Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-22 12:11:40 +00:00
Code Issues Packages Projects Releases Wiki Activity
1001354ca3
linux/drivers/mfd/Makefile

214 lines
7.9 KiB
Makefile
Raw Normal View History

[MFD] Add multimedia communication port core support Add support for the core of the multimedia communication port framework. This is a port used to communicate with devices with two DMA paths and a control path. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-08-18 09:06:59 +00:00
#
# Makefile for multifunction miscellaneous devices
#
mfd: Rename 88pm8607 to 88pm860x in mfd Rename 88PM8607 to 88PM860X in both Makefile and Kconfig under mfd directory. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-01-06 22:07:13 +00:00
88pm860x-objs := 88pm860x-core.o 88pm860x-i2c.o
obj-$(CONFIG_MFD_88PM860X) += 88pm860x.o
mfd: Support 88pm80x in 80x driver 88PM800 and 88PM805 are two discrete chips used for power management. Hardware designer can use them together or only one of them according to requirement. 88pm80x.c provides common i2c driver handling for both 800 and 805, such as i2c_driver init, regmap init, read/write api etc. 88pm800.c handles specifically for 800, such as chip init, irq init/handle, mfd device register, including rtc, onkey, regulator( to be add later) etc. besides that, 800 has three i2c device, one regular i2c client, two other i2c dummy for gpadc and power purpose. 88pm805.c handles specifically for 805, such as chip init, irq init/handle, mfd device register, including codec, headset/mic detect etc. the i2c operation of both 800 and 805 are via regmap, and 88pm80x-i2c exported a group of r/w bulk r/w and bits set API for facility. Signed-off-by: Qiao Zhou <zhouqiao@marvell.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09 06:37:32 +00:00
obj-$(CONFIG_MFD_88PM800) += 88pm800.o 88pm80x.o
obj-$(CONFIG_MFD_88PM805) += 88pm805.o 88pm80x.o
mfd: act8945a: Add Active-semi ACT8945A PMIC MFD driver This patch adds support for the Active-semi ACT8945A PMIC. It is a Multi Function Device with the following subdevices: - Regulator - Charger It is interfaced to the host controller using I2C interface, ACT8945A is a child device of the I2C. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-02-05 03:36:29 +00:00
obj-$(CONFIG_MFD_ACT8945A) += act8945a.o
[PATCH] mfd: SM501 core driver This driver provides the core functionality of the SM501, which is a multi-function chip including two framebuffers, video acceleration, USB, and many other peripheral blocks. The driver exports a number of entries for the peripheral drivers to use. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20 21:58:01 +00:00
obj-$(CONFIG_MFD_SM501) += sm501.o
mfd: Fix asic3 build asic3 also needs tmio_core or otherwise will fail to build. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-01-23 21:20:20 +00:00
obj-$(CONFIG_MFD_ASIC3) += asic3.o tmio_core.o
mfd: Add bcm590xx pmu driver Add a driver for the BCM590xx PMU multi-function devices. The driver initially supports regmap initialization and instantiation of the voltage regulator device function of the PMU. Signed-off-by: Matt Porter <mporter@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Markus Mayer <markus.mayer@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-11 23:33:54 +00:00
obj-$(CONFIG_MFD_BCM590XX) += bcm590xx.o
mfd: Add ChromeOS EC implementation This is the base EC implementation, which provides a high level interface to the EC for use by the rest of the kernel. The actual communcations is dealt with by a separate protocol driver which registers itself with this interface. Interrupts are passed on through a notifier. A simple message structure is used to pass messages to the protocol driver. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Che-Liang Chiou <clchiou@chromium.org> Signed-off-by: Jonathan Kliegman <kliegs@chromium.org> Signed-off-by: Luigi Semenzato <semenzato@chromium.org> Signed-off-by: Olof Johansson <olofj@chromium.org> Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-25 22:08:37 +00:00
obj-$(CONFIG_MFD_CROS_EC) += cros_ec.o
mfd: Add ChromeOS EC I2C driver This uses an I2C bus to talk to the ChromeOS EC. The protocol is defined by the EC and is fairly simple, with a length byte, checksum, command byte and version byte (to permit easy creation of new commands). Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Che-Liang Chiou <clchiou@chromium.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-25 22:08:38 +00:00
obj-$(CONFIG_MFD_CROS_EC_I2C) += cros_ec_i2c.o
mfd: Add ChromeOS EC SPI driver This uses a SPI bus to talk to the ChromeOS EC. The protocol is defined by the EC and is fairly simple, with a length byte, checksum, command byte and version byte (to permit easy creation of new commands). Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-25 22:08:39 +00:00
obj-$(CONFIG_MFD_CROS_EC_SPI) += cros_ec_spi.o
mfd: Add Samsung Exynos Low Power Audio Subsystem driver This patch adds common driver for the Top block of the Samsung Exynos SoC Low Power Audio Subsystem. This is a minimal driver which prepares resources for IP blocks like I2S, audio DMA and UART and exposes a regmap for the Top block registers. Also system power ops are added to ensure the Audio Subsystem is operational after system suspend/resume cycle. Signed-off-by: Inha Song <ideal.song@samsung.com> Signed-off-by: Beomho Seo <beomho.seo@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-08-10 14:48:20 +00:00
obj-$(CONFIG_MFD_EXYNOS_LPASS) += exynos-lpass.o
[PATCH] mfd: SM501 core driver This driver provides the core functionality of the SM501, which is a multi-function chip including two framebuffers, video acceleration, USB, and many other peripheral blocks. The driver exports a number of entries for the peripheral drivers to use. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20 21:58:01 +00:00
mfd: rtsx: Remove LCTLR defination To enable/disable ASPM we should find LINK CONTROL register in PCI config space. All old chip use 0x80 address, but new chip may use another address, so we using pci_find_capability() to get LINK CONTROL address. rtsx_gops.c was removed, we consider to put some common operations to this file, but the actual thing is, only a group of chips are in common ops1, and another group of chips in common ops2, it is hard to decide put which ops into generic ops file. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-25 05:50:13 +00:00
rtsx_pci-objs := rtsx_pcr.o rts5209.o rts5229.o rtl8411.o rts5227.o rts5249.o
drivers/mfd: Add realtek pcie card reader driver Realtek PCI-E card reader driver adapts requests from upper-level sdmmc/memstick layer to the real physical card reader. Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-09 12:53:33 +00:00
obj-$(CONFIG_MFD_RTSX_PCI) += rtsx_pci.o
mfd: Add realtek USB card reader driver Realtek USB card reader provides a channel to transfer command or data to flash memory cards. This driver exports host instances for mmc and memstick subsystems and handles basic works. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Roger Tseng <rogerable@realtek.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-02-12 10:00:36 +00:00
obj-$(CONFIG_MFD_RTSX_USB) += rtsx_usb.o
drivers/mfd: Add realtek pcie card reader driver Realtek PCI-E card reader driver adapts requests from upper-level sdmmc/memstick layer to the real physical card reader. Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-09 12:53:33 +00:00
[ARM] 4964/1: htc-pasic3: MFD driver for PASIC3 LED control + DS1WM chip This driver will provide registers, clocks and GPIOs of the HTC PASIC3 (AIC3) and PASIC2 (AIC2) chips to the ds1wm and leds-pasic3 drivers. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-12 12:25:41 +00:00
obj-$(CONFIG_HTC_PASIC3) += htc-pasic3.o
mfd: Add HTCPLD driver This change introduces a driver for the HTC PLD chip found on some smartphones, such as the HTC Wizard and HTC Herald. It works through the I2C bus and acts as a GPIO extender. Specifically: * it can have several sub-devices, each with its own I2C address * Each sub-device provides 8 output and 8 input pins * The chip attaches to one GPIO to signal when any of the input GPIOs change -- at which point all chips must be scanned for changes This driver implements the GPIOs throught the kernel's GPIO and IRQ framework. This allows any GPIO-servicing drivers to operate on htcpld pins, such as the gpio-keys and gpio-leds drivers. Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-01-19 10:22:45 +00:00
obj-$(CONFIG_HTC_I2CPLD) += htc-i2cpld.o
[ARM] 4947/1: htc-egpio, a driver for GPIO/IRQ expanders with fixed input/output pins implemented in CPLD chips on several HTC devices. The original driver was written by Kevin O'Connor, I have adapted it to use gpiolib and made the bus/register widths configurable. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-09 18:20:34 +00:00
mfd: lp873x: Add lp873x PMIC support The LP873X chip is a power management IC for Portable Navigation Systems and Tablet Computing devices. It contains the following components: - Regulators. - Configurable General Purpose Output Signals (GPO). PMIC interacts with the main processor through i2c. PMIC has couple of LDOs (Linear Regulators), couple of BUCKs (Step-Down DC-DC Converter Cores) and GPOs (General Purpose Output Signals). Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-08-31 08:58:10 +00:00
obj-$(CONFIG_MFD_TI_LP873X) += lp873x.o
MFD: DaVinci Voice Codec This is the MFD driver for the DaVinci Voice codec, it has two clients: * Voice codec interface * Voice codec CQ93VC Signed-off-by: Miguel Aguilar <miguel.aguilar@ridgerun.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-11 15:32:21 +00:00
obj-$(CONFIG_MFD_DAVINCI_VOICECODEC) += davinci_voicecodec.o
mfd: dm355evm msp430 driver Basic MFD framework for the MSP430 microcontroller firmware used on the dm355evm board: - Provides an interface for other drivers: register read/write utilities, and register declarations. - Directly exports: * Many signals through the GPIO framework + LEDs + SW6 through gpio sysfs + NTSC/nPAL jumper through gpio sysfs + ... more could be added later, e.g. MMC signals * Child devices: + LEDs, via leds-gpio child (and default triggers) + RTC, via rtc-dm355evm child device + Buttons and IR control, via dm355evm_keys - Supports power-off system call. Use the reset button to power the board back up; the power supply LED will be on, but the MSP430 waits to re-activate the regulators. - On probe() this: * Announces firmware revision * Turns off the banked LEDs * Exports the resources noted above * Hooks the power-off support * Muxes tvp5146 -or- imager for video input Unless the new tvp514x driver (tracked for mainline) is configured, this assumes that some custom imager driver handles video-in. This completely ignores the registers reporting the output voltages on the various power supplies. Someone could add a hwmon interface if that seems useful. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-12-22 11:05:27 +00:00
obj-$(CONFIG_MFD_DM355EVM_MSP) += dm355evm_msp.o
mfd: ti_tscadc: Add support for TI's TSC/ADC MFDevice Add the mfd core driver which supports touchscreen and ADC. With this patch we are only adding infrastructure to support the MFD clients. Signed-off-by: Patil, Rachna <rachna@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-10-16 07:25:43 +00:00
obj-$(CONFIG_MFD_TI_AM335X_TSCADC) += ti_am335x_tscadc.o
mfd: dm355evm msp430 driver Basic MFD framework for the MSP430 microcontroller firmware used on the dm355evm board: - Provides an interface for other drivers: register read/write utilities, and register declarations. - Directly exports: * Many signals through the GPIO framework + LEDs + SW6 through gpio sysfs + NTSC/nPAL jumper through gpio sysfs + ... more could be added later, e.g. MMC signals * Child devices: + LEDs, via leds-gpio child (and default triggers) + RTC, via rtc-dm355evm child device + Buttons and IR control, via dm355evm_keys - Supports power-off system call. Use the reset button to power the board back up; the power supply LED will be on, but the MSP430 waits to re-activate the regulators. - On probe() this: * Announces firmware revision * Turns off the banked LEDs * Exports the resources noted above * Hooks the power-off support * Muxes tvp5146 -or- imager for video input Unless the new tvp514x driver (tracked for mainline) is configured, this assumes that some custom imager driver handles video-in. This completely ignores the registers reporting the output voltages on the various power supplies. Someone could add a hwmon interface if that seems useful. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-12-22 11:05:27 +00:00
mfd: Add driver for STA2X11 MFD block This also introduces <asm/sta2x11.h> to export a function that is in the base sta2x11 support patches. The header will increase with other prototypes and constants over time. Signed-off-by: Alessandro Rubini <rubini@gnudd.com> Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@st.com> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-04-12 08:48:44 +00:00
obj-$(CONFIG_MFD_STA2X11) += sta2x11-mfd.o
mfd: Add STMPE I/O Expander support Add support for the STMPE family of I/O Expanders from STMicroelectronics. These devices include upto 24 gpios and a varying selection of blocks, including PWM, keypad, and touchscreen controllers. This patch adds the MFD core. [l.fu@pengutronix.de: fix stmpe811 enable hook] [l.fu@pengutronix.de: add touchscreen platform data] Acked-by: Luotao Fu <l.fu@pengutronix.de> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-07-02 11:22:08 +00:00
obj-$(CONFIG_MFD_STMPE) += stmpe.o
mfd: Separate out STMPE controller and interface specific code Few STMPE controller can have register interface over SPI or I2C. Current implementation only supports I2C and all code is present in a single file stmpe.c. It would be better to separate out I2C interface specific code from controller specific code. Later SPI specific code can be added in a separate file. This patch separates out I2C and controller specific code into separate files, making stmpe.c independent of I2C. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-11-17 05:32:20 +00:00
obj-$(CONFIG_STMPE_I2C) += stmpe-i2c.o
mfd: Add support for STMPE SPI interface Few STMPE controller can have register interface over SPI or I2C. Current implementation only supports I2C. This patch adds support for SPI interface for accessing STMPE's address space. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-11-17 05:32:21 +00:00
obj-$(CONFIG_STMPE_SPI) += stmpe-spi.o
mfd: Add support for sun6i PRCM (Power/Reset/Clock Management) unit The PRCM (Power/Reset/Clock Management) block exposes several subdevices in different subsystems (clk, reset ...) Add basic support for the PRCM unit with clk (AR100, AHB0, and APB0 clks) and reset controller subdevices. Other subdevices might be added later (if needed). Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-05-09 11:11:47 +00:00
obj-$(CONFIG_MFD_SUN6I_PRCM) += sun6i-prcm.o
mfd/tc35892: rename tc35892 core driver to tc3589x Rename the tc35892 core/gpio drivers to tc3589x to include new variants in the same mfd core Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-13 04:03:13 +00:00
obj-$(CONFIG_MFD_TC3589X) += tc3589x.o
mfd: tmio_mmc hardware abstraction for CNF area This patch abstracts out the CNF area code from tmio_mmc which is not present in all hardware that can use this driver. This is required so that we can support non-toshiba based hardware. ASIC3 support by Philipp Zabel Signed-off-by: Ian Molton <ian@mnementh.co.uk> Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-01-06 12:51:48 +00:00
obj-$(CONFIG_MFD_T7L66XB) += t7l66xb.o tmio_core.o
obj-$(CONFIG_MFD_TC6387XB) += tc6387xb.o tmio_core.o
obj-$(CONFIG_MFD_TC6393XB) += tc6393xb.o tmio_core.o
[ARM] 5096/2: Support Toshiba TC6393XB Mobile I/O Controller. Add support for Toshiba TC6393XB companion chip. Currently only GPIO and part of IRQ features of the device are supported. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-22 11:01:58 +00:00
mfd: wm5102: Build system hookup Several forthcoming Wolfson devices are based on a common platform known as Arizona allowing a great deal of reuse of driver code. This patch adds the build system hookup for the core driver and the WM5102. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-19 15:37:06 +00:00
obj-$(CONFIG_MFD_ARIZONA) += arizona-core.o
obj-$(CONFIG_MFD_ARIZONA) += arizona-irq.o
obj-$(CONFIG_MFD_ARIZONA_I2C) += arizona-i2c.o
obj-$(CONFIG_MFD_ARIZONA_SPI) += arizona-spi.o
mfd: arizona: Fix incorrect Makefile conditionals The use of ifneq against 'n' to conditionally compile codec-specific parts is wrong and was resulting in all the codec tables being built even for deselected codecs. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-05-13 15:52:26 +00:00
ifeq ($(CONFIG_MFD_WM5102),y)
mfd: wm5102: Build system hookup Several forthcoming Wolfson devices are based on a common platform known as Arizona allowing a great deal of reuse of driver code. This patch adds the build system hookup for the core driver and the WM5102. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-19 15:37:06 +00:00
obj-$(CONFIG_MFD_ARIZONA) += wm5102-tables.o
endif
mfd: arizona: Fix incorrect Makefile conditionals The use of ifneq against 'n' to conditionally compile codec-specific parts is wrong and was resulting in all the codec tables being built even for deselected codecs. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-05-13 15:52:26 +00:00
ifeq ($(CONFIG_MFD_WM5110),y)
mfd: Initial support for the WM5110 The WM5110 is a highly-integrated low-power audio system for smartphones, tablets and other portable audio devices. It combines an advanced DSP feature set with a flexible, high-performance audio hub CODEC. The support is based on the Arizona core driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-10 11:37:58 +00:00
obj-$(CONFIG_MFD_ARIZONA) += wm5110-tables.o
endif
mfd: arizona: Fix incorrect Makefile conditionals The use of ifneq against 'n' to conditionally compile codec-specific parts is wrong and was resulting in all the codec tables being built even for deselected codecs. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-05-13 15:52:26 +00:00
ifeq ($(CONFIG_MFD_WM8997),y)
mfd: arizona: Integrate wm8997 into Arizona mfd The wm8997 is a compact, high-performance audio hub CODEC with SLIMbus interfacing, for smartphones, tablets and other portable audio devices based on the Arizona platform. This patch integrates the wm8997 into the Arizona mfd. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-13 08:43:29 +00:00
obj-$(CONFIG_MFD_ARIZONA) += wm8997-tables.o
endif
mfd: arizona: Add support for WM8998 and WM1814 Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-07-03 15:16:35 +00:00
ifeq ($(CONFIG_MFD_WM8998),y)
obj-$(CONFIG_MFD_ARIZONA) += wm8998-tables.o
endif
mfd: arizona: Support Cirrus Logic CS47L24 and WM1831 This patch adds the regmap configuration tables and core MFD handling for the CS47L24 and WM1831 codecs. Note that compared to the other Arizona codecs, these devices do not have an LDO1 or micsupp regulators, extcon driver, or the DCVDD isolation control. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-11-03 15:08:32 +00:00
ifeq ($(CONFIG_MFD_CS47L24),y)
obj-$(CONFIG_MFD_ARIZONA) += cs47l24-tables.o
endif
mfd: Core support for the WM8400 AudioPlus HiFi CODEC and PMU The WM8400 is a highly integrated audio CODEC and power management unit optimised for use in mobile multimedia applications. This patch adds core support for the WM8400 to the MFD subsystem. Both I2C and SPI access are supported by the hardware but currently only I2C access is implemented. The code is structured to allow SPI support to be slotted in later. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-09-10 17:58:42 +00:00
obj-$(CONFIG_MFD_WM8400) += wm8400-core.o
mfd: Hook WM831x into build system Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-07-27 13:45:58 +00:00
wm831x-objs := wm831x-core.o wm831x-irq.o wm831x-otp.o
mfd: Refactor wm831x AUXADC handling into a separate file In preparation for some additional work on the wm831x AUXADC code move the support into a separate file. This is a simple code motion patch, there should be no functional changes. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-06-02 18:18:53 +00:00
wm831x-objs += wm831x-auxadc.o
mfd: Hook WM831x into build system Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-07-27 13:45:58 +00:00
obj-$(CONFIG_MFD_WM831X) += wm831x.o
mfd: Factor out WM831x I2C I/O from the core driver In preparation for the addition of SPI support for the WM831x move the I2C specific code into a separate file with a separate Kconfig option so the I2C support can be excluded from the build. Also update the 1133-EV1 PMIC module support for SMDK6410 to use the new symbol. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-19 21:57:56 +00:00
obj-$(CONFIG_MFD_WM831X_I2C) += wm831x-i2c.o
mfd: Add WM831x SPI support Implement support for controlling WM831x and WM832x devices using SPI. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-19 22:00:11 +00:00
obj-$(CONFIG_MFD_WM831X_SPI) += wm831x-spi.o
mfd: Add GPIO pin configuration support for WM8350 The WM8350 provides a number of user-configurable pins providing access to various signals generated by the functions on the chip. These are referred to as GPIO pins in the device documentation but in Linux terms they are more general than that, providing configuration of alternate functions. This patch implements support for selecting the alternate functions for these pins. They can also be used as GPIOs in the normal Linux sense - a subsequent patch will add support for doing so. This code was all written by Liam Girdwood and has had minor updates and rearrangements by Mark Brown. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:12 +00:00
wm8350-objs := wm8350-core.o wm8350-regmap.o wm8350-gpio.o
mfd: Split wm8350 IRQ code into a separate file In preparation for refactoring - it's over 700 lines of well-isolated code and having it in a file by itself makes things more managable. While we're at it make sure that we clean up the IRQ if we fail after acquiring it on init. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-10-12 15:15:09 +00:00
wm8350-objs += wm8350-irq.o
mfd: Core support for the WM8350 AudioPlus PMIC The WM8350 is an integrated audio and power management subsystem intended for use as the primary PMIC in mobile multimedia applications. The WM8350 can be controlled via either I2C or SPI - the control interface is provided by a separate module in order to allow greatest flexibility in configuring the kernel. This driver was originally written by Liam Girdwood and has since been updated to current kernel APIs and split up for submission by me. All the heavy lifting here was done by Liam. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:10 +00:00
obj-$(CONFIG_MFD_WM8350) += wm8350.o
mfd: Add I2C control support for WM8350 Implement the I2C control interface for the WM8350. This code was originally written by Liam Girdwood and has been updated for submission by Mark Brown. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 14:58:11 +00:00
obj-$(CONFIG_MFD_WM8350_I2C) += wm8350-i2c.o
mfd: wm8994: Ensure that the whole MFD is built into a single module The MFD part of wm8994 consists of three files wm8994-core.c, wm8994-irq.c and wm8994-regmap.c only wm8994-core.c has a MODULE_DESCRIPTION / LICENSE. These were clearly intended to be built as a single module, but currently are not. This will lead to a tainted kernel when loading modules for wm8894-irq.c and wm8994-regmap.c because are missing a license. This patch fixes this issue by grouping the three files together into a single module. Reported-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-11-19 16:46:14 +00:00
wm8994-objs := wm8994-core.o wm8994-irq.o wm8994-regmap.o
obj-$(CONFIG_MFD_WM8994) += wm8994.o
mfd: Core support for the WM8400 AudioPlus HiFi CODEC and PMU The WM8400 is a highly integrated audio CODEC and power management unit optimised for use in mobile multimedia applications. This patch adds core support for the WM8400 to the MFD subsystem. Both I2C and SPI access are supported by the hardware but currently only I2C access is implemented. The code is structured to allow SPI support to be slotted in later. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-09-10 17:58:42 +00:00
mfd: Add a core driver for TI TPS61050/TPS61052 chips v2 The TPS61050/TPS61052 are boost converters, LED drivers, LED flash drivers and a simple GPIO pin chips. Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Jonas Aberg <jonas.aberg@stericsson.com> Cc: Ola Lilja <ola.o.lilja@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-09 12:02:38 +00:00
obj-$(CONFIG_TPS6105X) += tps6105x.o
mfd: move drivers/i2c/chips/tps65010.c to drivers/mfd Move the tps65010 driver from drivers/i2c/chips to drivers/mfd since it's more of a multi-function device than anything else, and since Jean is trying to vanish drivers/i2c/chips ASAP. One way to think of these chips are as the PMIC family most used with OMAP1 generation chips. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-12-22 11:16:27 +00:00
obj-$(CONFIG_TPS65010) += tps65010.o
mfd: Add TPS6507x support TPS6507x are multi function (PM, touchscreen) chipsets from TI. This commit also changes the corresponding regulator driver from being standalone to an MFD subdevice. Signed-off-by: Todd Fischer <todd.fischer@ridgerun.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-04-08 07:04:55 +00:00
obj-$(CONFIG_TPS6507X) += tps6507x.o
mfd: tps65086: Add driver for the TPS65086 PMIC Add support for the TPS65912 device. It provides communication through I2C and contains the following components: - Regulators - Load switches - GPO controller Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-25 15:50:11 +00:00
obj-$(CONFIG_MFD_TPS65086) += tps65086.o
mfd: Add new mfd device for TPS65217 The TPS65217 chip is a power management IC for Portable Navigation Systems and Tablet Computing devices. It contains the following components: - Regulators - White LED - USB battery charger This patch adds support for tps65217 mfd device. At this time only the regulator functionality is made available. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Reviwed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-11 10:41:41 +00:00
obj-$(CONFIG_MFD_TPS65217) += tps65217.o
mfd: tps65218: Add driver for the TPS65218 PMIC The TPS65218 chip is a power management IC for Portable Navigation Systems and Tablet Computing devices. It contains the following components: - Regulators. - Over Temperature warning and Shut down. This patch adds support for tps65218 mfd device. At this time only the regulator functionality is made available. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-02-06 05:50:12 +00:00
obj-$(CONFIG_MFD_TPS65218) += tps65218.o
mfd: tps65910: Move interrupt implementation code to mfd file In place of implementing the irq support in separate file, moving implementation to main mfd file. The irq files only contains the table and init steps only and does not need extra file to have this only for this purpose. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-13 14:03:58 +00:00
obj-$(CONFIG_MFD_TPS65910) += tps65910.o
mfd: tps65912: Add driver for the TPS65912 PMIC This patch adds support for TPS65912 PMIC MFD core. It provides communication through the I2C and SPI interfaces. It contains the following components: - Regulators - GPIO controller Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-25 15:43:45 +00:00
obj-$(CONFIG_MFD_TPS65912) += tps65912-core.o
mfd: tps65912: Add new mfd device The tps65912 chip is a power management IC. It contains the following components: - Regulators - GPIO controller The core driver is registered as a platform driver, it provides communication through I2C and SPI interfaces. Signed-off-by: Margarita Olaya Cabrera <magi@slimlogic.co.uk> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-06-09 19:50:00 +00:00
obj-$(CONFIG_MFD_TPS65912_I2C) += tps65912-i2c.o
obj-$(CONFIG_MFD_TPS65912_SPI) += tps65912-spi.o
mfd: Add TI TPS80031 mfd core driver TPS80031/ TPS80032 Fully Integrated Power Management with Power Path and Battery Charger. The device provides five configurable step-down converters, 11 general purpose LDOs, USB OTG Module, ADC, RTC, 2 PWM, System Voltage Regulator/Battery Charger with Power Path from USB, 32K clock generator. Add the mfd core driver for TPS80031/TPS80032. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviwed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-14 15:39:28 +00:00
obj-$(CONFIG_MFD_TPS80031) += tps80031.o
mfd: move drivers/i2c/chips/menelaus.c to drivers/mfd ove the menelaus driver from drivers/i2c/chips to drivers/mfd since it's more of a multi-function device than anything else, and since Jean is trying to vanish drivers/i2c/chips ASAP. One way to think of these chips are as the PMIC family most used with OMAP2 generation chips. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-12-22 11:18:02 +00:00
obj-$(CONFIG_MENELAUS) += menelaus.o
mfd: move drivers/i2c/chips/tps65010.c to drivers/mfd Move the tps65010 driver from drivers/i2c/chips to drivers/mfd since it's more of a multi-function device than anything else, and since Jean is trying to vanish drivers/i2c/chips ASAP. One way to think of these chips are as the PMIC family most used with OMAP1 generation chips. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-12-22 11:16:27 +00:00
mfd: Add support for twl6030 irq framework This patch adds support for phoenix interrupt framework. New iInterrupt status register A, B, C are introduced in Phoenix and are cleared on write. Due to the differences in interrupt handling with respect to TWL4030, twl6030-irq.c is created for TWL6030 PMIC Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 23:25:31 +00:00
obj-$(CONFIG_TWL4030_CORE) += twl-core.o twl4030-irq.o twl6030-irq.o
mfd: Add support for TWL4030/5030 dynamic power switching The TWL4030/5030 family of multifunction devices allows board-specific control of the the various regulators, clock and reset lines through 'scripts' that are loaded into its memory. This allows for Dynamic Power Switching (DPS). Implement board-independent core support for DPS that is then used by board-specific code to load custom DPS scripts. Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-08-31 16:32:18 +00:00
obj-$(CONFIG_TWL4030_POWER) += twl4030-power.o
MFD: twl4030-codec -> twl4030-audio: Rename the driver Rename the driver, and header file from twl4030-codec to twl4030-audio. To avoid breakage change depending drivers at the same time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> CC: Misael Lopez Cruz <misael.lopez@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-31 09:02:49 +00:00
obj-$(CONFIG_MFD_TWL4030_AUDIO) += twl4030-audio.o
mfd: twl6040: Rename the core driver After the regmap_irq conversion there is no need to call the driver as twl6040-core.c since there is only one c file remained. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-10-11 11:55:33 +00:00
obj-$(CONFIG_TWL6040_CORE) += twl6040.o
mfd: TWL4030 core driver This patch adds the core of the TWL4030 driver, which supports chips including the TPS65950. These chips are multi-function; see http://focus.ti.com/docs/prod/folders/print/tps65950.html Public specs are in the works. For now, the block diagram on the second page of the datasheet is fairly informative. There are some known issues with this core code. Most notably, the IRQ dispatching needs simplification (to use more of genirq), generalization (integrating support for secondary IRQ dispatch as well as primary, and removing the build dependency on OMAP), and then probably updating to leverage threaded IRQ support (expected to arrive in mainline "soon"). Once the core is in mainline, drivers for other parts of this chip can follow its lead and start swimming upstream too. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-10-15 10:15:39 +00:00
mfd: fsl-imx25-tsadc: Register touchscreen ADC driver This is the core driver for imx25 touchscreen/adc driver. The module has one shared ADC and two different conversion queues which use the ADC. The two queues are identical. Both can be used for general purpose ADC but one is meant to be used for touchscreens. This driver is the core which manages the central components and registers of the TSC/ADC unit. It manages the IRQs and forwards them to the correct components. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Denis Carikli <denis@eukrea.com> [ensure correct ADC clock depending on the IPG clock] Signed-off-by: Juergen Borleis <jbe@pengutronix.de> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-12-14 13:53:50 +00:00
obj-$(CONFIG_MFD_MX25_TSADC) += fsl-imx25-tsadc.o
mfd: Add mc13892 support to mc13xxx mc13892 is the companion PMIC for Freescale's i.MX51. It's similar enough to mc13782 to support it in a single driver. This patch introduces enough compatibility cruft to keep all users of the superseded mc13783 driver unchanged. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-28 14:37:20 +00:00
obj-$(CONFIG_MFD_MC13XXX) += mc13xxx-core.o
mfd: Move the mc13xxx-core spi specific code into a separate module All spi specific code is moved into a new module. The mc13xxx struct moves to a new local include file by necessity. A new config choice selects the SPI bus type support and by default is value of SPI_MASTER to remain compatible with existing configs. Signed-off-by: Marc Reilly <marc@cpdesign.com.au> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-04-01 06:41:38 +00:00
obj-$(CONFIG_MFD_MC13XXX_SPI) += mc13xxx-spi.o
mfd: Add mc13xxx i2c driver Adds support for mc13xxx family ICs connected via i2c. Signed-off-by: Marc Reilly <marc@cpdesign.com.au> Acked-by: Oskar Schirmer <oskar@scara.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-04-01 06:41:39 +00:00
obj-$(CONFIG_MFD_MC13XXX_I2C) += mc13xxx-i2c.o
mfd: Add Freescale MC13783 driver This driver provides the core Freescale MC13783 support. It registers the client platform_devices and provides access to the A/D converter. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-08-18 23:40:28 +00:00
[ARM] 5127/1: Core MFD support This patch provides a common subdevice registration system for MFD type chips, using platfrom device. Signed-off-by: Ian Molton <spyro@f2s.com> Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-27 09:37:19 +00:00
obj-$(CONFIG_MFD_CORE) += mfd-core.o
mfd: add PCAP driver The PCAP Asic as present on EZX phones is a multi function device with voltage regulators, ADC, touch screen controller, RTC, USB transceiver, leds controller, and audio codec. It has two SPI ports, typically one is connected to the application processor and another to the baseband, this driver provides read/write functions to its registers, irq demultiplexer and ADC queueing/abstraction. This chip is used on a lot of Motorola phones, it was manufactured by TI as a custom product with the name PTWL93017, later this design evolved into the ATLAS PMIC from Freescale (MC13783). Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-05-28 18:43:37 +00:00
obj-$(CONFIG_EZX_PCAP) += ezx-pcap.o
[MFD] Add multimedia communication port core support Add support for the core of the multimedia communication port framework. This is a port used to communicate with devices with two DMA paths and a control path. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-08-18 09:06:59 +00:00
obj-$(CONFIG_MCP) += mcp-core.o
[MFD] Add SA11x0 MCP support This adds support for the MCP interface found on SA11x0 devices. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-08-18 09:08:15 +00:00
obj-$(CONFIG_MCP_SA11X0) += mcp-sa11x0.o
[MFD] Add code UCB1200/UCB1300 device support Add the core device support code for the Philips UCB1200 and UCB1300 devices. Also includes the following from Pavel: This fixes u32 vs. pm_message_t confusion and uses cleaner try_to_freeze() [fixing compilation as a side-effect on newer kernels.] Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-11 09:26:31 +00:00
obj-$(CONFIG_MCP_UCB1200) += ucb1x00-core.o
mfd: smsc: Add support for smsc gpio io/keypad driver smsc ece1099 is a keyboard scan or gpio expansion device. The patch create keypad and gpio expander child for this multi function smsc driver. Cc: Benoit Cousson <b-cousson@ti.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-10-01 11:01:22 +00:00
obj-$(CONFIG_MFD_SMSC) += smsc-ece1099.o
[MFD] Add code UCB1200/UCB1300 touchscreen support Add support for Philips UCB1200 and UCB1300 touchscreen interfaces found on ARM devices. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-11 09:26:57 +00:00
obj-$(CONFIG_MCP_UCB1200_TS) += ucb1x00-ts.o
[MFD] Add code UCB1200/UCB1300 assabet platform support Add support for Intel assabet specific board support for UCB1200/UCB1300 devices. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-11 09:27:23 +00:00
ifeq ($(CONFIG_SA1100_ASSABET),y)
obj-$(CONFIG_MCP_UCB1200) += ucb1x00-assabet.o
endif
[ARM] 5184/1: Split ucb1400_ts into core and touchscreen This patch splits ucb1400_ts into ucb1400_ts and ucb1400_core. Since this chip supports more features than only touchscreen, it was necessary to prepare it for feature addition. The previous functionality is preserved by applying this patch. [Build fixes for non-ARM by Stephen Rothwell and Takashi Iwai] Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-03 20:34:08 +00:00
obj-$(CONFIG_UCB1400_CORE) += ucb1400_core.o
mfd: add missing Kconfig entry for da903x This one was accidentally left out during the rc1 mfd merge. Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-10-24 15:10:05 +00:00
mfd: move drivers/i2c/chips/tps65010.c to drivers/mfd Move the tps65010 driver from drivers/i2c/chips to drivers/mfd since it's more of a multi-function device than anything else, and since Jean is trying to vanish drivers/i2c/chips ASAP. One way to think of these chips are as the PMIC family most used with OMAP1 generation chips. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-12-22 11:16:27 +00:00
obj-$(CONFIG_PMIC_DA903X) += da903x.o
MFD: DA9052/53 MFD core module The DA9052/53 is a highly integrated PMIC subsystem with supply domain flexibility to support wide range of high performance application. It provides voltage regulators, GPIO controller, Touch Screen, RTC, Battery control and other functionality. This patch is functionally tested on Samsung SMDKV6410. Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-12 14:36:56 +00:00
mfd: da9052: Introduce da9052-irq.c Create a da9052-irq.c file so that it can handle interrupt related functions. This is useful for allowing the da9052 drivers to use such functions when dealing with da9052 interrupts. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-10-04 03:15:05 +00:00
obj-$(CONFIG_PMIC_DA9052) += da9052-irq.o
MFD: DA9052/53 MFD core module The DA9052/53 is a highly integrated PMIC subsystem with supply domain flexibility to support wide range of high performance application. It provides voltage regulators, GPIO controller, Touch Screen, RTC, Battery control and other functionality. This patch is functionally tested on Samsung SMDKV6410. Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-12 14:36:56 +00:00
obj-$(CONFIG_PMIC_DA9052) += da9052-core.o
MFD: DA9052/53 MFD core module add SPI support v2 This patch add SPI support for DA9052/53 MFD core module. This patch is functionally tested on Samsung SMDKV6410. Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-12 15:07:41 +00:00
obj-$(CONFIG_MFD_DA9052_SPI) += da9052-spi.o
MFD: DA9052/53 MFD core module The DA9052/53 is a highly integrated PMIC subsystem with supply domain flexibility to support wide range of high performance application. It provides voltage regulators, GPIO controller, Touch Screen, RTC, Battery control and other functionality. This patch is functionally tested on Samsung SMDKV6410. Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-12 14:36:56 +00:00
obj-$(CONFIG_MFD_DA9052_I2C) += da9052-i2c.o
mfd: ac100: Add driver for X-Powers AC100 audio codec / RTC combo IC The AC100 is a multifunction device with an audio codec subsystem and an RTC subsystem. These two subsystems share a common register space and host interface. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-07-08 14:33:37 +00:00
obj-$(CONFIG_MFD_AC100) += ac100.o
mfd: AXP20x: Add mfd driver for AXP20x PMIC This patch introduces the preliminary support for PMICs X-Powers AXP202 and AXP209. The AXP209 and AXP202 are the PMUs (Power Management Unit) used by A10, A13 and A20 SoCs and developed by X-Powers, a sister company of Allwinner. The core enables support for two subsystems: - PEK (Power Enable Key) - Regulators Signed-off-by: Carlo Caione <carlo@caione.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-05-01 12:29:27 +00:00
obj-$(CONFIG_MFD_AXP20X) += axp20x.o
mfd: axp20x: Split the driver into core and i2c bits The axp20x driver assumes the device is i2c based. This is not the case with later chips, which use a proprietary 2 wire serial bus by Allwinner called "Reduced Serial Bus". This patch follows the example of mfd/wm831x and splits it into an interface independent core, and an i2c specific glue layer. MFD_AXP20X and the new MFD_AXP20X_I2C are changed to tristate symbols, allowing the driver to be built as modules. Whitespace and other style errors in the moved i2c specific code have been fixed. Included but unused header files are removed as well. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-02-12 02:02:42 +00:00
obj-$(CONFIG_MFD_AXP20X_I2C) += axp20x-i2c.o
mfd: axp20x: Add support for RSB based AXP223 PMIC The AXP223 is a new PMIC commonly paired with Allwinner A23/A33 SoCs. It is functionally identical to AXP221; only the regulator default voltage/status and the external host interface are different. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-02-12 02:02:44 +00:00
obj-$(CONFIG_MFD_AXP20X_RSB) += axp20x-rsb.o
MFD: DA9052/53 MFD core module The DA9052/53 is a highly integrated PMIC subsystem with supply domain flexibility to support wide range of high performance application. It provides voltage regulators, GPIO controller, Touch Screen, RTC, Battery control and other functionality. This patch is functionally tested on Samsung SMDKV6410. Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-12 14:36:56 +00:00
mfd: Add LP3943 MFD driver LP3943 has 16 output pins which can be used as GPIO expander and PWM generator. * Regmap I2C interface for R/W LP3943 registers * Atomic operations for output pin assignment The driver should check whether requested pin is available or not. If the pin is already used, pin request returns as a failure. A driver data, 'pin_used' is checked when gpio_request() and pwm_request() are called. If the pin is available, then pin_used is set. And it is cleared when gpio_free() and pwm_free(). * Device tree support Compatible strings for GPIO and PWM driver. LP3943 platform data is PWM related, so parsing the device tree is implemented in the PWM driver. Signed-off-by: Milo Kim <milo.kim@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-12-06 02:18:41 +00:00
obj-$(CONFIG_MFD_LP3943) += lp3943.o
mfd: Add lp8788 mfd driver TI LP8788 PMU provides regulators, battery charger, ADC, RTC, backlight driver and current sinks. This MFD patch supports the I2C communication using the regmap, the interrupt handling using the linear IRQ domain and configurable platform data structures for each driver module. (Driver Architecture) < mfd devices > LP8788 HW .......... mfd .......... regulator drivers I2C power supply driver IRQs iio adc driver rtc driver backlight driver current sink drivers o regulators : LDOs and BUCKs o power supply : Battery charger o iio adc : Battery voltage/temperature o rtc : RTC and alarm o backlight o current sink : LED and vibrator All MFD device modules are registered by LP8788 MFD core driver. For sharing information such like the virtual IRQ number, MFD core driver uses the resource structure. Then each module can retrieve the specific IRQ number and detect it in the IRQ thread. Configurable platform data is handled in each driver module. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-19 16:53:33 +00:00
obj-$(CONFIG_MFD_LP8788) += lp8788.o lp8788-irq.o
mfd: DA9055 core driver This is the DA9055 MFD core driver that instantiate all the dependent component drivers and provides them the device access via I2C. This patch is functionally tested on Samsung SMDK6410. Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-14 13:24:50 +00:00
da9055-objs := da9055-core.o da9055-i2c.o
obj-$(CONFIG_MFD_DA9055) += da9055.o
mfd: da9062: Supply core driver Add MFD core driver support for DA9062 Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-07-01 13:11:32 +00:00
obj-$(CONFIG_MFD_DA9062) += da9062-core.o
mfd: da9063: Add IRQ support This patch adds a regmap irqchip for DA9063 IRQs. It depends on git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap.git tags/regmap-irq-ack-mask Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Mark Brown <broonie@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-07-29 17:00:44 +00:00
da9063-objs := da9063-core.o da9063-irq.o da9063-i2c.o
mfd: da9063: Add Dialog DA9063 core driver This is MFD module providing access to registers and interrupts of DA906x series PMIC. It is used by other functional modules, registered as MFD cells. Driver uses regmap with paging to access extended register list. Register map is divided into two pages, where the second page is used during initialisation. This module provides support to following functional cells: - Regulators - RTC - HWMON - OnKey (power key misc input device) - Vibration (force-feedback input device) - Watchdog - LEDs Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Mark Brown <broonie@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-07-29 17:00:43 +00:00
obj-$(CONFIG_MFD_DA9063) += da9063.o
mfd: Add support for DA9150 combined charger & fuel-gauge device DA9150 is a combined Charger and Fuel-Gauge IC, with additional GPIO and GPADC functionality. Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-12-22 16:51:06 +00:00
obj-$(CONFIG_MFD_DA9150) += da9150-core.o
mfd: da9062: Supply core driver Add MFD core driver support for DA9062 Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-07-01 13:11:32 +00:00
mfd: max14577: Add max14577 MFD driver core This patch adds max14577 core/irq driver to support MUIC(Micro USB IC) device and charger device and support irq domain method to control internal interrupt of max14577 device. Also, this patch supports DT binding with max14577_i2c_parse_dt(). The MAXIM 14577 chip contains Micro-USB Interface Circuit and Li+ Battery Charger. It contains accessory and USB charger detection logic. It supports USB 2.0 Hi-Speed, UART and stereo audio signals over Micro-USB connector. The battery charger is compliant with the USB Battery Charging Specification Revision 1.1. It has also SFOUT LDO output for powering USB devices. Reviewed-by: Mark Brown <broonie@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-11-22 15:51:05 +00:00
obj-$(CONFIG_MFD_MAX14577) += max14577.o
mfd: max77620: Add core driver for MAX77620/MAX20024 MAX77620/MAX20024 are Power Management IC from the MAXIM. It supports RTC, multiple GPIOs, multiple DCDC and LDOs, watchdog, clock etc. Add MFD drier to provides common support for accessing the device; additional drivers is developed on respected subsystem in order to use the functionality of the device. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mallikarjun Kasoju <mkasoju@nvidia.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-04-28 09:58:56 +00:00
obj-$(CONFIG_MFD_MAX77620) += max77620.o
mfd: max77686: Convert to use regmap_irq By using the generic IRQ support in the Register map API, it is possible to get rid max77686-irq.c and simplify the code. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-04 20:24:04 +00:00
obj-$(CONFIG_MFD_MAX77686) += max77686.o
mfd: max77693: Handle IRQs using regmap This patch modifies mfd driver to use regmap for handling interrupts. It allows to simplify irq handling process. This modifications needed to make small changes in function drivers, which use interrupts. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-05-21 06:52:48 +00:00
obj-$(CONFIG_MFD_MAX77693) += max77693.o
mfd: max77843: Add max77843 MFD driver core driver This patch adds MAX77843 core/irq driver to support PMIC, MUIC(Micro USB Interface Controller), Charger, Fuel Gauge, LED and Haptic device. Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com> Signed-off-by: Beomho Seo <beomho.seo@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-02 10:10:34 +00:00
obj-$(CONFIG_MFD_MAX77843) += max77843.o
mfd: Add MAX8907 core driver The MAX8907 is an I2C-based power-management IC containing voltage regulators, a reset controller, a real-time clock, and a touch-screen controller. The original driver was written by: * Gyungoh Yoo <jack.yoo@maxim-ic.com> Various fixes and enhancements by: * Jin Park <jinyoungp@nvidia.com> * Tom Cherry <tcherry@nvidia.com> * Prashant Gaikwad <pgaikwad@nvidia.com> * Dan Willemsen <dwillemsen@nvidia.com> * Laxman Dewangan <ldewangan@nvidia.com> During upstreaming, I (swarren): * Converted to regmap. * Converted to regmap-irq. * Allowed probing from device tree. * Renamed from max8907c->max8907, since the driver covers at least the C and B revisions. * General cleanup. Signed-off-by: Gyungoh Yoo <jack.yoo@maxim-ic.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> #v3 Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-08-15 16:28:46 +00:00
obj-$(CONFIG_MFD_MAX8907) += max8907.o
mfd: Initial max8925 support Basic Max8925 support, which is a power management IC from Maxim Semiconductor. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-01-08 11:29:23 +00:00
max8925-objs := max8925-core.o max8925-i2c.o
obj-$(CONFIG_MFD_MAX8925) += max8925.o
mfd: Add MAX8997/8966 IRQ control This patch enables IRQ handling for MAX8997/8966 chips. Please note that Fuel-Gauge-related IRQs are not implemented in this initial release. The fuel gauge module in MAX8997 is identical to MAX17042, which is already in Linux kernel. In order to use the already-existing MAX17042 driver for fuel gauge module in MAX8997, the main interrupt handler of MAX8997 should relay related interrupts to MAX17042 driver. However, in order to do this, we need to modify MAX17042 driver as well because MAX17042 driver does not have any interrupt handlers for now. We are not going to implement this in this initial release as it is not crucial in basic operations of MAX8997. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-24 06:54:45 +00:00
obj-$(CONFIG_MFD_MAX8997) += max8997.o max8997-irq.o
mfd: Add MAX8998 interrupts support Use genirq and provide seperated file for interrupts support. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-10 16:36:39 +00:00
obj-$(CONFIG_MFD_MAX8998) += max8998.o max8998-irq.o
mfd: PCF50633 core driver This patch implements the core of the PCF50633 driver. This core driver has generic register read/write functions and does interrupt management for its sub devices. Signed-off-by: Balaji Rao <balajirrao@openmoko.org> Cc: Andy Green <andy@openmoko.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-09 00:49:01 +00:00
mfd: Move pcf50633 irq related functions to its own file. This reduces code clutter a bit and will ease an migration to genirq. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-05-12 00:10:56 +00:00
pcf50633-objs := pcf50633-core.o pcf50633-irq.o
obj-$(CONFIG_MFD_PCF50633) += pcf50633.o
mfd: PCF50633 gpio support What the PCF05633 calls as a 'GPIO' is much more than the GPIO in the linux sense and there are only 4 of them - which means, the gpiolib is not used here. Signed-off-by: Balaji Rao <balajirrao@openmoko.org> Cc: Andy Green <andy@openmoko.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-09 00:49:37 +00:00
obj-$(CONFIG_PCF50633_ADC) += pcf50633-adc.o
mfd: add U300 AB3100 core support This adds a core driver for the AB3100 mixed-signal circuit found in the ST-Ericsson U300 series platforms. This driver is a singleton proxy for all accesses to the AB3100 sub-drivers which will be merged on top of this one, RTC, regulators, battery and system power control, vibrator, LEDs, and an ALSA codec. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mike Rapoport <mike@compulab.co.il> Reviewed-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-05-21 21:17:06 +00:00
obj-$(CONFIG_PCF50633_GPIO) += pcf50633-gpio.o
mfd: AB3100 register access change to abx500 API The interface for the AB3100 is changed to make way for the ABX500 family of chips: AB3550, AB5500 and future ST-Ericsson Analog Baseband chips. The register access functions are moved out to a separate struct abx500_ops. In this way the interface is moved from the implementation and the sub functionality drivers can keep their interface intact when chip infrastructure and communication mechanisms changes. We also define the AB3550 device IDs and the AB3550 platform data struct and convert the catenated 32bit event to an array of 3 x 8bits. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-05-01 16:26:20 +00:00
obj-$(CONFIG_ABX500_CORE) += abx500-core.o
mfd: add U300 AB3100 core support This adds a core driver for the AB3100 mixed-signal circuit found in the ST-Ericsson U300 series platforms. This driver is a singleton proxy for all accesses to the AB3100 sub-drivers which will be merged on top of this one, RTC, regulators, battery and system power control, vibrator, LEDs, and an ALSA codec. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mike Rapoport <mike@compulab.co.il> Reviewed-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-05-21 21:17:06 +00:00
obj-$(CONFIG_AB3100_CORE) += ab3100-core.o
mfd: AB3100 OTP readout This adds the ability to read out OTP (One-Time Programmable) registers in the AB3100 MFD ASIC. It's a simple sysfs file you can cat to prompt. The OTP registers of the AB3100 are used to store various device-unique information such as customer ID, product flags and the 3GPP standard IMEI (International Mobile Equipment Indentity) number. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-08-18 20:52:26 +00:00
obj-$(CONFIG_AB3100_OTP) += ab3100-otp.o
mfd: AB8500 debugfs This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-13 14:05:04 +00:00
obj-$(CONFIG_AB8500_DEBUG) += ab8500-debugfs.o
mfd: Add new ab8500 GPADC driver AB8500 GPADC driver used to convert Acc and battery/ac/usb voltage Signed-off-by: Arun Murthy <arun.murthy@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-02-22 09:11:13 +00:00
obj-$(CONFIG_AB8500_GPADC) += ab8500-gpadc.o
mach-ux500: move the DB8500 PRCMU driver to MFD We have decided that this function arbiter fits better in the MFD subsystem. Since we need to concatenate the split header files we move it basically like this: mv mach-ux500/prcmu-db8500.c drivers/mfd/db8500-prcmu.c mv mach-ux500/include/mach/prcmu-defs.h include/linux/mfd/db8500-prcmu.h mv mach-ux500/include/mach/prcmu-regs.h drivers/mfd/db8500-prcmu-regs.h mach-ux500/include/mach/prcmu.h >> include/linux/mfd/db8500-prcmu.h rm arch/arm/mach-ux500/include/mach/prcmu.h Then we update different #include statements and Makefile orders etc to make the PRCMU driver compile, link and boot in the new place without really changing any code. Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-05-15 20:53:56 +00:00
obj-$(CONFIG_MFD_DB8500_PRCMU) += db8500-prcmu.o
mfd: Remove confusing ab8500-i2c file and merge into ab8500-core ab8500-i2c is used as core code to register the ab8500 device. After allocating ab8500 memory, it immediately calls into ab8500-core where the real initialisation takes place. This patch moves all core registration and memory allocation into the true ab8500-core file and removes ab8500-i2c completely. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-19 15:21:37 +00:00
# ab8500-core need to come after db8500-prcmu (which provides the channel)
obj-$(CONFIG_AB8500_CORE) += ab8500-core.o ab8500-sysctrl.o
V4L/DVB: mfd: Add support for the timberdale FPGA The timberdale FPGA is found on the Intel in-Vehicle Infotainment reference board russelville. The driver is a PCI driver which chunks up the I/O memory and distributes interrupts to a number of platform devices for each IP inside the FPGA. Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-04 11:18:52 +00:00
obj-$(CONFIG_MFD_TIMBERDALE) += timberdale.o
obj-$(CONFIG_PMIC_ADP5520) += adp5520.o
mfd: Kontron PLD mfd driver Add core MFD driver for the on-board PLD found on some Kontron embedded modules. The PLD device may provide functions like watchdog, GPIO, UART and I2C bus. The following modules are supported: * COMe-bIP# * COMe-bPC2 (ETXexpress-PC) * COMe-bSC# (ETXexpress-SC T#) * COMe-cCT6 * COMe-cDC2 (microETXexpress-DC) * COMe-cPC2 (microETXexpress-PC) * COMe-mCT10 * ETX-OH Originally-From: Michael Brunner <michael.brunner@kontron.com> Signed-off-by: Kevin Strasser <kevin.strasser@linux.intel.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Darren Hart <dvhart@linux.intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-24 04:00:03 +00:00
obj-$(CONFIG_MFD_KEMPLD) += kempld-core.o
mfd: intel_quark_i2c_gpio: Add Intel Quark X1000 I2C-GPIO MFD Driver In Quark X1000, there's a single PCI device that provides both an I2C controller and a GPIO controller. This MFD driver will split the 2 devices for their respective drivers. This patch is based on Josef Ahmad's initial work for Quark enabling. Acked-by: Michael Turquette <mturquette@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Weike Chen <alvin.chen@intel.com> Signed-off-by: Raymond Tan <raymond.tan@intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-02 02:52:51 +00:00
obj-$(CONFIG_MFD_INTEL_QUARK_I2C_GPIO) += intel_quark_i2c_gpio.o
mfd: Add support for the RDC321x southbridge This patch adds a new MFD driver for the RDC321x southbridge. This southbridge is always present in the RDC321x System-on-a-Chip and provides access to some GPIOs as well as a watchdog. Access to these two functions is done using the southbridge PCI device configuration space. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-21 00:06:05 +00:00
obj-$(CONFIG_LPC_SCH) += lpc_sch.o
mfd: Add LPC driver for Intel ICH chipsets This driver currently creates resources for use by a forthcoming ICH chipset GPIO driver. It could be expanded to create the resources for converting the esb2rom (mtd) and iTCO_wdt (wdt), and potentially more, drivers to use the mfd model. Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-28 14:43:10 +00:00
obj-$(CONFIG_LPC_ICH) += lpc_ich.o
mfd: Add support for the RDC321x southbridge This patch adds a new MFD driver for the RDC321x southbridge. This southbridge is always present in the RDC321x System-on-a-Chip and provides access to some GPIOs as well as a watchdog. Access to these two functions is done using the southbridge PCI device configuration space. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-21 00:06:05 +00:00
obj-$(CONFIG_MFD_RDC321X) += rdc321x-southbridge.o
mfd: Janz CMOD-IO PCI MODULbus Carrier Board support The Janz CMOD-IO PCI MODULbus carrier board is a PCI to MODULbus bridge, which may host many different types of MODULbus daughterboards, including CAN and GPIO controllers. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Reviewed-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-04-07 07:43:00 +00:00
obj-$(CONFIG_MFD_JANZ_CMODIO) += janz-cmodio.o
mfd: Add JZ4740 ADC driver This patch adds a MFD driver for the JZ4740 ADC unit. The driver is used to demultiplex IRQs and synchronize access to shared registers between the battery, hwmon and (future) touchscreen driver. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-07-12 01:48:08 +00:00
obj-$(CONFIG_MFD_JZ4740_ADC) += jz4740-adc.o
mfd: Add TPS6586x driver Add mfd core driver for TPS6586x PMICs family. The driver provides I/O access for the sub-device drivers and performs regstration of the sub-devices based on the platform requirements. In addition it implements GPIOlib interface for the chip GPIOs. TODO: - add interrupt support - add platform data for PWM, backlight leds and charger Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-08-10 23:11:04 +00:00
obj-$(CONFIG_MFD_TPS6586X) += tps6586x.o
mfd: Add VIA VX855 multi-function device support This device has GPIO, SPI and I2C capabilities. The hardware can be found in the OLPC XO-1.5 laptop. Based on earlier work by Harald Welte. Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-30 20:55:41 +00:00
obj-$(CONFIG_MFD_VX855) += vx855.o
[media] MFD: WL1273 FM Radio: MFD driver for the FM radio This is the core of the WL1273 FM radio driver, it connects the two child modules. The two child drivers are drivers/media/radio/radio-wl1273.c and sound/soc/codecs/wl1273.c. The radio-wl1273 driver implements the V4L2 interface and communicates with the device. The ALSA codec offers digital audio, without it only analog audio is available. Signed-off-by: Matti J. Aaltonen <matti.j.aaltonen@nokia.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-10 14:41:33 +00:00
obj-$(CONFIG_MFD_WL1273_CORE) += wl1273-core.o
mfd: si476x: Add header files and Kbuild plumbing This patch adds all necessary header files and Kbuild plumbing for the core driver for Silicon Laboratories Si476x series of AM/FM tuner chips. The driver as a whole is implemented as an MFD device and this patch adds a core portion of it that provides all the necessary functionality to the two other drivers that represent radio and audio codec subsystems of the chip. Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-18 16:58:30 +00:00
si476x-core-y := si476x-cmd.o si476x-prop.o si476x-i2c.o
obj-$(CONFIG_MFD_SI476X_CORE) += si476x-core.o
mfd: Add cs5535-mfd driver for AMD Geode's CS5535/CS5536 support Add an MFD driver to handle the ISA device on CS5535 and CS5536 southbridges. This ISA bridge is actually multiple devices: GPIOs, MFGPTs, etc. Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-11-26 10:52:35 +00:00
obj-$(CONFIG_MFD_CS5535) += cs5535-mfd.o
mfd: omap-usb-tll: HOST TLL platform driver The platform driver for the TLL component of the OMAP USB host controller is implemented. Depending on the TLL hardware revision , the TLL channels are configured. The USB HS core driver uses this driver through exported APIs from the TLL platform driver. usb_tll_enable and usb_tll_disble are the exported APIs of the USB TLL platform driver. Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com> Reviewed-by: Partha Basak <parthab@india.ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-16 13:31:08 +00:00
obj-$(CONFIG_MFD_OMAP_USB_HOST) += omap-usb-host.o omap-usb-tll.o
mfd: Move ssbi driver into drivers/mfd There is no reason for ssbi to have its own top-level driver directory when the only users of this interface are all MFD drivers. The only mainline driver using it at the moment (PM8921) is marked broken and in fact does not compile. I have verified that fixing the trivial build breakage in pm8921 links in the new ssbi code just fine, but that can be a separate patch. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: David Brown <davidb@codeaurora.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-29 22:00:19 +00:00
obj-$(CONFIG_MFD_PM8921_CORE) += pm8921-core.o ssbi.o
mfd: qcom-rpm: Driver for the Qualcomm RPM Driver for the Resource Power Manager (RPM) found in Qualcomm 8660, 8960 and 8064 based devices. The driver exposes resources that child drivers can operate on; to implementing regulator, clock and bus frequency drivers. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-26 21:51:00 +00:00
obj-$(CONFIG_MFD_QCOM_RPM) += qcom_rpm.o
mfd: Add support for Qualcomm SPMI PMICs The Qualcomm SPMI PMIC chips are components used with the Snapdragon 800 series SoC family. This driver exists largely as a glue mfd component, it exists to be an owner of an SPMI regmap for children devices described in device tree. Signed-off-by: Josh Cartwright <joshc@codeaurora.org> Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-08-01 14:30:48 +00:00
obj-$(CONFIG_MFD_SPMI_PMIC) += qcom-spmi-pmic.o
mfd: Add Makefile and Kconfig Entries for tps65911 comparator Base on Mark's comment [1], I make the Kconfig entry invisible to users. [1] https://lkml.org/lkml/2011/5/14/136 Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-06-23 02:15:51 +00:00
obj-$(CONFIG_TPS65911_COMPARATOR) += tps65911-comparator.o
mfd: Add support for TPS65090 TPS65090 is a Texas Instrument PMIC. It contains 3 Step-Down converters, 2 always on LDO's and 7 current limited load switches. Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-16 05:40:19 +00:00
obj-$(CONFIG_MFD_TPS65090) += tps65090.o
mfd: Add AAT2870 mfd driver Add mfd core driver for AnalogicTech AAT2870. The AAT2870 is communication through I2C and contains backlight and regulator components. Signed-off-by: Jin Park <jinyoungp@nvidia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-04 17:48:12 +00:00
obj-$(CONFIG_MFD_AAT2870_CORE) += aat2870-core.o
mfd: atmel-flexcom: Add a driver for Atmel Flexible Serial Communication Unit This driver supports the new Atmel Flexcom. The Flexcom is a wrapper which integrates one SPI controller, one I2C controller and one USART. Only one function can be enabled at a time. This driver selects the function once for all, when the Flexcom is probed, according to the value of the new "atmel,flexcom-mode" device tree property. This driver has chosen to present the Flexcom to the system as a MFD so the implementation is seamless for the existing Atmel SPI, I2C and USART drivers. Also the Flexcom embeds FIFOs: the latest patches of the SPI, I2C and USART drivers take advantage of this new feature. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-09-28 09:13:26 +00:00
obj-$(CONFIG_MFD_ATMEL_FLEXCOM) += atmel-flexcom.o
mfd: Add atmel-hlcdc driver The HLCDC IP available on some Atmel SoCs (i.e. at91sam9n12, at91sam9x5 family or sama5d3 family) exposes 2 subdevices: - a display controller (controlled by a DRM driver) - a PWM chip The MFD device provides a regmap and several clocks (those connected to this hardware block) to its subdevices. This way concurrent accesses to the iomem range are handled by the regmap framework, and each subdevice can safely access HLCDC registers. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Tested-by: Anthony Harivel <anthony.harivel@emtrion.de> Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-10-06 13:48:43 +00:00
obj-$(CONFIG_MFD_ATMEL_HLCDC) += atmel-hlcdc.o
mfd: Add support for Intel Sunrisepoint LPSS devices The new coming Intel platforms such as Skylake will contain Sunrisepoint PCH. The main difference to the previous platforms is that the LPSS devices are compound devices where usually main (SPI, HSUART, or I2C) and DMA IPs are present. This patch brings the driver for such devices found on Sunrisepoint PCH. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-07-27 15:04:03 +00:00
obj-$(CONFIG_MFD_INTEL_LPSS) += intel-lpss.o
obj-$(CONFIG_MFD_INTEL_LPSS_PCI) += intel-lpss-pci.o
obj-$(CONFIG_MFD_INTEL_LPSS_ACPI) += intel-lpss-acpi.o
mfd: Add Intel MSIC driver Add support for Intel MSIC chip found on Intel Medfield platforms. This chip embeds several subdevices: audio, ADC, GPIO, power button, etc. The driver creates platform device for each subdevice. We also provide an MSIC register access API which should replace the more generic SCU IPC interface currently used. Existing drivers can choose whether they convert to this new API or stick with the SCU IPC interface. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-09-21 11:03:07 +00:00
obj-$(CONFIG_MFD_INTEL_MSIC) += intel_msic.o
mfd: palmas PMIC device support Kconfig Add the new palmas MFD to Kconfig and Makefile Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-15 06:48:57 +00:00
obj-$(CONFIG_MFD_PALMAS) += palmas.o
mfd: Add viperboard driver Add mfd driver for Nano River Technologies viperboard. Signed-off-by: Lars Poeschel <poeschel@lemonage.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-05 14:48:23 +00:00
obj-$(CONFIG_MFD_VIPERBOARD) += viperboard.o
mfd: Add support for RICOH PMIC RC5T583 Ricoh power management IC RC5T583 contains is multi functional device having multiple sub devices inside this. This device has multiple dcdc/ldo regulators, gpios, interrupt controllers, on-key, RTCs, ADCs. This device have 4 DCDCs, 8 LDOs, 8 GPIOs, 6 ADCs, 3 RTCs etc. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-02-28 13:05:17 +00:00
obj-$(CONFIG_MFD_RC5T583) += rc5t583.o rc5t583-irq.o
mfd: RK808: Add new mfd driver for RK808 The RK808 chip is a power management IC for multimedia and handheld devices. It contains the following components: - Regulators - RTC - Clkout The RK808 core driver is registered as a platform driver and provides communication through I2C with the host device for the different components. Signed-off-by: Chris Zhong <zyw@rock-chips.com> Signed-off-by: Zhang Qing <zhangqing@rock-chips.com> Tested-by: Heiko <heiko@sntech.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-09-03 13:51:44 +00:00
obj-$(CONFIG_MFD_RK808) += rk808.o
mfd: Add Ricoh RN5T618 PMIC core driver Ricoh RN5T618 is a power management IC which integrates 3 step-down DCDC converters, 7 low-dropout regulators, a Li-ion battery charger, fuel gauge, ADC, GPIOs and a watchdog timer. This commit adds a MFD core driver to support the I2C communication with the device. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-08-30 12:50:23 +00:00
obj-$(CONFIG_MFD_RN5T618) += rn5t618.o
mfd: Rename s5m file and directories to samsung Previously, Samsung PMIC naming rule start with prefix of s5m. But Naming rule is changed. From now on, Prefix will be changed to s2m. So, To support pmic series of s5m and s2m, change mfd file and directory name. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-11 12:06:40 +00:00
obj-$(CONFIG_MFD_SEC_CORE) += sec-core.o sec-irq.o
mfd: Add syscon driver based on regmap Add regmap based syscon driver. This is usually used for access misc bits in registers which does not belong to a specific module, for example, IMX IOMUXC GPR and ANATOP. With this driver, client can use generic regmap API to access registers which are registered into syscon. Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-05 02:57:13 +00:00
obj-$(CONFIG_MFD_SYSCON) += syscon.o
mfd: palmas PMIC device support Kconfig Add the new palmas MFD to Kconfig and Makefile Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-15 06:48:57 +00:00
obj-$(CONFIG_MFD_LM3533) += lm3533-core.o lm3533-ctrlbank.o
mfd: vexpress: Define the device as MFD cells This patch - finally, after over 6 months! :-( - addresses Samuel's request to split the vexpress-sysreg driver into smaller portions and define the device in a form of MFD cells: * LEDs code has been completely removed and replaced with "gpio-leds" nodes in the tree (referencing dedicated GPIO subnodes in sysreg - bindings documentation updated); this also better fits the reality as some variants of the motherboard don't have all the LEDs populated * syscfg bridge code has been extracted into a separate driver (placed in drivers/misc for no better place) * all the ID & MISC registers are defined as sysconf making them available for other drivers should they need to use them (and also to the user via /sys/kernel/debug/regmap which can be helpful in platform debugging) Signed-off-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Lee Jones <lee.jones@linaro.org>
2014-04-23 09:49:31 +00:00
obj-$(CONFIG_MFD_VEXPRESS_SYSREG) += vexpress-sysreg.o
mfd: Introduce retu-mfd driver Retu is a multi-function device found on Nokia Internet Tablets implementing at least watchdog, RTC, headset detection and power button functionality. This patch implements minimum functionality providing register access, IRQ handling and power off functions. Acked-by: Felipe Balbi <balbi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-18 16:36:20 +00:00
obj-$(CONFIG_MFD_RETU) += retu-mfd.o
mfd: Add an AS3711 PMIC MFD driver AS3711 is a PMIC with multiple DCDC and LDO power supplies, GPIOs, an RTC, a battery charger and a general purpose ADC. This patch adds support for the MFD with support for a regulator driver and a backlight driver. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-22 10:12:04 +00:00
obj-$(CONFIG_MFD_AS3711) += as3711.o
mfd: Add support for ams AS3722 PMIC The ams AS3722 is a compact system PMU suitable for mobile phones, tablets etc. It has 4 DC/DC step-down regulators, 3 DC/DC step-down controller, 11 LDOs, RTC, automatic battery, temperature and over-current monitoring, 8 GPIOs, ADC and a watchdog. Add MFD core driver for the AS3722 to support core functionality. Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Florian Lobmaier <florian.lobmaier@ams.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-10-22 07:38:46 +00:00
obj-$(CONFIG_MFD_AS3722) += as3722.o
mfd: Add STw481x driver This adds a driver for the STw481x PMICs found in the Nomadik family of platforms. This one uses pure device tree probing. Print some of the OTP registers on boot and register a regulator MFD child. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-09-22 19:49:18 +00:00
obj-$(CONFIG_MFD_STW481X) += stw481x.o
mfd: Add driver for Atmel Microcontroller on iPaq h3xxx This adds a driver for the Atmel Microcontroller found on the iPAQ h3xxx series. This device handles some keys, the touchscreen, and the battery monitoring. This is a port of a driver from handhelds.org 2.6.21 kernel, written by Alessandro Gardich based on Andrew Christians original HAL-driver. It has been heavily cleaned and converted to mfd-core by Dmitry Artamonow and rewritten again for the v3.x series kernels by Linus Walleij, bringing back some of the functionality lost from Andrew's original driver. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Alessandro Gardich <gremlin@gremlin.it> Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-04-03 15:45:15 +00:00
obj-$(CONFIG_MFD_IPAQ_MICRO) += ipaq-micro.o
mfd: menf21bmc: Introduce MEN 14F021P00 BMC MFD Core driver The MEN 14F021P00 Board Management Controller provides an I2C interface to the host to access the feature implemented in the BMC. The BMC is a PIC Microntroller assembled on CPCI Card from MEN Mikroelektronik and on a few Box/Display Computer. Added MFD Core driver, supporting the I2C communication to the device. The MFD driver currently supports the following features: - Watchdog - LEDs - Hwmon (voltage monitoring) Signed-off-by: Andreas Werner <andreas.werner@men.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-08-27 17:51:45 +00:00
obj-$(CONFIG_MFD_MENF21BMC) += menf21bmc.o
mfd: Add HI6421 PMIC Core driver This adds driver to support HiSilicon Hi6421 PMIC. Hi6421 includes multi- functions, such as regulators, codec, ADCs, Coulomb counter, etc. This driver includes core APIs _only_. Drivers for individul components, like voltage regulators, are implemented in corresponding driver directories and files. Registers in Hi6421 are memory mapped, so using regmap-mmio API. Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-09-01 08:28:34 +00:00
obj-$(CONFIG_MFD_HI6421_PMIC) += hi6421-pmic-core.o
mfd: hi655x: Add MFD driver for hi655x Add PMIC MFD driver to support hisilicon hi665x. Signed-off-by: Chen Feng <puck.chen@hisilicon.com> Signed-off-by: Fei Wang <w.f@huawei.com> Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com> Reviewed-by: Haojian Zhuang <haojian.zhuang@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-02-14 06:29:21 +00:00
obj-$(CONFIG_MFD_HI655X_PMIC) += hi655x-pmic.o
mfd: Add support for Diolan DLN-2 devices This patch implements the USB part of the Diolan USB-I2C/SPI/GPIO Master Adapter DLN-2. Details about the device can be found here: https://www.diolan.com/i2c/i2c_interface.html. Information about the USB protocol can be found in the Programmer's Reference Manual [1], see section 1.7. Because the hardware has a single transmit endpoint and a single receive endpoint the communication between the various DLN2 drivers and the hardware will be muxed/demuxed by this driver. Each DLN2 module will be identified by the handle field within the DLN2 message header. If a DLN2 module issues multiple commands in parallel they will be identified by the echo counter field in the message header. The DLN2 modules can use the dln2_transfer() function to issue a command and wait for its response. They can also register a callback that is going to be called when a specific event id is generated by the device (e.g. GPIO interrupts). The device uses handle 0 for sending events. [1] https://www.diolan.com/downloads/dln-api-manual.pdf Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-06 13:48:03 +00:00
obj-$(CONFIG_MFD_DLN2) += dln2.o
mfd: rt5033: Add Richtek RT5033 driver core. This patch adds a new driver for Richtek RT5033 driver. RT5033 is a Multifunction device which includes battery charger, fuel gauge, flash LED current source, LDO and synchronous Buck converter. It is interfaced to host controller using I2C interface. Signed-off-by: Beomho Seo <beomho.seo@samsung.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-12-09 12:03:51 +00:00
obj-$(CONFIG_MFD_RT5033) += rt5033.o
mfd: Add support for Skyworks SKY81452 driver Signed-off-by: Gyungoh Yoo <jack.yoo@skyworksinc.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-27 06:42:21 +00:00
obj-$(CONFIG_MFD_SKY81452) += sky81452.o
mfd: intel_soc_pmic: Crystal Cove support This patch provides chip-specific support for Crystal Cove. Crystal Cove is the PMIC in Baytrail-T platform. Also adds Intel SoC PMIC support to the build files. Signed-off-by: Yang, Bin <bin.yang@intel.com> Signed-off-by: Zhu, Lejun <lejun.zhu@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-06-03 05:26:03 +00:00
intel-soc-pmic-objs := intel_soc_pmic_core.o intel_soc_pmic_crc.o
mfd: add Intel Broxton Whiskey Cove PMIC driver Add MFD core driver for Intel Broxton Whiskey Cove PMIC, which is specially accessed by hardware IPC, not a generic I2C device Signed-off-by: Qipeng Zha <qipeng.zha@intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-09-14 16:39:19 +00:00
intel-soc-pmic-$(CONFIG_INTEL_PMC_IPC) += intel_soc_pmic_bxtwc.o
mfd: intel_soc_pmic: Crystal Cove support This patch provides chip-specific support for Crystal Cove. Crystal Cove is the PMIC in Baytrail-T platform. Also adds Intel SoC PMIC support to the build files. Signed-off-by: Yang, Bin <bin.yang@intel.com> Signed-off-by: Zhu, Lejun <lejun.zhu@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-06-03 05:26:03 +00:00
obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o
mfd: Add support for the MediaTek MT6397 PMIC This adds support for the MediaTek MT6397 PMIC. This is a multifunction device with the following sub modules: - Regulator - RTC - Audio codec - GPIO - Clock It is interfaced to the host controller using SPI interface by a proprietary hardware called PMIC wrapper or pwrap. MT6397 MFD is a child device of the pwrap. Signed-off-by: Flora Fu, MediaTek Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-22 12:15:29 +00:00
obj-$(CONFIG_MFD_MT6397) += mt6397-core.o
mfd: altr_a10sr: Add Altera Arria10 DevKit System Resource Chip Add support for the Altera Arria10 Development Kit System Resource chip which is implemented using a MAX5 as a external gpio extender with the regmap framework over a SPI bus. Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-02 17:52:23 +00:00
obj-$(CONFIG_MFD_ALTERA_A10SR) += altera-a10sr.o
Reference in New Issue Copy Permalink