pm_runtime_get_sync() increments the runtime PM usage counter even
the call returns an error code. Thus a pairing decrement is needed
on the error handling path to keep the counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Memory bandwidth is calculated reading the monitoring counter
at two intervals and calculating the delta. It is the software’s
responsibility to read the count often enough to avoid having
the count roll over _twice_ between reads.
The current code hardcodes the bandwidth monitoring counter's width
to 24 bits for AMD. This is due to default base counter width which
is 24. Currently, AMD does not implement the CPUID 0xF.[ECX=1]:EAX
to adjust the counter width. But, the AMD hardware supports much
wider bandwidth counter with the default width of 44 bits.
Kernel reads these monitoring counters every 1 second and adjusts the
counter value for overflow. With 24 bits and scale value of 64 for AMD,
it can only measure up to 1GB/s without overflowing. For the rates
above 1GB/s this will fail to measure the bandwidth.
Fix the issue setting the default width to 44 bits by adjusting the
offset.
AMD future products will implement CPUID 0xF.[ECX=1]:EAX.
[ bp: Let the line stick out and drop {}-brackets around a single
statement. ]
Fixes: 4d05bf71f1 ("x86/resctrl: Introduce AMD QOS feature")
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/159129975546.62538.5656031125604254041.stgit@naples-babu.amd.com
There are several issues with the bluetooth node - the wrong
compatible was used (because the bcm4329 compatible didn't exist
when the node was added), the max rate was incorrect (due to
limitations in the samsung TTY driver which have now been fixed),
the clocks were not assigned properly so some rates didn't work,
and the some pinctrl settings weren't explicitly set. Fix all
of the above issues.
While we're at it, update from the deprecated host-wakeup-gpios
property to the host-wake interrupt.
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Aries boards have a BMA023 accelerometer attached over i2c-gpio.
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Aries boards have a GP2A light/proximity sensor attached over i2c-gpio.
As the chip outputs a current and the board has no current ADC, a
current shunt resistor and a voltage ADC are used.
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Correct the fuelgauge definition because only the fuelgauge on
fascinate4g has interrupt support (and even then it was wrong).
Also, assign the GPIO pinctrl so the interrupt is properly configured
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The GPH3 pins on s5pv210 have interrupt support and had the
interrupt-cells property but was missing the interrupt-controller
property.
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add a node for the BCM4354 Bluetooth chip on the serial bus #0 on
the Exynos3250-based Artik5 boards.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
fix error "clock source 41 is not valid, cannot use"
[] New USB device found, idVendor=154e, idProduct=1002, bcdDevice= 1.00
[] New USB device strings: Mfr=1, Product=2, SerialNumber=0
[] Product: DCD-1500RE
[] Manufacturer: D & M Holdings Inc.
[]
[] clock source 41 is not valid, cannot use
[] usbcore: registered new interface driver snd-usb-audio
Signed-off-by: Yick W. Tse <y_w_tse@yahoo.com.hk>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1373857985.210365.1592048406997@mail.yahoo.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On Exynos5422/5800 the regulator supply for the A15 cores ("vdd_arm") is
coupled with the regulator supply for the SoC internal circuits
("vdd_int"), thus all operating points that modify one of those supplies
have to specify a triplet of the min/target/max values to properly work
with regulator coupling.
Fixes: eaffc4de16 ("ARM: dts: exynos: Add missing CPU frequencies for Exynos5422/5800")
Cc: <stable@vger.kernel.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
DMA_REMAP is an unnecessary requirement for AMD SEV, which requires
DMA_COHERENT_POOL, so avoid selecting it when it is otherwise unnecessary.
The only other requirement for DMA coherent pools is DMA_DIRECT_REMAP, so
ensure that properly selects the config option when needed.
Fixes: 82fef0ad81 ("x86/mm: unencrypted non-blocking DMA allocations use coherent pools")
Reported-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Signed-off-by: David Rientjes <rientjes@google.com>
Tested-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The crypto algorithms selected by the ESP and AH kconfig options are
out-of-date with the guidance of RFC 8221, which lists the legacy
algorithms MD5 and DES as "MUST NOT" be implemented, and some more
modern algorithms like AES-GCM and HMAC-SHA256 as "MUST" be implemented.
But the options select the legacy algorithms, not the modern ones.
Therefore, modify these options to select the MUST algorithms --
and *only* the MUST algorithms.
Also improve the help text.
Note that other algorithms may still be explicitly enabled in the
kconfig, and the choice of which to actually use is still controlled by
userspace. This change only modifies the list of algorithms for which
kernel support is guaranteed to be present.
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Suggested-by: Steffen Klassert <steffen.klassert@secunet.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Corentin Labbe <clabbe@baylibre.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Commit f23efcbcc5 ("crypto: ctr - no longer needs CRYPTO_SEQIV") made
CRYPTO_CTR stop selecting CRYPTO_SEQIV. This breaks IPsec for most
users since GCM and several other encryption algorithms require "seqiv"
-- and RFC 8221 lists AES-GCM as "MUST" be implemented.
Just make XFRM_ESP select CRYPTO_SEQIV.
Fixes: f23efcbcc5 ("crypto: ctr - no longer needs CRYPTO_SEQIV")
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Corentin Labbe <clabbe@baylibre.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Set smbus_en of IO expander to 1 in order to be able to read sensor.
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Commit
10e68b02c8 ("Makefile: support compressed debug info")
added support for compressed debug sections.
Support is detected by checking
- does the compiler support -gz=zlib
- does the assembler support --compressed-debug-sections=zlib
- does the linker support --compressed-debug-sections=zlib
However, the gcc driver's support for this option is somewhat
convoluted. The driver's builtin specs are set based on the version of
binutils that it was configured with. It reports an error if the
configure-time linker/assembler (i.e., not necessarily the actual
assembler that will be run) do not support the option, but only if the
assembler (or linker) is actually invoked when -gz=zlib is passed.
The cc-option check in scripts/Kconfig.include does not invoke the
assembler, so the gcc driver reports success even if it does not support
the option being passed to the assembler.
Because the as-option check passes the option directly to the assembler
via -Wa,--compressed-debug-sections=zlib, the gcc driver does not see
this option and will never report an error.
Combined with an installed version of binutils that is more recent than
the one the compiler was built with, it is possible for all three tests
to succeed, yet an actual compilation with -gz=zlib to fail.
Moreover, it is unnecessary to explicitly pass
--compressed-debug-sections=zlib to the assembler via -Wa, since the
driver will do that automatically when it supports -gz=zlib.
Convert the as-option to just -gz=zlib, simplifying it as well as
performing a better test of the gcc driver's capabilities.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The freescale.com e-mail domain is no longer active for quite some
time. Switch Li Jun's e-mail address to the NXP domain.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
The damn file is constant-sized - 64 bytes. IOW,
* i_size_read() is pointless
* so's dynamic allocation
* so's the 'size' argument of user_dlm_read_lvb()
* ... and so's open-coding simple_read_from_buffer(), while we are at it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
scripts/checkpatch.pl reports following warning for patch
("bcache: check and adjust logical block size for backing devices"),
WARNING: quoted string split across lines
#146: FILE: drivers/md/bcache/super.c:896:
+ pr_info("%s: sb/logical block size (%u) greater than page size "
+ "(%lu) falling back to device logical block size (%u)",
There are two things to fix up,
- The kernel message print should be in a single line.
- pr_info() won't automatically add new line since v5.8, a '\n' should
be added.
This patch just does the above cleanup in bcache_device_init().
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch changes the asynchronous registration kworker to a delayed
kworker. There is probability queue_work() queues the async registration
kworker to the same CPU (even though very little), then the process
which writing sysfs interface to reigster bcache device may won't return
immeidately. queue_delayed_work() in this patch will delay 10 jiffies
before insert the kworker to run queue, which makes sure the registering
process may always returns to user space in time.
Fixes: 9e23ccf8f0 ("bcache: asynchronous devices registration")
Signed-off-by: Coly Li <colyli@suse.de>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It's possible for a block driver to set logical block size to
a value greater than page size incorrectly; e.g. bcache takes
the value from the superblock, set by the user w/ make-bcache.
This causes a BUG/NULL pointer dereference in the path:
__blkdev_get()
-> set_init_blocksize() // set i_blkbits based on ...
-> bdev_logical_block_size()
-> queue_logical_block_size() // ... this value
-> bdev_disk_changed()
...
-> blkdev_readpage()
-> block_read_full_page()
-> create_page_buffers() // size = 1 << i_blkbits
-> create_empty_buffers() // give size/take pointer
-> alloc_page_buffers() // return NULL
.. BUG!
Because alloc_page_buffers() is called with size > PAGE_SIZE,
thus it initializes head = NULL, skips the loop, return head;
then create_empty_buffers() gets (and uses) the NULL pointer.
This has been around longer than commit ad6bf88a6c ("block:
fix an integer overflow in logical block size"); however, it
increased the range of values that can trigger the issue.
Previously only 8k/16k/32k (on x86/4k page size) would do it,
as greater values overflow unsigned short to zero, and queue_
logical_block_size() would then use the default of 512.
Now the range with unsigned int is much larger, and users w/
the 512k value, which happened to be zero'ed previously and
work fine, started to hit this issue -- as the zero is gone,
and queue_logical_block_size() does return 512k (>PAGE_SIZE.)
Fix this by checking the bcache device's logical block size,
and if it's greater than page size, fallback to the backing/
cached device's logical page size.
This doesn't affect cache devices as those are still checked
for block/page size in read_super(); only the backing/cached
devices are not.
Apparently it's a regression from commit 2903381fce ("bcache:
Take data offset from the bdev superblock."), moving the check
into BCACHE_SB_VERSION_CDEV only. Now that we have superblocks
of backing devices out there with this larger value, we cannot
refuse to load them (i.e., have a similar check in _BDEV.)
Ideally perhaps bcache should use all values from the backing
device (physical/logical/io_min block size)? But for now just
fix the problematic case.
Test-case:
# IMG=/root/disk.img
# dd if=/dev/zero of=$IMG bs=1 count=0 seek=1G
# DEV=$(losetup --find --show $IMG)
# make-bcache --bdev $DEV --block 8k
< see dmesg >
Before:
# uname -r
5.7.0-rc7
[ 55.944046] BUG: kernel NULL pointer dereference, address: 0000000000000000
...
[ 55.949742] CPU: 3 PID: 610 Comm: bcache-register Not tainted 5.7.0-rc7 #4
...
[ 55.952281] RIP: 0010:create_empty_buffers+0x1a/0x100
...
[ 55.966434] Call Trace:
[ 55.967021] create_page_buffers+0x48/0x50
[ 55.967834] block_read_full_page+0x49/0x380
[ 55.972181] do_read_cache_page+0x494/0x610
[ 55.974780] read_part_sector+0x2d/0xaa
[ 55.975558] read_lba+0x10e/0x1e0
[ 55.977904] efi_partition+0x120/0x5a6
[ 55.980227] blk_add_partitions+0x161/0x390
[ 55.982177] bdev_disk_changed+0x61/0xd0
[ 55.982961] __blkdev_get+0x350/0x490
[ 55.983715] __device_add_disk+0x318/0x480
[ 55.984539] bch_cached_dev_run+0xc5/0x270
[ 55.986010] register_bcache.cold+0x122/0x179
[ 55.987628] kernfs_fop_write+0xbc/0x1a0
[ 55.988416] vfs_write+0xb1/0x1a0
[ 55.989134] ksys_write+0x5a/0xd0
[ 55.989825] do_syscall_64+0x43/0x140
[ 55.990563] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 55.991519] RIP: 0033:0x7f7d60ba3154
...
After:
# uname -r
5.7.0.bcachelbspgsz
[ 31.672460] bcache: bcache_device_init() bcache0: sb/logical block size (8192) greater than page size (4096) falling back to device logical block size (512)
[ 31.675133] bcache: register_bdev() registered backing device loop0
# grep ^ /sys/block/bcache0/queue/*_block_size
/sys/block/bcache0/queue/logical_block_size:512
/sys/block/bcache0/queue/physical_block_size:8192
Reported-by: Ryan Finnie <ryan@finnie.org>
Reported-by: Sebastian Marsching <sebastian@marsching.com>
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
coccicheck reports:
drivers/md//bcache/btree.c:1538:1-7: preceding lock on line 1417
In btree_gc_coalesce func, if the coalescing process fails, we will goto
to out_nocoalesce tag directly without releasing new_nodes[i]->write_lock.
Then, it will cause a deadlock when trying to acquire new_nodes[i]->
write_lock for freeing new_nodes[i] before return.
btree_gc_coalesce func details as follows:
if alloc new_nodes[i] fails:
goto out_nocoalesce;
// obtain new_nodes[i]->write_lock
mutex_lock(&new_nodes[i]->write_lock)
// main coalescing process
for (i = nodes - 1; i > 0; --i)
[snipped]
if coalescing process fails:
// Here, directly goto out_nocoalesce
// tag will cause a deadlock
goto out_nocoalesce;
[snipped]
// release new_nodes[i]->write_lock
mutex_unlock(&new_nodes[i]->write_lock)
// coalesing succ, return
return;
out_nocoalesce:
btree_node_free(new_nodes[i]) // free new_nodes[i]
// obtain new_nodes[i]->write_lock
mutex_lock(&new_nodes[i]->write_lock);
// set flag for reuse
clear_bit(BTREE_NODE_dirty, &ew_nodes[i]->flags);
// release new_nodes[i]->write_lock
mutex_unlock(&new_nodes[i]->write_lock);
To fix the problem, we add a new tag 'out_unlock_nocoalesce' for
releasing new_nodes[i]->write_lock before out_nocoalesce tag. If
coalescing process fails, we will go to out_unlock_nocoalesce tag
for releasing new_nodes[i]->write_lock before free new_nodes[i] in
out_nocoalesce tag.
(Coly Li helps to clean up commit log format.)
Fixes: 2a285686c1 ("bcache: btree locking rework")
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The NSP SoC includes an SP804 timer so should be enabled here.
Fixes: a0efb0d28b ("ARM: dts: NSP: Add SP804 Support to DT")
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Pull SafeSetID update from Micah Morton:
"Add additional LSM hooks for SafeSetID
SafeSetID is capable of making allow/deny decisions for set*uid calls
on a system, and we want to add similar functionality for set*gid
calls.
The work to do that is not yet complete, so probably won't make it in
for v5.8, but we are looking to get this simple patch in for v5.8
since we have it ready.
We are planning on the rest of the work for extending the SafeSetID
LSM being merged during the v5.9 merge window"
* tag 'LSM-add-setgid-hook-5.8-author-fix' of git://github.com/micah-morton/linux:
security: Add LSM hooks to set*gid syscalls
The SafeSetID LSM uses the security_task_fix_setuid hook to filter
set*uid() syscalls according to its configured security policy. In
preparation for adding analagous support in the LSM for set*gid()
syscalls, we add the requisite hook here. Tested by putting print
statements in the security_task_fix_setgid hook and seeing them get hit
during kernel boot.
Signed-off-by: Thomas Cedeno <thomascedeno@google.com>
Signed-off-by: Micah Morton <mortonm@chromium.org>
Pull btrfs updates from David Sterba:
"This reverts the direct io port to iomap infrastructure of btrfs
merged in the first pull request. We found problems in invalidate page
that don't seem to be fixable as regressions or without changing iomap
code that would not affect other filesystems.
There are four reverts in total, but three of them are followup
cleanups needed to revert a43a67a2d7 cleanly. The result is the
buffer head based implementation of direct io.
Reverts are not great, but under current circumstances I don't see
better options"
* tag 'for-5.8-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Revert "btrfs: switch to iomap_dio_rw() for dio"
Revert "fs: remove dio_end_io()"
Revert "btrfs: remove BTRFS_INODE_READDIO_NEED_LOCK"
Revert "btrfs: split btrfs_direct_IO to read and write part"
Add lock protection from race conditions to the 104-quad-8 counter
driver for filter clock prescaler code changes. Mutex calls used for
protection.
Signed-off-by: Syed Nayyar Waris <syednwaris@gmail.com>
Fixes: de65d05563 ("counter: 104-quad-8: Support Filter Clock Prescaler")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add lock protection from race conditions to 104-quad-8 counter driver
for differential encoder status code changes. Mutex lock calls used for
protection.
Signed-off-by: Syed Nayyar Waris <syednwaris@gmail.com>
Fixes: 954ab5cc5f ("counter: 104-quad-8: Support Differential Encoder Cable Status")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
If a driver does not assign an of_node to a IIO device to IIO core will
automatically assign the of_node of the parent device. This automatic
assignment is done in the iio_device_register() function.
There is a fair amount of drivers that currently manually assign the
of_node of the IIO device. All but 4 of them can make use of the automatic
assignment though.
The exceptions are:
* mxs-lradc-adc: Which uses the of_node of the parent of the parent.
* stm32-dfsdm-adc, stm32-adc and stm32-dac: Which reference the of_node
assigned to the IIO device before iio_device_register() is called.
All other drivers are updated to use automatic assignment. This reduces
the amount of boilerplate code involved in setting up the IIO device.
The patch has mostly been auto-generated with the following semantic patch
// <smpl>
@exists@
expression indio_dev;
expression parent;
@@
indio_dev = \(devm_iio_device_alloc\|iio_device_alloc\)(&parent, ...)
...
-indio_dev->dev.of_node = parent.of_node;
@exists@
expression indio_dev;
expression parent;
@@
indio_dev = \(devm_iio_device_alloc\|iio_device_alloc\)(parent, ...)
...
-indio_dev->dev.of_node = parent->of_node;
// </smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When devm_regmap_init_i2c() returns an error code, a pairing
runtime PM usage counter decrement is needed to keep the
counter balanced. For error paths after ak8974_set_power(),
ak8974_detect() and ak8974_reset(), things are the same.
However, When iio_triggered_buffer_setup() returns an error
code, there will be two PM usgae counter decrements.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Fixes: 7c94a8b2ee ("iio: magn: add a driver for AK8974")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The function iio_device_register() was called in mma8452_probe().
But the function iio_device_unregister() was not called after
a call of the function mma8452_set_freefall_mode() failed.
Thus add the missed function call for one error case.
Fixes: 1a965d405f ("drivers:iio:accel:mma8452: added cleanup provision in case of failure.")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses a 40 byte array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here. We close both issues by
moving to a suitable structure in the iio_priv() data with alignment
explicitly requested. This data is allocated with kzalloc so no
data can leak appart from previous readings.
Fixes: 87aec56e27 ("iio: health: Add driver for the TI AFE4404 heart monitor")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses a 32 byte array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here. We close both issues by
moving to a suitable structure in the iio_priv() data with alignment
explicitly requested. This data is allocated with kzalloc so no
data can leak appart from previous readings.
Fixes: eec96d1e2d ("iio: health: Add driver for the TI AFE4403 heart monitor")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Andrew F. Davis <afd@ti.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
These were found by doing some shell magic:
------------
for file in $(git grep -w devm_iio_device_alloc | cut -d: -f1 | sort | uniq) ; do
if grep 'parent =' $file | grep -v trig | grep -vq devm_; then
echo "$file -> $(grep "parent =" $file)"
fi
done
-----------
The output is bearable [after the semantic patch is applied].
There is a mix of trigger assignments with some iio device parent
assignments that are removed via this patch.
JC: A few more added via inspection of all parent =
statements in drivers/iio. Some of these may just have crossed with this
series, others were less obvious to scripting due to some cross
file / module boundary calls.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This assignment is the more peculiar as it assigns the parent of the
platform-device's device (i.e. pdev->dev.parent) as the IIO device's
parent.
Since the devm_iio_device_alloc() [now] assigns the device argument as the
default parent (and since this is the more common case), for cases
where the parent needs to be different, the iio_device_set_parent helper
should be used.
That makes things a bit more obvious about the new behavior of
devm_iio_device_alloc() and makes it clearer that iio_device_set_parent()
should be used.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
These were obtained by doing a 'git diff | grep \/\*', in the previous diff
to find comments. These needed a bit more manual review, as the semantic
patch isn't great for catching these.
The result is:
/* Initialize Counter device and driver data */
/* Initialize IIO device */
/* Establish that the iio_dev is a child of the spi device */
/* Estabilish that the iio_dev is a child of the spi device */
/* Initiate the Industrial I/O device */
/* Establish that the iio_dev is a child of the device */
- /* establish that the iio_dev is a child of the i2c device */
- /* establish that the iio_dev is a child of the i2c device */
/* This is only used for removal purposes */
/* setup the industrialio driver allocated elements */
/* variant specific configuration */
/* Setup for userspace synchronous on demand sampling. */
st->readback_delay_us += 5; /* Add tWAIT */
- /* Establish that the iio_dev is a child of the i2c device */
/* Establish that the iio_dev is a child of the i2c device */
Out of which, 4 are really left-over comments about parent assignment.
3 of them are removed by the semantic patch, as the comment removed (by
spatch) would be for an empty line.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This patch applies the semantic patch:
@@
expression I, P, SP;
@@
I = devm_iio_device_alloc(P, SP);
...
- I->dev.parent = P;
It updates 302 files and does 307 deletions.
This semantic patch also removes some comments like
'/* Establish that the iio_dev is a child of the i2c device */'
But this is is only done in case where the block is left empty.
The patch does not seem to cover all cases. It looks like in some cases a
different variable is used in some cases to assign the parent, but it
points to the same reference.
In other cases, the block covered by ... may be just too big to be covered
by the semantic patch.
However, this looks pretty good as well, as it does cover a big bulk of the
drivers that should remove the parent assignment.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
By default, the device allocation will also assign a parent device to the
IIO device object. In cases where devm_iio_device_alloc() is used,
sometimes the parent device must be different than the device used to
manage the allocation.
In that case, this helper should be used to change the parent, hence the
requirement to call this between allocation & registration.
This pattern/requirement is not very common in the IIO space, and it may be
cleaned up later.
But until then, assigning the parent manually between allocation &
registration is slightly easier.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The change passes the parent device to the iio_device_alloc() call. This
also updates the devm_iio_device_alloc() call to consider the device object
as the parent device by default.
Having it passed like this, should ensure that any IIO device object
already has a device object as parent, allowing for neater control, like
passing the 'indio_dev' object for other stuff [like buffers/triggers/etc],
and potentially creating iiom_xxx(indio_dev) functions.
With this patch, only the 'drivers/platform/x86/toshiba_acpi.c' needs an
update to pass the parent object as a parameter.
In the next patch all devm_iio_device_alloc() calls will be handled.
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Since if there is no GPIO, nothing happens, replace devm_gpiod_get()
with devm_gpiod_get_optional().
Also add IS_ERR() to fix the missing-check warning.
Fixes: cee211f4e5 ("iio: amplifiers: ad8366: Add support for the ADA4961 DGA")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
