Allwinner H5 has a Mali-450 MP4 GPU, which has a reset line like other
Allwinner SoCs with Mali Utgard, but it's a Mali-450, so it needs a new
compatible.
Add the new compatible to Mali Utgard binding document.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Rob Herring <robh@kernel.org>
RK3399's GPU uses the quad-core Mali-T860, which is the new generation of
high-end graphics processors from ARM.
This patch added "rockchip,rk3399-mali" for dt-bindings, in order to
support IPA of gpu thermal in later.
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Update hts221 device binding with active-low interrupts support
(IRQ_TYPE_LEVEL_LOW and IRQ_TYPE_EDGE_FALLING).
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Pull tty/serial fixes from Greg KH:
"Here are some small tty and serial driver fixes for 4.13-rc2. Nothing
huge at all, a revert of a patch that turned out to break things, a
fix up for a new tty ioctl we added in 4.13-rc1 to get the uapi
definition correct, and a few minor serial driver fixes for reported
issues.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: Fix TIOCGPTPEER ioctl definition
tty: hide unused pty_get_peer function
tty: serial: lpuart: Fix the logic for detecting the 32-bit type UART
serial: imx: Prevent TX buffer PIO write when a DMA has been started
Revert "serial: imx-serial - move DMA buffer configuration to DT"
serial: sh-sci: Uninitialized variables in sysfs files
serial: st-asc: Potential error pointer dereference
Pull char/misc driver fixes from Greg KH:
"Here are some small char and misc driver fixes for 4.13-rc2. All fix
reported problems with 4.13-rc1 or older kernels (like the binder
fixes). Full details in the shortlog.
All have been in linux-next with no reported issues"
* tag 'char-misc-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
w1: omap-hdq: fix error return code in omap_hdq_probe()
regmap: regmap-w1: Fix build troubles
w1: Fix slave count on 1-Wire bus (resend)
mux: mux-core: unregister mux_class in mux_exit()
mux: remove the Kconfig question for the subsystem
nvmem: rockchip-efuse: amend compatible rk322x-efuse to rk3228-efuse
drivers/fsi: fix fsi_slave_mode prototype
fsi: core: register with postcore_initcall
thunderbolt: Correct access permissions for active NVM contents
vmbus: re-enable channel tasklet
spmi: pmic-arb: Always allocate ppid_to_apid table
MAINTAINERS: Add entry for SPMI subsystem
spmi: Include OF based modalias in device uevent
binder: Use wake up hint for synchronous transactions.
binder: use group leader instead of open thread
Revert "android: binder: Sanity check at binder ioctl"
Update binding document with adding operating-points-v2 as the required
property and the cooling level as the optional properties and adding more
examples guiding people how to use MediaTek cpufreq driver for MediaTek
SoCs.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The old place is Documentation/devicetree/bindings/clock/ that would
let people hard to find how to use MediaTek cpufreq driver, so moving
it to the appropriate place as other cpufreq drivers done would be
better.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 7cc119f29b ("dt-bindings: Add TI SCI PM Domains") introduced a
number of K2G_DEV_x macros to represent each device ID available on the
K2G platform for use by the genpd, clock, and reset drivers. Rather than
use these macros, which are only used in the device tree for property
values and not actually used by the drivers, let's just use the device
ID number directly in the device tree to avoid macro bloat.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Pull networking fixes from David Miller:
1) BPF verifier signed/unsigned value tracking fix, from Daniel
Borkmann, Edward Cree, and Josef Bacik.
2) Fix memory allocation length when setting up calls to
->ndo_set_mac_address, from Cong Wang.
3) Add a new cxgb4 device ID, from Ganesh Goudar.
4) Fix FIB refcount handling, we have to set it's initial value before
the configure callback (which can bump it). From David Ahern.
5) Fix double-free in qcom/emac driver, from Timur Tabi.
6) A bunch of gcc-7 string format overflow warning fixes from Arnd
Bergmann.
7) Fix link level headroom tests in ip_do_fragment(), from Vasily
Averin.
8) Fix chunk walking in SCTP when iterating over error and parameter
headers. From Alexander Potapenko.
9) TCP BBR congestion control fixes from Neal Cardwell.
10) Fix SKB fragment handling in bcmgenet driver, from Doug Berger.
11) BPF_CGROUP_RUN_PROG_SOCK_OPS needs to check for null __sk, from Cong
Wang.
12) xmit_recursion in ppp driver needs to be per-device not per-cpu,
from Gao Feng.
13) Cannot release skb->dst in UDP if IP options processing needs it.
From Paolo Abeni.
14) Some netdev ioctl ifr_name[] NULL termination fixes. From Alexander
Levin and myself.
15) Revert some rtnetlink notification changes that are causing
regressions, from David Ahern.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (83 commits)
net: bonding: Fix transmit load balancing in balance-alb mode
rds: Make sure updates to cp_send_gen can be observed
net: ethernet: ti: cpsw: Push the request_irq function to the end of probe
ipv4: initialize fib_trie prior to register_netdev_notifier call.
rtnetlink: allocate more memory for dev_set_mac_address()
net: dsa: b53: Add missing ARL entries for BCM53125
bpf: more tests for mixed signed and unsigned bounds checks
bpf: add test for mixed signed and unsigned bounds checks
bpf: fix up test cases with mixed signed/unsigned bounds
bpf: allow to specify log level and reduce it for test_verifier
bpf: fix mixed signed/unsigned derived min/max value bounds
ipv6: avoid overflow of offset in ip6_find_1stfragopt
net: tehuti: don't process data if it has not been copied from userspace
Revert "rtnetlink: Do not generate notifications for CHANGEADDR event"
net: dsa: mv88e6xxx: Enable CMODE config support for 6390X
dt-binding: ptp: Add SoC compatibility strings for dte ptp clock
NET: dwmac: Make dwmac reset unconditional
net: Zero terminate ifr_name in dev_ifname().
wireless: wext: terminate ifr name coming from userspace
netfilter: fix netfilter_net_init() return
...
Add binding documentation for the power domains
found on Rockchip RK3366 SoCs.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Since there's no user for the property reset inside the ethernet node
for current supported MediaTek SoCs and boards, so it should be safe to
update reset property in the bindings to introduce more reset signals as
corresponding that commit 7c2adaf110 ("reset: mediatek: Add MT2701 ethsys
reset controller include file") did in order to be referenced them from
within a devicetree file.
Cc: John Crispin <john@phrozen.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add SoC specific compatibility strings to the Broadcom DTE
based PTP clock binding document.
Fixed the document heading and node name.
Fixes: 80d6076140 ("dt-binding: ptp: add bindings document for dte based ptp clock")
Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the vast majority of cases the bus type is known to the driver(s)
since a receiver or transmitter can only support a single one. There
are cases however where different options are possible, or the bus type
cannot be automatically detected.
The existing V4L2 OF support tries to figure out the bus type and
parse the bus parameters based on that. This does not scale too well
as there are multiple serial busses that share common properties.
Some hardware also supports multiple types of busses on the same
interfaces.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The "Continuous Voltage" example specifies a pwm-dutycycle-range.
However, an equal sign is missing between the property name and value.
Fix this to allow copy and paste from the documentation when writing an
own .dts file with a pwm-regulator.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The explanation for the endpoint ID numbering scheme is convoluted
and hard to understand.
This patch aims to improve the readability of it by combining the
existing two paragraphs, while also providing a diagram example,
and how endpoints should be numbered based on that example.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
RT274 is a HD-A/SOC dual mode codec. This is the initial codec driver
of SOC mode.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add ECDH support for ATECC508A (I2C) device.
The device features hardware acceleration for the NIST standard
P256 prime curve and supports the complete key life cycle from
private key generation to ECDH key agreement.
Random private key generation is supported internally within
the device to ensure that the private key can never be known
outside of the device. If the user wants to use its own private
keys, the driver will fallback to the ecdh software implementation.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The dma-mask property is broken and was removed in the device trees
having a safexcel-eip197 node and in the safexcel cryptographic
driver. This patch removes the dma-mask property from the documentation
as well.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There are Device Tree source files defining a device node for the
tps61050/61052 I2C chip but there isn't a binding document for it.
Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The example contains a device node for a retu device, but
its compatible string doesn't have a vendor prefix.
While being there, drop the -mfd suffix since isn't correct.
Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
There are Device Tree source files defining a device node for the
retu/tahvo I2C chip, but there isn't a DT binding document for it.
Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
AXS10X boards manages it's clocks using various PLLs. These PLL has same
dividers and corresponding control registers mapped to different addresses.
So we add one common driver for such PLLs.
Each PLL on AXS10X board consist of three dividers: IDIV, FBDIV and
ODIV. Output clock value is managed using these dividers.
We add pre-defined tables with supported rate values and appropriate
configurations of IDIV, FBDIV and ODIV for each value.
As of today we add support for PLLs that generate clock for the
following devices:
* ARC core on AXC CPU tiles.
* ARC PGU on ARC SDP Mainboard.
and more to come later.
By this patch we add support for two plls (arc core pll and pgu pll),
so we had to use two different init types: CLK_OF_DECLARE for arc core pll and
regular probing for pgu pll.
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
[sboyd@codeaurora.org: Silence dubious !x & y sparse warning,
make of_axs10x_pll_clk_setup() unregister clk on failure]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The driver looks for "vib-overdrive-mv" property, while in
documentation we have "vib-overdriver-mv". Fix the doc.
Cc: Francesco Diotalevi <francesco.diotalevi@iit.it>
Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
The clock consumer usage description was erroneously referring to
couple of dt-binding headers that are no longer valid. The definition
and/or usage of these headers is incorrect and the only file present
at the moment, dt-bindings/soc/k2g.h is also being cleaned up. The
examples in this binding were updated properly, but the update to
description was missed out. So, fix this.
Fixes: 8f306cfe43 ("Documentation: dt: Add TI SCI clock driver")
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Rob Herring <robh@kernel.org>
This updates dt-binding documentation for MediaTek MT7622 and
MT7623 SoC. For the both SoCs supported all rely on the fallback
binding of the generic case with "mediatek,efuse".
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Andrew-CT Chen <andrew-ct.chen@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
checkpatch.pl doesn't know how to expand "silabs,si5351{a,a-msop,b,c}"
and so generates warnings about si5351-compatible devices appearing to
be un-documented. Resolve this by documenting the compatible options
supported by the clk-si5351 driver individually.
Signed-off-by: Brandon Streiff <brandon.streiff@ni.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Keep supporting proprietary "xlnx,phy-type" attribute and add support for
MII connectivity to the PHY.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Alvaro Gamez Machado <alvaro.gamez@hazent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the ability to configure the MFP1->MFP5 registers
as GPIOs. In addition adding ALSA controls to get and set
the GPIO state.
Per the data sheet each MFP can be configured as a GPIO
input only, output only or either an input or output.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
As the comments from Heiko Stuebner <heiko@sntech.de> that compatible
should not contain any placeholders, this patch fix it for rk3228 SoC.
Note that this is a fix for v4.13, due to fixing the current non-standard
binding name that should not become part of an official kernel release.
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for MSIOF in r8a7795 (R-Car H3).
Due to a hardware erratum on R-Car H3 ES1.x, this is only supported on
ES2.0 and later.
No driver update is needed.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
ECSPI contorller for iMX53 and iMX6 has few hardware issues
comparing to iMX51.
The change add possibility to detect which controller is used
to apply possible workaround and limitations.
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
