comedi_open() invokes comedi_dev_get_from_minor(), which returns a
reference of the COMEDI device to "dev" with increased refcount.
When comedi_open() returns, "dev" becomes invalid, so the refcount
should be decreased to keep refcount balanced.
The reference counting issue happens in one exception handling path of
comedi_open(). When "cfp" allocation is failed, the refcnt increased by
comedi_dev_get_from_minor() is not decreased, causing a refcnt leak.
Fix this issue by calling comedi_dev_put() on this error path when "cfp"
allocation is failed.
Fixes: 20f083c075 ("staging: comedi: prepare support for per-file read and write subdevices")
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/1587361459-83622-1-git-send-email-xiyuyang19@fudan.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The problem is that the group key was saved as VNT_KEY_DEFAULTKEY
was over written by the VNT_KEY_GROUP_ADDRESS index.
mac80211 could not clear the mac_addr in the default key.
The VNT_KEY_DEFAULTKEY is not necesscary so remove it and set as
VNT_KEY_GROUP_ADDRESS.
mac80211 can clear any key using vnt_mac_disable_keyentry.
Fixes: f9ef05ce13 ("staging: vt6656: Fix pairwise key for non station modes")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Link: https://lore.kernel.org/r/da2f7e7f-1658-1320-6eee-0f55770ca391@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace the for loops of the vnt_update_top_rates function by the fls
function.
The purpose of the two for loops is to find the most significant bit set
in a range of bits. So, they can be replace by the fls function (find
last set) with a previous mask to define the range.
This way avoid the iteration over unnecessary for loops.
The header "linux/bits.h" can be remove as it is included in the header
"linux/bitops.h".
Signed-off-by: Oscar Carter <oscar.carter@gmx.com>
Link: https://lore.kernel.org/r/20200420155246.4925-1-oscar.carter@gmx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace the for loop by a ternary operator whose condition is an AND
bitmask against the priv->basic_rates variable.
The purpose of the for loop was to check if any of bits from RATE_54M to
RATE_6M was set, but it's not necessary to check every individual bit.
The same result can be achieved using only one single mask which
comprises all the commented bits.
This way avoid the iteration over an unnecessary for loop.
Also change the return type to bool because it's the type that this
function returns.
Signed-off-by: Oscar Carter <oscar.carter@gmx.com>
Link: https://lore.kernel.org/r/20200418134553.6415-1-oscar.carter@gmx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gasket_sysfs_register_store() invokes get_mapping(), which returns a
reference of the specified gasket_sysfs_mapping object to "mapping" with
increased refcnt.
When gasket_sysfs_register_store() returns, local variable "mapping"
becomes invalid, so the refcount should be decreased to keep refcount
balanced.
The reference counting issue happens in one exception handling path of
gasket_sysfs_register_store(). When gasket_dev is NULL, the function
forgets to decrease the refcnt increased by get_mapping(), causing a
refcnt leak.
Fix this issue by calling put_mapping() when gasket_dev is NULL.
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Link: https://lore.kernel.org/r/1587618941-13718-1-git-send-email-xiyuyang19@fudan.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gasket_sysfs_put_attr() invokes get_mapping(), which returns a reference
of the specified gasket_sysfs_mapping object to "mapping" with increased
refcnt.
When gasket_sysfs_put_attr() returns, local variable "mapping" becomes
invalid, so the refcount should be decreased to keep refcount balanced.
The reference counting issue happens in one path of
gasket_sysfs_put_attr(). When mapping attribute is unknown, the function
forgets to decrease the refcnt increased by get_mapping(), causing a
refcnt leak.
Fix this issue by calling put_mapping() when put attribute fails due to
unknown attribute.
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Link: https://lore.kernel.org/r/1587618895-13660-1-git-send-email-xiyuyang19@fudan.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the following gcc warning:
drivers/staging/rtl8723bs/hal/hal_btcoex.c:45:26: warning: ‘ioStaString’
defined but not used [-Wunused-const-variable=]
static const char *const ioStaString[] = {
^~~~~~~~~~~
drivers/staging/rtl8723bs/hal/hal_btcoex.c:38:26: warning:
‘h2cStaString’ defined but not used [-Wunused-const-variable=]
static const char *const h2cStaString[] = {
^~~~~~~~~~~~
drivers/staging/rtl8723bs/hal/hal_btcoex.c:33:26: warning:
‘BtLinkRoleString’ defined but not used [-Wunused-const-variable=]
static const char *const BtLinkRoleString[] = {
^~~~~~~~~~~~~~~~
drivers/staging/rtl8723bs/hal/hal_btcoex.c:23:26: warning:
‘BtSpecString’ defined but not used [-Wunused-const-variable=]
static const char *const BtSpecString[] = {
^~~~~~~~~~~~
drivers/staging/rtl8723bs/hal/hal_btcoex.c:15:26: warning:
‘BtProfileString’ defined but not used [-Wunused-const-variable=]
static const char *const BtProfileString[] = {
^~~~~~~~~~~~~~~
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20200417073310.40893-1-yanaijie@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Current code skip some configuration during joining an IBSS network.
Indeed, it seems that this configuration is not used in IBSS. However,
it would be harmless to set them. In add, we would prefer to keep
association processes for ad-hoc and managed networks the closest as
possible. It also ensures the values of internal parameters of the
firmware.
Therefore, apply them unconditionally.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200420160311.57323-6-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The firmware is able to filter beacons and send a notification if one or
multiple beacons are not received. Note that it send this notification
only once. Only if it receive beacons gain, it send a new notification.
Currently, the driver handle the connection loss itself (see
wfx_cqm_bssloss_sm()). It send null frames and watch the answers.
This patch fixes all this mess:
- settle firmware to send a notification on the first beacon loss
- call ieee80211_beacon_loss() and let mac80211 handle all the process
- since we do have notification for each beacon loss, add a period
task that call ieee80211_beacon_loss() until we receive "REGAIN"
notification.
Thus, we can drop the ugly wfx_cqm_bssloss_sm() and
wfx_bss_params_work().
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200420160311.57323-3-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
HD-audio codec driver applies a tricky procedure to forcibly perform
the runtime resume by mimicking the usage count even if the device has
been runtime-suspended beforehand. This was needed to assure to
trigger the jack detection update after the system resume.
And recently we also applied the similar logic to the HD-audio
controller side. However this seems leading to some inconsistency,
and eventually PCI controller gets screwed up.
This patch is an attempt to fix and clean up those behavior: instead
of the tricky runtime resume procedure, the existing jackpoll work is
scheduled when such a forced codec resume is required. The jackpoll
work will power up the codec, and this alone should suffice for the
jack status update in usual cases. If the extra polling is requested
(by checking codec->jackpoll_interval), the manual update is invoked
after that, and the codec is powered down again.
Also, we filter the spurious wake up of the codec from the controller
runtime resume by checking codec->relaxed_resume flag. If this flag
is set, basically we don't need to wake up explicitly, but it's
supposed to be done via the audio component notifier.
Fixes: c4c8dd6ef8 ("ALSA: hda: Skip controller resume if not needed")
Link: https://lore.kernel.org/r/20200422203744.26299-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Enable CPU opp tables for Orange Pi 3.
This needs to change the CPU regulator max voltage to fit
the OPP table.
Also add the ramp-delay information to avoid any out of spec
running as the regulator is slower at reaching the voltage
requested compare to the PLL reaching the frequency.
There is no such information for AXP805 but similar PMIC (AXP813)
has a DVM (Dynamic Voltage scaling Management) ramp rate equal
to 2500uV/us.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Enable CPU opp tables for Beelink GS1.
This needs to change the CPU regulator max voltage to fit
the OPP table.
Also add the ramp-delay information to avoid any out of spec
running as the regulator is slower at reaching the voltage
requested compare to the PLL reaching the frequency.
There is no such information for AXP805 but similar PMIC (AXP813)
has a DVM (Dynamic Voltage scaling Management) ramp rate equal
to 2500uV/us.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Add an Operating Performance Points table for the CPU cores to
enable Dynamic Voltage & Frequency Scaling on the H6.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
This enables passive cooling by down-regulating CPU voltage
and frequency.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Jonathan writes:
First set of new IIO device support, features and cleanup for the 5.8 cycle
Usual mix of new drivers, new support in old drivers and lots of minor
cleanup. Yaml conversions also continue to trickle in (plenty more to go!)
New device support
* ad7476
- Add ad7091 support (ID only)
* ad9467
- New driver for this 200/250 MSPS adi-axi-adc and SPI attached ADC.
* adi-axi-adc
- New driver to support ADIs generic AXI ADC IP core, used to provide
high speed interfaces to ADCs (JESD204B/C or parallel interfaces). Usually
paired with a device using a slow configuration interface (spi etc)
Includes DT bindings and some fixes for fpga headers.
* bmg160
- Add support for BMI088 (ID only)
* max1241
- New driver for this ADC.
* st_sensors
- Add support for LIS2HH12 accelerometer
* sx9310
- New driver supporting sx9310 and sx9311 proximity sensors.
Yaml DT binding conversions
* rockchip-saradc (including adding some missing parts)
* stm32-dac
* tsl2563
* vcnl4000
Features
* st_lsm6dsx
- Add LIS3MDL as a possible sensor hub device.
* vcnl4000
- Add new concept of near level (from DT) to provide to userspace which
often needs to have some calibrated concept of 'near'.
Cleanups, minor fixes etc.
* core
- Use snprintf for functions where strings are built and there is
potential for overflow.
- Correct docs to indicate mlock should not be used directly by drivers.
- Fix up accidental dropping of a patch to use bitmap_zalloc.
- Stop allowing enabling of buffers with no channels enabled.
- Drop unused 'stufftoread' from iio_buffer.
- Drop scan_el_attrs form iio_buffer as unused.
- Reorder sanity checks in __iio_device_register to fail earlier.
- Drop all the devm_ runregister / free functions from IIO as they
were never used and encourage poor design.
* dma-buffer
- Tidy up includes.
* dma-engine-buffer
- Provide dev-managed allocator.
- Fix an issue with printing a size_t
* cross subsystem (kxsd9, bmg160, mpu3050, bmi160, mpu6050, bmc150)
- Replace some unnecessary casts of error ptrs and whilst there.
use the %pe printf parameter to print them in a more useful fashion.
* cross subsystem
- Drop casts in calls to regmap_bulk_read as they make no sense.
- Use devm_platform_ioremap_resource to reduce boilerplate.
- Fix typos in Analog Devices.
* counters/104-quad
- Add Syed Nayyar Waris as an additional maintainer.
* ad7476
- Generate CONVST signal internally rather than requiring external
trigger. Add sysfs read back as can now do so.
- use devm_add_action_or_reset to tidy up error and remove handling.
* ad7793
- Switch to read_avail from explicit attribute. Mostly done to avoid
confusing people with a - sign (without surounding spaces) that
was correct but checkpatch didn't like.
* adis library
- Add missing newlines at end of error messages.
* adis16400
- Use DEFINE_DEBUGS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTR.
* adis16460
- Use DEFINE_DEBUGS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTR.
* ad_sigma_delta
- Move some channel definitions into individual drivers to avoid
having to deal with complex options.
* ak8974
- Silence an error on deffered probe.
* bmp280
- Harden against IRQ before registration.
- Convert to read_avail instead of opencoding the equivalent.
- Explicitly mark GPIO as optional.
- Cleanup casts.
- Remove line breaks from strings.
* htts221
- Replace direct access to platform_data with dev_get_platdata().
- Use device properties rather than device tree ones to allow ACPI
probing.
- Casting cleanups.
* intel_mrfld_adc
- Don't use unaligned accessor for aligned data.
* isl29125
- Reorder buer pre and post hooks to allow for coming core rework.
* ltc2983
- Remove comp to bool.
* max1363
- Stop using mlock from the iio_dev directly in favour of a local lock
with clearly defined scope.
* max30100
- Use generic device properties to allow ACPI probe.
* mpu6050
- Convert to i2c_new_client_device.
- Add debugfs register access.
* st_lsm6dsx
- Provide means of configuring full scale on slave device if supported.
- Drop include of st_sensors header to get one value. Its not otherwise
used by this driver.
* st-sensors
- Replace direct access to platform_data with dev_get_platdata().
- Casting cleanups.
- Avoid splitting strings.
* st_uvis25
- Casting cleanups.
* tsl2563
- Typo fix.
* tsl2772
- scnprintf in a non obvious string building usecase. Note also 'fixes'
a wrong calculation of remaining space that couldn't actually cause
any trouble as there was lots of room.
* xilinx-xadc
- Fix Lars-Peter spelling his own name wrong :) + additional typos.
* tag 'iio-for-5.8a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (101 commits)
iio: magnetometer: ak8974: Silence deferred-probe error
Documentation: ABI: document IIO in_proximity_nearlevel file
iio: vcnl4000: Export near level property for proximity sensor
dt-bindings: iio: light: vcnl4000: Add proximity-near-level
dt-bindings: iio: Introduce common properties for iio sensors
dt-bindings: iio: vcnl4000: convert bindings to YAML format
iio: Fix misspellings of "Analog Devices"
iio: light: isl29125: fix iio_triggered_buffer_{predisable,postenable} positions
iio: adc: fsl-imx25-gcq: Use devm_platform_ioremap_resource
iio: adc: at91-adc: Use devm_platform_ioremap_resource
iio: adc: sun4i-gpadc-iio: Use devm_platform_ioremap_resource
iio:light:ltr501: Drop unnecessary cast of parameter in regmap_bulk_read
iio:magn:mmc35240: Drop unnecessary casts of val parameter in regmap_bulk*
iio:imu:mpu6050: Tidy up parameters to regmap_bulk functions.
iio:chemical:bme680: Tidy up parameters to regmap_bulk_read
iio:chemical:atlas-sensor: Drop unnecessary explicit casts in regmap_bulk_read calls
iio:accel:mxc4005: Drop unnecessary explicit casts in regmap_bulk_read calls
iio: imu: st_lsm6dsx: drop huge include in sensor-hub driver
iio: buffer: drop devm_iio_kfifo_free() API call
iio: buffer: drop devm_iio_hw_consumer_free() API call
...
