linux/net/rxrpc/ar-key.c

1248 lines
29 KiB
C
Raw Normal View History

/* RxRPC key management
*
* Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
* RxRPC keys should have a description of describing their purpose:
* "afs@CAMBRIDGE.REDHAT.COM>
*/
#include <linux/module.h>
#include <linux/net.h>
#include <linux/skbuff.h>
#include <linux/key-type.h>
#include <linux/crypto.h>
#include <linux/ctype.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
#include <net/sock.h>
#include <net/af_rxrpc.h>
#include <keys/rxrpc-type.h>
#include <keys/user-type.h>
#include "ar-internal.h"
static int rxrpc_vet_description_s(const char *);
static int rxrpc_preparse(struct key_preparsed_payload *);
static int rxrpc_preparse_s(struct key_preparsed_payload *);
static void rxrpc_free_preparse(struct key_preparsed_payload *);
static void rxrpc_free_preparse_s(struct key_preparsed_payload *);
static void rxrpc_destroy(struct key *);
static void rxrpc_destroy_s(struct key *);
static void rxrpc_describe(const struct key *, struct seq_file *);
static long rxrpc_read(const struct key *, char __user *, size_t);
/*
* rxrpc defined keys take an arbitrary string as the description and an
* arbitrary blob of data as the payload
*/
struct key_type key_type_rxrpc = {
.name = "rxrpc",
.preparse = rxrpc_preparse,
.free_preparse = rxrpc_free_preparse,
.instantiate = generic_key_instantiate,
.destroy = rxrpc_destroy,
.describe = rxrpc_describe,
.read = rxrpc_read,
};
EXPORT_SYMBOL(key_type_rxrpc);
/*
* rxrpc server defined keys take "<serviceId>:<securityIndex>" as the
* description and an 8-byte decryption key as the payload
*/
struct key_type key_type_rxrpc_s = {
.name = "rxrpc_s",
.vet_description = rxrpc_vet_description_s,
.preparse = rxrpc_preparse_s,
.free_preparse = rxrpc_free_preparse_s,
.instantiate = generic_key_instantiate,
.destroy = rxrpc_destroy_s,
.describe = rxrpc_describe,
};
/*
* Vet the description for an RxRPC server key
*/
static int rxrpc_vet_description_s(const char *desc)
{
unsigned long num;
char *p;
num = simple_strtoul(desc, &p, 10);
if (*p != ':' || num > 65535)
return -EINVAL;
num = simple_strtoul(p + 1, &p, 10);
if (*p || num < 1 || num > 255)
return -EINVAL;
return 0;
}
/*
* parse an RxKAD type XDR format token
* - the caller guarantees we have at least 4 words
*/
static int rxrpc_preparse_xdr_rxkad(struct key_preparsed_payload *prep,
size_t datalen,
const __be32 *xdr, unsigned int toklen)
{
struct rxrpc_key_token *token, **pptoken;
size_t plen;
u32 tktlen;
_enter(",{%x,%x,%x,%x},%u",
ntohl(xdr[0]), ntohl(xdr[1]), ntohl(xdr[2]), ntohl(xdr[3]),
toklen);
if (toklen <= 8 * 4)
return -EKEYREJECTED;
tktlen = ntohl(xdr[7]);
_debug("tktlen: %x", tktlen);
if (tktlen > AFSTOKEN_RK_TIX_MAX)
return -EKEYREJECTED;
if (toklen < 8 * 4 + tktlen)
return -EKEYREJECTED;
plen = sizeof(*token) + sizeof(*token->kad) + tktlen;
prep->quotalen = datalen + plen;
plen -= sizeof(*token);
token = kzalloc(sizeof(*token), GFP_KERNEL);
if (!token)
return -ENOMEM;
token->kad = kzalloc(plen, GFP_KERNEL);
if (!token->kad) {
kfree(token);
return -ENOMEM;
}
token->security_index = RXRPC_SECURITY_RXKAD;
token->kad->ticket_len = tktlen;
token->kad->vice_id = ntohl(xdr[0]);
token->kad->kvno = ntohl(xdr[1]);
token->kad->start = ntohl(xdr[4]);
token->kad->expiry = ntohl(xdr[5]);
token->kad->primary_flag = ntohl(xdr[6]);
memcpy(&token->kad->session_key, &xdr[2], 8);
memcpy(&token->kad->ticket, &xdr[8], tktlen);
_debug("SCIX: %u", token->security_index);
_debug("TLEN: %u", token->kad->ticket_len);
_debug("EXPY: %x", token->kad->expiry);
_debug("KVNO: %u", token->kad->kvno);
_debug("PRIM: %u", token->kad->primary_flag);
_debug("SKEY: %02x%02x%02x%02x%02x%02x%02x%02x",
token->kad->session_key[0], token->kad->session_key[1],
token->kad->session_key[2], token->kad->session_key[3],
token->kad->session_key[4], token->kad->session_key[5],
token->kad->session_key[6], token->kad->session_key[7]);
if (token->kad->ticket_len >= 8)
_debug("TCKT: %02x%02x%02x%02x%02x%02x%02x%02x",
token->kad->ticket[0], token->kad->ticket[1],
token->kad->ticket[2], token->kad->ticket[3],
token->kad->ticket[4], token->kad->ticket[5],
token->kad->ticket[6], token->kad->ticket[7]);
/* count the number of tokens attached */
prep->type_data[0] = (void *)((unsigned long)prep->type_data[0] + 1);
/* attach the data */
for (pptoken = (struct rxrpc_key_token **)&prep->payload[0];
*pptoken;
pptoken = &(*pptoken)->next)
continue;
*pptoken = token;
if (token->kad->expiry < prep->expiry)
prep->expiry = token->kad->expiry;
_leave(" = 0");
return 0;
}
static void rxrpc_free_krb5_principal(struct krb5_principal *princ)
{
int loop;
if (princ->name_parts) {
for (loop = princ->n_name_parts - 1; loop >= 0; loop--)
kfree(princ->name_parts[loop]);
kfree(princ->name_parts);
}
kfree(princ->realm);
}
static void rxrpc_free_krb5_tagged(struct krb5_tagged_data *td)
{
kfree(td->data);
}
/*
* free up an RxK5 token
*/
static void rxrpc_rxk5_free(struct rxk5_key *rxk5)
{
int loop;
rxrpc_free_krb5_principal(&rxk5->client);
rxrpc_free_krb5_principal(&rxk5->server);
rxrpc_free_krb5_tagged(&rxk5->session);
if (rxk5->addresses) {
for (loop = rxk5->n_addresses - 1; loop >= 0; loop--)
rxrpc_free_krb5_tagged(&rxk5->addresses[loop]);
kfree(rxk5->addresses);
}
if (rxk5->authdata) {
for (loop = rxk5->n_authdata - 1; loop >= 0; loop--)
rxrpc_free_krb5_tagged(&rxk5->authdata[loop]);
kfree(rxk5->authdata);
}
kfree(rxk5->ticket);
kfree(rxk5->ticket2);
kfree(rxk5);
}
/*
* extract a krb5 principal
*/
static int rxrpc_krb5_decode_principal(struct krb5_principal *princ,
const __be32 **_xdr,
unsigned int *_toklen)
{
const __be32 *xdr = *_xdr;
unsigned int toklen = *_toklen, n_parts, loop, tmp;
/* there must be at least one name, and at least #names+1 length
* words */
if (toklen <= 12)
return -EINVAL;
_enter(",{%x,%x,%x},%u",
ntohl(xdr[0]), ntohl(xdr[1]), ntohl(xdr[2]), toklen);
n_parts = ntohl(*xdr++);
toklen -= 4;
if (n_parts <= 0 || n_parts > AFSTOKEN_K5_COMPONENTS_MAX)
return -EINVAL;
princ->n_name_parts = n_parts;
if (toklen <= (n_parts + 1) * 4)
return -EINVAL;
princ->name_parts = kcalloc(n_parts, sizeof(char *), GFP_KERNEL);
if (!princ->name_parts)
return -ENOMEM;
for (loop = 0; loop < n_parts; loop++) {
if (toklen < 4)
return -EINVAL;
tmp = ntohl(*xdr++);
toklen -= 4;
if (tmp <= 0 || tmp > AFSTOKEN_STRING_MAX)
return -EINVAL;
if (tmp > toklen)
return -EINVAL;
princ->name_parts[loop] = kmalloc(tmp + 1, GFP_KERNEL);
if (!princ->name_parts[loop])
return -ENOMEM;
memcpy(princ->name_parts[loop], xdr, tmp);
princ->name_parts[loop][tmp] = 0;
tmp = (tmp + 3) & ~3;
toklen -= tmp;
xdr += tmp >> 2;
}
if (toklen < 4)
return -EINVAL;
tmp = ntohl(*xdr++);
toklen -= 4;
if (tmp <= 0 || tmp > AFSTOKEN_K5_REALM_MAX)
return -EINVAL;
if (tmp > toklen)
return -EINVAL;
princ->realm = kmalloc(tmp + 1, GFP_KERNEL);
if (!princ->realm)
return -ENOMEM;
memcpy(princ->realm, xdr, tmp);
princ->realm[tmp] = 0;
tmp = (tmp + 3) & ~3;
toklen -= tmp;
xdr += tmp >> 2;
_debug("%s/...@%s", princ->name_parts[0], princ->realm);
*_xdr = xdr;
*_toklen = toklen;
_leave(" = 0 [toklen=%u]", toklen);
return 0;
}
/*
* extract a piece of krb5 tagged data
*/
static int rxrpc_krb5_decode_tagged_data(struct krb5_tagged_data *td,
size_t max_data_size,
const __be32 **_xdr,
unsigned int *_toklen)
{
const __be32 *xdr = *_xdr;
unsigned int toklen = *_toklen, len;
/* there must be at least one tag and one length word */
if (toklen <= 8)
return -EINVAL;
_enter(",%zu,{%x,%x},%u",
max_data_size, ntohl(xdr[0]), ntohl(xdr[1]), toklen);
td->tag = ntohl(*xdr++);
len = ntohl(*xdr++);
toklen -= 8;
if (len > max_data_size)
return -EINVAL;
td->data_len = len;
if (len > 0) {
td->data = kmemdup(xdr, len, GFP_KERNEL);
if (!td->data)
return -ENOMEM;
len = (len + 3) & ~3;
toklen -= len;
xdr += len >> 2;
}
_debug("tag %x len %x", td->tag, td->data_len);
*_xdr = xdr;
*_toklen = toklen;
_leave(" = 0 [toklen=%u]", toklen);
return 0;
}
/*
* extract an array of tagged data
*/
static int rxrpc_krb5_decode_tagged_array(struct krb5_tagged_data **_td,
u8 *_n_elem,
u8 max_n_elem,
size_t max_elem_size,
const __be32 **_xdr,
unsigned int *_toklen)
{
struct krb5_tagged_data *td;
const __be32 *xdr = *_xdr;
unsigned int toklen = *_toklen, n_elem, loop;
int ret;
/* there must be at least one count */
if (toklen < 4)
return -EINVAL;
_enter(",,%u,%zu,{%x},%u",
max_n_elem, max_elem_size, ntohl(xdr[0]), toklen);
n_elem = ntohl(*xdr++);
toklen -= 4;
if (n_elem > max_n_elem)
return -EINVAL;
*_n_elem = n_elem;
if (n_elem > 0) {
if (toklen <= (n_elem + 1) * 4)
return -EINVAL;
_debug("n_elem %d", n_elem);
td = kcalloc(n_elem, sizeof(struct krb5_tagged_data),
GFP_KERNEL);
if (!td)
return -ENOMEM;
*_td = td;
for (loop = 0; loop < n_elem; loop++) {
ret = rxrpc_krb5_decode_tagged_data(&td[loop],
max_elem_size,
&xdr, &toklen);
if (ret < 0)
return ret;
}
}
*_xdr = xdr;
*_toklen = toklen;
_leave(" = 0 [toklen=%u]", toklen);
return 0;
}
/*
* extract a krb5 ticket
*/
static int rxrpc_krb5_decode_ticket(u8 **_ticket, u16 *_tktlen,
const __be32 **_xdr, unsigned int *_toklen)
{
const __be32 *xdr = *_xdr;
unsigned int toklen = *_toklen, len;
/* there must be at least one length word */
if (toklen <= 4)
return -EINVAL;
_enter(",{%x},%u", ntohl(xdr[0]), toklen);
len = ntohl(*xdr++);
toklen -= 4;
if (len > AFSTOKEN_K5_TIX_MAX)
return -EINVAL;
*_tktlen = len;
_debug("ticket len %u", len);
if (len > 0) {
*_ticket = kmemdup(xdr, len, GFP_KERNEL);
if (!*_ticket)
return -ENOMEM;
len = (len + 3) & ~3;
toklen -= len;
xdr += len >> 2;
}
*_xdr = xdr;
*_toklen = toklen;
_leave(" = 0 [toklen=%u]", toklen);
return 0;
}
/*
* parse an RxK5 type XDR format token
* - the caller guarantees we have at least 4 words
*/
static int rxrpc_preparse_xdr_rxk5(struct key_preparsed_payload *prep,
size_t datalen,
const __be32 *xdr, unsigned int toklen)
{
struct rxrpc_key_token *token, **pptoken;
struct rxk5_key *rxk5;
const __be32 *end_xdr = xdr + (toklen >> 2);
int ret;
_enter(",{%x,%x,%x,%x},%u",
ntohl(xdr[0]), ntohl(xdr[1]), ntohl(xdr[2]), ntohl(xdr[3]),
toklen);
/* reserve some payload space for this subkey - the length of the token
* is a reasonable approximation */
prep->quotalen = datalen + toklen;
token = kzalloc(sizeof(*token), GFP_KERNEL);
if (!token)
return -ENOMEM;
rxk5 = kzalloc(sizeof(*rxk5), GFP_KERNEL);
if (!rxk5) {
kfree(token);
return -ENOMEM;
}
token->security_index = RXRPC_SECURITY_RXK5;
token->k5 = rxk5;
/* extract the principals */
ret = rxrpc_krb5_decode_principal(&rxk5->client, &xdr, &toklen);
if (ret < 0)
goto error;
ret = rxrpc_krb5_decode_principal(&rxk5->server, &xdr, &toklen);
if (ret < 0)
goto error;
/* extract the session key and the encoding type (the tag field ->
* ENCTYPE_xxx) */
ret = rxrpc_krb5_decode_tagged_data(&rxk5->session, AFSTOKEN_DATA_MAX,
&xdr, &toklen);
if (ret < 0)
goto error;
if (toklen < 4 * 8 + 2 * 4)
goto inval;
rxk5->authtime = be64_to_cpup((const __be64 *) xdr);
xdr += 2;
rxk5->starttime = be64_to_cpup((const __be64 *) xdr);
xdr += 2;
rxk5->endtime = be64_to_cpup((const __be64 *) xdr);
xdr += 2;
rxk5->renew_till = be64_to_cpup((const __be64 *) xdr);
xdr += 2;
rxk5->is_skey = ntohl(*xdr++);
rxk5->flags = ntohl(*xdr++);
toklen -= 4 * 8 + 2 * 4;
_debug("times: a=%llx s=%llx e=%llx rt=%llx",
rxk5->authtime, rxk5->starttime, rxk5->endtime,
rxk5->renew_till);
_debug("is_skey=%x flags=%x", rxk5->is_skey, rxk5->flags);
/* extract the permitted client addresses */
ret = rxrpc_krb5_decode_tagged_array(&rxk5->addresses,
&rxk5->n_addresses,
AFSTOKEN_K5_ADDRESSES_MAX,
AFSTOKEN_DATA_MAX,
&xdr, &toklen);
if (ret < 0)
goto error;
ASSERTCMP((end_xdr - xdr) << 2, ==, toklen);
/* extract the tickets */
ret = rxrpc_krb5_decode_ticket(&rxk5->ticket, &rxk5->ticket_len,
&xdr, &toklen);
if (ret < 0)
goto error;
ret = rxrpc_krb5_decode_ticket(&rxk5->ticket2, &rxk5->ticket2_len,
&xdr, &toklen);
if (ret < 0)
goto error;
ASSERTCMP((end_xdr - xdr) << 2, ==, toklen);
/* extract the typed auth data */
ret = rxrpc_krb5_decode_tagged_array(&rxk5->authdata,
&rxk5->n_authdata,
AFSTOKEN_K5_AUTHDATA_MAX,
AFSTOKEN_BDATALN_MAX,
&xdr, &toklen);
if (ret < 0)
goto error;
ASSERTCMP((end_xdr - xdr) << 2, ==, toklen);
if (toklen != 0)
goto inval;
/* attach the payload */
for (pptoken = (struct rxrpc_key_token **)&prep->payload[0];
*pptoken;
pptoken = &(*pptoken)->next)
continue;
*pptoken = token;
if (token->kad->expiry < prep->expiry)
prep->expiry = token->kad->expiry;
_leave(" = 0");
return 0;
inval:
ret = -EINVAL;
error:
rxrpc_rxk5_free(rxk5);
kfree(token);
_leave(" = %d", ret);
return ret;
}
/*
* attempt to parse the data as the XDR format
* - the caller guarantees we have more than 7 words
*/
static int rxrpc_preparse_xdr(struct key_preparsed_payload *prep)
{
const __be32 *xdr = prep->data, *token;
const char *cp;
unsigned int len, tmp, loop, ntoken, toklen, sec_ix;
size_t datalen = prep->datalen;
int ret;
_enter(",{%x,%x,%x,%x},%zu",
ntohl(xdr[0]), ntohl(xdr[1]), ntohl(xdr[2]), ntohl(xdr[3]),
prep->datalen);
if (datalen > AFSTOKEN_LENGTH_MAX)
goto not_xdr;
/* XDR is an array of __be32's */
if (datalen & 3)
goto not_xdr;
/* the flags should be 0 (the setpag bit must be handled by
* userspace) */
if (ntohl(*xdr++) != 0)
goto not_xdr;
datalen -= 4;
/* check the cell name */
len = ntohl(*xdr++);
if (len < 1 || len > AFSTOKEN_CELL_MAX)
goto not_xdr;
datalen -= 4;
tmp = (len + 3) & ~3;
if (tmp > datalen)
goto not_xdr;
cp = (const char *) xdr;
for (loop = 0; loop < len; loop++)
if (!isprint(cp[loop]))
goto not_xdr;
if (len < tmp)
for (; loop < tmp; loop++)
if (cp[loop])
goto not_xdr;
_debug("cellname: [%u/%u] '%*.*s'",
len, tmp, len, len, (const char *) xdr);
datalen -= tmp;
xdr += tmp >> 2;
/* get the token count */
if (datalen < 12)
goto not_xdr;
ntoken = ntohl(*xdr++);
datalen -= 4;
_debug("ntoken: %x", ntoken);
if (ntoken < 1 || ntoken > AFSTOKEN_MAX)
goto not_xdr;
/* check each token wrapper */
token = xdr;
loop = ntoken;
do {
if (datalen < 8)
goto not_xdr;
toklen = ntohl(*xdr++);
sec_ix = ntohl(*xdr);
datalen -= 4;
_debug("token: [%x/%zx] %x", toklen, datalen, sec_ix);
if (toklen < 20 || toklen > datalen)
goto not_xdr;
datalen -= (toklen + 3) & ~3;
xdr += (toklen + 3) >> 2;
} while (--loop > 0);
_debug("remainder: %zu", datalen);
if (datalen != 0)
goto not_xdr;
/* okay: we're going to assume it's valid XDR format
* - we ignore the cellname, relying on the key to be correctly named
*/
do {
xdr = token;
toklen = ntohl(*xdr++);
token = xdr + ((toklen + 3) >> 2);
sec_ix = ntohl(*xdr++);
toklen -= 4;
_debug("TOKEN type=%u [%p-%p]", sec_ix, xdr, token);
switch (sec_ix) {
case RXRPC_SECURITY_RXKAD:
ret = rxrpc_preparse_xdr_rxkad(prep, datalen, xdr, toklen);
if (ret != 0)
goto error;
break;
case RXRPC_SECURITY_RXK5:
ret = rxrpc_preparse_xdr_rxk5(prep, datalen, xdr, toklen);
if (ret != 0)
goto error;
break;
default:
ret = -EPROTONOSUPPORT;
goto error;
}
} while (--ntoken > 0);
_leave(" = 0");
return 0;
not_xdr:
_leave(" = -EPROTO");
return -EPROTO;
error:
_leave(" = %d", ret);
return ret;
}
/*
* Preparse an rxrpc defined key.
*
* Data should be of the form:
* OFFSET LEN CONTENT
* 0 4 key interface version number
* 4 2 security index (type)
* 6 2 ticket length
* 8 4 key expiry time (time_t)
* 12 4 kvno
* 16 8 session key
* 24 [len] ticket
*
* if no data is provided, then a no-security key is made
*/
static int rxrpc_preparse(struct key_preparsed_payload *prep)
{
const struct rxrpc_key_data_v1 *v1;
struct rxrpc_key_token *token, **pp;
size_t plen;
u32 kver;
int ret;
_enter("%zu", prep->datalen);
/* handle a no-security key */
KEYS: Add payload preparsing opportunity prior to key instantiate or update Give the key type the opportunity to preparse the payload prior to the instantiation and update routines being called. This is done with the provision of two new key type operations: int (*preparse)(struct key_preparsed_payload *prep); void (*free_preparse)(struct key_preparsed_payload *prep); If the first operation is present, then it is called before key creation (in the add/update case) or before the key semaphore is taken (in the update and instantiate cases). The second operation is called to clean up if the first was called. preparse() is given the opportunity to fill in the following structure: struct key_preparsed_payload { char *description; void *type_data[2]; void *payload; const void *data; size_t datalen; size_t quotalen; }; Before the preparser is called, the first three fields will have been cleared, the payload pointer and size will be stored in data and datalen and the default quota size from the key_type struct will be stored into quotalen. The preparser may parse the payload in any way it likes and may store data in the type_data[] and payload fields for use by the instantiate() and update() ops. The preparser may also propose a description for the key by attaching it as a string to the description field. This can be used by passing a NULL or "" description to the add_key() system call or the key_create_or_update() function. This cannot work with request_key() as that required the description to tell the upcall about the key to be created. This, for example permits keys that store PGP public keys to generate their own name from the user ID and public key fingerprint in the key. The instantiate() and update() operations are then modified to look like this: int (*instantiate)(struct key *key, struct key_preparsed_payload *prep); int (*update)(struct key *key, struct key_preparsed_payload *prep); and the new payload data is passed in *prep, whether or not it was preparsed. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-13 12:06:29 +00:00
if (!prep->data && prep->datalen == 0)
return 0;
/* determine if the XDR payload format is being used */
KEYS: Add payload preparsing opportunity prior to key instantiate or update Give the key type the opportunity to preparse the payload prior to the instantiation and update routines being called. This is done with the provision of two new key type operations: int (*preparse)(struct key_preparsed_payload *prep); void (*free_preparse)(struct key_preparsed_payload *prep); If the first operation is present, then it is called before key creation (in the add/update case) or before the key semaphore is taken (in the update and instantiate cases). The second operation is called to clean up if the first was called. preparse() is given the opportunity to fill in the following structure: struct key_preparsed_payload { char *description; void *type_data[2]; void *payload; const void *data; size_t datalen; size_t quotalen; }; Before the preparser is called, the first three fields will have been cleared, the payload pointer and size will be stored in data and datalen and the default quota size from the key_type struct will be stored into quotalen. The preparser may parse the payload in any way it likes and may store data in the type_data[] and payload fields for use by the instantiate() and update() ops. The preparser may also propose a description for the key by attaching it as a string to the description field. This can be used by passing a NULL or "" description to the add_key() system call or the key_create_or_update() function. This cannot work with request_key() as that required the description to tell the upcall about the key to be created. This, for example permits keys that store PGP public keys to generate their own name from the user ID and public key fingerprint in the key. The instantiate() and update() operations are then modified to look like this: int (*instantiate)(struct key *key, struct key_preparsed_payload *prep); int (*update)(struct key *key, struct key_preparsed_payload *prep); and the new payload data is passed in *prep, whether or not it was preparsed. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-13 12:06:29 +00:00
if (prep->datalen > 7 * 4) {
ret = rxrpc_preparse_xdr(prep);
if (ret != -EPROTO)
return ret;
}
/* get the key interface version number */
ret = -EINVAL;
KEYS: Add payload preparsing opportunity prior to key instantiate or update Give the key type the opportunity to preparse the payload prior to the instantiation and update routines being called. This is done with the provision of two new key type operations: int (*preparse)(struct key_preparsed_payload *prep); void (*free_preparse)(struct key_preparsed_payload *prep); If the first operation is present, then it is called before key creation (in the add/update case) or before the key semaphore is taken (in the update and instantiate cases). The second operation is called to clean up if the first was called. preparse() is given the opportunity to fill in the following structure: struct key_preparsed_payload { char *description; void *type_data[2]; void *payload; const void *data; size_t datalen; size_t quotalen; }; Before the preparser is called, the first three fields will have been cleared, the payload pointer and size will be stored in data and datalen and the default quota size from the key_type struct will be stored into quotalen. The preparser may parse the payload in any way it likes and may store data in the type_data[] and payload fields for use by the instantiate() and update() ops. The preparser may also propose a description for the key by attaching it as a string to the description field. This can be used by passing a NULL or "" description to the add_key() system call or the key_create_or_update() function. This cannot work with request_key() as that required the description to tell the upcall about the key to be created. This, for example permits keys that store PGP public keys to generate their own name from the user ID and public key fingerprint in the key. The instantiate() and update() operations are then modified to look like this: int (*instantiate)(struct key *key, struct key_preparsed_payload *prep); int (*update)(struct key *key, struct key_preparsed_payload *prep); and the new payload data is passed in *prep, whether or not it was preparsed. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-13 12:06:29 +00:00
if (prep->datalen <= 4 || !prep->data)
goto error;
KEYS: Add payload preparsing opportunity prior to key instantiate or update Give the key type the opportunity to preparse the payload prior to the instantiation and update routines being called. This is done with the provision of two new key type operations: int (*preparse)(struct key_preparsed_payload *prep); void (*free_preparse)(struct key_preparsed_payload *prep); If the first operation is present, then it is called before key creation (in the add/update case) or before the key semaphore is taken (in the update and instantiate cases). The second operation is called to clean up if the first was called. preparse() is given the opportunity to fill in the following structure: struct key_preparsed_payload { char *description; void *type_data[2]; void *payload; const void *data; size_t datalen; size_t quotalen; }; Before the preparser is called, the first three fields will have been cleared, the payload pointer and size will be stored in data and datalen and the default quota size from the key_type struct will be stored into quotalen. The preparser may parse the payload in any way it likes and may store data in the type_data[] and payload fields for use by the instantiate() and update() ops. The preparser may also propose a description for the key by attaching it as a string to the description field. This can be used by passing a NULL or "" description to the add_key() system call or the key_create_or_update() function. This cannot work with request_key() as that required the description to tell the upcall about the key to be created. This, for example permits keys that store PGP public keys to generate their own name from the user ID and public key fingerprint in the key. The instantiate() and update() operations are then modified to look like this: int (*instantiate)(struct key *key, struct key_preparsed_payload *prep); int (*update)(struct key *key, struct key_preparsed_payload *prep); and the new payload data is passed in *prep, whether or not it was preparsed. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-13 12:06:29 +00:00
memcpy(&kver, prep->data, sizeof(kver));
prep->data += sizeof(kver);
prep->datalen -= sizeof(kver);
_debug("KEY I/F VERSION: %u", kver);
ret = -EKEYREJECTED;
if (kver != 1)
goto error;
/* deal with a version 1 key */
ret = -EINVAL;
KEYS: Add payload preparsing opportunity prior to key instantiate or update Give the key type the opportunity to preparse the payload prior to the instantiation and update routines being called. This is done with the provision of two new key type operations: int (*preparse)(struct key_preparsed_payload *prep); void (*free_preparse)(struct key_preparsed_payload *prep); If the first operation is present, then it is called before key creation (in the add/update case) or before the key semaphore is taken (in the update and instantiate cases). The second operation is called to clean up if the first was called. preparse() is given the opportunity to fill in the following structure: struct key_preparsed_payload { char *description; void *type_data[2]; void *payload; const void *data; size_t datalen; size_t quotalen; }; Before the preparser is called, the first three fields will have been cleared, the payload pointer and size will be stored in data and datalen and the default quota size from the key_type struct will be stored into quotalen. The preparser may parse the payload in any way it likes and may store data in the type_data[] and payload fields for use by the instantiate() and update() ops. The preparser may also propose a description for the key by attaching it as a string to the description field. This can be used by passing a NULL or "" description to the add_key() system call or the key_create_or_update() function. This cannot work with request_key() as that required the description to tell the upcall about the key to be created. This, for example permits keys that store PGP public keys to generate their own name from the user ID and public key fingerprint in the key. The instantiate() and update() operations are then modified to look like this: int (*instantiate)(struct key *key, struct key_preparsed_payload *prep); int (*update)(struct key *key, struct key_preparsed_payload *prep); and the new payload data is passed in *prep, whether or not it was preparsed. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-13 12:06:29 +00:00
if (prep->datalen < sizeof(*v1))
goto error;
KEYS: Add payload preparsing opportunity prior to key instantiate or update Give the key type the opportunity to preparse the payload prior to the instantiation and update routines being called. This is done with the provision of two new key type operations: int (*preparse)(struct key_preparsed_payload *prep); void (*free_preparse)(struct key_preparsed_payload *prep); If the first operation is present, then it is called before key creation (in the add/update case) or before the key semaphore is taken (in the update and instantiate cases). The second operation is called to clean up if the first was called. preparse() is given the opportunity to fill in the following structure: struct key_preparsed_payload { char *description; void *type_data[2]; void *payload; const void *data; size_t datalen; size_t quotalen; }; Before the preparser is called, the first three fields will have been cleared, the payload pointer and size will be stored in data and datalen and the default quota size from the key_type struct will be stored into quotalen. The preparser may parse the payload in any way it likes and may store data in the type_data[] and payload fields for use by the instantiate() and update() ops. The preparser may also propose a description for the key by attaching it as a string to the description field. This can be used by passing a NULL or "" description to the add_key() system call or the key_create_or_update() function. This cannot work with request_key() as that required the description to tell the upcall about the key to be created. This, for example permits keys that store PGP public keys to generate their own name from the user ID and public key fingerprint in the key. The instantiate() and update() operations are then modified to look like this: int (*instantiate)(struct key *key, struct key_preparsed_payload *prep); int (*update)(struct key *key, struct key_preparsed_payload *prep); and the new payload data is passed in *prep, whether or not it was preparsed. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-13 12:06:29 +00:00
v1 = prep->data;
if (prep->datalen != sizeof(*v1) + v1->ticket_length)
goto error;
_debug("SCIX: %u", v1->security_index);
_debug("TLEN: %u", v1->ticket_length);
_debug("EXPY: %x", v1->expiry);
_debug("KVNO: %u", v1->kvno);
_debug("SKEY: %02x%02x%02x%02x%02x%02x%02x%02x",
v1->session_key[0], v1->session_key[1],
v1->session_key[2], v1->session_key[3],
v1->session_key[4], v1->session_key[5],
v1->session_key[6], v1->session_key[7]);
if (v1->ticket_length >= 8)
_debug("TCKT: %02x%02x%02x%02x%02x%02x%02x%02x",
v1->ticket[0], v1->ticket[1],
v1->ticket[2], v1->ticket[3],
v1->ticket[4], v1->ticket[5],
v1->ticket[6], v1->ticket[7]);
ret = -EPROTONOSUPPORT;
if (v1->security_index != RXRPC_SECURITY_RXKAD)
goto error;
plen = sizeof(*token->kad) + v1->ticket_length;
prep->quotalen = plen + sizeof(*token);
ret = -ENOMEM;
token = kzalloc(sizeof(*token), GFP_KERNEL);
if (!token)
goto error;
token->kad = kzalloc(plen, GFP_KERNEL);
if (!token->kad)
goto error_free;
token->security_index = RXRPC_SECURITY_RXKAD;
token->kad->ticket_len = v1->ticket_length;
token->kad->expiry = v1->expiry;
token->kad->kvno = v1->kvno;
memcpy(&token->kad->session_key, &v1->session_key, 8);
memcpy(&token->kad->ticket, v1->ticket, v1->ticket_length);
/* count the number of tokens attached */
prep->type_data[0] = (void *)((unsigned long)prep->type_data[0] + 1);
/* attach the data */
pp = (struct rxrpc_key_token **)&prep->payload[0];
while (*pp)
pp = &(*pp)->next;
*pp = token;
if (token->kad->expiry < prep->expiry)
prep->expiry = token->kad->expiry;
token = NULL;
ret = 0;
error_free:
kfree(token);
error:
return ret;
}
/*
* Free token list.
*/
static void rxrpc_free_token_list(struct rxrpc_key_token *token)
{
struct rxrpc_key_token *next;
for (; token; token = next) {
next = token->next;
switch (token->security_index) {
case RXRPC_SECURITY_RXKAD:
kfree(token->kad);
break;
case RXRPC_SECURITY_RXK5:
if (token->k5)
rxrpc_rxk5_free(token->k5);
break;
default:
printk(KERN_ERR "Unknown token type %x on rxrpc key\n",
token->security_index);
BUG();
}
kfree(token);
}
}
/*
* Clean up preparse data.
*/
static void rxrpc_free_preparse(struct key_preparsed_payload *prep)
{
rxrpc_free_token_list(prep->payload[0]);
}
/*
* Preparse a server secret key.
*
* The data should be the 8-byte secret key.
*/
static int rxrpc_preparse_s(struct key_preparsed_payload *prep)
{
struct crypto_blkcipher *ci;
_enter("%zu", prep->datalen);
KEYS: Add payload preparsing opportunity prior to key instantiate or update Give the key type the opportunity to preparse the payload prior to the instantiation and update routines being called. This is done with the provision of two new key type operations: int (*preparse)(struct key_preparsed_payload *prep); void (*free_preparse)(struct key_preparsed_payload *prep); If the first operation is present, then it is called before key creation (in the add/update case) or before the key semaphore is taken (in the update and instantiate cases). The second operation is called to clean up if the first was called. preparse() is given the opportunity to fill in the following structure: struct key_preparsed_payload { char *description; void *type_data[2]; void *payload; const void *data; size_t datalen; size_t quotalen; }; Before the preparser is called, the first three fields will have been cleared, the payload pointer and size will be stored in data and datalen and the default quota size from the key_type struct will be stored into quotalen. The preparser may parse the payload in any way it likes and may store data in the type_data[] and payload fields for use by the instantiate() and update() ops. The preparser may also propose a description for the key by attaching it as a string to the description field. This can be used by passing a NULL or "" description to the add_key() system call or the key_create_or_update() function. This cannot work with request_key() as that required the description to tell the upcall about the key to be created. This, for example permits keys that store PGP public keys to generate their own name from the user ID and public key fingerprint in the key. The instantiate() and update() operations are then modified to look like this: int (*instantiate)(struct key *key, struct key_preparsed_payload *prep); int (*update)(struct key *key, struct key_preparsed_payload *prep); and the new payload data is passed in *prep, whether or not it was preparsed. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-13 12:06:29 +00:00
if (prep->datalen != 8)
return -EINVAL;
memcpy(&prep->type_data, prep->data, 8);
ci = crypto_alloc_blkcipher("pcbc(des)", 0, CRYPTO_ALG_ASYNC);
if (IS_ERR(ci)) {
_leave(" = %ld", PTR_ERR(ci));
return PTR_ERR(ci);
}
KEYS: Add payload preparsing opportunity prior to key instantiate or update Give the key type the opportunity to preparse the payload prior to the instantiation and update routines being called. This is done with the provision of two new key type operations: int (*preparse)(struct key_preparsed_payload *prep); void (*free_preparse)(struct key_preparsed_payload *prep); If the first operation is present, then it is called before key creation (in the add/update case) or before the key semaphore is taken (in the update and instantiate cases). The second operation is called to clean up if the first was called. preparse() is given the opportunity to fill in the following structure: struct key_preparsed_payload { char *description; void *type_data[2]; void *payload; const void *data; size_t datalen; size_t quotalen; }; Before the preparser is called, the first three fields will have been cleared, the payload pointer and size will be stored in data and datalen and the default quota size from the key_type struct will be stored into quotalen. The preparser may parse the payload in any way it likes and may store data in the type_data[] and payload fields for use by the instantiate() and update() ops. The preparser may also propose a description for the key by attaching it as a string to the description field. This can be used by passing a NULL or "" description to the add_key() system call or the key_create_or_update() function. This cannot work with request_key() as that required the description to tell the upcall about the key to be created. This, for example permits keys that store PGP public keys to generate their own name from the user ID and public key fingerprint in the key. The instantiate() and update() operations are then modified to look like this: int (*instantiate)(struct key *key, struct key_preparsed_payload *prep); int (*update)(struct key *key, struct key_preparsed_payload *prep); and the new payload data is passed in *prep, whether or not it was preparsed. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-13 12:06:29 +00:00
if (crypto_blkcipher_setkey(ci, prep->data, 8) < 0)
BUG();
prep->payload[0] = ci;
_leave(" = 0");
return 0;
}
/*
* Clean up preparse data.
*/
static void rxrpc_free_preparse_s(struct key_preparsed_payload *prep)
{
if (prep->payload[0])
crypto_free_blkcipher(prep->payload[0]);
}
/*
* dispose of the data dangling from the corpse of a rxrpc key
*/
static void rxrpc_destroy(struct key *key)
{
rxrpc_free_token_list(key->payload.data);
}
/*
* dispose of the data dangling from the corpse of a rxrpc key
*/
static void rxrpc_destroy_s(struct key *key)
{
if (key->payload.data) {
crypto_free_blkcipher(key->payload.data);
key->payload.data = NULL;
}
}
/*
* describe the rxrpc key
*/
static void rxrpc_describe(const struct key *key, struct seq_file *m)
{
seq_puts(m, key->description);
}
/*
* grab the security key for a socket
*/
int rxrpc_request_key(struct rxrpc_sock *rx, char __user *optval, int optlen)
{
struct key *key;
char *description;
_enter("");
if (optlen <= 0 || optlen > PAGE_SIZE - 1)
return -EINVAL;
description = kmalloc(optlen + 1, GFP_KERNEL);
if (!description)
return -ENOMEM;
if (copy_from_user(description, optval, optlen)) {
kfree(description);
return -EFAULT;
}
description[optlen] = 0;
key = request_key(&key_type_rxrpc, description, NULL);
if (IS_ERR(key)) {
kfree(description);
_leave(" = %ld", PTR_ERR(key));
return PTR_ERR(key);
}
rx->key = key;
kfree(description);
_leave(" = 0 [key %x]", key->serial);
return 0;
}
/*
* grab the security keyring for a server socket
*/
int rxrpc_server_keyring(struct rxrpc_sock *rx, char __user *optval,
int optlen)
{
struct key *key;
char *description;
_enter("");
if (optlen <= 0 || optlen > PAGE_SIZE - 1)
return -EINVAL;
description = kmalloc(optlen + 1, GFP_KERNEL);
if (!description)
return -ENOMEM;
if (copy_from_user(description, optval, optlen)) {
kfree(description);
return -EFAULT;
}
description[optlen] = 0;
key = request_key(&key_type_keyring, description, NULL);
if (IS_ERR(key)) {
kfree(description);
_leave(" = %ld", PTR_ERR(key));
return PTR_ERR(key);
}
rx->securities = key;
kfree(description);
_leave(" = 0 [key %x]", key->serial);
return 0;
}
/*
* generate a server data key
*/
int rxrpc_get_server_data_key(struct rxrpc_connection *conn,
const void *session_key,
time_t expiry,
u32 kvno)
{
CRED: Inaugurate COW credentials Inaugurate copy-on-write credentials management. This uses RCU to manage the credentials pointer in the task_struct with respect to accesses by other tasks. A process may only modify its own credentials, and so does not need locking to access or modify its own credentials. A mutex (cred_replace_mutex) is added to the task_struct to control the effect of PTRACE_ATTACHED on credential calculations, particularly with respect to execve(). With this patch, the contents of an active credentials struct may not be changed directly; rather a new set of credentials must be prepared, modified and committed using something like the following sequence of events: struct cred *new = prepare_creds(); int ret = blah(new); if (ret < 0) { abort_creds(new); return ret; } return commit_creds(new); There are some exceptions to this rule: the keyrings pointed to by the active credentials may be instantiated - keyrings violate the COW rule as managing COW keyrings is tricky, given that it is possible for a task to directly alter the keys in a keyring in use by another task. To help enforce this, various pointers to sets of credentials, such as those in the task_struct, are declared const. The purpose of this is compile-time discouragement of altering credentials through those pointers. Once a set of credentials has been made public through one of these pointers, it may not be modified, except under special circumstances: (1) Its reference count may incremented and decremented. (2) The keyrings to which it points may be modified, but not replaced. The only safe way to modify anything else is to create a replacement and commit using the functions described in Documentation/credentials.txt (which will be added by a later patch). This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). This now prepares and commits credentials in various places in the security code rather than altering the current creds directly. (2) Temporary credential overrides. do_coredump() and sys_faccessat() now prepare their own credentials and temporarily override the ones currently on the acting thread, whilst preventing interference from other threads by holding cred_replace_mutex on the thread being dumped. This will be replaced in a future patch by something that hands down the credentials directly to the functions being called, rather than altering the task's objective credentials. (3) LSM interface. A number of functions have been changed, added or removed: (*) security_capset_check(), ->capset_check() (*) security_capset_set(), ->capset_set() Removed in favour of security_capset(). (*) security_capset(), ->capset() New. This is passed a pointer to the new creds, a pointer to the old creds and the proposed capability sets. It should fill in the new creds or return an error. All pointers, barring the pointer to the new creds, are now const. (*) security_bprm_apply_creds(), ->bprm_apply_creds() Changed; now returns a value, which will cause the process to be killed if it's an error. (*) security_task_alloc(), ->task_alloc_security() Removed in favour of security_prepare_creds(). (*) security_cred_free(), ->cred_free() New. Free security data attached to cred->security. (*) security_prepare_creds(), ->cred_prepare() New. Duplicate any security data attached to cred->security. (*) security_commit_creds(), ->cred_commit() New. Apply any security effects for the upcoming installation of new security by commit_creds(). (*) security_task_post_setuid(), ->task_post_setuid() Removed in favour of security_task_fix_setuid(). (*) security_task_fix_setuid(), ->task_fix_setuid() Fix up the proposed new credentials for setuid(). This is used by cap_set_fix_setuid() to implicitly adjust capabilities in line with setuid() changes. Changes are made to the new credentials, rather than the task itself as in security_task_post_setuid(). (*) security_task_reparent_to_init(), ->task_reparent_to_init() Removed. Instead the task being reparented to init is referred directly to init's credentials. NOTE! This results in the loss of some state: SELinux's osid no longer records the sid of the thread that forked it. (*) security_key_alloc(), ->key_alloc() (*) security_key_permission(), ->key_permission() Changed. These now take cred pointers rather than task pointers to refer to the security context. (4) sys_capset(). This has been simplified and uses less locking. The LSM functions it calls have been merged. (5) reparent_to_kthreadd(). This gives the current thread the same credentials as init by simply using commit_thread() to point that way. (6) __sigqueue_alloc() and switch_uid() __sigqueue_alloc() can't stop the target task from changing its creds beneath it, so this function gets a reference to the currently applicable user_struct which it then passes into the sigqueue struct it returns if successful. switch_uid() is now called from commit_creds(), and possibly should be folded into that. commit_creds() should take care of protecting __sigqueue_alloc(). (7) [sg]et[ug]id() and co and [sg]et_current_groups. The set functions now all use prepare_creds(), commit_creds() and abort_creds() to build and check a new set of credentials before applying it. security_task_set[ug]id() is called inside the prepared section. This guarantees that nothing else will affect the creds until we've finished. The calling of set_dumpable() has been moved into commit_creds(). Much of the functionality of set_user() has been moved into commit_creds(). The get functions all simply access the data directly. (8) security_task_prctl() and cap_task_prctl(). security_task_prctl() has been modified to return -ENOSYS if it doesn't want to handle a function, or otherwise return the return value directly rather than through an argument. Additionally, cap_task_prctl() now prepares a new set of credentials, even if it doesn't end up using it. (9) Keyrings. A number of changes have been made to the keyrings code: (a) switch_uid_keyring(), copy_keys(), exit_keys() and suid_keys() have all been dropped and built in to the credentials functions directly. They may want separating out again later. (b) key_alloc() and search_process_keyrings() now take a cred pointer rather than a task pointer to specify the security context. (c) copy_creds() gives a new thread within the same thread group a new thread keyring if its parent had one, otherwise it discards the thread keyring. (d) The authorisation key now points directly to the credentials to extend the search into rather pointing to the task that carries them. (e) Installing thread, process or session keyrings causes a new set of credentials to be created, even though it's not strictly necessary for process or session keyrings (they're shared). (10) Usermode helper. The usermode helper code now carries a cred struct pointer in its subprocess_info struct instead of a new session keyring pointer. This set of credentials is derived from init_cred and installed on the new process after it has been cloned. call_usermodehelper_setup() allocates the new credentials and call_usermodehelper_freeinfo() discards them if they haven't been used. A special cred function (prepare_usermodeinfo_creds()) is provided specifically for call_usermodehelper_setup() to call. call_usermodehelper_setkeys() adjusts the credentials to sport the supplied keyring as the new session keyring. (11) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) selinux_setprocattr() no longer does its check for whether the current ptracer can access processes with the new SID inside the lock that covers getting the ptracer's SID. Whilst this lock ensures that the check is done with the ptracer pinned, the result is only valid until the lock is released, so there's no point doing it inside the lock. (12) is_single_threaded(). This function has been extracted from selinux_setprocattr() and put into a file of its own in the lib/ directory as join_session_keyring() now wants to use it too. The code in SELinux just checked to see whether a task shared mm_structs with other tasks (CLONE_VM), but that isn't good enough. We really want to know if they're part of the same thread group (CLONE_THREAD). (13) nfsd. The NFS server daemon now has to use the COW credentials to set the credentials it is going to use. It really needs to pass the credentials down to the functions it calls, but it can't do that until other patches in this series have been applied. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 23:39:23 +00:00
const struct cred *cred = current_cred();
struct key *key;
int ret;
struct {
u32 kver;
struct rxrpc_key_data_v1 v1;
} data;
_enter("");
key = key_alloc(&key_type_rxrpc, "x",
GLOBAL_ROOT_UID, GLOBAL_ROOT_GID, cred, 0,
KEY_ALLOC_NOT_IN_QUOTA);
if (IS_ERR(key)) {
_leave(" = -ENOMEM [alloc %ld]", PTR_ERR(key));
return -ENOMEM;
}
_debug("key %d", key_serial(key));
data.kver = 1;
data.v1.security_index = RXRPC_SECURITY_RXKAD;
data.v1.ticket_length = 0;
data.v1.expiry = expiry;
data.v1.kvno = 0;
memcpy(&data.v1.session_key, session_key, sizeof(data.v1.session_key));
ret = key_instantiate_and_link(key, &data, sizeof(data), NULL, NULL);
if (ret < 0)
goto error;
conn->key = key;
_leave(" = 0 [%d]", key_serial(key));
return 0;
error:
key_revoke(key);
key_put(key);
_leave(" = -ENOMEM [ins %d]", ret);
return -ENOMEM;
}
EXPORT_SYMBOL(rxrpc_get_server_data_key);
/**
* rxrpc_get_null_key - Generate a null RxRPC key
* @keyname: The name to give the key.
*
* Generate a null RxRPC key that can be used to indicate anonymous security is
* required for a particular domain.
*/
struct key *rxrpc_get_null_key(const char *keyname)
{
CRED: Inaugurate COW credentials Inaugurate copy-on-write credentials management. This uses RCU to manage the credentials pointer in the task_struct with respect to accesses by other tasks. A process may only modify its own credentials, and so does not need locking to access or modify its own credentials. A mutex (cred_replace_mutex) is added to the task_struct to control the effect of PTRACE_ATTACHED on credential calculations, particularly with respect to execve(). With this patch, the contents of an active credentials struct may not be changed directly; rather a new set of credentials must be prepared, modified and committed using something like the following sequence of events: struct cred *new = prepare_creds(); int ret = blah(new); if (ret < 0) { abort_creds(new); return ret; } return commit_creds(new); There are some exceptions to this rule: the keyrings pointed to by the active credentials may be instantiated - keyrings violate the COW rule as managing COW keyrings is tricky, given that it is possible for a task to directly alter the keys in a keyring in use by another task. To help enforce this, various pointers to sets of credentials, such as those in the task_struct, are declared const. The purpose of this is compile-time discouragement of altering credentials through those pointers. Once a set of credentials has been made public through one of these pointers, it may not be modified, except under special circumstances: (1) Its reference count may incremented and decremented. (2) The keyrings to which it points may be modified, but not replaced. The only safe way to modify anything else is to create a replacement and commit using the functions described in Documentation/credentials.txt (which will be added by a later patch). This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). This now prepares and commits credentials in various places in the security code rather than altering the current creds directly. (2) Temporary credential overrides. do_coredump() and sys_faccessat() now prepare their own credentials and temporarily override the ones currently on the acting thread, whilst preventing interference from other threads by holding cred_replace_mutex on the thread being dumped. This will be replaced in a future patch by something that hands down the credentials directly to the functions being called, rather than altering the task's objective credentials. (3) LSM interface. A number of functions have been changed, added or removed: (*) security_capset_check(), ->capset_check() (*) security_capset_set(), ->capset_set() Removed in favour of security_capset(). (*) security_capset(), ->capset() New. This is passed a pointer to the new creds, a pointer to the old creds and the proposed capability sets. It should fill in the new creds or return an error. All pointers, barring the pointer to the new creds, are now const. (*) security_bprm_apply_creds(), ->bprm_apply_creds() Changed; now returns a value, which will cause the process to be killed if it's an error. (*) security_task_alloc(), ->task_alloc_security() Removed in favour of security_prepare_creds(). (*) security_cred_free(), ->cred_free() New. Free security data attached to cred->security. (*) security_prepare_creds(), ->cred_prepare() New. Duplicate any security data attached to cred->security. (*) security_commit_creds(), ->cred_commit() New. Apply any security effects for the upcoming installation of new security by commit_creds(). (*) security_task_post_setuid(), ->task_post_setuid() Removed in favour of security_task_fix_setuid(). (*) security_task_fix_setuid(), ->task_fix_setuid() Fix up the proposed new credentials for setuid(). This is used by cap_set_fix_setuid() to implicitly adjust capabilities in line with setuid() changes. Changes are made to the new credentials, rather than the task itself as in security_task_post_setuid(). (*) security_task_reparent_to_init(), ->task_reparent_to_init() Removed. Instead the task being reparented to init is referred directly to init's credentials. NOTE! This results in the loss of some state: SELinux's osid no longer records the sid of the thread that forked it. (*) security_key_alloc(), ->key_alloc() (*) security_key_permission(), ->key_permission() Changed. These now take cred pointers rather than task pointers to refer to the security context. (4) sys_capset(). This has been simplified and uses less locking. The LSM functions it calls have been merged. (5) reparent_to_kthreadd(). This gives the current thread the same credentials as init by simply using commit_thread() to point that way. (6) __sigqueue_alloc() and switch_uid() __sigqueue_alloc() can't stop the target task from changing its creds beneath it, so this function gets a reference to the currently applicable user_struct which it then passes into the sigqueue struct it returns if successful. switch_uid() is now called from commit_creds(), and possibly should be folded into that. commit_creds() should take care of protecting __sigqueue_alloc(). (7) [sg]et[ug]id() and co and [sg]et_current_groups. The set functions now all use prepare_creds(), commit_creds() and abort_creds() to build and check a new set of credentials before applying it. security_task_set[ug]id() is called inside the prepared section. This guarantees that nothing else will affect the creds until we've finished. The calling of set_dumpable() has been moved into commit_creds(). Much of the functionality of set_user() has been moved into commit_creds(). The get functions all simply access the data directly. (8) security_task_prctl() and cap_task_prctl(). security_task_prctl() has been modified to return -ENOSYS if it doesn't want to handle a function, or otherwise return the return value directly rather than through an argument. Additionally, cap_task_prctl() now prepares a new set of credentials, even if it doesn't end up using it. (9) Keyrings. A number of changes have been made to the keyrings code: (a) switch_uid_keyring(), copy_keys(), exit_keys() and suid_keys() have all been dropped and built in to the credentials functions directly. They may want separating out again later. (b) key_alloc() and search_process_keyrings() now take a cred pointer rather than a task pointer to specify the security context. (c) copy_creds() gives a new thread within the same thread group a new thread keyring if its parent had one, otherwise it discards the thread keyring. (d) The authorisation key now points directly to the credentials to extend the search into rather pointing to the task that carries them. (e) Installing thread, process or session keyrings causes a new set of credentials to be created, even though it's not strictly necessary for process or session keyrings (they're shared). (10) Usermode helper. The usermode helper code now carries a cred struct pointer in its subprocess_info struct instead of a new session keyring pointer. This set of credentials is derived from init_cred and installed on the new process after it has been cloned. call_usermodehelper_setup() allocates the new credentials and call_usermodehelper_freeinfo() discards them if they haven't been used. A special cred function (prepare_usermodeinfo_creds()) is provided specifically for call_usermodehelper_setup() to call. call_usermodehelper_setkeys() adjusts the credentials to sport the supplied keyring as the new session keyring. (11) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) selinux_setprocattr() no longer does its check for whether the current ptracer can access processes with the new SID inside the lock that covers getting the ptracer's SID. Whilst this lock ensures that the check is done with the ptracer pinned, the result is only valid until the lock is released, so there's no point doing it inside the lock. (12) is_single_threaded(). This function has been extracted from selinux_setprocattr() and put into a file of its own in the lib/ directory as join_session_keyring() now wants to use it too. The code in SELinux just checked to see whether a task shared mm_structs with other tasks (CLONE_VM), but that isn't good enough. We really want to know if they're part of the same thread group (CLONE_THREAD). (13) nfsd. The NFS server daemon now has to use the COW credentials to set the credentials it is going to use. It really needs to pass the credentials down to the functions it calls, but it can't do that until other patches in this series have been applied. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 23:39:23 +00:00
const struct cred *cred = current_cred();
struct key *key;
int ret;
key = key_alloc(&key_type_rxrpc, keyname,
GLOBAL_ROOT_UID, GLOBAL_ROOT_GID, cred,
KEY_POS_SEARCH, KEY_ALLOC_NOT_IN_QUOTA);
if (IS_ERR(key))
return key;
ret = key_instantiate_and_link(key, NULL, 0, NULL, NULL);
if (ret < 0) {
key_revoke(key);
key_put(key);
return ERR_PTR(ret);
}
return key;
}
EXPORT_SYMBOL(rxrpc_get_null_key);
/*
* read the contents of an rxrpc key
* - this returns the result in XDR form
*/
static long rxrpc_read(const struct key *key,
char __user *buffer, size_t buflen)
{
const struct rxrpc_key_token *token;
const struct krb5_principal *princ;
size_t size;
__be32 __user *xdr, *oldxdr;
u32 cnlen, toksize, ntoks, tok, zero;
u16 toksizes[AFSTOKEN_MAX];
int loop;
_enter("");
/* we don't know what form we should return non-AFS keys in */
if (memcmp(key->description, "afs@", 4) != 0)
return -EOPNOTSUPP;
cnlen = strlen(key->description + 4);
#define RND(X) (((X) + 3) & ~3)
/* AFS keys we return in XDR form, so we need to work out the size of
* the XDR */
size = 2 * 4; /* flags, cellname len */
size += RND(cnlen); /* cellname */
size += 1 * 4; /* token count */
ntoks = 0;
for (token = key->payload.data; token; token = token->next) {
toksize = 4; /* sec index */
switch (token->security_index) {
case RXRPC_SECURITY_RXKAD:
toksize += 8 * 4; /* viceid, kvno, key*2, begin,
* end, primary, tktlen */
toksize += RND(token->kad->ticket_len);
break;
case RXRPC_SECURITY_RXK5:
princ = &token->k5->client;
toksize += 4 + princ->n_name_parts * 4;
for (loop = 0; loop < princ->n_name_parts; loop++)
toksize += RND(strlen(princ->name_parts[loop]));
toksize += 4 + RND(strlen(princ->realm));
princ = &token->k5->server;
toksize += 4 + princ->n_name_parts * 4;
for (loop = 0; loop < princ->n_name_parts; loop++)
toksize += RND(strlen(princ->name_parts[loop]));
toksize += 4 + RND(strlen(princ->realm));
toksize += 8 + RND(token->k5->session.data_len);
toksize += 4 * 8 + 2 * 4;
toksize += 4 + token->k5->n_addresses * 8;
for (loop = 0; loop < token->k5->n_addresses; loop++)
toksize += RND(token->k5->addresses[loop].data_len);
toksize += 4 + RND(token->k5->ticket_len);
toksize += 4 + RND(token->k5->ticket2_len);
toksize += 4 + token->k5->n_authdata * 8;
for (loop = 0; loop < token->k5->n_authdata; loop++)
toksize += RND(token->k5->authdata[loop].data_len);
break;
default: /* we have a ticket we can't encode */
BUG();
continue;
}
_debug("token[%u]: toksize=%u", ntoks, toksize);
ASSERTCMP(toksize, <=, AFSTOKEN_LENGTH_MAX);
toksizes[ntoks++] = toksize;
size += toksize + 4; /* each token has a length word */
}
#undef RND
if (!buffer || buflen < size)
return size;
xdr = (__be32 __user *) buffer;
zero = 0;
#define ENCODE(x) \
do { \
__be32 y = htonl(x); \
if (put_user(y, xdr++) < 0) \
goto fault; \
} while(0)
#define ENCODE_DATA(l, s) \
do { \
u32 _l = (l); \
ENCODE(l); \
if (copy_to_user(xdr, (s), _l) != 0) \
goto fault; \
if (_l & 3 && \
copy_to_user((u8 __user *)xdr + _l, &zero, 4 - (_l & 3)) != 0) \
goto fault; \
xdr += (_l + 3) >> 2; \
} while(0)
#define ENCODE64(x) \
do { \
__be64 y = cpu_to_be64(x); \
if (copy_to_user(xdr, &y, 8) != 0) \
goto fault; \
xdr += 8 >> 2; \
} while(0)
#define ENCODE_STR(s) \
do { \
const char *_s = (s); \
ENCODE_DATA(strlen(_s), _s); \
} while(0)
ENCODE(0); /* flags */
ENCODE_DATA(cnlen, key->description + 4); /* cellname */
ENCODE(ntoks);
tok = 0;
for (token = key->payload.data; token; token = token->next) {
toksize = toksizes[tok++];
ENCODE(toksize);
oldxdr = xdr;
ENCODE(token->security_index);
switch (token->security_index) {
case RXRPC_SECURITY_RXKAD:
ENCODE(token->kad->vice_id);
ENCODE(token->kad->kvno);
ENCODE_DATA(8, token->kad->session_key);
ENCODE(token->kad->start);
ENCODE(token->kad->expiry);
ENCODE(token->kad->primary_flag);
ENCODE_DATA(token->kad->ticket_len, token->kad->ticket);
break;
case RXRPC_SECURITY_RXK5:
princ = &token->k5->client;
ENCODE(princ->n_name_parts);
for (loop = 0; loop < princ->n_name_parts; loop++)
ENCODE_STR(princ->name_parts[loop]);
ENCODE_STR(princ->realm);
princ = &token->k5->server;
ENCODE(princ->n_name_parts);
for (loop = 0; loop < princ->n_name_parts; loop++)
ENCODE_STR(princ->name_parts[loop]);
ENCODE_STR(princ->realm);
ENCODE(token->k5->session.tag);
ENCODE_DATA(token->k5->session.data_len,
token->k5->session.data);
ENCODE64(token->k5->authtime);
ENCODE64(token->k5->starttime);
ENCODE64(token->k5->endtime);
ENCODE64(token->k5->renew_till);
ENCODE(token->k5->is_skey);
ENCODE(token->k5->flags);
ENCODE(token->k5->n_addresses);
for (loop = 0; loop < token->k5->n_addresses; loop++) {
ENCODE(token->k5->addresses[loop].tag);
ENCODE_DATA(token->k5->addresses[loop].data_len,
token->k5->addresses[loop].data);
}
ENCODE_DATA(token->k5->ticket_len, token->k5->ticket);
ENCODE_DATA(token->k5->ticket2_len, token->k5->ticket2);
ENCODE(token->k5->n_authdata);
for (loop = 0; loop < token->k5->n_authdata; loop++) {
ENCODE(token->k5->authdata[loop].tag);
ENCODE_DATA(token->k5->authdata[loop].data_len,
token->k5->authdata[loop].data);
}
break;
default:
BUG();
break;
}
ASSERTCMP((unsigned long)xdr - (unsigned long)oldxdr, ==,
toksize);
}
#undef ENCODE_STR
#undef ENCODE_DATA
#undef ENCODE64
#undef ENCODE
ASSERTCMP(tok, ==, ntoks);
ASSERTCMP((char __user *) xdr - buffer, ==, size);
_leave(" = %zu", size);
return size;
fault:
_leave(" = -EFAULT");
return -EFAULT;
}