linux/drivers/gpu/drm/i915/i915_drv.h

1534 lines
47 KiB
C
Raw Normal View History

/* i915_drv.h -- Private header for the I915 driver -*- linux-c -*-
*/
/*
*
* Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
* All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sub license, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* The above copyright notice and this permission notice (including the
* next paragraph) shall be included in all copies or substantial portions
* of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
* IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
* ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
* TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
* SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
*/
#ifndef _I915_DRV_H_
#define _I915_DRV_H_
#include "i915_reg.h"
#include "intel_bios.h"
#include "intel_ringbuffer.h"
#include <linux/io-mapping.h>
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
#include <drm/intel-gtt.h>
#include <linux/backlight.h>
#include <linux/intel-iommu.h>
#include <linux/kref.h>
/* General customization:
*/
#define DRIVER_AUTHOR "Tungsten Graphics, Inc."
#define DRIVER_NAME "i915"
#define DRIVER_DESC "Intel Graphics"
#define DRIVER_DATE "20080730"
enum pipe {
PIPE_A = 0,
PIPE_B,
PIPE_C,
I915_MAX_PIPES
};
#define pipe_name(p) ((p) + 'A')
enum plane {
PLANE_A = 0,
PLANE_B,
PLANE_C,
};
#define plane_name(p) ((p) + 'A')
enum port {
PORT_A = 0,
PORT_B,
PORT_C,
PORT_D,
PORT_E,
I915_MAX_PORTS
};
#define port_name(p) ((p) + 'A')
#define I915_GEM_GPU_DOMAINS (~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT))
#define for_each_pipe(p) for ((p) = 0; (p) < dev_priv->num_pipe; (p)++)
struct intel_pch_pll {
int refcount; /* count of number of CRTCs sharing this PLL */
int active; /* count of number of active CRTCs (i.e. DPMS on) */
bool on; /* is the PLL actually active? Disabled during modeset */
int pll_reg;
int fp0_reg;
int fp1_reg;
};
#define I915_NUM_PLLS 2
/* Interface history:
*
* 1.1: Original.
* 1.2: Add Power Management
* 1.3: Add vblank support
* 1.4: Fix cmdbuffer path, add heap destroy
* 1.5: Add vblank pipe configuration
* 1.6: - New ioctl for scheduling buffer swaps on vertical blank
* - Support vertical blank on secondary display pipe
*/
#define DRIVER_MAJOR 1
#define DRIVER_MINOR 6
#define DRIVER_PATCHLEVEL 0
#define WATCH_COHERENCY 0
#define WATCH_LISTS 0
#define I915_GEM_PHYS_CURSOR_0 1
#define I915_GEM_PHYS_CURSOR_1 2
#define I915_GEM_PHYS_OVERLAY_REGS 3
#define I915_MAX_PHYS_OBJECT (I915_GEM_PHYS_OVERLAY_REGS)
struct drm_i915_gem_phys_object {
int id;
struct page **page_list;
drm_dma_handle_t *handle;
struct drm_i915_gem_object *cur_obj;
};
struct mem_block {
struct mem_block *next;
struct mem_block *prev;
int start;
int size;
struct drm_file *file_priv; /* NULL: free, -1: heap, other: real files */
};
struct opregion_header;
struct opregion_acpi;
struct opregion_swsci;
struct opregion_asle;
struct drm_i915_private;
struct intel_opregion {
struct opregion_header __iomem *header;
struct opregion_acpi __iomem *acpi;
struct opregion_swsci __iomem *swsci;
struct opregion_asle __iomem *asle;
void __iomem *vbt;
u32 __iomem *lid_state;
};
#define OPREGION_SIZE (8*1024)
struct intel_overlay;
struct intel_overlay_error_state;
struct drm_i915_master_private {
drm_local_map_t *sarea;
struct _drm_i915_sarea *sarea_priv;
};
#define I915_FENCE_REG_NONE -1
#define I915_MAX_NUM_FENCES 16
/* 16 fences + sign bit for FENCE_REG_NONE */
#define I915_MAX_NUM_FENCE_BITS 5
struct drm_i915_fence_reg {
struct list_head lru_list;
struct drm_i915_gem_object *obj;
int pin_count;
};
struct sdvo_device_mapping {
u8 initialized;
u8 dvo_port;
u8 slave_addr;
u8 dvo_wiring;
u8 i2c_pin;
u8 ddc_pin;
};
struct intel_display_error_state;
struct drm_i915_error_state {
struct kref ref;
u32 eir;
u32 pgtbl_er;
u32 ier;
bool waiting[I915_NUM_RINGS];
u32 pipestat[I915_MAX_PIPES];
u32 tail[I915_NUM_RINGS];
u32 head[I915_NUM_RINGS];
u32 ipeir[I915_NUM_RINGS];
u32 ipehr[I915_NUM_RINGS];
u32 instdone[I915_NUM_RINGS];
u32 acthd[I915_NUM_RINGS];
u32 semaphore_mboxes[I915_NUM_RINGS][I915_NUM_RINGS - 1];
/* our own tracking of ring head and tail */
u32 cpu_ring_head[I915_NUM_RINGS];
u32 cpu_ring_tail[I915_NUM_RINGS];
u32 error; /* gen6+ */
u32 instpm[I915_NUM_RINGS];
u32 instps[I915_NUM_RINGS];
u32 instdone1;
u32 seqno[I915_NUM_RINGS];
u64 bbaddr;
u32 fault_reg[I915_NUM_RINGS];
u32 done_reg;
u32 faddr[I915_NUM_RINGS];
u64 fence[I915_MAX_NUM_FENCES];
struct timeval time;
struct drm_i915_error_ring {
struct drm_i915_error_object {
int page_count;
u32 gtt_offset;
u32 *pages[0];
} *ringbuffer, *batchbuffer;
struct drm_i915_error_request {
long jiffies;
u32 seqno;
u32 tail;
} *requests;
int num_requests;
} ring[I915_NUM_RINGS];
struct drm_i915_error_buffer {
u32 size;
u32 name;
u32 seqno;
u32 gtt_offset;
u32 read_domains;
u32 write_domain;
s32 fence_reg:I915_MAX_NUM_FENCE_BITS;
s32 pinned:2;
u32 tiling:2;
u32 dirty:1;
u32 purgeable:1;
s32 ring:4;
u32 cache_level:2;
} *active_bo, *pinned_bo;
u32 active_bo_count, pinned_bo_count;
struct intel_overlay_error_state *overlay;
struct intel_display_error_state *display;
};
struct drm_i915_display_funcs {
void (*dpms)(struct drm_crtc *crtc, int mode);
bool (*fbc_enabled)(struct drm_device *dev);
void (*enable_fbc)(struct drm_crtc *crtc, unsigned long interval);
void (*disable_fbc)(struct drm_device *dev);
int (*get_display_clock_speed)(struct drm_device *dev);
int (*get_fifo_size)(struct drm_device *dev, int plane);
void (*update_wm)(struct drm_device *dev);
drm/i915: add SNB and IVB video sprite support v6 The video sprites support various video surface formats natively and can handle scaling as well. So add support for them using the new DRM core sprite support functions. v2: use drm specific fourcc header and defines v3: address Daniel's comments: - don't take struct mutex around register access (only needed for regs in the GT power well) - don't hold struct mutex across vblank waits - fix up update_plane API (pass obj instead of GTT offset) - add interlaced defines for sprite regs - drop unnecessary 'reg' variables - comment double buffered reg flushing Also fix w/h confusion when writing the scaling reg. v4: more fixes, address more comments from Daniel, and include Hai's fix - prevent divide by zero in scaling calculation (Hai Lan) - update to Ville's new DRM_FORMAT_* types - fix sprite watermark handling (calc based on CRTC size, separate from normal display wm) - remove private refcounts now that the fb cleanups handles things v5: add linear surface support v6: remove color key clearing & setting from update_plane For this version, I tested DPMS since it came up in the last review; DPMS off/on works ok when a video player is working under X, but for power saving we'll probably want to do something smarter. I'll leave that for a separate patch on top. Likewise with the refcounting/fb layer handling, which are really separate cleanups. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-12-13 21:19:38 +00:00
void (*update_sprite_wm)(struct drm_device *dev, int pipe,
uint32_t sprite_width, int pixel_size);
void (*sanitize_pm)(struct drm_device *dev);
void (*update_linetime_wm)(struct drm_device *dev, int pipe,
struct drm_display_mode *mode);
int (*crtc_mode_set)(struct drm_crtc *crtc,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode,
int x, int y,
struct drm_framebuffer *old_fb);
void (*off)(struct drm_crtc *crtc);
drm/i915: pass ELD to HDMI/DP audio driver Add ELD support for Intel Eaglelake, IbexPeak/Ironlake, SandyBridge/CougarPoint and IvyBridge/PantherPoint chips. ELD (EDID-Like Data) describes to the HDMI/DP audio driver the audio capabilities of the plugged monitor. It's built and passed to audio driver in 2 steps: (1) at get_modes time, parse EDID and save ELD to drm_connector.eld[] (2) at mode_set time, write drm_connector.eld[] to the Transcoder's hw ELD buffer and set the ELD_valid bit to inform HDMI/DP audio driver This patch is tested OK on G45/HDMI, IbexPeak/HDMI and IvyBridge/HDMI+DP. Test scheme: plug in the HDMI/DP monitor, and run cat /proc/asound/card0/eld* to check if the monitor name, HDMI/DP type, etc. show up correctly. Minor imperfection: the GEN5_AUD_CNTL_ST/DIP_Port_Select field always reads 0 (reserved). Without knowing the port number, I worked it around by setting the ELD_valid bit for ALL the three ports. It's tested to not be a problem, because the audio driver will find invalid ELD data and hence rightfully abort, even when it sees the ELD_valid indicator. Thanks to Zhenyu and Pierre-Louis for a lot of valuable help and testing. CC: Zhao Yakui <yakui.zhao@intel.com> CC: Wang Zhenyu <zhenyu.z.wang@intel.com> CC: Jeremy Bush <contractfrombelow@gmail.com> CC: Christopher White <c.white@pulseforce.com> CC: Pierre-Louis Bossart <pierre-louis.bossart@intel.com> CC: Paul Menzel <paulepanter@users.sourceforge.net> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-09-05 06:25:34 +00:00
void (*write_eld)(struct drm_connector *connector,
struct drm_crtc *crtc);
void (*fdi_link_train)(struct drm_crtc *crtc);
void (*init_clock_gating)(struct drm_device *dev);
void (*init_pch_clock_gating)(struct drm_device *dev);
int (*queue_flip)(struct drm_device *dev, struct drm_crtc *crtc,
struct drm_framebuffer *fb,
struct drm_i915_gem_object *obj);
int (*update_plane)(struct drm_crtc *crtc, struct drm_framebuffer *fb,
int x, int y);
void (*force_wake_get)(struct drm_i915_private *dev_priv);
void (*force_wake_put)(struct drm_i915_private *dev_priv);
/* clock updates for mode set */
/* cursor updates */
/* render clock increase/decrease */
/* display clock increase/decrease */
/* pll clock increase/decrease */
};
struct intel_device_info {
u8 gen;
u8 is_mobile:1;
u8 is_i85x:1;
u8 is_i915g:1;
u8 is_i945gm:1;
u8 is_g33:1;
u8 need_gfx_hws:1;
u8 is_g4x:1;
u8 is_pineview:1;
u8 is_broadwater:1;
u8 is_crestline:1;
u8 is_ivybridge:1;
u8 is_valleyview:1;
u8 has_pch_split:1;
u8 is_haswell:1;
u8 has_fbc:1;
u8 has_pipe_cxsr:1;
u8 has_hotplug:1;
u8 cursor_needs_physical:1;
u8 has_overlay:1;
u8 overlay_needs_physical:1;
u8 supports_tv:1;
u8 has_bsd_ring:1;
u8 has_blt_ring:1;
u8 has_llc:1;
};
#define I915_PPGTT_PD_ENTRIES 512
#define I915_PPGTT_PT_ENTRIES 1024
struct i915_hw_ppgtt {
unsigned num_pd_entries;
struct page **pt_pages;
uint32_t pd_offset;
dma_addr_t *pt_dma_addr;
dma_addr_t scratch_page_dma_addr;
};
enum no_fbc_reason {
FBC_NO_OUTPUT, /* no outputs enabled to compress */
FBC_STOLEN_TOO_SMALL, /* not enough space to hold compressed buffers */
FBC_UNSUPPORTED_MODE, /* interlace or doublescanned mode */
FBC_MODE_TOO_LARGE, /* mode too large for compression */
FBC_BAD_PLANE, /* fbc not supported on plane */
FBC_NOT_TILED, /* buffer not tiled */
FBC_MULTIPLE_PIPES, /* more than one pipe active */
FBC_MODULE_PARAM,
};
enum intel_pch {
PCH_IBX, /* Ibexpeak PCH */
PCH_CPT, /* Cougarpoint PCH */
PCH_LPT, /* Lynxpoint PCH */
};
#define QUIRK_PIPEA_FORCE (1<<0)
#define QUIRK_LVDS_SSC_DISABLE (1<<1)
#define QUIRK_INVERT_BRIGHTNESS (1<<2)
struct intel_fbdev;
struct intel_fbc_work;
struct intel_gmbus {
struct i2c_adapter adapter;
bool force_bit;
u32 reg0;
u32 gpio_reg;
struct i2c_algo_bit_data bit_algo;
struct drm_i915_private *dev_priv;
};
typedef struct drm_i915_private {
struct drm_device *dev;
const struct intel_device_info *info;
int relative_constants_mode;
void __iomem *regs;
/** gt_fifo_count and the subsequent register write are synchronized
* with dev->struct_mutex. */
unsigned gt_fifo_count;
/** forcewake_count is protected by gt_lock */
unsigned forcewake_count;
/** gt_lock is also taken in irq contexts. */
struct spinlock gt_lock;
struct intel_gmbus gmbus[GMBUS_NUM_PORTS];
/** gmbus_mutex protects against concurrent usage of the single hw gmbus
* controller on different i2c buses. */
struct mutex gmbus_mutex;
/**
* Base address of the gmbus and gpio block.
*/
uint32_t gpio_mmio_base;
struct pci_dev *bridge_dev;
struct intel_ring_buffer ring[I915_NUM_RINGS];
uint32_t next_seqno;
drm_dma_handle_t *status_page_dmah;
uint32_t counter;
struct drm_i915_gem_object *pwrctx;
struct drm_i915_gem_object *renderctx;
struct resource mch_res;
unsigned int cpp;
int back_offset;
int front_offset;
int current_page;
int page_flipping;
atomic_t irq_received;
/* protects the irq masks */
spinlock_t irq_lock;
/* DPIO indirect register protection */
spinlock_t dpio_lock;
/** Cached value of IMR to avoid reads in updating the bitfield */
u32 pipestat[2];
u32 irq_mask;
u32 gt_irq_mask;
u32 pch_irq_mask;
u32 hotplug_supported_mask;
struct work_struct hotplug_work;
unsigned int sr01, adpa, ppcr, dvob, dvoc, lvds;
int num_pipe;
int num_pch_pll;
/* For hangcheck timer */
#define DRM_I915_HANGCHECK_PERIOD 1500 /* in ms */
struct timer_list hangcheck_timer;
int hangcheck_count;
uint32_t last_acthd[I915_NUM_RINGS];
uint32_t last_instdone;
uint32_t last_instdone1;
2012-05-03 12:48:16 +00:00
unsigned int stop_rings;
unsigned long cfb_size;
unsigned int cfb_fb;
enum plane cfb_plane;
int cfb_y;
struct intel_fbc_work *fbc_work;
struct intel_opregion opregion;
/* overlay */
struct intel_overlay *overlay;
drm/i915: add SNB and IVB video sprite support v6 The video sprites support various video surface formats natively and can handle scaling as well. So add support for them using the new DRM core sprite support functions. v2: use drm specific fourcc header and defines v3: address Daniel's comments: - don't take struct mutex around register access (only needed for regs in the GT power well) - don't hold struct mutex across vblank waits - fix up update_plane API (pass obj instead of GTT offset) - add interlaced defines for sprite regs - drop unnecessary 'reg' variables - comment double buffered reg flushing Also fix w/h confusion when writing the scaling reg. v4: more fixes, address more comments from Daniel, and include Hai's fix - prevent divide by zero in scaling calculation (Hai Lan) - update to Ville's new DRM_FORMAT_* types - fix sprite watermark handling (calc based on CRTC size, separate from normal display wm) - remove private refcounts now that the fb cleanups handles things v5: add linear surface support v6: remove color key clearing & setting from update_plane For this version, I tested DPMS since it came up in the last review; DPMS off/on works ok when a video player is working under X, but for power saving we'll probably want to do something smarter. I'll leave that for a separate patch on top. Likewise with the refcounting/fb layer handling, which are really separate cleanups. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-12-13 21:19:38 +00:00
bool sprite_scaling_enabled;
/* LVDS info */
int backlight_level; /* restore backlight to this value */
bool backlight_enabled;
struct drm_display_mode *lfp_lvds_vbt_mode; /* if any */
struct drm_display_mode *sdvo_lvds_vbt_mode; /* if any */
/* Feature bits from the VBIOS */
unsigned int int_tv_support:1;
unsigned int lvds_dither:1;
unsigned int lvds_vbt:1;
unsigned int int_crt_support:1;
unsigned int lvds_use_ssc:1;
unsigned int display_clock_mode:1;
int lvds_ssc_freq;
unsigned int bios_lvds_val; /* initial [PCH_]LVDS reg val in VBIOS */
unsigned int lvds_val; /* used for checking LVDS channel mode */
struct {
int rate;
int lanes;
int preemphasis;
int vswing;
bool initialized;
bool support;
int bpp;
struct edp_power_seq pps;
} edp;
bool no_aux_handshake;
struct notifier_block lid_notifier;
int crt_ddc_pin;
struct drm_i915_fence_reg fence_regs[I915_MAX_NUM_FENCES]; /* assume 965 */
int fence_reg_start; /* 4 if userland hasn't ioctl'd us yet */
int num_fence_regs; /* 8 on pre-965, 16 otherwise */
unsigned int fsb_freq, mem_freq, is_ddr3;
spinlock_t error_lock;
/* Protected by dev->error_lock. */
struct drm_i915_error_state *first_error;
struct work_struct error_work;
struct completion error_completion;
struct workqueue_struct *wq;
/* Display functions */
struct drm_i915_display_funcs display;
/* PCH chipset type */
enum intel_pch pch_type;
unsigned long quirks;
/* Register state */
bool modeset_on_lid;
u8 saveLBB;
u32 saveDSPACNTR;
u32 saveDSPBCNTR;
u32 saveDSPARB;
Revert "drm/i915: Don't save/restore hardware status page address register" This reverts commit a7a75c8f70d6f6a2f16c9f627f938bbee2d32718. There are two different variations on how Intel hardware addresses the "Hardware Status Page". One as a location in physical memory and the other as an offset into the virtual memory of the GPU, used in more recent chipsets. (The HWS itself is a cacheable region of memory which the GPU can write to without requiring CPU synchronisation, used for updating various details of hardware state, such as the position of the GPU head in the ringbuffer, the last breadcrumb seqno, etc). These two types of addresses were updated in different locations of code - one inline with the ringbuffer initialisation, and the other during device initialisation. (The HWS page is logically associated with the rings, and there is one HWS page per ring.) During resume, only the ringbuffers were being re-initialised along with the virtual HWS page, leaving the older physical address HWS untouched. This then caused a hang on the older gen3/4 (915GM, 945GM, 965GM) the first time we tried to synchronise the GPU as the breadcrumbs were never being updated. Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: Jan Niehusmann <jan@gondor.com> Reported-by: Justin P. Mattock <justinmattock@gmail.com> Reported-and-tested-by: Michael "brot" Groh <brot@minad.de> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23 18:16:55 +00:00
u32 saveHWS;
u32 savePIPEACONF;
u32 savePIPEBCONF;
u32 savePIPEASRC;
u32 savePIPEBSRC;
u32 saveFPA0;
u32 saveFPA1;
u32 saveDPLL_A;
u32 saveDPLL_A_MD;
u32 saveHTOTAL_A;
u32 saveHBLANK_A;
u32 saveHSYNC_A;
u32 saveVTOTAL_A;
u32 saveVBLANK_A;
u32 saveVSYNC_A;
u32 saveBCLRPAT_A;
u32 saveTRANSACONF;
u32 saveTRANS_HTOTAL_A;
u32 saveTRANS_HBLANK_A;
u32 saveTRANS_HSYNC_A;
u32 saveTRANS_VTOTAL_A;
u32 saveTRANS_VBLANK_A;
u32 saveTRANS_VSYNC_A;
u32 savePIPEASTAT;
u32 saveDSPASTRIDE;
u32 saveDSPASIZE;
u32 saveDSPAPOS;
u32 saveDSPAADDR;
u32 saveDSPASURF;
u32 saveDSPATILEOFF;
u32 savePFIT_PGM_RATIOS;
u32 saveBLC_HIST_CTL;
u32 saveBLC_PWM_CTL;
u32 saveBLC_PWM_CTL2;
u32 saveBLC_CPU_PWM_CTL;
u32 saveBLC_CPU_PWM_CTL2;
u32 saveFPB0;
u32 saveFPB1;
u32 saveDPLL_B;
u32 saveDPLL_B_MD;
u32 saveHTOTAL_B;
u32 saveHBLANK_B;
u32 saveHSYNC_B;
u32 saveVTOTAL_B;
u32 saveVBLANK_B;
u32 saveVSYNC_B;
u32 saveBCLRPAT_B;
u32 saveTRANSBCONF;
u32 saveTRANS_HTOTAL_B;
u32 saveTRANS_HBLANK_B;
u32 saveTRANS_HSYNC_B;
u32 saveTRANS_VTOTAL_B;
u32 saveTRANS_VBLANK_B;
u32 saveTRANS_VSYNC_B;
u32 savePIPEBSTAT;
u32 saveDSPBSTRIDE;
u32 saveDSPBSIZE;
u32 saveDSPBPOS;
u32 saveDSPBADDR;
u32 saveDSPBSURF;
u32 saveDSPBTILEOFF;
u32 saveVGA0;
u32 saveVGA1;
u32 saveVGA_PD;
u32 saveVGACNTRL;
u32 saveADPA;
u32 saveLVDS;
u32 savePP_ON_DELAYS;
u32 savePP_OFF_DELAYS;
u32 saveDVOA;
u32 saveDVOB;
u32 saveDVOC;
u32 savePP_ON;
u32 savePP_OFF;
u32 savePP_CONTROL;
u32 savePP_DIVISOR;
u32 savePFIT_CONTROL;
u32 save_palette_a[256];
u32 save_palette_b[256];
u32 saveDPFC_CB_BASE;
u32 saveFBC_CFB_BASE;
u32 saveFBC_LL_BASE;
u32 saveFBC_CONTROL;
u32 saveFBC_CONTROL2;
u32 saveIER;
u32 saveIIR;
u32 saveIMR;
u32 saveDEIER;
u32 saveDEIMR;
u32 saveGTIER;
u32 saveGTIMR;
u32 saveFDI_RXA_IMR;
u32 saveFDI_RXB_IMR;
u32 saveCACHE_MODE_0;
u32 saveMI_ARB_STATE;
u32 saveSWF0[16];
u32 saveSWF1[16];
u32 saveSWF2[3];
u8 saveMSR;
u8 saveSR[8];
u8 saveGR[25];
u8 saveAR_INDEX;
u8 saveAR[21];
u8 saveDACMASK;
u8 saveCR[37];
uint64_t saveFENCE[I915_MAX_NUM_FENCES];
u32 saveCURACNTR;
u32 saveCURAPOS;
u32 saveCURABASE;
u32 saveCURBCNTR;
u32 saveCURBPOS;
u32 saveCURBBASE;
u32 saveCURSIZE;
u32 saveDP_B;
u32 saveDP_C;
u32 saveDP_D;
u32 savePIPEA_GMCH_DATA_M;
u32 savePIPEB_GMCH_DATA_M;
u32 savePIPEA_GMCH_DATA_N;
u32 savePIPEB_GMCH_DATA_N;
u32 savePIPEA_DP_LINK_M;
u32 savePIPEB_DP_LINK_M;
u32 savePIPEA_DP_LINK_N;
u32 savePIPEB_DP_LINK_N;
u32 saveFDI_RXA_CTL;
u32 saveFDI_TXA_CTL;
u32 saveFDI_RXB_CTL;
u32 saveFDI_TXB_CTL;
u32 savePFA_CTL_1;
u32 savePFB_CTL_1;
u32 savePFA_WIN_SZ;
u32 savePFB_WIN_SZ;
u32 savePFA_WIN_POS;
u32 savePFB_WIN_POS;
u32 savePCH_DREF_CONTROL;
u32 saveDISP_ARB_CTL;
u32 savePIPEA_DATA_M1;
u32 savePIPEA_DATA_N1;
u32 savePIPEA_LINK_M1;
u32 savePIPEA_LINK_N1;
u32 savePIPEB_DATA_M1;
u32 savePIPEB_DATA_N1;
u32 savePIPEB_LINK_M1;
u32 savePIPEB_LINK_N1;
u32 saveMCHBAR_RENDER_STANDBY;
u32 savePCH_PORT_HOTPLUG;
struct {
/** Bridge to intel-gtt-ko */
const struct intel_gtt *gtt;
/** Memory allocator for GTT stolen memory */
struct drm_mm stolen;
/** Memory allocator for GTT */
struct drm_mm gtt_space;
/** List of all objects in gtt_space. Used to restore gtt
* mappings on resume */
struct list_head gtt_list;
/** Usable portion of the GTT for GEM */
unsigned long gtt_start;
unsigned long gtt_mappable_end;
unsigned long gtt_end;
struct io_mapping *gtt_mapping;
int gtt_mtrr;
/** PPGTT used for aliasing the PPGTT with the GTT */
struct i915_hw_ppgtt *aliasing_ppgtt;
struct shrinker inactive_shrinker;
/**
* List of objects currently involved in rendering.
*
* Includes buffers having the contents of their GPU caches
* flushed, not necessarily primitives. last_rendering_seqno
* represents when the rendering involved will be completed.
*
* A reference is held on the buffer while on this list.
*/
struct list_head active_list;
/**
* List of objects which are not in the ringbuffer but which
* still have a write_domain which needs to be flushed before
* unbinding.
*
* last_rendering_seqno is 0 while an object is in this list.
*
* A reference is held on the buffer while on this list.
*/
struct list_head flushing_list;
/**
* LRU list of objects which are not in the ringbuffer and
* are ready to unbind, but are still in the GTT.
*
* last_rendering_seqno is 0 while an object is in this list.
*
* A reference is not held on the buffer while on this list,
* as merely being GTT-bound shouldn't prevent its being
* freed, and we'll pull it off the list in the free path.
*/
struct list_head inactive_list;
/** LRU list of objects with fence regs on them. */
struct list_head fence_list;
/**
* We leave the user IRQ off as much as possible,
* but this means that requests will finish and never
* be retired once the system goes idle. Set a timer to
* fire periodically while the ring is running. When it
* fires, go retire requests.
*/
struct delayed_work retire_work;
/**
* Are we in a non-interruptible section of code like
* modesetting?
*/
bool interruptible;
/**
* Flag if the X Server, and thus DRM, is not currently in
* control of the device.
*
* This is set between LeaveVT and EnterVT. It needs to be
* replaced with a semaphore. It also needs to be
* transitioned away from for kernel modesetting.
*/
int suspended;
/**
* Flag if the hardware appears to be wedged.
*
* This is set when attempts to idle the device timeout.
* It prevents command submission from occurring and makes
* every pending request fail
*/
atomic_t wedged;
/** Bit 6 swizzling required for X tiling */
uint32_t bit_6_swizzle_x;
/** Bit 6 swizzling required for Y tiling */
uint32_t bit_6_swizzle_y;
/* storage for physical objects */
struct drm_i915_gem_phys_object *phys_objs[I915_MAX_PHYS_OBJECT];
/* accounting, useful for userland debugging */
size_t gtt_total;
size_t mappable_gtt_total;
size_t object_memory;
u32 object_count;
} mm;
/* Old dri1 support infrastructure, beware the dragons ya fools entering
* here! */
struct {
unsigned allow_batchbuffer : 1;
u32 __iomem *gfx_hws_cpu_addr;
} dri1;
/* Kernel Modesetting */
struct sdvo_device_mapping sdvo_mappings[2];
/* indicate whether the LVDS_BORDER should be enabled or not */
unsigned int lvds_border_bits;
/* Panel fitter placement and size for Ironlake+ */
u32 pch_pf_pos, pch_pf_size;
struct drm_crtc *plane_to_crtc_mapping[3];
struct drm_crtc *pipe_to_crtc_mapping[3];
wait_queue_head_t pending_flip_queue;
struct intel_pch_pll pch_plls[I915_NUM_PLLS];
/* Reclocking support */
bool render_reclock_avail;
bool lvds_downclock_avail;
/* indicates the reduced downclock for LVDS*/
int lvds_downclock;
struct work_struct idle_work;
struct timer_list idle_timer;
bool busy;
u16 orig_clock;
int child_dev_num;
struct child_device_config *child_dev;
drm/i915: Update LVDS connector status when receiving ACPI LID event Dirk reports that nothing is displayed on LVDS when using ubuntu 9.1 after close/reopen the LID. And I also reproduce this issue on another laptop. After some tests and debug, it seems that it is related with that the LVDS status is not updated in time in course of suspend/resume. Now the LID state is used to check whether the LVDS is connected or disconnected. And when the LID is closed, it means that the LVDS is disconnected. When it is reopened, it means that the LVDS is connected. At the same time on some distributions the LID event is also used to put the system into suspend state. When the LID is closed, the system will enter the suspend state. When the LID is reopened, the system will be resumed. In such case when the LID is closed, user-space script will receive the LID notification event and detect the LVDS as disconnected. Then the system will enter the suspended state. When the LID is reopened, the system will be resumed. As the LVDS status is not updated in course of resume, it will cause that the LVDS connector is marked as unused and disabled. After the resume is finished,user-space script will try to configure the display mode for LVDS. But unfortunately as the LVDS status is not updated in time and it is still marked as disconnected, the LVDS and its corresponding CRTC will be disabled again in the function of drm_helper_disable_unused_functions after changing mode for LVDS. So we had better check and update the status of LVDS connector after receiving the LID notication event. Then after the system is resumed from suspended state, we can set the display mode for LVDS correctly. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Reported-by: Dirk Hohndel <hohndel@infradead.org> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> CC: stable@kernel.org Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-11 01:26:11 +00:00
struct drm_connector *int_lvds_connector;
struct drm_connector *int_edp_connector;
bool mchbar_need_disable;
struct work_struct rps_work;
spinlock_t rps_lock;
u32 pm_iir;
u8 cur_delay;
u8 min_delay;
u8 max_delay;
u8 fmax;
u8 fstart;
u64 last_count1;
unsigned long last_time1;
unsigned long chipset_power;
u64 last_count2;
struct timespec last_time2;
unsigned long gfx_power;
int c_m;
int r_t;
u8 corr;
spinlock_t *mchdev_lock;
enum no_fbc_reason no_fbc_reason;
struct drm_mm_node *compressed_fb;
struct drm_mm_node *compressed_llb;
unsigned long last_gpu_reset;
/* list of fbdev register on this device */
struct intel_fbdev *fbdev;
struct backlight_device *backlight;
struct drm_property *broadcast_rgb_property;
struct drm_property *force_audio_property;
} drm_i915_private_t;
/* Iterate over initialised rings */
#define for_each_ring(ring__, dev_priv__, i__) \
for ((i__) = 0; (i__) < I915_NUM_RINGS; (i__)++) \
if (((ring__) = &(dev_priv__)->ring[(i__)]), intel_ring_initialized((ring__)))
enum hdmi_force_audio {
HDMI_AUDIO_OFF_DVI = -2, /* no aux data for HDMI-DVI converter */
HDMI_AUDIO_OFF, /* force turn off HDMI audio */
HDMI_AUDIO_AUTO, /* trust EDID */
HDMI_AUDIO_ON, /* force turn on HDMI audio */
};
enum i915_cache_level {
I915_CACHE_NONE,
I915_CACHE_LLC,
I915_CACHE_LLC_MLC, /* gen6+ */
};
struct drm_i915_gem_object {
struct drm_gem_object base;
/** Current space allocated to this object in the GTT, if any. */
struct drm_mm_node *gtt_space;
struct list_head gtt_list;
/** This object's place on the active/flushing/inactive lists */
struct list_head ring_list;
struct list_head mm_list;
drm/i915: Update write_domains on active list after flush. Before changing the status of a buffer with a pending write we will await upon a new flush for that buffer. So we can take advantage of any flushes posted whilst the buffer is active and pending processing by the GPU, by clearing its write_domain and updating its last_rendering_seqno -- thus saving a potential flush in deep queues and improves flushing behaviour upon eviction for both GTT space and fences. In order to reduce the time spent searching the active list for matching write_domains, we move those to a separate list whose elements are the buffers belong to the active/flushing list with pending writes. Orignal patch by Chris Wilson <chris@chris-wilson.co.uk>, forward-ported by me. In addition to better performance, this also fixes a real bug. Before this changes, i915_gem_evict_everything didn't work as advertised. When the gpu was actually busy and processing request, the flush and subsequent wait would not move active and dirty buffers to the inactive list, but just to the flushing list. Which triggered the BUG_ON at the end of this function. With the more tight dirty buffer tracking, all currently busy and dirty buffers get moved to the inactive list by one i915_gem_flush operation. I've left the BUG_ON I've used to prove this in there. References: Bug 25911 - 2.10.0 causes kernel oops and system hangs http://bugs.freedesktop.org/show_bug.cgi?id=25911 Bug 26101 - [i915] xf86-video-intel 2.10.0 (and git) triggers kernel oops within seconds after login http://bugs.freedesktop.org/show_bug.cgi?id=26101 Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Adam Lantos <hege@playma.org> Cc: stable@kernel.org Signed-off-by: Eric Anholt <eric@anholt.net>
2010-02-07 15:20:18 +00:00
/** This object's place on GPU write list */
struct list_head gpu_write_list;
/** This object's place in the batchbuffer or on the eviction list */
struct list_head exec_list;
/**
* This is set if the object is on the active or flushing lists
* (has pending rendering), and is not set if it's on inactive (ready
* to be unbound).
*/
unsigned int active:1;
/**
* This is set if the object has been written to since last bound
* to the GTT
*/
unsigned int dirty:1;
/**
* This is set if the object has been written to since the last
* GPU flush.
*/
unsigned int pending_gpu_write:1;
/**
* Fence register bits (if any) for this object. Will be set
* as needed when mapped into the GTT.
* Protected by dev->struct_mutex.
*/
signed int fence_reg:I915_MAX_NUM_FENCE_BITS;
/**
* Advice: are the backing pages purgeable?
*/
unsigned int madv:2;
/**
* Current tiling mode for the object.
*/
unsigned int tiling_mode:2;
/**
* Whether the tiling parameters for the currently associated fence
* register have changed. Note that for the purposes of tracking
* tiling changes we also treat the unfenced register, the register
* slot that the object occupies whilst it executes a fenced
* command (such as BLT on gen2/3), as a "fence".
*/
unsigned int fence_dirty:1;
/** How many users have pinned this object in GTT space. The following
* users can each hold at most one reference: pwrite/pread, pin_ioctl
* (via user_pin_count), execbuffer (objects are not allowed multiple
* times for the same batchbuffer), and the framebuffer code. When
* switching/pageflipping, the framebuffer code has at most two buffers
* pinned per crtc.
*
* In the worst case this is 1 + 1 + 1 + 2*2 = 7. That would fit into 3
* bits with absolutely no headroom. So use 4 bits. */
unsigned int pin_count:4;
#define DRM_I915_GEM_OBJECT_MAX_PIN_COUNT 0xf
/**
* Is the object at the current location in the gtt mappable and
* fenceable? Used to avoid costly recalculations.
*/
unsigned int map_and_fenceable:1;
/**
* Whether the current gtt mapping needs to be mappable (and isn't just
* mappable by accident). Track pin and fault separate for a more
* accurate mappable working set.
*/
unsigned int fault_mappable:1;
unsigned int pin_mappable:1;
/*
* Is the GPU currently using a fence to access this buffer,
*/
unsigned int pending_fenced_gpu_access:1;
unsigned int fenced_gpu_access:1;
unsigned int cache_level:2;
unsigned int has_aliasing_ppgtt_mapping:1;
unsigned int has_global_gtt_mapping:1;
struct page **pages;
/**
* DMAR support
*/
struct scatterlist *sg_list;
int num_sg;
/**
* Used for performing relocations during execbuffer insertion.
*/
struct hlist_node exec_node;
unsigned long exec_handle;
struct drm_i915_gem_exec_object2 *exec_entry;
/**
* Current offset of the object in GTT space.
*
* This is the same as gtt_space->start
*/
uint32_t gtt_offset;
struct intel_ring_buffer *ring;
/** Breadcrumb of last rendering to the buffer. */
uint32_t last_rendering_seqno;
/** Breadcrumb of last fenced GPU access to the buffer. */
uint32_t last_fenced_seqno;
/** Current tiling stride for the object, if it's tiled. */
uint32_t stride;
/** Record of address bit 17 of each page at last unbind. */
unsigned long *bit_17;
/** User space pin count and filp owning the pin */
uint32_t user_pin_count;
struct drm_file *pin_filp;
/** for phy allocated objects */
struct drm_i915_gem_phys_object *phys_obj;
/**
* Number of crtcs where this object is currently the fb, but
* will be page flipped away on the next vblank. When it
* reaches 0, dev_priv->pending_flip_queue will be woken up.
*/
atomic_t pending_flip;
};
#define to_intel_bo(x) container_of(x, struct drm_i915_gem_object, base)
/**
* Request queue structure.
*
* The request queue allows us to note sequence numbers that have been emitted
* and may be associated with active buffers to be retired.
*
* By keeping this list, we can avoid having to do questionable
* sequence-number comparisons on buffer last_rendering_seqnos, and associate
* an emission time with seqnos for tracking how far ahead of the GPU we are.
*/
struct drm_i915_gem_request {
/** On Which ring this request was generated */
struct intel_ring_buffer *ring;
/** GEM sequence number associated with this request. */
uint32_t seqno;
drm/i915: Record the tail at each request and use it to estimate the head By recording the location of every request in the ringbuffer, we know that in order to retire the request the GPU must have finished reading it and so the GPU head is now beyond the tail of the request. We can therefore provide a conservative estimate of where the GPU is reading from in order to avoid having to read back the ring buffer registers when polling for space upon starting a new write into the ringbuffer. A secondary effect is that this allows us to convert intel_ring_buffer_wait() to use i915_wait_request() and so consolidate upon the single function to handle the complicated task of waiting upon the GPU. A necessary precaution is that we need to make that wait uninterruptible to match the existing conditions as all the callers of intel_ring_begin() have not been audited to handle ERESTARTSYS correctly. By using a conservative estimate for the head, and always processing all outstanding requests first, we prevent a race condition between using the estimate and direct reads of I915_RING_HEAD which could result in the value of the head going backwards, and the tail overflowing once again. We are also careful to mark any request that we skip over in order to free space in ring as consumed which provides a self-consistency check. Given sufficient abuse, such as a set of unthrottled GPU bound cairo-traces, avoiding the use of I915_RING_HEAD gives a 10-20% boost on Sandy Bridge (i5-2520m): firefox-paintball 18927ms -> 15646ms: 1.21x speedup firefox-fishtank 12563ms -> 11278ms: 1.11x speedup which is a mild consolation for the performance those traces achieved from exploiting the buggy autoreported head. v2: Add a few more comments and make request->tail a conservative estimate as suggested by Daniel Vetter. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: resolve conflicts with retirement defering and the lack of the autoreport head removal (that will go in through -fixes).] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-02-15 11:25:36 +00:00
/** Postion in the ringbuffer of the end of the request */
u32 tail;
/** Time at which this request was emitted, in jiffies. */
unsigned long emitted_jiffies;
/** global list entry for this request */
struct list_head list;
struct drm_i915_file_private *file_priv;
/** file_priv list entry for this request */
struct list_head client_list;
};
struct drm_i915_file_private {
struct {
struct spinlock lock;
struct list_head request_list;
} mm;
};
#define INTEL_INFO(dev) (((struct drm_i915_private *) (dev)->dev_private)->info)
#define IS_I830(dev) ((dev)->pci_device == 0x3577)
#define IS_845G(dev) ((dev)->pci_device == 0x2562)
#define IS_I85X(dev) (INTEL_INFO(dev)->is_i85x)
#define IS_I865G(dev) ((dev)->pci_device == 0x2572)
#define IS_I915G(dev) (INTEL_INFO(dev)->is_i915g)
#define IS_I915GM(dev) ((dev)->pci_device == 0x2592)
#define IS_I945G(dev) ((dev)->pci_device == 0x2772)
#define IS_I945GM(dev) (INTEL_INFO(dev)->is_i945gm)
#define IS_BROADWATER(dev) (INTEL_INFO(dev)->is_broadwater)
#define IS_CRESTLINE(dev) (INTEL_INFO(dev)->is_crestline)
#define IS_GM45(dev) ((dev)->pci_device == 0x2A42)
#define IS_G4X(dev) (INTEL_INFO(dev)->is_g4x)
#define IS_PINEVIEW_G(dev) ((dev)->pci_device == 0xa001)
#define IS_PINEVIEW_M(dev) ((dev)->pci_device == 0xa011)
#define IS_PINEVIEW(dev) (INTEL_INFO(dev)->is_pineview)
#define IS_G33(dev) (INTEL_INFO(dev)->is_g33)
#define IS_IRONLAKE_D(dev) ((dev)->pci_device == 0x0042)
#define IS_IRONLAKE_M(dev) ((dev)->pci_device == 0x0046)
#define IS_IVYBRIDGE(dev) (INTEL_INFO(dev)->is_ivybridge)
#define IS_VALLEYVIEW(dev) (INTEL_INFO(dev)->is_valleyview)
#define IS_HASWELL(dev) (INTEL_INFO(dev)->is_haswell)
#define IS_MOBILE(dev) (INTEL_INFO(dev)->is_mobile)
/*
* The genX designation typically refers to the render engine, so render
* capability related checks should use IS_GEN, while display and other checks
* have their own (e.g. HAS_PCH_SPLIT for ILK+ display, IS_foo for particular
* chips, etc.).
*/
#define IS_GEN2(dev) (INTEL_INFO(dev)->gen == 2)
#define IS_GEN3(dev) (INTEL_INFO(dev)->gen == 3)
#define IS_GEN4(dev) (INTEL_INFO(dev)->gen == 4)
#define IS_GEN5(dev) (INTEL_INFO(dev)->gen == 5)
#define IS_GEN6(dev) (INTEL_INFO(dev)->gen == 6)
#define IS_GEN7(dev) (INTEL_INFO(dev)->gen == 7)
#define HAS_BSD(dev) (INTEL_INFO(dev)->has_bsd_ring)
#define HAS_BLT(dev) (INTEL_INFO(dev)->has_blt_ring)
#define HAS_LLC(dev) (INTEL_INFO(dev)->has_llc)
#define I915_NEED_GFX_HWS(dev) (INTEL_INFO(dev)->need_gfx_hws)
#define HAS_ALIASING_PPGTT(dev) (INTEL_INFO(dev)->gen >=6)
#define HAS_OVERLAY(dev) (INTEL_INFO(dev)->has_overlay)
#define OVERLAY_NEEDS_PHYSICAL(dev) (INTEL_INFO(dev)->overlay_needs_physical)
/* With the 945 and later, Y tiling got adjusted so that it was 32 128-byte
* rows, which changed the alignment requirements and fence programming.
*/
#define HAS_128_BYTE_Y_TILING(dev) (!IS_GEN2(dev) && !(IS_I915G(dev) || \
IS_I915GM(dev)))
#define SUPPORTS_DIGITAL_OUTPUTS(dev) (!IS_GEN2(dev) && !IS_PINEVIEW(dev))
#define SUPPORTS_INTEGRATED_HDMI(dev) (IS_G4X(dev) || IS_GEN5(dev))
#define SUPPORTS_INTEGRATED_DP(dev) (IS_G4X(dev) || IS_GEN5(dev))
#define SUPPORTS_EDP(dev) (IS_IRONLAKE_M(dev))
#define SUPPORTS_TV(dev) (INTEL_INFO(dev)->supports_tv)
#define I915_HAS_HOTPLUG(dev) (INTEL_INFO(dev)->has_hotplug)
/* dsparb controlled by hw only */
#define DSPARB_HWCONTROL(dev) (IS_G4X(dev) || IS_IRONLAKE(dev))
#define HAS_FW_BLC(dev) (INTEL_INFO(dev)->gen > 2)
#define HAS_PIPE_CXSR(dev) (INTEL_INFO(dev)->has_pipe_cxsr)
#define I915_HAS_FBC(dev) (INTEL_INFO(dev)->has_fbc)
#define HAS_PCH_SPLIT(dev) (INTEL_INFO(dev)->has_pch_split)
#define HAS_PIPE_CONTROL(dev) (INTEL_INFO(dev)->gen >= 5)
#define INTEL_PCH_TYPE(dev) (((struct drm_i915_private *)(dev)->dev_private)->pch_type)
#define HAS_PCH_LPT(dev) (INTEL_PCH_TYPE(dev) == PCH_LPT)
#define HAS_PCH_CPT(dev) (INTEL_PCH_TYPE(dev) == PCH_CPT)
#define HAS_PCH_IBX(dev) (INTEL_PCH_TYPE(dev) == PCH_IBX)
#include "i915_trace.h"
/**
* RC6 is a special power stage which allows the GPU to enter an very
* low-voltage mode when idle, using down to 0V while at this stage. This
* stage is entered automatically when the GPU is idle when RC6 support is
* enabled, and as soon as new workload arises GPU wakes up automatically as well.
*
* There are different RC6 modes available in Intel GPU, which differentiate
* among each other with the latency required to enter and leave RC6 and
* voltage consumed by the GPU in different states.
*
* The combination of the following flags define which states GPU is allowed
* to enter, while RC6 is the normal RC6 state, RC6p is the deep RC6, and
* RC6pp is deepest RC6. Their support by hardware varies according to the
* GPU, BIOS, chipset and platform. RC6 is usually the safest one and the one
* which brings the most power savings; deeper states save more power, but
* require higher latency to switch to and wake up.
*/
#define INTEL_RC6_ENABLE (1<<0)
#define INTEL_RC6p_ENABLE (1<<1)
#define INTEL_RC6pp_ENABLE (1<<2)
extern struct drm_ioctl_desc i915_ioctls[];
extern int i915_max_ioctl;
extern unsigned int i915_fbpercrtc __always_unused;
extern int i915_panel_ignore_lid __read_mostly;
extern unsigned int i915_powersave __read_mostly;
extern int i915_semaphores __read_mostly;
extern unsigned int i915_lvds_downclock __read_mostly;
extern int i915_lvds_channel_mode __read_mostly;
extern int i915_panel_use_ssc __read_mostly;
extern int i915_vbt_sdvo_panel_type __read_mostly;
extern int i915_enable_rc6 __read_mostly;
extern int i915_enable_fbc __read_mostly;
extern bool i915_enable_hangcheck __read_mostly;
extern int i915_enable_ppgtt __read_mostly;
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
extern int i915_suspend(struct drm_device *dev, pm_message_t state);
extern int i915_resume(struct drm_device *dev);
extern int i915_master_create(struct drm_device *dev, struct drm_master *master);
extern void i915_master_destroy(struct drm_device *dev, struct drm_master *master);
/* i915_dma.c */
void i915_update_dri1_breadcrumb(struct drm_device *dev);
extern void i915_kernel_lost_context(struct drm_device * dev);
extern int i915_driver_load(struct drm_device *, unsigned long flags);
extern int i915_driver_unload(struct drm_device *);
extern int i915_driver_open(struct drm_device *dev, struct drm_file *file_priv);
extern void i915_driver_lastclose(struct drm_device * dev);
extern void i915_driver_preclose(struct drm_device *dev,
struct drm_file *file_priv);
extern void i915_driver_postclose(struct drm_device *dev,
struct drm_file *file_priv);
extern int i915_driver_device_is_agp(struct drm_device * dev);
#ifdef CONFIG_COMPAT
extern long i915_compat_ioctl(struct file *filp, unsigned int cmd,
unsigned long arg);
#endif
extern int i915_emit_box(struct drm_device *dev,
struct drm_clip_rect *box,
int DR1, int DR4);
extern int i915_reset(struct drm_device *dev);
extern unsigned long i915_chipset_val(struct drm_i915_private *dev_priv);
extern unsigned long i915_mch_val(struct drm_i915_private *dev_priv);
extern unsigned long i915_gfx_val(struct drm_i915_private *dev_priv);
extern void i915_update_gfx_val(struct drm_i915_private *dev_priv);
/* i915_irq.c */
void i915_hangcheck_elapsed(unsigned long data);
void i915_handle_error(struct drm_device *dev, bool wedged);
extern void intel_irq_init(struct drm_device *dev);
void i915_error_state_free(struct kref *error_ref);
void
i915_enable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask);
void
i915_disable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask);
void intel_enable_asle(struct drm_device *dev);
#ifdef CONFIG_DEBUG_FS
extern void i915_destroy_error_state(struct drm_device *dev);
#else
#define i915_destroy_error_state(x)
#endif
/* i915_gem.c */
int i915_gem_init_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
int i915_gem_create_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
int i915_gem_pread_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
int i915_gem_pwrite_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
int i915_gem_mmap_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
int i915_gem_mmap_gtt_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
int i915_gem_set_domain_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
int i915_gem_sw_finish_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
int i915_gem_execbuffer(struct drm_device *dev, void *data,
struct drm_file *file_priv);
int i915_gem_execbuffer2(struct drm_device *dev, void *data,
struct drm_file *file_priv);
int i915_gem_pin_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
int i915_gem_unpin_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
int i915_gem_busy_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
int i915_gem_throttle_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
int i915_gem_madvise_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
int i915_gem_entervt_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
int i915_gem_leavevt_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
int i915_gem_set_tiling(struct drm_device *dev, void *data,
struct drm_file *file_priv);
int i915_gem_get_tiling(struct drm_device *dev, void *data,
struct drm_file *file_priv);
int i915_gem_get_aperture_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
void i915_gem_load(struct drm_device *dev);
int i915_gem_init_object(struct drm_gem_object *obj);
int __must_check i915_gem_flush_ring(struct intel_ring_buffer *ring,
uint32_t invalidate_domains,
uint32_t flush_domains);
struct drm_i915_gem_object *i915_gem_alloc_object(struct drm_device *dev,
size_t size);
void i915_gem_free_object(struct drm_gem_object *obj);
int __must_check i915_gem_object_pin(struct drm_i915_gem_object *obj,
uint32_t alignment,
bool map_and_fenceable);
void i915_gem_object_unpin(struct drm_i915_gem_object *obj);
int __must_check i915_gem_object_unbind(struct drm_i915_gem_object *obj);
void i915_gem_release_mmap(struct drm_i915_gem_object *obj);
void i915_gem_lastclose(struct drm_device *dev);
int __must_check i915_mutex_lock_interruptible(struct drm_device *dev);
int __must_check i915_gem_object_wait_rendering(struct drm_i915_gem_object *obj);
int i915_gem_object_sync(struct drm_i915_gem_object *obj,
struct intel_ring_buffer *to);
void i915_gem_object_move_to_active(struct drm_i915_gem_object *obj,
struct intel_ring_buffer *ring,
u32 seqno);
int i915_gem_dumb_create(struct drm_file *file_priv,
struct drm_device *dev,
struct drm_mode_create_dumb *args);
int i915_gem_mmap_gtt(struct drm_file *file_priv, struct drm_device *dev,
uint32_t handle, uint64_t *offset);
int i915_gem_dumb_destroy(struct drm_file *file_priv, struct drm_device *dev,
uint32_t handle);
/**
* Returns true if seq1 is later than seq2.
*/
static inline bool
i915_seqno_passed(uint32_t seq1, uint32_t seq2)
{
return (int32_t)(seq1 - seq2) >= 0;
}
drm/i915: fixup seqno allocation logic for lazy_request Currently we reserve seqnos only when we emit the request to the ring (by bumping dev_priv->next_seqno), but start using it much earlier for ring->oustanding_lazy_request. When 2 threads compete for the gpu and run on two different rings (e.g. ddx on blitter vs. compositor) hilarity ensued, especially when we get constantly interrupted while reserving buffers. Breakage seems to have been introduced in commit 6f392d548658a17600da7faaf8a5df25ee5f01f6 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Sat Aug 7 11:01:22 2010 +0100 drm/i915: Use a common seqno for all rings. This patch fixes up the seqno reservation logic by moving it into i915_gem_next_request_seqno. The ring->add_request functions now superflously still return the new seqno through a pointer, that will be refactored in the next patch. Note that with this change we now unconditionally allocate a seqno, even when ->add_request might fail because the rings are full and the gpu died. But this does not open up a new can of worms because we can already leave behind an outstanding_request_seqno if e.g. the caller gets interrupted with a signal while stalling for the gpu in the eviciton paths. And with the bugfix we only ever have one seqno allocated per ring (and only that ring), so there are no ordering issues with multiple outstanding seqnos on the same ring. v2: Keep i915_gem_get_seqno (but move it to i915_gem.c) to make it clear that we only have one seqno counter for all rings. Suggested by Chris Wilson. v3: As suggested by Chris Wilson use i915_gem_next_request_seqno instead of ring->oustanding_lazy_request to make the follow-up refactoring more clearly correct. Also improve the commit message with issues discussed on irc. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45181 Tested-by: Nicolas Kalkhof nkalkhof()at()web.de Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-01-25 15:32:49 +00:00
u32 i915_gem_next_request_seqno(struct intel_ring_buffer *ring);
int __must_check i915_gem_object_get_fence(struct drm_i915_gem_object *obj);
int __must_check i915_gem_object_put_fence(struct drm_i915_gem_object *obj);
static inline bool
i915_gem_object_pin_fence(struct drm_i915_gem_object *obj)
{
if (obj->fence_reg != I915_FENCE_REG_NONE) {
struct drm_i915_private *dev_priv = obj->base.dev->dev_private;
dev_priv->fence_regs[obj->fence_reg].pin_count++;
return true;
} else
return false;
}
static inline void
i915_gem_object_unpin_fence(struct drm_i915_gem_object *obj)
{
if (obj->fence_reg != I915_FENCE_REG_NONE) {
struct drm_i915_private *dev_priv = obj->base.dev->dev_private;
dev_priv->fence_regs[obj->fence_reg].pin_count--;
}
}
void i915_gem_retire_requests(struct drm_device *dev);
drm/i915: Record the tail at each request and use it to estimate the head By recording the location of every request in the ringbuffer, we know that in order to retire the request the GPU must have finished reading it and so the GPU head is now beyond the tail of the request. We can therefore provide a conservative estimate of where the GPU is reading from in order to avoid having to read back the ring buffer registers when polling for space upon starting a new write into the ringbuffer. A secondary effect is that this allows us to convert intel_ring_buffer_wait() to use i915_wait_request() and so consolidate upon the single function to handle the complicated task of waiting upon the GPU. A necessary precaution is that we need to make that wait uninterruptible to match the existing conditions as all the callers of intel_ring_begin() have not been audited to handle ERESTARTSYS correctly. By using a conservative estimate for the head, and always processing all outstanding requests first, we prevent a race condition between using the estimate and direct reads of I915_RING_HEAD which could result in the value of the head going backwards, and the tail overflowing once again. We are also careful to mark any request that we skip over in order to free space in ring as consumed which provides a self-consistency check. Given sufficient abuse, such as a set of unthrottled GPU bound cairo-traces, avoiding the use of I915_RING_HEAD gives a 10-20% boost on Sandy Bridge (i5-2520m): firefox-paintball 18927ms -> 15646ms: 1.21x speedup firefox-fishtank 12563ms -> 11278ms: 1.11x speedup which is a mild consolation for the performance those traces achieved from exploiting the buggy autoreported head. v2: Add a few more comments and make request->tail a conservative estimate as suggested by Daniel Vetter. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: resolve conflicts with retirement defering and the lack of the autoreport head removal (that will go in through -fixes).] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-02-15 11:25:36 +00:00
void i915_gem_retire_requests_ring(struct intel_ring_buffer *ring);
void i915_gem_reset(struct drm_device *dev);
void i915_gem_clflush_object(struct drm_i915_gem_object *obj);
int __must_check i915_gem_object_set_domain(struct drm_i915_gem_object *obj,
uint32_t read_domains,
uint32_t write_domain);
int __must_check i915_gem_object_finish_gpu(struct drm_i915_gem_object *obj);
int __must_check i915_gem_init(struct drm_device *dev);
int __must_check i915_gem_init_hw(struct drm_device *dev);
void i915_gem_init_swizzling(struct drm_device *dev);
void i915_gem_init_ppgtt(struct drm_device *dev);
void i915_gem_cleanup_ringbuffer(struct drm_device *dev);
int __must_check i915_gpu_idle(struct drm_device *dev);
int __must_check i915_gem_idle(struct drm_device *dev);
int __must_check i915_add_request(struct intel_ring_buffer *ring,
struct drm_file *file,
struct drm_i915_gem_request *request);
int __must_check i915_wait_request(struct intel_ring_buffer *ring,
uint32_t seqno);
int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf);
int __must_check
i915_gem_object_set_to_gtt_domain(struct drm_i915_gem_object *obj,
bool write);
int __must_check
i915_gem_object_set_to_cpu_domain(struct drm_i915_gem_object *obj, bool write);
int __must_check
i915_gem_object_pin_to_display_plane(struct drm_i915_gem_object *obj,
u32 alignment,
struct intel_ring_buffer *pipelined);
int i915_gem_attach_phys_object(struct drm_device *dev,
struct drm_i915_gem_object *obj,
int id,
int align);
void i915_gem_detach_phys_object(struct drm_device *dev,
struct drm_i915_gem_object *obj);
void i915_gem_free_all_phys_object(struct drm_device *dev);
void i915_gem_release(struct drm_device *dev, struct drm_file *file);
uint32_t
i915_gem_get_unfenced_gtt_alignment(struct drm_device *dev,
uint32_t size,
int tiling_mode);
int i915_gem_object_set_cache_level(struct drm_i915_gem_object *obj,
enum i915_cache_level cache_level);
/* i915_gem_gtt.c */
int __must_check i915_gem_init_aliasing_ppgtt(struct drm_device *dev);
void i915_gem_cleanup_aliasing_ppgtt(struct drm_device *dev);
void i915_ppgtt_bind_object(struct i915_hw_ppgtt *ppgtt,
struct drm_i915_gem_object *obj,
enum i915_cache_level cache_level);
void i915_ppgtt_unbind_object(struct i915_hw_ppgtt *ppgtt,
struct drm_i915_gem_object *obj);
void i915_gem_restore_gtt_mappings(struct drm_device *dev);
int __must_check i915_gem_gtt_prepare_object(struct drm_i915_gem_object *obj);
void i915_gem_gtt_bind_object(struct drm_i915_gem_object *obj,
enum i915_cache_level cache_level);
void i915_gem_gtt_unbind_object(struct drm_i915_gem_object *obj);
void i915_gem_gtt_finish_object(struct drm_i915_gem_object *obj);
void i915_gem_init_global_gtt(struct drm_device *dev,
unsigned long start,
unsigned long mappable_end,
unsigned long end);
/* i915_gem_evict.c */
int __must_check i915_gem_evict_something(struct drm_device *dev, int min_size,
unsigned alignment, bool mappable);
int i915_gem_evict_everything(struct drm_device *dev, bool purgeable_only);
/* i915_gem_stolen.c */
int i915_gem_init_stolen(struct drm_device *dev);
void i915_gem_cleanup_stolen(struct drm_device *dev);
/* i915_gem_tiling.c */
void i915_gem_detect_bit_6_swizzle(struct drm_device *dev);
void i915_gem_object_do_bit_17_swizzle(struct drm_i915_gem_object *obj);
void i915_gem_object_save_bit_17_swizzle(struct drm_i915_gem_object *obj);
/* i915_gem_debug.c */
void i915_gem_dump_object(struct drm_i915_gem_object *obj, int len,
const char *where, uint32_t mark);
#if WATCH_LISTS
int i915_verify_lists(struct drm_device *dev);
#else
#define i915_verify_lists(dev) 0
#endif
void i915_gem_object_check_coherency(struct drm_i915_gem_object *obj,
int handle);
void i915_gem_dump_object(struct drm_i915_gem_object *obj, int len,
const char *where, uint32_t mark);
/* i915_debugfs.c */
int i915_debugfs_init(struct drm_minor *minor);
void i915_debugfs_cleanup(struct drm_minor *minor);
/* i915_suspend.c */
extern int i915_save_state(struct drm_device *dev);
extern int i915_restore_state(struct drm_device *dev);
/* i915_suspend.c */
extern int i915_save_state(struct drm_device *dev);
extern int i915_restore_state(struct drm_device *dev);
drm/i915: rc6 in sysfs Merge rc6 information into the power group for our device. Until now the i915 driver has not had any sysfs entries (aside from the connector stuff enabled by drm core). Since it seems like we're likely to have more in the future I created a new file for sysfs stubs, as well as the rc6 sysfs functions which don't really belong elsewhere (perhaps i915_suspend, but most of the stuff is in intel_display,c). displays rc6 modes enabled (as a hex mask): cat /sys/class/drm/card0/power/rc6_enable displays #ms GPU has been in rc6 since boot: cat /sys/class/drm/card0/power/rc6_residency_ms displays #ms GPU has been in deep rc6 since boot: cat /sys/class/drm/card0/power/rc6p_residency_ms displays #ms GPU has been in deepest rc6 since boot: cat /sys/class/drm/card0/power/rc6pp_residency_ms Important note: I've seen on SNB that even when RC6 is *not* enabled the rc6 register seems to have a random value in it. I can only guess at the reason reason for this. Those writing tools that utilize this value need to be careful and probably want to scrutinize the value very carefully. v2: use common rc6 residency units to milliseconds for the other RC6 types v3: don't create sysfs files for GEN <= 5 add a rc6_enable to show a mask of enabled rc6 types use unmerge instead of remove for sysfs group squash intel_enable_rc6() extraction into this patch v4: rename sysfs files (Chris) CC: Chris Wilson <chris@chris-wilson.co.uk> CC: Daniel Vetter <daniel.vetter@ffwll.ch>f CC: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: squash in the 64bit division fix by Chris Wilson.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-04-11 04:17:01 +00:00
/* i915_sysfs.c */
void i915_setup_sysfs(struct drm_device *dev_priv);
void i915_teardown_sysfs(struct drm_device *dev_priv);
/* intel_i2c.c */
extern int intel_setup_gmbus(struct drm_device *dev);
extern void intel_teardown_gmbus(struct drm_device *dev);
extern inline bool intel_gmbus_is_port_valid(unsigned port)
{
return (port >= GMBUS_PORT_SSC && port <= GMBUS_PORT_DPD);
}
extern struct i2c_adapter *intel_gmbus_get_adapter(
struct drm_i915_private *dev_priv, unsigned port);
extern void intel_gmbus_set_speed(struct i2c_adapter *adapter, int speed);
extern void intel_gmbus_force_bit(struct i2c_adapter *adapter, bool force_bit);
extern inline bool intel_gmbus_is_forced_bit(struct i2c_adapter *adapter)
{
return container_of(adapter, struct intel_gmbus, adapter)->force_bit;
}
extern void intel_i2c_reset(struct drm_device *dev);
/* intel_opregion.c */
extern int intel_opregion_setup(struct drm_device *dev);
#ifdef CONFIG_ACPI
extern void intel_opregion_init(struct drm_device *dev);
extern void intel_opregion_fini(struct drm_device *dev);
extern void intel_opregion_asle_intr(struct drm_device *dev);
extern void intel_opregion_gse_intr(struct drm_device *dev);
extern void intel_opregion_enable_asle(struct drm_device *dev);
#else
static inline void intel_opregion_init(struct drm_device *dev) { return; }
static inline void intel_opregion_fini(struct drm_device *dev) { return; }
static inline void intel_opregion_asle_intr(struct drm_device *dev) { return; }
static inline void intel_opregion_gse_intr(struct drm_device *dev) { return; }
static inline void intel_opregion_enable_asle(struct drm_device *dev) { return; }
#endif
/* intel_acpi.c */
#ifdef CONFIG_ACPI
extern void intel_register_dsm_handler(void);
extern void intel_unregister_dsm_handler(void);
#else
static inline void intel_register_dsm_handler(void) { return; }
static inline void intel_unregister_dsm_handler(void) { return; }
#endif /* CONFIG_ACPI */
/* modesetting */
extern void intel_modeset_init_hw(struct drm_device *dev);
extern void intel_modeset_init(struct drm_device *dev);
extern void intel_modeset_gem_init(struct drm_device *dev);
extern void intel_modeset_cleanup(struct drm_device *dev);
extern int intel_modeset_vga_set_state(struct drm_device *dev, bool state);
extern bool intel_fbc_enabled(struct drm_device *dev);
extern void intel_disable_fbc(struct drm_device *dev);
extern bool ironlake_set_drps(struct drm_device *dev, u8 val);
extern void ironlake_init_pch_refclk(struct drm_device *dev);
extern void ironlake_enable_rc6(struct drm_device *dev);
extern void gen6_set_rps(struct drm_device *dev, u8 val);
extern void intel_detect_pch(struct drm_device *dev);
extern int intel_trans_dp_port_sel(struct drm_crtc *crtc);
drm/i915: rc6 in sysfs Merge rc6 information into the power group for our device. Until now the i915 driver has not had any sysfs entries (aside from the connector stuff enabled by drm core). Since it seems like we're likely to have more in the future I created a new file for sysfs stubs, as well as the rc6 sysfs functions which don't really belong elsewhere (perhaps i915_suspend, but most of the stuff is in intel_display,c). displays rc6 modes enabled (as a hex mask): cat /sys/class/drm/card0/power/rc6_enable displays #ms GPU has been in rc6 since boot: cat /sys/class/drm/card0/power/rc6_residency_ms displays #ms GPU has been in deep rc6 since boot: cat /sys/class/drm/card0/power/rc6p_residency_ms displays #ms GPU has been in deepest rc6 since boot: cat /sys/class/drm/card0/power/rc6pp_residency_ms Important note: I've seen on SNB that even when RC6 is *not* enabled the rc6 register seems to have a random value in it. I can only guess at the reason reason for this. Those writing tools that utilize this value need to be careful and probably want to scrutinize the value very carefully. v2: use common rc6 residency units to milliseconds for the other RC6 types v3: don't create sysfs files for GEN <= 5 add a rc6_enable to show a mask of enabled rc6 types use unmerge instead of remove for sysfs group squash intel_enable_rc6() extraction into this patch v4: rename sysfs files (Chris) CC: Chris Wilson <chris@chris-wilson.co.uk> CC: Daniel Vetter <daniel.vetter@ffwll.ch>f CC: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: squash in the 64bit division fix by Chris Wilson.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-04-11 04:17:01 +00:00
extern int intel_enable_rc6(const struct drm_device *dev);
extern bool i915_semaphore_is_enabled(struct drm_device *dev);
extern void __gen6_gt_force_wake_get(struct drm_i915_private *dev_priv);
extern void __gen6_gt_force_wake_mt_get(struct drm_i915_private *dev_priv);
extern void __gen6_gt_force_wake_put(struct drm_i915_private *dev_priv);
extern void __gen6_gt_force_wake_mt_put(struct drm_i915_private *dev_priv);
extern void vlv_force_wake_get(struct drm_i915_private *dev_priv);
extern void vlv_force_wake_put(struct drm_i915_private *dev_priv);
/* overlay */
#ifdef CONFIG_DEBUG_FS
extern struct intel_overlay_error_state *intel_overlay_capture_error_state(struct drm_device *dev);
extern void intel_overlay_print_error_state(struct seq_file *m, struct intel_overlay_error_state *error);
extern struct intel_display_error_state *intel_display_capture_error_state(struct drm_device *dev);
extern void intel_display_print_error_state(struct seq_file *m,
struct drm_device *dev,
struct intel_display_error_state *error);
#endif
/* On SNB platform, before reading ring registers forcewake bit
* must be set to prevent GT core from power down and stale values being
* returned.
*/
void gen6_gt_force_wake_get(struct drm_i915_private *dev_priv);
void gen6_gt_force_wake_put(struct drm_i915_private *dev_priv);
int __gen6_gt_wait_for_fifo(struct drm_i915_private *dev_priv);
#define __i915_read(x, y) \
u##x i915_read##x(struct drm_i915_private *dev_priv, u32 reg);
__i915_read(8, b)
__i915_read(16, w)
__i915_read(32, l)
__i915_read(64, q)
#undef __i915_read
#define __i915_write(x, y) \
void i915_write##x(struct drm_i915_private *dev_priv, u32 reg, u##x val);
__i915_write(8, b)
__i915_write(16, w)
__i915_write(32, l)
__i915_write(64, q)
#undef __i915_write
#define I915_READ8(reg) i915_read8(dev_priv, (reg))
#define I915_WRITE8(reg, val) i915_write8(dev_priv, (reg), (val))
#define I915_READ16(reg) i915_read16(dev_priv, (reg))
#define I915_WRITE16(reg, val) i915_write16(dev_priv, (reg), (val))
#define I915_READ16_NOTRACE(reg) readw(dev_priv->regs + (reg))
#define I915_WRITE16_NOTRACE(reg, val) writew(val, dev_priv->regs + (reg))
#define I915_READ(reg) i915_read32(dev_priv, (reg))
#define I915_WRITE(reg, val) i915_write32(dev_priv, (reg), (val))
#define I915_READ_NOTRACE(reg) readl(dev_priv->regs + (reg))
#define I915_WRITE_NOTRACE(reg, val) writel(val, dev_priv->regs + (reg))
#define I915_WRITE64(reg, val) i915_write64(dev_priv, (reg), (val))
#define I915_READ64(reg) i915_read64(dev_priv, (reg))
#define POSTING_READ(reg) (void)I915_READ_NOTRACE(reg)
#define POSTING_READ16(reg) (void)I915_READ16_NOTRACE(reg)
#endif