2013-03-26 11:22:21 +00:00
|
|
|
Samsung S5P/EXYNOS SoC Camera Subsystem (FIMC)
|
|
|
|
----------------------------------------------
|
|
|
|
|
|
|
|
The S5P/Exynos SoC Camera subsystem comprises of multiple sub-devices
|
|
|
|
represented by separate device tree nodes. Currently this includes: FIMC (in
|
|
|
|
the S5P SoCs series known as CAMIF), MIPI CSIS, FIMC-LITE and FIMC-IS (ISP).
|
|
|
|
|
|
|
|
The sub-subdevices are defined as child nodes of the common 'camera' node which
|
|
|
|
also includes common properties of the whole subsystem not really specific to
|
|
|
|
any single sub-device, like common camera port pins or the CAMCLK clock outputs
|
|
|
|
for external image sensors attached to an SoC.
|
|
|
|
|
|
|
|
Common 'camera' node
|
|
|
|
--------------------
|
|
|
|
|
|
|
|
Required properties:
|
|
|
|
|
|
|
|
- compatible : must be "samsung,fimc", "simple-bus"
|
|
|
|
- clocks : list of clock specifiers, corresponding to entries in
|
|
|
|
clock-names property;
|
|
|
|
- clock-names : must contain "fimc", "sclk_fimc" entries, matching entries
|
|
|
|
in the clocks property.
|
|
|
|
|
|
|
|
The 'camera' node must include at least one 'fimc' child node.
|
|
|
|
|
|
|
|
|
|
|
|
'fimc' device nodes
|
|
|
|
-------------------
|
|
|
|
|
|
|
|
Required properties:
|
|
|
|
|
|
|
|
- compatible: "samsung,s5pv210-fimc" for S5PV210, "samsung,exynos4210-fimc"
|
|
|
|
for Exynos4210 and "samsung,exynos4212-fimc" for Exynos4x12 SoCs;
|
|
|
|
- reg: physical base address and length of the registers set for the device;
|
|
|
|
- interrupts: should contain FIMC interrupt;
|
|
|
|
- clocks: list of clock specifiers, must contain an entry for each required
|
|
|
|
entry in clock-names;
|
|
|
|
- clock-names: must include "fimc", "sclk_fimc", "mux" entries and optionally
|
|
|
|
"parent" entry.
|
|
|
|
- samsung,pix-limits: an array of maximum supported image sizes in pixels, for
|
|
|
|
details refer to Table 2-1 in the S5PV210 SoC User Manual; The meaning of
|
|
|
|
each cell is as follows:
|
|
|
|
0 - scaler input horizontal size,
|
|
|
|
1 - input horizontal size for the scaler bypassed,
|
|
|
|
2 - REAL_WIDTH without input rotation,
|
|
|
|
3 - REAL_HEIGHT with input rotation,
|
|
|
|
- samsung,sysreg: a phandle to the SYSREG node.
|
|
|
|
|
|
|
|
Each FIMC device should have an alias in the aliases node, in the form of
|
|
|
|
fimc<n>, where <n> is an integer specifying the IP block instance.
|
|
|
|
|
|
|
|
Optional properties:
|
|
|
|
|
|
|
|
- clock-frequency: maximum FIMC local clock (LCLK) frequency;
|
|
|
|
- samsung,min-pix-sizes: an array specyfing minimum image size in pixels at
|
|
|
|
the FIMC input and output DMA, in the first and second cell respectively.
|
|
|
|
Default value when this property is not present is <16 16>;
|
|
|
|
- samsung,min-pix-alignment: minimum supported image height alignment (first
|
|
|
|
cell) and the horizontal image offset (second cell). The values are in pixels
|
|
|
|
and default to <2 1> when this property is not present;
|
|
|
|
- samsung,mainscaler-ext: a boolean property indicating whether the FIMC IP
|
|
|
|
supports extended image size and has CIEXTEN register;
|
|
|
|
- samsung,rotators: a bitmask specifying whether this IP has the input and
|
|
|
|
the output rotator. Bits 4 and 0 correspond to input and output rotator
|
|
|
|
respectively. If a rotator is present its corresponding bit should be set.
|
|
|
|
Default value when this property is not specified is 0x11.
|
|
|
|
- samsung,cam-if: a bolean property indicating whether the IP block includes
|
|
|
|
the camera input interface.
|
|
|
|
- samsung,isp-wb: this property must be present if the IP block has the ISP
|
|
|
|
writeback input.
|
|
|
|
- samsung,lcd-wb: this property must be present if the IP block has the LCD
|
|
|
|
writeback input.
|
|
|
|
|
|
|
|
|
2013-03-29 17:12:39 +00:00
|
|
|
'parallel-ports' node
|
|
|
|
---------------------
|
|
|
|
|
|
|
|
This node should contain child 'port' nodes specifying active parallel video
|
|
|
|
input ports. It includes camera A and camera B inputs. 'reg' property in the
|
|
|
|
port nodes specifies data input - 0, 1 indicates input A, B respectively.
|
|
|
|
|
|
|
|
Optional properties
|
|
|
|
|
|
|
|
- samsung,camclk-out : specifies clock output for remote sensor,
|
|
|
|
0 - CAM_A_CLKOUT, 1 - CAM_B_CLKOUT;
|
|
|
|
|
|
|
|
Image sensor nodes
|
|
|
|
------------------
|
|
|
|
|
|
|
|
The sensor device nodes should be added to their control bus controller (e.g.
|
|
|
|
I2C0) nodes and linked to a port node in the csis or the parallel-ports node,
|
|
|
|
using the common video interfaces bindings, defined in video-interfaces.txt.
|
|
|
|
The implementation of this bindings requires clock-frequency property to be
|
|
|
|
present in the sensor device nodes.
|
|
|
|
|
2013-03-26 11:22:21 +00:00
|
|
|
Example:
|
|
|
|
|
|
|
|
aliases {
|
|
|
|
fimc0 = &fimc_0;
|
|
|
|
};
|
|
|
|
|
2013-03-29 17:12:39 +00:00
|
|
|
/* Parallel bus IF sensor */
|
|
|
|
i2c_0: i2c@13860000 {
|
|
|
|
s5k6aa: sensor@3c {
|
|
|
|
compatible = "samsung,s5k6aafx";
|
|
|
|
reg = <0x3c>;
|
|
|
|
vddio-supply = <...>;
|
|
|
|
|
|
|
|
clock-frequency = <24000000>;
|
|
|
|
clocks = <...>;
|
|
|
|
clock-names = "mclk";
|
|
|
|
|
|
|
|
port {
|
|
|
|
s5k6aa_ep: endpoint {
|
|
|
|
remote-endpoint = <&fimc0_ep>;
|
|
|
|
bus-width = <8>;
|
|
|
|
hsync-active = <0>;
|
|
|
|
vsync-active = <1>;
|
|
|
|
pclk-sample = <1>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
/* MIPI CSI-2 bus IF sensor */
|
|
|
|
s5c73m3: sensor@0x1a {
|
|
|
|
compatible = "samsung,s5c73m3";
|
|
|
|
reg = <0x1a>;
|
|
|
|
vddio-supply = <...>;
|
|
|
|
|
|
|
|
clock-frequency = <24000000>;
|
|
|
|
clocks = <...>;
|
|
|
|
clock-names = "mclk";
|
|
|
|
|
|
|
|
port {
|
|
|
|
s5c73m3_1: endpoint {
|
|
|
|
data-lanes = <1 2 3 4>;
|
|
|
|
remote-endpoint = <&csis0_ep>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
2013-03-26 11:22:21 +00:00
|
|
|
camera {
|
|
|
|
compatible = "samsung,fimc", "simple-bus";
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <1>;
|
|
|
|
status = "okay";
|
|
|
|
|
2013-03-29 17:12:39 +00:00
|
|
|
/* parallel camera ports */
|
|
|
|
parallel-ports {
|
|
|
|
/* camera A input */
|
|
|
|
port@0 {
|
|
|
|
reg = <0>;
|
|
|
|
fimc0_ep: endpoint {
|
|
|
|
remote-endpoint = <&s5k6aa_ep>;
|
|
|
|
bus-width = <8>;
|
|
|
|
hsync-active = <0>;
|
|
|
|
vsync-active = <1>;
|
|
|
|
pclk-sample = <1>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
2013-03-26 11:22:21 +00:00
|
|
|
fimc_0: fimc@11800000 {
|
|
|
|
compatible = "samsung,exynos4210-fimc";
|
|
|
|
reg = <0x11800000 0x1000>;
|
|
|
|
interrupts = <0 85 0>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
csis_0: csis@11880000 {
|
|
|
|
compatible = "samsung,exynos4210-csis";
|
|
|
|
reg = <0x11880000 0x1000>;
|
|
|
|
interrupts = <0 78 0>;
|
2013-03-29 17:12:39 +00:00
|
|
|
/* camera C input */
|
|
|
|
port@3 {
|
|
|
|
reg = <3>;
|
|
|
|
csis0_ep: endpoint {
|
|
|
|
remote-endpoint = <&s5c73m3_ep>;
|
|
|
|
data-lanes = <1 2 3 4>;
|
|
|
|
samsung,csis-hs-settle = <12>;
|
|
|
|
};
|
|
|
|
};
|
2013-03-26 11:22:21 +00:00
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
The MIPI-CSIS device binding is defined in samsung-mipi-csis.txt.
|