ASPEED defconfig updates for 5.16
- Add options that are enabled in the common OpenBMC kernel
- Re-enable DRM_FBDEV_EMULATION
- Turn on the various sensor drivers that are used in BMC systems,
so we can boot test where they are modelled in Qemu
* tag 'aspeed-5.16-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
ARM: configs: aspeed: Remove unused USB gadget devices
ARM: config: aspeed: Enable Network Block Device
ARM: configs: aspeed: Enable pstore and lockup detectors
ARM: configs: aspeed: Enable commonly used drivers
ARM: configs: aspeed: Disable IPV6 SIT device
ARM: configs: aspeed_g5: Reneable DRM_FBDEV_EMULATION
Link: https://lore.kernel.org/r/CACPK8Xd0mVn2Cy7d=VBTDMpU=WHrftsiihwH224ekFSDGKAbyA@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
i.MX defconfig update for 5.16:
- A series from Marcel Ziswiler to update imx_v6_v7_defconfig for the
new Colibri iMX6ULL eMMC variant support.
- Enable HID I2C in the imx_v6_v7_defconfig as it is used for a HID
compliant wacom device on the reMarkable2 tablet.
* tag 'imx-defconfig-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: Enable HID I2C
ARM: imx_v6_v7_defconfig: enable bpf syscall and cgroup bpf
ARM: imx_v6_v7_defconfig: build imx sdma driver as module
ARM: imx_v6_v7_defconfig: rebuild default configuration
ARM: imx_v6_v7_defconfig: change snd soc tlv320aic3x to i2c variant
ARM: imx_v6_v7_defconfig: enable mtd physmap
Link: https://lore.kernel.org/r/20211016140138.1603-5-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull driver core fixes from Greg KH:
"Here are some small driver core fixes for 5.15-rc6, all of which have
been in linux-next for a while with no reported issues.
They include:
- kernfs negative dentry bugfix
- simple pm bus fixes to resolve reported issues"
* tag 'driver-core-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
drivers: bus: Delete CONFIG_SIMPLE_PM_BUS
drivers: bus: simple-pm-bus: Add support for probing simple bus only devices
driver core: Reject pointless SYNC_STATE_ONLY device links
kernfs: don't create a negative dentry if inactive node exists
The HID and mass storage gadget devices are used for the OpenBMC Web
UI's remote keyboard/mouse feature. The others are not required, so
disable them.
Signed-off-by: Joel Stanley <joel@jms.id.au>
No one is using this device on OpenBMC systems, and there is no code to
manage it in phosphor-networkd (the default OpenBMC userspace) as of
March 2021:
> [...] if you don't add IPv6 addresses to the sit interface
> it doesn't do anything. The defacto way to do that on an interface in
> OpenBMC is to have it managed by phosphor-networkd. On top of this, to
> support sit you would need a way to configure the local / remote IPv4
> addresses used to back it.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Enable HID I2C in the imx defconfig as it is used for a HID compliant
wacom device on the reMarkable2 tablet.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Run "make mvebu_v7_defconfig; make savedefconfig" to rebuild
mvebu_v7_defconfig
This re-ordered the following configuration options:
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_PCI=y
CONFIG_PCI_MVEBU=y
CONFIG_CRYPTO_DEV_MARVELL_CESA=y
And dropped the following nowadays obsolete configuration options:
CONFIG_ZBOOT_ROM_TEXT=0x0 (default now anyway since commit 39c3e30456
("ARM: 8984/1: Kconfig: set default ZBOOT_ROM_TEXT/BSS value to 0x0"))
CONFIG_ZBOOT_ROM_BSS=0x0 (ditto)
CONFIG_MTD_M25P80=y (got integrated into MTD_SPI_NOR)
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
i.MX fixes for 5.15:
- Revert cc8870bf4c to fix the regression on i.MX6 that suspend
support becomes broken.
- Add `qca,clk-out-frequency` property to fix Ethernet support on
imx6qdl-pico board.
- Re-enable FB support in imx_v6_v7_defconfig. It gets lost due to
f611b1e762 ("drm: Avoid circular dependencies for CONFIG_FB").
- Fix LP5562 LED support on imx6dl-yapp4 board.
- Add missing pinctrl-names for panel on M53Menlo board.
- Fix USB host power regulator polarity on M53Menlo board.
* tag 'imx-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: enable fb
ARM: dts: imx6qdl-pico: Fix Ethernet support
ARM: dts: imx: Fix USB host power regulator polarity on M53Menlo
ARM: dts: imx: Add missing pinctrl-names for panel on M53Menlo
Revert "ARM: imx6q: drop of_platform_default_populate() from init_machine"
ARM: dts: imx6dl-yapp4: Fix lp5562 LED driver probe
Link: https://lore.kernel.org/r/20210923063356.GK13480@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable CONFIG_BPF_SYSCALL and CONFIG_CGROUP_BPF to allow for systemd
interoperability. This avoids the following failure on boot:
[ 10.615914] systemd[1]: system-getty.slice: unit configures an IP
firewall, but the local system does not support BPF/cgroup firewalling.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Build CONFIG_IMX_SDMA as a module to avoid the following boot issue:
[ 5.214751] imx-sdma 20ec000.sdma: Direct firmware load for
imx/sdma/sdma-imx6q.bin failed with error -2
[ 5.215762] imx-sdma 20ec000.sdma: Falling back to sysfs fallback
for: imx/sdma/sdma-imx6q.bin
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Run "make imx_v6_v7_defconfig; make savedefconfig" to rebuild
imx_v6_v7_defconfig.
This dropped the following nowadays obsolete configuration options:
CONFIG_MTD_M25P80=y (got integrated into MTD_SPI_NOR)
CONFIG_CS89x0=y (selected by CS89x0_PLATFORM)
CONFIG_SMSC_PHY=y (selected by USB_NET_SMSC95XX)
CONFIG_GPIO_MC9S08DZ60=y (depends on MACH_MX35_3DS)
CONFIG_REGULATOR=y (selected by various stuff)
CONFIG_MEDIA_CAMERA_SUPPORT=y (defaults to on if MEDIA_CAMERA)
CONFIG_MEDIA_CONTROLLER=y (selected by various stuff)
CONFIG_VIDEO_V4L2_SUBDEV_API=y (selected by various stuff)
CONFIG_SND_SOC_PHYCORE_AC97=y
CONFIG_SND_SOC_IMX_MC13783=y
CONFIG_USB_EHCI_MXC=y
CONFIG_USB_FSL_USB2=y
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Change CONFIG_SND_SOC_TLV320AIC3X to CONFIG_SND_SOC_TLV320AIC3X_I2C.
I did double check all current mainline device trees and they are all
using the I2C rather than the SPI variant.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
These options have moved around when generating the defconfig. Update
them to reduce noise when generating future changes.
The exceptions are:
- NEW_LEDS and LEDS_TRIGGERS which should drop out as they are selected
by SND_CTL_LED. Instead we will improve the logic so SND_CTL_LED
doesn't force-enable the subsystem.
- The SPI_AX88796C network device. This was enabled in v5.11 for Exynos
boards. The driver is not yet merged but there's work being done, so
leave it alone for now.
- PTP_1588_CLOCK is implied by enabled drivers STMMAC_ETH, IGB, E1000E
and FEC, but this may be changed in the future as imply does not do
what it was originally intended to do.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210615011435.518115-7-joel@jms.id.au
These options were renamed in recent times. Add the new name so the
driver is built again, and drop the old name.
POWER_AVS was renamed POWER_AVS_OMAP in commit bca815d620 ("PM: AVS:
smartreflex Move driver to soc specific drivers"). Add the new symbol.
QCOM_PM became ARM_QCOM_SPM_CPUIDLE in commit a871be6b8e ("cpuidle: Convert
Qualcomm SPM driver to a generic CPUidle driver").
SND_MMP_SOC became CONFIG_SND_MMP_SOC_SSPA in commit a97e384ba7 ("ASoC:
mmp-sspa: Add Device Tree support"). Enable that instead.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210615011435.518115-4-joel@jms.id.au
A number of options in the defconfig are enabled by other options;
either through selects or defaults.
SECCOMP is on by default as of commit 282a181b1a ("seccomp: Move config
option SECCOMP to arch/Kconfig").
NET_SWITCHDEV is enabled by NET_DSA. I think this is a result of commit
227d72063f ("dsa: simplify Kconfig symbols and dependencies").
SIMPLE_PM_BUS is selected ARCH_OMAP2PLUS as of commit 2a39af3870 ("ARM:
OMAP2+: Fix booting for am335x after moving to simple-pm-bus").
MICREL_PHY is selected by the ks8851 ethernet driver as of f0791b92d2 ("net:
ks8851: Select PHYLIB and MICREL_PHY in Kconfig").
SMSC_PHY is selected by USB_NET_SMSC95XX as of commit 05b35e7eb9 ("smsc95xx:
add phylib support").
STMPE_I2C is default y. It was explicitly added to the defconfig in commit
d8f0ddc838 ("ARM: defconfig: add STMPE ADC driver for P4 Note") but it's not
required.
CLK_ACTIONS and CLK_OWL_S500 was explicitly added in commit 26ba4a474a ("ARM:
multi_v7_defconfig: Enable Actions Semi platform and drivers"), but it defaults
on when ARCH_ACTIONS is enabled. Drop them.
CROS_EC_CHARDEV defaults to MFD_CROS_EC_DEV, which defaults to CROS_EC since
commit 2fa2b980e3 ("mfd / platform: cros_ec: Rename config to a better name").
TEGRA20_APB_DMA is selected by SOC_TEGRA_FUSE if ARCH_TEGRA_2x_SOC since commit
19d41e5e9c ("soc/tegra: fuse: Add APB DMA dependency for Tegra20").
USB_CHIPIDEA_TEGRA is enabled when USB_CHIPIDEA is enabled. It falls out
of the defconfig but is enabled, as intended by d50229cee6 ("ARM:
multi_v7_defconfig: Stop using deprecated USB_EHCI_TEGRA").
SERIAL_OWL_CONSOLE defaults to on when SERIAL_OWL=y, and has since it
was introduced.
Commit c6774ee035 ("media: Kconfig: make filtering devices optional")
made MEDIA_PLATFORM_SUPPORT, MEDIA_CAMERA_SUPPORT and MEDIA_CEC_SUPPORT
default y if MEDIA_SUPPORT_FILTER is disabled, so they fall out of the
defconfig.
MEDIA_CONTROLLER is selected by a number of drivers in the config, and
additionally defaults to MEDIA_PLATFORM_SUPPORT which is enabled.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210615011435.518115-3-joel@jms.id.au
DRM_FBDEV_EMULATION previously selected FB and was default y as long as DRM
was enabled. In commit f611b1e762 ("drm: Avoid circular dependencies for
CONFIG_FB") the select was replaced with a depends on FB, disabling the
drivers that depended on it.
Renable FB so we get back FB_EFI, FB_WM8505, FB_SH_MOBILE_LCDC, FB_SIMPLE and
VIDEO_VIVID.
It must be set to y and not a module as the test driver VIDEO_VIVID
requires it to be built in.
Link: https://lore.kernel.org/r/CAK8P3a18EdBKQdGDOZc9cPKsf=hY8==v2cO0DBE_tyd82Uq-Ng@mail.gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Some drivers have not been built as they gained dependencies in kconfig but those
dependencies were not added to the defconfig.
The MSM pinctrl drivers fell out of the defconfig as of commit be117ca322
("pinctrl: qcom: Kconfig: Rework PINCTRL_MSM to be a depenency rather then a
selected config"). Add PINCTRL_MSM so these stay enabled.
EDAC depends on RAS, so enable it to ensure the EDAC drivers stay
enabled.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
DRM_FBDEV_EMULATION previously selected FB and was default y as long as DRM
was enabled. In commit f611b1e762 ("drm: Avoid circular dependencies for
CONFIG_FB") the select was replaced with a depends on FB, disabling
DRM_FBDEV_EMULATION for configurations that had it enabled.
Fixes: f611b1e762 ("drm: Avoid circular dependencies for CONFIG_FB")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Merge more updates from Andrew Morton:
"147 patches, based on 7d2a07b769.
Subsystems affected by this patch series: mm (memory-hotplug, rmap,
ioremap, highmem, cleanups, secretmem, kfence, damon, and vmscan),
alpha, percpu, procfs, misc, core-kernel, MAINTAINERS, lib,
checkpatch, epoll, init, nilfs2, coredump, fork, pids, criu, kconfig,
selftests, ipc, and scripts"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (94 commits)
scripts: check_extable: fix typo in user error message
mm/workingset: correct kernel-doc notations
ipc: replace costly bailout check in sysvipc_find_ipc()
selftests/memfd: remove unused variable
Kconfig.debug: drop selecting non-existing HARDLOCKUP_DETECTOR_ARCH
configs: remove the obsolete CONFIG_INPUT_POLLDEV
prctl: allow to setup brk for et_dyn executables
pid: cleanup the stale comment mentioning pidmap_init().
kernel/fork.c: unexport get_{mm,task}_exe_file
coredump: fix memleak in dump_vma_snapshot()
fs/coredump.c: log if a core dump is aborted due to changed file permissions
nilfs2: use refcount_dec_and_lock() to fix potential UAF
nilfs2: fix memory leak in nilfs_sysfs_delete_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_create_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_delete_##name##_group
nilfs2: fix memory leak in nilfs_sysfs_create_##name##_group
nilfs2: fix NULL pointer in nilfs_##name##_attr_release
nilfs2: fix memory leak in nilfs_sysfs_create_device_group
trap: cleanup trap_init()
init: move usermodehelper_enable() to populate_rootfs()
...
Pull ARM SoC updates from Arnd Bergmann:
"There are three noteworthy updates for 32-bit arm platforms this time:
- The Microchip SAMA7 family based on Cortex-A7 gets introduced, a
new cousin to the older SAM9 (ARM9xx based) and SAMA5 (Cortex-A5
based) SoCs.
- The ixp4xx platform (based on Intel XScale) is finally converted to
device tree, and all the old board files are getting removed now.
- The Cirrus Logic EP93xx platform loses support for the old
MaverickCrunch FPU. Support for compiling user space applications
was already removed in gcc-4.9, and the kernel support for old
applications could not be built with clang ias. After confirming
that there are no remaining users, removing this from the kernel
seemed better than adding support for unused features to clang.
There are minor updates to the aspeed, omap and samsung platforms"
* tag 'soc-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits)
soc: aspeed-lpc-ctrl: Fix clock cleanup in error path
ARM: s3c: delete unneed local variable "delay"
soc: aspeed: Re-enable FWH2AHB on AST2600
soc: aspeed: socinfo: Add AST2625 variant
soc: aspeed: p2a-ctrl: Fix boundary check for mmap
soc: aspeed: lpc-ctrl: Fix boundary check for mmap
ARM: ixp4xx: Delete the Freecom FSG-3 boardfiles
ARM: ixp4xx: Delete GTWX5715 board files
ARM: ixp4xx: Delete Coyote and IXDPG425 boardfiles
ARM: ixp4xx: Delete Intel reference design boardfiles
ARM: ixp4xx: Delete Avila boardfiles
ARM: ixp4xx: Delete the Arcom Vulcan boardfiles
ARM: ixp4xx: Delete Gateway WG302v2 boardfiles
ARM: ixp4xx: Delete Omicron boardfiles
ARM: ixp4xx: Delete the D-Link DSM-G600 boardfiles
ARM: ixp4xx: Delete NAS100D boardfiles
ARM: ixp4xx: Delete NSLU2 boardfiles
arm: omap2: Drop the unused OMAP_PACKAGE_* KConfig entries
arm: omap2: Drop obsolete MACH_OMAP3_PANDORA entry
ARM: ep93xx: remove MaverickCrunch support
...
ASPEED defconfig updates for 5.15
- Enable new KCS SerIO driver
- Enable SGPIO and EDAC for AST2400 now they are supported there
- Switch to SLUB and enable SLAB_FREELIST_HARDENED
- Regenerate defconfigs atop v5.14-rc2
* tag 'aspeed-5.15-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
ARM: config: aspeed: Regenerate defconfigs
ARM: config: aspeed_g4: Enable EDAC and SPGIO
ARM: config: aspeed: Enable KCS adapter for raw SerIO
ARM: config: aspeed: Enable hardened allocator feature
Link: https://lore.kernel.org/r/CACPK8XdzKdnyrpjKukGWieBhLgQnBs+y=LuSr_weot=Ovy3+9A@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A make defconfig && make savedefconfig was performed for each
configuration.
Most changes are due to options moving around, except for the following
which are due to changing defaults:
- SECCOMP is enabled by default as of commit 282a181b1a ("seccomp:
Move config option SECCOMP to arch/Kconfig") in v5.9
- The soc drivers ASPEED_LPC_CTRL, ASPEED_LPC_SNOOP and ASPEED_P2A_CTRL
are enabled by default when the aspeed platform is enabled, as of
commit 592693a1f8 ("soc: aspeed: Improve kconfig") in v5.9
- The ZBOOT_ROM_TEXT/BSS values fall out of the defconfig as of
commit 39c3e30456 ("ARM: 8984/1: Kconfig: set default
ZBOOT_ROM_TEXT/BSS value to 0x0") in v5.8
- I2C_MUX is selected by MEDIA_SUBDRV_AUTOSELECT, probably as of about
v5.8. It was in the config as it is required bt the PCA I2C muxes
that enabled it
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20210819065203.2620911-5-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
SLAB_FREELIST_HARDENED can protect from freelist overwrite attacks with
really small overhead.
It works best with the SLUB allocator, so make SLUB the default by
removing SLAB=y.
total used free shared buff/cache available
SLAB 425596 44065.3+/-220 311099+/-3800 14864+/-3900 70432+/-3700 352767+/-3900
SLUB 425592 44225.3+/-280 313275+/-600 12132+/-3.3 68092+/-530 355295+/-280
These figures are the average memory usage from three boots of each
option in qemu, running the Romulus userspace. The output is from
free(1), reported in kilobytes.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20210819065203.2620911-2-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
i.MX defconfig update for 5.15:
- Enable LTC3676 PMIC, SCSI_LOWLEVEL and KPROBES support in
imx_v6_v7_defconfig.
* tag 'imx-defconfig-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: enable driver of the LTC3676 PMIC
ARM: imx_v6_v7_defconfig: Let CONFIG_SCSI_LOWLEVEL be selected
ARM: imx_v6_v7_defconfig: Select CONFIG_KPROBES
Link: https://lore.kernel.org/r/20210814133853.9981-4-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ARM: tegra: Default configuration changes for v5.15-rc1
Enables a couple of drivers by default so that the configuration is
useful on more devices. This also rebuilds the tegra_defconfig, which
hasn't been done in a long time.
* tag 'tegra-for-5.15-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: multi_v7_defconfig: Enable CONFIG_TEGRA30_TSENSOR
ARM: multi_v7_defconfig: Enable Acer A500 drivers
ARM: tegra: Rebuild default configuration
ARM: tegra: Enable CONFIG_CROS_EC
ARM: tegra: Enable Acer A500 drivers
ARM: tegra: Enable CONFIG_FB
ARM: tegra: Enable CONFIG_TEGRA30_TSENSOR
Link: https://lore.kernel.org/r/20210813162157.2820913-5-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Amlogic ARM configs change for v5.15:
- Enable CONFIG_MMC_MESON_MX_SDHC controller used on meson8/8b
* tag 'amlogic-arm-configs-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
ARM: multi_v7_defconfig: Enable CONFIG_MMC_MESON_MX_SDHC
Link: https://lore.kernel.org/r/8e2b5139-86e6-0da3-75c4-d8df66448d51@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
AT91 defconfig for 5.15:
- add defconfig entries for new SoC: SAMA7G5
- dedicated sama7_defconfig which avoids having to carry older drivers
and dependencies from the sama5 family:
CACHE_L2X0, CAN_AT91, TOUCHSCREEN_ADC, AT91SAM9X_WATCHDOG,
VIDEO_ATMEL_ISI, SND_ATMEL_SOC_I2S, MMC_ATMELMCI, AT_HDMAC, AT91_ADC,
REGULATOR_ACT*
Addition of new drivers that are not part of any sama5 SoC:
SND_MCHP_SOC_I2S_MCC, SND_MCHP_SOC_SPDIFTX|RX, MICROCHIP_PIT64B
plus upcoming MIPI pipeline, audio sample rate converter, ...
It also maintains both sama5 and sama7 defconfig tailored for their
respective families and easy to identify.
- addition to the generic multi_v7_defconfig
* tag 'at91-defconfig-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: multi_v7_defconfig: add sama7g5 SoC
ARM: configs: at91: add defconfig for sama7 family of SoCs
Link: https://lore.kernel.org/r/20210809134521.10155-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
