Files
u-boot/include
Martyn Welch 6d6564957c board: ge: bx50v3: Enable hardware watchdog
Enable the hardware watchdog on bx50v3 to cause it to reset in the event
the board hangs.

Configure GPIO_9 pin as WDOG1_B so that a watchdog timeout results in a
full system reset.

The watchdog is used and reconfigured by systemd approximately 1.7 seconds
into boot. Adding a few seconds for U-Boot and a few more seconds as a
safety margin.

Note that the PCIe controller is _not_ put back into a safe state prior
to board reset.  This is a problem if board reset is implemented as CPU
reset.

Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-02-04 12:00:58 +01:00
..
2018-02-04 12:00:58 +01:00
2018-01-28 12:27:30 -05:00
2017-11-28 16:08:52 +01:00
2018-01-22 23:09:14 +01:00
2017-09-16 14:57:44 +08:00
2017-10-02 21:52:18 -04:00
2018-01-28 17:12:35 +01:00
2018-01-28 17:12:36 +01:00
2018-01-22 23:09:14 +01:00
2018-01-22 23:09:14 +01:00
2018-01-22 23:09:14 +01:00
2018-01-22 16:43:31 -05:00
2018-01-29 07:48:59 +01:00
2017-10-02 21:52:18 -04:00
2017-11-07 10:26:27 +01:00
2018-02-04 12:00:58 +01:00
2017-12-07 15:17:00 -05:00
2017-11-28 21:59:30 +01:00
2017-12-04 22:00:00 +09:00
2017-11-28 21:59:30 +01:00
2017-12-07 15:17:00 -05:00
2018-01-24 12:04:07 +05:30
2018-01-24 12:04:07 +05:30
2017-12-12 19:53:45 -07:00
2017-10-01 16:32:51 +02:00
2017-10-04 12:00:19 -04:00