Fix for pcode timeouts on BXT and GLK, cmdparser fixes and fixes
for new vbt version on CFL and CNL.
GVT contains vGPU reset enhancement, which refines vGPU reset flow
and the support of virtual aperture read/write when x-no-mmap=on
is set in KVM, which is required by a test case from Redhat and
also another fix for virtual OpRegion.
* tag 'drm-intel-next-fixes-2018-02-07' of git://anongit.freedesktop.org/drm/drm-intel:
drm/i915/bios: add DP max link rate to VBT child device struct
drm/i915/cnp: Properly handle VBT ddc pin out of bounds.
drm/i915/cnp: Ignore VBT request for know invalid DDC pin.
drm/i915/cmdparser: Do not check past the cmd length.
drm/i915/cmdparser: Check reg_table_count before derefencing.
drm/i915/bxt, glk: Increase PCODE timeouts during CDCLK freq changing
drm/i915/gvt: Use KVM r/w to access guest opregion
drm/i915/gvt: Fix aperture read/write emulation when enable x-no-mmap=on
drm/i915/gvt: only reset execlist state of one engine during VM engine reset
drm/i915/gvt: refine intel_vgpu_submission_ops as per engine ops
A few more misc fixes for 4.16.
* 'drm-next-4.16' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu: re-enable CGCG on CZ and disable on ST
drm/amdgpu: disable coarse grain clockgating for ST
drm/radeon: adjust tested variable
drm/amdgpu: remove WARN_ON when VM isn't found v2
drm/amdgpu: fix locking in vega10_ih_prescreen_iv
drm/amdgpu: fix another potential cause of VM faults
drm/amdgpu: use queue 0 for kiq ring
drm/ttm: Fix 'buf' pointer update in ttm_bo_vm_access_kmap() (v2)
drm/ttm: fix missing parameter change for ttm_bo_cleanup_refs
On blb and pnv, we are seeing sporadic
i915 0000:00:02.0: Resetting chip after gpu hang
[drm:intel_gpu_reset [i915]] rcs0: timed out on STOP_RING
[drm:i915_reset [i915]] *ERROR* Failed hw init on reset -5
which notably lack the actual root cause of the error. Ostensibly it
should be the init_ring_common() that failed, but it's error paths are
covered by DRM_ERROR.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180207111545.17078-1-chris@chris-wilson.co.uk
If we submit a request and see that the previous request on this
timeline was already signaled, we first do not need to add the
dependency tracker for that completed request and secondly we know that
we there is then a large backlog in retiring requests affecting this
timeline. Given that we just submitted more work to the HW, now would be
a good time to catch up on those retirements.
v2: Try to sum up the compromises involved in flushing the retirement
queue after submission.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180207084350.3929-1-chris@chris-wilson.co.uk
The Versatile PL110 implementations use multiple endpoints:
from the PL111 port, the lines are routed through a PLD,
and from there forked so the same lines go to a VGA DAC and
an external TFT panel connector. This is discrete wireing
so there is no way to turn of one output, i.e. this is
really two endpoints, not two ports.
We model this with multiple endpoints, so we need to loop
over the available endpoints, check for panel or bridge on
each and accumulate the result before continuing.
The code already will give the panel preference over the
bridge, if present, so the output will be sent to the panel
if both a panel and a bridge is present on two endpoints
of the same port.
If they all return -EPROBE_DEFER we return -EPROBE_DEFER
as well.
If just one endpoint is present on the port, the behaviour
is the same as before.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180206093540.8147-5-linus.walleij@linaro.org
The ARM reference designs "Versatile AB" and "Versatile PB"
contain panel connectors with autodetection of the connected
panel type. This adds a small driver utilizing the MFD syscon
look-up to read the autodetection register and set up the
corresponding panel appropriately.
In the source file there is a bit of elaboration of the
panel types and interfaces on these boards.
This was tested with the PL111 DRM driver on the ARM Versatile
AB with the IB2 daughterboard.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205192013.5349-2-linus.walleij@linaro.org
When the TTM memory manager in KGD evicts BOs, all user mode queues
potentially accessing these BOs must be evicted temporarily. Once
user mode queues are evicted, the eviction fence is signaled,
allowing the migration of the BO to proceed.
A delayed worker is scheduled to restore all the BOs belonging to
the evicted process and restart its queues.
During suspend/resume of the GPU we also evict all processes to allow
KGD to save BOs in system memory, since VRAM will be lost.
v2:
* Account for eviction when updating of q->is_active in MQD manager
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Create/destroy the GPUVM context during PDD creation/destruction.
Get VM page table base and program it during process registration
(HWS) or VMID allocation (non-HWS).
v2:
* Used dev instead of pdd->dev in kfd_flush_tlb
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Unaligned atomic operations can cause problems on some CPU
architectures. Use simpler bitmask operations instead. Atomic bit
manipulations are not necessary since dqm->lock is held during these
operations.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Currently we see sporadic timeouts during CDCLK changing both on BXT and
GLK as reported by the Bugzilla: ticket. It's easy to reproduce this by
changing the frequency in a tight loop after blanking the display. The
upper bound for the completion time is 800us based on my tests, so
increase it from the current 500us to 2ms; with that I couldn't trigger
the problem either on BXT or GLK.
Note that timeouts happened during both the change notification and the
voltage level setting PCODE request. (For the latter one BSpec doesn't
require us to wait for completion before further HW programming.)
This issue is similar to
commit 2c7d0602c8 ("drm/i915/gen9: Fix PCODE polling during CDCLK
change notification")
but there the PCODE request does complete (as shown by the mbox
busy flag), only the reply we get from PCODE indicates a failure.
So there we keep resending the request until a success reply, here we
just have to increase the timeout for the one PCODE request we send.
v2:
- s/snb_pcode_request/sandybridge_pcode_write_timeout/ (Ville)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.4+
Acked-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103326
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130142939.17983-1-imre.deak@intel.com
(cherry picked from commit e76019a819)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
For KVMGT, the guest opregion, which is handled by VFIO, is actually a
piece of guest memory which won't be accessed by devices. So, its mfn
shouldn't be obtained through VFIO interface. This patch uses KVM r/w
interface to access the data in guest opregion.
Fix the guest opregion accessing issue when host "intel_iommu=on".
v3:
- Remove mapped flag for KVM/VFIO usage, as it's useless for KVM.
v2:
- Set the gpa correctly when invoking KVM r/w operations. (Zhenyu)
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Cc: Yan Zhao <yan.y.zhao@intel.com>
Cc: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When add 'x-no-mmap=on' for vfio-pci option, aperture access in guest
is emulated. But the vgpu_aperture_rw() function take wrong offset when
do memcpy, since vgpu->gm.aperture_va is not the base of entire aperture.
This mistake cause GPU command in guest get lost and so the seqno is not
updated in engine HWSP.
This patch fix this, and it also move the emulation code to kvmgt.
Because only vfio need to emulate it. Put aperture rw to MMIO emulation
path breaks assumptions in xengt.
v2: Remove PAGE_ALIGN for size (zhenyu)
Fixes: f090a00df9 ("drm/i915/gvt: Add emulation for BAR2 (aperture) with normal file RW approach")
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Only reset vgpu execlist state of the exact engine which gets reset
request from VM. After read context status from HWSP enabled, KMD will use
the saved CSB read pointer but not always read from MMIO. When one engine
reset happen, only the read pointer of this engine will be reset, in GVT-g
host side also need to align with this policy, otherwise VM may get wrong
CSB status after one engine reset compeleted.
v2: Split refine and fix patch, code refine(Zhenyu)
v3: Move active flag of vgpu scheduler into sched_data(Zhenyu)
Cc: Fred Gao <fred.gao@intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Pull PCI updates from Bjorn Helgaas:
- skip AER driver error recovery callbacks for correctable errors
reported via ACPI APEI, as we already do for errors reported via the
native path (Tyler Baicar)
- fix DPC shared interrupt handling (Alex Williamson)
- print full DPC interrupt number (Keith Busch)
- enable DPC only if AER is available (Keith Busch)
- simplify DPC code (Bjorn Helgaas)
- calculate ASPM L1 substate parameter instead of hardcoding it (Bjorn
Helgaas)
- enable Latency Tolerance Reporting for ASPM L1 substates (Bjorn
Helgaas)
- move ASPM internal interfaces out of public header (Bjorn Helgaas)
- allow hot-removal of VGA devices (Mika Westerberg)
- speed up unplug and shutdown by assuming Thunderbolt controllers
don't support Command Completed events (Lukas Wunner)
- add AtomicOps support for GPU and Infiniband drivers (Felix Kuehling,
Jay Cornwall)
- expose "ari_enabled" in sysfs to help NIC naming (Stuart Hayes)
- clean up PCI DMA interface usage (Christoph Hellwig)
- remove PCI pool API (replaced with DMA pool) (Romain Perier)
- deprecate pci_get_bus_and_slot(), which assumed PCI domain 0 (Sinan
Kaya)
- move DT PCI code from drivers/of/ to drivers/pci/ (Rob Herring)
- add PCI-specific wrappers for dev_info(), etc (Frederick Lawler)
- remove warnings on sysfs mmap failure (Bjorn Helgaas)
- quiet ROM validation messages (Alex Deucher)
- remove redundant memory alloc failure messages (Markus Elfring)
- fill in types for compile-time VGA and other I/O port resources
(Bjorn Helgaas)
- make "pci=pcie_scan_all" work for Root Ports as well as Downstream
Ports to help AmigaOne X1000 (Bjorn Helgaas)
- add SPDX tags to all PCI files (Bjorn Helgaas)
- quirk Marvell 9128 DMA aliases (Alex Williamson)
- quirk broken INTx disable on Ceton InfiniTV4 (Bjorn Helgaas)
- fix CONFIG_PCI=n build by adding dummy pci_irqd_intx_xlate() (Niklas
Cassel)
- use DMA API to get MSI address for DesignWare IP (Niklas Cassel)
- fix endpoint-mode DMA mask configuration (Kishon Vijay Abraham I)
- fix ARTPEC-6 incorrect IS_ERR() usage (Wei Yongjun)
- add support for ARTPEC-7 SoC (Niklas Cassel)
- add endpoint-mode support for ARTPEC (Niklas Cassel)
- add Cadence PCIe host and endpoint controller driver (Cyrille
Pitchen)
- handle multiple INTx status bits being set in dra7xx (Vignesh R)
- translate dra7xx hwirq range to fix INTD handling (Vignesh R)
- remove deprecated Exynos PHY initialization code (Jaehoon Chung)
- fix MSI erratum workaround for HiSilicon Hip06/Hip07 (Dongdong Liu)
- fix NULL pointer dereference in iProc BCMA driver (Ray Jui)
- fix Keystone interrupt-controller-node lookup (Johan Hovold)
- constify qcom driver structures (Julia Lawall)
- rework Tegra config space mapping to increase space available for
endpoints (Vidya Sagar)
- simplify Tegra driver by using bus->sysdata (Manikanta Maddireddy)
- remove PCI_REASSIGN_ALL_BUS usage on Tegra (Manikanta Maddireddy)
- add support for Global Fabric Manager Server (GFMS) event to
Microsemi Switchtec switch driver (Logan Gunthorpe)
- add IDs for Switchtec PSX 24xG3 and PSX 48xG3 (Kelvin Cao)
* tag 'pci-v4.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits)
PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller
dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe endpoint controller
PCI: endpoint: Fix EPF device name to support multi-function devices
PCI: endpoint: Add the function number as argument to EPC ops
PCI: cadence: Add host driver for Cadence PCIe controller
dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe host controller
PCI: Add vendor ID for Cadence
PCI: Add generic function to probe PCI host controllers
PCI: generic: fix missing call of pci_free_resource_list()
PCI: OF: Add generic function to parse and allocate PCI resources
PCI: Regroup all PCI related entries into drivers/pci/Makefile
PCI/DPC: Reformat DPC register definitions
PCI/DPC: Add and use DPC Status register field definitions
PCI/DPC: Squash dpc_rp_pio_get_info() into dpc_process_rp_pio_error()
PCI/DPC: Remove unnecessary RP PIO register structs
PCI/DPC: Push dpc->rp_pio_status assignment into dpc_rp_pio_get_info()
PCI/DPC: Squash dpc_rp_pio_print_error() into dpc_rp_pio_get_info()
PCI/DPC: Make RP PIO log size check more generic
PCI/DPC: Rename local "status" to "dpc_status"
PCI/DPC: Squash dpc_rp_pio_print_tlp_header() into dpc_rp_pio_print_error()
...
This workaround should prevent a bug that can be hit on a context
restore. To avoid the issue, we must emit a PIPE_CONTROL with CS stall
(0x7a000004 0x00100000 0x00000000 0x00000000) followed by 12DW's of
NOOP(0x0) in the indirect context batch buffer, to ensure the engine is
idle prior to programming 3DSTATE_SAMPLE_PATTERN.
It's also not clear whether we should add those extra dwords because of
the workaround itself, or if that's just padding for the WA BB (and next
commands could come right after the PIPE_CONTROL). We keep them for now.
References: HSD#1939868
v2: More descriptive changelog and comments.
v3: Explain that PIPE_CONTROL is actually 6 dwords, and that we advance
10 more dwords because of that.
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205233330.14973-1-rafael.antognolli@intel.com
- initial kepler clock gating support
- atomic gamma handling fixes
- support for gp108 "secure boot" (enables acceleration, finally)
* 'linux-4.16' of git://github.com/skeggsb/linux:
drm/nouveau/clk: fix gcc-7 -Wint-in-bool-context warning
drm/nouveau/mmu: Fix trailing semicolon
drm/nouveau: Introduce NvPmEnableGating option
drm/nouveau: Add support for SLCG for Kepler2
drm/nouveau: Add support for BLCG on Kepler2
drm/nouveau: Add support for BLCG on Kepler1
drm/nouveau: Add support for basic clockgating on Kepler1
drm/nouveau/kms/nv50: fix handling of gamma since atomic conversion
drm/nouveau/kms/nv50: use INTERPOLATE_257_UNITY_RANGE LUT on newer chipsets
drm/nouveau/kms/nv50: use "low res" lut for indexed mode
drm/nouveau/kms/nv50: prepare for double-buffered LUTs
drm/nouveau/bo: add helper functions for handling pinned+mapped buffers
drm/nouveau/fbcon: add module parameter to select bits-per-pixel
drm/nouveau/secboot/gp108: implement on top of acr_r370
drm/nouveau/secboot/r370: implement support for booting LS SEC2 ucode
drm/nouveau/secboot/r370: move a bunch of r375 stuff to a new implementation
drm/nouveau: nouveau: use correct string length
drm/nouveau/drm/nouveau/mmu: fix odd_ptr_err.cocci warnings
drm/nouveau/pmu/fuc: don't use movw directly anymore
Deprecate the silly I915_SET_COLORKEY_NONE flag. The obvious
way to disable colorkey is to just set flags to 0, which is
exactly what the intel ddx has been doing all along.
Currently when userspace sets the flags to 0, we end up in a
funny state where colorkey is disabled, but various colorkey
vs. scaling checks still consider colorkey to be enabled, and
thus we don't allow plane scaling to kick in.
In case there is some other userspace out there that actually
uses this flag (unlikely as this is an i915 specific uapi)
we'll keep on accepting it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180202204231.27905-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
DP HDCP1.4 spec mandates that An can be written to panel only after
detecting the panel's hdcp capability.
For DP 0th Bit of Bcaps register indicates the panel's hdcp capability
For HDMI valid BKSV indicates the panel's hdcp capability.
For HDMI it is optional to detect the panel's hdcp capability before
An Write.
v2:
Added comments explaining the need for action [Seanpaul].
Made panel's hdcp capability detection optional for hdmi [Seanpaul].
Defined a func for reading bcaps for DP [Seanpaul].
v3:
Removed the NULL initialization [Seanpaul].
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1517609350-10698-7-git-send-email-ramalingam.c@intel.com
HDCP specification says that when bksv is identified as invalid
(not with 20 1s), bksv should be re-read and verified.
This patch adds the above mentioned re-read for bksv.
v2:
Rephrased the commit msg [Seanpaul]
v3:
do-while to for-loop [Seanpaul]
v4:
retry only if bksv is invalid and no error msg on each attempt
[Seanpaul]
v5:
Correcting the return value [Seanpaul].
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1517851922-30547-1-git-send-email-ramalingam.c@intel.com
If a HDCP repeater is detected with zero downstream devices,
HDCP spec approves either of below actions:
1. Dont continue on second stage authentication. Disable encryption.
2. Continue with second stage authentication excluding the KSV list and
on success, continue encryption.
Since disable encryption is agreed, repeater is not expected to have its
own display. So there is no consumption of the display content in such
setup.
Hence, incase of repeater with zero device count, this patch fails the
HDCP authentication and stops the HDCP encryption.
v2:
Rephrased commit msg and added comments in code [Seanpaul]
v3:
No changes. Added Reviewed-by tag.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1517609350-10698-3-git-send-email-ramalingam.c@intel.com
We enable the HDCP encryption as a part of first stage authentication.
So when second stage authentication fails, we need to disable the HDCP
encryption and signalling.
This patch ensures that, when hdcp authentication fails, HDCP encryption
and signalling is turned off.
v2:
Dropped connector ref passing to auth [Seanpaul]
Moved the call to disable_hdcp() to enable_hdcp() [Seanpaul]
v3:
No Changes. Added the Reveiwed-by tag.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1517609350-10698-2-git-send-email-ramalingam.c@intel.com
