This patch add the SO_CNX_ADVICE socket option (setsockopt only). The
purpose is to allow an application to give feedback to the kernel about
the quality of the network path for a connected socket. The value
argument indicates the type of quality report. For this initial patch
the only supported advice is a value of 1 which indicates "bad path,
please reroute"-- the action taken by the kernel is to call
dst_negative_advice which will attempt to choose a different ECMP route,
reset the TX hash for flow label and UDP source port in encapsulation,
etc.
This facility should be useful for connected UDP sockets where only the
application can provide any feedback about path quality. It could also
be useful for TCP applications that have additional knowledge about the
path outside of the normal TCP control loop.
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The problem:
On -rt, an emulated LAPIC timer instances has the following path:
1) hard interrupt
2) ksoftirqd is scheduled
3) ksoftirqd wakes up vcpu thread
4) vcpu thread is scheduled
This extra context switch introduces unnecessary latency in the
LAPIC path for a KVM guest.
The solution:
Allow waking up vcpu thread from hardirq context,
thus avoiding the need for ksoftirqd to be scheduled.
Normal waitqueues make use of spinlocks, which on -RT
are sleepable locks. Therefore, waking up a waitqueue
waiter involves locking a sleeping lock, which
is not allowed from hard interrupt context.
cyclictest command line:
This patch reduces the average latency in my tests from 14us to 11us.
Daniel writes:
Paolo asked for numbers from kvm-unit-tests/tscdeadline_latency
benchmark on mainline. The test was run 1000 times on
tip/sched/core 4.4.0-rc8-01134-g0905f04:
./x86-run x86/tscdeadline_latency.flat -cpu host
with idle=poll.
The test seems not to deliver really stable numbers though most of
them are smaller. Paolo write:
"Anything above ~10000 cycles means that the host went to C1 or
lower---the number means more or less nothing in that case.
The mean shows an improvement indeed."
Before:
min max mean std
count 1000.000000 1000.000000 1000.000000 1000.000000
mean 5162.596000 2019270.084000 5824.491541 20681.645558
std 75.431231 622607.723969 89.575700 6492.272062
min 4466.000000 23928.000000 5537.926500 585.864966
25% 5163.000000 1613252.750000 5790.132275 16683.745433
50% 5175.000000 2281919.000000 5834.654000 23151.990026
75% 5190.000000 2382865.750000 5861.412950 24148.206168
max 5228.000000 4175158.000000 6254.827300 46481.048691
After
min max mean std
count 1000.000000 1000.00000 1000.000000 1000.000000
mean 5143.511000 2076886.10300 5813.312474 21207.357565
std 77.668322 610413.09583 86.541500 6331.915127
min 4427.000000 25103.00000 5529.756600 559.187707
25% 5148.000000 1691272.75000 5784.889825 17473.518244
50% 5160.000000 2308328.50000 5832.025000 23464.837068
75% 5172.000000 2393037.75000 5853.177675 24223.969976
max 5222.000000 3922458.00000 6186.720500 42520.379830
[Patch was originaly based on the swait implementation found in the -rt
tree. Daniel ported it to mainline's version and gathered the
benchmark numbers for tscdeadline_latency test.]
Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: linux-rt-users@vger.kernel.org
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1455871601-27484-4-git-send-email-wagi@monom.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
I ran into this issue while debugging an early boot problem. The system
hit a BUG_ON() but report bug failed to print the line number and file
name. The reason being that the system was running in real mode and
report_bug() searches for addresses in the PAGE_OFFSET+ region.
Suggested-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
__xchg_called_with_bad_pointer() can't tell us which code uses {cmp}xchg
with an unsupported size, and no error is reported until the link stage.
To make such problems easier to debug, use BUILD_BUG_ON_MSG() instead.
Signed-off-by: pan xinhui <xinhui.pan@linux.vnet.ibm.com>
[mpe: Tweak change log wording & add relaxed/acquire]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
fixup
Most current OpenPOWER platforms have an AST BMC, so add graphics
support via the AST DRM driver.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There are a few firmware-provided interfaces for OpenPOWER platforms:
the PRD infrastructure, IPMI support, and MTD access to the PNOR flash.
This change adds these to powernv_defconfig
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This change adds a defconfig for the non-virtualised power platforms,
based on pseries_defconfig, but without pseries, and little-endian,
and no OF trampoline.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Acked-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add a cputable entry for POWER9. More code is required to actually
boot and run on a POWER9 but this gets the base piece in which we can
start building on.
Copies over from POWER8 except for:
- Adds a new CPU_FTR_ARCH_300 bit to start hanging new architecture
features from (in subsequent patches).
- Advertises new user features bits PPC_FEATURE2_ARCH_3_00 &
HAS_IEEE128 when on POWER9.
- Drops CPU_FTR_SUBCORE.
- Drops PMU code and machine check.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Use defines for literals __init_tlb_power[78] rather than hand coding
them.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Subcores isn't really part of the 2.07 architecture but currently we
turn it on using the 2.07 feature bit. Subcores is really a POWER8
specific feature.
This adds a new CPU_FTR bit just for subcores and moves the subcore
init code over to use this.
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When initialising OPAL interfaces, there is a possibility that
opal_msglog_init() may fail to initialise the msglog/memory console.
Fix opal_msglog_sysfs_init() so it doesn't try to create sysfs entry for
the msglog if this occurs.
Suggested-by: Joel Stanley <joel@jms.id.au>
Fixes: 9b4fffa149 ("powerpc/powernv: new function to access OPAL msglog")
Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We can get a hash pte fault with 4k base page size and find the pte
already inserted with 64K base page size. In that case we need to clear
the existing slot information from the old pte. Fix this correctly
With THP, we also clear the slot information with respect to all
the 64K hash pte mapping that 16MB page. They are all invalid
now. This make sure we don't find the slot valid when we fault with
4k base page size. Finding the slot valid should not result in any wrong
behavior because we do check again in hash page table for the validity.
But we can avoid that check completely.
Fixes: a43c0eb836 ("powerpc/mm: Convert 4k hash insert to C")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
During error recovery, the device could be removed as part of the
partial hotplug. The criterion used to come with partial hotplug
is: if the device driver provides error_detected(), slot_reset()
and resume() callbacks, it's immune from hotplug. Otherwise,
it's going to experience partial hotplug during EEH recovery. But
the criterion isn't correct enough: mlx4_core driver for Mellanox
adapters provides error_detected(), slot_reset() callbacks, but
resume() isn't there. Those Mellanox adapters won't be to involved
in the partial hotplug.
This fixes the criterion to a practical one: adpater with driver
that provides error_detected(), slot_reset() will be immune from
partial hotplug. resume() isn't mandatory.
Fixes: f2da4ccf ("powerpc/eeh: More relaxed hotplug criterion")
Cc: stable@vger.kernel.org #v4.4+
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Pull powerpc fixes from Michael Ellerman:
- Fix build error on 32-bit with checkpoint restart from Aneesh Kumar
- Fix dedotify for binutils >= 2.26 from Andreas Schwab
- Don't trace hcalls on offline CPUs from Denis Kirjanov
- eeh: Fix stale cached primary bus from Gavin Shan
- eeh: Fix stale PE primary bus from Gavin Shan
- mm: Fix Multi hit ERAT cause by recent THP update from Aneesh Kumar K.V
- ioda: Set "read" permission when "write" is set from Alexey Kardashevskiy
* tag 'powerpc-4.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/ioda: Set "read" permission when "write" is set
powerpc/mm: Fix Multi hit ERAT cause by recent THP update
powerpc/powernv: Fix stale PE primary bus
powerpc/eeh: Fix stale cached primary bus
powerpc/pseries: Don't trace hcalls on offline CPUs
powerpc: Fix dedotify for binutils >= 2.26
powerpc/book3s_32: Fix build error with checkpoint restart
As discussed earlier, we attempt to enforce protection keys in
software.
However, the code checks all faults to ensure that they are not
violating protection key permissions. It was assumed that all
faults are either write faults where we check PKRU[key].WD (write
disable) or read faults where we check the AD (access disable)
bit.
But, there is a third category of faults for protection keys:
instruction faults. Instruction faults never run afoul of
protection keys because they do not affect instruction fetches.
So, plumb the PF_INSTR bit down in to the
arch_vma_access_permitted() function where we do the protection
key checks.
We also add a new FAULT_FLAG_INSTRUCTION. This is because
handle_mm_fault() is not passed the architecture-specific
error_code where we keep PF_INSTR, so we need to encode the
instruction fetch information in to the arch-generic fault
flags.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20160212210224.96928009@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Implement cmpxchg{,64}_relaxed and atomic{,64}_cmpxchg_relaxed, based on
which _release variants can be built.
To avoid superfluous barriers in _acquire variants, we implement these
operations with assembly code rather use __atomic_op_acquire() to build
them automatically.
For the same reason, we keep the assembly implementation of fully
ordered cmpxchg operations.
However, we don't do the similar for _release, because that will require
putting barriers in the middle of ll/sc loops, which is probably a bad
idea.
Note cmpxchg{,64}_relaxed and atomic{,64}_cmpxchg_relaxed are not
compiler barriers.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Implement xchg{,64}_relaxed and atomic{,64}_xchg_relaxed, based on these
_relaxed variants, release/acquire variants and fully ordered versions
can be built.
Note that xchg{,64}_relaxed and atomic_{,64}_xchg_relaxed are not
compiler barriers.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
On powerpc, acquire and release semantics can be achieved with
lightweight barriers("lwsync" and "ctrl+isync"), which can be used to
implement __atomic_op_{acquire,release}.
For release semantics, since we only need to ensure all memory accesses
that issue before must take effects before the -store- part of the
atomics, "lwsync" is what we only need. On the platform without
"lwsync", "sync" should be used. Therefore in __atomic_op_release() we
use PPC_RELEASE_BARRIER.
For acquire semantics, "lwsync" is what we only need for the similar
reason. However on the platform without "lwsync", we can use "isync"
rather than "sync" as an acquire barrier. Therefore in
__atomic_op_acquire() we use PPC_ACQUIRE_BARRIER, which is barrier() on
UP, "lwsync" if available and "isync" otherwise.
Implement atomic{,64}_{add,sub,inc,dec}_return_relaxed, and build other
variants with these helpers.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
I spent some time trying to use kgdb and debugged my inability to
resume from kgdb_handle_breakpoint(). NIP is not incremented
and that leads to a loop in the debugger.
I've tested this lightly on a virtual instance with KDB enabled.
After the patch, I am able to get the "go" command to work as
expected.
Signed-off-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Quite often drivers set only "write" permission assuming that this
includes "read" permission as well and this works on plenty of
platforms. However IODA2 is strict about this and produces an EEH when
"read" permission is not set and reading happens.
This adds a workaround in the IODA code to always add the "read" bit
when the "write" bit is set.
Fixes: 10b35b2b74 ("powerpc/powernv: Do not set "read" flag if direction==DMA_NONE")
Cc: stable@vger.kernel.org # 4.2+
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Tested-by: Douglas Miller <dougmill@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit 28856a9e52 missed the addition of the crypto/xts.h include file
for different architecture-specific AES implementations.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The patch centralizes the XTS key check logic into the service function
xts_check_key which is invoked from the different XTS implementations.
With this, the XTS implementations in ARM, ARM64, PPC and S390 have now
a sanity check for the XTS keys similar to the other arches.
In addition, this service function received a check to ensure that the
key != the tweak key which is mandated by FIPS 140-2 IG A.9. As the
check is not present in the standards defining XTS, it is only enforced
in FIPS mode of the kernel.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This adds real and virtual mode handlers for the H_PUT_TCE_INDIRECT and
H_STUFF_TCE hypercalls for user space emulated devices such as IBMVIO
devices or emulated PCI. These calls allow adding multiple entries
(up to 512) into the TCE table in one call which saves time on
transition between kernel and user space.
The current implementation of kvmppc_h_stuff_tce() allows it to be
executed in both real and virtual modes so there is one helper.
The kvmppc_rm_h_put_tce_indirect() needs to translate the guest address
to the host address and since the translation is different, there are
2 helpers - one for each mode.
This implements the KVM_CAP_PPC_MULTITCE capability. When present,
the kernel will try handling H_PUT_TCE_INDIRECT and H_STUFF_TCE if these
are enabled by the userspace via KVM_CAP_PPC_ENABLE_HCALL.
If they can not be handled by the kernel, they are passed on to
the user space. The user space still has to have an implementation
for these.
Both HV and PR-syle KVM are supported.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Upcoming multi-tce support (H_PUT_TCE_INDIRECT/H_STUFF_TCE hypercalls)
will validate TCE (not to have unexpected bits) and IO address
(to be within the DMA window boundaries).
This introduces helpers to validate TCE and IO address. The helpers are
exported as they compile into vmlinux (to work in realmode) and will be
used later by KVM kernel module in virtual mode.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
SPAPR_TCE_SHIFT is used in few places only and since IOMMU_PAGE_SHIFT_4K
can be easily used instead, remove SPAPR_TCE_SHIFT.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
At the moment pages used for TCE tables (in addition to pages addressed
by TCEs) are not counted in locked_vm counter so a malicious userspace
tool can call ioctl(KVM_CREATE_SPAPR_TCE) as many times as
RLIMIT_NOFILE and lock a lot of memory.
This adds counting for pages used for TCE tables.
This counts the number of pages required for a table plus pages for
the kvmppc_spapr_tce_table struct (TCE table descriptor) itself.
This changes release_spapr_tce_table() to store @npages on stack to
avoid calling kvmppc_stt_npages() in the loop (tiny optimization,
probably).
This does not change the amount of used memory.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
At the moment only spapr_tce_tables updates are protected against races
but not lookups. This fixes missing protection by using RCU for the list.
As lookups also happen in real mode, this uses
list_for_each_entry_lockless() (which is expected not to access any
vmalloc'd memory).
This converts release_spapr_tce_table() to a RCU scheduled handler.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
This reworks the existing H_PUT_TCE/H_GET_TCE handlers to have following
patches applied nicer.
This moves the ioba boundaries check to a helper and adds a check for
least bits which have to be zeros.
The patch is pretty mechanical (only check for least ioba bits is added)
so no change in behaviour is expected.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
This makes vmalloc_to_phys() public as there will be another user
(KVM in-kernel VFIO acceleration) for it soon. As this new user
can be compiled as a module, this exports the symbol.
As a little optimization, this changes the helper to call
vmalloc_to_pfn() instead of vmalloc_to_page() as the size of the
struct page may not be power-of-two aligned which will make gcc use
multiply instructions instead of shifts.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
asm/gpio.h is included only by linux/gpio.h, and then only when the arch
selects ARCH_HAVE_CUSTOM_GPIO_H. Only the following arches select it: arm
avr32 blackfin m68k (COLDFIRE only) sh unicore32.
Remove the unused asm/gpio.h files for the arches that do not select
ARCH_HAVE_CUSTOM_GPIO_H.
This is a follow-on to 7563bbf89d ("gpiolib/arches: Centralise
bolierplate asm/gpio.h").
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
With ppc64 we use the deposited pgtable_t to store the hash pte slot
information. We should not withdraw the deposited pgtable_t without
marking the pmd none. This ensure that low level hash fault handling
will skip this huge pte and we will handle them at upper levels.
Recent change to pmd splitting changed the above in order to handle the
race between pmd split and exit_mmap. The race is explained below.
Consider following race:
CPU0 CPU1
shrink_page_list()
add_to_swap()
split_huge_page_to_list()
__split_huge_pmd_locked()
pmdp_huge_clear_flush_notify()
// pmd_none() == true
exit_mmap()
unmap_vmas()
zap_pmd_range()
// no action on pmd since pmd_none() == true
pmd_populate()
As result the THP will not be freed. The leak is detected by check_mm():
BUG: Bad rss-counter state mm:ffff880058d2e580 idx:1 val:512
The above required us to not mark pmd none during a pmd split.
The fix for ppc is to clear the huge pte of _PAGE_USER, so that low
level fault handling code skip this pte. At higher level we do take ptl
lock. That should serialze us against the pmd split. Once the lock is
acquired we do check the pmd again using pmd_same. That should always
return false for us and hence we should retry the access. We do the
pmd_same check in all case after taking plt with
THP (do_huge_pmd_wp_page, do_huge_pmd_numa_page and
huge_pmd_set_accessed)
Also make sure we wait for irq disable section in other cpus to finish
before flipping a huge pte entry with a regular pmd entry. Code paths
like find_linux_pte_or_hugepte depend on irq disable to get
a stable pte_t pointer. A parallel thp split need to make sure we
don't convert a pmd pte to a regular pmd entry without waiting for the
irq disable section to finish.
Fixes: eef1b3ba05 ("thp: implement split_huge_pmd()")
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When PCI bus is unplugged during full hotplug for EEH recovery,
the platform PE instance (struct pnv_ioda_pe) isn't released and
it dereferences the stale PCI bus that has been released. It leads
to kernel crash when referring to the stale PCI bus.
This fixes the issue by correcting the PE's primary bus when it's
oneline at plugging time, in pnv_pci_dma_bus_setup() which is to
be called by pcibios_fixup_bus().
Cc: stable@vger.kernel.org # v4.1+
Reported-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Reported-by: Pradipta Ghosh <pradghos@in.ibm.com>
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Tested-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When PE is created, its primary bus is cached to pe->bus. At later
point, the cached primary bus is returned from eeh_pe_bus_get().
However, we could get stale cached primary bus and run into kernel
crash in one case: full hotplug as part of fenced PHB error recovery
releases all PCI busses under the PHB at unplugging time and recreate
them at plugging time. pe->bus is still dereferencing the PCI bus
that was released.
This adds another PE flag (EEH_PE_PRI_BUS) to represent the validity
of pe->bus. pe->bus is updated when its first child EEH device is
online and the flag is set. Before unplugging in full hotplug for
error recovery, the flag is cleared.
Fixes: 8cdb2833 ("powerpc/eeh: Trace PCI bus from PE")
Cc: stable@vger.kernel.org #v3.11+
Reported-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Reported-by: Pradipta Ghosh <pradghos@in.ibm.com>
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Tested-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
If a cpu is hotplugged while the hcall trace points are active, it's
possible to hit a warning from RCU due to the trace points calling into
RCU from an offline cpu, eg:
RCU used illegally from offline CPU!
rcu_scheduler_active = 1, debug_locks = 1
Make the hypervisor tracepoints conditional by using
TRACE_EVENT_FN_COND.
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
ec53500f "kvm: Add VFIO device" added a special KVM pseudo-device which is
used to handle any necessary interactions between KVM and VFIO.
Currently that device is built on x86 and ARM, but not powerpc, although
powerpc does support both KVM and VFIO. This makes things awkward in
userspace
Currently qemu prints an alarming error message if you attempt to use VFIO
and it can't initialize the KVM VFIO device. We don't want to remove the
warning, because lack of the KVM VFIO device could mean coherency problems
on x86. On powerpc, however, the error is harmless but looks disturbing,
and a test based on host architecture in qemu would be ugly, and break if
we do need the KVM VFIO device for something important in future.
There's nothing preventing the KVM VFIO device from being built for
powerpc, so this patch turns it on. It won't actually do anything, since
we don't define any of the arch_*() hooks, but it will make qemu happy and
we can extend it in future if we need to.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
CONFIG_KEYS_DEBUG_PROC_KEYS is no longer an option as /proc/keys is now
mandatory if the keyrings facility is enabled (it's used by libkeyutils in
userspace).
The defconfig references were removed with:
perl -p -i -e 's/CONFIG_KEYS_DEBUG_PROC_KEYS=y\n//' \
`git grep -l CONFIG_KEYS_DEBUG_PROC_KEYS=y`
and the integrity Kconfig fixed by hand.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Andreas Ziegler <andreas.ziegler@fau.de>
cc: Dmitry Kasatkin <dmitry.kasatkin@huawei.com>
The GPCI hcall allows for a 4K buffer but we limit the buffer to 1K.
The problem with a 1K buffer is if a request results in returning
more values than can be accomodated in the 1K buffer the request will
fail.
The buffer we are using is currently allocated on the stack and hence
limited in size. Instead use a per-CPU 4K buffer like we do with 24x7
counters (hv-24x7.c).
While here, rename the macro GPCI_MAX_DATA_BYTES to HGPCI_MAX_DATA_BYTES
for consistency with 24x7 counters.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When M64 BAR is set to Single PE mode, the PE# assigned to VF could be
sparse.
This patch restructures the code to allocate sparse PE# for VFs when M64
BAR is set to Single PE mode. Also it rename the offset to pe_num_map to
reflect the content is the PE number.
Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Each VF could have 6 BARs at most. When the total BAR size exceeds the
gate, after expanding it will also exhaust the M64 Window.
This patch limits the boundary by checking the total VF BAR size instead of
the individual BAR.
Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
At the moment 64bit-prefetchable window can be maximum 64GB, which is
currently got from device tree. This means that in shared mode the maximum
supported VF BAR size is 64GB/256=256MB. While this size could exhaust the
whole 64bit-prefetchable window. This is a design decision to set a
boundary to 64MB of the VF BAR size. Since VF BAR size with 64MB would
occupy a quarter of the 64bit-prefetchable window, this is affordable.
This patch replaces magic limit of 64MB with "gate", which is 1/4 of the
M64 Segment Size(m64_segsize >> 2) and adds comment to explain the reason
for it.
Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>
Reviewed-by: Gavin Shan <gwshan@linux.vent.ibm.com>
Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In current implementation, when VF BAR is bigger than 64MB, it uses 4 M64
BARs in Single PE mode to cover the number of VFs required to be enabled.
By doing so, several VFs would be in one VF Group and leads to interference
between VFs in the same group.
And in this patch, m64_wins is renamed to m64_map, which means index number
of the M64 BAR used to map the VF BAR. Based on Gavin's comments. Also
makes sure the VF BAR size is bigger than 32MB when M64 BAR is used in
Single PE mode.
This patch changes the design by using one M64 BAR in Single PE mode for
one VF BAR. This gives absolute isolation for VFs.
Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The alignment of IOV BAR on PowerNV platform is the total size of the IOV
BAR. No matter whether the IOV BAR is extended with number of
roundup_pow_of_two(total_vfs) or number of max PE number (256), the total
size could be calculated by (vfs_expanded * VF_BAR_size).
This patch simplifies the pnv_pci_iov_resource_alignment() by removing the
first case.
Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
On PHB3, we enable SRIOV devices by mapping IOV BAR with M64 BARs. If a
SRIOV device's IOV BAR is not 64bit-prefetchable, this is not assigned from
64bit prefetchable window, which means M64 BAR can't work on it.
The reason is PCI bridges support only 2 memory windows and the kernel code
programs bridges in the way that one window is 32bit-nonprefetchable and
the other one is 64bit-prefetchable. So if devices' IOV BAR is 64bit and
non-prefetchable, it will be mapped into 32bit space and therefore M64
cannot be used for it.
This patch makes this explicit and truncate IOV resource in this case to
save MMIO space.
Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The EEH debugfs handlers have same prototype. This introduces
a macro to define them, then to simplify the code. No logical
changes.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add 'P' command with optional task_struct address to dump all/one task's
information: task pointer, kernel stack pointer, PID, PPID, state
(interpreted), CPU where (last) running, and command.
Signed-off-by: Douglas Miller <dougmill@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
