The following happened when migrating an old fbdev driver to DRM:
The Integrator/CP PL111 supports 16BPP but only ARGB1555/ABGR1555
or XRGB1555/XBGR1555 i.e. the maximum depth is 15.
This makes the initialization of the framebuffer fail since
the code in drm_fb_helper_single_fb_probe() assigns the same value
to sizes.surface_bpp and sizes.surface_depth. I.e. it simply assumes
a 1-to-1 mapping between BPP and depth, which is true in most cases
but not for this hardware that only support odd formats.
To support the odd case of a driver supporting 16BPP with only 15
bits of depth, this patch will make the code loop over the formats
supported on the primary plane on each CRTC managed by the FB
helper and cap the depth to the maximum supported on any primary
plane.
On the PL110 Integrator, this makes drm_mode_legacy_fb_format()
select DRM_FORMAT_XRGB1555 which is acceptable for this driver, and
thus we get framebuffer, penguin and console on the Integrator/CP.
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190110114049.10618-1-linus.walleij@linaro.org
Fill out the AVI infoframe quantization range bits using
drm_hdmi_avi_infoframe_quant_range() for SDVO HDMI encoder as well.
This changes the behaviour slightly as
drm_hdmi_avi_infoframe_quant_range() will set a non-zero Q bit
even when QS==0 iff the Q bit matched the default quantization
range for the given mode. This matches the recommendation in
HDMI 2.0 and is allowed even before that.
v2: Pimp commit msg (DK)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108172828.15184-2-ville.syrjala@linux.intel.com
The wait-for-idle used from within the shrinker_lock_uninterruptible
depends on the struct_mutex locking state being known and declared to
i915_request_wait(). As it is conceivable that we reach the vmap
notifier from underneath struct_mutex (and so keep on relying on the
mutex_trylock_recursive), we should not blindly call i915_request_wait.
In the process we can remove the dubious polling to acquire
struct_mutex, and simply act, or not, on a successful trylock.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190109164204.23935-2-chris@chris-wilson.co.uk
If the current process is being killed (it was interrupted with SIGKILL
or equivalent), it will not make any progress in page allocation and we
can abort performing the shrinking on its behalf. So we can use
mutex_lock_killable() instead (although this path should only be
reachable from kswapd currently).
Tvrtko pointed out that it should also be reachable from debugfs, which
he would prefer retain its interruptiblity. As a compromise, killable is a
step in the right direction!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190109164204.23935-1-chris@chris-wilson.co.uk
The only gen8+ platform that has the feature is BDW, but we don't define
the feature flag on any BDW platform and we only have partial support in
the gen8 path (irq enabling code, but no handler).
The only thing we could do in the irq handler is report the error
to userspace, but no one asked/cared about that since BDW was
released so it is relatively safe to assume that even if we added the
message no one would look at it. Just drop the dead code from the
driver instead.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190109213147.16851-1-daniele.ceraolospurio@intel.com
Strict requirement of pixclock to be zero breaks support of SDL 1.2
which contains hardcoded table of supported video modes with non-zero
pixclock values[1].
To better understand which pixclock values are considered valid and how
driver should handle these values, I briefly examined few existing fbdev
drivers and documentation in Documentation/fb/. And it looks like there
are no strict rules on that and actual behaviour varies:
* some drivers treat (pixclock == 0) as "use defaults" (uvesafb.c);
* some treat (pixclock == 0) as invalid value which leads to
-EINVAL (clps711x-fb.c);
* some pass converted pixclock value to hardware (uvesafb.c);
* some are trying to find nearest value from predefined table
(vga16fb.c, video_gx.c).
Given this, I believe that it should be safe to just ignore this value if
changing is not supported. It seems that any portable fbdev application
which was not written only for one specific device working under one
specific kernel version should not rely on any particular behaviour of
pixclock anyway.
However, while enabling SDL1 applications to work out of the box when
there is no /etc/fb.modes with valid settings, this change affects the
video mode choosing logic in SDL. Depending on current screen
resolution, contents of /etc/fb.modes and resolution requested by
application, this may lead to user-visible difference (not always):
image will be displayed in a right way, but it will be aligned to the
left instead of center. There is no "right behaviour" here as well, as
emulated fbdev, opposing to old fbdev drivers, simply ignores any
requsts of video mode changes with resolutions smaller than current.
The easiest way to reproduce this problem is to install sdl-sopwith[2],
remove /etc/fb.modes file if it exists, and then try to run sopwith
from console without X. At least in Fedora 29, sopwith may be simply
installed from standard repositories.
[1] SDL 1.2.15 source code, src/video/fbcon/SDL_fbvideo.c, vesa_timings
[2] http://sdl-sopwith.sourceforge.net/
Signed-off-by: Ivan Mironov <mironov.ivan@gmail.com>
Cc: stable@vger.kernel.org
Fixes: 79e539453b ("DRM: i915: add mode setting support")
Fixes: 771fe6b912 ("drm/radeon: introduce kernel modesetting for radeon hardware")
Fixes: 785b93ef8c ("drm/kms: move driver specific fb common code to helper functions (v2)")
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108072353.28078-3-mironov.ivan@gmail.com
SDL 1.2 sets all fields related to the pixel format to zero in some
cases[1]. Prior to commit db05c48197 ("drm: fb-helper: Reject all
pixel format changing requests"), there was an unintentional workaround
for this that existed for more than a decade. First in device-specific DRM
drivers, then here in drm_fb_helper.c.
Previous code containing this workaround just ignores pixel format fields
from userspace code. Not a good thing either, as this way, driver may
silently use pixel format different from what client actually requested,
and this in turn will lead to displaying garbage on the screen. I think
that returning EINVAL to userspace in this particular case is the right
option, so I decided to left code from problematic commit untouched
instead of just reverting it entirely.
Here is the steps required to reproduce this problem exactly:
1) Compile fceux[2] with SDL 1.2.15 and without GTK or OpenGL
support. SDL should be compiled with fbdev support (which is
on by default).
2) Create /etc/fb.modes with following contents (values seems
not used, and just required to trigger problematic code in
SDL):
mode "test"
geometry 1 1 1 1 1
timings 1 1 1 1 1 1 1
endmode
3) Create ~/.fceux/fceux.cfg with following contents:
SDL.Hotkeys.Quit = 27
SDL.DoubleBuffering = 1
4) Ensure that screen resolution is at least 1280x960 (e.g.
append "video=Virtual-1:1280x960-32" to the kernel cmdline
for qemu/QXL).
5) Try to run fceux on VT with some ROM file[3]:
# ./fceux color_test.nes
[1] SDL 1.2.15 source code, src/video/fbcon/SDL_fbvideo.c,
FB_SetVideoMode()
[2] http://www.fceux.com
[3] Example ROM: https://github.com/bokuweb/rustynes/blob/master/roms/color_test.nes
Reported-by: saahriktu <mail@saahriktu.org>
Suggested-by: saahriktu <mail@saahriktu.org>
Cc: stable@vger.kernel.org
Fixes: db05c48197 ("drm: fb-helper: Reject all pixel format changing requests")
Signed-off-by: Ivan Mironov <mironov.ivan@gmail.com>
[danvet: Delete misleading comment.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108072353.28078-2-mironov.ivan@gmail.com
Link: https://patchwork.freedesktop.org/patch/msgid/20190108072353.28078-2-mironov.ivan@gmail.com
It doesn't need to be changed, make it const. The string literals should
anyway be referred to as const data.
The following gets moved to rodata section:
0000000000000080 l O .rodata 0000000000001c00 cmd_info
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
It doesn't need to be changed, make it const. The string literals should
anyway be referred to as const data.
The following gets moved to rodata section:
0000000000000410 l O .rodata 0000000000000018 decode_info_mi
0000000000000390 l O .rodata 0000000000000018 decode_info_3d_media
00000000000003e0 l O .rodata 0000000000000018 decode_info_2d
0000000000000330 l O .rodata 0000000000000018 decode_info_mfx_vc
00000000000002e0 l O .rodata 0000000000000018 decode_info_vebox
0000000000000300 l O .rodata 0000000000000028 sub_op_vebox
0000000000000360 l O .rodata 0000000000000028 sub_op_mfx_vc
00000000000003c0 l O .rodata 0000000000000020 sub_op_3d_media
0000000000000400 l O .rodata 0000000000000010 sub_op_2d
0000000000000430 l O .rodata 0000000000000010 sub_op_mi
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
The gem drivers use shmemfs to allocate backing storage for gem objects.
On Samsung Chromebook Plus, the drm/rockchip driver may call
rockchip_gem_get_pages -> drm_gem_get_pages -> shmem_read_mapping_page
to pin a lot of pages, breaking the page reclaim mechanism and causing
oom-killer invocation.
E.g. when the size of a zone is 3.9 GiB, the inactive_ratio is 5. If
active_anon / inactive_anon < 5 and all pages in the inactive_anon lru
are pinned, page reclaim would keep scanning inactive_anon lru without
reclaiming memory. It breaks page reclaim when the rockchip driver only
pins about 1/6 of the anon lru pages.
Mark these pinned pages as unevictable to avoid the premature oom-killer
invocation. See also similar patch on i915 driver [1].
[1]: https://patchwork.freedesktop.org/patch/msgid/20181106132324.17390-1-chris@chris-wilson.co.uk
Signed-off-by: Kuo-Hsin Yang <vovoy@chromium.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108074517.209860-1-vovoy@chromium.org
drm-misc-next for 5.1:
UAPI Changes:
Cross-subsystem Changes:
- Turn dma-buf fence sequence numbers into 64 bit numbers
Core Changes:
- Move to a common helper for the DP MST hotplug for radeon, i915 and
amdgpu
- i2c improvements for drm_dp_mst
- Removal of drm_syncobj_cb
- Introduction of an helper to create and attach the TV margin properties
Driver Changes:
- Improve cache flushes for v3d
- Reflection support for vc4
- HDMI overscan support for vc4
- Add implicit fencing support for rockchip and sun4i
- Switch to generic fbdev emulation for virtio
Signed-off-by: Dave Airlie <airlied@redhat.com>
[airlied: applied amdgpu merge fixup]
From: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190107180333.amklwycudbsub3s5@flea
Initially DP0_SRCCTRL is set to a static value which includes
DP0_SRCCTRL_LANES_2 and DP0_SRCCTRL_BW27, even when only 1 lane of
1.62Gbps speed is used. DP1_SRCCTRL is configured to a magic number.
This patch changes the configuration as follows:
Configure DP0_SRCCTRL by using tc_srcctrl() which provides the correct
value.
DP1_SRCCTRL needs two bits to be set to the same value as DP0_SRCCTRL:
SSCG and BW27. All other bits can be zero.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-5-tomi.valkeinen@ti.com
