linux/fs/xfs/libxfs/xfs_attr.c

1459 lines
36 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2000-2005 Silicon Graphics, Inc.
* All Rights Reserved.
*/
#include "xfs.h"
#include "xfs_fs.h"
#include "xfs_shared.h"
#include "xfs_format.h"
#include "xfs_log_format.h"
#include "xfs_trans_resv.h"
#include "xfs_mount.h"
#include "xfs_defer.h"
#include "xfs_da_format.h"
#include "xfs_da_btree.h"
#include "xfs_attr_sf.h"
#include "xfs_inode.h"
#include "xfs_trans.h"
#include "xfs_bmap.h"
#include "xfs_bmap_btree.h"
#include "xfs_attr.h"
#include "xfs_attr_leaf.h"
#include "xfs_attr_remote.h"
#include "xfs_quota.h"
#include "xfs_trans_space.h"
xfs: event tracing support Convert the old xfs tracing support that could only be used with the out of tree kdb and xfsidbg patches to use the generic event tracer. To use it make sure CONFIG_EVENT_TRACING is enabled and then enable all xfs trace channels by: echo 1 > /sys/kernel/debug/tracing/events/xfs/enable or alternatively enable single events by just doing the same in one event subdirectory, e.g. echo 1 > /sys/kernel/debug/tracing/events/xfs/xfs_ihold/enable or set more complex filters, etc. In Documentation/trace/events.txt all this is desctribed in more detail. To reads the events do a cat /sys/kernel/debug/tracing/trace Compared to the last posting this patch converts the tracing mostly to the one tracepoint per callsite model that other users of the new tracing facility also employ. This allows a very fine-grained control of the tracing, a cleaner output of the traces and also enables the perf tool to use each tracepoint as a virtual performance counter, allowing us to e.g. count how often certain workloads git various spots in XFS. Take a look at http://lwn.net/Articles/346470/ for some examples. Also the btree tracing isn't included at all yet, as it will require additional core tracing features not in mainline yet, I plan to deliver it later. And the really nice thing about this patch is that it actually removes many lines of code while adding this nice functionality: fs/xfs/Makefile | 8 fs/xfs/linux-2.6/xfs_acl.c | 1 fs/xfs/linux-2.6/xfs_aops.c | 52 - fs/xfs/linux-2.6/xfs_aops.h | 2 fs/xfs/linux-2.6/xfs_buf.c | 117 +-- fs/xfs/linux-2.6/xfs_buf.h | 33 fs/xfs/linux-2.6/xfs_fs_subr.c | 3 fs/xfs/linux-2.6/xfs_ioctl.c | 1 fs/xfs/linux-2.6/xfs_ioctl32.c | 1 fs/xfs/linux-2.6/xfs_iops.c | 1 fs/xfs/linux-2.6/xfs_linux.h | 1 fs/xfs/linux-2.6/xfs_lrw.c | 87 -- fs/xfs/linux-2.6/xfs_lrw.h | 45 - fs/xfs/linux-2.6/xfs_super.c | 104 --- fs/xfs/linux-2.6/xfs_super.h | 7 fs/xfs/linux-2.6/xfs_sync.c | 1 fs/xfs/linux-2.6/xfs_trace.c | 75 ++ fs/xfs/linux-2.6/xfs_trace.h | 1369 +++++++++++++++++++++++++++++++++++++++++ fs/xfs/linux-2.6/xfs_vnode.h | 4 fs/xfs/quota/xfs_dquot.c | 110 --- fs/xfs/quota/xfs_dquot.h | 21 fs/xfs/quota/xfs_qm.c | 40 - fs/xfs/quota/xfs_qm_syscalls.c | 4 fs/xfs/support/ktrace.c | 323 --------- fs/xfs/support/ktrace.h | 85 -- fs/xfs/xfs.h | 16 fs/xfs/xfs_ag.h | 14 fs/xfs/xfs_alloc.c | 230 +----- fs/xfs/xfs_alloc.h | 27 fs/xfs/xfs_alloc_btree.c | 1 fs/xfs/xfs_attr.c | 107 --- fs/xfs/xfs_attr.h | 10 fs/xfs/xfs_attr_leaf.c | 14 fs/xfs/xfs_attr_sf.h | 40 - fs/xfs/xfs_bmap.c | 507 +++------------ fs/xfs/xfs_bmap.h | 49 - fs/xfs/xfs_bmap_btree.c | 6 fs/xfs/xfs_btree.c | 5 fs/xfs/xfs_btree_trace.h | 17 fs/xfs/xfs_buf_item.c | 87 -- fs/xfs/xfs_buf_item.h | 20 fs/xfs/xfs_da_btree.c | 3 fs/xfs/xfs_da_btree.h | 7 fs/xfs/xfs_dfrag.c | 2 fs/xfs/xfs_dir2.c | 8 fs/xfs/xfs_dir2_block.c | 20 fs/xfs/xfs_dir2_leaf.c | 21 fs/xfs/xfs_dir2_node.c | 27 fs/xfs/xfs_dir2_sf.c | 26 fs/xfs/xfs_dir2_trace.c | 216 ------ fs/xfs/xfs_dir2_trace.h | 72 -- fs/xfs/xfs_filestream.c | 8 fs/xfs/xfs_fsops.c | 2 fs/xfs/xfs_iget.c | 111 --- fs/xfs/xfs_inode.c | 67 -- fs/xfs/xfs_inode.h | 76 -- fs/xfs/xfs_inode_item.c | 5 fs/xfs/xfs_iomap.c | 85 -- fs/xfs/xfs_iomap.h | 8 fs/xfs/xfs_log.c | 181 +---- fs/xfs/xfs_log_priv.h | 20 fs/xfs/xfs_log_recover.c | 1 fs/xfs/xfs_mount.c | 2 fs/xfs/xfs_quota.h | 8 fs/xfs/xfs_rename.c | 1 fs/xfs/xfs_rtalloc.c | 1 fs/xfs/xfs_rw.c | 3 fs/xfs/xfs_trans.h | 47 + fs/xfs/xfs_trans_buf.c | 62 - fs/xfs/xfs_vnodeops.c | 8 70 files changed, 2151 insertions(+), 2592 deletions(-) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-14 23:14:59 +00:00
#include "xfs_trace.h"
/*
* xfs_attr.c
*
* Provide the external interfaces to manage attribute lists.
*/
/*========================================================================
* Function prototypes for the kernel.
*========================================================================*/
/*
* Internal routines when attribute list fits inside the inode.
*/
STATIC int xfs_attr_shortform_addname(xfs_da_args_t *args);
/*
* Internal routines when attribute list is one block.
*/
STATIC int xfs_attr_leaf_get(xfs_da_args_t *args);
STATIC int xfs_attr_leaf_addname(xfs_da_args_t *args);
STATIC int xfs_attr_leaf_removename(xfs_da_args_t *args);
STATIC int xfs_attr_leaf_hasname(struct xfs_da_args *args, struct xfs_buf **bp);
/*
* Internal routines when attribute list is more than one block.
*/
STATIC int xfs_attr_node_get(xfs_da_args_t *args);
STATIC int xfs_attr_node_addname(xfs_da_args_t *args);
STATIC int xfs_attr_node_removename(xfs_da_args_t *args);
STATIC int xfs_attr_node_hasname(xfs_da_args_t *args,
struct xfs_da_state **state);
STATIC int xfs_attr_fillstate(xfs_da_state_t *state);
STATIC int xfs_attr_refillstate(xfs_da_state_t *state);
int
xfs_inode_hasattr(
struct xfs_inode *ip)
{
if (!XFS_IFORK_Q(ip) ||
(ip->i_afp->if_format == XFS_DINODE_FMT_EXTENTS &&
ip->i_afp->if_nextents == 0))
return 0;
return 1;
}
/*========================================================================
* Overall external interface routines.
*========================================================================*/
/*
* Retrieve an extended attribute and its value. Must have ilock.
* Returns 0 on successful retrieval, otherwise an error.
*/
int
xfs_attr_get_ilocked(
struct xfs_da_args *args)
{
ASSERT(xfs_isilocked(args->dp, XFS_ILOCK_SHARED | XFS_ILOCK_EXCL));
if (!xfs_inode_hasattr(args->dp))
return -ENOATTR;
if (args->dp->i_afp->if_format == XFS_DINODE_FMT_LOCAL)
return xfs_attr_shortform_getvalue(args);
if (xfs_bmap_one_block(args->dp, XFS_ATTR_FORK))
return xfs_attr_leaf_get(args);
return xfs_attr_node_get(args);
}
xfs: allocate xattr buffer on demand When doing file lookups and checking for permissions, we end up in xfs_get_acl() to see if there are any ACLs on the inode. This requires and xattr lookup, and to do that we have to supply a buffer large enough to hold an maximum sized xattr. On workloads were we are accessing a wide range of cache cold files under memory pressure (e.g. NFS fileservers) we end up spending a lot of time allocating the buffer. The buffer is 64k in length, so is a contiguous multi-page allocation, and if that then fails we fall back to vmalloc(). Hence the allocation here is /expensive/ when we are looking up hundreds of thousands of files a second. Initial numbers from a bpf trace show average time in xfs_get_acl() is ~32us, with ~19us of that in the memory allocation. Note these are average times, so there are going to be affected by the worst case allocations more than the common fast case... To avoid this, we could just do a "null" lookup to see if the ACL xattr exists and then only do the allocation if it exists. This, however, optimises the path for the "no ACL present" case at the expense of the "acl present" case. i.e. we can halve the time in xfs_get_acl() for the no acl case (i.e down to ~10-15us), but that then increases the ACL case by 30% (i.e. up to 40-45us). To solve this and speed up both cases, drive the xattr buffer allocation into the attribute code once we know what the actual xattr length is. For the no-xattr case, we avoid the allocation completely, speeding up that case. For the common ACL case, we'll end up with a fast heap allocation (because it'll be smaller than a page), and only for the rarer "we have a remote xattr" will we have a multi-page allocation occur. Hence the common ACL case will be much faster, too. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-08-29 16:04:10 +00:00
/*
* Retrieve an extended attribute by name, and its value if requested.
*
* If args->valuelen is zero, then the caller does not want the value, just an
* indication whether the attribute exists and the size of the value if it
* exists. The size is returned in args.valuelen.
xfs: allocate xattr buffer on demand When doing file lookups and checking for permissions, we end up in xfs_get_acl() to see if there are any ACLs on the inode. This requires and xattr lookup, and to do that we have to supply a buffer large enough to hold an maximum sized xattr. On workloads were we are accessing a wide range of cache cold files under memory pressure (e.g. NFS fileservers) we end up spending a lot of time allocating the buffer. The buffer is 64k in length, so is a contiguous multi-page allocation, and if that then fails we fall back to vmalloc(). Hence the allocation here is /expensive/ when we are looking up hundreds of thousands of files a second. Initial numbers from a bpf trace show average time in xfs_get_acl() is ~32us, with ~19us of that in the memory allocation. Note these are average times, so there are going to be affected by the worst case allocations more than the common fast case... To avoid this, we could just do a "null" lookup to see if the ACL xattr exists and then only do the allocation if it exists. This, however, optimises the path for the "no ACL present" case at the expense of the "acl present" case. i.e. we can halve the time in xfs_get_acl() for the no acl case (i.e down to ~10-15us), but that then increases the ACL case by 30% (i.e. up to 40-45us). To solve this and speed up both cases, drive the xattr buffer allocation into the attribute code once we know what the actual xattr length is. For the no-xattr case, we avoid the allocation completely, speeding up that case. For the common ACL case, we'll end up with a fast heap allocation (because it'll be smaller than a page), and only for the rarer "we have a remote xattr" will we have a multi-page allocation occur. Hence the common ACL case will be much faster, too. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-08-29 16:04:10 +00:00
*
* If args->value is NULL but args->valuelen is non-zero, allocate the buffer
* for the value after existence of the attribute has been determined. The
* caller always has to free args->value if it is set, no matter if this
* function was successful or not.
*
xfs: allocate xattr buffer on demand When doing file lookups and checking for permissions, we end up in xfs_get_acl() to see if there are any ACLs on the inode. This requires and xattr lookup, and to do that we have to supply a buffer large enough to hold an maximum sized xattr. On workloads were we are accessing a wide range of cache cold files under memory pressure (e.g. NFS fileservers) we end up spending a lot of time allocating the buffer. The buffer is 64k in length, so is a contiguous multi-page allocation, and if that then fails we fall back to vmalloc(). Hence the allocation here is /expensive/ when we are looking up hundreds of thousands of files a second. Initial numbers from a bpf trace show average time in xfs_get_acl() is ~32us, with ~19us of that in the memory allocation. Note these are average times, so there are going to be affected by the worst case allocations more than the common fast case... To avoid this, we could just do a "null" lookup to see if the ACL xattr exists and then only do the allocation if it exists. This, however, optimises the path for the "no ACL present" case at the expense of the "acl present" case. i.e. we can halve the time in xfs_get_acl() for the no acl case (i.e down to ~10-15us), but that then increases the ACL case by 30% (i.e. up to 40-45us). To solve this and speed up both cases, drive the xattr buffer allocation into the attribute code once we know what the actual xattr length is. For the no-xattr case, we avoid the allocation completely, speeding up that case. For the common ACL case, we'll end up with a fast heap allocation (because it'll be smaller than a page), and only for the rarer "we have a remote xattr" will we have a multi-page allocation occur. Hence the common ACL case will be much faster, too. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-08-29 16:04:10 +00:00
* If the attribute is found, but exceeds the size limit set by the caller in
* args->valuelen, return -ERANGE with the size of the attribute that was found
* in args->valuelen.
xfs: allocate xattr buffer on demand When doing file lookups and checking for permissions, we end up in xfs_get_acl() to see if there are any ACLs on the inode. This requires and xattr lookup, and to do that we have to supply a buffer large enough to hold an maximum sized xattr. On workloads were we are accessing a wide range of cache cold files under memory pressure (e.g. NFS fileservers) we end up spending a lot of time allocating the buffer. The buffer is 64k in length, so is a contiguous multi-page allocation, and if that then fails we fall back to vmalloc(). Hence the allocation here is /expensive/ when we are looking up hundreds of thousands of files a second. Initial numbers from a bpf trace show average time in xfs_get_acl() is ~32us, with ~19us of that in the memory allocation. Note these are average times, so there are going to be affected by the worst case allocations more than the common fast case... To avoid this, we could just do a "null" lookup to see if the ACL xattr exists and then only do the allocation if it exists. This, however, optimises the path for the "no ACL present" case at the expense of the "acl present" case. i.e. we can halve the time in xfs_get_acl() for the no acl case (i.e down to ~10-15us), but that then increases the ACL case by 30% (i.e. up to 40-45us). To solve this and speed up both cases, drive the xattr buffer allocation into the attribute code once we know what the actual xattr length is. For the no-xattr case, we avoid the allocation completely, speeding up that case. For the common ACL case, we'll end up with a fast heap allocation (because it'll be smaller than a page), and only for the rarer "we have a remote xattr" will we have a multi-page allocation occur. Hence the common ACL case will be much faster, too. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-08-29 16:04:10 +00:00
*/
int
xfs_attr_get(
struct xfs_da_args *args)
{
uint lock_mode;
int error;
XFS_STATS_INC(args->dp->i_mount, xs_attr_get);
if (XFS_FORCED_SHUTDOWN(args->dp->i_mount))
return -EIO;
args->geo = args->dp->i_mount->m_attr_geo;
args->whichfork = XFS_ATTR_FORK;
args->hashval = xfs_da_hashname(args->name, args->namelen);
/* Entirely possible to look up a name which doesn't exist */
args->op_flags = XFS_DA_OP_OKNOENT;
lock_mode = xfs_ilock_attr_map_shared(args->dp);
error = xfs_attr_get_ilocked(args);
xfs_iunlock(args->dp, lock_mode);
xfs: allocate xattr buffer on demand When doing file lookups and checking for permissions, we end up in xfs_get_acl() to see if there are any ACLs on the inode. This requires and xattr lookup, and to do that we have to supply a buffer large enough to hold an maximum sized xattr. On workloads were we are accessing a wide range of cache cold files under memory pressure (e.g. NFS fileservers) we end up spending a lot of time allocating the buffer. The buffer is 64k in length, so is a contiguous multi-page allocation, and if that then fails we fall back to vmalloc(). Hence the allocation here is /expensive/ when we are looking up hundreds of thousands of files a second. Initial numbers from a bpf trace show average time in xfs_get_acl() is ~32us, with ~19us of that in the memory allocation. Note these are average times, so there are going to be affected by the worst case allocations more than the common fast case... To avoid this, we could just do a "null" lookup to see if the ACL xattr exists and then only do the allocation if it exists. This, however, optimises the path for the "no ACL present" case at the expense of the "acl present" case. i.e. we can halve the time in xfs_get_acl() for the no acl case (i.e down to ~10-15us), but that then increases the ACL case by 30% (i.e. up to 40-45us). To solve this and speed up both cases, drive the xattr buffer allocation into the attribute code once we know what the actual xattr length is. For the no-xattr case, we avoid the allocation completely, speeding up that case. For the common ACL case, we'll end up with a fast heap allocation (because it'll be smaller than a page), and only for the rarer "we have a remote xattr" will we have a multi-page allocation occur. Hence the common ACL case will be much faster, too. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-08-29 16:04:10 +00:00
return error;
}
/*
* Calculate how many blocks we need for the new attribute,
*/
STATIC int
xfs_attr_calc_size(
struct xfs_da_args *args,
int *local)
{
struct xfs_mount *mp = args->dp->i_mount;
int size;
int nblks;
/*
* Determine space new attribute will use, and if it would be
* "local" or "remote" (note: local != inline).
*/
size = xfs_attr_leaf_newentsize(args, local);
nblks = XFS_DAENTER_SPACE_RES(mp, XFS_ATTR_FORK);
if (*local) {
if (size > (args->geo->blksize / 2)) {
/* Double split possible */
nblks *= 2;
}
} else {
/*
* Out of line attribute, cannot double split, but
* make room for the attribute value itself.
*/
uint dblocks = xfs_attr3_rmt_blocks(mp, args->valuelen);
nblks += dblocks;
nblks += XFS_NEXTENTADD_SPACE_RES(mp, dblocks, XFS_ATTR_FORK);
}
return nblks;
}
STATIC int
xfs_attr_try_sf_addname(
struct xfs_inode *dp,
struct xfs_da_args *args)
{
int error;
/*
* Build initial attribute list (if required).
*/
if (dp->i_afp->if_format == XFS_DINODE_FMT_EXTENTS)
xfs_attr_shortform_create(args);
error = xfs_attr_shortform_addname(args);
if (error == -ENOSPC)
return error;
/*
* Commit the shortform mods, and we're done.
* NOTE: this is also the error path (EEXIST, etc).
*/
if (!error && !(args->op_flags & XFS_DA_OP_NOTIME))
xfs_trans_ichgtime(args->trans, dp, XFS_ICHGTIME_CHG);
if (dp->i_mount->m_flags & XFS_MOUNT_WSYNC)
xfs_trans_set_sync(args->trans);
return error;
}
/*
* Check to see if the attr should be upgraded from non-existent or shortform to
* single-leaf-block attribute list.
*/
static inline bool
xfs_attr_is_shortform(
struct xfs_inode *ip)
{
return ip->i_afp->if_format == XFS_DINODE_FMT_LOCAL ||
(ip->i_afp->if_format == XFS_DINODE_FMT_EXTENTS &&
ip->i_afp->if_nextents == 0);
}
/*
* Attempts to set an attr in shortform, or converts short form to leaf form if
* there is not enough room. If the attr is set, the transaction is committed
* and set to NULL.
*/
STATIC int
xfs_attr_set_shortform(
struct xfs_da_args *args,
struct xfs_buf **leaf_bp)
{
struct xfs_inode *dp = args->dp;
int error, error2 = 0;
/*
* Try to add the attr to the attribute list in the inode.
*/
error = xfs_attr_try_sf_addname(dp, args);
if (error != -ENOSPC) {
error2 = xfs_trans_commit(args->trans);
args->trans = NULL;
return error ? error : error2;
}
/*
* It won't fit in the shortform, transform to a leaf block. GROT:
* another possible req'mt for a double-split btree op.
*/
error = xfs_attr_shortform_to_leaf(args, leaf_bp);
if (error)
return error;
/*
* Prevent the leaf buffer from being unlocked so that a concurrent AIL
* push cannot grab the half-baked leaf buffer and run into problems
* with the write verifier. Once we're done rolling the transaction we
* can release the hold and add the attr to the leaf.
*/
xfs_trans_bhold(args->trans, *leaf_bp);
error = xfs_defer_finish(&args->trans);
xfs_trans_bhold_release(args->trans, *leaf_bp);
if (error) {
xfs_trans_brelse(args->trans, *leaf_bp);
return error;
}
return 0;
}
/*
* Set the attribute specified in @args.
*/
int
xfs_attr_set_args(
struct xfs_da_args *args)
{
struct xfs_inode *dp = args->dp;
struct xfs_buf *leaf_bp = NULL;
int error = 0;
/*
* If the attribute list is already in leaf format, jump straight to
* leaf handling. Otherwise, try to add the attribute to the shortform
* list; if there's no room then convert the list to leaf format and try
* again.
*/
if (xfs_attr_is_shortform(dp)) {
/*
* If the attr was successfully set in shortform, the
* transaction is committed and set to NULL. Otherwise, is it
* converted from shortform to leaf, and the transaction is
* retained.
*/
error = xfs_attr_set_shortform(args, &leaf_bp);
if (error || !args->trans)
return error;
}
if (xfs_bmap_one_block(dp, XFS_ATTR_FORK)) {
error = xfs_attr_leaf_addname(args);
if (error != -ENOSPC)
return error;
/*
* Promote the attribute list to the Btree format.
*/
error = xfs_attr3_leaf_to_node(args);
if (error)
return error;
/*
* Finish any deferred work items and roll the transaction once
* more. The goal here is to call node_addname with the inode
* and transaction in the same state (inode locked and joined,
* transaction clean) no matter how we got to this step.
*/
error = xfs_defer_finish(&args->trans);
if (error)
return error;
/*
* Commit the current trans (including the inode) and
* start a new one.
*/
error = xfs_trans_roll_inode(&args->trans, dp);
if (error)
return error;
}
error = xfs_attr_node_addname(args);
return error;
}
/*
* Return EEXIST if attr is found, or ENOATTR if not
*/
int
xfs_has_attr(
struct xfs_da_args *args)
{
struct xfs_inode *dp = args->dp;
struct xfs_buf *bp = NULL;
int error;
if (!xfs_inode_hasattr(dp))
return -ENOATTR;
if (dp->i_afp->if_format == XFS_DINODE_FMT_LOCAL) {
ASSERT(dp->i_afp->if_flags & XFS_IFINLINE);
return xfs_attr_sf_findname(args, NULL, NULL);
}
if (xfs_bmap_one_block(dp, XFS_ATTR_FORK)) {
error = xfs_attr_leaf_hasname(args, &bp);
if (bp)
xfs_trans_brelse(args->trans, bp);
return error;
}
return xfs_attr_node_hasname(args, NULL);
}
/*
* Remove the attribute specified in @args.
*/
int
xfs_attr_remove_args(
struct xfs_da_args *args)
{
struct xfs_inode *dp = args->dp;
int error;
if (!xfs_inode_hasattr(dp)) {
error = -ENOATTR;
} else if (dp->i_afp->if_format == XFS_DINODE_FMT_LOCAL) {
ASSERT(dp->i_afp->if_flags & XFS_IFINLINE);
error = xfs_attr_shortform_remove(args);
} else if (xfs_bmap_one_block(dp, XFS_ATTR_FORK)) {
error = xfs_attr_leaf_removename(args);
} else {
error = xfs_attr_node_removename(args);
}
return error;
}
/*
* Note: If args->value is NULL the attribute will be removed, just like the
* Linux ->setattr API.
*/
int
xfs_attr_set(
struct xfs_da_args *args)
{
struct xfs_inode *dp = args->dp;
struct xfs_mount *mp = dp->i_mount;
struct xfs_trans_res tres;
bool rsvd = (args->attr_filter & XFS_ATTR_ROOT);
int error, local;
unsigned int total;
if (XFS_FORCED_SHUTDOWN(dp->i_mount))
return -EIO;
error = xfs_qm_dqattach(dp);
if (error)
return error;
args->geo = mp->m_attr_geo;
args->whichfork = XFS_ATTR_FORK;
args->hashval = xfs_da_hashname(args->name, args->namelen);
/*
* We have no control over the attribute names that userspace passes us
* to remove, so we have to allow the name lookup prior to attribute
* removal to fail as well.
*/
args->op_flags = XFS_DA_OP_OKNOENT;
if (args->value) {
XFS_STATS_INC(mp, xs_attr_set);
args->op_flags |= XFS_DA_OP_ADDNAME;
args->total = xfs_attr_calc_size(args, &local);
/*
* If the inode doesn't have an attribute fork, add one.
* (inode must not be locked when we call this routine)
*/
if (XFS_IFORK_Q(dp) == 0) {
int sf_size = sizeof(struct xfs_attr_sf_hdr) +
xfs_attr_sf_entsize_byname(args->namelen,
args->valuelen);
error = xfs_bmap_add_attrfork(dp, sf_size, rsvd);
if (error)
return error;
}
tres.tr_logres = M_RES(mp)->tr_attrsetm.tr_logres +
M_RES(mp)->tr_attrsetrt.tr_logres *
args->total;
tres.tr_logcount = XFS_ATTRSET_LOG_COUNT;
tres.tr_logflags = XFS_TRANS_PERM_LOG_RES;
total = args->total;
} else {
XFS_STATS_INC(mp, xs_attr_remove);
tres = M_RES(mp)->tr_attrrm;
total = XFS_ATTRRM_SPACE_RES(mp);
}
/*
* Root fork attributes can use reserved data blocks for this
* operation if necessary
*/
error = xfs_trans_alloc(mp, &tres, total, 0,
rsvd ? XFS_TRANS_RESERVE : 0, &args->trans);
if (error)
return error;
xfs_ilock(dp, XFS_ILOCK_EXCL);
xfs_trans_ijoin(args->trans, dp, 0);
if (args->value) {
unsigned int quota_flags = XFS_QMOPT_RES_REGBLKS;
if (rsvd)
quota_flags |= XFS_QMOPT_FORCE_RES;
error = xfs_trans_reserve_quota_nblks(args->trans, dp,
args->total, 0, quota_flags);
if (error)
goto out_trans_cancel;
error = xfs_has_attr(args);
if (error == -EEXIST && (args->attr_flags & XATTR_CREATE))
goto out_trans_cancel;
if (error == -ENOATTR && (args->attr_flags & XATTR_REPLACE))
goto out_trans_cancel;
if (error != -ENOATTR && error != -EEXIST)
goto out_trans_cancel;
error = xfs_attr_set_args(args);
if (error)
goto out_trans_cancel;
/* shortform attribute has already been committed */
if (!args->trans)
goto out_unlock;
} else {
error = xfs_has_attr(args);
if (error != -EEXIST)
goto out_trans_cancel;
error = xfs_attr_remove_args(args);
if (error)
goto out_trans_cancel;
}
/*
* If this is a synchronous mount, make sure that the
* transaction goes to disk before returning to the user.
*/
if (mp->m_flags & XFS_MOUNT_WSYNC)
xfs_trans_set_sync(args->trans);
if (!(args->op_flags & XFS_DA_OP_NOTIME))
xfs_trans_ichgtime(args->trans, dp, XFS_ICHGTIME_CHG);
/*
* Commit the last in the sequence of transactions.
*/
xfs_trans_log_inode(args->trans, dp, XFS_ILOG_CORE);
error = xfs_trans_commit(args->trans);
out_unlock:
xfs_iunlock(dp, XFS_ILOCK_EXCL);
return error;
out_trans_cancel:
if (args->trans)
xfs_trans_cancel(args->trans);
goto out_unlock;
}
/*========================================================================
* External routines when attribute list is inside the inode
*========================================================================*/
static inline int xfs_attr_sf_totsize(struct xfs_inode *dp)
{
struct xfs_attr_shortform *sf;
sf = (struct xfs_attr_shortform *)dp->i_afp->if_u1.if_data;
return be16_to_cpu(sf->hdr.totsize);
}
/*
* Add a name to the shortform attribute list structure
* This is the external routine.
*/
STATIC int
xfs_attr_shortform_addname(xfs_da_args_t *args)
{
int newsize, forkoff, retval;
trace_xfs_attr_sf_addname(args);
retval = xfs_attr_shortform_lookup(args);
if (retval == -ENOATTR && (args->attr_flags & XATTR_REPLACE))
return retval;
if (retval == -EEXIST) {
if (args->attr_flags & XATTR_CREATE)
return retval;
retval = xfs_attr_shortform_remove(args);
if (retval)
return retval;
/*
* Since we have removed the old attr, clear ATTR_REPLACE so
* that the leaf format add routine won't trip over the attr
* not being around.
*/
args->attr_flags &= ~XATTR_REPLACE;
}
if (args->namelen >= XFS_ATTR_SF_ENTSIZE_MAX ||
args->valuelen >= XFS_ATTR_SF_ENTSIZE_MAX)
return -ENOSPC;
newsize = xfs_attr_sf_totsize(args->dp);
newsize += xfs_attr_sf_entsize_byname(args->namelen, args->valuelen);
forkoff = xfs_attr_shortform_bytesfit(args->dp, newsize);
if (!forkoff)
return -ENOSPC;
xfs_attr_shortform_add(args, forkoff);
return 0;
}
/*========================================================================
* External routines when attribute list is one block
*========================================================================*/
/* Store info about a remote block */
STATIC void
xfs_attr_save_rmt_blk(
struct xfs_da_args *args)
{
args->blkno2 = args->blkno;
args->index2 = args->index;
args->rmtblkno2 = args->rmtblkno;
args->rmtblkcnt2 = args->rmtblkcnt;
args->rmtvaluelen2 = args->rmtvaluelen;
}
/* Set stored info about a remote block */
STATIC void
xfs_attr_restore_rmt_blk(
struct xfs_da_args *args)
{
args->blkno = args->blkno2;
args->index = args->index2;
args->rmtblkno = args->rmtblkno2;
args->rmtblkcnt = args->rmtblkcnt2;
args->rmtvaluelen = args->rmtvaluelen2;
}
/*
* Tries to add an attribute to an inode in leaf form
*
* This function is meant to execute as part of a delayed operation and leaves
* the transaction handling to the caller. On success the attribute is added
* and the inode and transaction are left dirty. If there is not enough space,
* the attr data is converted to node format and -ENOSPC is returned. Caller is
* responsible for handling the dirty inode and transaction or adding the attr
* in node format.
*/
STATIC int
xfs_attr_leaf_try_add(
struct xfs_da_args *args,
struct xfs_buf *bp)
{
int retval;
/*
* Look up the given attribute in the leaf block. Figure out if
* the given flags produce an error or call for an atomic rename.
*/
retval = xfs_attr_leaf_hasname(args, &bp);
if (retval != -ENOATTR && retval != -EEXIST)
return retval;
if (retval == -ENOATTR && (args->attr_flags & XATTR_REPLACE))
goto out_brelse;
if (retval == -EEXIST) {
if (args->attr_flags & XATTR_CREATE)
goto out_brelse;
trace_xfs_attr_leaf_replace(args);
xfs: remote attribute overwrite causes transaction overrun Commit e461fcb ("xfs: remote attribute lookups require the value length") passes the remote attribute length in the xfs_da_args structure on lookup so that CRC calculations and validity checking can be performed correctly by related code. This, unfortunately has the side effect of changing the args->valuelen parameter in cases where it shouldn't. That is, when we replace a remote attribute, the incoming replacement stores the value and length in args->value and args->valuelen, but then the lookup which finds the existing remote attribute overwrites args->valuelen with the length of the remote attribute being replaced. Hence when we go to create the new attribute, we create it of the size of the existing remote attribute, not the size it is supposed to be. When the new attribute is much smaller than the old attribute, this results in a transaction overrun and an ASSERT() failure on a debug kernel: XFS: Assertion failed: tp->t_blk_res_used <= tp->t_blk_res, file: fs/xfs/xfs_trans.c, line: 331 Fix this by keeping the remote attribute value length separate to the attribute value length in the xfs_da_args structure. The enables us to pass the length of the remote attribute to be removed without overwriting the new attribute's length. Also, ensure that when we save remote block contexts for a later rename we zero the original state variables so that we don't confuse the state of the attribute to be removes with the state of the new attribute that we just added. [Spotted by Brain Foster.] Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-05-05 21:37:31 +00:00
/* save the attribute state for later removal*/
args->op_flags |= XFS_DA_OP_RENAME; /* an atomic rename */
xfs_attr_save_rmt_blk(args);
xfs: remote attribute overwrite causes transaction overrun Commit e461fcb ("xfs: remote attribute lookups require the value length") passes the remote attribute length in the xfs_da_args structure on lookup so that CRC calculations and validity checking can be performed correctly by related code. This, unfortunately has the side effect of changing the args->valuelen parameter in cases where it shouldn't. That is, when we replace a remote attribute, the incoming replacement stores the value and length in args->value and args->valuelen, but then the lookup which finds the existing remote attribute overwrites args->valuelen with the length of the remote attribute being replaced. Hence when we go to create the new attribute, we create it of the size of the existing remote attribute, not the size it is supposed to be. When the new attribute is much smaller than the old attribute, this results in a transaction overrun and an ASSERT() failure on a debug kernel: XFS: Assertion failed: tp->t_blk_res_used <= tp->t_blk_res, file: fs/xfs/xfs_trans.c, line: 331 Fix this by keeping the remote attribute value length separate to the attribute value length in the xfs_da_args structure. The enables us to pass the length of the remote attribute to be removed without overwriting the new attribute's length. Also, ensure that when we save remote block contexts for a later rename we zero the original state variables so that we don't confuse the state of the attribute to be removes with the state of the new attribute that we just added. [Spotted by Brain Foster.] Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-05-05 21:37:31 +00:00
/*
* clear the remote attr state now that it is saved so that the
* values reflect the state of the attribute we are about to
* add, not the attribute we just found and will remove later.
*/
args->rmtblkno = 0;
args->rmtblkcnt = 0;
args->rmtvaluelen = 0;
}
/*
* Add the attribute to the leaf block
*/
return xfs_attr3_leaf_add(bp, args);
out_brelse:
xfs_trans_brelse(args->trans, bp);
return retval;
}
/*
* Add a name to the leaf attribute list structure
*
* This leaf block cannot have a "remote" value, we only call this routine
* if bmap_one_block() says there is only one block (ie: no remote blks).
*/
STATIC int
xfs_attr_leaf_addname(
struct xfs_da_args *args)
{
int error, forkoff;
struct xfs_buf *bp = NULL;
struct xfs_inode *dp = args->dp;
trace_xfs_attr_leaf_addname(args);
error = xfs_attr_leaf_try_add(args, bp);
if (error)
return error;
/*
* Commit the transaction that added the attr name so that
* later routines can manage their own transactions.
*/
error = xfs_trans_roll_inode(&args->trans, dp);
if (error)
return error;
/*
* If there was an out-of-line value, allocate the blocks we
* identified for its storage and copy the value. This is done
* after we create the attribute so that we don't overflow the
* maximum size of a transaction and/or hit a deadlock.
*/
if (args->rmtblkno > 0) {
error = xfs_attr_rmtval_set(args);
if (error)
return error;
}
if (!(args->op_flags & XFS_DA_OP_RENAME)) {
/*
* Added a "remote" value, just clear the incomplete flag.
*/
if (args->rmtblkno > 0)
error = xfs_attr3_leaf_clearflag(args);
return error;
}
/*
* If this is an atomic rename operation, we must "flip" the incomplete
* flags on the "new" and "old" attribute/value pairs so that one
* disappears and one appears atomically. Then we must remove the "old"
* attribute/value pair.
*
* In a separate transaction, set the incomplete flag on the "old" attr
* and clear the incomplete flag on the "new" attr.
*/
error = xfs_attr3_leaf_flipflags(args);
if (error)
return error;
/*
* Commit the flag value change and start the next trans in series.
*/
error = xfs_trans_roll_inode(&args->trans, args->dp);
if (error)
return error;
/*
* Dismantle the "old" attribute/value pair by removing a "remote" value
* (if it exists).
*/
xfs_attr_restore_rmt_blk(args);
if (args->rmtblkno) {
error = xfs_attr_rmtval_invalidate(args);
if (error)
return error;
error = xfs_attr_rmtval_remove(args);
if (error)
return error;
}
/*
* Read in the block containing the "old" attr, then remove the "old"
* attr from that block (neat, huh!)
*/
error = xfs_attr3_leaf_read(args->trans, args->dp, args->blkno,
&bp);
if (error)
return error;
xfs_attr3_leaf_remove(bp, args);
/*
* If the result is small enough, shrink it all into the inode.
*/
forkoff = xfs_attr_shortform_allfit(bp, dp);
if (forkoff)
error = xfs_attr3_leaf_to_shortform(bp, args, forkoff);
/* bp is gone due to xfs_da_shrink_inode */
return error;
}
/*
* Return EEXIST if attr is found, or ENOATTR if not
*/
STATIC int
xfs_attr_leaf_hasname(
struct xfs_da_args *args,
struct xfs_buf **bp)
{
int error = 0;
error = xfs_attr3_leaf_read(args->trans, args->dp, 0, bp);
if (error)
return error;
error = xfs_attr3_leaf_lookup_int(*bp, args);
if (error != -ENOATTR && error != -EEXIST)
xfs_trans_brelse(args->trans, *bp);
return error;
}
/*
* Remove a name from the leaf attribute list structure
*
* This leaf block cannot have a "remote" value, we only call this routine
* if bmap_one_block() says there is only one block (ie: no remote blks).
*/
STATIC int
xfs_attr_leaf_removename(
struct xfs_da_args *args)
{
struct xfs_inode *dp;
struct xfs_buf *bp;
int error, forkoff;
trace_xfs_attr_leaf_removename(args);
/*
* Remove the attribute.
*/
dp = args->dp;
error = xfs_attr_leaf_hasname(args, &bp);
if (error == -ENOATTR) {
xfs_trans_brelse(args->trans, bp);
return error;
} else if (error != -EEXIST)
return error;
xfs_attr3_leaf_remove(bp, args);
/*
* If the result is small enough, shrink it all into the inode.
*/
forkoff = xfs_attr_shortform_allfit(bp, dp);
if (forkoff)
return xfs_attr3_leaf_to_shortform(bp, args, forkoff);
/* bp is gone due to xfs_da_shrink_inode */
return 0;
}
/*
* Look up a name in a leaf attribute list structure.
*
* This leaf block cannot have a "remote" value, we only call this routine
* if bmap_one_block() says there is only one block (ie: no remote blks).
*
* Returns 0 on successful retrieval, otherwise an error.
*/
STATIC int
xfs_attr_leaf_get(xfs_da_args_t *args)
{
struct xfs_buf *bp;
int error;
trace_xfs_attr_leaf_get(args);
error = xfs_attr_leaf_hasname(args, &bp);
if (error == -ENOATTR) {
xfs_trans_brelse(args->trans, bp);
return error;
} else if (error != -EEXIST)
return error;
error = xfs_attr3_leaf_getvalue(bp, args);
xfs_trans_brelse(args->trans, bp);
return error;
}
/*
* Return EEXIST if attr is found, or ENOATTR if not
* statep: If not null is set to point at the found state. Caller will
* be responsible for freeing the state in this case.
*/
STATIC int
xfs_attr_node_hasname(
struct xfs_da_args *args,
struct xfs_da_state **statep)
{
struct xfs_da_state *state;
int retval, error;
state = xfs_da_state_alloc(args);
if (statep != NULL)
*statep = NULL;
/*
* Search to see if name exists, and get back a pointer to it.
*/
error = xfs_da3_node_lookup_int(state, &retval);
if (error) {
xfs_da_state_free(state);
return error;
}
if (statep != NULL)
*statep = state;
else
xfs_da_state_free(state);
return retval;
}
/*========================================================================
* External routines when attribute list size > geo->blksize
*========================================================================*/
/*
* Add a name to a Btree-format attribute list.
*
* This will involve walking down the Btree, and may involve splitting
* leaf nodes and even splitting intermediate nodes up to and including
* the root node (a special case of an intermediate node).
*
* "Remote" attribute values confuse the issue and atomic rename operations
* add a whole extra layer of confusion on top of that.
*/
STATIC int
xfs_attr_node_addname(
struct xfs_da_args *args)
{
struct xfs_da_state *state;
struct xfs_da_state_blk *blk;
struct xfs_inode *dp;
int retval, error;
trace_xfs_attr_node_addname(args);
/*
* Fill in bucket of arguments/results/context to carry around.
*/
dp = args->dp;
restart:
/*
* Search to see if name already exists, and get back a pointer
* to where it should go.
*/
retval = xfs_attr_node_hasname(args, &state);
if (retval != -ENOATTR && retval != -EEXIST)
goto out;
blk = &state->path.blk[ state->path.active-1 ];
ASSERT(blk->magic == XFS_ATTR_LEAF_MAGIC);
if (retval == -ENOATTR && (args->attr_flags & XATTR_REPLACE))
goto out;
if (retval == -EEXIST) {
if (args->attr_flags & XATTR_CREATE)
goto out;
trace_xfs_attr_node_replace(args);
xfs: remote attribute overwrite causes transaction overrun Commit e461fcb ("xfs: remote attribute lookups require the value length") passes the remote attribute length in the xfs_da_args structure on lookup so that CRC calculations and validity checking can be performed correctly by related code. This, unfortunately has the side effect of changing the args->valuelen parameter in cases where it shouldn't. That is, when we replace a remote attribute, the incoming replacement stores the value and length in args->value and args->valuelen, but then the lookup which finds the existing remote attribute overwrites args->valuelen with the length of the remote attribute being replaced. Hence when we go to create the new attribute, we create it of the size of the existing remote attribute, not the size it is supposed to be. When the new attribute is much smaller than the old attribute, this results in a transaction overrun and an ASSERT() failure on a debug kernel: XFS: Assertion failed: tp->t_blk_res_used <= tp->t_blk_res, file: fs/xfs/xfs_trans.c, line: 331 Fix this by keeping the remote attribute value length separate to the attribute value length in the xfs_da_args structure. The enables us to pass the length of the remote attribute to be removed without overwriting the new attribute's length. Also, ensure that when we save remote block contexts for a later rename we zero the original state variables so that we don't confuse the state of the attribute to be removes with the state of the new attribute that we just added. [Spotted by Brain Foster.] Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-05-05 21:37:31 +00:00
/* save the attribute state for later removal*/
args->op_flags |= XFS_DA_OP_RENAME; /* atomic rename op */
xfs_attr_save_rmt_blk(args);
xfs: remote attribute overwrite causes transaction overrun Commit e461fcb ("xfs: remote attribute lookups require the value length") passes the remote attribute length in the xfs_da_args structure on lookup so that CRC calculations and validity checking can be performed correctly by related code. This, unfortunately has the side effect of changing the args->valuelen parameter in cases where it shouldn't. That is, when we replace a remote attribute, the incoming replacement stores the value and length in args->value and args->valuelen, but then the lookup which finds the existing remote attribute overwrites args->valuelen with the length of the remote attribute being replaced. Hence when we go to create the new attribute, we create it of the size of the existing remote attribute, not the size it is supposed to be. When the new attribute is much smaller than the old attribute, this results in a transaction overrun and an ASSERT() failure on a debug kernel: XFS: Assertion failed: tp->t_blk_res_used <= tp->t_blk_res, file: fs/xfs/xfs_trans.c, line: 331 Fix this by keeping the remote attribute value length separate to the attribute value length in the xfs_da_args structure. The enables us to pass the length of the remote attribute to be removed without overwriting the new attribute's length. Also, ensure that when we save remote block contexts for a later rename we zero the original state variables so that we don't confuse the state of the attribute to be removes with the state of the new attribute that we just added. [Spotted by Brain Foster.] Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-05-05 21:37:31 +00:00
/*
* clear the remote attr state now that it is saved so that the
* values reflect the state of the attribute we are about to
* add, not the attribute we just found and will remove later.
*/
args->rmtblkno = 0;
args->rmtblkcnt = 0;
xfs: remote attribute overwrite causes transaction overrun Commit e461fcb ("xfs: remote attribute lookups require the value length") passes the remote attribute length in the xfs_da_args structure on lookup so that CRC calculations and validity checking can be performed correctly by related code. This, unfortunately has the side effect of changing the args->valuelen parameter in cases where it shouldn't. That is, when we replace a remote attribute, the incoming replacement stores the value and length in args->value and args->valuelen, but then the lookup which finds the existing remote attribute overwrites args->valuelen with the length of the remote attribute being replaced. Hence when we go to create the new attribute, we create it of the size of the existing remote attribute, not the size it is supposed to be. When the new attribute is much smaller than the old attribute, this results in a transaction overrun and an ASSERT() failure on a debug kernel: XFS: Assertion failed: tp->t_blk_res_used <= tp->t_blk_res, file: fs/xfs/xfs_trans.c, line: 331 Fix this by keeping the remote attribute value length separate to the attribute value length in the xfs_da_args structure. The enables us to pass the length of the remote attribute to be removed without overwriting the new attribute's length. Also, ensure that when we save remote block contexts for a later rename we zero the original state variables so that we don't confuse the state of the attribute to be removes with the state of the new attribute that we just added. [Spotted by Brain Foster.] Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-05-05 21:37:31 +00:00
args->rmtvaluelen = 0;
}
retval = xfs_attr3_leaf_add(blk->bp, state->args);
if (retval == -ENOSPC) {
if (state->path.active == 1) {
/*
* Its really a single leaf node, but it had
* out-of-line values so it looked like it *might*
* have been a b-tree.
*/
xfs_da_state_free(state);
state = NULL;
error = xfs_attr3_leaf_to_node(args);
if (error)
goto out;
error = xfs_defer_finish(&args->trans);
if (error)
goto out;
/*
* Commit the node conversion and start the next
* trans in the chain.
*/
error = xfs_trans_roll_inode(&args->trans, dp);
if (error)
goto out;
goto restart;
}
/*
* Split as many Btree elements as required.
* This code tracks the new and old attr's location
* in the index/blkno/rmtblkno/rmtblkcnt fields and
* in the index2/blkno2/rmtblkno2/rmtblkcnt2 fields.
*/
error = xfs_da3_split(state);
if (error)
goto out;
error = xfs_defer_finish(&args->trans);
if (error)
goto out;
} else {
/*
* Addition succeeded, update Btree hashvals.
*/
xfs_da3_fixhashpath(state, &state->path);
}
/*
* Kill the state structure, we're done with it and need to
* allow the buffers to come back later.
*/
xfs_da_state_free(state);
state = NULL;
/*
* Commit the leaf addition or btree split and start the next
* trans in the chain.
*/
error = xfs_trans_roll_inode(&args->trans, dp);
if (error)
goto out;
/*
* If there was an out-of-line value, allocate the blocks we
* identified for its storage and copy the value. This is done
* after we create the attribute so that we don't overflow the
* maximum size of a transaction and/or hit a deadlock.
*/
if (args->rmtblkno > 0) {
error = xfs_attr_rmtval_set(args);
if (error)
return error;
}
if (!(args->op_flags & XFS_DA_OP_RENAME)) {
/*
* Added a "remote" value, just clear the incomplete flag.
*/
if (args->rmtblkno > 0)
error = xfs_attr3_leaf_clearflag(args);
retval = error;
goto out;
}
/*
* If this is an atomic rename operation, we must "flip" the incomplete
* flags on the "new" and "old" attribute/value pairs so that one
* disappears and one appears atomically. Then we must remove the "old"
* attribute/value pair.
*
* In a separate transaction, set the incomplete flag on the "old" attr
* and clear the incomplete flag on the "new" attr.
*/
error = xfs_attr3_leaf_flipflags(args);
if (error)
goto out;
/*
* Commit the flag value change and start the next trans in series
*/
error = xfs_trans_roll_inode(&args->trans, args->dp);
if (error)
goto out;
/*
* Dismantle the "old" attribute/value pair by removing a "remote" value
* (if it exists).
*/
xfs_attr_restore_rmt_blk(args);
if (args->rmtblkno) {
error = xfs_attr_rmtval_invalidate(args);
if (error)
return error;
error = xfs_attr_rmtval_remove(args);
if (error)
return error;
}
/*
* Re-find the "old" attribute entry after any split ops. The INCOMPLETE
* flag means that we will find the "old" attr, not the "new" one.
*/
args->attr_filter |= XFS_ATTR_INCOMPLETE;
state = xfs_da_state_alloc(args);
state->inleaf = 0;
error = xfs_da3_node_lookup_int(state, &retval);
if (error)
goto out;
/*
* Remove the name and update the hashvals in the tree.
*/
blk = &state->path.blk[state->path.active-1];
ASSERT(blk->magic == XFS_ATTR_LEAF_MAGIC);
error = xfs_attr3_leaf_remove(blk->bp, args);
xfs_da3_fixhashpath(state, &state->path);
/*
* Check to see if the tree needs to be collapsed.
*/
if (retval && (state->path.active > 1)) {
error = xfs_da3_join(state);
if (error)
goto out;
}
retval = error = 0;
out:
if (state)
xfs_da_state_free(state);
if (error)
return error;
return retval;
}
/*
* Shrink an attribute from leaf to shortform
*/
STATIC int
xfs_attr_node_shrink(
struct xfs_da_args *args,
struct xfs_da_state *state)
{
struct xfs_inode *dp = args->dp;
int error, forkoff;
struct xfs_buf *bp;
/*
* Have to get rid of the copy of this dabuf in the state.
*/
ASSERT(state->path.active == 1);
ASSERT(state->path.blk[0].bp);
state->path.blk[0].bp = NULL;
error = xfs_attr3_leaf_read(args->trans, args->dp, 0, &bp);
if (error)
return error;
forkoff = xfs_attr_shortform_allfit(bp, dp);
if (forkoff) {
error = xfs_attr3_leaf_to_shortform(bp, args, forkoff);
/* bp is gone due to xfs_da_shrink_inode */
} else
xfs_trans_brelse(args->trans, bp);
return error;
}
/*
* Mark an attribute entry INCOMPLETE and save pointers to the relevant buffers
* for later deletion of the entry.
*/
STATIC int
xfs_attr_leaf_mark_incomplete(
struct xfs_da_args *args,
struct xfs_da_state *state)
{
int error;
/*
* Fill in disk block numbers in the state structure
* so that we can get the buffers back after we commit
* several transactions in the following calls.
*/
error = xfs_attr_fillstate(state);
if (error)
return error;
/*
* Mark the attribute as INCOMPLETE
*/
return xfs_attr3_leaf_setflag(args);
}
/*
* Initial setup for xfs_attr_node_removename. Make sure the attr is there and
* the blocks are valid. Attr keys with remote blocks will be marked
* incomplete.
*/
STATIC
int xfs_attr_node_removename_setup(
struct xfs_da_args *args,
struct xfs_da_state **state)
{
int error;
error = xfs_attr_node_hasname(args, state);
if (error != -EEXIST)
return error;
ASSERT((*state)->path.blk[(*state)->path.active - 1].bp != NULL);
ASSERT((*state)->path.blk[(*state)->path.active - 1].magic ==
XFS_ATTR_LEAF_MAGIC);
if (args->rmtblkno > 0) {
error = xfs_attr_leaf_mark_incomplete(args, *state);
if (error)
return error;
return xfs_attr_rmtval_invalidate(args);
}
return 0;
}
STATIC int
xfs_attr_node_remove_rmt(
struct xfs_da_args *args,
struct xfs_da_state *state)
{
int error = 0;
error = xfs_attr_rmtval_remove(args);
if (error)
return error;
/*
* Refill the state structure with buffers, the prior calls released our
* buffers.
*/
return xfs_attr_refillstate(state);
}
/*
* Remove a name from a B-tree attribute list.
*
* This will involve walking down the Btree, and may involve joining
* leaf nodes and even joining intermediate nodes up to and including
* the root node (a special case of an intermediate node).
*/
STATIC int
xfs_attr_node_removename(
struct xfs_da_args *args)
{
struct xfs_da_state *state;
struct xfs_da_state_blk *blk;
int retval, error;
struct xfs_inode *dp = args->dp;
trace_xfs_attr_node_removename(args);
error = xfs_attr_node_removename_setup(args, &state);
if (error)
goto out;
/*
* If there is an out-of-line value, de-allocate the blocks.
* This is done before we remove the attribute so that we don't
* overflow the maximum size of a transaction and/or hit a deadlock.
*/
if (args->rmtblkno > 0) {
error = xfs_attr_node_remove_rmt(args, state);
if (error)
goto out;
}
/*
* Remove the name and update the hashvals in the tree.
*/
blk = &state->path.blk[ state->path.active-1 ];
ASSERT(blk->magic == XFS_ATTR_LEAF_MAGIC);
retval = xfs_attr3_leaf_remove(blk->bp, args);
xfs_da3_fixhashpath(state, &state->path);
/*
* Check to see if the tree needs to be collapsed.
*/
if (retval && (state->path.active > 1)) {
error = xfs_da3_join(state);
if (error)
goto out;
error = xfs_defer_finish(&args->trans);
if (error)
goto out;
/*
* Commit the Btree join operation and start a new trans.
*/
error = xfs_trans_roll_inode(&args->trans, dp);
if (error)
goto out;
}
/*
* If the result is small enough, push it all into the inode.
*/
if (xfs_bmap_one_block(dp, XFS_ATTR_FORK))
error = xfs_attr_node_shrink(args, state);
out:
if (state)
xfs_da_state_free(state);
return error;
}
/*
* Fill in the disk block numbers in the state structure for the buffers
* that are attached to the state structure.
* This is done so that we can quickly reattach ourselves to those buffers
* after some set of transaction commits have released these buffers.
*/
STATIC int
xfs_attr_fillstate(xfs_da_state_t *state)
{
xfs_da_state_path_t *path;
xfs_da_state_blk_t *blk;
int level;
trace_xfs_attr_fillstate(state->args);
/*
* Roll down the "path" in the state structure, storing the on-disk
* block number for those buffers in the "path".
*/
path = &state->path;
ASSERT((path->active >= 0) && (path->active < XFS_DA_NODE_MAXDEPTH));
for (blk = path->blk, level = 0; level < path->active; blk++, level++) {
if (blk->bp) {
blk->disk_blkno = XFS_BUF_ADDR(blk->bp);
blk->bp = NULL;
} else {
blk->disk_blkno = 0;
}
}
/*
* Roll down the "altpath" in the state structure, storing the on-disk
* block number for those buffers in the "altpath".
*/
path = &state->altpath;
ASSERT((path->active >= 0) && (path->active < XFS_DA_NODE_MAXDEPTH));
for (blk = path->blk, level = 0; level < path->active; blk++, level++) {
if (blk->bp) {
blk->disk_blkno = XFS_BUF_ADDR(blk->bp);
blk->bp = NULL;
} else {
blk->disk_blkno = 0;
}
}
return 0;
}
/*
* Reattach the buffers to the state structure based on the disk block
* numbers stored in the state structure.
* This is done after some set of transaction commits have released those
* buffers from our grip.
*/
STATIC int
xfs_attr_refillstate(xfs_da_state_t *state)
{
xfs_da_state_path_t *path;
xfs_da_state_blk_t *blk;
int level, error;
trace_xfs_attr_refillstate(state->args);
/*
* Roll down the "path" in the state structure, storing the on-disk
* block number for those buffers in the "path".
*/
path = &state->path;
ASSERT((path->active >= 0) && (path->active < XFS_DA_NODE_MAXDEPTH));
for (blk = path->blk, level = 0; level < path->active; blk++, level++) {
if (blk->disk_blkno) {
error = xfs_da3_node_read_mapped(state->args->trans,
state->args->dp, blk->disk_blkno,
&blk->bp, XFS_ATTR_FORK);
if (error)
return error;
} else {
blk->bp = NULL;
}
}
/*
* Roll down the "altpath" in the state structure, storing the on-disk
* block number for those buffers in the "altpath".
*/
path = &state->altpath;
ASSERT((path->active >= 0) && (path->active < XFS_DA_NODE_MAXDEPTH));
for (blk = path->blk, level = 0; level < path->active; blk++, level++) {
if (blk->disk_blkno) {
error = xfs_da3_node_read_mapped(state->args->trans,
state->args->dp, blk->disk_blkno,
&blk->bp, XFS_ATTR_FORK);
if (error)
return error;
} else {
blk->bp = NULL;
}
}
return 0;
}
/*
* Retrieve the attribute data from a node attribute list.
*
* This routine gets called for any attribute fork that has more than one
* block, ie: both true Btree attr lists and for single-leaf-blocks with
* "remote" values taking up more blocks.
*
* Returns 0 on successful retrieval, otherwise an error.
*/
STATIC int
xfs_attr_node_get(
struct xfs_da_args *args)
{
struct xfs_da_state *state;
struct xfs_da_state_blk *blk;
int i;
int error;
trace_xfs_attr_node_get(args);
/*
* Search to see if name exists, and get back a pointer to it.
*/
error = xfs_attr_node_hasname(args, &state);
if (error != -EEXIST)
goto out_release;
/*
* Get the value, local or "remote"
*/
blk = &state->path.blk[state->path.active - 1];
error = xfs_attr3_leaf_getvalue(blk->bp, args);
/*
* If not in a transaction, we have to release all the buffers.
*/
out_release:
for (i = 0; state != NULL && i < state->path.active; i++) {
xfs_trans_brelse(args->trans, state->path.blk[i].bp);
state->path.blk[i].bp = NULL;
}
if (state)
xfs_da_state_free(state);
return error;
}
/* Returns true if the attribute entry name is valid. */
bool
xfs_attr_namecheck(
const void *name,
size_t length)
{
/*
* MAXNAMELEN includes the trailing null, but (name/length) leave it
* out, so use >= for the length check.
*/
if (length >= MAXNAMELEN)
return false;
/* There shouldn't be any nulls here */
return !memchr(name, 0, length);
}