Commit 5958d19a14 checks for prefetchable m64 BARs by comparing the
addresses instead of using resource flags. This broke SR-IOV as the m64
check in pnv_pci_ioda_fixup_iov_resources() fails.
The condition in pnv_pci_window_alignment() also changed to checking
only IORESOURCE_MEM_64 instead of both IORESOURCE_MEM_64 and
IORESOURCE_PREFETCH.
Revert these cases to the previous behaviour, adding a new helper function
to do so. This is named pnv_pci_is_m64_flags() to make it clear this
function is only looking at resource flags and should not be relied on for
non-SRIOV resources.
Fixes: 5958d19a14 ("Fix incorrect PE reservation attempt on some 64-bit BARs")
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
NO_IRQ has been == 0 on powerpc for just over ten years (since commit
0ebfff1491 ("[POWERPC] Add new interrupt mapping core and change
platforms to use it")). It's also 0 on most other arches.
Although it's fairly harmless, every now and then it causes confusion
when a driver is built on powerpc and another arch which doesn't define
NO_IRQ. There's at least 6 definitions of NO_IRQ in drivers/, at least
some of which are to work around that problem.
So we'd like to remove it. This is fairly trivial in the arch code, we
just convert:
if (irq == NO_IRQ) to if (!irq)
if (irq != NO_IRQ) to if (irq)
irq = NO_IRQ; to irq = 0;
return NO_IRQ; to return 0;
And a few other odd cases as well.
At least for now we keep the #define NO_IRQ, because there is driver
code that uses NO_IRQ and the fixes to remove those will go via other
trees.
Note we also change some occurrences in PPC sound drivers, drivers/ps3,
and drivers/macintosh.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When we merge two contiguous partitions whose signatures are marked
NVRAM_SIG_FREE, We need update prev's length and checksum, then write it
to nvram, not cur's. So lets fix this mistake now.
Also use memset instead of strncpy to set the partition's name. It's
more readable if we want to fill up with duplicate chars .
Fixes: fa2b4e54d4 ("powerpc/nvram: Improve partition removal")
Signed-off-by: Pan Xinhui <xinhui.pan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
mtmsrd with L=1 only affects MSR_EE and MSR_RI bits, and we always
know what state those bits are, so the kernel MSR does not need to be
loaded when modifying them.
mtmsrd is often in the critical execution path, so avoiding dependency
on even L1 load is noticable. On a POWER8 this saves about 3 cycles
from the syscall path, and possibly a few from other exception returns
(not measured).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The mflr r10 instruction was left over from when the code used LR to
branch to system_call_entry from the exception handler. That was
changed by commit 6a404806df ("powerpc: Avoid link stack corruption in
MMU on syscall entry path") to use the count register. The value is
never used now, so mflr can be removed, and r10 can be used for storage
rather than spilling to the SPR scratch register.
The scratch register spill causes a long pipeline stall due to the SPR
read after write. This change brings getppid syscall cost from 406 to
376 cycles on POWER8. getppid for non-relocatable case is 371 cycles.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
For hugetlb to work with 4K page size, we need MAX_ORDER to be 13 or
more. When switching from a 64K page size to 4K linux page size using
make oldconfig, we end up with a CONFIG_FORCE_MAX_ZONEORDER value of 9.
This results in a 16M hugepage beiing considered as a gigantic huge page
which in turn results in failure to setup hugepages if gigantic hugepage
support is not enabled.
This also results in kernel crash with 4K radix configuration. We
hit the below BUG_ON on radix:
kernel BUG at mm/huge_memory.c:364!
Oops: Exception in kernel mode, sig: 5 [#1]
SMP NR_CPUS=2048 NUMA PowerNV
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.8.0-rc1-00006-gbae9cc6 #1
task: c0000000f1af8000 task.stack: c0000000f1aec000
NIP: c000000000c5fa0c LR: c000000000c5f9d8 CTR: c000000000c5f9a4
REGS: c0000000f1aef920 TRAP: 0700 Not tainted (4.8.0-rc1-00006-gbae9cc6)
MSR: 9000000102029033 <SF,HV,VEC,EE,ME,IR,DR,RI,LE,TM[E]> CR: 24000844 XER: 00000000
CFAR: c000000000c5f9e0 SOFTE: 1
....
NIP [c000000000c5fa0c] hugepage_init+0x68/0x238
LR [c000000000c5f9d8] hugepage_init+0x34/0x238
Fixes: a7ee539584 ("powerpc/Kconfig: Update config option based on page size")
Cc: stable@vger.kernel.org # v4.7+
Reported-by: Santhosh <santhog4@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The HMI (Hypervisor Maintenance Interrupt) is defined by the
architecture to be higher priority than other maskable interrupts, so
replay it first, as a best-effort to replay according to hardware
priorities.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In our linker script we open code the list of text sections, because we
need to include the __ftr_alt sections, which are arch-specific.
This means we can't use TEXT_TEXT as defined in vmlinux.lds.h, and so we
don't have the MEM_KEEP() logic for memory hotplug sections.
If we build the kernel with the gold linker, and with CONFIG_MEMORY_HOTPLUG=y,
we see that functions marked __meminit can end up outside of the
_stext/_etext range, and also outside of _sinittext/_einittext, eg:
c000000000000000 T _stext
c0000000009e0000 A _etext
c0000000009e3f18 T hash__vmemmap_create_mapping
c000000000ca0000 T _sinittext
c000000000d00844 T _einittext
This causes them to not be recognised as text by is_kernel_text(), and
prevents them being patched by jump_label (and presumably ftrace/kprobes
etc.).
Fix it by adding MEM_KEEP() directives, mirroring what TEXT_TEXT does.
This isn't a problem when CONFIG_MEMORY_HOTPLUG=n, because we use the
standard INIT_TEXT_SECTION() and EXIT_TEXT macros from vmlinux.lds.h.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently the _GLOBAL() macro unilaterally sets the assembler section to
".text" at the start of the macro. This is rude as the caller may be
using a different section.
So let the caller decide which section to emit the code into. On big
endian we do need to switch to the ".opd" section to emit the OPD, but
do that with pushsection/popsection, thereby leaving the original
section intact.
I verified that the order of all entries in System.map is unchanged
after this patch. The actual addresses shift around slightly so you
can't just diff the System.map.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Rather than forcing the whole function into the ".kprobes.text" section,
just add the symbol's address to the kprobe blacklist.
This also lets us drop the three versions of the_KPROBE macro, in
exchange for just one version of _ASM_NOKPROBE_SYMBOL - which is a good
cleanup.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently we mark the C implementations of some exception handlers as
__kprobes. This has the effect of putting them in the ".kprobes.text"
section, which separates them from the rest of the text.
Instead we can use the blacklist macros to add the symbols to a
blacklist which kprobes will check. This allows the linker to move
exception handler functions close to callers and avoids trampolines in
larger kernels.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Reword change log a bit]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Pull powerpc fixes from Michael Ellerman:
"Fixes for code merged this cycle:
- Fix restore of SPRs upon wake up from hypervisor state loss from
Gautham R Shenoy
- Fix the state of root PE from Gavin Shan
- Detach from PE on releasing PCI device from Gavin Shan
- Fix size of NUM_CPU_FTR_KEYS on 32-bit
- Fix missed TCE invalidations that should fallback to OPAL"
* tag 'powerpc-4.8-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/powernv/pci: Fix missed TCE invalidations that should fallback to OPAL
powerpc/powernv: Detach from PE on releasing PCI device
powerpc/powernv: Fix the state of root PE
powerpc/kernel: Fix size of NUM_CPU_FTR_KEYS on 32-bit
powerpc/powernv: Fix restore of SPRs upon wake up from hypervisor state loss
Two stubs are added:
o kvm_arch_has_vcpu_debugfs(): must return true if the arch
supports creating debugfs entries in the vcpu debugfs dir
(which will be implemented by the next commit)
o kvm_arch_create_vcpu_debugfs(): code that creates debugfs
entries in the vcpu debugfs dir
For x86, this commit introduces a new file to avoid growing
arch/x86/kvm/x86.c even more.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In commit f0228c4130 ("powerpc/powernv/pci: Fallback to OPAL for TCE
invalidations"), we added logic to fallback to OPAL for doing TCE
invalidations if we can't do it in Linux.
Ben sent a v2 of the patch, containing these additional call sites, but
I had already applied v1 and didn't notice. So fix them now.
Fixes: f0228c4130 ("powerpc/powernv/pci: Fallback to OPAL for TCE invalidations")
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The PCI hotplug can be part of EEH error recovery. The @pdn and
the device's PE number aren't removed and added afterwords. The
PE number in @pdn should be set to an invalid one. Otherwise, the
PE's device count is decreased on removing devices while failing
to be increased on adding devices. It leads to unbalanced PE's
device count and make normal PCI hotplug path broken.
Fixes: c5f7700bbd ("powerpc/powernv: Dynamically release PE")
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Pull uaccess fixes from Al Viro:
"Fixes for broken uaccess primitives - mostly lack of proper zeroing
in copy_from_user()/get_user()/__get_user(), but for several
architectures there's more (broken clear_user() on frv and
strncpy_from_user() on hexagon)"
* 'uaccess-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (28 commits)
avr32: fix copy_from_user()
microblaze: fix __get_user()
microblaze: fix copy_from_user()
m32r: fix __get_user()
blackfin: fix copy_from_user()
sparc32: fix copy_from_user()
sh: fix copy_from_user()
sh64: failing __get_user() should zero
score: fix copy_from_user() and friends
score: fix __get_user/get_user
s390: get_user() should zero on failure
ppc32: fix copy_from_user()
parisc: fix copy_from_user()
openrisc: fix copy_from_user()
nios2: fix __get_user()
nios2: copy_from_user() should zero the tail of destination
mn10300: copy_from_user() should zero on access_ok() failure...
mn10300: failing __get_user() and get_user() should zero
mips: copy_from_user() must zero the destination on access_ok() failure
ARC: uaccess: get_user to zero out dest in cause of fault
...
The PE for root bus (root PE) can be removed because of PCI hot
remove in EEH recovery path for fenced PHB error. We need update
@phb->root_pe_populated accordingly so that the root PE can be
populated again in forthcoming PCI hot add path. Also, the PE
shouldn't be destroyed as it's global and reserved resource.
Fixes: c5f7700bbd ("powerpc/powernv: Dynamically release PE")
Reported-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Normally, when MSR[VSX/VR/SPE] bits == 1, the used_vsr/used_vr/used_spe
bit have already been set. However when loading a signal frame from user
space we need to explicitly set used_vsr/used_vr/used_spe to make them
consistent with the MSR bits from the signal frame.
For example, CRIU application, who utilizes sigreturn to restore
checkpointed process, will lead to the case where MSR[VSX] bit is active
in signal frame, but used_vsr bit is not set in the kernel. (the same
applies to VR/SPE).
This patch fixes this by always setting used_* bit when MSR related bits
are active in signal frame and we are doing sigreturn.
Based on a proposal by Benh.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
[mpe: Massage change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The ckpt_regs usage in gpr32_set_common/gpr32_get_common() will lead to
following cppcheck error at ifndef CONFIG_PPC_TRANSACTIONAL_MEM case:
[arch/powerpc/kernel/ptrace.c:2062]:
(error) Uninitialized variable: ckpt_regs
[arch/powerpc/kernel/ptrace.c:2130]:
(error) Uninitialized variable: ckpt_regs
The problem is due to gpr32_set_common() used ckpt_regs variable which
only makes sense at #ifdef CONFIG_PPC_TRANSACTIONAL_MEM.
This patch fix this issue by passing in "regs" parameter instead.
Reported-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The message is missing a \n, add it. Switch to pr_warn(), it's shorter
and less ugly.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
POWER9 DD1 requires pte to be marked invalid (V=0) before updating
it with the new value. This makes this distinction for the different
revisions.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
POWER9 DD1 uses RTS - 28 for the RTS value but other revisions use
RTS - 31. This makes this distinction for the different revisions
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The of_node for the SB600 (io-bridge) has its device_type set to
'io-bridge' Set it to 'isa' so that it can be found by
isa_bridge_find_early() instead of using patches in the kernel.
Signed-off-by: Darren Stevens <darren@stevens-zone.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The device tree on the Nemo passes all of the i8259 interrupts with
numbers between 212 and 222, and points their interrupt-parent property
to the pasemi-opic, requiring custom patches to the kernel. Fix the
values so that they can be controlled by the generic ppc i8259 code.
Signed-off-by: Darren Stevens <darren@stevens-zone.net>
[mpe: Rework deeply nested if and boundary checks]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add config option for the Nemo motherboard used in the Amigaone X1000.
This is a custom PASemi board with an AMD SB600 southbridge, and needs
some patches to it device tree. This option will be used to build these
into the kernel
Signed-off-by: Darren Stevens <darren@stevens-zone.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Trivial fix to spelling mistake in dev_warn message and remove
extraneous trailing whitespace at end of the message.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit 2578bfae84 ("[POWERPC] Create and use CONFIG_WORD_SIZE") added
CONFIG_WORD_SIZE, and suggests that other arches were going to do
likewise.
But that never happened, powerpc is the only architecture which uses it.
So switch to using a simple make variable, BITS, like x86, sh, sparc and
tile. It is also easier to spell and simpler, avoiding any confusion
about whether it's defined due to ordering of make vs kconfig.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Some of the rules in the boot Makefile use @ to hide the command, this
means "make V=1" doesn't show them, which is confusing.
So use the Kbuild standard $(Q) which means KBUILD_VERBOSE=1 or V=1 will
work as expected.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In fact it makes no sense at all to have this defined on little endian
builds. Since we disabled the 32-bit VDSO on little endian, we don't
build any 32-bit code when building a little endian kernel.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The LOAD_HANDLER macro requires that you have previously loaded "reg"
with PACAKBASE. Although that gives callers flexibility to get PACAKBASE
in some interesting way, none of the callers actually do that. So fold
the load of PACAKBASE into the macro, making it simpler for callers to
use correctly.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The comment for LOAD_HANDLER() was wrong. The part about kdump has not
been true since 1f6a93e4c3 ("powerpc: Make it possible to move the
interrupt handlers away from the kernel").
Describe how it currently works, and combine the two separate comments
into one.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently, if userspace or the kernel accesses a completely bogus address,
for example with any of bits 46-59 set, we first take an SLB miss interrupt,
install a corresponding SLB entry with VSID 0, retry the instruction, then
take a DSI/ISI interrupt because there is no HPT entry mapping the address.
However, by the time of the second interrupt, the Come-From Address Register
(CFAR) has been overwritten by the rfid instruction at the end of the SLB
miss interrupt handler. Since bogus accesses can often be caused by a
function return after the stack has been overwritten, the CFAR value would
be very useful as it could indicate which function it was whose return had
led to the bogus address.
This patch adds code to create a full exception frame in the SLB miss handler
in the case of a bogus address, rather than inserting an SLB entry with a
zero VSID field. Then we call a new slb_miss_bad_addr() function in C code,
which delivers a signal for a user access or creates an oops for a kernel
access. In the latter case the oops message will show the CFAR value at the
time of the access.
In the case of the radix MMU, a segment miss interrupt indicates an access
outside the ranges mapped by the page tables. Previously this was handled
by the code for an unrecoverable SLB miss (one with MSR[RI] = 0), which is
not really correct. With this patch, we now handle these interrupts with
slb_miss_bad_addr(), which is much more consistent.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In commit 31cdd0c39c ("powerpc/xmon: Fix SPR read/write commands and
add command to dump SPRs") I added two uses of the "ld" instruction in
spr_access.S. "ld" is a 64-bit instruction, so shouldn't be used on
32-bit CPUs.
Replace it with PPC_LL which is a macro that gives us either "ld" or
"lwz" depending on whether we're 64 or 32-bit.
Fixes: 31cdd0c39c ("powerpc/xmon: Fix SPR read/write commands and add command to dump SPRs")
Cc: stable@vger.kernel.org # v4.7+
Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Another set of things that are only called from assembler and so need
prototypes to keep sparse happy.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Firmware Assisted Dump is a facility to dump kernel core with assistance
from firmware. As part of this process the kernel ELF ABI version is
stored in the core file.
Currently fadump.h defines this to 0 if it is not already defined. This
clashes with a define in elf.h which sets it based on the current task -
not based on the kernel's ELF ABI version.
Use the compiler-provided #define _CALL_ELF which tells us the ELF ABI
version of the kernel to set e_flags, this matches what binutils does.
Remove the definition in fadump.h, which becomes unused.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Adjust jump labels according to the current Linux coding style convention.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
The number of CPU feature keys is meant to map 1:1 to the number of CPU
feature flags defined in cputable.h, and the latter must fit in an
unsigned long.
In commit 4db7327194 ("powerpc: Add option to use jump label for
cpu_has_feature()"), I incorrectly defined NUM_CPU_FTR_KEYS to 64.
There should be no real adverse consequences of this bug, other than us
allocating too many keys.
Fix it by using BITS_PER_LONG.
Fixes: 4db7327194 ("powerpc: Add option to use jump label for cpu_has_feature()")
Tested-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
pnv_wakeup_tb_loss() currently expects cr4 to be "eq" if the CPU is
waking up from a complete hypervisor state loss. Hence, it currently
restores the SPR contents only if cr4 is "eq".
However, after commit bcef83a00d ("powerpc/powernv: Add platform
support for stop instruction"), on ISA v3.0 CPUs, the function
pnv_restore_hyp_resource() sets cr4 to contain the result of the
comparison between the state the CPU has woken up from and the first
deep stop state before calling pnv_wakeup_tb_loss().
Thus if the CPU woke up from a state that is deeper than the first
deep stop state, cr4 will have "gt" set and hence, pnv_wakeup_tb_loss()
will fail to restore the SPRs on waking up from such a state.
Fix the code in pnv_wakeup_tb_loss() to restore the SPR states when cr4
is "eq" or "gt".
Fixes: bcef83a00d ("powerpc/powernv: Add platform support for stop instruction")
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Reviewed-by: Shreyas B. Prabhu <shreyasbp@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* A multiplication for the size determination of a memory allocation
indicated that an array data structure should be processed.
Thus use the corresponding function "kmalloc_array".
* Replace the specification of a data structure by a pointer dereference
to make the corresponding size determination a bit safer according to
the Linux coding style convention.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
* A multiplication for the size determination of a memory allocation
indicated that an array data structure should be processed.
Thus use the corresponding function "kcalloc".
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
This issue was detected also by using the Coccinelle software.
* Replace the specification of data structures by pointer dereferences
to make the corresponding size determination a bit safer according to
the Linux coding style convention.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
