linux/kernel/irq/irqdomain.c

1979 lines
53 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
#define pr_fmt(fmt) "irq: " fmt
#include <linux/acpi.h>
#include <linux/debugfs.h>
#include <linux/hardirq.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/irqdesc.h>
#include <linux/irqdomain.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/topology.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
#include <linux/smp.h>
#include <linux/fs.h>
static LIST_HEAD(irq_domain_list);
static DEFINE_MUTEX(irq_domain_mutex);
static struct irq_domain *irq_default_domain;
static int irq_domain_alloc_irqs_locked(struct irq_domain *domain, int irq_base,
unsigned int nr_irqs, int node, void *arg,
bool realloc, const struct irq_affinity_desc *affinity);
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
static void irq_domain_check_hierarchy(struct irq_domain *domain);
struct irqchip_fwid {
struct fwnode_handle fwnode;
unsigned int type;
char *name;
phys_addr_t *pa;
};
genirq/debugfs: Add proper debugfs interface Debugging (hierarchical) interupt domains is tedious as there is no information about the hierarchy and no information about states of interrupts in the various domain levels. Add a debugfs directory 'irq' and subdirectories 'domains' and 'irqs'. The domains directory contains the domain files. The content is information about the domain. If the domain is part of a hierarchy then the parent domains are printed as well. # ls /sys/kernel/debug/irq/domains/ default INTEL-IR-2 INTEL-IR-MSI-2 IO-APIC-IR-2 PCI-MSI DMAR-MSI INTEL-IR-3 INTEL-IR-MSI-3 IO-APIC-IR-3 unknown-1 INTEL-IR-0 INTEL-IR-MSI-0 IO-APIC-IR-0 IO-APIC-IR-4 VECTOR INTEL-IR-1 INTEL-IR-MSI-1 IO-APIC-IR-1 PCI-HT # cat /sys/kernel/debug/irq/domains/VECTOR name: VECTOR size: 0 mapped: 216 flags: 0x00000041 # cat /sys/kernel/debug/irq/domains/IO-APIC-IR-0 name: IO-APIC-IR-0 size: 24 mapped: 19 flags: 0x00000041 parent: INTEL-IR-3 name: INTEL-IR-3 size: 65536 mapped: 167 flags: 0x00000041 parent: VECTOR name: VECTOR size: 0 mapped: 216 flags: 0x00000041 Unfortunately there is no per cpu information about the VECTOR domain (yet). The irqs directory contains detailed information about mapped interrupts. # cat /sys/kernel/debug/irq/irqs/3 handler: handle_edge_irq status: 0x00004000 istate: 0x00000000 ddepth: 1 wdepth: 0 dstate: 0x01018000 IRQD_IRQ_DISABLED IRQD_SINGLE_TARGET IRQD_MOVE_PCNTXT node: 0 affinity: 0-143 effectiv: 0 pending: domain: IO-APIC-IR-0 hwirq: 0x3 chip: IR-IO-APIC flags: 0x10 IRQCHIP_SKIP_SET_WAKE parent: domain: INTEL-IR-3 hwirq: 0x20000 chip: INTEL-IR flags: 0x0 parent: domain: VECTOR hwirq: 0x3 chip: APIC flags: 0x0 This was developed to simplify the debugging of the managed affinity changes. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20170619235444.537566163@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-06-19 23:37:17 +00:00
#ifdef CONFIG_GENERIC_IRQ_DEBUGFS
static void debugfs_add_domain_dir(struct irq_domain *d);
static void debugfs_remove_domain_dir(struct irq_domain *d);
#else
static inline void debugfs_add_domain_dir(struct irq_domain *d) { }
static inline void debugfs_remove_domain_dir(struct irq_domain *d) { }
#endif
static const char *irqchip_fwnode_get_name(const struct fwnode_handle *fwnode)
{
struct irqchip_fwid *fwid = container_of(fwnode, struct irqchip_fwid, fwnode);
return fwid->name;
}
const struct fwnode_operations irqchip_fwnode_ops = {
.get_name = irqchip_fwnode_get_name,
};
EXPORT_SYMBOL_GPL(irqchip_fwnode_ops);
/**
* __irq_domain_alloc_fwnode - Allocate a fwnode_handle suitable for
* identifying an irq domain
* @type: Type of irqchip_fwnode. See linux/irqdomain.h
* @id: Optional user provided id if name != NULL
* @name: Optional user provided domain name
* @pa: Optional user-provided physical address
*
* Allocate a struct irqchip_fwid, and return a pointer to the embedded
* fwnode_handle (or NULL on failure).
*
* Note: The types IRQCHIP_FWNODE_NAMED and IRQCHIP_FWNODE_NAMED_ID are
* solely to transport name information to irqdomain creation code. The
* node is not stored. For other types the pointer is kept in the irq
* domain struct.
*/
struct fwnode_handle *__irq_domain_alloc_fwnode(unsigned int type, int id,
const char *name,
phys_addr_t *pa)
{
struct irqchip_fwid *fwid;
char *n;
fwid = kzalloc(sizeof(*fwid), GFP_KERNEL);
switch (type) {
case IRQCHIP_FWNODE_NAMED:
n = kasprintf(GFP_KERNEL, "%s", name);
break;
case IRQCHIP_FWNODE_NAMED_ID:
n = kasprintf(GFP_KERNEL, "%s-%d", name, id);
break;
default:
n = kasprintf(GFP_KERNEL, "irqchip@%pa", pa);
break;
}
if (!fwid || !n) {
kfree(fwid);
kfree(n);
return NULL;
}
fwid->type = type;
fwid->name = n;
fwid->pa = pa;
fwnode_init(&fwid->fwnode, &irqchip_fwnode_ops);
return &fwid->fwnode;
}
EXPORT_SYMBOL_GPL(__irq_domain_alloc_fwnode);
/**
* irq_domain_free_fwnode - Free a non-OF-backed fwnode_handle
*
* Free a fwnode_handle allocated with irq_domain_alloc_fwnode.
*/
void irq_domain_free_fwnode(struct fwnode_handle *fwnode)
{
struct irqchip_fwid *fwid;
genirq/msi: Free the fwnode created by msi_create_device_irq_domain() msi_create_device_irq_domain() creates a firmware node for the new domain, which is never freed. kmemleak reports: unreferenced object 0xffff888120ba9a00 (size 96): comm "systemd-modules", pid 221, jiffies 4294893411 (age 635.732s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 e0 19 8b 83 ff ff ff ff ................ 00 00 00 00 00 00 00 00 18 9a ba 20 81 88 ff ff ........... .... backtrace: [<000000008cdbc98d>] __irq_domain_alloc_fwnode+0x51/0x2b0 [<00000000c57acf9d>] msi_create_device_irq_domain+0x283/0x670 [<000000009b567982>] __pci_enable_msix_range+0x49e/0xdb0 [<0000000077cc1445>] pci_alloc_irq_vectors_affinity+0x11f/0x1c0 [<00000000532e9ef5>] mlx5_irq_table_create+0x24c/0x940 [mlx5_core] [<00000000fabd2b80>] mlx5_load+0x1fa/0x680 [mlx5_core] [<000000006bb22ae4>] mlx5_init_one+0x485/0x670 [mlx5_core] [<00000000eaa5e1ad>] probe_one+0x4c2/0x720 [mlx5_core] [<00000000df8efb43>] local_pci_probe+0xd6/0x170 [<0000000085cb9924>] pci_device_probe+0x231/0x6e0 Use the proper free operation for the firmware wnode so the name is freed during error unwind of msi_create_device_irq_domain() and also free the node in msi_remove_device_irq_domain() if it was automatically allocated. To avoid extra NULL pointer checks make irq_domain_free_fwnode() tolerant of NULL. Fixes: 27a6dea3ebaa ("genirq/msi: Provide msi_create/free_device_irq_domain()") Reported-by: Omri Barazi <obarazi@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Kalle Valo <kvalo@kernel.org> Tested-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/0-v2-24af6665e2da+c9-msi_leak_jgg@nvidia.com
2023-01-17 19:16:17 +00:00
if (!fwnode || WARN_ON(!is_fwnode_irqchip(fwnode)))
return;
fwid = container_of(fwnode, struct irqchip_fwid, fwnode);
kfree(fwid->name);
kfree(fwid);
}
EXPORT_SYMBOL_GPL(irq_domain_free_fwnode);
static struct irq_domain *__irq_domain_create(struct fwnode_handle *fwnode,
unsigned int size,
irq_hw_number_t hwirq_max,
int direct_max,
const struct irq_domain_ops *ops,
void *host_data)
{
struct irqchip_fwid *fwid;
struct irq_domain *domain;
static atomic_t unknown_domains;
if (WARN_ON((size && direct_max) ||
(!IS_ENABLED(CONFIG_IRQ_DOMAIN_NOMAP) && direct_max) ||
(direct_max && (direct_max != hwirq_max))))
return NULL;
domain = kzalloc_node(struct_size(domain, revmap, size),
GFP_KERNEL, of_node_to_nid(to_of_node(fwnode)));
if (!domain)
return NULL;
if (is_fwnode_irqchip(fwnode)) {
fwid = container_of(fwnode, struct irqchip_fwid, fwnode);
switch (fwid->type) {
case IRQCHIP_FWNODE_NAMED:
case IRQCHIP_FWNODE_NAMED_ID:
irqdomain: Add the missing assignment of domain->fwnode for named fwnode Recently device pass-through stops working for Linux VM running on Hyper-V. git-bisect shows the regression is caused by the recent commit 467a3bb97432 ("PCI: hv: Allocate a named fwnode ..."), but the root cause is that the commit d59f6617eef0 forgets to set the domain->fwnode for IRQCHIP_FWNODE_NAMED*, and as a result: 1. The domain->fwnode remains to be NULL. 2. irq_find_matching_fwspec() returns NULL since "h->fwnode == fwnode" is false, and pci_set_bus_msi_domain() sets the Hyper-V PCI root bus's msi_domain to NULL. 3. When the device is added onto the root bus, the device's dev->msi_domain is set to NULL in pci_set_msi_domain(). 4. When a device driver tries to enable MSI-X, pci_msi_setup_msi_irqs() calls arch_setup_msi_irqs(), which uses the native MSI chip (i.e. arch/x86/kernel/apic/msi.c: pci_msi_controller) to set up the irqs, but actually pci_msi_setup_msi_irqs() is supposed to call msi_domain_alloc_irqs() with the hbus->irq_domain, which is created in hv_pcie_init_irq_domain() and is associated with the Hyper-V chip hv_msi_irq_chip. Consequently, the irq line is not properly set up, and the device driver can not receive any interrupt. Fixes: d59f6617eef0 ("genirq: Allow fwnode to carry name information only") Fixes: 467a3bb97432 ("PCI: hv: Allocate a named fwnode instead of an address-based one") Reported-by: Lili Deng <v-lide@microsoft.com> Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/PU1P153MB01694D9AF625AC335C600C5FBFBE0@PU1P153MB0169.APCP153.PROD.OUTLOOK.COM
2019-09-02 23:14:56 +00:00
domain->fwnode = fwnode;
domain->name = kstrdup(fwid->name, GFP_KERNEL);
if (!domain->name) {
kfree(domain);
return NULL;
}
domain->flags |= IRQ_DOMAIN_NAME_ALLOCATED;
break;
default:
domain->fwnode = fwnode;
domain->name = fwid->name;
break;
}
} else if (is_of_node(fwnode) || is_acpi_device_node(fwnode) ||
is_software_node(fwnode)) {
char *name;
/*
* fwnode paths contain '/', which debugfs is legitimately
* unhappy about. Replace them with ':', which does
* the trick and is not as offensive as '\'...
*/
name = kasprintf(GFP_KERNEL, "%pfw", fwnode);
if (!name) {
kfree(domain);
return NULL;
}
domain->name = strreplace(name, '/', ':');
domain->fwnode = fwnode;
domain->flags |= IRQ_DOMAIN_NAME_ALLOCATED;
}
if (!domain->name) {
if (fwnode)
pr_err("Invalid fwnode type for irqdomain\n");
domain->name = kasprintf(GFP_KERNEL, "unknown-%d",
atomic_inc_return(&unknown_domains));
if (!domain->name) {
kfree(domain);
return NULL;
}
domain->flags |= IRQ_DOMAIN_NAME_ALLOCATED;
}
fwnode_handle_get(fwnode);
fwnode_dev_initialized(fwnode, true);
/* Fill structure */
INIT_RADIX_TREE(&domain->revmap_tree, GFP_KERNEL);
domain->ops = ops;
domain->host_data = host_data;
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 00:06:02 +00:00
domain->hwirq_max = hwirq_max;
if (direct_max)
domain->flags |= IRQ_DOMAIN_FLAG_NO_MAP;
domain->revmap_size = size;
/*
* Hierarchical domains use the domain lock of the root domain
* (innermost domain).
*
* For non-hierarchical domains (as for root domains), the root
* pointer is set to the domain itself so that &domain->root->mutex
* always points to the right lock.
*/
mutex_init(&domain->mutex);
domain->root = domain;
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
irq_domain_check_hierarchy(domain);
return domain;
}
static void __irq_domain_publish(struct irq_domain *domain)
{
mutex_lock(&irq_domain_mutex);
genirq/debugfs: Add proper debugfs interface Debugging (hierarchical) interupt domains is tedious as there is no information about the hierarchy and no information about states of interrupts in the various domain levels. Add a debugfs directory 'irq' and subdirectories 'domains' and 'irqs'. The domains directory contains the domain files. The content is information about the domain. If the domain is part of a hierarchy then the parent domains are printed as well. # ls /sys/kernel/debug/irq/domains/ default INTEL-IR-2 INTEL-IR-MSI-2 IO-APIC-IR-2 PCI-MSI DMAR-MSI INTEL-IR-3 INTEL-IR-MSI-3 IO-APIC-IR-3 unknown-1 INTEL-IR-0 INTEL-IR-MSI-0 IO-APIC-IR-0 IO-APIC-IR-4 VECTOR INTEL-IR-1 INTEL-IR-MSI-1 IO-APIC-IR-1 PCI-HT # cat /sys/kernel/debug/irq/domains/VECTOR name: VECTOR size: 0 mapped: 216 flags: 0x00000041 # cat /sys/kernel/debug/irq/domains/IO-APIC-IR-0 name: IO-APIC-IR-0 size: 24 mapped: 19 flags: 0x00000041 parent: INTEL-IR-3 name: INTEL-IR-3 size: 65536 mapped: 167 flags: 0x00000041 parent: VECTOR name: VECTOR size: 0 mapped: 216 flags: 0x00000041 Unfortunately there is no per cpu information about the VECTOR domain (yet). The irqs directory contains detailed information about mapped interrupts. # cat /sys/kernel/debug/irq/irqs/3 handler: handle_edge_irq status: 0x00004000 istate: 0x00000000 ddepth: 1 wdepth: 0 dstate: 0x01018000 IRQD_IRQ_DISABLED IRQD_SINGLE_TARGET IRQD_MOVE_PCNTXT node: 0 affinity: 0-143 effectiv: 0 pending: domain: IO-APIC-IR-0 hwirq: 0x3 chip: IR-IO-APIC flags: 0x10 IRQCHIP_SKIP_SET_WAKE parent: domain: INTEL-IR-3 hwirq: 0x20000 chip: INTEL-IR flags: 0x0 parent: domain: VECTOR hwirq: 0x3 chip: APIC flags: 0x0 This was developed to simplify the debugging of the managed affinity changes. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20170619235444.537566163@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-06-19 23:37:17 +00:00
debugfs_add_domain_dir(domain);
list_add(&domain->link, &irq_domain_list);
mutex_unlock(&irq_domain_mutex);
pr_debug("Added domain %s\n", domain->name);
}
/**
* __irq_domain_add() - Allocate a new irq_domain data structure
* @fwnode: firmware node for the interrupt controller
* @size: Size of linear map; 0 for radix mapping only
* @hwirq_max: Maximum number of interrupts supported by controller
* @direct_max: Maximum value of direct maps; Use ~0 for no limit; 0 for no
* direct mapping
* @ops: domain callbacks
* @host_data: Controller private data pointer
*
* Allocates and initializes an irq_domain structure.
* Returns pointer to IRQ domain, or NULL on failure.
*/
struct irq_domain *__irq_domain_add(struct fwnode_handle *fwnode, unsigned int size,
irq_hw_number_t hwirq_max, int direct_max,
const struct irq_domain_ops *ops,
void *host_data)
{
struct irq_domain *domain;
domain = __irq_domain_create(fwnode, size, hwirq_max, direct_max,
ops, host_data);
if (domain)
__irq_domain_publish(domain);
return domain;
}
EXPORT_SYMBOL_GPL(__irq_domain_add);
/**
* irq_domain_remove() - Remove an irq domain.
* @domain: domain to remove
*
* This routine is used to remove an irq domain. The caller must ensure
* that all mappings within the domain have been disposed of prior to
* use, depending on the revmap type.
*/
void irq_domain_remove(struct irq_domain *domain)
{
mutex_lock(&irq_domain_mutex);
genirq/debugfs: Add proper debugfs interface Debugging (hierarchical) interupt domains is tedious as there is no information about the hierarchy and no information about states of interrupts in the various domain levels. Add a debugfs directory 'irq' and subdirectories 'domains' and 'irqs'. The domains directory contains the domain files. The content is information about the domain. If the domain is part of a hierarchy then the parent domains are printed as well. # ls /sys/kernel/debug/irq/domains/ default INTEL-IR-2 INTEL-IR-MSI-2 IO-APIC-IR-2 PCI-MSI DMAR-MSI INTEL-IR-3 INTEL-IR-MSI-3 IO-APIC-IR-3 unknown-1 INTEL-IR-0 INTEL-IR-MSI-0 IO-APIC-IR-0 IO-APIC-IR-4 VECTOR INTEL-IR-1 INTEL-IR-MSI-1 IO-APIC-IR-1 PCI-HT # cat /sys/kernel/debug/irq/domains/VECTOR name: VECTOR size: 0 mapped: 216 flags: 0x00000041 # cat /sys/kernel/debug/irq/domains/IO-APIC-IR-0 name: IO-APIC-IR-0 size: 24 mapped: 19 flags: 0x00000041 parent: INTEL-IR-3 name: INTEL-IR-3 size: 65536 mapped: 167 flags: 0x00000041 parent: VECTOR name: VECTOR size: 0 mapped: 216 flags: 0x00000041 Unfortunately there is no per cpu information about the VECTOR domain (yet). The irqs directory contains detailed information about mapped interrupts. # cat /sys/kernel/debug/irq/irqs/3 handler: handle_edge_irq status: 0x00004000 istate: 0x00000000 ddepth: 1 wdepth: 0 dstate: 0x01018000 IRQD_IRQ_DISABLED IRQD_SINGLE_TARGET IRQD_MOVE_PCNTXT node: 0 affinity: 0-143 effectiv: 0 pending: domain: IO-APIC-IR-0 hwirq: 0x3 chip: IR-IO-APIC flags: 0x10 IRQCHIP_SKIP_SET_WAKE parent: domain: INTEL-IR-3 hwirq: 0x20000 chip: INTEL-IR flags: 0x0 parent: domain: VECTOR hwirq: 0x3 chip: APIC flags: 0x0 This was developed to simplify the debugging of the managed affinity changes. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20170619235444.537566163@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-06-19 23:37:17 +00:00
debugfs_remove_domain_dir(domain);
radix-tree: introduce radix_tree_empty Commit e61452365372 ("radix_tree: add support for multi-order entries") left the impression that the support for multiorder radix tree entries was functional. As soon as Ross tried to use it, it became apparent that my testing was completely inadequate, and it didn't even work a little bit for orders that were not a multiple of shift. This series of patches is the result of about 6 weeks of redesign, reimplementation, testing, arguing and hair-pulling. The great news is that the test-suite is now far better than it was. That's reflected in the diffstat for the test-suite alone: 12 files changed, 436 insertions(+), 28 deletions(-) The highlight for users of the tree is that the restriction on the order of inserted entries being >= RADIX_TREE_MAP_SHIFT is now gone; the radix tree now supports any order between 0 and 64. For those who are interested in how the tree works, patch 9 is probably the most interesting one as it introduces the new machinery for handling sibling entries. I've tried to be fair in attributing authorship to the person who contributed the majority of the code in each patch; Ross has been an invaluable partner in the development of this support and it's fair to say that each of us has code in every commit. I should also express my appreciation of the 0day testing. It prompted me that I was bloating the tinyconfig in an unacceptable way, and it bisected to a commit which contained a rather nasty memory-corruption bug. This patch (of 29): The irqdomain code was checking for 0 or 1 entries, not 0 entries like the comment said they were. Introduce a new helper that will actually check for an empty tree. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com> Cc: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-21 00:01:33 +00:00
WARN_ON(!radix_tree_empty(&domain->revmap_tree));
list_del(&domain->link);
/*
* If the going away domain is the default one, reset it.
*/
if (unlikely(irq_default_domain == domain))
irq_set_default_host(NULL);
mutex_unlock(&irq_domain_mutex);
pr_debug("Removed domain %s\n", domain->name);
fwnode_dev_initialized(domain->fwnode, false);
fwnode_handle_put(domain->fwnode);
if (domain->flags & IRQ_DOMAIN_NAME_ALLOCATED)
kfree(domain->name);
kfree(domain);
}
EXPORT_SYMBOL_GPL(irq_domain_remove);
void irq_domain_update_bus_token(struct irq_domain *domain,
enum irq_domain_bus_token bus_token)
{
char *name;
if (domain->bus_token == bus_token)
return;
mutex_lock(&irq_domain_mutex);
domain->bus_token = bus_token;
name = kasprintf(GFP_KERNEL, "%s-%d", domain->name, bus_token);
if (!name) {
mutex_unlock(&irq_domain_mutex);
return;
}
debugfs_remove_domain_dir(domain);
if (domain->flags & IRQ_DOMAIN_NAME_ALLOCATED)
kfree(domain->name);
else
domain->flags |= IRQ_DOMAIN_NAME_ALLOCATED;
domain->name = name;
debugfs_add_domain_dir(domain);
mutex_unlock(&irq_domain_mutex);
}
EXPORT_SYMBOL_GPL(irq_domain_update_bus_token);
/**
* irq_domain_create_simple() - Register an irq_domain and optionally map a range of irqs
* @fwnode: firmware node for the interrupt controller
* @size: total number of irqs in mapping
* @first_irq: first number of irq block assigned to the domain,
* pass zero to assign irqs on-the-fly. If first_irq is non-zero, then
* pre-map all of the irqs in the domain to virqs starting at first_irq.
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
* @ops: domain callbacks
* @host_data: Controller private data pointer
*
* Allocates an irq_domain, and optionally if first_irq is positive then also
* allocate irq_descs and map all of the hwirqs to virqs starting at first_irq.
*
* This is intended to implement the expected behaviour for most
* interrupt controllers. If device tree is used, then first_irq will be 0 and
* irqs get mapped dynamically on the fly. However, if the controller requires
* static virq assignments (non-DT boot) then it will set that up correctly.
*/
struct irq_domain *irq_domain_create_simple(struct fwnode_handle *fwnode,
unsigned int size,
unsigned int first_irq,
const struct irq_domain_ops *ops,
void *host_data)
{
struct irq_domain *domain;
domain = __irq_domain_add(fwnode, size, size, 0, ops, host_data);
if (!domain)
return NULL;
if (first_irq > 0) {
if (IS_ENABLED(CONFIG_SPARSE_IRQ)) {
/* attempt to allocated irq_descs */
int rc = irq_alloc_descs(first_irq, first_irq, size,
of_node_to_nid(to_of_node(fwnode)));
if (rc < 0)
pr_info("Cannot allocate irq_descs @ IRQ%d, assuming pre-allocated\n",
first_irq);
}
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 00:06:02 +00:00
irq_domain_associate_many(domain, first_irq, 0, size);
}
return domain;
}
EXPORT_SYMBOL_GPL(irq_domain_create_simple);
/**
* irq_domain_add_legacy() - Allocate and register a legacy revmap irq_domain.
* @of_node: pointer to interrupt controller's device tree node.
* @size: total number of irqs in legacy mapping
* @first_irq: first number of irq block assigned to the domain
* @first_hwirq: first hwirq number to use for the translation. Should normally
* be '0', but a positive integer can be used if the effective
* hwirqs numbering does not begin at zero.
* @ops: map/unmap domain callbacks
* @host_data: Controller private data pointer
*
* Note: the map() callback will be called before this function returns
* for all legacy interrupts except 0 (which is always the invalid irq for
* a legacy controller).
*/
struct irq_domain *irq_domain_add_legacy(struct device_node *of_node,
unsigned int size,
unsigned int first_irq,
irq_hw_number_t first_hwirq,
const struct irq_domain_ops *ops,
void *host_data)
{
return irq_domain_create_legacy(of_node_to_fwnode(of_node), size,
first_irq, first_hwirq, ops, host_data);
}
EXPORT_SYMBOL_GPL(irq_domain_add_legacy);
struct irq_domain *irq_domain_create_legacy(struct fwnode_handle *fwnode,
unsigned int size,
unsigned int first_irq,
irq_hw_number_t first_hwirq,
const struct irq_domain_ops *ops,
void *host_data)
{
struct irq_domain *domain;
domain = __irq_domain_add(fwnode, first_hwirq + size, first_hwirq + size, 0, ops, host_data);
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
if (domain)
irq_domain_associate_many(domain, first_irq, first_hwirq, size);
return domain;
}
EXPORT_SYMBOL_GPL(irq_domain_create_legacy);
/**
* irq_find_matching_fwspec() - Locates a domain for a given fwspec
* @fwspec: FW specifier for an interrupt
genirq/irqdomain: Allow irq domain aliasing It is not uncommon (at least with the ARM stuff) to have a piece of hardware that implements different flavours of "interrupts". A typical example of this is the GICv3 ITS, which implements standard PCI/MSI support, but also some form of "generic MSI". So far, the PCI/MSI domain is registered using the ITS device_node, so that irq_find_host can return it. On the contrary, the raw MSI domain is not registered with an device_node, making it impossible to be looked up by another subsystem (obviously, using the same device_node twice would only result in confusion, as it is not defined which one irq_find_host would return). A solution to this is to "type" domains that may be aliasing, and to be able to lookup an device_node that matches a given type. For this, we introduce irq_find_matching_host() as a superset of irq_find_host: struct irq_domain *irq_find_matching_host(struct device_node *node, enum irq_domain_bus_token bus_token); where bus_token is the "type" we want to match the domain against (so far, only DOMAIN_BUS_ANY is defined). This result in some moderately invasive changes on the PPC side (which is the only user of the .match method). This has otherwise no functionnal change. Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Yijing Wang <wangyijing@huawei.com> Cc: Ma Jun <majun258@huawei.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Duc Dang <dhdang@apm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1438091186-10244-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-28 13:46:08 +00:00
* @bus_token: domain-specific data
*/
struct irq_domain *irq_find_matching_fwspec(struct irq_fwspec *fwspec,
enum irq_domain_bus_token bus_token)
{
struct irq_domain *h, *found = NULL;
struct fwnode_handle *fwnode = fwspec->fwnode;
int rc;
/* We might want to match the legacy controller last since
* it might potentially be set to match all interrupts in
* the absence of a device node. This isn't a problem so far
* yet though...
genirq/irqdomain: Allow irq domain aliasing It is not uncommon (at least with the ARM stuff) to have a piece of hardware that implements different flavours of "interrupts". A typical example of this is the GICv3 ITS, which implements standard PCI/MSI support, but also some form of "generic MSI". So far, the PCI/MSI domain is registered using the ITS device_node, so that irq_find_host can return it. On the contrary, the raw MSI domain is not registered with an device_node, making it impossible to be looked up by another subsystem (obviously, using the same device_node twice would only result in confusion, as it is not defined which one irq_find_host would return). A solution to this is to "type" domains that may be aliasing, and to be able to lookup an device_node that matches a given type. For this, we introduce irq_find_matching_host() as a superset of irq_find_host: struct irq_domain *irq_find_matching_host(struct device_node *node, enum irq_domain_bus_token bus_token); where bus_token is the "type" we want to match the domain against (so far, only DOMAIN_BUS_ANY is defined). This result in some moderately invasive changes on the PPC side (which is the only user of the .match method). This has otherwise no functionnal change. Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Yijing Wang <wangyijing@huawei.com> Cc: Ma Jun <majun258@huawei.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Duc Dang <dhdang@apm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1438091186-10244-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-28 13:46:08 +00:00
*
* bus_token == DOMAIN_BUS_ANY matches any domain, any other
* values must generate an exact match for the domain to be
* selected.
*/
mutex_lock(&irq_domain_mutex);
list_for_each_entry(h, &irq_domain_list, link) {
if (h->ops->select && fwspec->param_count)
rc = h->ops->select(h, fwspec, bus_token);
else if (h->ops->match)
rc = h->ops->match(h, to_of_node(fwnode), bus_token);
else
rc = ((fwnode != NULL) && (h->fwnode == fwnode) &&
genirq/irqdomain: Allow irq domain aliasing It is not uncommon (at least with the ARM stuff) to have a piece of hardware that implements different flavours of "interrupts". A typical example of this is the GICv3 ITS, which implements standard PCI/MSI support, but also some form of "generic MSI". So far, the PCI/MSI domain is registered using the ITS device_node, so that irq_find_host can return it. On the contrary, the raw MSI domain is not registered with an device_node, making it impossible to be looked up by another subsystem (obviously, using the same device_node twice would only result in confusion, as it is not defined which one irq_find_host would return). A solution to this is to "type" domains that may be aliasing, and to be able to lookup an device_node that matches a given type. For this, we introduce irq_find_matching_host() as a superset of irq_find_host: struct irq_domain *irq_find_matching_host(struct device_node *node, enum irq_domain_bus_token bus_token); where bus_token is the "type" we want to match the domain against (so far, only DOMAIN_BUS_ANY is defined). This result in some moderately invasive changes on the PPC side (which is the only user of the .match method). This has otherwise no functionnal change. Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Yijing Wang <wangyijing@huawei.com> Cc: Ma Jun <majun258@huawei.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Duc Dang <dhdang@apm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1438091186-10244-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-28 13:46:08 +00:00
((bus_token == DOMAIN_BUS_ANY) ||
(h->bus_token == bus_token)));
if (rc) {
found = h;
break;
}
}
mutex_unlock(&irq_domain_mutex);
return found;
}
EXPORT_SYMBOL_GPL(irq_find_matching_fwspec);
/**
* irq_set_default_host() - Set a "default" irq domain
* @domain: default domain pointer
*
* For convenience, it's possible to set a "default" domain that will be used
* whenever NULL is passed to irq_create_mapping(). It makes life easier for
* platforms that want to manipulate a few hard coded interrupt numbers that
* aren't properly represented in the device-tree.
*/
void irq_set_default_host(struct irq_domain *domain)
{
pr_debug("Default domain set to @0x%p\n", domain);
irq_default_domain = domain;
}
EXPORT_SYMBOL_GPL(irq_set_default_host);
/**
* irq_get_default_host() - Retrieve the "default" irq domain
*
* Returns: the default domain, if any.
*
* Modern code should never use this. This should only be used on
* systems that cannot implement a firmware->fwnode mapping (which
* both DT and ACPI provide).
*/
struct irq_domain *irq_get_default_host(void)
{
return irq_default_domain;
}
EXPORT_SYMBOL_GPL(irq_get_default_host);
static bool irq_domain_is_nomap(struct irq_domain *domain)
{
return IS_ENABLED(CONFIG_IRQ_DOMAIN_NOMAP) &&
(domain->flags & IRQ_DOMAIN_FLAG_NO_MAP);
}
static void irq_domain_clear_mapping(struct irq_domain *domain,
irq_hw_number_t hwirq)
{
lockdep_assert_held(&domain->root->mutex);
if (irq_domain_is_nomap(domain))
return;
if (hwirq < domain->revmap_size)
rcu_assign_pointer(domain->revmap[hwirq], NULL);
else
radix_tree_delete(&domain->revmap_tree, hwirq);
}
static void irq_domain_set_mapping(struct irq_domain *domain,
irq_hw_number_t hwirq,
struct irq_data *irq_data)
{
/*
* This also makes sure that all domains point to the same root when
* called from irq_domain_insert_irq() for each domain in a hierarchy.
*/
lockdep_assert_held(&domain->root->mutex);
if (irq_domain_is_nomap(domain))
return;
if (hwirq < domain->revmap_size)
rcu_assign_pointer(domain->revmap[hwirq], irq_data);
else
radix_tree_insert(&domain->revmap_tree, hwirq, irq_data);
}
static void irq_domain_disassociate(struct irq_domain *domain, unsigned int irq)
{
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 00:06:02 +00:00
struct irq_data *irq_data = irq_get_irq_data(irq);
irq_hw_number_t hwirq;
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 00:06:02 +00:00
if (WARN(!irq_data || irq_data->domain != domain,
"virq%i doesn't exist; cannot disassociate\n", irq))
return;
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 00:06:02 +00:00
hwirq = irq_data->hwirq;
mutex_lock(&domain->root->mutex);
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 00:06:02 +00:00
irq_set_status_flags(irq, IRQ_NOREQUEST);
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 00:06:02 +00:00
/* remove chip and handler */
irq_set_chip_and_handler(irq, NULL, NULL);
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 00:06:02 +00:00
/* Make sure it's completed */
synchronize_irq(irq);
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 00:06:02 +00:00
/* Tell the PIC about it */
if (domain->ops->unmap)
domain->ops->unmap(domain, irq);
smp_mb();
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 00:06:02 +00:00
irq_data->domain = NULL;
irq_data->hwirq = 0;
domain->mapcount--;
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 00:06:02 +00:00
/* Clear reverse map for this hwirq */
irq_domain_clear_mapping(domain, hwirq);
mutex_unlock(&domain->root->mutex);
}
static int irq_domain_associate_locked(struct irq_domain *domain, unsigned int virq,
irq_hw_number_t hwirq)
{
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 00:06:02 +00:00
struct irq_data *irq_data = irq_get_irq_data(virq);
int ret;
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 00:06:02 +00:00
if (WARN(hwirq >= domain->hwirq_max,
"error: hwirq 0x%x is too large for %s\n", (int)hwirq, domain->name))
return -EINVAL;
if (WARN(!irq_data, "error: virq%i is not allocated", virq))
return -EINVAL;
if (WARN(irq_data->domain, "error: virq%i is already associated", virq))
return -EINVAL;
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 00:06:02 +00:00
irq_data->hwirq = hwirq;
irq_data->domain = domain;
if (domain->ops->map) {
ret = domain->ops->map(domain, virq, hwirq);
if (ret != 0) {
/*
* If map() returns -EPERM, this interrupt is protected
* by the firmware or some other service and shall not
* be mapped. Don't bother telling the user about it.
*/
if (ret != -EPERM) {
pr_info("%s didn't like hwirq-0x%lx to VIRQ%i mapping (rc=%d)\n",
domain->name, hwirq, virq, ret);
}
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 00:06:02 +00:00
irq_data->domain = NULL;
irq_data->hwirq = 0;
return ret;
irqdomain: Support for static IRQ mapping and association. This adds a new strict mapping API for supporting creation of linux IRQs at existing positions within the domain. The new routines are as follows: For dynamic allocation and insertion to specified ranges: - irq_create_identity_mapping() - irq_create_strict_mappings() These will allocate and associate a range of linux IRQs at the specified location. This can be used by controllers that have their own static linux IRQ definitions to map a hwirq range to, as well as for platforms that wish to establish 1:1 identity mapping between linux and hwirq space. For insertion to specified ranges by platforms that do their own irq_desc management: - irq_domain_associate() - irq_domain_associate_many() These in turn call back in to the domain's ->map() routine, for further processing by the platform. Disassociation of IRQs get handled through irq_dispose_mapping() as normal. With these in place it should be possible to begin migration of legacy IRQ domains to linear ones, without requiring special handling for static vs dynamic IRQ definitions in DT vs non-DT paths. This also makes it possible for domains with static mappings to adopt whichever tree model best fits their needs, rather than simply restricting them to linear revmaps. Signed-off-by: Paul Mundt <lethal@linux-sh.org> [grant.likely: Reorganized irq_domain_associate{,_many} to have all logic in one place] [grant.likely: Add error checking for unallocated irq_descs at associate time] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <rob.herring@calxeda.com>
2012-06-17 22:17:04 +00:00
}
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 00:06:02 +00:00
}
domain->mapcount++;
irq_domain_set_mapping(domain, hwirq, irq_data);
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 00:06:02 +00:00
irq_clear_status_flags(virq, IRQ_NOREQUEST);
return 0;
}
int irq_domain_associate(struct irq_domain *domain, unsigned int virq,
irq_hw_number_t hwirq)
{
int ret;
mutex_lock(&domain->root->mutex);
ret = irq_domain_associate_locked(domain, virq, hwirq);
mutex_unlock(&domain->root->mutex);
return ret;
}
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 00:06:02 +00:00
EXPORT_SYMBOL_GPL(irq_domain_associate);
irqdomain: Support for static IRQ mapping and association. This adds a new strict mapping API for supporting creation of linux IRQs at existing positions within the domain. The new routines are as follows: For dynamic allocation and insertion to specified ranges: - irq_create_identity_mapping() - irq_create_strict_mappings() These will allocate and associate a range of linux IRQs at the specified location. This can be used by controllers that have their own static linux IRQ definitions to map a hwirq range to, as well as for platforms that wish to establish 1:1 identity mapping between linux and hwirq space. For insertion to specified ranges by platforms that do their own irq_desc management: - irq_domain_associate() - irq_domain_associate_many() These in turn call back in to the domain's ->map() routine, for further processing by the platform. Disassociation of IRQs get handled through irq_dispose_mapping() as normal. With these in place it should be possible to begin migration of legacy IRQ domains to linear ones, without requiring special handling for static vs dynamic IRQ definitions in DT vs non-DT paths. This also makes it possible for domains with static mappings to adopt whichever tree model best fits their needs, rather than simply restricting them to linear revmaps. Signed-off-by: Paul Mundt <lethal@linux-sh.org> [grant.likely: Reorganized irq_domain_associate{,_many} to have all logic in one place] [grant.likely: Add error checking for unallocated irq_descs at associate time] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <rob.herring@calxeda.com>
2012-06-17 22:17:04 +00:00
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 00:06:02 +00:00
void irq_domain_associate_many(struct irq_domain *domain, unsigned int irq_base,
irq_hw_number_t hwirq_base, int count)
{
struct device_node *of_node;
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 00:06:02 +00:00
int i;
of_node = irq_domain_get_of_node(domain);
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 00:06:02 +00:00
pr_debug("%s(%s, irqbase=%i, hwbase=%i, count=%i)\n", __func__,
of_node_full_name(of_node), irq_base, (int)hwirq_base, count);
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 00:06:02 +00:00
for (i = 0; i < count; i++)
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 00:06:02 +00:00
irq_domain_associate(domain, irq_base + i, hwirq_base + i);
}
irqdomain: Support for static IRQ mapping and association. This adds a new strict mapping API for supporting creation of linux IRQs at existing positions within the domain. The new routines are as follows: For dynamic allocation and insertion to specified ranges: - irq_create_identity_mapping() - irq_create_strict_mappings() These will allocate and associate a range of linux IRQs at the specified location. This can be used by controllers that have their own static linux IRQ definitions to map a hwirq range to, as well as for platforms that wish to establish 1:1 identity mapping between linux and hwirq space. For insertion to specified ranges by platforms that do their own irq_desc management: - irq_domain_associate() - irq_domain_associate_many() These in turn call back in to the domain's ->map() routine, for further processing by the platform. Disassociation of IRQs get handled through irq_dispose_mapping() as normal. With these in place it should be possible to begin migration of legacy IRQ domains to linear ones, without requiring special handling for static vs dynamic IRQ definitions in DT vs non-DT paths. This also makes it possible for domains with static mappings to adopt whichever tree model best fits their needs, rather than simply restricting them to linear revmaps. Signed-off-by: Paul Mundt <lethal@linux-sh.org> [grant.likely: Reorganized irq_domain_associate{,_many} to have all logic in one place] [grant.likely: Add error checking for unallocated irq_descs at associate time] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <rob.herring@calxeda.com>
2012-06-17 22:17:04 +00:00
EXPORT_SYMBOL_GPL(irq_domain_associate_many);
#ifdef CONFIG_IRQ_DOMAIN_NOMAP
/**
* irq_create_direct_mapping() - Allocate an irq for direct mapping
* @domain: domain to allocate the irq for or NULL for default domain
*
* This routine is used for irq controllers which can choose the hardware
* interrupt numbers they generate. In such a case it's simplest to use
* the linux irq as the hardware interrupt number. It still uses the linear
* or radix tree to store the mapping, but the irq controller can optimize
* the revmap path by using the hwirq directly.
*/
unsigned int irq_create_direct_mapping(struct irq_domain *domain)
{
struct device_node *of_node;
unsigned int virq;
if (domain == NULL)
domain = irq_default_domain;
of_node = irq_domain_get_of_node(domain);
virq = irq_alloc_desc_from(1, of_node_to_nid(of_node));
if (!virq) {
pr_debug("create_direct virq allocation failed\n");
return 0;
}
if (virq >= domain->hwirq_max) {
pr_err("ERROR: no free irqs available below %lu maximum\n",
domain->hwirq_max);
irq_free_desc(virq);
return 0;
}
pr_debug("create_direct obtained virq %d\n", virq);
irqdomain: Support for static IRQ mapping and association. This adds a new strict mapping API for supporting creation of linux IRQs at existing positions within the domain. The new routines are as follows: For dynamic allocation and insertion to specified ranges: - irq_create_identity_mapping() - irq_create_strict_mappings() These will allocate and associate a range of linux IRQs at the specified location. This can be used by controllers that have their own static linux IRQ definitions to map a hwirq range to, as well as for platforms that wish to establish 1:1 identity mapping between linux and hwirq space. For insertion to specified ranges by platforms that do their own irq_desc management: - irq_domain_associate() - irq_domain_associate_many() These in turn call back in to the domain's ->map() routine, for further processing by the platform. Disassociation of IRQs get handled through irq_dispose_mapping() as normal. With these in place it should be possible to begin migration of legacy IRQ domains to linear ones, without requiring special handling for static vs dynamic IRQ definitions in DT vs non-DT paths. This also makes it possible for domains with static mappings to adopt whichever tree model best fits their needs, rather than simply restricting them to linear revmaps. Signed-off-by: Paul Mundt <lethal@linux-sh.org> [grant.likely: Reorganized irq_domain_associate{,_many} to have all logic in one place] [grant.likely: Add error checking for unallocated irq_descs at associate time] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <rob.herring@calxeda.com>
2012-06-17 22:17:04 +00:00
if (irq_domain_associate(domain, virq, virq)) {
irq_free_desc(virq);
return 0;
}
return virq;
}
EXPORT_SYMBOL_GPL(irq_create_direct_mapping);
#endif
static unsigned int irq_create_mapping_affinity_locked(struct irq_domain *domain,
irq_hw_number_t hwirq,
const struct irq_affinity_desc *affinity)
{
struct device_node *of_node = irq_domain_get_of_node(domain);
int virq;
pr_debug("irq_create_mapping(0x%p, 0x%lx)\n", domain, hwirq);
/* Allocate a virtual interrupt number */
virq = irq_domain_alloc_descs(-1, 1, hwirq, of_node_to_nid(of_node),
affinity);
if (virq <= 0) {
pr_debug("-> virq allocation failed\n");
return 0;
}
if (irq_domain_associate_locked(domain, virq, hwirq)) {
irq_free_desc(virq);
return 0;
}
pr_debug("irq %lu on domain %s mapped to virtual irq %u\n",
hwirq, of_node_full_name(of_node), virq);
return virq;
}
/**
* irq_create_mapping_affinity() - Map a hardware interrupt into linux irq space
* @domain: domain owning this hardware interrupt or NULL for default domain
* @hwirq: hardware irq number in that domain space
* @affinity: irq affinity
*
* Only one mapping per hardware interrupt is permitted. Returns a linux
* irq number.
* If the sense/trigger is to be specified, set_irq_type() should be called
* on the number returned from that call.
*/
unsigned int irq_create_mapping_affinity(struct irq_domain *domain,
irq_hw_number_t hwirq,
const struct irq_affinity_desc *affinity)
{
int virq;
/* Look for default domain if necessary */
if (domain == NULL)
domain = irq_default_domain;
if (domain == NULL) {
WARN(1, "%s(, %lx) called with NULL domain\n", __func__, hwirq);
return 0;
}
mutex_lock(&domain->root->mutex);
/* Check if mapping already exists */
virq = irq_find_mapping(domain, hwirq);
if (virq) {
pr_debug("existing mapping on virq %d\n", virq);
goto out;
}
virq = irq_create_mapping_affinity_locked(domain, hwirq, affinity);
out:
mutex_unlock(&domain->root->mutex);
return virq;
}
EXPORT_SYMBOL_GPL(irq_create_mapping_affinity);
static int irq_domain_translate(struct irq_domain *d,
struct irq_fwspec *fwspec,
irq_hw_number_t *hwirq, unsigned int *type)
{
#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
if (d->ops->translate)
return d->ops->translate(d, fwspec, hwirq, type);
#endif
if (d->ops->xlate)
return d->ops->xlate(d, to_of_node(fwspec->fwnode),
fwspec->param, fwspec->param_count,
hwirq, type);
/* If domain has no translation, then we assume interrupt line */
*hwirq = fwspec->param[0];
return 0;
}
void of_phandle_args_to_fwspec(struct device_node *np, const u32 *args,
unsigned int count, struct irq_fwspec *fwspec)
{
int i;
fwspec->fwnode = of_node_to_fwnode(np);
fwspec->param_count = count;
for (i = 0; i < count; i++)
fwspec->param[i] = args[i];
}
EXPORT_SYMBOL_GPL(of_phandle_args_to_fwspec);
unsigned int irq_create_fwspec_mapping(struct irq_fwspec *fwspec)
{
struct irq_domain *domain;
struct irq_data *irq_data;
irq_hw_number_t hwirq;
unsigned int type = IRQ_TYPE_NONE;
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
int virq;
irqdomain: Allow domain lookup with DOMAIN_BUS_WIRED token Let's take the (outlandish) example of an interrupt controller capable of handling both wired interrupts and PCI MSIs. With the current code, the PCI MSI domain is going to be tagged with DOMAIN_BUS_PCI_MSI, and the wired domain with DOMAIN_BUS_ANY. Things get hairy when we start looking up the domain for a wired interrupt (typically when creating it based on some firmware information - DT or ACPI). In irq_create_fwspec_mapping(), we perform the lookup using DOMAIN_BUS_ANY, which is actually used as a wildcard. This gives us one chance out of two to end up with the wrong domain, and we try to configure a wired interrupt with the MSI domain. Everything grinds to a halt pretty quickly. What we really need to do is to start looking for a domain that would uniquely identify a wired interrupt domain, and only use DOMAIN_BUS_ANY as a fallback. In order to solve this, let's introduce a new DOMAIN_BUS_WIRED token, which is going to be used exactly as described above. Of course, this depends on the irqchip to setup the domain bus_token, and nobody had to implement this so far. Only so far. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Link: http://lkml.kernel.org/r/1453816347-32720-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-01-26 13:52:25 +00:00
if (fwspec->fwnode) {
domain = irq_find_matching_fwspec(fwspec, DOMAIN_BUS_WIRED);
irqdomain: Allow domain lookup with DOMAIN_BUS_WIRED token Let's take the (outlandish) example of an interrupt controller capable of handling both wired interrupts and PCI MSIs. With the current code, the PCI MSI domain is going to be tagged with DOMAIN_BUS_PCI_MSI, and the wired domain with DOMAIN_BUS_ANY. Things get hairy when we start looking up the domain for a wired interrupt (typically when creating it based on some firmware information - DT or ACPI). In irq_create_fwspec_mapping(), we perform the lookup using DOMAIN_BUS_ANY, which is actually used as a wildcard. This gives us one chance out of two to end up with the wrong domain, and we try to configure a wired interrupt with the MSI domain. Everything grinds to a halt pretty quickly. What we really need to do is to start looking for a domain that would uniquely identify a wired interrupt domain, and only use DOMAIN_BUS_ANY as a fallback. In order to solve this, let's introduce a new DOMAIN_BUS_WIRED token, which is going to be used exactly as described above. Of course, this depends on the irqchip to setup the domain bus_token, and nobody had to implement this so far. Only so far. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Link: http://lkml.kernel.org/r/1453816347-32720-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-01-26 13:52:25 +00:00
if (!domain)
domain = irq_find_matching_fwspec(fwspec, DOMAIN_BUS_ANY);
irqdomain: Allow domain lookup with DOMAIN_BUS_WIRED token Let's take the (outlandish) example of an interrupt controller capable of handling both wired interrupts and PCI MSIs. With the current code, the PCI MSI domain is going to be tagged with DOMAIN_BUS_PCI_MSI, and the wired domain with DOMAIN_BUS_ANY. Things get hairy when we start looking up the domain for a wired interrupt (typically when creating it based on some firmware information - DT or ACPI). In irq_create_fwspec_mapping(), we perform the lookup using DOMAIN_BUS_ANY, which is actually used as a wildcard. This gives us one chance out of two to end up with the wrong domain, and we try to configure a wired interrupt with the MSI domain. Everything grinds to a halt pretty quickly. What we really need to do is to start looking for a domain that would uniquely identify a wired interrupt domain, and only use DOMAIN_BUS_ANY as a fallback. In order to solve this, let's introduce a new DOMAIN_BUS_WIRED token, which is going to be used exactly as described above. Of course, this depends on the irqchip to setup the domain bus_token, and nobody had to implement this so far. Only so far. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Link: http://lkml.kernel.org/r/1453816347-32720-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-01-26 13:52:25 +00:00
} else {
domain = irq_default_domain;
irqdomain: Allow domain lookup with DOMAIN_BUS_WIRED token Let's take the (outlandish) example of an interrupt controller capable of handling both wired interrupts and PCI MSIs. With the current code, the PCI MSI domain is going to be tagged with DOMAIN_BUS_PCI_MSI, and the wired domain with DOMAIN_BUS_ANY. Things get hairy when we start looking up the domain for a wired interrupt (typically when creating it based on some firmware information - DT or ACPI). In irq_create_fwspec_mapping(), we perform the lookup using DOMAIN_BUS_ANY, which is actually used as a wildcard. This gives us one chance out of two to end up with the wrong domain, and we try to configure a wired interrupt with the MSI domain. Everything grinds to a halt pretty quickly. What we really need to do is to start looking for a domain that would uniquely identify a wired interrupt domain, and only use DOMAIN_BUS_ANY as a fallback. In order to solve this, let's introduce a new DOMAIN_BUS_WIRED token, which is going to be used exactly as described above. Of course, this depends on the irqchip to setup the domain bus_token, and nobody had to implement this so far. Only so far. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Link: http://lkml.kernel.org/r/1453816347-32720-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-01-26 13:52:25 +00:00
}
if (!domain) {
pr_warn("no irq domain found for %s !\n",
of_node_full_name(to_of_node(fwspec->fwnode)));
return 0;
}
if (irq_domain_translate(domain, fwspec, &hwirq, &type))
return 0;
irqdomain: Fix handling of type settings for existing mappings When mapping an IRQ, it is possible that a mapping for the IRQ already exists. If mapping does exist then there are the following issues with regard to the handling of the IRQ type settings ... 1. If the domain is part of a hierarchy, then: a. We do not check that the type settings for the existing mapping match those of the new mapping. b. We do not check to see if the type settings have been programmed yet (and they might not have been) and so we may never set the type. 2. If the domain is NOT part of a hierarchy, we will overwrite the current type settings programmed if they are different from the previous mapping. Please note that irq_create_mapping() calls irq_find_mapping() to check if a mapping already exists. Although, it may be unlikely that the type settings for a shared interrupt would not match, nonetheless we should check for this. Therefore, to fix this check if a mapping exists (regardless of whether the domain is part of a hierarchy or not) and if it does then: 1. Return the IRQ number if the type settings match or are not specified. 2. Program the type settings and return the IRQ number if the type settings have not been programmed yet. 3. Otherwise if the type setting do not match, then print a warning and don't return the IRQ number. Furthermore, add a warning if the type return by irq_domain_translate() has bits outside the sense mask set and then clear these bits. If these bits are not cleared then this will cause the comparision of the type settings for an existing mapping to fail with that of the new mapping even if the sense bit themselves match. The reason being is that the existing type settings are read by calling irq_get_trigger_type() which will clear any bits outside the sense mask. This will allow us to detect irqchips that are not correctly clearing these bits and fix them. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-06-07 15:12:26 +00:00
/*
* WARN if the irqchip returns a type with bits
* outside the sense mask set and clear these bits.
*/
if (WARN_ON(type & ~IRQ_TYPE_SENSE_MASK))
type &= IRQ_TYPE_SENSE_MASK;
mutex_lock(&domain->root->mutex);
irqdomain: Fix handling of type settings for existing mappings When mapping an IRQ, it is possible that a mapping for the IRQ already exists. If mapping does exist then there are the following issues with regard to the handling of the IRQ type settings ... 1. If the domain is part of a hierarchy, then: a. We do not check that the type settings for the existing mapping match those of the new mapping. b. We do not check to see if the type settings have been programmed yet (and they might not have been) and so we may never set the type. 2. If the domain is NOT part of a hierarchy, we will overwrite the current type settings programmed if they are different from the previous mapping. Please note that irq_create_mapping() calls irq_find_mapping() to check if a mapping already exists. Although, it may be unlikely that the type settings for a shared interrupt would not match, nonetheless we should check for this. Therefore, to fix this check if a mapping exists (regardless of whether the domain is part of a hierarchy or not) and if it does then: 1. Return the IRQ number if the type settings match or are not specified. 2. Program the type settings and return the IRQ number if the type settings have not been programmed yet. 3. Otherwise if the type setting do not match, then print a warning and don't return the IRQ number. Furthermore, add a warning if the type return by irq_domain_translate() has bits outside the sense mask set and then clear these bits. If these bits are not cleared then this will cause the comparision of the type settings for an existing mapping to fail with that of the new mapping even if the sense bit themselves match. The reason being is that the existing type settings are read by calling irq_get_trigger_type() which will clear any bits outside the sense mask. This will allow us to detect irqchips that are not correctly clearing these bits and fix them. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-06-07 15:12:26 +00:00
/*
* If we've already configured this interrupt,
* don't do it again, or hell will break loose.
*/
virq = irq_find_mapping(domain, hwirq);
if (virq) {
/*
irqdomain: Fix handling of type settings for existing mappings When mapping an IRQ, it is possible that a mapping for the IRQ already exists. If mapping does exist then there are the following issues with regard to the handling of the IRQ type settings ... 1. If the domain is part of a hierarchy, then: a. We do not check that the type settings for the existing mapping match those of the new mapping. b. We do not check to see if the type settings have been programmed yet (and they might not have been) and so we may never set the type. 2. If the domain is NOT part of a hierarchy, we will overwrite the current type settings programmed if they are different from the previous mapping. Please note that irq_create_mapping() calls irq_find_mapping() to check if a mapping already exists. Although, it may be unlikely that the type settings for a shared interrupt would not match, nonetheless we should check for this. Therefore, to fix this check if a mapping exists (regardless of whether the domain is part of a hierarchy or not) and if it does then: 1. Return the IRQ number if the type settings match or are not specified. 2. Program the type settings and return the IRQ number if the type settings have not been programmed yet. 3. Otherwise if the type setting do not match, then print a warning and don't return the IRQ number. Furthermore, add a warning if the type return by irq_domain_translate() has bits outside the sense mask set and then clear these bits. If these bits are not cleared then this will cause the comparision of the type settings for an existing mapping to fail with that of the new mapping even if the sense bit themselves match. The reason being is that the existing type settings are read by calling irq_get_trigger_type() which will clear any bits outside the sense mask. This will allow us to detect irqchips that are not correctly clearing these bits and fix them. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-06-07 15:12:26 +00:00
* If the trigger type is not specified or matches the
* current trigger type then we are done so return the
* interrupt number.
*/
irqdomain: Fix handling of type settings for existing mappings When mapping an IRQ, it is possible that a mapping for the IRQ already exists. If mapping does exist then there are the following issues with regard to the handling of the IRQ type settings ... 1. If the domain is part of a hierarchy, then: a. We do not check that the type settings for the existing mapping match those of the new mapping. b. We do not check to see if the type settings have been programmed yet (and they might not have been) and so we may never set the type. 2. If the domain is NOT part of a hierarchy, we will overwrite the current type settings programmed if they are different from the previous mapping. Please note that irq_create_mapping() calls irq_find_mapping() to check if a mapping already exists. Although, it may be unlikely that the type settings for a shared interrupt would not match, nonetheless we should check for this. Therefore, to fix this check if a mapping exists (regardless of whether the domain is part of a hierarchy or not) and if it does then: 1. Return the IRQ number if the type settings match or are not specified. 2. Program the type settings and return the IRQ number if the type settings have not been programmed yet. 3. Otherwise if the type setting do not match, then print a warning and don't return the IRQ number. Furthermore, add a warning if the type return by irq_domain_translate() has bits outside the sense mask set and then clear these bits. If these bits are not cleared then this will cause the comparision of the type settings for an existing mapping to fail with that of the new mapping even if the sense bit themselves match. The reason being is that the existing type settings are read by calling irq_get_trigger_type() which will clear any bits outside the sense mask. This will allow us to detect irqchips that are not correctly clearing these bits and fix them. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-06-07 15:12:26 +00:00
if (type == IRQ_TYPE_NONE || type == irq_get_trigger_type(virq))
goto out;
irqdomain: Fix handling of type settings for existing mappings When mapping an IRQ, it is possible that a mapping for the IRQ already exists. If mapping does exist then there are the following issues with regard to the handling of the IRQ type settings ... 1. If the domain is part of a hierarchy, then: a. We do not check that the type settings for the existing mapping match those of the new mapping. b. We do not check to see if the type settings have been programmed yet (and they might not have been) and so we may never set the type. 2. If the domain is NOT part of a hierarchy, we will overwrite the current type settings programmed if they are different from the previous mapping. Please note that irq_create_mapping() calls irq_find_mapping() to check if a mapping already exists. Although, it may be unlikely that the type settings for a shared interrupt would not match, nonetheless we should check for this. Therefore, to fix this check if a mapping exists (regardless of whether the domain is part of a hierarchy or not) and if it does then: 1. Return the IRQ number if the type settings match or are not specified. 2. Program the type settings and return the IRQ number if the type settings have not been programmed yet. 3. Otherwise if the type setting do not match, then print a warning and don't return the IRQ number. Furthermore, add a warning if the type return by irq_domain_translate() has bits outside the sense mask set and then clear these bits. If these bits are not cleared then this will cause the comparision of the type settings for an existing mapping to fail with that of the new mapping even if the sense bit themselves match. The reason being is that the existing type settings are read by calling irq_get_trigger_type() which will clear any bits outside the sense mask. This will allow us to detect irqchips that are not correctly clearing these bits and fix them. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-06-07 15:12:26 +00:00
/*
* If the trigger type has not been set yet, then set
* it now and return the interrupt number.
*/
if (irq_get_trigger_type(virq) == IRQ_TYPE_NONE) {
irq_data = irq_get_irq_data(virq);
if (!irq_data) {
virq = 0;
goto out;
}
irqd_set_trigger_type(irq_data, type);
goto out;
irqdomain: Fix handling of type settings for existing mappings When mapping an IRQ, it is possible that a mapping for the IRQ already exists. If mapping does exist then there are the following issues with regard to the handling of the IRQ type settings ... 1. If the domain is part of a hierarchy, then: a. We do not check that the type settings for the existing mapping match those of the new mapping. b. We do not check to see if the type settings have been programmed yet (and they might not have been) and so we may never set the type. 2. If the domain is NOT part of a hierarchy, we will overwrite the current type settings programmed if they are different from the previous mapping. Please note that irq_create_mapping() calls irq_find_mapping() to check if a mapping already exists. Although, it may be unlikely that the type settings for a shared interrupt would not match, nonetheless we should check for this. Therefore, to fix this check if a mapping exists (regardless of whether the domain is part of a hierarchy or not) and if it does then: 1. Return the IRQ number if the type settings match or are not specified. 2. Program the type settings and return the IRQ number if the type settings have not been programmed yet. 3. Otherwise if the type setting do not match, then print a warning and don't return the IRQ number. Furthermore, add a warning if the type return by irq_domain_translate() has bits outside the sense mask set and then clear these bits. If these bits are not cleared then this will cause the comparision of the type settings for an existing mapping to fail with that of the new mapping even if the sense bit themselves match. The reason being is that the existing type settings are read by calling irq_get_trigger_type() which will clear any bits outside the sense mask. This will allow us to detect irqchips that are not correctly clearing these bits and fix them. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-06-07 15:12:26 +00:00
}
pr_warn("type mismatch, failed to map hwirq-%lu for %s!\n",
hwirq, of_node_full_name(to_of_node(fwspec->fwnode)));
virq = 0;
goto out;
irqdomain: Fix handling of type settings for existing mappings When mapping an IRQ, it is possible that a mapping for the IRQ already exists. If mapping does exist then there are the following issues with regard to the handling of the IRQ type settings ... 1. If the domain is part of a hierarchy, then: a. We do not check that the type settings for the existing mapping match those of the new mapping. b. We do not check to see if the type settings have been programmed yet (and they might not have been) and so we may never set the type. 2. If the domain is NOT part of a hierarchy, we will overwrite the current type settings programmed if they are different from the previous mapping. Please note that irq_create_mapping() calls irq_find_mapping() to check if a mapping already exists. Although, it may be unlikely that the type settings for a shared interrupt would not match, nonetheless we should check for this. Therefore, to fix this check if a mapping exists (regardless of whether the domain is part of a hierarchy or not) and if it does then: 1. Return the IRQ number if the type settings match or are not specified. 2. Program the type settings and return the IRQ number if the type settings have not been programmed yet. 3. Otherwise if the type setting do not match, then print a warning and don't return the IRQ number. Furthermore, add a warning if the type return by irq_domain_translate() has bits outside the sense mask set and then clear these bits. If these bits are not cleared then this will cause the comparision of the type settings for an existing mapping to fail with that of the new mapping even if the sense bit themselves match. The reason being is that the existing type settings are read by calling irq_get_trigger_type() which will clear any bits outside the sense mask. This will allow us to detect irqchips that are not correctly clearing these bits and fix them. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-06-07 15:12:26 +00:00
}
if (irq_domain_is_hierarchy(domain)) {
virq = irq_domain_alloc_irqs_locked(domain, -1, 1, NUMA_NO_NODE,
fwspec, false, NULL);
if (virq <= 0) {
virq = 0;
goto out;
}
} else {
/* Create mapping */
virq = irq_create_mapping_affinity_locked(domain, hwirq, NULL);
if (!virq)
goto out;
}
irq_data = irq_get_irq_data(virq);
if (WARN_ON(!irq_data)) {
virq = 0;
goto out;
}
/* Store trigger type */
irqd_set_trigger_type(irq_data, type);
out:
mutex_unlock(&domain->root->mutex);
return virq;
}
EXPORT_SYMBOL_GPL(irq_create_fwspec_mapping);
unsigned int irq_create_of_mapping(struct of_phandle_args *irq_data)
{
struct irq_fwspec fwspec;
of_phandle_args_to_fwspec(irq_data->np, irq_data->args,
irq_data->args_count, &fwspec);
return irq_create_fwspec_mapping(&fwspec);
}
EXPORT_SYMBOL_GPL(irq_create_of_mapping);
/**
* irq_dispose_mapping() - Unmap an interrupt
* @virq: linux irq number of the interrupt to unmap
*/
void irq_dispose_mapping(unsigned int virq)
{
struct irq_data *irq_data = irq_get_irq_data(virq);
struct irq_domain *domain;
if (!virq || !irq_data)
return;
domain = irq_data->domain;
if (WARN_ON(domain == NULL))
return;
if (irq_domain_is_hierarchy(domain)) {
irq_domain_free_irqs(virq, 1);
} else {
irq_domain_disassociate(domain, virq);
irq_free_desc(virq);
}
}
EXPORT_SYMBOL_GPL(irq_dispose_mapping);
/**
* __irq_resolve_mapping() - Find a linux irq from a hw irq number.
* @domain: domain owning this hardware interrupt
* @hwirq: hardware irq number in that domain space
* @irq: optional pointer to return the Linux irq if required
*
* Returns the interrupt descriptor.
*/
struct irq_desc *__irq_resolve_mapping(struct irq_domain *domain,
irq_hw_number_t hwirq,
unsigned int *irq)
{
struct irq_desc *desc = NULL;
struct irq_data *data;
/* Look for default domain if necessary */
if (domain == NULL)
domain = irq_default_domain;
if (domain == NULL)
return desc;
if (irq_domain_is_nomap(domain)) {
if (hwirq < domain->hwirq_max) {
data = irq_domain_get_irq_data(domain, hwirq);
if (data && data->hwirq == hwirq)
desc = irq_data_to_desc(data);
if (irq && desc)
*irq = hwirq;
}
return desc;
}
rcu_read_lock();
/* Check if the hwirq is in the linear revmap. */
if (hwirq < domain->revmap_size)
data = rcu_dereference(domain->revmap[hwirq]);
else
data = radix_tree_lookup(&domain->revmap_tree, hwirq);
if (likely(data)) {
desc = irq_data_to_desc(data);
if (irq)
*irq = data->irq;
}
rcu_read_unlock();
return desc;
}
EXPORT_SYMBOL_GPL(__irq_resolve_mapping);
/**
* irq_domain_xlate_onecell() - Generic xlate for direct one cell bindings
*
* Device Tree IRQ specifier translation function which works with one cell
* bindings where the cell value maps directly to the hwirq number.
*/
int irq_domain_xlate_onecell(struct irq_domain *d, struct device_node *ctrlr,
const u32 *intspec, unsigned int intsize,
unsigned long *out_hwirq, unsigned int *out_type)
{
if (WARN_ON(intsize < 1))
return -EINVAL;
*out_hwirq = intspec[0];
*out_type = IRQ_TYPE_NONE;
return 0;
}
EXPORT_SYMBOL_GPL(irq_domain_xlate_onecell);
/**
* irq_domain_xlate_twocell() - Generic xlate for direct two cell bindings
*
* Device Tree IRQ specifier translation function which works with two cell
* bindings where the cell values map directly to the hwirq number
* and linux irq flags.
*/
int irq_domain_xlate_twocell(struct irq_domain *d, struct device_node *ctrlr,
const u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq, unsigned int *out_type)
{
struct irq_fwspec fwspec;
of_phandle_args_to_fwspec(ctrlr, intspec, intsize, &fwspec);
return irq_domain_translate_twocell(d, &fwspec, out_hwirq, out_type);
}
EXPORT_SYMBOL_GPL(irq_domain_xlate_twocell);
/**
* irq_domain_xlate_onetwocell() - Generic xlate for one or two cell bindings
*
* Device Tree IRQ specifier translation function which works with either one
* or two cell bindings where the cell values map directly to the hwirq number
* and linux irq flags.
*
* Note: don't use this function unless your interrupt controller explicitly
* supports both one and two cell bindings. For the majority of controllers
* the _onecell() or _twocell() variants above should be used.
*/
int irq_domain_xlate_onetwocell(struct irq_domain *d,
struct device_node *ctrlr,
const u32 *intspec, unsigned int intsize,
unsigned long *out_hwirq, unsigned int *out_type)
{
if (WARN_ON(intsize < 1))
return -EINVAL;
*out_hwirq = intspec[0];
if (intsize > 1)
*out_type = intspec[1] & IRQ_TYPE_SENSE_MASK;
else
*out_type = IRQ_TYPE_NONE;
return 0;
}
EXPORT_SYMBOL_GPL(irq_domain_xlate_onetwocell);
const struct irq_domain_ops irq_domain_simple_ops = {
.xlate = irq_domain_xlate_onetwocell,
};
EXPORT_SYMBOL_GPL(irq_domain_simple_ops);
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
/**
* irq_domain_translate_onecell() - Generic translate for direct one cell
* bindings
*/
int irq_domain_translate_onecell(struct irq_domain *d,
struct irq_fwspec *fwspec,
unsigned long *out_hwirq,
unsigned int *out_type)
{
if (WARN_ON(fwspec->param_count < 1))
return -EINVAL;
*out_hwirq = fwspec->param[0];
*out_type = IRQ_TYPE_NONE;
return 0;
}
EXPORT_SYMBOL_GPL(irq_domain_translate_onecell);
/**
* irq_domain_translate_twocell() - Generic translate for direct two cell
* bindings
*
* Device Tree IRQ specifier translation function which works with two cell
* bindings where the cell values map directly to the hwirq number
* and linux irq flags.
*/
int irq_domain_translate_twocell(struct irq_domain *d,
struct irq_fwspec *fwspec,
unsigned long *out_hwirq,
unsigned int *out_type)
{
if (WARN_ON(fwspec->param_count < 2))
return -EINVAL;
*out_hwirq = fwspec->param[0];
*out_type = fwspec->param[1] & IRQ_TYPE_SENSE_MASK;
return 0;
}
EXPORT_SYMBOL_GPL(irq_domain_translate_twocell);
int irq_domain_alloc_descs(int virq, unsigned int cnt, irq_hw_number_t hwirq,
genirq/core: Introduce struct irq_affinity_desc The interrupt affinity management uses straight cpumask pointers to convey the automatically assigned affinity masks for managed interrupts. The core interrupt descriptor allocation also decides based on the pointer being non NULL whether an interrupt is managed or not. Devices which use managed interrupts usually have two classes of interrupts: - Interrupts for multiple device queues - Interrupts for general device management Currently both classes are treated the same way, i.e. as managed interrupts. The general interrupts get the default affinity mask assigned while the device queue interrupts are spread out over the possible CPUs. Treating the general interrupts as managed is both a limitation and under certain circumstances a bug. Assume the following situation: default_irq_affinity = 4..7 So if CPUs 4-7 are offlined, then the core code will shut down the device management interrupts because the last CPU in their affinity mask went offline. It's also a limitation because it's desired to allow manual placement of the general device interrupts for various reasons. If they are marked managed then the interrupt affinity setting from both user and kernel space is disabled. To remedy that situation it's required to convey more information than the cpumasks through various interfaces related to interrupt descriptor allocation. Instead of adding yet another argument, create a new data structure 'irq_affinity_desc' which for now just contains the cpumask. This struct can be expanded to convey auxilliary information in the next step. No functional change, just preparatory work. [ tglx: Simplified logic and clarified changelog ] Suggested-by: Thomas Gleixner <tglx@linutronix.de> Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Dou Liyang <douliyangs@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-pci@vger.kernel.org Cc: kashyap.desai@broadcom.com Cc: shivasharan.srikanteshwara@broadcom.com Cc: sumit.saxena@broadcom.com Cc: ming.lei@redhat.com Cc: hch@lst.de Cc: douliyang1@huawei.com Link: https://lkml.kernel.org/r/20181204155122.6327-2-douliyangs@gmail.com
2018-12-04 15:51:20 +00:00
int node, const struct irq_affinity_desc *affinity)
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
{
unsigned int hint;
if (virq >= 0) {
virq = __irq_alloc_descs(virq, virq, cnt, node, THIS_MODULE,
affinity);
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
} else {
hint = hwirq % nr_irqs;
if (hint == 0)
hint++;
virq = __irq_alloc_descs(-1, hint, cnt, node, THIS_MODULE,
affinity);
if (virq <= 0 && hint > 1) {
virq = __irq_alloc_descs(-1, 1, cnt, node, THIS_MODULE,
affinity);
}
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
}
return virq;
}
/**
* irq_domain_reset_irq_data - Clear hwirq, chip and chip_data in @irq_data
* @irq_data: The pointer to irq_data
*/
void irq_domain_reset_irq_data(struct irq_data *irq_data)
{
irq_data->hwirq = 0;
irq_data->chip = &no_irq_chip;
irq_data->chip_data = NULL;
}
EXPORT_SYMBOL_GPL(irq_domain_reset_irq_data);
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
/**
* irq_domain_create_hierarchy - Add a irqdomain into the hierarchy
* @parent: Parent irq domain to associate with the new domain
* @flags: Irq domain flags associated to the domain
* @size: Size of the domain. See below
* @fwnode: Optional fwnode of the interrupt controller
* @ops: Pointer to the interrupt domain callbacks
* @host_data: Controller private data pointer
*
* If @size is 0 a tree domain is created, otherwise a linear domain.
*
* If successful the parent is associated to the new domain and the
* domain flags are set.
* Returns pointer to IRQ domain, or NULL on failure.
*/
struct irq_domain *irq_domain_create_hierarchy(struct irq_domain *parent,
unsigned int flags,
unsigned int size,
struct fwnode_handle *fwnode,
const struct irq_domain_ops *ops,
void *host_data)
{
struct irq_domain *domain;
if (size)
domain = __irq_domain_create(fwnode, size, size, 0, ops, host_data);
else
domain = __irq_domain_create(fwnode, 0, ~0, 0, ops, host_data);
if (domain) {
if (parent)
domain->root = parent->root;
domain->parent = parent;
domain->flags |= flags;
__irq_domain_publish(domain);
}
return domain;
}
EXPORT_SYMBOL_GPL(irq_domain_create_hierarchy);
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
static void irq_domain_insert_irq(int virq)
{
struct irq_data *data;
for (data = irq_get_irq_data(virq); data; data = data->parent_data) {
struct irq_domain *domain = data->domain;
domain->mapcount++;
irq_domain_set_mapping(domain, data->hwirq, data);
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
}
irq_clear_status_flags(virq, IRQ_NOREQUEST);
}
static void irq_domain_remove_irq(int virq)
{
struct irq_data *data;
irq_set_status_flags(virq, IRQ_NOREQUEST);
irq_set_chip_and_handler(virq, NULL, NULL);
synchronize_irq(virq);
smp_mb();
for (data = irq_get_irq_data(virq); data; data = data->parent_data) {
struct irq_domain *domain = data->domain;
irq_hw_number_t hwirq = data->hwirq;
domain->mapcount--;
irq_domain_clear_mapping(domain, hwirq);
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
}
}
static struct irq_data *irq_domain_insert_irq_data(struct irq_domain *domain,
struct irq_data *child)
{
struct irq_data *irq_data;
irq_data = kzalloc_node(sizeof(*irq_data), GFP_KERNEL,
irq_data_get_node(child));
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
if (irq_data) {
child->parent_data = irq_data;
irq_data->irq = child->irq;
irq_data->common = child->common;
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
irq_data->domain = domain;
}
return irq_data;
}
static void __irq_domain_free_hierarchy(struct irq_data *irq_data)
{
struct irq_data *tmp;
while (irq_data) {
tmp = irq_data;
irq_data = irq_data->parent_data;
kfree(tmp);
}
}
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
static void irq_domain_free_irq_data(unsigned int virq, unsigned int nr_irqs)
{
struct irq_data *irq_data, *tmp;
int i;
for (i = 0; i < nr_irqs; i++) {
irq_data = irq_get_irq_data(virq + i);
tmp = irq_data->parent_data;
irq_data->parent_data = NULL;
irq_data->domain = NULL;
__irq_domain_free_hierarchy(tmp);
}
}
/**
* irq_domain_disconnect_hierarchy - Mark the first unused level of a hierarchy
* @domain: IRQ domain from which the hierarchy is to be disconnected
* @virq: IRQ number where the hierarchy is to be trimmed
*
* Marks the @virq level belonging to @domain as disconnected.
* Returns -EINVAL if @virq doesn't have a valid irq_data pointing
* to @domain.
*
* Its only use is to be able to trim levels of hierarchy that do not
* have any real meaning for this interrupt, and that the driver marks
* as such from its .alloc() callback.
*/
int irq_domain_disconnect_hierarchy(struct irq_domain *domain,
unsigned int virq)
{
struct irq_data *irqd;
irqd = irq_domain_get_irq_data(domain, virq);
if (!irqd)
return -EINVAL;
irqd->chip = ERR_PTR(-ENOTCONN);
return 0;
}
EXPORT_SYMBOL_GPL(irq_domain_disconnect_hierarchy);
static int irq_domain_trim_hierarchy(unsigned int virq)
{
struct irq_data *tail, *irqd, *irq_data;
irq_data = irq_get_irq_data(virq);
tail = NULL;
/* The first entry must have a valid irqchip */
if (!irq_data->chip || IS_ERR(irq_data->chip))
return -EINVAL;
/*
* Validate that the irq_data chain is sane in the presence of
* a hierarchy trimming marker.
*/
for (irqd = irq_data->parent_data; irqd; irq_data = irqd, irqd = irqd->parent_data) {
/* Can't have a valid irqchip after a trim marker */
if (irqd->chip && tail)
return -EINVAL;
/* Can't have an empty irqchip before a trim marker */
if (!irqd->chip && !tail)
return -EINVAL;
if (IS_ERR(irqd->chip)) {
/* Only -ENOTCONN is a valid trim marker */
if (PTR_ERR(irqd->chip) != -ENOTCONN)
return -EINVAL;
tail = irq_data;
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
}
}
/* No trim marker, nothing to do */
if (!tail)
return 0;
pr_info("IRQ%d: trimming hierarchy from %s\n",
virq, tail->parent_data->domain->name);
/* Sever the inner part of the hierarchy... */
irqd = tail;
tail = tail->parent_data;
irqd->parent_data = NULL;
__irq_domain_free_hierarchy(tail);
return 0;
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
}
static int irq_domain_alloc_irq_data(struct irq_domain *domain,
unsigned int virq, unsigned int nr_irqs)
{
struct irq_data *irq_data;
struct irq_domain *parent;
int i;
/* The outermost irq_data is embedded in struct irq_desc */
for (i = 0; i < nr_irqs; i++) {
irq_data = irq_get_irq_data(virq + i);
irq_data->domain = domain;
for (parent = domain->parent; parent; parent = parent->parent) {
irq_data = irq_domain_insert_irq_data(parent, irq_data);
if (!irq_data) {
irq_domain_free_irq_data(virq, i + 1);
return -ENOMEM;
}
}
}
return 0;
}
/**
* irq_domain_get_irq_data - Get irq_data associated with @virq and @domain
* @domain: domain to match
* @virq: IRQ number to get irq_data
*/
struct irq_data *irq_domain_get_irq_data(struct irq_domain *domain,
unsigned int virq)
{
struct irq_data *irq_data;
for (irq_data = irq_get_irq_data(virq); irq_data;
irq_data = irq_data->parent_data)
if (irq_data->domain == domain)
return irq_data;
return NULL;
}
EXPORT_SYMBOL_GPL(irq_domain_get_irq_data);
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
/**
* irq_domain_set_hwirq_and_chip - Set hwirq and irqchip of @virq at @domain
* @domain: Interrupt domain to match
* @virq: IRQ number
* @hwirq: The hwirq number
* @chip: The associated interrupt chip
* @chip_data: The associated chip data
*/
int irq_domain_set_hwirq_and_chip(struct irq_domain *domain, unsigned int virq,
irq_hw_number_t hwirq,
const struct irq_chip *chip,
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
void *chip_data)
{
struct irq_data *irq_data = irq_domain_get_irq_data(domain, virq);
if (!irq_data)
return -ENOENT;
irq_data->hwirq = hwirq;
irq_data->chip = (struct irq_chip *)(chip ? chip : &no_irq_chip);
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
irq_data->chip_data = chip_data;
return 0;
}
EXPORT_SYMBOL_GPL(irq_domain_set_hwirq_and_chip);
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
/**
* irq_domain_set_info - Set the complete data for a @virq in @domain
* @domain: Interrupt domain to match
* @virq: IRQ number
* @hwirq: The hardware interrupt number
* @chip: The associated interrupt chip
* @chip_data: The associated interrupt chip data
* @handler: The interrupt flow handler
* @handler_data: The interrupt flow handler data
* @handler_name: The interrupt handler name
*/
void irq_domain_set_info(struct irq_domain *domain, unsigned int virq,
irq_hw_number_t hwirq, const struct irq_chip *chip,
void *chip_data, irq_flow_handler_t handler,
void *handler_data, const char *handler_name)
{
irq_domain_set_hwirq_and_chip(domain, virq, hwirq, chip, chip_data);
__irq_set_handler(virq, handler, 0, handler_name);
irq_set_handler_data(virq, handler_data);
}
EXPORT_SYMBOL(irq_domain_set_info);
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
/**
* irq_domain_free_irqs_common - Clear irq_data and free the parent
* @domain: Interrupt domain to match
* @virq: IRQ number to start with
* @nr_irqs: The number of irqs to free
*/
void irq_domain_free_irqs_common(struct irq_domain *domain, unsigned int virq,
unsigned int nr_irqs)
{
struct irq_data *irq_data;
int i;
for (i = 0; i < nr_irqs; i++) {
irq_data = irq_domain_get_irq_data(domain, virq + i);
if (irq_data)
irq_domain_reset_irq_data(irq_data);
}
irq_domain_free_irqs_parent(domain, virq, nr_irqs);
}
EXPORT_SYMBOL_GPL(irq_domain_free_irqs_common);
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
/**
* irq_domain_free_irqs_top - Clear handler and handler data, clear irqdata and free parent
* @domain: Interrupt domain to match
* @virq: IRQ number to start with
* @nr_irqs: The number of irqs to free
*/
void irq_domain_free_irqs_top(struct irq_domain *domain, unsigned int virq,
unsigned int nr_irqs)
{
int i;
for (i = 0; i < nr_irqs; i++) {
irq_set_handler_data(virq + i, NULL);
irq_set_handler(virq + i, NULL);
}
irq_domain_free_irqs_common(domain, virq, nr_irqs);
}
static void irq_domain_free_irqs_hierarchy(struct irq_domain *domain,
unsigned int irq_base,
unsigned int nr_irqs)
{
unsigned int i;
if (!domain->ops->free)
return;
for (i = 0; i < nr_irqs; i++) {
if (irq_domain_get_irq_data(domain, irq_base + i))
domain->ops->free(domain, irq_base + i, 1);
}
}
int irq_domain_alloc_irqs_hierarchy(struct irq_domain *domain,
unsigned int irq_base,
unsigned int nr_irqs, void *arg)
{
if (!domain->ops->alloc) {
pr_debug("domain->ops->alloc() is NULL\n");
return -ENOSYS;
}
return domain->ops->alloc(domain, irq_base, nr_irqs, arg);
}
static int irq_domain_alloc_irqs_locked(struct irq_domain *domain, int irq_base,
unsigned int nr_irqs, int node, void *arg,
bool realloc, const struct irq_affinity_desc *affinity)
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
{
int i, ret, virq;
if (realloc && irq_base >= 0) {
virq = irq_base;
} else {
virq = irq_domain_alloc_descs(irq_base, nr_irqs, 0, node,
affinity);
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
if (virq < 0) {
pr_debug("cannot allocate IRQ(base %d, count %d)\n",
irq_base, nr_irqs);
return virq;
}
}
if (irq_domain_alloc_irq_data(domain, virq, nr_irqs)) {
pr_debug("cannot allocate memory for IRQ%d\n", virq);
ret = -ENOMEM;
goto out_free_desc;
}
ret = irq_domain_alloc_irqs_hierarchy(domain, virq, nr_irqs, arg);
if (ret < 0)
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
goto out_free_irq_data;
for (i = 0; i < nr_irqs; i++) {
ret = irq_domain_trim_hierarchy(virq + i);
if (ret)
goto out_free_irq_data;
}
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
for (i = 0; i < nr_irqs; i++)
irq_domain_insert_irq(virq + i);
return virq;
out_free_irq_data:
irq_domain_free_irq_data(virq, nr_irqs);
out_free_desc:
irq_free_descs(virq, nr_irqs);
return ret;
}
/**
* __irq_domain_alloc_irqs - Allocate IRQs from domain
* @domain: domain to allocate from
* @irq_base: allocate specified IRQ number if irq_base >= 0
* @nr_irqs: number of IRQs to allocate
* @node: NUMA node id for memory allocation
* @arg: domain specific argument
* @realloc: IRQ descriptors have already been allocated if true
* @affinity: Optional irq affinity mask for multiqueue devices
*
* Allocate IRQ numbers and initialized all data structures to support
* hierarchy IRQ domains.
* Parameter @realloc is mainly to support legacy IRQs.
* Returns error code or allocated IRQ number
*
* The whole process to setup an IRQ has been split into two steps.
* The first step, __irq_domain_alloc_irqs(), is to allocate IRQ
* descriptor and required hardware resources. The second step,
* irq_domain_activate_irq(), is to program the hardware with preallocated
* resources. In this way, it's easier to rollback when failing to
* allocate resources.
*/
int __irq_domain_alloc_irqs(struct irq_domain *domain, int irq_base,
unsigned int nr_irqs, int node, void *arg,
bool realloc, const struct irq_affinity_desc *affinity)
{
int ret;
if (domain == NULL) {
domain = irq_default_domain;
if (WARN(!domain, "domain is NULL; cannot allocate IRQ\n"))
return -EINVAL;
}
mutex_lock(&domain->root->mutex);
ret = irq_domain_alloc_irqs_locked(domain, irq_base, nr_irqs, node, arg,
realloc, affinity);
mutex_unlock(&domain->root->mutex);
return ret;
}
EXPORT_SYMBOL_GPL(__irq_domain_alloc_irqs);
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
/* The irq_data was moved, fix the revmap to refer to the new location */
static void irq_domain_fix_revmap(struct irq_data *d)
{
void __rcu **slot;
lockdep_assert_held(&d->domain->root->mutex);
if (irq_domain_is_nomap(d->domain))
return;
/* Fix up the revmap. */
if (d->hwirq < d->domain->revmap_size) {
/* Not using radix tree */
rcu_assign_pointer(d->domain->revmap[d->hwirq], d);
} else {
slot = radix_tree_lookup_slot(&d->domain->revmap_tree, d->hwirq);
if (slot)
radix_tree_replace_slot(&d->domain->revmap_tree, slot, d);
}
}
/**
* irq_domain_push_irq() - Push a domain in to the top of a hierarchy.
* @domain: Domain to push.
* @virq: Irq to push the domain in to.
* @arg: Passed to the irq_domain_ops alloc() function.
*
* For an already existing irqdomain hierarchy, as might be obtained
* via a call to pci_enable_msix(), add an additional domain to the
* head of the processing chain. Must be called before request_irq()
* has been called.
*/
int irq_domain_push_irq(struct irq_domain *domain, int virq, void *arg)
{
struct irq_data *irq_data = irq_get_irq_data(virq);
struct irq_data *parent_irq_data;
struct irq_desc *desc;
int rv = 0;
/*
* Check that no action has been set, which indicates the virq
* is in a state where this function doesn't have to deal with
* races between interrupt handling and maintaining the
* hierarchy. This will catch gross misuse. Attempting to
* make the check race free would require holding locks across
* calls to struct irq_domain_ops->alloc(), which could lead
* to deadlock, so we just do a simple check before starting.
*/
desc = irq_to_desc(virq);
if (!desc)
return -EINVAL;
if (WARN_ON(desc->action))
return -EBUSY;
if (domain == NULL)
return -EINVAL;
if (WARN_ON(!irq_domain_is_hierarchy(domain)))
return -EINVAL;
if (!irq_data)
return -EINVAL;
if (domain->parent != irq_data->domain)
return -EINVAL;
parent_irq_data = kzalloc_node(sizeof(*parent_irq_data), GFP_KERNEL,
irq_data_get_node(irq_data));
if (!parent_irq_data)
return -ENOMEM;
mutex_lock(&domain->root->mutex);
/* Copy the original irq_data. */
*parent_irq_data = *irq_data;
/*
* Overwrite the irq_data, which is embedded in struct irq_desc, with
* values for this domain.
*/
irq_data->parent_data = parent_irq_data;
irq_data->domain = domain;
irq_data->mask = 0;
irq_data->hwirq = 0;
irq_data->chip = NULL;
irq_data->chip_data = NULL;
/* May (probably does) set hwirq, chip, etc. */
rv = irq_domain_alloc_irqs_hierarchy(domain, virq, 1, arg);
if (rv) {
/* Restore the original irq_data. */
*irq_data = *parent_irq_data;
kfree(parent_irq_data);
goto error;
}
irq_domain_fix_revmap(parent_irq_data);
irq_domain_set_mapping(domain, irq_data->hwirq, irq_data);
error:
mutex_unlock(&domain->root->mutex);
return rv;
}
EXPORT_SYMBOL_GPL(irq_domain_push_irq);
/**
* irq_domain_pop_irq() - Remove a domain from the top of a hierarchy.
* @domain: Domain to remove.
* @virq: Irq to remove the domain from.
*
* Undo the effects of a call to irq_domain_push_irq(). Must be
* called either before request_irq() or after free_irq().
*/
int irq_domain_pop_irq(struct irq_domain *domain, int virq)
{
struct irq_data *irq_data = irq_get_irq_data(virq);
struct irq_data *parent_irq_data;
struct irq_data *tmp_irq_data;
struct irq_desc *desc;
/*
* Check that no action is set, which indicates the virq is in
* a state where this function doesn't have to deal with races
* between interrupt handling and maintaining the hierarchy.
* This will catch gross misuse. Attempting to make the check
* race free would require holding locks across calls to
* struct irq_domain_ops->free(), which could lead to
* deadlock, so we just do a simple check before starting.
*/
desc = irq_to_desc(virq);
if (!desc)
return -EINVAL;
if (WARN_ON(desc->action))
return -EBUSY;
if (domain == NULL)
return -EINVAL;
if (!irq_data)
return -EINVAL;
tmp_irq_data = irq_domain_get_irq_data(domain, virq);
/* We can only "pop" if this domain is at the top of the list */
if (WARN_ON(irq_data != tmp_irq_data))
return -EINVAL;
if (WARN_ON(irq_data->domain != domain))
return -EINVAL;
parent_irq_data = irq_data->parent_data;
if (WARN_ON(!parent_irq_data))
return -EINVAL;
mutex_lock(&domain->root->mutex);
irq_data->parent_data = NULL;
irq_domain_clear_mapping(domain, irq_data->hwirq);
irq_domain_free_irqs_hierarchy(domain, virq, 1);
/* Restore the original irq_data. */
*irq_data = *parent_irq_data;
irq_domain_fix_revmap(irq_data);
mutex_unlock(&domain->root->mutex);
kfree(parent_irq_data);
return 0;
}
EXPORT_SYMBOL_GPL(irq_domain_pop_irq);
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
/**
* irq_domain_free_irqs - Free IRQ number and associated data structures
* @virq: base IRQ number
* @nr_irqs: number of IRQs to free
*/
void irq_domain_free_irqs(unsigned int virq, unsigned int nr_irqs)
{
struct irq_data *data = irq_get_irq_data(virq);
struct irq_domain *domain;
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
int i;
if (WARN(!data || !data->domain || !data->domain->ops->free,
"NULL pointer, cannot free irq\n"))
return;
domain = data->domain;
mutex_lock(&domain->root->mutex);
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
for (i = 0; i < nr_irqs; i++)
irq_domain_remove_irq(virq + i);
irq_domain_free_irqs_hierarchy(domain, virq, nr_irqs);
mutex_unlock(&domain->root->mutex);
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
irq_domain_free_irq_data(virq, nr_irqs);
irq_free_descs(virq, nr_irqs);
}
/**
* irq_domain_alloc_irqs_parent - Allocate interrupts from parent domain
* @domain: Domain below which interrupts must be allocated
* @irq_base: Base IRQ number
* @nr_irqs: Number of IRQs to allocate
* @arg: Allocation data (arch/domain specific)
*/
int irq_domain_alloc_irqs_parent(struct irq_domain *domain,
unsigned int irq_base, unsigned int nr_irqs,
void *arg)
{
if (!domain->parent)
return -ENOSYS;
return irq_domain_alloc_irqs_hierarchy(domain->parent, irq_base,
nr_irqs, arg);
}
EXPORT_SYMBOL_GPL(irq_domain_alloc_irqs_parent);
/**
* irq_domain_free_irqs_parent - Free interrupts from parent domain
* @domain: Domain below which interrupts must be freed
* @irq_base: Base IRQ number
* @nr_irqs: Number of IRQs to free
*/
void irq_domain_free_irqs_parent(struct irq_domain *domain,
unsigned int irq_base, unsigned int nr_irqs)
{
if (!domain->parent)
return;
irq_domain_free_irqs_hierarchy(domain->parent, irq_base, nr_irqs);
}
EXPORT_SYMBOL_GPL(irq_domain_free_irqs_parent);
static void __irq_domain_deactivate_irq(struct irq_data *irq_data)
{
if (irq_data && irq_data->domain) {
struct irq_domain *domain = irq_data->domain;
if (domain->ops->deactivate)
domain->ops->deactivate(domain, irq_data);
if (irq_data->parent_data)
__irq_domain_deactivate_irq(irq_data->parent_data);
}
}
static int __irq_domain_activate_irq(struct irq_data *irqd, bool reserve)
{
int ret = 0;
if (irqd && irqd->domain) {
struct irq_domain *domain = irqd->domain;
if (irqd->parent_data)
ret = __irq_domain_activate_irq(irqd->parent_data,
reserve);
if (!ret && domain->ops->activate) {
ret = domain->ops->activate(domain, irqd, reserve);
/* Rollback in case of error */
if (ret && irqd->parent_data)
__irq_domain_deactivate_irq(irqd->parent_data);
}
}
return ret;
}
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
/**
* irq_domain_activate_irq - Call domain_ops->activate recursively to activate
* interrupt
* @irq_data: Outermost irq_data associated with interrupt
* @reserve: If set only reserve an interrupt vector instead of assigning one
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
*
* This is the second step to call domain_ops->activate to program interrupt
* controllers, so the interrupt could actually get delivered.
*/
int irq_domain_activate_irq(struct irq_data *irq_data, bool reserve)
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
{
int ret = 0;
if (!irqd_is_activated(irq_data))
ret = __irq_domain_activate_irq(irq_data, reserve);
if (!ret)
irqd_set_activated(irq_data);
return ret;
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
}
/**
* irq_domain_deactivate_irq - Call domain_ops->deactivate recursively to
* deactivate interrupt
* @irq_data: outermost irq_data associated with interrupt
*
* It calls domain_ops->deactivate to program interrupt controllers to disable
* interrupt delivery.
*/
void irq_domain_deactivate_irq(struct irq_data *irq_data)
{
if (irqd_is_activated(irq_data)) {
__irq_domain_deactivate_irq(irq_data);
irqd_clr_activated(irq_data);
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
}
}
static void irq_domain_check_hierarchy(struct irq_domain *domain)
{
/* Hierarchy irq_domains must implement callback alloc() */
if (domain->ops->alloc)
domain->flags |= IRQ_DOMAIN_FLAG_HIERARCHY;
}
#else /* CONFIG_IRQ_DOMAIN_HIERARCHY */
/**
* irq_domain_get_irq_data - Get irq_data associated with @virq and @domain
* @domain: domain to match
* @virq: IRQ number to get irq_data
*/
struct irq_data *irq_domain_get_irq_data(struct irq_domain *domain,
unsigned int virq)
{
struct irq_data *irq_data = irq_get_irq_data(virq);
return (irq_data && irq_data->domain == domain) ? irq_data : NULL;
}
EXPORT_SYMBOL_GPL(irq_domain_get_irq_data);
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
/**
* irq_domain_set_info - Set the complete data for a @virq in @domain
* @domain: Interrupt domain to match
* @virq: IRQ number
* @hwirq: The hardware interrupt number
* @chip: The associated interrupt chip
* @chip_data: The associated interrupt chip data
* @handler: The interrupt flow handler
* @handler_data: The interrupt flow handler data
* @handler_name: The interrupt handler name
*/
void irq_domain_set_info(struct irq_domain *domain, unsigned int virq,
irq_hw_number_t hwirq, const struct irq_chip *chip,
void *chip_data, irq_flow_handler_t handler,
void *handler_data, const char *handler_name)
{
irq_set_chip_and_handler_name(virq, chip, handler, handler_name);
irq_set_chip_data(virq, chip_data);
irq_set_handler_data(virq, handler_data);
}
static int irq_domain_alloc_irqs_locked(struct irq_domain *domain, int irq_base,
unsigned int nr_irqs, int node, void *arg,
bool realloc, const struct irq_affinity_desc *affinity)
{
return -EINVAL;
}
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
static void irq_domain_check_hierarchy(struct irq_domain *domain)
{
}
#endif /* CONFIG_IRQ_DOMAIN_HIERARCHY */
genirq/debugfs: Add proper debugfs interface Debugging (hierarchical) interupt domains is tedious as there is no information about the hierarchy and no information about states of interrupts in the various domain levels. Add a debugfs directory 'irq' and subdirectories 'domains' and 'irqs'. The domains directory contains the domain files. The content is information about the domain. If the domain is part of a hierarchy then the parent domains are printed as well. # ls /sys/kernel/debug/irq/domains/ default INTEL-IR-2 INTEL-IR-MSI-2 IO-APIC-IR-2 PCI-MSI DMAR-MSI INTEL-IR-3 INTEL-IR-MSI-3 IO-APIC-IR-3 unknown-1 INTEL-IR-0 INTEL-IR-MSI-0 IO-APIC-IR-0 IO-APIC-IR-4 VECTOR INTEL-IR-1 INTEL-IR-MSI-1 IO-APIC-IR-1 PCI-HT # cat /sys/kernel/debug/irq/domains/VECTOR name: VECTOR size: 0 mapped: 216 flags: 0x00000041 # cat /sys/kernel/debug/irq/domains/IO-APIC-IR-0 name: IO-APIC-IR-0 size: 24 mapped: 19 flags: 0x00000041 parent: INTEL-IR-3 name: INTEL-IR-3 size: 65536 mapped: 167 flags: 0x00000041 parent: VECTOR name: VECTOR size: 0 mapped: 216 flags: 0x00000041 Unfortunately there is no per cpu information about the VECTOR domain (yet). The irqs directory contains detailed information about mapped interrupts. # cat /sys/kernel/debug/irq/irqs/3 handler: handle_edge_irq status: 0x00004000 istate: 0x00000000 ddepth: 1 wdepth: 0 dstate: 0x01018000 IRQD_IRQ_DISABLED IRQD_SINGLE_TARGET IRQD_MOVE_PCNTXT node: 0 affinity: 0-143 effectiv: 0 pending: domain: IO-APIC-IR-0 hwirq: 0x3 chip: IR-IO-APIC flags: 0x10 IRQCHIP_SKIP_SET_WAKE parent: domain: INTEL-IR-3 hwirq: 0x20000 chip: INTEL-IR flags: 0x0 parent: domain: VECTOR hwirq: 0x3 chip: APIC flags: 0x0 This was developed to simplify the debugging of the managed affinity changes. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20170619235444.537566163@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-06-19 23:37:17 +00:00
#ifdef CONFIG_GENERIC_IRQ_DEBUGFS
#include "internals.h"
genirq/debugfs: Add proper debugfs interface Debugging (hierarchical) interupt domains is tedious as there is no information about the hierarchy and no information about states of interrupts in the various domain levels. Add a debugfs directory 'irq' and subdirectories 'domains' and 'irqs'. The domains directory contains the domain files. The content is information about the domain. If the domain is part of a hierarchy then the parent domains are printed as well. # ls /sys/kernel/debug/irq/domains/ default INTEL-IR-2 INTEL-IR-MSI-2 IO-APIC-IR-2 PCI-MSI DMAR-MSI INTEL-IR-3 INTEL-IR-MSI-3 IO-APIC-IR-3 unknown-1 INTEL-IR-0 INTEL-IR-MSI-0 IO-APIC-IR-0 IO-APIC-IR-4 VECTOR INTEL-IR-1 INTEL-IR-MSI-1 IO-APIC-IR-1 PCI-HT # cat /sys/kernel/debug/irq/domains/VECTOR name: VECTOR size: 0 mapped: 216 flags: 0x00000041 # cat /sys/kernel/debug/irq/domains/IO-APIC-IR-0 name: IO-APIC-IR-0 size: 24 mapped: 19 flags: 0x00000041 parent: INTEL-IR-3 name: INTEL-IR-3 size: 65536 mapped: 167 flags: 0x00000041 parent: VECTOR name: VECTOR size: 0 mapped: 216 flags: 0x00000041 Unfortunately there is no per cpu information about the VECTOR domain (yet). The irqs directory contains detailed information about mapped interrupts. # cat /sys/kernel/debug/irq/irqs/3 handler: handle_edge_irq status: 0x00004000 istate: 0x00000000 ddepth: 1 wdepth: 0 dstate: 0x01018000 IRQD_IRQ_DISABLED IRQD_SINGLE_TARGET IRQD_MOVE_PCNTXT node: 0 affinity: 0-143 effectiv: 0 pending: domain: IO-APIC-IR-0 hwirq: 0x3 chip: IR-IO-APIC flags: 0x10 IRQCHIP_SKIP_SET_WAKE parent: domain: INTEL-IR-3 hwirq: 0x20000 chip: INTEL-IR flags: 0x0 parent: domain: VECTOR hwirq: 0x3 chip: APIC flags: 0x0 This was developed to simplify the debugging of the managed affinity changes. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20170619235444.537566163@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-06-19 23:37:17 +00:00
static struct dentry *domain_dir;
static void
irq_domain_debug_show_one(struct seq_file *m, struct irq_domain *d, int ind)
{
seq_printf(m, "%*sname: %s\n", ind, "", d->name);
seq_printf(m, "%*ssize: %u\n", ind + 1, "", d->revmap_size);
genirq/debugfs: Add proper debugfs interface Debugging (hierarchical) interupt domains is tedious as there is no information about the hierarchy and no information about states of interrupts in the various domain levels. Add a debugfs directory 'irq' and subdirectories 'domains' and 'irqs'. The domains directory contains the domain files. The content is information about the domain. If the domain is part of a hierarchy then the parent domains are printed as well. # ls /sys/kernel/debug/irq/domains/ default INTEL-IR-2 INTEL-IR-MSI-2 IO-APIC-IR-2 PCI-MSI DMAR-MSI INTEL-IR-3 INTEL-IR-MSI-3 IO-APIC-IR-3 unknown-1 INTEL-IR-0 INTEL-IR-MSI-0 IO-APIC-IR-0 IO-APIC-IR-4 VECTOR INTEL-IR-1 INTEL-IR-MSI-1 IO-APIC-IR-1 PCI-HT # cat /sys/kernel/debug/irq/domains/VECTOR name: VECTOR size: 0 mapped: 216 flags: 0x00000041 # cat /sys/kernel/debug/irq/domains/IO-APIC-IR-0 name: IO-APIC-IR-0 size: 24 mapped: 19 flags: 0x00000041 parent: INTEL-IR-3 name: INTEL-IR-3 size: 65536 mapped: 167 flags: 0x00000041 parent: VECTOR name: VECTOR size: 0 mapped: 216 flags: 0x00000041 Unfortunately there is no per cpu information about the VECTOR domain (yet). The irqs directory contains detailed information about mapped interrupts. # cat /sys/kernel/debug/irq/irqs/3 handler: handle_edge_irq status: 0x00004000 istate: 0x00000000 ddepth: 1 wdepth: 0 dstate: 0x01018000 IRQD_IRQ_DISABLED IRQD_SINGLE_TARGET IRQD_MOVE_PCNTXT node: 0 affinity: 0-143 effectiv: 0 pending: domain: IO-APIC-IR-0 hwirq: 0x3 chip: IR-IO-APIC flags: 0x10 IRQCHIP_SKIP_SET_WAKE parent: domain: INTEL-IR-3 hwirq: 0x20000 chip: INTEL-IR flags: 0x0 parent: domain: VECTOR hwirq: 0x3 chip: APIC flags: 0x0 This was developed to simplify the debugging of the managed affinity changes. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20170619235444.537566163@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-06-19 23:37:17 +00:00
seq_printf(m, "%*smapped: %u\n", ind + 1, "", d->mapcount);
seq_printf(m, "%*sflags: 0x%08x\n", ind +1 , "", d->flags);
if (d->ops && d->ops->debug_show)
d->ops->debug_show(m, d, NULL, ind + 1);
genirq/debugfs: Add proper debugfs interface Debugging (hierarchical) interupt domains is tedious as there is no information about the hierarchy and no information about states of interrupts in the various domain levels. Add a debugfs directory 'irq' and subdirectories 'domains' and 'irqs'. The domains directory contains the domain files. The content is information about the domain. If the domain is part of a hierarchy then the parent domains are printed as well. # ls /sys/kernel/debug/irq/domains/ default INTEL-IR-2 INTEL-IR-MSI-2 IO-APIC-IR-2 PCI-MSI DMAR-MSI INTEL-IR-3 INTEL-IR-MSI-3 IO-APIC-IR-3 unknown-1 INTEL-IR-0 INTEL-IR-MSI-0 IO-APIC-IR-0 IO-APIC-IR-4 VECTOR INTEL-IR-1 INTEL-IR-MSI-1 IO-APIC-IR-1 PCI-HT # cat /sys/kernel/debug/irq/domains/VECTOR name: VECTOR size: 0 mapped: 216 flags: 0x00000041 # cat /sys/kernel/debug/irq/domains/IO-APIC-IR-0 name: IO-APIC-IR-0 size: 24 mapped: 19 flags: 0x00000041 parent: INTEL-IR-3 name: INTEL-IR-3 size: 65536 mapped: 167 flags: 0x00000041 parent: VECTOR name: VECTOR size: 0 mapped: 216 flags: 0x00000041 Unfortunately there is no per cpu information about the VECTOR domain (yet). The irqs directory contains detailed information about mapped interrupts. # cat /sys/kernel/debug/irq/irqs/3 handler: handle_edge_irq status: 0x00004000 istate: 0x00000000 ddepth: 1 wdepth: 0 dstate: 0x01018000 IRQD_IRQ_DISABLED IRQD_SINGLE_TARGET IRQD_MOVE_PCNTXT node: 0 affinity: 0-143 effectiv: 0 pending: domain: IO-APIC-IR-0 hwirq: 0x3 chip: IR-IO-APIC flags: 0x10 IRQCHIP_SKIP_SET_WAKE parent: domain: INTEL-IR-3 hwirq: 0x20000 chip: INTEL-IR flags: 0x0 parent: domain: VECTOR hwirq: 0x3 chip: APIC flags: 0x0 This was developed to simplify the debugging of the managed affinity changes. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20170619235444.537566163@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-06-19 23:37:17 +00:00
#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
if (!d->parent)
return;
seq_printf(m, "%*sparent: %s\n", ind + 1, "", d->parent->name);
irq_domain_debug_show_one(m, d->parent, ind + 4);
#endif
}
static int irq_domain_debug_show(struct seq_file *m, void *p)
{
struct irq_domain *d = m->private;
/* Default domain? Might be NULL */
if (!d) {
if (!irq_default_domain)
return 0;
d = irq_default_domain;
}
irq_domain_debug_show_one(m, d, 0);
return 0;
}
DEFINE_SHOW_ATTRIBUTE(irq_domain_debug);
genirq/debugfs: Add proper debugfs interface Debugging (hierarchical) interupt domains is tedious as there is no information about the hierarchy and no information about states of interrupts in the various domain levels. Add a debugfs directory 'irq' and subdirectories 'domains' and 'irqs'. The domains directory contains the domain files. The content is information about the domain. If the domain is part of a hierarchy then the parent domains are printed as well. # ls /sys/kernel/debug/irq/domains/ default INTEL-IR-2 INTEL-IR-MSI-2 IO-APIC-IR-2 PCI-MSI DMAR-MSI INTEL-IR-3 INTEL-IR-MSI-3 IO-APIC-IR-3 unknown-1 INTEL-IR-0 INTEL-IR-MSI-0 IO-APIC-IR-0 IO-APIC-IR-4 VECTOR INTEL-IR-1 INTEL-IR-MSI-1 IO-APIC-IR-1 PCI-HT # cat /sys/kernel/debug/irq/domains/VECTOR name: VECTOR size: 0 mapped: 216 flags: 0x00000041 # cat /sys/kernel/debug/irq/domains/IO-APIC-IR-0 name: IO-APIC-IR-0 size: 24 mapped: 19 flags: 0x00000041 parent: INTEL-IR-3 name: INTEL-IR-3 size: 65536 mapped: 167 flags: 0x00000041 parent: VECTOR name: VECTOR size: 0 mapped: 216 flags: 0x00000041 Unfortunately there is no per cpu information about the VECTOR domain (yet). The irqs directory contains detailed information about mapped interrupts. # cat /sys/kernel/debug/irq/irqs/3 handler: handle_edge_irq status: 0x00004000 istate: 0x00000000 ddepth: 1 wdepth: 0 dstate: 0x01018000 IRQD_IRQ_DISABLED IRQD_SINGLE_TARGET IRQD_MOVE_PCNTXT node: 0 affinity: 0-143 effectiv: 0 pending: domain: IO-APIC-IR-0 hwirq: 0x3 chip: IR-IO-APIC flags: 0x10 IRQCHIP_SKIP_SET_WAKE parent: domain: INTEL-IR-3 hwirq: 0x20000 chip: INTEL-IR flags: 0x0 parent: domain: VECTOR hwirq: 0x3 chip: APIC flags: 0x0 This was developed to simplify the debugging of the managed affinity changes. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20170619235444.537566163@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-06-19 23:37:17 +00:00
static void debugfs_add_domain_dir(struct irq_domain *d)
{
if (!d->name || !domain_dir)
genirq/debugfs: Add proper debugfs interface Debugging (hierarchical) interupt domains is tedious as there is no information about the hierarchy and no information about states of interrupts in the various domain levels. Add a debugfs directory 'irq' and subdirectories 'domains' and 'irqs'. The domains directory contains the domain files. The content is information about the domain. If the domain is part of a hierarchy then the parent domains are printed as well. # ls /sys/kernel/debug/irq/domains/ default INTEL-IR-2 INTEL-IR-MSI-2 IO-APIC-IR-2 PCI-MSI DMAR-MSI INTEL-IR-3 INTEL-IR-MSI-3 IO-APIC-IR-3 unknown-1 INTEL-IR-0 INTEL-IR-MSI-0 IO-APIC-IR-0 IO-APIC-IR-4 VECTOR INTEL-IR-1 INTEL-IR-MSI-1 IO-APIC-IR-1 PCI-HT # cat /sys/kernel/debug/irq/domains/VECTOR name: VECTOR size: 0 mapped: 216 flags: 0x00000041 # cat /sys/kernel/debug/irq/domains/IO-APIC-IR-0 name: IO-APIC-IR-0 size: 24 mapped: 19 flags: 0x00000041 parent: INTEL-IR-3 name: INTEL-IR-3 size: 65536 mapped: 167 flags: 0x00000041 parent: VECTOR name: VECTOR size: 0 mapped: 216 flags: 0x00000041 Unfortunately there is no per cpu information about the VECTOR domain (yet). The irqs directory contains detailed information about mapped interrupts. # cat /sys/kernel/debug/irq/irqs/3 handler: handle_edge_irq status: 0x00004000 istate: 0x00000000 ddepth: 1 wdepth: 0 dstate: 0x01018000 IRQD_IRQ_DISABLED IRQD_SINGLE_TARGET IRQD_MOVE_PCNTXT node: 0 affinity: 0-143 effectiv: 0 pending: domain: IO-APIC-IR-0 hwirq: 0x3 chip: IR-IO-APIC flags: 0x10 IRQCHIP_SKIP_SET_WAKE parent: domain: INTEL-IR-3 hwirq: 0x20000 chip: INTEL-IR flags: 0x0 parent: domain: VECTOR hwirq: 0x3 chip: APIC flags: 0x0 This was developed to simplify the debugging of the managed affinity changes. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20170619235444.537566163@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-06-19 23:37:17 +00:00
return;
debugfs_create_file(d->name, 0444, domain_dir, d,
&irq_domain_debug_fops);
genirq/debugfs: Add proper debugfs interface Debugging (hierarchical) interupt domains is tedious as there is no information about the hierarchy and no information about states of interrupts in the various domain levels. Add a debugfs directory 'irq' and subdirectories 'domains' and 'irqs'. The domains directory contains the domain files. The content is information about the domain. If the domain is part of a hierarchy then the parent domains are printed as well. # ls /sys/kernel/debug/irq/domains/ default INTEL-IR-2 INTEL-IR-MSI-2 IO-APIC-IR-2 PCI-MSI DMAR-MSI INTEL-IR-3 INTEL-IR-MSI-3 IO-APIC-IR-3 unknown-1 INTEL-IR-0 INTEL-IR-MSI-0 IO-APIC-IR-0 IO-APIC-IR-4 VECTOR INTEL-IR-1 INTEL-IR-MSI-1 IO-APIC-IR-1 PCI-HT # cat /sys/kernel/debug/irq/domains/VECTOR name: VECTOR size: 0 mapped: 216 flags: 0x00000041 # cat /sys/kernel/debug/irq/domains/IO-APIC-IR-0 name: IO-APIC-IR-0 size: 24 mapped: 19 flags: 0x00000041 parent: INTEL-IR-3 name: INTEL-IR-3 size: 65536 mapped: 167 flags: 0x00000041 parent: VECTOR name: VECTOR size: 0 mapped: 216 flags: 0x00000041 Unfortunately there is no per cpu information about the VECTOR domain (yet). The irqs directory contains detailed information about mapped interrupts. # cat /sys/kernel/debug/irq/irqs/3 handler: handle_edge_irq status: 0x00004000 istate: 0x00000000 ddepth: 1 wdepth: 0 dstate: 0x01018000 IRQD_IRQ_DISABLED IRQD_SINGLE_TARGET IRQD_MOVE_PCNTXT node: 0 affinity: 0-143 effectiv: 0 pending: domain: IO-APIC-IR-0 hwirq: 0x3 chip: IR-IO-APIC flags: 0x10 IRQCHIP_SKIP_SET_WAKE parent: domain: INTEL-IR-3 hwirq: 0x20000 chip: INTEL-IR flags: 0x0 parent: domain: VECTOR hwirq: 0x3 chip: APIC flags: 0x0 This was developed to simplify the debugging of the managed affinity changes. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20170619235444.537566163@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-06-19 23:37:17 +00:00
}
static void debugfs_remove_domain_dir(struct irq_domain *d)
{
debugfs_lookup_and_remove(d->name, domain_dir);
genirq/debugfs: Add proper debugfs interface Debugging (hierarchical) interupt domains is tedious as there is no information about the hierarchy and no information about states of interrupts in the various domain levels. Add a debugfs directory 'irq' and subdirectories 'domains' and 'irqs'. The domains directory contains the domain files. The content is information about the domain. If the domain is part of a hierarchy then the parent domains are printed as well. # ls /sys/kernel/debug/irq/domains/ default INTEL-IR-2 INTEL-IR-MSI-2 IO-APIC-IR-2 PCI-MSI DMAR-MSI INTEL-IR-3 INTEL-IR-MSI-3 IO-APIC-IR-3 unknown-1 INTEL-IR-0 INTEL-IR-MSI-0 IO-APIC-IR-0 IO-APIC-IR-4 VECTOR INTEL-IR-1 INTEL-IR-MSI-1 IO-APIC-IR-1 PCI-HT # cat /sys/kernel/debug/irq/domains/VECTOR name: VECTOR size: 0 mapped: 216 flags: 0x00000041 # cat /sys/kernel/debug/irq/domains/IO-APIC-IR-0 name: IO-APIC-IR-0 size: 24 mapped: 19 flags: 0x00000041 parent: INTEL-IR-3 name: INTEL-IR-3 size: 65536 mapped: 167 flags: 0x00000041 parent: VECTOR name: VECTOR size: 0 mapped: 216 flags: 0x00000041 Unfortunately there is no per cpu information about the VECTOR domain (yet). The irqs directory contains detailed information about mapped interrupts. # cat /sys/kernel/debug/irq/irqs/3 handler: handle_edge_irq status: 0x00004000 istate: 0x00000000 ddepth: 1 wdepth: 0 dstate: 0x01018000 IRQD_IRQ_DISABLED IRQD_SINGLE_TARGET IRQD_MOVE_PCNTXT node: 0 affinity: 0-143 effectiv: 0 pending: domain: IO-APIC-IR-0 hwirq: 0x3 chip: IR-IO-APIC flags: 0x10 IRQCHIP_SKIP_SET_WAKE parent: domain: INTEL-IR-3 hwirq: 0x20000 chip: INTEL-IR flags: 0x0 parent: domain: VECTOR hwirq: 0x3 chip: APIC flags: 0x0 This was developed to simplify the debugging of the managed affinity changes. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20170619235444.537566163@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-06-19 23:37:17 +00:00
}
void __init irq_domain_debugfs_init(struct dentry *root)
{
struct irq_domain *d;
domain_dir = debugfs_create_dir("domains", root);
debugfs_create_file("default", 0444, domain_dir, NULL,
&irq_domain_debug_fops);
genirq/debugfs: Add proper debugfs interface Debugging (hierarchical) interupt domains is tedious as there is no information about the hierarchy and no information about states of interrupts in the various domain levels. Add a debugfs directory 'irq' and subdirectories 'domains' and 'irqs'. The domains directory contains the domain files. The content is information about the domain. If the domain is part of a hierarchy then the parent domains are printed as well. # ls /sys/kernel/debug/irq/domains/ default INTEL-IR-2 INTEL-IR-MSI-2 IO-APIC-IR-2 PCI-MSI DMAR-MSI INTEL-IR-3 INTEL-IR-MSI-3 IO-APIC-IR-3 unknown-1 INTEL-IR-0 INTEL-IR-MSI-0 IO-APIC-IR-0 IO-APIC-IR-4 VECTOR INTEL-IR-1 INTEL-IR-MSI-1 IO-APIC-IR-1 PCI-HT # cat /sys/kernel/debug/irq/domains/VECTOR name: VECTOR size: 0 mapped: 216 flags: 0x00000041 # cat /sys/kernel/debug/irq/domains/IO-APIC-IR-0 name: IO-APIC-IR-0 size: 24 mapped: 19 flags: 0x00000041 parent: INTEL-IR-3 name: INTEL-IR-3 size: 65536 mapped: 167 flags: 0x00000041 parent: VECTOR name: VECTOR size: 0 mapped: 216 flags: 0x00000041 Unfortunately there is no per cpu information about the VECTOR domain (yet). The irqs directory contains detailed information about mapped interrupts. # cat /sys/kernel/debug/irq/irqs/3 handler: handle_edge_irq status: 0x00004000 istate: 0x00000000 ddepth: 1 wdepth: 0 dstate: 0x01018000 IRQD_IRQ_DISABLED IRQD_SINGLE_TARGET IRQD_MOVE_PCNTXT node: 0 affinity: 0-143 effectiv: 0 pending: domain: IO-APIC-IR-0 hwirq: 0x3 chip: IR-IO-APIC flags: 0x10 IRQCHIP_SKIP_SET_WAKE parent: domain: INTEL-IR-3 hwirq: 0x20000 chip: INTEL-IR flags: 0x0 parent: domain: VECTOR hwirq: 0x3 chip: APIC flags: 0x0 This was developed to simplify the debugging of the managed affinity changes. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20170619235444.537566163@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-06-19 23:37:17 +00:00
mutex_lock(&irq_domain_mutex);
list_for_each_entry(d, &irq_domain_list, link)
debugfs_add_domain_dir(d);
mutex_unlock(&irq_domain_mutex);
}
#endif