check_kcov_mode() is called by write_comp_data() and
__sanitizer_cov_trace_pc(), which are already on the uaccess safe list.
It's notrace and doesn't call out to anything else, so add it to the
list too.
This fixes the following warnings:
kernel/kcov.o: warning: objtool: __sanitizer_cov_trace_pc()+0x15: call to check_kcov_mode() with UACCESS enabled
kernel/kcov.o: warning: objtool: write_comp_data()+0x1b: call to check_kcov_mode() with UACCESS enabled
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
In io_sq_thread(), currently if we get an -EBUSY error and go to sleep,
we will won't clear it again, which will result in io_sq_thread() will
never have a chance to submit sqes again. Below test program test.c
can reveal this bug:
int main(int argc, char *argv[])
{
struct io_uring ring;
int i, fd, ret;
struct io_uring_sqe *sqe;
struct io_uring_cqe *cqe;
struct iovec *iovecs;
void *buf;
struct io_uring_params p;
if (argc < 2) {
printf("%s: file\n", argv[0]);
return 1;
}
memset(&p, 0, sizeof(p));
p.flags = IORING_SETUP_SQPOLL;
ret = io_uring_queue_init_params(4, &ring, &p);
if (ret < 0) {
fprintf(stderr, "queue_init: %s\n", strerror(-ret));
return 1;
}
fd = open(argv[1], O_RDONLY | O_DIRECT);
if (fd < 0) {
perror("open");
return 1;
}
iovecs = calloc(10, sizeof(struct iovec));
for (i = 0; i < 10; i++) {
if (posix_memalign(&buf, 4096, 4096))
return 1;
iovecs[i].iov_base = buf;
iovecs[i].iov_len = 4096;
}
ret = io_uring_register_files(&ring, &fd, 1);
if (ret < 0) {
fprintf(stderr, "%s: register %d\n", __FUNCTION__, ret);
return ret;
}
for (i = 0; i < 10; i++) {
sqe = io_uring_get_sqe(&ring);
if (!sqe)
break;
io_uring_prep_readv(sqe, 0, &iovecs[i], 1, 0);
sqe->flags |= IOSQE_FIXED_FILE;
ret = io_uring_submit(&ring);
sleep(1);
printf("submit %d\n", i);
}
for (i = 0; i < 10; i++) {
io_uring_wait_cqe(&ring, &cqe);
printf("receive: %d\n", i);
if (cqe->res != 4096) {
fprintf(stderr, "ret=%d, wanted 4096\n", cqe->res);
ret = 1;
}
io_uring_cqe_seen(&ring, cqe);
}
close(fd);
io_uring_queue_exit(&ring);
return 0;
}
sudo ./test testfile
above command will hang on the tenth request, to fix this bug, when io
sq_thread is waken up, we reset the variable 'ret' to be zero.
Suggested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The RTC found on the MAX77620 PMIC can be used as a wakeup source on
Jetson TX2, which is useful to wake the system from suspend at a given
time.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Enable the VI I2C so that the peripherals connected to it (such as the
camera connector, an INA3221 power monitor and the USB 3.1 4-port hub)
can be accessed.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tegra210 contains VI controller for video input capture from MIPI
CSI camera sensors and also supports built-in test pattern generator.
CSI ports can be one-to-one mapped to VI channels for capturing from
an external sensor or from built-in test pattern generator.
This patch adds support for VI and CSI and enables them in Tegra210
device tree.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tegra210 device tree is missing reset-cells property for the memory
controller node. This patch adds it.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tegra210 device tree lists CSI clock and reset under SOR powergate
node.
But Tegra210 has CSICIL in SOR partition and CSI in VENC partition.
So, this patch includes fix for SOR powergate node.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The PMIC RTC is currently unable to wakeup Tegra194 on the Jetson Xavier
platform because the interrupt from the PMIC is not usin the PMC as the
interrupt parent but the GIC directly. Update the PMIC interrupt to use
the PMC as the interrupt parent so that the PMIC RTC alarms can wakeup
the device.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The 'phy-mode' property is currently defined as 'rgmii' for Jetson
Xavier. This indicates that the RGMII RX and TX delays are set by the
MAC and the internal delays set by the PHY are not used.
If the Marvell PHY driver is enabled, such that it is used and not the
generic PHY, ethernet failures are seen (DHCP is failing to obtain an
IP address) and this is caused because the Marvell PHY driver is
disabling the internal RX and TX delays. For Jetson Xavier the internal
PHY RX and TX delay should be used and so fix this by setting the
'phy-mode' to 'rgmii-id' and not 'rgmii'.
Fixes: f89b58ce71 ("arm64: tegra: Add ethernet controller on Tegra194")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The external memory controller can be used as a cooling device for the
LPDDR chips. Hook it up to the "mem" thermal zone of the SOCTHERM block
so that temperature polling can be enabled on the EMC when a given
temperature is exceeded.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Although in the most platforms, the bus power of i2c
are alway on, some platforms disable the i2c bus power
in order to meet low power request.
We get and enable bulk regulator in i2c adapter device.
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
In some platforms, they disable the power-supply of i2c due
to power consumption reduction. This patch add bus-supply property.
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
[wsa: rebased to i2c/for-next]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Atomic transfers are not only about sending messages like the original
wording suggested. Speak of 'accessing' now like in i2c.h.
Reported-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
I don't plan to support every EEPROM type, but the 24c512 ones need a
tiny code update, so let's have that upstream.
Reported-by: Patrick Williams <patrick@stwcx.xyz>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
This patch adds a algorithm to calculate some ac-timing parameters
which can fully meet I2C Spec.
Signed-off-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Based on Yocto Aero's repository, the file name for the isp2401
is the same for the B0 release.
So, unify it at the driver.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When checking sh_css.c against the Yocto Aero's version, it can
be noticed that some isp2401 dependencies may have been taken
wrongly.
Change the code to work like the Yocto Aero, as this driver
was tested in the past with an ISP2401 device.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Depending on the ISP-specific HAS_NO_INPUT_FORMATTER macro,
some IRQs will be ignored by the driver. Yet, those keep
happening, as reported by this debug print:
[ 61.620746] atomisp-isp2 0000:00:03.0: atomisp_css_irq_enable: css irq info 0x00000004: disable.
Causing this warning:
[ 61.620749] atomisp-isp2 0000:00:03.0: atomisp_css_irq_enable:Invalid irq info.
Well, if this is a normal situation, just ignore it without
warnings.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Calling acpi_bus_get_device() may end allocating resources that
aren't freed. So, add a notice about that, as, if those drivers
get out of staging, we may need some changes.
Fixes: 0d64e94205 ("media: atomisp: Add some ACPI detection info")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The memory management code for atomisp is complex: it has 2
extra pools (plus some ION-specific code).
The code for those extra pools are complex, and there are even
some parts of code over there that were forked from some
mm/ code, probably from Kernel 3.10.
Let's just use a single one, in order to make the driver
simpler.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Instead of trying to send multiple bytes at the same time,
just go one by one, like the upstream driver does.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There is an ov2680 driver mainstream. Use the read/write
routines from it, as the ones inside this driver are
generating some errors:
ov2680 i2c-OVTI2680:00: ov2680_i2c_write: i2c write reg=0x3086, value 0x00, error -121
Maybe the code that changes from/to BE are not right.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Change some code at ov2680 for it to better report what's
happening there at sensor's level.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The sensor should finish its init before atomisp driver, as
otherwise the atomisp driver won't be able to talk with it.
So, we need to turn atomisp_gmin_platform into a module
again, for it to not depend on atomisp driver to finish
probing, and add some delay at atomisp to let the sensor
driver to finish probing.
Yeah, this is hacky. The real solution here would be to use
the async framework, but for now, our goal is to make the
driver to work. So, let's postpone such change to be done
later.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The current code causes ISP2401 to power down and never return
back to live, causing the driver to crash.
Fix it by commenting out the bad code. It should be noticed that
the Yocto Aero code has something similar to it.
Maybe the issue is related to an ISP bug (or maybe PM is
controlled on a different way for this hardware).
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The value returned by BIOS is 1. Fix it at the driver,
as it won't read this from EFI.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Simplify the hmm_bo a little bit by removing this
macro. This will avoid printing twice errors when
allocations happen.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Those files seem to be firmware-dependent, probably being used
by some debug interface.
Well, their contents are not really used by atomisp, so let's
just send them to the trash can, as it shouldn't have any
usage upstream.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When changing the IFs to select isp2401 at runtime, one of
the conditions ended by being written wrong.
Code double-checked on both Yocto Aero's driver version and
against the previous code.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Use the version from intel_atomisp2_pm.c for power up/down,
removing some code duplication and using just one kAPI call
for modifying the ISPSSPM0 register.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Changing to pci_enable_device() didn't produce the expected
result. It could also eventually led to problems when driver
is removed, due to object lifetime issues. So, let's just
return to the previous behavior.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This patch required lots of research and work. The existing
atomisp driver at staging assumed that all Intel PMIC would
be using regulators, but upstream didn't follow it. Instead,
the intel_pmic.c driver added a hack, instead of using i2c_transfer,
it writes I2C values directly via regmapped registers.
Oh, well... At least, it provided a common API for doing that.
The PMIC settings used here came from the driver at the
yocto Aero distribution:
https://download.01.org/aero/deb/pool/main/l/linux-4.4.76-aero-1.3/
The logic itself was re-written, in order to use the I2C address
detected by the probing part.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
