linux/arch/powerpc/kernel/fadump.c

1500 lines
41 KiB
C
Raw Normal View History

/*
* Firmware Assisted dump: A robust mechanism to get reliable kernel crash
* dump with assistance from firmware. This approach does not use kexec,
* instead firmware assists in booting the kdump kernel while preserving
* memory contents. The most of the code implementation has been adapted
* from phyp assisted dump implementation written by Linas Vepstas and
* Manish Ahuja
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
* Copyright 2011 IBM Corporation
* Author: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
*/
#undef DEBUG
#define pr_fmt(fmt) "fadump: " fmt
#include <linux/string.h>
#include <linux/memblock.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
fadump: Initialize elfcore header and add PT_LOAD program headers. Build the crash memory range list by traversing through system memory during the first kernel before we register for firmware-assisted dump. After the successful dump registration, initialize the elfcore header and populate PT_LOAD program headers with crash memory ranges. The elfcore header is saved in the scratch area within the reserved memory. The scratch area starts at the end of the memory reserved for saving RMR region contents. The scratch area contains fadump crash info structure that contains magic number for fadump validation and physical address where the eflcore header can be found. This structure will also be used to pass some important crash info data to the second kernel which will help second kernel to populate ELF core header with correct data before it gets exported through /proc/vmcore. Since the firmware preserves the entire partition memory at the time of crash the contents of the scratch area will be preserved till second kernel boot. Since the memory dump exported through /proc/vmcore is in ELF format similar to kdump, it will help us to reuse the kdump infrastructure for dump capture and filtering. Unlike phyp dump, userspace tool does not need to refer any sysfs interface while reading /proc/vmcore. NOTE: The current design implementation does not address a possibility of introducing additional fields (in future) to this structure without affecting compatibility. It's on TODO list to come up with better approach to address this. Reserved dump area start => +-------------------------------------+ | CPU state dump data | +-------------------------------------+ | HPTE region data | +-------------------------------------+ | RMR region data | Scratch area start => +-------------------------------------+ | fadump crash info structure { | | magic nummber | +------|---- elfcorehdr_addr | | | } | +----> +-------------------------------------+ | ELF core header | Reserved dump area end => +-------------------------------------+ Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-02-16 01:14:37 +00:00
#include <linux/crash_dump.h>
#include <linux/kobject.h>
#include <linux/sysfs.h>
#include <asm/debugfs.h>
#include <asm/page.h>
#include <asm/prom.h>
#include <asm/rtas.h>
#include <asm/fadump.h>
#include <asm/setup.h>
static struct fw_dump fw_dump;
static struct fadump_mem_struct fdm;
static const struct fadump_mem_struct *fdm_active;
static DEFINE_MUTEX(fadump_mutex);
fadump: Initialize elfcore header and add PT_LOAD program headers. Build the crash memory range list by traversing through system memory during the first kernel before we register for firmware-assisted dump. After the successful dump registration, initialize the elfcore header and populate PT_LOAD program headers with crash memory ranges. The elfcore header is saved in the scratch area within the reserved memory. The scratch area starts at the end of the memory reserved for saving RMR region contents. The scratch area contains fadump crash info structure that contains magic number for fadump validation and physical address where the eflcore header can be found. This structure will also be used to pass some important crash info data to the second kernel which will help second kernel to populate ELF core header with correct data before it gets exported through /proc/vmcore. Since the firmware preserves the entire partition memory at the time of crash the contents of the scratch area will be preserved till second kernel boot. Since the memory dump exported through /proc/vmcore is in ELF format similar to kdump, it will help us to reuse the kdump infrastructure for dump capture and filtering. Unlike phyp dump, userspace tool does not need to refer any sysfs interface while reading /proc/vmcore. NOTE: The current design implementation does not address a possibility of introducing additional fields (in future) to this structure without affecting compatibility. It's on TODO list to come up with better approach to address this. Reserved dump area start => +-------------------------------------+ | CPU state dump data | +-------------------------------------+ | HPTE region data | +-------------------------------------+ | RMR region data | Scratch area start => +-------------------------------------+ | fadump crash info structure { | | magic nummber | +------|---- elfcorehdr_addr | | | } | +----> +-------------------------------------+ | ELF core header | Reserved dump area end => +-------------------------------------+ Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-02-16 01:14:37 +00:00
struct fad_crash_memory_ranges crash_memory_ranges[INIT_CRASHMEM_RANGES];
int crash_mem_ranges;
/* Scan the Firmware Assisted dump configuration details. */
int __init early_init_dt_scan_fw_dump(unsigned long node,
const char *uname, int depth, void *data)
{
const __be32 *sections;
int i, num_sections;
int size;
const __be32 *token;
if (depth != 1 || strcmp(uname, "rtas") != 0)
return 0;
/*
* Check if Firmware Assisted dump is supported. if yes, check
* if dump has been initiated on last reboot.
*/
token = of_get_flat_dt_prop(node, "ibm,configure-kernel-dump", NULL);
if (!token)
return 1;
fw_dump.fadump_supported = 1;
fw_dump.ibm_configure_kernel_dump = be32_to_cpu(*token);
/*
* The 'ibm,kernel-dump' rtas node is present only if there is
* dump data waiting for us.
*/
fdm_active = of_get_flat_dt_prop(node, "ibm,kernel-dump", NULL);
if (fdm_active)
fw_dump.dump_active = 1;
/* Get the sizes required to store dump data for the firmware provided
* dump sections.
* For each dump section type supported, a 32bit cell which defines
* the ID of a supported section followed by two 32 bit cells which
* gives teh size of the section in bytes.
*/
sections = of_get_flat_dt_prop(node, "ibm,configure-kernel-dump-sizes",
&size);
if (!sections)
return 1;
num_sections = size / (3 * sizeof(u32));
for (i = 0; i < num_sections; i++, sections += 3) {
u32 type = (u32)of_read_number(sections, 1);
switch (type) {
case FADUMP_CPU_STATE_DATA:
fw_dump.cpu_state_data_size =
of_read_ulong(&sections[1], 2);
break;
case FADUMP_HPTE_REGION:
fw_dump.hpte_region_size =
of_read_ulong(&sections[1], 2);
break;
}
}
return 1;
}
/*
* If fadump is registered, check if the memory provided
* falls within boot memory area.
*/
int is_fadump_boot_memory_area(u64 addr, ulong size)
{
if (!fw_dump.dump_registered)
return 0;
return (addr + size) > RMA_START && addr <= fw_dump.boot_memory_size;
}
powerpc/powernv: Use kernel crash path for machine checks There are quite a few machine check exceptions that can be caused by kernel bugs. To make debugging easier, use the kernel crash path in cases of synchronous machine checks that occur in kernel mode, if that would not result in the machine going straight to panic or crash dump. There is a downside here that die()ing the process in kernel mode can still leave the system unstable. panic_on_oops will always force the system to fail-stop, so systems where that behaviour is important will still do the right thing. As a test, when triggering an i-side 0111b error (ifetch from foreign address) in kernel mode process context on POWER9, the kernel currently dies quickly like this: Severe Machine check interrupt [Not recovered] NIP [ffff000000000000]: 0xffff000000000000 Initiator: CPU Error type: Real address [Instruction fetch (foreign)] [ 127.426651616,0] OPAL: Reboot requested due to Platform error. Effective[ 127.426693712,3] OPAL: Reboot requested due to Platform error. address: ffff000000000000 opal: Reboot type 1 not supported Kernel panic - not syncing: PowerNV Unrecovered Machine Check CPU: 56 PID: 4425 Comm: syscall Tainted: G M 4.12.0-rc1-13857-ga4700a261072-dirty #35 Call Trace: [ 128.017988928,4] IPMI: BUG: Dropping ESEL on the floor due to buggy/mising code in OPAL for this BMC Rebooting in 10 seconds.. Trying to free IRQ 496 from IRQ context! After this patch, the process is killed and the kernel continues with this message, which gives enough information to identify the offending branch (i.e., with CFAR): Severe Machine check interrupt [Not recovered] NIP [ffff000000000000]: 0xffff000000000000 Initiator: CPU Error type: Real address [Instruction fetch (foreign)] Effective address: ffff000000000000 Oops: Machine check, sig: 7 [#1] SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 ... CPU: 22 PID: 4436 Comm: syscall Tainted: G M 4.12.0-rc1-13857-ga4700a261072-dirty #36 task: c000000932300000 task.stack: c000000932380000 NIP: ffff000000000000 LR: 00000000217706a4 CTR: ffff000000000000 REGS: c00000000fc8fd80 TRAP: 0200 Tainted: G M (4.12.0-rc1-13857-ga4700a261072-dirty) MSR: 90000000001c1003 <SF,HV,ME,RI,LE> CR: 24000484 XER: 20000000 CFAR: c000000000004c80 DAR: 0000000021770a90 DSISR: 0a000000 SOFTE: 1 GPR00: 0000000000001ebe 00007fffce4818b0 0000000021797f00 0000000000000000 GPR04: 00007fff8007ac24 0000000044000484 0000000000004000 00007fff801405e8 GPR08: 900000000280f033 0000000024000484 0000000000000000 0000000000000030 GPR12: 9000000000001003 00007fff801bc370 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR24: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR28: 00007fff801b0000 0000000000000000 00000000217707a0 00007fffce481918 NIP [ffff000000000000] 0xffff000000000000 LR [00000000217706a4] 0x217706a4 Call Trace: Instruction dump: XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-07-19 06:59:11 +00:00
int should_fadump_crash(void)
{
if (!fw_dump.dump_registered || !fw_dump.fadumphdr_addr)
return 0;
return 1;
}
int is_fadump_active(void)
{
return fw_dump.dump_active;
}
/*
* Returns 1, if there are no holes in boot memory area,
* 0 otherwise.
*/
static int is_boot_memory_area_contiguous(void)
{
struct memblock_region *reg;
unsigned long tstart, tend;
unsigned long start_pfn = PHYS_PFN(RMA_START);
unsigned long end_pfn = PHYS_PFN(RMA_START + fw_dump.boot_memory_size);
unsigned int ret = 0;
for_each_memblock(memory, reg) {
tstart = max(start_pfn, memblock_region_memory_base_pfn(reg));
tend = min(end_pfn, memblock_region_memory_end_pfn(reg));
if (tstart < tend) {
/* Memory hole from start_pfn to tstart */
if (tstart > start_pfn)
break;
if (tend == end_pfn) {
ret = 1;
break;
}
start_pfn = tend + 1;
}
}
return ret;
}
/* Print firmware assisted dump configurations for debugging purpose. */
static void fadump_show_config(void)
{
pr_debug("Support for firmware-assisted dump (fadump): %s\n",
(fw_dump.fadump_supported ? "present" : "no support"));
if (!fw_dump.fadump_supported)
return;
pr_debug("Fadump enabled : %s\n",
(fw_dump.fadump_enabled ? "yes" : "no"));
pr_debug("Dump Active : %s\n",
(fw_dump.dump_active ? "yes" : "no"));
pr_debug("Dump section sizes:\n");
pr_debug(" CPU state data size: %lx\n", fw_dump.cpu_state_data_size);
pr_debug(" HPTE region size : %lx\n", fw_dump.hpte_region_size);
pr_debug("Boot memory size : %lx\n", fw_dump.boot_memory_size);
}
static unsigned long init_fadump_mem_struct(struct fadump_mem_struct *fdm,
unsigned long addr)
{
if (!fdm)
return 0;
memset(fdm, 0, sizeof(struct fadump_mem_struct));
addr = addr & PAGE_MASK;
fdm->header.dump_format_version = cpu_to_be32(0x00000001);
fdm->header.dump_num_sections = cpu_to_be16(3);
fdm->header.dump_status_flag = 0;
fdm->header.offset_first_dump_section =
cpu_to_be32((u32)offsetof(struct fadump_mem_struct, cpu_state_data));
/*
* Fields for disk dump option.
* We are not using disk dump option, hence set these fields to 0.
*/
fdm->header.dd_block_size = 0;
fdm->header.dd_block_offset = 0;
fdm->header.dd_num_blocks = 0;
fdm->header.dd_offset_disk_path = 0;
/* set 0 to disable an automatic dump-reboot. */
fdm->header.max_time_auto = 0;
/* Kernel dump sections */
/* cpu state data section. */
fdm->cpu_state_data.request_flag = cpu_to_be32(FADUMP_REQUEST_FLAG);
fdm->cpu_state_data.source_data_type = cpu_to_be16(FADUMP_CPU_STATE_DATA);
fdm->cpu_state_data.source_address = 0;
fdm->cpu_state_data.source_len = cpu_to_be64(fw_dump.cpu_state_data_size);
fdm->cpu_state_data.destination_address = cpu_to_be64(addr);
addr += fw_dump.cpu_state_data_size;
/* hpte region section */
fdm->hpte_region.request_flag = cpu_to_be32(FADUMP_REQUEST_FLAG);
fdm->hpte_region.source_data_type = cpu_to_be16(FADUMP_HPTE_REGION);
fdm->hpte_region.source_address = 0;
fdm->hpte_region.source_len = cpu_to_be64(fw_dump.hpte_region_size);
fdm->hpte_region.destination_address = cpu_to_be64(addr);
addr += fw_dump.hpte_region_size;
/* RMA region section */
fdm->rmr_region.request_flag = cpu_to_be32(FADUMP_REQUEST_FLAG);
fdm->rmr_region.source_data_type = cpu_to_be16(FADUMP_REAL_MODE_REGION);
fdm->rmr_region.source_address = cpu_to_be64(RMA_START);
fdm->rmr_region.source_len = cpu_to_be64(fw_dump.boot_memory_size);
fdm->rmr_region.destination_address = cpu_to_be64(addr);
addr += fw_dump.boot_memory_size;
return addr;
}
/**
* fadump_calculate_reserve_size(): reserve variable boot area 5% of System RAM
*
* Function to find the largest memory size we need to reserve during early
* boot process. This will be the size of the memory that is required for a
* kernel to boot successfully.
*
* This function has been taken from phyp-assisted dump feature implementation.
*
* returns larger of 256MB or 5% rounded down to multiples of 256MB.
*
* TODO: Come up with better approach to find out more accurate memory size
* that is required for a kernel to boot successfully.
*
*/
static inline unsigned long fadump_calculate_reserve_size(void)
{
powerpc/fadump: reuse crashkernel parameter for fadump memory reservation fadump supports specifying memory to reserve for fadump's crash kernel with fadump_reserve_mem kernel parameter. This parameter currently supports passing a fixed memory size, like fadump_reserve_mem=<size> only. This patch aims to add support for other syntaxes like range-based memory size <range1>:<size1>[,<range2>:<size2>,<range3>:<size3>,...] which allows using the same parameter to boot the kernel with different system RAM sizes. As crashkernel parameter already supports the above mentioned syntaxes, this patch deprecates fadump_reserve_mem parameter and reuses crashkernel parameter instead, to specify memory for fadump's crash kernel memory reservation as well. If any offset is provided in crashkernel parameter, it will be ignored in case of fadump, as fadump reserves memory at end of RAM. Advantages using crashkernel parameter instead of fadump_reserve_mem parameter are one less kernel parameter overall, code reuse and support for multiple syntaxes to specify memory. Suggested-by: Dave Young <dyoung@redhat.com> Link: http://lkml.kernel.org/r/149035346749.6881.911095631212975718.stgit@hbathini.in.ibm.com Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com> Reviewed-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-08 22:56:28 +00:00
int ret;
unsigned long long base, size;
if (fw_dump.reserve_bootvar)
pr_warn("'fadump_reserve_mem=' parameter is deprecated in favor of 'crashkernel=' parameter.\n");
/*
powerpc/fadump: reuse crashkernel parameter for fadump memory reservation fadump supports specifying memory to reserve for fadump's crash kernel with fadump_reserve_mem kernel parameter. This parameter currently supports passing a fixed memory size, like fadump_reserve_mem=<size> only. This patch aims to add support for other syntaxes like range-based memory size <range1>:<size1>[,<range2>:<size2>,<range3>:<size3>,...] which allows using the same parameter to boot the kernel with different system RAM sizes. As crashkernel parameter already supports the above mentioned syntaxes, this patch deprecates fadump_reserve_mem parameter and reuses crashkernel parameter instead, to specify memory for fadump's crash kernel memory reservation as well. If any offset is provided in crashkernel parameter, it will be ignored in case of fadump, as fadump reserves memory at end of RAM. Advantages using crashkernel parameter instead of fadump_reserve_mem parameter are one less kernel parameter overall, code reuse and support for multiple syntaxes to specify memory. Suggested-by: Dave Young <dyoung@redhat.com> Link: http://lkml.kernel.org/r/149035346749.6881.911095631212975718.stgit@hbathini.in.ibm.com Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com> Reviewed-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-08 22:56:28 +00:00
* Check if the size is specified through crashkernel= cmdline
* option. If yes, then use that but ignore base as fadump reserves
* memory at a predefined offset.
*/
powerpc/fadump: reuse crashkernel parameter for fadump memory reservation fadump supports specifying memory to reserve for fadump's crash kernel with fadump_reserve_mem kernel parameter. This parameter currently supports passing a fixed memory size, like fadump_reserve_mem=<size> only. This patch aims to add support for other syntaxes like range-based memory size <range1>:<size1>[,<range2>:<size2>,<range3>:<size3>,...] which allows using the same parameter to boot the kernel with different system RAM sizes. As crashkernel parameter already supports the above mentioned syntaxes, this patch deprecates fadump_reserve_mem parameter and reuses crashkernel parameter instead, to specify memory for fadump's crash kernel memory reservation as well. If any offset is provided in crashkernel parameter, it will be ignored in case of fadump, as fadump reserves memory at end of RAM. Advantages using crashkernel parameter instead of fadump_reserve_mem parameter are one less kernel parameter overall, code reuse and support for multiple syntaxes to specify memory. Suggested-by: Dave Young <dyoung@redhat.com> Link: http://lkml.kernel.org/r/149035346749.6881.911095631212975718.stgit@hbathini.in.ibm.com Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com> Reviewed-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-08 22:56:28 +00:00
ret = parse_crashkernel(boot_command_line, memblock_phys_mem_size(),
&size, &base);
if (ret == 0 && size > 0) {
powerpc/fadump: Set an upper limit for boot memory size By default, 5% of system RAM is reserved for preserving boot memory. Alternatively, a user can specify the amount of memory to reserve. See Documentation/powerpc/firmware-assisted-dump.txt for details. In addition to the memory reserved for preserving boot memory, some more memory is reserved, to save HPTE region, CPU state data and ELF core headers. Memory Reservation during first kernel looks like below: Low memory Top of memory 0 boot memory size | | | |<--Reserved dump area -->| V V | Permanent Reservation V +-----------+----------/ /----------+---+----+-----------+----+ | | |CPU|HPTE| DUMP |ELF | +-----------+----------/ /----------+---+----+-----------+----+ | ^ | | \ / ------------------------------------------- Boot memory content gets transferred to reserved area by firmware at the time of crash This implicitly means that the sum of the sizes of boot memory, CPU state data, HPTE region, DUMP preserving area and ELF core headers can't be greater than the total memory size. But currently, a user is allowed to specify any value as boot memory size. So, the above rule is violated when a boot memory size around 50% of the total available memory is specified. As the kernel is not handling this currently, it may lead to undefined behavior. Fix it by setting an upper limit for boot memory size to 25% of the total available memory. Also, instead of using memblock_end_of_DRAM(), which doesn't take the holes, if any, in the memory layout into account, use memblock_phys_mem_size() to calculate the percentage of total available memory. Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-06-02 07:30:27 +00:00
unsigned long max_size;
if (fw_dump.reserve_bootvar)
pr_info("Using 'crashkernel=' parameter for memory reservation.\n");
powerpc/fadump: reuse crashkernel parameter for fadump memory reservation fadump supports specifying memory to reserve for fadump's crash kernel with fadump_reserve_mem kernel parameter. This parameter currently supports passing a fixed memory size, like fadump_reserve_mem=<size> only. This patch aims to add support for other syntaxes like range-based memory size <range1>:<size1>[,<range2>:<size2>,<range3>:<size3>,...] which allows using the same parameter to boot the kernel with different system RAM sizes. As crashkernel parameter already supports the above mentioned syntaxes, this patch deprecates fadump_reserve_mem parameter and reuses crashkernel parameter instead, to specify memory for fadump's crash kernel memory reservation as well. If any offset is provided in crashkernel parameter, it will be ignored in case of fadump, as fadump reserves memory at end of RAM. Advantages using crashkernel parameter instead of fadump_reserve_mem parameter are one less kernel parameter overall, code reuse and support for multiple syntaxes to specify memory. Suggested-by: Dave Young <dyoung@redhat.com> Link: http://lkml.kernel.org/r/149035346749.6881.911095631212975718.stgit@hbathini.in.ibm.com Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com> Reviewed-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-08 22:56:28 +00:00
fw_dump.reserve_bootvar = (unsigned long)size;
powerpc/fadump: Set an upper limit for boot memory size By default, 5% of system RAM is reserved for preserving boot memory. Alternatively, a user can specify the amount of memory to reserve. See Documentation/powerpc/firmware-assisted-dump.txt for details. In addition to the memory reserved for preserving boot memory, some more memory is reserved, to save HPTE region, CPU state data and ELF core headers. Memory Reservation during first kernel looks like below: Low memory Top of memory 0 boot memory size | | | |<--Reserved dump area -->| V V | Permanent Reservation V +-----------+----------/ /----------+---+----+-----------+----+ | | |CPU|HPTE| DUMP |ELF | +-----------+----------/ /----------+---+----+-----------+----+ | ^ | | \ / ------------------------------------------- Boot memory content gets transferred to reserved area by firmware at the time of crash This implicitly means that the sum of the sizes of boot memory, CPU state data, HPTE region, DUMP preserving area and ELF core headers can't be greater than the total memory size. But currently, a user is allowed to specify any value as boot memory size. So, the above rule is violated when a boot memory size around 50% of the total available memory is specified. As the kernel is not handling this currently, it may lead to undefined behavior. Fix it by setting an upper limit for boot memory size to 25% of the total available memory. Also, instead of using memblock_end_of_DRAM(), which doesn't take the holes, if any, in the memory layout into account, use memblock_phys_mem_size() to calculate the percentage of total available memory. Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-06-02 07:30:27 +00:00
/*
* Adjust if the boot memory size specified is above
* the upper limit.
*/
max_size = memblock_phys_mem_size() / MAX_BOOT_MEM_RATIO;
if (fw_dump.reserve_bootvar > max_size) {
fw_dump.reserve_bootvar = max_size;
pr_info("Adjusted boot memory size to %luMB\n",
(fw_dump.reserve_bootvar >> 20));
}
return fw_dump.reserve_bootvar;
} else if (fw_dump.reserve_bootvar) {
/*
* 'fadump_reserve_mem=' is being used to reserve memory
* for firmware-assisted dump.
*/
return fw_dump.reserve_bootvar;
powerpc/fadump: reuse crashkernel parameter for fadump memory reservation fadump supports specifying memory to reserve for fadump's crash kernel with fadump_reserve_mem kernel parameter. This parameter currently supports passing a fixed memory size, like fadump_reserve_mem=<size> only. This patch aims to add support for other syntaxes like range-based memory size <range1>:<size1>[,<range2>:<size2>,<range3>:<size3>,...] which allows using the same parameter to boot the kernel with different system RAM sizes. As crashkernel parameter already supports the above mentioned syntaxes, this patch deprecates fadump_reserve_mem parameter and reuses crashkernel parameter instead, to specify memory for fadump's crash kernel memory reservation as well. If any offset is provided in crashkernel parameter, it will be ignored in case of fadump, as fadump reserves memory at end of RAM. Advantages using crashkernel parameter instead of fadump_reserve_mem parameter are one less kernel parameter overall, code reuse and support for multiple syntaxes to specify memory. Suggested-by: Dave Young <dyoung@redhat.com> Link: http://lkml.kernel.org/r/149035346749.6881.911095631212975718.stgit@hbathini.in.ibm.com Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com> Reviewed-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-08 22:56:28 +00:00
}
/* divide by 20 to get 5% of value */
powerpc/fadump: Set an upper limit for boot memory size By default, 5% of system RAM is reserved for preserving boot memory. Alternatively, a user can specify the amount of memory to reserve. See Documentation/powerpc/firmware-assisted-dump.txt for details. In addition to the memory reserved for preserving boot memory, some more memory is reserved, to save HPTE region, CPU state data and ELF core headers. Memory Reservation during first kernel looks like below: Low memory Top of memory 0 boot memory size | | | |<--Reserved dump area -->| V V | Permanent Reservation V +-----------+----------/ /----------+---+----+-----------+----+ | | |CPU|HPTE| DUMP |ELF | +-----------+----------/ /----------+---+----+-----------+----+ | ^ | | \ / ------------------------------------------- Boot memory content gets transferred to reserved area by firmware at the time of crash This implicitly means that the sum of the sizes of boot memory, CPU state data, HPTE region, DUMP preserving area and ELF core headers can't be greater than the total memory size. But currently, a user is allowed to specify any value as boot memory size. So, the above rule is violated when a boot memory size around 50% of the total available memory is specified. As the kernel is not handling this currently, it may lead to undefined behavior. Fix it by setting an upper limit for boot memory size to 25% of the total available memory. Also, instead of using memblock_end_of_DRAM(), which doesn't take the holes, if any, in the memory layout into account, use memblock_phys_mem_size() to calculate the percentage of total available memory. Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-06-02 07:30:27 +00:00
size = memblock_phys_mem_size() / 20;
/* round it down in multiples of 256 */
size = size & ~0x0FFFFFFFUL;
/* Truncate to memory_limit. We don't want to over reserve the memory.*/
if (memory_limit && size > memory_limit)
size = memory_limit;
return (size > MIN_BOOT_MEM ? size : MIN_BOOT_MEM);
}
/*
* Calculate the total memory size required to be reserved for
* firmware-assisted dump registration.
*/
static unsigned long get_fadump_area_size(void)
{
unsigned long size = 0;
size += fw_dump.cpu_state_data_size;
size += fw_dump.hpte_region_size;
size += fw_dump.boot_memory_size;
fadump: Initialize elfcore header and add PT_LOAD program headers. Build the crash memory range list by traversing through system memory during the first kernel before we register for firmware-assisted dump. After the successful dump registration, initialize the elfcore header and populate PT_LOAD program headers with crash memory ranges. The elfcore header is saved in the scratch area within the reserved memory. The scratch area starts at the end of the memory reserved for saving RMR region contents. The scratch area contains fadump crash info structure that contains magic number for fadump validation and physical address where the eflcore header can be found. This structure will also be used to pass some important crash info data to the second kernel which will help second kernel to populate ELF core header with correct data before it gets exported through /proc/vmcore. Since the firmware preserves the entire partition memory at the time of crash the contents of the scratch area will be preserved till second kernel boot. Since the memory dump exported through /proc/vmcore is in ELF format similar to kdump, it will help us to reuse the kdump infrastructure for dump capture and filtering. Unlike phyp dump, userspace tool does not need to refer any sysfs interface while reading /proc/vmcore. NOTE: The current design implementation does not address a possibility of introducing additional fields (in future) to this structure without affecting compatibility. It's on TODO list to come up with better approach to address this. Reserved dump area start => +-------------------------------------+ | CPU state dump data | +-------------------------------------+ | HPTE region data | +-------------------------------------+ | RMR region data | Scratch area start => +-------------------------------------+ | fadump crash info structure { | | magic nummber | +------|---- elfcorehdr_addr | | | } | +----> +-------------------------------------+ | ELF core header | Reserved dump area end => +-------------------------------------+ Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-02-16 01:14:37 +00:00
size += sizeof(struct fadump_crash_info_header);
size += sizeof(struct elfhdr); /* ELF core header.*/
size += sizeof(struct elf_phdr); /* place holder for cpu notes */
fadump: Initialize elfcore header and add PT_LOAD program headers. Build the crash memory range list by traversing through system memory during the first kernel before we register for firmware-assisted dump. After the successful dump registration, initialize the elfcore header and populate PT_LOAD program headers with crash memory ranges. The elfcore header is saved in the scratch area within the reserved memory. The scratch area starts at the end of the memory reserved for saving RMR region contents. The scratch area contains fadump crash info structure that contains magic number for fadump validation and physical address where the eflcore header can be found. This structure will also be used to pass some important crash info data to the second kernel which will help second kernel to populate ELF core header with correct data before it gets exported through /proc/vmcore. Since the firmware preserves the entire partition memory at the time of crash the contents of the scratch area will be preserved till second kernel boot. Since the memory dump exported through /proc/vmcore is in ELF format similar to kdump, it will help us to reuse the kdump infrastructure for dump capture and filtering. Unlike phyp dump, userspace tool does not need to refer any sysfs interface while reading /proc/vmcore. NOTE: The current design implementation does not address a possibility of introducing additional fields (in future) to this structure without affecting compatibility. It's on TODO list to come up with better approach to address this. Reserved dump area start => +-------------------------------------+ | CPU state dump data | +-------------------------------------+ | HPTE region data | +-------------------------------------+ | RMR region data | Scratch area start => +-------------------------------------+ | fadump crash info structure { | | magic nummber | +------|---- elfcorehdr_addr | | | } | +----> +-------------------------------------+ | ELF core header | Reserved dump area end => +-------------------------------------+ Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-02-16 01:14:37 +00:00
/* Program headers for crash memory regions. */
size += sizeof(struct elf_phdr) * (memblock_num_regions(memory) + 2);
size = PAGE_ALIGN(size);
return size;
}
int __init fadump_reserve_mem(void)
{
unsigned long base, size, memory_boundary;
if (!fw_dump.fadump_enabled)
return 0;
if (!fw_dump.fadump_supported) {
printk(KERN_INFO "Firmware-assisted dump is not supported on"
" this hardware\n");
fw_dump.fadump_enabled = 0;
return 0;
}
/*
* Initialize boot memory size
* If dump is active then we have already calculated the size during
* first kernel.
*/
if (fdm_active)
fw_dump.boot_memory_size = be64_to_cpu(fdm_active->rmr_region.source_len);
else
fw_dump.boot_memory_size = fadump_calculate_reserve_size();
/*
* Calculate the memory boundary.
* If memory_limit is less than actual memory boundary then reserve
* the memory for fadump beyond the memory_limit and adjust the
* memory_limit accordingly, so that the running kernel can run with
* specified memory_limit.
*/
if (memory_limit && memory_limit < memblock_end_of_DRAM()) {
size = get_fadump_area_size();
if ((memory_limit + size) < memblock_end_of_DRAM())
memory_limit += size;
else
memory_limit = memblock_end_of_DRAM();
printk(KERN_INFO "Adjusted memory_limit for firmware-assisted"
" dump, now %#016llx\n", memory_limit);
}
if (memory_limit)
memory_boundary = memory_limit;
else
memory_boundary = memblock_end_of_DRAM();
if (fw_dump.dump_active) {
printk(KERN_INFO "Firmware-assisted dump is active.\n");
/*
* If last boot has crashed then reserve all the memory
* above boot_memory_size so that we don't touch it until
* dump is written to disk by userspace tool. This memory
* will be released for general use once the dump is saved.
*/
base = fw_dump.boot_memory_size;
size = memory_boundary - base;
memblock_reserve(base, size);
printk(KERN_INFO "Reserved %ldMB of memory at %ldMB "
"for saving crash dump\n",
(unsigned long)(size >> 20),
(unsigned long)(base >> 20));
fadump: Initialize elfcore header and add PT_LOAD program headers. Build the crash memory range list by traversing through system memory during the first kernel before we register for firmware-assisted dump. After the successful dump registration, initialize the elfcore header and populate PT_LOAD program headers with crash memory ranges. The elfcore header is saved in the scratch area within the reserved memory. The scratch area starts at the end of the memory reserved for saving RMR region contents. The scratch area contains fadump crash info structure that contains magic number for fadump validation and physical address where the eflcore header can be found. This structure will also be used to pass some important crash info data to the second kernel which will help second kernel to populate ELF core header with correct data before it gets exported through /proc/vmcore. Since the firmware preserves the entire partition memory at the time of crash the contents of the scratch area will be preserved till second kernel boot. Since the memory dump exported through /proc/vmcore is in ELF format similar to kdump, it will help us to reuse the kdump infrastructure for dump capture and filtering. Unlike phyp dump, userspace tool does not need to refer any sysfs interface while reading /proc/vmcore. NOTE: The current design implementation does not address a possibility of introducing additional fields (in future) to this structure without affecting compatibility. It's on TODO list to come up with better approach to address this. Reserved dump area start => +-------------------------------------+ | CPU state dump data | +-------------------------------------+ | HPTE region data | +-------------------------------------+ | RMR region data | Scratch area start => +-------------------------------------+ | fadump crash info structure { | | magic nummber | +------|---- elfcorehdr_addr | | | } | +----> +-------------------------------------+ | ELF core header | Reserved dump area end => +-------------------------------------+ Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-02-16 01:14:37 +00:00
fw_dump.fadumphdr_addr =
be64_to_cpu(fdm_active->rmr_region.destination_address) +
be64_to_cpu(fdm_active->rmr_region.source_len);
fadump: Initialize elfcore header and add PT_LOAD program headers. Build the crash memory range list by traversing through system memory during the first kernel before we register for firmware-assisted dump. After the successful dump registration, initialize the elfcore header and populate PT_LOAD program headers with crash memory ranges. The elfcore header is saved in the scratch area within the reserved memory. The scratch area starts at the end of the memory reserved for saving RMR region contents. The scratch area contains fadump crash info structure that contains magic number for fadump validation and physical address where the eflcore header can be found. This structure will also be used to pass some important crash info data to the second kernel which will help second kernel to populate ELF core header with correct data before it gets exported through /proc/vmcore. Since the firmware preserves the entire partition memory at the time of crash the contents of the scratch area will be preserved till second kernel boot. Since the memory dump exported through /proc/vmcore is in ELF format similar to kdump, it will help us to reuse the kdump infrastructure for dump capture and filtering. Unlike phyp dump, userspace tool does not need to refer any sysfs interface while reading /proc/vmcore. NOTE: The current design implementation does not address a possibility of introducing additional fields (in future) to this structure without affecting compatibility. It's on TODO list to come up with better approach to address this. Reserved dump area start => +-------------------------------------+ | CPU state dump data | +-------------------------------------+ | HPTE region data | +-------------------------------------+ | RMR region data | Scratch area start => +-------------------------------------+ | fadump crash info structure { | | magic nummber | +------|---- elfcorehdr_addr | | | } | +----> +-------------------------------------+ | ELF core header | Reserved dump area end => +-------------------------------------+ Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-02-16 01:14:37 +00:00
pr_debug("fadumphdr_addr = %p\n",
(void *) fw_dump.fadumphdr_addr);
} else {
size = get_fadump_area_size();
/*
* Reserve memory at an offset closer to bottom of the RAM to
* minimize the impact of memory hot-remove operation. We can't
* use memblock_find_in_range() here since it doesn't allocate
* from bottom to top.
*/
for (base = fw_dump.boot_memory_size;
base <= (memory_boundary - size);
base += size) {
if (memblock_is_region_memory(base, size) &&
!memblock_is_region_reserved(base, size))
break;
}
if ((base > (memory_boundary - size)) ||
memblock_reserve(base, size)) {
pr_err("Failed to reserve memory\n");
return 0;
}
pr_info("Reserved %ldMB of memory at %ldMB for firmware-"
"assisted dump (System RAM: %ldMB)\n",
(unsigned long)(size >> 20),
(unsigned long)(base >> 20),
(unsigned long)(memblock_phys_mem_size() >> 20));
}
fw_dump.reserve_dump_area_start = base;
fw_dump.reserve_dump_area_size = size;
return 1;
}
powerpc: implement arch_reserved_kernel_pages Currently significant amount of memory is reserved only in kernel booted to capture kernel dump using the fa_dump method. Kernels compiled with CONFIG_DEFERRED_STRUCT_PAGE_INIT will initialize only certain size memory per node. The certain size takes into account the dentry and inode cache sizes. Currently the cache sizes are calculated based on the total system memory including the reserved memory. However such a kernel when booting the same kernel as fadump kernel will not be able to allocate the required amount of memory to suffice for the dentry and inode caches. This results in crashes like Hence only implement arch_reserved_kernel_pages() for CONFIG_FA_DUMP configurations. The amount reserved will be reduced while calculating the large caches and will avoid crashes like the below on large systems such as 32 TB systems. Dentry cache hash table entries: 536870912 (order: 16, 4294967296 bytes) vmalloc: allocation failure, allocated 4097114112 of 17179934720 bytes swapper/0: page allocation failure: order:0, mode:0x2080020(GFP_ATOMIC) CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.6-master+ #3 Call Trace: dump_stack+0xb0/0xf0 (unreliable) warn_alloc_failed+0x114/0x160 __vmalloc_node_range+0x304/0x340 __vmalloc+0x6c/0x90 alloc_large_system_hash+0x1b8/0x2c0 inode_init+0x94/0xe4 vfs_caches_init+0x8c/0x13c start_kernel+0x50c/0x578 start_here_common+0x20/0xa8 Link: http://lkml.kernel.org/r/1472476010-4709-4-git-send-email-srikar@linux.vnet.ibm.com Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Suggested-by: Mel Gorman <mgorman@techsingularity.net> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Cc: Hari Bathini <hbathini@linux.vnet.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 23:59:21 +00:00
unsigned long __init arch_reserved_kernel_pages(void)
{
return memblock_reserved_size() / PAGE_SIZE;
}
/* Look for fadump= cmdline option. */
static int __init early_fadump_param(char *p)
{
if (!p)
return 1;
if (strncmp(p, "on", 2) == 0)
fw_dump.fadump_enabled = 1;
else if (strncmp(p, "off", 3) == 0)
fw_dump.fadump_enabled = 0;
return 0;
}
early_param("fadump", early_fadump_param);
/*
* Look for fadump_reserve_mem= cmdline option
* TODO: Remove references to 'fadump_reserve_mem=' parameter,
* the sooner 'crashkernel=' parameter is accustomed to.
*/
static int __init early_fadump_reserve_mem(char *p)
{
if (p)
fw_dump.reserve_bootvar = memparse(p, &p);
return 0;
}
early_param("fadump_reserve_mem", early_fadump_reserve_mem);
static int register_fw_dump(struct fadump_mem_struct *fdm)
{
int rc, err;
unsigned int wait_time;
pr_debug("Registering for firmware-assisted kernel dump...\n");
/* TODO: Add upper time limit for the delay */
do {
rc = rtas_call(fw_dump.ibm_configure_kernel_dump, 3, 1, NULL,
FADUMP_REGISTER, fdm,
sizeof(struct fadump_mem_struct));
wait_time = rtas_busy_delay_time(rc);
if (wait_time)
mdelay(wait_time);
} while (wait_time);
err = -EIO;
switch (rc) {
default:
pr_err("Failed to register. Unknown Error(%d).\n", rc);
break;
case -1:
printk(KERN_ERR "Failed to register firmware-assisted kernel"
" dump. Hardware Error(%d).\n", rc);
break;
case -3:
if (!is_boot_memory_area_contiguous())
pr_err("Can't have holes in boot memory area while "
"registering fadump\n");
printk(KERN_ERR "Failed to register firmware-assisted kernel"
" dump. Parameter Error(%d).\n", rc);
err = -EINVAL;
break;
case -9:
printk(KERN_ERR "firmware-assisted kernel dump is already "
" registered.");
fw_dump.dump_registered = 1;
err = -EEXIST;
break;
case 0:
printk(KERN_INFO "firmware-assisted kernel dump registration"
" is successful\n");
fw_dump.dump_registered = 1;
err = 0;
break;
}
return err;
}
void crash_fadump(struct pt_regs *regs, const char *str)
{
struct fadump_crash_info_header *fdh = NULL;
int old_cpu, this_cpu;
powerpc/powernv: Use kernel crash path for machine checks There are quite a few machine check exceptions that can be caused by kernel bugs. To make debugging easier, use the kernel crash path in cases of synchronous machine checks that occur in kernel mode, if that would not result in the machine going straight to panic or crash dump. There is a downside here that die()ing the process in kernel mode can still leave the system unstable. panic_on_oops will always force the system to fail-stop, so systems where that behaviour is important will still do the right thing. As a test, when triggering an i-side 0111b error (ifetch from foreign address) in kernel mode process context on POWER9, the kernel currently dies quickly like this: Severe Machine check interrupt [Not recovered] NIP [ffff000000000000]: 0xffff000000000000 Initiator: CPU Error type: Real address [Instruction fetch (foreign)] [ 127.426651616,0] OPAL: Reboot requested due to Platform error. Effective[ 127.426693712,3] OPAL: Reboot requested due to Platform error. address: ffff000000000000 opal: Reboot type 1 not supported Kernel panic - not syncing: PowerNV Unrecovered Machine Check CPU: 56 PID: 4425 Comm: syscall Tainted: G M 4.12.0-rc1-13857-ga4700a261072-dirty #35 Call Trace: [ 128.017988928,4] IPMI: BUG: Dropping ESEL on the floor due to buggy/mising code in OPAL for this BMC Rebooting in 10 seconds.. Trying to free IRQ 496 from IRQ context! After this patch, the process is killed and the kernel continues with this message, which gives enough information to identify the offending branch (i.e., with CFAR): Severe Machine check interrupt [Not recovered] NIP [ffff000000000000]: 0xffff000000000000 Initiator: CPU Error type: Real address [Instruction fetch (foreign)] Effective address: ffff000000000000 Oops: Machine check, sig: 7 [#1] SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 ... CPU: 22 PID: 4436 Comm: syscall Tainted: G M 4.12.0-rc1-13857-ga4700a261072-dirty #36 task: c000000932300000 task.stack: c000000932380000 NIP: ffff000000000000 LR: 00000000217706a4 CTR: ffff000000000000 REGS: c00000000fc8fd80 TRAP: 0200 Tainted: G M (4.12.0-rc1-13857-ga4700a261072-dirty) MSR: 90000000001c1003 <SF,HV,ME,RI,LE> CR: 24000484 XER: 20000000 CFAR: c000000000004c80 DAR: 0000000021770a90 DSISR: 0a000000 SOFTE: 1 GPR00: 0000000000001ebe 00007fffce4818b0 0000000021797f00 0000000000000000 GPR04: 00007fff8007ac24 0000000044000484 0000000000004000 00007fff801405e8 GPR08: 900000000280f033 0000000024000484 0000000000000000 0000000000000030 GPR12: 9000000000001003 00007fff801bc370 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR24: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR28: 00007fff801b0000 0000000000000000 00000000217707a0 00007fffce481918 NIP [ffff000000000000] 0xffff000000000000 LR [00000000217706a4] 0x217706a4 Call Trace: Instruction dump: XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-07-19 06:59:11 +00:00
if (!should_fadump_crash())
return;
/*
* old_cpu == -1 means this is the first CPU which has come here,
* go ahead and trigger fadump.
*
* old_cpu != -1 means some other CPU has already on it's way
* to trigger fadump, just keep looping here.
*/
this_cpu = smp_processor_id();
old_cpu = cmpxchg(&crashing_cpu, -1, this_cpu);
if (old_cpu != -1) {
/*
* We can't loop here indefinitely. Wait as long as fadump
* is in force. If we race with fadump un-registration this
* loop will break and then we go down to normal panic path
* and reboot. If fadump is in force the first crashing
* cpu will definitely trigger fadump.
*/
while (fw_dump.dump_registered)
cpu_relax();
return;
}
fdh = __va(fw_dump.fadumphdr_addr);
fdh->crashing_cpu = crashing_cpu;
crash_save_vmcoreinfo();
if (regs)
fdh->regs = *regs;
else
ppc_save_regs(&fdh->regs);
powerpc/fadump: rename cpu_online_mask member of struct fadump_crash_info_header The four cpumasks cpu_{possible,online,present,active}_bits are exposed readonly via the corresponding const variables cpu_xyz_mask. But they are also accessible for arbitrary writing via the exposed functions set_cpu_xyz. There's quite a bit of code throughout the kernel which iterates over or otherwise accesses these bitmaps, and having the access go via the cpu_xyz_mask variables is nowadays [1] simply a useless indirection. It may be that any problem in CS can be solved by an extra level of indirection, but that doesn't mean every extra indirection solves a problem. In this case, it even necessitates some minor ugliness (see 4/6). Patch 1/6 is new in v2, and fixes a build failure on ppc by renaming a struct member, to avoid problems when the identifier cpu_online_mask becomes a macro later in the series. The next four patches eliminate the cpu_xyz_mask variables by simply exposing the actual bitmaps, after renaming them to discourage direct access - that still happens through cpu_xyz_mask, which are now simply macros with the same type and value as they used to have. After that, there's no longer any reason to have the setter functions be out-of-line: The boolean parameter is almost always a literal true or false, so by making them static inlines they will usually compile to one or two instructions. For a defconfig build on x86_64, bloat-o-meter says we save ~3000 bytes. We also save a little stack (stackdelta says 127 functions have a 16 byte smaller stack frame, while two grow by that amount). Mostly because, when iterating over the mask, gcc typically loads the value of cpu_xyz_mask into a callee-saved register and from there into %rdi before each find_next_bit call - now it can just load the appropriate immediate address into %rdi before each call. [1] See Rusty's kind explanation http://thread.gmane.org/gmane.linux.kernel/2047078/focus=2047722 for some historic context. This patch (of 6): As preparation for eliminating the indirect access to the various global cpu_*_bits bitmaps via the pointer variables cpu_*_mask, rename the cpu_online_mask member of struct fadump_crash_info_header to simply online_mask, thus allowing cpu_online_mask to become a macro. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-20 23:00:13 +00:00
fdh->online_mask = *cpu_online_mask;
/* Call ibm,os-term rtas call to trigger firmware assisted dump */
rtas_os_term((char *)str);
}
#define GPR_MASK 0xffffff0000000000
static inline int fadump_gpr_index(u64 id)
{
int i = -1;
char str[3];
if ((id & GPR_MASK) == REG_ID("GPR")) {
/* get the digits at the end */
id &= ~GPR_MASK;
id >>= 24;
str[2] = '\0';
str[1] = id & 0xff;
str[0] = (id >> 8) & 0xff;
sscanf(str, "%d", &i);
if (i > 31)
i = -1;
}
return i;
}
static inline void fadump_set_regval(struct pt_regs *regs, u64 reg_id,
u64 reg_val)
{
int i;
i = fadump_gpr_index(reg_id);
if (i >= 0)
regs->gpr[i] = (unsigned long)reg_val;
else if (reg_id == REG_ID("NIA"))
regs->nip = (unsigned long)reg_val;
else if (reg_id == REG_ID("MSR"))
regs->msr = (unsigned long)reg_val;
else if (reg_id == REG_ID("CTR"))
regs->ctr = (unsigned long)reg_val;
else if (reg_id == REG_ID("LR"))
regs->link = (unsigned long)reg_val;
else if (reg_id == REG_ID("XER"))
regs->xer = (unsigned long)reg_val;
else if (reg_id == REG_ID("CR"))
regs->ccr = (unsigned long)reg_val;
else if (reg_id == REG_ID("DAR"))
regs->dar = (unsigned long)reg_val;
else if (reg_id == REG_ID("DSISR"))
regs->dsisr = (unsigned long)reg_val;
}
static struct fadump_reg_entry*
fadump_read_registers(struct fadump_reg_entry *reg_entry, struct pt_regs *regs)
{
memset(regs, 0, sizeof(struct pt_regs));
while (be64_to_cpu(reg_entry->reg_id) != REG_ID("CPUEND")) {
fadump_set_regval(regs, be64_to_cpu(reg_entry->reg_id),
be64_to_cpu(reg_entry->reg_value));
reg_entry++;
}
reg_entry++;
return reg_entry;
}
static u32 *fadump_regs_to_elf_notes(u32 *buf, struct pt_regs *regs)
{
struct elf_prstatus prstatus;
memset(&prstatus, 0, sizeof(prstatus));
/*
* FIXME: How do i get PID? Do I really need it?
* prstatus.pr_pid = ????
*/
elf_core_copy_kernel_regs(&prstatus.pr_reg, regs);
buf = append_elf_note(buf, CRASH_CORE_NOTE_NAME, NT_PRSTATUS,
&prstatus, sizeof(prstatus));
return buf;
}
static void fadump_update_elfcore_header(char *bufp)
{
struct elfhdr *elf;
struct elf_phdr *phdr;
elf = (struct elfhdr *)bufp;
bufp += sizeof(struct elfhdr);
/* First note is a place holder for cpu notes info. */
phdr = (struct elf_phdr *)bufp;
if (phdr->p_type == PT_NOTE) {
phdr->p_paddr = fw_dump.cpu_notes_buf;
phdr->p_offset = phdr->p_paddr;
phdr->p_filesz = fw_dump.cpu_notes_buf_size;
phdr->p_memsz = fw_dump.cpu_notes_buf_size;
}
return;
}
static void *fadump_cpu_notes_buf_alloc(unsigned long size)
{
void *vaddr;
struct page *page;
unsigned long order, count, i;
order = get_order(size);
vaddr = (void *)__get_free_pages(GFP_KERNEL|__GFP_ZERO, order);
if (!vaddr)
return NULL;
count = 1 << order;
page = virt_to_page(vaddr);
for (i = 0; i < count; i++)
SetPageReserved(page + i);
return vaddr;
}
static void fadump_cpu_notes_buf_free(unsigned long vaddr, unsigned long size)
{
struct page *page;
unsigned long order, count, i;
order = get_order(size);
count = 1 << order;
page = virt_to_page(vaddr);
for (i = 0; i < count; i++)
ClearPageReserved(page + i);
__free_pages(page, order);
}
/*
* Read CPU state dump data and convert it into ELF notes.
* The CPU dump starts with magic number "REGSAVE". NumCpusOffset should be
* used to access the data to allow for additional fields to be added without
* affecting compatibility. Each list of registers for a CPU starts with
* "CPUSTRT" and ends with "CPUEND". Each register entry is of 16 bytes,
* 8 Byte ASCII identifier and 8 Byte register value. The register entry
* with identifier "CPUSTRT" and "CPUEND" contains 4 byte cpu id as part
* of register value. For more details refer to PAPR document.
*
* Only for the crashing cpu we ignore the CPU dump data and get exact
* state from fadump crash info structure populated by first kernel at the
* time of crash.
*/
static int __init fadump_build_cpu_notes(const struct fadump_mem_struct *fdm)
{
struct fadump_reg_save_area_header *reg_header;
struct fadump_reg_entry *reg_entry;
struct fadump_crash_info_header *fdh = NULL;
void *vaddr;
unsigned long addr;
u32 num_cpus, *note_buf;
struct pt_regs regs;
int i, rc = 0, cpu = 0;
if (!fdm->cpu_state_data.bytes_dumped)
return -EINVAL;
addr = be64_to_cpu(fdm->cpu_state_data.destination_address);
vaddr = __va(addr);
reg_header = vaddr;
if (be64_to_cpu(reg_header->magic_number) != REGSAVE_AREA_MAGIC) {
printk(KERN_ERR "Unable to read register save area.\n");
return -ENOENT;
}
pr_debug("--------CPU State Data------------\n");
pr_debug("Magic Number: %llx\n", be64_to_cpu(reg_header->magic_number));
pr_debug("NumCpuOffset: %x\n", be32_to_cpu(reg_header->num_cpu_offset));
vaddr += be32_to_cpu(reg_header->num_cpu_offset);
num_cpus = be32_to_cpu(*((__be32 *)(vaddr)));
pr_debug("NumCpus : %u\n", num_cpus);
vaddr += sizeof(u32);
reg_entry = (struct fadump_reg_entry *)vaddr;
/* Allocate buffer to hold cpu crash notes. */
fw_dump.cpu_notes_buf_size = num_cpus * sizeof(note_buf_t);
fw_dump.cpu_notes_buf_size = PAGE_ALIGN(fw_dump.cpu_notes_buf_size);
note_buf = fadump_cpu_notes_buf_alloc(fw_dump.cpu_notes_buf_size);
if (!note_buf) {
printk(KERN_ERR "Failed to allocate 0x%lx bytes for "
"cpu notes buffer\n", fw_dump.cpu_notes_buf_size);
return -ENOMEM;
}
fw_dump.cpu_notes_buf = __pa(note_buf);
pr_debug("Allocated buffer for cpu notes of size %ld at %p\n",
(num_cpus * sizeof(note_buf_t)), note_buf);
if (fw_dump.fadumphdr_addr)
fdh = __va(fw_dump.fadumphdr_addr);
for (i = 0; i < num_cpus; i++) {
if (be64_to_cpu(reg_entry->reg_id) != REG_ID("CPUSTRT")) {
printk(KERN_ERR "Unable to read CPU state data\n");
rc = -ENOENT;
goto error_out;
}
/* Lower 4 bytes of reg_value contains logical cpu id */
cpu = be64_to_cpu(reg_entry->reg_value) & FADUMP_CPU_ID_MASK;
powerpc/fadump: rename cpu_online_mask member of struct fadump_crash_info_header The four cpumasks cpu_{possible,online,present,active}_bits are exposed readonly via the corresponding const variables cpu_xyz_mask. But they are also accessible for arbitrary writing via the exposed functions set_cpu_xyz. There's quite a bit of code throughout the kernel which iterates over or otherwise accesses these bitmaps, and having the access go via the cpu_xyz_mask variables is nowadays [1] simply a useless indirection. It may be that any problem in CS can be solved by an extra level of indirection, but that doesn't mean every extra indirection solves a problem. In this case, it even necessitates some minor ugliness (see 4/6). Patch 1/6 is new in v2, and fixes a build failure on ppc by renaming a struct member, to avoid problems when the identifier cpu_online_mask becomes a macro later in the series. The next four patches eliminate the cpu_xyz_mask variables by simply exposing the actual bitmaps, after renaming them to discourage direct access - that still happens through cpu_xyz_mask, which are now simply macros with the same type and value as they used to have. After that, there's no longer any reason to have the setter functions be out-of-line: The boolean parameter is almost always a literal true or false, so by making them static inlines they will usually compile to one or two instructions. For a defconfig build on x86_64, bloat-o-meter says we save ~3000 bytes. We also save a little stack (stackdelta says 127 functions have a 16 byte smaller stack frame, while two grow by that amount). Mostly because, when iterating over the mask, gcc typically loads the value of cpu_xyz_mask into a callee-saved register and from there into %rdi before each find_next_bit call - now it can just load the appropriate immediate address into %rdi before each call. [1] See Rusty's kind explanation http://thread.gmane.org/gmane.linux.kernel/2047078/focus=2047722 for some historic context. This patch (of 6): As preparation for eliminating the indirect access to the various global cpu_*_bits bitmaps via the pointer variables cpu_*_mask, rename the cpu_online_mask member of struct fadump_crash_info_header to simply online_mask, thus allowing cpu_online_mask to become a macro. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-20 23:00:13 +00:00
if (fdh && !cpumask_test_cpu(cpu, &fdh->online_mask)) {
SKIP_TO_NEXT_CPU(reg_entry);
continue;
}
pr_debug("Reading register data for cpu %d...\n", cpu);
if (fdh && fdh->crashing_cpu == cpu) {
regs = fdh->regs;
note_buf = fadump_regs_to_elf_notes(note_buf, &regs);
SKIP_TO_NEXT_CPU(reg_entry);
} else {
reg_entry++;
reg_entry = fadump_read_registers(reg_entry, &regs);
note_buf = fadump_regs_to_elf_notes(note_buf, &regs);
}
}
final_note(note_buf);
if (fdh) {
pr_debug("Updating elfcore header (%llx) with cpu notes\n",
fdh->elfcorehdr_addr);
fadump_update_elfcore_header((char *)__va(fdh->elfcorehdr_addr));
}
return 0;
error_out:
fadump_cpu_notes_buf_free((unsigned long)__va(fw_dump.cpu_notes_buf),
fw_dump.cpu_notes_buf_size);
fw_dump.cpu_notes_buf = 0;
fw_dump.cpu_notes_buf_size = 0;
return rc;
}
fadump: Initialize elfcore header and add PT_LOAD program headers. Build the crash memory range list by traversing through system memory during the first kernel before we register for firmware-assisted dump. After the successful dump registration, initialize the elfcore header and populate PT_LOAD program headers with crash memory ranges. The elfcore header is saved in the scratch area within the reserved memory. The scratch area starts at the end of the memory reserved for saving RMR region contents. The scratch area contains fadump crash info structure that contains magic number for fadump validation and physical address where the eflcore header can be found. This structure will also be used to pass some important crash info data to the second kernel which will help second kernel to populate ELF core header with correct data before it gets exported through /proc/vmcore. Since the firmware preserves the entire partition memory at the time of crash the contents of the scratch area will be preserved till second kernel boot. Since the memory dump exported through /proc/vmcore is in ELF format similar to kdump, it will help us to reuse the kdump infrastructure for dump capture and filtering. Unlike phyp dump, userspace tool does not need to refer any sysfs interface while reading /proc/vmcore. NOTE: The current design implementation does not address a possibility of introducing additional fields (in future) to this structure without affecting compatibility. It's on TODO list to come up with better approach to address this. Reserved dump area start => +-------------------------------------+ | CPU state dump data | +-------------------------------------+ | HPTE region data | +-------------------------------------+ | RMR region data | Scratch area start => +-------------------------------------+ | fadump crash info structure { | | magic nummber | +------|---- elfcorehdr_addr | | | } | +----> +-------------------------------------+ | ELF core header | Reserved dump area end => +-------------------------------------+ Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-02-16 01:14:37 +00:00
/*
* Validate and process the dump data stored by firmware before exporting
* it through '/proc/vmcore'.
*/
static int __init process_fadump(const struct fadump_mem_struct *fdm_active)
{
struct fadump_crash_info_header *fdh;
int rc = 0;
fadump: Initialize elfcore header and add PT_LOAD program headers. Build the crash memory range list by traversing through system memory during the first kernel before we register for firmware-assisted dump. After the successful dump registration, initialize the elfcore header and populate PT_LOAD program headers with crash memory ranges. The elfcore header is saved in the scratch area within the reserved memory. The scratch area starts at the end of the memory reserved for saving RMR region contents. The scratch area contains fadump crash info structure that contains magic number for fadump validation and physical address where the eflcore header can be found. This structure will also be used to pass some important crash info data to the second kernel which will help second kernel to populate ELF core header with correct data before it gets exported through /proc/vmcore. Since the firmware preserves the entire partition memory at the time of crash the contents of the scratch area will be preserved till second kernel boot. Since the memory dump exported through /proc/vmcore is in ELF format similar to kdump, it will help us to reuse the kdump infrastructure for dump capture and filtering. Unlike phyp dump, userspace tool does not need to refer any sysfs interface while reading /proc/vmcore. NOTE: The current design implementation does not address a possibility of introducing additional fields (in future) to this structure without affecting compatibility. It's on TODO list to come up with better approach to address this. Reserved dump area start => +-------------------------------------+ | CPU state dump data | +-------------------------------------+ | HPTE region data | +-------------------------------------+ | RMR region data | Scratch area start => +-------------------------------------+ | fadump crash info structure { | | magic nummber | +------|---- elfcorehdr_addr | | | } | +----> +-------------------------------------+ | ELF core header | Reserved dump area end => +-------------------------------------+ Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-02-16 01:14:37 +00:00
if (!fdm_active || !fw_dump.fadumphdr_addr)
return -EINVAL;
/* Check if the dump data is valid. */
if ((be16_to_cpu(fdm_active->header.dump_status_flag) == FADUMP_ERROR_FLAG) ||
(fdm_active->cpu_state_data.error_flags != 0) ||
fadump: Initialize elfcore header and add PT_LOAD program headers. Build the crash memory range list by traversing through system memory during the first kernel before we register for firmware-assisted dump. After the successful dump registration, initialize the elfcore header and populate PT_LOAD program headers with crash memory ranges. The elfcore header is saved in the scratch area within the reserved memory. The scratch area starts at the end of the memory reserved for saving RMR region contents. The scratch area contains fadump crash info structure that contains magic number for fadump validation and physical address where the eflcore header can be found. This structure will also be used to pass some important crash info data to the second kernel which will help second kernel to populate ELF core header with correct data before it gets exported through /proc/vmcore. Since the firmware preserves the entire partition memory at the time of crash the contents of the scratch area will be preserved till second kernel boot. Since the memory dump exported through /proc/vmcore is in ELF format similar to kdump, it will help us to reuse the kdump infrastructure for dump capture and filtering. Unlike phyp dump, userspace tool does not need to refer any sysfs interface while reading /proc/vmcore. NOTE: The current design implementation does not address a possibility of introducing additional fields (in future) to this structure without affecting compatibility. It's on TODO list to come up with better approach to address this. Reserved dump area start => +-------------------------------------+ | CPU state dump data | +-------------------------------------+ | HPTE region data | +-------------------------------------+ | RMR region data | Scratch area start => +-------------------------------------+ | fadump crash info structure { | | magic nummber | +------|---- elfcorehdr_addr | | | } | +----> +-------------------------------------+ | ELF core header | Reserved dump area end => +-------------------------------------+ Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-02-16 01:14:37 +00:00
(fdm_active->rmr_region.error_flags != 0)) {
printk(KERN_ERR "Dump taken by platform is not valid\n");
return -EINVAL;
}
if ((fdm_active->rmr_region.bytes_dumped !=
fdm_active->rmr_region.source_len) ||
!fdm_active->cpu_state_data.bytes_dumped) {
fadump: Initialize elfcore header and add PT_LOAD program headers. Build the crash memory range list by traversing through system memory during the first kernel before we register for firmware-assisted dump. After the successful dump registration, initialize the elfcore header and populate PT_LOAD program headers with crash memory ranges. The elfcore header is saved in the scratch area within the reserved memory. The scratch area starts at the end of the memory reserved for saving RMR region contents. The scratch area contains fadump crash info structure that contains magic number for fadump validation and physical address where the eflcore header can be found. This structure will also be used to pass some important crash info data to the second kernel which will help second kernel to populate ELF core header with correct data before it gets exported through /proc/vmcore. Since the firmware preserves the entire partition memory at the time of crash the contents of the scratch area will be preserved till second kernel boot. Since the memory dump exported through /proc/vmcore is in ELF format similar to kdump, it will help us to reuse the kdump infrastructure for dump capture and filtering. Unlike phyp dump, userspace tool does not need to refer any sysfs interface while reading /proc/vmcore. NOTE: The current design implementation does not address a possibility of introducing additional fields (in future) to this structure without affecting compatibility. It's on TODO list to come up with better approach to address this. Reserved dump area start => +-------------------------------------+ | CPU state dump data | +-------------------------------------+ | HPTE region data | +-------------------------------------+ | RMR region data | Scratch area start => +-------------------------------------+ | fadump crash info structure { | | magic nummber | +------|---- elfcorehdr_addr | | | } | +----> +-------------------------------------+ | ELF core header | Reserved dump area end => +-------------------------------------+ Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-02-16 01:14:37 +00:00
printk(KERN_ERR "Dump taken by platform is incomplete\n");
return -EINVAL;
}
/* Validate the fadump crash info header */
fdh = __va(fw_dump.fadumphdr_addr);
if (fdh->magic_number != FADUMP_CRASH_INFO_MAGIC) {
printk(KERN_ERR "Crash info header is not valid.\n");
return -EINVAL;
}
rc = fadump_build_cpu_notes(fdm_active);
if (rc)
return rc;
fadump: Initialize elfcore header and add PT_LOAD program headers. Build the crash memory range list by traversing through system memory during the first kernel before we register for firmware-assisted dump. After the successful dump registration, initialize the elfcore header and populate PT_LOAD program headers with crash memory ranges. The elfcore header is saved in the scratch area within the reserved memory. The scratch area starts at the end of the memory reserved for saving RMR region contents. The scratch area contains fadump crash info structure that contains magic number for fadump validation and physical address where the eflcore header can be found. This structure will also be used to pass some important crash info data to the second kernel which will help second kernel to populate ELF core header with correct data before it gets exported through /proc/vmcore. Since the firmware preserves the entire partition memory at the time of crash the contents of the scratch area will be preserved till second kernel boot. Since the memory dump exported through /proc/vmcore is in ELF format similar to kdump, it will help us to reuse the kdump infrastructure for dump capture and filtering. Unlike phyp dump, userspace tool does not need to refer any sysfs interface while reading /proc/vmcore. NOTE: The current design implementation does not address a possibility of introducing additional fields (in future) to this structure without affecting compatibility. It's on TODO list to come up with better approach to address this. Reserved dump area start => +-------------------------------------+ | CPU state dump data | +-------------------------------------+ | HPTE region data | +-------------------------------------+ | RMR region data | Scratch area start => +-------------------------------------+ | fadump crash info structure { | | magic nummber | +------|---- elfcorehdr_addr | | | } | +----> +-------------------------------------+ | ELF core header | Reserved dump area end => +-------------------------------------+ Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-02-16 01:14:37 +00:00
/*
* We are done validating dump info and elfcore header is now ready
* to be exported. set elfcorehdr_addr so that vmcore module will
* export the elfcore header through '/proc/vmcore'.
*/
elfcorehdr_addr = fdh->elfcorehdr_addr;
return 0;
}
static inline void fadump_add_crash_memory(unsigned long long base,
unsigned long long end)
{
if (base == end)
return;
pr_debug("crash_memory_range[%d] [%#016llx-%#016llx], %#llx bytes\n",
crash_mem_ranges, base, end - 1, (end - base));
crash_memory_ranges[crash_mem_ranges].base = base;
crash_memory_ranges[crash_mem_ranges].size = end - base;
crash_mem_ranges++;
}
static void fadump_exclude_reserved_area(unsigned long long start,
unsigned long long end)
{
unsigned long long ra_start, ra_end;
ra_start = fw_dump.reserve_dump_area_start;
ra_end = ra_start + fw_dump.reserve_dump_area_size;
if ((ra_start < end) && (ra_end > start)) {
if ((start < ra_start) && (end > ra_end)) {
fadump_add_crash_memory(start, ra_start);
fadump_add_crash_memory(ra_end, end);
} else if (start < ra_start) {
fadump_add_crash_memory(start, ra_start);
} else if (ra_end < end) {
fadump_add_crash_memory(ra_end, end);
}
} else
fadump_add_crash_memory(start, end);
}
static int fadump_init_elfcore_header(char *bufp)
{
struct elfhdr *elf;
elf = (struct elfhdr *) bufp;
bufp += sizeof(struct elfhdr);
memcpy(elf->e_ident, ELFMAG, SELFMAG);
elf->e_ident[EI_CLASS] = ELF_CLASS;
elf->e_ident[EI_DATA] = ELF_DATA;
elf->e_ident[EI_VERSION] = EV_CURRENT;
elf->e_ident[EI_OSABI] = ELF_OSABI;
memset(elf->e_ident+EI_PAD, 0, EI_NIDENT-EI_PAD);
elf->e_type = ET_CORE;
elf->e_machine = ELF_ARCH;
elf->e_version = EV_CURRENT;
elf->e_entry = 0;
elf->e_phoff = sizeof(struct elfhdr);
elf->e_shoff = 0;
#if defined(_CALL_ELF)
elf->e_flags = _CALL_ELF;
#else
elf->e_flags = 0;
#endif
fadump: Initialize elfcore header and add PT_LOAD program headers. Build the crash memory range list by traversing through system memory during the first kernel before we register for firmware-assisted dump. After the successful dump registration, initialize the elfcore header and populate PT_LOAD program headers with crash memory ranges. The elfcore header is saved in the scratch area within the reserved memory. The scratch area starts at the end of the memory reserved for saving RMR region contents. The scratch area contains fadump crash info structure that contains magic number for fadump validation and physical address where the eflcore header can be found. This structure will also be used to pass some important crash info data to the second kernel which will help second kernel to populate ELF core header with correct data before it gets exported through /proc/vmcore. Since the firmware preserves the entire partition memory at the time of crash the contents of the scratch area will be preserved till second kernel boot. Since the memory dump exported through /proc/vmcore is in ELF format similar to kdump, it will help us to reuse the kdump infrastructure for dump capture and filtering. Unlike phyp dump, userspace tool does not need to refer any sysfs interface while reading /proc/vmcore. NOTE: The current design implementation does not address a possibility of introducing additional fields (in future) to this structure without affecting compatibility. It's on TODO list to come up with better approach to address this. Reserved dump area start => +-------------------------------------+ | CPU state dump data | +-------------------------------------+ | HPTE region data | +-------------------------------------+ | RMR region data | Scratch area start => +-------------------------------------+ | fadump crash info structure { | | magic nummber | +------|---- elfcorehdr_addr | | | } | +----> +-------------------------------------+ | ELF core header | Reserved dump area end => +-------------------------------------+ Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-02-16 01:14:37 +00:00
elf->e_ehsize = sizeof(struct elfhdr);
elf->e_phentsize = sizeof(struct elf_phdr);
elf->e_phnum = 0;
elf->e_shentsize = 0;
elf->e_shnum = 0;
elf->e_shstrndx = 0;
return 0;
}
/*
* Traverse through memblock structure and setup crash memory ranges. These
* ranges will be used create PT_LOAD program headers in elfcore header.
*/
static void fadump_setup_crash_memory_ranges(void)
{
struct memblock_region *reg;
unsigned long long start, end;
pr_debug("Setup crash memory ranges.\n");
crash_mem_ranges = 0;
/*
* add the first memory chunk (RMA_START through boot_memory_size) as
* a separate memory chunk. The reason is, at the time crash firmware
* will move the content of this memory chunk to different location
* specified during fadump registration. We need to create a separate
* program header for this chunk with the correct offset.
*/
fadump_add_crash_memory(RMA_START, fw_dump.boot_memory_size);
for_each_memblock(memory, reg) {
start = (unsigned long long)reg->base;
end = start + (unsigned long long)reg->size;
powerpc/fadump: avoid duplicates in crash memory ranges fadump sets up crash memory ranges to be used for creating PT_LOAD program headers in elfcore header. Memory chunk RMA_START through boot memory area size is added as the first memory range because firmware, at the time of crash, moves this memory chunk to different location specified during fadump registration making it necessary to create a separate program header for it with the correct offset. This memory chunk is skipped while setting up the remaining memory ranges. But currently, there is possibility that some of this memory may have duplicate entries like when it is hot-removed and added again. Ensure that no two memory ranges represent the same memory. When 5 lmbs are hot-removed and then hot-plugged before registering fadump, here is how the program headers in /proc/vmcore exported by fadump look like without this change: Program Headers: Type Offset VirtAddr PhysAddr FileSiz MemSiz Flags Align NOTE 0x0000000000010000 0x0000000000000000 0x0000000000000000 0x0000000000001894 0x0000000000001894 0 LOAD 0x0000000000021020 0xc000000000000000 0x0000000000000000 0x0000000040000000 0x0000000040000000 RWE 0 LOAD 0x0000000040031020 0xc000000000000000 0x0000000000000000 0x0000000010000000 0x0000000010000000 RWE 0 LOAD 0x0000000050040000 0xc000000010000000 0x0000000010000000 0x0000000050000000 0x0000000050000000 RWE 0 LOAD 0x00000000a0040000 0xc000000060000000 0x0000000060000000 0x000000019ffe0000 0x000000019ffe0000 RWE 0 and with this change: Program Headers: Type Offset VirtAddr PhysAddr FileSiz MemSiz Flags Align NOTE 0x0000000000010000 0x0000000000000000 0x0000000000000000 0x0000000000001894 0x0000000000001894 0 LOAD 0x0000000000021020 0xc000000000000000 0x0000000000000000 0x0000000040000000 0x0000000040000000 RWE 0 LOAD 0x0000000040030000 0xc000000040000000 0x0000000040000000 0x0000000020000000 0x0000000020000000 RWE 0 LOAD 0x0000000060030000 0xc000000060000000 0x0000000060000000 0x000000019ffe0000 0x000000019ffe0000 RWE 0 Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com> Reviewed-by: Mahesh J Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-06-01 17:20:38 +00:00
/*
* skip the first memory chunk that is already added (RMA_START
* through boot_memory_size). This logic needs a relook if and
* when RMA_START changes to a non-zero value.
*/
BUILD_BUG_ON(RMA_START != 0);
if (start < fw_dump.boot_memory_size) {
if (end > fw_dump.boot_memory_size)
start = fw_dump.boot_memory_size;
else
continue;
}
fadump: Initialize elfcore header and add PT_LOAD program headers. Build the crash memory range list by traversing through system memory during the first kernel before we register for firmware-assisted dump. After the successful dump registration, initialize the elfcore header and populate PT_LOAD program headers with crash memory ranges. The elfcore header is saved in the scratch area within the reserved memory. The scratch area starts at the end of the memory reserved for saving RMR region contents. The scratch area contains fadump crash info structure that contains magic number for fadump validation and physical address where the eflcore header can be found. This structure will also be used to pass some important crash info data to the second kernel which will help second kernel to populate ELF core header with correct data before it gets exported through /proc/vmcore. Since the firmware preserves the entire partition memory at the time of crash the contents of the scratch area will be preserved till second kernel boot. Since the memory dump exported through /proc/vmcore is in ELF format similar to kdump, it will help us to reuse the kdump infrastructure for dump capture and filtering. Unlike phyp dump, userspace tool does not need to refer any sysfs interface while reading /proc/vmcore. NOTE: The current design implementation does not address a possibility of introducing additional fields (in future) to this structure without affecting compatibility. It's on TODO list to come up with better approach to address this. Reserved dump area start => +-------------------------------------+ | CPU state dump data | +-------------------------------------+ | HPTE region data | +-------------------------------------+ | RMR region data | Scratch area start => +-------------------------------------+ | fadump crash info structure { | | magic nummber | +------|---- elfcorehdr_addr | | | } | +----> +-------------------------------------+ | ELF core header | Reserved dump area end => +-------------------------------------+ Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-02-16 01:14:37 +00:00
/* add this range excluding the reserved dump area. */
fadump_exclude_reserved_area(start, end);
}
}
/*
* If the given physical address falls within the boot memory region then
* return the relocated address that points to the dump region reserved
* for saving initial boot memory contents.
*/
static inline unsigned long fadump_relocate(unsigned long paddr)
{
if (paddr > RMA_START && paddr < fw_dump.boot_memory_size)
return be64_to_cpu(fdm.rmr_region.destination_address) + paddr;
else
return paddr;
}
fadump: Initialize elfcore header and add PT_LOAD program headers. Build the crash memory range list by traversing through system memory during the first kernel before we register for firmware-assisted dump. After the successful dump registration, initialize the elfcore header and populate PT_LOAD program headers with crash memory ranges. The elfcore header is saved in the scratch area within the reserved memory. The scratch area starts at the end of the memory reserved for saving RMR region contents. The scratch area contains fadump crash info structure that contains magic number for fadump validation and physical address where the eflcore header can be found. This structure will also be used to pass some important crash info data to the second kernel which will help second kernel to populate ELF core header with correct data before it gets exported through /proc/vmcore. Since the firmware preserves the entire partition memory at the time of crash the contents of the scratch area will be preserved till second kernel boot. Since the memory dump exported through /proc/vmcore is in ELF format similar to kdump, it will help us to reuse the kdump infrastructure for dump capture and filtering. Unlike phyp dump, userspace tool does not need to refer any sysfs interface while reading /proc/vmcore. NOTE: The current design implementation does not address a possibility of introducing additional fields (in future) to this structure without affecting compatibility. It's on TODO list to come up with better approach to address this. Reserved dump area start => +-------------------------------------+ | CPU state dump data | +-------------------------------------+ | HPTE region data | +-------------------------------------+ | RMR region data | Scratch area start => +-------------------------------------+ | fadump crash info structure { | | magic nummber | +------|---- elfcorehdr_addr | | | } | +----> +-------------------------------------+ | ELF core header | Reserved dump area end => +-------------------------------------+ Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-02-16 01:14:37 +00:00
static int fadump_create_elfcore_headers(char *bufp)
{
struct elfhdr *elf;
struct elf_phdr *phdr;
int i;
fadump_init_elfcore_header(bufp);
elf = (struct elfhdr *)bufp;
bufp += sizeof(struct elfhdr);
/*
* setup ELF PT_NOTE, place holder for cpu notes info. The notes info
* will be populated during second kernel boot after crash. Hence
* this PT_NOTE will always be the first elf note.
*
* NOTE: Any new ELF note addition should be placed after this note.
*/
phdr = (struct elf_phdr *)bufp;
bufp += sizeof(struct elf_phdr);
phdr->p_type = PT_NOTE;
phdr->p_flags = 0;
phdr->p_vaddr = 0;
phdr->p_align = 0;
phdr->p_offset = 0;
phdr->p_paddr = 0;
phdr->p_filesz = 0;
phdr->p_memsz = 0;
(elf->e_phnum)++;
/* setup ELF PT_NOTE for vmcoreinfo */
phdr = (struct elf_phdr *)bufp;
bufp += sizeof(struct elf_phdr);
phdr->p_type = PT_NOTE;
phdr->p_flags = 0;
phdr->p_vaddr = 0;
phdr->p_align = 0;
phdr->p_paddr = fadump_relocate(paddr_vmcoreinfo_note());
phdr->p_offset = phdr->p_paddr;
phdr->p_memsz = phdr->p_filesz = VMCOREINFO_NOTE_SIZE;
/* Increment number of program headers. */
(elf->e_phnum)++;
fadump: Initialize elfcore header and add PT_LOAD program headers. Build the crash memory range list by traversing through system memory during the first kernel before we register for firmware-assisted dump. After the successful dump registration, initialize the elfcore header and populate PT_LOAD program headers with crash memory ranges. The elfcore header is saved in the scratch area within the reserved memory. The scratch area starts at the end of the memory reserved for saving RMR region contents. The scratch area contains fadump crash info structure that contains magic number for fadump validation and physical address where the eflcore header can be found. This structure will also be used to pass some important crash info data to the second kernel which will help second kernel to populate ELF core header with correct data before it gets exported through /proc/vmcore. Since the firmware preserves the entire partition memory at the time of crash the contents of the scratch area will be preserved till second kernel boot. Since the memory dump exported through /proc/vmcore is in ELF format similar to kdump, it will help us to reuse the kdump infrastructure for dump capture and filtering. Unlike phyp dump, userspace tool does not need to refer any sysfs interface while reading /proc/vmcore. NOTE: The current design implementation does not address a possibility of introducing additional fields (in future) to this structure without affecting compatibility. It's on TODO list to come up with better approach to address this. Reserved dump area start => +-------------------------------------+ | CPU state dump data | +-------------------------------------+ | HPTE region data | +-------------------------------------+ | RMR region data | Scratch area start => +-------------------------------------+ | fadump crash info structure { | | magic nummber | +------|---- elfcorehdr_addr | | | } | +----> +-------------------------------------+ | ELF core header | Reserved dump area end => +-------------------------------------+ Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-02-16 01:14:37 +00:00
/* setup PT_LOAD sections. */
for (i = 0; i < crash_mem_ranges; i++) {
unsigned long long mbase, msize;
mbase = crash_memory_ranges[i].base;
msize = crash_memory_ranges[i].size;
if (!msize)
continue;
phdr = (struct elf_phdr *)bufp;
bufp += sizeof(struct elf_phdr);
phdr->p_type = PT_LOAD;
phdr->p_flags = PF_R|PF_W|PF_X;
phdr->p_offset = mbase;
if (mbase == RMA_START) {
/*
* The entire RMA region will be moved by firmware
* to the specified destination_address. Hence set
* the correct offset.
*/
phdr->p_offset = be64_to_cpu(fdm.rmr_region.destination_address);
fadump: Initialize elfcore header and add PT_LOAD program headers. Build the crash memory range list by traversing through system memory during the first kernel before we register for firmware-assisted dump. After the successful dump registration, initialize the elfcore header and populate PT_LOAD program headers with crash memory ranges. The elfcore header is saved in the scratch area within the reserved memory. The scratch area starts at the end of the memory reserved for saving RMR region contents. The scratch area contains fadump crash info structure that contains magic number for fadump validation and physical address where the eflcore header can be found. This structure will also be used to pass some important crash info data to the second kernel which will help second kernel to populate ELF core header with correct data before it gets exported through /proc/vmcore. Since the firmware preserves the entire partition memory at the time of crash the contents of the scratch area will be preserved till second kernel boot. Since the memory dump exported through /proc/vmcore is in ELF format similar to kdump, it will help us to reuse the kdump infrastructure for dump capture and filtering. Unlike phyp dump, userspace tool does not need to refer any sysfs interface while reading /proc/vmcore. NOTE: The current design implementation does not address a possibility of introducing additional fields (in future) to this structure without affecting compatibility. It's on TODO list to come up with better approach to address this. Reserved dump area start => +-------------------------------------+ | CPU state dump data | +-------------------------------------+ | HPTE region data | +-------------------------------------+ | RMR region data | Scratch area start => +-------------------------------------+ | fadump crash info structure { | | magic nummber | +------|---- elfcorehdr_addr | | | } | +----> +-------------------------------------+ | ELF core header | Reserved dump area end => +-------------------------------------+ Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-02-16 01:14:37 +00:00
}
phdr->p_paddr = mbase;
phdr->p_vaddr = (unsigned long)__va(mbase);
phdr->p_filesz = msize;
phdr->p_memsz = msize;
phdr->p_align = 0;
/* Increment number of program headers. */
(elf->e_phnum)++;
}
return 0;
}
static unsigned long init_fadump_header(unsigned long addr)
{
struct fadump_crash_info_header *fdh;
if (!addr)
return 0;
fw_dump.fadumphdr_addr = addr;
fdh = __va(addr);
addr += sizeof(struct fadump_crash_info_header);
memset(fdh, 0, sizeof(struct fadump_crash_info_header));
fdh->magic_number = FADUMP_CRASH_INFO_MAGIC;
fdh->elfcorehdr_addr = addr;
/* We will set the crashing cpu id in crash_fadump() during crash. */
fdh->crashing_cpu = CPU_UNKNOWN;
fadump: Initialize elfcore header and add PT_LOAD program headers. Build the crash memory range list by traversing through system memory during the first kernel before we register for firmware-assisted dump. After the successful dump registration, initialize the elfcore header and populate PT_LOAD program headers with crash memory ranges. The elfcore header is saved in the scratch area within the reserved memory. The scratch area starts at the end of the memory reserved for saving RMR region contents. The scratch area contains fadump crash info structure that contains magic number for fadump validation and physical address where the eflcore header can be found. This structure will also be used to pass some important crash info data to the second kernel which will help second kernel to populate ELF core header with correct data before it gets exported through /proc/vmcore. Since the firmware preserves the entire partition memory at the time of crash the contents of the scratch area will be preserved till second kernel boot. Since the memory dump exported through /proc/vmcore is in ELF format similar to kdump, it will help us to reuse the kdump infrastructure for dump capture and filtering. Unlike phyp dump, userspace tool does not need to refer any sysfs interface while reading /proc/vmcore. NOTE: The current design implementation does not address a possibility of introducing additional fields (in future) to this structure without affecting compatibility. It's on TODO list to come up with better approach to address this. Reserved dump area start => +-------------------------------------+ | CPU state dump data | +-------------------------------------+ | HPTE region data | +-------------------------------------+ | RMR region data | Scratch area start => +-------------------------------------+ | fadump crash info structure { | | magic nummber | +------|---- elfcorehdr_addr | | | } | +----> +-------------------------------------+ | ELF core header | Reserved dump area end => +-------------------------------------+ Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-02-16 01:14:37 +00:00
return addr;
}
static int register_fadump(void)
{
fadump: Initialize elfcore header and add PT_LOAD program headers. Build the crash memory range list by traversing through system memory during the first kernel before we register for firmware-assisted dump. After the successful dump registration, initialize the elfcore header and populate PT_LOAD program headers with crash memory ranges. The elfcore header is saved in the scratch area within the reserved memory. The scratch area starts at the end of the memory reserved for saving RMR region contents. The scratch area contains fadump crash info structure that contains magic number for fadump validation and physical address where the eflcore header can be found. This structure will also be used to pass some important crash info data to the second kernel which will help second kernel to populate ELF core header with correct data before it gets exported through /proc/vmcore. Since the firmware preserves the entire partition memory at the time of crash the contents of the scratch area will be preserved till second kernel boot. Since the memory dump exported through /proc/vmcore is in ELF format similar to kdump, it will help us to reuse the kdump infrastructure for dump capture and filtering. Unlike phyp dump, userspace tool does not need to refer any sysfs interface while reading /proc/vmcore. NOTE: The current design implementation does not address a possibility of introducing additional fields (in future) to this structure without affecting compatibility. It's on TODO list to come up with better approach to address this. Reserved dump area start => +-------------------------------------+ | CPU state dump data | +-------------------------------------+ | HPTE region data | +-------------------------------------+ | RMR region data | Scratch area start => +-------------------------------------+ | fadump crash info structure { | | magic nummber | +------|---- elfcorehdr_addr | | | } | +----> +-------------------------------------+ | ELF core header | Reserved dump area end => +-------------------------------------+ Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-02-16 01:14:37 +00:00
unsigned long addr;
void *vaddr;
/*
* If no memory is reserved then we can not register for firmware-
* assisted dump.
*/
if (!fw_dump.reserve_dump_area_size)
return -ENODEV;
fadump: Initialize elfcore header and add PT_LOAD program headers. Build the crash memory range list by traversing through system memory during the first kernel before we register for firmware-assisted dump. After the successful dump registration, initialize the elfcore header and populate PT_LOAD program headers with crash memory ranges. The elfcore header is saved in the scratch area within the reserved memory. The scratch area starts at the end of the memory reserved for saving RMR region contents. The scratch area contains fadump crash info structure that contains magic number for fadump validation and physical address where the eflcore header can be found. This structure will also be used to pass some important crash info data to the second kernel which will help second kernel to populate ELF core header with correct data before it gets exported through /proc/vmcore. Since the firmware preserves the entire partition memory at the time of crash the contents of the scratch area will be preserved till second kernel boot. Since the memory dump exported through /proc/vmcore is in ELF format similar to kdump, it will help us to reuse the kdump infrastructure for dump capture and filtering. Unlike phyp dump, userspace tool does not need to refer any sysfs interface while reading /proc/vmcore. NOTE: The current design implementation does not address a possibility of introducing additional fields (in future) to this structure without affecting compatibility. It's on TODO list to come up with better approach to address this. Reserved dump area start => +-------------------------------------+ | CPU state dump data | +-------------------------------------+ | HPTE region data | +-------------------------------------+ | RMR region data | Scratch area start => +-------------------------------------+ | fadump crash info structure { | | magic nummber | +------|---- elfcorehdr_addr | | | } | +----> +-------------------------------------+ | ELF core header | Reserved dump area end => +-------------------------------------+ Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-02-16 01:14:37 +00:00
fadump_setup_crash_memory_ranges();
addr = be64_to_cpu(fdm.rmr_region.destination_address) + be64_to_cpu(fdm.rmr_region.source_len);
fadump: Initialize elfcore header and add PT_LOAD program headers. Build the crash memory range list by traversing through system memory during the first kernel before we register for firmware-assisted dump. After the successful dump registration, initialize the elfcore header and populate PT_LOAD program headers with crash memory ranges. The elfcore header is saved in the scratch area within the reserved memory. The scratch area starts at the end of the memory reserved for saving RMR region contents. The scratch area contains fadump crash info structure that contains magic number for fadump validation and physical address where the eflcore header can be found. This structure will also be used to pass some important crash info data to the second kernel which will help second kernel to populate ELF core header with correct data before it gets exported through /proc/vmcore. Since the firmware preserves the entire partition memory at the time of crash the contents of the scratch area will be preserved till second kernel boot. Since the memory dump exported through /proc/vmcore is in ELF format similar to kdump, it will help us to reuse the kdump infrastructure for dump capture and filtering. Unlike phyp dump, userspace tool does not need to refer any sysfs interface while reading /proc/vmcore. NOTE: The current design implementation does not address a possibility of introducing additional fields (in future) to this structure without affecting compatibility. It's on TODO list to come up with better approach to address this. Reserved dump area start => +-------------------------------------+ | CPU state dump data | +-------------------------------------+ | HPTE region data | +-------------------------------------+ | RMR region data | Scratch area start => +-------------------------------------+ | fadump crash info structure { | | magic nummber | +------|---- elfcorehdr_addr | | | } | +----> +-------------------------------------+ | ELF core header | Reserved dump area end => +-------------------------------------+ Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-02-16 01:14:37 +00:00
/* Initialize fadump crash info header. */
addr = init_fadump_header(addr);
vaddr = __va(addr);
pr_debug("Creating ELF core headers at %#016lx\n", addr);
fadump_create_elfcore_headers(vaddr);
/* register the future kernel dump with firmware. */
return register_fw_dump(&fdm);
}
static int fadump_unregister_dump(struct fadump_mem_struct *fdm)
{
int rc = 0;
unsigned int wait_time;
pr_debug("Un-register firmware-assisted dump\n");
/* TODO: Add upper time limit for the delay */
do {
rc = rtas_call(fw_dump.ibm_configure_kernel_dump, 3, 1, NULL,
FADUMP_UNREGISTER, fdm,
sizeof(struct fadump_mem_struct));
wait_time = rtas_busy_delay_time(rc);
if (wait_time)
mdelay(wait_time);
} while (wait_time);
if (rc) {
printk(KERN_ERR "Failed to un-register firmware-assisted dump."
" unexpected error(%d).\n", rc);
return rc;
}
fw_dump.dump_registered = 0;
return 0;
}
static int fadump_invalidate_dump(struct fadump_mem_struct *fdm)
{
int rc = 0;
unsigned int wait_time;
pr_debug("Invalidating firmware-assisted dump registration\n");
/* TODO: Add upper time limit for the delay */
do {
rc = rtas_call(fw_dump.ibm_configure_kernel_dump, 3, 1, NULL,
FADUMP_INVALIDATE, fdm,
sizeof(struct fadump_mem_struct));
wait_time = rtas_busy_delay_time(rc);
if (wait_time)
mdelay(wait_time);
} while (wait_time);
if (rc) {
pr_err("Failed to invalidate firmware-assisted dump registration. Unexpected error (%d).\n", rc);
return rc;
}
fw_dump.dump_active = 0;
fdm_active = NULL;
return 0;
}
void fadump_cleanup(void)
{
/* Invalidate the registration only if dump is active. */
if (fw_dump.dump_active) {
init_fadump_mem_struct(&fdm,
be64_to_cpu(fdm_active->cpu_state_data.destination_address));
fadump_invalidate_dump(&fdm);
}
}
static void fadump_free_reserved_memory(unsigned long start_pfn,
unsigned long end_pfn)
{
unsigned long pfn;
unsigned long time_limit = jiffies + HZ;
pr_info("freeing reserved memory (0x%llx - 0x%llx)\n",
PFN_PHYS(start_pfn), PFN_PHYS(end_pfn));
for (pfn = start_pfn; pfn < end_pfn; pfn++) {
free_reserved_page(pfn_to_page(pfn));
if (time_after(jiffies, time_limit)) {
cond_resched();
time_limit = jiffies + HZ;
}
}
}
/*
* Skip memory holes and free memory that was actually reserved.
*/
static void fadump_release_reserved_area(unsigned long start, unsigned long end)
{
struct memblock_region *reg;
unsigned long tstart, tend;
unsigned long start_pfn = PHYS_PFN(start);
unsigned long end_pfn = PHYS_PFN(end);
for_each_memblock(memory, reg) {
tstart = max(start_pfn, memblock_region_memory_base_pfn(reg));
tend = min(end_pfn, memblock_region_memory_end_pfn(reg));
if (tstart < tend) {
fadump_free_reserved_memory(tstart, tend);
if (tend == end_pfn)
break;
start_pfn = tend + 1;
}
}
}
/*
* Release the memory that was reserved in early boot to preserve the memory
* contents. The released memory will be available for general use.
*/
static void fadump_release_memory(unsigned long begin, unsigned long end)
{
unsigned long ra_start, ra_end;
ra_start = fw_dump.reserve_dump_area_start;
ra_end = ra_start + fw_dump.reserve_dump_area_size;
/*
* exclude the dump reserve area. Will reuse it for next
* fadump registration.
*/
if (begin < ra_end && end > ra_start) {
if (begin < ra_start)
fadump_release_reserved_area(begin, ra_start);
if (end > ra_end)
fadump_release_reserved_area(ra_end, end);
} else
fadump_release_reserved_area(begin, end);
}
static void fadump_invalidate_release_mem(void)
{
unsigned long reserved_area_start, reserved_area_end;
unsigned long destination_address;
mutex_lock(&fadump_mutex);
if (!fw_dump.dump_active) {
mutex_unlock(&fadump_mutex);
return;
}
destination_address = be64_to_cpu(fdm_active->cpu_state_data.destination_address);
fadump_cleanup();
mutex_unlock(&fadump_mutex);
/*
* Save the current reserved memory bounds we will require them
* later for releasing the memory for general use.
*/
reserved_area_start = fw_dump.reserve_dump_area_start;
reserved_area_end = reserved_area_start +
fw_dump.reserve_dump_area_size;
/*
* Setup reserve_dump_area_start and its size so that we can
* reuse this reserved memory for Re-registration.
*/
fw_dump.reserve_dump_area_start = destination_address;
fw_dump.reserve_dump_area_size = get_fadump_area_size();
fadump_release_memory(reserved_area_start, reserved_area_end);
if (fw_dump.cpu_notes_buf) {
fadump_cpu_notes_buf_free(
(unsigned long)__va(fw_dump.cpu_notes_buf),
fw_dump.cpu_notes_buf_size);
fw_dump.cpu_notes_buf = 0;
fw_dump.cpu_notes_buf_size = 0;
}
/* Initialize the kernel dump memory structure for FAD registration. */
init_fadump_mem_struct(&fdm, fw_dump.reserve_dump_area_start);
}
static ssize_t fadump_release_memory_store(struct kobject *kobj,
struct kobj_attribute *attr,
const char *buf, size_t count)
{
int input = -1;
if (!fw_dump.dump_active)
return -EPERM;
if (kstrtoint(buf, 0, &input))
return -EINVAL;
if (input == 1) {
/*
* Take away the '/proc/vmcore'. We are releasing the dump
* memory, hence it will not be valid anymore.
*/
#ifdef CONFIG_PROC_VMCORE
vmcore_cleanup();
#endif
fadump_invalidate_release_mem();
} else
return -EINVAL;
return count;
}
static ssize_t fadump_enabled_show(struct kobject *kobj,
struct kobj_attribute *attr,
char *buf)
{
return sprintf(buf, "%d\n", fw_dump.fadump_enabled);
}
static ssize_t fadump_register_show(struct kobject *kobj,
struct kobj_attribute *attr,
char *buf)
{
return sprintf(buf, "%d\n", fw_dump.dump_registered);
}
static ssize_t fadump_register_store(struct kobject *kobj,
struct kobj_attribute *attr,
const char *buf, size_t count)
{
int ret = 0;
int input = -1;
if (!fw_dump.fadump_enabled || fdm_active)
return -EPERM;
if (kstrtoint(buf, 0, &input))
return -EINVAL;
mutex_lock(&fadump_mutex);
switch (input) {
case 0:
if (fw_dump.dump_registered == 0) {
goto unlock_out;
}
/* Un-register Firmware-assisted dump */
fadump_unregister_dump(&fdm);
break;
case 1:
if (fw_dump.dump_registered == 1) {
ret = -EEXIST;
goto unlock_out;
}
/* Register Firmware-assisted dump */
ret = register_fadump();
break;
default:
ret = -EINVAL;
break;
}
unlock_out:
mutex_unlock(&fadump_mutex);
return ret < 0 ? ret : count;
}
static int fadump_region_show(struct seq_file *m, void *private)
{
const struct fadump_mem_struct *fdm_ptr;
if (!fw_dump.fadump_enabled)
return 0;
mutex_lock(&fadump_mutex);
if (fdm_active)
fdm_ptr = fdm_active;
else {
mutex_unlock(&fadump_mutex);
fdm_ptr = &fdm;
}
seq_printf(m,
"CPU : [%#016llx-%#016llx] %#llx bytes, "
"Dumped: %#llx\n",
be64_to_cpu(fdm_ptr->cpu_state_data.destination_address),
be64_to_cpu(fdm_ptr->cpu_state_data.destination_address) +
be64_to_cpu(fdm_ptr->cpu_state_data.source_len) - 1,
be64_to_cpu(fdm_ptr->cpu_state_data.source_len),
be64_to_cpu(fdm_ptr->cpu_state_data.bytes_dumped));
seq_printf(m,
"HPTE: [%#016llx-%#016llx] %#llx bytes, "
"Dumped: %#llx\n",
be64_to_cpu(fdm_ptr->hpte_region.destination_address),
be64_to_cpu(fdm_ptr->hpte_region.destination_address) +
be64_to_cpu(fdm_ptr->hpte_region.source_len) - 1,
be64_to_cpu(fdm_ptr->hpte_region.source_len),
be64_to_cpu(fdm_ptr->hpte_region.bytes_dumped));
seq_printf(m,
"DUMP: [%#016llx-%#016llx] %#llx bytes, "
"Dumped: %#llx\n",
be64_to_cpu(fdm_ptr->rmr_region.destination_address),
be64_to_cpu(fdm_ptr->rmr_region.destination_address) +
be64_to_cpu(fdm_ptr->rmr_region.source_len) - 1,
be64_to_cpu(fdm_ptr->rmr_region.source_len),
be64_to_cpu(fdm_ptr->rmr_region.bytes_dumped));
if (!fdm_active ||
(fw_dump.reserve_dump_area_start ==
be64_to_cpu(fdm_ptr->cpu_state_data.destination_address)))
goto out;
/* Dump is active. Show reserved memory region. */
seq_printf(m,
" : [%#016llx-%#016llx] %#llx bytes, "
"Dumped: %#llx\n",
(unsigned long long)fw_dump.reserve_dump_area_start,
be64_to_cpu(fdm_ptr->cpu_state_data.destination_address) - 1,
be64_to_cpu(fdm_ptr->cpu_state_data.destination_address) -
fw_dump.reserve_dump_area_start,
be64_to_cpu(fdm_ptr->cpu_state_data.destination_address) -
fw_dump.reserve_dump_area_start);
out:
if (fdm_active)
mutex_unlock(&fadump_mutex);
return 0;
}
static struct kobj_attribute fadump_release_attr = __ATTR(fadump_release_mem,
0200, NULL,
fadump_release_memory_store);
static struct kobj_attribute fadump_attr = __ATTR(fadump_enabled,
0444, fadump_enabled_show,
NULL);
static struct kobj_attribute fadump_register_attr = __ATTR(fadump_registered,
0644, fadump_register_show,
fadump_register_store);
static int fadump_region_open(struct inode *inode, struct file *file)
{
return single_open(file, fadump_region_show, inode->i_private);
}
static const struct file_operations fadump_region_fops = {
.open = fadump_region_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static void fadump_init_files(void)
{
struct dentry *debugfs_file;
int rc = 0;
rc = sysfs_create_file(kernel_kobj, &fadump_attr.attr);
if (rc)
printk(KERN_ERR "fadump: unable to create sysfs file"
" fadump_enabled (%d)\n", rc);
rc = sysfs_create_file(kernel_kobj, &fadump_register_attr.attr);
if (rc)
printk(KERN_ERR "fadump: unable to create sysfs file"
" fadump_registered (%d)\n", rc);
debugfs_file = debugfs_create_file("fadump_region", 0444,
powerpc_debugfs_root, NULL,
&fadump_region_fops);
if (!debugfs_file)
printk(KERN_ERR "fadump: unable to create debugfs file"
" fadump_region\n");
if (fw_dump.dump_active) {
rc = sysfs_create_file(kernel_kobj, &fadump_release_attr.attr);
if (rc)
printk(KERN_ERR "fadump: unable to create sysfs file"
" fadump_release_mem (%d)\n", rc);
}
return;
}
/*
* Prepare for firmware-assisted dump.
*/
int __init setup_fadump(void)
{
if (!fw_dump.fadump_enabled)
return 0;
if (!fw_dump.fadump_supported) {
printk(KERN_ERR "Firmware-assisted dump is not supported on"
" this hardware\n");
return 0;
}
fadump_show_config();
fadump: Initialize elfcore header and add PT_LOAD program headers. Build the crash memory range list by traversing through system memory during the first kernel before we register for firmware-assisted dump. After the successful dump registration, initialize the elfcore header and populate PT_LOAD program headers with crash memory ranges. The elfcore header is saved in the scratch area within the reserved memory. The scratch area starts at the end of the memory reserved for saving RMR region contents. The scratch area contains fadump crash info structure that contains magic number for fadump validation and physical address where the eflcore header can be found. This structure will also be used to pass some important crash info data to the second kernel which will help second kernel to populate ELF core header with correct data before it gets exported through /proc/vmcore. Since the firmware preserves the entire partition memory at the time of crash the contents of the scratch area will be preserved till second kernel boot. Since the memory dump exported through /proc/vmcore is in ELF format similar to kdump, it will help us to reuse the kdump infrastructure for dump capture and filtering. Unlike phyp dump, userspace tool does not need to refer any sysfs interface while reading /proc/vmcore. NOTE: The current design implementation does not address a possibility of introducing additional fields (in future) to this structure without affecting compatibility. It's on TODO list to come up with better approach to address this. Reserved dump area start => +-------------------------------------+ | CPU state dump data | +-------------------------------------+ | HPTE region data | +-------------------------------------+ | RMR region data | Scratch area start => +-------------------------------------+ | fadump crash info structure { | | magic nummber | +------|---- elfcorehdr_addr | | | } | +----> +-------------------------------------+ | ELF core header | Reserved dump area end => +-------------------------------------+ Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-02-16 01:14:37 +00:00
/*
* If dump data is available then see if it is valid and prepare for
* saving it to the disk.
*/
if (fw_dump.dump_active) {
/*
* if dump process fails then invalidate the registration
* and release memory before proceeding for re-registration.
*/
if (process_fadump(fdm_active) < 0)
fadump_invalidate_release_mem();
}
/* Initialize the kernel dump memory structure for FAD registration. */
fadump: Initialize elfcore header and add PT_LOAD program headers. Build the crash memory range list by traversing through system memory during the first kernel before we register for firmware-assisted dump. After the successful dump registration, initialize the elfcore header and populate PT_LOAD program headers with crash memory ranges. The elfcore header is saved in the scratch area within the reserved memory. The scratch area starts at the end of the memory reserved for saving RMR region contents. The scratch area contains fadump crash info structure that contains magic number for fadump validation and physical address where the eflcore header can be found. This structure will also be used to pass some important crash info data to the second kernel which will help second kernel to populate ELF core header with correct data before it gets exported through /proc/vmcore. Since the firmware preserves the entire partition memory at the time of crash the contents of the scratch area will be preserved till second kernel boot. Since the memory dump exported through /proc/vmcore is in ELF format similar to kdump, it will help us to reuse the kdump infrastructure for dump capture and filtering. Unlike phyp dump, userspace tool does not need to refer any sysfs interface while reading /proc/vmcore. NOTE: The current design implementation does not address a possibility of introducing additional fields (in future) to this structure without affecting compatibility. It's on TODO list to come up with better approach to address this. Reserved dump area start => +-------------------------------------+ | CPU state dump data | +-------------------------------------+ | HPTE region data | +-------------------------------------+ | RMR region data | Scratch area start => +-------------------------------------+ | fadump crash info structure { | | magic nummber | +------|---- elfcorehdr_addr | | | } | +----> +-------------------------------------+ | ELF core header | Reserved dump area end => +-------------------------------------+ Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-02-16 01:14:37 +00:00
else if (fw_dump.reserve_dump_area_size)
init_fadump_mem_struct(&fdm, fw_dump.reserve_dump_area_start);
fadump_init_files();
return 1;
}
subsys_initcall(setup_fadump);