linux/drivers/mfd/twl-core.c

963 lines
24 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* twl_core.c - driver for TWL4030/TWL5030/TWL60X0/TPS659x0 PM
* and audio CODEC devices
*
* Copyright (C) 2005-2006 Texas Instruments, Inc.
*
* Modifications to defer interrupt handling to a kernel thread:
* Copyright (C) 2006 MontaVista Software, Inc.
*
* Based on tlv320aic23.c:
* Copyright (c) by Kai Svahn <kai.svahn@nokia.com>
*
* Code cleanup and modifications to IRQ handler.
* by syed khasim <x0khasim@ti.com>
*/
#include <linux/init.h>
#include <linux/mutex.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/device.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/regulator/machine.h>
#include <linux/i2c.h>
#include <linux/mfd/twl.h>
/* Register descriptions for audio */
#include <linux/mfd/twl4030-audio.h>
#include "twl-core.h"
/*
* The TWL4030 "Triton 2" is one of a family of a multi-function "Power
* Management and System Companion Device" chips originally designed for
* use in OMAP2 and OMAP 3 based systems. Its control interfaces use I2C,
* often at around 3 Mbit/sec, including for interrupt handling.
*
* This driver core provides genirq support for the interrupts emitted,
* by the various modules, and exports register access primitives.
*
* FIXME this driver currently requires use of the first interrupt line
* (and associated registers).
*/
#define DRIVER_NAME "twl"
/* Triton Core internal information (BEGIN) */
/* Base Address defns for twl4030_map[] */
/* subchip/slave 0 - USB ID */
#define TWL4030_BASEADD_USB 0x0000
/* subchip/slave 1 - AUD ID */
#define TWL4030_BASEADD_AUDIO_VOICE 0x0000
#define TWL4030_BASEADD_GPIO 0x0098
#define TWL4030_BASEADD_INTBR 0x0085
#define TWL4030_BASEADD_PIH 0x0080
#define TWL4030_BASEADD_TEST 0x004C
/* subchip/slave 2 - AUX ID */
#define TWL4030_BASEADD_INTERRUPTS 0x00B9
#define TWL4030_BASEADD_LED 0x00EE
#define TWL4030_BASEADD_MADC 0x0000
#define TWL4030_BASEADD_MAIN_CHARGE 0x0074
#define TWL4030_BASEADD_PRECHARGE 0x00AA
#define TWL4030_BASEADD_PWM 0x00F8
#define TWL4030_BASEADD_KEYPAD 0x00D2
#define TWL5031_BASEADD_ACCESSORY 0x0074 /* Replaces Main Charge */
#define TWL5031_BASEADD_INTERRUPTS 0x00B9 /* Different than TWL4030's
one */
/* subchip/slave 3 - POWER ID */
#define TWL4030_BASEADD_BACKUP 0x0014
#define TWL4030_BASEADD_INT 0x002E
#define TWL4030_BASEADD_PM_MASTER 0x0036
#define TWL4030_BASEADD_PM_RECEIVER 0x005B
#define TWL4030_DCDC_GLOBAL_CFG 0x06
#define SMARTREFLEX_ENABLE BIT(3)
#define TWL4030_BASEADD_RTC 0x001C
#define TWL4030_BASEADD_SECURED_REG 0x0000
/* Triton Core internal information (END) */
/* subchip/slave 0 0x48 - POWER */
#define TWL6030_BASEADD_RTC 0x0000
#define TWL6030_BASEADD_SECURED_REG 0x0017
#define TWL6030_BASEADD_PM_MASTER 0x001F
#define TWL6030_BASEADD_PM_SLAVE_MISC 0x0030 /* PM_RECEIVER */
#define TWL6030_BASEADD_PM_MISC 0x00E2
#define TWL6030_BASEADD_PM_PUPD 0x00F0
/* subchip/slave 1 0x49 - FEATURE */
#define TWL6030_BASEADD_USB 0x0000
#define TWL6030_BASEADD_GPADC_CTRL 0x002E
#define TWL6030_BASEADD_AUX 0x0090
#define TWL6030_BASEADD_PWM 0x00BA
#define TWL6030_BASEADD_GASGAUGE 0x00C0
#define TWL6030_BASEADD_PIH 0x00D0
#define TWL6030_BASEADD_CHARGER 0x00E0
#define TWL6032_BASEADD_CHARGER 0x00DA
#define TWL6030_BASEADD_LED 0x00F4
/* subchip/slave 2 0x4A - DFT */
#define TWL6030_BASEADD_DIEID 0x00C0
/* subchip/slave 3 0x4B - AUDIO */
#define TWL6030_BASEADD_AUDIO 0x0000
#define TWL6030_BASEADD_RSV 0x0000
#define TWL6030_BASEADD_ZERO 0x0000
/* Few power values */
#define R_CFG_BOOT 0x05
/* some fields in R_CFG_BOOT */
#define HFCLK_FREQ_19p2_MHZ (1 << 0)
#define HFCLK_FREQ_26_MHZ (2 << 0)
#define HFCLK_FREQ_38p4_MHZ (3 << 0)
#define HIGH_PERF_SQ (1 << 3)
#define CK32K_LOWPWR_EN (1 << 7)
/*----------------------------------------------------------------------*/
/* Structure for each TWL4030/TWL6030 Slave */
struct twl_client {
struct i2c_client *client;
struct regmap *regmap;
};
/* mapping the module id to slave id and base address */
struct twl_mapping {
unsigned char sid; /* Slave ID */
unsigned char base; /* base address */
};
struct twl_private {
bool ready; /* The core driver is ready to be used */
u32 twl_idcode; /* TWL IDCODE Register value */
unsigned int twl_id;
struct twl_mapping *twl_map;
struct twl_client *twl_modules;
};
static struct twl_private *twl_priv;
static struct twl_mapping twl4030_map[] = {
/*
* NOTE: don't change this table without updating the
* <linux/mfd/twl.h> defines for TWL4030_MODULE_*
* so they continue to match the order in this table.
*/
/* Common IPs */
{ 0, TWL4030_BASEADD_USB },
{ 1, TWL4030_BASEADD_PIH },
{ 2, TWL4030_BASEADD_MAIN_CHARGE },
{ 3, TWL4030_BASEADD_PM_MASTER },
{ 3, TWL4030_BASEADD_PM_RECEIVER },
{ 3, TWL4030_BASEADD_RTC },
{ 2, TWL4030_BASEADD_PWM },
{ 2, TWL4030_BASEADD_LED },
{ 3, TWL4030_BASEADD_SECURED_REG },
/* TWL4030 specific IPs */
{ 1, TWL4030_BASEADD_AUDIO_VOICE },
{ 1, TWL4030_BASEADD_GPIO },
{ 1, TWL4030_BASEADD_INTBR },
{ 1, TWL4030_BASEADD_TEST },
{ 2, TWL4030_BASEADD_KEYPAD },
{ 2, TWL4030_BASEADD_MADC },
{ 2, TWL4030_BASEADD_INTERRUPTS },
{ 2, TWL4030_BASEADD_PRECHARGE },
{ 3, TWL4030_BASEADD_BACKUP },
{ 3, TWL4030_BASEADD_INT },
{ 2, TWL5031_BASEADD_ACCESSORY },
{ 2, TWL5031_BASEADD_INTERRUPTS },
};
static const struct reg_default twl4030_49_defaults[] = {
/* Audio Registers */
{ 0x01, 0x00}, /* CODEC_MODE */
{ 0x02, 0x00}, /* OPTION */
/* 0x03 Unused */
{ 0x04, 0x00}, /* MICBIAS_CTL */
{ 0x05, 0x00}, /* ANAMICL */
{ 0x06, 0x00}, /* ANAMICR */
{ 0x07, 0x00}, /* AVADC_CTL */
{ 0x08, 0x00}, /* ADCMICSEL */
{ 0x09, 0x00}, /* DIGMIXING */
{ 0x0a, 0x0f}, /* ATXL1PGA */
{ 0x0b, 0x0f}, /* ATXR1PGA */
{ 0x0c, 0x0f}, /* AVTXL2PGA */
{ 0x0d, 0x0f}, /* AVTXR2PGA */
{ 0x0e, 0x00}, /* AUDIO_IF */
{ 0x0f, 0x00}, /* VOICE_IF */
{ 0x10, 0x3f}, /* ARXR1PGA */
{ 0x11, 0x3f}, /* ARXL1PGA */
{ 0x12, 0x3f}, /* ARXR2PGA */
{ 0x13, 0x3f}, /* ARXL2PGA */
{ 0x14, 0x25}, /* VRXPGA */
{ 0x15, 0x00}, /* VSTPGA */
{ 0x16, 0x00}, /* VRX2ARXPGA */
{ 0x17, 0x00}, /* AVDAC_CTL */
{ 0x18, 0x00}, /* ARX2VTXPGA */
{ 0x19, 0x32}, /* ARXL1_APGA_CTL*/
{ 0x1a, 0x32}, /* ARXR1_APGA_CTL*/
{ 0x1b, 0x32}, /* ARXL2_APGA_CTL*/
{ 0x1c, 0x32}, /* ARXR2_APGA_CTL*/
{ 0x1d, 0x00}, /* ATX2ARXPGA */
{ 0x1e, 0x00}, /* BT_IF */
{ 0x1f, 0x55}, /* BTPGA */
{ 0x20, 0x00}, /* BTSTPGA */
{ 0x21, 0x00}, /* EAR_CTL */
{ 0x22, 0x00}, /* HS_SEL */
{ 0x23, 0x00}, /* HS_GAIN_SET */
{ 0x24, 0x00}, /* HS_POPN_SET */
{ 0x25, 0x00}, /* PREDL_CTL */
{ 0x26, 0x00}, /* PREDR_CTL */
{ 0x27, 0x00}, /* PRECKL_CTL */
{ 0x28, 0x00}, /* PRECKR_CTL */
{ 0x29, 0x00}, /* HFL_CTL */
{ 0x2a, 0x00}, /* HFR_CTL */
{ 0x2b, 0x05}, /* ALC_CTL */
{ 0x2c, 0x00}, /* ALC_SET1 */
{ 0x2d, 0x00}, /* ALC_SET2 */
{ 0x2e, 0x00}, /* BOOST_CTL */
{ 0x2f, 0x00}, /* SOFTVOL_CTL */
{ 0x30, 0x13}, /* DTMF_FREQSEL */
{ 0x31, 0x00}, /* DTMF_TONEXT1H */
{ 0x32, 0x00}, /* DTMF_TONEXT1L */
{ 0x33, 0x00}, /* DTMF_TONEXT2H */
{ 0x34, 0x00}, /* DTMF_TONEXT2L */
{ 0x35, 0x79}, /* DTMF_TONOFF */
{ 0x36, 0x11}, /* DTMF_WANONOFF */
{ 0x37, 0x00}, /* I2S_RX_SCRAMBLE_H */
{ 0x38, 0x00}, /* I2S_RX_SCRAMBLE_M */
{ 0x39, 0x00}, /* I2S_RX_SCRAMBLE_L */
{ 0x3a, 0x06}, /* APLL_CTL */
{ 0x3b, 0x00}, /* DTMF_CTL */
{ 0x3c, 0x44}, /* DTMF_PGA_CTL2 (0x3C) */
{ 0x3d, 0x69}, /* DTMF_PGA_CTL1 (0x3D) */
{ 0x3e, 0x00}, /* MISC_SET_1 */
{ 0x3f, 0x00}, /* PCMBTMUX */
/* 0x40 - 0x42 Unused */
{ 0x43, 0x00}, /* RX_PATH_SEL */
{ 0x44, 0x32}, /* VDL_APGA_CTL */
{ 0x45, 0x00}, /* VIBRA_CTL */
{ 0x46, 0x00}, /* VIBRA_SET */
{ 0x47, 0x00}, /* VIBRA_PWM_SET */
{ 0x48, 0x00}, /* ANAMIC_GAIN */
{ 0x49, 0x00}, /* MISC_SET_2 */
/* End of Audio Registers */
};
static bool twl4030_49_nop_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
case 0x00:
case 0x03:
case 0x40:
case 0x41:
case 0x42:
return false;
default:
return true;
}
}
static const struct regmap_range twl4030_49_volatile_ranges[] = {
regmap_reg_range(TWL4030_BASEADD_TEST, 0xff),
};
static const struct regmap_access_table twl4030_49_volatile_table = {
.yes_ranges = twl4030_49_volatile_ranges,
.n_yes_ranges = ARRAY_SIZE(twl4030_49_volatile_ranges),
};
static const struct regmap_config twl4030_regmap_config[4] = {
{
/* Address 0x48 */
.reg_bits = 8,
.val_bits = 8,
.max_register = 0xff,
},
{
/* Address 0x49 */
.reg_bits = 8,
.val_bits = 8,
.max_register = 0xff,
.readable_reg = twl4030_49_nop_reg,
.writeable_reg = twl4030_49_nop_reg,
.volatile_table = &twl4030_49_volatile_table,
.reg_defaults = twl4030_49_defaults,
.num_reg_defaults = ARRAY_SIZE(twl4030_49_defaults),
.cache_type = REGCACHE_RBTREE,
},
{
/* Address 0x4a */
.reg_bits = 8,
.val_bits = 8,
.max_register = 0xff,
},
{
/* Address 0x4b */
.reg_bits = 8,
.val_bits = 8,
.max_register = 0xff,
},
};
static struct twl_mapping twl6030_map[] = {
/*
* NOTE: don't change this table without updating the
* <linux/mfd/twl.h> defines for TWL4030_MODULE_*
* so they continue to match the order in this table.
*/
/* Common IPs */
{ 1, TWL6030_BASEADD_USB },
{ 1, TWL6030_BASEADD_PIH },
{ 1, TWL6030_BASEADD_CHARGER },
{ 0, TWL6030_BASEADD_PM_MASTER },
{ 0, TWL6030_BASEADD_PM_SLAVE_MISC },
{ 0, TWL6030_BASEADD_RTC },
{ 1, TWL6030_BASEADD_PWM },
{ 1, TWL6030_BASEADD_LED },
{ 0, TWL6030_BASEADD_SECURED_REG },
/* TWL6030 specific IPs */
{ 0, TWL6030_BASEADD_ZERO },
{ 1, TWL6030_BASEADD_ZERO },
{ 2, TWL6030_BASEADD_ZERO },
{ 1, TWL6030_BASEADD_GPADC_CTRL },
{ 1, TWL6030_BASEADD_GASGAUGE },
};
static const struct regmap_config twl6030_regmap_config[3] = {
{
/* Address 0x48 */
.reg_bits = 8,
.val_bits = 8,
.max_register = 0xff,
},
{
/* Address 0x49 */
.reg_bits = 8,
.val_bits = 8,
.max_register = 0xff,
},
{
/* Address 0x4a */
.reg_bits = 8,
.val_bits = 8,
.max_register = 0xff,
},
};
/*----------------------------------------------------------------------*/
static inline int twl_get_num_slaves(void)
{
if (twl_class_is_4030())
return 4; /* TWL4030 class have four slave address */
else
return 3; /* TWL6030 class have three slave address */
}
static inline int twl_get_last_module(void)
{
if (twl_class_is_4030())
return TWL4030_MODULE_LAST;
else
return TWL6030_MODULE_LAST;
}
/* Exported Functions */
unsigned int twl_rev(void)
{
return twl_priv ? twl_priv->twl_id : 0;
}
EXPORT_SYMBOL(twl_rev);
/**
* twl_get_regmap - Get the regmap associated with the given module
* @mod_no: module number
*
* Returns the regmap pointer or NULL in case of failure.
*/
static struct regmap *twl_get_regmap(u8 mod_no)
{
int sid;
struct twl_client *twl;
if (unlikely(!twl_priv || !twl_priv->ready)) {
pr_err("%s: not initialized\n", DRIVER_NAME);
return NULL;
}
if (unlikely(mod_no >= twl_get_last_module())) {
pr_err("%s: invalid module number %d\n", DRIVER_NAME, mod_no);
return NULL;
}
sid = twl_priv->twl_map[mod_no].sid;
twl = &twl_priv->twl_modules[sid];
return twl->regmap;
}
/**
* twl_i2c_write - Writes a n bit register in TWL4030/TWL5030/TWL60X0
* @mod_no: module number
* @value: an array of num_bytes+1 containing data to write
* @reg: register address (just offset will do)
* @num_bytes: number of bytes to transfer
*
* Returns 0 on success or else a negative error code.
*/
int twl_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes)
{
struct regmap *regmap = twl_get_regmap(mod_no);
int ret;
if (!regmap)
return -EPERM;
ret = regmap_bulk_write(regmap, twl_priv->twl_map[mod_no].base + reg,
value, num_bytes);
if (ret)
pr_err("%s: Write failed (mod %d, reg 0x%02x count %d)\n",
DRIVER_NAME, mod_no, reg, num_bytes);
return ret;
}
EXPORT_SYMBOL(twl_i2c_write);
/**
* twl_i2c_read - Reads a n bit register in TWL4030/TWL5030/TWL60X0
* @mod_no: module number
* @value: an array of num_bytes containing data to be read
* @reg: register address (just offset will do)
* @num_bytes: number of bytes to transfer
*
* Returns 0 on success or else a negative error code.
*/
int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes)
{
struct regmap *regmap = twl_get_regmap(mod_no);
int ret;
if (!regmap)
return -EPERM;
ret = regmap_bulk_read(regmap, twl_priv->twl_map[mod_no].base + reg,
value, num_bytes);
if (ret)
pr_err("%s: Read failed (mod %d, reg 0x%02x count %d)\n",
DRIVER_NAME, mod_no, reg, num_bytes);
return ret;
}
EXPORT_SYMBOL(twl_i2c_read);
/**
* twl_set_regcache_bypass - Configure the regcache bypass for the regmap associated
* with the module
* @mod_no: module number
* @enable: Regcache bypass state
*
* Returns 0 else failure.
*/
int twl_set_regcache_bypass(u8 mod_no, bool enable)
{
struct regmap *regmap = twl_get_regmap(mod_no);
if (!regmap)
return -EPERM;
regcache_cache_bypass(regmap, enable);
return 0;
}
EXPORT_SYMBOL(twl_set_regcache_bypass);
/*----------------------------------------------------------------------*/
/**
* twl_read_idcode_register - API to read the IDCODE register.
*
* Unlocks the IDCODE register and read the 32 bit value.
*/
static int twl_read_idcode_register(void)
{
int err;
err = twl_i2c_write_u8(TWL4030_MODULE_INTBR, TWL_EEPROM_R_UNLOCK,
REG_UNLOCK_TEST_REG);
if (err) {
pr_err("TWL4030 Unable to unlock IDCODE registers -%d\n", err);
goto fail;
}
err = twl_i2c_read(TWL4030_MODULE_INTBR, (u8 *)(&twl_priv->twl_idcode),
REG_IDCODE_7_0, 4);
if (err) {
pr_err("TWL4030: unable to read IDCODE -%d\n", err);
goto fail;
}
err = twl_i2c_write_u8(TWL4030_MODULE_INTBR, 0x0, REG_UNLOCK_TEST_REG);
if (err)
pr_err("TWL4030 Unable to relock IDCODE registers -%d\n", err);
fail:
return err;
}
/**
* twl_get_type - API to get TWL Si type.
*
* Api to get the TWL Si type from IDCODE value.
*/
int twl_get_type(void)
{
return TWL_SIL_TYPE(twl_priv->twl_idcode);
}
EXPORT_SYMBOL_GPL(twl_get_type);
/**
* twl_get_version - API to get TWL Si version.
*
* Api to get the TWL Si version from IDCODE value.
*/
int twl_get_version(void)
{
return TWL_SIL_REV(twl_priv->twl_idcode);
}
EXPORT_SYMBOL_GPL(twl_get_version);
/**
* twl_get_hfclk_rate - API to get TWL external HFCLK clock rate.
*
* Api to get the TWL HFCLK rate based on BOOT_CFG register.
*/
int twl_get_hfclk_rate(void)
{
u8 ctrl;
int rate;
twl_i2c_read_u8(TWL_MODULE_PM_MASTER, &ctrl, R_CFG_BOOT);
switch (ctrl & 0x3) {
case HFCLK_FREQ_19p2_MHZ:
rate = 19200000;
break;
case HFCLK_FREQ_26_MHZ:
rate = 26000000;
break;
case HFCLK_FREQ_38p4_MHZ:
rate = 38400000;
break;
default:
pr_err("TWL4030: HFCLK is not configured\n");
rate = -EINVAL;
break;
}
return rate;
}
EXPORT_SYMBOL_GPL(twl_get_hfclk_rate);
static struct device *
add_numbered_child(unsigned mod_no, const char *name, int num,
void *pdata, unsigned pdata_len,
bool can_wakeup, int irq0, int irq1)
{
struct platform_device *pdev;
struct twl_client *twl;
int status, sid;
if (unlikely(mod_no >= twl_get_last_module())) {
pr_err("%s: invalid module number %d\n", DRIVER_NAME, mod_no);
return ERR_PTR(-EPERM);
}
sid = twl_priv->twl_map[mod_no].sid;
twl = &twl_priv->twl_modules[sid];
pdev = platform_device_alloc(name, num);
if (!pdev)
return ERR_PTR(-ENOMEM);
pdev->dev.parent = &twl->client->dev;
if (pdata) {
status = platform_device_add_data(pdev, pdata, pdata_len);
if (status < 0) {
dev_dbg(&pdev->dev, "can't add platform_data\n");
goto put_device;
}
}
if (irq0) {
struct resource r[2] = {
{ .start = irq0, .flags = IORESOURCE_IRQ, },
{ .start = irq1, .flags = IORESOURCE_IRQ, },
};
status = platform_device_add_resources(pdev, r, irq1 ? 2 : 1);
if (status < 0) {
dev_dbg(&pdev->dev, "can't add irqs\n");
goto put_device;
}
}
status = platform_device_add(pdev);
if (status)
goto put_device;
device_init_wakeup(&pdev->dev, can_wakeup);
return &pdev->dev;
put_device:
platform_device_put(pdev);
dev_err(&twl->client->dev, "failed to add device %s\n", name);
return ERR_PTR(status);
}
static inline struct device *add_child(unsigned mod_no, const char *name,
void *pdata, unsigned pdata_len,
bool can_wakeup, int irq0, int irq1)
{
return add_numbered_child(mod_no, name, -1, pdata, pdata_len,
can_wakeup, irq0, irq1);
}
/*----------------------------------------------------------------------*/
/*
* These three functions initialize the on-chip clock framework,
* letting it generate the right frequencies for USB, MADC, and
* other purposes.
*/
static inline int protect_pm_master(void)
{
int e = 0;
e = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, 0,
TWL4030_PM_MASTER_PROTECT_KEY);
return e;
}
static inline int unprotect_pm_master(void)
{
int e = 0;
e |= twl_i2c_write_u8(TWL_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG1,
TWL4030_PM_MASTER_PROTECT_KEY);
e |= twl_i2c_write_u8(TWL_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG2,
TWL4030_PM_MASTER_PROTECT_KEY);
return e;
}
static void clocks_init(struct device *dev)
{
int e = 0;
struct clk *osc;
u32 rate;
u8 ctrl = HFCLK_FREQ_26_MHZ;
osc = clk_get(dev, "fck");
if (IS_ERR(osc)) {
printk(KERN_WARNING "Skipping twl internal clock init and "
"using bootloader value (unknown osc rate)\n");
return;
}
rate = clk_get_rate(osc);
clk_put(osc);
switch (rate) {
case 19200000:
ctrl = HFCLK_FREQ_19p2_MHZ;
break;
case 26000000:
ctrl = HFCLK_FREQ_26_MHZ;
break;
case 38400000:
ctrl = HFCLK_FREQ_38p4_MHZ;
break;
}
ctrl |= HIGH_PERF_SQ;
e |= unprotect_pm_master();
/* effect->MADC+USB ck en */
e |= twl_i2c_write_u8(TWL_MODULE_PM_MASTER, ctrl, R_CFG_BOOT);
e |= protect_pm_master();
if (e < 0)
pr_err("%s: clock init err [%d]\n", DRIVER_NAME, e);
}
/*----------------------------------------------------------------------*/
i2c: Make remove callback return void The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-15 08:02:30 +00:00
static void twl_remove(struct i2c_client *client)
{
unsigned i, num_slaves;
if (twl_class_is_4030())
twl4030_exit_irq();
else
twl6030_exit_irq();
num_slaves = twl_get_num_slaves();
for (i = 0; i < num_slaves; i++) {
struct twl_client *twl = &twl_priv->twl_modules[i];
if (twl->client && twl->client != client)
i2c_unregister_device(twl->client);
twl->client = NULL;
}
twl_priv->ready = false;
}
static struct of_dev_auxdata twl_auxdata_lookup[] = {
OF_DEV_AUXDATA("ti,twl4030-gpio", 0, "twl4030-gpio", NULL),
{ /* sentinel */ },
};
/* NOTE: This driver only handles a single twl4030/tps659x0 chip */
static int
twl_probe(struct i2c_client *client)
{
const struct i2c_device_id *id = i2c_client_get_device_id(client);
struct device_node *node = client->dev.of_node;
struct platform_device *pdev;
const struct regmap_config *twl_regmap_config;
int irq_base = 0;
int status;
unsigned i, num_slaves;
if (!node) {
dev_err(&client->dev, "no platform data\n");
return -EINVAL;
}
if (twl_priv) {
dev_dbg(&client->dev, "only one instance of %s allowed\n",
DRIVER_NAME);
return -EBUSY;
}
pdev = platform_device_alloc(DRIVER_NAME, -1);
if (!pdev) {
dev_err(&client->dev, "can't alloc pdev\n");
return -ENOMEM;
}
status = platform_device_add(pdev);
if (status) {
platform_device_put(pdev);
return status;
}
if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C) == 0) {
dev_dbg(&client->dev, "can't talk I2C?\n");
status = -EIO;
goto free;
}
twl_priv = devm_kzalloc(&client->dev, sizeof(struct twl_private),
GFP_KERNEL);
if (!twl_priv) {
status = -ENOMEM;
goto free;
}
if ((id->driver_data) & TWL6030_CLASS) {
twl_priv->twl_id = TWL6030_CLASS_ID;
twl_priv->twl_map = &twl6030_map[0];
/* The charger base address is different in twl6032 */
if ((id->driver_data) & TWL6032_SUBCLASS)
twl_priv->twl_map[TWL_MODULE_MAIN_CHARGE].base =
TWL6032_BASEADD_CHARGER;
twl_regmap_config = twl6030_regmap_config;
} else {
twl_priv->twl_id = TWL4030_CLASS_ID;
twl_priv->twl_map = &twl4030_map[0];
twl_regmap_config = twl4030_regmap_config;
}
num_slaves = twl_get_num_slaves();
treewide: devm_kzalloc() -> devm_kcalloc() The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 21:07:58 +00:00
twl_priv->twl_modules = devm_kcalloc(&client->dev,
num_slaves,
sizeof(struct twl_client),
GFP_KERNEL);
if (!twl_priv->twl_modules) {
status = -ENOMEM;
goto free;
}
for (i = 0; i < num_slaves; i++) {
struct twl_client *twl = &twl_priv->twl_modules[i];
if (i == 0) {
twl->client = client;
} else {
twl->client = i2c_new_dummy_device(client->adapter,
client->addr + i);
if (IS_ERR(twl->client)) {
dev_err(&client->dev,
"can't attach client %d\n", i);
status = PTR_ERR(twl->client);
goto fail;
}
}
twl->regmap = devm_regmap_init_i2c(twl->client,
&twl_regmap_config[i]);
if (IS_ERR(twl->regmap)) {
status = PTR_ERR(twl->regmap);
dev_err(&client->dev,
"Failed to allocate regmap %d, err: %d\n", i,
status);
goto fail;
}
}
twl_priv->ready = true;
/* setup clock framework */
clocks_init(&client->dev);
/* read TWL IDCODE Register */
if (twl_class_is_4030()) {
status = twl_read_idcode_register();
WARN(status < 0, "Error: reading twl_idcode register value\n");
}
/* Maybe init the T2 Interrupt subsystem */
if (client->irq) {
if (twl_class_is_4030()) {
twl4030_init_chip_irq(id->name);
irq_base = twl4030_init_irq(&client->dev, client->irq);
} else {
irq_base = twl6030_init_irq(&client->dev, client->irq);
}
if (irq_base < 0) {
status = irq_base;
goto fail;
}
}
/*
* Disable TWL4030/TWL5030 I2C Pull-up on I2C1 and I2C4(SR) interface.
* Program I2C_SCL_CTRL_PU(bit 0)=0, I2C_SDA_CTRL_PU (bit 2)=0,
* SR_I2C_SCL_CTRL_PU(bit 4)=0 and SR_I2C_SDA_CTRL_PU(bit 6)=0.
*
* Also, always enable SmartReflex bit as that's needed for omaps to
* do anything over I2C4 for voltage scaling even if SmartReflex
* is disabled. Without the SmartReflex bit omap sys_clkreq idle
* signal will never trigger for retention idle.
*/
if (twl_class_is_4030()) {
u8 temp;
twl_i2c_read_u8(TWL4030_MODULE_INTBR, &temp, REG_GPPUPDCTR1);
temp &= ~(SR_I2C_SDA_CTRL_PU | SR_I2C_SCL_CTRL_PU | \
I2C_SDA_CTRL_PU | I2C_SCL_CTRL_PU);
twl_i2c_write_u8(TWL4030_MODULE_INTBR, temp, REG_GPPUPDCTR1);
twl_i2c_read_u8(TWL_MODULE_PM_RECEIVER, &temp,
TWL4030_DCDC_GLOBAL_CFG);
temp |= SMARTREFLEX_ENABLE;
twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, temp,
TWL4030_DCDC_GLOBAL_CFG);
}
status = of_platform_populate(node, NULL, twl_auxdata_lookup,
&client->dev);
fail:
if (status < 0)
twl_remove(client);
free:
if (status < 0)
platform_device_unregister(pdev);
return status;
}
static int __maybe_unused twl_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
if (client->irq)
disable_irq(client->irq);
return 0;
}
static int __maybe_unused twl_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
if (client->irq)
enable_irq(client->irq);
return 0;
}
static SIMPLE_DEV_PM_OPS(twl_dev_pm_ops, twl_suspend, twl_resume);
static const struct i2c_device_id twl_ids[] = {
{ "twl4030", TWL4030_VAUX2 }, /* "Triton 2" */
{ "twl5030", 0 }, /* T2 updated */
{ "twl5031", TWL5031 }, /* TWL5030 updated */
{ "tps65950", 0 }, /* catalog version of twl5030 */
{ "tps65930", TPS_SUBSET }, /* fewer LDOs and DACs; no charger */
{ "tps65920", TPS_SUBSET }, /* fewer LDOs; no codec or charger */
{ "tps65921", TPS_SUBSET }, /* fewer LDOs; no codec, no LED
and vibrator. Charger in USB module*/
{ "twl6030", TWL6030_CLASS }, /* "Phoenix power chip" */
{ "twl6032", TWL6030_CLASS | TWL6032_SUBCLASS }, /* "Phoenix lite" */
{ /* end of list */ },
};
/* One Client Driver , 4 Clients */
static struct i2c_driver twl_driver = {
.driver.name = DRIVER_NAME,
.driver.pm = &twl_dev_pm_ops,
.id_table = twl_ids,
.probe_new = twl_probe,
.remove = twl_remove,
};
builtin_i2c_driver(twl_driver);