linux/drivers/pwm/pwm-mtk-disp.c

330 lines
8.4 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* MediaTek display pulse-width-modulation controller driver.
* Copyright (c) 2015 MediaTek Inc.
* Author: YH Huang <yh.huang@mediatek.com>
*/
#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pwm.h>
#include <linux/slab.h>
#define DISP_PWM_EN 0x00
#define PWM_CLKDIV_SHIFT 16
#define PWM_CLKDIV_MAX 0x3ff
#define PWM_CLKDIV_MASK (PWM_CLKDIV_MAX << PWM_CLKDIV_SHIFT)
#define PWM_PERIOD_BIT_WIDTH 12
#define PWM_PERIOD_MASK ((1 << PWM_PERIOD_BIT_WIDTH) - 1)
#define PWM_HIGH_WIDTH_SHIFT 16
#define PWM_HIGH_WIDTH_MASK (0x1fff << PWM_HIGH_WIDTH_SHIFT)
struct mtk_pwm_data {
u32 enable_mask;
unsigned int con0;
u32 con0_sel;
unsigned int con1;
bool has_commit;
unsigned int commit;
unsigned int commit_mask;
unsigned int bls_debug;
u32 bls_debug_mask;
};
struct mtk_disp_pwm {
struct pwm_chip chip;
const struct mtk_pwm_data *data;
struct clk *clk_main;
struct clk *clk_mm;
void __iomem *base;
bool enabled;
};
static inline struct mtk_disp_pwm *to_mtk_disp_pwm(struct pwm_chip *chip)
{
return container_of(chip, struct mtk_disp_pwm, chip);
}
static void mtk_disp_pwm_update_bits(struct mtk_disp_pwm *mdp, u32 offset,
u32 mask, u32 data)
{
void __iomem *address = mdp->base + offset;
u32 value;
value = readl(address);
value &= ~mask;
value |= data;
writel(value, address);
}
static int mtk_disp_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
const struct pwm_state *state)
{
struct mtk_disp_pwm *mdp = to_mtk_disp_pwm(chip);
u32 clk_div, period, high_width, value;
u64 div, rate;
int err;
if (state->polarity != PWM_POLARITY_NORMAL)
return -EINVAL;
if (!state->enabled && mdp->enabled) {
mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN,
mdp->data->enable_mask, 0x0);
clk_disable_unprepare(mdp->clk_mm);
clk_disable_unprepare(mdp->clk_main);
mdp->enabled = false;
return 0;
}
if (!mdp->enabled) {
err = clk_prepare_enable(mdp->clk_main);
if (err < 0) {
dev_err(chip->dev, "Can't enable mdp->clk_main: %pe\n",
ERR_PTR(err));
return err;
}
err = clk_prepare_enable(mdp->clk_mm);
if (err < 0) {
dev_err(chip->dev, "Can't enable mdp->clk_mm: %pe\n",
ERR_PTR(err));
clk_disable_unprepare(mdp->clk_main);
return err;
}
}
/*
* Find period, high_width and clk_div to suit duty_ns and period_ns.
* Calculate proper div value to keep period value in the bound.
*
* period_ns = 10^9 * (clk_div + 1) * (period + 1) / PWM_CLK_RATE
* duty_ns = 10^9 * (clk_div + 1) * high_width / PWM_CLK_RATE
*
* period = (PWM_CLK_RATE * period_ns) / (10^9 * (clk_div + 1)) - 1
* high_width = (PWM_CLK_RATE * duty_ns) / (10^9 * (clk_div + 1))
*/
rate = clk_get_rate(mdp->clk_main);
clk_div = mul_u64_u64_div_u64(state->period, rate, NSEC_PER_SEC) >>
PWM_PERIOD_BIT_WIDTH;
if (clk_div > PWM_CLKDIV_MAX) {
if (!mdp->enabled) {
clk_disable_unprepare(mdp->clk_mm);
clk_disable_unprepare(mdp->clk_main);
}
return -EINVAL;
}
div = NSEC_PER_SEC * (clk_div + 1);
period = mul_u64_u64_div_u64(state->period, rate, div);
if (period > 0)
period--;
high_width = mul_u64_u64_div_u64(state->duty_cycle, rate, div);
value = period | (high_width << PWM_HIGH_WIDTH_SHIFT);
if (mdp->data->bls_debug && !mdp->data->has_commit) {
/*
* For MT2701, disable double buffer before writing register
* and select manual mode and use PWM_PERIOD/PWM_HIGH_WIDTH.
*/
mtk_disp_pwm_update_bits(mdp, mdp->data->bls_debug,
mdp->data->bls_debug_mask,
mdp->data->bls_debug_mask);
mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
mdp->data->con0_sel,
mdp->data->con0_sel);
}
mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
PWM_CLKDIV_MASK,
clk_div << PWM_CLKDIV_SHIFT);
mtk_disp_pwm_update_bits(mdp, mdp->data->con1,
PWM_PERIOD_MASK | PWM_HIGH_WIDTH_MASK,
value);
if (mdp->data->has_commit) {
mtk_disp_pwm_update_bits(mdp, mdp->data->commit,
mdp->data->commit_mask,
mdp->data->commit_mask);
mtk_disp_pwm_update_bits(mdp, mdp->data->commit,
mdp->data->commit_mask,
0x0);
}
mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN, mdp->data->enable_mask,
mdp->data->enable_mask);
mdp->enabled = true;
return 0;
}
pwm: Make .get_state() callback return an error code .get_state() might fail in some cases. To make it possible that a driver signals such a failure change the prototype of .get_state() to return an error code. This patch was created using coccinelle and the following semantic patch: @p1@ identifier getstatefunc; identifier driver; @@ struct pwm_ops driver = { ..., .get_state = getstatefunc ,... }; @p2@ identifier p1.getstatefunc; identifier chip, pwm, state; @@ -void +int getstatefunc(struct pwm_chip *chip, struct pwm_device *pwm, struct pwm_state *state) { ... - return; + return 0; ... } plus the actual change of the prototype in include/linux/pwm.h (plus some manual fixing of indentions and empty lines). So for now all drivers return success unconditionally. They are adapted in the following patches to make the changes easier reviewable. Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Acked-by: Douglas Anderson <dianders@chromium.org> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20221130152148.2769768-2-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2022-12-02 18:35:26 +00:00
static int mtk_disp_pwm_get_state(struct pwm_chip *chip,
struct pwm_device *pwm,
struct pwm_state *state)
{
struct mtk_disp_pwm *mdp = to_mtk_disp_pwm(chip);
u64 rate, period, high_width;
u32 clk_div, pwm_en, con0, con1;
int err;
err = clk_prepare_enable(mdp->clk_main);
if (err < 0) {
dev_err(chip->dev, "Can't enable mdp->clk_main: %pe\n", ERR_PTR(err));
return err;
}
err = clk_prepare_enable(mdp->clk_mm);
if (err < 0) {
dev_err(chip->dev, "Can't enable mdp->clk_mm: %pe\n", ERR_PTR(err));
clk_disable_unprepare(mdp->clk_main);
return err;
}
pwm: mtk-disp: Configure double buffering before reading in .get_state() The DISP_PWM controller's default behavior is to always use register double buffering: all reads/writes are then performed on shadow registers instead of working registers and this becomes an issue in case our chosen configuration in Linux is different from the default (or from the one that was pre-applied by the bootloader). An example of broken behavior is when the controller is configured to use shadow registers, but this driver wants to configure it otherwise: what happens is that the .get_state() callback is called right after registering the pwmchip and checks whether the PWM is enabled by reading the DISP_PWM_EN register; At this point, if shadow registers are enabled but their content was not committed before booting Linux, we are *not* reading the current PWM enablement status, leading to the kernel knowing that the hardware is actually enabled when, in reality, it's not. The aforementioned issue emerged since this driver was fixed with commit 0b5ef3429d8f ("pwm: mtk-disp: Fix the parameters calculated by the enabled flag of disp_pwm") making it to read the enablement status from the right register. Configure the controller in the .get_state() callback to avoid this desync issue and get the backlight properly working again. Fixes: 3f2b16734914 ("pwm: mtk-disp: Implement atomic API .get_state()") Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com> Tested-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-04-03 13:30:54 +00:00
/*
* Apply DISP_PWM_DEBUG settings to choose whether to enable or disable
* registers double buffer and manual commit to working register before
* performing any read/write operation
*/
if (mdp->data->bls_debug)
mtk_disp_pwm_update_bits(mdp, mdp->data->bls_debug,
mdp->data->bls_debug_mask,
mdp->data->bls_debug_mask);
rate = clk_get_rate(mdp->clk_main);
con0 = readl(mdp->base + mdp->data->con0);
con1 = readl(mdp->base + mdp->data->con1);
pwm_en = readl(mdp->base + DISP_PWM_EN);
state->enabled = !!(pwm_en & mdp->data->enable_mask);
clk_div = FIELD_GET(PWM_CLKDIV_MASK, con0);
period = FIELD_GET(PWM_PERIOD_MASK, con1);
/*
* period has 12 bits, clk_div 11 and NSEC_PER_SEC has 30,
* so period * (clk_div + 1) * NSEC_PER_SEC doesn't overflow.
*/
state->period = DIV64_U64_ROUND_UP(period * (clk_div + 1) * NSEC_PER_SEC, rate);
high_width = FIELD_GET(PWM_HIGH_WIDTH_MASK, con1);
state->duty_cycle = DIV64_U64_ROUND_UP(high_width * (clk_div + 1) * NSEC_PER_SEC,
rate);
state->polarity = PWM_POLARITY_NORMAL;
clk_disable_unprepare(mdp->clk_mm);
clk_disable_unprepare(mdp->clk_main);
pwm: Make .get_state() callback return an error code .get_state() might fail in some cases. To make it possible that a driver signals such a failure change the prototype of .get_state() to return an error code. This patch was created using coccinelle and the following semantic patch: @p1@ identifier getstatefunc; identifier driver; @@ struct pwm_ops driver = { ..., .get_state = getstatefunc ,... }; @p2@ identifier p1.getstatefunc; identifier chip, pwm, state; @@ -void +int getstatefunc(struct pwm_chip *chip, struct pwm_device *pwm, struct pwm_state *state) { ... - return; + return 0; ... } plus the actual change of the prototype in include/linux/pwm.h (plus some manual fixing of indentions and empty lines). So for now all drivers return success unconditionally. They are adapted in the following patches to make the changes easier reviewable. Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Acked-by: Douglas Anderson <dianders@chromium.org> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20221130152148.2769768-2-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2022-12-02 18:35:26 +00:00
return 0;
}
static const struct pwm_ops mtk_disp_pwm_ops = {
.apply = mtk_disp_pwm_apply,
.get_state = mtk_disp_pwm_get_state,
.owner = THIS_MODULE,
};
static int mtk_disp_pwm_probe(struct platform_device *pdev)
{
struct mtk_disp_pwm *mdp;
int ret;
mdp = devm_kzalloc(&pdev->dev, sizeof(*mdp), GFP_KERNEL);
if (!mdp)
return -ENOMEM;
mdp->data = of_device_get_match_data(&pdev->dev);
mdp->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(mdp->base))
return PTR_ERR(mdp->base);
mdp->clk_main = devm_clk_get(&pdev->dev, "main");
if (IS_ERR(mdp->clk_main))
return PTR_ERR(mdp->clk_main);
mdp->clk_mm = devm_clk_get(&pdev->dev, "mm");
if (IS_ERR(mdp->clk_mm))
return PTR_ERR(mdp->clk_mm);
mdp->chip.dev = &pdev->dev;
mdp->chip.ops = &mtk_disp_pwm_ops;
mdp->chip.npwm = 1;
ret = pwmchip_add(&mdp->chip);
if (ret < 0) {
dev_err(&pdev->dev, "pwmchip_add() failed: %pe\n", ERR_PTR(ret));
return ret;
}
platform_set_drvdata(pdev, mdp);
return 0;
}
static void mtk_disp_pwm_remove(struct platform_device *pdev)
{
struct mtk_disp_pwm *mdp = platform_get_drvdata(pdev);
pwmchip_remove(&mdp->chip);
}
static const struct mtk_pwm_data mt2701_pwm_data = {
.enable_mask = BIT(16),
.con0 = 0xa8,
.con0_sel = 0x2,
.con1 = 0xac,
.has_commit = false,
.bls_debug = 0xb0,
.bls_debug_mask = 0x3,
};
static const struct mtk_pwm_data mt8173_pwm_data = {
.enable_mask = BIT(0),
.con0 = 0x10,
.con0_sel = 0x0,
.con1 = 0x14,
.has_commit = true,
.commit = 0x8,
.commit_mask = 0x1,
};
static const struct mtk_pwm_data mt8183_pwm_data = {
.enable_mask = BIT(0),
.con0 = 0x18,
.con0_sel = 0x0,
.con1 = 0x1c,
.has_commit = false,
.bls_debug = 0x80,
.bls_debug_mask = 0x3,
};
static const struct of_device_id mtk_disp_pwm_of_match[] = {
{ .compatible = "mediatek,mt2701-disp-pwm", .data = &mt2701_pwm_data},
{ .compatible = "mediatek,mt6595-disp-pwm", .data = &mt8173_pwm_data},
{ .compatible = "mediatek,mt8173-disp-pwm", .data = &mt8173_pwm_data},
{ .compatible = "mediatek,mt8183-disp-pwm", .data = &mt8183_pwm_data},
{ }
};
MODULE_DEVICE_TABLE(of, mtk_disp_pwm_of_match);
static struct platform_driver mtk_disp_pwm_driver = {
.driver = {
.name = "mediatek-disp-pwm",
.of_match_table = mtk_disp_pwm_of_match,
},
.probe = mtk_disp_pwm_probe,
.remove_new = mtk_disp_pwm_remove,
};
module_platform_driver(mtk_disp_pwm_driver);
MODULE_AUTHOR("YH Huang <yh.huang@mediatek.com>");
MODULE_DESCRIPTION("MediaTek SoC display PWM driver");
MODULE_LICENSE("GPL v2");