linux/drivers/gpu/drm/i915/i915_gem_gtt.c

1771 lines
49 KiB
C
Raw Normal View History

/*
* Copyright © 2010 Daniel Vetter
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
* IN THE SOFTWARE.
*
*/
#include <drm/drmP.h>
#include <drm/i915_drm.h>
#include "i915_drv.h"
#include "i915_trace.h"
#include "intel_drv.h"
#define GEN6_PPGTT_PD_ENTRIES 512
#define I915_PPGTT_PT_ENTRIES (PAGE_SIZE / sizeof(gen6_gtt_pte_t))
typedef uint64_t gen8_gtt_pte_t;
typedef gen8_gtt_pte_t gen8_ppgtt_pde_t;
/* PPGTT stuff */
#define GEN6_GTT_ADDR_ENCODE(addr) ((addr) | (((addr) >> 28) & 0xff0))
#define HSW_GTT_ADDR_ENCODE(addr) ((addr) | (((addr) >> 28) & 0x7f0))
#define GEN6_PDE_VALID (1 << 0)
/* gen6+ has bit 11-4 for physical addr bit 39-32 */
#define GEN6_PDE_ADDR_ENCODE(addr) GEN6_GTT_ADDR_ENCODE(addr)
#define GEN6_PTE_VALID (1 << 0)
#define GEN6_PTE_UNCACHED (1 << 1)
#define HSW_PTE_UNCACHED (0)
#define GEN6_PTE_CACHE_LLC (2 << 1)
#define GEN7_PTE_CACHE_L3_LLC (3 << 1)
#define GEN6_PTE_ADDR_ENCODE(addr) GEN6_GTT_ADDR_ENCODE(addr)
#define HSW_PTE_ADDR_ENCODE(addr) HSW_GTT_ADDR_ENCODE(addr)
/* Cacheability Control is a 4-bit value. The low three bits are stored in *
* bits 3:1 of the PTE, while the fourth bit is stored in bit 11 of the PTE.
*/
#define HSW_CACHEABILITY_CONTROL(bits) ((((bits) & 0x7) << 1) | \
(((bits) & 0x8) << (11 - 3)))
drm/i915/hsw: Change default LLC age to 3 The default LLC age was changed: commit 0d8ff15e9a15f2b393e53337a107b7a1e5919b6d Author: Ben Widawsky <benjamin.widawsky@intel.com> Date: Thu Jul 4 11:02:03 2013 -0700 drm/i915/hsw: Set correct Haswell PTE encodings. On the surface it would seem setting a default age wouldn't matter because all GEM BOs are aged similarly, so the order in which objects are evicted would not be subject to aging. The current working theory as to why this caused a regression though is that LLC is a bit special in that it is shared with the CPU. Presumably (not verified) the CPU fetches cachelines with age 3, and therefore recently cached GPU objects would be evicted before similar CPU object first when the LLC is full. It stands to reason therefore that this would negatively impact CPU bound benchmarks - but those seem to be low on the priority list. eLLC OTOH does not have this same property as LLC. It should be used entirely for the GPU, and so the age really shouldn't matter. Furthermore, we have no evidence to suggest one is better than another on eLLC. Since we've never properly supported eLLC before no, there should be no regression. If the GPU client really wants "younger" objects, they should use MOCS. v2: Drop the extra #define (Chad) v3: Actually git add v4: Pimped commit message Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67062 Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Chad Versace <chad.versace@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-05 06:47:29 +00:00
#define HSW_WB_LLC_AGE3 HSW_CACHEABILITY_CONTROL(0x2)
#define HSW_WB_LLC_AGE0 HSW_CACHEABILITY_CONTROL(0x3)
#define HSW_WB_ELLC_LLC_AGE0 HSW_CACHEABILITY_CONTROL(0xb)
#define HSW_WT_ELLC_LLC_AGE0 HSW_CACHEABILITY_CONTROL(0x6)
#define GEN8_PTES_PER_PAGE (PAGE_SIZE / sizeof(gen8_gtt_pte_t))
#define GEN8_PDES_PER_PAGE (PAGE_SIZE / sizeof(gen8_ppgtt_pde_t))
#define GEN8_LEGACY_PDPS 4
#define PPAT_UNCACHED_INDEX (_PAGE_PWT | _PAGE_PCD)
#define PPAT_CACHED_PDE_INDEX 0 /* WB LLC */
#define PPAT_CACHED_INDEX _PAGE_PAT /* WB LLCeLLC */
#define PPAT_DISPLAY_ELLC_INDEX _PAGE_PCD /* WT eLLC */
drm/i915: Create bind/unbind abstraction for VMAs To sum up what goes on here, we abstract the vma binding, similarly to the previous object binding. This helps for distinguishing legacy binding, versus modern binding. To keep the code churn as minimal as possible, I am leaving in insert_entries(). It serves as the per platform pte writing basically. bind_vma and insert_entries do share a lot of similarities, and I did have designs to combine the two, but as mentioned already... too much churn in an already massive patchset. What follows are the 3 commits which existed discretely in the original submissions. Upon rebasing on Broadwell support, it became clear that separation was not good, and only made for more error prone code. Below are the 3 commit messages with all their history. drm/i915: Add bind/unbind object functions to VMA drm/i915: Use the new vm [un]bind functions drm/i915: reduce vm->insert_entries() usage drm/i915: Add bind/unbind object functions to VMA As we plumb the code with more VM information, it has become more obvious that the easiest way to deal with bind and unbind is to simply put the function pointers in the vm, and let those choose the correct way to handle the page table updates. This change allows many places in the code to simply be vm->bind, and not have to worry about distinguishing PPGTT vs GGTT. Notice that this patch has no impact on functionality. I've decided to save the actual change until the next patch because I think it's easier to review that way. I'm happy to squash the two, or let Daniel do it on merge. v2: Make ggtt handle the quirky aliasing ppgtt Add flags to bind object to support above Don't ever call bind/unbind directly for PPGTT until we have real, full PPGTT (use NULLs to assert this) Make sure we rebind the ggtt if there already is a ggtt binding. This happens on set cache levels. Use VMA for bind/unbind (Daniel, Ben) v3: Reorganize ggtt_vma_bind to be more concise and easier to read (Ville). Change logic in unbind to only unbind ggtt when there is a global mapping, and to remove a redundant check if the aliasing ppgtt exists. v4: Make the bind function a bit smarter about the cache levels to avoid unnecessary multiple remaps. "I accept it is a wart, I think unifying the pin_vma / bind_vma could be unified later" (Chris) Removed the git notes, and put version info here. (Daniel) v5: Update the comment to not suck (Chris) v6: Move bind/unbind to the VMA. It makes more sense in the VMA structure (always has, but I was previously lazy). With this change, it will allow us to keep a distinct insert_entries. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: Use the new vm [un]bind functions Building on the last patch which created the new function pointers in the VM for bind/unbind, here we actually put those new function pointers to use. Split out as a separate patch to aid in review. I'm fine with squashing into the previous patch if people request it. v2: Updated to address the smart ggtt which can do aliasing as needed Make sure we bind to global gtt when mappable and fenceable. I thought we could get away without this initialy, but we cannot. v3: Make the global GTT binding explicitly use the ggtt VM for bind_vma(). While at it, use the new ggtt_vma helper (Chris) At this point the original mailing list thread diverges. ie. v4^: use target_obj instead of obj for gen6 relocate_entry vma->bind_vma() can be called safely during pin. So simply do that instead of the complicated conditionals. Don't restore PPGTT bound objects on resume path Bug fix in resume path for globally bound Bos Properly handle secure dispatch Rebased on vma bind/unbind conversion Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: reduce vm->insert_entries() usage FKA: drm/i915: eliminate vm->insert_entries() With bind/unbind function pointers in place, we no longer need insert_entries. We could, and want, to remove clear_range, however it's not totally easy at this point. Since it's used in a couple of place still that don't only deal in objects: setup, ppgtt init, and restore gtt mappings. v2: Don't actually remove insert_entries, just limit its usage. It will be useful when we introduce gen8. It will always be called from the vma bind/unbind. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-06 22:10:56 +00:00
static void ppgtt_bind_vma(struct i915_vma *vma,
enum i915_cache_level cache_level,
u32 flags);
static void ppgtt_unbind_vma(struct i915_vma *vma);
static int gen8_ppgtt_enable(struct i915_hw_ppgtt *ppgtt);
drm/i915: Create bind/unbind abstraction for VMAs To sum up what goes on here, we abstract the vma binding, similarly to the previous object binding. This helps for distinguishing legacy binding, versus modern binding. To keep the code churn as minimal as possible, I am leaving in insert_entries(). It serves as the per platform pte writing basically. bind_vma and insert_entries do share a lot of similarities, and I did have designs to combine the two, but as mentioned already... too much churn in an already massive patchset. What follows are the 3 commits which existed discretely in the original submissions. Upon rebasing on Broadwell support, it became clear that separation was not good, and only made for more error prone code. Below are the 3 commit messages with all their history. drm/i915: Add bind/unbind object functions to VMA drm/i915: Use the new vm [un]bind functions drm/i915: reduce vm->insert_entries() usage drm/i915: Add bind/unbind object functions to VMA As we plumb the code with more VM information, it has become more obvious that the easiest way to deal with bind and unbind is to simply put the function pointers in the vm, and let those choose the correct way to handle the page table updates. This change allows many places in the code to simply be vm->bind, and not have to worry about distinguishing PPGTT vs GGTT. Notice that this patch has no impact on functionality. I've decided to save the actual change until the next patch because I think it's easier to review that way. I'm happy to squash the two, or let Daniel do it on merge. v2: Make ggtt handle the quirky aliasing ppgtt Add flags to bind object to support above Don't ever call bind/unbind directly for PPGTT until we have real, full PPGTT (use NULLs to assert this) Make sure we rebind the ggtt if there already is a ggtt binding. This happens on set cache levels. Use VMA for bind/unbind (Daniel, Ben) v3: Reorganize ggtt_vma_bind to be more concise and easier to read (Ville). Change logic in unbind to only unbind ggtt when there is a global mapping, and to remove a redundant check if the aliasing ppgtt exists. v4: Make the bind function a bit smarter about the cache levels to avoid unnecessary multiple remaps. "I accept it is a wart, I think unifying the pin_vma / bind_vma could be unified later" (Chris) Removed the git notes, and put version info here. (Daniel) v5: Update the comment to not suck (Chris) v6: Move bind/unbind to the VMA. It makes more sense in the VMA structure (always has, but I was previously lazy). With this change, it will allow us to keep a distinct insert_entries. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: Use the new vm [un]bind functions Building on the last patch which created the new function pointers in the VM for bind/unbind, here we actually put those new function pointers to use. Split out as a separate patch to aid in review. I'm fine with squashing into the previous patch if people request it. v2: Updated to address the smart ggtt which can do aliasing as needed Make sure we bind to global gtt when mappable and fenceable. I thought we could get away without this initialy, but we cannot. v3: Make the global GTT binding explicitly use the ggtt VM for bind_vma(). While at it, use the new ggtt_vma helper (Chris) At this point the original mailing list thread diverges. ie. v4^: use target_obj instead of obj for gen6 relocate_entry vma->bind_vma() can be called safely during pin. So simply do that instead of the complicated conditionals. Don't restore PPGTT bound objects on resume path Bug fix in resume path for globally bound Bos Properly handle secure dispatch Rebased on vma bind/unbind conversion Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: reduce vm->insert_entries() usage FKA: drm/i915: eliminate vm->insert_entries() With bind/unbind function pointers in place, we no longer need insert_entries. We could, and want, to remove clear_range, however it's not totally easy at this point. Since it's used in a couple of place still that don't only deal in objects: setup, ppgtt init, and restore gtt mappings. v2: Don't actually remove insert_entries, just limit its usage. It will be useful when we introduce gen8. It will always be called from the vma bind/unbind. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-06 22:10:56 +00:00
static inline gen8_gtt_pte_t gen8_pte_encode(dma_addr_t addr,
enum i915_cache_level level,
bool valid)
{
gen8_gtt_pte_t pte = valid ? _PAGE_PRESENT | _PAGE_RW : 0;
pte |= addr;
if (level != I915_CACHE_NONE)
pte |= PPAT_CACHED_INDEX;
else
pte |= PPAT_UNCACHED_INDEX;
return pte;
}
static inline gen8_ppgtt_pde_t gen8_pde_encode(struct drm_device *dev,
dma_addr_t addr,
enum i915_cache_level level)
{
gen8_ppgtt_pde_t pde = _PAGE_PRESENT | _PAGE_RW;
pde |= addr;
if (level != I915_CACHE_NONE)
pde |= PPAT_CACHED_PDE_INDEX;
else
pde |= PPAT_UNCACHED_INDEX;
return pde;
}
static gen6_gtt_pte_t snb_pte_encode(dma_addr_t addr,
enum i915_cache_level level,
bool valid)
{
gen6_gtt_pte_t pte = valid ? GEN6_PTE_VALID : 0;
pte |= GEN6_PTE_ADDR_ENCODE(addr);
switch (level) {
case I915_CACHE_L3_LLC:
case I915_CACHE_LLC:
pte |= GEN6_PTE_CACHE_LLC;
break;
case I915_CACHE_NONE:
pte |= GEN6_PTE_UNCACHED;
break;
default:
WARN_ON(1);
}
return pte;
}
static gen6_gtt_pte_t ivb_pte_encode(dma_addr_t addr,
enum i915_cache_level level,
bool valid)
{
gen6_gtt_pte_t pte = valid ? GEN6_PTE_VALID : 0;
pte |= GEN6_PTE_ADDR_ENCODE(addr);
switch (level) {
case I915_CACHE_L3_LLC:
pte |= GEN7_PTE_CACHE_L3_LLC;
break;
case I915_CACHE_LLC:
pte |= GEN6_PTE_CACHE_LLC;
break;
case I915_CACHE_NONE:
pte |= GEN6_PTE_UNCACHED;
break;
default:
WARN_ON(1);
}
return pte;
}
#define BYT_PTE_WRITEABLE (1 << 1)
#define BYT_PTE_SNOOPED_BY_CPU_CACHES (1 << 2)
static gen6_gtt_pte_t byt_pte_encode(dma_addr_t addr,
enum i915_cache_level level,
bool valid)
{
gen6_gtt_pte_t pte = valid ? GEN6_PTE_VALID : 0;
pte |= GEN6_PTE_ADDR_ENCODE(addr);
/* Mark the page as writeable. Other platforms don't have a
* setting for read-only/writable, so this matches that behavior.
*/
pte |= BYT_PTE_WRITEABLE;
if (level != I915_CACHE_NONE)
pte |= BYT_PTE_SNOOPED_BY_CPU_CACHES;
return pte;
}
static gen6_gtt_pte_t hsw_pte_encode(dma_addr_t addr,
enum i915_cache_level level,
bool valid)
{
gen6_gtt_pte_t pte = valid ? GEN6_PTE_VALID : 0;
pte |= HSW_PTE_ADDR_ENCODE(addr);
if (level != I915_CACHE_NONE)
drm/i915/hsw: Change default LLC age to 3 The default LLC age was changed: commit 0d8ff15e9a15f2b393e53337a107b7a1e5919b6d Author: Ben Widawsky <benjamin.widawsky@intel.com> Date: Thu Jul 4 11:02:03 2013 -0700 drm/i915/hsw: Set correct Haswell PTE encodings. On the surface it would seem setting a default age wouldn't matter because all GEM BOs are aged similarly, so the order in which objects are evicted would not be subject to aging. The current working theory as to why this caused a regression though is that LLC is a bit special in that it is shared with the CPU. Presumably (not verified) the CPU fetches cachelines with age 3, and therefore recently cached GPU objects would be evicted before similar CPU object first when the LLC is full. It stands to reason therefore that this would negatively impact CPU bound benchmarks - but those seem to be low on the priority list. eLLC OTOH does not have this same property as LLC. It should be used entirely for the GPU, and so the age really shouldn't matter. Furthermore, we have no evidence to suggest one is better than another on eLLC. Since we've never properly supported eLLC before no, there should be no regression. If the GPU client really wants "younger" objects, they should use MOCS. v2: Drop the extra #define (Chad) v3: Actually git add v4: Pimped commit message Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67062 Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Chad Versace <chad.versace@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-05 06:47:29 +00:00
pte |= HSW_WB_LLC_AGE3;
return pte;
}
static gen6_gtt_pte_t iris_pte_encode(dma_addr_t addr,
enum i915_cache_level level,
bool valid)
{
gen6_gtt_pte_t pte = valid ? GEN6_PTE_VALID : 0;
pte |= HSW_PTE_ADDR_ENCODE(addr);
switch (level) {
case I915_CACHE_NONE:
break;
case I915_CACHE_WT:
pte |= HSW_WT_ELLC_LLC_AGE0;
break;
default:
pte |= HSW_WB_ELLC_LLC_AGE0;
break;
}
return pte;
}
/* Broadwell Page Directory Pointer Descriptors */
static int gen8_write_pdp(struct intel_ring_buffer *ring, unsigned entry,
uint64_t val, bool synchronous)
{
struct drm_i915_private *dev_priv = ring->dev->dev_private;
int ret;
BUG_ON(entry >= 4);
if (synchronous) {
I915_WRITE(GEN8_RING_PDP_UDW(ring, entry), val >> 32);
I915_WRITE(GEN8_RING_PDP_LDW(ring, entry), (u32)val);
return 0;
}
ret = intel_ring_begin(ring, 6);
if (ret)
return ret;
intel_ring_emit(ring, MI_LOAD_REGISTER_IMM(1));
intel_ring_emit(ring, GEN8_RING_PDP_UDW(ring, entry));
intel_ring_emit(ring, (u32)(val >> 32));
intel_ring_emit(ring, MI_LOAD_REGISTER_IMM(1));
intel_ring_emit(ring, GEN8_RING_PDP_LDW(ring, entry));
intel_ring_emit(ring, (u32)(val));
intel_ring_advance(ring);
return 0;
}
static int gen8_mm_switch(struct i915_hw_ppgtt *ppgtt,
struct intel_ring_buffer *ring,
bool synchronous)
{
int i, ret;
/* bit of a hack to find the actual last used pd */
int used_pd = ppgtt->num_pd_entries / GEN8_PDES_PER_PAGE;
for (i = used_pd - 1; i >= 0; i--) {
dma_addr_t addr = ppgtt->pd_dma_addr[i];
ret = gen8_write_pdp(ring, i, addr, synchronous);
if (ret)
return ret;
}
return 0;
}
static void gen8_ppgtt_clear_range(struct i915_address_space *vm,
unsigned first_entry,
unsigned num_entries,
bool use_scratch)
{
struct i915_hw_ppgtt *ppgtt =
container_of(vm, struct i915_hw_ppgtt, base);
gen8_gtt_pte_t *pt_vaddr, scratch_pte;
unsigned act_pt = first_entry / GEN8_PTES_PER_PAGE;
unsigned first_pte = first_entry % GEN8_PTES_PER_PAGE;
unsigned last_pte, i;
scratch_pte = gen8_pte_encode(ppgtt->base.scratch.addr,
I915_CACHE_LLC, use_scratch);
while (num_entries) {
struct page *page_table = &ppgtt->gen8_pt_pages[act_pt];
last_pte = first_pte + num_entries;
if (last_pte > GEN8_PTES_PER_PAGE)
last_pte = GEN8_PTES_PER_PAGE;
pt_vaddr = kmap_atomic(page_table);
for (i = first_pte; i < last_pte; i++)
pt_vaddr[i] = scratch_pte;
kunmap_atomic(pt_vaddr);
num_entries -= last_pte - first_pte;
first_pte = 0;
act_pt++;
}
}
static void gen8_ppgtt_insert_entries(struct i915_address_space *vm,
struct sg_table *pages,
unsigned first_entry,
enum i915_cache_level cache_level)
{
struct i915_hw_ppgtt *ppgtt =
container_of(vm, struct i915_hw_ppgtt, base);
gen8_gtt_pte_t *pt_vaddr;
unsigned act_pt = first_entry / GEN8_PTES_PER_PAGE;
unsigned act_pte = first_entry % GEN8_PTES_PER_PAGE;
struct sg_page_iter sg_iter;
pt_vaddr = kmap_atomic(&ppgtt->gen8_pt_pages[act_pt]);
for_each_sg_page(pages->sgl, &sg_iter, pages->nents, 0) {
dma_addr_t page_addr;
page_addr = sg_dma_address(sg_iter.sg) +
(sg_iter.sg_pgoffset << PAGE_SHIFT);
pt_vaddr[act_pte] = gen8_pte_encode(page_addr, cache_level,
true);
if (++act_pte == GEN8_PTES_PER_PAGE) {
kunmap_atomic(pt_vaddr);
act_pt++;
pt_vaddr = kmap_atomic(&ppgtt->gen8_pt_pages[act_pt]);
act_pte = 0;
}
}
kunmap_atomic(pt_vaddr);
}
static void gen8_ppgtt_cleanup(struct i915_address_space *vm)
{
struct i915_hw_ppgtt *ppgtt =
container_of(vm, struct i915_hw_ppgtt, base);
int i, j;
drm_mm_takedown(&vm->mm);
for (i = 0; i < ppgtt->num_pd_pages ; i++) {
if (ppgtt->pd_dma_addr[i]) {
pci_unmap_page(ppgtt->base.dev->pdev,
ppgtt->pd_dma_addr[i],
PAGE_SIZE, PCI_DMA_BIDIRECTIONAL);
for (j = 0; j < GEN8_PDES_PER_PAGE; j++) {
dma_addr_t addr = ppgtt->gen8_pt_dma_addr[i][j];
if (addr)
pci_unmap_page(ppgtt->base.dev->pdev,
addr,
PAGE_SIZE,
PCI_DMA_BIDIRECTIONAL);
}
}
kfree(ppgtt->gen8_pt_dma_addr[i]);
}
__free_pages(ppgtt->gen8_pt_pages, get_order(ppgtt->num_pt_pages << PAGE_SHIFT));
__free_pages(ppgtt->pd_pages, get_order(ppgtt->num_pd_pages << PAGE_SHIFT));
}
/**
* GEN8 legacy ppgtt programming is accomplished through 4 PDP registers with a
* net effect resembling a 2-level page table in normal x86 terms. Each PDP
* represents 1GB of memory
* 4 * 512 * 512 * 4096 = 4GB legacy 32b address space.
*
* TODO: Do something with the size parameter
**/
static int gen8_ppgtt_init(struct i915_hw_ppgtt *ppgtt, uint64_t size)
{
struct page *pt_pages;
int i, j, ret = -ENOMEM;
const int max_pdp = DIV_ROUND_UP(size, 1 << 30);
const int num_pt_pages = GEN8_PDES_PER_PAGE * max_pdp;
if (size % (1<<30))
DRM_INFO("Pages will be wasted unless GTT size (%llu) is divisible by 1GB\n", size);
/* FIXME: split allocation into smaller pieces. For now we only ever do
* this once, but with full PPGTT, the multiple contiguous allocations
* will be bad.
*/
ppgtt->pd_pages = alloc_pages(GFP_KERNEL, get_order(max_pdp << PAGE_SHIFT));
if (!ppgtt->pd_pages)
return -ENOMEM;
pt_pages = alloc_pages(GFP_KERNEL, get_order(num_pt_pages << PAGE_SHIFT));
if (!pt_pages) {
__free_pages(ppgtt->pd_pages, get_order(max_pdp << PAGE_SHIFT));
return -ENOMEM;
}
ppgtt->gen8_pt_pages = pt_pages;
ppgtt->num_pd_pages = 1 << get_order(max_pdp << PAGE_SHIFT);
ppgtt->num_pt_pages = 1 << get_order(num_pt_pages << PAGE_SHIFT);
ppgtt->num_pd_entries = max_pdp * GEN8_PDES_PER_PAGE;
ppgtt->enable = gen8_ppgtt_enable;
ppgtt->switch_mm = gen8_mm_switch;
ppgtt->base.clear_range = gen8_ppgtt_clear_range;
ppgtt->base.insert_entries = gen8_ppgtt_insert_entries;
ppgtt->base.cleanup = gen8_ppgtt_cleanup;
ppgtt->base.start = 0;
ppgtt->base.total = ppgtt->num_pt_pages * GEN8_PTES_PER_PAGE * PAGE_SIZE;
BUG_ON(ppgtt->num_pd_pages > GEN8_LEGACY_PDPS);
/*
* - Create a mapping for the page directories.
* - For each page directory:
* allocate space for page table mappings.
* map each page table
*/
for (i = 0; i < max_pdp; i++) {
dma_addr_t temp;
temp = pci_map_page(ppgtt->base.dev->pdev,
&ppgtt->pd_pages[i], 0,
PAGE_SIZE, PCI_DMA_BIDIRECTIONAL);
if (pci_dma_mapping_error(ppgtt->base.dev->pdev, temp))
goto err_out;
ppgtt->pd_dma_addr[i] = temp;
ppgtt->gen8_pt_dma_addr[i] = kmalloc(sizeof(dma_addr_t) * GEN8_PDES_PER_PAGE, GFP_KERNEL);
if (!ppgtt->gen8_pt_dma_addr[i])
goto err_out;
for (j = 0; j < GEN8_PDES_PER_PAGE; j++) {
struct page *p = &pt_pages[i * GEN8_PDES_PER_PAGE + j];
temp = pci_map_page(ppgtt->base.dev->pdev,
p, 0, PAGE_SIZE,
PCI_DMA_BIDIRECTIONAL);
if (pci_dma_mapping_error(ppgtt->base.dev->pdev, temp))
goto err_out;
ppgtt->gen8_pt_dma_addr[i][j] = temp;
}
}
/* For now, the PPGTT helper functions all require that the PDEs are
* plugged in correctly. So we do that now/here. For aliasing PPGTT, we
* will never need to touch the PDEs again */
for (i = 0; i < max_pdp; i++) {
gen8_ppgtt_pde_t *pd_vaddr;
pd_vaddr = kmap_atomic(&ppgtt->pd_pages[i]);
for (j = 0; j < GEN8_PDES_PER_PAGE; j++) {
dma_addr_t addr = ppgtt->gen8_pt_dma_addr[i][j];
pd_vaddr[j] = gen8_pde_encode(ppgtt->base.dev, addr,
I915_CACHE_LLC);
}
kunmap_atomic(pd_vaddr);
}
ppgtt->base.clear_range(&ppgtt->base, 0,
ppgtt->num_pd_entries * GEN8_PTES_PER_PAGE,
true);
DRM_DEBUG_DRIVER("Allocated %d pages for page directories (%d wasted)\n",
ppgtt->num_pd_pages, ppgtt->num_pd_pages - max_pdp);
DRM_DEBUG_DRIVER("Allocated %d pages for page tables (%lld wasted)\n",
ppgtt->num_pt_pages,
(ppgtt->num_pt_pages - num_pt_pages) +
size % (1<<30));
return 0;
err_out:
ppgtt->base.cleanup(&ppgtt->base);
return ret;
}
static void gen6_write_pdes(struct i915_hw_ppgtt *ppgtt)
{
struct drm_i915_private *dev_priv = ppgtt->base.dev->dev_private;
gen6_gtt_pte_t __iomem *pd_addr;
uint32_t pd_entry;
int i;
WARN_ON(ppgtt->pd_offset & 0x3f);
pd_addr = (gen6_gtt_pte_t __iomem*)dev_priv->gtt.gsm +
ppgtt->pd_offset / sizeof(gen6_gtt_pte_t);
for (i = 0; i < ppgtt->num_pd_entries; i++) {
dma_addr_t pt_addr;
pt_addr = ppgtt->pt_dma_addr[i];
pd_entry = GEN6_PDE_ADDR_ENCODE(pt_addr);
pd_entry |= GEN6_PDE_VALID;
writel(pd_entry, pd_addr + i);
}
readl(pd_addr);
}
static uint32_t get_pd_offset(struct i915_hw_ppgtt *ppgtt)
{
BUG_ON(ppgtt->pd_offset & 0x3f);
return (ppgtt->pd_offset / 64) << 16;
}
static int hsw_mm_switch(struct i915_hw_ppgtt *ppgtt,
struct intel_ring_buffer *ring,
bool synchronous)
{
struct drm_device *dev = ppgtt->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
int ret;
/* If we're in reset, we can assume the GPU is sufficiently idle to
* manually frob these bits. Ideally we could use the ring functions,
* except our error handling makes it quite difficult (can't use
* intel_ring_begin, ring->flush, or intel_ring_advance)
*
* FIXME: We should try not to special case reset
*/
if (synchronous ||
i915_reset_in_progress(&dev_priv->gpu_error)) {
WARN_ON(ppgtt != dev_priv->mm.aliasing_ppgtt);
I915_WRITE(RING_PP_DIR_DCLV(ring), PP_DIR_DCLV_2G);
I915_WRITE(RING_PP_DIR_BASE(ring), get_pd_offset(ppgtt));
POSTING_READ(RING_PP_DIR_BASE(ring));
return 0;
}
/* NB: TLBs must be flushed and invalidated before a switch */
ret = ring->flush(ring, I915_GEM_GPU_DOMAINS, I915_GEM_GPU_DOMAINS);
if (ret)
return ret;
ret = intel_ring_begin(ring, 6);
if (ret)
return ret;
intel_ring_emit(ring, MI_LOAD_REGISTER_IMM(2));
intel_ring_emit(ring, RING_PP_DIR_DCLV(ring));
intel_ring_emit(ring, PP_DIR_DCLV_2G);
intel_ring_emit(ring, RING_PP_DIR_BASE(ring));
intel_ring_emit(ring, get_pd_offset(ppgtt));
intel_ring_emit(ring, MI_NOOP);
intel_ring_advance(ring);
return 0;
}
static int gen7_mm_switch(struct i915_hw_ppgtt *ppgtt,
struct intel_ring_buffer *ring,
bool synchronous)
{
struct drm_device *dev = ppgtt->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
int ret;
/* If we're in reset, we can assume the GPU is sufficiently idle to
* manually frob these bits. Ideally we could use the ring functions,
* except our error handling makes it quite difficult (can't use
* intel_ring_begin, ring->flush, or intel_ring_advance)
*
* FIXME: We should try not to special case reset
*/
if (synchronous ||
i915_reset_in_progress(&dev_priv->gpu_error)) {
WARN_ON(ppgtt != dev_priv->mm.aliasing_ppgtt);
I915_WRITE(RING_PP_DIR_DCLV(ring), PP_DIR_DCLV_2G);
I915_WRITE(RING_PP_DIR_BASE(ring), get_pd_offset(ppgtt));
POSTING_READ(RING_PP_DIR_BASE(ring));
return 0;
}
/* NB: TLBs must be flushed and invalidated before a switch */
ret = ring->flush(ring, I915_GEM_GPU_DOMAINS, I915_GEM_GPU_DOMAINS);
if (ret)
return ret;
ret = intel_ring_begin(ring, 6);
if (ret)
return ret;
intel_ring_emit(ring, MI_LOAD_REGISTER_IMM(2));
intel_ring_emit(ring, RING_PP_DIR_DCLV(ring));
intel_ring_emit(ring, PP_DIR_DCLV_2G);
intel_ring_emit(ring, RING_PP_DIR_BASE(ring));
intel_ring_emit(ring, get_pd_offset(ppgtt));
intel_ring_emit(ring, MI_NOOP);
intel_ring_advance(ring);
/* XXX: RCS is the only one to auto invalidate the TLBs? */
if (ring->id != RCS) {
ret = ring->flush(ring, I915_GEM_GPU_DOMAINS, I915_GEM_GPU_DOMAINS);
if (ret)
return ret;
}
return 0;
}
static int gen6_mm_switch(struct i915_hw_ppgtt *ppgtt,
struct intel_ring_buffer *ring,
bool synchronous)
{
struct drm_device *dev = ppgtt->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
if (!synchronous)
return 0;
I915_WRITE(RING_PP_DIR_DCLV(ring), PP_DIR_DCLV_2G);
I915_WRITE(RING_PP_DIR_BASE(ring), get_pd_offset(ppgtt));
POSTING_READ(RING_PP_DIR_DCLV(ring));
return 0;
}
static int gen8_ppgtt_enable(struct i915_hw_ppgtt *ppgtt)
{
struct drm_device *dev = ppgtt->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_ring_buffer *ring;
int j, ret;
for_each_ring(ring, dev_priv, j) {
I915_WRITE(RING_MODE_GEN7(ring),
_MASKED_BIT_ENABLE(GFX_PPGTT_ENABLE));
ret = ppgtt->switch_mm(ppgtt, ring, true);
if (ret)
goto err_out;
}
return 0;
err_out:
for_each_ring(ring, dev_priv, j)
I915_WRITE(RING_MODE_GEN7(ring),
_MASKED_BIT_DISABLE(GFX_PPGTT_ENABLE));
return ret;
}
static int gen7_ppgtt_enable(struct i915_hw_ppgtt *ppgtt)
{
struct drm_device *dev = ppgtt->base.dev;
drm_i915_private_t *dev_priv = dev->dev_private;
struct intel_ring_buffer *ring;
uint32_t ecochk, ecobits;
int i;
gen6_write_pdes(ppgtt);
ecobits = I915_READ(GAC_ECO_BITS);
I915_WRITE(GAC_ECO_BITS, ecobits | ECOBITS_PPGTT_CACHE64B);
ecochk = I915_READ(GAM_ECOCHK);
if (IS_HASWELL(dev)) {
ecochk |= ECOCHK_PPGTT_WB_HSW;
} else {
ecochk |= ECOCHK_PPGTT_LLC_IVB;
ecochk &= ~ECOCHK_PPGTT_GFDT_IVB;
}
I915_WRITE(GAM_ECOCHK, ecochk);
for_each_ring(ring, dev_priv, i) {
int ret;
/* GFX_MODE is per-ring on gen7+ */
I915_WRITE(RING_MODE_GEN7(ring),
_MASKED_BIT_ENABLE(GFX_PPGTT_ENABLE));
ret = ppgtt->switch_mm(ppgtt, ring, true);
if (ret)
return ret;
}
return 0;
}
static int gen6_ppgtt_enable(struct i915_hw_ppgtt *ppgtt)
{
struct drm_device *dev = ppgtt->base.dev;
drm_i915_private_t *dev_priv = dev->dev_private;
struct intel_ring_buffer *ring;
uint32_t ecochk, gab_ctl, ecobits;
int i;
gen6_write_pdes(ppgtt);
ecobits = I915_READ(GAC_ECO_BITS);
I915_WRITE(GAC_ECO_BITS, ecobits | ECOBITS_SNB_BIT |
ECOBITS_PPGTT_CACHE64B);
gab_ctl = I915_READ(GAB_CTL);
I915_WRITE(GAB_CTL, gab_ctl | GAB_CTL_CONT_AFTER_PAGEFAULT);
ecochk = I915_READ(GAM_ECOCHK);
I915_WRITE(GAM_ECOCHK, ecochk | ECOCHK_SNB_BIT | ECOCHK_PPGTT_CACHE64B);
I915_WRITE(GFX_MODE, _MASKED_BIT_ENABLE(GFX_PPGTT_ENABLE));
for_each_ring(ring, dev_priv, i) {
int ret = ppgtt->switch_mm(ppgtt, ring, true);
if (ret)
return ret;
}
return 0;
}
/* PPGTT support for Sandybdrige/Gen6 and later */
static void gen6_ppgtt_clear_range(struct i915_address_space *vm,
unsigned first_entry,
drm/i915: Disable GGTT PTEs on GEN6+ suspend Once the machine gets to a certain point in the suspend process, we expect the GPU to be idle. If it is not, we might corrupt memory. Empirically (with an early version of this patch) we have seen this is not the case. We cannot currently explain why the latent GPU writes occur. In the technical sense, this patch is a workaround in that we have an issue we can't explain, and the patch indirectly solves the issue. However, it's really better than a workaround because we understand why it works, and it really should be a safe thing to do in all cases. The noticeable effect other than the debug messages would be an increase in the suspend time. I have not measure how expensive it actually is. I think it would be good to spend further time to root cause why we're seeing these latent writes, but it shouldn't preclude preventing the fallout. NOTE: It should be safe (and makes some sense IMO) to also keep the VALID bit unset on resume when we clear_range(). I've opted not to do this as properly clearing those bits at some later point would be extra work. v2: Fix bugzilla link Bugzilla: http://bugs.freedesktop.org/show_bug.cgi?id=65496 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59321 Tested-by: Takashi Iwai <tiwai@suse.de> Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Tested-By: Todd Previte <tprevite@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-16 16:21:30 +00:00
unsigned num_entries,
bool use_scratch)
{
struct i915_hw_ppgtt *ppgtt =
container_of(vm, struct i915_hw_ppgtt, base);
gen6_gtt_pte_t *pt_vaddr, scratch_pte;
unsigned act_pt = first_entry / I915_PPGTT_PT_ENTRIES;
unsigned first_pte = first_entry % I915_PPGTT_PT_ENTRIES;
unsigned last_pte, i;
scratch_pte = vm->pte_encode(vm->scratch.addr, I915_CACHE_LLC, true);
while (num_entries) {
last_pte = first_pte + num_entries;
if (last_pte > I915_PPGTT_PT_ENTRIES)
last_pte = I915_PPGTT_PT_ENTRIES;
pt_vaddr = kmap_atomic(ppgtt->pt_pages[act_pt]);
for (i = first_pte; i < last_pte; i++)
pt_vaddr[i] = scratch_pte;
kunmap_atomic(pt_vaddr);
num_entries -= last_pte - first_pte;
first_pte = 0;
act_pt++;
}
}
static void gen6_ppgtt_insert_entries(struct i915_address_space *vm,
struct sg_table *pages,
unsigned first_entry,
enum i915_cache_level cache_level)
{
struct i915_hw_ppgtt *ppgtt =
container_of(vm, struct i915_hw_ppgtt, base);
gen6_gtt_pte_t *pt_vaddr;
unsigned act_pt = first_entry / I915_PPGTT_PT_ENTRIES;
unsigned act_pte = first_entry % I915_PPGTT_PT_ENTRIES;
struct sg_page_iter sg_iter;
pt_vaddr = kmap_atomic(ppgtt->pt_pages[act_pt]);
for_each_sg_page(pages->sgl, &sg_iter, pages->nents, 0) {
dma_addr_t page_addr;
page_addr = sg_page_iter_dma_address(&sg_iter);
pt_vaddr[act_pte] = vm->pte_encode(page_addr, cache_level, true);
if (++act_pte == I915_PPGTT_PT_ENTRIES) {
kunmap_atomic(pt_vaddr);
act_pt++;
pt_vaddr = kmap_atomic(ppgtt->pt_pages[act_pt]);
act_pte = 0;
}
}
kunmap_atomic(pt_vaddr);
}
static void gen6_ppgtt_cleanup(struct i915_address_space *vm)
{
struct i915_hw_ppgtt *ppgtt =
container_of(vm, struct i915_hw_ppgtt, base);
int i;
drm_mm_takedown(&ppgtt->base.mm);
drm/i915: Use drm_mm for PPGTT PDEs When PPGTT support was originally enabled, it was only designed to support 1 PPGTT. It therefore made sense to simply hide the GGTT space required to enable this from the drm_mm allocator. Since we intend to support full PPGTT, which means more than 1, and they can be created and destroyed ad hoc it will be required to use the proper allocation techniques we already have. The first step here is to make the existing single PPGTT use the allocator. The astute observer will notice that we are reserving space in the GGTT for the PDEs for the lifetime of the address space, and would be right to question whether or not this is a good idea. It does not make a difference with this current patch only the aliasing PPGTT (indeed the PDEs should still be hidden from the shrinker). For the future, we are allocating from top to bottom to avoid using the precious "gtt space" The GGTT space at that point should only be used for scanout, HW contexts, ringbuffers, HWSP, PDEs, and a couple of other small buffers (potentially) used by the kernel. Everything else should be mapped into a PPGTT. To put the consumption in more tangible terms, it takes approximately 4 sets of PDEs to equal one 19x10 framebuffer (with no fancy stride or alignment constraints). 3/4 of the total [average] GGTT can be used for PDEs, and hopefully never touch the 1/4 that the framebuffer needs. The astute, and persistent observer might ask about the page tables which are also pinned for the address space. This waste is unfortunate. We use 2MB of memory per address space. We leave wrapping the PDEs as a real GEM object as a TODO. v2: Align PDEs to 64b in GTT Allocate the node dynamically so we can use drm_mm_put_block Now tested on IGT Allocate node at the top to avoid fragmentation (Chris) v3: Use Chris' top down allocator v4: Embed drm_mm_node into ppgtt struct (Jesse) Remove hunks which didn't belong (Jesse) v5: Don't subtract guard page since we now killed the guard page prior to this patch. (Ben) v6: Rebased and removed guard page stuff. Added a chunk to the commit message Allow adding a context to mappable region v7: Undo v3, so we can make the drm patch last in the series Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v4) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> squash: drm/i915: allow PPGTT to use mappable Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-06 22:11:07 +00:00
drm_mm_remove_node(&ppgtt->node);
if (ppgtt->pt_dma_addr) {
for (i = 0; i < ppgtt->num_pd_entries; i++)
pci_unmap_page(ppgtt->base.dev->pdev,
ppgtt->pt_dma_addr[i],
4096, PCI_DMA_BIDIRECTIONAL);
}
kfree(ppgtt->pt_dma_addr);
for (i = 0; i < ppgtt->num_pd_entries; i++)
__free_page(ppgtt->pt_pages[i]);
kfree(ppgtt->pt_pages);
kfree(ppgtt);
}
static int gen6_ppgtt_init(struct i915_hw_ppgtt *ppgtt)
{
drm/i915: Use drm_mm for PPGTT PDEs When PPGTT support was originally enabled, it was only designed to support 1 PPGTT. It therefore made sense to simply hide the GGTT space required to enable this from the drm_mm allocator. Since we intend to support full PPGTT, which means more than 1, and they can be created and destroyed ad hoc it will be required to use the proper allocation techniques we already have. The first step here is to make the existing single PPGTT use the allocator. The astute observer will notice that we are reserving space in the GGTT for the PDEs for the lifetime of the address space, and would be right to question whether or not this is a good idea. It does not make a difference with this current patch only the aliasing PPGTT (indeed the PDEs should still be hidden from the shrinker). For the future, we are allocating from top to bottom to avoid using the precious "gtt space" The GGTT space at that point should only be used for scanout, HW contexts, ringbuffers, HWSP, PDEs, and a couple of other small buffers (potentially) used by the kernel. Everything else should be mapped into a PPGTT. To put the consumption in more tangible terms, it takes approximately 4 sets of PDEs to equal one 19x10 framebuffer (with no fancy stride or alignment constraints). 3/4 of the total [average] GGTT can be used for PDEs, and hopefully never touch the 1/4 that the framebuffer needs. The astute, and persistent observer might ask about the page tables which are also pinned for the address space. This waste is unfortunate. We use 2MB of memory per address space. We leave wrapping the PDEs as a real GEM object as a TODO. v2: Align PDEs to 64b in GTT Allocate the node dynamically so we can use drm_mm_put_block Now tested on IGT Allocate node at the top to avoid fragmentation (Chris) v3: Use Chris' top down allocator v4: Embed drm_mm_node into ppgtt struct (Jesse) Remove hunks which didn't belong (Jesse) v5: Don't subtract guard page since we now killed the guard page prior to this patch. (Ben) v6: Rebased and removed guard page stuff. Added a chunk to the commit message Allow adding a context to mappable region v7: Undo v3, so we can make the drm patch last in the series Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v4) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> squash: drm/i915: allow PPGTT to use mappable Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-06 22:11:07 +00:00
#define GEN6_PD_ALIGN (PAGE_SIZE * 16)
#define GEN6_PD_SIZE (GEN6_PPGTT_PD_ENTRIES * PAGE_SIZE)
struct drm_device *dev = ppgtt->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
bool retried = false;
drm/i915: Use drm_mm for PPGTT PDEs When PPGTT support was originally enabled, it was only designed to support 1 PPGTT. It therefore made sense to simply hide the GGTT space required to enable this from the drm_mm allocator. Since we intend to support full PPGTT, which means more than 1, and they can be created and destroyed ad hoc it will be required to use the proper allocation techniques we already have. The first step here is to make the existing single PPGTT use the allocator. The astute observer will notice that we are reserving space in the GGTT for the PDEs for the lifetime of the address space, and would be right to question whether or not this is a good idea. It does not make a difference with this current patch only the aliasing PPGTT (indeed the PDEs should still be hidden from the shrinker). For the future, we are allocating from top to bottom to avoid using the precious "gtt space" The GGTT space at that point should only be used for scanout, HW contexts, ringbuffers, HWSP, PDEs, and a couple of other small buffers (potentially) used by the kernel. Everything else should be mapped into a PPGTT. To put the consumption in more tangible terms, it takes approximately 4 sets of PDEs to equal one 19x10 framebuffer (with no fancy stride or alignment constraints). 3/4 of the total [average] GGTT can be used for PDEs, and hopefully never touch the 1/4 that the framebuffer needs. The astute, and persistent observer might ask about the page tables which are also pinned for the address space. This waste is unfortunate. We use 2MB of memory per address space. We leave wrapping the PDEs as a real GEM object as a TODO. v2: Align PDEs to 64b in GTT Allocate the node dynamically so we can use drm_mm_put_block Now tested on IGT Allocate node at the top to avoid fragmentation (Chris) v3: Use Chris' top down allocator v4: Embed drm_mm_node into ppgtt struct (Jesse) Remove hunks which didn't belong (Jesse) v5: Don't subtract guard page since we now killed the guard page prior to this patch. (Ben) v6: Rebased and removed guard page stuff. Added a chunk to the commit message Allow adding a context to mappable region v7: Undo v3, so we can make the drm patch last in the series Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v4) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> squash: drm/i915: allow PPGTT to use mappable Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-06 22:11:07 +00:00
int i, ret;
drm/i915: Use drm_mm for PPGTT PDEs When PPGTT support was originally enabled, it was only designed to support 1 PPGTT. It therefore made sense to simply hide the GGTT space required to enable this from the drm_mm allocator. Since we intend to support full PPGTT, which means more than 1, and they can be created and destroyed ad hoc it will be required to use the proper allocation techniques we already have. The first step here is to make the existing single PPGTT use the allocator. The astute observer will notice that we are reserving space in the GGTT for the PDEs for the lifetime of the address space, and would be right to question whether or not this is a good idea. It does not make a difference with this current patch only the aliasing PPGTT (indeed the PDEs should still be hidden from the shrinker). For the future, we are allocating from top to bottom to avoid using the precious "gtt space" The GGTT space at that point should only be used for scanout, HW contexts, ringbuffers, HWSP, PDEs, and a couple of other small buffers (potentially) used by the kernel. Everything else should be mapped into a PPGTT. To put the consumption in more tangible terms, it takes approximately 4 sets of PDEs to equal one 19x10 framebuffer (with no fancy stride or alignment constraints). 3/4 of the total [average] GGTT can be used for PDEs, and hopefully never touch the 1/4 that the framebuffer needs. The astute, and persistent observer might ask about the page tables which are also pinned for the address space. This waste is unfortunate. We use 2MB of memory per address space. We leave wrapping the PDEs as a real GEM object as a TODO. v2: Align PDEs to 64b in GTT Allocate the node dynamically so we can use drm_mm_put_block Now tested on IGT Allocate node at the top to avoid fragmentation (Chris) v3: Use Chris' top down allocator v4: Embed drm_mm_node into ppgtt struct (Jesse) Remove hunks which didn't belong (Jesse) v5: Don't subtract guard page since we now killed the guard page prior to this patch. (Ben) v6: Rebased and removed guard page stuff. Added a chunk to the commit message Allow adding a context to mappable region v7: Undo v3, so we can make the drm patch last in the series Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v4) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> squash: drm/i915: allow PPGTT to use mappable Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-06 22:11:07 +00:00
/* PPGTT PDEs reside in the GGTT and consists of 512 entries. The
* allocator works in address space sizes, so it's multiplied by page
* size. We allocate at the top of the GTT to avoid fragmentation.
*/
BUG_ON(!drm_mm_initialized(&dev_priv->gtt.base.mm));
alloc:
drm/i915: Use drm_mm for PPGTT PDEs When PPGTT support was originally enabled, it was only designed to support 1 PPGTT. It therefore made sense to simply hide the GGTT space required to enable this from the drm_mm allocator. Since we intend to support full PPGTT, which means more than 1, and they can be created and destroyed ad hoc it will be required to use the proper allocation techniques we already have. The first step here is to make the existing single PPGTT use the allocator. The astute observer will notice that we are reserving space in the GGTT for the PDEs for the lifetime of the address space, and would be right to question whether or not this is a good idea. It does not make a difference with this current patch only the aliasing PPGTT (indeed the PDEs should still be hidden from the shrinker). For the future, we are allocating from top to bottom to avoid using the precious "gtt space" The GGTT space at that point should only be used for scanout, HW contexts, ringbuffers, HWSP, PDEs, and a couple of other small buffers (potentially) used by the kernel. Everything else should be mapped into a PPGTT. To put the consumption in more tangible terms, it takes approximately 4 sets of PDEs to equal one 19x10 framebuffer (with no fancy stride or alignment constraints). 3/4 of the total [average] GGTT can be used for PDEs, and hopefully never touch the 1/4 that the framebuffer needs. The astute, and persistent observer might ask about the page tables which are also pinned for the address space. This waste is unfortunate. We use 2MB of memory per address space. We leave wrapping the PDEs as a real GEM object as a TODO. v2: Align PDEs to 64b in GTT Allocate the node dynamically so we can use drm_mm_put_block Now tested on IGT Allocate node at the top to avoid fragmentation (Chris) v3: Use Chris' top down allocator v4: Embed drm_mm_node into ppgtt struct (Jesse) Remove hunks which didn't belong (Jesse) v5: Don't subtract guard page since we now killed the guard page prior to this patch. (Ben) v6: Rebased and removed guard page stuff. Added a chunk to the commit message Allow adding a context to mappable region v7: Undo v3, so we can make the drm patch last in the series Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v4) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> squash: drm/i915: allow PPGTT to use mappable Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-06 22:11:07 +00:00
ret = drm_mm_insert_node_in_range_generic(&dev_priv->gtt.base.mm,
&ppgtt->node, GEN6_PD_SIZE,
GEN6_PD_ALIGN, 0,
0, dev_priv->gtt.base.total,
DRM_MM_SEARCH_DEFAULT);
if (ret == -ENOSPC && !retried) {
ret = i915_gem_evict_something(dev, &dev_priv->gtt.base,
GEN6_PD_SIZE, GEN6_PD_ALIGN,
I915_CACHE_NONE, false, true);
if (ret)
return ret;
retried = true;
goto alloc;
}
drm/i915: Use drm_mm for PPGTT PDEs When PPGTT support was originally enabled, it was only designed to support 1 PPGTT. It therefore made sense to simply hide the GGTT space required to enable this from the drm_mm allocator. Since we intend to support full PPGTT, which means more than 1, and they can be created and destroyed ad hoc it will be required to use the proper allocation techniques we already have. The first step here is to make the existing single PPGTT use the allocator. The astute observer will notice that we are reserving space in the GGTT for the PDEs for the lifetime of the address space, and would be right to question whether or not this is a good idea. It does not make a difference with this current patch only the aliasing PPGTT (indeed the PDEs should still be hidden from the shrinker). For the future, we are allocating from top to bottom to avoid using the precious "gtt space" The GGTT space at that point should only be used for scanout, HW contexts, ringbuffers, HWSP, PDEs, and a couple of other small buffers (potentially) used by the kernel. Everything else should be mapped into a PPGTT. To put the consumption in more tangible terms, it takes approximately 4 sets of PDEs to equal one 19x10 framebuffer (with no fancy stride or alignment constraints). 3/4 of the total [average] GGTT can be used for PDEs, and hopefully never touch the 1/4 that the framebuffer needs. The astute, and persistent observer might ask about the page tables which are also pinned for the address space. This waste is unfortunate. We use 2MB of memory per address space. We leave wrapping the PDEs as a real GEM object as a TODO. v2: Align PDEs to 64b in GTT Allocate the node dynamically so we can use drm_mm_put_block Now tested on IGT Allocate node at the top to avoid fragmentation (Chris) v3: Use Chris' top down allocator v4: Embed drm_mm_node into ppgtt struct (Jesse) Remove hunks which didn't belong (Jesse) v5: Don't subtract guard page since we now killed the guard page prior to this patch. (Ben) v6: Rebased and removed guard page stuff. Added a chunk to the commit message Allow adding a context to mappable region v7: Undo v3, so we can make the drm patch last in the series Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v4) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> squash: drm/i915: allow PPGTT to use mappable Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-06 22:11:07 +00:00
if (ppgtt->node.start < dev_priv->gtt.mappable_end)
DRM_DEBUG("Forced to use aperture for PDEs\n");
ppgtt->base.pte_encode = dev_priv->gtt.base.pte_encode;
ppgtt->num_pd_entries = GEN6_PPGTT_PD_ENTRIES;
if (IS_GEN6(dev)) {
ppgtt->enable = gen6_ppgtt_enable;
ppgtt->switch_mm = gen6_mm_switch;
} else if (IS_HASWELL(dev)) {
ppgtt->enable = gen7_ppgtt_enable;
ppgtt->switch_mm = hsw_mm_switch;
} else if (IS_GEN7(dev)) {
ppgtt->enable = gen7_ppgtt_enable;
ppgtt->switch_mm = gen7_mm_switch;
} else
BUG();
ppgtt->base.clear_range = gen6_ppgtt_clear_range;
ppgtt->base.insert_entries = gen6_ppgtt_insert_entries;
ppgtt->base.cleanup = gen6_ppgtt_cleanup;
ppgtt->base.scratch = dev_priv->gtt.base.scratch;
ppgtt->base.start = 0;
ppgtt->base.total = GEN6_PPGTT_PD_ENTRIES * I915_PPGTT_PT_ENTRIES * PAGE_SIZE;
ppgtt->pt_pages = kcalloc(ppgtt->num_pd_entries, sizeof(struct page *),
GFP_KERNEL);
drm/i915: Use drm_mm for PPGTT PDEs When PPGTT support was originally enabled, it was only designed to support 1 PPGTT. It therefore made sense to simply hide the GGTT space required to enable this from the drm_mm allocator. Since we intend to support full PPGTT, which means more than 1, and they can be created and destroyed ad hoc it will be required to use the proper allocation techniques we already have. The first step here is to make the existing single PPGTT use the allocator. The astute observer will notice that we are reserving space in the GGTT for the PDEs for the lifetime of the address space, and would be right to question whether or not this is a good idea. It does not make a difference with this current patch only the aliasing PPGTT (indeed the PDEs should still be hidden from the shrinker). For the future, we are allocating from top to bottom to avoid using the precious "gtt space" The GGTT space at that point should only be used for scanout, HW contexts, ringbuffers, HWSP, PDEs, and a couple of other small buffers (potentially) used by the kernel. Everything else should be mapped into a PPGTT. To put the consumption in more tangible terms, it takes approximately 4 sets of PDEs to equal one 19x10 framebuffer (with no fancy stride or alignment constraints). 3/4 of the total [average] GGTT can be used for PDEs, and hopefully never touch the 1/4 that the framebuffer needs. The astute, and persistent observer might ask about the page tables which are also pinned for the address space. This waste is unfortunate. We use 2MB of memory per address space. We leave wrapping the PDEs as a real GEM object as a TODO. v2: Align PDEs to 64b in GTT Allocate the node dynamically so we can use drm_mm_put_block Now tested on IGT Allocate node at the top to avoid fragmentation (Chris) v3: Use Chris' top down allocator v4: Embed drm_mm_node into ppgtt struct (Jesse) Remove hunks which didn't belong (Jesse) v5: Don't subtract guard page since we now killed the guard page prior to this patch. (Ben) v6: Rebased and removed guard page stuff. Added a chunk to the commit message Allow adding a context to mappable region v7: Undo v3, so we can make the drm patch last in the series Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v4) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> squash: drm/i915: allow PPGTT to use mappable Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-06 22:11:07 +00:00
if (!ppgtt->pt_pages) {
drm_mm_remove_node(&ppgtt->node);
return -ENOMEM;
drm/i915: Use drm_mm for PPGTT PDEs When PPGTT support was originally enabled, it was only designed to support 1 PPGTT. It therefore made sense to simply hide the GGTT space required to enable this from the drm_mm allocator. Since we intend to support full PPGTT, which means more than 1, and they can be created and destroyed ad hoc it will be required to use the proper allocation techniques we already have. The first step here is to make the existing single PPGTT use the allocator. The astute observer will notice that we are reserving space in the GGTT for the PDEs for the lifetime of the address space, and would be right to question whether or not this is a good idea. It does not make a difference with this current patch only the aliasing PPGTT (indeed the PDEs should still be hidden from the shrinker). For the future, we are allocating from top to bottom to avoid using the precious "gtt space" The GGTT space at that point should only be used for scanout, HW contexts, ringbuffers, HWSP, PDEs, and a couple of other small buffers (potentially) used by the kernel. Everything else should be mapped into a PPGTT. To put the consumption in more tangible terms, it takes approximately 4 sets of PDEs to equal one 19x10 framebuffer (with no fancy stride or alignment constraints). 3/4 of the total [average] GGTT can be used for PDEs, and hopefully never touch the 1/4 that the framebuffer needs. The astute, and persistent observer might ask about the page tables which are also pinned for the address space. This waste is unfortunate. We use 2MB of memory per address space. We leave wrapping the PDEs as a real GEM object as a TODO. v2: Align PDEs to 64b in GTT Allocate the node dynamically so we can use drm_mm_put_block Now tested on IGT Allocate node at the top to avoid fragmentation (Chris) v3: Use Chris' top down allocator v4: Embed drm_mm_node into ppgtt struct (Jesse) Remove hunks which didn't belong (Jesse) v5: Don't subtract guard page since we now killed the guard page prior to this patch. (Ben) v6: Rebased and removed guard page stuff. Added a chunk to the commit message Allow adding a context to mappable region v7: Undo v3, so we can make the drm patch last in the series Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v4) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> squash: drm/i915: allow PPGTT to use mappable Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-06 22:11:07 +00:00
}
for (i = 0; i < ppgtt->num_pd_entries; i++) {
ppgtt->pt_pages[i] = alloc_page(GFP_KERNEL);
if (!ppgtt->pt_pages[i])
goto err_pt_alloc;
}
ppgtt->pt_dma_addr = kcalloc(ppgtt->num_pd_entries, sizeof(dma_addr_t),
GFP_KERNEL);
if (!ppgtt->pt_dma_addr)
goto err_pt_alloc;
for (i = 0; i < ppgtt->num_pd_entries; i++) {
dma_addr_t pt_addr;
pt_addr = pci_map_page(dev->pdev, ppgtt->pt_pages[i], 0, 4096,
PCI_DMA_BIDIRECTIONAL);
if (pci_dma_mapping_error(dev->pdev, pt_addr)) {
ret = -EIO;
goto err_pd_pin;
}
ppgtt->pt_dma_addr[i] = pt_addr;
}
ppgtt->base.clear_range(&ppgtt->base, 0,
drm/i915: Disable GGTT PTEs on GEN6+ suspend Once the machine gets to a certain point in the suspend process, we expect the GPU to be idle. If it is not, we might corrupt memory. Empirically (with an early version of this patch) we have seen this is not the case. We cannot currently explain why the latent GPU writes occur. In the technical sense, this patch is a workaround in that we have an issue we can't explain, and the patch indirectly solves the issue. However, it's really better than a workaround because we understand why it works, and it really should be a safe thing to do in all cases. The noticeable effect other than the debug messages would be an increase in the suspend time. I have not measure how expensive it actually is. I think it would be good to spend further time to root cause why we're seeing these latent writes, but it shouldn't preclude preventing the fallout. NOTE: It should be safe (and makes some sense IMO) to also keep the VALID bit unset on resume when we clear_range(). I've opted not to do this as properly clearing those bits at some later point would be extra work. v2: Fix bugzilla link Bugzilla: http://bugs.freedesktop.org/show_bug.cgi?id=65496 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59321 Tested-by: Takashi Iwai <tiwai@suse.de> Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Tested-By: Todd Previte <tprevite@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-16 16:21:30 +00:00
ppgtt->num_pd_entries * I915_PPGTT_PT_ENTRIES, true);
drm/i915: Use drm_mm for PPGTT PDEs When PPGTT support was originally enabled, it was only designed to support 1 PPGTT. It therefore made sense to simply hide the GGTT space required to enable this from the drm_mm allocator. Since we intend to support full PPGTT, which means more than 1, and they can be created and destroyed ad hoc it will be required to use the proper allocation techniques we already have. The first step here is to make the existing single PPGTT use the allocator. The astute observer will notice that we are reserving space in the GGTT for the PDEs for the lifetime of the address space, and would be right to question whether or not this is a good idea. It does not make a difference with this current patch only the aliasing PPGTT (indeed the PDEs should still be hidden from the shrinker). For the future, we are allocating from top to bottom to avoid using the precious "gtt space" The GGTT space at that point should only be used for scanout, HW contexts, ringbuffers, HWSP, PDEs, and a couple of other small buffers (potentially) used by the kernel. Everything else should be mapped into a PPGTT. To put the consumption in more tangible terms, it takes approximately 4 sets of PDEs to equal one 19x10 framebuffer (with no fancy stride or alignment constraints). 3/4 of the total [average] GGTT can be used for PDEs, and hopefully never touch the 1/4 that the framebuffer needs. The astute, and persistent observer might ask about the page tables which are also pinned for the address space. This waste is unfortunate. We use 2MB of memory per address space. We leave wrapping the PDEs as a real GEM object as a TODO. v2: Align PDEs to 64b in GTT Allocate the node dynamically so we can use drm_mm_put_block Now tested on IGT Allocate node at the top to avoid fragmentation (Chris) v3: Use Chris' top down allocator v4: Embed drm_mm_node into ppgtt struct (Jesse) Remove hunks which didn't belong (Jesse) v5: Don't subtract guard page since we now killed the guard page prior to this patch. (Ben) v6: Rebased and removed guard page stuff. Added a chunk to the commit message Allow adding a context to mappable region v7: Undo v3, so we can make the drm patch last in the series Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v4) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> squash: drm/i915: allow PPGTT to use mappable Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-06 22:11:07 +00:00
DRM_DEBUG_DRIVER("Allocated pde space (%ldM) at GTT entry: %lx\n",
ppgtt->node.size >> 20,
ppgtt->node.start / PAGE_SIZE);
ppgtt->pd_offset =
ppgtt->node.start / PAGE_SIZE * sizeof(gen6_gtt_pte_t);
return 0;
err_pd_pin:
if (ppgtt->pt_dma_addr) {
for (i--; i >= 0; i--)
pci_unmap_page(dev->pdev, ppgtt->pt_dma_addr[i],
4096, PCI_DMA_BIDIRECTIONAL);
}
err_pt_alloc:
kfree(ppgtt->pt_dma_addr);
for (i = 0; i < ppgtt->num_pd_entries; i++) {
if (ppgtt->pt_pages[i])
__free_page(ppgtt->pt_pages[i]);
}
kfree(ppgtt->pt_pages);
drm/i915: Use drm_mm for PPGTT PDEs When PPGTT support was originally enabled, it was only designed to support 1 PPGTT. It therefore made sense to simply hide the GGTT space required to enable this from the drm_mm allocator. Since we intend to support full PPGTT, which means more than 1, and they can be created and destroyed ad hoc it will be required to use the proper allocation techniques we already have. The first step here is to make the existing single PPGTT use the allocator. The astute observer will notice that we are reserving space in the GGTT for the PDEs for the lifetime of the address space, and would be right to question whether or not this is a good idea. It does not make a difference with this current patch only the aliasing PPGTT (indeed the PDEs should still be hidden from the shrinker). For the future, we are allocating from top to bottom to avoid using the precious "gtt space" The GGTT space at that point should only be used for scanout, HW contexts, ringbuffers, HWSP, PDEs, and a couple of other small buffers (potentially) used by the kernel. Everything else should be mapped into a PPGTT. To put the consumption in more tangible terms, it takes approximately 4 sets of PDEs to equal one 19x10 framebuffer (with no fancy stride or alignment constraints). 3/4 of the total [average] GGTT can be used for PDEs, and hopefully never touch the 1/4 that the framebuffer needs. The astute, and persistent observer might ask about the page tables which are also pinned for the address space. This waste is unfortunate. We use 2MB of memory per address space. We leave wrapping the PDEs as a real GEM object as a TODO. v2: Align PDEs to 64b in GTT Allocate the node dynamically so we can use drm_mm_put_block Now tested on IGT Allocate node at the top to avoid fragmentation (Chris) v3: Use Chris' top down allocator v4: Embed drm_mm_node into ppgtt struct (Jesse) Remove hunks which didn't belong (Jesse) v5: Don't subtract guard page since we now killed the guard page prior to this patch. (Ben) v6: Rebased and removed guard page stuff. Added a chunk to the commit message Allow adding a context to mappable region v7: Undo v3, so we can make the drm patch last in the series Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v4) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> squash: drm/i915: allow PPGTT to use mappable Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-06 22:11:07 +00:00
drm_mm_remove_node(&ppgtt->node);
return ret;
}
int i915_gem_init_ppgtt(struct drm_device *dev, struct i915_hw_ppgtt *ppgtt)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int ret = 0;
ppgtt->base.dev = dev;
if (INTEL_INFO(dev)->gen < 8)
ret = gen6_ppgtt_init(ppgtt);
else if (IS_GEN8(dev))
ret = gen8_ppgtt_init(ppgtt, dev_priv->gtt.base.total);
else
BUG();
if (!ret)
drm_mm_init(&ppgtt->base.mm, ppgtt->base.start,
ppgtt->base.total);
return ret;
}
void i915_gem_cleanup_aliasing_ppgtt(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct i915_hw_ppgtt *ppgtt = dev_priv->mm.aliasing_ppgtt;
if (!ppgtt)
return;
ppgtt->base.cleanup(&ppgtt->base);
dev_priv->mm.aliasing_ppgtt = NULL;
}
drm/i915: Create bind/unbind abstraction for VMAs To sum up what goes on here, we abstract the vma binding, similarly to the previous object binding. This helps for distinguishing legacy binding, versus modern binding. To keep the code churn as minimal as possible, I am leaving in insert_entries(). It serves as the per platform pte writing basically. bind_vma and insert_entries do share a lot of similarities, and I did have designs to combine the two, but as mentioned already... too much churn in an already massive patchset. What follows are the 3 commits which existed discretely in the original submissions. Upon rebasing on Broadwell support, it became clear that separation was not good, and only made for more error prone code. Below are the 3 commit messages with all their history. drm/i915: Add bind/unbind object functions to VMA drm/i915: Use the new vm [un]bind functions drm/i915: reduce vm->insert_entries() usage drm/i915: Add bind/unbind object functions to VMA As we plumb the code with more VM information, it has become more obvious that the easiest way to deal with bind and unbind is to simply put the function pointers in the vm, and let those choose the correct way to handle the page table updates. This change allows many places in the code to simply be vm->bind, and not have to worry about distinguishing PPGTT vs GGTT. Notice that this patch has no impact on functionality. I've decided to save the actual change until the next patch because I think it's easier to review that way. I'm happy to squash the two, or let Daniel do it on merge. v2: Make ggtt handle the quirky aliasing ppgtt Add flags to bind object to support above Don't ever call bind/unbind directly for PPGTT until we have real, full PPGTT (use NULLs to assert this) Make sure we rebind the ggtt if there already is a ggtt binding. This happens on set cache levels. Use VMA for bind/unbind (Daniel, Ben) v3: Reorganize ggtt_vma_bind to be more concise and easier to read (Ville). Change logic in unbind to only unbind ggtt when there is a global mapping, and to remove a redundant check if the aliasing ppgtt exists. v4: Make the bind function a bit smarter about the cache levels to avoid unnecessary multiple remaps. "I accept it is a wart, I think unifying the pin_vma / bind_vma could be unified later" (Chris) Removed the git notes, and put version info here. (Daniel) v5: Update the comment to not suck (Chris) v6: Move bind/unbind to the VMA. It makes more sense in the VMA structure (always has, but I was previously lazy). With this change, it will allow us to keep a distinct insert_entries. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: Use the new vm [un]bind functions Building on the last patch which created the new function pointers in the VM for bind/unbind, here we actually put those new function pointers to use. Split out as a separate patch to aid in review. I'm fine with squashing into the previous patch if people request it. v2: Updated to address the smart ggtt which can do aliasing as needed Make sure we bind to global gtt when mappable and fenceable. I thought we could get away without this initialy, but we cannot. v3: Make the global GTT binding explicitly use the ggtt VM for bind_vma(). While at it, use the new ggtt_vma helper (Chris) At this point the original mailing list thread diverges. ie. v4^: use target_obj instead of obj for gen6 relocate_entry vma->bind_vma() can be called safely during pin. So simply do that instead of the complicated conditionals. Don't restore PPGTT bound objects on resume path Bug fix in resume path for globally bound Bos Properly handle secure dispatch Rebased on vma bind/unbind conversion Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: reduce vm->insert_entries() usage FKA: drm/i915: eliminate vm->insert_entries() With bind/unbind function pointers in place, we no longer need insert_entries. We could, and want, to remove clear_range, however it's not totally easy at this point. Since it's used in a couple of place still that don't only deal in objects: setup, ppgtt init, and restore gtt mappings. v2: Don't actually remove insert_entries, just limit its usage. It will be useful when we introduce gen8. It will always be called from the vma bind/unbind. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-06 22:10:56 +00:00
static void __always_unused
ppgtt_bind_vma(struct i915_vma *vma,
enum i915_cache_level cache_level,
u32 flags)
{
drm/i915: Create bind/unbind abstraction for VMAs To sum up what goes on here, we abstract the vma binding, similarly to the previous object binding. This helps for distinguishing legacy binding, versus modern binding. To keep the code churn as minimal as possible, I am leaving in insert_entries(). It serves as the per platform pte writing basically. bind_vma and insert_entries do share a lot of similarities, and I did have designs to combine the two, but as mentioned already... too much churn in an already massive patchset. What follows are the 3 commits which existed discretely in the original submissions. Upon rebasing on Broadwell support, it became clear that separation was not good, and only made for more error prone code. Below are the 3 commit messages with all their history. drm/i915: Add bind/unbind object functions to VMA drm/i915: Use the new vm [un]bind functions drm/i915: reduce vm->insert_entries() usage drm/i915: Add bind/unbind object functions to VMA As we plumb the code with more VM information, it has become more obvious that the easiest way to deal with bind and unbind is to simply put the function pointers in the vm, and let those choose the correct way to handle the page table updates. This change allows many places in the code to simply be vm->bind, and not have to worry about distinguishing PPGTT vs GGTT. Notice that this patch has no impact on functionality. I've decided to save the actual change until the next patch because I think it's easier to review that way. I'm happy to squash the two, or let Daniel do it on merge. v2: Make ggtt handle the quirky aliasing ppgtt Add flags to bind object to support above Don't ever call bind/unbind directly for PPGTT until we have real, full PPGTT (use NULLs to assert this) Make sure we rebind the ggtt if there already is a ggtt binding. This happens on set cache levels. Use VMA for bind/unbind (Daniel, Ben) v3: Reorganize ggtt_vma_bind to be more concise and easier to read (Ville). Change logic in unbind to only unbind ggtt when there is a global mapping, and to remove a redundant check if the aliasing ppgtt exists. v4: Make the bind function a bit smarter about the cache levels to avoid unnecessary multiple remaps. "I accept it is a wart, I think unifying the pin_vma / bind_vma could be unified later" (Chris) Removed the git notes, and put version info here. (Daniel) v5: Update the comment to not suck (Chris) v6: Move bind/unbind to the VMA. It makes more sense in the VMA structure (always has, but I was previously lazy). With this change, it will allow us to keep a distinct insert_entries. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: Use the new vm [un]bind functions Building on the last patch which created the new function pointers in the VM for bind/unbind, here we actually put those new function pointers to use. Split out as a separate patch to aid in review. I'm fine with squashing into the previous patch if people request it. v2: Updated to address the smart ggtt which can do aliasing as needed Make sure we bind to global gtt when mappable and fenceable. I thought we could get away without this initialy, but we cannot. v3: Make the global GTT binding explicitly use the ggtt VM for bind_vma(). While at it, use the new ggtt_vma helper (Chris) At this point the original mailing list thread diverges. ie. v4^: use target_obj instead of obj for gen6 relocate_entry vma->bind_vma() can be called safely during pin. So simply do that instead of the complicated conditionals. Don't restore PPGTT bound objects on resume path Bug fix in resume path for globally bound Bos Properly handle secure dispatch Rebased on vma bind/unbind conversion Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: reduce vm->insert_entries() usage FKA: drm/i915: eliminate vm->insert_entries() With bind/unbind function pointers in place, we no longer need insert_entries. We could, and want, to remove clear_range, however it's not totally easy at this point. Since it's used in a couple of place still that don't only deal in objects: setup, ppgtt init, and restore gtt mappings. v2: Don't actually remove insert_entries, just limit its usage. It will be useful when we introduce gen8. It will always be called from the vma bind/unbind. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-06 22:10:56 +00:00
const unsigned long entry = vma->node.start >> PAGE_SHIFT;
WARN_ON(flags);
vma->vm->insert_entries(vma->vm, vma->obj->pages, entry, cache_level);
}
drm/i915: Create bind/unbind abstraction for VMAs To sum up what goes on here, we abstract the vma binding, similarly to the previous object binding. This helps for distinguishing legacy binding, versus modern binding. To keep the code churn as minimal as possible, I am leaving in insert_entries(). It serves as the per platform pte writing basically. bind_vma and insert_entries do share a lot of similarities, and I did have designs to combine the two, but as mentioned already... too much churn in an already massive patchset. What follows are the 3 commits which existed discretely in the original submissions. Upon rebasing on Broadwell support, it became clear that separation was not good, and only made for more error prone code. Below are the 3 commit messages with all their history. drm/i915: Add bind/unbind object functions to VMA drm/i915: Use the new vm [un]bind functions drm/i915: reduce vm->insert_entries() usage drm/i915: Add bind/unbind object functions to VMA As we plumb the code with more VM information, it has become more obvious that the easiest way to deal with bind and unbind is to simply put the function pointers in the vm, and let those choose the correct way to handle the page table updates. This change allows many places in the code to simply be vm->bind, and not have to worry about distinguishing PPGTT vs GGTT. Notice that this patch has no impact on functionality. I've decided to save the actual change until the next patch because I think it's easier to review that way. I'm happy to squash the two, or let Daniel do it on merge. v2: Make ggtt handle the quirky aliasing ppgtt Add flags to bind object to support above Don't ever call bind/unbind directly for PPGTT until we have real, full PPGTT (use NULLs to assert this) Make sure we rebind the ggtt if there already is a ggtt binding. This happens on set cache levels. Use VMA for bind/unbind (Daniel, Ben) v3: Reorganize ggtt_vma_bind to be more concise and easier to read (Ville). Change logic in unbind to only unbind ggtt when there is a global mapping, and to remove a redundant check if the aliasing ppgtt exists. v4: Make the bind function a bit smarter about the cache levels to avoid unnecessary multiple remaps. "I accept it is a wart, I think unifying the pin_vma / bind_vma could be unified later" (Chris) Removed the git notes, and put version info here. (Daniel) v5: Update the comment to not suck (Chris) v6: Move bind/unbind to the VMA. It makes more sense in the VMA structure (always has, but I was previously lazy). With this change, it will allow us to keep a distinct insert_entries. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: Use the new vm [un]bind functions Building on the last patch which created the new function pointers in the VM for bind/unbind, here we actually put those new function pointers to use. Split out as a separate patch to aid in review. I'm fine with squashing into the previous patch if people request it. v2: Updated to address the smart ggtt which can do aliasing as needed Make sure we bind to global gtt when mappable and fenceable. I thought we could get away without this initialy, but we cannot. v3: Make the global GTT binding explicitly use the ggtt VM for bind_vma(). While at it, use the new ggtt_vma helper (Chris) At this point the original mailing list thread diverges. ie. v4^: use target_obj instead of obj for gen6 relocate_entry vma->bind_vma() can be called safely during pin. So simply do that instead of the complicated conditionals. Don't restore PPGTT bound objects on resume path Bug fix in resume path for globally bound Bos Properly handle secure dispatch Rebased on vma bind/unbind conversion Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: reduce vm->insert_entries() usage FKA: drm/i915: eliminate vm->insert_entries() With bind/unbind function pointers in place, we no longer need insert_entries. We could, and want, to remove clear_range, however it's not totally easy at this point. Since it's used in a couple of place still that don't only deal in objects: setup, ppgtt init, and restore gtt mappings. v2: Don't actually remove insert_entries, just limit its usage. It will be useful when we introduce gen8. It will always be called from the vma bind/unbind. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-06 22:10:56 +00:00
static void __always_unused ppgtt_unbind_vma(struct i915_vma *vma)
{
drm/i915: Create bind/unbind abstraction for VMAs To sum up what goes on here, we abstract the vma binding, similarly to the previous object binding. This helps for distinguishing legacy binding, versus modern binding. To keep the code churn as minimal as possible, I am leaving in insert_entries(). It serves as the per platform pte writing basically. bind_vma and insert_entries do share a lot of similarities, and I did have designs to combine the two, but as mentioned already... too much churn in an already massive patchset. What follows are the 3 commits which existed discretely in the original submissions. Upon rebasing on Broadwell support, it became clear that separation was not good, and only made for more error prone code. Below are the 3 commit messages with all their history. drm/i915: Add bind/unbind object functions to VMA drm/i915: Use the new vm [un]bind functions drm/i915: reduce vm->insert_entries() usage drm/i915: Add bind/unbind object functions to VMA As we plumb the code with more VM information, it has become more obvious that the easiest way to deal with bind and unbind is to simply put the function pointers in the vm, and let those choose the correct way to handle the page table updates. This change allows many places in the code to simply be vm->bind, and not have to worry about distinguishing PPGTT vs GGTT. Notice that this patch has no impact on functionality. I've decided to save the actual change until the next patch because I think it's easier to review that way. I'm happy to squash the two, or let Daniel do it on merge. v2: Make ggtt handle the quirky aliasing ppgtt Add flags to bind object to support above Don't ever call bind/unbind directly for PPGTT until we have real, full PPGTT (use NULLs to assert this) Make sure we rebind the ggtt if there already is a ggtt binding. This happens on set cache levels. Use VMA for bind/unbind (Daniel, Ben) v3: Reorganize ggtt_vma_bind to be more concise and easier to read (Ville). Change logic in unbind to only unbind ggtt when there is a global mapping, and to remove a redundant check if the aliasing ppgtt exists. v4: Make the bind function a bit smarter about the cache levels to avoid unnecessary multiple remaps. "I accept it is a wart, I think unifying the pin_vma / bind_vma could be unified later" (Chris) Removed the git notes, and put version info here. (Daniel) v5: Update the comment to not suck (Chris) v6: Move bind/unbind to the VMA. It makes more sense in the VMA structure (always has, but I was previously lazy). With this change, it will allow us to keep a distinct insert_entries. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: Use the new vm [un]bind functions Building on the last patch which created the new function pointers in the VM for bind/unbind, here we actually put those new function pointers to use. Split out as a separate patch to aid in review. I'm fine with squashing into the previous patch if people request it. v2: Updated to address the smart ggtt which can do aliasing as needed Make sure we bind to global gtt when mappable and fenceable. I thought we could get away without this initialy, but we cannot. v3: Make the global GTT binding explicitly use the ggtt VM for bind_vma(). While at it, use the new ggtt_vma helper (Chris) At this point the original mailing list thread diverges. ie. v4^: use target_obj instead of obj for gen6 relocate_entry vma->bind_vma() can be called safely during pin. So simply do that instead of the complicated conditionals. Don't restore PPGTT bound objects on resume path Bug fix in resume path for globally bound Bos Properly handle secure dispatch Rebased on vma bind/unbind conversion Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: reduce vm->insert_entries() usage FKA: drm/i915: eliminate vm->insert_entries() With bind/unbind function pointers in place, we no longer need insert_entries. We could, and want, to remove clear_range, however it's not totally easy at this point. Since it's used in a couple of place still that don't only deal in objects: setup, ppgtt init, and restore gtt mappings. v2: Don't actually remove insert_entries, just limit its usage. It will be useful when we introduce gen8. It will always be called from the vma bind/unbind. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-06 22:10:56 +00:00
const unsigned long entry = vma->node.start >> PAGE_SHIFT;
vma->vm->clear_range(vma->vm,
entry,
vma->obj->base.size >> PAGE_SHIFT,
true);
}
extern int intel_iommu_gfx_mapped;
/* Certain Gen5 chipsets require require idling the GPU before
* unmapping anything from the GTT when VT-d is enabled.
*/
static inline bool needs_idle_maps(struct drm_device *dev)
{
#ifdef CONFIG_INTEL_IOMMU
/* Query intel_iommu to see if we need the workaround. Presumably that
* was loaded first.
*/
if (IS_GEN5(dev) && IS_MOBILE(dev) && intel_iommu_gfx_mapped)
return true;
#endif
return false;
}
static bool do_idling(struct drm_i915_private *dev_priv)
{
bool ret = dev_priv->mm.interruptible;
if (unlikely(dev_priv->gtt.do_idle_maps)) {
dev_priv->mm.interruptible = false;
if (i915_gpu_idle(dev_priv->dev)) {
DRM_ERROR("Couldn't idle GPU\n");
/* Wait a bit, in hopes it avoids the hang */
udelay(10);
}
}
return ret;
}
static void undo_idling(struct drm_i915_private *dev_priv, bool interruptible)
{
if (unlikely(dev_priv->gtt.do_idle_maps))
dev_priv->mm.interruptible = interruptible;
}
drm/i915: Disable GGTT PTEs on GEN6+ suspend Once the machine gets to a certain point in the suspend process, we expect the GPU to be idle. If it is not, we might corrupt memory. Empirically (with an early version of this patch) we have seen this is not the case. We cannot currently explain why the latent GPU writes occur. In the technical sense, this patch is a workaround in that we have an issue we can't explain, and the patch indirectly solves the issue. However, it's really better than a workaround because we understand why it works, and it really should be a safe thing to do in all cases. The noticeable effect other than the debug messages would be an increase in the suspend time. I have not measure how expensive it actually is. I think it would be good to spend further time to root cause why we're seeing these latent writes, but it shouldn't preclude preventing the fallout. NOTE: It should be safe (and makes some sense IMO) to also keep the VALID bit unset on resume when we clear_range(). I've opted not to do this as properly clearing those bits at some later point would be extra work. v2: Fix bugzilla link Bugzilla: http://bugs.freedesktop.org/show_bug.cgi?id=65496 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59321 Tested-by: Takashi Iwai <tiwai@suse.de> Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Tested-By: Todd Previte <tprevite@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-16 16:21:30 +00:00
void i915_check_and_clear_faults(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_ring_buffer *ring;
int i;
if (INTEL_INFO(dev)->gen < 6)
return;
for_each_ring(ring, dev_priv, i) {
u32 fault_reg;
fault_reg = I915_READ(RING_FAULT_REG(ring));
if (fault_reg & RING_FAULT_VALID) {
DRM_DEBUG_DRIVER("Unexpected fault\n"
"\tAddr: 0x%08lx\\n"
"\tAddress space: %s\n"
"\tSource ID: %d\n"
"\tType: %d\n",
fault_reg & PAGE_MASK,
fault_reg & RING_FAULT_GTTSEL_MASK ? "GGTT" : "PPGTT",
RING_FAULT_SRCID(fault_reg),
RING_FAULT_FAULT_TYPE(fault_reg));
I915_WRITE(RING_FAULT_REG(ring),
fault_reg & ~RING_FAULT_VALID);
}
}
POSTING_READ(RING_FAULT_REG(&dev_priv->ring[RCS]));
}
void i915_gem_suspend_gtt_mappings(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
/* Don't bother messing with faults pre GEN6 as we have little
* documentation supporting that it's a good idea.
*/
if (INTEL_INFO(dev)->gen < 6)
return;
i915_check_and_clear_faults(dev);
dev_priv->gtt.base.clear_range(&dev_priv->gtt.base,
dev_priv->gtt.base.start / PAGE_SIZE,
dev_priv->gtt.base.total / PAGE_SIZE,
false);
}
void i915_gem_restore_gtt_mappings(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_i915_gem_object *obj;
drm/i915: Disable GGTT PTEs on GEN6+ suspend Once the machine gets to a certain point in the suspend process, we expect the GPU to be idle. If it is not, we might corrupt memory. Empirically (with an early version of this patch) we have seen this is not the case. We cannot currently explain why the latent GPU writes occur. In the technical sense, this patch is a workaround in that we have an issue we can't explain, and the patch indirectly solves the issue. However, it's really better than a workaround because we understand why it works, and it really should be a safe thing to do in all cases. The noticeable effect other than the debug messages would be an increase in the suspend time. I have not measure how expensive it actually is. I think it would be good to spend further time to root cause why we're seeing these latent writes, but it shouldn't preclude preventing the fallout. NOTE: It should be safe (and makes some sense IMO) to also keep the VALID bit unset on resume when we clear_range(). I've opted not to do this as properly clearing those bits at some later point would be extra work. v2: Fix bugzilla link Bugzilla: http://bugs.freedesktop.org/show_bug.cgi?id=65496 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59321 Tested-by: Takashi Iwai <tiwai@suse.de> Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Tested-By: Todd Previte <tprevite@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-16 16:21:30 +00:00
i915_check_and_clear_faults(dev);
/* First fill our portion of the GTT with scratch pages */
dev_priv->gtt.base.clear_range(&dev_priv->gtt.base,
dev_priv->gtt.base.start / PAGE_SIZE,
drm/i915: Disable GGTT PTEs on GEN6+ suspend Once the machine gets to a certain point in the suspend process, we expect the GPU to be idle. If it is not, we might corrupt memory. Empirically (with an early version of this patch) we have seen this is not the case. We cannot currently explain why the latent GPU writes occur. In the technical sense, this patch is a workaround in that we have an issue we can't explain, and the patch indirectly solves the issue. However, it's really better than a workaround because we understand why it works, and it really should be a safe thing to do in all cases. The noticeable effect other than the debug messages would be an increase in the suspend time. I have not measure how expensive it actually is. I think it would be good to spend further time to root cause why we're seeing these latent writes, but it shouldn't preclude preventing the fallout. NOTE: It should be safe (and makes some sense IMO) to also keep the VALID bit unset on resume when we clear_range(). I've opted not to do this as properly clearing those bits at some later point would be extra work. v2: Fix bugzilla link Bugzilla: http://bugs.freedesktop.org/show_bug.cgi?id=65496 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59321 Tested-by: Takashi Iwai <tiwai@suse.de> Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Tested-By: Todd Previte <tprevite@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-16 16:21:30 +00:00
dev_priv->gtt.base.total / PAGE_SIZE,
true);
list_for_each_entry(obj, &dev_priv->mm.bound_list, global_list) {
drm/i915: Create bind/unbind abstraction for VMAs To sum up what goes on here, we abstract the vma binding, similarly to the previous object binding. This helps for distinguishing legacy binding, versus modern binding. To keep the code churn as minimal as possible, I am leaving in insert_entries(). It serves as the per platform pte writing basically. bind_vma and insert_entries do share a lot of similarities, and I did have designs to combine the two, but as mentioned already... too much churn in an already massive patchset. What follows are the 3 commits which existed discretely in the original submissions. Upon rebasing on Broadwell support, it became clear that separation was not good, and only made for more error prone code. Below are the 3 commit messages with all their history. drm/i915: Add bind/unbind object functions to VMA drm/i915: Use the new vm [un]bind functions drm/i915: reduce vm->insert_entries() usage drm/i915: Add bind/unbind object functions to VMA As we plumb the code with more VM information, it has become more obvious that the easiest way to deal with bind and unbind is to simply put the function pointers in the vm, and let those choose the correct way to handle the page table updates. This change allows many places in the code to simply be vm->bind, and not have to worry about distinguishing PPGTT vs GGTT. Notice that this patch has no impact on functionality. I've decided to save the actual change until the next patch because I think it's easier to review that way. I'm happy to squash the two, or let Daniel do it on merge. v2: Make ggtt handle the quirky aliasing ppgtt Add flags to bind object to support above Don't ever call bind/unbind directly for PPGTT until we have real, full PPGTT (use NULLs to assert this) Make sure we rebind the ggtt if there already is a ggtt binding. This happens on set cache levels. Use VMA for bind/unbind (Daniel, Ben) v3: Reorganize ggtt_vma_bind to be more concise and easier to read (Ville). Change logic in unbind to only unbind ggtt when there is a global mapping, and to remove a redundant check if the aliasing ppgtt exists. v4: Make the bind function a bit smarter about the cache levels to avoid unnecessary multiple remaps. "I accept it is a wart, I think unifying the pin_vma / bind_vma could be unified later" (Chris) Removed the git notes, and put version info here. (Daniel) v5: Update the comment to not suck (Chris) v6: Move bind/unbind to the VMA. It makes more sense in the VMA structure (always has, but I was previously lazy). With this change, it will allow us to keep a distinct insert_entries. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: Use the new vm [un]bind functions Building on the last patch which created the new function pointers in the VM for bind/unbind, here we actually put those new function pointers to use. Split out as a separate patch to aid in review. I'm fine with squashing into the previous patch if people request it. v2: Updated to address the smart ggtt which can do aliasing as needed Make sure we bind to global gtt when mappable and fenceable. I thought we could get away without this initialy, but we cannot. v3: Make the global GTT binding explicitly use the ggtt VM for bind_vma(). While at it, use the new ggtt_vma helper (Chris) At this point the original mailing list thread diverges. ie. v4^: use target_obj instead of obj for gen6 relocate_entry vma->bind_vma() can be called safely during pin. So simply do that instead of the complicated conditionals. Don't restore PPGTT bound objects on resume path Bug fix in resume path for globally bound Bos Properly handle secure dispatch Rebased on vma bind/unbind conversion Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: reduce vm->insert_entries() usage FKA: drm/i915: eliminate vm->insert_entries() With bind/unbind function pointers in place, we no longer need insert_entries. We could, and want, to remove clear_range, however it's not totally easy at this point. Since it's used in a couple of place still that don't only deal in objects: setup, ppgtt init, and restore gtt mappings. v2: Don't actually remove insert_entries, just limit its usage. It will be useful when we introduce gen8. It will always be called from the vma bind/unbind. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-06 22:10:56 +00:00
struct i915_vma *vma = i915_gem_obj_to_vma(obj,
&dev_priv->gtt.base);
if (!vma)
continue;
i915_gem_clflush_object(obj, obj->pin_display);
drm/i915: Create bind/unbind abstraction for VMAs To sum up what goes on here, we abstract the vma binding, similarly to the previous object binding. This helps for distinguishing legacy binding, versus modern binding. To keep the code churn as minimal as possible, I am leaving in insert_entries(). It serves as the per platform pte writing basically. bind_vma and insert_entries do share a lot of similarities, and I did have designs to combine the two, but as mentioned already... too much churn in an already massive patchset. What follows are the 3 commits which existed discretely in the original submissions. Upon rebasing on Broadwell support, it became clear that separation was not good, and only made for more error prone code. Below are the 3 commit messages with all their history. drm/i915: Add bind/unbind object functions to VMA drm/i915: Use the new vm [un]bind functions drm/i915: reduce vm->insert_entries() usage drm/i915: Add bind/unbind object functions to VMA As we plumb the code with more VM information, it has become more obvious that the easiest way to deal with bind and unbind is to simply put the function pointers in the vm, and let those choose the correct way to handle the page table updates. This change allows many places in the code to simply be vm->bind, and not have to worry about distinguishing PPGTT vs GGTT. Notice that this patch has no impact on functionality. I've decided to save the actual change until the next patch because I think it's easier to review that way. I'm happy to squash the two, or let Daniel do it on merge. v2: Make ggtt handle the quirky aliasing ppgtt Add flags to bind object to support above Don't ever call bind/unbind directly for PPGTT until we have real, full PPGTT (use NULLs to assert this) Make sure we rebind the ggtt if there already is a ggtt binding. This happens on set cache levels. Use VMA for bind/unbind (Daniel, Ben) v3: Reorganize ggtt_vma_bind to be more concise and easier to read (Ville). Change logic in unbind to only unbind ggtt when there is a global mapping, and to remove a redundant check if the aliasing ppgtt exists. v4: Make the bind function a bit smarter about the cache levels to avoid unnecessary multiple remaps. "I accept it is a wart, I think unifying the pin_vma / bind_vma could be unified later" (Chris) Removed the git notes, and put version info here. (Daniel) v5: Update the comment to not suck (Chris) v6: Move bind/unbind to the VMA. It makes more sense in the VMA structure (always has, but I was previously lazy). With this change, it will allow us to keep a distinct insert_entries. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: Use the new vm [un]bind functions Building on the last patch which created the new function pointers in the VM for bind/unbind, here we actually put those new function pointers to use. Split out as a separate patch to aid in review. I'm fine with squashing into the previous patch if people request it. v2: Updated to address the smart ggtt which can do aliasing as needed Make sure we bind to global gtt when mappable and fenceable. I thought we could get away without this initialy, but we cannot. v3: Make the global GTT binding explicitly use the ggtt VM for bind_vma(). While at it, use the new ggtt_vma helper (Chris) At this point the original mailing list thread diverges. ie. v4^: use target_obj instead of obj for gen6 relocate_entry vma->bind_vma() can be called safely during pin. So simply do that instead of the complicated conditionals. Don't restore PPGTT bound objects on resume path Bug fix in resume path for globally bound Bos Properly handle secure dispatch Rebased on vma bind/unbind conversion Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: reduce vm->insert_entries() usage FKA: drm/i915: eliminate vm->insert_entries() With bind/unbind function pointers in place, we no longer need insert_entries. We could, and want, to remove clear_range, however it's not totally easy at this point. Since it's used in a couple of place still that don't only deal in objects: setup, ppgtt init, and restore gtt mappings. v2: Don't actually remove insert_entries, just limit its usage. It will be useful when we introduce gen8. It will always be called from the vma bind/unbind. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-06 22:10:56 +00:00
/* The bind_vma code tries to be smart about tracking mappings.
* Unfortunately above, we've just wiped out the mappings
* without telling our object about it. So we need to fake it.
*/
obj->has_global_gtt_mapping = 0;
vma->bind_vma(vma, obj->cache_level, GLOBAL_BIND);
}
drm/i915: Stop using AGP layer for GEN6+ As a quick hack we make the old intel_gtt structure mutable so we can fool a bunch of the existing code which depends on elements in that data structure. We can/should try to remove this in a subsequent patch. This should preserve the old gtt init behavior which upon writing these patches seems incorrect. The next patch will fix these things. The one exception is VLV which doesn't have the preserved flush control write behavior. Since we want to do that for all GEN6+ stuff, we'll handle that in a later patch. Mainstream VLV support doesn't actually exist yet anyway. v2: Update the comment to remove the "voodoo" Check that the last pte written matches what we readback v3: actually kill cache_level_to_agp_type since most of the flags will disappear in an upcoming patch v4: v3 was actually not what we wanted (Daniel) Make the ggtt bind assertions better and stricter (Chris) Fix some uncaught errors at gtt init (Chris) Some other random stuff that Chris wanted v5: check for i==0 in gen6_ggtt_bind_object to shut up gcc (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by [v4]: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Make the cache_level -> agp_flags conversion for pre-gen6 a tad more robust by mapping everything != CACHE_NONE to the cached agp flag - we have a 1:1 uncached mapping, but different modes of cacheable (at least on later generations). Suggested by Chris Wilson.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-04 17:21:27 +00:00
i915_gem_chipset_flush(dev);
}
int i915_gem_gtt_prepare_object(struct drm_i915_gem_object *obj)
{
if (obj->has_dma_mapping)
return 0;
if (!dma_map_sg(&obj->base.dev->pdev->dev,
obj->pages->sgl, obj->pages->nents,
PCI_DMA_BIDIRECTIONAL))
return -ENOSPC;
return 0;
}
static inline void gen8_set_pte(void __iomem *addr, gen8_gtt_pte_t pte)
{
#ifdef writeq
writeq(pte, addr);
#else
iowrite32((u32)pte, addr);
iowrite32(pte >> 32, addr + 4);
#endif
}
static void gen8_ggtt_insert_entries(struct i915_address_space *vm,
struct sg_table *st,
unsigned int first_entry,
enum i915_cache_level level)
{
struct drm_i915_private *dev_priv = vm->dev->dev_private;
gen8_gtt_pte_t __iomem *gtt_entries =
(gen8_gtt_pte_t __iomem *)dev_priv->gtt.gsm + first_entry;
int i = 0;
struct sg_page_iter sg_iter;
dma_addr_t addr;
for_each_sg_page(st->sgl, &sg_iter, st->nents, 0) {
addr = sg_dma_address(sg_iter.sg) +
(sg_iter.sg_pgoffset << PAGE_SHIFT);
gen8_set_pte(&gtt_entries[i],
gen8_pte_encode(addr, level, true));
i++;
}
/*
* XXX: This serves as a posting read to make sure that the PTE has
* actually been updated. There is some concern that even though
* registers and PTEs are within the same BAR that they are potentially
* of NUMA access patterns. Therefore, even with the way we assume
* hardware should work, we must keep this posting read for paranoia.
*/
if (i != 0)
WARN_ON(readq(&gtt_entries[i-1])
!= gen8_pte_encode(addr, level, true));
#if 0 /* TODO: Still needed on GEN8? */
/* This next bit makes the above posting read even more important. We
* want to flush the TLBs only after we're certain all the PTE updates
* have finished.
*/
I915_WRITE(GFX_FLSH_CNTL_GEN6, GFX_FLSH_CNTL_EN);
POSTING_READ(GFX_FLSH_CNTL_GEN6);
#endif
}
drm/i915: Stop using AGP layer for GEN6+ As a quick hack we make the old intel_gtt structure mutable so we can fool a bunch of the existing code which depends on elements in that data structure. We can/should try to remove this in a subsequent patch. This should preserve the old gtt init behavior which upon writing these patches seems incorrect. The next patch will fix these things. The one exception is VLV which doesn't have the preserved flush control write behavior. Since we want to do that for all GEN6+ stuff, we'll handle that in a later patch. Mainstream VLV support doesn't actually exist yet anyway. v2: Update the comment to remove the "voodoo" Check that the last pte written matches what we readback v3: actually kill cache_level_to_agp_type since most of the flags will disappear in an upcoming patch v4: v3 was actually not what we wanted (Daniel) Make the ggtt bind assertions better and stricter (Chris) Fix some uncaught errors at gtt init (Chris) Some other random stuff that Chris wanted v5: check for i==0 in gen6_ggtt_bind_object to shut up gcc (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by [v4]: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Make the cache_level -> agp_flags conversion for pre-gen6 a tad more robust by mapping everything != CACHE_NONE to the cached agp flag - we have a 1:1 uncached mapping, but different modes of cacheable (at least on later generations). Suggested by Chris Wilson.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-04 17:21:27 +00:00
/*
* Binds an object into the global gtt with the specified cache level. The object
* will be accessible to the GPU via commands whose operands reference offsets
* within the global GTT as well as accessible by the GPU through the GMADR
* mapped BAR (dev_priv->mm.gtt->gtt).
*/
static void gen6_ggtt_insert_entries(struct i915_address_space *vm,
struct sg_table *st,
unsigned int first_entry,
enum i915_cache_level level)
drm/i915: Stop using AGP layer for GEN6+ As a quick hack we make the old intel_gtt structure mutable so we can fool a bunch of the existing code which depends on elements in that data structure. We can/should try to remove this in a subsequent patch. This should preserve the old gtt init behavior which upon writing these patches seems incorrect. The next patch will fix these things. The one exception is VLV which doesn't have the preserved flush control write behavior. Since we want to do that for all GEN6+ stuff, we'll handle that in a later patch. Mainstream VLV support doesn't actually exist yet anyway. v2: Update the comment to remove the "voodoo" Check that the last pte written matches what we readback v3: actually kill cache_level_to_agp_type since most of the flags will disappear in an upcoming patch v4: v3 was actually not what we wanted (Daniel) Make the ggtt bind assertions better and stricter (Chris) Fix some uncaught errors at gtt init (Chris) Some other random stuff that Chris wanted v5: check for i==0 in gen6_ggtt_bind_object to shut up gcc (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by [v4]: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Make the cache_level -> agp_flags conversion for pre-gen6 a tad more robust by mapping everything != CACHE_NONE to the cached agp flag - we have a 1:1 uncached mapping, but different modes of cacheable (at least on later generations). Suggested by Chris Wilson.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-04 17:21:27 +00:00
{
struct drm_i915_private *dev_priv = vm->dev->dev_private;
gen6_gtt_pte_t __iomem *gtt_entries =
(gen6_gtt_pte_t __iomem *)dev_priv->gtt.gsm + first_entry;
int i = 0;
struct sg_page_iter sg_iter;
drm/i915: Stop using AGP layer for GEN6+ As a quick hack we make the old intel_gtt structure mutable so we can fool a bunch of the existing code which depends on elements in that data structure. We can/should try to remove this in a subsequent patch. This should preserve the old gtt init behavior which upon writing these patches seems incorrect. The next patch will fix these things. The one exception is VLV which doesn't have the preserved flush control write behavior. Since we want to do that for all GEN6+ stuff, we'll handle that in a later patch. Mainstream VLV support doesn't actually exist yet anyway. v2: Update the comment to remove the "voodoo" Check that the last pte written matches what we readback v3: actually kill cache_level_to_agp_type since most of the flags will disappear in an upcoming patch v4: v3 was actually not what we wanted (Daniel) Make the ggtt bind assertions better and stricter (Chris) Fix some uncaught errors at gtt init (Chris) Some other random stuff that Chris wanted v5: check for i==0 in gen6_ggtt_bind_object to shut up gcc (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by [v4]: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Make the cache_level -> agp_flags conversion for pre-gen6 a tad more robust by mapping everything != CACHE_NONE to the cached agp flag - we have a 1:1 uncached mapping, but different modes of cacheable (at least on later generations). Suggested by Chris Wilson.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-04 17:21:27 +00:00
dma_addr_t addr;
for_each_sg_page(st->sgl, &sg_iter, st->nents, 0) {
addr = sg_page_iter_dma_address(&sg_iter);
iowrite32(vm->pte_encode(addr, level, true), &gtt_entries[i]);
i++;
drm/i915: Stop using AGP layer for GEN6+ As a quick hack we make the old intel_gtt structure mutable so we can fool a bunch of the existing code which depends on elements in that data structure. We can/should try to remove this in a subsequent patch. This should preserve the old gtt init behavior which upon writing these patches seems incorrect. The next patch will fix these things. The one exception is VLV which doesn't have the preserved flush control write behavior. Since we want to do that for all GEN6+ stuff, we'll handle that in a later patch. Mainstream VLV support doesn't actually exist yet anyway. v2: Update the comment to remove the "voodoo" Check that the last pte written matches what we readback v3: actually kill cache_level_to_agp_type since most of the flags will disappear in an upcoming patch v4: v3 was actually not what we wanted (Daniel) Make the ggtt bind assertions better and stricter (Chris) Fix some uncaught errors at gtt init (Chris) Some other random stuff that Chris wanted v5: check for i==0 in gen6_ggtt_bind_object to shut up gcc (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by [v4]: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Make the cache_level -> agp_flags conversion for pre-gen6 a tad more robust by mapping everything != CACHE_NONE to the cached agp flag - we have a 1:1 uncached mapping, but different modes of cacheable (at least on later generations). Suggested by Chris Wilson.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-04 17:21:27 +00:00
}
/* XXX: This serves as a posting read to make sure that the PTE has
* actually been updated. There is some concern that even though
* registers and PTEs are within the same BAR that they are potentially
* of NUMA access patterns. Therefore, even with the way we assume
* hardware should work, we must keep this posting read for paranoia.
*/
if (i != 0)
WARN_ON(readl(&gtt_entries[i-1]) !=
vm->pte_encode(addr, level, true));
/* This next bit makes the above posting read even more important. We
* want to flush the TLBs only after we're certain all the PTE updates
* have finished.
*/
I915_WRITE(GFX_FLSH_CNTL_GEN6, GFX_FLSH_CNTL_EN);
POSTING_READ(GFX_FLSH_CNTL_GEN6);
drm/i915: Stop using AGP layer for GEN6+ As a quick hack we make the old intel_gtt structure mutable so we can fool a bunch of the existing code which depends on elements in that data structure. We can/should try to remove this in a subsequent patch. This should preserve the old gtt init behavior which upon writing these patches seems incorrect. The next patch will fix these things. The one exception is VLV which doesn't have the preserved flush control write behavior. Since we want to do that for all GEN6+ stuff, we'll handle that in a later patch. Mainstream VLV support doesn't actually exist yet anyway. v2: Update the comment to remove the "voodoo" Check that the last pte written matches what we readback v3: actually kill cache_level_to_agp_type since most of the flags will disappear in an upcoming patch v4: v3 was actually not what we wanted (Daniel) Make the ggtt bind assertions better and stricter (Chris) Fix some uncaught errors at gtt init (Chris) Some other random stuff that Chris wanted v5: check for i==0 in gen6_ggtt_bind_object to shut up gcc (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by [v4]: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Make the cache_level -> agp_flags conversion for pre-gen6 a tad more robust by mapping everything != CACHE_NONE to the cached agp flag - we have a 1:1 uncached mapping, but different modes of cacheable (at least on later generations). Suggested by Chris Wilson.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-04 17:21:27 +00:00
}
static void gen8_ggtt_clear_range(struct i915_address_space *vm,
unsigned int first_entry,
unsigned int num_entries,
bool use_scratch)
{
struct drm_i915_private *dev_priv = vm->dev->dev_private;
gen8_gtt_pte_t scratch_pte, __iomem *gtt_base =
(gen8_gtt_pte_t __iomem *) dev_priv->gtt.gsm + first_entry;
const int max_entries = gtt_total_entries(dev_priv->gtt) - first_entry;
int i;
if (WARN(num_entries > max_entries,
"First entry = %d; Num entries = %d (max=%d)\n",
first_entry, num_entries, max_entries))
num_entries = max_entries;
scratch_pte = gen8_pte_encode(vm->scratch.addr,
I915_CACHE_LLC,
use_scratch);
for (i = 0; i < num_entries; i++)
gen8_set_pte(&gtt_base[i], scratch_pte);
readl(gtt_base);
}
static void gen6_ggtt_clear_range(struct i915_address_space *vm,
unsigned int first_entry,
drm/i915: Disable GGTT PTEs on GEN6+ suspend Once the machine gets to a certain point in the suspend process, we expect the GPU to be idle. If it is not, we might corrupt memory. Empirically (with an early version of this patch) we have seen this is not the case. We cannot currently explain why the latent GPU writes occur. In the technical sense, this patch is a workaround in that we have an issue we can't explain, and the patch indirectly solves the issue. However, it's really better than a workaround because we understand why it works, and it really should be a safe thing to do in all cases. The noticeable effect other than the debug messages would be an increase in the suspend time. I have not measure how expensive it actually is. I think it would be good to spend further time to root cause why we're seeing these latent writes, but it shouldn't preclude preventing the fallout. NOTE: It should be safe (and makes some sense IMO) to also keep the VALID bit unset on resume when we clear_range(). I've opted not to do this as properly clearing those bits at some later point would be extra work. v2: Fix bugzilla link Bugzilla: http://bugs.freedesktop.org/show_bug.cgi?id=65496 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59321 Tested-by: Takashi Iwai <tiwai@suse.de> Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Tested-By: Todd Previte <tprevite@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-16 16:21:30 +00:00
unsigned int num_entries,
bool use_scratch)
{
struct drm_i915_private *dev_priv = vm->dev->dev_private;
gen6_gtt_pte_t scratch_pte, __iomem *gtt_base =
(gen6_gtt_pte_t __iomem *) dev_priv->gtt.gsm + first_entry;
const int max_entries = gtt_total_entries(dev_priv->gtt) - first_entry;
int i;
if (WARN(num_entries > max_entries,
"First entry = %d; Num entries = %d (max=%d)\n",
first_entry, num_entries, max_entries))
num_entries = max_entries;
drm/i915: Disable GGTT PTEs on GEN6+ suspend Once the machine gets to a certain point in the suspend process, we expect the GPU to be idle. If it is not, we might corrupt memory. Empirically (with an early version of this patch) we have seen this is not the case. We cannot currently explain why the latent GPU writes occur. In the technical sense, this patch is a workaround in that we have an issue we can't explain, and the patch indirectly solves the issue. However, it's really better than a workaround because we understand why it works, and it really should be a safe thing to do in all cases. The noticeable effect other than the debug messages would be an increase in the suspend time. I have not measure how expensive it actually is. I think it would be good to spend further time to root cause why we're seeing these latent writes, but it shouldn't preclude preventing the fallout. NOTE: It should be safe (and makes some sense IMO) to also keep the VALID bit unset on resume when we clear_range(). I've opted not to do this as properly clearing those bits at some later point would be extra work. v2: Fix bugzilla link Bugzilla: http://bugs.freedesktop.org/show_bug.cgi?id=65496 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59321 Tested-by: Takashi Iwai <tiwai@suse.de> Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Tested-By: Todd Previte <tprevite@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-16 16:21:30 +00:00
scratch_pte = vm->pte_encode(vm->scratch.addr, I915_CACHE_LLC, use_scratch);
for (i = 0; i < num_entries; i++)
iowrite32(scratch_pte, &gtt_base[i]);
readl(gtt_base);
}
drm/i915: Create bind/unbind abstraction for VMAs To sum up what goes on here, we abstract the vma binding, similarly to the previous object binding. This helps for distinguishing legacy binding, versus modern binding. To keep the code churn as minimal as possible, I am leaving in insert_entries(). It serves as the per platform pte writing basically. bind_vma and insert_entries do share a lot of similarities, and I did have designs to combine the two, but as mentioned already... too much churn in an already massive patchset. What follows are the 3 commits which existed discretely in the original submissions. Upon rebasing on Broadwell support, it became clear that separation was not good, and only made for more error prone code. Below are the 3 commit messages with all their history. drm/i915: Add bind/unbind object functions to VMA drm/i915: Use the new vm [un]bind functions drm/i915: reduce vm->insert_entries() usage drm/i915: Add bind/unbind object functions to VMA As we plumb the code with more VM information, it has become more obvious that the easiest way to deal with bind and unbind is to simply put the function pointers in the vm, and let those choose the correct way to handle the page table updates. This change allows many places in the code to simply be vm->bind, and not have to worry about distinguishing PPGTT vs GGTT. Notice that this patch has no impact on functionality. I've decided to save the actual change until the next patch because I think it's easier to review that way. I'm happy to squash the two, or let Daniel do it on merge. v2: Make ggtt handle the quirky aliasing ppgtt Add flags to bind object to support above Don't ever call bind/unbind directly for PPGTT until we have real, full PPGTT (use NULLs to assert this) Make sure we rebind the ggtt if there already is a ggtt binding. This happens on set cache levels. Use VMA for bind/unbind (Daniel, Ben) v3: Reorganize ggtt_vma_bind to be more concise and easier to read (Ville). Change logic in unbind to only unbind ggtt when there is a global mapping, and to remove a redundant check if the aliasing ppgtt exists. v4: Make the bind function a bit smarter about the cache levels to avoid unnecessary multiple remaps. "I accept it is a wart, I think unifying the pin_vma / bind_vma could be unified later" (Chris) Removed the git notes, and put version info here. (Daniel) v5: Update the comment to not suck (Chris) v6: Move bind/unbind to the VMA. It makes more sense in the VMA structure (always has, but I was previously lazy). With this change, it will allow us to keep a distinct insert_entries. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: Use the new vm [un]bind functions Building on the last patch which created the new function pointers in the VM for bind/unbind, here we actually put those new function pointers to use. Split out as a separate patch to aid in review. I'm fine with squashing into the previous patch if people request it. v2: Updated to address the smart ggtt which can do aliasing as needed Make sure we bind to global gtt when mappable and fenceable. I thought we could get away without this initialy, but we cannot. v3: Make the global GTT binding explicitly use the ggtt VM for bind_vma(). While at it, use the new ggtt_vma helper (Chris) At this point the original mailing list thread diverges. ie. v4^: use target_obj instead of obj for gen6 relocate_entry vma->bind_vma() can be called safely during pin. So simply do that instead of the complicated conditionals. Don't restore PPGTT bound objects on resume path Bug fix in resume path for globally bound Bos Properly handle secure dispatch Rebased on vma bind/unbind conversion Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: reduce vm->insert_entries() usage FKA: drm/i915: eliminate vm->insert_entries() With bind/unbind function pointers in place, we no longer need insert_entries. We could, and want, to remove clear_range, however it's not totally easy at this point. Since it's used in a couple of place still that don't only deal in objects: setup, ppgtt init, and restore gtt mappings. v2: Don't actually remove insert_entries, just limit its usage. It will be useful when we introduce gen8. It will always be called from the vma bind/unbind. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-06 22:10:56 +00:00
static void i915_ggtt_bind_vma(struct i915_vma *vma,
enum i915_cache_level cache_level,
u32 unused)
{
drm/i915: Create bind/unbind abstraction for VMAs To sum up what goes on here, we abstract the vma binding, similarly to the previous object binding. This helps for distinguishing legacy binding, versus modern binding. To keep the code churn as minimal as possible, I am leaving in insert_entries(). It serves as the per platform pte writing basically. bind_vma and insert_entries do share a lot of similarities, and I did have designs to combine the two, but as mentioned already... too much churn in an already massive patchset. What follows are the 3 commits which existed discretely in the original submissions. Upon rebasing on Broadwell support, it became clear that separation was not good, and only made for more error prone code. Below are the 3 commit messages with all their history. drm/i915: Add bind/unbind object functions to VMA drm/i915: Use the new vm [un]bind functions drm/i915: reduce vm->insert_entries() usage drm/i915: Add bind/unbind object functions to VMA As we plumb the code with more VM information, it has become more obvious that the easiest way to deal with bind and unbind is to simply put the function pointers in the vm, and let those choose the correct way to handle the page table updates. This change allows many places in the code to simply be vm->bind, and not have to worry about distinguishing PPGTT vs GGTT. Notice that this patch has no impact on functionality. I've decided to save the actual change until the next patch because I think it's easier to review that way. I'm happy to squash the two, or let Daniel do it on merge. v2: Make ggtt handle the quirky aliasing ppgtt Add flags to bind object to support above Don't ever call bind/unbind directly for PPGTT until we have real, full PPGTT (use NULLs to assert this) Make sure we rebind the ggtt if there already is a ggtt binding. This happens on set cache levels. Use VMA for bind/unbind (Daniel, Ben) v3: Reorganize ggtt_vma_bind to be more concise and easier to read (Ville). Change logic in unbind to only unbind ggtt when there is a global mapping, and to remove a redundant check if the aliasing ppgtt exists. v4: Make the bind function a bit smarter about the cache levels to avoid unnecessary multiple remaps. "I accept it is a wart, I think unifying the pin_vma / bind_vma could be unified later" (Chris) Removed the git notes, and put version info here. (Daniel) v5: Update the comment to not suck (Chris) v6: Move bind/unbind to the VMA. It makes more sense in the VMA structure (always has, but I was previously lazy). With this change, it will allow us to keep a distinct insert_entries. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: Use the new vm [un]bind functions Building on the last patch which created the new function pointers in the VM for bind/unbind, here we actually put those new function pointers to use. Split out as a separate patch to aid in review. I'm fine with squashing into the previous patch if people request it. v2: Updated to address the smart ggtt which can do aliasing as needed Make sure we bind to global gtt when mappable and fenceable. I thought we could get away without this initialy, but we cannot. v3: Make the global GTT binding explicitly use the ggtt VM for bind_vma(). While at it, use the new ggtt_vma helper (Chris) At this point the original mailing list thread diverges. ie. v4^: use target_obj instead of obj for gen6 relocate_entry vma->bind_vma() can be called safely during pin. So simply do that instead of the complicated conditionals. Don't restore PPGTT bound objects on resume path Bug fix in resume path for globally bound Bos Properly handle secure dispatch Rebased on vma bind/unbind conversion Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: reduce vm->insert_entries() usage FKA: drm/i915: eliminate vm->insert_entries() With bind/unbind function pointers in place, we no longer need insert_entries. We could, and want, to remove clear_range, however it's not totally easy at this point. Since it's used in a couple of place still that don't only deal in objects: setup, ppgtt init, and restore gtt mappings. v2: Don't actually remove insert_entries, just limit its usage. It will be useful when we introduce gen8. It will always be called from the vma bind/unbind. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-06 22:10:56 +00:00
const unsigned long entry = vma->node.start >> PAGE_SHIFT;
unsigned int flags = (cache_level == I915_CACHE_NONE) ?
AGP_USER_MEMORY : AGP_USER_CACHED_MEMORY;
drm/i915: Create bind/unbind abstraction for VMAs To sum up what goes on here, we abstract the vma binding, similarly to the previous object binding. This helps for distinguishing legacy binding, versus modern binding. To keep the code churn as minimal as possible, I am leaving in insert_entries(). It serves as the per platform pte writing basically. bind_vma and insert_entries do share a lot of similarities, and I did have designs to combine the two, but as mentioned already... too much churn in an already massive patchset. What follows are the 3 commits which existed discretely in the original submissions. Upon rebasing on Broadwell support, it became clear that separation was not good, and only made for more error prone code. Below are the 3 commit messages with all their history. drm/i915: Add bind/unbind object functions to VMA drm/i915: Use the new vm [un]bind functions drm/i915: reduce vm->insert_entries() usage drm/i915: Add bind/unbind object functions to VMA As we plumb the code with more VM information, it has become more obvious that the easiest way to deal with bind and unbind is to simply put the function pointers in the vm, and let those choose the correct way to handle the page table updates. This change allows many places in the code to simply be vm->bind, and not have to worry about distinguishing PPGTT vs GGTT. Notice that this patch has no impact on functionality. I've decided to save the actual change until the next patch because I think it's easier to review that way. I'm happy to squash the two, or let Daniel do it on merge. v2: Make ggtt handle the quirky aliasing ppgtt Add flags to bind object to support above Don't ever call bind/unbind directly for PPGTT until we have real, full PPGTT (use NULLs to assert this) Make sure we rebind the ggtt if there already is a ggtt binding. This happens on set cache levels. Use VMA for bind/unbind (Daniel, Ben) v3: Reorganize ggtt_vma_bind to be more concise and easier to read (Ville). Change logic in unbind to only unbind ggtt when there is a global mapping, and to remove a redundant check if the aliasing ppgtt exists. v4: Make the bind function a bit smarter about the cache levels to avoid unnecessary multiple remaps. "I accept it is a wart, I think unifying the pin_vma / bind_vma could be unified later" (Chris) Removed the git notes, and put version info here. (Daniel) v5: Update the comment to not suck (Chris) v6: Move bind/unbind to the VMA. It makes more sense in the VMA structure (always has, but I was previously lazy). With this change, it will allow us to keep a distinct insert_entries. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: Use the new vm [un]bind functions Building on the last patch which created the new function pointers in the VM for bind/unbind, here we actually put those new function pointers to use. Split out as a separate patch to aid in review. I'm fine with squashing into the previous patch if people request it. v2: Updated to address the smart ggtt which can do aliasing as needed Make sure we bind to global gtt when mappable and fenceable. I thought we could get away without this initialy, but we cannot. v3: Make the global GTT binding explicitly use the ggtt VM for bind_vma(). While at it, use the new ggtt_vma helper (Chris) At this point the original mailing list thread diverges. ie. v4^: use target_obj instead of obj for gen6 relocate_entry vma->bind_vma() can be called safely during pin. So simply do that instead of the complicated conditionals. Don't restore PPGTT bound objects on resume path Bug fix in resume path for globally bound Bos Properly handle secure dispatch Rebased on vma bind/unbind conversion Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: reduce vm->insert_entries() usage FKA: drm/i915: eliminate vm->insert_entries() With bind/unbind function pointers in place, we no longer need insert_entries. We could, and want, to remove clear_range, however it's not totally easy at this point. Since it's used in a couple of place still that don't only deal in objects: setup, ppgtt init, and restore gtt mappings. v2: Don't actually remove insert_entries, just limit its usage. It will be useful when we introduce gen8. It will always be called from the vma bind/unbind. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-06 22:10:56 +00:00
BUG_ON(!i915_is_ggtt(vma->vm));
intel_gtt_insert_sg_entries(vma->obj->pages, entry, flags);
vma->obj->has_global_gtt_mapping = 1;
}
static void i915_ggtt_clear_range(struct i915_address_space *vm,
unsigned int first_entry,
drm/i915: Disable GGTT PTEs on GEN6+ suspend Once the machine gets to a certain point in the suspend process, we expect the GPU to be idle. If it is not, we might corrupt memory. Empirically (with an early version of this patch) we have seen this is not the case. We cannot currently explain why the latent GPU writes occur. In the technical sense, this patch is a workaround in that we have an issue we can't explain, and the patch indirectly solves the issue. However, it's really better than a workaround because we understand why it works, and it really should be a safe thing to do in all cases. The noticeable effect other than the debug messages would be an increase in the suspend time. I have not measure how expensive it actually is. I think it would be good to spend further time to root cause why we're seeing these latent writes, but it shouldn't preclude preventing the fallout. NOTE: It should be safe (and makes some sense IMO) to also keep the VALID bit unset on resume when we clear_range(). I've opted not to do this as properly clearing those bits at some later point would be extra work. v2: Fix bugzilla link Bugzilla: http://bugs.freedesktop.org/show_bug.cgi?id=65496 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59321 Tested-by: Takashi Iwai <tiwai@suse.de> Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Tested-By: Todd Previte <tprevite@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-16 16:21:30 +00:00
unsigned int num_entries,
bool unused)
{
intel_gtt_clear_range(first_entry, num_entries);
}
drm/i915: Create bind/unbind abstraction for VMAs To sum up what goes on here, we abstract the vma binding, similarly to the previous object binding. This helps for distinguishing legacy binding, versus modern binding. To keep the code churn as minimal as possible, I am leaving in insert_entries(). It serves as the per platform pte writing basically. bind_vma and insert_entries do share a lot of similarities, and I did have designs to combine the two, but as mentioned already... too much churn in an already massive patchset. What follows are the 3 commits which existed discretely in the original submissions. Upon rebasing on Broadwell support, it became clear that separation was not good, and only made for more error prone code. Below are the 3 commit messages with all their history. drm/i915: Add bind/unbind object functions to VMA drm/i915: Use the new vm [un]bind functions drm/i915: reduce vm->insert_entries() usage drm/i915: Add bind/unbind object functions to VMA As we plumb the code with more VM information, it has become more obvious that the easiest way to deal with bind and unbind is to simply put the function pointers in the vm, and let those choose the correct way to handle the page table updates. This change allows many places in the code to simply be vm->bind, and not have to worry about distinguishing PPGTT vs GGTT. Notice that this patch has no impact on functionality. I've decided to save the actual change until the next patch because I think it's easier to review that way. I'm happy to squash the two, or let Daniel do it on merge. v2: Make ggtt handle the quirky aliasing ppgtt Add flags to bind object to support above Don't ever call bind/unbind directly for PPGTT until we have real, full PPGTT (use NULLs to assert this) Make sure we rebind the ggtt if there already is a ggtt binding. This happens on set cache levels. Use VMA for bind/unbind (Daniel, Ben) v3: Reorganize ggtt_vma_bind to be more concise and easier to read (Ville). Change logic in unbind to only unbind ggtt when there is a global mapping, and to remove a redundant check if the aliasing ppgtt exists. v4: Make the bind function a bit smarter about the cache levels to avoid unnecessary multiple remaps. "I accept it is a wart, I think unifying the pin_vma / bind_vma could be unified later" (Chris) Removed the git notes, and put version info here. (Daniel) v5: Update the comment to not suck (Chris) v6: Move bind/unbind to the VMA. It makes more sense in the VMA structure (always has, but I was previously lazy). With this change, it will allow us to keep a distinct insert_entries. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: Use the new vm [un]bind functions Building on the last patch which created the new function pointers in the VM for bind/unbind, here we actually put those new function pointers to use. Split out as a separate patch to aid in review. I'm fine with squashing into the previous patch if people request it. v2: Updated to address the smart ggtt which can do aliasing as needed Make sure we bind to global gtt when mappable and fenceable. I thought we could get away without this initialy, but we cannot. v3: Make the global GTT binding explicitly use the ggtt VM for bind_vma(). While at it, use the new ggtt_vma helper (Chris) At this point the original mailing list thread diverges. ie. v4^: use target_obj instead of obj for gen6 relocate_entry vma->bind_vma() can be called safely during pin. So simply do that instead of the complicated conditionals. Don't restore PPGTT bound objects on resume path Bug fix in resume path for globally bound Bos Properly handle secure dispatch Rebased on vma bind/unbind conversion Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: reduce vm->insert_entries() usage FKA: drm/i915: eliminate vm->insert_entries() With bind/unbind function pointers in place, we no longer need insert_entries. We could, and want, to remove clear_range, however it's not totally easy at this point. Since it's used in a couple of place still that don't only deal in objects: setup, ppgtt init, and restore gtt mappings. v2: Don't actually remove insert_entries, just limit its usage. It will be useful when we introduce gen8. It will always be called from the vma bind/unbind. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-06 22:10:56 +00:00
static void i915_ggtt_unbind_vma(struct i915_vma *vma)
{
const unsigned int first = vma->node.start >> PAGE_SHIFT;
const unsigned int size = vma->obj->base.size >> PAGE_SHIFT;
drm/i915: Create bind/unbind abstraction for VMAs To sum up what goes on here, we abstract the vma binding, similarly to the previous object binding. This helps for distinguishing legacy binding, versus modern binding. To keep the code churn as minimal as possible, I am leaving in insert_entries(). It serves as the per platform pte writing basically. bind_vma and insert_entries do share a lot of similarities, and I did have designs to combine the two, but as mentioned already... too much churn in an already massive patchset. What follows are the 3 commits which existed discretely in the original submissions. Upon rebasing on Broadwell support, it became clear that separation was not good, and only made for more error prone code. Below are the 3 commit messages with all their history. drm/i915: Add bind/unbind object functions to VMA drm/i915: Use the new vm [un]bind functions drm/i915: reduce vm->insert_entries() usage drm/i915: Add bind/unbind object functions to VMA As we plumb the code with more VM information, it has become more obvious that the easiest way to deal with bind and unbind is to simply put the function pointers in the vm, and let those choose the correct way to handle the page table updates. This change allows many places in the code to simply be vm->bind, and not have to worry about distinguishing PPGTT vs GGTT. Notice that this patch has no impact on functionality. I've decided to save the actual change until the next patch because I think it's easier to review that way. I'm happy to squash the two, or let Daniel do it on merge. v2: Make ggtt handle the quirky aliasing ppgtt Add flags to bind object to support above Don't ever call bind/unbind directly for PPGTT until we have real, full PPGTT (use NULLs to assert this) Make sure we rebind the ggtt if there already is a ggtt binding. This happens on set cache levels. Use VMA for bind/unbind (Daniel, Ben) v3: Reorganize ggtt_vma_bind to be more concise and easier to read (Ville). Change logic in unbind to only unbind ggtt when there is a global mapping, and to remove a redundant check if the aliasing ppgtt exists. v4: Make the bind function a bit smarter about the cache levels to avoid unnecessary multiple remaps. "I accept it is a wart, I think unifying the pin_vma / bind_vma could be unified later" (Chris) Removed the git notes, and put version info here. (Daniel) v5: Update the comment to not suck (Chris) v6: Move bind/unbind to the VMA. It makes more sense in the VMA structure (always has, but I was previously lazy). With this change, it will allow us to keep a distinct insert_entries. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: Use the new vm [un]bind functions Building on the last patch which created the new function pointers in the VM for bind/unbind, here we actually put those new function pointers to use. Split out as a separate patch to aid in review. I'm fine with squashing into the previous patch if people request it. v2: Updated to address the smart ggtt which can do aliasing as needed Make sure we bind to global gtt when mappable and fenceable. I thought we could get away without this initialy, but we cannot. v3: Make the global GTT binding explicitly use the ggtt VM for bind_vma(). While at it, use the new ggtt_vma helper (Chris) At this point the original mailing list thread diverges. ie. v4^: use target_obj instead of obj for gen6 relocate_entry vma->bind_vma() can be called safely during pin. So simply do that instead of the complicated conditionals. Don't restore PPGTT bound objects on resume path Bug fix in resume path for globally bound Bos Properly handle secure dispatch Rebased on vma bind/unbind conversion Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: reduce vm->insert_entries() usage FKA: drm/i915: eliminate vm->insert_entries() With bind/unbind function pointers in place, we no longer need insert_entries. We could, and want, to remove clear_range, however it's not totally easy at this point. Since it's used in a couple of place still that don't only deal in objects: setup, ppgtt init, and restore gtt mappings. v2: Don't actually remove insert_entries, just limit its usage. It will be useful when we introduce gen8. It will always be called from the vma bind/unbind. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-06 22:10:56 +00:00
BUG_ON(!i915_is_ggtt(vma->vm));
vma->obj->has_global_gtt_mapping = 0;
intel_gtt_clear_range(first, size);
}
static void ggtt_bind_vma(struct i915_vma *vma,
enum i915_cache_level cache_level,
u32 flags)
{
drm/i915: Create bind/unbind abstraction for VMAs To sum up what goes on here, we abstract the vma binding, similarly to the previous object binding. This helps for distinguishing legacy binding, versus modern binding. To keep the code churn as minimal as possible, I am leaving in insert_entries(). It serves as the per platform pte writing basically. bind_vma and insert_entries do share a lot of similarities, and I did have designs to combine the two, but as mentioned already... too much churn in an already massive patchset. What follows are the 3 commits which existed discretely in the original submissions. Upon rebasing on Broadwell support, it became clear that separation was not good, and only made for more error prone code. Below are the 3 commit messages with all their history. drm/i915: Add bind/unbind object functions to VMA drm/i915: Use the new vm [un]bind functions drm/i915: reduce vm->insert_entries() usage drm/i915: Add bind/unbind object functions to VMA As we plumb the code with more VM information, it has become more obvious that the easiest way to deal with bind and unbind is to simply put the function pointers in the vm, and let those choose the correct way to handle the page table updates. This change allows many places in the code to simply be vm->bind, and not have to worry about distinguishing PPGTT vs GGTT. Notice that this patch has no impact on functionality. I've decided to save the actual change until the next patch because I think it's easier to review that way. I'm happy to squash the two, or let Daniel do it on merge. v2: Make ggtt handle the quirky aliasing ppgtt Add flags to bind object to support above Don't ever call bind/unbind directly for PPGTT until we have real, full PPGTT (use NULLs to assert this) Make sure we rebind the ggtt if there already is a ggtt binding. This happens on set cache levels. Use VMA for bind/unbind (Daniel, Ben) v3: Reorganize ggtt_vma_bind to be more concise and easier to read (Ville). Change logic in unbind to only unbind ggtt when there is a global mapping, and to remove a redundant check if the aliasing ppgtt exists. v4: Make the bind function a bit smarter about the cache levels to avoid unnecessary multiple remaps. "I accept it is a wart, I think unifying the pin_vma / bind_vma could be unified later" (Chris) Removed the git notes, and put version info here. (Daniel) v5: Update the comment to not suck (Chris) v6: Move bind/unbind to the VMA. It makes more sense in the VMA structure (always has, but I was previously lazy). With this change, it will allow us to keep a distinct insert_entries. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: Use the new vm [un]bind functions Building on the last patch which created the new function pointers in the VM for bind/unbind, here we actually put those new function pointers to use. Split out as a separate patch to aid in review. I'm fine with squashing into the previous patch if people request it. v2: Updated to address the smart ggtt which can do aliasing as needed Make sure we bind to global gtt when mappable and fenceable. I thought we could get away without this initialy, but we cannot. v3: Make the global GTT binding explicitly use the ggtt VM for bind_vma(). While at it, use the new ggtt_vma helper (Chris) At this point the original mailing list thread diverges. ie. v4^: use target_obj instead of obj for gen6 relocate_entry vma->bind_vma() can be called safely during pin. So simply do that instead of the complicated conditionals. Don't restore PPGTT bound objects on resume path Bug fix in resume path for globally bound Bos Properly handle secure dispatch Rebased on vma bind/unbind conversion Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: reduce vm->insert_entries() usage FKA: drm/i915: eliminate vm->insert_entries() With bind/unbind function pointers in place, we no longer need insert_entries. We could, and want, to remove clear_range, however it's not totally easy at this point. Since it's used in a couple of place still that don't only deal in objects: setup, ppgtt init, and restore gtt mappings. v2: Don't actually remove insert_entries, just limit its usage. It will be useful when we introduce gen8. It will always be called from the vma bind/unbind. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-06 22:10:56 +00:00
struct drm_device *dev = vma->vm->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
drm/i915: Create bind/unbind abstraction for VMAs To sum up what goes on here, we abstract the vma binding, similarly to the previous object binding. This helps for distinguishing legacy binding, versus modern binding. To keep the code churn as minimal as possible, I am leaving in insert_entries(). It serves as the per platform pte writing basically. bind_vma and insert_entries do share a lot of similarities, and I did have designs to combine the two, but as mentioned already... too much churn in an already massive patchset. What follows are the 3 commits which existed discretely in the original submissions. Upon rebasing on Broadwell support, it became clear that separation was not good, and only made for more error prone code. Below are the 3 commit messages with all their history. drm/i915: Add bind/unbind object functions to VMA drm/i915: Use the new vm [un]bind functions drm/i915: reduce vm->insert_entries() usage drm/i915: Add bind/unbind object functions to VMA As we plumb the code with more VM information, it has become more obvious that the easiest way to deal with bind and unbind is to simply put the function pointers in the vm, and let those choose the correct way to handle the page table updates. This change allows many places in the code to simply be vm->bind, and not have to worry about distinguishing PPGTT vs GGTT. Notice that this patch has no impact on functionality. I've decided to save the actual change until the next patch because I think it's easier to review that way. I'm happy to squash the two, or let Daniel do it on merge. v2: Make ggtt handle the quirky aliasing ppgtt Add flags to bind object to support above Don't ever call bind/unbind directly for PPGTT until we have real, full PPGTT (use NULLs to assert this) Make sure we rebind the ggtt if there already is a ggtt binding. This happens on set cache levels. Use VMA for bind/unbind (Daniel, Ben) v3: Reorganize ggtt_vma_bind to be more concise and easier to read (Ville). Change logic in unbind to only unbind ggtt when there is a global mapping, and to remove a redundant check if the aliasing ppgtt exists. v4: Make the bind function a bit smarter about the cache levels to avoid unnecessary multiple remaps. "I accept it is a wart, I think unifying the pin_vma / bind_vma could be unified later" (Chris) Removed the git notes, and put version info here. (Daniel) v5: Update the comment to not suck (Chris) v6: Move bind/unbind to the VMA. It makes more sense in the VMA structure (always has, but I was previously lazy). With this change, it will allow us to keep a distinct insert_entries. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: Use the new vm [un]bind functions Building on the last patch which created the new function pointers in the VM for bind/unbind, here we actually put those new function pointers to use. Split out as a separate patch to aid in review. I'm fine with squashing into the previous patch if people request it. v2: Updated to address the smart ggtt which can do aliasing as needed Make sure we bind to global gtt when mappable and fenceable. I thought we could get away without this initialy, but we cannot. v3: Make the global GTT binding explicitly use the ggtt VM for bind_vma(). While at it, use the new ggtt_vma helper (Chris) At this point the original mailing list thread diverges. ie. v4^: use target_obj instead of obj for gen6 relocate_entry vma->bind_vma() can be called safely during pin. So simply do that instead of the complicated conditionals. Don't restore PPGTT bound objects on resume path Bug fix in resume path for globally bound Bos Properly handle secure dispatch Rebased on vma bind/unbind conversion Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: reduce vm->insert_entries() usage FKA: drm/i915: eliminate vm->insert_entries() With bind/unbind function pointers in place, we no longer need insert_entries. We could, and want, to remove clear_range, however it's not totally easy at this point. Since it's used in a couple of place still that don't only deal in objects: setup, ppgtt init, and restore gtt mappings. v2: Don't actually remove insert_entries, just limit its usage. It will be useful when we introduce gen8. It will always be called from the vma bind/unbind. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-06 22:10:56 +00:00
struct drm_i915_gem_object *obj = vma->obj;
const unsigned long entry = vma->node.start >> PAGE_SHIFT;
drm/i915: Create bind/unbind abstraction for VMAs To sum up what goes on here, we abstract the vma binding, similarly to the previous object binding. This helps for distinguishing legacy binding, versus modern binding. To keep the code churn as minimal as possible, I am leaving in insert_entries(). It serves as the per platform pte writing basically. bind_vma and insert_entries do share a lot of similarities, and I did have designs to combine the two, but as mentioned already... too much churn in an already massive patchset. What follows are the 3 commits which existed discretely in the original submissions. Upon rebasing on Broadwell support, it became clear that separation was not good, and only made for more error prone code. Below are the 3 commit messages with all their history. drm/i915: Add bind/unbind object functions to VMA drm/i915: Use the new vm [un]bind functions drm/i915: reduce vm->insert_entries() usage drm/i915: Add bind/unbind object functions to VMA As we plumb the code with more VM information, it has become more obvious that the easiest way to deal with bind and unbind is to simply put the function pointers in the vm, and let those choose the correct way to handle the page table updates. This change allows many places in the code to simply be vm->bind, and not have to worry about distinguishing PPGTT vs GGTT. Notice that this patch has no impact on functionality. I've decided to save the actual change until the next patch because I think it's easier to review that way. I'm happy to squash the two, or let Daniel do it on merge. v2: Make ggtt handle the quirky aliasing ppgtt Add flags to bind object to support above Don't ever call bind/unbind directly for PPGTT until we have real, full PPGTT (use NULLs to assert this) Make sure we rebind the ggtt if there already is a ggtt binding. This happens on set cache levels. Use VMA for bind/unbind (Daniel, Ben) v3: Reorganize ggtt_vma_bind to be more concise and easier to read (Ville). Change logic in unbind to only unbind ggtt when there is a global mapping, and to remove a redundant check if the aliasing ppgtt exists. v4: Make the bind function a bit smarter about the cache levels to avoid unnecessary multiple remaps. "I accept it is a wart, I think unifying the pin_vma / bind_vma could be unified later" (Chris) Removed the git notes, and put version info here. (Daniel) v5: Update the comment to not suck (Chris) v6: Move bind/unbind to the VMA. It makes more sense in the VMA structure (always has, but I was previously lazy). With this change, it will allow us to keep a distinct insert_entries. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: Use the new vm [un]bind functions Building on the last patch which created the new function pointers in the VM for bind/unbind, here we actually put those new function pointers to use. Split out as a separate patch to aid in review. I'm fine with squashing into the previous patch if people request it. v2: Updated to address the smart ggtt which can do aliasing as needed Make sure we bind to global gtt when mappable and fenceable. I thought we could get away without this initialy, but we cannot. v3: Make the global GTT binding explicitly use the ggtt VM for bind_vma(). While at it, use the new ggtt_vma helper (Chris) At this point the original mailing list thread diverges. ie. v4^: use target_obj instead of obj for gen6 relocate_entry vma->bind_vma() can be called safely during pin. So simply do that instead of the complicated conditionals. Don't restore PPGTT bound objects on resume path Bug fix in resume path for globally bound Bos Properly handle secure dispatch Rebased on vma bind/unbind conversion Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: reduce vm->insert_entries() usage FKA: drm/i915: eliminate vm->insert_entries() With bind/unbind function pointers in place, we no longer need insert_entries. We could, and want, to remove clear_range, however it's not totally easy at this point. Since it's used in a couple of place still that don't only deal in objects: setup, ppgtt init, and restore gtt mappings. v2: Don't actually remove insert_entries, just limit its usage. It will be useful when we introduce gen8. It will always be called from the vma bind/unbind. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-06 22:10:56 +00:00
/* If there is no aliasing PPGTT, or the caller needs a global mapping,
* or we have a global mapping already but the cacheability flags have
* changed, set the global PTEs.
*
* If there is an aliasing PPGTT it is anecdotally faster, so use that
* instead if none of the above hold true.
*
* NB: A global mapping should only be needed for special regions like
* "gtt mappable", SNB errata, or if specified via special execbuf
* flags. At all other times, the GPU will use the aliasing PPGTT.
*/
if (!dev_priv->mm.aliasing_ppgtt || flags & GLOBAL_BIND) {
if (!obj->has_global_gtt_mapping ||
(cache_level != obj->cache_level)) {
vma->vm->insert_entries(vma->vm, obj->pages, entry,
cache_level);
obj->has_global_gtt_mapping = 1;
}
}
drm/i915: Create bind/unbind abstraction for VMAs To sum up what goes on here, we abstract the vma binding, similarly to the previous object binding. This helps for distinguishing legacy binding, versus modern binding. To keep the code churn as minimal as possible, I am leaving in insert_entries(). It serves as the per platform pte writing basically. bind_vma and insert_entries do share a lot of similarities, and I did have designs to combine the two, but as mentioned already... too much churn in an already massive patchset. What follows are the 3 commits which existed discretely in the original submissions. Upon rebasing on Broadwell support, it became clear that separation was not good, and only made for more error prone code. Below are the 3 commit messages with all their history. drm/i915: Add bind/unbind object functions to VMA drm/i915: Use the new vm [un]bind functions drm/i915: reduce vm->insert_entries() usage drm/i915: Add bind/unbind object functions to VMA As we plumb the code with more VM information, it has become more obvious that the easiest way to deal with bind and unbind is to simply put the function pointers in the vm, and let those choose the correct way to handle the page table updates. This change allows many places in the code to simply be vm->bind, and not have to worry about distinguishing PPGTT vs GGTT. Notice that this patch has no impact on functionality. I've decided to save the actual change until the next patch because I think it's easier to review that way. I'm happy to squash the two, or let Daniel do it on merge. v2: Make ggtt handle the quirky aliasing ppgtt Add flags to bind object to support above Don't ever call bind/unbind directly for PPGTT until we have real, full PPGTT (use NULLs to assert this) Make sure we rebind the ggtt if there already is a ggtt binding. This happens on set cache levels. Use VMA for bind/unbind (Daniel, Ben) v3: Reorganize ggtt_vma_bind to be more concise and easier to read (Ville). Change logic in unbind to only unbind ggtt when there is a global mapping, and to remove a redundant check if the aliasing ppgtt exists. v4: Make the bind function a bit smarter about the cache levels to avoid unnecessary multiple remaps. "I accept it is a wart, I think unifying the pin_vma / bind_vma could be unified later" (Chris) Removed the git notes, and put version info here. (Daniel) v5: Update the comment to not suck (Chris) v6: Move bind/unbind to the VMA. It makes more sense in the VMA structure (always has, but I was previously lazy). With this change, it will allow us to keep a distinct insert_entries. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: Use the new vm [un]bind functions Building on the last patch which created the new function pointers in the VM for bind/unbind, here we actually put those new function pointers to use. Split out as a separate patch to aid in review. I'm fine with squashing into the previous patch if people request it. v2: Updated to address the smart ggtt which can do aliasing as needed Make sure we bind to global gtt when mappable and fenceable. I thought we could get away without this initialy, but we cannot. v3: Make the global GTT binding explicitly use the ggtt VM for bind_vma(). While at it, use the new ggtt_vma helper (Chris) At this point the original mailing list thread diverges. ie. v4^: use target_obj instead of obj for gen6 relocate_entry vma->bind_vma() can be called safely during pin. So simply do that instead of the complicated conditionals. Don't restore PPGTT bound objects on resume path Bug fix in resume path for globally bound Bos Properly handle secure dispatch Rebased on vma bind/unbind conversion Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: reduce vm->insert_entries() usage FKA: drm/i915: eliminate vm->insert_entries() With bind/unbind function pointers in place, we no longer need insert_entries. We could, and want, to remove clear_range, however it's not totally easy at this point. Since it's used in a couple of place still that don't only deal in objects: setup, ppgtt init, and restore gtt mappings. v2: Don't actually remove insert_entries, just limit its usage. It will be useful when we introduce gen8. It will always be called from the vma bind/unbind. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-06 22:10:56 +00:00
if (dev_priv->mm.aliasing_ppgtt &&
(!obj->has_aliasing_ppgtt_mapping ||
(cache_level != obj->cache_level))) {
struct i915_hw_ppgtt *appgtt = dev_priv->mm.aliasing_ppgtt;
appgtt->base.insert_entries(&appgtt->base,
vma->obj->pages, entry, cache_level);
vma->obj->has_aliasing_ppgtt_mapping = 1;
}
}
drm/i915: Create bind/unbind abstraction for VMAs To sum up what goes on here, we abstract the vma binding, similarly to the previous object binding. This helps for distinguishing legacy binding, versus modern binding. To keep the code churn as minimal as possible, I am leaving in insert_entries(). It serves as the per platform pte writing basically. bind_vma and insert_entries do share a lot of similarities, and I did have designs to combine the two, but as mentioned already... too much churn in an already massive patchset. What follows are the 3 commits which existed discretely in the original submissions. Upon rebasing on Broadwell support, it became clear that separation was not good, and only made for more error prone code. Below are the 3 commit messages with all their history. drm/i915: Add bind/unbind object functions to VMA drm/i915: Use the new vm [un]bind functions drm/i915: reduce vm->insert_entries() usage drm/i915: Add bind/unbind object functions to VMA As we plumb the code with more VM information, it has become more obvious that the easiest way to deal with bind and unbind is to simply put the function pointers in the vm, and let those choose the correct way to handle the page table updates. This change allows many places in the code to simply be vm->bind, and not have to worry about distinguishing PPGTT vs GGTT. Notice that this patch has no impact on functionality. I've decided to save the actual change until the next patch because I think it's easier to review that way. I'm happy to squash the two, or let Daniel do it on merge. v2: Make ggtt handle the quirky aliasing ppgtt Add flags to bind object to support above Don't ever call bind/unbind directly for PPGTT until we have real, full PPGTT (use NULLs to assert this) Make sure we rebind the ggtt if there already is a ggtt binding. This happens on set cache levels. Use VMA for bind/unbind (Daniel, Ben) v3: Reorganize ggtt_vma_bind to be more concise and easier to read (Ville). Change logic in unbind to only unbind ggtt when there is a global mapping, and to remove a redundant check if the aliasing ppgtt exists. v4: Make the bind function a bit smarter about the cache levels to avoid unnecessary multiple remaps. "I accept it is a wart, I think unifying the pin_vma / bind_vma could be unified later" (Chris) Removed the git notes, and put version info here. (Daniel) v5: Update the comment to not suck (Chris) v6: Move bind/unbind to the VMA. It makes more sense in the VMA structure (always has, but I was previously lazy). With this change, it will allow us to keep a distinct insert_entries. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: Use the new vm [un]bind functions Building on the last patch which created the new function pointers in the VM for bind/unbind, here we actually put those new function pointers to use. Split out as a separate patch to aid in review. I'm fine with squashing into the previous patch if people request it. v2: Updated to address the smart ggtt which can do aliasing as needed Make sure we bind to global gtt when mappable and fenceable. I thought we could get away without this initialy, but we cannot. v3: Make the global GTT binding explicitly use the ggtt VM for bind_vma(). While at it, use the new ggtt_vma helper (Chris) At this point the original mailing list thread diverges. ie. v4^: use target_obj instead of obj for gen6 relocate_entry vma->bind_vma() can be called safely during pin. So simply do that instead of the complicated conditionals. Don't restore PPGTT bound objects on resume path Bug fix in resume path for globally bound Bos Properly handle secure dispatch Rebased on vma bind/unbind conversion Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: reduce vm->insert_entries() usage FKA: drm/i915: eliminate vm->insert_entries() With bind/unbind function pointers in place, we no longer need insert_entries. We could, and want, to remove clear_range, however it's not totally easy at this point. Since it's used in a couple of place still that don't only deal in objects: setup, ppgtt init, and restore gtt mappings. v2: Don't actually remove insert_entries, just limit its usage. It will be useful when we introduce gen8. It will always be called from the vma bind/unbind. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-06 22:10:56 +00:00
static void ggtt_unbind_vma(struct i915_vma *vma)
{
drm/i915: Create bind/unbind abstraction for VMAs To sum up what goes on here, we abstract the vma binding, similarly to the previous object binding. This helps for distinguishing legacy binding, versus modern binding. To keep the code churn as minimal as possible, I am leaving in insert_entries(). It serves as the per platform pte writing basically. bind_vma and insert_entries do share a lot of similarities, and I did have designs to combine the two, but as mentioned already... too much churn in an already massive patchset. What follows are the 3 commits which existed discretely in the original submissions. Upon rebasing on Broadwell support, it became clear that separation was not good, and only made for more error prone code. Below are the 3 commit messages with all their history. drm/i915: Add bind/unbind object functions to VMA drm/i915: Use the new vm [un]bind functions drm/i915: reduce vm->insert_entries() usage drm/i915: Add bind/unbind object functions to VMA As we plumb the code with more VM information, it has become more obvious that the easiest way to deal with bind and unbind is to simply put the function pointers in the vm, and let those choose the correct way to handle the page table updates. This change allows many places in the code to simply be vm->bind, and not have to worry about distinguishing PPGTT vs GGTT. Notice that this patch has no impact on functionality. I've decided to save the actual change until the next patch because I think it's easier to review that way. I'm happy to squash the two, or let Daniel do it on merge. v2: Make ggtt handle the quirky aliasing ppgtt Add flags to bind object to support above Don't ever call bind/unbind directly for PPGTT until we have real, full PPGTT (use NULLs to assert this) Make sure we rebind the ggtt if there already is a ggtt binding. This happens on set cache levels. Use VMA for bind/unbind (Daniel, Ben) v3: Reorganize ggtt_vma_bind to be more concise and easier to read (Ville). Change logic in unbind to only unbind ggtt when there is a global mapping, and to remove a redundant check if the aliasing ppgtt exists. v4: Make the bind function a bit smarter about the cache levels to avoid unnecessary multiple remaps. "I accept it is a wart, I think unifying the pin_vma / bind_vma could be unified later" (Chris) Removed the git notes, and put version info here. (Daniel) v5: Update the comment to not suck (Chris) v6: Move bind/unbind to the VMA. It makes more sense in the VMA structure (always has, but I was previously lazy). With this change, it will allow us to keep a distinct insert_entries. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: Use the new vm [un]bind functions Building on the last patch which created the new function pointers in the VM for bind/unbind, here we actually put those new function pointers to use. Split out as a separate patch to aid in review. I'm fine with squashing into the previous patch if people request it. v2: Updated to address the smart ggtt which can do aliasing as needed Make sure we bind to global gtt when mappable and fenceable. I thought we could get away without this initialy, but we cannot. v3: Make the global GTT binding explicitly use the ggtt VM for bind_vma(). While at it, use the new ggtt_vma helper (Chris) At this point the original mailing list thread diverges. ie. v4^: use target_obj instead of obj for gen6 relocate_entry vma->bind_vma() can be called safely during pin. So simply do that instead of the complicated conditionals. Don't restore PPGTT bound objects on resume path Bug fix in resume path for globally bound Bos Properly handle secure dispatch Rebased on vma bind/unbind conversion Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: reduce vm->insert_entries() usage FKA: drm/i915: eliminate vm->insert_entries() With bind/unbind function pointers in place, we no longer need insert_entries. We could, and want, to remove clear_range, however it's not totally easy at this point. Since it's used in a couple of place still that don't only deal in objects: setup, ppgtt init, and restore gtt mappings. v2: Don't actually remove insert_entries, just limit its usage. It will be useful when we introduce gen8. It will always be called from the vma bind/unbind. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-06 22:10:56 +00:00
struct drm_device *dev = vma->vm->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
drm/i915: Create bind/unbind abstraction for VMAs To sum up what goes on here, we abstract the vma binding, similarly to the previous object binding. This helps for distinguishing legacy binding, versus modern binding. To keep the code churn as minimal as possible, I am leaving in insert_entries(). It serves as the per platform pte writing basically. bind_vma and insert_entries do share a lot of similarities, and I did have designs to combine the two, but as mentioned already... too much churn in an already massive patchset. What follows are the 3 commits which existed discretely in the original submissions. Upon rebasing on Broadwell support, it became clear that separation was not good, and only made for more error prone code. Below are the 3 commit messages with all their history. drm/i915: Add bind/unbind object functions to VMA drm/i915: Use the new vm [un]bind functions drm/i915: reduce vm->insert_entries() usage drm/i915: Add bind/unbind object functions to VMA As we plumb the code with more VM information, it has become more obvious that the easiest way to deal with bind and unbind is to simply put the function pointers in the vm, and let those choose the correct way to handle the page table updates. This change allows many places in the code to simply be vm->bind, and not have to worry about distinguishing PPGTT vs GGTT. Notice that this patch has no impact on functionality. I've decided to save the actual change until the next patch because I think it's easier to review that way. I'm happy to squash the two, or let Daniel do it on merge. v2: Make ggtt handle the quirky aliasing ppgtt Add flags to bind object to support above Don't ever call bind/unbind directly for PPGTT until we have real, full PPGTT (use NULLs to assert this) Make sure we rebind the ggtt if there already is a ggtt binding. This happens on set cache levels. Use VMA for bind/unbind (Daniel, Ben) v3: Reorganize ggtt_vma_bind to be more concise and easier to read (Ville). Change logic in unbind to only unbind ggtt when there is a global mapping, and to remove a redundant check if the aliasing ppgtt exists. v4: Make the bind function a bit smarter about the cache levels to avoid unnecessary multiple remaps. "I accept it is a wart, I think unifying the pin_vma / bind_vma could be unified later" (Chris) Removed the git notes, and put version info here. (Daniel) v5: Update the comment to not suck (Chris) v6: Move bind/unbind to the VMA. It makes more sense in the VMA structure (always has, but I was previously lazy). With this change, it will allow us to keep a distinct insert_entries. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: Use the new vm [un]bind functions Building on the last patch which created the new function pointers in the VM for bind/unbind, here we actually put those new function pointers to use. Split out as a separate patch to aid in review. I'm fine with squashing into the previous patch if people request it. v2: Updated to address the smart ggtt which can do aliasing as needed Make sure we bind to global gtt when mappable and fenceable. I thought we could get away without this initialy, but we cannot. v3: Make the global GTT binding explicitly use the ggtt VM for bind_vma(). While at it, use the new ggtt_vma helper (Chris) At this point the original mailing list thread diverges. ie. v4^: use target_obj instead of obj for gen6 relocate_entry vma->bind_vma() can be called safely during pin. So simply do that instead of the complicated conditionals. Don't restore PPGTT bound objects on resume path Bug fix in resume path for globally bound Bos Properly handle secure dispatch Rebased on vma bind/unbind conversion Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: reduce vm->insert_entries() usage FKA: drm/i915: eliminate vm->insert_entries() With bind/unbind function pointers in place, we no longer need insert_entries. We could, and want, to remove clear_range, however it's not totally easy at this point. Since it's used in a couple of place still that don't only deal in objects: setup, ppgtt init, and restore gtt mappings. v2: Don't actually remove insert_entries, just limit its usage. It will be useful when we introduce gen8. It will always be called from the vma bind/unbind. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-06 22:10:56 +00:00
struct drm_i915_gem_object *obj = vma->obj;
const unsigned long entry = vma->node.start >> PAGE_SHIFT;
if (obj->has_global_gtt_mapping) {
vma->vm->clear_range(vma->vm, entry,
vma->obj->base.size >> PAGE_SHIFT,
true);
obj->has_global_gtt_mapping = 0;
}
drm/i915: Create bind/unbind abstraction for VMAs To sum up what goes on here, we abstract the vma binding, similarly to the previous object binding. This helps for distinguishing legacy binding, versus modern binding. To keep the code churn as minimal as possible, I am leaving in insert_entries(). It serves as the per platform pte writing basically. bind_vma and insert_entries do share a lot of similarities, and I did have designs to combine the two, but as mentioned already... too much churn in an already massive patchset. What follows are the 3 commits which existed discretely in the original submissions. Upon rebasing on Broadwell support, it became clear that separation was not good, and only made for more error prone code. Below are the 3 commit messages with all their history. drm/i915: Add bind/unbind object functions to VMA drm/i915: Use the new vm [un]bind functions drm/i915: reduce vm->insert_entries() usage drm/i915: Add bind/unbind object functions to VMA As we plumb the code with more VM information, it has become more obvious that the easiest way to deal with bind and unbind is to simply put the function pointers in the vm, and let those choose the correct way to handle the page table updates. This change allows many places in the code to simply be vm->bind, and not have to worry about distinguishing PPGTT vs GGTT. Notice that this patch has no impact on functionality. I've decided to save the actual change until the next patch because I think it's easier to review that way. I'm happy to squash the two, or let Daniel do it on merge. v2: Make ggtt handle the quirky aliasing ppgtt Add flags to bind object to support above Don't ever call bind/unbind directly for PPGTT until we have real, full PPGTT (use NULLs to assert this) Make sure we rebind the ggtt if there already is a ggtt binding. This happens on set cache levels. Use VMA for bind/unbind (Daniel, Ben) v3: Reorganize ggtt_vma_bind to be more concise and easier to read (Ville). Change logic in unbind to only unbind ggtt when there is a global mapping, and to remove a redundant check if the aliasing ppgtt exists. v4: Make the bind function a bit smarter about the cache levels to avoid unnecessary multiple remaps. "I accept it is a wart, I think unifying the pin_vma / bind_vma could be unified later" (Chris) Removed the git notes, and put version info here. (Daniel) v5: Update the comment to not suck (Chris) v6: Move bind/unbind to the VMA. It makes more sense in the VMA structure (always has, but I was previously lazy). With this change, it will allow us to keep a distinct insert_entries. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: Use the new vm [un]bind functions Building on the last patch which created the new function pointers in the VM for bind/unbind, here we actually put those new function pointers to use. Split out as a separate patch to aid in review. I'm fine with squashing into the previous patch if people request it. v2: Updated to address the smart ggtt which can do aliasing as needed Make sure we bind to global gtt when mappable and fenceable. I thought we could get away without this initialy, but we cannot. v3: Make the global GTT binding explicitly use the ggtt VM for bind_vma(). While at it, use the new ggtt_vma helper (Chris) At this point the original mailing list thread diverges. ie. v4^: use target_obj instead of obj for gen6 relocate_entry vma->bind_vma() can be called safely during pin. So simply do that instead of the complicated conditionals. Don't restore PPGTT bound objects on resume path Bug fix in resume path for globally bound Bos Properly handle secure dispatch Rebased on vma bind/unbind conversion Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: reduce vm->insert_entries() usage FKA: drm/i915: eliminate vm->insert_entries() With bind/unbind function pointers in place, we no longer need insert_entries. We could, and want, to remove clear_range, however it's not totally easy at this point. Since it's used in a couple of place still that don't only deal in objects: setup, ppgtt init, and restore gtt mappings. v2: Don't actually remove insert_entries, just limit its usage. It will be useful when we introduce gen8. It will always be called from the vma bind/unbind. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-06 22:10:56 +00:00
if (obj->has_aliasing_ppgtt_mapping) {
struct i915_hw_ppgtt *appgtt = dev_priv->mm.aliasing_ppgtt;
appgtt->base.clear_range(&appgtt->base,
entry,
obj->base.size >> PAGE_SHIFT,
true);
obj->has_aliasing_ppgtt_mapping = 0;
}
}
void i915_gem_gtt_finish_object(struct drm_i915_gem_object *obj)
{
struct drm_device *dev = obj->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
bool interruptible;
interruptible = do_idling(dev_priv);
if (!obj->has_dma_mapping)
dma_unmap_sg(&dev->pdev->dev,
obj->pages->sgl, obj->pages->nents,
PCI_DMA_BIDIRECTIONAL);
undo_idling(dev_priv, interruptible);
}
static void i915_gtt_color_adjust(struct drm_mm_node *node,
unsigned long color,
unsigned long *start,
unsigned long *end)
{
if (node->color != color)
*start += 4096;
if (!list_empty(&node->node_list)) {
node = list_entry(node->node_list.next,
struct drm_mm_node,
node_list);
if (node->allocated && node->color != color)
*end -= 4096;
}
}
void i915_gem_setup_global_gtt(struct drm_device *dev,
unsigned long start,
unsigned long mappable_end,
unsigned long end)
{
/* Let GEM Manage all of the aperture.
*
* However, leave one page at the end still bound to the scratch page.
* There are a number of places where the hardware apparently prefetches
* past the end of the object, and we've seen multiple hangs with the
* GPU head pointer stuck in a batchbuffer bound at the last page of the
* aperture. One page should be enough to keep any prefetching inside
* of the aperture.
*/
struct drm_i915_private *dev_priv = dev->dev_private;
struct i915_address_space *ggtt_vm = &dev_priv->gtt.base;
struct drm_mm_node *entry;
struct drm_i915_gem_object *obj;
unsigned long hole_start, hole_end;
BUG_ON(mappable_end > end);
/* Subtract the guard page ... */
drm_mm_init(&ggtt_vm->mm, start, end - start - PAGE_SIZE);
if (!HAS_LLC(dev))
dev_priv->gtt.base.mm.color_adjust = i915_gtt_color_adjust;
/* Mark any preallocated objects as occupied */
list_for_each_entry(obj, &dev_priv->mm.bound_list, global_list) {
struct i915_vma *vma = i915_gem_obj_to_vma(obj, ggtt_vm);
int ret;
DRM_DEBUG_KMS("reserving preallocated space: %lx + %zx\n",
i915_gem_obj_ggtt_offset(obj), obj->base.size);
WARN_ON(i915_gem_obj_ggtt_bound(obj));
ret = drm_mm_reserve_node(&ggtt_vm->mm, &vma->node);
if (ret)
DRM_DEBUG_KMS("Reservation failed\n");
obj->has_global_gtt_mapping = 1;
}
dev_priv->gtt.base.start = start;
dev_priv->gtt.base.total = end - start;
/* Clear any non-preallocated blocks */
drm_mm_for_each_hole(entry, &ggtt_vm->mm, hole_start, hole_end) {
const unsigned long count = (hole_end - hole_start) / PAGE_SIZE;
DRM_DEBUG_KMS("clearing unused GTT space: [%lx, %lx]\n",
hole_start, hole_end);
drm/i915: Disable GGTT PTEs on GEN6+ suspend Once the machine gets to a certain point in the suspend process, we expect the GPU to be idle. If it is not, we might corrupt memory. Empirically (with an early version of this patch) we have seen this is not the case. We cannot currently explain why the latent GPU writes occur. In the technical sense, this patch is a workaround in that we have an issue we can't explain, and the patch indirectly solves the issue. However, it's really better than a workaround because we understand why it works, and it really should be a safe thing to do in all cases. The noticeable effect other than the debug messages would be an increase in the suspend time. I have not measure how expensive it actually is. I think it would be good to spend further time to root cause why we're seeing these latent writes, but it shouldn't preclude preventing the fallout. NOTE: It should be safe (and makes some sense IMO) to also keep the VALID bit unset on resume when we clear_range(). I've opted not to do this as properly clearing those bits at some later point would be extra work. v2: Fix bugzilla link Bugzilla: http://bugs.freedesktop.org/show_bug.cgi?id=65496 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59321 Tested-by: Takashi Iwai <tiwai@suse.de> Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Tested-By: Todd Previte <tprevite@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-16 16:21:30 +00:00
ggtt_vm->clear_range(ggtt_vm, hole_start / PAGE_SIZE, count, true);
}
/* And finally clear the reserved guard page */
drm/i915: Disable GGTT PTEs on GEN6+ suspend Once the machine gets to a certain point in the suspend process, we expect the GPU to be idle. If it is not, we might corrupt memory. Empirically (with an early version of this patch) we have seen this is not the case. We cannot currently explain why the latent GPU writes occur. In the technical sense, this patch is a workaround in that we have an issue we can't explain, and the patch indirectly solves the issue. However, it's really better than a workaround because we understand why it works, and it really should be a safe thing to do in all cases. The noticeable effect other than the debug messages would be an increase in the suspend time. I have not measure how expensive it actually is. I think it would be good to spend further time to root cause why we're seeing these latent writes, but it shouldn't preclude preventing the fallout. NOTE: It should be safe (and makes some sense IMO) to also keep the VALID bit unset on resume when we clear_range(). I've opted not to do this as properly clearing those bits at some later point would be extra work. v2: Fix bugzilla link Bugzilla: http://bugs.freedesktop.org/show_bug.cgi?id=65496 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59321 Tested-by: Takashi Iwai <tiwai@suse.de> Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Tested-By: Todd Previte <tprevite@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-16 16:21:30 +00:00
ggtt_vm->clear_range(ggtt_vm, end / PAGE_SIZE - 1, 1, true);
drm/i915: Stop using AGP layer for GEN6+ As a quick hack we make the old intel_gtt structure mutable so we can fool a bunch of the existing code which depends on elements in that data structure. We can/should try to remove this in a subsequent patch. This should preserve the old gtt init behavior which upon writing these patches seems incorrect. The next patch will fix these things. The one exception is VLV which doesn't have the preserved flush control write behavior. Since we want to do that for all GEN6+ stuff, we'll handle that in a later patch. Mainstream VLV support doesn't actually exist yet anyway. v2: Update the comment to remove the "voodoo" Check that the last pte written matches what we readback v3: actually kill cache_level_to_agp_type since most of the flags will disappear in an upcoming patch v4: v3 was actually not what we wanted (Daniel) Make the ggtt bind assertions better and stricter (Chris) Fix some uncaught errors at gtt init (Chris) Some other random stuff that Chris wanted v5: check for i==0 in gen6_ggtt_bind_object to shut up gcc (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by [v4]: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Make the cache_level -> agp_flags conversion for pre-gen6 a tad more robust by mapping everything != CACHE_NONE to the cached agp flag - we have a 1:1 uncached mapping, but different modes of cacheable (at least on later generations). Suggested by Chris Wilson.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-04 17:21:27 +00:00
}
void i915_gem_init_global_gtt(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
unsigned long gtt_size, mappable_size;
gtt_size = dev_priv->gtt.base.total;
mappable_size = dev_priv->gtt.mappable_end;
drm/i915: Use drm_mm for PPGTT PDEs When PPGTT support was originally enabled, it was only designed to support 1 PPGTT. It therefore made sense to simply hide the GGTT space required to enable this from the drm_mm allocator. Since we intend to support full PPGTT, which means more than 1, and they can be created and destroyed ad hoc it will be required to use the proper allocation techniques we already have. The first step here is to make the existing single PPGTT use the allocator. The astute observer will notice that we are reserving space in the GGTT for the PDEs for the lifetime of the address space, and would be right to question whether or not this is a good idea. It does not make a difference with this current patch only the aliasing PPGTT (indeed the PDEs should still be hidden from the shrinker). For the future, we are allocating from top to bottom to avoid using the precious "gtt space" The GGTT space at that point should only be used for scanout, HW contexts, ringbuffers, HWSP, PDEs, and a couple of other small buffers (potentially) used by the kernel. Everything else should be mapped into a PPGTT. To put the consumption in more tangible terms, it takes approximately 4 sets of PDEs to equal one 19x10 framebuffer (with no fancy stride or alignment constraints). 3/4 of the total [average] GGTT can be used for PDEs, and hopefully never touch the 1/4 that the framebuffer needs. The astute, and persistent observer might ask about the page tables which are also pinned for the address space. This waste is unfortunate. We use 2MB of memory per address space. We leave wrapping the PDEs as a real GEM object as a TODO. v2: Align PDEs to 64b in GTT Allocate the node dynamically so we can use drm_mm_put_block Now tested on IGT Allocate node at the top to avoid fragmentation (Chris) v3: Use Chris' top down allocator v4: Embed drm_mm_node into ppgtt struct (Jesse) Remove hunks which didn't belong (Jesse) v5: Don't subtract guard page since we now killed the guard page prior to this patch. (Ben) v6: Rebased and removed guard page stuff. Added a chunk to the commit message Allow adding a context to mappable region v7: Undo v3, so we can make the drm patch last in the series Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v4) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> squash: drm/i915: allow PPGTT to use mappable Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-06 22:11:07 +00:00
i915_gem_setup_global_gtt(dev, 0, mappable_size, gtt_size);
if (USES_ALIASING_PPGTT(dev)) {
struct i915_hw_ppgtt *ppgtt;
int ret;
ppgtt = kzalloc(sizeof(*ppgtt), GFP_KERNEL);
if (!ppgtt) {
DRM_ERROR("Aliased PPGTT setup failed -ENOMEM\n");
return;
}
ret = i915_gem_init_ppgtt(dev, ppgtt);
if (!ret) {
dev_priv->mm.aliasing_ppgtt = ppgtt;
return;
}
kfree(ppgtt);
DRM_ERROR("Aliased PPGTT setup failed %d\n", ret);
}
drm/i915: Stop using AGP layer for GEN6+ As a quick hack we make the old intel_gtt structure mutable so we can fool a bunch of the existing code which depends on elements in that data structure. We can/should try to remove this in a subsequent patch. This should preserve the old gtt init behavior which upon writing these patches seems incorrect. The next patch will fix these things. The one exception is VLV which doesn't have the preserved flush control write behavior. Since we want to do that for all GEN6+ stuff, we'll handle that in a later patch. Mainstream VLV support doesn't actually exist yet anyway. v2: Update the comment to remove the "voodoo" Check that the last pte written matches what we readback v3: actually kill cache_level_to_agp_type since most of the flags will disappear in an upcoming patch v4: v3 was actually not what we wanted (Daniel) Make the ggtt bind assertions better and stricter (Chris) Fix some uncaught errors at gtt init (Chris) Some other random stuff that Chris wanted v5: check for i==0 in gen6_ggtt_bind_object to shut up gcc (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by [v4]: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Make the cache_level -> agp_flags conversion for pre-gen6 a tad more robust by mapping everything != CACHE_NONE to the cached agp flag - we have a 1:1 uncached mapping, but different modes of cacheable (at least on later generations). Suggested by Chris Wilson.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-04 17:21:27 +00:00
}
static int setup_scratch_page(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct page *page;
dma_addr_t dma_addr;
page = alloc_page(GFP_KERNEL | GFP_DMA32 | __GFP_ZERO);
if (page == NULL)
return -ENOMEM;
get_page(page);
set_pages_uc(page, 1);
#ifdef CONFIG_INTEL_IOMMU
dma_addr = pci_map_page(dev->pdev, page, 0, PAGE_SIZE,
PCI_DMA_BIDIRECTIONAL);
if (pci_dma_mapping_error(dev->pdev, dma_addr))
return -EINVAL;
#else
dma_addr = page_to_phys(page);
#endif
dev_priv->gtt.base.scratch.page = page;
dev_priv->gtt.base.scratch.addr = dma_addr;
drm/i915: Stop using AGP layer for GEN6+ As a quick hack we make the old intel_gtt structure mutable so we can fool a bunch of the existing code which depends on elements in that data structure. We can/should try to remove this in a subsequent patch. This should preserve the old gtt init behavior which upon writing these patches seems incorrect. The next patch will fix these things. The one exception is VLV which doesn't have the preserved flush control write behavior. Since we want to do that for all GEN6+ stuff, we'll handle that in a later patch. Mainstream VLV support doesn't actually exist yet anyway. v2: Update the comment to remove the "voodoo" Check that the last pte written matches what we readback v3: actually kill cache_level_to_agp_type since most of the flags will disappear in an upcoming patch v4: v3 was actually not what we wanted (Daniel) Make the ggtt bind assertions better and stricter (Chris) Fix some uncaught errors at gtt init (Chris) Some other random stuff that Chris wanted v5: check for i==0 in gen6_ggtt_bind_object to shut up gcc (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by [v4]: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Make the cache_level -> agp_flags conversion for pre-gen6 a tad more robust by mapping everything != CACHE_NONE to the cached agp flag - we have a 1:1 uncached mapping, but different modes of cacheable (at least on later generations). Suggested by Chris Wilson.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-04 17:21:27 +00:00
return 0;
}
static void teardown_scratch_page(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct page *page = dev_priv->gtt.base.scratch.page;
set_pages_wb(page, 1);
pci_unmap_page(dev->pdev, dev_priv->gtt.base.scratch.addr,
drm/i915: Stop using AGP layer for GEN6+ As a quick hack we make the old intel_gtt structure mutable so we can fool a bunch of the existing code which depends on elements in that data structure. We can/should try to remove this in a subsequent patch. This should preserve the old gtt init behavior which upon writing these patches seems incorrect. The next patch will fix these things. The one exception is VLV which doesn't have the preserved flush control write behavior. Since we want to do that for all GEN6+ stuff, we'll handle that in a later patch. Mainstream VLV support doesn't actually exist yet anyway. v2: Update the comment to remove the "voodoo" Check that the last pte written matches what we readback v3: actually kill cache_level_to_agp_type since most of the flags will disappear in an upcoming patch v4: v3 was actually not what we wanted (Daniel) Make the ggtt bind assertions better and stricter (Chris) Fix some uncaught errors at gtt init (Chris) Some other random stuff that Chris wanted v5: check for i==0 in gen6_ggtt_bind_object to shut up gcc (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by [v4]: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Make the cache_level -> agp_flags conversion for pre-gen6 a tad more robust by mapping everything != CACHE_NONE to the cached agp flag - we have a 1:1 uncached mapping, but different modes of cacheable (at least on later generations). Suggested by Chris Wilson.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-04 17:21:27 +00:00
PAGE_SIZE, PCI_DMA_BIDIRECTIONAL);
put_page(page);
__free_page(page);
drm/i915: Stop using AGP layer for GEN6+ As a quick hack we make the old intel_gtt structure mutable so we can fool a bunch of the existing code which depends on elements in that data structure. We can/should try to remove this in a subsequent patch. This should preserve the old gtt init behavior which upon writing these patches seems incorrect. The next patch will fix these things. The one exception is VLV which doesn't have the preserved flush control write behavior. Since we want to do that for all GEN6+ stuff, we'll handle that in a later patch. Mainstream VLV support doesn't actually exist yet anyway. v2: Update the comment to remove the "voodoo" Check that the last pte written matches what we readback v3: actually kill cache_level_to_agp_type since most of the flags will disappear in an upcoming patch v4: v3 was actually not what we wanted (Daniel) Make the ggtt bind assertions better and stricter (Chris) Fix some uncaught errors at gtt init (Chris) Some other random stuff that Chris wanted v5: check for i==0 in gen6_ggtt_bind_object to shut up gcc (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by [v4]: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Make the cache_level -> agp_flags conversion for pre-gen6 a tad more robust by mapping everything != CACHE_NONE to the cached agp flag - we have a 1:1 uncached mapping, but different modes of cacheable (at least on later generations). Suggested by Chris Wilson.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-04 17:21:27 +00:00
}
static inline unsigned int gen6_get_total_gtt_size(u16 snb_gmch_ctl)
{
snb_gmch_ctl >>= SNB_GMCH_GGMS_SHIFT;
snb_gmch_ctl &= SNB_GMCH_GGMS_MASK;
return snb_gmch_ctl << 20;
}
static inline unsigned int gen8_get_total_gtt_size(u16 bdw_gmch_ctl)
{
bdw_gmch_ctl >>= BDW_GMCH_GGMS_SHIFT;
bdw_gmch_ctl &= BDW_GMCH_GGMS_MASK;
if (bdw_gmch_ctl)
bdw_gmch_ctl = 1 << bdw_gmch_ctl;
if (bdw_gmch_ctl > 4) {
WARN_ON(!i915_preliminary_hw_support);
return 4<<20;
}
return bdw_gmch_ctl << 20;
}
static inline size_t gen6_get_stolen_size(u16 snb_gmch_ctl)
drm/i915: Stop using AGP layer for GEN6+ As a quick hack we make the old intel_gtt structure mutable so we can fool a bunch of the existing code which depends on elements in that data structure. We can/should try to remove this in a subsequent patch. This should preserve the old gtt init behavior which upon writing these patches seems incorrect. The next patch will fix these things. The one exception is VLV which doesn't have the preserved flush control write behavior. Since we want to do that for all GEN6+ stuff, we'll handle that in a later patch. Mainstream VLV support doesn't actually exist yet anyway. v2: Update the comment to remove the "voodoo" Check that the last pte written matches what we readback v3: actually kill cache_level_to_agp_type since most of the flags will disappear in an upcoming patch v4: v3 was actually not what we wanted (Daniel) Make the ggtt bind assertions better and stricter (Chris) Fix some uncaught errors at gtt init (Chris) Some other random stuff that Chris wanted v5: check for i==0 in gen6_ggtt_bind_object to shut up gcc (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by [v4]: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Make the cache_level -> agp_flags conversion for pre-gen6 a tad more robust by mapping everything != CACHE_NONE to the cached agp flag - we have a 1:1 uncached mapping, but different modes of cacheable (at least on later generations). Suggested by Chris Wilson.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-04 17:21:27 +00:00
{
snb_gmch_ctl >>= SNB_GMCH_GMS_SHIFT;
snb_gmch_ctl &= SNB_GMCH_GMS_MASK;
return snb_gmch_ctl << 25; /* 32 MB units */
}
static inline size_t gen8_get_stolen_size(u16 bdw_gmch_ctl)
{
bdw_gmch_ctl >>= BDW_GMCH_GMS_SHIFT;
bdw_gmch_ctl &= BDW_GMCH_GMS_MASK;
return bdw_gmch_ctl << 25; /* 32 MB units */
}
static int ggtt_probe_common(struct drm_device *dev,
size_t gtt_size)
{
struct drm_i915_private *dev_priv = dev->dev_private;
phys_addr_t gtt_bus_addr;
int ret;
/* For Modern GENs the PTEs and register space are split in the BAR */
gtt_bus_addr = pci_resource_start(dev->pdev, 0) +
(pci_resource_len(dev->pdev, 0) / 2);
dev_priv->gtt.gsm = ioremap_wc(gtt_bus_addr, gtt_size);
if (!dev_priv->gtt.gsm) {
DRM_ERROR("Failed to map the gtt page table\n");
return -ENOMEM;
}
ret = setup_scratch_page(dev);
if (ret) {
DRM_ERROR("Scratch setup failed\n");
/* iounmap will also get called at remove, but meh */
iounmap(dev_priv->gtt.gsm);
}
return ret;
}
/* The GGTT and PPGTT need a private PPAT setup in order to handle cacheability
* bits. When using advanced contexts each context stores its own PAT, but
* writing this data shouldn't be harmful even in those cases. */
static void gen8_setup_private_ppat(struct drm_i915_private *dev_priv)
{
#define GEN8_PPAT_UC (0<<0)
#define GEN8_PPAT_WC (1<<0)
#define GEN8_PPAT_WT (2<<0)
#define GEN8_PPAT_WB (3<<0)
#define GEN8_PPAT_ELLC_OVERRIDE (0<<2)
/* FIXME(BDW): Bspec is completely confused about cache control bits. */
#define GEN8_PPAT_LLC (1<<2)
#define GEN8_PPAT_LLCELLC (2<<2)
#define GEN8_PPAT_LLCeLLC (3<<2)
#define GEN8_PPAT_AGE(x) (x<<4)
#define GEN8_PPAT(i, x) ((uint64_t) (x) << ((i) * 8))
uint64_t pat;
pat = GEN8_PPAT(0, GEN8_PPAT_WB | GEN8_PPAT_LLC) | /* for normal objects, no eLLC */
GEN8_PPAT(1, GEN8_PPAT_WC | GEN8_PPAT_LLCELLC) | /* for something pointing to ptes? */
GEN8_PPAT(2, GEN8_PPAT_WT | GEN8_PPAT_LLCELLC) | /* for scanout with eLLC */
GEN8_PPAT(3, GEN8_PPAT_UC) | /* Uncached objects, mostly for scanout */
GEN8_PPAT(4, GEN8_PPAT_WB | GEN8_PPAT_LLCELLC | GEN8_PPAT_AGE(0)) |
GEN8_PPAT(5, GEN8_PPAT_WB | GEN8_PPAT_LLCELLC | GEN8_PPAT_AGE(1)) |
GEN8_PPAT(6, GEN8_PPAT_WB | GEN8_PPAT_LLCELLC | GEN8_PPAT_AGE(2)) |
GEN8_PPAT(7, GEN8_PPAT_WB | GEN8_PPAT_LLCELLC | GEN8_PPAT_AGE(3));
/* XXX: spec defines this as 2 distinct registers. It's unclear if a 64b
* write would work. */
I915_WRITE(GEN8_PRIVATE_PAT, pat);
I915_WRITE(GEN8_PRIVATE_PAT + 4, pat >> 32);
}
static int gen8_gmch_probe(struct drm_device *dev,
size_t *gtt_total,
size_t *stolen,
phys_addr_t *mappable_base,
unsigned long *mappable_end)
{
struct drm_i915_private *dev_priv = dev->dev_private;
unsigned int gtt_size;
u16 snb_gmch_ctl;
int ret;
/* TODO: We're not aware of mappable constraints on gen8 yet */
*mappable_base = pci_resource_start(dev->pdev, 2);
*mappable_end = pci_resource_len(dev->pdev, 2);
if (!pci_set_dma_mask(dev->pdev, DMA_BIT_MASK(39)))
pci_set_consistent_dma_mask(dev->pdev, DMA_BIT_MASK(39));
pci_read_config_word(dev->pdev, SNB_GMCH_CTRL, &snb_gmch_ctl);
*stolen = gen8_get_stolen_size(snb_gmch_ctl);
gtt_size = gen8_get_total_gtt_size(snb_gmch_ctl);
*gtt_total = (gtt_size / sizeof(gen8_gtt_pte_t)) << PAGE_SHIFT;
gen8_setup_private_ppat(dev_priv);
ret = ggtt_probe_common(dev, gtt_size);
dev_priv->gtt.base.clear_range = gen8_ggtt_clear_range;
dev_priv->gtt.base.insert_entries = gen8_ggtt_insert_entries;
return ret;
}
static int gen6_gmch_probe(struct drm_device *dev,
size_t *gtt_total,
size_t *stolen,
phys_addr_t *mappable_base,
unsigned long *mappable_end)
drm/i915: Stop using AGP layer for GEN6+ As a quick hack we make the old intel_gtt structure mutable so we can fool a bunch of the existing code which depends on elements in that data structure. We can/should try to remove this in a subsequent patch. This should preserve the old gtt init behavior which upon writing these patches seems incorrect. The next patch will fix these things. The one exception is VLV which doesn't have the preserved flush control write behavior. Since we want to do that for all GEN6+ stuff, we'll handle that in a later patch. Mainstream VLV support doesn't actually exist yet anyway. v2: Update the comment to remove the "voodoo" Check that the last pte written matches what we readback v3: actually kill cache_level_to_agp_type since most of the flags will disappear in an upcoming patch v4: v3 was actually not what we wanted (Daniel) Make the ggtt bind assertions better and stricter (Chris) Fix some uncaught errors at gtt init (Chris) Some other random stuff that Chris wanted v5: check for i==0 in gen6_ggtt_bind_object to shut up gcc (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by [v4]: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Make the cache_level -> agp_flags conversion for pre-gen6 a tad more robust by mapping everything != CACHE_NONE to the cached agp flag - we have a 1:1 uncached mapping, but different modes of cacheable (at least on later generations). Suggested by Chris Wilson.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-04 17:21:27 +00:00
{
struct drm_i915_private *dev_priv = dev->dev_private;
unsigned int gtt_size;
drm/i915: Stop using AGP layer for GEN6+ As a quick hack we make the old intel_gtt structure mutable so we can fool a bunch of the existing code which depends on elements in that data structure. We can/should try to remove this in a subsequent patch. This should preserve the old gtt init behavior which upon writing these patches seems incorrect. The next patch will fix these things. The one exception is VLV which doesn't have the preserved flush control write behavior. Since we want to do that for all GEN6+ stuff, we'll handle that in a later patch. Mainstream VLV support doesn't actually exist yet anyway. v2: Update the comment to remove the "voodoo" Check that the last pte written matches what we readback v3: actually kill cache_level_to_agp_type since most of the flags will disappear in an upcoming patch v4: v3 was actually not what we wanted (Daniel) Make the ggtt bind assertions better and stricter (Chris) Fix some uncaught errors at gtt init (Chris) Some other random stuff that Chris wanted v5: check for i==0 in gen6_ggtt_bind_object to shut up gcc (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by [v4]: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Make the cache_level -> agp_flags conversion for pre-gen6 a tad more robust by mapping everything != CACHE_NONE to the cached agp flag - we have a 1:1 uncached mapping, but different modes of cacheable (at least on later generations). Suggested by Chris Wilson.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-04 17:21:27 +00:00
u16 snb_gmch_ctl;
int ret;
*mappable_base = pci_resource_start(dev->pdev, 2);
*mappable_end = pci_resource_len(dev->pdev, 2);
/* 64/512MB is the current min/max we actually know of, but this is just
* a coarse sanity check.
drm/i915: Stop using AGP layer for GEN6+ As a quick hack we make the old intel_gtt structure mutable so we can fool a bunch of the existing code which depends on elements in that data structure. We can/should try to remove this in a subsequent patch. This should preserve the old gtt init behavior which upon writing these patches seems incorrect. The next patch will fix these things. The one exception is VLV which doesn't have the preserved flush control write behavior. Since we want to do that for all GEN6+ stuff, we'll handle that in a later patch. Mainstream VLV support doesn't actually exist yet anyway. v2: Update the comment to remove the "voodoo" Check that the last pte written matches what we readback v3: actually kill cache_level_to_agp_type since most of the flags will disappear in an upcoming patch v4: v3 was actually not what we wanted (Daniel) Make the ggtt bind assertions better and stricter (Chris) Fix some uncaught errors at gtt init (Chris) Some other random stuff that Chris wanted v5: check for i==0 in gen6_ggtt_bind_object to shut up gcc (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by [v4]: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Make the cache_level -> agp_flags conversion for pre-gen6 a tad more robust by mapping everything != CACHE_NONE to the cached agp flag - we have a 1:1 uncached mapping, but different modes of cacheable (at least on later generations). Suggested by Chris Wilson.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-04 17:21:27 +00:00
*/
if ((*mappable_end < (64<<20) || (*mappable_end > (512<<20)))) {
DRM_ERROR("Unknown GMADR size (%lx)\n",
dev_priv->gtt.mappable_end);
return -ENXIO;
drm/i915: Stop using AGP layer for GEN6+ As a quick hack we make the old intel_gtt structure mutable so we can fool a bunch of the existing code which depends on elements in that data structure. We can/should try to remove this in a subsequent patch. This should preserve the old gtt init behavior which upon writing these patches seems incorrect. The next patch will fix these things. The one exception is VLV which doesn't have the preserved flush control write behavior. Since we want to do that for all GEN6+ stuff, we'll handle that in a later patch. Mainstream VLV support doesn't actually exist yet anyway. v2: Update the comment to remove the "voodoo" Check that the last pte written matches what we readback v3: actually kill cache_level_to_agp_type since most of the flags will disappear in an upcoming patch v4: v3 was actually not what we wanted (Daniel) Make the ggtt bind assertions better and stricter (Chris) Fix some uncaught errors at gtt init (Chris) Some other random stuff that Chris wanted v5: check for i==0 in gen6_ggtt_bind_object to shut up gcc (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by [v4]: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Make the cache_level -> agp_flags conversion for pre-gen6 a tad more robust by mapping everything != CACHE_NONE to the cached agp flag - we have a 1:1 uncached mapping, but different modes of cacheable (at least on later generations). Suggested by Chris Wilson.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-04 17:21:27 +00:00
}
if (!pci_set_dma_mask(dev->pdev, DMA_BIT_MASK(40)))
pci_set_consistent_dma_mask(dev->pdev, DMA_BIT_MASK(40));
pci_read_config_word(dev->pdev, SNB_GMCH_CTRL, &snb_gmch_ctl);
Revert "drm/i915: Calculate correct stolen size for GEN7+" This reverts commit 03752f5b7b77b95d83479885040950fba1250850. This revert requires a bit of explanation on how I understand things work. Internally the architects/designers decide how the stolen encoding works. We put it in a doc. BIOS writers take these docs and implement it. Driver writers read the doc too, and read the value left by the BIOS writers, and then we make magic. The failing here is that in the docs we had[1] contained two different definitions for this register for Gen7. (We have both a PCI register, and an MMIO, and each of these were different). At the time [2] of 03752f5, we asked the architects what the correct value should be; but that doesn't match the reality (BIOS) unfortunately. So on all machines I can get my hands on, this revert is the right thing to do. I've also worked with the product group to confirm that they agree this revert is what we should do. People using HW made my "people" who both write their own BIOS, and have access to our docs (Apple?). Investigations are still ongoing about whether we need to add a list of machines needing special handling, but this patch should be the right thing for pretty much everyone. [1] The docs are still wrong on this one. Now instead of two registers with two definitions, we have one register with BOTH definitions, progress? [2] The open source PRMs have the "wrong" definitions in chapter Volume 1 part6, section 1.1.12. This digging was inspired by Paulo. Cc: Paulo Zanoni <przanoni@gmail.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: Augment the patch saying that it's still a bit unclear whether there are any machines out there with "wrong" firmware and whether we need to add a list to handle them specially.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-01 18:00:34 +00:00
*stolen = gen6_get_stolen_size(snb_gmch_ctl);
gtt_size = gen6_get_total_gtt_size(snb_gmch_ctl);
*gtt_total = (gtt_size / sizeof(gen6_gtt_pte_t)) << PAGE_SHIFT;
drm/i915: Stop using AGP layer for GEN6+ As a quick hack we make the old intel_gtt structure mutable so we can fool a bunch of the existing code which depends on elements in that data structure. We can/should try to remove this in a subsequent patch. This should preserve the old gtt init behavior which upon writing these patches seems incorrect. The next patch will fix these things. The one exception is VLV which doesn't have the preserved flush control write behavior. Since we want to do that for all GEN6+ stuff, we'll handle that in a later patch. Mainstream VLV support doesn't actually exist yet anyway. v2: Update the comment to remove the "voodoo" Check that the last pte written matches what we readback v3: actually kill cache_level_to_agp_type since most of the flags will disappear in an upcoming patch v4: v3 was actually not what we wanted (Daniel) Make the ggtt bind assertions better and stricter (Chris) Fix some uncaught errors at gtt init (Chris) Some other random stuff that Chris wanted v5: check for i==0 in gen6_ggtt_bind_object to shut up gcc (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by [v4]: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Make the cache_level -> agp_flags conversion for pre-gen6 a tad more robust by mapping everything != CACHE_NONE to the cached agp flag - we have a 1:1 uncached mapping, but different modes of cacheable (at least on later generations). Suggested by Chris Wilson.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-04 17:21:27 +00:00
ret = ggtt_probe_common(dev, gtt_size);
drm/i915: Stop using AGP layer for GEN6+ As a quick hack we make the old intel_gtt structure mutable so we can fool a bunch of the existing code which depends on elements in that data structure. We can/should try to remove this in a subsequent patch. This should preserve the old gtt init behavior which upon writing these patches seems incorrect. The next patch will fix these things. The one exception is VLV which doesn't have the preserved flush control write behavior. Since we want to do that for all GEN6+ stuff, we'll handle that in a later patch. Mainstream VLV support doesn't actually exist yet anyway. v2: Update the comment to remove the "voodoo" Check that the last pte written matches what we readback v3: actually kill cache_level_to_agp_type since most of the flags will disappear in an upcoming patch v4: v3 was actually not what we wanted (Daniel) Make the ggtt bind assertions better and stricter (Chris) Fix some uncaught errors at gtt init (Chris) Some other random stuff that Chris wanted v5: check for i==0 in gen6_ggtt_bind_object to shut up gcc (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by [v4]: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Make the cache_level -> agp_flags conversion for pre-gen6 a tad more robust by mapping everything != CACHE_NONE to the cached agp flag - we have a 1:1 uncached mapping, but different modes of cacheable (at least on later generations). Suggested by Chris Wilson.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-04 17:21:27 +00:00
dev_priv->gtt.base.clear_range = gen6_ggtt_clear_range;
dev_priv->gtt.base.insert_entries = gen6_ggtt_insert_entries;
drm/i915: Stop using AGP layer for GEN6+ As a quick hack we make the old intel_gtt structure mutable so we can fool a bunch of the existing code which depends on elements in that data structure. We can/should try to remove this in a subsequent patch. This should preserve the old gtt init behavior which upon writing these patches seems incorrect. The next patch will fix these things. The one exception is VLV which doesn't have the preserved flush control write behavior. Since we want to do that for all GEN6+ stuff, we'll handle that in a later patch. Mainstream VLV support doesn't actually exist yet anyway. v2: Update the comment to remove the "voodoo" Check that the last pte written matches what we readback v3: actually kill cache_level_to_agp_type since most of the flags will disappear in an upcoming patch v4: v3 was actually not what we wanted (Daniel) Make the ggtt bind assertions better and stricter (Chris) Fix some uncaught errors at gtt init (Chris) Some other random stuff that Chris wanted v5: check for i==0 in gen6_ggtt_bind_object to shut up gcc (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by [v4]: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Make the cache_level -> agp_flags conversion for pre-gen6 a tad more robust by mapping everything != CACHE_NONE to the cached agp flag - we have a 1:1 uncached mapping, but different modes of cacheable (at least on later generations). Suggested by Chris Wilson.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-04 17:21:27 +00:00
return ret;
}
static void gen6_gmch_remove(struct i915_address_space *vm)
drm/i915: Stop using AGP layer for GEN6+ As a quick hack we make the old intel_gtt structure mutable so we can fool a bunch of the existing code which depends on elements in that data structure. We can/should try to remove this in a subsequent patch. This should preserve the old gtt init behavior which upon writing these patches seems incorrect. The next patch will fix these things. The one exception is VLV which doesn't have the preserved flush control write behavior. Since we want to do that for all GEN6+ stuff, we'll handle that in a later patch. Mainstream VLV support doesn't actually exist yet anyway. v2: Update the comment to remove the "voodoo" Check that the last pte written matches what we readback v3: actually kill cache_level_to_agp_type since most of the flags will disappear in an upcoming patch v4: v3 was actually not what we wanted (Daniel) Make the ggtt bind assertions better and stricter (Chris) Fix some uncaught errors at gtt init (Chris) Some other random stuff that Chris wanted v5: check for i==0 in gen6_ggtt_bind_object to shut up gcc (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by [v4]: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Make the cache_level -> agp_flags conversion for pre-gen6 a tad more robust by mapping everything != CACHE_NONE to the cached agp flag - we have a 1:1 uncached mapping, but different modes of cacheable (at least on later generations). Suggested by Chris Wilson.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-04 17:21:27 +00:00
{
struct i915_gtt *gtt = container_of(vm, struct i915_gtt, base);
drm_mm_takedown(&vm->mm);
iounmap(gtt->gsm);
teardown_scratch_page(vm->dev);
}
static int i915_gmch_probe(struct drm_device *dev,
size_t *gtt_total,
size_t *stolen,
phys_addr_t *mappable_base,
unsigned long *mappable_end)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int ret;
ret = intel_gmch_probe(dev_priv->bridge_dev, dev_priv->dev->pdev, NULL);
if (!ret) {
DRM_ERROR("failed to set up gmch\n");
return -EIO;
}
intel_gtt_get(gtt_total, stolen, mappable_base, mappable_end);
dev_priv->gtt.do_idle_maps = needs_idle_maps(dev_priv->dev);
dev_priv->gtt.base.clear_range = i915_ggtt_clear_range;
return 0;
}
static void i915_gmch_remove(struct i915_address_space *vm)
{
intel_gmch_remove();
}
int i915_gem_gtt_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct i915_gtt *gtt = &dev_priv->gtt;
int ret;
if (INTEL_INFO(dev)->gen <= 5) {
gtt->gtt_probe = i915_gmch_probe;
gtt->base.cleanup = i915_gmch_remove;
} else if (INTEL_INFO(dev)->gen < 8) {
gtt->gtt_probe = gen6_gmch_probe;
gtt->base.cleanup = gen6_gmch_remove;
if (IS_HASWELL(dev) && dev_priv->ellc_size)
gtt->base.pte_encode = iris_pte_encode;
else if (IS_HASWELL(dev))
gtt->base.pte_encode = hsw_pte_encode;
else if (IS_VALLEYVIEW(dev))
gtt->base.pte_encode = byt_pte_encode;
else if (INTEL_INFO(dev)->gen >= 7)
gtt->base.pte_encode = ivb_pte_encode;
else
gtt->base.pte_encode = snb_pte_encode;
} else {
dev_priv->gtt.gtt_probe = gen8_gmch_probe;
dev_priv->gtt.base.cleanup = gen6_gmch_remove;
}
ret = gtt->gtt_probe(dev, &gtt->base.total, &gtt->stolen_size,
&gtt->mappable_base, &gtt->mappable_end);
if (ret)
return ret;
gtt->base.dev = dev;
/* GMADR is the PCI mmio aperture into the global GTT. */
DRM_INFO("Memory usable by graphics device = %zdM\n",
gtt->base.total >> 20);
DRM_DEBUG_DRIVER("GMADR size = %ldM\n", gtt->mappable_end >> 20);
DRM_DEBUG_DRIVER("GTT stolen size = %zdM\n", gtt->stolen_size >> 20);
return 0;
}
drm/i915: Create bind/unbind abstraction for VMAs To sum up what goes on here, we abstract the vma binding, similarly to the previous object binding. This helps for distinguishing legacy binding, versus modern binding. To keep the code churn as minimal as possible, I am leaving in insert_entries(). It serves as the per platform pte writing basically. bind_vma and insert_entries do share a lot of similarities, and I did have designs to combine the two, but as mentioned already... too much churn in an already massive patchset. What follows are the 3 commits which existed discretely in the original submissions. Upon rebasing on Broadwell support, it became clear that separation was not good, and only made for more error prone code. Below are the 3 commit messages with all their history. drm/i915: Add bind/unbind object functions to VMA drm/i915: Use the new vm [un]bind functions drm/i915: reduce vm->insert_entries() usage drm/i915: Add bind/unbind object functions to VMA As we plumb the code with more VM information, it has become more obvious that the easiest way to deal with bind and unbind is to simply put the function pointers in the vm, and let those choose the correct way to handle the page table updates. This change allows many places in the code to simply be vm->bind, and not have to worry about distinguishing PPGTT vs GGTT. Notice that this patch has no impact on functionality. I've decided to save the actual change until the next patch because I think it's easier to review that way. I'm happy to squash the two, or let Daniel do it on merge. v2: Make ggtt handle the quirky aliasing ppgtt Add flags to bind object to support above Don't ever call bind/unbind directly for PPGTT until we have real, full PPGTT (use NULLs to assert this) Make sure we rebind the ggtt if there already is a ggtt binding. This happens on set cache levels. Use VMA for bind/unbind (Daniel, Ben) v3: Reorganize ggtt_vma_bind to be more concise and easier to read (Ville). Change logic in unbind to only unbind ggtt when there is a global mapping, and to remove a redundant check if the aliasing ppgtt exists. v4: Make the bind function a bit smarter about the cache levels to avoid unnecessary multiple remaps. "I accept it is a wart, I think unifying the pin_vma / bind_vma could be unified later" (Chris) Removed the git notes, and put version info here. (Daniel) v5: Update the comment to not suck (Chris) v6: Move bind/unbind to the VMA. It makes more sense in the VMA structure (always has, but I was previously lazy). With this change, it will allow us to keep a distinct insert_entries. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: Use the new vm [un]bind functions Building on the last patch which created the new function pointers in the VM for bind/unbind, here we actually put those new function pointers to use. Split out as a separate patch to aid in review. I'm fine with squashing into the previous patch if people request it. v2: Updated to address the smart ggtt which can do aliasing as needed Make sure we bind to global gtt when mappable and fenceable. I thought we could get away without this initialy, but we cannot. v3: Make the global GTT binding explicitly use the ggtt VM for bind_vma(). While at it, use the new ggtt_vma helper (Chris) At this point the original mailing list thread diverges. ie. v4^: use target_obj instead of obj for gen6 relocate_entry vma->bind_vma() can be called safely during pin. So simply do that instead of the complicated conditionals. Don't restore PPGTT bound objects on resume path Bug fix in resume path for globally bound Bos Properly handle secure dispatch Rebased on vma bind/unbind conversion Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: reduce vm->insert_entries() usage FKA: drm/i915: eliminate vm->insert_entries() With bind/unbind function pointers in place, we no longer need insert_entries. We could, and want, to remove clear_range, however it's not totally easy at this point. Since it's used in a couple of place still that don't only deal in objects: setup, ppgtt init, and restore gtt mappings. v2: Don't actually remove insert_entries, just limit its usage. It will be useful when we introduce gen8. It will always be called from the vma bind/unbind. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-06 22:10:56 +00:00
static struct i915_vma *__i915_gem_vma_create(struct drm_i915_gem_object *obj,
struct i915_address_space *vm)
{
struct i915_vma *vma = kzalloc(sizeof(*vma), GFP_KERNEL);
if (vma == NULL)
return ERR_PTR(-ENOMEM);
INIT_LIST_HEAD(&vma->vma_link);
INIT_LIST_HEAD(&vma->mm_list);
INIT_LIST_HEAD(&vma->exec_list);
vma->vm = vm;
vma->obj = obj;
switch (INTEL_INFO(vm->dev)->gen) {
case 8:
case 7:
case 6:
vma->unbind_vma = ggtt_unbind_vma;
vma->bind_vma = ggtt_bind_vma;
break;
case 5:
case 4:
case 3:
case 2:
BUG_ON(!i915_is_ggtt(vm));
vma->unbind_vma = i915_ggtt_unbind_vma;
vma->bind_vma = i915_ggtt_bind_vma;
break;
default:
BUG();
}
/* Keep GGTT vmas first to make debug easier */
if (i915_is_ggtt(vm))
list_add(&vma->vma_link, &obj->vma_list);
else
list_add_tail(&vma->vma_link, &obj->vma_list);
return vma;
}
struct i915_vma *
i915_gem_obj_lookup_or_create_vma(struct drm_i915_gem_object *obj,
struct i915_address_space *vm)
{
struct i915_vma *vma;
vma = i915_gem_obj_to_vma(obj, vm);
if (!vma)
vma = __i915_gem_vma_create(obj, vm);
return vma;
}