for 520x ColdFire parts Switch to platform style configuration for 520x ColdFire parts. Initial support is for the UARTs. DMA support moved to common code for all ColdFire parts. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01 07:34:10 +00:00
* Copyright (C) 1999-2007, Greg Ungerer (gerg@snapgear.com)
[PATCH] m68knommu: platform config code for 5208 ColdFire Platform configuration code for the Freescale 5208 ColdFire processor. Patch originally from Matt Waddel (from code originally written by Mike Lavender). Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 04:09:50 +00:00
* Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com)
*/
/***************************************************************************/
#include <linux/kernel.h>
#include <linux/param.h>
m68knommu: platform setup for 520x ColdFire parts Switch to platform style configuration for 520x ColdFire parts. Initial support is for the UARTs. DMA support moved to common code for all ColdFire parts. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01 07:34:10 +00:00
#include <linux/init.h>
#include <linux/io.h>
[PATCH] m68knommu: platform config code for 5208 ColdFire Platform configuration code for the Freescale 5208 ColdFire processor. Patch originally from Matt Waddel (from code originally written by Mike Lavender). Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 04:09:50 +00:00
#include <asm/machdep.h>
m68knommu: platform setup for 520x ColdFire parts Switch to platform style configuration for 520x ColdFire parts. Initial support is for the UARTs. DMA support moved to common code for all ColdFire parts. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01 07:34:10 +00:00
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfuart.h>
m68knommu: Add clk definitions for m520x. The 520x has individually controllable clocks for its peripherals. Add clk definitions for these and add default initialization of either enabled or disabled for all of the clocks. Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-06-17 07:34:00 +00:00
#include <asm/mcfclk.h>
/***************************************************************************/
DEFINE_CLK(0, "flexbus", 2, MCF_CLK);
DEFINE_CLK(0, "fec.0", 12, MCF_CLK);
DEFINE_CLK(0, "edma", 17, MCF_CLK);
DEFINE_CLK(0, "intc.0", 18, MCF_CLK);
DEFINE_CLK(0, "iack.0", 21, MCF_CLK);
m68knommu: platform support for i2c devices on ColdFire SoC These changes based on work by Steven King <sfking@fdwdc.com> to support the i2c hardware modules on ColdFire SoC family devices. This is the per SoC hardware support. Contains a common platform device setup. Each of the SoC family members tends to have some minor local setup required to initialize the module. But all ColdFire family members use the same i2c hardware module. This i2c hardware module is the same as used in the Freescale iMX ARM based family of SoC devices. Steven's original patches were based on using a new and different i2c-coldfire.c driver. But this is not neccessary as we can use the existing Linux i2c-imx.c driver with no change required to it. And this patch is now based on using the existing i2c-imx driver. This patch only contains the ColdFire platform changes. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Tested-by: Angelo Dureghello <angelo@sysam.it>
2014-06-30 16:53:19 +00:00
DEFINE_CLK(0, "imx1-i2c.0", 22, MCF_CLK);
m68knommu: Add clk definitions for m520x. The 520x has individually controllable clocks for its peripherals. Add clk definitions for these and add default initialization of either enabled or disabled for all of the clocks. Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-06-17 07:34:00 +00:00
DEFINE_CLK(0, "mcfqspi.0", 23, MCF_CLK);
DEFINE_CLK(0, "mcfuart.0", 24, MCF_BUSCLK);
DEFINE_CLK(0, "mcfuart.1", 25, MCF_BUSCLK);
DEFINE_CLK(0, "mcfuart.2", 26, MCF_BUSCLK);
DEFINE_CLK(0, "mcftmr.0", 28, MCF_CLK);
DEFINE_CLK(0, "mcftmr.1", 29, MCF_CLK);
DEFINE_CLK(0, "mcftmr.2", 30, MCF_CLK);
DEFINE_CLK(0, "mcftmr.3", 31, MCF_CLK);
DEFINE_CLK(0, "mcfpit.0", 32, MCF_CLK);
DEFINE_CLK(0, "mcfpit.1", 33, MCF_CLK);
DEFINE_CLK(0, "mcfeport.0", 34, MCF_CLK);
DEFINE_CLK(0, "mcfwdt.0", 35, MCF_CLK);
DEFINE_CLK(0, "pll.0", 36, MCF_CLK);
DEFINE_CLK(0, "sys.0", 40, MCF_BUSCLK);
DEFINE_CLK(0, "gpio.0", 41, MCF_BUSCLK);
DEFINE_CLK(0, "sdram.0", 42, MCF_CLK);
struct clk *mcf_clks[] = {
&__clk_0_2, /* flexbus */
&__clk_0_12, /* fec.0 */
&__clk_0_17, /* edma */
&__clk_0_18, /* intc.0 */
&__clk_0_21, /* iack.0 */
m68knommu: platform support for i2c devices on ColdFire SoC These changes based on work by Steven King <sfking@fdwdc.com> to support the i2c hardware modules on ColdFire SoC family devices. This is the per SoC hardware support. Contains a common platform device setup. Each of the SoC family members tends to have some minor local setup required to initialize the module. But all ColdFire family members use the same i2c hardware module. This i2c hardware module is the same as used in the Freescale iMX ARM based family of SoC devices. Steven's original patches were based on using a new and different i2c-coldfire.c driver. But this is not neccessary as we can use the existing Linux i2c-imx.c driver with no change required to it. And this patch is now based on using the existing i2c-imx driver. This patch only contains the ColdFire platform changes. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Tested-by: Angelo Dureghello <angelo@sysam.it>
2014-06-30 16:53:19 +00:00
&__clk_0_22, /* imx1-i2c.0 */
m68knommu: Add clk definitions for m520x. The 520x has individually controllable clocks for its peripherals. Add clk definitions for these and add default initialization of either enabled or disabled for all of the clocks. Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-06-17 07:34:00 +00:00
&__clk_0_23, /* mcfqspi.0 */
&__clk_0_24, /* mcfuart.0 */
&__clk_0_25, /* mcfuart.1 */
&__clk_0_26, /* mcfuart.2 */
&__clk_0_28, /* mcftmr.0 */
&__clk_0_29, /* mcftmr.1 */
&__clk_0_30, /* mcftmr.2 */
&__clk_0_31, /* mcftmr.3 */
&__clk_0_32, /* mcfpit.0 */
&__clk_0_33, /* mcfpit.1 */
&__clk_0_34, /* mcfeport.0 */
&__clk_0_35, /* mcfwdt.0 */
&__clk_0_36, /* pll.0 */
&__clk_0_40, /* sys.0 */
&__clk_0_41, /* gpio.0 */
&__clk_0_42, /* sdram.0 */
m68knommu: platform support for i2c devices on ColdFire SoC These changes based on work by Steven King <sfking@fdwdc.com> to support the i2c hardware modules on ColdFire SoC family devices. This is the per SoC hardware support. Contains a common platform device setup. Each of the SoC family members tends to have some minor local setup required to initialize the module. But all ColdFire family members use the same i2c hardware module. This i2c hardware module is the same as used in the Freescale iMX ARM based family of SoC devices. Steven's original patches were based on using a new and different i2c-coldfire.c driver. But this is not neccessary as we can use the existing Linux i2c-imx.c driver with no change required to it. And this patch is now based on using the existing i2c-imx driver. This patch only contains the ColdFire platform changes. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Tested-by: Angelo Dureghello <angelo@sysam.it>
2014-06-30 16:53:19 +00:00
NULL,
m68knommu: Add clk definitions for m520x. The 520x has individually controllable clocks for its peripherals. Add clk definitions for these and add default initialization of either enabled or disabled for all of the clocks. Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-06-17 07:34:00 +00:00
};
static struct clk * const enable_clks[] __initconst = {
&__clk_0_2, /* flexbus */
&__clk_0_18, /* intc.0 */
&__clk_0_21, /* iack.0 */
&__clk_0_24, /* mcfuart.0 */
&__clk_0_25, /* mcfuart.1 */
&__clk_0_26, /* mcfuart.2 */
&__clk_0_32, /* mcfpit.0 */
&__clk_0_33, /* mcfpit.1 */
&__clk_0_34, /* mcfeport.0 */
&__clk_0_36, /* pll.0 */
&__clk_0_40, /* sys.0 */
&__clk_0_41, /* gpio.0 */
&__clk_0_42, /* sdram.0 */
};
static struct clk * const disable_clks[] __initconst = {
&__clk_0_12, /* fec.0 */
&__clk_0_17, /* edma */
m68knommu: platform support for i2c devices on ColdFire SoC These changes based on work by Steven King <sfking@fdwdc.com> to support the i2c hardware modules on ColdFire SoC family devices. This is the per SoC hardware support. Contains a common platform device setup. Each of the SoC family members tends to have some minor local setup required to initialize the module. But all ColdFire family members use the same i2c hardware module. This i2c hardware module is the same as used in the Freescale iMX ARM based family of SoC devices. Steven's original patches were based on using a new and different i2c-coldfire.c driver. But this is not neccessary as we can use the existing Linux i2c-imx.c driver with no change required to it. And this patch is now based on using the existing i2c-imx driver. This patch only contains the ColdFire platform changes. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Tested-by: Angelo Dureghello <angelo@sysam.it>
2014-06-30 16:53:19 +00:00
&__clk_0_22, /* imx1-i2c.0 */
m68knommu: Add clk definitions for m520x. The 520x has individually controllable clocks for its peripherals. Add clk definitions for these and add default initialization of either enabled or disabled for all of the clocks. Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-06-17 07:34:00 +00:00
&__clk_0_23, /* mcfqspi.0 */
&__clk_0_28, /* mcftmr.0 */
&__clk_0_29, /* mcftmr.1 */
&__clk_0_30, /* mcftmr.2 */
&__clk_0_31, /* mcftmr.3 */
&__clk_0_35, /* mcfwdt.0 */
};
static void __init m520x_clk_init(void)
{
unsigned i;
/* make sure these clocks are enabled */
for (i = 0; i < ARRAY_SIZE(enable_clks); ++i)
__clk_init_enabled(enable_clks[i]);
/* make sure these clocks are disabled */
for (i = 0; i < ARRAY_SIZE(disable_clks); ++i)
__clk_init_disabled(disable_clks[i]);
}
[PATCH] m68knommu: platform config code for 5208 ColdFire Platform configuration code for the Freescale 5208 ColdFire processor. Patch originally from Matt Waddel (from code originally written by Mike Lavender). Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 04:09:50 +00:00
/***************************************************************************/
m68knommu: Coldfire QSPI platform support Since Grant has added the coldfire-qspi driver to next-spi, here is the platform support for the parts that have qspi hardware. This sets up gpio to do the spi chip select using the default chip select pins; it should be trivial for boards that require different or additional spi chip selects to use other gpios as needed. Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-01-22 20:43:03 +00:00
static void __init m520x_qspi_init(void)
{
m68knommu: qspi declutter. Move the check for the QSPI config option inside the function body. If the option is not enabled, the compiler will optimize away the empty function body so we can remove the other check for the config option. Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2014-05-14 17:07:55 +00:00
#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
m68knommu: Coldfire QSPI platform support Since Grant has added the coldfire-qspi driver to next-spi, here is the platform support for the parts that have qspi hardware. This sets up gpio to do the spi chip select using the default chip select pins; it should be trivial for boards that require different or additional spi chip selects to use other gpios as needed. Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-01-22 20:43:03 +00:00
u16 par;
/* setup Port QS for QSPI with gpio CS control */
m68knommu: remove MBAR and IPSBAR hacks for the ColdFire 520x CPUs The ColdFire 5207 and 5208 CPUs have fixed peripheral addresses. They do not use the setable peripheral address registers like the MBAR and IPSBAR used on many other ColdFire parts. Don't use fake values of MBAR and IPSBAR when using peripheral addresses for them, there is no need to. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-03-05 13:50:37 +00:00
writeb(0x3f, MCF_GPIO_PAR_QSPI);
m68knommu: Coldfire QSPI platform support Since Grant has added the coldfire-qspi driver to next-spi, here is the platform support for the parts that have qspi hardware. This sets up gpio to do the spi chip select using the default chip select pins; it should be trivial for boards that require different or additional spi chip selects to use other gpios as needed. Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-01-22 20:43:03 +00:00
/* make U1CTS and U2RTS gpio for cs_control */
m68knommu: remove MBAR and IPSBAR hacks for the ColdFire 520x CPUs The ColdFire 5207 and 5208 CPUs have fixed peripheral addresses. They do not use the setable peripheral address registers like the MBAR and IPSBAR used on many other ColdFire parts. Don't use fake values of MBAR and IPSBAR when using peripheral addresses for them, there is no need to. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-03-05 13:50:37 +00:00
par = readw(MCF_GPIO_PAR_UART);
m68knommu: Coldfire QSPI platform support Since Grant has added the coldfire-qspi driver to next-spi, here is the platform support for the parts that have qspi hardware. This sets up gpio to do the spi chip select using the default chip select pins; it should be trivial for boards that require different or additional spi chip selects to use other gpios as needed. Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-01-22 20:43:03 +00:00
par &= 0x00ff;
m68knommu: remove MBAR and IPSBAR hacks for the ColdFire 520x CPUs The ColdFire 5207 and 5208 CPUs have fixed peripheral addresses. They do not use the setable peripheral address registers like the MBAR and IPSBAR used on many other ColdFire parts. Don't use fake values of MBAR and IPSBAR when using peripheral addresses for them, there is no need to. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-03-05 13:50:37 +00:00
writew(par, MCF_GPIO_PAR_UART);
m68knommu: enable qspi support when SPI_COLDFIRE_QSPI = m Enable Coldfire QSPI support when SPI_COLDFIRE_QSPI is built as a module. This version of the patch combines changes to the config files and device.c and uses IF_ENABLED (thanks to Sam Ravnborg for the suggestion). Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-06 19:22:53 +00:00
#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
m68knommu: qspi declutter. Move the check for the QSPI config option inside the function body. If the option is not enabled, the compiler will optimize away the empty function body so we can remove the other check for the config option. Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2014-05-14 17:07:55 +00:00
}
m68knommu: platform setup for 520x ColdFire parts Switch to platform style configuration for 520x ColdFire parts. Initial support is for the UARTs. DMA support moved to common code for all ColdFire parts. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01 07:34:10 +00:00
/***************************************************************************/
m68knommu: platform support for i2c devices on ColdFire SoC These changes based on work by Steven King <sfking@fdwdc.com> to support the i2c hardware modules on ColdFire SoC family devices. This is the per SoC hardware support. Contains a common platform device setup. Each of the SoC family members tends to have some minor local setup required to initialize the module. But all ColdFire family members use the same i2c hardware module. This i2c hardware module is the same as used in the Freescale iMX ARM based family of SoC devices. Steven's original patches were based on using a new and different i2c-coldfire.c driver. But this is not neccessary as we can use the existing Linux i2c-imx.c driver with no change required to it. And this patch is now based on using the existing i2c-imx driver. This patch only contains the ColdFire platform changes. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Tested-by: Angelo Dureghello <angelo@sysam.it>
2014-06-30 16:53:19 +00:00
static void __init m520x_i2c_init(void)
{
#if IS_ENABLED(CONFIG_I2C_IMX)
u8 par;
/* setup Port FECI2C Pin Assignment Register for I2C */
/* set PAR_SCL to SCL and PAR_SDA to SDA */
par = readb(MCF_GPIO_PAR_FECI2C);
par |= 0x0f;
writeb(par, MCF_GPIO_PAR_FECI2C);
#endif /* IS_ENABLED(CONFIG_I2C_IMX) */
}
/***************************************************************************/
m68knommu: simplify the 520x UART setup code Simplify the UART setup code so that it no longer loops for each UART present. Just make it do all the work it needs in a single function. This will make the code easier to share when we move to a single set of platform data for ColdFire UARTs. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-12-23 14:53:54 +00:00
static void __init m520x_uarts_init(void)
m68knommu: platform setup for 520x ColdFire parts Switch to platform style configuration for 520x ColdFire parts. Initial support is for the UARTs. DMA support moved to common code for all ColdFire parts. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01 07:34:10 +00:00
{
u16 par;
u8 par2;
m68knommu: simplify the 520x UART setup code Simplify the UART setup code so that it no longer loops for each UART present. Just make it do all the work it needs in a single function. This will make the code easier to share when we move to a single set of platform data for ColdFire UARTs. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-12-23 14:53:54 +00:00
/* UART0 and UART1 GPIO pin setup */
par = readw(MCF_GPIO_PAR_UART);
par |= MCF_GPIO_PAR_UART_PAR_UTXD0 | MCF_GPIO_PAR_UART_PAR_URXD0;
par |= MCF_GPIO_PAR_UART_PAR_UTXD1 | MCF_GPIO_PAR_UART_PAR_URXD1;
writew(par, MCF_GPIO_PAR_UART);
m68knommu: platform setup for 520x ColdFire parts Switch to platform style configuration for 520x ColdFire parts. Initial support is for the UARTs. DMA support moved to common code for all ColdFire parts. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01 07:34:10 +00:00
m68knommu: simplify the 520x UART setup code Simplify the UART setup code so that it no longer loops for each UART present. Just make it do all the work it needs in a single function. This will make the code easier to share when we move to a single set of platform data for ColdFire UARTs. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-12-23 14:53:54 +00:00
/* UART1 GPIO pin setup */
par2 = readb(MCF_GPIO_PAR_FECI2C);
par2 &= ~0x0F;
par2 |= MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 |
MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2;
writeb(par2, MCF_GPIO_PAR_FECI2C);
m68knommu: platform setup for 520x ColdFire parts Switch to platform style configuration for 520x ColdFire parts. Initial support is for the UARTs. DMA support moved to common code for all ColdFire parts. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01 07:34:10 +00:00
}
[PATCH] m68knommu: platform config code for 5208 ColdFire Platform configuration code for the Freescale 5208 ColdFire processor. Patch originally from Matt Waddel (from code originally written by Mike Lavender). Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 04:09:50 +00:00
/***************************************************************************/
fec: add FEC platform support to ColdFire CPU's setup code m68knommu: add FEC platform support to ColdFire CPU's setup code Move the per-CPU FEC driver setup code into the actual platform setup code for each ColdFire CPU varient. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-27 06:40:38 +00:00
static void __init m520x_fec_init(void)
{
u8 v;
/* Set multi-function pins to ethernet mode */
m68knommu: remove MBAR and IPSBAR hacks for the ColdFire 520x CPUs The ColdFire 5207 and 5208 CPUs have fixed peripheral addresses. They do not use the setable peripheral address registers like the MBAR and IPSBAR used on many other ColdFire parts. Don't use fake values of MBAR and IPSBAR when using peripheral addresses for them, there is no need to. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-03-05 13:50:37 +00:00
v = readb(MCF_GPIO_PAR_FEC);
writeb(v | 0xf0, MCF_GPIO_PAR_FEC);
fec: add FEC platform support to ColdFire CPU's setup code m68knommu: add FEC platform support to ColdFire CPU's setup code Move the per-CPU FEC driver setup code into the actual platform setup code for each ColdFire CPU varient. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-27 06:40:38 +00:00
m68knommu: remove MBAR and IPSBAR hacks for the ColdFire 520x CPUs The ColdFire 5207 and 5208 CPUs have fixed peripheral addresses. They do not use the setable peripheral address registers like the MBAR and IPSBAR used on many other ColdFire parts. Don't use fake values of MBAR and IPSBAR when using peripheral addresses for them, there is no need to. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-03-05 13:50:37 +00:00
v = readb(MCF_GPIO_PAR_FECI2C);
writeb(v | 0x0f, MCF_GPIO_PAR_FECI2C);
fec: add FEC platform support to ColdFire CPU's setup code m68knommu: add FEC platform support to ColdFire CPU's setup code Move the per-CPU FEC driver setup code into the actual platform setup code for each ColdFire CPU varient. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-27 06:40:38 +00:00
}
/***************************************************************************/
m68knommu: platform setup for 520x ColdFire parts Switch to platform style configuration for 520x ColdFire parts. Initial support is for the UARTs. DMA support moved to common code for all ColdFire parts. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01 07:34:10 +00:00
void __init config_BSP(char *commandp, int size)
[PATCH] m68knommu: platform config code for 5208 ColdFire Platform configuration code for the Freescale 5208 ColdFire processor. Patch originally from Matt Waddel (from code originally written by Mike Lavender). Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 04:09:50 +00:00
{
m68knommu: modify timer init code to make it consistent with m68k code With a few small changes we can make the m68knommu timer init code the same as the m68k code. By using the mach_sched_init function pointer and reworking the current timer initializers to keep track of the common m68k timer_interrupt() handler we end up with almost identical code for m68knommu. This will allow us to more easily merge the mmu and non-mmu m68k time.c in future patches. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-01-23 05:34:58 +00:00
mach_sched_init = hw_timer_init;
m68knommu: Add clk definitions for m520x. The 520x has individually controllable clocks for its peripherals. Add clk definitions for these and add default initialization of either enabled or disabled for all of the clocks. Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-06-17 07:34:00 +00:00
m520x_clk_init();
m68knommu: platform setup for 520x ColdFire parts Switch to platform style configuration for 520x ColdFire parts. Initial support is for the UARTs. DMA support moved to common code for all ColdFire parts. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01 07:34:10 +00:00
m520x_uarts_init();
fec: add FEC platform support to ColdFire CPU's setup code m68knommu: add FEC platform support to ColdFire CPU's setup code Move the per-CPU FEC driver setup code into the actual platform setup code for each ColdFire CPU varient. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-27 06:40:38 +00:00
m520x_fec_init();
m68knommu: Coldfire QSPI platform support Since Grant has added the coldfire-qspi driver to next-spi, here is the platform support for the parts that have qspi hardware. This sets up gpio to do the spi chip select using the default chip select pins; it should be trivial for boards that require different or additional spi chip selects to use other gpios as needed. Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-01-22 20:43:03 +00:00
m520x_qspi_init();
m68knommu: platform support for i2c devices on ColdFire SoC These changes based on work by Steven King <sfking@fdwdc.com> to support the i2c hardware modules on ColdFire SoC family devices. This is the per SoC hardware support. Contains a common platform device setup. Each of the SoC family members tends to have some minor local setup required to initialize the module. But all ColdFire family members use the same i2c hardware module. This i2c hardware module is the same as used in the Freescale iMX ARM based family of SoC devices. Steven's original patches were based on using a new and different i2c-coldfire.c driver. But this is not neccessary as we can use the existing Linux i2c-imx.c driver with no change required to it. And this patch is now based on using the existing i2c-imx driver. This patch only contains the ColdFire platform changes. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Tested-by: Angelo Dureghello <angelo@sysam.it>
2014-06-30 16:53:19 +00:00
m520x_i2c_init();
[PATCH] m68knommu: platform config code for 5208 ColdFire Platform configuration code for the Freescale 5208 ColdFire processor. Patch originally from Matt Waddel (from code originally written by Mike Lavender). Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 04:09:50 +00:00
}
/***************************************************************************/
Reference in New Issue Copy Permalink