The initial implementation of the GHCB spec was based on trying to keep
the register state offsets the same relative to the VM save area. However,
the save area for SEV-ES has changed within the hardware causing the
relation between the SEV-ES save area to change relative to the GHCB save
area.
This is the second step in defining the multiple save areas to keep them
separate and ensuring proper operation amongst the different types of
guests. Create a GHCB save area that matches the GHCB specification.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Link: https://lore.kernel.org/r/20220307213356.2797205-4-brijesh.singh@amd.com
The save area for SEV-ES/SEV-SNP guests, as used by the hardware, is
different from the save area of a non SEV-ES/SEV-SNP guest.
This is the first step in defining the multiple save areas to keep them
separate and ensuring proper operation amongst the different types of
guests. Create an SEV-ES/SEV-SNP save area and adjust usage to the new
save area definition where needed.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Link: https://lore.kernel.org/r/20220405182743.308853-1-brijesh.singh@amd.com
It appears that almost traditionally the N variants have deviations
in the register offsets in comparison to S one. This is the case
for Intel Alder Lake as well. Fix register offsets for ADL-N variant.
Fixes: 114b610b90 ("pinctrl: alderlake: Add Intel Alder Lake-N pin controller support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
It is possible to take a stage-2 permission fault on a page larger than
PAGE_SIZE. For example, when running a guest backed by 2M HugeTLB, KVM
eagerly maps at the largest possible block size. When dirty logging is
enabled on a memslot, KVM does *not* eagerly split these 2M stage-2
mappings and instead clears the write bit on the pte.
Since dirty logging is always performed at PAGE_SIZE granularity, KVM
lazily splits these 2M block mappings down to PAGE_SIZE in the stage-2
fault handler. This operation must be done under the write lock. Since
commit f783ef1c0e ("KVM: arm64: Add fast path to handle permission
relaxation during dirty logging"), the stage-2 fault handler
conditionally takes the read lock on permission faults with dirty
logging enabled. To that end, it is possible to split a 2M block mapping
while only holding the read lock.
The problem is demonstrated by running kvm_page_table_test with 2M
anonymous HugeTLB, which splats like so:
WARNING: CPU: 5 PID: 15276 at arch/arm64/kvm/hyp/pgtable.c:153 stage2_map_walk_leaf+0x124/0x158
[...]
Call trace:
stage2_map_walk_leaf+0x124/0x158
stage2_map_walker+0x5c/0xf0
__kvm_pgtable_walk+0x100/0x1d4
__kvm_pgtable_walk+0x140/0x1d4
__kvm_pgtable_walk+0x140/0x1d4
kvm_pgtable_walk+0xa0/0xf8
kvm_pgtable_stage2_map+0x15c/0x198
user_mem_abort+0x56c/0x838
kvm_handle_guest_abort+0x1fc/0x2a4
handle_exit+0xa4/0x120
kvm_arch_vcpu_ioctl_run+0x200/0x448
kvm_vcpu_ioctl+0x588/0x664
__arm64_sys_ioctl+0x9c/0xd4
invoke_syscall+0x4c/0x144
el0_svc_common+0xc4/0x190
do_el0_svc+0x30/0x8c
el0_svc+0x28/0xcc
el0t_64_sync_handler+0x84/0xe4
el0t_64_sync+0x1a4/0x1a8
Fix the issue by only acquiring the read lock if the guest faulted on a
PAGE_SIZE granule w/ dirty logging enabled. Add a WARN to catch locking
bugs in future changes.
Fixes: f783ef1c0e ("KVM: arm64: Add fast path to handle permission relaxation during dirty logging")
Cc: Jing Zhang <jingzhangos@google.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220401194652.950240-1-oupton@google.com
We already sanitize the guest's PSCI version when it is being written by
userspace, rejecting unsupported version numbers. Additionally, the
'minor' parameter to kvm_psci_1_x_call() is a constant known at compile
time for all callsites.
Though it is benign, the additional check against the
PSCI kvm_psci_1_x_call() is unnecessary and likely to be missed the next
time KVM raises its maximum PSCI version. Drop the check altogether and
rely on sanitization when the PSCI version is set by userspace.
No functional change intended.
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220322183538.2757758-4-oupton@google.com
The SMCCC does not allow the SMC64 calling convention to be used from
AArch32. While KVM checks to see if the calling convention is allowed in
PSCI_1_0_FN_PSCI_FEATURES, it does not actually prevent calls to
unadvertised PSCI v1.0+ functions.
Hoist the check to see if the requested function is allowed into
kvm_psci_call(), thereby preventing SMC64 calls from AArch32 for all
PSCI versions.
Fixes: d43583b890 ("KVM: arm64: Expose PSCI SYSTEM_RESET2 call to the guest")
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220322183538.2757758-3-oupton@google.com
The only valid calling SMC calling convention from an AArch32 state is
SMC32. Disallow any PSCI function that sets the SMC64 function ID bit
when called from AArch32 rather than comparing against known SMC64 PSCI
functions.
Note that without this change KVM advertises the SMC64 flavor of
SYSTEM_RESET2 to AArch32 guests.
Fixes: d43583b890 ("KVM: arm64: Expose PSCI SYSTEM_RESET2 call to the guest")
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220322183538.2757758-2-oupton@google.com
Sort the output of debugfs alloc_traces and free_traces by the frequency
of allocation/freeing stack traces. Most frequently used stack traces
will be printed first, e.g. for easier memory leak debugging.
Signed-off-by: Oliver Glitta <glittao@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-and-tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Acked-by: David Rientjes <rientjes@google.com>
Aggregate objects in slub cache by unique stack trace in addition to
caller address when producing contents of debugfs files alloc_traces and
free_traces in debugfs. Also add the stack traces to the debugfs output.
This makes it much more useful to e.g. debug memory leaks.
Signed-off-by: Oliver Glitta <glittao@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-and-tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Many stack traces are similar so there are many similar arrays.
Stackdepot saves each unique stack only once.
Replace field addrs in struct track with depot_stack_handle_t handle. Use
stackdepot to save stack trace.
The benefits are smaller memory overhead and possibility to aggregate
per-cache statistics in the following patch using the stackdepot handle
instead of matching stacks manually.
[ vbabka@suse.cz: rebase to 5.17-rc1 and adjust accordingly ]
This was initially merged as commit 788691464c and reverted by commit
ae14c63a9f due to several issues, that should now be fixed.
The problem of unconditional memory overhead by stackdepot has been
addressed by commit 2dba5eb1c7 ("lib/stackdepot: allow optional init
and stack_table allocation by kvmalloc()"), so the dependency on
stackdepot will result in extra memory usage only when a slab cache
tracking is actually enabled, and not for all CONFIG_SLUB_DEBUG builds.
The build failures on some architectures were also addressed, and the
reported issue with xfs/433 test did not reproduce on 5.17-rc1 with this
patch.
Signed-off-by: Oliver Glitta <glittao@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-and-tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
set_track() either zeroes out the struct track or fills it, depending on
the addr parameter. This is unnecessary as there's only one place that
calls it for the initialization - init_tracking(). We can simply do the
zeroing there, with a single memset() that covers both TRACK_ALLOC and
TRACK_FREE as they are adjacent.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-and-tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Acked-by: David Rientjes <rientjes@google.com>
In a later patch we want to add stackdepot support for object owner
tracking in slub caches, which is enabled by slub_debug boot parameter.
This creates a bootstrap problem as some caches are created early in
boot when slab_is_available() is false and thus stack_depot_init()
tries to use memblock. But, as reported by Hyeonggon Yoo [1] we are
already beyond memblock_free_all(). Ideally memblock allocation should
fail, yet it succeeds, but later the system crashes, which is a
separately handled issue.
To resolve this boostrap issue in a robust way, this patch adds another
way to request stack_depot_early_init(), which happens at a well-defined
point of time. In addition to build-time CONFIG_STACKDEPOT_ALWAYS_INIT,
code that's e.g. processing boot parameters (which happens early enough)
can call a new function stack_depot_want_early_init(), which sets a flag
that stack_depot_early_init() will check.
In this patch we also convert page_owner to this approach. While it
doesn't have the bootstrap issue as slub, it's also a functionality
enabled by a boot param and can thus request stack_depot_early_init()
with memblock allocation instead of later initialization with
kvmalloc().
As suggested by Mike, make stack_depot_early_init() only attempt
memblock allocation and stack_depot_init() only attempt kvmalloc().
Also change the latter to kvcalloc(). In both cases we can lose the
explicit array zeroing, which the allocations do already.
As suggested by Marco, provide empty implementations of the init
functions for !CONFIG_STACKDEPOT builds to simplify the callers.
[1] https://lore.kernel.org/all/YhnUcqyeMgCrWZbd@ip-172-31-19-208.ap-northeast-1.compute.internal/
Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Suggested-by: Mike Rapoport <rppt@linux.ibm.com>
Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-and-tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: David Rientjes <rientjes@google.com>
ath.git patches for v5.19. Major changes:
ath11k
* Wake-on-WLAN support for QCA6390 and WCN6855
* device recovery (firmware restart) support for QCA6390 and WCN6855
wcn36xx
* support for transmit rate reporting to user space
This activates display drivers that give console on the
different U8500 mobile phones, the GNSS subsystem and the
SIRF GNSS driver so we can manage the GPS chips, the regulator
LEDs as used in some phones and one more IIO light sensor driver.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
No need to have goto for a return statement, so simplify the code. While at it,
print warning messages if power up calls fail.
No functional changes.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220401173042.17467-4-kvalo@kernel.org
While reviewing the mhi.c I noticed we were just ignoring the errors coming
from MHI subsystem during suspend and resume. Add proper checks and warning
messages. Also pass the error value to callers.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220401173042.17467-3-kvalo@kernel.org
State machines are difficult to understand and in this case it's just useless,
which is shown by the diffstat. So remove it entirely to make the code simpler.
No functional changes.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220401173042.17467-2-kvalo@kernel.org
slub_kunit does not expect other debugging flags to be set when running
tests. When SLAB_RED_ZONE flag is set globally, test fails because the
flag affects number of errors reported.
To make slub_kunit unaffected by user specified debugging flags,
introduce SLAB_NO_USER_FLAGS to ignore them. With this flag, only flags
specified in the code are used and others are ignored.
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://lore.kernel.org/r/Yk0sY9yoJhFEXWOg@hyeyoo
Right now the only point where softpin mappings get removed from the
MMU context is when the mapped GEM object is destroyed. However,
userspace might want to reuse that address space before the object
is destroyed, which is a valid usage, as long as all mapping in that
region of the address space are no longer used by any GPU jobs.
Implement reaping of idle MMU mappings that would otherwise
prevent the insertion of a softpin mapping.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Guido Günther <agx@sigxcpu.org>
Acked-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
The flush sequence is a marker that the page tables have been changed
and any affected TLBs need to be flushed. Move the flush_seq increment
a little further down the call stack to place it next to the actual
page table manipulation. Not functional change.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Guido Günther <agx@sigxcpu.org>
Acked-by: Guido Günther <agx@sigxcpu.org>
This makes it a little more clear that the mapping holds a reference
to the context once the buffer has been successfully mapped into that
context and simplifies the error handling a bit.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Guido Günther <agx@sigxcpu.org>
Acked-by: Guido Günther <agx@sigxcpu.org>
The smatch reports:
rtw8852a.c:1857 rtw8852a_btc_set_wl_txpwr_ctrl() error: uninitialized symbol '_cur'.
rtw8852a.c:1858 rtw8852a_btc_set_wl_txpwr_ctrl() error: uninitialized symbol '_cur'.
This is because rtw89_mac_txpwr_read32() can possibly return before setting
argument _cur, and the caller will use the uninitialized value. To fix this
problem, check the return value of rtw89_mac_txpwr_read32().
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220318035202.42437-1-pkshih@realtek.com
The newer chip will generate security header itself, so don't set
IEEE80211_KEY_FLAG_GENERATE_IV in this kind of chip. But, it needs to fill
key_index, PN and 802.11 header length to TX descriptor, and then hardware
uses these to generate security header.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220318023214.32411-11-pkshih@realtek.com
