With commit 13046370c4 ("ALSA: hda/hdmi: let new platforms assign the
pcm slot dynamically"), old behaviour to consider the HDA pin number,
when choosing PCM to assign, was dropped.
Build on this change and limit the number of PCMs created to number of
converters (= maximum number of concurrent display/receivers) when
"mst_no_extra_pcms" and "dyn_pcm_no_legacy" quirks are both set.
Fix the check in hdmi_find_pcm_slot() to ensure only spec->pcm_used
entries are considered in the search. Elsewhere in the driver
spec->pcm_used is already checked properly.
Doing this avoids following warning at SOF driver probe for multiple
machine drivers:
[ 112.425297] sof_sdw sof_sdw: hda_dsp_hdmi_build_controls: no
PCM in topology for HDMI converter 4
[ 112.425298] sof_sdw sof_sdw: hda_dsp_hdmi_build_controls: no
PCM in topology for HDMI converter 5
[ 112.425299] sof_sdw sof_sdw: hda_dsp_hdmi_build_controls: no
PCM in topology for HDMI converter 6
Fixes: 13046370c4 ("ALSA: hda/hdmi: let new platforms assign the pcm slot dynamically")
BugLink: https://github.com/thesofproject/linux/issues/2573
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20220414150516.3638283-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We observed: 'dmasound_setup' defined but not used error with
COMPILER=gcc ARCH=m68k DEFCONFIG=allmodconfig build.
Fix it by adding __maybe_unused to dmasound_setup.
Error(s):
sound/oss/dmasound/dmasound_core.c:1431:12: error: 'dmasound_setup' defined but not used [-Werror=unused-function]
Fixes: 9dd7c46346 ("sound/oss/dmasound: fix build when drivers are mixed =y/=m")
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20220414091940.2216-1-miles.chen@mediatek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. The value of the modem status command (MSC) frame
contains an address field, control signal and optional break signal octet.
The address field is encoded as described in chapter 5.2.1.2 with only one
octet (may be extended to more in future versions of the standard). Whereas
the control signal and break signal octet are always one byte each. This is
strange at first glance as it makes the EA bit redundant. However, the same
two octets are also encoded as header in convergence layer type 2 as
described in chapter 5.5.2. No header length field is given and the only
way to test if there is an optional break signal octet is via the EA flag
which extends the control signal octet with a break signal octet. Now it
becomes obvious how the EA bit for those two octets shall be encoded in the
MSC frame. The current implementation treats the signal octet different for
MSC frame and convergence layer type 2 header even though the standard
describes it for both in the same way.
Use the EA bit to encode the signal octets not only in the convergence
layer type 2 header but also in the MSC frame in the same way with either
1 or 2 bytes in case of an optional break signal. Adjust the receiving path
accordingly in gsm_control_modem().
Fixes: 3ac06b9056 ("tty: n_gsm: Fix for modems with brk in modem status control")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220414094225.4527-13-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.4.6.1 states that each command frame shall
be made up from type, length and value. Looking for example in chapter
5.4.6.3.5 at the description for the encoding of a flow control on command
it becomes obvious, that the type and length field is always present
whereas the value may be zero bytes long. The current implementation omits
the length field if the value is not present. This is wrong.
Correct this by always sending the length in gsm_control_transmit().
So far only the modem status command (MSC) has included a value and encoded
its length directly. Therefore, also change gsmtty_modem_update().
Fixes: e1eaea46bb ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220414094225.4527-12-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.7.3 states that the valid range for the
maximum number of retransmissions (N2) is from 0 to 255 (both including).
gsm_config() fails to limit this range correctly. Furthermore,
gsm_control_retransmit() handles this number incorrectly by performing
N2 - 1 retransmission attempts. Setting N2 to zero results in more than 255
retransmission attempts.
Fix the range check in gsm_config() and the value handling in
gsm_control_send() and gsm_control_retransmit() to comply with 3GPP 27.010.
Fixes: e1eaea46bb ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220414094225.4527-11-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In gsm_cleanup_mux() the muxer is closed down and all queues are removed.
However, removing the queues is done without explicit control of the
underlying buffers. Flush those before freeing up our queues to ensure
that all outgoing queues are cleared consistently. Otherwise, a new mux
connection establishment attempt may time out while the underlying tty is
still busy sending out the remaining data from the previous connection.
Fixes: e1eaea46bb ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220414094225.4527-10-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.7.2 states that the maximum frame size
(N1) refers to the length of the information field (i.e. user payload).
However, 'txframe' stores the whole frame including frame header, checksum
and start/end flags. We also need to consider the byte stuffing overhead.
Define constant for the protocol overhead and adjust the 'txframe' size
calculation accordingly to reserve enough space for a complete mux frame
including byte stuffing for advanced option mode. Note that no byte
stuffing is applied to the start and end flag.
Also use MAX_MTU instead of MAX_MRU as this buffer is used for data
transmission.
Fixes: e1eaea46bb ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220414094225.4527-8-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The frame checksum (FCS) is currently handled in gsm_queue() after
reception of a frame. However, this breaks layering. A workaround with
'received_fcs' was implemented so far.
Furthermore, frames are handled as such even if no end flag was received.
Move FCS calculation from gsm_queue() to gsm0_receive() and gsm1_receive().
Also delay gsm_queue() call there until a full frame was received to fix
both points.
Fixes: e1eaea46bb ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220414094225.4527-6-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.5.2 describes that the signal octet in
convergence layer type 2 can be either one or two bytes. The length is
encoded in the EA bit. This is set 1 for the last byte in the sequence.
gsmtty_modem_update() handles this correctly but gsm_dlci_data_output()
fails to set EA to 1. There is no case in which we encode two signal octets
as there is no case in which we send out a break signal.
Therefore, always set the EA bit to 1 for the signal octet to fix this.
Fixes: e1eaea46bb ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220414094225.4527-5-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Internally, we manage the alive state of the mux channels and mux itself
with the field member 'dead'. This makes it possible to notify the user
if the accessed underlying link is already gone. On the other hand,
however, removing the virtual ttys before terminating the channels may
result in peer messages being received without any internal target. Move
the mux cleanup procedure from gsmld_detach_gsm() to gsmld_close() to fix
this by keeping the virtual ttys open until the mux has been cleaned up.
Fixes: e1eaea46bb ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220414094225.4527-4-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The active mux instances are managed in the gsm_mux array and via mux_get()
and mux_put() functions separately. This gives a very loose coupling
between the actual instance and the gsm_mux array which manages it. It also
results in unnecessary lockings which makes it prone to failures. And it
creates a race condition if more than the maximum number of mux instances
are requested while the user changes the parameters of an active instance.
The user may loose ownership of the current mux instance in this case.
Fix this by moving the gsm_mux array handling to the mux allocation and
deallocation functions.
Fixes: e1eaea46bb ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220414094225.4527-3-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.8.2 states that both sides will revert to
the non-multiplexed mode via a close-down message (CLD). The usual program
flow is as following:
- start multiplex mode by sending AT+CMUX to the mobile
- establish the control channel (DLCI 0)
- establish user channels (DLCI >0)
- terminate user channels
- send close-down message (CLD)
- revert to AT protocol (i.e. leave multiplexed mode)
The AT protocol is out of scope of the n_gsm driver. However,
gsm_disconnect() sends CLD if gsm_config() detects that the requested
parameters require the mux protocol to restart. The next immediate action
is to start the mux protocol by opening DLCI 0 again. Any responder side
which handles CLD commands correctly forces us to fail at this point
because AT+CMUX needs to be sent to the mobile to start the mux again.
Therefore, remove the CLD command in this phase and keep both sides in
multiplexed mode.
Remove the gsm_disconnect() function as it become unnecessary and merge the
remaining parts into gsm_cleanup_mux() to handle the termination order and
locking correctly.
Fixes: 71e0779153 ("tty: n_gsm: do not send/receive in ldisc close path")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220414094225.4527-2-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, only the initiator resets the mux protocol if the user requests
new parameters that are incompatible to those of the current connection.
The responder also needs to reset the multiplexer if the new parameter set
requires this. Otherwise, we end up with an inconsistent parameter set
between initiator and responder.
Revert the old behavior to inform the peer upon an incompatible parameter
set change from the user on the responder side by re-establishing the mux
protocol in such case.
Fixes: 509067bbd2 ("tty: n_gsm: Delete gsm_disconnect when config requester")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220414094225.4527-1-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Qemu unconditionally reports a UUID, which depending on the qemu version
is either all-null (which is incorrect but harmless) or contains a single
bit set for all controllers. In addition it can also optionally report
a eui64 which needs to be manually set. Disable namespace identifiers
for Qemu controlles entirely even if in some cases they could be set
correctly through manual intervention.
Reported-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
The MAXIO MAP1002/1202 controllers reports completely bogus Namespace
identifiers that even change after suspend cycles. Disable using
the Identifiers entirely.
Reported-by: 金韬 <me@kingtous.cn>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Tested-by: 金韬 <me@kingtous.cn>
Add a quirk to disable using and exporting namespace identifiers for
controllers where they are broken beyond repair.
The most directly visible problem with non-unique namespace identifiers
is that they break the /dev/disk/by-id/ links, with the link for a
supposedly unique identifier now pointing to one of multiple possible
namespaces that share the same ID, and a somewhat random selection of
which one actually shows up.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Use the RQF_QUIET flag to skip the newly added verbose error reporting,
and set the flag in __nvme_submit_sync_cmd, which is used for most
internal passthrough requests where we do expect errors (e.g. due to
probing for optional functionality). This is similar to what the SCSI
verbose error logging does.
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Alan Adamson <alan.adamson@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Alan Adamson <alan.adamson@oracle.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
If we (re-)calculate the file system overhead amount and it's
different from the on-disk s_overhead_clusters value, update the
on-disk version since this can take potentially quite a while on
bigalloc file systems.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
If the file system does not use bigalloc, calculating the overhead is
cheap, so force the recalculation of the overhead so we don't have to
trust the precalculated overhead in the superblock.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Currently ksmbd is using ->f_bsize from vfs_statfs() as sector size.
If fat/exfat is a local share, ->f_bsize is a cluster size that is too
large to be used as a sector size. Sector sizes larger than 4K cause
problem occurs when mounting an iso file through windows client.
The error message can be obtained using Mount-DiskImage command,
the error is:
"Mount-DiskImage : The sector size of the physical disk on which the
virtual disk resides is not supported."
This patch reports fixed 4KB sector size if ->s_blocksize is bigger
than 4KB.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
If the filename is change by underlying rename the server, fp->filename
and real filename can be different. This patch remove the uses of
fp->filename in ksmbd and replace it with d_path().
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The kernel calculation was underestimating the overhead by not taking
into account the reserved gdt blocks. With this change, the overhead
calculated by the kernel matches the overhead calculation in mke2fs.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
The intent behind commit e6fc9f62ce ("dm: flag clones created by
__send_duplicate_bios") was to formally disallow the use of
dm_accept_partial_bio() where it simply isn't possible -- due to
constraint that multiple bios cannot meaningfully update a shared
tio->len_ptr.
But that commit went too far and disallowed the case where "abormal"
IO (e.g. WRITE_ZEROES) is only using a single bio. Fix this by
not marking a dm_io with a single dm_target_io (and bio), that happens
to be created by __send_duplicate_bios, as DM_TIO_IS_DUPLICATE_BIO.
Also remove 'unsigned *len' parameter from alloc_multiple_bios().
This commit fixes a dm_accept_partial_bio() BUG_ON() with dm-zoned
when a WRITE_ZEROES bio is issued.
Fixes: 655f3aad7a ("dm: switch dm_target_io booleans over to proper flags")
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
The latest GuC firmware drops the context descriptor pool in favour of
passing all creation data in the create H2G. It also greatly simplifies
the work queue and removes the process descriptor used for multi-LRC
submission. So, remove all mention of LRC and process descriptors and
update the registration code accordingly.
Unfortunately, the new API also removes the ability to set default
values for the scheduling policies at context registration time.
Instead, a follow up H2G must be sent. The individual scheduling
policy update H2G commands are also dropped in favour of a single KLV
based H2G. So, change the update wrappers accordingly and call this
during context registration..
Of course, this second H2G per registration might fail due to being
backed up. The registration code has a complicated state machine to
cope with the actual registration call failing. However, if that works
then there is no support for unwinding if a further call should fail.
Unwinding would require sending a H2G to de-register - but that can't
be done because the CTB is already backed up.
So instead, add a new flag to say whether the context has a pending
policy update. This is set if the policy H2G fails at registration
time. The submission code checks for this flag and retries the policy
update if set. If that call fails, the submission path early exists
with a retry error. This is something that is already supported for
other reasons.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220412225955.1802543-2-John.C.Harrison@Intel.com
Pull drm fixes from Dave Airlie:
"Eggs season holidays are among us, and I think I'd expect some smaller
pulls for two weeks then.
This seems eerily quiet. One i915 fix, amdgpu has a bunch and msm. I
didn't see a misc pull this week, so I expect that will catch up next
week.
i915:
- Correct legacy mmap disabling to use GRAPHICS_VER_FULL
msm:
- system suspend fix
- kzalloc return checks
- misc display fix
- iommu_present removal
amdgpu:
- Fix for alpha properly in pre-multiplied mode
- Fix VCN 3.1.2 firmware name
- Suspend/resume fix
- Add a gfxoff quirk for Mac vega20 board
- DCN 3.1.6 spread spectrum fix"
* tag 'drm-fixes-2022-04-15' of git://anongit.freedesktop.org/drm/drm:
drm/amd/display: remove dtbclk_ss compensation for dcn316
drm/amdgpu: Enable gfxoff quirk on MacBook Pro
drm/amdgpu: Ensure HDA function is suspended before ASIC reset
drm/amdgpu: fix VCN 3.1.2 firmware name
drm/amd/display: don't ignore alpha property on pre-multiplied mode
drm/msm/gpu: Avoid -Wunused-function with !CONFIG_PM_SLEEP
drm/msm/dp: add fail safe mode outside of event_mutex context
drm/msm/dsi: Use connector directly in msm_dsi_manager_connector_init()
drm/msm: Stop using iommu_present()
drm/msm/mdp5: check the return of kzalloc()
drm/msm: Fix range size vs end confusion
drm/i915: Sunset igpu legacy mmap support based on GRAPHICS_VER_FULL
drm/msm/dpu: Use indexed array initializer to prevent mismatches
drm/msm/disp: check the return value of kzalloc()
dt-bindings: display/msm: another fix for the dpu-qcm2290 example
drm/msm: Add missing put_task_struct() in debugfs path
drm/msm/gpu: Remove mutex from wait_event condition
drm/msm/gpu: Park scheduler threads for system suspend
drm/msm/gpu: Rename runtime suspend/resume functions
Pull vfio fix from Alex Williamson:
- Fix VF token checking for vfio-pci variant drivers (Jason Gunthorpe)
* tag 'vfio-v5.18-rc3' of https://github.com/awilliam/linux-vfio:
vfio/pci: Fix vf_token mechanism when device-specific VF drivers are used
Pull cifs fixes from Steve French:
- two fixes related to unmount
- symlink overflow fix
- minor netfs fix
- improved tracing for crediting (flow control)
* tag '5.18-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: verify that tcon is valid before dereference in cifs_kill_sb
cifs: potential buffer overflow in handling symlinks
cifs: Split the smb3_add_credits tracepoint
cifs: release cached dentries only if mount is complete
cifs: Check the IOCB_DIRECT flag, not O_DIRECT
When asked to create a path ending '/', but which is not to be a
directory (LOOKUP_DIRECTORY not set), filename_create() will never try
to create the file. If it doesn't exist, -ENOENT is reported.
However, it still passes LOOKUP_CREATE|LOOKUP_EXCL to the filesystems
->lookup() function, even though there is no intent to create. This is
misleading and can cause incorrect behaviour.
If you try
ln -s foo /path/dir/
where 'dir' is a directory on an NFS filesystem which is not currently
known in the dcache, this will fail with ENOENT.
But as the name is not in the dcache, nfs_lookup gets called with
LOOKUP_CREATE|LOOKUP_EXCL and so it returns NULL without performing any
lookup, with the expectation that a subsequent call to create the target
will be made, and the lookup can be combined with the creation. In the
case with a trailing '/' and no LOOKUP_DIRECTORY, that call is never
made. Instead filename_create() sees that the dentry is not (yet)
positive and returns -ENOENT - even though the directory actually
exists.
So only set LOOKUP_CREATE|LOOKUP_EXCL if there really is an intent to
create, and use the absence of these flags to decide if -ENOENT should
be returned.
Note that filename_parentat() is only interested in LOOKUP_REVAL, so we
split that out and store it in 'reval_flag'. __lookup_hash() then gets
reval_flag combined with whatever create flags were determined to be
needed.
Reviewed-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
AT91 fixes#1 for 5.18:
Only DT fixes. They cover syntax issues as well as features:
- fix dtschema check warnings for DMA channel entries, boolean
properties and flash names
- sam9g20ek audio clock and regulator description
- sama5d[34]_xplained SPI pinctrl
- align DT with hardware subtleties on sama7g5ek
* tag 'at91-fixes-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: fix pinctrl phandles
ARM: dts: at91: sama5d4_xplained: fix pinctrl phandle name
ARM: dts: at91: Describe regulators on at91sam9g20ek
ARM: dts: at91: Map MCLK for wm8731 on at91sam9g20ek
ARM: dts: at91: Fix boolean properties with values
ARM: dts: at91: use generic node name for dataflash
ARM: dts: at91: align SPI NOR node name with dtschema
ARM: dts: at91: sama7g5ek: Align the impedance of the QSPI0's HSIO and PCB lines
ARM: dts: at91: sama7g5ek: enable pull-up on flexcom3 console lines
ARM: dts: at91: sama7g5: Swap `rx` and `tx` for `i2c` nodes
Link: https://lore.kernel.org/r/20220414143318.26363-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Gemini defconfig needs to be updated due to DSA driver
Kconfig changes in the v5.18 merge window:
CONFIG_NET_DSA_REALTEK_SMI is now behind
CONFIG_NET_DSA_REALTEK and the desired DSA switch need
to be selected explicitly with
CONFIG_NET_DSA_REALTEK_RTL8366RB.
Take this opportunity to update some other minor config
options:
- CONFIG_MARVELL_PHY moved around because of Kconfig
changes.
- CONFIG_SENSORS_DRIVETEMP should be selected since is
regulates the system critical alert temperature on
some devices, which is nice if it is handled even
if initramfs or root fails to mount.
Fixes: 319a70a5fe ("net: dsa: realtek-smi: move to subdirectory")
Fixes: 765c39a4fa ("net: dsa: realtek: convert subdrivers into modules")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Cc: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
