mirror of
https://github.com/torvalds/linux.git
synced 2024-12-05 18:41:23 +00:00
459 lines
18 KiB
ReStructuredText
459 lines
18 KiB
ReStructuredText
|
.. SPDX-License-Identifier: GPL-2.0
|
||
|
.. include:: <isonum.txt>
|
||
|
|
||
|
========================================================
|
||
|
Adaptec Aic7xxx Fast -> Ultra160 Family Manager Set v7.0
|
||
|
========================================================
|
||
|
|
||
|
README for The Linux Operating System
|
||
|
|
||
|
The following information is available in this file:
|
||
|
|
||
|
1. Supported Hardware
|
||
|
2. Version History
|
||
|
3. Command Line Options
|
||
|
4. Contacting Adaptec
|
||
|
|
||
|
1. Supported Hardware
|
||
|
=====================
|
||
|
|
||
|
The following Adaptec SCSI Chips and Host Adapters are supported by
|
||
|
the aic7xxx driver.
|
||
|
|
||
|
======== ===== ========= ======== ========= ===== ===============
|
||
|
Chip MIPS Host Bus MaxSync MaxWidth SCBs Notes
|
||
|
======== ===== ========= ======== ========= ===== ===============
|
||
|
aic7770 10 EISA/VL 10MHz 16Bit 4 1
|
||
|
aic7850 10 PCI/32 10MHz 8Bit 3
|
||
|
aic7855 10 PCI/32 10MHz 8Bit 3
|
||
|
aic7856 10 PCI/32 10MHz 8Bit 3
|
||
|
aic7859 10 PCI/32 20MHz 8Bit 3
|
||
|
aic7860 10 PCI/32 20MHz 8Bit 3
|
||
|
aic7870 10 PCI/32 10MHz 16Bit 16
|
||
|
aic7880 10 PCI/32 20MHz 16Bit 16
|
||
|
aic7890 20 PCI/32 40MHz 16Bit 16 3 4 5 6 7 8
|
||
|
aic7891 20 PCI/64 40MHz 16Bit 16 3 4 5 6 7 8
|
||
|
aic7892 20 PCI/64-66 80MHz 16Bit 16 3 4 5 6 7 8
|
||
|
aic7895 15 PCI/32 20MHz 16Bit 16 2 3 4 5
|
||
|
aic7895C 15 PCI/32 20MHz 16Bit 16 2 3 4 5 8
|
||
|
aic7896 20 PCI/32 40MHz 16Bit 16 2 3 4 5 6 7 8
|
||
|
aic7897 20 PCI/64 40MHz 16Bit 16 2 3 4 5 6 7 8
|
||
|
aic7899 20 PCI/64-66 80MHz 16Bit 16 2 3 4 5 6 7 8
|
||
|
======== ===== ========= ======== ========= ===== ===============
|
||
|
|
||
|
1. Multiplexed Twin Channel Device - One controller servicing two
|
||
|
busses.
|
||
|
2. Multi-function Twin Channel Device - Two controllers on one chip.
|
||
|
3. Command Channel Secondary DMA Engine - Allows scatter gather list
|
||
|
and SCB prefetch.
|
||
|
4. 64 Byte SCB Support - Allows disconnected, untagged request table
|
||
|
for all possible target/lun combinations.
|
||
|
5. Block Move Instruction Support - Doubles the speed of certain
|
||
|
sequencer operations.
|
||
|
6. 'Bayonet' style Scatter Gather Engine - Improves S/G prefetch
|
||
|
performance.
|
||
|
7. Queuing Registers - Allows queuing of new transactions without
|
||
|
pausing the sequencer.
|
||
|
8. Multiple Target IDs - Allows the controller to respond to selection
|
||
|
as a target on multiple SCSI IDs.
|
||
|
|
||
|
============== ======= =========== =============== =============== =========
|
||
|
Controller Chip Host-Bus Int-Connectors Ext-Connectors Notes
|
||
|
============== ======= =========== =============== =============== =========
|
||
|
AHA-274X[A] aic7770 EISA SE-50M SE-HD50F
|
||
|
AHA-274X[A]W aic7770 EISA SE-HD68F SE-HD68F
|
||
|
SE-50M
|
||
|
AHA-274X[A]T aic7770 EISA 2 X SE-50M SE-HD50F
|
||
|
AHA-2842 aic7770 VL SE-50M SE-HD50F
|
||
|
AHA-2940AU aic7860 PCI/32 SE-50M SE-HD50F
|
||
|
AVA-2902I aic7860 PCI/32 SE-50M
|
||
|
AVA-2902E aic7860 PCI/32 SE-50M
|
||
|
AVA-2906 aic7856 PCI/32 SE-50M SE-DB25F
|
||
|
APC-7850 aic7850 PCI/32 SE-50M 1
|
||
|
AVA-2940 aic7860 PCI/32 SE-50M
|
||
|
AHA-2920B aic7860 PCI/32 SE-50M
|
||
|
AHA-2930B aic7860 PCI/32 SE-50M
|
||
|
AHA-2920C aic7856 PCI/32 SE-50M SE-HD50F
|
||
|
AHA-2930C aic7860 PCI/32 SE-50M
|
||
|
AHA-2930C aic7860 PCI/32 SE-50M
|
||
|
AHA-2910C aic7860 PCI/32 SE-50M
|
||
|
AHA-2915C aic7860 PCI/32 SE-50M
|
||
|
AHA-2940AU/CN aic7860 PCI/32 SE-50M SE-HD50F
|
||
|
AHA-2944W aic7870 PCI/32 HVD-HD68F HVD-HD68F
|
||
|
HVD-50M
|
||
|
AHA-3940W aic7870 PCI/32 2 X SE-HD68F SE-HD68F 2
|
||
|
AHA-2940UW aic7880 PCI/32 SE-HD68F
|
||
|
SE-50M SE-HD68F
|
||
|
AHA-2940U aic7880 PCI/32 SE-50M SE-HD50F
|
||
|
AHA-2940D aic7880 PCI/32
|
||
|
aHA-2940 A/T aic7880 PCI/32
|
||
|
AHA-2940D A/T aic7880 PCI/32
|
||
|
AHA-3940UW aic7880 PCI/32 2 X SE-HD68F SE-HD68F 3
|
||
|
AHA-3940UWD aic7880 PCI/32 2 X SE-HD68F 2 X SE-VHD68F 3
|
||
|
AHA-3940U aic7880 PCI/32 2 X SE-50M SE-HD50F 3
|
||
|
AHA-2944UW aic7880 PCI/32 HVD-HD68F HVD-HD68F
|
||
|
HVD-50M
|
||
|
AHA-3944UWD aic7880 PCI/32 2 X HVD-HD68F 2 X HVD-VHD68F 3
|
||
|
AHA-4944UW aic7880 PCI/32
|
||
|
AHA-2930UW aic7880 PCI/32
|
||
|
AHA-2940UW Pro aic7880 PCI/32 SE-HD68F SE-HD68F 4
|
||
|
SE-50M
|
||
|
AHA-2940UW/CN aic7880 PCI/32
|
||
|
AHA-2940UDual aic7895 PCI/32
|
||
|
AHA-2940UWDual aic7895 PCI/32
|
||
|
AHA-3940UWD aic7895 PCI/32
|
||
|
AHA-3940AUW aic7895 PCI/32
|
||
|
AHA-3940AUWD aic7895 PCI/32
|
||
|
AHA-3940AU aic7895 PCI/32
|
||
|
AHA-3944AUWD aic7895 PCI/32 2 X HVD-HD68F 2 X HVD-VHD68F
|
||
|
AHA-2940U2B aic7890 PCI/32 LVD-HD68F LVD-HD68F
|
||
|
AHA-2940U2 OEM aic7891 PCI/64
|
||
|
AHA-2940U2W aic7890 PCI/32 LVD-HD68F LVD-HD68F
|
||
|
SE-HD68F
|
||
|
SE-50M
|
||
|
AHA-2950U2B aic7891 PCI/64 LVD-HD68F LVD-HD68F
|
||
|
AHA-2930U2 aic7890 PCI/32 LVD-HD68F SE-HD50F
|
||
|
SE-50M
|
||
|
AHA-3950U2B aic7897 PCI/64
|
||
|
AHA-3950U2D aic7897 PCI/64
|
||
|
AHA-29160 aic7892 PCI/64-66
|
||
|
AHA-29160 CPQ aic7892 PCI/64-66
|
||
|
AHA-29160N aic7892 PCI/32 LVD-HD68F SE-HD50F
|
||
|
SE-50M
|
||
|
AHA-29160LP aic7892 PCI/64-66
|
||
|
AHA-19160 aic7892 PCI/64-66
|
||
|
AHA-29150LP aic7892 PCI/64-66
|
||
|
AHA-29130LP aic7892 PCI/64-66
|
||
|
AHA-3960D aic7899 PCI/64-66 2 X LVD-HD68F 2 X LVD-VHD68F
|
||
|
LVD-50M
|
||
|
AHA-3960D CPQ aic7899 PCI/64-66 2 X LVD-HD68F 2 X LVD-VHD68F
|
||
|
LVD-50M
|
||
|
AHA-39160 aic7899 PCI/64-66 2 X LVD-HD68F 2 X LVD-VHD68F
|
||
|
LVD-50M
|
||
|
============== ======= =========== =============== =============== =========
|
||
|
|
||
|
1. No BIOS support
|
||
|
2. DEC21050 PCI-PCI bridge with multiple controller chips on secondary bus
|
||
|
3. DEC2115X PCI-PCI bridge with multiple controller chips on secondary bus
|
||
|
4. All three SCSI connectors may be used simultaneously without
|
||
|
SCSI "stub" effects.
|
||
|
|
||
|
2. Version History
|
||
|
==================
|
||
|
|
||
|
* 7.0 (4th August, 2005)
|
||
|
- Updated driver to use SCSI transport class infrastructure
|
||
|
- Upported sequencer and core fixes from last adaptec released
|
||
|
version of the driver.
|
||
|
|
||
|
* 6.2.36 (June 3rd, 2003)
|
||
|
- Correct code that disables PCI parity error checking.
|
||
|
- Correct and simplify handling of the ignore wide residue
|
||
|
message. The previous code would fail to report a residual
|
||
|
if the transaction data length was even and we received
|
||
|
an IWR message.
|
||
|
- Add support for the 2.5.X EISA framework.
|
||
|
- Update for change in 2.5.X SCSI proc FS interface.
|
||
|
- Correct Domain Validation command-line option parsing.
|
||
|
- When negotiation async via an 8bit WDTR message, send
|
||
|
an SDTR with an offset of 0 to be sure the target
|
||
|
knows we are async. This works around a firmware defect
|
||
|
in the Quantum Atlas 10K.
|
||
|
- Clear PCI error state during driver attach so that we
|
||
|
don't disable memory mapped I/O due to a stray write
|
||
|
by some other driver probe that occurred before we
|
||
|
claimed the controller.
|
||
|
|
||
|
* 6.2.35 (May 14th, 2003)
|
||
|
- Fix a few GCC 3.3 compiler warnings.
|
||
|
- Correct operation on EISA Twin Channel controller.
|
||
|
- Add support for 2.5.X's scsi_report_device_reset().
|
||
|
|
||
|
* 6.2.34 (May 5th, 2003)
|
||
|
- Fix locking regression introduced in 6.2.29 that
|
||
|
could cause a lock order reversal between the io_request_lock
|
||
|
and our per-softc lock. This was only possible on RH9,
|
||
|
SuSE, and kernel.org 2.4.X kernels.
|
||
|
|
||
|
* 6.2.33 (April 30th, 2003)
|
||
|
- Dynamically disable PCI parity error reporting after
|
||
|
10 errors are reported to the user. These errors are
|
||
|
the result of some other device issuing PCI transactions
|
||
|
with bad parity. Once the user has been informed of the
|
||
|
problem, continuing to report the errors just degrades
|
||
|
our performance.
|
||
|
|
||
|
* 6.2.32 (March 28th, 2003)
|
||
|
- Dynamically sized S/G lists to avoid SCSI malloc
|
||
|
pool fragmentation and SCSI mid-layer deadlock.
|
||
|
|
||
|
* 6.2.28 (January 20th, 2003)
|
||
|
- Domain Validation Fixes
|
||
|
- Add ability to disable PCI parity error checking.
|
||
|
- Enhanced Memory Mapped I/O probe
|
||
|
|
||
|
* 6.2.20 (November 7th, 2002)
|
||
|
- Added Domain Validation.
|
||
|
|
||
|
3. Command Line Options
|
||
|
=======================
|
||
|
|
||
|
|
||
|
.. Warning::
|
||
|
|
||
|
ALTERING OR ADDING THESE DRIVER PARAMETERS
|
||
|
INCORRECTLY CAN RENDER YOUR SYSTEM INOPERABLE.
|
||
|
USE THEM WITH CAUTION.
|
||
|
|
||
|
Put a .conf file in the /etc/modprobe.d directory and add/edit a
|
||
|
line containing ``options aic7xxx aic7xxx=[command[,command...]]`` where
|
||
|
``command`` is one or more of the following:
|
||
|
|
||
|
verbose
|
||
|
|
||
|
:Definition: enable additional informative messages during driver operation.
|
||
|
:Possible Values: This option is a flag
|
||
|
:Default Value: disabled
|
||
|
|
||
|
|
||
|
debug:[value]
|
||
|
|
||
|
:Definition: Enables various levels of debugging information
|
||
|
:Possible Values: 0x0000 = no debugging, 0xffff = full debugging
|
||
|
:Default Value: 0x0000
|
||
|
|
||
|
no_probe
|
||
|
|
||
|
probe_eisa_vl
|
||
|
|
||
|
:Definition: Do not probe for EISA/VLB controllers.
|
||
|
This is a toggle. If the driver is compiled
|
||
|
to not probe EISA/VLB controllers by default,
|
||
|
specifying "no_probe" will enable this probing.
|
||
|
If the driver is compiled to probe EISA/VLB
|
||
|
controllers by default, specifying "no_probe"
|
||
|
will disable this probing.
|
||
|
|
||
|
:Possible Values: This option is a toggle
|
||
|
:Default Value: EISA/VLB probing is disabled by default.
|
||
|
|
||
|
pci_parity
|
||
|
|
||
|
:Definition: Toggles the detection of PCI parity errors.
|
||
|
On many motherboards with VIA chipsets,
|
||
|
PCI parity is not generated correctly on the
|
||
|
PCI bus. It is impossible for the hardware to
|
||
|
differentiate between these "spurious" parity
|
||
|
errors and real parity errors. The symptom of
|
||
|
this problem is a stream of the message::
|
||
|
|
||
|
"scsi0: Data Parity Error Detected during address or write data phase"
|
||
|
|
||
|
output by the driver.
|
||
|
|
||
|
:Possible Values: This option is a toggle
|
||
|
:Default Value: PCI Parity Error reporting is disabled
|
||
|
|
||
|
no_reset
|
||
|
|
||
|
:Definition: Do not reset the bus during the initial probe
|
||
|
phase
|
||
|
|
||
|
:Possible Values: This option is a flag
|
||
|
:Default Value: disabled
|
||
|
|
||
|
extended
|
||
|
|
||
|
:Definition: Force extended translation on the controller
|
||
|
:Possible Values: This option is a flag
|
||
|
:Default Value: disabled
|
||
|
|
||
|
periodic_otag
|
||
|
|
||
|
:Definition: Send an ordered tag periodically to prevent
|
||
|
tag starvation. Needed for some older devices
|
||
|
|
||
|
:Possible Values: This option is a flag
|
||
|
:Default Value: disabled
|
||
|
|
||
|
reverse_scan
|
||
|
|
||
|
:Definition: Probe the scsi bus in reverse order, starting
|
||
|
with target 15
|
||
|
|
||
|
:Possible Values: This option is a flag
|
||
|
:Default Value: disabled
|
||
|
|
||
|
global_tag_depth:[value]
|
||
|
|
||
|
:Definition: Global tag depth for all targets on all busses.
|
||
|
This option sets the default tag depth which
|
||
|
may be selectively overridden vi the tag_info
|
||
|
option.
|
||
|
|
||
|
:Possible Values: 1 - 253
|
||
|
:Default Value: 32
|
||
|
|
||
|
tag_info:{{value[,value...]}[,{value[,value...]}...]}
|
||
|
|
||
|
:Definition: Set the per-target tagged queue depth on a
|
||
|
per controller basis. Both controllers and targets
|
||
|
may be omitted indicating that they should retain
|
||
|
the default tag depth.
|
||
|
|
||
|
:Possible Values: 1 - 253
|
||
|
:Default Value: 32
|
||
|
|
||
|
Examples:
|
||
|
|
||
|
::
|
||
|
|
||
|
tag_info:{{16,32,32,64,8,8,,32,32,32,32,32,32,32,32,32}
|
||
|
|
||
|
On Controller 0:
|
||
|
|
||
|
- specifies a tag depth of 16 for target 0
|
||
|
- specifies a tag depth of 64 for target 3
|
||
|
- specifies a tag depth of 8 for targets 4 and 5
|
||
|
- leaves target 6 at the default
|
||
|
- specifies a tag depth of 32 for targets 1,2,7-15
|
||
|
- All other targets retain the default depth.
|
||
|
|
||
|
::
|
||
|
|
||
|
tag_info:{{},{32,,32}}
|
||
|
|
||
|
On Controller 1:
|
||
|
|
||
|
- specifies a tag depth of 32 for targets 0 and 2
|
||
|
- All other targets retain the default depth.
|
||
|
|
||
|
seltime:[value]
|
||
|
|
||
|
:Definition: Specifies the selection timeout value
|
||
|
:Possible Values: 0 = 256ms, 1 = 128ms, 2 = 64ms, 3 = 32ms
|
||
|
:Default Value: 0
|
||
|
|
||
|
dv: {value[,value...]}
|
||
|
|
||
|
:Definition: Set Domain Validation Policy on a per-controller basis.
|
||
|
Controllers may be omitted indicating that
|
||
|
they should retain the default read streaming setting.
|
||
|
|
||
|
:Possible Values:
|
||
|
|
||
|
==== ===============================
|
||
|
< 0 Use setting from serial EEPROM.
|
||
|
0 Disable DV
|
||
|
> 0 Enable DV
|
||
|
==== ===============================
|
||
|
|
||
|
|
||
|
:Default Value: SCSI-Select setting on controllers with a SCSI Select
|
||
|
option for DV. Otherwise, on for controllers supporting
|
||
|
U160 speeds and off for all other controller types.
|
||
|
|
||
|
Example:
|
||
|
|
||
|
::
|
||
|
|
||
|
dv:{-1,0,,1,1,0}
|
||
|
|
||
|
- On Controller 0 leave DV at its default setting.
|
||
|
- On Controller 1 disable DV.
|
||
|
- Skip configuration on Controller 2.
|
||
|
- On Controllers 3 and 4 enable DV.
|
||
|
- On Controller 5 disable DV.
|
||
|
|
||
|
Example::
|
||
|
|
||
|
options aic7xxx aic7xxx=verbose,no_probe,tag_info:{{},{,,10}},seltime:1
|
||
|
|
||
|
enables verbose logging, Disable EISA/VLB probing,
|
||
|
and set tag depth on Controller 1/Target 2 to 10 tags.
|
||
|
|
||
|
4. Adaptec Customer Support
|
||
|
===========================
|
||
|
|
||
|
A Technical Support Identification (TSID) Number is required for
|
||
|
Adaptec technical support.
|
||
|
|
||
|
- The 12-digit TSID can be found on the white barcode-type label
|
||
|
included inside the box with your product. The TSID helps us
|
||
|
provide more efficient service by accurately identifying your
|
||
|
product and support status.
|
||
|
|
||
|
Support Options
|
||
|
- Search the Adaptec Support Knowledgebase (ASK) at
|
||
|
http://ask.adaptec.com for articles, troubleshooting tips, and
|
||
|
frequently asked questions about your product.
|
||
|
- For support via Email, submit your question to Adaptec's
|
||
|
Technical Support Specialists at http://ask.adaptec.com/.
|
||
|
|
||
|
North America
|
||
|
- Visit our Web site at http://www.adaptec.com/.
|
||
|
- For information about Adaptec's support options, call
|
||
|
408-957-2550, 24 hours a day, 7 days a week.
|
||
|
- To speak with a Technical Support Specialist,
|
||
|
|
||
|
* For hardware products, call 408-934-7274,
|
||
|
Monday to Friday, 3:00 am to 5:00 pm, PDT.
|
||
|
* For RAID and Fibre Channel products, call 321-207-2000,
|
||
|
Monday to Friday, 3:00 am to 5:00 pm, PDT.
|
||
|
|
||
|
To expedite your service, have your computer with you.
|
||
|
- To order Adaptec products, including accessories and cables,
|
||
|
call 408-957-7274. To order cables online go to
|
||
|
http://www.adaptec.com/buy-cables/.
|
||
|
|
||
|
Europe
|
||
|
- Visit our Web site at http://www.adaptec.com/en-US/_common/world_index.
|
||
|
- To speak with a Technical Support Specialist, call, or email,
|
||
|
|
||
|
* German: +49 89 4366 5522, Monday-Friday, 9:00-17:00 CET,
|
||
|
http://ask-de.adaptec.com/.
|
||
|
* French: +49 89 4366 5533, Monday-Friday, 9:00-17:00 CET,
|
||
|
http://ask-fr.adaptec.com/.
|
||
|
* English: +49 89 4366 5544, Monday-Friday, 9:00-17:00 GMT,
|
||
|
http://ask.adaptec.com/.
|
||
|
|
||
|
- You can order Adaptec cables online at
|
||
|
http://www.adaptec.com/buy-cables/.
|
||
|
|
||
|
Japan
|
||
|
- Visit our web site at http://www.adaptec.co.jp/.
|
||
|
- To speak with a Technical Support Specialist, call
|
||
|
+81 3 5308 6120, Monday-Friday, 9:00 a.m. to 12:00 p.m.,
|
||
|
1:00 p.m. to 6:00 p.m.
|
||
|
|
||
|
Copyright |copy| 2003 Adaptec Inc. 691 S. Milpitas Blvd., Milpitas CA 95035 USA.
|
||
|
|
||
|
All rights reserved.
|
||
|
|
||
|
You are permitted to redistribute, use and modify this README file in whole
|
||
|
or in part in conjunction with redistribution of software governed by the
|
||
|
General Public License, provided that the following conditions are met:
|
||
|
|
||
|
1. Redistributions of README file must retain the above copyright
|
||
|
notice, this list of conditions, and the following disclaimer,
|
||
|
without modification.
|
||
|
2. The name of the author may not be used to endorse or promote products
|
||
|
derived from this software without specific prior written permission.
|
||
|
3. Modifications or new contributions must be attributed in a copyright
|
||
|
notice identifying the author ("Contributor") and added below the
|
||
|
original copyright notice. The copyright notice is for purposes of
|
||
|
identifying contributors and should not be deemed as permission to alter
|
||
|
the permissions given by Adaptec.
|
||
|
|
||
|
THIS README FILE IS PROVIDED BY ADAPTEC AND CONTRIBUTORS ``AS IS`` AND
|
||
|
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ANY
|
||
|
WARRANTIES OF NON-INFRINGEMENT OR THE IMPLIED WARRANTIES OF MERCHANTABILITY
|
||
|
AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
|
||
|
ADAPTEC OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
||
|
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
|
||
|
TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
|
||
|
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||
|
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||
|
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS README
|
||
|
FILE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|