Since unique_id is only supported in PMFW 0x3A5300 and higher, we will
only be able to use it inside Smu_Metrics_V3_t, which requires PMFW
0x3A4900 and higher. Remove the unique_id/serial_number references from
the v1 and v2 tables to avoid any confusion, and return 0 if metrics_v1
or metrics_v2 are used to try to get the unique_id/serial_number.
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
FPU documentation states that developers must not use DC_FP_START/END
inside dml files, but use this macro to wrap calls to FPU functions in
dc folder (outside dml folder). Therefore, this patch removes DC_FP_*
wrappers from dml folder and wraps calls for these FPU operations
outside dml, as required.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dcn10_validate_bandwidth is only used on dcn10 files, but is declared in
dcn_calcs files. Rename dcn10_* to dcn_* in calcs, remove DC_FP_* wrapper
inside DML folder and create an specific dcn10_validate_bandwidth in
dcn10_resources that calls dcn_validate_bandwidth and properly wraps that
FPU function with DC_FP_* macro.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is being added to SMU Metrics, so add the required tie-ins in the
kernel. Also create the corresponding unique_id sysfs file.
v2: Add FW version check, remove SMU mutex
v3: Fix style warning
v4: Add MP1 IP_VERSION check to FW version check
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To ease readability, use switch to set unique_id as supported for the
supported IP_VERSIONs, and set it to unsupported by default for all
other ASICs.
This makes it easier to add IP_VERSIONs later on, and makes it obvious
that it is not supported by default, instead of the current logic that
assumes that it is supported unless it is not one of the specified
IP_VERSIONs.
v2: Rebase onto previous IP_VERSION change
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Kevin Wang <KevinYang.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
comparing pwm bl values (coverted) with user brightness(converted)
levels in commit_tail leads to continuous setting of backlight via dmub
as they don't to match.
This leads overdrive in queuing of commands to DMCU that sometimes lead
to depending on load on DMCU fw:
"[drm:dc_dmub_srv_wait_idle] *ERROR* Error waiting for DMUB idle: status=3"
[How]
Store last successfully set backlight value and compare with it instead
of pwm reads which is not what we should compare with.
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The value actual_pix_clk_100Hz is dereferencing pointer pix_clk_params
before pix_clk_params is being null checked. Fix this by assigning
pix_clk_params->requested_pix_clk_100hz to actual_pix_clk_100Hz only if
pix_clk_params is not NULL, otherwise just NULL.
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Flush TLB needs wait for GPU update fence done. MMU notify callback to
unmap range from GPUs uses unlocked GPU page table update, so add tlb_cb
to unlocked update fence to increase vm->tlb_seq.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To fix two issues with unlocked update fence:
1. vm->last_unlocked store the latest fence without taking refcount.
2. amdgpu_vm_bo_update_mapping returns old fence, not the latest fence.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The pointer edid_buf is dereferencing pointer edid before edid is being
null checked. Fix this by assigning edid->raw_edid to edid_buf only if
edid is not NULL, otherwise just NULL.
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
On resume we do link detection for all non-MST connectors.
MST is handled separately. However the condition for telling
if connector is on mst branch is not enough for mst hub case.
Link detection for mst branch link leads to mst topology reset.
That causes assert in dc_link_allocate_mst_payload()
[How]
Use link type as indicator for mst link.
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- [FW Promotion] Release 0.0.110.0
- Revert FEC check in validation
- Update LTTPR UHBR link rate support struct
- Add support for USBC connector
- Add work around for AUX failure on wake
- Clear optc false state when disable otg
- Enable power gating before init_pipes
- Remove redundant dsc power gating from init_hw
- Power down hardware if timer not trigger
- Correct Slice reset calculation
- Enable 3-plane MPO for DCN31
- Set fec register init value
- Remove SW w/a for HDCP 1.4 1A-07 failure based on ECO fix
- Create underflow interrupt IRQ type
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When waking from low-power states, a DP sink may remain unresponsive to
AUX transactions.
[How]
Try to toggle DPCD SET_POWER register repeatedly (up to a maximum
timeout value) until DP sink becomes responsive.
Reviewed-by: Mustapha Ghaddar <Mustapha.Ghaddar@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In init_hw() we call init_pipes() before enabling power gating.
init_pipes() tries to power gate dsc but it may fail because
required force-ons are not released yet.
As a result with dsc config the following errors observed on resume:
"REG_WAIT timeout 1us * 1000 tries - dcn20_dsc_pg_control"
"REG_WAIT timeout 1us * 1000 tries - dcn20_dpp_pg_control"
"REG_WAIT timeout 1us * 1000 tries - dcn20_hubp_pg_control"
[How]
Move enable_power_gating_plane() before init_pipes() in init_hw()
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Eric Yang <Eric.Yang2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DSC Power down code has been moved from dcn31_init_hw into init_pipes()
Need to remove it from dcn10_init_hw() as well to avoid duplicated action
on dcn1.x/2.x
[How]
Remove DSC power down code from dcn10_init_hw()
Fixes: 8fa6f4c571 ("drm/amd/display: fixed the DSC power off sequence during Driver PnP")
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Eric Yang <Eric.Yang2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
In headless systems, if SetMode/Power down timer
is not called, hardware will not be powered down
causing HW/SW discrepancies. Powering down hardware
on SetPowerState to D3 will ensure SW/HW state is accurate.
[HOW]
If PowerDownThread timer is not trigger but OS call
SetPowerState to D3, power down hardware.
Reviewed-by: Eric Yang <Eric.Yang2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Once DSC slice cannot fit pixel clock, we incorrectly
reset min slices to 0 and allow max slice to operate,
even when max slice itself cannot fit the pixel clock
properly.
[How]
Change the sequence such that we correctly determine
DSC is not possible when both min slices and max
slices cannot fit pixel clock per slice.
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Chris Park <Chris.Park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit c206c7faeb.
In order to avoid any probe ordering issues, the I2C based downstream
bridge drivers now register and attach the DSI devices at the probe
instead of doing it on drm_bridge_function.attach().
Examples of those commits are:
commit <6ef7ee48765f> ("drm/bridge: sn65dsi83: Register and attach our
DSI device at probe")
commit <d89078c37b10> ("drm/bridge: lt8912b: Register and attach our DSI
device at probe")
commit <864c49a31d6b> ("drm/bridge: adv7511: Register and attach our DSI
device at probe")
dw-mipi-dsi has panel or bridge finding code based on previous downstream
bridges, so revert the same and make the panel or bridge funding in host
attach as before.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220331154503.66054-1-jagan@amarulasolutions.com
