At Rob's request, we're starting to migrate our DT binding
documentation to json-schema YAML format. Start by converting our cpu
binding documentation. While doing so, document more properties and
nodes. This includes adding binding documentation support for the E51
and U54 CPU cores ("harts") that are present on this SoC. These cores
are described in:
https://static.dev.sifive.com/FU540-C000-v1.0.pdf
This cpus.yaml file is intended to be a starting point and to
evolve over time. It passes dt-doc-validate as of the yaml-bindings
commit 4c79d42e9216.
This patch was originally based on the ARM json-schema binding
documentation as added by commit 672951cbd1 ("dt-bindings: arm: Convert
cpu binding to json-schema").
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Pick up rc3 and rc4 and the merges from the other branches,
we're a bit out of date.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
The reg property represents the address and size on the bus that a
device lives, but for APR the parent is a rpmsg bus, which does not have
numerical addresses. Simply defining #address/#size-cells to 1 and 0,
respectively, to silence the compiler is not an appropriate solution.
Replace the use of "reg" with an APR specific property.
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The KSZ9477 series chips have a SYNCLKO pin which by default outputs a
25MHz clock, but some board setups require a 125MHz clock instead. Added
a microchip,synclko-125 device tree property to allow indicating a
125MHz clock output is required.
Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
ASoC: tohdmitx bindings
The patch on this branch adds bindings for tohdmitx, including a header
to be used in DT bindings which needs to be shared with the arm-soc tree
in order to allow system DTs to be merged.
# gpg: Signature made Fri 14 Jun 2019 11:43:33 AM PDT
# gpg: using RSA key ADE668AA675718B59FE29FEA24D68B725D5487D0
# gpg: issuer "broonie@kernel.org"
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>" [full]
# gpg: aka "Mark Brown <broonie@debian.org>" [full]
# gpg: aka "Mark Brown <broonie@kernel.org>" [full]
# gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>" [full]
# gpg: aka "Mark Brown <broonie@linaro.org>" [unknown]
# gpg: aka "Mark Brown <Mark.Brown@linaro.org>" [unknown]
* tag 'asoc-tohdmitx' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound:
ASoC: meson: add tohdmitx DT bindings
Reformatted compatibility strings to one valid combination on
each line.
Add FU540-C000 specific device tree bindings to already available
i2-ocores file. This device is available on
HiFive Unleashed Rev A00 board. Move interrupt under optional
property list as this can be optional.
The FU540-C000 SoC from sifive, has an Opencore's I2C block
reimplementation.
The DT compatibility string for this IP is present in HDL and available at.
https://github.com/sifive/sifive-blocks/blob/master/src/main/scala/devices/i2c/I2C.scala#L73
Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
STM32 serial can be reset via reset controller.
Add an optional reset property to stm32 usart bindings.
Signed-off-by: Erwan Le Ray <erwan.leray@st.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Add devicetree support for Khadas Edge/Edge-V/Captain boards.
Khadas Edge is an expandable Rockchip RK3399 board with goldfinger.
Khadas Captain is the carrier board for Khadas Edge.
Khadas Edge-V is a Khadas VIM form factor Rockchip RK3399 board.
Signed-off-by: Nick Xie <nick@khadas.com>
[edge-captain and edge-v contain different components that are supposed
to get added in future patches, so should stay separate while looking
somewhat similar right now]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
drm-misc-next for v5.3:
UAPI Changes:
Cross-subsystem Changes:
- Add code to signal all dma-fences when freed with pending signals.
- Annotate reservation object access in CONFIG_DEBUG_MUTEXES
Core Changes:
- Assorted documentation fixes.
- Use irqsave/restore spinlock to add crc entry.
- Move code around to drm_client, for internal modeset clients.
- Make drm_crtc.h and drm_debugfs.h self-contained.
- Remove drm_fb_helper_connector.
- Add bootsplash to todo.
- Fix lock ordering in pan_display_legacy.
- Support pinning buffers to current location in gem-vram.
- Remove the now unused locking functions from gem-vram.
- Remove the now unused kmap-object argument from vram helpers.
- Stop checking return value of debugfs_create.
- Add atomic encoder enable/disable helpers.
- pass drm_atomic_state to atomic connector check.
- Add atomic support for bridge enable/disable.
- Add self refresh helpers to core.
Driver Changes:
- Add extra delay to make MTP SDM845 work.
- Small fixes to virtio, vkms, sii902x, sii9234, ast, mcde, analogix, rockchip.
- Add zpos and ?BGR8888 support to meson.
- More removals of drm_os_linux and drmP headers for amd, radeon, sti, r128, r128, savage, sis.
- Allow synopsis to unwedge the i2c hdmi bus.
- Add orientation quirks for GPD panels.
- Edid cleanups and fixing handling for edid < 1.2.
- Add runtime pm to stm.
- Handle s/r in dw-hdmi.
- Add hooks for power on/off to dsi for stm.
- Remove virtio dirty tracking code, done in drm core.
- Rework BO handling in ast and mgag200.
Tiny conflict in drivers/gpu/drm/amd/display/dc/clk_mgr/clk_mgr.c,
needed #include <linux/slab.h> to make it compile.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0e01de30-9797-853c-732f-4a5bd6e61445@linux.intel.com
The "enable-method" property for cpu nodes needs to be "psci" for CPU
idle management to be setup correctly.
Add a note to the binding documentation to this effect to make it
obvious.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Make the naming of units consistent with common practices:
- Do not capitalize the first character of units ("Celsius" is
special, as it is not the unit name, but a reference to its
proposer),
- Do not use plural for units,
- Do not abbreviate "ampere",
- Concatenate prefixes and units (no spaces or hyphens),
- Separate units by spaces not hyphens,
- "milli" applies to "degree", not to "Celsius".
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
Currently, the binding examples are just built with dtc. dtc recently
gained the support necessary to output the examples in YAML format
(commit 87963ee20693 ("livetree: add missing type markers in generated
overlay properties"). Now just switch the output format and the examples
will be checked against the schema.
Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Generated nodes for overlays begin with '_'. The binding examples are
built as overlays in order to allow unresolved phandles, so we need to
allow the generated node names.
Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Add binding documentation for the imx8qxp DDR performance monitor unit.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
[will: Removed trailing newline]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Add bindings for Wiznet's w5x00 series of SPI interfaced Ethernet chips.
Based on the bindings for microchip,enc28j60.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
When McASP is bus master it's reference clock (AUXCLK) might not be a
static clock, but running at a specific FS ratio.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The Allwinner V3 SoC, despite come with the same die with V3s, has more
GPIO pins than V3s, and a different compatible string for pinctrl is
needed.
Add the compatible string for V3 pinctrl.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The pinctrl driver of V3s is already available and used in the kernel,
but the compatible string of it is forgotten to be added.
Add the missing compatible string.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
arm,scmi.txt used the wrong document identifier. "ARM DUI 0922B" is
the "ARM Compute Subsystem SCP, Message Interface Protocols". What we
need is the ARM DEN 0056A - "ARM System Control and Management
Interface Platform Design Document".
Fixes: fe7be8b297 ("dt-bindings: arm: add support for ARM System Control and Management Interface(SCMI) protocol")
Signed-off-by: Volodymyr Babchuk <volodymyr_babchuk@epam.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
These power supplies provide power for various PLLs that are set up and
driven by the XUSB pad controller. These power supplies were previously
improperly added to the PCIe and XUSB controllers, but depending on the
driver probe order, power to the PLLs will not be supplied soon enough
and cause initialization to fail.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Add binding for the QMP based side-channel communication mechanism to
the AOSS, which is used to control resources not exposed through the
RPMh interface.
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Merge immutable branch between LEDs, MFD and REGULATOR due to
TI LMU LED support rework and introduction of two new drivers
with DT bindings.
* tag 'ti-lmu-led-drivers':
leds: lm36274: Introduce the TI LM36274 LED driver
dt-bindings: leds: Add LED bindings for the LM36274
regulator: lm363x: Add support for LM36274
mfd: ti-lmu: Add LM36274 support to the ti-lmu
dt-bindings: mfd: Add lm36274 bindings to ti-lmu
leds: lm3697: Introduce the lm3697 driver
mfd: ti-lmu: Remove support for LM3697
dt-bindings: ti-lmu: Modify dt bindings for the LM3697
leds: TI LMU: Add common code for TI LMU devices
dt-bindings: mfd: LMU: Add ti,brightness-resolution
dt-bindings: mfd: LMU: Add the ramp up/down property
Add trigger type setting for csky,mpintc. The driver also could
support #interrupt-cells <1> and it wouldn't invalidate existing
DTs. Here we only show the complete format.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Reviewed-by: Rob Herring <robh+dt@kernel.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Update the documentation to support clock driver for the Amlogic G12B SoC.
G12B clock driver is very close, the main differences are :
- the clock tree is duplicated for the both clusters, and the
SYS_PLL are swapped between the clusters
- G12B has additional clocks like for CSI an other components
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Introduce some PHY DLL delays properties to help to sample the PHY clock.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
For some Spreadtrum platforms like SC9860 platform, we should enable another
gate clock '2x_enable' to make the SD host controller work well. Thus add
documentation for this optional clock.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
