The GG.0 and GG.1 GPIOs serve as CLKREQ and RST pins, respectively, for
PCIe controller 5 on Tegra194. When this controller is configured in
endpoint mode, these pins need to be used as GPIOs by the PCIe endpoint
driver. Typically the mode programming of these pins (GPIO vs. SFIO) is
performed by early boot firmware to ensure that the configuration is
consistent.
However, the GG.0 and GG.1 pins are part of a special power partition
that is not enabled during early boot, and hence the early boot firmware
cannot program these pins to be GPIOs (they are SFIO by default). Adding
them as pin ranges for the pin controller allows the pin controller to
be involved when these pins are requested as GPIOs and allows the proper
programming to take place.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20200319122737.3063291-4-thierry.reding@gmail.com
Tested-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
... in order to fix a -Wmissing-ptototypes warning:
arch/x86/platform/efi/quirks.c:245:13: warning:
no previous prototype for ‘efi_arch_mem_reserve’ [-Wmissing-prototypes] \
void __init efi_arch_mem_reserve(phys_addr_t addr, u64 size)
Signed-off-by: Benjamin Thiel <b.thiel@posteo.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200326135041.3264-1-b.thiel@posteo.de
Some unrelated changes in the iommu code caused a new warning to
appear in the arm-smmu driver:
CC drivers/iommu/arm-smmu.o
drivers/iommu/arm-smmu.c: In function 'arm_smmu_add_device':
drivers/iommu/arm-smmu.c:1441:2: warning: 'smmu' may be used uninitialized in this function [-Wmaybe-uninitialized]
arm_smmu_rpm_put(smmu);
^~~~~~~~~~~~~~~~~~~~~~
The warning is a false positive, but initialize the variable to NULL
to get rid of it.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Will Deacon <will@kernel.org> # arm-smmu
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20200326150841.10083-8-joro@8bytes.org
We don't currently support IOMMUs with a page granule larger than the
system page size. The IOVA allocator has a BUG_ON() in this case, and
VFIO has a WARN_ON().
Removing these obstacles ranges doesn't seem possible without major
changes to the DMA API and VFIO. Some callers of iommu_map(), for
example, want to map multiple page-aligned regions adjacent to each
others for scatter-gather purposes. Even in simple DMA API uses, a call
to dma_map_page() would let the endpoint access neighbouring memory. And
VFIO users cannot ensure that their virtual address buffer is physically
contiguous at the IOMMU granule.
Rather than triggering the IOVA BUG_ON() on mismatched page sizes, abort
the vdomain finalise() with an error message. We could simply abort the
viommu probe(), but an upcoming extension to virtio-iommu will allow
setting different page masks for each endpoint.
Reported-by: Bharat Bhushan <bbhushan2@marvell.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Bharat Bhushan <bbhushan2@marvell.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20200326093558.2641019-4-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Calling viommu_domain_free() on a domain that hasn't been finalised (not
attached to any device, for example) can currently cause an Oops,
because we attempt to call ida_free() on ID 0, which may either be
unallocated or used by another domain.
Only initialise the vdomain->viommu pointer, which denotes a finalised
domain, at the end of a successful viommu_domain_finalise().
Fixes: edcd69ab9a ("iommu: Add virtio-iommu driver")
Reported-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20200326093558.2641019-3-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
We copied the virtio_iommu_config from the virtio-iommu specification,
which declares the fields using little-endian annotations (for example
le32). Unfortunately this causes sparse to warn about comparison between
little- and cpu-endian, because of the typecheck() in virtio_cread():
drivers/iommu/virtio-iommu.c:1024:9: sparse: sparse: incompatible types in comparison expression (different base types):
drivers/iommu/virtio-iommu.c:1024:9: sparse: restricted __le64 *
drivers/iommu/virtio-iommu.c:1024:9: sparse: unsigned long long *
drivers/iommu/virtio-iommu.c:1036:9: sparse: sparse: incompatible types in comparison expression (different base types):
drivers/iommu/virtio-iommu.c:1036:9: sparse: restricted __le64 *
drivers/iommu/virtio-iommu.c:1036:9: sparse: unsigned long long *
drivers/iommu/virtio-iommu.c:1040:9: sparse: sparse: incompatible types in comparison expression (different base types):
drivers/iommu/virtio-iommu.c:1040:9: sparse: restricted __le64 *
drivers/iommu/virtio-iommu.c:1040:9: sparse: unsigned long long *
drivers/iommu/virtio-iommu.c:1044:9: sparse: sparse: incompatible types in comparison expression (different base types):
drivers/iommu/virtio-iommu.c:1044:9: sparse: restricted __le32 *
drivers/iommu/virtio-iommu.c:1044:9: sparse: unsigned int *
drivers/iommu/virtio-iommu.c:1048:9: sparse: sparse: incompatible types in comparison expression (different base types):
drivers/iommu/virtio-iommu.c:1048:9: sparse: restricted __le32 *
drivers/iommu/virtio-iommu.c:1048:9: sparse: unsigned int *
drivers/iommu/virtio-iommu.c:1052:9: sparse: sparse: incompatible types in comparison expression (different base types):
drivers/iommu/virtio-iommu.c:1052:9: sparse: restricted __le32 *
drivers/iommu/virtio-iommu.c:1052:9: sparse: unsigned int *
Although virtio_cread() does convert virtio-endian (in our case
little-endian) to cpu-endian, the typecheck() needs the two arguments to
have the same endianness. Do as UAPI headers of other virtio devices do,
and remove the endian annotation from the device config.
Even though we change the UAPI this shouldn't cause any regression since
QEMU, the existing implementation of virtio-iommu that uses this header,
already removes the annotations when importing headers.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20200326093558.2641019-2-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
IOASID code is needed by VT-d scalable mode for PASID allocation.
Add explicit dependency such that IOASID is built-in whenever Intel
IOMMU is enabled.
Otherwise, aux domain code will fail when IOMMU is built-in and IOASID
is compiled as a module.
Fixes: 59a623374d ("iommu/vt-d: Replace Intel specific PASID allocator with IOASID")
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Move canonical address check before mmget_not_zero() to avoid mm
reference leak.
Fixes: 9d8c3af316 ("iommu/vt-d: IOMMU Page Request needs to check if address is canonical.")
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
... in order to fix a -Wmissing-prototypes warning:
arch/x86/platform/uv/tlb_uv.c:1275:6: warning:
no previous prototype for ‘uv_bau_message_interrupt’ [-Wmissing-prototypes] \
void uv_bau_message_interrupt(struct pt_regs *regs)
Signed-off-by: Benjamin Thiel <b.thiel@posteo.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200327072621.2255-1-b.thiel@posteo.de
Currently drivers using drm_fbdev_generic_setup() end up with a single
empty aperture in their fb_info struct.
Not having the proper info in the apertures list causes
register_framebuffer to not remove conflicting framebuffers,
which some drivers currently workaround by manually calling
drm_fb_helper_remove_conflicting_pci_framebuffers().
Add a TODO as a reminder that we need to fix this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200326151009.102377-1-hdegoede@redhat.com
Add an RTC driver for the RTC device on Ricoh MFD RC5T619,
which is implemented as a variant of RN5T618.
rtc-range output:
Testing 2000-02-28 23:59:59.
OK
Testing 2038-01-19 03:14:07.
OK
Testing 2069-12-31 23:59:59.
OK
Testing 2099-12-31 23:59:59.
KO RTC_RD_TIME returned 22 (line 138)
Testing 2100-02-28 23:59:59.
KO RTC_SET_TIME returned 34 (line 122)
Testing 2106-02-07 06:28:15.
KO RTC_SET_TIME returned 34 (line 122)
Testing 2262-04-11 23:47:16.
KO RTC_SET_TIME returned 34 (line 122)
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Since the RC5T619 has a RTC, use a separate subdevice list for that.
The ADC should be the same as in the RN5T618, according to drivers
in the wild, but since it is not tested, the ADC is only added for
the RC5T619.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Defines for some RTC related registers were missing, also
they were not included in the volatile register list
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This adds support for IRQ handling in the RC5T619 which is required
for properly implementing subdevices like RTC.
For now only definitions for the variant RC5T619 are included.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
A user doesn't necessarily want to wait for all the requested data to
be available, since the waiting time for each request is unbounded.
The new method permits sending one read request at a time and getting
the response ASAP, allowing to use 9pnet with synthetic file systems
representing arbitrary data streams.
Link: http://lkml.kernel.org/r/20200205204053.12751-1-l29ah@cock.li
Signed-off-by: Sergey Alirzaev <l29ah@cock.li>
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Set up qdio_irq->cdev right when the qdio_irq struct is allocated, so
that all subsequent code can rely on this pointer.
Then convert two helper functions to not pass a cdev parameter around.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
As s390 no longer supports ARCH_HIBERNATION_POSSIBLE, drop the unused
pm ops from the ccwgroup bus driver.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The s390 power management support has been removed. So the
api registration and the suspend and resume callbacks and
all the code related to this for the ap bus and the ap drivers
is removed with this patch.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
