According to the PCIe standard the PERST# signal (reset-gpio in
fsl,imx* compatible dts) should be kept asserted for at least 100 usec
before the PCIe refclock is stable, should be kept asserted for at
least 100 msec after the power rails are stable and the host should wait
at least 100 msec after it is de-asserted before accessing the
configuration space of any attached device.
From PCIe CEM r2.0, sec 2.6.2
T-PVPERL: Power stable to PERST# inactive - 100 msec
T-PERST-CLK: REFCLK stable before PERST# inactive - 100 usec.
From PCIe r5.0, sec 6.6.1
With a Downstream Port that does not support Link speeds greater than
5.0 GT/s, software must wait a minimum of 100 ms before sending a
Configuration Request to the device immediately below that Port.
Failure to do so could prevent PCIe devices to be working correctly,
and this was experienced with real devices.
Move reset assert to imx6_pcie_assert_core_reset(), this way we ensure
that PERST# is asserted before enabling any clock, move de-assert to the
end of imx6_pcie_deassert_core_reset() after the clock is enabled and
deemed stable and add a new delay of 100 msec just afterward.
Link: https://lore.kernel.org/all/20220211152550.286821-1-francesco.dolcini@toradex.com
Link: https://lore.kernel.org/r/20220404081509.94356-1-francesco.dolcini@toradex.com
Fixes: bb38919ec5 ("PCI: imx6: Add support for i.MX6 PCIe controller")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
There were more EXPORT_SYMBOL types in the past. The following commits
removed unused ones.
- f1c3d73e97 ("module: remove EXPORT_SYMBOL_GPL_FUTURE")
- 367948220f ("module: remove EXPORT_UNUSED_SYMBOL*")
There are 3 remaining in enum export, but export_unknown does not make
any sense because we never expect such a situation like "we do not know
how it was exported".
If the symbol name starts with "__ksymtab_", but the section name
does not start with "___ksymtab+" or "___ksymtab_gpl+", it is not an
exported symbol.
It occurs when a variable starting with "__ksymtab_" is directly defined:
int __ksymtab_foo;
Presumably, there is no practical issue for using such a weird variable
name (but there is no good reason for doing so, either).
Anyway, that is not an exported symbol. Setting export_unknown is not
the right thing to do. Do not call sym_add_exported() in this case.
With pointless export_unknown removed, the export type finally becomes
boolean (either EXPORT_SYMBOL or EXPORT_SYMBOL_GPL).
I renamed the field name to is_gpl_only. EXPORT_SYMBOL_GPL sets it true.
Only GPL-compatible modules can use it.
I removed the orphan comment, "How a symbol is exported", which is
unrelated to sec_mismatch_count. It is about enum export.
See commit bd5cbcedf4 ("kbuild: export-type enhancement to modpost.c")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Tested-by: Nathan Chancellor <nathan@kernel.org>
This is a remnant of commit 6543becf26 ("mod/file2alias: make
modalias generation safe for cross compiling").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
When CONFIG_MODVERSIONS=y, the output from genksyms is saved in
separate *.symversions files, and will be used much later when
CONFIG_LTO_CLANG=y because it is impossible to update LLVM bit code
here.
This approach is not robust because:
- *.symversions may or may not exist. If *.symversions does not
exist, we never know if it is missing for legitimate reason
(i.e. no EXPORT_SYMBOL) or something bad has happened (for
example, the user accidentally deleted it). Once it occurs,
it is not self-healing because *.symversions is generated
as a side effect.
- stale (i.e. invalid) *.symversions might be picked up if an
object is generated in a non-ordinary way, and corresponding
*.symversions (, which was generated by old builds) just happen
to exist.
A more robust approach is to save symbol versions in *.cmd files
because:
- *.cmd always exists (if the object is generated by if_changed
rule or friends). Even if the user accidentally deletes it,
it will be regenerated in the next build.
- *.cmd is always re-generated when the object is updated. This
avoid stale version information being picked up.
I will remove *.symversions later.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Nicolas Schier <nicolas@fjasle.eu>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Tested-by: Nathan Chancellor <nathan@kernel.org>
A *.mod file lists the member objects of a module, but vmlinux does
not have such a file.
Generate this list to allow modpost to know all the member objects.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Tested-by: Nathan Chancellor <nathan@kernel.org>
A later commit will add more code to this list_for_each_entry loop.
Before that, move the loop body into a separate helper function.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Tested-by: Nathan Chancellor <nathan@kernel.org>
add_intree_flag(), add_retpoline(), and add_staging_flag() are small
enough to be merged into add_header().
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Tested-by: Nathan Chancellor <nathan@kernel.org>
If the new-kernel-pkg utility isn't present, try using kernel-install.
This is what the %preun scriptlet in scripts/package/mkspec does too.
Signed-off-by: Reza Arbab <arbab@linux.ibm.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Many architectures have similar install.sh scripts.
The first half is really generic; it verifies that the kernel image
and System.map exist, then executes ~/bin/${INSTALLKERNEL} or
/sbin/${INSTALLKERNEL} if available.
The second half is kind of arch-specific; it copies the kernel image
and System.map to the destination, but the code is slightly different.
Factor out the generic part into scripts/install.sh.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
gcc 12 does not (always) optimize away code that should only be generated
if parameters are constant and within in a certain range. This depends on
various obscure kernel config options, however in particular
PROFILE_ALL_BRANCHES can trigger this compile error:
In function ‘__atomic_add_const’,
inlined from ‘__preempt_count_add.part.0’ at ./arch/s390/include/asm/preempt.h:50:3:
./arch/s390/include/asm/atomic_ops.h:80:9: error: impossible constraint in ‘asm’
80 | asm volatile( \
| ^~~
Workaround this by simply disabling the optimization for
PROFILE_ALL_BRANCHES, since the kernel will be so slow, that this
optimization won't matter at all.
Reported-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
clock_delta is declared as unsigned long in various places. However,
the clock sync delta can be negative. This would add a huge positive
offset in clock_sync_global where clock_delta is added to clk.eitod
which is a 72 bit integer. Declare it as signed long to fix this.
Cc: stable@vger.kernel.org
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The size of the TOD offset field in the stp info response is 64 bits.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@de.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Keychron's C-series and K-series of keyboards copy the vendor and
product IDs of an Apple keyboard, but only behave like that device when
set to "Mac" mode. In "Windows" mode, the Fn key doesn't generate a
scancode, so it's impossible to use the F1-F12 keys when fnmode is set
to its default value of 1.
To fix this, make fnmode default to the new value of 3, which behaves
like fnmode=2 for Keychron keyboards and like fnmode=1 for actual Apple
keyboards. This way, Keychron devices are fully usable in both "Windows"
and "Mac" modes, while behavior is unchanged for everything else.
Signed-off-by: Bryan Cain <bryancain3@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The (incorrect) "Pen" (0x02) application usage used in replacement
report descriptors throughout the drivers leads to all tablets
recognized as a "direct" input device (i.e. a tablet monitor) by
recent kernels, which messes up desktop environments [1].
Replace the application usage with "Digitizer" (0x01) for each
non-display graphics tablet.
[1] https://lore.kernel.org/linux-input/f39ce5d5-bd5b-bd3f-3ea2-9b2a89ba1eb1@gmail.com/
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Always decrement touch report values to have the range start with zero,
regardless if flipped or not. This fixes the future non-flipped touch
strip reports.
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Accommodate both touch ring and touch strip in naming throughout
hid-uclogic by talking about abstract "touch" instead of "touch ring",
wherever possible.
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Return the raw parameters buffer from uclogic_params_pen_init_v2(), if
requested, as a way to identify the tablet.
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Move parameter printing from a format string/argument list to a function
to allow printing the full parameters, which now wouldn't fit into a
single print call.
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Currently sensor hub shows "<UNKNOWN>", but this is a pretty common
type available in many notebooks. Hence using the string "SENSOR HUB".
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This should allow external drivers to reference this bus ID
reservation and detect data coming from amd-sfh.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
when HID device is loaded a wrong string is shown as
physical location is not declared.
```
hid-generic 0020:1022:0001.0009: hidraw4: <UNKNOWN>
HID v0.00 Device [hid-amdtp 1022:0001] on
```
Hence use amd sfh driver name or device name which is connected
to the HID device.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Modifying the amd-sfh hid name to meaningful name.
Fixes: 4b2c53d93a ("SFH:Transport Driver to add support of AMD Sensor Fusion Hub (SFH)")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Modifying the amd-sfh bus name to meaningful name.
Fixes: 4b2c53d93a ("SFH:Transport Driver to add support of AMD Sensor Fusion Hub (SFH)")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Sensor discovery status fails in case of broken sensors or
platform not supported. Hence disable driver on failure
of sensor discovery.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Adding bpf_program__set_insns that allows to set new instructions
for a BPF program.
This is a very advanced libbpf API and users need to know what
they are doing. This should be used from prog_prepare_load_fn
callback only.
We can have changed instructions after calling prog_prepare_load_fn
callback, reloading them.
One of the users of this new API will be perf's internal BPF prologue
generation.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220510074659.2557731-2-jolsa@kernel.org
Looks like all the changes to this driver had been tree-wide
refactoring since git era begun. The driver is using virt_to_bus()
we should make it use more modern DMA APIs but since it's unlikely
to be getting any use these days delete it instead. We can always
revert to bring it back.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Looks like all the changes to this driver had been tree-wide
refactoring since git era begun. The driver is using virt_to_bus()
we should make it use more modern DMA APIs but since it's unlikely
to be getting any use these days delete it instead. We can always
revert to bring it back.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet says:
====================
net: CONFIG_DEBUG_NET and friends
This patch series is inspired by some syzbot reports
hinting that skb transport_header might be not set
in places we expect it being set.
Add a new CONFIG_DEBUG_NET option
and DEBUG_NET_WARN_ON_ONCE() helper, so that we can start
adding more sanity checks in the future.
Replace two BUG() in skb_checksum_help()
with less risky code.
v2: make first patch compile on more arches/compilers
add the 5th patch to add more debugging in skb_checksum_help()
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a followup of previous patch.
Dumping the stack trace is a good start, but printing
basic skb information is probably better.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
I have a syzbot report that managed to get a crash in skb_checksum_help()
If syzbot can trigger these BUG(), it makes sense to replace
them with more friendly WARN_ON_ONCE() since skb_checksum_help()
can instead return an error code.
Note that syzbot will still crash there, until real bug is fixed.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make sure skb_transport_header() and skb_transport_offset() uses
are not fooled if the transport header has not been set.
This change will likely expose existing bugs in linux networking stacks.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This config option enables network debugging checks.
This patch adds DEBUG_NET_WARN_ON_ONCE(cond)
Note that this is not a replacement for WARN_ON_ONCE(cond)
as (cond) is not evaluated if CONFIG_DEBUG_NET is not set.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove from include/linux/netdevice.h helpers
that send debug/info/warnings to syslog.
We plan adding more helpers in following patches.
v2: added two includes, and 'struct net_device' forward declaration
to avoid compile errors (kernel bots)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexandra Winter says:
====================
s390/net: Cleanup some code checker findings
clean up smatch findings in legacy code. I was not able to provoke
any real failures on my systems, but other hardware reactions,
timing conditions or compiler output, may cause failures.
There are still 2 smatch warnings left in s390/net:
drivers/s390/net/ctcm_main.c:1326 add_channel() warn: missing error code 'rc'
This one is a false positive.
drivers/s390/net/netiucv.c:1355 netiucv_check_user() warn: argument 3 to %02x specifier has type 'char'
Postponing this one, need to better understand string handling in iucv.
There are several sparse warnings left in ctcm, like:
drivers/s390/net/ctcm_fsms.c:573:9: warning: context imbalance in 'ctcm_chx_setmode' - different lock contexts for basic block
Those are mentioned in the source, no plan to rework.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
smatch complains about
drivers/s390/net/lcs.c:1741 lcs_get_control() warn: variable dereferenced before check 'card->dev' (see line 1739)
Fixes: 27eb5ac8f0 ("[PATCH] s390: lcs driver bug fixes and improvements [1/2]")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
smatch complains about
drivers/s390/net/ctcm_mpc.c:1210 ctcmpc_unpack_skb() warn: possible memory leak of 'mpcginfo'
mpc_action_discontact() did not free mpcginfo. Consolidate the freeing in
ctcmpc_unpack_skb().
Fixes: 293d984f0e ("ctcm: infrastructure for replaced ctc driver")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Found by cppcheck and smatch.
smatch complains about
drivers/s390/net/ctcm_sysfs.c:43 ctcm_buffer_write() warn: variable dereferenced before check 'priv' (see line 42)
Fixes: 3c09e2647b ("ctcm: rename READ/WRITE defines to avoid redefinitions")
Reported-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Grant Grundler says:
====================
net: atlantic: more fuzzing fixes
It essentially describes four problems:
1) validate rxd_wb->next_desc_ptr before populating buff->next
2) "frag[0] not initialized" case in aq_ring_rx_clean()
3) limit iterations handling fragments in aq_ring_rx_clean()
4) validate hw_head_ in hw_atl_b0_hw_ring_tx_head_update()
(1) was fixed by Zekun Shen <bruceshenzk@gmail.com> around the same time with
"atlantic: Fix buff_ring OOB in aq_ring_rx_clean" (SHA1 5f50153288).
I've added one "clean up" contribution:
"net: atlantic: reduce scope of is_rsc_complete"
I tested the "original" patches using chromeos-v5.4 kernel branch:
https://chromium-review.googlesource.com/q/hashtag:pcinet-atlantic-2022q1+(status:open%20OR%20status:merged)
I've forward ported those patches to 5.18-rc2 and compiled them but am
unable to test them on 5.18-rc2 kernel (logistics problems).
Credit largely goes to ChromeOS Fuzzing team members:
Aashay Shringarpure, Yi Chou, Shervin Oloumi
V2 changes:
o drop first patch - was already fixed upstream differently
o reduce (4) "validate hw_head_" to simple bounds checking.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Don't defer handling the err case outside the loop. That's pointless.
And since is_rsc_complete is only used inside this loop, declare
it inside the loop to reduce it's scope.
Signed-off-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In aq_ring_rx_clean(), if buff->is_eop is not set AND
buff->len < AQ_CFG_RX_HDR_SIZE, then hdr_len remains equal to
buff->len and skb_add_rx_frag(xxx, *0*, ...) is not called.
The loop following this code starts calling skb_add_rx_frag() starting
with i=1 and thus frag[0] is never initialized. Since i is initialized
to zero at the top of the primary loop, we can just reference and
post-increment i instead of hardcoding the 0 when calling
skb_add_rx_frag() the first time.
Reported-by: Aashay Shringarpure <aashay@google.com>
Reported-by: Yi Chou <yich@google.com>
Reported-by: Shervin Oloumi <enlightened@google.com>
Signed-off-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
