'damon_va_apply_three_regions()' is for adjusting address ranges to fit in
three discontiguous ranges. The function can be generalized for arbitrary
number of discontiguous ranges and reused for future usage, such as
arbitrary online regions update. For such future usage, this commit
introduces a generalized version of the function called
'damon_set_regions()'.
Link: https://lkml.kernel.org/r/20220429160606.127307-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When 'after_sampling()' or 'after_aggregation()' DAMON callbacks return an
error, kdamond continues the remaining loop once. It makes no much sense
to run the remaining part while something wrong already happened. The
context might be corrupted or having invalid data. This commit therefore
makes kdamond skips the remaining works and immediately finish in the
cases.
Link: https://lkml.kernel.org/r/20220429160606.127307-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon: Support online tuning".
Effects of DAMON and DAMON-based Operation Schemes highly depends on the
configurations. Wrong configurations could even result in unexpected
efficiency degradations. For finding a best configuration, repeating
incremental configuration changes and results measurements, in other
words, online tuning, could be helpful.
Nevertheless, DAMON kernel API supports only restrictive online tuning.
Worse yet, the sysfs-based DAMON user interface doesn't support online
tuning at all. DAMON_RECLAIM also doesn't support online tuning.
This patchset makes the DAMON kernel API, DAMON sysfs interface, and
DAMON_RECLAIM supports online tuning.
Sequence of patches
-------------------
First two patches enhance DAMON online tuning for kernel API users.
Specifically, patch 1 let kernel API users to be able to do DAMON online
tuning without a restriction, and patch 2 makes error handling easier.
Following seven patches (patches 3-9) refactor code for better readability
and easier reuse of code fragments that will be useful for online tuning
support.
Patch 10 introduces DAMON callback based user request handling structure
for DAMON sysfs interface, and patch 11 enables DAMON online tuning via
DAMON sysfs interface. Documentation patch (patch 12) for usage of it
follows.
Patch 13 enables online tuning of DAMON_RECLAIM and finally patch 14
documents the DAMON_RECLAIM online tuning usage.
This patch (of 14):
For updating input parameters for running DAMON contexts, DAMON kernel API
users can use the contexts' callbacks, as it is the safe place for context
internal data accesses. When the context has DAMON-based operation
schemes and all schemes are deactivated due to their watermarks, however,
DAMON does nothing but only watermarks checks. As a result, no callbacks
will be called back, and therefore the kernel API users cannot update the
input parameters including monitoring attributes, DAMON-based operation
schemes, and watermarks.
To let users easily update such DAMON input parameters in such a case,
this commit adds a new callback, 'after_wmarks_check()'. It will be
called after each watermarks check. Users can do the online input
parameters update in the callback even under the schemes deactivated case.
Link: https://lkml.kernel.org/r/20220429160606.127307-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "support fixed virtual address ranges monitoring".
The monitoring operations set for virtual address spaces automatically
updates the monitoring target regions to cover entire mappings of the
virtual address spaces as much as possible. Some users could have more
information about their programs than kernel and therefore have interest
in not entire regions but only specific regions. For such cases, the
automatic monitoring target regions updates are only unnecessary overhead
or distractions.
This patchset adds supports for the use case on DAMON's kernel API
(DAMON_OPS_FVADDR) and sysfs interface ('fvaddr' keyword for 'operations'
sysfs file).
This patch (of 3):
The monitoring operations set for virtual address spaces automatically
updates the monitoring target regions to cover entire mappings of the
virtual address spaces as much as possible. Some users could have more
information about their programs than kernel and therefore have interest
in not entire regions but only specific regions. For such cases, the
automatic monitoring target regions updates are only unnecessary overheads
or distractions.
For such cases, DAMON's API users can simply set the '->init()' and
'->update()' of the DAMON context's '->ops' NULL, and set the target
monitoring regions when creating the context. But, that would be a dirty
hack. Worse yet, the hack is unavailable for DAMON user space interface
users.
To support the use case in a clean way that can easily exported to the
user space, this commit adds another monitoring operations set called
'fvaddr', which is same to 'vaddr' but does not automatically update the
monitoring regions. Instead, it will only respect the virtual address
regions which have explicitly passed at the initial context creation.
Note that this commit leave sysfs interface not supporting the feature
yet. The support will be made in a following commit.
Link: https://lkml.kernel.org/r/20220426231750.48822-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20220426231750.48822-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON programming interface users can know if specific monitoring ops set
is registered or not using 'damon_is_registered_ops()', but there is no
such method for the user space. To help the case, this commit adds a new
DAMON sysfs file called 'avail_operations' under each context directory
for listing available monitoring ops. Reading the file will list each
registered monitoring ops on each line.
Link: https://lkml.kernel.org/r/20220426203843.45238-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon: allow users know which monitoring ops are available".
DAMON users can configure it for vaious address spaces including virtual
address spaces and the physical address space by setting its monitoring
operations set with appropriate one for their purpose. However, there is
no celan and simple way to know exactly which monitoring operations sets
are available on the currently running kernel.
This patchset adds functions for the purpose on DAMON's kernel API
('damon_is_registered_ops()') and sysfs interface ('avail_operations' file
under each context directory).
This patch (of 4):
To know if a specific 'damon_operations' is registered, users need to
check the kernel config or try 'damon_select_ops()' with the ops of the
question, and then see if it successes. In the latter case, the user
should also revert the change. To make the process simple and convenient,
this commit adds a function for checking if a specific 'damon_operations'
is registered or not.
Link: https://lkml.kernel.org/r/20220426203843.45238-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20220426203843.45238-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Out-of-bounds accesses that aren't caught by a guard page will result in
corruption of canary memory. In pathological cases, where an object has
certain alignment requirements, an out-of-bounds access might never be
caught by the guard page. Such corruptions, however, are only detected on
kfree() normally. If the bug causes the kernel to panic before kfree(),
KFENCE has no opportunity to report the issue. Such corruptions may also
indicate failing memory or other faults.
To provide some more information in such cases, add the option to check
canary bytes on panic. This might help narrow the search for the panic
cause; but, due to only having the allocation stack trace, such reports
are difficult to use to diagnose an issue alone. In most cases, such
reports are inactionable, and is therefore an opt-in feature (disabled by
default).
[akpm@linux-foundation.org: add __read_mostly, per Marco]
Link: https://lkml.kernel.org/r/20220425022456.44300-1-huangshaobo6@huawei.com
Signed-off-by: huangshaobo <huangshaobo6@huawei.com>
Suggested-by: chenzefeng <chenzefeng2@huawei.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Xiaoming Ni <nixiaoming@huawei.com>
Cc: Wangbing <wangbing6@huawei.com>
Cc: Jubin Zhong <zhongjubin@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Calls to change_protection_range() on THP can trigger, at least on x86,
two TLB flushes for one page: one immediately, when pmdp_invalidate() is
called by change_huge_pmd(), and then another one later (that can be
batched) when change_protection_range() finishes.
The first TLB flush is only necessary to prevent the dirty bit (and with a
lesser importance the access bit) from changing while the PTE is modified.
However, this is not necessary as the x86 CPUs set the dirty-bit
atomically with an additional check that the PTE is (still) present. One
caveat is Intel's Knights Landing that has a bug and does not do so.
Leverage this behavior to eliminate the unnecessary TLB flush in
change_huge_pmd(). Introduce a new arch specific pmdp_invalidate_ad()
that only invalidates the access and dirty bit from further changes.
Link: https://lkml.kernel.org/r/20220401180821.1986781-4-namit@vmware.com
Signed-off-by: Nadav Amit <namit@vmware.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently, using mprotect() to unprotect a memory region or uffd to
unprotect a memory region causes a TLB flush. However, in such cases the
PTE is often not modified (i.e., remain RO) and therefore not TLB flush is
needed.
Add an arch-specific pte_needs_flush() which tells whether a TLB flush is
needed based on the old PTE and the new one. Implement an x86
pte_needs_flush().
Always flush the TLB when it is architecturally needed even when skipping
a TLB flush might only result in a spurious page-faults by skipping the
flush.
Even with such conservative manner, we can in the future further refine
the checks to test whether a PTE is present by only considering the
architectural _PAGE_PRESENT flag instead of {pte|pmd}_preesnt(). For not
be careful and use the latter.
Link: https://lkml.kernel.org/r/20220401180821.1986781-3-namit@vmware.com
Signed-off-by: Nadav Amit <namit@vmware.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Nick Piggin <npiggin@gmail.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6.
This patchset is intended to remove unnecessary TLB flushes during
mprotect() syscalls. Once this patch-set make it through, similar and
further optimizations for MADV_COLD and userfaultfd would be possible.
Basically, there are 3 optimizations in this patch-set:
1. Use TLB batching infrastructure to batch flushes across VMAs and do
better/fewer flushes. This would also be handy for later userfaultfd
enhancements.
2. Avoid unnecessary TLB flushes. This optimization is the one that
provides most of the performance benefits. Unlike previous versions,
we now only avoid flushes that would not result in spurious
page-faults.
3. Avoiding TLB flushes on change_huge_pmd() that are only needed to
prevent the A/D bits from changing.
Andrew asked for some benchmark numbers. I do not have an easy
determinate macrobenchmark in which it is easy to show benefit. I
therefore ran a microbenchmark: a loop that does the following on
anonymous memory, just as a sanity check to see that time is saved by
avoiding TLB flushes. The loop goes:
mprotect(p, PAGE_SIZE, PROT_READ)
mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE)
*p = 0; // make the page writable
The test was run in KVM guest with 1 or 2 threads (the second thread was
busy-looping). I measured the time (cycles) of each operation:
1 thread 2 threads
mmots +patch mmots +patch
PROT_READ 3494 2725 (-22%) 8630 7788 (-10%)
PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%)
[ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ]
The exact numbers are really meaningless, but the benefit is clear. There
are 2 interesting results though.
(1) PROT_READ is cheaper, while one can expect it not to be affected.
This is presumably due to TLB miss that is saved
(2) Without memory access (*p = 0), the speedup of the patch is even
greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush.
As a result both operations on the patched kernel take roughly ~1500
cycles (with either 1 or 2 threads), whereas on mmotm their cost is as
high as presented in the table.
This patch (of 3):
change_pXX_range() currently does not use mmu_gather, but instead
implements its own deferred TLB flushes scheme. This both complicates the
code, as developers need to be aware of different invalidation schemes,
and prevents opportunities to avoid TLB flushes or perform them in finer
granularity.
The use of mmu_gather for modified PTEs has benefits in various scenarios
even if pages are not released. For instance, if only a single page needs
to be flushed out of a range of many pages, only that page would be
flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction
can be used instead of 512 instructions (or a full TLB flush, which would
Linux would actually use by default). mprotect() over multiple VMAs
requires a single flush.
Use mmu_gather in change_pXX_range(). As the pages are not released, only
record the flushed range using tlb_flush_pXX_range().
Handle THP similarly and get rid of flush_cache_range() which becomes
redundant since tlb_start_vma() calls it when needed.
Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com
Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com
Signed-off-by: Nadav Amit <namit@vmware.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull interconnect fixes from Georgi:
"interconnect fixes for v5.18-rc
This contains an additional fix for sc7180 and sdx55 platforms that helps
them to enter suspend even on devices that don't have the most recent DT
changes.
- interconnect: Restore sync state by ignoring ipa-virt in provider count
Signed-off-by: Georgi Djakov <djakov@kernel.org>"
* tag 'icc-5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: Restore sync state by ignoring ipa-virt in provider count
interrupt-parent is not to be used as a boolean property.
It is already present in the DT in the proper way it's supposed to be used:
interrupt-parent = <&gic>;
This is also reported by dtbs_check:
arch/arm/boot/dts/at91-sama7g5ek.dtb: interrupt-controller@e8c11000: interrupt-parent: True is not of type 'array'
From schema: /.local/lib/python3.8/site-packages/dtschema/schemas/interrupts.yaml
Fixes: 7540629e2f ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek")
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220503133127.64320-1-eugen.hristev@microchip.com
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Arm SMMU updates for 5.19
- Add new Qualcomm device-tree compatible strings
- Add new Nvidia device-tree compatible string for Tegra234
- Fix UAF in SMMUv3 shared virtual addressing code
- Force identity-mapped domains for users of ye olde SMMU legacy binding
- Minor cleanups
