In some cases, psp response status is not 0 even there is no
problem while the command is submitted. Some version of PSP FW
doesn't write 0 to that field.
So here we would like to only print a warning instead of an error
during psp initialization to avoid breaking hw_init and it doesn't
return -EINVAL.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Xiangliang Yu<Xiangliang.Yu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Paul Menzel <pmenzel+amd-gfx@molgen.mpg.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
HW doorbell writing routing policy: writing to doorbell
not in SDMA/IH/MM/ACV doorbell range will be routed to CP.
So CP doorbell routing depends on doorbell range setting
of above blocks. Setting doorbell range of above blocks
earlier (soc15_common_hw_init) to make sure CP doorbell
writing be routed to CP block.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Different ASIC has different SDMA queue number so
different SDMA doorbell range. Introduce an extra
parameter to sdma_doorbell_range function and set
sdma doorbell range correctly.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Different ASIC has different sdma doorbell range. Add
a per device sdma_doorbell_range field and initialize
it.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This fixes printing clock names in cases like:
[ 5.352311] [drm] DM_PPLIB: values for Invalid clock
[ 5.352313] [drm] DM_PPLIB: 400000 in kHz
[ 5.352313] [drm] DM_PPLIB: 933000 in kHz
[ 5.352314] [drm] DM_PPLIB: 1067000 in kHz
[ 5.352315] [drm] DM_PPLIB: 1200000 in kHz
[ 5.352317] [drm] DM_PPLIB: values for Invalid clock
[ 5.352318] [drm] DM_PPLIB: 300000 in kHz
[ 5.352318] [drm] DM_PPLIB: 600000 in kHz
[ 5.352319] [drm] DM_PPLIB: 626000 in kHz
[ 5.352320] [drm] DM_PPLIB: 654000 in kHz
(source: HP EliteBook 745 G5 w. RAVEN 0x1002:0x15DD 0x103C:0x83D5 0xD1)
On my system above "Invalid" names got replaced by "F" and "DCF".
The same problem was occurring on Huawei Matebook D with just 667000 kHz
instead of 400000 kHz.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Need to check if crtc state is changed so that mode set is
required before trying to create new stream.
It deals with the MST hotplug use case when plug back to the
same connector where the failure to create new stream for the
inactive crtc on the old connector.
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On gen3 we must disable the TV encoder vertical filter for >1024
pixel wide sources. Once that's done all we can is try to center
the image on the screen. Naturally the TV mode vertical resolution
must be equal or larger than the user mode vertical resolution
or else we'd have to cut off part of the user mode.
And while we may not be able to respect the user's choice of
top and bottom borders exactly (or we'd have to reject he mode
most likely), we can try to maintain the relative sizes of the
top and bottom border with respect to each orher.
Additionally we must configure the pipe as interlaced if the
TV mode is interlaced.
v2: Make +intel_tv_connector_duplicate_state() static and drop
the badly copy pasted kerneldoc
s/IS_GEN3(dev_priv/IS_GEN(dev_priv, 3)/
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181112170000.27531-16-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
To make vblank timestamps work better with the TV encoder let's
scale the pipe timings such that the relationship between the
TV active and TV blanking periods is mirrored in the
corresponding pipe timings.
Note that in reality the pipe runs at a faster speed during the
TV vblank, and correspondigly there are periods when the pipe
is enitrely stopped. We pretend that this isn't the case and
as such we incur some error in the vblank timestamps during
the TV vblank. Further explanation of the issues in a big
comment in the code.
This makes the vblank timestamps good enough to make
i965gm (which doesn't have a working frame counter with
the TV encoder) report correct frame numbers. Previously
you could get all kinds of nonsense which resulted in
eg. glxgears reporting that it's running at twice the
actual framerate in most cases.
v2: s/IS_GEN4(dev_priv)/IS_GEN(dev_priv, 4)/ in the comment
for consistency
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181112170000.27531-15-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
On i965gm the hardware frame counter does not work when
the TV encoder is active. So let's not try to consult
the hardware frame counter in that case. Instead we'll
fall back to the timestamp based guesstimation method
used on gen2.
Note that the pipe timings generated by the TV encoder
are also rather peculiar. Apparently the pipe wants to
run at a much higher speed (related to the oversample
clock somehow it seems) but during the vertical active
period the TV encoder stalls the pipe every few lines
to keep its speed in check. But once the vertical
blanking period is reached the pipe gets to run at full
speed. This means our vblank timestamp estimates are
suspect. Fixing all that would require quite a bit
more work. This simple fix at least avoids the nasty
vblank timeouts that are happening currently.
Curiously the frame counter works just fine on i945gm
and gm45. I don't really understand what kind of mishap
occurred with the hardware design on i965gm. Sadly
I wasn't able to find any chicken bits etc. that would
fix the frame counter :(
v2: Move the zero vs. non-zero hw counter value handling
into i915_get_vblank_counter() (Daniel)
Use the per-crtc maximum exclusively, leaving the
per-device maximum at zero
v3: max_vblank_count not populated yet in intel_enable_pipe()
use intel_crtc_max_vblank_count() instead
Cc: stable@vger.kernel.org
Cc: Daniel Vetter <daniel@ffwll.ch>
Fixes: 51e31d49c8 ("drm/i915: Use generic vblank wait")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93782
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190122125149.GE5527@ideak-desk.fi.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Now that the submission backends are controlled via their own spinlocks,
with a wave of a magic wand we can lift the struct_mutex requirement
around GPU reset. That is we allow the submission frontend (userspace)
to keep on submitting while we process the GPU reset as we can suspend
the backend independently.
The major change is around the backoff/handoff strategy for performing
the reset. With no mutex deadlock, we no longer have to coordinate with
any waiter, and just perform the reset immediately.
Testcase: igt/gem_mmap_gtt/hang # regresses
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190125132230.22221-3-chris@chris-wilson.co.uk
The guc (and huc) currently inexcruitably depend on struct_mutex for
device reinitialisation from inside the reset, and indeed taking any
mutex here is verboten (as we must be able to reset from underneath any
of our mutexes). That makes recovering the guc unviable without, for
example, reserving contiguous vma space and pages for it to use.
The plan to re-enable global reset for the GuC centres around reusing the
WOPM reserved space at the top of the aperture (that we know we can
populate a contiguous range large enough to dma xfer the fw image).
In the meantime, hopefully no one even notices as the device-reset is
only used as a backup to the per-engine resets for handling GPU hangs.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190125132230.22221-2-chris@chris-wilson.co.uk
Simplify by using sizeof(u32) to convert from the index inside the HWSP
to the byte offset. This has the advantage of not only being shorter
(and so not upsetting checkpatch!) but that it matches use where we are
writing to byte addresses using other commands than MI_STORE_DWORD_IMM.
v2: Drop the now superfluous MI_STORE_DWORD_INDEX_SHIFT, it appears to
be a local invention so keeping it after the final use does not help to
clarify the GPU instruction.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190125120005.25191-2-chris@chris-wilson.co.uk
The A23's display pipeline is similar to the A33. Differences include:
- Display backend supports larger layers, 8192x8192 instead of 2048x2048
- TCON has DMA input
- There is no SAT module packed in the display backend
Add support for the display pipeline and its components.
As the MIPI DSI output device is not officially documented, and there
are no A23 reference devices to test it, it is not covered by this
patch.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190125032314.20915-7-wens@csie.org
In some cases, such as running a new kernel with an old device tree that
has the frontend disabled, the backend's matching frontend might be
unavailable.
When this happens, the layers should only declare support for formats
that the backend support. This partially reverts commit 1c29d263f6
("drm/sun4i: Rename sun4i_backend_layer_formats to sun4i_layer_formats")
by bringing back sun4i_backend_layer_formats, and passing it to
drm_universal_plane_init, while also dropping the modifiers list,
in the event no frontend is available.
Fixes: b636d3f97d ("drm/sun4i: frontend: Add support for the BGRX8888 input format")
Fixes: 9afe52d54b ("drm/sun4i: frontend: Add support for semi-planar YUV input formats")
Fixes: 8c8152bf4d ("drm/sun4i: frontend: Add support for planar YUV input formats")
Fixes: b2ddf277ab ("drm/sun4i: layer: Add tiled modifier support and helper")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190125032314.20915-6-wens@csie.org
The display backend does not support BGRX8888. There is also no trace
of this in the original list of supported formats before the commit
b636d3f97d ("drm/sun4i: frontend: Add support for the BGRX8888 input
format"). Nor do the backend configuration helpers handle this format.
Remove BGRX8888 from list of supported formats by the backend.
Fixes: 3d4265f89d ("drm/sun4i: backend: Add a helper and a list for supported formats")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190125032314.20915-4-wens@csie.org
The table has been unified across OSes to minimize virtualization overhead.
The MOCS table is now published as part of bspec, and versioned. Entries
are supposed to never be modified, but new ones can be added. Adding
entries increases table version. The patch includes version 1 entries.
Meaning of each entry is now explained in bspec, and user mode clients
are expected to know what each entry means. The 3 entries used for previous
platforms are still compatible with their legacy definitions, but that is
not guaranteed to be true for future platforms.
v2: Fixed SCC values, improved commit comment (Daniele)
v3: Improved MOCS table comment (Daniele)
v4: Moved new entries below gen9 ones. Put common entries into
definition to be used in multiple arrays. (Lucas)
v5: Made defines for or-ing flags. Renamed macros from MOCS_TABLE
to MOCS_ENTRIES. Switched LE_CoS to upper case. (Joonas)
v6: Removed definitions of reserved entries. (Michal)
Increased limit of entries sent to the hardware on gen11+.
v7: Simplify table as done for previou gens (Lucas)
v8: Rebase on cached number of entries per-platform and use new
MOCS_ENTRY() macro (Lucas)
v9: Update comment (from Tomasz)
BSpec: 34007
BSpec: 560
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190124000604.18861-8-lucas.demarchi@intel.com
Instead of considering we have defined entries for any index in the
table, let's keep track of the ones we explicitly defined. This will
allow Gen 11 to have it's new table defined in which we have holes of
undefined entries.
Repeated comments about the meaning of undefined entries were removed
since they are overly verbose and copy-pasted in several functions: now
the definition is in the top only.
v2: add helper function to get the index (from Chris)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190124000604.18861-6-lucas.demarchi@intel.com
