linux/drivers/infiniband/core/cache.c

1231 lines
30 KiB
C
Raw Normal View History

/*
* Copyright (c) 2004 Topspin Communications. All rights reserved.
* Copyright (c) 2005 Intel Corporation. All rights reserved.
* Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved.
* Copyright (c) 2005 Voltaire, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/workqueue.h>
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
#include <linux/netdevice.h>
#include <net/addrconf.h>
#include <rdma/ib_cache.h>
#include "core_priv.h"
struct ib_pkey_cache {
int table_len;
u16 table[0];
};
struct ib_update_work {
struct work_struct work;
struct ib_device *device;
u8 port_num;
};
union ib_gid zgid;
EXPORT_SYMBOL(zgid);
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
static const struct ib_gid_attr zattr;
enum gid_attr_find_mask {
GID_ATTR_FIND_MASK_GID = 1UL << 0,
GID_ATTR_FIND_MASK_NETDEV = 1UL << 1,
GID_ATTR_FIND_MASK_DEFAULT = 1UL << 2,
GID_ATTR_FIND_MASK_GID_TYPE = 1UL << 3,
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
};
enum gid_table_entry_props {
GID_TABLE_ENTRY_INVALID = 1UL << 0,
GID_TABLE_ENTRY_DEFAULT = 1UL << 1,
};
enum gid_table_write_action {
GID_TABLE_WRITE_ACTION_ADD,
GID_TABLE_WRITE_ACTION_DEL,
/* MODIFY only updates the GID table. Currently only used by
* ib_cache_update.
*/
GID_TABLE_WRITE_ACTION_MODIFY
};
struct ib_gid_table_entry {
unsigned long props;
union ib_gid gid;
struct ib_gid_attr attr;
void *context;
};
struct ib_gid_table {
int sz;
/* In RoCE, adding a GID to the table requires:
* (a) Find if this GID is already exists.
* (b) Find a free space.
* (c) Write the new GID
*
* Delete requires different set of operations:
* (a) Find the GID
* (b) Delete it.
*
* Add/delete should be carried out atomically.
* This is done by locking this mutex from multiple
* writers. We don't need this lock for IB, as the MAD
* layer replaces all entries. All data_vec entries
* are locked by this lock.
**/
struct mutex lock;
/* This lock protects the table entries from being
* read and written simultaneously.
*/
rwlock_t rwlock;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
struct ib_gid_table_entry *data_vec;
};
static void dispatch_gid_change_event(struct ib_device *ib_dev, u8 port)
{
if (rdma_cap_roce_gid_table(ib_dev, port)) {
struct ib_event event;
event.device = ib_dev;
event.element.port_num = port;
event.event = IB_EVENT_GID_CHANGE;
ib_dispatch_event(&event);
}
}
static const char * const gid_type_str[] = {
[IB_GID_TYPE_IB] = "IB/RoCE v1",
[IB_GID_TYPE_ROCE_UDP_ENCAP] = "RoCE v2",
};
const char *ib_cache_gid_type_str(enum ib_gid_type gid_type)
{
if (gid_type < ARRAY_SIZE(gid_type_str) && gid_type_str[gid_type])
return gid_type_str[gid_type];
return "Invalid GID type";
}
EXPORT_SYMBOL(ib_cache_gid_type_str);
int ib_cache_gid_parse_type_str(const char *buf)
{
unsigned int i;
size_t len;
int err = -EINVAL;
len = strlen(buf);
if (len == 0)
return -EINVAL;
if (buf[len - 1] == '\n')
len--;
for (i = 0; i < ARRAY_SIZE(gid_type_str); ++i)
if (gid_type_str[i] && !strncmp(buf, gid_type_str[i], len) &&
len == strlen(gid_type_str[i])) {
err = i;
break;
}
return err;
}
EXPORT_SYMBOL(ib_cache_gid_parse_type_str);
/* This function expects that rwlock will be write locked in all
* scenarios and that lock will be locked in sleep-able (RoCE)
* scenarios.
*/
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
static int write_gid(struct ib_device *ib_dev, u8 port,
struct ib_gid_table *table, int ix,
const union ib_gid *gid,
const struct ib_gid_attr *attr,
enum gid_table_write_action action,
bool default_gid)
__releases(&table->rwlock) __acquires(&table->rwlock)
{
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
int ret = 0;
struct net_device *old_net_dev;
enum ib_gid_type old_gid_type;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
/* in rdma_cap_roce_gid_table, this funciton should be protected by a
* sleep-able lock.
*/
if (rdma_cap_roce_gid_table(ib_dev, port)) {
table->data_vec[ix].props |= GID_TABLE_ENTRY_INVALID;
write_unlock_irq(&table->rwlock);
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
/* GID_TABLE_WRITE_ACTION_MODIFY currently isn't supported by
* RoCE providers and thus only updates the cache.
*/
if (action == GID_TABLE_WRITE_ACTION_ADD)
ret = ib_dev->add_gid(ib_dev, port, ix, gid, attr,
&table->data_vec[ix].context);
else if (action == GID_TABLE_WRITE_ACTION_DEL)
ret = ib_dev->del_gid(ib_dev, port, ix,
&table->data_vec[ix].context);
write_lock_irq(&table->rwlock);
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
}
old_net_dev = table->data_vec[ix].attr.ndev;
old_gid_type = table->data_vec[ix].attr.gid_type;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
if (old_net_dev && old_net_dev != attr->ndev)
dev_put(old_net_dev);
/* if modify_gid failed, just delete the old gid */
if (ret || action == GID_TABLE_WRITE_ACTION_DEL) {
gid = &zgid;
attr = &zattr;
table->data_vec[ix].context = NULL;
}
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
memcpy(&table->data_vec[ix].gid, gid, sizeof(*gid));
memcpy(&table->data_vec[ix].attr, attr, sizeof(*attr));
if (default_gid) {
table->data_vec[ix].props |= GID_TABLE_ENTRY_DEFAULT;
if (action == GID_TABLE_WRITE_ACTION_DEL)
table->data_vec[ix].attr.gid_type = old_gid_type;
}
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
if (table->data_vec[ix].attr.ndev &&
table->data_vec[ix].attr.ndev != old_net_dev)
dev_hold(table->data_vec[ix].attr.ndev);
table->data_vec[ix].props &= ~GID_TABLE_ENTRY_INVALID;
return ret;
}
static int add_gid(struct ib_device *ib_dev, u8 port,
struct ib_gid_table *table, int ix,
const union ib_gid *gid,
const struct ib_gid_attr *attr,
bool default_gid) {
return write_gid(ib_dev, port, table, ix, gid, attr,
GID_TABLE_WRITE_ACTION_ADD, default_gid);
}
static int modify_gid(struct ib_device *ib_dev, u8 port,
struct ib_gid_table *table, int ix,
const union ib_gid *gid,
const struct ib_gid_attr *attr,
bool default_gid) {
return write_gid(ib_dev, port, table, ix, gid, attr,
GID_TABLE_WRITE_ACTION_MODIFY, default_gid);
}
static int del_gid(struct ib_device *ib_dev, u8 port,
struct ib_gid_table *table, int ix,
bool default_gid) {
return write_gid(ib_dev, port, table, ix, &zgid, &zattr,
GID_TABLE_WRITE_ACTION_DEL, default_gid);
}
/* rwlock should be read locked */
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
static int find_gid(struct ib_gid_table *table, const union ib_gid *gid,
const struct ib_gid_attr *val, bool default_gid,
unsigned long mask, int *pempty)
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
{
int i = 0;
int found = -1;
int empty = pempty ? -1 : 0;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
while (i < table->sz && (found < 0 || empty < 0)) {
struct ib_gid_table_entry *data = &table->data_vec[i];
struct ib_gid_attr *attr = &data->attr;
int curr_index = i;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
i++;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
if (data->props & GID_TABLE_ENTRY_INVALID)
continue;
if (empty < 0)
if (!memcmp(&data->gid, &zgid, sizeof(*gid)) &&
!memcmp(attr, &zattr, sizeof(*attr)) &&
!data->props)
empty = curr_index;
if (found >= 0)
continue;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
if (mask & GID_ATTR_FIND_MASK_GID_TYPE &&
attr->gid_type != val->gid_type)
continue;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
if (mask & GID_ATTR_FIND_MASK_GID &&
memcmp(gid, &data->gid, sizeof(*gid)))
continue;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
if (mask & GID_ATTR_FIND_MASK_NETDEV &&
attr->ndev != val->ndev)
continue;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
if (mask & GID_ATTR_FIND_MASK_DEFAULT &&
!!(data->props & GID_TABLE_ENTRY_DEFAULT) !=
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
default_gid)
continue;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
found = curr_index;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
}
if (pempty)
*pempty = empty;
return found;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
}
static void make_default_gid(struct net_device *dev, union ib_gid *gid)
{
gid->global.subnet_prefix = cpu_to_be64(0xfe80000000000000LL);
addrconf_ifid_eui48(&gid->raw[8], dev);
}
int ib_cache_gid_add(struct ib_device *ib_dev, u8 port,
union ib_gid *gid, struct ib_gid_attr *attr)
{
struct ib_gid_table *table;
int ix;
int ret = 0;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
struct net_device *idev;
int empty;
table = ib_dev->cache.ports[port - rdma_start_port(ib_dev)].gid;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
if (!memcmp(gid, &zgid, sizeof(*gid)))
return -EINVAL;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
if (ib_dev->get_netdev) {
idev = ib_dev->get_netdev(ib_dev, port);
if (idev && attr->ndev != idev) {
union ib_gid default_gid;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
/* Adding default GIDs in not permitted */
make_default_gid(idev, &default_gid);
if (!memcmp(gid, &default_gid, sizeof(*gid))) {
dev_put(idev);
return -EPERM;
}
}
if (idev)
dev_put(idev);
}
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
mutex_lock(&table->lock);
write_lock_irq(&table->rwlock);
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
ix = find_gid(table, gid, attr, false, GID_ATTR_FIND_MASK_GID |
GID_ATTR_FIND_MASK_GID_TYPE |
GID_ATTR_FIND_MASK_NETDEV, &empty);
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
if (ix >= 0)
goto out_unlock;
if (empty < 0) {
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
ret = -ENOSPC;
goto out_unlock;
}
ret = add_gid(ib_dev, port, table, empty, gid, attr, false);
if (!ret)
dispatch_gid_change_event(ib_dev, port);
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
out_unlock:
write_unlock_irq(&table->rwlock);
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
mutex_unlock(&table->lock);
return ret;
}
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
int ib_cache_gid_del(struct ib_device *ib_dev, u8 port,
union ib_gid *gid, struct ib_gid_attr *attr)
{
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
struct ib_gid_table *table;
int ix;
table = ib_dev->cache.ports[port - rdma_start_port(ib_dev)].gid;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
mutex_lock(&table->lock);
write_lock_irq(&table->rwlock);
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
ix = find_gid(table, gid, attr, false,
GID_ATTR_FIND_MASK_GID |
GID_ATTR_FIND_MASK_GID_TYPE |
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
GID_ATTR_FIND_MASK_NETDEV |
GID_ATTR_FIND_MASK_DEFAULT,
NULL);
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
if (ix < 0)
goto out_unlock;
if (!del_gid(ib_dev, port, table, ix, false))
dispatch_gid_change_event(ib_dev, port);
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
out_unlock:
write_unlock_irq(&table->rwlock);
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
mutex_unlock(&table->lock);
return 0;
}
int ib_cache_gid_del_all_netdev_gids(struct ib_device *ib_dev, u8 port,
struct net_device *ndev)
{
struct ib_gid_table *table;
int ix;
bool deleted = false;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
table = ib_dev->cache.ports[port - rdma_start_port(ib_dev)].gid;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
mutex_lock(&table->lock);
write_lock_irq(&table->rwlock);
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
for (ix = 0; ix < table->sz; ix++)
if (table->data_vec[ix].attr.ndev == ndev)
if (!del_gid(ib_dev, port, table, ix,
!!(table->data_vec[ix].props &
GID_TABLE_ENTRY_DEFAULT)))
deleted = true;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
write_unlock_irq(&table->rwlock);
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
mutex_unlock(&table->lock);
if (deleted)
dispatch_gid_change_event(ib_dev, port);
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
return 0;
}
static int __ib_cache_gid_get(struct ib_device *ib_dev, u8 port, int index,
union ib_gid *gid, struct ib_gid_attr *attr)
{
struct ib_gid_table *table;
table = ib_dev->cache.ports[port - rdma_start_port(ib_dev)].gid;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
if (index < 0 || index >= table->sz)
return -EINVAL;
if (table->data_vec[index].props & GID_TABLE_ENTRY_INVALID)
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
return -EAGAIN;
memcpy(gid, &table->data_vec[index].gid, sizeof(*gid));
if (attr) {
memcpy(attr, &table->data_vec[index].attr, sizeof(*attr));
if (attr->ndev)
dev_hold(attr->ndev);
}
return 0;
}
static int _ib_cache_gid_table_find(struct ib_device *ib_dev,
const union ib_gid *gid,
const struct ib_gid_attr *val,
unsigned long mask,
u8 *port, u16 *index)
{
struct ib_gid_table *table;
u8 p;
int local_index;
unsigned long flags;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
for (p = 0; p < ib_dev->phys_port_cnt; p++) {
table = ib_dev->cache.ports[p].gid;
read_lock_irqsave(&table->rwlock, flags);
local_index = find_gid(table, gid, val, false, mask, NULL);
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
if (local_index >= 0) {
if (index)
*index = local_index;
if (port)
*port = p + rdma_start_port(ib_dev);
read_unlock_irqrestore(&table->rwlock, flags);
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
return 0;
}
read_unlock_irqrestore(&table->rwlock, flags);
}
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
return -ENOENT;
}
static int ib_cache_gid_find(struct ib_device *ib_dev,
const union ib_gid *gid,
enum ib_gid_type gid_type,
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
struct net_device *ndev, u8 *port,
u16 *index)
{
unsigned long mask = GID_ATTR_FIND_MASK_GID |
GID_ATTR_FIND_MASK_GID_TYPE;
struct ib_gid_attr gid_attr_val = {.ndev = ndev, .gid_type = gid_type};
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
if (ndev)
mask |= GID_ATTR_FIND_MASK_NETDEV;
return _ib_cache_gid_table_find(ib_dev, gid, &gid_attr_val,
mask, port, index);
}
int ib_find_cached_gid_by_port(struct ib_device *ib_dev,
const union ib_gid *gid,
enum ib_gid_type gid_type,
u8 port, struct net_device *ndev,
u16 *index)
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
{
int local_index;
struct ib_gid_table *table;
unsigned long mask = GID_ATTR_FIND_MASK_GID |
GID_ATTR_FIND_MASK_GID_TYPE;
struct ib_gid_attr val = {.ndev = ndev, .gid_type = gid_type};
unsigned long flags;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
if (!rdma_is_port_valid(ib_dev, port))
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
return -ENOENT;
table = ib_dev->cache.ports[port - rdma_start_port(ib_dev)].gid;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
if (ndev)
mask |= GID_ATTR_FIND_MASK_NETDEV;
read_lock_irqsave(&table->rwlock, flags);
local_index = find_gid(table, gid, &val, false, mask, NULL);
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
if (local_index >= 0) {
if (index)
*index = local_index;
read_unlock_irqrestore(&table->rwlock, flags);
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
return 0;
}
read_unlock_irqrestore(&table->rwlock, flags);
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
return -ENOENT;
}
EXPORT_SYMBOL(ib_find_cached_gid_by_port);
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
/**
* ib_find_gid_by_filter - Returns the GID table index where a specified
* GID value occurs
* @device: The device to query.
* @gid: The GID value to search for.
* @port_num: The port number of the device where the GID value could be
* searched.
* @filter: The filter function is executed on any matching GID in the table.
* If the filter function returns true, the corresponding index is returned,
* otherwise, we continue searching the GID table. It's guaranteed that
* while filter is executed, ndev field is valid and the structure won't
* change. filter is executed in an atomic context. filter must not be NULL.
* @index: The index into the cached GID table where the GID was found. This
* parameter may be NULL.
*
* ib_cache_gid_find_by_filter() searches for the specified GID value
* of which the filter function returns true in the port's GID table.
* This function is only supported on RoCE ports.
*
*/
static int ib_cache_gid_find_by_filter(struct ib_device *ib_dev,
const union ib_gid *gid,
u8 port,
bool (*filter)(const union ib_gid *,
const struct ib_gid_attr *,
void *),
void *context,
u16 *index)
{
struct ib_gid_table *table;
unsigned int i;
unsigned long flags;
bool found = false;
if (!rdma_is_port_valid(ib_dev, port) ||
!rdma_protocol_roce(ib_dev, port))
return -EPROTONOSUPPORT;
table = ib_dev->cache.ports[port - rdma_start_port(ib_dev)].gid;
read_lock_irqsave(&table->rwlock, flags);
for (i = 0; i < table->sz; i++) {
struct ib_gid_attr attr;
if (table->data_vec[i].props & GID_TABLE_ENTRY_INVALID)
goto next;
if (memcmp(gid, &table->data_vec[i].gid, sizeof(*gid)))
goto next;
memcpy(&attr, &table->data_vec[i].attr, sizeof(attr));
if (filter(gid, &attr, context))
found = true;
next:
if (found)
break;
}
read_unlock_irqrestore(&table->rwlock, flags);
if (!found)
return -ENOENT;
if (index)
*index = i;
return 0;
}
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
static struct ib_gid_table *alloc_gid_table(int sz)
{
struct ib_gid_table *table =
kzalloc(sizeof(struct ib_gid_table), GFP_KERNEL);
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
if (!table)
return NULL;
table->data_vec = kcalloc(sz, sizeof(*table->data_vec), GFP_KERNEL);
if (!table->data_vec)
goto err_free_table;
mutex_init(&table->lock);
table->sz = sz;
rwlock_init(&table->rwlock);
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
return table;
err_free_table:
kfree(table);
return NULL;
}
static void release_gid_table(struct ib_gid_table *table)
{
if (table) {
kfree(table->data_vec);
kfree(table);
}
}
static void cleanup_gid_table_port(struct ib_device *ib_dev, u8 port,
struct ib_gid_table *table)
{
int i;
bool deleted = false;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
if (!table)
return;
write_lock_irq(&table->rwlock);
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
for (i = 0; i < table->sz; ++i) {
if (memcmp(&table->data_vec[i].gid, &zgid,
sizeof(table->data_vec[i].gid)))
if (!del_gid(ib_dev, port, table, i,
table->data_vec[i].props &
GID_ATTR_FIND_MASK_DEFAULT))
deleted = true;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
}
write_unlock_irq(&table->rwlock);
if (deleted)
dispatch_gid_change_event(ib_dev, port);
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
}
void ib_cache_gid_set_default_gid(struct ib_device *ib_dev, u8 port,
struct net_device *ndev,
unsigned long gid_type_mask,
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
enum ib_cache_gid_default_mode mode)
{
union ib_gid gid;
struct ib_gid_attr gid_attr;
struct ib_gid_attr zattr_type = zattr;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
struct ib_gid_table *table;
unsigned int gid_type;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
table = ib_dev->cache.ports[port - rdma_start_port(ib_dev)].gid;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
make_default_gid(ndev, &gid);
memset(&gid_attr, 0, sizeof(gid_attr));
gid_attr.ndev = ndev;
for (gid_type = 0; gid_type < IB_GID_TYPE_SIZE; ++gid_type) {
int ix;
union ib_gid current_gid;
struct ib_gid_attr current_gid_attr = {};
if (1UL << gid_type & ~gid_type_mask)
continue;
gid_attr.gid_type = gid_type;
mutex_lock(&table->lock);
write_lock_irq(&table->rwlock);
ix = find_gid(table, NULL, &gid_attr, true,
GID_ATTR_FIND_MASK_GID_TYPE |
GID_ATTR_FIND_MASK_DEFAULT,
NULL);
/* Coudn't find default GID location */
if (WARN_ON(ix < 0))
goto release;
zattr_type.gid_type = gid_type;
if (!__ib_cache_gid_get(ib_dev, port, ix,
&current_gid, &current_gid_attr) &&
mode == IB_CACHE_GID_DEFAULT_MODE_SET &&
!memcmp(&gid, &current_gid, sizeof(gid)) &&
!memcmp(&gid_attr, &current_gid_attr, sizeof(gid_attr)))
goto release;
if (memcmp(&current_gid, &zgid, sizeof(current_gid)) ||
memcmp(&current_gid_attr, &zattr_type,
sizeof(current_gid_attr))) {
if (del_gid(ib_dev, port, table, ix, true)) {
pr_warn("ib_cache_gid: can't delete index %d for default gid %pI6\n",
ix, gid.raw);
goto release;
} else {
dispatch_gid_change_event(ib_dev, port);
}
}
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
if (mode == IB_CACHE_GID_DEFAULT_MODE_SET) {
if (add_gid(ib_dev, port, table, ix, &gid, &gid_attr, true))
pr_warn("ib_cache_gid: unable to add default gid %pI6\n",
gid.raw);
else
dispatch_gid_change_event(ib_dev, port);
}
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
release:
if (current_gid_attr.ndev)
dev_put(current_gid_attr.ndev);
write_unlock_irq(&table->rwlock);
mutex_unlock(&table->lock);
}
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
}
static int gid_table_reserve_default(struct ib_device *ib_dev, u8 port,
struct ib_gid_table *table)
{
unsigned int i;
unsigned long roce_gid_type_mask;
unsigned int num_default_gids;
unsigned int current_gid = 0;
roce_gid_type_mask = roce_gid_type_mask_support(ib_dev, port);
num_default_gids = hweight_long(roce_gid_type_mask);
for (i = 0; i < num_default_gids && i < table->sz; i++) {
struct ib_gid_table_entry *entry =
&table->data_vec[i];
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
entry->props |= GID_TABLE_ENTRY_DEFAULT;
current_gid = find_next_bit(&roce_gid_type_mask,
BITS_PER_LONG,
current_gid);
entry->attr.gid_type = current_gid++;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
}
return 0;
}
static int _gid_table_setup_one(struct ib_device *ib_dev)
{
u8 port;
struct ib_gid_table *table;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
int err = 0;
for (port = 0; port < ib_dev->phys_port_cnt; port++) {
u8 rdma_port = port + rdma_start_port(ib_dev);
table =
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
alloc_gid_table(
ib_dev->port_immutable[rdma_port].gid_tbl_len);
if (!table) {
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
err = -ENOMEM;
goto rollback_table_setup;
}
err = gid_table_reserve_default(ib_dev,
port + rdma_start_port(ib_dev),
table);
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
if (err)
goto rollback_table_setup;
ib_dev->cache.ports[port].gid = table;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
}
return 0;
rollback_table_setup:
for (port = 0; port < ib_dev->phys_port_cnt; port++) {
table = ib_dev->cache.ports[port].gid;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
cleanup_gid_table_port(ib_dev, port + rdma_start_port(ib_dev),
table);
release_gid_table(table);
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
}
return err;
}
static void gid_table_release_one(struct ib_device *ib_dev)
{
struct ib_gid_table *table;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
u8 port;
for (port = 0; port < ib_dev->phys_port_cnt; port++) {
table = ib_dev->cache.ports[port].gid;
release_gid_table(table);
ib_dev->cache.ports[port].gid = NULL;
}
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
}
static void gid_table_cleanup_one(struct ib_device *ib_dev)
{
struct ib_gid_table *table;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
u8 port;
for (port = 0; port < ib_dev->phys_port_cnt; port++) {
table = ib_dev->cache.ports[port].gid;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
cleanup_gid_table_port(ib_dev, port + rdma_start_port(ib_dev),
table);
}
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
}
static int gid_table_setup_one(struct ib_device *ib_dev)
{
int err;
err = _gid_table_setup_one(ib_dev);
if (err)
return err;
err = roce_rescan_device(ib_dev);
if (err) {
gid_table_cleanup_one(ib_dev);
gid_table_release_one(ib_dev);
}
return err;
}
int ib_get_cached_gid(struct ib_device *device,
u8 port_num,
int index,
union ib_gid *gid,
struct ib_gid_attr *gid_attr)
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
{
int res;
unsigned long flags;
struct ib_gid_table *table;
if (!rdma_is_port_valid(device, port_num))
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
return -EINVAL;
table = device->cache.ports[port_num - rdma_start_port(device)].gid;
read_lock_irqsave(&table->rwlock, flags);
res = __ib_cache_gid_get(device, port_num, index, gid, gid_attr);
read_unlock_irqrestore(&table->rwlock, flags);
return res;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
}
EXPORT_SYMBOL(ib_get_cached_gid);
int ib_find_cached_gid(struct ib_device *device,
const union ib_gid *gid,
enum ib_gid_type gid_type,
struct net_device *ndev,
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
u8 *port_num,
u16 *index)
{
return ib_cache_gid_find(device, gid, gid_type, ndev, port_num, index);
}
EXPORT_SYMBOL(ib_find_cached_gid);
int ib_find_gid_by_filter(struct ib_device *device,
const union ib_gid *gid,
u8 port_num,
bool (*filter)(const union ib_gid *gid,
const struct ib_gid_attr *,
void *),
void *context, u16 *index)
{
/* Only RoCE GID table supports filter function */
if (!rdma_cap_roce_gid_table(device, port_num) && filter)
return -EPROTONOSUPPORT;
return ib_cache_gid_find_by_filter(device, gid,
port_num, filter,
context, index);
}
EXPORT_SYMBOL(ib_find_gid_by_filter);
int ib_get_cached_pkey(struct ib_device *device,
u8 port_num,
int index,
u16 *pkey)
{
struct ib_pkey_cache *cache;
unsigned long flags;
int ret = 0;
if (!rdma_is_port_valid(device, port_num))
return -EINVAL;
read_lock_irqsave(&device->cache.lock, flags);
cache = device->cache.ports[port_num - rdma_start_port(device)].pkey;
if (index < 0 || index >= cache->table_len)
ret = -EINVAL;
else
*pkey = cache->table[index];
read_unlock_irqrestore(&device->cache.lock, flags);
return ret;
}
EXPORT_SYMBOL(ib_get_cached_pkey);
int ib_find_cached_pkey(struct ib_device *device,
u8 port_num,
u16 pkey,
u16 *index)
{
struct ib_pkey_cache *cache;
unsigned long flags;
int i;
int ret = -ENOENT;
int partial_ix = -1;
if (!rdma_is_port_valid(device, port_num))
return -EINVAL;
read_lock_irqsave(&device->cache.lock, flags);
cache = device->cache.ports[port_num - rdma_start_port(device)].pkey;
*index = -1;
for (i = 0; i < cache->table_len; ++i)
if ((cache->table[i] & 0x7fff) == (pkey & 0x7fff)) {
if (cache->table[i] & 0x8000) {
*index = i;
ret = 0;
break;
} else
partial_ix = i;
}
if (ret && partial_ix >= 0) {
*index = partial_ix;
ret = 0;
}
read_unlock_irqrestore(&device->cache.lock, flags);
return ret;
}
EXPORT_SYMBOL(ib_find_cached_pkey);
int ib_find_exact_cached_pkey(struct ib_device *device,
u8 port_num,
u16 pkey,
u16 *index)
{
struct ib_pkey_cache *cache;
unsigned long flags;
int i;
int ret = -ENOENT;
if (!rdma_is_port_valid(device, port_num))
return -EINVAL;
read_lock_irqsave(&device->cache.lock, flags);
cache = device->cache.ports[port_num - rdma_start_port(device)].pkey;
*index = -1;
for (i = 0; i < cache->table_len; ++i)
if (cache->table[i] == pkey) {
*index = i;
ret = 0;
break;
}
read_unlock_irqrestore(&device->cache.lock, flags);
return ret;
}
EXPORT_SYMBOL(ib_find_exact_cached_pkey);
int ib_get_cached_lmc(struct ib_device *device,
u8 port_num,
u8 *lmc)
{
unsigned long flags;
int ret = 0;
if (!rdma_is_port_valid(device, port_num))
return -EINVAL;
read_lock_irqsave(&device->cache.lock, flags);
*lmc = device->cache.ports[port_num - rdma_start_port(device)].lmc;
read_unlock_irqrestore(&device->cache.lock, flags);
return ret;
}
EXPORT_SYMBOL(ib_get_cached_lmc);
int ib_get_cached_port_state(struct ib_device *device,
u8 port_num,
enum ib_port_state *port_state)
{
unsigned long flags;
int ret = 0;
if (port_num < rdma_start_port(device) || port_num > rdma_end_port(device))
return -EINVAL;
read_lock_irqsave(&device->cache.lock, flags);
*port_state = device->cache.ports[port_num
- rdma_start_port(device)].port_state;
read_unlock_irqrestore(&device->cache.lock, flags);
return ret;
}
EXPORT_SYMBOL(ib_get_cached_port_state);
static void ib_cache_update(struct ib_device *device,
u8 port)
{
struct ib_port_attr *tprops = NULL;
struct ib_pkey_cache *pkey_cache = NULL, *old_pkey_cache;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
struct ib_gid_cache {
int table_len;
union ib_gid table[0];
} *gid_cache = NULL;
int i;
int ret;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
struct ib_gid_table *table;
bool use_roce_gid_table =
rdma_cap_roce_gid_table(device, port);
if (!rdma_is_port_valid(device, port))
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
return;
table = device->cache.ports[port - rdma_start_port(device)].gid;
tprops = kmalloc(sizeof *tprops, GFP_KERNEL);
if (!tprops)
return;
ret = ib_query_port(device, port, tprops);
if (ret) {
pr_warn("ib_query_port failed (%d) for %s\n",
ret, device->name);
goto err;
}
pkey_cache = kmalloc(sizeof *pkey_cache + tprops->pkey_tbl_len *
sizeof *pkey_cache->table, GFP_KERNEL);
if (!pkey_cache)
goto err;
pkey_cache->table_len = tprops->pkey_tbl_len;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
if (!use_roce_gid_table) {
gid_cache = kmalloc(sizeof(*gid_cache) + tprops->gid_tbl_len *
sizeof(*gid_cache->table), GFP_KERNEL);
if (!gid_cache)
goto err;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
gid_cache->table_len = tprops->gid_tbl_len;
}
for (i = 0; i < pkey_cache->table_len; ++i) {
ret = ib_query_pkey(device, port, i, pkey_cache->table + i);
if (ret) {
pr_warn("ib_query_pkey failed (%d) for %s (index %d)\n",
ret, device->name, i);
goto err;
}
}
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
if (!use_roce_gid_table) {
for (i = 0; i < gid_cache->table_len; ++i) {
ret = ib_query_gid(device, port, i,
gid_cache->table + i, NULL);
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
if (ret) {
pr_warn("ib_query_gid failed (%d) for %s (index %d)\n",
ret, device->name, i);
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
goto err;
}
}
}
write_lock_irq(&device->cache.lock);
old_pkey_cache = device->cache.ports[port -
rdma_start_port(device)].pkey;
device->cache.ports[port - rdma_start_port(device)].pkey = pkey_cache;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
if (!use_roce_gid_table) {
write_lock(&table->rwlock);
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
for (i = 0; i < gid_cache->table_len; i++) {
modify_gid(device, port, table, i, gid_cache->table + i,
&zattr, false);
}
write_unlock(&table->rwlock);
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
}
device->cache.ports[port - rdma_start_port(device)].lmc = tprops->lmc;
device->cache.ports[port - rdma_start_port(device)].port_state =
tprops->state;
write_unlock_irq(&device->cache.lock);
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
kfree(gid_cache);
kfree(old_pkey_cache);
kfree(tprops);
return;
err:
kfree(pkey_cache);
kfree(gid_cache);
kfree(tprops);
}
static void ib_cache_task(struct work_struct *_work)
{
struct ib_update_work *work =
container_of(_work, struct ib_update_work, work);
ib_cache_update(work->device, work->port_num);
kfree(work);
}
static void ib_cache_event(struct ib_event_handler *handler,
struct ib_event *event)
{
struct ib_update_work *work;
if (event->event == IB_EVENT_PORT_ERR ||
event->event == IB_EVENT_PORT_ACTIVE ||
event->event == IB_EVENT_LID_CHANGE ||
event->event == IB_EVENT_PKEY_CHANGE ||
event->event == IB_EVENT_SM_CHANGE ||
event->event == IB_EVENT_CLIENT_REREGISTER ||
event->event == IB_EVENT_GID_CHANGE) {
work = kmalloc(sizeof *work, GFP_ATOMIC);
if (work) {
INIT_WORK(&work->work, ib_cache_task);
work->device = event->device;
work->port_num = event->element.port_num;
queue_work(ib_wq, &work->work);
}
}
}
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
int ib_cache_setup_one(struct ib_device *device)
{
int p;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
int err;
rwlock_init(&device->cache.lock);
device->cache.ports =
kzalloc(sizeof(*device->cache.ports) *
(rdma_end_port(device) - rdma_start_port(device) + 1), GFP_KERNEL);
if (!device->cache.ports) {
err = -ENOMEM;
goto out;
}
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
err = gid_table_setup_one(device);
if (err)
goto out;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
for (p = 0; p <= rdma_end_port(device) - rdma_start_port(device); ++p)
ib_cache_update(device, p + rdma_start_port(device));
INIT_IB_EVENT_HANDLER(&device->cache.event_handler,
device, ib_cache_event);
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
err = ib_register_event_handler(&device->cache.event_handler);
if (err)
goto err;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
return 0;
err:
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
gid_table_cleanup_one(device);
out:
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
return err;
}
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
void ib_cache_release_one(struct ib_device *device)
{
int p;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
/*
* The release function frees all the cache elements.
* This function should be called as part of freeing
* all the device's resources when the cache could no
* longer be accessed.
*/
for (p = 0; p <= rdma_end_port(device) - rdma_start_port(device); ++p)
kfree(device->cache.ports[p].pkey);
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
gid_table_release_one(device);
kfree(device->cache.ports);
}
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
void ib_cache_cleanup_one(struct ib_device *device)
{
/* The cleanup function unregisters the event handler,
* waits for all in-progress workqueue elements and cleans
* up the GID cache. This function should be called after
* the device was removed from the devices list and all
* clients were removed, so the cache exists but is
* non-functional and shouldn't be updated anymore.
*/
ib_unregister_event_handler(&device->cache.event_handler);
flush_workqueue(ib_wq);
gid_table_cleanup_one(device);
}
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
void __init ib_cache_setup(void)
{
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
roce_gid_mgmt_init();
}
void __exit ib_cache_cleanup(void)
{
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-30 15:33:26 +00:00
roce_gid_mgmt_cleanup();
}