linux/drivers/net/wireless/wl12xx/spi.c

494 lines
11 KiB
C
Raw Normal View History

/*
* This file is part of wl1271
*
* Copyright (C) 2008-2009 Nokia Corporation
*
* Contact: Luciano Coelho <luciano.coelho@nokia.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*
*/
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/module.h>
#include <linux/crc7.h>
#include <linux/spi/spi.h>
#include <linux/wl12xx.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
#include "wl12xx.h"
#include "wl12xx_80211.h"
#include "io.h"
#include "reg.h"
#define WSPI_CMD_READ 0x40000000
#define WSPI_CMD_WRITE 0x00000000
#define WSPI_CMD_FIXED 0x20000000
#define WSPI_CMD_BYTE_LENGTH 0x1FFE0000
#define WSPI_CMD_BYTE_LENGTH_OFFSET 17
#define WSPI_CMD_BYTE_ADDR 0x0001FFFF
#define WSPI_INIT_CMD_CRC_LEN 5
#define WSPI_INIT_CMD_START 0x00
#define WSPI_INIT_CMD_TX 0x40
/* the extra bypass bit is sampled by the TNET as '1' */
#define WSPI_INIT_CMD_BYPASS_BIT 0x80
#define WSPI_INIT_CMD_FIXEDBUSY_LEN 0x07
#define WSPI_INIT_CMD_EN_FIXEDBUSY 0x80
#define WSPI_INIT_CMD_DIS_FIXEDBUSY 0x00
#define WSPI_INIT_CMD_IOD 0x40
#define WSPI_INIT_CMD_IP 0x20
#define WSPI_INIT_CMD_CS 0x10
#define WSPI_INIT_CMD_WS 0x08
#define WSPI_INIT_CMD_WSPI 0x01
#define WSPI_INIT_CMD_END 0x01
#define WSPI_INIT_CMD_LEN 8
#define HW_ACCESS_WSPI_FIXED_BUSY_LEN \
((WL1271_BUSY_WORD_LEN - 4) / sizeof(u32))
#define HW_ACCESS_WSPI_INIT_CMD_MASK 0
/* HW limitation: maximum possible chunk size is 4095 bytes */
#define WSPI_MAX_CHUNK_SIZE 4092
#define WSPI_MAX_NUM_OF_CHUNKS (WL1271_AGGR_BUFFER_SIZE / WSPI_MAX_CHUNK_SIZE)
static inline struct spi_device *wl_to_spi(struct wl1271 *wl)
{
return wl->if_priv;
}
static struct device *wl1271_spi_wl_to_dev(struct wl1271 *wl)
{
return &(wl_to_spi(wl)->dev);
}
static void wl1271_spi_disable_interrupts(struct wl1271 *wl)
{
disable_irq(wl->irq);
}
static void wl1271_spi_enable_interrupts(struct wl1271 *wl)
{
enable_irq(wl->irq);
}
static void wl1271_spi_reset(struct wl1271 *wl)
{
u8 *cmd;
struct spi_transfer t;
struct spi_message m;
cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL);
if (!cmd) {
wl1271_error("could not allocate cmd for spi reset");
return;
}
memset(&t, 0, sizeof(t));
spi_message_init(&m);
memset(cmd, 0xff, WSPI_INIT_CMD_LEN);
t.tx_buf = cmd;
t.len = WSPI_INIT_CMD_LEN;
spi_message_add_tail(&t, &m);
spi_sync(wl_to_spi(wl), &m);
wl1271_dump(DEBUG_SPI, "spi reset -> ", cmd, WSPI_INIT_CMD_LEN);
kfree(cmd);
}
static void wl1271_spi_init(struct wl1271 *wl)
{
u8 crc[WSPI_INIT_CMD_CRC_LEN], *cmd;
struct spi_transfer t;
struct spi_message m;
cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL);
if (!cmd) {
wl1271_error("could not allocate cmd for spi init");
return;
}
memset(crc, 0, sizeof(crc));
memset(&t, 0, sizeof(t));
spi_message_init(&m);
/*
* Set WSPI_INIT_COMMAND
* the data is being send from the MSB to LSB
*/
cmd[2] = 0xff;
cmd[3] = 0xff;
cmd[1] = WSPI_INIT_CMD_START | WSPI_INIT_CMD_TX;
cmd[0] = 0;
cmd[7] = 0;
cmd[6] |= HW_ACCESS_WSPI_INIT_CMD_MASK << 3;
cmd[6] |= HW_ACCESS_WSPI_FIXED_BUSY_LEN & WSPI_INIT_CMD_FIXEDBUSY_LEN;
if (HW_ACCESS_WSPI_FIXED_BUSY_LEN == 0)
cmd[5] |= WSPI_INIT_CMD_DIS_FIXEDBUSY;
else
cmd[5] |= WSPI_INIT_CMD_EN_FIXEDBUSY;
cmd[5] |= WSPI_INIT_CMD_IOD | WSPI_INIT_CMD_IP | WSPI_INIT_CMD_CS
| WSPI_INIT_CMD_WSPI | WSPI_INIT_CMD_WS;
crc[0] = cmd[1];
crc[1] = cmd[0];
crc[2] = cmd[7];
crc[3] = cmd[6];
crc[4] = cmd[5];
cmd[4] |= crc7(0, crc, WSPI_INIT_CMD_CRC_LEN) << 1;
cmd[4] |= WSPI_INIT_CMD_END;
t.tx_buf = cmd;
t.len = WSPI_INIT_CMD_LEN;
spi_message_add_tail(&t, &m);
spi_sync(wl_to_spi(wl), &m);
wl1271_dump(DEBUG_SPI, "spi init -> ", cmd, WSPI_INIT_CMD_LEN);
kfree(cmd);
}
#define WL1271_BUSY_WORD_TIMEOUT 1000
static int wl1271_spi_read_busy(struct wl1271 *wl)
{
struct spi_transfer t[1];
struct spi_message m;
u32 *busy_buf;
int num_busy_bytes = 0;
/*
* Read further busy words from SPI until a non-busy word is
* encountered, then read the data itself into the buffer.
*/
num_busy_bytes = WL1271_BUSY_WORD_TIMEOUT;
busy_buf = wl->buffer_busyword;
while (num_busy_bytes) {
num_busy_bytes--;
spi_message_init(&m);
memset(t, 0, sizeof(t));
t[0].rx_buf = busy_buf;
t[0].len = sizeof(u32);
t[0].cs_change = true;
spi_message_add_tail(&t[0], &m);
spi_sync(wl_to_spi(wl), &m);
if (*busy_buf & 0x1)
return 0;
}
/* The SPI bus is unresponsive, the read failed. */
wl1271_error("SPI read busy-word timeout!\n");
return -ETIMEDOUT;
}
static void wl1271_spi_raw_read(struct wl1271 *wl, int addr, void *buf,
size_t len, bool fixed)
{
struct spi_transfer t[2];
struct spi_message m;
u32 *busy_buf;
u32 *cmd;
u32 chunk_len;
while (len > 0) {
chunk_len = min((size_t)WSPI_MAX_CHUNK_SIZE, len);
cmd = &wl->buffer_cmd;
busy_buf = wl->buffer_busyword;
*cmd = 0;
*cmd |= WSPI_CMD_READ;
*cmd |= (chunk_len << WSPI_CMD_BYTE_LENGTH_OFFSET) &
WSPI_CMD_BYTE_LENGTH;
*cmd |= addr & WSPI_CMD_BYTE_ADDR;
if (fixed)
*cmd |= WSPI_CMD_FIXED;
spi_message_init(&m);
memset(t, 0, sizeof(t));
t[0].tx_buf = cmd;
t[0].len = 4;
t[0].cs_change = true;
spi_message_add_tail(&t[0], &m);
/* Busy and non busy words read */
t[1].rx_buf = busy_buf;
t[1].len = WL1271_BUSY_WORD_LEN;
t[1].cs_change = true;
spi_message_add_tail(&t[1], &m);
spi_sync(wl_to_spi(wl), &m);
if (!(busy_buf[WL1271_BUSY_WORD_CNT - 1] & 0x1) &&
wl1271_spi_read_busy(wl)) {
memset(buf, 0, chunk_len);
return;
}
spi_message_init(&m);
memset(t, 0, sizeof(t));
t[0].rx_buf = buf;
t[0].len = chunk_len;
t[0].cs_change = true;
spi_message_add_tail(&t[0], &m);
spi_sync(wl_to_spi(wl), &m);
wl1271_dump(DEBUG_SPI, "spi_read cmd -> ", cmd, sizeof(*cmd));
wl1271_dump(DEBUG_SPI, "spi_read buf <- ", buf, chunk_len);
if (!fixed)
addr += chunk_len;
buf += chunk_len;
len -= chunk_len;
}
}
static void wl1271_spi_raw_write(struct wl1271 *wl, int addr, void *buf,
size_t len, bool fixed)
{
struct spi_transfer t[2 * WSPI_MAX_NUM_OF_CHUNKS];
struct spi_message m;
u32 commands[WSPI_MAX_NUM_OF_CHUNKS];
u32 *cmd;
u32 chunk_len;
int i;
WARN_ON(len > WL1271_AGGR_BUFFER_SIZE);
spi_message_init(&m);
memset(t, 0, sizeof(t));
cmd = &commands[0];
i = 0;
while (len > 0) {
chunk_len = min((size_t)WSPI_MAX_CHUNK_SIZE, len);
*cmd = 0;
*cmd |= WSPI_CMD_WRITE;
*cmd |= (chunk_len << WSPI_CMD_BYTE_LENGTH_OFFSET) &
WSPI_CMD_BYTE_LENGTH;
*cmd |= addr & WSPI_CMD_BYTE_ADDR;
if (fixed)
*cmd |= WSPI_CMD_FIXED;
t[i].tx_buf = cmd;
t[i].len = sizeof(*cmd);
spi_message_add_tail(&t[i++], &m);
t[i].tx_buf = buf;
t[i].len = chunk_len;
spi_message_add_tail(&t[i++], &m);
wl1271_dump(DEBUG_SPI, "spi_write cmd -> ", cmd, sizeof(*cmd));
wl1271_dump(DEBUG_SPI, "spi_write buf -> ", buf, chunk_len);
if (!fixed)
addr += chunk_len;
buf += chunk_len;
len -= chunk_len;
cmd++;
}
spi_sync(wl_to_spi(wl), &m);
}
static irqreturn_t wl1271_hardirq(int irq, void *cookie)
{
struct wl1271 *wl = cookie;
unsigned long flags;
wl1271_debug(DEBUG_IRQ, "IRQ");
/* complete the ELP completion */
spin_lock_irqsave(&wl->wl_lock, flags);
set_bit(WL1271_FLAG_IRQ_RUNNING, &wl->flags);
if (wl->elp_compl) {
complete(wl->elp_compl);
wl->elp_compl = NULL;
}
spin_unlock_irqrestore(&wl->wl_lock, flags);
return IRQ_WAKE_THREAD;
}
static int wl1271_spi_set_power(struct wl1271 *wl, bool enable)
{
if (wl->set_power)
wl->set_power(enable);
return 0;
}
static struct wl1271_if_operations spi_ops = {
.read = wl1271_spi_raw_read,
.write = wl1271_spi_raw_write,
.reset = wl1271_spi_reset,
.init = wl1271_spi_init,
.power = wl1271_spi_set_power,
.dev = wl1271_spi_wl_to_dev,
.enable_irq = wl1271_spi_enable_interrupts,
.disable_irq = wl1271_spi_disable_interrupts,
.set_block_size = NULL,
};
static int __devinit wl1271_probe(struct spi_device *spi)
{
struct wl12xx_platform_data *pdata;
struct ieee80211_hw *hw;
struct wl1271 *wl;
unsigned long irqflags;
int ret;
pdata = spi->dev.platform_data;
if (!pdata) {
wl1271_error("no platform data");
return -ENODEV;
}
hw = wl1271_alloc_hw();
if (IS_ERR(hw))
return PTR_ERR(hw);
wl = hw->priv;
dev_set_drvdata(&spi->dev, wl);
wl->if_priv = spi;
wl->if_ops = &spi_ops;
/* This is the only SPI value that we need to set here, the rest
* comes from the board-peripherals file */
spi->bits_per_word = 32;
ret = spi_setup(spi);
if (ret < 0) {
wl1271_error("spi_setup failed");
goto out_free;
}
wl->set_power = pdata->set_power;
if (!wl->set_power) {
wl1271_error("set power function missing in platform data");
ret = -ENODEV;
goto out_free;
}
wl->ref_clock = pdata->board_ref_clock;
wl->tcxo_clock = pdata->board_tcxo_clock;
wl->platform_quirks = pdata->platform_quirks;
if (wl->platform_quirks & WL12XX_PLATFORM_QUIRK_EDGE_IRQ)
irqflags = IRQF_TRIGGER_RISING;
else
irqflags = IRQF_TRIGGER_HIGH | IRQF_ONESHOT;
wl->irq = spi->irq;
if (wl->irq < 0) {
wl1271_error("irq missing in platform data");
ret = -ENODEV;
goto out_free;
}
ret = request_threaded_irq(wl->irq, wl1271_hardirq, wl1271_irq,
irqflags,
DRIVER_NAME, wl);
if (ret < 0) {
wl1271_error("request_irq() failed: %d", ret);
goto out_free;
}
disable_irq(wl->irq);
ret = wl1271_init_ieee80211(wl);
if (ret)
goto out_irq;
ret = wl1271_register_hw(wl);
if (ret)
goto out_irq;
return 0;
out_irq:
free_irq(wl->irq, wl);
out_free:
wl1271_free_hw(wl);
return ret;
}
static int __devexit wl1271_remove(struct spi_device *spi)
{
struct wl1271 *wl = dev_get_drvdata(&spi->dev);
wl1271_unregister_hw(wl);
free_irq(wl->irq, wl);
wl1271_free_hw(wl);
return 0;
}
static struct spi_driver wl1271_spi_driver = {
.driver = {
.name = "wl1271_spi",
.bus = &spi_bus_type,
.owner = THIS_MODULE,
},
.probe = wl1271_probe,
.remove = __devexit_p(wl1271_remove),
};
static int __init wl1271_init(void)
{
return spi_register_driver(&wl1271_spi_driver);
}
static void __exit wl1271_exit(void)
{
spi_unregister_driver(&wl1271_spi_driver);
}
module_init(wl1271_init);
module_exit(wl1271_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Luciano Coelho <coelho@ti.com>");
MODULE_AUTHOR("Juuso Oikarinen <juuso.oikarinen@nokia.com>");
MODULE_FIRMWARE(WL1271_FW_NAME);
MODULE_FIRMWARE(WL128X_FW_NAME);
MODULE_FIRMWARE(WL127X_AP_FW_NAME);
MODULE_FIRMWARE(WL128X_AP_FW_NAME);
MODULE_ALIAS("spi:wl1271");