This patch fixes the following warning when doing a 32 bit kernel build
when pointers are 4 byte long:
In file included from ./include/linux/byteorder/little_endian.h:5,
from ./arch/x86/include/uapi/asm/byteorder.h:5,
from ./include/asm-generic/qrwlock_types.h:6,
from ./arch/x86/include/asm/spinlock_types.h:7,
from ./include/linux/spinlock_types_raw.h:7,
from ./include/linux/ratelimit_types.h:7,
from ./include/linux/printk.h:10,
from ./include/asm-generic/bug.h:22,
from ./arch/x86/include/asm/bug.h:87,
from ./include/linux/bug.h:5,
from ./include/linux/mmdebug.h:5,
from ./include/linux/gfp.h:5,
from ./include/linux/slab.h:15,
from fs/dlm/dlm_internal.h:19,
from fs/dlm/rcom.c:12:
fs/dlm/rcom.c: In function ‘dlm_send_rcom_lock’:
./include/uapi/linux/byteorder/little_endian.h:32:43: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
#define __cpu_to_le64(x) ((__force __le64)(__u64)(x))
^
./include/linux/byteorder/generic.h:86:21: note: in expansion of macro ‘__cpu_to_le64’
#define cpu_to_le64 __cpu_to_le64
^~~~~~~~~~~~~
fs/dlm/rcom.c:457:14: note: in expansion of macro ‘cpu_to_le64’
rc->rc_id = cpu_to_le64(r);
The rc_id value in dlm rcom is handled as u64. The rcom implementation
uses for an unique number generation the pointer value of the used
dlm_rsb instance. However if the pointer value is 4 bytes long
-Wpointer-to-int-cast will print a warning. We get rid of that warning
to cast the pointer to uintptr_t which is either 4 or 8 bytes. There
might be a very unlikely case where this number isn't unique anymore if
using dlm in a mixed cluster of nodes and sizeof(uintptr_t) returns 4 and
8.
However this problem was already been there and this patch should get
rid of the warning.
Fixes: 2f9dbeda8d ("dlm: use __le types for rcom messages")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Accessing the one in fbmem.c without taking the right locks is a bad
idea. Instead maintain our own private copy, which is fully protected
by console_lock() (like everything else in fbcon.c). That copy is
serialized through fbcon_fb_registered/unregistered() calls.
Also this means we do not need to hold a full fb_info reference, which
is nice because doing so would mean a refcount loop between the
console and the fb_info. But it's also not nice since it means
console_lock() must be held absolutely everywhere. Well strictly
speaking we could still try to do some refcounting games again by
calling get_fb_info before we drop the console_lock. But things will
get tricky.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Claudio Suarez <cssk@net-c.es>
Cc: Du Cheng <ducheng2@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405210335.3434130-18-daniel.vetter@ffwll.ch
There's a bunch of confusions going on here:
- The deferred fbcon setup notifier should only be cleaned up from
fb_console_exit(), to be symmetric with fb_console_init()
- We also need to make sure we don't race with the work, which means
temporarily dropping the console lock (or we can deadlock)
- That also means no point in clearing deferred_takeover, we are
unloading everything anyway.
- Finally rename fbcon_exit to fbcon_release_all and move it, since
that's what's it doing when being called from consw->con_deinit
through fbcon_deinit.
To answer a question from Sam just quoting my own reply:
> We loose the call to fbcon_release_all() here [in fb_console_exit()].
> We have part of the old fbcon_exit() above, but miss the release parts.
Ah yes that's the entire point of this change. The release_all in the
fbcon exit path was only needed when fbcon was a separate module
indepedent from core fb.ko. Which means it was possible to unload fbcon
while having fbdev drivers registered.
But since we've merged them that has become impossible, so by the time the
fb.ko module can be unloaded, there's guaranteed to be no fbdev drivers
left. And hence removing them is pointless.
v2: Explain the why better (Sam)
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Claudio Suarez <cssk@net-c.es>
Cc: Du Cheng <ducheng2@gmail.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405210335.3434130-17-daniel.vetter@ffwll.ch
No idea why con2fb_acquire_newinfo() initializes much less than
fbcon_startup(), but so be it. From a quick look most of the
un-initialized stuff should be fairly harmless, but who knows.
Note that the error handling for the con2fb_acquire_newinfo() failure
case was very strange: Callers updated con2fb_map to the new value
before calling this function, but upon error con2fb_acquire_newinfo
reset it to the old value. Since I removed the call to fbcon_release
anyway that strange error path was sticking out like a sore thumb,
hence I removed it. Which also allows us to remove the oldidx
parameter from that function.
v2: Explain what's going on with oldidx and error paths (Sam)
v3: Drop unused variable (0day)
v4: Rebased over bisect fix in previous patch, unchagend end result.
Acked-by: Sam Ravnborg <sam@ravnborg.org> (v2)
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: kernel test robot <lkp@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Claudio Suarez <cssk@net-c.es>
Cc: Du Cheng <ducheng2@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405210335.3434130-12-daniel.vetter@ffwll.ch
Allows us to delete a bunch of hand-rolled stuff using a timer plus a
separate work). Also to simplify the code we initialize the
cursor_work completely when we allocate the fbcon_ops structure,
instead of trying to cope with console re-initialization.
The motiviation here is that fbcon code stops using the fb_info.queue,
which helps with locking issues around cleanup and all that in a later
patch.
Also note that this allows us to ditch the hand-rolled work cleanup in
fbcon_exit - we already call fbcon_del_cursor_timer, which takes care
of everything. Plus this was racy anyway.
v2:
- Only INIT_DELAYED_WORK when kzalloc succeeded (Tetsuo)
- Explain that we replace both the timer and a work with the combined
delayed_work (Javier)
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Claudio Suarez <cssk@net-c.es>
Cc: Du Cheng <ducheng2@gmail.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405210335.3434130-7-daniel.vetter@ffwll.ch
fb_set_var requires we hold the fb_info lock. Or at least this now
matches what the ioctl does ...
Note that ps3fb and sh_mobile_lcdcfb are busted in different ways here,
but I will not fix them up.
Also in practice this isn't a big deal, because really variable fbdev
state is actually protected by console_lock (because fbcon just
doesn't bother with lock_fb_info() at all), and lock_fb_info
protecting anything is really just a neat lie. But that's a much
bigger fish to fry.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Qing Wang <wangqing@vivo.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405210335.3434130-6-daniel.vetter@ffwll.ch
Version 2 of GHCB specification defines Non-Automatic-Exit (NAE) to get
extended guest report which is similar to the SNP_GET_REPORT ioctl. The
main difference is related to the additional data that will be returned.
That additional data returned is a certificate blob that can be used by
the SNP guest user. The certificate blob layout is defined in the GHCB
specification. The driver simply treats the blob as a opaque data and
copies it to userspace.
[ bp: Massage commit message, cast 1st arg of access_ok() ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-46-brijesh.singh@amd.com
The SNP_GET_DERIVED_KEY ioctl interface can be used by the SNP guest to
ask the firmware to provide a key derived from a root key. The derived
key may be used by the guest for any purposes it chooses, such as a
sealing key or communicating with the external entities.
See SEV-SNP firmware spec for more information.
[ bp: No need to memset "req" - it will get overwritten. ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Link: https://lore.kernel.org/r/20220307213356.2797205-45-brijesh.singh@amd.com
The SEV-SNP specification provides the guest a mechanism to communicate
with the PSP without risk from a malicious hypervisor who wishes to
read, alter, drop or replay the messages sent. The driver uses
snp_issue_guest_request() to issue GHCB SNP_GUEST_REQUEST or
SNP_EXT_GUEST_REQUEST NAE events to submit the request to PSP.
The PSP requires that all communication should be encrypted using key
specified through a struct snp_guest_platform_data descriptor.
Userspace can use SNP_GET_REPORT ioctl() to query the guest attestation
report.
See SEV-SNP spec section Guest Messages for more details.
[ bp: Remove the "what" from the commit message, massage. ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-44-brijesh.singh@amd.com
Version 2 of the GHCB specification provides a Non Automatic Exit (NAE)
event type that can be used by the SEV-SNP guest to communicate with the
PSP without risk from a malicious hypervisor who wishes to read, alter,
drop or replay the messages sent.
SNP_LAUNCH_UPDATE can insert two special pages into the guest’s memory:
the secrets page and the CPUID page. The PSP firmware populates the
contents of the secrets page. The secrets page contains encryption keys
used by the guest to interact with the firmware. Because the secrets
page is encrypted with the guest’s memory encryption key, the hypervisor
cannot read the keys. See SEV-SNP firmware spec for further details on
the secrets page format.
Create a platform device that the SEV-SNP guest driver can bind to get
the platform resources such as encryption key and message id to use to
communicate with the PSP. The SEV-SNP guest driver provides a userspace
interface to get the attestation report, key derivation, extended
attestation report etc.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-43-brijesh.singh@amd.com
Version 2 of GHCB specification provides SNP_GUEST_REQUEST and
SNP_EXT_GUEST_REQUEST NAE that can be used by the SNP guest to
communicate with the PSP.
While at it, add a snp_issue_guest_request() helper that will be used by
driver or other subsystem to issue the request to PSP.
See SEV-SNP firmware and GHCB spec for more details.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-42-brijesh.singh@amd.com
For debugging purposes it is very useful to have a way to see the full
contents of the SNP CPUID table provided to a guest. Add an sev=debug
kernel command-line option to do so.
Also introduce some infrastructure so that additional options can be
specified via sev=option1[,option2] over time in a consistent manner.
[ bp: Massage, simplify string parsing. ]
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-41-brijesh.singh@amd.com
SEV-SNP guests will be provided the location of special 'secrets' and
'CPUID' pages via the Confidential Computing blob. This blob is
provided to the run-time kernel either through a boot_params field that
was initialized by the boot/compressed kernel, or via a setup_data
structure as defined by the Linux Boot Protocol.
Locate the Confidential Computing blob from these sources and, if found,
use the provided CPUID page/table address to create a copy that the
run-time kernel will use when servicing CPUID instructions via a #VC
handler.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-40-brijesh.singh@amd.com
The run-time kernel will need to access the Confidential Computing blob
very early during boot to access the CPUID table it points to. At that
stage, it will be relying on the identity-mapped page table set up by
the boot/compressed kernel, so make sure the blob and the CPUID table it
points to are mapped in advance.
[ bp: Massage. ]
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-38-brijesh.singh@amd.com
SEV-specific code will need to add some additional mappings, but doing
this within ident_map_64.c requires some SEV-specific helpers to be
exported and some SEV-specific struct definitions to be pulled into
ident_map_64.c. Instead, export add_identity_map() so SEV-specific (and
other subsystem-specific) code can be better contained outside of
ident_map_64.c.
While at it, rename the function to kernel_add_identity_map(), similar
to the kernel_ident_mapping_init() function it relies upon.
No functional changes.
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-37-brijesh.singh@amd.com
SEV-SNP guests will be provided the location of special 'secrets'
'CPUID' pages via the Confidential Computing blob. This blob is
provided to the boot kernel either through an EFI config table entry,
or via a setup_data structure as defined by the Linux Boot Protocol.
Locate the Confidential Computing from these sources and, if found,
use the provided CPUID page/table address to create a copy that the
boot kernel will use when servicing CPUID instructions via a #VC CPUID
handler.
[ bp: s/cpuid/CPUID/ ]
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-36-brijesh.singh@amd.com
The previously defined Confidential Computing blob is provided to the
kernel via a setup_data structure or EFI config table entry. Currently,
these are both checked for by boot/compressed kernel to access the CPUID
table address within it for use with SEV-SNP CPUID enforcement.
To also enable that enforcement for the run-time kernel, similar
access to the CPUID table is needed early on while it's still using
the identity-mapped page table set up by boot/compressed, where global
pointers need to be accessed via fixup_pointer().
This isn't much of an issue for accessing setup_data, and the EFI config
table helper code currently used in boot/compressed *could* be used in
this case as well since they both rely on identity-mapping. However, it
has some reliance on EFI helpers/string constants that would need to be
accessed via fixup_pointer(), and fixing it up while making it shareable
between boot/compressed and run-time kernel is fragile and introduces a
good bit of ugliness.
Instead, add a boot_params->cc_blob_address pointer that the
boot/compressed kernel can initialize so that the run-time kernel can
access the CC blob from there instead of re-scanning the EFI config
table.
Also document these in Documentation/x86/zero-page.rst. While there,
add missing documentation for the acpi_rsdp_addr field, which serves a
similar purpose in providing the run-time kernel a pointer to the ACPI
RSDP table so that it does not need to [re-]scan the EFI configuration
table.
[ bp: Fix typos, massage commit message. ]
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-34-brijesh.singh@amd.com
CPUID instructions generate a #VC exception for SEV-ES/SEV-SNP guests,
for which early handlers are currently set up to handle. In the case
of SEV-SNP, guests can use a configurable location in guest memory
that has been pre-populated with a firmware-validated CPUID table to
look up the relevant CPUID values rather than requesting them from
hypervisor via a VMGEXIT. Add the various hooks in the #VC handlers to
allow CPUID instructions to be handled via the table. The code to
actually configure/enable the table will be added in a subsequent
commit.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-33-brijesh.singh@amd.com
This code will also be used later for SEV-SNP-validated CPUID code in
some cases, so move it to a common helper.
While here, also add a check to terminate in cases where the CPUID
function/subfunction is indexed and the subfunction is non-zero, since
the GHCB MSR protocol does not support non-zero subfunctions.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-32-brijesh.singh@amd.com
While launching encrypted guests, the hypervisor may need to provide
some additional information during the guest boot. When booting under an
EFI-based BIOS, the EFI configuration table contains an entry for the
confidential computing blob that contains the required information.
To support booting encrypted guests on non-EFI VMs, the hypervisor
needs to pass this additional information to the guest kernel using a
different method.
For this purpose, introduce SETUP_CC_BLOB type in setup_data to hold
the physical address of the confidential computing blob location. The
boot loader or hypervisor may choose to use this method instead of an
EFI configuration table. The CC blob location scanning should give
preference to a setup_data blob over an EFI configuration table.
In AMD SEV-SNP, the CC blob contains the address of the secrets and
CPUID pages. The secrets page includes information such as a VM to PSP
communication key and the CPUID page contains PSP-filtered CPUID values.
Define the AMD SEV confidential computing blob structure.
While at it, define the EFI GUID for the confidential computing blob.
[ bp: Massage commit message, mark struct __packed. ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220307213356.2797205-30-brijesh.singh@amd.com
Fix a NULL deref crash that occurs when an svc_rqst is deferred
while the sunrpc tracing subsystem is enabled. svc_revisit() sets
dr->xprt to NULL, so it can't be relied upon in the tracepoint to
provide the remote's address.
Unfortunately we can't revert the "svc_deferred_class" hunk in
commit ece200ddd5 ("sunrpc: Save remote presentation address in
svc_xprt for trace events") because there is now a specific check
of event format specifiers for unsafe dereferences. The warning
that check emits is:
event svc_defer_recv has unsafe dereference of argument 1
A "%pISpc" format specifier with a "struct sockaddr *" is indeed
flagged by this check.
Instead, take the brute-force approach used by the svcrdma_qp_error
tracepoint. Convert the dr::addr field into a presentation address
in the TP_fast_assign() arm of the trace event, and store that as
a string. This fix can be backported to -stable kernels.
In the meantime, commit c6ced22997 ("tracing: Update print fmt
check to handle new __get_sockaddr() macro") is now in v5.18, so
this wonky fix can be replaced with __sockaddr() and friends
properly during the v5.19 merge window.
Fixes: ece200ddd5 ("sunrpc: Save remote presentation address in svc_xprt for trace events")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
page_mapped_in_vma() sets nr_pages to 1, which is usually correct as we
only want to know about the precise page and not about other pages in
the folio. However, hugetlbfs does want to know about the entire hpage,
and using nr_pages to get the size of the hpage is wrong. We could
change page_mapped_in_vma() to special-case hugetlbfs pages, but it's
better to ignore nr_pages in page_vma_mapped_walk() and get the size
from the VMA instead.
Fixes: 2aff7a4755 ("mm: Convert page_vma_mapped_walk to work on PFNs")
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
[edit commit message, use hstate directly]
Simplify new_page() by unifying the THP and base page cases, and
handle orders other than 0 and HPAGE_PMD_ORDER correctly.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
This wrapper around alloc_pages_vma() calls prep_transhuge_page(),
removing the obligation from the caller. This is in the same spirit
as __folio_alloc().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Unify alloc_misplaced_dst_page() and alloc_misplaced_dst_page_thp().
Removes an assumption that compound pages are HPAGE_PMD_ORDER.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
This removes an assumption that a large folio is HPAGE_PMD_ORDER
as well as letting us remove the call to prep_transhuge_page()
and a few hidden calls to compound_head().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Calling try_to_unmap() with TTU_SPLIT_HUGE_PMD and a folio that's not
mapped by a PMD causes oopses on arm64 because we now call page_folio()
on an invalid page. pmd_page() returns a valid page for non-leaf PMDs on
some architectures, so this bug escaped testing before now. Fix this bug
by delaying the call to pmd_page() until after we know the PMD is a leaf.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215804
Fixes: af28a988b3 ("mm/huge_memory: Convert __split_huge_pmd() to take a folio")
Reported-by: Zorro Lang <zlang@redhat.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Zorro Lang <zlang@redhat.com>
The commit 73511edf8b ("dma-buf: specify usage while adding fences to
dma_resv obj v7") ported all the DRM drivers to use the newer fence API
that specifies the usage with the enum dma_resv_usage rather than doing
an explicit shared / exclusive distinction.
But the commit didn't do it properly in two callers of the vc4 driver,
leading to build errors.
Fixes: 73511edf8b ("dma-buf: specify usage while adding fences to dma_resv obj v7")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220407131950.915091-1-javierm@redhat.com
The SINO WEALTH SH1106 is an OLED display driver that is somewhat
compatible with the SSD1306. It supports a slightly wider display,
at 132 instead of 128 pixels. The basic commands are the same, but
the SH1106 doesn't support the horizontal or vertical address modes.
Add support for this display driver. The default values for some of
the hardware settings are taken from the datasheet.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220406172956.3953-5-wens@kernel.org
On the SINO WEALTH SH1106, which is mostly compatible with the SSD1306,
only the basic page addressing mode is supported. This addressing mode
is not as easy to use compared to the currently supported horizontal
addressing mode, as the page address has to be set prior to writing
out each page, and each page must be written out separately as a result.
Also, there is no way to force the column address to wrap around early,
thus the column address must also be reset for each page to be accurate.
Add support for this addressing mode, with a flag to choose it. This
flag is designed to be set from the device info data structure, but
can be extended to be explicitly forced on through a device tree
property if such a need arises.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220406172956.3953-4-wens@kernel.org
The SINO WEALTH SH1106 is an OLED display driver that is somewhat
compatible with the SSD1306. It supports a slightly wider display,
at 132 instead of 128 pixels. The basic commands are the same, but
the SH1106 doesn't support the horizontal or vertical address modes.
Add a compatible string for it.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220406172956.3953-3-wens@kernel.org
Freq caps (i.e. RP0, RP1 and RPn frequencies) are read from HW. However the
formats (bit positions, widths, registers and units) of these vary for
different generations with even more variations arriving in the future. In
order not to have to do identical computation for these caps in multiple
places, here we centralize the computation of these caps. This makes the
code cleaner and also more extensible for the future.
v2: Clarify that caps are in "hw units" in comments (Lucas De Marchi)
v3: Minor checkpatch fix
v4: s/intel_rps_get_freq_caps/gen6_rps_get_freq_caps/ (Badal Nilawar)
v5: Changes comments to kernel doc (Anshuman Gupta)
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220406191848.20895-1-ashutosh.dixit@intel.com
