Drop duplicate macro min() definition in mq_perf_tests.c, use MIN() in
sys/param.h instead.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
bpf_{sk,task,inode}_storage_free() do not need to use
call_rcu_tasks_trace as no BPF program should be accessing the owner
as it's being destroyed. The only other reader at this point is
bpf_local_storage_map_free() which uses normal RCU.
The only path that needs trace RCU are:
* bpf_local_storage_{delete,update} helpers
* map_{delete,update}_elem() syscalls
Fixes: 0fe4b381a5 ("bpf: Allow bpf_local_storage to be used by sleepable programs")
Signed-off-by: KP Singh <kpsingh@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220418155158.2865678-1-kpsingh@kernel.org
Add <asm/smp.h> for cpuid_to_hartid_map etc.
This is needed for both SMP and non-SMP builds, but not having it
causes a build error for non-SMP:
drivers/cpuidle/cpuidle-riscv-sbi.c: In function 'sbi_cpuidle_init_cpu':
drivers/cpuidle/cpuidle-riscv-sbi.c:350:26: error: implicit declaration of function 'cpuid_to_hartid_map' [-Werror=implicit-function-declaration]
Fixes: 6abf32f1d9 ("cpuidle: Add RISC-V SBI CPU idle driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
On mt8192, the pinctrl node has pinctrl groups to group pin
configurations. Each pinctrl group contains one or more pinmux subnodes
to list needed pins and their configurations. By supporting multiple
subnodes, we can configure different pin characteristics
(driving/pull-up/pull-down/etc.) in a pinctrl group.
Update the mt8192 pinctrl dt-binding to add the missing pinctrl group
node that wraps the pinmux subnodes and update the example at the end.
While at it, also remove the example embedded in the description since
it is redundant to the already supplied example at the end.
This same change was done for mt8195 in commit 79dcd4e840 ("dt-bindings:
pinctrl: mt8195: add wrapping node of pin configurations").
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220315211936.442708-2-nfraprado@collabora.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Kumar Kartikeya Dwivedi says:
====================
When iterating over modifiers, ensure that type tags can only occur at head of
the chain, and don't occur later, such that checking for them once in the start
tells us there are no more type tags in later modifiers. Clang already ensures
to emit such BTF, but user can craft their own BTF which violates such
assumptions if relied upon in the kernel.
Changelog:
----------
v2 -> v3
v2: https://lore.kernel.org/bpf/20220418224719.1604889-1-memxor@gmail.com
* Address nit from Yonghong, add Acked-by
v1 -> v2
v1: https://lore.kernel.org/bpf/20220406004121.282699-1-memxor@gmail.com
* Fix for bug pointed out by Yonghong
* Update selftests to include Yonghong's example
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
It is guaranteed that for modifiers, clang always places type tags
before other modifiers, and then the base type. We would like to rely on
this guarantee inside the kernel to make it simple to parse type tags
from BTF.
However, a user would be allowed to construct a BTF without such
guarantees. Hence, add a pass to check that in modifier chains, type
tags only occur at the head of the chain, and then don't occur later in
the chain.
If we see a type tag, we can have one or more type tags preceding other
modifiers that then never have another type tag. If we see other
modifiers, all modifiers following them should never be a type tag.
Instead of having to walk chains we verified previously, we can remember
the last good modifier type ID which headed a good chain. At that point,
we must have verified all other chains headed by type IDs less than it.
This makes the verification process less costly, and it becomes a simple
O(n) pass.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220419164608.1990559-2-memxor@gmail.com
Establish SEC("?abc") naming convention (i.e., adding question mark in
front of otherwise normal section name) that allows to set corresponding
program's autoload property to false. This is effectively just
a declarative way to do bpf_program__set_autoload(prog, false).
Having a way to do this declaratively in BPF code itself is useful and
convenient for various scenarios. E.g., for testing, when BPF object
consists of multiple independent BPF programs that each needs to be
tested separately. Opting out all of them by default and then setting
autoload to true for just one of them at a time simplifies testing code
(see next patch for few conversions in BPF selftests taking advantage of
this new feature).
Another real-world use case is in libbpf-tools for cases when different
BPF programs have to be picked depending on particulars of the host
kernel due to various incompatible changes (like kernel function renames
or signature change, or to pick kprobe vs fentry depending on
corresponding kernel support for the latter). Marking all the different
BPF program candidates as non-autoloaded declaratively makes this more
obvious in BPF source code and allows simpler code in user-space code.
When BPF program marked as SEC("?abc") it is otherwise treated just like
SEC("abc") and bpf_program__section_name() reported will be "abc".
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220419002452.632125-1-andrii@kernel.org
Objtool's function fallthrough detection only works on C objects.
The distinction between C and assembly objects no longer makes sense
with objtool running on vmlinux.o.
Now that copy_user_64.S has been fixed up, and an objtool sibling call
detection bug has been fixed, the asm code is in "compliance" and this
hack is no longer needed. Remove it.
Fixes: ed53a0d971 ("x86/alternative: Use .ibt_endbr_seal to seal indirect calls")
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/b434cff98eca3a60dcc64c620d7d5d405a0f441c.1649718562.git.jpoimboe@redhat.com
In add_jump_destinations(), sibling call detection requires 'insn->func'
to be valid. But alternative instructions get their 'func' set in
handle_group_alt(), which runs *after* add_jump_destinations(). So
sibling calls in alternatives code don't get properly detected.
Fix that by changing the initialization order: call
add_special_section_alts() *before* add_jump_destinations().
This also means the special case for a missing 'jump_dest' in
add_jump_destinations() can be removed, as it has already been dealt
with.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/c02e0a0a2a4286b5f848d17c77fdcb7e0caf709c.1649718562.git.jpoimboe@redhat.com
When a "!ENDBR" warning is reported for a data section, objtool just
prints the text address of the relocation target twice, without giving
any clues about the location of the original data reference:
vmlinux.o: warning: objtool: dcbnl_netdevice_event()+0x0: .text+0xb64680: data relocation to !ENDBR: dcbnl_netdevice_event+0x0
Instead, print the address of the data reference, in addition to the
address of the relocation target.
vmlinux.o: warning: objtool: dcbnl_nb+0x0: .data..read_mostly+0xe260: data relocation to !ENDBR: dcbnl_netdevice_event+0x0
Fixes: 89bc853eae ("objtool: Find unused ENDBR instructions")
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/762e88d51300e8eaf0f933a5b0feae20ac033bea.1650300597.git.jpoimboe@redhat.com
Apparently GCC can fail to inline a 'static inline' single caller
function:
lib/strnlen_user.o: warning: objtool: strnlen_user()+0x33: call to do_strnlen_user() with UACCESS enabled
lib/strncpy_from_user.o: warning: objtool: strncpy_from_user()+0x33: call to do_strncpy_from_user() with UACCESS enabled
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220408094718.262932488@infradead.org
A crash was observed in the ORC unwinder:
BUG: stack guard page was hit at 000000000dd984a2 (stack is 00000000d1caafca..00000000613712f0)
kernel stack overflow (page fault): 0000 [#1] SMP NOPTI
CPU: 93 PID: 23787 Comm: context_switch1 Not tainted 5.4.145 #1
RIP: 0010:unwind_next_frame
Call Trace:
<NMI>
perf_callchain_kernel
get_perf_callchain
perf_callchain
perf_prepare_sample
perf_event_output_forward
__perf_event_overflow
perf_ibs_handle_irq
perf_ibs_nmi_handler
nmi_handle
default_do_nmi
do_nmi
end_repeat_nmi
This was really two bugs:
1) The perf IBS code passed inconsistent regs to the unwinder.
2) The unwinder didn't handle the bad input gracefully.
Fix the latter bug. The ORC unwinder needs to be immune against bad
inputs. The problem is that stack_access_ok() doesn't recheck the
validity of the full range of registers after switching to the next
valid stack with get_stack_info(). Fix that.
[ jpoimboe: rewrote commit log ]
Signed-off-by: Dmitry Monakhov <dmtrmonakhov@yandex-team.ru>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/1650353656-956624-1-git-send-email-dmtrmonakhov@yandex-team.ru
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
The drivers/pcmcia/pxa2xx_*.c are essentially part of the
board files, but for historic reasons located in drivers/pcmcia.
Move them into the same place as the actual board file to avoid
lots of machine header inclusions.
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The pxa2xx-ac97-lib code is the last driver to use mach/irqs.h
for PXA. Almost everything already passes the interrupt as
a resource, so use it from there.
The one exception is the mxm8x10 machine, which apparently has
a resource-less device. Replacing it with the correct one
enables the driver here as well.
Cc: alsa-devel@alsa-project.org
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
