Don't enable auto-eoi if the hypervisor recommends otherwise. This will
enable vAPIC functionality if available.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 1b028f784e introduced two mmap() bases for 32-bit syscalls and for
64-bit syscalls. The mmap() code in x86 was modified to handle the
separation, but the patch series missed to update the hugetlb code.
As a consequence a 32bit application mapping a file on hugetlbfs uses the
64-bit mmap base for address space allocation, which fails.
Adjust the hugetlb mapping code to use the proper bases depending on the
syscall invocation mode (64-bit or compat).
[ tglx: Massaged changelog and switched from asm/compat.h to linux/compat.h ]
Fixes: commit 1b028f784e ("x86/mm: Introduce mmap_compat_base() for 32-bit mmap()")
Reported-by: kernel test robot <xiaolong.ye@intel.com>
Signed-off-by: Dmitry Safonov <dsafonov@virtuozzo.com>
Cc: 0x7f454c46@gmail.com
Cc: linux-mm@kvack.org
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Link: http://lkml.kernel.org/r/20170314114126.9280-1-dsafonov@virtuozzo.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
mmap() uses a base address, from which it starts to look for a free space
for allocation.
The base address is stored in mm->mmap_base, which is calculated during
exec(). The address depends on task's size, set rlimit for stack, ASLR
randomization. The base depends on the task size and the number of random
bits which are different for 64-bit and 32bit applications.
Due to the fact, that the base address is fixed, its mmap() from a compat
(32bit) syscall issued by a 64bit task will return a address which is based
on the 64bit base address and does not fit into the 32bit address space
(4GB). The returned pointer is truncated to 32bit, which results in an
invalid address.
To solve store a seperate compat address base plus a compat legacy address
base in mm_struct. These bases are calculated at exec() time and can be
used later to address the 32bit compat mmap() issued by 64 bit
applications.
As a consequence of this change 32-bit applications issuing a 64-bit
syscall (after doing a long jump) will get a 64-bit mapping now. Before
this change 32-bit applications always got a 32bit mapping.
[ tglx: Massaged changelog and added a comment ]
Signed-off-by: Dmitry Safonov <dsafonov@virtuozzo.com>
Cc: 0x7f454c46@gmail.com
Cc: linux-mm@kvack.org
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Link: http://lkml.kernel.org/r/20170306141721.9188-4-dsafonov@virtuozzo.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The location of the ERROR and BUSY status bits depends on the descriptor
index, i.e. the CPU, of the message. Since this index does not change,
there is no need to calculate the mmr and index location during message
processing. The less work we do in the hot path the better.
Add status_mmr and status_index fields to bau_control and compute their
values during initialization. Add kerneldoc descriptions for the new
fields. Update uv*_wait_completion to use these fields rather than
receiving the information as parameters.
Signed-off-by: Andrew Banman <abanman@hpe.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Mike Travis <mike.travis@hpe.com>
Cc: sivanich@hpe.com
Cc: rja@hpe.com
Cc: akpm@linux-foundation.org
Link: http://lkml.kernel.org/r/1489077734-111753-5-git-send-email-abanman@hpe.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Move the bau_operations declaration after bau struct declarations so the
bau structs can be referenced when adding new functions to
bau_operations. That way we avoid forward declarations of the bau
structs.
Likewise, move uv*_bau_ops structs down to avoid forward declarations of
new functions defined in the same file. Declare these structs __initconst
since they are only used during initialization. Similarly, declare the
bau_operations ops instance __ro_after_init as it is read-only after
initialization.
This is a preparatory patch for adding wait_completion to bau_operations.
Signed-off-by: Andrew Banman <abanman@hpe.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Mike Travis <mike.travis@hpe.com>
Cc: sivanich@hpe.com
Cc: rja@hpe.com
Cc: akpm@linux-foundation.org
Link: http://lkml.kernel.org/r/1489077734-111753-4-git-send-email-abanman@hpe.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Baytrail PMIC vs. PMU race fixes from Hans de Goede
This time the right version (v4), with the compile fix.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Pull x86 fixes from Thomas Gleixner:
- a fix for the kexec/purgatory regression which was introduced in the
merge window via an innocent sparse fix. We could have reverted that
commit, but on deeper inspection it turned out that the whole
machinery is neither documented nor robust. So a proper cleanup was
done instead
- the fix for the TLB flush issue which was discovered recently
- a simple typo fix for a reboot quirk
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tlb: Fix tlb flushing when lguest clears PGE
kexec, x86/purgatory: Unbreak it and clean it up
x86/reboot/quirks: Fix typo in ASUS EeeBook X205TA reboot quirk
Fengguang reported random corruptions from various locations on x86-32
after commits d2852a2240 ("arch: add ARCH_HAS_SET_MEMORY config") and
9d876e79df ("bpf: fix unlocking of jited image when module ronx not set")
that uses the former. While x86-32 doesn't have a JIT like x86_64, the
bpf_prog_lock_ro() and bpf_prog_unlock_ro() got enabled due to
ARCH_HAS_SET_MEMORY, whereas Fengguang's test kernel doesn't have module
support built in and therefore never had the DEBUG_SET_MODULE_RONX setting
enabled.
After investigating the crashes further, it turned out that using
set_memory_ro() and set_memory_rw() didn't have the desired effect, for
example, setting the pages as read-only on x86-32 would still let
probe_kernel_write() succeed without error. This behavior would manifest
itself in situations where the vmalloc'ed buffer was accessed prior to
set_memory_*() such as in case of bpf_prog_alloc(). In cases where it
wasn't, the page attribute changes seemed to have taken effect, leading to
the conclusion that a TLB invalidate didn't happen. Moreover, it turned out
that this issue reproduced with qemu in "-cpu kvm64" mode, but not for
"-cpu host". When the issue occurs, change_page_attr_set_clr() did trigger
a TLB flush as expected via __flush_tlb_all() through cpa_flush_range(),
though.
There are 3 variants for issuing a TLB flush: invpcid_flush_all() (depends
on CPU feature bits X86_FEATURE_INVPCID, X86_FEATURE_PGE), cr4 based flush
(depends on X86_FEATURE_PGE), and cr3 based flush. For "-cpu host" case in
my setup, the flush used invpcid_flush_all() variant, whereas for "-cpu
kvm64", the flush was cr4 based. Switching the kvm64 case to cr3 manually
worked fine, and further investigating the cr4 one turned out that
X86_CR4_PGE bit was not set in cr4 register, meaning the
__native_flush_tlb_global_irq_disabled() wrote cr4 twice with the same
value instead of clearing X86_CR4_PGE in the first write to trigger the
flush.
It turned out that X86_CR4_PGE was cleared from cr4 during init from
lguest_arch_host_init() via adjust_pge(). The X86_FEATURE_PGE bit is also
cleared from there due to concerns of using PGE in guest kernel that can
lead to hard to trace bugs (see bff672e630 ("lguest: documentation V:
Host") in init()). The CPU feature bits are cleared in dynamic
boot_cpu_data, but they never propagated to __flush_tlb_all() as it uses
static_cpu_has() instead of boot_cpu_has() for testing which variant of TLB
flushing to use, meaning they still used the old setting of the host
kernel.
Clearing via setup_clear_cpu_cap(X86_FEATURE_PGE) so this would propagate
to static_cpu_has() checks is too late at this point as sections have been
patched already, so for now, it seems reasonable to switch back to
boot_cpu_has(X86_FEATURE_PGE) as it was prior to commit c109bf9599
("x86/cpufeature: Remove cpu_has_pge"). This lets the TLB flush trigger via
cr3 as originally intended, properly makes the new page attributes visible
and thus fixes the crashes seen by Fengguang.
Fixes: c109bf9599 ("x86/cpufeature: Remove cpu_has_pge")
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: bp@suse.de
Cc: Kees Cook <keescook@chromium.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: lkp@01.org
Cc: Laura Abbott <labbott@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernrl.org/r/20170301125426.l4nf65rx4wahohyl@wfg-t540p.sh.intel.com
Link: http://lkml.kernel.org/r/25c41ad9eca164be4db9ad84f768965b7eb19d9e.1489191673.git.daniel@iogearbox.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Remove the wp_works_ok member of struct cpuinfo_x86. It's an
optimization back from Linux v0.99 times where we had no fixup support
yet and did the CR0.WP test via special code in the page fault handler.
The < 0 test was an optimization to not do the special casing for each
NULL ptr access violation but just for the first one doing the WP test.
Today it serves no real purpose as the test no longer needs special code
in the page fault handler and the only call side -- mem_init() -- calls
it just once, anyway. However, Xen pre-initializes it to 1, to skip the
test.
Doing the test again for Xen should be no issue at all, as even the
commit introducing skipping the test (commit d560bc6157 ("x86, xen:
Suppress WP test on Xen")) mentioned it being ban aid only. And, in
fact, testing the patch on Xen showed nothing breaks.
The pre-fixup times are long gone and with the removal of the fallback
handling code in commit a5c2a893db ("x86, 386 removal: Remove
CONFIG_X86_WP_WORKS_OK") the kernel requires a working CR0.WP anyway.
So just get rid of the "optimization" and do the test unconditionally.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Arnd Hannemann <hannemann@nets.rwth-aachen.de>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "David S. Miller" <davem@davemloft.net>
Link: http://lkml.kernel.org/r/1486933932-585-3-git-send-email-minipli@googlemail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Provide and use a toggle helper instead of doing it with a branch.
x86_64: arch/x86/kernel/process.o
text data bss dec hex
3008 8577 16 11601 2d51 Before
2976 8577 16 11569 2d31 After
i386: arch/x86/kernel/process.o
text data bss dec hex
2925 8673 8 11606 2d56 Before
2893 8673 8 11574 2d36 After
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Link: http://lkml.kernel.org/r/20170214081104.9244-4-khuey@kylehuey.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The debug control MSR is "highly magical" as the blockstep bit can be
cleared by hardware under not well documented circumstances.
So a task switch relying on the bit set by the previous task (according to
the previous tasks thread flags) can trip over this and not update the flag
for the next task.
To fix this its required to handle DEBUGCTLMSR_BTF when either the previous
or the next or both tasks have the TIF_BLOCKSTEP flag set.
While at it avoid branching within the TIF_BLOCKSTEP case and evaluating
boot_cpu_data twice in kernels without CONFIG_X86_DEBUGCTLMSR.
x86_64: arch/x86/kernel/process.o
text data bss dec hex
3024 8577 16 11617 2d61 Before
3008 8577 16 11601 2d51 After
i386: No change
[ tglx: Made the shift value explicit, use a local variable to make the
code readable and massaged changelog]
Originally-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kyle Huey <khuey@kylehuey.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Link: http://lkml.kernel.org/r/20170214081104.9244-3-khuey@kylehuey.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The purgatory code defines global variables which are referenced via a
symbol lookup in the kexec code (core and arch).
A recent commit addressing sparse warnings made these static and thereby
broke kexec_file.
Why did this happen? Simply because the whole machinery is undocumented and
lacks any form of forward declarations. The variable names are unspecific
and lack a prefix, so adding forward declarations creates shadow variables
in the core code. Aside of that the code relies on magic constants and
duplicate struct definitions with no way to ensure that these things stay
in sync. The section placement of the purgatory variables happened by
chance and not by design.
Unbreak kexec and cleanup the mess:
- Add proper forward declarations and document the usage
- Use common struct definition
- Use the proper common defines instead of magic constants
- Add a purgatory_ prefix to have a proper name space
- Use ARRAY_SIZE() instead of a homebrewn reimplementation
- Add proper sections to the purgatory variables [ From Mike ]
Fixes: 72042a8c7b ("x86/purgatory: Make functions and variables static")
Reported-by: Mike Galbraith <<efault@gmx.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Nicholas Mc Guire <der.herr@hofr.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: "Tobin C. Harding" <me@tobin.cc>
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1703101315140.3681@nanos
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
If an architecture uses 4level-fixup.h we don't need to do anything as
it includes 5level-fixup.h.
If an architecture uses pgtable-nop*d.h, define __ARCH_USE_5LEVEL_HACK
before inclusion of the header. It makes asm-generic code to use
5level-fixup.h.
If an architecture has 4-level paging or folds levels on its own,
include 5level-fixup.h directly.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add the TIF_PATCH_PENDING thread flag to enable the new livepatch
per-task consistency model for x86_64. The bit getting set indicates
the thread has a pending patch which needs to be applied when the thread
exits the kernel.
The bit is placed in the _TIF_ALLWORK_MASK macro, which results in
exit_to_usermode_loop() calling klp_update_patch_state() when it's set.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Acked-by: Ingo Molnar <mingo@kernel.org> # for the x86 changes
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The _TIF_ALLWORK_MASK macro automatically includes the least-significant
16 bits of the thread_info flags, which is less than obvious and tends
to create confusion and surprises when reading or modifying the code.
Define the flags explicitly.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Acked-by: Ingo Molnar <mingo@kernel.org> # for the x86 changes
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
For live patching and possibly other use cases, a stack trace is only
useful if it can be assured that it's completely reliable. Add a new
save_stack_trace_tsk_reliable() function to achieve that.
Note that if the target task isn't the current task, and the target task
is allowed to run, then it could be writing the stack while the unwinder
is reading it, resulting in possible corruption. So the caller of
save_stack_trace_tsk_reliable() must ensure that the task is either
'current' or inactive.
save_stack_trace_tsk_reliable() relies on the x86 unwinder's detection
of pt_regs on the stack. If the pt_regs are not user-mode registers
from a syscall, then they indicate an in-kernel interrupt or exception
(e.g. preemption or a page fault), in which case the stack is considered
unreliable due to the nature of frame pointers.
It also relies on the x86 unwinder's detection of other issues, such as:
- corrupted stack data
- stack grows the wrong way
- stack walk doesn't reach the bottom
- user didn't provide a large enough entries array
Such issues are reported by checking unwind_error() and !unwind_done().
Also add CONFIG_HAVE_RELIABLE_STACKTRACE so arch-independent code can
determine at build time whether the function is implemented.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Ingo Molnar <mingo@kernel.org> # for the x86 changes
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
