Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-12-23 19:31:53 +00:00
Code Issues Packages Projects Releases Wiki Activity
05a100e4ac
linux/drivers/pinctrl/meson/pinctrl-meson8b.c

958 lines
29 KiB
C
Raw Normal View History

pinctrl: Add support for Meson8b This patch adds support for the AmLogic Meson8b SoC. Signed-off-by: Carlo Caione <carlo@endlessm.com> Acked-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-29 10:56:42 +00:00
/*
* Pin controller and GPIO driver for Amlogic Meson8b.
*
* Copyright (C) 2015 Endless Mobile, Inc.
* Author: Carlo Caione <carlo@endlessm.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <dt-bindings/gpio/meson8b-gpio.h>
#include "pinctrl-meson.h"
pinctrl: meson: rework pinmux ops This change prepare the introduction of new meson SoC. This new SoC will share the same gpio/pinconf registers but the pinmux part will be different. While the format of the data associated with each pinmux group will change, the way to handle pinmuxing will be similar. To deal with this new situation, the meson_pmx_struture is kept but the data associated to it is now generic. This allows to reuse the basic functions which would otherwise be copy/pasted in each pinmux driver (such as getting the name a count of groups and functions) Only the functions actually using this specific data is taken out of the common code and is handling the SoC pinmuxing Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-12 12:40:26 +00:00
#include "pinctrl-meson8-pmx.h"
pinctrl: Add support for Meson8b This patch adds support for the AmLogic Meson8b SoC. Signed-off-by: Carlo Caione <carlo@endlessm.com> Acked-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-29 10:56:42 +00:00
pinctrl: amlogic: Make driver independent from two-domain configuration In the Amlogic Meson8 / Meson8b platforms we have two different buses: cbus and aobus, corresponding to 2 different power domains (regular and always-on). On each bus a different set of registers is mapped to manage muxes, GPIOs and in general to control a clear subset of the pins. Considering this architecture, having two different pinctrl devices, one for each bus / power domain, makes much more sense than just having one single device. Right now we have one single pin controller driver that uses two different domains (represented by 'gpio' and 'gpio-ao' sub-nodes in the DTS) to manage the set of registers on the two buses. This dual-domain configuration is hardcoded into the driver that strictly requires one domain for each bus in the same pin controller device. With this patch we refactor the driver to allow splitting the driver in two parts. This change is needed to have a proper description of the HW in the device-tree where we want to introduce aobus and cbus. Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-01 22:04:34 +00:00
static const struct pinctrl_pin_desc meson8b_cbus_pins[] = {
pinctrl: meson: remove offset from pinctrl Offset on meson pinctrl and gpios is something that was carried from the vendor driver, where there is a weird link between the 2 controllers. Since these 2 controllers are independent, this offset adds an unnecessary complexity. This patch remove this manually set offset and rely on pinctrl to figure out the gpio base offset Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-09-20 13:39:20 +00:00
MESON_PIN(GPIOX_0),
MESON_PIN(GPIOX_1),
MESON_PIN(GPIOX_2),
MESON_PIN(GPIOX_3),
MESON_PIN(GPIOX_4),
MESON_PIN(GPIOX_5),
MESON_PIN(GPIOX_6),
MESON_PIN(GPIOX_7),
MESON_PIN(GPIOX_8),
MESON_PIN(GPIOX_9),
MESON_PIN(GPIOX_10),
MESON_PIN(GPIOX_11),
MESON_PIN(GPIOX_16),
MESON_PIN(GPIOX_17),
MESON_PIN(GPIOX_18),
MESON_PIN(GPIOX_19),
MESON_PIN(GPIOX_20),
MESON_PIN(GPIOX_21),
MESON_PIN(GPIOY_0),
MESON_PIN(GPIOY_1),
MESON_PIN(GPIOY_3),
MESON_PIN(GPIOY_6),
MESON_PIN(GPIOY_7),
MESON_PIN(GPIOY_8),
MESON_PIN(GPIOY_9),
MESON_PIN(GPIOY_10),
MESON_PIN(GPIOY_11),
MESON_PIN(GPIOY_12),
MESON_PIN(GPIOY_13),
MESON_PIN(GPIOY_14),
MESON_PIN(GPIODV_9),
MESON_PIN(GPIODV_24),
MESON_PIN(GPIODV_25),
MESON_PIN(GPIODV_26),
MESON_PIN(GPIODV_27),
MESON_PIN(GPIODV_28),
MESON_PIN(GPIODV_29),
MESON_PIN(GPIOH_0),
MESON_PIN(GPIOH_1),
MESON_PIN(GPIOH_2),
MESON_PIN(GPIOH_3),
MESON_PIN(GPIOH_4),
MESON_PIN(GPIOH_5),
MESON_PIN(GPIOH_6),
MESON_PIN(GPIOH_7),
MESON_PIN(GPIOH_8),
MESON_PIN(GPIOH_9),
MESON_PIN(CARD_0),
MESON_PIN(CARD_1),
MESON_PIN(CARD_2),
MESON_PIN(CARD_3),
MESON_PIN(CARD_4),
MESON_PIN(CARD_5),
MESON_PIN(CARD_6),
MESON_PIN(BOOT_0),
MESON_PIN(BOOT_1),
MESON_PIN(BOOT_2),
MESON_PIN(BOOT_3),
MESON_PIN(BOOT_4),
MESON_PIN(BOOT_5),
MESON_PIN(BOOT_6),
MESON_PIN(BOOT_7),
MESON_PIN(BOOT_8),
MESON_PIN(BOOT_9),
MESON_PIN(BOOT_10),
MESON_PIN(BOOT_11),
MESON_PIN(BOOT_12),
MESON_PIN(BOOT_13),
MESON_PIN(BOOT_14),
MESON_PIN(BOOT_15),
MESON_PIN(BOOT_16),
MESON_PIN(BOOT_17),
MESON_PIN(BOOT_18),
MESON_PIN(DIF_0_P),
MESON_PIN(DIF_0_N),
MESON_PIN(DIF_1_P),
MESON_PIN(DIF_1_N),
MESON_PIN(DIF_2_P),
MESON_PIN(DIF_2_N),
MESON_PIN(DIF_3_P),
MESON_PIN(DIF_3_N),
MESON_PIN(DIF_4_P),
MESON_PIN(DIF_4_N),
pinctrl: amlogic: Make driver independent from two-domain configuration In the Amlogic Meson8 / Meson8b platforms we have two different buses: cbus and aobus, corresponding to 2 different power domains (regular and always-on). On each bus a different set of registers is mapped to manage muxes, GPIOs and in general to control a clear subset of the pins. Considering this architecture, having two different pinctrl devices, one for each bus / power domain, makes much more sense than just having one single device. Right now we have one single pin controller driver that uses two different domains (represented by 'gpio' and 'gpio-ao' sub-nodes in the DTS) to manage the set of registers on the two buses. This dual-domain configuration is hardcoded into the driver that strictly requires one domain for each bus in the same pin controller device. With this patch we refactor the driver to allow splitting the driver in two parts. This change is needed to have a proper description of the HW in the device-tree where we want to introduce aobus and cbus. Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-01 22:04:34 +00:00
};
pinctrl: Add support for Meson8b This patch adds support for the AmLogic Meson8b SoC. Signed-off-by: Carlo Caione <carlo@endlessm.com> Acked-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-29 10:56:42 +00:00
pinctrl: amlogic: Make driver independent from two-domain configuration In the Amlogic Meson8 / Meson8b platforms we have two different buses: cbus and aobus, corresponding to 2 different power domains (regular and always-on). On each bus a different set of registers is mapped to manage muxes, GPIOs and in general to control a clear subset of the pins. Considering this architecture, having two different pinctrl devices, one for each bus / power domain, makes much more sense than just having one single device. Right now we have one single pin controller driver that uses two different domains (represented by 'gpio' and 'gpio-ao' sub-nodes in the DTS) to manage the set of registers on the two buses. This dual-domain configuration is hardcoded into the driver that strictly requires one domain for each bus in the same pin controller device. With this patch we refactor the driver to allow splitting the driver in two parts. This change is needed to have a proper description of the HW in the device-tree where we want to introduce aobus and cbus. Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-01 22:04:34 +00:00
static const struct pinctrl_pin_desc meson8b_aobus_pins[] = {
pinctrl: meson: remove offset from pinctrl Offset on meson pinctrl and gpios is something that was carried from the vendor driver, where there is a weird link between the 2 controllers. Since these 2 controllers are independent, this offset adds an unnecessary complexity. This patch remove this manually set offset and rely on pinctrl to figure out the gpio base offset Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-09-20 13:39:20 +00:00
MESON_PIN(GPIOAO_0),
MESON_PIN(GPIOAO_1),
MESON_PIN(GPIOAO_2),
MESON_PIN(GPIOAO_3),
MESON_PIN(GPIOAO_4),
MESON_PIN(GPIOAO_5),
MESON_PIN(GPIOAO_6),
MESON_PIN(GPIOAO_7),
MESON_PIN(GPIOAO_8),
MESON_PIN(GPIOAO_9),
MESON_PIN(GPIOAO_10),
MESON_PIN(GPIOAO_11),
MESON_PIN(GPIOAO_12),
MESON_PIN(GPIOAO_13),
pinctrl: meson: add interrupts to pinctrl data Add GPIO interrupt information to pinctrl data. Added to the original version from Jerome was data for Meson GXL. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-08 19:37:50 +00:00
/*
* The following 2 pins are not mentionned in the public datasheet
* According to this datasheet, they can't be used with the gpio
* interrupt controller
*/
pinctrl: meson: remove offset from pinctrl Offset on meson pinctrl and gpios is something that was carried from the vendor driver, where there is a weird link between the 2 controllers. Since these 2 controllers are independent, this offset adds an unnecessary complexity. This patch remove this manually set offset and rely on pinctrl to figure out the gpio base offset Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-09-20 13:39:20 +00:00
MESON_PIN(GPIO_BSD_EN),
MESON_PIN(GPIO_TEST_N),
pinctrl: Add support for Meson8b This patch adds support for the AmLogic Meson8b SoC. Signed-off-by: Carlo Caione <carlo@endlessm.com> Acked-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-29 10:56:42 +00:00
};
/* bank X */
pinctrl: meson: remove offset from pinctrl Offset on meson pinctrl and gpios is something that was carried from the vendor driver, where there is a weird link between the 2 controllers. Since these 2 controllers are independent, this offset adds an unnecessary complexity. This patch remove this manually set offset and rely on pinctrl to figure out the gpio base offset Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-09-20 13:39:20 +00:00
static const unsigned int sd_d0_a_pins[] = { GPIOX_0 };
static const unsigned int sd_d1_a_pins[] = { GPIOX_1 };
static const unsigned int sd_d2_a_pins[] = { GPIOX_2 };
static const unsigned int sd_d3_a_pins[] = { GPIOX_3 };
static const unsigned int sdxc_d0_0_a_pins[] = { GPIOX_4 };
static const unsigned int sdxc_d47_a_pins[] = { GPIOX_4, GPIOX_5,
GPIOX_6, GPIOX_7 };
static const unsigned int sdxc_d13_0_a_pins[] = { GPIOX_5, GPIOX_6,
GPIOX_7 };
static const unsigned int sd_clk_a_pins[] = { GPIOX_8 };
static const unsigned int sd_cmd_a_pins[] = { GPIOX_9 };
static const unsigned int xtal_32k_out_pins[] = { GPIOX_10 };
static const unsigned int xtal_24m_out_pins[] = { GPIOX_11 };
static const unsigned int uart_tx_b0_pins[] = { GPIOX_16 };
static const unsigned int uart_rx_b0_pins[] = { GPIOX_17 };
static const unsigned int uart_cts_b0_pins[] = { GPIOX_18 };
static const unsigned int uart_rts_b0_pins[] = { GPIOX_19 };
static const unsigned int sdxc_d0_1_a_pins[] = { GPIOX_0 };
static const unsigned int sdxc_d13_1_a_pins[] = { GPIOX_1, GPIOX_2,
GPIOX_3 };
static const unsigned int pcm_out_a_pins[] = { GPIOX_4 };
static const unsigned int pcm_in_a_pins[] = { GPIOX_5 };
static const unsigned int pcm_fs_a_pins[] = { GPIOX_6 };
static const unsigned int pcm_clk_a_pins[] = { GPIOX_7 };
static const unsigned int sdxc_clk_a_pins[] = { GPIOX_8 };
static const unsigned int sdxc_cmd_a_pins[] = { GPIOX_9 };
static const unsigned int pwm_vs_0_pins[] = { GPIOX_10 };
static const unsigned int pwm_e_pins[] = { GPIOX_10 };
static const unsigned int pwm_vs_1_pins[] = { GPIOX_11 };
static const unsigned int uart_tx_a_pins[] = { GPIOX_4 };
static const unsigned int uart_rx_a_pins[] = { GPIOX_5 };
static const unsigned int uart_cts_a_pins[] = { GPIOX_6 };
static const unsigned int uart_rts_a_pins[] = { GPIOX_7 };
static const unsigned int uart_tx_b1_pins[] = { GPIOX_8 };
static const unsigned int uart_rx_b1_pins[] = { GPIOX_9 };
static const unsigned int uart_cts_b1_pins[] = { GPIOX_10 };
static const unsigned int uart_rts_b1_pins[] = { GPIOX_20 };
static const unsigned int iso7816_0_clk_pins[] = { GPIOX_6 };
static const unsigned int iso7816_0_data_pins[] = { GPIOX_7 };
static const unsigned int spi_sclk_0_pins[] = { GPIOX_8 };
static const unsigned int spi_miso_0_pins[] = { GPIOX_9 };
static const unsigned int spi_mosi_0_pins[] = { GPIOX_10 };
static const unsigned int iso7816_det_pins[] = { GPIOX_16 };
static const unsigned int iso7816_reset_pins[] = { GPIOX_17 };
static const unsigned int iso7816_1_clk_pins[] = { GPIOX_18 };
static const unsigned int iso7816_1_data_pins[] = { GPIOX_19 };
static const unsigned int spi_ss0_0_pins[] = { GPIOX_20 };
static const unsigned int tsin_clk_b_pins[] = { GPIOX_8 };
static const unsigned int tsin_sop_b_pins[] = { GPIOX_9 };
static const unsigned int tsin_d0_b_pins[] = { GPIOX_10 };
static const unsigned int pwm_b_pins[] = { GPIOX_11 };
static const unsigned int i2c_sda_d0_pins[] = { GPIOX_16 };
static const unsigned int i2c_sck_d0_pins[] = { GPIOX_17 };
static const unsigned int tsin_d_valid_b_pins[] = { GPIOX_20 };
pinctrl: Add support for Meson8b This patch adds support for the AmLogic Meson8b SoC. Signed-off-by: Carlo Caione <carlo@endlessm.com> Acked-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-29 10:56:42 +00:00
/* bank Y */
pinctrl: meson: remove offset from pinctrl Offset on meson pinctrl and gpios is something that was carried from the vendor driver, where there is a weird link between the 2 controllers. Since these 2 controllers are independent, this offset adds an unnecessary complexity. This patch remove this manually set offset and rely on pinctrl to figure out the gpio base offset Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-09-20 13:39:20 +00:00
static const unsigned int tsin_d_valid_a_pins[] = { GPIOY_0 };
static const unsigned int tsin_sop_a_pins[] = { GPIOY_1 };
static const unsigned int tsin_d17_a_pins[] = {
GPIOY_6, GPIOY_7, GPIOY_10, GPIOY_11, GPIOY_12, GPIOY_13, GPIOY_14,
};
static const unsigned int tsin_clk_a_pins[] = { GPIOY_8 };
static const unsigned int tsin_d0_a_pins[] = { GPIOY_9 };
pinctrl: Add support for Meson8b This patch adds support for the AmLogic Meson8b SoC. Signed-off-by: Carlo Caione <carlo@endlessm.com> Acked-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-29 10:56:42 +00:00
pinctrl: meson: remove offset from pinctrl Offset on meson pinctrl and gpios is something that was carried from the vendor driver, where there is a weird link between the 2 controllers. Since these 2 controllers are independent, this offset adds an unnecessary complexity. This patch remove this manually set offset and rely on pinctrl to figure out the gpio base offset Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-09-20 13:39:20 +00:00
static const unsigned int spdif_out_0_pins[] = { GPIOY_3 };
pinctrl: Add support for Meson8b This patch adds support for the AmLogic Meson8b SoC. Signed-off-by: Carlo Caione <carlo@endlessm.com> Acked-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-29 10:56:42 +00:00
pinctrl: meson: remove offset from pinctrl Offset on meson pinctrl and gpios is something that was carried from the vendor driver, where there is a weird link between the 2 controllers. Since these 2 controllers are independent, this offset adds an unnecessary complexity. This patch remove this manually set offset and rely on pinctrl to figure out the gpio base offset Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-09-20 13:39:20 +00:00
static const unsigned int xtal_24m_pins[] = { GPIOY_3 };
static const unsigned int iso7816_2_clk_pins[] = { GPIOY_13 };
static const unsigned int iso7816_2_data_pins[] = { GPIOY_14 };
pinctrl: Add support for Meson8b This patch adds support for the AmLogic Meson8b SoC. Signed-off-by: Carlo Caione <carlo@endlessm.com> Acked-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-29 10:56:42 +00:00
/* bank DV */
pinctrl: meson: remove offset from pinctrl Offset on meson pinctrl and gpios is something that was carried from the vendor driver, where there is a weird link between the 2 controllers. Since these 2 controllers are independent, this offset adds an unnecessary complexity. This patch remove this manually set offset and rely on pinctrl to figure out the gpio base offset Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-09-20 13:39:20 +00:00
static const unsigned int pwm_d_pins[] = { GPIODV_28 };
static const unsigned int pwm_c0_pins[] = { GPIODV_29 };
pinctrl: Add support for Meson8b This patch adds support for the AmLogic Meson8b SoC. Signed-off-by: Carlo Caione <carlo@endlessm.com> Acked-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-29 10:56:42 +00:00
pinctrl: meson: remove offset from pinctrl Offset on meson pinctrl and gpios is something that was carried from the vendor driver, where there is a weird link between the 2 controllers. Since these 2 controllers are independent, this offset adds an unnecessary complexity. This patch remove this manually set offset and rely on pinctrl to figure out the gpio base offset Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-09-20 13:39:20 +00:00
static const unsigned int pwm_vs_2_pins[] = { GPIODV_9 };
static const unsigned int pwm_vs_3_pins[] = { GPIODV_28 };
static const unsigned int pwm_vs_4_pins[] = { GPIODV_29 };
pinctrl: Add support for Meson8b This patch adds support for the AmLogic Meson8b SoC. Signed-off-by: Carlo Caione <carlo@endlessm.com> Acked-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-29 10:56:42 +00:00
pinctrl: meson: remove offset from pinctrl Offset on meson pinctrl and gpios is something that was carried from the vendor driver, where there is a weird link between the 2 controllers. Since these 2 controllers are independent, this offset adds an unnecessary complexity. This patch remove this manually set offset and rely on pinctrl to figure out the gpio base offset Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-09-20 13:39:20 +00:00
static const unsigned int xtal24_out_pins[] = { GPIODV_29 };
pinctrl: Add support for Meson8b This patch adds support for the AmLogic Meson8b SoC. Signed-off-by: Carlo Caione <carlo@endlessm.com> Acked-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-29 10:56:42 +00:00
pinctrl: meson: remove offset from pinctrl Offset on meson pinctrl and gpios is something that was carried from the vendor driver, where there is a weird link between the 2 controllers. Since these 2 controllers are independent, this offset adds an unnecessary complexity. This patch remove this manually set offset and rely on pinctrl to figure out the gpio base offset Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-09-20 13:39:20 +00:00
static const unsigned int uart_tx_c_pins[] = { GPIODV_24 };
static const unsigned int uart_rx_c_pins[] = { GPIODV_25 };
static const unsigned int uart_cts_c_pins[] = { GPIODV_26 };
static const unsigned int uart_rts_c_pins[] = { GPIODV_27 };
pinctrl: Add support for Meson8b This patch adds support for the AmLogic Meson8b SoC. Signed-off-by: Carlo Caione <carlo@endlessm.com> Acked-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-29 10:56:42 +00:00
pinctrl: meson: remove offset from pinctrl Offset on meson pinctrl and gpios is something that was carried from the vendor driver, where there is a weird link between the 2 controllers. Since these 2 controllers are independent, this offset adds an unnecessary complexity. This patch remove this manually set offset and rely on pinctrl to figure out the gpio base offset Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-09-20 13:39:20 +00:00
static const unsigned int pwm_c1_pins[] = { GPIODV_9 };
pinctrl: Add support for Meson8b This patch adds support for the AmLogic Meson8b SoC. Signed-off-by: Carlo Caione <carlo@endlessm.com> Acked-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-29 10:56:42 +00:00
pinctrl: meson: remove offset from pinctrl Offset on meson pinctrl and gpios is something that was carried from the vendor driver, where there is a weird link between the 2 controllers. Since these 2 controllers are independent, this offset adds an unnecessary complexity. This patch remove this manually set offset and rely on pinctrl to figure out the gpio base offset Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-09-20 13:39:20 +00:00
static const unsigned int i2c_sda_a_pins[] = { GPIODV_24 };
static const unsigned int i2c_sck_a_pins[] = { GPIODV_25 };
static const unsigned int i2c_sda_b0_pins[] = { GPIODV_26 };
static const unsigned int i2c_sck_b0_pins[] = { GPIODV_27 };
static const unsigned int i2c_sda_c0_pins[] = { GPIODV_28 };
static const unsigned int i2c_sck_c0_pins[] = { GPIODV_29 };
pinctrl: Add support for Meson8b This patch adds support for the AmLogic Meson8b SoC. Signed-off-by: Carlo Caione <carlo@endlessm.com> Acked-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-29 10:56:42 +00:00
/* bank H */
pinctrl: meson: remove offset from pinctrl Offset on meson pinctrl and gpios is something that was carried from the vendor driver, where there is a weird link between the 2 controllers. Since these 2 controllers are independent, this offset adds an unnecessary complexity. This patch remove this manually set offset and rely on pinctrl to figure out the gpio base offset Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-09-20 13:39:20 +00:00
static const unsigned int hdmi_hpd_pins[] = { GPIOH_0 };
static const unsigned int hdmi_sda_pins[] = { GPIOH_1 };
static const unsigned int hdmi_scl_pins[] = { GPIOH_2 };
static const unsigned int hdmi_cec_0_pins[] = { GPIOH_3 };
static const unsigned int eth_txd1_0_pins[] = { GPIOH_5 };
static const unsigned int eth_txd0_0_pins[] = { GPIOH_6 };
static const unsigned int clk_24m_out_pins[] = { GPIOH_9 };
static const unsigned int spi_ss1_pins[] = { GPIOH_0 };
static const unsigned int spi_ss2_pins[] = { GPIOH_1 };
static const unsigned int spi_ss0_1_pins[] = { GPIOH_3 };
static const unsigned int spi_miso_1_pins[] = { GPIOH_4 };
static const unsigned int spi_mosi_1_pins[] = { GPIOH_5 };
static const unsigned int spi_sclk_1_pins[] = { GPIOH_6 };
static const unsigned int eth_txd3_pins[] = { GPIOH_7 };
static const unsigned int eth_txd2_pins[] = { GPIOH_8 };
static const unsigned int eth_tx_clk_pins[] = { GPIOH_9 };
static const unsigned int i2c_sda_b1_pins[] = { GPIOH_3 };
static const unsigned int i2c_sck_b1_pins[] = { GPIOH_4 };
static const unsigned int i2c_sda_c1_pins[] = { GPIOH_5 };
static const unsigned int i2c_sck_c1_pins[] = { GPIOH_6 };
static const unsigned int i2c_sda_d1_pins[] = { GPIOH_7 };
static const unsigned int i2c_sck_d1_pins[] = { GPIOH_8 };
pinctrl: Add support for Meson8b This patch adds support for the AmLogic Meson8b SoC. Signed-off-by: Carlo Caione <carlo@endlessm.com> Acked-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-29 10:56:42 +00:00
/* bank BOOT */
pinctrl: meson: remove offset from pinctrl Offset on meson pinctrl and gpios is something that was carried from the vendor driver, where there is a weird link between the 2 controllers. Since these 2 controllers are independent, this offset adds an unnecessary complexity. This patch remove this manually set offset and rely on pinctrl to figure out the gpio base offset Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-09-20 13:39:20 +00:00
static const unsigned int nand_io_pins[] = {
BOOT_0, BOOT_1, BOOT_2, BOOT_3, BOOT_4, BOOT_5, BOOT_6, BOOT_7
};
static const unsigned int nand_io_ce0_pins[] = { BOOT_8 };
static const unsigned int nand_io_ce1_pins[] = { BOOT_9 };
static const unsigned int nand_io_rb0_pins[] = { BOOT_10 };
static const unsigned int nand_ale_pins[] = { BOOT_11 };
static const unsigned int nand_cle_pins[] = { BOOT_12 };
static const unsigned int nand_wen_clk_pins[] = { BOOT_13 };
static const unsigned int nand_ren_clk_pins[] = { BOOT_14 };
static const unsigned int nand_dqs_15_pins[] = { BOOT_15 };
static const unsigned int nand_dqs_18_pins[] = { BOOT_18 };
static const unsigned int sdxc_d0_c_pins[] = { BOOT_0};
static const unsigned int sdxc_d13_c_pins[] = { BOOT_1, BOOT_2,
BOOT_3 };
static const unsigned int sdxc_d47_c_pins[] = { BOOT_4, BOOT_5,
BOOT_6, BOOT_7 };
static const unsigned int sdxc_clk_c_pins[] = { BOOT_8 };
static const unsigned int sdxc_cmd_c_pins[] = { BOOT_10 };
static const unsigned int nor_d_pins[] = { BOOT_11 };
static const unsigned int nor_q_pins[] = { BOOT_12 };
static const unsigned int nor_c_pins[] = { BOOT_13 };
static const unsigned int nor_cs_pins[] = { BOOT_18 };
static const unsigned int sd_d0_c_pins[] = { BOOT_0 };
static const unsigned int sd_d1_c_pins[] = { BOOT_1 };
static const unsigned int sd_d2_c_pins[] = { BOOT_2 };
static const unsigned int sd_d3_c_pins[] = { BOOT_3 };
static const unsigned int sd_cmd_c_pins[] = { BOOT_8 };
static const unsigned int sd_clk_c_pins[] = { BOOT_10 };
pinctrl: Add support for Meson8b This patch adds support for the AmLogic Meson8b SoC. Signed-off-by: Carlo Caione <carlo@endlessm.com> Acked-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-29 10:56:42 +00:00
/* bank CARD */
pinctrl: meson: remove offset from pinctrl Offset on meson pinctrl and gpios is something that was carried from the vendor driver, where there is a weird link between the 2 controllers. Since these 2 controllers are independent, this offset adds an unnecessary complexity. This patch remove this manually set offset and rely on pinctrl to figure out the gpio base offset Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-09-20 13:39:20 +00:00
static const unsigned int sd_d1_b_pins[] = { CARD_0 };
static const unsigned int sd_d0_b_pins[] = { CARD_1 };
static const unsigned int sd_clk_b_pins[] = { CARD_2 };
static const unsigned int sd_cmd_b_pins[] = { CARD_3 };
static const unsigned int sd_d3_b_pins[] = { CARD_4 };
static const unsigned int sd_d2_b_pins[] = { CARD_5 };
static const unsigned int sdxc_d13_b_pins[] = { CARD_0, CARD_4,
CARD_5 };
static const unsigned int sdxc_d0_b_pins[] = { CARD_1 };
static const unsigned int sdxc_clk_b_pins[] = { CARD_2 };
static const unsigned int sdxc_cmd_b_pins[] = { CARD_3 };
pinctrl: Add support for Meson8b This patch adds support for the AmLogic Meson8b SoC. Signed-off-by: Carlo Caione <carlo@endlessm.com> Acked-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-29 10:56:42 +00:00
/* bank AO */
pinctrl: meson: remove offset from pinctrl Offset on meson pinctrl and gpios is something that was carried from the vendor driver, where there is a weird link between the 2 controllers. Since these 2 controllers are independent, this offset adds an unnecessary complexity. This patch remove this manually set offset and rely on pinctrl to figure out the gpio base offset Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-09-20 13:39:20 +00:00
static const unsigned int uart_tx_ao_a_pins[] = { GPIOAO_0 };
static const unsigned int uart_rx_ao_a_pins[] = { GPIOAO_1 };
static const unsigned int uart_cts_ao_a_pins[] = { GPIOAO_2 };
static const unsigned int uart_rts_ao_a_pins[] = { GPIOAO_3 };
static const unsigned int i2c_mst_sck_ao_pins[] = { GPIOAO_4 };
static const unsigned int i2c_mst_sda_ao_pins[] = { GPIOAO_5 };
static const unsigned int clk_32k_in_out_pins[] = { GPIOAO_6 };
static const unsigned int remote_input_pins[] = { GPIOAO_7 };
static const unsigned int hdmi_cec_1_pins[] = { GPIOAO_12 };
static const unsigned int ir_blaster_pins[] = { GPIOAO_13 };
static const unsigned int pwm_c2_pins[] = { GPIOAO_3 };
static const unsigned int i2c_sck_ao_pins[] = { GPIOAO_4 };
static const unsigned int i2c_sda_ao_pins[] = { GPIOAO_5 };
static const unsigned int ir_remote_out_pins[] = { GPIOAO_7 };
static const unsigned int i2s_am_clk_out_pins[] = { GPIOAO_8 };
static const unsigned int i2s_ao_clk_out_pins[] = { GPIOAO_9 };
static const unsigned int i2s_lr_clk_out_pins[] = { GPIOAO_10 };
static const unsigned int i2s_out_01_pins[] = { GPIOAO_11 };
static const unsigned int uart_tx_ao_b0_pins[] = { GPIOAO_0 };
static const unsigned int uart_rx_ao_b0_pins[] = { GPIOAO_1 };
static const unsigned int uart_cts_ao_b_pins[] = { GPIOAO_2 };
static const unsigned int uart_rts_ao_b_pins[] = { GPIOAO_3 };
static const unsigned int uart_tx_ao_b1_pins[] = { GPIOAO_4 };
static const unsigned int uart_rx_ao_b1_pins[] = { GPIOAO_5 };
static const unsigned int spdif_out_1_pins[] = { GPIOAO_6 };
static const unsigned int i2s_in_ch01_pins[] = { GPIOAO_6 };
static const unsigned int i2s_ao_clk_in_pins[] = { GPIOAO_9 };
static const unsigned int i2s_lr_clk_in_pins[] = { GPIOAO_10 };
pinctrl: Add support for Meson8b This patch adds support for the AmLogic Meson8b SoC. Signed-off-by: Carlo Caione <carlo@endlessm.com> Acked-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-29 10:56:42 +00:00
/* bank DIF */
pinctrl: meson: remove offset from pinctrl Offset on meson pinctrl and gpios is something that was carried from the vendor driver, where there is a weird link between the 2 controllers. Since these 2 controllers are independent, this offset adds an unnecessary complexity. This patch remove this manually set offset and rely on pinctrl to figure out the gpio base offset Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-09-20 13:39:20 +00:00
static const unsigned int eth_rxd1_pins[] = { DIF_0_P };
static const unsigned int eth_rxd0_pins[] = { DIF_0_N };
static const unsigned int eth_rx_dv_pins[] = { DIF_1_P };
static const unsigned int eth_rx_clk_pins[] = { DIF_1_N };
static const unsigned int eth_txd0_1_pins[] = { DIF_2_P };
static const unsigned int eth_txd1_1_pins[] = { DIF_2_N };
static const unsigned int eth_tx_en_pins[] = { DIF_3_P };
static const unsigned int eth_ref_clk_pins[] = { DIF_3_N };
static const unsigned int eth_mdc_pins[] = { DIF_4_P };
static const unsigned int eth_mdio_en_pins[] = { DIF_4_N };
pinctrl: Add support for Meson8b This patch adds support for the AmLogic Meson8b SoC. Signed-off-by: Carlo Caione <carlo@endlessm.com> Acked-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-29 10:56:42 +00:00
pinctrl: amlogic: Make driver independent from two-domain configuration In the Amlogic Meson8 / Meson8b platforms we have two different buses: cbus and aobus, corresponding to 2 different power domains (regular and always-on). On each bus a different set of registers is mapped to manage muxes, GPIOs and in general to control a clear subset of the pins. Considering this architecture, having two different pinctrl devices, one for each bus / power domain, makes much more sense than just having one single device. Right now we have one single pin controller driver that uses two different domains (represented by 'gpio' and 'gpio-ao' sub-nodes in the DTS) to manage the set of registers on the two buses. This dual-domain configuration is hardcoded into the driver that strictly requires one domain for each bus in the same pin controller device. With this patch we refactor the driver to allow splitting the driver in two parts. This change is needed to have a proper description of the HW in the device-tree where we want to introduce aobus and cbus. Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-01 22:04:34 +00:00
static struct meson_pmx_group meson8b_cbus_groups[] = {
pinctrl: meson: remove offset from pinctrl Offset on meson pinctrl and gpios is something that was carried from the vendor driver, where there is a weird link between the 2 controllers. Since these 2 controllers are independent, this offset adds an unnecessary complexity. This patch remove this manually set offset and rely on pinctrl to figure out the gpio base offset Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-09-20 13:39:20 +00:00
GPIO_GROUP(GPIOX_0),
GPIO_GROUP(GPIOX_1),
GPIO_GROUP(GPIOX_2),
GPIO_GROUP(GPIOX_3),
GPIO_GROUP(GPIOX_4),
GPIO_GROUP(GPIOX_5),
GPIO_GROUP(GPIOX_6),
GPIO_GROUP(GPIOX_7),
GPIO_GROUP(GPIOX_8),
GPIO_GROUP(GPIOX_9),
GPIO_GROUP(GPIOX_10),
GPIO_GROUP(GPIOX_11),
GPIO_GROUP(GPIOX_16),
GPIO_GROUP(GPIOX_17),
GPIO_GROUP(GPIOX_18),
GPIO_GROUP(GPIOX_19),
GPIO_GROUP(GPIOX_20),
GPIO_GROUP(GPIOX_21),
GPIO_GROUP(GPIOY_0),
GPIO_GROUP(GPIOY_1),
GPIO_GROUP(GPIOY_3),
GPIO_GROUP(GPIOY_6),
GPIO_GROUP(GPIOY_7),
GPIO_GROUP(GPIOY_8),
GPIO_GROUP(GPIOY_9),
GPIO_GROUP(GPIOY_10),
GPIO_GROUP(GPIOY_11),
GPIO_GROUP(GPIOY_12),
GPIO_GROUP(GPIOY_13),
GPIO_GROUP(GPIOY_14),
GPIO_GROUP(GPIODV_9),
GPIO_GROUP(GPIODV_24),
GPIO_GROUP(GPIODV_25),
GPIO_GROUP(GPIODV_26),
GPIO_GROUP(GPIODV_27),
GPIO_GROUP(GPIODV_28),
GPIO_GROUP(GPIODV_29),
GPIO_GROUP(GPIOH_0),
GPIO_GROUP(GPIOH_1),
GPIO_GROUP(GPIOH_2),
GPIO_GROUP(GPIOH_3),
GPIO_GROUP(GPIOH_4),
GPIO_GROUP(GPIOH_5),
GPIO_GROUP(GPIOH_6),
GPIO_GROUP(GPIOH_7),
GPIO_GROUP(GPIOH_8),
GPIO_GROUP(GPIOH_9),
GPIO_GROUP(DIF_0_P),
GPIO_GROUP(DIF_0_N),
GPIO_GROUP(DIF_1_P),
GPIO_GROUP(DIF_1_N),
GPIO_GROUP(DIF_2_P),
GPIO_GROUP(DIF_2_N),
GPIO_GROUP(DIF_3_P),
GPIO_GROUP(DIF_3_N),
GPIO_GROUP(DIF_4_P),
GPIO_GROUP(DIF_4_N),
pinctrl: Add support for Meson8b This patch adds support for the AmLogic Meson8b SoC. Signed-off-by: Carlo Caione <carlo@endlessm.com> Acked-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-29 10:56:42 +00:00
/* bank X */
GROUP(sd_d0_a, 8, 5),
GROUP(sd_d1_a, 8, 4),
GROUP(sd_d2_a, 8, 3),
GROUP(sd_d3_a, 8, 2),
GROUP(sdxc_d0_0_a, 5, 29),
GROUP(sdxc_d47_a, 5, 12),
GROUP(sdxc_d13_0_a, 5, 28),
GROUP(sd_clk_a, 8, 1),
GROUP(sd_cmd_a, 8, 0),
GROUP(xtal_32k_out, 3, 22),
GROUP(xtal_24m_out, 3, 20),
GROUP(uart_tx_b0, 4, 9),
GROUP(uart_rx_b0, 4, 8),
GROUP(uart_cts_b0, 4, 7),
GROUP(uart_rts_b0, 4, 6),
GROUP(sdxc_d0_1_a, 5, 14),
GROUP(sdxc_d13_1_a, 5, 13),
GROUP(pcm_out_a, 3, 30),
GROUP(pcm_in_a, 3, 29),
GROUP(pcm_fs_a, 3, 28),
GROUP(pcm_clk_a, 3, 27),
GROUP(sdxc_clk_a, 5, 11),
GROUP(sdxc_cmd_a, 5, 10),
GROUP(pwm_vs_0, 7, 31),
GROUP(pwm_e, 9, 19),
GROUP(pwm_vs_1, 7, 30),
GROUP(uart_tx_a, 4, 17),
GROUP(uart_rx_a, 4, 16),
GROUP(uart_cts_a, 4, 15),
GROUP(uart_rts_a, 4, 14),
GROUP(uart_tx_b1, 6, 19),
GROUP(uart_rx_b1, 6, 18),
GROUP(uart_cts_b1, 6, 17),
GROUP(uart_rts_b1, 6, 16),
GROUP(iso7816_0_clk, 5, 9),
GROUP(iso7816_0_data, 5, 8),
GROUP(spi_sclk_0, 4, 22),
GROUP(spi_miso_0, 4, 24),
GROUP(spi_mosi_0, 4, 23),
GROUP(iso7816_det, 4, 21),
GROUP(iso7816_reset, 4, 20),
GROUP(iso7816_1_clk, 4, 19),
GROUP(iso7816_1_data, 4, 18),
GROUP(spi_ss0_0, 4, 25),
GROUP(tsin_clk_b, 3, 6),
GROUP(tsin_sop_b, 3, 7),
GROUP(tsin_d0_b, 3, 8),
GROUP(pwm_b, 2, 3),
GROUP(i2c_sda_d0, 4, 5),
GROUP(i2c_sck_d0, 4, 4),
GROUP(tsin_d_valid_b, 3, 9),
/* bank Y */
GROUP(tsin_d_valid_a, 3, 2),
GROUP(tsin_sop_a, 3, 1),
GROUP(tsin_d17_a, 3, 5),
GROUP(tsin_clk_a, 3, 0),
GROUP(tsin_d0_a, 3, 4),
GROUP(spdif_out_0, 1, 7),
GROUP(xtal_24m, 3, 18),
GROUP(iso7816_2_clk, 5, 7),
GROUP(iso7816_2_data, 5, 6),
/* bank DV */
GROUP(pwm_d, 3, 26),
GROUP(pwm_c0, 3, 25),
GROUP(pwm_vs_2, 7, 28),
GROUP(pwm_vs_3, 7, 27),
GROUP(pwm_vs_4, 7, 26),
GROUP(xtal24_out, 7, 25),
GROUP(uart_tx_c, 6, 23),
GROUP(uart_rx_c, 6, 22),
GROUP(uart_cts_c, 6, 21),
GROUP(uart_rts_c, 6, 20),
GROUP(pwm_c1, 3, 24),
GROUP(i2c_sda_a, 9, 31),
GROUP(i2c_sck_a, 9, 30),
GROUP(i2c_sda_b0, 9, 29),
GROUP(i2c_sck_b0, 9, 28),
GROUP(i2c_sda_c0, 9, 27),
GROUP(i2c_sck_c0, 9, 26),
/* bank H */
GROUP(hdmi_hpd, 1, 26),
GROUP(hdmi_sda, 1, 25),
GROUP(hdmi_scl, 1, 24),
GROUP(hdmi_cec_0, 1, 23),
GROUP(eth_txd1_0, 7, 21),
GROUP(eth_txd0_0, 7, 20),
GROUP(clk_24m_out, 4, 1),
GROUP(spi_ss1, 8, 11),
GROUP(spi_ss2, 8, 12),
GROUP(spi_ss0_1, 9, 13),
GROUP(spi_miso_1, 9, 12),
GROUP(spi_mosi_1, 9, 11),
GROUP(spi_sclk_1, 9, 10),
GROUP(eth_txd3, 6, 13),
GROUP(eth_txd2, 6, 12),
GROUP(eth_tx_clk, 6, 11),
GROUP(i2c_sda_b1, 5, 27),
GROUP(i2c_sck_b1, 5, 26),
GROUP(i2c_sda_c1, 5, 25),
GROUP(i2c_sck_c1, 5, 24),
GROUP(i2c_sda_d1, 4, 3),
GROUP(i2c_sck_d1, 4, 2),
/* bank BOOT */
GROUP(nand_io, 2, 26),
GROUP(nand_io_ce0, 2, 25),
GROUP(nand_io_ce1, 2, 24),
GROUP(nand_io_rb0, 2, 17),
GROUP(nand_ale, 2, 21),
GROUP(nand_cle, 2, 20),
GROUP(nand_wen_clk, 2, 19),
GROUP(nand_ren_clk, 2, 18),
pinctrl: meson: meson8b: rename the NAND DQS pin definitions The NAND DQS pins are currently named nand_dqs_0 and nand_dqs_1. However, they both seem to have the same function, just exposed on different pins (unlike the ethernet TX pins for example, where there's eth_txd0..3 - all of these can be active at the same time as they are different data lines). Rename the NAND DQS pins to nand_dqs_15 and nand_dqs_18 to reflect that it's the same functionality just exposed on different pins (BOOT_15 and BOOT_18). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-04-01 13:59:22 +00:00
GROUP(nand_dqs_15, 2, 27),
GROUP(nand_dqs_18, 2, 28),
pinctrl: Add support for Meson8b This patch adds support for the AmLogic Meson8b SoC. Signed-off-by: Carlo Caione <carlo@endlessm.com> Acked-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-29 10:56:42 +00:00
GROUP(sdxc_d0_c, 4, 30),
GROUP(sdxc_d13_c, 4, 29),
GROUP(sdxc_d47_c, 4, 28),
GROUP(sdxc_clk_c, 7, 19),
GROUP(sdxc_cmd_c, 7, 18),
GROUP(nor_d, 5, 1),
GROUP(nor_q, 5, 3),
GROUP(nor_c, 5, 2),
GROUP(nor_cs, 5, 0),
GROUP(sd_d0_c, 6, 29),
GROUP(sd_d1_c, 6, 28),
GROUP(sd_d2_c, 6, 27),
GROUP(sd_d3_c, 6, 26),
GROUP(sd_cmd_c, 6, 30),
GROUP(sd_clk_c, 6, 31),
/* bank CARD */
GROUP(sd_d1_b, 2, 14),
GROUP(sd_d0_b, 2, 15),
GROUP(sd_clk_b, 2, 11),
GROUP(sd_cmd_b, 2, 10),
GROUP(sd_d3_b, 2, 12),
GROUP(sd_d2_b, 2, 13),
GROUP(sdxc_d13_b, 2, 6),
GROUP(sdxc_d0_b, 2, 7),
GROUP(sdxc_clk_b, 2, 5),
GROUP(sdxc_cmd_b, 2, 4),
pinctrl: amlogic: Make driver independent from two-domain configuration In the Amlogic Meson8 / Meson8b platforms we have two different buses: cbus and aobus, corresponding to 2 different power domains (regular and always-on). On each bus a different set of registers is mapped to manage muxes, GPIOs and in general to control a clear subset of the pins. Considering this architecture, having two different pinctrl devices, one for each bus / power domain, makes much more sense than just having one single device. Right now we have one single pin controller driver that uses two different domains (represented by 'gpio' and 'gpio-ao' sub-nodes in the DTS) to manage the set of registers on the two buses. This dual-domain configuration is hardcoded into the driver that strictly requires one domain for each bus in the same pin controller device. With this patch we refactor the driver to allow splitting the driver in two parts. This change is needed to have a proper description of the HW in the device-tree where we want to introduce aobus and cbus. Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-01 22:04:34 +00:00
/* bank DIF */
GROUP(eth_rxd1, 6, 0),
GROUP(eth_rxd0, 6, 1),
GROUP(eth_rx_dv, 6, 2),
GROUP(eth_rx_clk, 6, 3),
GROUP(eth_txd0_1, 6, 4),
GROUP(eth_txd1_1, 6, 5),
pinctrl: meson: Fix eth_tx_en bit index Fix pinctrl eth_tx_en bit index according to Hardkernel ODROID-C1 datasheet. Signed-off-by: Alexander Müller <serveralex@gmail.com> Acked-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-08 17:59:49 +00:00
GROUP(eth_tx_en, 6, 6),
pinctrl: amlogic: Make driver independent from two-domain configuration In the Amlogic Meson8 / Meson8b platforms we have two different buses: cbus and aobus, corresponding to 2 different power domains (regular and always-on). On each bus a different set of registers is mapped to manage muxes, GPIOs and in general to control a clear subset of the pins. Considering this architecture, having two different pinctrl devices, one for each bus / power domain, makes much more sense than just having one single device. Right now we have one single pin controller driver that uses two different domains (represented by 'gpio' and 'gpio-ao' sub-nodes in the DTS) to manage the set of registers on the two buses. This dual-domain configuration is hardcoded into the driver that strictly requires one domain for each bus in the same pin controller device. With this patch we refactor the driver to allow splitting the driver in two parts. This change is needed to have a proper description of the HW in the device-tree where we want to introduce aobus and cbus. Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-01 22:04:34 +00:00
GROUP(eth_ref_clk, 6, 8),
GROUP(eth_mdc, 6, 9),
GROUP(eth_mdio_en, 6, 10),
};
static struct meson_pmx_group meson8b_aobus_groups[] = {
pinctrl: meson: remove offset from pinctrl Offset on meson pinctrl and gpios is something that was carried from the vendor driver, where there is a weird link between the 2 controllers. Since these 2 controllers are independent, this offset adds an unnecessary complexity. This patch remove this manually set offset and rely on pinctrl to figure out the gpio base offset Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-09-20 13:39:20 +00:00
GPIO_GROUP(GPIOAO_0),
GPIO_GROUP(GPIOAO_1),
GPIO_GROUP(GPIOAO_2),
GPIO_GROUP(GPIOAO_3),
GPIO_GROUP(GPIOAO_4),
GPIO_GROUP(GPIOAO_5),
GPIO_GROUP(GPIOAO_6),
GPIO_GROUP(GPIOAO_7),
GPIO_GROUP(GPIOAO_8),
GPIO_GROUP(GPIOAO_9),
GPIO_GROUP(GPIOAO_10),
GPIO_GROUP(GPIOAO_11),
GPIO_GROUP(GPIOAO_12),
GPIO_GROUP(GPIOAO_13),
GPIO_GROUP(GPIO_BSD_EN),
GPIO_GROUP(GPIO_TEST_N),
pinctrl: amlogic: Make driver independent from two-domain configuration In the Amlogic Meson8 / Meson8b platforms we have two different buses: cbus and aobus, corresponding to 2 different power domains (regular and always-on). On each bus a different set of registers is mapped to manage muxes, GPIOs and in general to control a clear subset of the pins. Considering this architecture, having two different pinctrl devices, one for each bus / power domain, makes much more sense than just having one single device. Right now we have one single pin controller driver that uses two different domains (represented by 'gpio' and 'gpio-ao' sub-nodes in the DTS) to manage the set of registers on the two buses. This dual-domain configuration is hardcoded into the driver that strictly requires one domain for each bus in the same pin controller device. With this patch we refactor the driver to allow splitting the driver in two parts. This change is needed to have a proper description of the HW in the device-tree where we want to introduce aobus and cbus. Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-01 22:04:34 +00:00
pinctrl: Add support for Meson8b This patch adds support for the AmLogic Meson8b SoC. Signed-off-by: Carlo Caione <carlo@endlessm.com> Acked-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-29 10:56:42 +00:00
/* bank AO */
GROUP(uart_tx_ao_a, 0, 12),
GROUP(uart_rx_ao_a, 0, 11),
GROUP(uart_cts_ao_a, 0, 10),
GROUP(uart_rts_ao_a, 0, 9),
GROUP(i2c_mst_sck_ao, 0, 6),
GROUP(i2c_mst_sda_ao, 0, 5),
GROUP(clk_32k_in_out, 0, 18),
GROUP(remote_input, 0, 0),
GROUP(hdmi_cec_1, 0, 17),
GROUP(ir_blaster, 0, 31),
GROUP(pwm_c2, 0, 22),
GROUP(i2c_sck_ao, 0, 2),
GROUP(i2c_sda_ao, 0, 1),
GROUP(ir_remote_out, 0, 21),
GROUP(i2s_am_clk_out, 0, 30),
GROUP(i2s_ao_clk_out, 0, 29),
GROUP(i2s_lr_clk_out, 0, 28),
GROUP(i2s_out_01, 0, 27),
GROUP(uart_tx_ao_b0, 0, 26),
GROUP(uart_rx_ao_b0, 0, 25),
GROUP(uart_cts_ao_b, 0, 8),
GROUP(uart_rts_ao_b, 0, 7),
GROUP(uart_tx_ao_b1, 0, 24),
GROUP(uart_rx_ao_b1, 0, 23),
GROUP(spdif_out_1, 0, 16),
GROUP(i2s_in_ch01, 0, 13),
GROUP(i2s_ao_clk_in, 0, 15),
GROUP(i2s_lr_clk_in, 0, 14),
};
static const char * const gpio_groups[] = {
"GPIOX_0", "GPIOX_1", "GPIOX_2", "GPIOX_3", "GPIOX_4",
"GPIOX_5", "GPIOX_6", "GPIOX_7", "GPIOX_8", "GPIOX_9",
"GPIOX_10", "GPIOX_11", "GPIOX_16", "GPIOX_17", "GPIOX_18",
"GPIOX_19", "GPIOX_20", "GPIOX_21",
"GPIOY_0", "GPIOY_1", "GPIOY_3", "GPIOY_6", "GPIOY_7",
"GPIOY_8", "GPIOY_9", "GPIOY_10", "GPIOY_11", "GPIOY_12",
"GPIOY_13", "GPIOY_14",
"GPIODV_9", "GPIODV_24", "GPIODV_25", "GPIODV_26",
"GPIODV_27", "GPIODV_28", "GPIODV_29",
"GPIOH_0", "GPIOH_1", "GPIOH_2", "GPIOH_3", "GPIOH_4",
"GPIOH_5", "GPIOH_6", "GPIOH_7", "GPIOH_8", "GPIOH_9",
"CARD_0", "CARD_1", "CARD_2", "CARD_3", "CARD_4",
"CARD_5", "CARD_6",
"BOOT_0", "BOOT_1", "BOOT_2", "BOOT_3", "BOOT_4",
"BOOT_5", "BOOT_6", "BOOT_7", "BOOT_8", "BOOT_9",
"BOOT_10", "BOOT_11", "BOOT_12", "BOOT_13", "BOOT_14",
"BOOT_15", "BOOT_16", "BOOT_17", "BOOT_18",
"GPIOAO_0", "GPIOAO_1", "GPIOAO_2", "GPIOAO_3",
"GPIOAO_4", "GPIOAO_5", "GPIOAO_6", "GPIOAO_7",
"GPIOAO_8", "GPIOAO_9", "GPIOAO_10", "GPIOAO_11",
"GPIOAO_12", "GPIOAO_13", "GPIO_BSD_EN", "GPIO_TEST_N",
"DIF_0_P", "DIF_0_N", "DIF_1_P", "DIF_1_N",
"DIF_2_P", "DIF_2_N", "DIF_3_P", "DIF_3_N",
"DIF_4_P", "DIF_4_N"
};
static const char * const sd_a_groups[] = {
"sd_d0_a", "sd_d1_a", "sd_d2_a", "sd_d3_a", "sd_clk_a",
"sd_cmd_a"
};
static const char * const sdxc_a_groups[] = {
"sdxc_d0_0_a", "sdxc_d13_0_a", "sdxc_d47_a", "sdxc_clk_a",
"sdxc_cmd_a", "sdxc_d0_1_a", "sdxc_d0_13_1_a"
};
static const char * const pcm_a_groups[] = {
"pcm_out_a", "pcm_in_a", "pcm_fs_a", "pcm_clk_a"
};
static const char * const uart_a_groups[] = {
"uart_tx_a", "uart_rx_a", "uart_cts_a", "uart_rts_a"
};
static const char * const uart_b_groups[] = {
"uart_tx_b0", "uart_rx_b0", "uart_cts_b0", "uart_rts_b0",
"uart_tx_b1", "uart_rx_b1", "uart_cts_b1", "uart_rts_b1"
};
static const char * const iso7816_groups[] = {
"iso7816_det", "iso7816_reset", "iso7816_0_clk", "iso7816_0_data",
"iso7816_1_clk", "iso7816_1_data", "iso7816_2_clk", "iso7816_2_data"
};
static const char * const i2c_d_groups[] = {
"i2c_sda_d0", "i2c_sck_d0", "i2c_sda_d1", "i2c_sck_d1"
};
static const char * const xtal_groups[] = {
"xtal_32k_out", "xtal_24m_out", "xtal_24m", "xtal24_out"
};
static const char * const uart_c_groups[] = {
"uart_tx_c", "uart_rx_c", "uart_cts_c", "uart_rts_c"
};
static const char * const i2c_c_groups[] = {
"i2c_sda_c0", "i2c_sck_c0", "i2c_sda_c1", "i2c_sck_c1"
};
static const char * const hdmi_groups[] = {
pinctrl: amlogic: Separate some pin functions for Meson8 / Meson8b Separate functions for pins controlled by different pin controllers. Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-01 22:04:33 +00:00
"hdmi_hpd", "hdmi_sda", "hdmi_scl", "hdmi_cec_0"
};
static const char * const hdmi_cec_groups[] = {
pinctrl: Add support for Meson8b This patch adds support for the AmLogic Meson8b SoC. Signed-off-by: Carlo Caione <carlo@endlessm.com> Acked-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-29 10:56:42 +00:00
"hdmi_cec_1"
};
static const char * const spi_groups[] = {
"spi_ss0_0", "spi_miso_0", "spi_mosi_0", "spi_sclk_0",
"spi_ss0_1", "spi_ss1", "spi_sclk_1", "spi_mosi_1",
"spi_miso_1", "spi_ss2"
};
static const char * const ethernet_groups[] = {
"eth_tx_clk", "eth_tx_en", "eth_txd1_0", "eth_txd1_1",
"eth_txd0_0", "eth_txd0_1", "eth_rx_clk", "eth_rx_dv",
"eth_rxd1", "eth_rxd0", "eth_mdio_en", "eth_mdc", "eth_ref_clk",
"eth_txd2", "eth_txd3"
};
static const char * const i2c_a_groups[] = {
"i2c_sda_a", "i2c_sck_a",
};
static const char * const i2c_b_groups[] = {
"i2c_sda_b0", "i2c_sck_b0", "i2c_sda_b1", "i2c_sck_b1"
};
static const char * const sd_c_groups[] = {
"sd_d0_c", "sd_d1_c", "sd_d2_c", "sd_d3_c",
"sd_cmd_c", "sd_clk_c"
};
static const char * const sdxc_c_groups[] = {
"sdxc_d0_c", "sdxc_d13_c", "sdxc_d47_c", "sdxc_cmd_c",
"sdxc_clk_c"
};
static const char * const nand_groups[] = {
"nand_io", "nand_io_ce0", "nand_io_ce1",
"nand_io_rb0", "nand_ale", "nand_cle",
pinctrl: meson: meson8b: rename the NAND DQS pin definitions The NAND DQS pins are currently named nand_dqs_0 and nand_dqs_1. However, they both seem to have the same function, just exposed on different pins (unlike the ethernet TX pins for example, where there's eth_txd0..3 - all of these can be active at the same time as they are different data lines). Rename the NAND DQS pins to nand_dqs_15 and nand_dqs_18 to reflect that it's the same functionality just exposed on different pins (BOOT_15 and BOOT_18). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-04-01 13:59:22 +00:00
"nand_wen_clk", "nand_ren_clk", "nand_dqs_15",
"nand_dqs_18"
pinctrl: Add support for Meson8b This patch adds support for the AmLogic Meson8b SoC. Signed-off-by: Carlo Caione <carlo@endlessm.com> Acked-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-29 10:56:42 +00:00
};
static const char * const nor_groups[] = {
"nor_d", "nor_q", "nor_c", "nor_cs"
};
static const char * const sd_b_groups[] = {
"sd_d1_b", "sd_d0_b", "sd_clk_b", "sd_cmd_b",
"sd_d3_b", "sd_d2_b"
};
static const char * const sdxc_b_groups[] = {
"sdxc_d13_b", "sdxc_d0_b", "sdxc_clk_b", "sdxc_cmd_b"
};
static const char * const uart_ao_groups[] = {
"uart_tx_ao_a", "uart_rx_ao_a", "uart_cts_ao_a", "uart_rts_ao_a"
};
static const char * const remote_groups[] = {
"remote_input", "ir_blaster", "ir_remote_out"
};
static const char * const i2c_slave_ao_groups[] = {
"i2c_sck_ao", "i2c_sda_ao"
};
static const char * const uart_ao_b_groups[] = {
"uart_tx_ao_b0", "uart_rx_ao_b0", "uart_tx_ao_b1", "uart_rx_ao_b1",
"uart_cts_ao_b", "uart_rts_ao_b"
};
static const char * const i2c_mst_ao_groups[] = {
"i2c_mst_sck_ao", "i2c_mst_sda_ao"
};
pinctrl: amlogic: Separate some pin functions for Meson8 / Meson8b Separate functions for pins controlled by different pin controllers. Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-01 22:04:33 +00:00
static const char * const clk_24m_groups[] = {
pinctrl: amlogic: Make driver independent from two-domain configuration In the Amlogic Meson8 / Meson8b platforms we have two different buses: cbus and aobus, corresponding to 2 different power domains (regular and always-on). On each bus a different set of registers is mapped to manage muxes, GPIOs and in general to control a clear subset of the pins. Considering this architecture, having two different pinctrl devices, one for each bus / power domain, makes much more sense than just having one single device. Right now we have one single pin controller driver that uses two different domains (represented by 'gpio' and 'gpio-ao' sub-nodes in the DTS) to manage the set of registers on the two buses. This dual-domain configuration is hardcoded into the driver that strictly requires one domain for each bus in the same pin controller device. With this patch we refactor the driver to allow splitting the driver in two parts. This change is needed to have a proper description of the HW in the device-tree where we want to introduce aobus and cbus. Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-01 22:04:34 +00:00
"clk_24m_out"
pinctrl: amlogic: Separate some pin functions for Meson8 / Meson8b Separate functions for pins controlled by different pin controllers. Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-01 22:04:33 +00:00
};
static const char * const clk_32k_groups[] = {
pinctrl: amlogic: Make driver independent from two-domain configuration In the Amlogic Meson8 / Meson8b platforms we have two different buses: cbus and aobus, corresponding to 2 different power domains (regular and always-on). On each bus a different set of registers is mapped to manage muxes, GPIOs and in general to control a clear subset of the pins. Considering this architecture, having two different pinctrl devices, one for each bus / power domain, makes much more sense than just having one single device. Right now we have one single pin controller driver that uses two different domains (represented by 'gpio' and 'gpio-ao' sub-nodes in the DTS) to manage the set of registers on the two buses. This dual-domain configuration is hardcoded into the driver that strictly requires one domain for each bus in the same pin controller device. With this patch we refactor the driver to allow splitting the driver in two parts. This change is needed to have a proper description of the HW in the device-tree where we want to introduce aobus and cbus. Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-01 22:04:34 +00:00
"clk_32k_in_out"
pinctrl: Add support for Meson8b This patch adds support for the AmLogic Meson8b SoC. Signed-off-by: Carlo Caione <carlo@endlessm.com> Acked-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-29 10:56:42 +00:00
};
pinctrl: amlogic: Separate some pin functions for Meson8 / Meson8b Separate functions for pins controlled by different pin controllers. Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-01 22:04:33 +00:00
static const char * const spdif_0_groups[] = {
"spdif_out_0"
};
static const char * const spdif_1_groups[] = {
"spdif_out_1"
pinctrl: Add support for Meson8b This patch adds support for the AmLogic Meson8b SoC. Signed-off-by: Carlo Caione <carlo@endlessm.com> Acked-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-29 10:56:42 +00:00
};
static const char * const i2s_groups[] = {
"i2s_am_clk_out", "i2s_ao_clk_out", "i2s_lr_clk_out",
"i2s_out_01", "i2s_in_ch01", "i2s_ao_clk_in",
"i2s_lr_clk_in"
};
static const char * const pwm_b_groups[] = {
"pwm_b"
};
static const char * const pwm_c_groups[] = {
pinctrl: amlogic: Separate some pin functions for Meson8 / Meson8b Separate functions for pins controlled by different pin controllers. Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-01 22:04:33 +00:00
"pwm_c0", "pwm_c1"
};
static const char * const pwm_c_ao_groups[] = {
"pwm_c2"
pinctrl: Add support for Meson8b This patch adds support for the AmLogic Meson8b SoC. Signed-off-by: Carlo Caione <carlo@endlessm.com> Acked-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-29 10:56:42 +00:00
};
static const char * const pwm_d_groups[] = {
"pwm_d"
};
static const char * const pwm_e_groups[] = {
"pwm_e"
};
static const char * const pwm_vs_groups[] = {
"pwm_vs_0", "pwm_vs_1", "pwm_vs_2",
"pwm_vs_3", "pwm_vs_4"
};
static const char * const tsin_a_groups[] = {
"tsin_d0_a", "tsin_d17_a", "tsin_clk_a", "tsin_sop_a",
"tsin_d_valid_a"
};
static const char * const tsin_b_groups[] = {
"tsin_d0_b", "tsin_clk_b", "tsin_sop_b", "tsin_d_valid_b"
};
pinctrl: amlogic: Make driver independent from two-domain configuration In the Amlogic Meson8 / Meson8b platforms we have two different buses: cbus and aobus, corresponding to 2 different power domains (regular and always-on). On each bus a different set of registers is mapped to manage muxes, GPIOs and in general to control a clear subset of the pins. Considering this architecture, having two different pinctrl devices, one for each bus / power domain, makes much more sense than just having one single device. Right now we have one single pin controller driver that uses two different domains (represented by 'gpio' and 'gpio-ao' sub-nodes in the DTS) to manage the set of registers on the two buses. This dual-domain configuration is hardcoded into the driver that strictly requires one domain for each bus in the same pin controller device. With this patch we refactor the driver to allow splitting the driver in two parts. This change is needed to have a proper description of the HW in the device-tree where we want to introduce aobus and cbus. Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-01 22:04:34 +00:00
static struct meson_pmx_func meson8b_cbus_functions[] = {
pinctrl: Add support for Meson8b This patch adds support for the AmLogic Meson8b SoC. Signed-off-by: Carlo Caione <carlo@endlessm.com> Acked-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-29 10:56:42 +00:00
FUNCTION(gpio),
FUNCTION(sd_a),
FUNCTION(sdxc_a),
FUNCTION(pcm_a),
FUNCTION(uart_a),
FUNCTION(uart_b),
FUNCTION(iso7816),
FUNCTION(i2c_d),
FUNCTION(xtal),
FUNCTION(uart_c),
FUNCTION(i2c_c),
FUNCTION(hdmi),
FUNCTION(spi),
FUNCTION(ethernet),
FUNCTION(i2c_a),
FUNCTION(i2c_b),
FUNCTION(sd_c),
FUNCTION(sdxc_c),
FUNCTION(nand),
FUNCTION(nor),
FUNCTION(sd_b),
FUNCTION(sdxc_b),
pinctrl: amlogic: Separate some pin functions for Meson8 / Meson8b Separate functions for pins controlled by different pin controllers. Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-01 22:04:33 +00:00
FUNCTION(spdif_0),
pinctrl: Add support for Meson8b This patch adds support for the AmLogic Meson8b SoC. Signed-off-by: Carlo Caione <carlo@endlessm.com> Acked-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-29 10:56:42 +00:00
FUNCTION(pwm_b),
FUNCTION(pwm_c),
FUNCTION(pwm_d),
FUNCTION(pwm_e),
FUNCTION(pwm_vs),
FUNCTION(tsin_a),
FUNCTION(tsin_b),
pinctrl: amlogic: Separate some pin functions for Meson8 / Meson8b Separate functions for pins controlled by different pin controllers. Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-01 22:04:33 +00:00
FUNCTION(clk_24m),
pinctrl: Add support for Meson8b This patch adds support for the AmLogic Meson8b SoC. Signed-off-by: Carlo Caione <carlo@endlessm.com> Acked-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-29 10:56:42 +00:00
};
pinctrl: amlogic: Make driver independent from two-domain configuration In the Amlogic Meson8 / Meson8b platforms we have two different buses: cbus and aobus, corresponding to 2 different power domains (regular and always-on). On each bus a different set of registers is mapped to manage muxes, GPIOs and in general to control a clear subset of the pins. Considering this architecture, having two different pinctrl devices, one for each bus / power domain, makes much more sense than just having one single device. Right now we have one single pin controller driver that uses two different domains (represented by 'gpio' and 'gpio-ao' sub-nodes in the DTS) to manage the set of registers on the two buses. This dual-domain configuration is hardcoded into the driver that strictly requires one domain for each bus in the same pin controller device. With this patch we refactor the driver to allow splitting the driver in two parts. This change is needed to have a proper description of the HW in the device-tree where we want to introduce aobus and cbus. Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-01 22:04:34 +00:00
static struct meson_pmx_func meson8b_aobus_functions[] = {
FUNCTION(uart_ao),
FUNCTION(uart_ao_b),
FUNCTION(i2c_slave_ao),
FUNCTION(i2c_mst_ao),
FUNCTION(i2s),
FUNCTION(remote),
FUNCTION(clk_32k),
FUNCTION(pwm_c_ao),
FUNCTION(spdif_1),
FUNCTION(hdmi_cec),
};
static struct meson_bank meson8b_cbus_banks[] = {
pinctrl: meson: meson8b: fix requesting GPIOs greater than GPIOZ_3 Meson8b is a cost reduced variant of the Meson8 SoC. It's package size is smaller than Meson8. Unfortunately there are a few key differences which cannot be seen without close inspection of the code and the public S805 datasheet: - the GPIOX bank is missing the GPIOX_12, GPIOX_13, GPIOX_14 and GPIOX_15 GPIOs - the GPIOY bank is missing the GPIOY_2, GPIOY_4, GPIOY_5, GPIOY_15 and GPIOY_16 GPIOs - the GPIODV bank is missing all GPIOs except GPIODV_9, GPIODV_24, GPIODV_25, GPIODV_26, GPIODV_27, GPIODV_28 and GPIODV_29 - the GPIOZ bank is missing completely - there is a new GPIO bank called "DIF" This means that Meson8b only has 83 actual GPIO lines. Without any holes there would be 130 GPIO lines in total (120 are inherited from Meson8 plus 10 new from the DIF bank). GPIOs greater GPIOZ_3 (whose ID is 83 - as a reminder: this is exactly the number of actual GPIO lines on Meson8b and also the value of meson8b_cbus_pinctrl_data.num_pins) cannot berequested. Using CARD_6 (which used ID 100 prior to this patch, "base of the GPIO controller was 382) as an example: $ echo 482 > /sys/class/gpio/export export_store: invalid GPIO 482 This removes all non-existing pins from to dt-bindings header file (include/dt-bindings/gpio/meson8b-gpio.h). This allows us to have a consecutive numbering for the GPIO #defines (GPIOY_2 doesn't exist for example, so previously the GPIOY_3 ID was "GPIOY_1 + 2", after this patch it is "GPIOY_1 + 1"). As a nice side-effect this means that we get compile-time (instead of runtime) errors if Meson8b .dts uses a pin that only exists on Meson8. Additionally the pinctrl-meson8b driver has to be updated to handle this new GPIO numbering. By default a struct meson_bank only handles GPIO banks where the pins are numbered consecutively because it calculates the bit offsets based on the GPIO IDs. This is solved by taking the original BANK() definition and splitting it into consecutive subsets (X0..11 and X16..21). The bit offsets for each new bank includes the skipped GPIOs (the definition of the "X0..11" bank is identical to the old "X" bank apart from the "last IRQ" field, the definition of the new, split "X16..21" bank takes the original "X" bank and adds 16 - the start of the new split bank - to the "first IRQ", pullen bit, pull bit, dir bit, out bit and in bit). Commit 984cffdeaeb7ea ("pinctrl: Fix gpio/pin mapping for Meson8b") fixed the same issue by setting "ngpio" (of the gpio_chip) to 130. Unfortunately this broke in db80f0e158e621 ("pinctrl: meson: get rid of unneeded domain structures"). The solution from this patch was considered to be better than the previous attempt at fixing this because it provides compile-time error checking for the GPIOs that exist on Meson8 but don't exist on Meson8b. The following pins were tested on an Odroid-C1 using the sysfs GPIO interface checking that their value (high or low) could be read: - GPIOX_0, GPIOX_1, GPIOX_2, GPIOX_3, GPIOX_4, GPIOX_5, GPIOX_6, GPIOX_7, GPIOX_8, GPIOX_9, GPIOX_10, GPIOX_11, GPIOX_18, GPIOX_19, GPIOX_20, GPIOX_21 - GPIOY_3, GPIOY_7, GPIOY_8 (some of these had to be pulled up because they were low by default, others were high by default so these had to be pulled down) Reported-by: Linus Lüssing <linus.luessing@c0d3.blue> Suggested-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-02-25 11:38:53 +00:00
/* name first last irq pullen pull dir out in */
BANK("X0..11", GPIOX_0, GPIOX_11, 97, 108, 4, 0, 4, 0, 0, 0, 1, 0, 2, 0),
BANK("X16..21", GPIOX_16, GPIOX_21, 113, 118, 4, 16, 4, 16, 0, 16, 1, 16, 2, 16),
BANK("Y0..1", GPIOY_0, GPIOY_1, 80, 81, 3, 0, 3, 0, 3, 0, 4, 0, 5, 0),
BANK("Y3", GPIOY_3, GPIOY_3, 83, 83, 3, 3, 3, 3, 3, 3, 4, 3, 5, 3),
BANK("Y6..14", GPIOY_6, GPIOY_14, 86, 94, 3, 6, 3, 6, 3, 6, 4, 6, 5, 6),
BANK("DV9", GPIODV_9, GPIODV_9, 59, 59, 0, 9, 0, 9, 7, 9, 8, 9, 9, 9),
BANK("DV24..29", GPIODV_24, GPIODV_29, 74, 79, 0, 24, 0, 24, 7, 24, 8, 24, 9, 24),
BANK("H", GPIOH_0, GPIOH_9, 14, 23, 1, 16, 1, 16, 9, 19, 10, 19, 11, 19),
BANK("CARD", CARD_0, CARD_6, 43, 49, 2, 20, 2, 20, 0, 22, 1, 22, 2, 22),
BANK("BOOT", BOOT_0, BOOT_18, 24, 42, 2, 0, 2, 0, 9, 0, 10, 0, 11, 0),
pinctrl: meson: add interrupts to pinctrl data Add GPIO interrupt information to pinctrl data. Added to the original version from Jerome was data for Meson GXL. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-08 19:37:50 +00:00
/*
* The following bank is not mentionned in the public datasheet
* There is no information whether it can be used with the gpio
* interrupt controller
*/
pinctrl: meson: meson8b: fix requesting GPIOs greater than GPIOZ_3 Meson8b is a cost reduced variant of the Meson8 SoC. It's package size is smaller than Meson8. Unfortunately there are a few key differences which cannot be seen without close inspection of the code and the public S805 datasheet: - the GPIOX bank is missing the GPIOX_12, GPIOX_13, GPIOX_14 and GPIOX_15 GPIOs - the GPIOY bank is missing the GPIOY_2, GPIOY_4, GPIOY_5, GPIOY_15 and GPIOY_16 GPIOs - the GPIODV bank is missing all GPIOs except GPIODV_9, GPIODV_24, GPIODV_25, GPIODV_26, GPIODV_27, GPIODV_28 and GPIODV_29 - the GPIOZ bank is missing completely - there is a new GPIO bank called "DIF" This means that Meson8b only has 83 actual GPIO lines. Without any holes there would be 130 GPIO lines in total (120 are inherited from Meson8 plus 10 new from the DIF bank). GPIOs greater GPIOZ_3 (whose ID is 83 - as a reminder: this is exactly the number of actual GPIO lines on Meson8b and also the value of meson8b_cbus_pinctrl_data.num_pins) cannot berequested. Using CARD_6 (which used ID 100 prior to this patch, "base of the GPIO controller was 382) as an example: $ echo 482 > /sys/class/gpio/export export_store: invalid GPIO 482 This removes all non-existing pins from to dt-bindings header file (include/dt-bindings/gpio/meson8b-gpio.h). This allows us to have a consecutive numbering for the GPIO #defines (GPIOY_2 doesn't exist for example, so previously the GPIOY_3 ID was "GPIOY_1 + 2", after this patch it is "GPIOY_1 + 1"). As a nice side-effect this means that we get compile-time (instead of runtime) errors if Meson8b .dts uses a pin that only exists on Meson8. Additionally the pinctrl-meson8b driver has to be updated to handle this new GPIO numbering. By default a struct meson_bank only handles GPIO banks where the pins are numbered consecutively because it calculates the bit offsets based on the GPIO IDs. This is solved by taking the original BANK() definition and splitting it into consecutive subsets (X0..11 and X16..21). The bit offsets for each new bank includes the skipped GPIOs (the definition of the "X0..11" bank is identical to the old "X" bank apart from the "last IRQ" field, the definition of the new, split "X16..21" bank takes the original "X" bank and adds 16 - the start of the new split bank - to the "first IRQ", pullen bit, pull bit, dir bit, out bit and in bit). Commit 984cffdeaeb7ea ("pinctrl: Fix gpio/pin mapping for Meson8b") fixed the same issue by setting "ngpio" (of the gpio_chip) to 130. Unfortunately this broke in db80f0e158e621 ("pinctrl: meson: get rid of unneeded domain structures"). The solution from this patch was considered to be better than the previous attempt at fixing this because it provides compile-time error checking for the GPIOs that exist on Meson8 but don't exist on Meson8b. The following pins were tested on an Odroid-C1 using the sysfs GPIO interface checking that their value (high or low) could be read: - GPIOX_0, GPIOX_1, GPIOX_2, GPIOX_3, GPIOX_4, GPIOX_5, GPIOX_6, GPIOX_7, GPIOX_8, GPIOX_9, GPIOX_10, GPIOX_11, GPIOX_18, GPIOX_19, GPIOX_20, GPIOX_21 - GPIOY_3, GPIOY_7, GPIOY_8 (some of these had to be pulled up because they were low by default, others were high by default so these had to be pulled down) Reported-by: Linus Lüssing <linus.luessing@c0d3.blue> Suggested-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-02-25 11:38:53 +00:00
BANK("DIF", DIF_0_P, DIF_4_N, -1, -1, 5, 8, 5, 8, 12, 12, 13, 12, 14, 12),
pinctrl: Add support for Meson8b This patch adds support for the AmLogic Meson8b SoC. Signed-off-by: Carlo Caione <carlo@endlessm.com> Acked-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-29 10:56:42 +00:00
};
pinctrl: amlogic: Make driver independent from two-domain configuration In the Amlogic Meson8 / Meson8b platforms we have two different buses: cbus and aobus, corresponding to 2 different power domains (regular and always-on). On each bus a different set of registers is mapped to manage muxes, GPIOs and in general to control a clear subset of the pins. Considering this architecture, having two different pinctrl devices, one for each bus / power domain, makes much more sense than just having one single device. Right now we have one single pin controller driver that uses two different domains (represented by 'gpio' and 'gpio-ao' sub-nodes in the DTS) to manage the set of registers on the two buses. This dual-domain configuration is hardcoded into the driver that strictly requires one domain for each bus in the same pin controller device. With this patch we refactor the driver to allow splitting the driver in two parts. This change is needed to have a proper description of the HW in the device-tree where we want to introduce aobus and cbus. Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-01 22:04:34 +00:00
static struct meson_bank meson8b_aobus_banks[] = {
pinctrl: meson: remove offset from pinctrl Offset on meson pinctrl and gpios is something that was carried from the vendor driver, where there is a weird link between the 2 controllers. Since these 2 controllers are independent, this offset adds an unnecessary complexity. This patch remove this manually set offset and rely on pinctrl to figure out the gpio base offset Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-09-20 13:39:20 +00:00
/* name first lastc irq pullen pull dir out in */
BANK("AO", GPIOAO_0, GPIO_TEST_N, 0, 13, 0, 0, 0, 16, 0, 0, 0, 16, 1, 0),
pinctrl: Add support for Meson8b This patch adds support for the AmLogic Meson8b SoC. Signed-off-by: Carlo Caione <carlo@endlessm.com> Acked-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-29 10:56:42 +00:00
};
pinctrl: meson: separate soc drivers When meson pinctrl is enabled, all meson platforms pinctrl drivers are built in the kernel, with a significant amount of data. This leads to situation where pinctrl drivers targeting an architecture are also compiled and shipped on another one (ex: meson8 - ARM - compiled and shipped on ARM64 builds). This is a waste of memory we can easily avoid. This change makes 4 pinctrl drivers (1 per SoC) out the original single driver, allowing to compile and ship only the ones required. Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-12 12:40:25 +00:00
static struct meson_pinctrl_data meson8b_cbus_pinctrl_data = {
pinctrl: amlogic: Make driver independent from two-domain configuration In the Amlogic Meson8 / Meson8b platforms we have two different buses: cbus and aobus, corresponding to 2 different power domains (regular and always-on). On each bus a different set of registers is mapped to manage muxes, GPIOs and in general to control a clear subset of the pins. Considering this architecture, having two different pinctrl devices, one for each bus / power domain, makes much more sense than just having one single device. Right now we have one single pin controller driver that uses two different domains (represented by 'gpio' and 'gpio-ao' sub-nodes in the DTS) to manage the set of registers on the two buses. This dual-domain configuration is hardcoded into the driver that strictly requires one domain for each bus in the same pin controller device. With this patch we refactor the driver to allow splitting the driver in two parts. This change is needed to have a proper description of the HW in the device-tree where we want to introduce aobus and cbus. Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-01 22:04:34 +00:00
.name = "cbus-banks",
.pins = meson8b_cbus_pins,
.groups = meson8b_cbus_groups,
.funcs = meson8b_cbus_functions,
pinctrl: meson: get rid of unneeded domain structures The driver originally supported more domains (register ranges) per pinctrl device, but since commit 9dab1868ec0d ("pinctrl: amlogic: Make driver independent from two-domain configuration") each device gets assigned a single domain and we instantiate multiple pinctrl devices in the DT. Therefore, now the 'meson_domain' and 'meson_domain_data' structures don't have any reason to exist and can be removed to make the model simpler to understand. This commit doesn't change behavior. Tested on a Odroid-C2. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-13 17:41:18 +00:00
.banks = meson8b_cbus_banks,
pinctrl: amlogic: Make driver independent from two-domain configuration In the Amlogic Meson8 / Meson8b platforms we have two different buses: cbus and aobus, corresponding to 2 different power domains (regular and always-on). On each bus a different set of registers is mapped to manage muxes, GPIOs and in general to control a clear subset of the pins. Considering this architecture, having two different pinctrl devices, one for each bus / power domain, makes much more sense than just having one single device. Right now we have one single pin controller driver that uses two different domains (represented by 'gpio' and 'gpio-ao' sub-nodes in the DTS) to manage the set of registers on the two buses. This dual-domain configuration is hardcoded into the driver that strictly requires one domain for each bus in the same pin controller device. With this patch we refactor the driver to allow splitting the driver in two parts. This change is needed to have a proper description of the HW in the device-tree where we want to introduce aobus and cbus. Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-01 22:04:34 +00:00
.num_pins = ARRAY_SIZE(meson8b_cbus_pins),
.num_groups = ARRAY_SIZE(meson8b_cbus_groups),
.num_funcs = ARRAY_SIZE(meson8b_cbus_functions),
pinctrl: meson: get rid of unneeded domain structures The driver originally supported more domains (register ranges) per pinctrl device, but since commit 9dab1868ec0d ("pinctrl: amlogic: Make driver independent from two-domain configuration") each device gets assigned a single domain and we instantiate multiple pinctrl devices in the DT. Therefore, now the 'meson_domain' and 'meson_domain_data' structures don't have any reason to exist and can be removed to make the model simpler to understand. This commit doesn't change behavior. Tested on a Odroid-C2. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-13 17:41:18 +00:00
.num_banks = ARRAY_SIZE(meson8b_cbus_banks),
pinctrl: meson: rework pinmux ops This change prepare the introduction of new meson SoC. This new SoC will share the same gpio/pinconf registers but the pinmux part will be different. While the format of the data associated with each pinmux group will change, the way to handle pinmuxing will be similar. To deal with this new situation, the meson_pmx_struture is kept but the data associated to it is now generic. This allows to reuse the basic functions which would otherwise be copy/pasted in each pinmux driver (such as getting the name a count of groups and functions) Only the functions actually using this specific data is taken out of the common code and is handling the SoC pinmuxing Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-12 12:40:26 +00:00
.pmx_ops = &meson8_pmx_ops,
pinctrl: amlogic: Make driver independent from two-domain configuration In the Amlogic Meson8 / Meson8b platforms we have two different buses: cbus and aobus, corresponding to 2 different power domains (regular and always-on). On each bus a different set of registers is mapped to manage muxes, GPIOs and in general to control a clear subset of the pins. Considering this architecture, having two different pinctrl devices, one for each bus / power domain, makes much more sense than just having one single device. Right now we have one single pin controller driver that uses two different domains (represented by 'gpio' and 'gpio-ao' sub-nodes in the DTS) to manage the set of registers on the two buses. This dual-domain configuration is hardcoded into the driver that strictly requires one domain for each bus in the same pin controller device. With this patch we refactor the driver to allow splitting the driver in two parts. This change is needed to have a proper description of the HW in the device-tree where we want to introduce aobus and cbus. Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-01 22:04:34 +00:00
};
pinctrl: meson: separate soc drivers When meson pinctrl is enabled, all meson platforms pinctrl drivers are built in the kernel, with a significant amount of data. This leads to situation where pinctrl drivers targeting an architecture are also compiled and shipped on another one (ex: meson8 - ARM - compiled and shipped on ARM64 builds). This is a waste of memory we can easily avoid. This change makes 4 pinctrl drivers (1 per SoC) out the original single driver, allowing to compile and ship only the ones required. Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-12 12:40:25 +00:00
static struct meson_pinctrl_data meson8b_aobus_pinctrl_data = {
pinctrl: meson: get rid of unneeded domain structures The driver originally supported more domains (register ranges) per pinctrl device, but since commit 9dab1868ec0d ("pinctrl: amlogic: Make driver independent from two-domain configuration") each device gets assigned a single domain and we instantiate multiple pinctrl devices in the DT. Therefore, now the 'meson_domain' and 'meson_domain_data' structures don't have any reason to exist and can be removed to make the model simpler to understand. This commit doesn't change behavior. Tested on a Odroid-C2. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-13 17:41:18 +00:00
.name = "aobus-banks",
pinctrl: amlogic: Make driver independent from two-domain configuration In the Amlogic Meson8 / Meson8b platforms we have two different buses: cbus and aobus, corresponding to 2 different power domains (regular and always-on). On each bus a different set of registers is mapped to manage muxes, GPIOs and in general to control a clear subset of the pins. Considering this architecture, having two different pinctrl devices, one for each bus / power domain, makes much more sense than just having one single device. Right now we have one single pin controller driver that uses two different domains (represented by 'gpio' and 'gpio-ao' sub-nodes in the DTS) to manage the set of registers on the two buses. This dual-domain configuration is hardcoded into the driver that strictly requires one domain for each bus in the same pin controller device. With this patch we refactor the driver to allow splitting the driver in two parts. This change is needed to have a proper description of the HW in the device-tree where we want to introduce aobus and cbus. Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-01 22:04:34 +00:00
.pins = meson8b_aobus_pins,
.groups = meson8b_aobus_groups,
.funcs = meson8b_aobus_functions,
pinctrl: meson: get rid of unneeded domain structures The driver originally supported more domains (register ranges) per pinctrl device, but since commit 9dab1868ec0d ("pinctrl: amlogic: Make driver independent from two-domain configuration") each device gets assigned a single domain and we instantiate multiple pinctrl devices in the DT. Therefore, now the 'meson_domain' and 'meson_domain_data' structures don't have any reason to exist and can be removed to make the model simpler to understand. This commit doesn't change behavior. Tested on a Odroid-C2. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-13 17:41:18 +00:00
.banks = meson8b_aobus_banks,
pinctrl: amlogic: Make driver independent from two-domain configuration In the Amlogic Meson8 / Meson8b platforms we have two different buses: cbus and aobus, corresponding to 2 different power domains (regular and always-on). On each bus a different set of registers is mapped to manage muxes, GPIOs and in general to control a clear subset of the pins. Considering this architecture, having two different pinctrl devices, one for each bus / power domain, makes much more sense than just having one single device. Right now we have one single pin controller driver that uses two different domains (represented by 'gpio' and 'gpio-ao' sub-nodes in the DTS) to manage the set of registers on the two buses. This dual-domain configuration is hardcoded into the driver that strictly requires one domain for each bus in the same pin controller device. With this patch we refactor the driver to allow splitting the driver in two parts. This change is needed to have a proper description of the HW in the device-tree where we want to introduce aobus and cbus. Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-01 22:04:34 +00:00
.num_pins = ARRAY_SIZE(meson8b_aobus_pins),
.num_groups = ARRAY_SIZE(meson8b_aobus_groups),
.num_funcs = ARRAY_SIZE(meson8b_aobus_functions),
pinctrl: meson: get rid of unneeded domain structures The driver originally supported more domains (register ranges) per pinctrl device, but since commit 9dab1868ec0d ("pinctrl: amlogic: Make driver independent from two-domain configuration") each device gets assigned a single domain and we instantiate multiple pinctrl devices in the DT. Therefore, now the 'meson_domain' and 'meson_domain_data' structures don't have any reason to exist and can be removed to make the model simpler to understand. This commit doesn't change behavior. Tested on a Odroid-C2. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-13 17:41:18 +00:00
.num_banks = ARRAY_SIZE(meson8b_aobus_banks),
pinctrl: meson: rework pinmux ops This change prepare the introduction of new meson SoC. This new SoC will share the same gpio/pinconf registers but the pinmux part will be different. While the format of the data associated with each pinmux group will change, the way to handle pinmuxing will be similar. To deal with this new situation, the meson_pmx_struture is kept but the data associated to it is now generic. This allows to reuse the basic functions which would otherwise be copy/pasted in each pinmux driver (such as getting the name a count of groups and functions) Only the functions actually using this specific data is taken out of the common code and is handling the SoC pinmuxing Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-12 12:40:26 +00:00
.pmx_ops = &meson8_pmx_ops,
pinctrl: Add support for Meson8b This patch adds support for the AmLogic Meson8b SoC. Signed-off-by: Carlo Caione <carlo@endlessm.com> Acked-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-29 10:56:42 +00:00
};
pinctrl: meson: separate soc drivers When meson pinctrl is enabled, all meson platforms pinctrl drivers are built in the kernel, with a significant amount of data. This leads to situation where pinctrl drivers targeting an architecture are also compiled and shipped on another one (ex: meson8 - ARM - compiled and shipped on ARM64 builds). This is a waste of memory we can easily avoid. This change makes 4 pinctrl drivers (1 per SoC) out the original single driver, allowing to compile and ship only the ones required. Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-12 12:40:25 +00:00
static const struct of_device_id meson8b_pinctrl_dt_match[] = {
{
.compatible = "amlogic,meson8b-cbus-pinctrl",
.data = &meson8b_cbus_pinctrl_data,
},
{
.compatible = "amlogic,meson8b-aobus-pinctrl",
.data = &meson8b_aobus_pinctrl_data,
},
{ },
};
static struct platform_driver meson8b_pinctrl_driver = {
.probe = meson_pinctrl_probe,
.driver = {
.name = "meson8b-pinctrl",
.of_match_table = meson8b_pinctrl_dt_match,
},
};
builtin_platform_driver(meson8b_pinctrl_driver);
Reference in New Issue Copy Permalink