This is an immutable branch shared with the OPP tree. It contains also
the patches to convert the interconnect framework from tristate to bool
after Greg agreed with that. This will make the integration between
the OPP layer and interconnect much easier.
* icc-get-by-index:
interconnect: Add of_icc_get_by_index() helper function
interconnect: Disallow interconnect core to be built as a module
interconnect: Remove unused module exit code from core
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Building individual drivers as modules is fine but allowing a core
framework to be built as a module makes it really complex and should be
avoided.
Whatever uses the interconnect core APIs must also be built as a module
if interconnect core is built as module, else we will see compilation
failures.
If another core framework (like cpufreq, clk, etc), that can't be built
as module, needs to use interconnect APIs then we will start seeing
compilation failures with allmodconfig configurations as the symbols
(like of_icc_get()) used in other frameworks will not be available in
the built-in image.
Disallow the interconnect core to be built as a module to avoid all
these issues.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/b789cce388dd1f2906492f307dea6780c398bc6a.1567065991.git.viresh.kumar@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
The attached patch wraps several of the macros in IP27's spaces.h
header file with the _AC() macro. This matches most of the other
spaces.h files in the MIPS tree.
Signed-off-by: Joshua Kinard <kumba@gentoo.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
With the change of platform file inclusion object were included via
platform-y and core-y. Remove the core-y part to fix it.
Fixes: 26bff9eb49 ("MIPS: Only include the platformfile needed")
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Changing inclusion of Platform files, broke VR41xx platforms. Add Makefile
to vr41xx directory and traverse subdirs from it.
Fixes: 26bff9eb49 ("MIPS: Only include the platformfile needed")
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The script addresses array increases with each new version. The driver
initializes the array to -EINVAL initially, but only up to the size
of the v1 array. Initialize the additional addresses for the newer
versions as well. Without this uninitialized values of the newer arrays
are treated as valid.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Robin Gong <yibin.gong@nxp.com>
Link: https://lore.kernel.org/r/20200513060405.18685-1-s.hauer@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Currently zip sqe is stored in hisi_zip_qp_ctx, which will bring corruption
with multiple parallel users of the crypto tfm.
This patch removes the zip_sqe in hisi_zip_qp_ctx and uses a temporary sqe
instead.
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The hardware device can be configured to report directly through MSI, but
this method will not go through RAS, configure all hardware errors that
should be processed by driver to NFE.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Put all the code for the memory allocation into the QM initialization
process. Before, The qp memory was allocated when the qp was created,
and released when the qp was released, It is now changed to allocate
all the qp memory once.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add callback reset_prepare and reset_done in QM, The callback
reset_prepare will uninit device error configuration and stop
the QM, the callback reset_done will init the device error
configuration and restart the QM.
Uninit the error configuration will disable device block master OOO
when Multi-bit ECC error occurs to avoid the request of FLR will not
return.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add specific states for qm and qp, every state change under critical region
to prevent from race condition. Meanwhile, qp state change will also depend
on qm state.
Due to the introduction of these states, it is necessary to pay attention
to the calls of public logic, such as concurrent scenarios resetting and
releasing queue will call hisi_qm_stop, which needs to add additional
status to distinguish and process.
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
sec_dfx_regs is never changed and can therefore be made const.
This allows the compiler to put it in the text section instead of the
data section.
Before:
text data bss dec hex filename
17982 7312 480 25774 64ae drivers/crypto/hisilicon/sec2/sec_main.o
After:
text data bss dec hex filename
18366 6928 480 25774 64ae drivers/crypto/hisilicon/sec2/sec_main.o
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
hzip_dfx_regs is never changed and can be made const.
This allows the compiler to put it in the text section instead of the
data section.
Before:
text data bss dec hex filename
15236 6160 480 21876 5574 drivers/crypto/hisilicon/zip/zip_main.o
After:
text data bss dec hex filename
15620 5776 480 21876 5574 drivers/crypto/hisilicon/zip/zip_main.o
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
hpre_cluster_dfx_regs and hpre_com_dfx_regs are never changed and can
therefore be made const.
This allows the compiler to put it in the text section instead of the
data section.
Before:
text data bss dec hex filename
16455 6288 480 23223 5ab7 drivers/crypto/hisilicon/hpre/hpre_main.o
After:
text data bss dec hex filename
16839 5904 480 23223 5ab7 drivers/crypto/hisilicon/hpre/hpre_main.o
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
pid_cd_regs and debug_regs are never changed and can therefore be made
const.
This allows the compiler to put it in the text section instead of the
data section.
Before:
text data bss dec hex filename
2871 2320 64 5255 1487 drivers/crypto/ccree/cc_debugfs.o
After:
text data bss dec hex filename
3255 1936 64 5255 1487 drivers/crypto/ccree/cc_debugfs.o
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When building for ARMv7-M, clang-9 or higher tries to unroll some loops,
which ends up confusing the register allocator to the point of generating
rather bad code and using more than the warning limit for stack frames:
warning: stack frame size of 1200 bytes in function 'blake2b_compress' [-Wframe-larger-than=]
Forcing it to not unroll the final loop avoids this problem.
Fixes: 91d689337f ("crypto: blake2b - add blake2b generic implementation")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Jesper Dangaard Brouer says:
====================
V4:
- Fixup checkpatch.pl issues
- Collected more ACKs
V3:
- Fix issue on virtio_net patch spotted by Jason Wang
- Adjust name for variable in mlx5 patch
- Collected more ACKs
V2:
- Fix bug in mlx5 for XDP_PASS case
- Collected nitpicks and ACKs from mailing list
V1:
- Fix bug in dpaa2
XDP have evolved to support several frame sizes, but xdp_buff was not
updated with this information. This have caused the side-effect that
XDP frame data hard end is unknown. This have limited the BPF-helper
bpf_xdp_adjust_tail to only shrink the packet. This patchset address
this and add packet tail extend/grow.
The purpose of the patchset is ALSO to reserve a memory area that can be
used for storing extra information, specifically for extending XDP with
multi-buffer support. One proposal is to use same layout as
skb_shared_info, which is why this area is currently 320 bytes.
When converting xdp_frame to SKB (veth and cpumap), the full tailroom
area can now be used and SKB truesize is now correct. For most
drivers this result in a much larger tailroom in SKB "head" data
area. The network stack can now take advantage of this when doing SKB
coalescing. Thus, a good driver test is to use xdp_redirect_cpu from
samples/bpf/ and do some TCP stream testing.
Use-cases for tail grow/extend:
(1) IPsec / XFRM needs a tail extend[1][2].
(2) DNS-cache responses in XDP.
(3) HAProxy ALOHA would need it to convert to XDP.
(4) Add tail info e.g. timestamp and collect via tcpdump
[1] http://vger.kernel.org/netconf2019_files/xfrm_xdp.pdf
[2] http://vger.kernel.org/netconf2019.html
Examples on howto access the tail area of an XDP packet is shown in the
XDP-tutorial example[3].
[3] https://github.com/xdp-project/xdp-tutorial/blob/master/experiment01-tailgrow/
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Extend BPF selftest xdp_adjust_tail with grow tail tests, which is added
as subtest's. The first grow test stays in same form as original shrink
test. The second grow test use the newer bpf_prog_test_run_xattr() calls,
and does extra checking of data contents.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/158945350567.97035.9632611946765811876.stgit@firesoul
Update the memory requirements, when adding xdp.frame_sz in BPF test_run
function bpf_prog_test_run_xdp() which e.g. is used by XDP selftests.
Specifically add the expected reserved tailroom, but also allocated a
larger memory area to reflect that XDP frames usually comes in this
format. Limit the provided packet data size to 4096 minus headroom +
tailroom, as this also reflect a common 3520 bytes MTU limit with XDP.
Note that bpf_test_init already use a memory allocation method that clears
memory. Thus, this already guards against leaking uninit kernel memory.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/158945349549.97035.15316291762482444006.stgit@firesoul
Finally, after all drivers have a frame size, allow BPF-helper
bpf_xdp_adjust_tail() to grow or extend packet size at frame tail.
Remember that helper/macro xdp_data_hard_end have reserved some
tailroom. Thus, this helper makes sure that the BPF-prog don't have
access to this tailroom area.
V2: Remove one chicken check and use WARN_ONCE for other
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/158945348530.97035.12577148209134239291.stgit@firesoul
The mlx5 driver have multiple memory models, which are also changed
according to whether a XDP bpf_prog is attached.
The 'rx_striding_rq' setting is adjusted via ethtool priv-flags e.g.:
# ethtool --set-priv-flags mlx5p2 rx_striding_rq off
On the general case with 4K page_size and regular MTU packet, then
the frame_sz is 2048 and 4096 when XDP is enabled, in both modes.
The info on the given frame size is stored differently depending on the
RQ-mode and encoded in a union in struct mlx5e_rq union wqe/mpwqe.
In rx striding mode rq->mpwqe.log_stride_sz is either 11 or 12, which
corresponds to 2048 or 4096 (MLX5_WQ_TYPE_LINKED_LIST_STRIDING_RQ).
In non-striding mode (MLX5_WQ_TYPE_CYCLIC) the frag_stride is stored
in rq->wqe.info.arr[0].frag_stride, for the first fragment, which is
what the XDP case cares about.
To reduce effect on fast-path, this patch determine the frame_sz at
setup time, to avoid determining the memory model runtime. Variable
is named frame0_sz to make it clear that this is only the frame
size of the first fragment.
This mlx5 driver does a DMA-sync on XDP_TX action, but grow is safe
as it have done a DMA-map on the entire PAGE_SIZE. The driver also
already does a XDP length check against sq->hw_mtu on the possible
XDP xmit paths mlx5e_xmit_xdp_frame() + mlx5e_xmit_xdp_frame_mpwqe().
V3+4: Change variable name first_frame_sz to frame0_sz
V2: Fix that frag_size need to be recalc before creating SKB.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Tariq Toukan <tariqt@mellanox.com>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Link: https://lore.kernel.org/bpf/158945348021.97035.12295039384250022883.stgit@firesoul
This driver uses different memory models depending on PAGE_SIZE at
compile time. For PAGE_SIZE 4K it uses page splitting, meaning for
normal MTU frame size is 2048 bytes (and headroom 192 bytes). For
larger MTUs the driver still use page splitting, by allocating
order-1 pages (8192 bytes) for RX frames. For PAGE_SIZE larger than
4K, driver instead advance its rx_buffer->page_offset with the frame
size "truesize".
For XDP frame size calculations, this mean that in PAGE_SIZE larger
than 4K mode the frame_sz change on a per packet basis. For the page
split 4K PAGE_SIZE mode, xdp.frame_sz is more constant and can be
updated once outside the main NAPI loop.
The default setting in the driver uses build_skb(), which provides
the necessary headroom and tailroom for XDP-redirect in RX-frame
(in both modes).
There is one complication, which is legacy-rx mode (configurable via
ethtool priv-flags). There are zero headroom in this mode, which is a
requirement for XDP-redirect to work. The conversion to xdp_frame
(convert_to_xdp_frame) will detect this insufficient space, and
xdp_do_redirect() call will fail. This is deemed acceptable, as it
allows other XDP actions to still work in legacy-mode. In
legacy-mode + larger PAGE_SIZE due to lacking tailroom, we also
accept that xdp_adjust_tail shrink doesn't work.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: intel-wired-lan@lists.osuosl.org
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Link: https://lore.kernel.org/bpf/158945347002.97035.328088795813704587.stgit@firesoul
This driver uses different memory models depending on PAGE_SIZE at
compile time. For PAGE_SIZE 4K it uses page splitting, meaning for
normal MTU frame size is 2048 bytes (and headroom 192 bytes). For
larger MTUs the driver still use page splitting, by allocating
order-1 pages (8192 bytes) for RX frames. For PAGE_SIZE larger than
4K, driver instead advance its rx_buffer->page_offset with the frame
size "truesize".
For XDP frame size calculations, this mean that in PAGE_SIZE larger
than 4K mode the frame_sz change on a per packet basis. For the page
split 4K PAGE_SIZE mode, xdp.frame_sz is more constant and can be
updated once outside the main NAPI loop.
The default setting in the driver uses build_skb(), which provides
the necessary headroom and tailroom for XDP-redirect in RX-frame
(in both modes).
There is one complication, which is legacy-rx mode (configurable via
ethtool priv-flags). There are zero headroom in this mode, which is a
requirement for XDP-redirect to work. The conversion to xdp_frame
(convert_to_xdp_frame) will detect this insufficient space, and
xdp_do_redirect() call will fail. This is deemed acceptable, as it
allows other XDP actions to still work in legacy-mode. In
legacy-mode + larger PAGE_SIZE due to lacking tailroom, we also
accept that xdp_adjust_tail shrink doesn't work.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: intel-wired-lan@lists.osuosl.org
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Link: https://lore.kernel.org/bpf/158945346494.97035.12809400414566061815.stgit@firesoul
This driver uses different memory models depending on PAGE_SIZE at
compile time. For PAGE_SIZE 4K it uses page splitting, meaning for
normal MTU frame size is 2048 bytes (and headroom 192 bytes). For
larger MTUs the driver still use page splitting, by allocating
order-1 pages (8192 bytes) for RX frames. For PAGE_SIZE larger than
4K, driver instead advance its rx_buffer->page_offset with the frame
size "truesize".
For XDP frame size calculations, this mean that in PAGE_SIZE larger
than 4K mode the frame_sz change on a per packet basis. For the page
split 4K PAGE_SIZE mode, xdp.frame_sz is more constant and can be
updated once outside the main NAPI loop.
The default setting in the driver uses build_skb(), which provides
the necessary headroom and tailroom for XDP-redirect in RX-frame
(in both modes).
There is one complication, which is legacy-rx mode (configurable via
ethtool priv-flags). There are zero headroom in this mode, which is a
requirement for XDP-redirect to work. The conversion to xdp_frame
(convert_to_xdp_frame) will detect this insufficient space, and
xdp_do_redirect() call will fail. This is deemed acceptable, as it
allows other XDP actions to still work in legacy-mode. In
legacy-mode + larger PAGE_SIZE due to lacking tailroom, we also
accept that xdp_adjust_tail shrink doesn't work.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: intel-wired-lan@lists.osuosl.org
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Link: https://lore.kernel.org/bpf/158945345455.97035.14334355929030628741.stgit@firesoul
The ixgbe driver have another memory model when compiled on archs with
PAGE_SIZE above 4096 bytes. In this mode it doesn't split the page in
two halves, but instead increment rx_buffer->page_offset by truesize of
packet (which include headroom and tailroom for skb_shared_info).
This is done correctly in ixgbe_build_skb(), but in ixgbe_rx_buffer_flip
which is currently only called on XDP_TX and XDP_REDIRECT, it forgets
to add the tailroom for skb_shared_info. This breaks XDP_REDIRECT, for
veth and cpumap. Fix by adding size of skb_shared_info tailroom.
Maintainers notice: This fix have been queued to Jeff.
Fixes: 6453073987 ("ixgbe: add initial support for xdp redirect")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Link: https://lore.kernel.org/bpf/158945344946.97035.17031588499266605743.stgit@firesoul
