Registers fscache context for primary data blob. Also move the
initialization of s_op and related fields forward, since anonymous
inode will be allocated under the super block when registering the
fscache context.
Something worth mentioning about the cleanup routine.
1. The fscache context will instantiate anonymous inodes under the super
block. Release these anonymous inodes when .put_super() is called, or
we'll get "VFS: Busy inodes after unmount." warning.
2. The fscache context is initialized prior to the root inode. If
.kill_sb() is called when mount failed, .put_super() won't be called
when root inode has not been initialized yet. Thus .kill_sb() shall
also contain the cleanup routine.
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220425122143.56815-16-jefflexu@linux.alibaba.com
Acked-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
A new fscache based mode is going to be introduced for erofs, in which
case on-demand read semantics is implemented through fscache.
As the first step, register fscache volume for each erofs filesystem.
That means, data blobs can not be shared among erofs filesystems. In the
following iteration, we are going to introduce the domain semantics, in
which case several erofs filesystems can belong to one domain, and data
blobs can be shared among these erofs filesystems of one domain.
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220425122143.56815-12-jefflexu@linux.alibaba.com
Acked-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Implement the data plane of on-demand read mode.
The early implementation [1] place the entry to
cachefiles_ondemand_read() in fscache_read(). However, fscache_read()
can only detect if the requested file range is fully cache miss, whilst
we need to notify the user daemon as long as there's a hole inside the
requested file range.
Thus the entry is now placed in cachefiles_prepare_read(). When working
in on-demand read mode, once a hole detected, the read routine will send
a READ request to the user daemon. The user daemon needs to fetch the
data and write it to the cache file. After sending the READ request, the
read routine will hang there, until the READ request is handled by the
user daemon. Then it will retry to read from the same file range. If no
progress encountered, the read routine will fail then.
A new NETFS_SREQ_ONDEMAND flag is introduced to indicate that on-demand
read should be done when a cache miss encountered.
[1] https://lore.kernel.org/all/20220406075612.60298-6-jefflexu@linux.alibaba.com/ #v8
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20220425122143.56815-6-jefflexu@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Notify the user daemon that cookie is going to be withdrawn, providing a
hint that the associated anonymous fd can be closed.
Be noted that this is only a hint. The user daemon may close the
associated anonymous fd when receiving the CLOSE request, then it will
receive another anonymous fd when the cookie gets looked up. Or it may
ignore the CLOSE request, and keep writing data through the anonymous
fd. However the next time the cookie gets looked up, the user daemon
will still receive another new anonymous fd.
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20220425122143.56815-5-jefflexu@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Add a refcount to avoid the deadlock in on-demand read mode. The
on-demand read mode will pin the corresponding cachefiles object for
each anonymous fd. The cachefiles object is unpinned when the anonymous
fd gets closed. When the user daemon exits and the fd of
"/dev/cachefiles" device node gets closed, it will wait for all
cahcefiles objects getting withdrawn. Then if there's any anonymous fd
getting closed after the fd of the device node, the user daemon will
hang forever, waiting for all objects getting withdrawn.
To fix this, add a refcount indicating if there's any object pinned by
anonymous fds. The cachefiles cache gets unbound and withdrawn when the
refcount is decreased to 0. It won't change the behaviour of the
original mode, in which case the cachefiles cache gets unbound and
withdrawn as long as the fd of the device node gets closed.
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220509074028.74954-4-jefflexu@linux.alibaba.com
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Fscache/CacheFiles used to serve as a local cache for a remote
networking fs. A new on-demand read mode will be introduced for
CacheFiles, which can boost the scenario where on-demand read semantics
are needed, e.g. container image distribution.
The essential difference between these two modes is seen when a cache
miss occurs: In the original mode, the netfs will fetch the data from
the remote server and then write it to the cache file; in on-demand
read mode, fetching the data and writing it into the cache is delegated
to a user daemon.
As the first step, notify the user daemon when looking up cookie. In
this case, an anonymous fd is sent to the user daemon, through which the
user daemon can write the fetched data to the cache file. Since the user
daemon may move the anonymous fd around, e.g. through dup(), an object
ID uniquely identifying the cache file is also attached.
Also add one advisory flag (FSCACHE_ADV_WANT_CACHE_SIZE) suggesting that
the cache file size shall be retrieved at runtime. This helps the
scenario where one cache file contains multiple netfs files, e.g. for
the purpose of deduplication. In this case, netfs itself has no idea the
size of the cache file, whilst the user daemon should give the hint on
it.
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220509074028.74954-3-jefflexu@linux.alibaba.com
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Extract the generic routine of writing data to cache files, and make it
generally available.
This will be used by the following patch implementing on-demand read
mode. Since it's called inside CacheFiles module, make the interface
generic and unrelated to netfs_cache_resources.
It is worth noting that, ki->inval_counter is not initialized after
this cleanup. It shall not make any visible difference, since
inval_counter is no longer used in the write completion routine, i.e.
cachefiles_write_complete().
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20220425122143.56815-2-jefflexu@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Since errors from nfs_pageio_complete() are already being reported
through nfs_async_write_error(), we should not be returning them to the
callers of do_writepages() as well. They will end up being reported
through the generic mechanism instead.
Fixes: 6fbda89b25 ("NFS: Replace custom error reporting mechanism with generic one")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If we do flush cached writebacks in nfs_write_end() due to the imminent
expiration of an RPCSEC_GSS session, then we should defer reporting any
resulting errors until the calls to file_check_and_advance_wb_err() in
nfs_file_write() and nfs_file_fsync().
Fixes: 6fbda89b25 ("NFS: Replace custom error reporting mechanism with generic one")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Any errors reported by the write() system call need to be cleared from
the file descriptor's error tracking. The current call to nfs_wb_all()
causes the error to be reported, but since it doesn't call
file_check_and_advance_wb_err(), we can end up reporting the same error
a second time when the application calls fsync().
Note that since Linux 4.13, the rule is that EIO may be reported for
write(), but it must be reported by a subsequent fsync(), so let's just
drop reporting it in write.
The check for nfs_ctx_key_to_expire() is just a duplicate to the one
already in nfs_write_end(), so let's drop that too.
Reported-by: ChenXiaoSong <chenxiaosong2@huawei.com>
Fixes: ce368536dd ("nfs: nfs_file_write() should check for writeback errors")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If the commit to disk is interrupted, we should still first check for
filesystem errors so that we can report them in preference to the error
due to the signal.
Fixes: 2197e9b06c ("NFS: Fix up fsync() when the server rebooted")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If the attempt to flush data was interrupted due to a local signal, then
just requeue the writes back for I/O.
Fixes: 6fbda89b25 ("NFS: Replace custom error reporting mechanism with generic one")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The existing logic happens to work fine on UML, but is not correct when
running on other arches.
1. We didn't initialize `int err`, and kunit_filter_suites() doesn't
explicitly set it to 0 on success. So we had false "failures".
Note: it doesn't happen on UML, causing this to get overlooked.
2. If we error out, we do not call kunit_handle_shutdown().
This makes kunit.py timeout when using a non-UML arch, since the QEMU
process doesn't ever exit.
Fixes: a02353f491 ("kunit: bail out of test filtering logic quicker if OOM")
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This patch enables idmapped mounts for erofs, since all dedicated helpers
for this functionality existsm, so, in this patch we just pass down the
user_namespace argument from the VFS methods to the relevant helpers.
Simple idmap example on erofs image:
1. mkdir dir
2. touch dir/file
3. mkfs.erofs erofs.img dir
4. mount -t erofs -o loop erofs.img /mnt/erofs/
5. ls -ln /mnt/erofs/
total 0
-rw-rw-r-- 1 1000 1000 0 May 17 15:26 file
6. mount-idmapped --map-mount b:1000:1001:1 /mnt/erofs/ /mnt/scratch_erofs/
7. ls -ln /mnt/scratch_erofs/
total 0
-rw-rw-r-- 1 1001 1001 0 May 17 15:26 file
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Chao Yu <chao.yu@oppo.com>
Link: https://lore.kernel.org/r/20220517104103.3570721-1-chao@kernel.org
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
I got some KASAN report as below:
[ 46.959738] ==================================================================
[ 46.960430] BUG: KASAN: use-after-free in z_erofs_shifted_transform+0x2bd/0x370
[ 46.960430] Read of size 4074 at addr ffff8880300c2f8e by task fssum/188
...
[ 46.960430] Call Trace:
[ 46.960430] <TASK>
[ 46.960430] dump_stack_lvl+0x41/0x5e
[ 46.960430] print_report.cold+0xb2/0x6b7
[ 46.960430] ? z_erofs_shifted_transform+0x2bd/0x370
[ 46.960430] kasan_report+0x8a/0x140
[ 46.960430] ? z_erofs_shifted_transform+0x2bd/0x370
[ 46.960430] kasan_check_range+0x14d/0x1d0
[ 46.960430] memcpy+0x20/0x60
[ 46.960430] z_erofs_shifted_transform+0x2bd/0x370
[ 46.960430] z_erofs_decompress_pcluster+0xaae/0x1080
The root cause is that the tail pcluster won't be a complete filesystem
block anymore. So if ztailpacking is used, the second part of an
uncompressed tail pcluster may not be ``rq->pageofs_out``.
Fixes: ab749badf9 ("erofs: support unaligned data decompression")
Fixes: cecf864d3d ("erofs: support inline data decompression")
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20220512115833.24175-1-hsiangkao@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
The design of INT indicator register (R_AX_PCIE_HIMR00_V1) is to reduce IO
during frequent interrupts, because it can stop chip sending interrupt to
host if we just set this indicator to 0, not all IMR(s). This indicator
register looks like a root interrupt controller of wifi chip.
However, we can't set all other IMR(s) to 0 during we are running on
interrupt service routine, or the indicator register can't reflect the
status of certain interrupt happened during this period, and then miss
some interrupts especially SER interrupt events.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220516005215.5878-7-pkshih@realtek.com
It can be convenient to put a string value into a ptwrite payload as
a quick and easy way to identify what is being printed.
To make that useful, if the Intel ptwrite payload value contains only
printable ASCII characters padded with NULLs, then print it also as a
string.
Using the example program from the "Emulated PTWRITE" section of
tools/perf/Documentation/perf-intel-pt.txt:
$ echo -n "Hello" | od -t x8
0000000 0000006f6c6c6548
0000005
$ perf record -e intel_pt//u ./eg_ptw 0x0000006f6c6c6548
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.016 MB perf.data ]
$ perf script --itrace=ew intel-pt-events.py
Intel PT Branch Trace, Power Events, Event Trace and PTWRITE
Switch In 38524/38524 [001] 24166.044995916 0/0
eg_ptw 38524/38524 [001] 24166.045380004 ptwrite jmp IP: 0 payload: 0x6f6c6c6548 Hello 56532c7ce196 perf_emulate_ptwrite+0x16 (/home/ahunter/git/work/eg_ptw)
End
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220509152400.376613-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It can be convenient to put a string value into a ptwrite payload as
a quick and easy way to identify what is being printed.
To make that useful, if the Intel ptwrite payload value contains only
printable ASCII characters padded with NULLs, then print it also as a
string.
Using the example program from the "Emulated PTWRITE" section of
tools/perf/Documentation/perf-intel-pt.txt:
$ echo -n "Hello" | od -t x8
0000000 0000006f6c6c6548
0000005
$ perf record -e intel_pt//u ./eg_ptw 0x0000006f6c6c6548
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.016 MB perf.data ]
$ perf script --itrace=ew
eg_ptw 35563 [005] 18256.087338: ptwrite: IP: 0 payload: 0x6f6c6c6548 Hello 55e764db5196 perf_emulate_ptwrite+0x16 (/home/user/eg_ptw)
$
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220509152400.376613-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
