The buffer objects created by cotables were missing fence reservations.
They are created from vmw_validation_res_validate which makes them miss
the ttm_eu_reserve_buffers which is called from vmw_validation_bo_reserve.
Cotables are the only resources which create a buffer object in the
create callback so make sure the code also reserves the slots.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Co-developed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Fixes: c8d4c18bfb ("dma-buf/drivers: make reserving a shared slot mandatory v4")
Link: https://patchwork.freedesktop.org/patch/msgid/20220422161342.1142584-1-zack@kde.org
The 600M clock in the fabric is not the real reference, replace it with
a 125M clock which is the correct value for the icicle kit. Rename the
msspllclk node to mssrefclk since this is now the input to, not the
output of, the msspll clock. Control of the msspll clock has been moved
into the clock configurator, so add the register range for it to the clk
configurator. Finally, add a new output of the clock config block which
will provide the 1M reference clock for the MTIMER and the rtc.
Fixes: 528a5b1f25 ("riscv: dts: microchip: add new peripherals to icicle kit device tree")
Fixes: 0fa6107eca ("RISC-V: Initial DTS for Microchip ICICLE board")
Reviewed-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220413075835.3354193-10-conor.dooley@microchip.com
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Currently the mpfs clock driver uses a reference clock called the
"msspll", set in the device tree, as the parent for the cpu/axi/ahb
(config) clocks. The frequency of the msspll is determined by the FPGA
bitstream & the bootloader configures the clock to match the bitstream.
The real reference is provided by a 100 or 125 MHz off chip oscillator.
However, the msspll clock is not actually the parent of all clocks on
the system - the reference clock for the rtc/mtimer actually has the
off chip oscillator as its parent.
In order to fix this, add support for reading the configuration of the
msspll & reparent the "config" clocks so that they are derived from
this clock rather than the reference in the device tree.
Fixes: 635e5e7337 ("clk: microchip: Add driver for Microchip PolarFire SoC")
Reviewed-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220413075835.3354193-8-conor.dooley@microchip.com
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The fic clocks passed to the pcie controller and other peripherals in
the device tree are not the clocks they actually run on. The fics are
actually clock domain crossers & the clock config blocks output is the
mss/cpu side input to the interconnect. The peripherals are actually
clocked by fixed frequency clocks embedded in the fpga fabric.
Fix the device tree so that these peripherals use the correct clocks.
The fabric side FIC0 & FIC1 inputs both use the same 125 MHz, so only
one clock is created for them.
Fixes: 528a5b1f25 ("riscv: dts: microchip: add new peripherals to icicle kit device tree")
Reviewed-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220413075835.3354193-4-conor.dooley@microchip.com
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Pull ext4 fixes from Ted Ts'o:
"Fix some syzbot-detected bugs, as well as other bugs found by I/O
injection testing.
Change ext4's fallocate to consistently drop set[ug]id bits when an
fallocate operation might possibly change the user-visible contents of
a file.
Also, improve handling of potentially invalid values in the the
s_overhead_cluster superblock field to avoid ext4 returning a negative
number of free blocks"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
jbd2: fix a potential race while discarding reserved buffers after an abort
ext4: update the cached overhead value in the superblock
ext4: force overhead calculation if the s_overhead_cluster makes no sense
ext4: fix overhead calculation to account for the reserved gdt blocks
ext4, doc: fix incorrect h_reserved size
ext4: limit length to bitmap_maxbytes - blocksize in punch_hole
ext4: fix use-after-free in ext4_search_dir
ext4: fix bug_on in start_this_handle during umount filesystem
ext4: fix symlink file size not match to file content
ext4: fix fallocate to use file_modified to update permissions consistently
Pull ATA fix from Damien Le Moal:
"A single fix to avoid a NULL pointer dereference in the pata_marvell
driver with adapters not supporting DMA, from Zheyu"
* tag 'ata-5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: pata_marvell: Check the 'bmdma_addr' beforing reading
Pull kvm fixes from Paolo Bonzini:
"The main and larger change here is a workaround for AMD's lack of
cache coherency for encrypted-memory guests.
I have another patch pending, but it's waiting for review from the
architecture maintainers.
RISC-V:
- Remove 's' & 'u' as valid ISA extension
- Do not allow disabling the base extensions 'i'/'m'/'a'/'c'
x86:
- Fix NMI watchdog in guests on AMD
- Fix for SEV cache incoherency issues
- Don't re-acquire SRCU lock in complete_emulated_io()
- Avoid NULL pointer deref if VM creation fails
- Fix race conditions between APICv disabling and vCPU creation
- Bugfixes for disabling of APICv
- Preserve BSP MSR_KVM_POLL_CONTROL across suspend/resume
selftests:
- Do not use bitfields larger than 32-bits, they differ between GCC
and clang"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: selftests: introduce and use more page size-related constants
kvm: selftests: do not use bitfields larger than 32-bits for PTEs
KVM: SEV: add cache flush to solve SEV cache incoherency issues
KVM: SVM: Flush when freeing encrypted pages even on SME_COHERENT CPUs
KVM: SVM: Simplify and harden helper to flush SEV guest page(s)
KVM: selftests: Silence compiler warning in the kvm_page_table_test
KVM: x86/pmu: Update AMD PMC sample period to fix guest NMI-watchdog
x86/kvm: Preserve BSP MSR_KVM_POLL_CONTROL across suspend/resume
KVM: SPDX style and spelling fixes
KVM: x86: Skip KVM_GUESTDBG_BLOCKIRQ APICv update if APICv is disabled
KVM: x86: Pend KVM_REQ_APICV_UPDATE during vCPU creation to fix a race
KVM: nVMX: Defer APICv updates while L2 is active until L1 is active
KVM: x86: Tag APICv DISABLE inhibit, not ABSENT, if APICv is disabled
KVM: Initialize debugfs_dentry when a VM is created to avoid NULL deref
KVM: Add helpers to wrap vcpu->srcu_idx and yell if it's abused
KVM: RISC-V: Use kvm_vcpu.srcu_idx, drop RISC-V's unnecessary copy
KVM: x86: Don't re-acquire SRCU lock in complete_emulated_io()
RISC-V: KVM: Restrict the extensions that can be disabled
RISC-V: KVM: Remove 's' & 'u' as valid ISA extension
I made a mistake with the commit a6aaa00324 ("net: ethernet: stmmac:
fix altr_tse_pcs function when using a fixed-link"). I should have
tested against both scenario of having a SGMII interface and one
without.
Without the SGMII PCS TSE adpater, the sgmii_adapter_base address is
NULL, thus a write to this address will fail.
Cc: stable@vger.kernel.org
Fixes: a6aaa00324 ("net: ethernet: stmmac: fix altr_tse_pcs function when using a fixed-link")
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20220420152345.27415-1-dinguyen@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Arun Ramadoss says:
====================
add ethtool SQI support for LAN87xx T1 Phy
This patch series add the Signal Quality Index measurement for the LAN87xx and
LAN937x T1 phy. Updated the maintainers file for microchip_t1.c.
====================
Link: https://lore.kernel.org/r/20220420152016.9680-1-arun.ramadoss@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch add the support for measuring Signal Quality Index for
LAN87xx and LAN937x T1 Phy. It uses the SQI Method 5 for obtaining the
values.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Add two PCI IDs and quirks for APL Chromebooks and Intel IPC4
selection for developers.
cppcheck throws the following warning:
sound/soc/soc-core.c:2773:6: style: Condition '!num_widgets' is always
false [knownConditionTrueFalse]
if (!num_widgets) {
^
sound/soc/soc-core.c:2761:18: note: Assuming that condition
'num_widgets<0' is not redundant
if (num_widgets < 0) {
^
sound/soc/soc-core.c:2766:18: note: Assuming condition is false
if (num_widgets & 1) {
^
sound/soc/soc-core.c:2772:2: note: Compound assignment '/=', assigned
value is 0
num_widgets /= 2;
^
We should check upfront all error conditions.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220421162505.302132-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some boards like the AM335x EVM-SK and AM437x GP EVM provide software
control via a GPIO pin to toggle the DDR VTT regulator to reduce power
consumption in low power states.
The VTT regulator should be disabled after enabling self-refresh on
suspend, and should be enabled before disabling self-refresh on resume.
This is to allow proper self-refresh entry/exit commands to be
transmitted to the memory.
The "ti,vtt-gpio-pin" device tree property in the wkup_m3_ipc node
specifies which GPIO pin to use. This property is communicated to the
Wakeup Cortex M3 co-processor where the actual toggling of the GPIO pin
happens in CM3 firmware [1].
Please note that the GPIO pin must be on the GPIO0 module as that module
is in the wakeup power domain.
[1] https://git.ti.com/cgit/processor-firmware/ti-amx3-cm3-pm-firmware/tree/src/pm_services/ddr.c?h=08.02.00.006#n190
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
[dfustini: remove the unnecessary "ti,needs-vtt-toggle" property]
Signed-off-by: Drew Fustini <dfustini@baylibre.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20220409211215.2529387-3-dfustini@baylibre.com
Payload sizes for mailbox commands are expected to be positive values
coming from userspace. The documentation correctly describes these as
always unsigned values. The mailbox and send structures that support
the mailbox commands however, use __s32 types for the payloads.
Replace __s32 with __u32 in the mailbox and send command structures
and update usages.
Kernel users of the interface already block all negative values and
there is no known ability for userspace to have grown a dependency on
submitting negative values to the kernel. The known user of the IOCTL,
the CXL command line interface (cxl-cli) already enforces positive
size values.
A Smatch warning of a signedness uncovered this issue.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/20220414051246.1244575-1-alison.schofield@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The CXL specification claims S3 support at a hardware level, but at a
system software level there are some missing pieces. Section 9.4 (CXL
2.0) rightly claims that "CXL mem adapters may need aux power to retain
memory context across S3", but there is no enumeration mechanism for the
OS to determine if a given adapter has that support. Moreover the save
state and resume image for the system may inadvertantly end up in a CXL
device that needs to be restored before the save state is recoverable.
I.e. a circular dependency that is not resolvable without a third party
save-area.
Arrange for the cxl_mem driver to fail S3 attempts. This still nominaly
allows for suspend, but requires unbinding all CXL memory devices before
the suspend to ensure the typical DRAM flow is taken. The cxl_mem unbind
flow is intended to also tear down all CXL memory regions associated
with a given cxl_memdev.
It is reasonable to assume that any device participating in a System RAM
range published in the EFI memory map is covered by aux power and
save-area outside the device itself. So this restriction can be
minimized in the future once pre-existing region enumeration support
arrives, and perhaps a spec update to clarify if the EFI memory map is
sufficent for determining the range of devices managed by
platform-firmware for S3 support.
Per Rafael, if the CXL configuration prevents suspend then it should
fail early before tasks are frozen, and mem_sleep should stop showing
'mem' as an option [1]. Effectively CXL augments the platform suspend
->valid() op since, for example, the ACPI ops are not aware of the CXL /
PCI dependencies. Given the split role of platform firmware vs OS
provisioned CXL memory it is up to the cxl_mem driver to determine if
the CXL configuration has elements that platform firmware may not be
prepared to restore.
Link: https://lore.kernel.org/r/CAJZ5v0hGVN_=3iU8OLpHY3Ak35T5+JcBM-qs8SbojKrpd0VXsA@mail.gmail.com [1]
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Len Brown <len.brown@intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/165066828317.3907920.5690432272182042556.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Jason A. Donenfeld says:
====================
wireguard patches for 5.18-rc4
Here are two small wireguard fixes for 5.18-rc4:
1) We enable ACPI in the QEMU test harness, so that multiple CPUs are
actually used on x86 for testing for races.
2) Sending skbs with metadata dsts attached resulted in a null pointer
dereference, triggerable from executing eBPF programs. The fix is a
oneliner, changing a skb_dst() null check into a skb_valid_dst()
boolean check.
====================
Link: https://lore.kernel.org/r/20220421134805.279118-1-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It turns out that by having CONFIG_ACPI=n, we've been failing to boot
additional CPUs, and so these systems were functionally UP. The code
bloat is unfortunate for build times, but I don't see an alternative. So
this commit sets CONFIG_ACPI=y for x86_64 and i686 configs.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
types_info->ini_files is an array of pointers
to struct mlxsw_linecard_ini_file.
Fix the kmalloc_array() argument to be of a size of a pointer.
Addresses-Coverity: ("Incorrect expression (SIZEOF_MISMATCH)")
Fixes: b217127e5e ("mlxsw: core_linecards: Add line card objects and implement provisioning")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20220420142007.3041173-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Teach bpf_link_create() to fallback to bpf_raw_tracepoint_open() on
older kernels for programs that are attachable through
BPF_RAW_TRACEPOINT_OPEN. This makes bpf_link_create() more unified and
convenient interface for creating bpf_link-based attachments.
With this approach end users can just use bpf_link_create() for
tp_btf/fentry/fexit/fmod_ret/lsm program attachments without needing to
care about kernel support, as libbpf will handle this transparently. On
the other hand, as newer features (like BPF cookie) are added to
LINK_CREATE interface, they will be readily usable though the same
bpf_link_create() API without any major refactoring from user's
standpoint.
bpf_program__attach_btf_id() is now using bpf_link_create() internally
as well and will take advantaged of this unified interface when BPF
cookie is added for fentry/fexit.
Doing proactive feature detection of LINK_CREATE support for
fentry/tp_btf/etc is quite involved. It requires parsing vmlinux BTF,
determining some stable and guaranteed to be in all kernels versions
target BTF type (either raw tracepoint or fentry target function),
actually attaching this program and thus potentially affecting the
performance of the host kernel briefly, etc. So instead we are taking
much simpler "lazy" approach of falling back to
bpf_raw_tracepoint_open() call only if initial LINK_CREATE command
fails. For modern kernels this will mean zero added overhead, while
older kernels will incur minimal overhead with a single fast-failing
LINK_CREATE call.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Kui-Feng Lee <kuifeng@fb.com>
Link: https://lore.kernel.org/bpf/20220421033945.3602803-3-andrii@kernel.org
Allow attaching BTF-aware TRACING programs, previously attachable only
through BPF_RAW_TRACEPOINT_OPEN command, through LINK_CREATE command:
- BTF-aware raw tracepoints (tp_btf in libbpf lingo);
- fentry/fexit/fmod_ret programs;
- BPF LSM programs.
This change converges all bpf_link-based attachments under LINK_CREATE
command allowing to further extend the API with features like BPF cookie
under "multiplexed" link_create section of bpf_attr.
Non-BTF-aware raw tracepoints are left under BPF_RAW_TRACEPOINT_OPEN,
but there is nothing preventing opening them up to LINK_CREATE as well.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Kuifeng Lee <kuifeng@fb.com>
Link: https://lore.kernel.org/bpf/20220421033945.3602803-2-andrii@kernel.org
If an ACK (s)acks multiple skbs, we favor the information
from the most recently sent skb by choosing the skb with
the highest prior_delivered count. But in the interval
between receiving ACKs, we send multiple skbs with the same
prior_delivered, because the tp->delivered only changes
when we receive an ACK.
We used RACK's solution, copying tcp_rack_sent_after() as
tcp_skb_sent_after() helper to determine "which packet was
sent last?". Later, we will use tcp_skb_sent_after() instead
in RACK.
Fixes: b9f64820fb ("tcp: track data delivery rate for a TCP connection")
Signed-off-by: Pengcheng Yang <yangpc@wangsu.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Tested-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/1650422081-22153-1-git-send-email-yangpc@wangsu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current EOI handler for LEVEL triggered interrupts calls clk_enable(),
register IO, clk_disable(). The clock manipulation requires locking which
happens with IRQs disabled in clk_enable_lock(). Instead of turning the
clock on and off all the time, enable the clock in case LEVEL interrupt is
requested and keep the clock enabled until all LEVEL interrupts are freed.
The LEVEL interrupts are an exception on this platform and seldom used, so
this does not affect the common case.
This simplifies the LEVEL interrupt handling considerably and also fixes
the following splat found when using preempt-rt:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at kernel/locking/rtmutex.c:2040 __rt_mutex_trylock+0x37/0x62
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.109-rt65-stable-standard-00068-g6a5afc4b1217 #85
Hardware name: STM32 (Device Tree Support)
[<c010a45d>] (unwind_backtrace) from [<c010766f>] (show_stack+0xb/0xc)
[<c010766f>] (show_stack) from [<c06353ab>] (dump_stack+0x6f/0x84)
[<c06353ab>] (dump_stack) from [<c01145e3>] (__warn+0x7f/0xa4)
[<c01145e3>] (__warn) from [<c063386f>] (warn_slowpath_fmt+0x3b/0x74)
[<c063386f>] (warn_slowpath_fmt) from [<c063b43d>] (__rt_mutex_trylock+0x37/0x62)
[<c063b43d>] (__rt_mutex_trylock) from [<c063c053>] (rt_spin_trylock+0x7/0x16)
[<c063c053>] (rt_spin_trylock) from [<c036a2f3>] (clk_enable_lock+0xb/0x80)
[<c036a2f3>] (clk_enable_lock) from [<c036ba69>] (clk_core_enable_lock+0x9/0x18)
[<c036ba69>] (clk_core_enable_lock) from [<c034e9f3>] (stm32_gpio_get+0x11/0x24)
[<c034e9f3>] (stm32_gpio_get) from [<c034ef43>] (stm32_gpio_irq_trigger+0x1f/0x48)
[<c034ef43>] (stm32_gpio_irq_trigger) from [<c014aa53>] (handle_fasteoi_irq+0x71/0xa8)
[<c014aa53>] (handle_fasteoi_irq) from [<c0147111>] (generic_handle_irq+0x19/0x22)
[<c0147111>] (generic_handle_irq) from [<c014752d>] (__handle_domain_irq+0x55/0x64)
[<c014752d>] (__handle_domain_irq) from [<c0346f13>] (gic_handle_irq+0x53/0x64)
[<c0346f13>] (gic_handle_irq) from [<c0100ba5>] (__irq_svc+0x65/0xc0)
Exception stack(0xc0e01f18 to 0xc0e01f60)
1f00: 0000300c 00000000
1f20: 0000300c c010ff01 00000000 00000000 c0e00000 c0e07714 00000001 c0e01f78
1f40: c0e07758 00000000 ef7cd0ff c0e01f68 c010554b c0105542 40000033 ffffffff
[<c0100ba5>] (__irq_svc) from [<c0105542>] (arch_cpu_idle+0xc/0x1e)
[<c0105542>] (arch_cpu_idle) from [<c063be95>] (default_idle_call+0x21/0x3c)
[<c063be95>] (default_idle_call) from [<c01324f7>] (do_idle+0xe3/0x1e4)
[<c01324f7>] (do_idle) from [<c01327b3>] (cpu_startup_entry+0x13/0x14)
[<c01327b3>] (cpu_startup_entry) from [<c0a00c13>] (start_kernel+0x397/0x3d4)
[<c0a00c13>] (start_kernel) from [<00000000>] (0x0)
---[ end trace 0000000000000002 ]---
Power consumption measured on STM32MP157C DHCOM SoM is not increased or
is below noise threshold.
Fixes: 47beed513a ("pinctrl: stm32: Add level interrupt support to gpio irq chip")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Fabien Dessenne <fabien.dessenne@foss.st.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
To: linux-gpio@vger.kernel.org
Reviewed-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
Link: https://lore.kernel.org/r/20220421140827.214088-1-marex@denx.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
