The variable ret is being assigned with a value that is never read
and it is being updated later with a new value. The initialization is
redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
This converts the NetXbig LED driver to use GPIO descriptors
instead of using the legacy interfaces in <linux/of_gpio.h>
and <linux/gpio.h> to iteratively parse the device tree for
global GPIO numbers.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Tested-by: Simon Guinot <simon.guinot@sequanux.org>
We see that if the HW doesn't actually sleep, the HW may eat the poison
we set in its write-only HWSP during sanitize:
intel_gt_resume.part.8: 0000:00:02.0
__gt_unpark: 0000:00:02.0
gt_sanitize: 0000:00:02.0 force:yes
process_csb: 0000:00:02.0 vcs0: cs-irq head=5, tail=90
process_csb: 0000:00:02.0 vcs0: csb[0]: status=0x5a5a5a5a:0x5a5a5a5a
assert_pending_valid: Nothing pending for promotion!
The CS TAIL pointer should have been reset by reset_csb_pointers(), so
in this case it is likely that we have read back from the CPU cache and
so we must clflush our control over that page. In doing so, push the
sanitisation to the start of the GT sequence so that our poisoning is
assuredly before we start talking to the HW.
References: https://gitlab.freedesktop.org/drm/intel/-/issues/1794
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200427084000.10999-1-chris@chris-wilson.co.uk
We evaluate *active, which is a pointer into execlists->inflight[]
during dequeue to decide how long a preempt-timeout we need to apply.
However, as soon as we do the submit_ports, the HW may send its ACK
interrupt causing us to promote execlists->pending[] tp
execlists->inflight[], overwriting the value of *active. We know *active
is only stable until we submit (as we only submit when there is no
pending promotion).
[ 16.102328] BUG: KCSAN: data-race in execlists_dequeue+0x1449/0x1600 [i915]
[ 16.102356]
[ 16.102375] race at unknown origin, with read to 0xffff8881e9500488 of 8 bytes by task 429 on cpu 1:
[ 16.102780] execlists_dequeue+0x1449/0x1600 [i915]
[ 16.103160] __execlists_submission_tasklet+0x48/0x60 [i915]
[ 16.103540] execlists_submit_request+0x38e/0x3c0 [i915]
[ 16.103940] submit_notify+0x8f/0xc0 [i915]
[ 16.104308] __i915_sw_fence_complete+0x61/0x420 [i915]
[ 16.104683] i915_sw_fence_complete+0x58/0x80 [i915]
[ 16.105054] i915_sw_fence_commit+0x16/0x20 [i915]
[ 16.105457] __i915_request_queue+0x60/0x70 [i915]
[ 16.105843] i915_gem_do_execbuffer+0x2d6b/0x4230 [i915]
[ 16.106227] i915_gem_execbuffer2_ioctl+0x2b0/0x580 [i915]
[ 16.106257] drm_ioctl_kernel+0xe9/0x130
[ 16.106279] drm_ioctl+0x27d/0x45e
[ 16.106311] ksys_ioctl+0x89/0xb0
[ 16.106336] __x64_sys_ioctl+0x42/0x60
[ 16.106370] do_syscall_64+0x6e/0x2c0
[ 16.106397] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200426094231.21995-1-chris@chris-wilson.co.uk
Add DT nodes for all ehrpwm instances present on AM654 EVM.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
We need the staging fixes in here too, and this resolves a merge issue
with the vt6656 driver.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The DSS related clock muxes are set via assigned-clocks in a way which
provides us:
VP0 - DisplayPort SST
VP1 - DPI0
VP2 - DSI
VP3 - DPI1
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Add DSS node to k3-am65-main.dtsi with labels for board specific
support and syscon node for oldi-io-ctrl.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
New compatible values were introduced for the 48-bit CMT devices on
SH-Mobile AG5 and R-Mobile A1, and the old "cmt-48"-based values were
deprecated. However, the actual DTS files were never updated.
See also commits:
- 81b604c399 ("dt-bindings: timer: renesas, cmt: Update CMT1 on
sh73a0 and r8a7740"),
- 8c1afba285 ("clocksource/drivers/sh_cmt: r8a7740 and sh73a0
SoC-specific match"),
- 19d608458f ("clocksource/drivers/sh_cmt: Document "cmt-48" as
deprecated").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200420151553.22975-1-geert+renesas@glider.be
This adds dual fan control for the following models:
P50, P51, P52, P70, P71, P72, P1 gen1, P2 gen2, X1E gen1 and X1E gen2.
Both fans are controlled together as if they were a single fan.
Tested on an X1 Extreme Gen1, an X1 Extreme Gen2, and a P50.
The patch is defensive, it adds only specific supported machines, and falls
back to the old behavior if both fans cannot be controlled.
Background:
I tested the BIOS default behavior on my X1E gen2 and both fans are always
changed together. So rather than adding controls for each fan, this controls
both fans together as the BIOS would do.
This was inspired by a discussion on dual fan support for the thinkfan tool
(see link below). All BIOS IDs are taken from there. The X1E gen2 ID is
verified on my machine.
Thanks to GitHub users voidworker and civic9 for the earlier patches and
BIOS IDs, and to users peter-stoll and sassman for testing the patch on
their machines.
BugLink: https://github.com/vmatare/thinkfan/issues/58
Signed-off-by: Lars Hofhansl <larsh@apache.org>
[andy: massaged commit message to capitalize ID and convert to BugLink]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Link: https://lore.kernel.org/r/20200420181401.GA32172@embeddedor
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Add a driver for the SGMICRO SGM3140 Buck/Boost Charge Pump LED driver.
This device is controlled by two GPIO pins, one for enabling and the
second one for switching between torch and flash mode.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Add YAML devicetree binding for SGMICRO SGM3140 charge pump used for
camera flash LEDs.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Dan Murphy <dmurphy@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
This adds support for controlling the LEDs attached to the Embedded
Controller on a Dell Wyse 3020 "Ariel" board.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
led_pwm_set() now returns an error when setting the PWM fails.
Signed-off-by: Denis Osterland-Heim <Denis.Osterland@diehl.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
The timer-versatile driver provides a sched_clock for certain Arm Ltd.
reference platforms. Specifically, it is used on Versatile and 32-bit
VExpress. It is not needed for those platforms with an arch timer (all
the 64-bit ones) yet CONFIG_MFD_VEXPRESS_SYSREG does still need to be
enabled. In that case, the timer-versatile can only be disabled when
COMPILE_TEST is enabled which is not desirable. Let's use the sub-arch
kconfig symbols instead.
Realview platforms don't have the sysregs that this driver uses so
correct the help text.
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200417212045.16917-1-robh@kernel.org
Transitioned power state logged at the end of setting ACPI power.
However, D3cold won't be in the message because state can only be
D3hot at most.
Use target_state to corretly report when power state is D3cold.
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix the following sparse warnings:
drivers/acpi/cppc_acpi.c:353:20: warning: symbol 'cppc_mbox_cl' was not declared. Should it be static?
drivers/acpi/cppc_acpi.c:600:5: warning: symbol 'pcc_data_alloc' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It is possible for ACPI _CST to return only one ACPI C-state, for
example, when deep cstate disabled in the BIOS.
And it is better for the acpi_idle driver to probe succesfully in
this case as well for consistency.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently the kernel threads are not frozen in software_resume(), so
between dpm_suspend_start(PMSG_QUIESCE) and resume_target_kernel(),
system_freezable_power_efficient_wq can still try to submit SCSI
commands and this can cause a panic since the low level SCSI driver
(e.g. hv_storvsc) has quiesced the SCSI adapter and can not accept
any SCSI commands: https://lkml.org/lkml/2020/4/10/47
At first I posted a fix (https://lkml.org/lkml/2020/4/21/1318) trying
to resolve the issue from hv_storvsc, but with the help of
Bart Van Assche, I realized it's better to fix software_resume(),
since this looks like a generic issue, not only pertaining to SCSI.
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Make a note of the first time we discover the turbo mode has been
disabled by the BIOS, as otherwise we complain every time we try to
update the mode.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add the initrdmem option:
initrdmem=ss[KMG],nn[KMG]
which is used to specify the physical address of the initrd, almost
always an address in FLASH. Also add code for x86 to use the existing
phys_init_start and phys_init_size variables in the kernel.
This is useful in cases where a kernel and an initrd is placed in FLASH,
but there is no firmware file system structure in the FLASH.
One such situation occurs when unused FLASH space on UEFI systems has
been reclaimed by, e.g., taking it from the Management Engine. For
example, on many systems, the ME is given half the FLASH part; not only
is 2.75M of an 8M part unused; but 10.75M of a 16M part is unused. This
space can be used to contain an initrd, but need to tell Linux where it
is.
This space is "raw": due to, e.g., UEFI limitations: it can not be added
to UEFI firmware volumes without rebuilding UEFI from source or writing
a UEFI device driver. It can be referenced only as a physical address
and size.
At the same time, if a kernel can be "netbooted" or loaded from GRUB or
syslinux, the option of not using the physical address specification
should be available.
Then, it is easy to boot the kernel and provide an initrd; or boot the
the kernel and let it use the initrd in FLASH. In practice, this has
proven to be very helpful when integrating Linux into FLASH on x86.
Hence, the most flexible and convenient path is to enable the initrdmem
command line option in a way that it is the last choice tried.
For example, on the DigitalLoggers Atomic Pi, an image into FLASH can be
burnt in with a built-in command line which includes:
initrdmem=0xff968000,0x200000
which specifies a location and size.
[ bp: Massage commit message, make it passive. ]
[akpm@linux-foundation.org: coding style fixes]
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Link: http://lkml.kernel.org/r/CAP6exYLK11rhreX=6QPyDQmW7wPHsKNEFtXE47pjx41xS6O7-A@mail.gmail.com
Link: https://lkml.kernel.org/r/20200426011021.1cskg0AGd%akpm@linux-foundation.org
This driver is an OF driver, it depends on OF, and uses
TIMER_OF_DECLARE, so it should select CONFIG_TIMER_OF.
Without CONFIG_TIMER_OF enabled this can lead to warnings such as:
powerpc-linux-ld: warning: orphan section `__timer_of_table' from
`drivers/clocksource/timer-microchip-pit64b.o' being placed in
section `__timer_of_table'.
Because TIMER_OF_TABLES in vmlinux.lds.h doesn't emit anything into
the linker script when CONFIG_TIMER_OF is not enabled.
Fixes: 625022a5f1 ("clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support")
Cc: stable@vger.kernel.org # v5.6+
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200426124356.3929682-1-mpe@ellerman.id.au
configfs_rmdir() invokes configfs_get_config_item(), which returns a
reference of the specified config_item object to "parent_item" with
increased refcnt.
When configfs_rmdir() returns, local variable "parent_item" becomes
invalid, so the refcount should be decreased to keep refcount balanced.
The reference counting issue happens in one exception handling path of
configfs_rmdir(). When down_write_killable() fails, the function forgets
to decrease the refcnt increased by configfs_get_config_item(), causing
a refcnt leak.
Fix this issue by calling config_item_put() when down_write_killable()
fails.
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Instead of having all the sysctl handlers deal with user pointers, which
is rather hairy in terms of the BPF interaction, copy the input to and
from userspace in common code. This also means that the strings are
always NUL-terminated by the common code, making the API a little bit
safer.
As most handler just pass through the data to one of the common handlers
a lot of the changes are mechnical.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Move the sysctl tables to the end of the file to avoid lots of pointless
forward declarations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Extern declarations in .c files are a bad style and can lead to
mismatches. Use existing definitions in headers where they exist,
and otherwise move the external declarations to suitable header
files.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
