According to the API, if memory allocation wasn't possible, or some
other error occurs, asprintf will return -1, and the contents of strp
below are undefined.
int asprintf(char **strp, const char *fmt, ...);
This patch takes care of return value of asprintf to make it less error
prone and prevent the following build warning.
ignoring return value of ‘asprintf’, declared with attribute warn_unused_result [-Wunused-result]
Signed-off-by: He Zhe <zhe.he@windriver.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Cc: hewenliang4@huawei.com
Link: http://lore.kernel.org/lkml/1582163930-233692-1-git-send-email-zhe.he@windriver.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When it is not possible for a non-privilege perf command to monitor at
the kernel level (:k), the fallback code forces a :u. That works if the
event was previously monitoring both levels. But if the event was
already constrained to kernel only, then it does not make sense to
restrict it to user only.
Given the code works by exclusion, a kernel only event would have:
attr->exclude_user = 1
The fallback code would add:
attr->exclude_kernel = 1
In the end the end would not monitor in either the user level or kernel
level. In other words, it would count nothing.
An event programmed to monitor kernel only cannot be switched to user
only without seriously warning the user.
This patch forces an error in this case to make it clear the request
cannot really be satisfied.
Behavior with paranoid 1:
$ sudo bash -c "echo 1 > /proc/sys/kernel/perf_event_paranoid"
$ perf stat -e cycles:k sleep 1
Performance counter stats for 'sleep 1':
1,520,413 cycles:k
1.002361664 seconds time elapsed
0.002480000 seconds user
0.000000000 seconds sys
Old behavior with paranoid 2:
$ sudo bash -c "echo 2 > /proc/sys/kernel/perf_event_paranoid"
$ perf stat -e cycles:k sleep 1
Performance counter stats for 'sleep 1':
0 cycles:ku
1.002358127 seconds time elapsed
0.002384000 seconds user
0.000000000 seconds sys
New behavior with paranoid 2:
$ sudo bash -c "echo 2 > /proc/sys/kernel/perf_event_paranoid"
$ perf stat -e cycles:k sleep 1
Error:
You may not have permission to collect stats.
Consider tweaking /proc/sys/kernel/perf_event_paranoid,
which controls use of the performance events system by
unprivileged users (without CAP_PERFMON or CAP_SYS_ADMIN).
The current value is 2:
-1: Allow use of (almost) all events by all users
Ignore mlock limit after perf_event_mlock_kb without CAP_IPC_LOCK
>= 0: Disallow ftrace function tracepoint by users without CAP_PERFMON or CAP_SYS_ADMIN
Disallow raw tracepoint access by users without CAP_SYS_PERFMON or CAP_SYS_ADMIN
>= 1: Disallow CPU event access by users without CAP_PERFMON or CAP_SYS_ADMIN
>= 2: Disallow kernel profiling by users without CAP_PERFMON or CAP_SYS_ADMIN
To make this setting permanent, edit /etc/sysctl.conf too, e.g.:
kernel.perf_event_paranoid = -1
v2 of this patch addresses the review feedback from jolsa@redhat.com.
Signed-off-by: Stephane Eranian <eranian@google.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200414161550.225588-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When AUX area events are used in sampling mode, they must be the group
leader, but the group leader is also used for leader-sampling. However,
it is not desirable to use an AUX area event as the leader for
leader-sampling, because it doesn't have any samples of its own. To support
leader-sampling with AUX area events, use the 2nd event of the group as the
"leader" for the purposes of leader-sampling.
Example:
# perf record --kcore --aux-sample -e '{intel_pt//,cycles,instructions}:S' -c 10000 uname
[ perf record: Woken up 3 times to write data ]
[ perf record: Captured and wrote 0.786 MB perf.data ]
# perf report
Samples: 380 of events 'anon group { cycles, instructions }', Event count (approx.): 3026164
Children Self Command Shared Object Symbol
+ 38.76% 42.65% 0.00% 0.00% uname [kernel.kallsyms] [k] __x86_indirect_thunk_rax
+ 35.82% 31.33% 0.00% 0.00% uname ld-2.28.so [.] _dl_start_user
+ 34.29% 29.74% 0.55% 0.47% uname ld-2.28.so [.] _dl_start
+ 33.73% 28.62% 1.60% 0.97% uname ld-2.28.so [.] dl_main
+ 33.19% 29.04% 0.52% 0.32% uname ld-2.28.so [.] _dl_sysdep_start
+ 27.83% 33.74% 0.00% 0.00% uname [kernel.kallsyms] [k] do_syscall_64
+ 26.76% 33.29% 0.00% 0.00% uname [kernel.kallsyms] [k] entry_SYSCALL_64_after_hwframe
+ 23.78% 20.33% 5.97% 5.25% uname [kernel.kallsyms] [k] page_fault
+ 23.18% 24.60% 0.00% 0.00% uname libc-2.28.so [.] __libc_start_main
+ 22.64% 24.37% 0.00% 0.00% uname uname [.] _start
+ 21.04% 23.27% 0.00% 0.00% uname uname [.] main
+ 19.48% 18.08% 3.72% 3.64% uname ld-2.28.so [.] _dl_relocate_object
+ 19.47% 21.81% 0.00% 0.00% uname libc-2.28.so [.] setlocale
+ 19.44% 21.56% 0.52% 0.61% uname libc-2.28.so [.] _nl_find_locale
+ 17.87% 19.66% 0.00% 0.00% uname libc-2.28.so [.] _nl_load_locale_from_archive
+ 15.71% 13.73% 0.53% 0.52% uname [kernel.kallsyms] [k] do_page_fault
+ 15.18% 13.21% 1.03% 0.68% uname [kernel.kallsyms] [k] handle_mm_fault
+ 14.15% 12.53% 1.01% 1.12% uname [kernel.kallsyms] [k] __handle_mm_fault
+ 12.03% 9.67% 0.54% 0.32% uname ld-2.28.so [.] _dl_map_object
+ 10.55% 8.48% 0.00% 0.00% uname ld-2.28.so [.] openaux
+ 10.55% 20.20% 0.52% 0.61% uname libc-2.28.so [.] __run_exit_handlers
Comnmitter notes:
Fixed up this problem:
util/record.c: In function ‘perf_evlist__config’:
util/record.c:256:3: error: too few arguments to function ‘perf_evsel__config_leader_sampling’
256 | perf_evsel__config_leader_sampling(evsel);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
util/record.c:190:13: note: declared here
190 | static void perf_evsel__config_leader_sampling(struct evsel *evsel,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20200401101613.6201-17-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move leader-sampling configuration in preparation for adding support for
leader sampling with AUX area events.
Committer notes:
It only makes sense when configuring an evsel that is part of an evlist,
so the only case where it is called outside perf_evlist__config(), in
some 'perf test' entry, is safe, and even there we should just use
perf_evlist__config(), but since in that case we have just one evsel in
the evlist, it is equivalent.
Also fixed up this problem:
util/record.c: In function ‘perf_evlist__config’:
util/record.c:223:3: error: too many arguments to function ‘perf_evsel__config_leader_sampling’
223 | perf_evsel__config_leader_sampling(evsel, evlist);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
util/record.c:170:13: note: declared here
170 | static void perf_evsel__config_leader_sampling(struct evsel *evsel)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20200401101613.6201-14-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This change doesn't affect existing code. Inner namespace indentation
can lead to a lot of indentation in the case of anonymous namespaces and
the like, impeding readability. Of the clang-format builtin styles
LLVM, Google, Chromium and Mozilla use None while WebKit uses Inner.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
The Intel Software Developers' Manual erroneously listed bit 5 of the
IA32_CORE_CAPABILITIES register as an architectural feature. It is not.
Features enumerated by IA32_CORE_CAPABILITIES are model specific and
implementation details may vary in different cpu models. Thus it is only
safe to trust features after checking the CPU model.
Icelake client and server models are known to implement the split lock
detect feature even though they don't enumerate IA32_CORE_CAPABILITIES
[ tglx: Use switch() for readability and massage comments ]
Fixes: 6650cdd9a8 ("x86/split_lock: Enable split lock detection by kernel")
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200416205754.21177-3-tony.luck@intel.com
free_more_memory func has been completely removed in commit bc48f001de
("buffer: eliminate the need to call free_more_memory() in __getblk_slow()")
So comment and `WB_REASON_FREE_MORE_MEM` reason about free_more_memory
are no longer needed.
Fixes: bc48f001de ("buffer: eliminate the need to call free_more_memory() in __getblk_slow()")
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Right now dp.regs.dp_tp_ctl/status are only set during the encoder
pre_enable() hook, what is causing all reads and writes to those
registers to go to offset 0x0 before pre_enable() is executed.
So if i915 takes the BIOS state and don't do a modeset any following
link retraing will fail.
In the case that i915 needs to do a modeset, the DDI disable sequence
will write to a wrong register not disabling DP 'Transport Enable' in
DP_TP_CTL, making a HDMI modeset in the same port/transcoder to
not light up the monitor.
So here for GENs older than 12, that have those registers fixed at
port offset range it is loading at encoder/port init while for GEN12
it will keep setting it at encoder pre_enable() and during HW state
readout.
Fixes: 4444df6e20 ("drm/i915/tgl: move DP_TP_* to transcoder")
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414230442.262092-1-jose.souza@intel.com
TC ports can enter in TCCOLD to save power and is required to request
to PCODE to exit this state before use or read to TC registers.
For TGL there is a new MBOX command to do that with a parameter to ask
PCODE to exit and block TCCOLD entry or unblock TCCOLD entry.
So adding a new power domain to reuse the refcount and only allow
TC cold when all TC ports are not in use.
v2:
- fixed missing case in intel_display_power_domain_str()
- moved tgl_tc_cold_request to intel_display_power.c
- renamed TGL_TC_COLD_OFF to TGL_TC_COLD_OFF_POWER_DOMAINS
- added all TC and TBT aux power domains to
TGL_TC_COLD_OFF_POWER_DOMAINS
v3:
- added one msec sleep when PCODE returns -EAGAIN
- added timeout of 5msec to not loop forever if
sandybridge_pcode_write_timeout() keeps returning -EAGAIN
v4:
- Made failure to block or unblock TC cold a error
- removed 5msec timeout, instead giving PCODE 1msec by up 3 times to
recover from the internal error
v5:
- only sleeping 1msec when ret is -EAGAIN
BSpec: 49294
Cc: Imre Deak <imre.deak@intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414194956.164323-6-jose.souza@intel.com
This is required for legacy/static TC ports as IOM is not aware of
the connection and will not trigger the TC cold exit.
Just request PCODE to exit TCCOLD is not enough as it could enter
again before driver makes use of the port, to prevent it BSpec states
that aux powerwell should be held.
So here embedding the TC cold exit sequence into ICL aux enable,
it will enable aux and then request TC cold to exit.
The TC cold block(exit and aux hold) and unblock was added to some
exported TC functions for the others and to access PHY registers,
callers should enable and keep aux powerwell enabled during access.
Also adding TC cold check and warnig in tc_port_load_fia_params() as
at this point of the driver initialization we can't request power
wells, if we get this warning we will need to figure out how to handle
it.
v2:
- moved ICL TC cold exit function to intel_display_power
- using dig_port->tc_legacy_port to only execute sequences for legacy
ports, hopefully VBTs will have this right
- fixed check to call _hsw_power_well_continue_enable()
- calling _hsw_power_well_continue_enable() unconditionally in
icl_tc_phy_aux_power_well_enable(), if needed we will surpress timeout
warnings of TC legacy ports
- only blocking TC cold around fia access
v3:
- added timeout of 5msec to not loop forever if
sandybridge_pcode_write_timeout() keeps returning -EAGAIN
returning -EAGAIN in in icl_tc_cold_exit()
- removed leftover tc_cold_wakeref
- added one msec sleep when PCODE returns -EAGAIN
v4:
- removed 5msec timeout, instead giving 1msec to whoever is using
PCODE to finish it up to 3 times
- added a comment about turn TC cold exit failure as a error in future
BSpec: 21750
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1296
Cc: Imre Deak <imre.deak@intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414194956.164323-4-jose.souza@intel.com
The MFW may make a call to qed and then to qedf for protocol statistics
while the function is still probing. If this happens it's possible that
some members of the struct qedf_ctx may not be fully initialized which can
result in a NULL pointer dereference or general protection fault.
To prevent this, add a new flag call QEDF_PROBING and set it when the
__qedf_probe() function is active. Then in the qedf_get_protocol_tlv_data()
function we can check if the function is still probing and return
immediantely before any uninitialized structures can be touched.
Link: https://lore.kernel.org/r/20200416084314.18851-9-skashyap@marvell.com
Signed-off-by: Chad Dupuis <cdupuis@marvell.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Moving the code to return the digital port of the aux channel also
removing the intel_phy_is_tc() to make it generic.
digital_port will be needed in icl_tc_phy_aux_power_well_enable()
so adding it as a parameter to icl_tc_port_assert_ref_held().
While at at removing the duplicated call to icl_tc_phy_aux_ch() in
icl_tc_port_assert_ref_held().
v2:
- fixed build when DRM_I915_DEBUG_RUNTIME_PM is not set
- moved to before hsw_wait_for_power_well_enable() as it will be
needed by hsw_wait_for_power_well_enable() in a future patch
v4:
- fixed action of if (!dig_port), continue instead of return
Cc: You-Sheng Yang <vicamo@gmail.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Tested-by: You-Sheng Yang <vicamo.yang@canonical.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414194956.164323-1-jose.souza@intel.com
If a port is brought down for an extended period of time, the fipvlan
counter gets exhausted and the driver will fall back to default VLAN 1002
and call fcoe_ctlr_link_up to log in. However, the switch will discard the
FLOGI attempt because the VLAN is now different.
Keep track of the number of FLOGI attempts and if a threshold of
QEDF_FLOGI_RETRY_CNT is exceeded, perform a context soft reset.
Link: https://lore.kernel.org/r/20200416084314.18851-2-skashyap@marvell.com
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Initialize thermal controller fields in the PowerPlay table for Hawaii
GPUs, so that fan speeds are reported.
Signed-off-by: Sandeep Raghuraman <sandy.8925@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement a new, more space-efficient way of storing filename
transitions in the binary policy. The internal structures have already
been converted to this new representation; this patch just implements
reading/writing an equivalent represntation from/to the binary policy.
This new format reduces the size of Fedora policy from 7.6 MB to only
3.3 MB (with policy optimization enabled in both cases). With the
unconfined module disabled, the size is reduced from 3.3 MB to 2.4 MB.
The time to load policy into kernel is also shorter with the new format.
On Fedora Rawhide x86_64 it dropped from 157 ms to 106 ms; without the
unconfined module from 115 ms to 105 ms.
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Pull documentation fixes from Jonathan Corbet:
"A handful of fixes for reasonably obnoxious documentation issues"
* tag 'docs-fixes' of git://git.lwn.net/linux:
scripts: documentation-file-ref-check: Add line break before exit
scripts/kernel-doc: Add missing close-paren in c:function directives
docs: admin-guide: merge sections for the kernel.modprobe sysctl
docs: timekeeping: Use correct prototype for deprecated functions
Now that context hash computation no longer depends on policydb, we can
simplify things by moving the context hashing completely under sidtab.
The hash is still cached in sidtab entries, but not for the in-flight
context structures.
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Always hashing the string representation is inefficient. Just hash the
contents of the structure directly (using jhash). If the context is
invalid (str & len are set), then hash the string as before, otherwise
hash the structured data.
Since the context hashing function is now faster (about 10 times), this
patch decreases the overhead of security_transition_sid(), which is
called from many hooks.
The jhash function seemed as a good choice, since it is used as the
default hashing algorithm in rhashtable.
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Jeff Vander Stoep <jeffv@google.com>
Tested-by: Jeff Vander Stoep <jeffv@google.com>
[PM: fixed some spelling errors in the comments pointed out by JVS]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Currently, they are stored in a linked list, which adds significant
overhead to security_transition_sid(). On Fedora, with 428 role
transitions in policy, converting this list to a hash table cuts down
its run time by about 50%. This was measured by running 'stress-ng --msg
1 --msg-ops 100000' under perf with and without this patch.
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Pull proc fix from Eric Biederman:
"While running syzbot happened to spot one more oversight in my rework
of proc_flush_task.
The fields proc_self and proc_thread_self were not being reinitialized
when proc was unmounted, which could cause problems if the mount of
proc fails"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
proc: Handle umounts cleanly
