Add a "type" device attribute and a "GNSS_TYPE" uevent variable which
can be used to determine the type of a GNSS receiver. The currently
identified types reflect the protocol(s) supported by a receiver:
"NMEA" NMEA 0183
"SiRF" SiRF Binary
"UBX" UBX
Note that both SiRF and UBX type receivers typically support a subset of
NMEA 0183 with vendor extensions (e.g. to allow switching to the vendor
protocol).
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add binding for SiRFstar-based GNSS receivers.
Note that while four compatible-strings are initially added representing
devices which differ in which I/O interfaces they support, they
otherwise essentially share the same feature set.
Pin and supply names vary slightly, as do some recommended timings.
Note that the wakeup gpio is not intended to be used as a wakeup source,
but rather to detect the current power state of the device (active or
hibernate).
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add binding for u-blox GNSS receivers.
Note that the u-blox product names encodes form factor (e.g. "neo"),
chipset (e.g. "8") and variant (e.g. "q"), but that only formfactor and
chipset is used for the compatible strings (for now).
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
TCPCI stands for typec port controller interface, its implementation
has full typec port control with power delivery support, it's a
standard i2c slave with GPIO input as irq interface, detail see spec
"Universal Serial Bus Type-C Port Controller Interface Specification
Revision 1.0, Version 1.1"
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add bindings supported by current typec driver, so user can pass
all those properties via dt.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Recently binding of the Memory Controller has been extended, exposing
the Memory Client reset controls and hence it is now a reset controller.
Tegra video-decoder device is among the Memory Controller reset users,
document the new optional VDE HW reset property.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
All the sub-blocks of Allwinner A64 DE2 needs the SRAM C on A64 SoC to
be claimed, otherwise the whole DE2 space is inaccessible.
Add a device tree binding of the DE2 part as a sub-bus.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
The Allwinner A64 SoC has a DE2 CCU like the one in the DE2 of Allwinner
H5 SoC.
Add a compatible string for it.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Pull input updates from Dmitry Torokhov:
- the main change is a fix for my brain-dead patch to PS/2 button
reporting for some protocols that made it in 4.17
- there is a new driver for Spreadtum vibrator that I intended to send
during merge window but ended up not sending the 2nd pull request.
Given that this is a brand new driver we should not see regressions
here
- a fixup to Elantech PS/2 driver to avoid decoding errors on Thinkpad
P52
- addition of few more ACPI IDs for Silead and Elan drivers
- RMI4 is switched to using IRQ domain code instead of rolling its own
implementation
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: psmouse - fix button reporting for basic protocols
Input: xpad - fix GPD Win 2 controller name
Input: elan_i2c_smbus - fix more potential stack buffer overflows
Input: elan_i2c - add ELAN0618 (Lenovo v330 15IKB) ACPI ID
Input: elantech - fix V4 report decoding for module with middle key
Input: elantech - enable middle button of touchpads on ThinkPad P52
Input: do not assign new tracking ID when changing tool type
Input: make input_report_slot_state() return boolean
Input: synaptics-rmi4 - fix axis-swap behavior
Input: synaptics-rmi4 - fix the error return code in rmi_probe_interrupts()
Input: synaptics-rmi4 - convert irq distribution to irq_domain
Input: silead - add MSSL0002 ACPI HID
Input: goldfish_events - fix checkpatch warnings
Input: add Spreadtrum vibrator driver
Add the tas5707 to the available compatibles of the tas571x driver
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The dio2125 is simple enough that we can make it a generic component.
Rename the the dio2125 documentation to simple-amplifier to
prepare this change.
Suggested-by: Nicolò Veronese <nicveronese@gmail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Document the recently introduced hwp_dynamic_boost sysfs knob
allowing user space to tell intel_pstate to use iowait boosting
in the active mode with HWP enabled (to improve performance).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Fix an incorrect sysfs path in the intel_pstate admin-guide
documentation.
Fixes: 33fc30b470 (cpufreq: intel_pstate: Document the current behavior and user interface)
Reported-by: Pawit Pornkitprasan <p.pawit@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
We would not be matching the following chip/compatible strings
combinations, which would lead to not setting the warm boot flag
correctly, fix that:
7260A0/B0: brcm,brcmstb-memc-ddr-rev-b.2.1
7255A0: brcm,brcmstb-memc-ddr-rev-b.2.3
7278Bx: brcm,brcmstb-memc-ddr-rev-b.3.1
The B2.1 core (which is in 7260 A0 and B0) doesn't have the
SHIMPHY_ADDR_CNTL_0_DDR_PAD_CNTRL setup in the memsys init code, nor
does it have the warm boot flag re-definition on entry. Those changes
were for B2.2 and later MEMSYS cores. Fall back to the previous S2/S3
entry method for these specific chips.
Fixes: 0b741b8234 ("soc: bcm: brcmstb: Add support for S2/S3/S5 suspend states (ARM)")
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Update the Device Tree binding document and add a matching entry for the
MEMC DDR controller revision B3.0 which is found on chips like 7278A0
and newer.
Signed-off-by: Doug Berger <opendmb@gmail.com>
[florian: tweak commit message, make it apply to upstream kernel]
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
In an early version of the I2C patch that was posted to the list the
default I2C frequency (if none was specified) was 400 kHz. There was
debate on the list and we decided that it would be more consistent
with the rest of i2c if we defaulted to 100 kHz. ...but we never
updated the bindings. Let's fix this.
NOTE: since the i2c driver itself hasn't actually landed yet and the
SoC here is very new it seems terribly unlikely that anyone was
relying on the old 400 kHz number, so I'll assume this is an OK
"incompatible" device tree change.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Remove unneeded unit address from onewire node, so that dtc does not
complain that unit address is present without a corresponding reg entry,
when such use is made on a real dts file.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Trivial fix to spelling mistake in tilcdc.txt devicetree documentation.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>
More comprehensive list of model strings for ALC882 & co.
Also corrected the subsection in models.rst, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Like the previous commit for ALC662, let's give more comprehensive
list of model entries for ALC269 & co as well.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALC662 and others have far more fixup entries than the model table.
Let's add more model string entries so that user can test / debug
without compiling kernels at each time.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now that the documentation/script file got restored, fix the
references within the Kernel tree.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The modules for the cards described here changed their names.
Update accordingly.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The script is old and produce some warnings and errors, because
it lacks including stdlib.h and io.h is at sys/io.h.
Fix it to run with the tools found on modern Linux distros.
Tested building it on Fedora 28.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This script is mentioned at multisound Kconfig and files. As the
driver still exists, it probably makes sense to restore it.
Fixes: 727dede0ba ("sound: Retire OSS")
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is the complete translation of 'doc-guide' in Italian.
Please note that code comments will stay in English because
thats the language that everyone should use to write comments.
External files (svg, dot) are taken from Documentation/doc-guide
instead of copying them into the Italian translation.
Signed-off-by: Federico Vaga <federico.vaga@vaga.pv.it>
Signed-off-by: Alessia Mantegazza <amantegazza@vaga.pv.it>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The idea is to make it easier to create references (doc-guide does the same).
This will be used, for example but not only, in translations to point to
the main document.
Signed-off-by: Federico Vaga <federico.vaga@vaga.pv.it>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
In translations/ we have now a dedicated index.rst where we add/remove
references to translations. Translations are in English alphabetical
order.
Signed-off-by: Federico Vaga <federico.vaga@vaga.pv.it>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The description speaks about the option ``--man`` but it
does not exist. Instead, there is the option ``--usage``
$ ./Documentation/sphinx/parse-headers.pl --man
Unknown option: man
Usage:
parse_headers.pl [<options>] <C_FILE> <OUT_FILE> [<EXCEPTIONS_FILE>]
Where <options> can be: --debug, --help or --man.
Signed-off-by: Federico Vaga <federico.vaga@vaga.pv.it>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Fix a typo in sphinx.rst and a minor error in parse-header.rst
Signed-off-by: Federico Vaga <federico.vaga@vaga.pv.it>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
commit 1efff914af ("fs: add
dirtytime_expire_seconds sysctl") introduced dirtytime_expire_seconds
knob, but there is not description about it in
Documentation/sysctl/vm.txt.
Add the description for it.
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Fix reST error in Documentation/process/:
Documentation/process/2.Process.rst:131: ERROR: Malformed table.
Bottom/header table border does not match top border.
Fixes: 8962e40c19 ("docs: update kernel versions and dates in tables")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Tim Bird <tbird20d@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
