The feature of minimizing overhead of struct page associated with each
HugeTLB page aims to free its vmemmap pages (used as struct page) to save
memory, where is ~14GB/16GB per 1TB HugeTLB pages (2MB/1GB type). In
short, when a HugeTLB page is allocated or freed, the vmemmap array
representing the range associated with the page will need to be remapped.
When a page is allocated, vmemmap pages are freed after remapping. When a
page is freed, previously discarded vmemmap pages must be allocated before
remapping. More implementations and details can be found here [1].
The infrastructure of freeing vmemmap pages associated with each HugeTLB
page is already there, we can easily enable HUGETLB_PAGE_FREE_VMEMMAP for
arm64, the only thing to be fixed is flush_dcache_page() .
flush_dcache_page() need to be adapted to operate on the head page's flags
since the tail vmemmap pages are mapped with read-only after the feature
is enabled (clear operation is not permitted).
There was some discussions about this in the thread [2], but there was no
conclusion in the end. And I copied the concern proposed by Anshuman to
here and explain why those concern is superfluous. It is safe to enable
it for x86_64 as well as arm64.
1st concern:
'''
But what happens when a hot remove section's vmemmap area (which is
being teared down) is nearby another vmemmap area which is either created
or being destroyed for HugeTLB alloc/free purpose. As you mentioned
HugeTLB pages inside the hot remove section might be safe. But what about
other HugeTLB areas whose vmemmap area shares page table entries with
vmemmap entries for a section being hot removed ? Massive HugeTLB alloc
/use/free test cycle using memory just adjacent to a memory hotplug area,
which is always added and removed periodically, should be able to expose
this problem.
'''
Answer: At the time memory is removed, all HugeTLB pages either have been
migrated away or dissolved. So there is no race between memory hot remove
and free_huge_page_vmemmap(). Therefore, HugeTLB pages inside the hot
remove section is safe. Let's talk your question "what about other
HugeTLB areas whose vmemmap area shares page table entries with vmemmap
entries for a section being hot removed ?", the question is not
established. The minimal granularity size of hotplug memory 128MB (on
arm64, 4k base page), any HugeTLB smaller than 128MB is within a section,
then, there is no share PTE page tables between HugeTLB in this section
and ones in other sections and a HugeTLB page could not cross two
sections. In this case, the section cannot be freed. Any HugeTLB bigger
than 128MB (section size) whose vmemmap pages is an integer multiple of
2MB (PMD-mapped). As long as:
1) HugeTLBs are naturally aligned, power-of-two sizes
2) The HugeTLB size >= the section size
3) The HugeTLB size >= the vmemmap leaf mapping size
Then a HugeTLB will not share any leaf page table entries with *anything
else*, but will share intermediate entries. In this case, at the time
memory is removed, all HugeTLB pages either have been migrated away or
dissolved. So there is also no race between memory hot remove and
free_huge_page_vmemmap().
2nd concern:
'''
differently, not sure if ptdump would require any synchronization.
Dumping an wrong value is probably okay but crashing because a page table
entry is being freed after ptdump acquired the pointer is bad. On arm64,
ptdump() is protected against hotremove via [get|put]_online_mems().
'''
Answer: The ptdump should be fine since vmemmap_remap_free() only
exchanges PTEs or splits the PMD entry (which means allocating a PTE page
table). Both operations do not free any page tables (PTE), so ptdump
cannot run into a UAF on any page tables. The worst case is just dumping
an wrong value.
[1] https://lore.kernel.org/all/20210510030027.56044-1-songmuchun@bytedance.com/
[2] https://lore.kernel.org/all/20210518091826.36937-1-songmuchun@bytedance.com/
[songmuchun@bytedance.com: restructure the code comment inside flush_dcache_page()]
Link: https://lkml.kernel.org/r/20220414072646.21910-1-songmuchun@bytedance.com
Link: https://lkml.kernel.org/r/20220331065640.5777-2-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Barry Song <baohua@kernel.org>
Tested-by: Barry Song <baohua@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Bodeddula Balasubramaniam <bodeddub@amazon.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
vmap() takes struct page *pages as one of arguments, and user may provide
an invalid pointer which may lead to corrupted translation table.
An example of such behaviour is erroneous usage of virt_to_page():
vaddr1 = dma_alloc_coherent()
page = virt_to_page() // Wrong here
...
vaddr2 = vmap(page)
memset(vaddr2) // Faulting here
virt_to_page() returns a wrong pointer if vaddr1 is not a linear kernel
address. The problem is that vmap() populates pte with bad pfn
successfully, and it's much harder to debug at memory access time. This
case should be caught by DEBUG_VIRTUAL being that enabled, but it's not
enabled in popular distros.
Kernel already checks the pages against NULL. In the case mentioned
above, however, the address is not NULL, and it's big enough so that the
hardware generated Address Size Abort on arm64:
[ 665.484101] Unhandled fault at 0xffff8000252cd000
[ 665.488807] Mem abort info:
[ 665.491617] ESR = 0x96000043
[ 665.494675] EC = 0x25: DABT (current EL), IL = 32 bits
[ 665.499985] SET = 0, FnV = 0
[ 665.503039] EA = 0, S1PTW = 0
[ 665.506167] Data abort info:
[ 665.509047] ISV = 0, ISS = 0x00000043
[ 665.512882] CM = 0, WnR = 1
[ 665.515851] swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000000818cb000
[ 665.522550] [ffff8000252cd000] pgd=000000affcfff003, pud=000000affcffe003, pmd=0000008fad8c3003, pte=00688000a5217713
[ 665.533160] Internal error: level 3 address size fault: 96000043 [#1] SMP
[ 665.539936] Modules linked in: [...]
[ 665.616212] CPU: 178 PID: 13199 Comm: test Tainted: P OE 5.4.0-84-generic #94~18.04.1-Ubuntu
[ 665.626806] Hardware name: HPE Apollo 70 /C01_APACHE_MB , BIOS L50_5.13_1.0.6 07/10/2018
[ 665.636618] pstate: 80400009 (Nzcv daif +PAN -UAO)
[ 665.641407] pc : __memset+0x38/0x188
[ 665.645146] lr : test+0xcc/0x3f8
[ 665.650184] sp : ffff8000359bb840
[ 665.653486] x29: ffff8000359bb840 x28: 0000000000000000
[ 665.658785] x27: 0000000000000000 x26: 0000000000231000
[ 665.664083] x25: ffff00ae660f6110 x24: ffff00ae668cb800
[ 665.669382] x23: 0000000000000001 x22: ffff00af533e5000
[ 665.674680] x21: 0000000000001000 x20: 0000000000000000
[ 665.679978] x19: ffff00ae66950000 x18: ffffffffffffffff
[ 665.685276] x17: 00000000588636a5 x16: 0000000000000013
[ 665.690574] x15: ffffffffffffffff x14: 000000000007ffff
[ 665.695872] x13: 0000000080000000 x12: 0140000000000000
[ 665.701170] x11: 0000000000000041 x10: ffff8000652cd000
[ 665.706468] x9 : ffff8000252cf000 x8 : ffff8000252cd000
[ 665.711767] x7 : 0303030303030303 x6 : 0000000000001000
[ 665.717065] x5 : ffff8000252cd000 x4 : 0000000000000000
[ 665.722363] x3 : ffff8000252cdfff x2 : 0000000000000001
[ 665.727661] x1 : 0000000000000003 x0 : ffff8000252cd000
[ 665.732960] Call trace:
[ 665.735395] __memset+0x38/0x188
[...]
Interestingly, this abort happens even if copy_from_kernel_nofault() is
used, which is quite inconvenient for debugging purposes.
This patch adds a pfn_valid() check into vmap() path, so that invalid
mapping will not be created; WARN_ON() is used to let client code know
that something goes wrong, and it's not a regular EINVAL situation.
Link: https://lkml.kernel.org/r/20220422220410.1308706-1-yury.norov@gmail.com
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Suggested-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Alexey Klimov <aklimov@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ding Tianhong <dingtianhong@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
After commit 0e4b01df86 ("mm, memcg: throttle allocators when failing
reclaim over memory.high") allocating memory over memory.high became very
time consuming. But it's exactly what the memory.high test from cgroup
kselftests is doing: it tries to allocate 100M with 30M memory.high value.
It takes forever to complete.
In order to keep it passing (or failing) in a reasonable amount of time
let's try to allocate only a little over 30M: 31M to be precise.
With this change test_memcontrol finishes in a reasonable amount of
time:
$ time ./test_memcontrol
ok 1 test_memcg_subtree_control
ok 2 test_memcg_current
ok 3 test_memcg_min
ok 4 test_memcg_low
ok 5 test_memcg_high
ok 6 test_memcg_max
ok 7 test_memcg_oom_events
ok 8 test_memcg_swap_max
ok 9 test_memcg_sock
ok 10 test_memcg_oom_group_leaf_events
ok 11 test_memcg_oom_group_parent_events
ok 12 test_memcg_oom_group_score_events
real 0m2.273s
user 0m0.064s
sys 0m0.739s
Link: https://lkml.kernel.org/r/20220415000133.3955987-3-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Reviewed-by: David Vernet <void@manifault.com>
Cc: Chris Down <chris@chrisdown.name>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
An application is suspected of having memory leak when its memory
consumption is high and keeps increasing. There are several commonly used
memory allocators: slab, cma, vmalloc, etc. The memory leak
identification can be sped up if the page information allocated by an
allocator can be analyzed separately.
This patch provides supports for memory allocator labelling for slab,
vmalloc, and cma. The pages allocated by slab and cma can be confirmed
from the "PFN" line according to the kernel codes, and the label of the
vmalloc allocator can be obtained by analyzing the stack trace. Thanks
for Vlastimil Babka's constructive suggestions.
Based on Yinan Zhang's study, the call chain of vmalloc() is vmalloc() ->
... -> __vmalloc_node_range() -> __vmalloc_area_node().
__vmalloc_area_node() requests memory through the interface of buddy
allocation system. In the current version, __vmalloc_area_node() uses
four interfaces: alloc_pages_bulk_array_mempolicy(),
alloc_pages_bulk_array_node(), alloc_pages() and alloc_pages_node(). By
disassembling the code, we find that __vmalloc_area_node() is expanded in
__vmalloc_node_range(). So __vmalloc_area_node is not in the stack trace.
On the test machine, the stack trace of pages allocated by vmalloc has the
following four forms:
__alloc_pages_bulk+0x230/0x6a0
__vmalloc_node_range+0x19c/0x598
alloc_pages_bulk_array_mempolicy+0xbc/0x278
__vmalloc_node_range+0x1e8/0x598
__alloc_pages+0x160/0x2b0
__vmalloc_node_range+0x234/0x598
alloc_pages+0xac/0x150
__vmalloc_node_range+0x44c/0x598
Therefore, in two consecutive lines of stacktrace, if the first line
contains the word "alloc_pages" and the second line contains the word
"__vmalloc_node_range", it can be determined that the page is allocated by
vmalloc. And the function offset and size are not the same on different
machines, so there is no need to match them.
At the same time, this patch updates the --cull and --sort options to
support allocator-based merge statistics and sorting. The added functions
are fully compatible with the original work. When using, you can use
"allocator", or abbreviated as "ator". Relevant updates have also been
made in the documentation(Documentation/vm/page_owner.rst).
Example:
./page_owner_sort <input> <output> --cull=st,pid,name,allocator
./page_owner_sort <input> <output> --sort=ator,pid,name
This work is coauthored by Jiajian Ye, Yinan Zhang, Shenghong Han,
Chongxi Zhao, Yuhong Feng and Yongqiang Liu.
Link: https://lkml.kernel.org/r/20220410132932.9402-1-caoyixuan2019@email.szu.edu.cn
Signed-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn>
Cc: Haowen Bai <baihaowen@meizu.com>
Cc: Jiajian Ye <yejiajian2018@email.szu.edu.cn>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn>
Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn>
Cc: Yongqiang Liu <liuyongqiang13@huawei.com>
Cc: Yuhong Feng <yuhongf@szu.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When viewing page owner information, we may want to sort blocks of
information by multiple keys, since one single key does not uniquely
identify a block. Therefore, following adjustments are made:
1. Add a new --sort option to support sorting blocks of information by
multiple keys.
./page_owner_sort <input> <output> --sort=<order>
./page_owner_sort <input> <output> --sort <order>
<order> is a single argument in the form of a comma-separated list,
which offers a way to specify sorting order.
Sorting syntax is [+|-]key[,[+|-]key[,...]]. The ascending or descending
order can be specified by adding the + (ascending, default) or - (descend
-ing) prefix to the key:
./page_owner_sort <input> <output> [option] --sort -key1,+key2,key3...
For example, to sort the blocks first by task command name in lexicographic
order and then by pid in ascending numerical order, use the following:
./page_owner_sort <input> <output> --sort=name,+pid
To sort the blocks first by pid in ascending order and then by timestamp
of the page when it is allocated in descending order, use the following:
./page_owner_sort <input> <output> --sort=pid,-alloc_ts
2. Add explanations of a newly added --sort option in the function usage()
and the document(Documentation/vm/page_owner.rst).
This work is coauthored by
Yixuan Cao
Shenghong Han
Yinan Zhang
Chongxi Zhao
Yuhong Feng
Yongqiang Liu
Link: https://lkml.kernel.org/r/20220401024856.767-3-yejiajian2018@email.szu.edu.cn
Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn>
Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn>
Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn>
Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn>
Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Cc: Yongqiang Liu <liuyongqiang13@huawei.com>
Cc: Yuhong Feng <yuhongf@szu.edu.cn>
Cc: Haowen Bai <baihaowen@meizu.com>
Cc: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When viewing page owner information, we may want to select blocks whose
PID/TGID/TASK_COMM_NAME appears in a user-specified list for data analysis
and aggregation. But currently page_owner_sort only supports selecting
blocks associated with only one specified PID/TGID/TASK_COMM_NAME.
Therefore, following adjustments are made to fix the problem:
1. Enhance selecting function to support the selection of multiple
PIDs/TGIDs/TASK_COMM_NAMEs.
The enhanced usages are as follows:
--pid <pidlist> Select by pid. This selects the blocks whose PID
numbers appear in <pidlist>.
--tgid <tgidlist> Select by tgid. This selects the blocks whose
TGID numbers appear in <tgidlist>.
--name <cmdlist> Select by task command name. This selects the
blocks whose task command name appear in <cmdlist>.
Where <pidlist>, <tgidlist>, <cmdlist> are single arguments in the form of
a comma-separated list,which offers a way to specify individual selecting
rules.
For example, if you want to select blocks whose tgids are 1, 2 or 3, you
have to use 4 commands as follows:
./page_owner_sort <input> <output1> --tgid=1
./page_owner_sort <input> <output2> --tgid=2
./page_owner_sort <input> <output3> --tgid=3
cat <output1> <output2> <output3> > <output>
With this patch, you can use only 1 command to obtain the same result as
above:
./page_owner_sort <input> <output1> --tgid=1,2,3
2. Update explanations of --pid, --tgid and --name in the function
usage() and the document(Documents/vm/page_owner.rst).
This work is coauthored by
Yixuan Cao
Shenghong Han
Yinan Zhang
Chongxi Zhao
Yuhong Feng
Yongqiang Liu
Link: https://lkml.kernel.org/r/20220401024856.767-2-yejiajian2018@email.szu.edu.cn
Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn>
Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn>
Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn>
Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn>
Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Cc: Yongqiang Liu <liuyongqiang13@huawei.com>
Cc: Yuhong Feng <yuhongf@szu.edu.cn>
Cc: Haowen Bai <baihaowen@meizu.com>
Cc: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/memory-failure: rework fix on huge_zero_page splitting".
This patch (of 2):
This reverts commit d173d5417f.
The commit d173d5417f ("mm/memory-failure.c: skip huge_zero_page in
memory_failure()") explicitly skips huge_zero_page in memory_failure(), in
order to avoid triggering VM_BUG_ON_PAGE on huge_zero_page in
split_huge_page_to_list().
This works, but Yang Shi thinks that,
Raising BUG is overkilling for splitting huge_zero_page. The
huge_zero_page can't be met from normal paths other than memory
failure, but memory failure is a valid caller. So I tend to replace
the BUG to WARN + returning -EBUSY. If we don't care about the
reason code in memory failure, we don't have to touch memory
failure.
And for the issue that huge_zero_page will be set PG_has_hwpoisoned,
Yang Shi comments that,
The anonymous page fault doesn't check if the page is poisoned or
not since it typically gets a fresh allocated page and assumes the
poisoned page (isolated successfully) can't be reallocated again.
But huge zero page and base zero page are reused every time. So no
matter what fix we pick, the issue is always there.
Finally, Yang, David, Anshuman and Naoya all agree to fix the bug, i.e.,
to split huge_zero_page, in split_huge_page_to_list().
This reverts the commit d173d5417f ("mm/memory-failure.c: skip
huge_zero_page in memory_failure()"), and the original bug will be fixed
by the next patch.
Link: https://lkml.kernel.org/r/872cefb182ba1dd686b0e7db1e6b2ebe5a4fff87.1651039624.git.xuyu@linux.alibaba.com
Fixes: d173d5417f ("mm/memory-failure.c: skip huge_zero_page in memory_failure()")
Fixes: 6a46079cf5 ("HWPOISON: The high level memory error handler in the VM v7")
Signed-off-by: Xu Yu <xuyu@linux.alibaba.com>
Suggested-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Double free crash is observed when FW recovery(caused by wmi
timeout/crash) is followed by immediate suspend event. The FW recovery
is triggered by ath10k_core_restart() which calls driver clean up via
ath10k_halt(). When the suspend event occurs between the FW recovery,
the restart worker thread is put into frozen state until suspend completes.
The suspend event triggers ath10k_stop() which again triggers ath10k_halt()
The double invocation of ath10k_halt() causes ath10k_htt_rx_free() to be
called twice(Note: ath10k_htt_rx_alloc was not called by restart worker
thread because of its frozen state), causing the crash.
To fix this, during the suspend flow, skip call to ath10k_halt() in
ath10k_stop() when the current driver state is ATH10K_STATE_RESTARTING.
Also, for driver state ATH10K_STATE_RESTARTING, call
ath10k_wait_for_suspend() in ath10k_stop(). This is because call to
ath10k_wait_for_suspend() is skipped later in
[ath10k_halt() > ath10k_core_stop()] for the driver state
ATH10K_STATE_RESTARTING.
The frozen restart worker thread will be cancelled during resume when the
device comes out of suspend.
Below is the crash stack for reference:
[ 428.469167] ------------[ cut here ]------------
[ 428.469180] kernel BUG at mm/slub.c:4150!
[ 428.469193] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[ 428.469219] Workqueue: events_unbound async_run_entry_fn
[ 428.469230] RIP: 0010:kfree+0x319/0x31b
[ 428.469241] RSP: 0018:ffffa1fac015fc30 EFLAGS: 00010246
[ 428.469247] RAX: ffffedb10419d108 RBX: ffff8c05262b0000
[ 428.469252] RDX: ffff8c04a8c07000 RSI: 0000000000000000
[ 428.469256] RBP: ffffa1fac015fc78 R08: 0000000000000000
[ 428.469276] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 428.469285] Call Trace:
[ 428.469295] ? dma_free_attrs+0x5f/0x7d
[ 428.469320] ath10k_core_stop+0x5b/0x6f
[ 428.469336] ath10k_halt+0x126/0x177
[ 428.469352] ath10k_stop+0x41/0x7e
[ 428.469387] drv_stop+0x88/0x10e
[ 428.469410] __ieee80211_suspend+0x297/0x411
[ 428.469441] rdev_suspend+0x6e/0xd0
[ 428.469462] wiphy_suspend+0xb1/0x105
[ 428.469483] ? name_show+0x2d/0x2d
[ 428.469490] dpm_run_callback+0x8c/0x126
[ 428.469511] ? name_show+0x2d/0x2d
[ 428.469517] __device_suspend+0x2e7/0x41b
[ 428.469523] async_suspend+0x1f/0x93
[ 428.469529] async_run_entry_fn+0x3d/0xd1
[ 428.469535] process_one_work+0x1b1/0x329
[ 428.469541] worker_thread+0x213/0x372
[ 428.469547] kthread+0x150/0x15f
[ 428.469552] ? pr_cont_work+0x58/0x58
[ 428.469558] ? kthread_blkcg+0x31/0x31
Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00288-QCARMSWPZ-1
Co-developed-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Abhishek Kumar <kuabhs@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220426221859.v2.1.I650b809482e1af8d0156ed88b5dc2677a0711d46@changeid
(cherry picked from commit 1f682dc9fb in wireless-next)
Currently ath11k will wait 11d scan complete while add interface in
ath11k_mac_op_add_interface(), when system resume without enable
wowlan, ath11k_mac_op_add_interface() is called for each resume, thus
it increase the resume time of system. And ath11k_mac_op_hw_scan()
after ath11k_mac_op_add_interface() also needs some time cost because
the previous 11d scan need more than 5 seconds when 6 GHz is enabled,
then the scan started event will indicated to ath11k after the 11d
scan completed.
While 11d scan/hw scan is running in firmware, if ath11k update channel
list to firmware by WMI_SCAN_CHAN_LIST_CMDID, then firmware will cancel
the current scan which is running, it lead the scan failed. The patch
commit 9dcf6808b2 ("ath11k: add 11d scan offload support") used
finish_11d_scan/finish_11d_ch_list/pending_11d to synchronize the 11d
scan/hw scan/channel list between ath11k/firmware/mac80211 and to avoid
the scan fail.
Add wait operation before ath11k update channel list, function
ath11k_reg_update_chan_list() will wait until the current 11d scan/hw
scan completed. And remove the wait operation of start 11d scan and
waiting channel list complete in hw scan. After these changes, resume
time cost reduce about 5 seconds and also hw scan time cost reduced
obviously, and scan failed not seen.
The 11d scan is sent to firmware only one time for each interface added
in mac.c, and it is moved after the 1st hw scan because 11d scan will
cost some time and thus leads the AP scan result update to UI delay.
Currently priority of ath11k's hw scan is WMI_SCAN_PRIORITY_LOW, and
priority of 11d scan in firmware is WMI_SCAN_PRIORITY_MEDIUM, then the
11d scan which sent after hw scan will cancel the hw scan in firmware,
so change the priority to WMI_SCAN_PRIORITY_MEDIUM for the hw scan which
is in front of the 11d scan, thus it will not happen scan cancel in
firmware.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3
Fixes: 9dcf6808b2 ("ath11k: add 11d scan offload support")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215777
Cc: <stable@vger.kernel.org>
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220328035832.14122-1-quic_wgong@quicinc.com
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220427111619.9758-1-kvalo@kernel.org
Variable rng_size is being initialized with a value that is never read,
the variable is being re-assigned later on. The initialization is
redundant and can be removed.
Cleans up cppcheck warning:
Variable 'rng_size' is assigned a value that is never used.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The function qat_uclo_check_image_compat has an unsigned return type, but
returns a negative constant to indicate an error condition. So we change
unsigned to int.
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since commit 358ba762d9 ("crypto: caam - enable prediction resistance
in HRWNG") the following CAAM errors can be seen on i.MX6SX:
caam_jr 2101000.jr: 20003c5b: CCB: desc idx 60: RNG: Hardware error
hwrng: no data available
This error is due to an incorrect entropy delay for i.MX6SX.
Fix it by increasing the minimum entropy delay for i.MX6SX
as done in U-Boot:
https://patchwork.ozlabs.org/project/uboot/patch/20220415111049.2565744-1-gaurav.jain@nxp.com/
As explained in the U-Boot patch:
"RNG self tests are run to determine the correct entropy delay.
Such tests are executed with different voltages and temperatures to identify
the worst case value for the entropy delay. For i.MX6SX, it was determined
that after adding a margin value of 1000 the minimum entropy delay should be
at least 12000."
Cc: <stable@vger.kernel.org>
Fixes: 358ba762d9 ("crypto: caam - enable prediction resistance in HRWNG")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Vabhav Sharma <vabhav.sharma@nxp.com>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
