Sync up with v5.18-rc1, in particular to get 5e3094cfd9
("drm/i915/xehpsdv: Add has_flat_ccs to device info").
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The RTL931x SoC series has support for 32 GPIOs, although not all lines
may be broken out to a physical pad.
The GPIO bank's parent interrupt can be routed to either or both of the
SoC's CPU cores by the GIC. Line-by-line IRQ balancing is not possible
on these SoCs.
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Add the "realtek,rlt9310-gpio", "realtek,otto-gpio" compatible for GPIO
nodes on the RTL931x SoC series.
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
The RTL930x SoC series has support for 24 GPIOs, with the port order
reversed compared to RTL838x and RTL839x. The RTL930x series also has
two CPUs (VPEs) and can distribute individual GPIO interrupts between
them.
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
On SoCs with multiple cores, it is possible that the GPIO interrupt
controller supports assigning specific pins to one or more cores.
IRQ balancing can be performed on a line-by-line basis if the parent
interrupt is routed to all available cores, which is the default upon
initialisation.
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
The driver currently programs the system pasid to the WQ preemptively when
system pasid is enabled. Given that a dwq will reprogram the pasid and
possibly a different pasid, the programming is not necessary. The pasid_en
bit can be set for swq as it does not need pasid programming but
needs the pasid_en bit. Remove system pasid programming on device config
write. Add pasid programming for kernel wq type on wq driver enable. The
char dev driver already reprograms the dwq on ->open() call so there's no
change.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/164935607115.1660372.6734518676950372366.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
kongweibin reported a kernel panic in ip6_forward() when input interface
has no in6 dev associated.
The following tc commands were used to reproduce this panic:
tc qdisc del dev vxlan100 root
tc qdisc add dev vxlan100 root netem corrupt 5%
CC: stable@vger.kernel.org
Fixes: ccd27f05ae ("ipv6: fix 'disable_policy' for fwd packets")
Reported-by: kongweibin <kongweibin2@huawei.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit 1771afd474 ("net: cpsw: avoid alignment faults by taking
NET_IP_ALIGN into account") the TI CPSW driver was switched to use correct
define CPSW_HEADROOM_NA to avoid alignment faults, but there are two places
left where CPSW_HEADROOM is still used (without causing issues).
Hence, completely drop CPSW_HEADROOM define and use CPSW_HEADROOM_NA
everywhere to avoid further mistakes in code.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Both of of_get_parent() and of_parse_phandle() return node pointer with
refcount incremented, use of_node_put() on it to decrease refcount
when done.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
The GPIO port layout on the RTL930x SoC series is reversed compared to
the RTL838x and RTL839x SoC series. Add new port offset calculator
functions to ensure the correct order is used when reading port IRQ
data, and ensure bgpio uses the right byte ordering.
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Add the "realtek,rlt9300-gpio", "realtek,otto-gpio" compatible for GPIO
nodes on the RTL930x SoC series. This SoC requires an extra register
range, defining the interrupt CPU mapping registers.
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq_optional().
There are no non-DT users for this driver so interrupt range
(irq_res->start-irq_res->end) is no longer required and with DT we will
be sure it will be a single IRQ resource for each index.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220404155557.27316-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Mat Martineau says:
====================
mptcp: Miscellaneous changes for 5.19
Four separate groups of patches here:
Patch 1 optimizes flag checking when releasing mptcp socket locks.
Patches 2 and 3 update the packet scheduler when subflow priorities
change.
Patch 4 adds some pernet helper functions for MPTCP.
Patches 5-8 add diag support for MPTCP listeners, including a selftest.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Check dumping of mptcp listener sockets:
1. filter by dport should not return any results
2. filter by sport should return listen sk
3. filter by saddr+sport should return listen sk
4. no filter should return listen sk
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
makes 'ss -Ml' show mptcp listen sockets.
Iterate over the tcp listen sockets and pick those that have mptcp ulp
info attached.
mptcp_diag_get_info() is modified to prefer msk->first for mptcp sockets
in listen state. This reports accurate number for recv and send queue
(pending / max connection backlog counters).
Sample output:
ss -Mil
State Recv-Q Send-Q Local Address:Port Peer Address:Port
LISTEN 0 20 127.0.0.1:12000 0.0.0.0:*
subflows_max:2
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Problem is that listener iteration would call this from atomic context
so this locking is not allowed.
One way is to drop locks before calling the helper, but afaics the lock
isn't really needed, all values are fetched via READ_ONCE().
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds two pm_nl_pernet related helpers, named pm_nl_get_pernet()
and pm_nl_get_pernet_from_msk() to get pm_nl_pernet from 'net' or 'msk'.
Use these helpers instead of using net_generic() directly.
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When an incoming MP_PRIO option changes the backup
status of any subflow, we need to reset the packet
scheduler status, or the next send could keep using
the previously selected subflow, without taking in account
the new priorities.
Reported-by: Davide Caratti <dcaratti@redhat.com>
Fixes: 40453a5c61 ("mptcp: add the incoming MP_PRIO support")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mptcp release callback checks several flags in atomic
context, but only MPTCP_CLEAN_UNA can be up frequently.
Reorganize the code to avoid multiple conditionals in the
most common scenarios.
Additional clarify a related comment.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Replace unnecessary list_for_each_entry_continue() in nf_tables,
from Jakob Koschel.
2) Add struct nf_conntrack_net_ecache to conntrack event cache and
use it, from Florian Westphal.
3) Refactor ctnetlink_dump_list(), also from Florian.
4) Bump module reference counter on cttimeout object addition/removal,
from Florian.
5) Consolidate nf_log MAC printer, from Phil Sutter.
6) Add basic logging support for unknown ethertype, from Phil Sutter.
7) Consolidate check for sysctl nf_log_all_netns toggle, also from Phil.
8) Replace hardcode value in nft_bitwise, from Jeremy Sowden.
9) Rename BASIC-like goto tags in nft_bitwise to more meaningful names,
also from Jeremy.
10) nft_fib support for reverse path filtering with policy-based routing
on iif. Extend selftests to cover for this new usecase, from Florian.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit b98ce2f4e3 ("dmaengine: imx-sdma: add uart rom script") broke
uart rx on imx5 when using sdma firmware from older Freescale 2.6.35
kernel. In this case reading addr->uartXX_2_mcu_addr was going out of
bounds of the firmware memory and corrupting the uart script addresses.
Simply adding a bounds check before accessing addr->uartXX_2_mcu_addr
does not work as the uartXX_2_mcu_addr members are now beyond the size
of the older firmware and the uart addresses would never be populated
in that case. There are other ways to fix this but overall the logic
seems clearer to me to revert the uartXX_2_mcu_ram_addr structure
entries back to uartXX_2_mcu_addr, change the newer entries to
uartXX_2_mcu_rom_addr and update the logic accordingly.
I have tested this patch on:
1. An i.MX53 system with sdma firmware from Freescale 2.6.35 kernel.
Without this patch uart rx is broken in this scenario, with the
patch uart rx is restored.
2. An i.MX6D system with no external sdma firmware. uart is okay with
or without this patch.
3. An i.MX8MM system using current sdma-imx7d.bin firmware from
linux-firmware. uart is okay with or without this patch and I
confirmed the rom version of the uart script is being used which was
the intention and reason for commit b98ce2f4e3 ("dmaengine:
imx-sdma: add uart rom script") in the first place.
Fixes: b98ce2f4e3 ("dmaengine: imx-sdma: add uart rom script")
Cc: stable@vger.kernel.org
Signed-off-by: Kevin Groeneveld <kgroeneveld@lenbrook.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20220410223118.15086-1-kgroeneveld@lenbrook.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
cgroupv2 helper function ignores the already-looked up sk
and uses skb->sk instead.
Just pass sk from the calling function instead; this will
make cgroup matching work for udp and tcp in input even when
edemux did not set skb->sk already.
Fixes: e0bb96db96 ("netfilter: nft_socket: add support for cgroupsv2")
Signed-off-by: Florian Westphal <fw@strlen.de>
Tested-by: Topi Miettinen <toiwoton@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Its now possible to use fib expression in the forward chain (where both
the input and output interfaces are known).
Add a simple test case for this.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
If policy-based routing using the iif selector is used, then the fib
expression fails to look up for the reverse path from the prerouting
hook because the input interface cannot be inferred. In order to support
this scenario, extend the fib expression to allow to use after the route
lookup, from the forward hook.
This patch also adds support for the input hook for usability reasons.
Since the prerouting hook cannot be used for the scenario described
above, users need two rules: one for the forward chain and another rule
for the input chain to check for the reverse path check for locally
targeted traffic.
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Synchronize additions to nontrans_list of transmitting BSS with
bss_lock to avoid races. Also when cfg80211_add_nontrans_list() fails
__cfg80211_unlink_bss() needs bss_lock to be held (has lockdep assert
on bss_lock). So protect the whole block with bss_lock to avoid
races and warnings. Found during code review.
Fixes: 0b8fb8235b ("cfg80211: Parsing of Multiple BSSID information in scanning")
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Link: https://lore.kernel.org/r/1649668071-9370-1-git-send-email-quic_ramess@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
A user may set the SO_TXTIME socket option to ensure a packet is send
at a given time. The taprio scheduler has to confirm, that it is allowed
to send a packet at that given time, by a check against the packet time
schedule. The scheduler drop the packet, if the gates are closed at the
given send time.
The check, if SO_TXTIME is set, may fail since sk_flags are part of an
union and the union is used otherwise. This happen, if a socket is not
a full socket, like a request socket for example.
Add a check to verify, if the union is used for sk_flags.
Fixes: 4cfd5779bd ("taprio: Add support for txtime-assist mode")
Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Descriptor fields are little-endian
Fixes: 804775dfc2 ("net: ethernet: mtk_eth_soc: add support for Wireless Ethernet Dispatch (WED)")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: David S. Miller <davem@davemloft.net>
The goldfish TTY device was clearly defined as having little-endian
registers, but the switch to __raw_{read,write}l(() broke its driver
when running on big-endian kernels (if anyone ever tried this).
The m68k qemu implementation got this wrong, and assumed native-endian
registers. While this is a bug in qemu, it is probably impossible to
fix that since there is no way of knowing which other operating systems
have started relying on that bug over the years.
Hence revert commit da31de35cd ("tty: goldfish: use
__raw_writel()/__raw_readl()", and define gf_ioread32()/gf_iowrite32()
to be able to use accessors defined by the architecture.
Cc: stable@vger.kernel.org # v5.11+
Fixes: da31de35cd ("tty: goldfish: use __raw_writel()/__raw_readl()")
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Link: https://lore.kernel.org/r/20220406201523.243733-2-laurent@vivier.eu
[geert: Add rationale based on Arnd's comments]
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
If syscon_regmap_lookup_by_phandle() fails, it never return NULL pointer,
change the check to IS_ERR().
Fixes: 804775dfc2 ("net: ethernet: mtk_eth_soc: add support for Wireless Ethernet Dispatch (WED)")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
