hid-multitouch currently runs GET_REPORT for Contact Max and again to
retrieve the Win8 blob. If both are within the same report, the
Resolution Multiplier code calls GET_FEATURE again and this time,
possibly due to timing, it causes the ILITEK-TP device interpret the
GET_FEATURE as an instruction to change the mode and effectively stop
the device from functioning as expected.
Notably: the device doesn't even have a Resolution Multiplier so it
shouldn't be affected by any of this at all.
Fix this by making sure we only execute GET_REPORT if there is
a Resolution Multiplier in the respective report. Where the
HID_QUIRK_NO_INIT_REPORTS field is set we just bail out immediately. This
shouldn't be triggered by any real device anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Wen He <wen.he_1@nxp.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Introduce "requires:" list to check required ftrace interface
for each test. This will simplify the interface checking code
and unify the error message. Another good point is, it can
skip the ftrace initializing.
Note that this requires list must be written as a shell
comment.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The Mediacom FlexBook edge13 uses the SIPODEV SP1064 touchpad, which does not
supply descriptors, so it has to be added to the override list.
Signed-off-by: Federico Ricchiuto <fed.ricchiuto@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The variable retval is being initialized with a value that is
never read and it is being updated later with a new value. The
initialization is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
As same as other test cases, return unsupported if kprobe_events
or argument access feature are not found.
There can be a new arch which does not port those features yet,
and an older kernel which doesn't support it.
Those can not enable the features.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Allow ":" in the description line. Currently if there is ":"
in the test description line, the description is cut at that
point, but that was unintended.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
usbhid tries to give the device 50 milliseconds to drain its queues when
opening the device, but does it naively by simply sleeping in open handler,
which slows down device probing (and thus may affect overall boot time).
However we do not need to sleep as we can instead mark a point of time in
the future when we should start processing the events.
Reported-by: Nicolas Boichat <drinkcat@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add the i.MX8MQ VPU module which comprises Hantro G1 and G2 video
decoder cores and a reset/control block.
Hook up the bus clock to the VPU power domain to enable handshakes, and
configure the core clocks to 600 MHz and the bus clock to 800 MHz by
default.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Currently target_copy() is used only for sending linger pings, so
this doesn't come up, but generally omitting used_replica can hang
the client as we wouldn't notice the acting set change (legacy_change
in calc_target()) or trigger a warning in handle_reply().
Fixes: 117d96a04f ("libceph: support for balanced and localized reads")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Currently target_copy() is used only for sending linger pings, so
this doesn't come up, but generally omitting recovery_deletes can
result in unneeded resends (force_resend in calc_target()).
Fixes: ae78dd8139 ("libceph: make RECOVERY_DELETES feature create a new interval")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
osd_req_flags is overly general and doesn't suit its only user
(read_from_replica option) well:
- applying osd_req_flags in account_request() affects all OSD
requests, including linger (i.e. watch and notify). However,
linger requests should always go to the primary even though
some of them are reads (e.g. notify has side effects but it
is a read because it doesn't result in mutation on the OSDs).
- calls to class methods that are reads are allowed to go to
the replica, but most such calls issued for "rbd map" and/or
exclusive lock transitions are requested to be resent to the
primary via EAGAIN, doubling the latency.
Get rid of global osd_req_flags and set read_from_replica flag
only on specific OSD requests instead.
Fixes: 8ad44d5e0d ("libceph: read_from_replica option")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
There are a few dummy stub functions that are not marked as static inline
yet. Currently this header file is not included in any other file outside
of drivers/interconnect/, but that might not be the case in the future.
If this file gets included and the framework is disabled, we will be see
warnings. Let's fix this in advance.
Link: https://lore.kernel.org/r/20200228145945.13579-1-georgi.djakov@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
This patch adds support for a new boolean 'inter_set' field in struct
icc_provider. Setting it to 'true' enables calling '->set' for
inter-provider node pairs. All existing users of the interconnect
framework allocate this structure with kzalloc, and are therefore
unaffected by this change.
This makes it easier for hierarchies like exynos-bus, where every bus
is probed separately and registers a separate interconnect provider, to
model constraints between buses.
Signed-off-by: Artur Świgoń <a.swigon@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200521122841.8867-4-s.nawrocki@samsung.com
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
This patch relaxes the condition in of_icc_get_from_provider() so that
it is no longer required to set '#interconnect-cells' to <1> in the DT,
and therefore it is not required to supply dummy node IDs in the
'interconnects' property when node IDs are dynamically generated rather
than hardcoded (statically allocated).
In case of the devfreq driver for exynos-bus, node IDs are dynamically
allocated and '#interconnect-cells' is always zero.
Signed-off-by: Artur Świgoń <a.swigon@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Link: https://lore.kernel.org/r/20200521122841.8867-3-s.nawrocki@samsung.com
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
UBSAN is supported since GCC 4.9, which unfortunately did not yet have
__has_attribute(). To work around, the __GCC4_has_attribute workaround
requires defining which compiler version supports the given attribute.
In the case of no_sanitize_undefined, it is the first version that
supports UBSAN, which is GCC 4.9.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Link: https://lkml.kernel.org/r/20200615231529.GA119644@google.com
The ghes driver reports errors with 'unknown label' even if the actual
DIMM label is known, e.g.:
EDAC MC0: 1 CE Single-bit ECC on unknown label (node:0 card:0
module:0 rank:1 bank:0 col:13 bit_pos:16 DIMM location:N0 DIMM_A0
page:0x966a9b3 offset:0x0 grain:1 syndrome:0x0 - APEI location:
node:0 card:0 module:0 rank:1 bank:0 col:13 bit_pos:16 DIMM
location:N0 DIMM_A0 status(0x0000000000000400): Storage error in
DRAM memory)
Fix this by using struct dimm_info's label string in error reports:
EDAC MC0: 1 CE Single-bit ECC on N0 DIMM_A0 (node:0 card:0 module:0
rank:1 bank:515 col:14 bit_pos:16 DIMM location:N0 DIMM_A0
page:0x99223d8 offset:0x0 grain:1 syndrome:0x0 - APEI location:
node:0 card:0 module:0 rank:1 bank:515 col:14 bit_pos:16 DIMM
location:N0 DIMM_A0 status(0x0000000000000400): Storage error in
DRAM memory)
The labels are initialized by reading the bank and device strings
from DMI. Now, the label information can also read from sysfs. E.g. a
ThunderX2 system will show the following:
/sys/devices/system/edac/mc/mc0/dimm0/dimm_label:N0 DIMM_A0
/sys/devices/system/edac/mc/mc0/dimm1/dimm_label:N0 DIMM_B0
/sys/devices/system/edac/mc/mc0/dimm2/dimm_label:N0 DIMM_C0
/sys/devices/system/edac/mc/mc0/dimm3/dimm_label:N0 DIMM_D0
/sys/devices/system/edac/mc/mc0/dimm4/dimm_label:N0 DIMM_E0
/sys/devices/system/edac/mc/mc0/dimm5/dimm_label:N0 DIMM_F0
/sys/devices/system/edac/mc/mc0/dimm6/dimm_label:N0 DIMM_G0
/sys/devices/system/edac/mc/mc0/dimm7/dimm_label:N0 DIMM_H0
/sys/devices/system/edac/mc/mc0/dimm8/dimm_label:N1 DIMM_I0
/sys/devices/system/edac/mc/mc0/dimm9/dimm_label:N1 DIMM_J0
/sys/devices/system/edac/mc/mc0/dimm10/dimm_label:N1 DIMM_K0
/sys/devices/system/edac/mc/mc0/dimm11/dimm_label:N1 DIMM_L0
/sys/devices/system/edac/mc/mc0/dimm12/dimm_label:N1 DIMM_M0
/sys/devices/system/edac/mc/mc0/dimm13/dimm_label:N1 DIMM_N0
/sys/devices/system/edac/mc/mc0/dimm14/dimm_label:N1 DIMM_O0
/sys/devices/system/edac/mc/mc0/dimm15/dimm_label:N1 DIMM_P0
Since dimm_labels can be rewritten, that label will be used in a later
error report:
# echo foobar >/sys/devices/system/edac/mc/mc0/dimm0/dimm_label
# # some error injection here
# dmesg | grep foobar
[ 751.383533] EDAC MC0: 1 CE Single-bit ECC on foobar (node:0 card:0
module:0 rank:1 bank:259 col:3 bit_pos:16 DIMM location:N0 DIMM_A0
page:0x8c8dc74 offset:0x0 grain:1 syndrome:0x0 - APEI location:
node:0 card:0 module:0 rank:1 bank:259 col:3 bit_pos:16 DIMM
location:N0 DIMM_A0 status(0x0000000000000400): Storage error in DRAM
memory)
[ bp: Remove curly brackets around a single if-statement in dimm_setup_label(). ]
Signed-off-by: Robert Richter <rrichter@marvell.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200528101307.23245-1-rrichter@marvell.com
Memset on the pointer right after malloc can cause a NULL pointer
deference if it failed to allocate memory. A simple fix is to
replace malloc()/memset() pair with a simple call to calloc().
Fixes: 0fca931a6f ("samples/bpf: program demonstrating access to xdp_rxq_info")
Signed-off-by: Gaurav Singh <gaurav1086@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
The reset-simple code lacks a reset callback that is still pretty easy to
implement. The only real thing to consider is the delay needed for a device
to be reset, so let's expose that as part of the reset-simple driver data.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The reset-simple code can be useful for drivers outside of drivers/reset
that have a few reset controls as part of their features. Let's move it to
include/linux/reset.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
In order to remove the dependency on the simple-bus compatible string,
which causes the OF driver core to register all child devices, make the
display-hub driver explicitly register the display controller children.
Signed-off-by: Thierry Reding <treding@nvidia.com>
In order to remove the dependency on the simple-bus compatible string,
which causes the OF driver core to register all child devices, make the
host1x driver explicitly register its children.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Though the unconditional enable/disable code is not a final solution,
we don't want to run into a NULL pointer situation when window group
doesn't link to its DC parent if the DC is disabled in Device Tree.
So this patch simply adds a check to make sure that window group has
a valid parent before running into tegra_windowgroup_enable/disable.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
host1x_debug_init() must be reverted in an error handling path.
This is already fixed in the remove function since commit 44156eee91
("gpu: host1x: Clean up debugfs on removal")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Qian Cai reported:
"""
When NUMA=n and nr_node_ids=2, in apply_wqattrs_prepare(), it has,
for_each_node(node) {
if (wq_calc_node_cpumask(...
where it will trigger a booting warning,
WARNING: workqueue cpumask: online intersect > possible intersect
because it found 2 nodes and wq_numa_possible_cpumask[1] is an empty
cpumask.
"""
Let NODES_SHIFT depend on NEED_MULTIPLE_NODES like it is done
on other architectures in order to fix this.
Fixes: 701dc81e74 ("s390/mm: remove fake numa support")
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
clock_getres in the vDSO library has to preserve the same behaviour
of posix_get_hrtimer_res().
In particular, posix_get_hrtimer_res() does:
sec = 0;
ns = hrtimer_resolution;
and hrtimer_resolution depends on the enablement of the high
resolution timers that can happen either at compile or at run time.
Fix the s390 vdso implementation of clock_getres keeping a copy of
hrtimer_resolution in vdso data and using that directly.
Link: https://lkml.kernel.org/r/20200324121027.21665-1-vincenzo.frascino@arm.com
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
[heiko.carstens@de.ibm.com: use llgf for proper zero extension]
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Currently, the VDSO is being linked through $(CC). This does not match
how the rest of the kernel links objects, which is through the $(LD)
variable.
When clang is built in a default configuration, it first attempts to use
the target triple's default linker, which is just ld. However, the user
can override this through the CLANG_DEFAULT_LINKER cmake define so that
clang uses another linker by default, such as LLVM's own linker, ld.lld.
This can be useful to get more optimized links across various different
projects.
However, this is problematic for the s390 vDSO because ld.lld does not
have any s390 emulatiom support:
https://github.com/llvm/llvm-project/blob/llvmorg-10.0.1-rc1/lld/ELF/Driver.cpp#L132-L150
Thus, if a user is using a toolchain with ld.lld as the default, they
will see an error, even if they have specified ld.bfd through the LD
make variable:
$ make -j"$(nproc)" -s ARCH=s390 CROSS_COMPILE=s390x-linux-gnu- LLVM=1 \
LD=s390x-linux-gnu-ld \
defconfig arch/s390/kernel/vdso64/
ld.lld: error: unknown emulation: elf64_s390
clang-11: error: linker command failed with exit code 1 (use -v to see invocation)
Normally, '-fuse-ld=bfd' could be used to get around this; however, this
can be fragile, depending on paths and variable naming. The cleaner
solution for the kernel is to take advantage of the fact that $(LD) can
be invoked directly, which bypasses the heuristics of $(CC) and respects
the user's choice. Similar changes have been done for ARM, ARM64, and
MIPS.
Link: https://lkml.kernel.org/r/20200602192523.32758-1-natechancellor@gmail.com
Link: https://github.com/ClangBuiltLinux/linux/issues/1041
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
[heiko.carstens@de.ibm.com: add --build-id flag]
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Streamline the processing of QDIO Input Queues, and remove some
intermittent SLSB updates (no deleting of old ACKs, no redundant
transitions through NOT_INIT).
Rather than counting ACKs, we now keep track of the whole batch of
SBALs that were completed during the current polling cycle.
Most completed SBALs stay in their initial state (ie. PRIMED or ERROR),
except that the most recent SBAL in each sub-run is ACKed for
IRQ reduction.
The only logic changes happen in inbound_handle_work(), the other
delta is just a renaming of the variables that track the SBAL batch.
Note that in particular we don't need to flip the _oldest_ SBAL to
an idle state (eg. NOT_INIT or ACKed) as a guard against catching our
own tail. Since get_inbound_buffer_frontier() will never scan more than
the remaining nr_buf_used SBALs, this scenario just doesn't occur.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
s390 cannot set syscall number and reture code at the same time,
so set the appropriate flag to indicate it.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
When strace wants to update the syscall number, it sets GPR2
to the desired number and updates the GPR via PTRACE_SETREGSET.
It doesn't update regs->int_code which would cause the old syscall
executed on syscall restart. As we cannot change the ptrace ABI and
don't have a field for the interruption code, check whether the tracee
is in a syscall and the last instruction was svc. In that case assume
that the tracer wants to update the syscall number and copy the GPR2
value to regs->int_code.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
tracing expects to see invalid syscalls, so pass it through.
The syscall path in entry.S checks the syscall number before
looking up the handler, so it is still safe.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The current code returns the syscall number which an invalid
syscall number is supplied and tracing is enabled. This makes
the strace testsuite fail.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Use __secure_computing() and pass the register data via
seccomp_data so secure computing doesn't have to fetch it
again.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
xchg() for a single-byte location assembles to a 4-byte Compare&Swap,
wrapped into a non-trivial amount of retry code that deals with
concurrent modifications to the unaffected bytes.
Change it to a simple byte-store, but preserve the memory ordering
semantics that the CS provided.
This simplifies the generated code for a hot path, and in theory also
allows us to amortize the memory barriers over multiple SLSB updates.
CC: Andreas Krebbel <krebbel@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
For mono channel, SSI will switch to Normal mode.
In Normal mode and Network mode, the Word Length Control bits
control the word length divider in clock generator, which is
different with I2S Master mode (the word length is fixed to
32bit), it should be the value of params_width(hw_params).
The condition "slots == 2" is not good for I2S Master mode,
because for Network mode and Normal mode, the slots can also
be 2. Then we need to use (ssi->i2s_net & SSI_SCR_I2S_MODE_MASK)
to check if it is I2S Master mode.
So we refine the formula for mono channel, otherwise there
will be sound issue for S24_LE.
Fixes: b0a7043d5c ("ASoC: fsl_ssi: Caculate bit clock rate using slot number and width")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/034eff1435ff6ce300b6c781130cefd9db22ab9a.1592276147.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
